-- Journal begins at Sun 2024-08-25 19:05:17 UTC, ends at Fri 2025-10-17 16:21:19 UTC. --
Aug 25 19:05:17 IQ138000 kernel: Booting Linux on physical CPU 0x0
Aug 25 19:05:17 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Aug 25 19:05:17 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Aug 25 19:05:17 IQ138000 kernel: CPU: div instructions available: patching division code
Aug 25 19:05:17 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Aug 25 19:05:17 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Aug 25 19:05:17 IQ138000 kernel: Memory policy: Data cache writealloc
Aug 25 19:05:17 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Aug 25 19:05:17 IQ138000 kernel: Zone ranges:
Aug 25 19:05:17 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Aug 25 19:05:17 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Aug 25 19:05:17 IQ138000 kernel: Movable zone start for each node
Aug 25 19:05:17 IQ138000 kernel: Early memory node ranges
Aug 25 19:05:17 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Aug 25 19:05:17 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Aug 25 19:05:17 IQ138000 kernel: On node 0 totalpages: 262144
Aug 25 19:05:17 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Aug 25 19:05:17 IQ138000 kernel:   Normal zone: 0 pages reserved
Aug 25 19:05:17 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Aug 25 19:05:17 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Aug 25 19:05:17 IQ138000 kernel: psci: probing for conduit method from DT.
Aug 25 19:05:17 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Aug 25 19:05:17 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Aug 25 19:05:17 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Aug 25 19:05:17 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Aug 25 19:05:17 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Aug 25 19:05:17 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Aug 25 19:05:17 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Aug 25 19:05:17 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Aug 25 19:05:17 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug 25 19:05:17 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Aug 25 19:05:17 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Aug 25 19:05:17 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Aug 25 19:05:17 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Aug 25 19:05:17 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Aug 25 19:05:17 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Aug 25 19:05:17 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Aug 25 19:05:17 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Aug 25 19:05:17 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Aug 25 19:05:17 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Aug 25 19:05:17 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Booting Linux on physical CPU 0x0
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Aug 25 19:05:17 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Aug 25 19:05:17 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU: div instructions available: patching division code
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Console: colour dummy device 80x30
Aug 25 19:05:17 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: pid_max: default: 32768 minimum: 301
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Memory policy: Data cache writealloc
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Zone ranges:
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Movable zone start for each node
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Aug 25 19:05:17 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Early memory node ranges
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Aug 25 19:05:17 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: On node 0 totalpages: 262144
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   Normal zone: 0 pages reserved
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Aug 25 19:05:17 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: CPU: Virtualization extensions available.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: psci: probing for conduit method from DT.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: devtmpfs: initialized
Aug 25 19:05:17 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 16
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Aug 25 19:05:17 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Aug 25 19:05:17 IQ138000 kernel: No ATAGs?
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: SCSI subsystem initialized
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usbfs
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver hub
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new device driver usb
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: mc: Linux media interface: v0.10
Aug 25 19:05:17 IQ138000 kernel: videodev: Linux video capture interface: v2.00
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: rcu: Hierarchical RCU implementation.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: rcu:         RCU event tracing is enabled.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: PTP clock support registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Aug 25 19:05:17 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 2
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Aug 25 19:05:17 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 1
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered udp transport module.
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered tcp transport module.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Initialise system trusted keyrings
Aug 25 19:05:17 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: NFS: Registering the id_resolver key type
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Console: colour dummy device 80x30
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Key type id_resolver registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Key type id_legacy registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: pid_max: default: 32768 minimum: 301
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Key type asymmetric registered
Aug 25 19:05:17 IQ138000 kernel: Asymmetric key parser 'x509' registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: bounce: pool size: 64 pages
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Aug 25 19:05:17 IQ138000 kernel: io scheduler mq-deadline registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU: Testing write buffer coherency: ok
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: io scheduler kyber registered
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Aug 25 19:05:17 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Aug 25 19:05:17 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Aug 25 19:05:17 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Aug 25 19:05:17 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Aug 25 19:05:17 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Aug 25 19:05:17 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Aug 25 19:05:17 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Aug 25 19:05:17 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: brd: module loaded
Aug 25 19:05:17 IQ138000 kernel: loop: module loaded
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: CPU: Virtualization extensions available.
Aug 25 19:05:17 IQ138000 kernel: devtmpfs: initialized
Aug 25 19:05:17 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Aug 25 19:05:17 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Aug 25 19:05:17 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 16
Aug 25 19:05:17 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Aug 25 19:05:17 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: No ATAGs?
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: libphy: sun4i_mii_bus: probed
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: CAN device driver interface
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: PPP generic driver version 2.4.2
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: SCSI subsystem initialized
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 25 19:05:17 IQ138000 kernel: ehci-platform: EHCI generic platform driver
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usbfs
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver hub
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform: OHCI generic platform driver
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new device driver usb
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usb-storage
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: mc: Linux media interface: v0.10
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: videodev: Linux video capture interface: v2.00
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbserial: USB Serial support registered for generic
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Aug 25 19:05:17 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Aug 25 19:05:17 IQ138000 kernel: PTP clock support registered
Aug 25 19:05:17 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Aug 25 19:05:17 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 2
Aug 25 19:05:17 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 1
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered udp transport module.
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered tcp transport module.
Aug 25 19:05:17 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 25 19:05:17 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Aug 25 19:05:17 IQ138000 kernel: Initialise system trusted keyrings
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: i2c /dev entries driver
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: NFS: Registering the id_resolver key type
Aug 25 19:05:17 IQ138000 kernel: Key type id_resolver registered
Aug 25 19:05:17 IQ138000 kernel: Key type id_legacy registered
Aug 25 19:05:17 IQ138000 kernel: Key type asymmetric registered
Aug 25 19:05:17 IQ138000 kernel: Asymmetric key parser 'x509' registered
Aug 25 19:05:17 IQ138000 kernel: bounce: pool size: 64 pages
Aug 25 19:05:17 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Aug 25 19:05:17 IQ138000 kernel: io scheduler mq-deadline registered
Aug 25 19:05:17 IQ138000 kernel: io scheduler kyber registered
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Aug 25 19:05:17 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Aug 25 19:05:17 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Aug 25 19:05:17 IQ138000 kernel: brd: module loaded
Aug 25 19:05:17 IQ138000 kernel: loop: module loaded
Aug 25 19:05:17 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Aug 25 19:05:17 IQ138000 kernel: CAN device driver interface
Aug 25 19:05:17 IQ138000 kernel: PPP generic driver version 2.4.2
Aug 25 19:05:17 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 25 19:05:17 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Aug 25 19:05:17 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 25 19:05:17 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Aug 25 19:05:17 IQ138000 kernel: usbserial: USB Serial support registered for generic
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Aug 25 19:05:17 IQ138000 kernel: i2c /dev entries driver
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Aug 25 19:05:17 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usbhid
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usbhid: USB HID core driver
Aug 25 19:05:17 IQ138000 kernel: Initializing XFRM netlink socket
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 10
Aug 25 19:05:17 IQ138000 kernel: Segment Routing with IPv6
Aug 25 19:05:17 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 17
Aug 25 19:05:17 IQ138000 kernel: can: controller area network core
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 29
Aug 25 19:05:17 IQ138000 kernel: can: raw protocol
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: can: broadcast manager protocol
Aug 25 19:05:17 IQ138000 kernel: can: netlink gateway - max_hops=1
Aug 25 19:05:17 IQ138000 kernel: can: SAE J1939
Aug 25 19:05:17 IQ138000 kernel: Key type dns_resolver registered
Aug 25 19:05:17 IQ138000 kernel: Registering SWP/SWPB emulation handler
Aug 25 19:05:17 IQ138000 kernel: registered taskstats version 1
Aug 25 19:05:17 IQ138000 kernel: Loading compiled-in X.509 certificates
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Aug 25 19:05:17 IQ138000 kernel: printk: console [ttyS0] disabled
Aug 25 19:05:17 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Aug 25 19:05:17 IQ138000 kernel: printk: console [ttyS0] enabled
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Aug 25 19:05:17 IQ138000 kernel: usbcore: registered new interface driver usbhid
Aug 25 19:05:17 IQ138000 kernel: usbhid: USB HID core driver
Aug 25 19:05:17 IQ138000 kernel: Initializing XFRM netlink socket
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 10
Aug 25 19:05:17 IQ138000 kernel: Segment Routing with IPv6
Aug 25 19:05:17 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 17
Aug 25 19:05:17 IQ138000 kernel: can: controller area network core
Aug 25 19:05:17 IQ138000 kernel: NET: Registered protocol family 29
Aug 25 19:05:17 IQ138000 kernel: can: raw protocol
Aug 25 19:05:17 IQ138000 kernel: can: broadcast manager protocol
Aug 25 19:05:17 IQ138000 kernel: can: netlink gateway - max_hops=1
Aug 25 19:05:17 IQ138000 kernel: can: SAE J1939
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: Key type dns_resolver registered
Aug 25 19:05:17 IQ138000 kernel: Registering SWP/SWPB emulation handler
Aug 25 19:05:17 IQ138000 kernel: registered taskstats version 1
Aug 25 19:05:17 IQ138000 kernel: Loading compiled-in X.509 certificates
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: wbec spi0.0: wrong wbec ID at 0x0. Get 0x0 istead of 0x3CD2
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: wbec: probe of spi0.0 failed with error -524
Aug 25 19:05:17 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: libphy: sun4i_mii_bus: probed
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Aug 25 19:05:17 IQ138000 kernel: printk: console [ttyS0] disabled
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Aug 25 19:05:17 IQ138000 kernel: printk: console [ttyS0] enabled
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: wbec spi0.0: wrong wbec ID at 0x0. Get 0x0 istead of 0x3CD2
Aug 25 19:05:17 IQ138000 kernel: wbec: probe of spi0.0 failed with error -524
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Aug 25 19:05:17 IQ138000 kernel: libphy: sun4i_mii_bus: probed
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Aug 25 19:05:17 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Aug 25 19:05:17 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Aug 25 19:05:17 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Aug 25 19:05:17 IQ138000 kernel: tv: supplied by regulator-dummy
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Aug 25 19:05:17 IQ138000 kernel: aldo2: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: eldo1: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: eldo2: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Aug 25 19:05:17 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Aug 25 19:05:17 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dldo2: supplied by regulator-dummy
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dldo3: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dldo4: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Aug 25 19:05:17 IQ138000 kernel: random: fast init done
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Aug 25 19:05:17 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Aug 25 19:05:17 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Aug 25 19:05:17 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Aug 25 19:05:17 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Aug 25 19:05:17 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Aug 25 19:05:17 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Aug 25 19:05:17 IQ138000 kernel: tv: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Aug 25 19:05:17 IQ138000 kernel: aldo2: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: eldo1: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: eldo2: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Aug 25 19:05:17 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Aug 25 19:05:17 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dldo2: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dldo3: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: dldo4: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Aug 25 19:05:17 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Aug 25 19:05:17 IQ138000 kernel: random: fast init done
Aug 25 19:05:17 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Aug 25 19:05:17 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Aug 25 19:05:17 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Aug 25 19:05:17 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Aug 25 19:05:17 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Aug 25 19:05:17 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Aug 25 19:05:17 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Aug 25 19:05:17 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Aug 25 19:05:17 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Aug 25 19:05:17 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Aug 25 19:05:17 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Aug 25 19:05:17 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Aug 25 19:05:17 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Aug 25 19:05:17 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Aug 25 19:05:17 IQ138000 kernel: libphy: stmmac: probed
Aug 25 19:05:17 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Aug 25 19:05:17 IQ138000 kernel: libphy: stmmac: probed
Aug 25 19:05:17 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 1-0:1.0: USB hub found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 1-0:1.0: 1 port detected
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 1-0:1.0: USB hub found
Aug 25 19:05:17 IQ138000 kernel: hub 1-0:1.0: 1 port detected
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 2-0:1.0: USB hub found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 2-0:1.0: USB hub found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 2-0:1.0: 1 port detected
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Aug 25 19:05:17 IQ138000 kernel: hub 3-0:1.0: USB hub found
Aug 25 19:05:17 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 4-0:1.0: USB hub found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 4-0:1.0: 1 port detected
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 3-0:1.0: USB hub found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 3-0:1.0: 1 port detected
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 5-0:1.0: USB hub found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 5-0:1.0: 1 port detected
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 4-0:1.0: USB hub found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 4-0:1.0: 1 port detected
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 6-0:1.0: USB hub found
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Aug 25 19:05:17 IQ138000 kernel: of_cfs_init
Aug 25 19:05:17 IQ138000 kernel: of_cfs_init: OK
Aug 25 19:05:17 IQ138000 kernel: ALSA device list:
Aug 25 19:05:17 IQ138000 kernel:   No soundcards found.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 5-0:1.0: USB hub found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 5-0:1.0: 1 port detected
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Aug 25 19:05:17 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Aug 25 19:05:17 IQ138000 kernel: devtmpfs: mounted
Aug 25 19:05:17 IQ138000 kernel: Freeing unused kernel memory: 1024K
Aug 25 19:05:17 IQ138000 kernel: Run /sbin/init as init process
Aug 25 19:05:17 IQ138000 kernel:   with arguments:
Aug 25 19:05:17 IQ138000 kernel:     /sbin/init
Aug 25 19:05:17 IQ138000 kernel:   with environment:
Aug 25 19:05:17 IQ138000 kernel:     HOME=/
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel:     TERM=linux
Aug 25 19:05:17 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Aug 25 19:05:17 IQ138000 systemd[1]: System time before build time, advancing clock.
Aug 25 19:05:17 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Aug 25 19:05:17 IQ138000 systemd[1]: Detected architecture arm.
Aug 25 19:05:17 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Aug 25 19:05:17 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Aug 25 19:05:17 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-getty.slice.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Aug 25 19:05:17 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice User and Session Slice.
Aug 25 19:05:17 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Aug 25 19:05:17 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Paths.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Remote File Systems.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Slices.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on Journal Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on udev Control Socket.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Aug 25 19:05:17 IQ138000 kernel: fuse: init (API version 7.32)
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Starting File System Check on Root Device...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Journal Service...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load Kernel Modules...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Aug 25 19:05:17 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Aug 25 19:05:17 IQ138000 systemd-journald[139]: Journal started
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 6-0:1.0: USB hub found
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Aug 25 19:05:17 IQ138000 kernel: of_cfs_init
Aug 25 19:05:17 IQ138000 kernel: of_cfs_init: OK
Aug 25 19:05:17 IQ138000 kernel: ALSA device list:
Aug 25 19:05:17 IQ138000 kernel:   No soundcards found.
Aug 25 19:05:17 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Aug 25 19:05:17 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Aug 25 19:05:17 IQ138000 kernel: devtmpfs: mounted
Aug 25 19:05:17 IQ138000 kernel: Freeing unused kernel memory: 1024K
Aug 25 19:05:17 IQ138000 kernel: Run /sbin/init as init process
Aug 25 19:05:17 IQ138000 kernel:   with arguments:
Aug 25 19:05:17 IQ138000 kernel:     /sbin/init
Aug 25 19:05:17 IQ138000 kernel:   with environment:
Aug 25 19:05:17 IQ138000 kernel:     HOME=/
Aug 25 19:05:17 IQ138000 kernel:     TERM=linux
Aug 25 19:05:17 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Aug 25 19:05:17 IQ138000 systemd[1]: System time before build time, advancing clock.
Aug 25 19:05:17 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Aug 25 19:05:17 IQ138000 systemd[1]: Detected architecture arm.
Aug 25 19:05:17 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Aug 25 19:05:17 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Aug 25 19:05:17 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-getty.slice.
Aug 25 19:05:17 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Aug 25 19:05:17 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Aug 25 19:05:17 IQ138000 systemd[1]: Created slice User and Session Slice.
Aug 25 19:05:17 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Aug 25 19:05:17 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Paths.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Remote File Systems.
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Slices.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on Journal Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on udev Control Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Aug 25 19:05:17 IQ138000 kernel: fuse: init (API version 7.32)
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Starting File System Check on Root Device...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Journal Service...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load Kernel Modules...
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Aug 25 19:05:17 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Aug 25 19:05:17 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished File System Check on Root Device.
Aug 25 19:05:17 IQ138000 systemd-journald[140]: Journal started
Aug 25 19:05:17 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Started Journal Service.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
Aug 25 19:05:17 IQ138000 systemd[1]: Started Journal Service.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Load Kernel Modules.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished File System Check on Root Device.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Load Kernel Modules.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting FUSE Control File System...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Mounting FUSE Control File System...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Started File System Check Daemon to report status.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Started File System Check Daemon to report status.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Apply Kernel Variables...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Apply Kernel Variables...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted FUSE Control File System.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Mounted FUSE Control File System.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Apply Kernel Variables.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Apply Kernel Variables.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Aug 25 19:05:17 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load/Save Random Seed...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Load/Save Random Seed...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Create System Users...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Create System Users...
Aug 25 19:05:17 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Create System Users.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Create System Users.
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:17 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Aug 25 19:05:18 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 kernel: usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:18 IQ138000 kernel: usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: Core ver 2.22
Aug 25 19:05:18 IQ138000 kernel: NET: Registered protocol family 31
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Aug 25 19:05:18 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Aug 25 19:05:18 IQ138000 kernel: usbcore: registered new interface driver btusb
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: Core ver 2.22
Aug 25 19:05:18 IQ138000 kernel: NET: Registered protocol family 31
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Aug 25 19:05:18 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: SCO socket layer initialized
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Aug 25 19:05:19 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Aug 25 19:05:19 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Aug 25 19:05:19 IQ138000 kernel: usbcore: registered new interface driver btusb
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 systemd-udevd[163]: eth1: Failed to query device driver: Device or resource busy
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Aug 25 19:05:19 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Aug 25 19:05:19 IQ138000 systemd-udevd[163]: eth1: Failed to query device driver: Device or resource busy
Aug 25 19:05:19 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Aug 25 19:05:19 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Aug 25 19:05:19 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Aug 25 19:05:19 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Aug 25 19:05:19 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Aug 25 19:05:19 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 systemd[1]: Found device /dev/ttyS0.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 systemd[1]: Found device /dev/ttyS0.
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Aug 25 19:05:19 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Aug 25 19:05:19 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Aug 25 19:05:19 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Aug 25 19:05:19 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Aug 25 19:05:19 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Aug 25 19:05:19 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 25 19:05:19 IQ138000 systemd-udevd[157]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Aug 25 19:05:19 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Aug 25 19:05:19 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Aug 25 19:05:19 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Aug 25 19:05:19 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:19 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Aug 25 19:05:19 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Aug 25 19:05:19 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Aug 25 19:05:19 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Aug 25 19:05:19 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Aug 25 19:05:19 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 25 19:05:19 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 25 19:05:19 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Aug 25 19:05:20 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Aug 25 19:05:20 IQ138000 systemd[1]: Reached target Swap.
Aug 25 19:05:20 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Aug 25 19:05:20 IQ138000 systemd-fsck[212]: data: recovering journal
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Aug 25 19:05:20 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd-fsck[212]: data: clean, 16466/328656 files, 368069/1313536 blocks
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Aug 25 19:05:20 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Reached target Swap.
Aug 25 19:05:20 IQ138000 systemd-fsck[213]: data: recovering journal
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Mounting /mnt/data...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd-fsck[213]: data: clean, 16469/328656 files, 374220/1313536 blocks
Aug 25 19:05:20 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Aug 25 19:05:20 IQ138000 systemd[1]: Mounted /mnt/data.
Aug 25 19:05:20 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Mounting /mnt/data...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Mounting /var/log...
Aug 25 19:05:20 IQ138000 systemd[1]: Mounted /var/log.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Mounted /mnt/data.
Aug 25 19:05:20 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Reached target Local File Systems.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Aug 25 19:05:20 IQ138000 systemd[1]: Mounting /var/log...
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Mounted /var/log.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.847ms for 445 entries.
Aug 25 19:05:20 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 484.3M, max 496.6M, 12.3M free.
-- Boot d03a8aa6622b4128a3ce48a0a3ae8a35 --
Aug 25 19:05:20 IQ138000 systemd[1]: Reached target Local File Systems.
Aug 25 19:05:20 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Aug 25 19:05:20 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 45.333ms for 445 entries.
-- Boot bf7a123efe1a40bcb89ebf1199d7b1ca --
Aug 25 19:05:20 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Aug 25 19:05:20 IQ138000 wb-configs-early[219]: Checking symlinks to /mnt/data
Aug 25 19:05:20 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Aug 25 19:05:20 IQ138000 kernel: random: crng init done
Aug 25 19:05:20 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Aug 25 19:05:20 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Aug 25 19:05:20 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Aug 25 19:05:21 IQ138000 wb-configs-early[219]: /etc/wb-cloud-agent: unable to find file to fix broken state
Aug 25 19:05:21 IQ138000 wb-configs-early[219]: Setting ownership www-data to /mnt/data/uploads
Aug 25 19:05:21 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Aug 25 19:05:21 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Aug 25 19:05:21 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Aug 25 19:05:21 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Aug 25 19:05:21 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Aug 25 19:05:21 IQ138000 systemd[1]: Reached target System Initialization.
Aug 25 19:05:21 IQ138000 systemd[1]: apt-daily.timer: Not using persistent file timestamp Sat 2025-10-11 11:34:38 UTC as it is in the future.
Aug 25 19:05:21 IQ138000 systemd[1]: Started Daily apt download activities.
Aug 25 19:05:21 IQ138000 systemd[1]: apt-daily-upgrade.timer: Not using persistent file timestamp Sat 2025-10-11 06:06:04 UTC as it is in the future.
Aug 25 19:05:21 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Aug 25 19:05:21 IQ138000 systemd[1]: e2scrub_all.timer: Not using persistent file timestamp Sat 2025-10-11 06:16:41 UTC as it is in the future.
Aug 25 19:05:21 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Aug 25 19:05:21 IQ138000 systemd[1]: fstrim.timer: Not using persistent file timestamp Mon 2025-10-06 02:13:37 UTC as it is in the future.
Aug 25 19:05:21 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Aug 25 19:05:21 IQ138000 systemd[1]: logrotate.timer: Not using persistent file timestamp Sat 2025-10-11 06:16:41 UTC as it is in the future.
Aug 25 19:05:21 IQ138000 systemd[1]: Started Daily rotation of log files.
Aug 25 19:05:21 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Aug 25 19:05:21 IQ138000 systemd[1]: Reached target Timers.
Aug 25 19:05:21 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Aug 25 19:05:21 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Aug 25 19:05:21 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Aug 25 19:05:21 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Aug 25 19:05:22 IQ138000 systemd[1]: Reached target Sockets.
Aug 25 19:05:22 IQ138000 systemd[1]: Reached target Basic System.
Aug 25 19:05:22 IQ138000 systemd[1]: System is tainted: local-hwclock
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Bluetooth service...
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Device Configuration Service...
Aug 25 19:05:22 IQ138000 systemd[1]: Started Regular background program processing daemon.
Aug 25 19:05:22 IQ138000 cron[296]: (CRON) INFO (pidfile fd = 3)
Aug 25 19:05:22 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Aug 25 19:05:22 IQ138000 cron[296]: (CRON) INFO (Running @reboot jobs)
Aug 25 19:05:22 IQ138000 bluetoothd[293]: Bluetooth daemon 5.55
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Network Manager...
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Aug 25 19:05:22 IQ138000 bluetoothd[293]: Starting SDP server
Aug 25 19:05:22 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Aug 25 19:05:22 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Aug 25 19:05:22 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 25 19:05:22 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Aug 25 19:05:22 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Aug 25 19:05:22 IQ138000 bluetoothd[293]: Bluetooth management interface 1.18 initialized
Aug 25 19:05:22 IQ138000 dbus-daemon[297]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=293 comm="/usr/libexec/bluetooth/bluetoothd ")
Aug 25 19:05:22 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Aug 25 19:05:22 IQ138000 bluetoothd[293]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Aug 25 19:05:22 IQ138000 bluetoothd[293]: sap-server: Operation not permitted (1)
Aug 25 19:05:22 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Authorization Manager...
Aug 25 19:05:22 IQ138000 wb-watchdog[323]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Aug 25 19:05:22 IQ138000 migrate.sh[321]: Error: No such file or directory
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Aug 25 19:05:22 IQ138000 systemd[1]: Starting User command preprocessor...
Aug 25 19:05:22 IQ138000 migrate.sh[334]: Error: No such file or directory
Aug 25 19:05:22 IQ138000 systemd[1]: Starting User Login Management...
Aug 25 19:05:22 IQ138000 migrate.sh[348]: Error: No such file or directory
Aug 25 19:05:22 IQ138000 systemd[1]: Starting User command handler service...
Aug 25 19:05:22 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Aug 25 19:05:22 IQ138000 polkitd[325]: started daemon version 0.105 using authority implementation `local' version `0.105'
Aug 25 19:05:22 IQ138000 systemd[1]: Started watch config files.
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Aug 25 19:05:22 IQ138000 migrate.sh[354]: Error: No such file or directory
Aug 25 19:05:22 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Aug 25 19:05:22 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Aug 25 19:05:22 IQ138000 rules-preprocessor[336]: terminate called after throwing an instance of 'std::runtime_error'
Aug 25 19:05:22 IQ138000 rules-preprocessor[336]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Aug 25 19:05:22 IQ138000 migrate.sh[368]: Error: No such file or directory
Aug 25 19:05:22 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Successfully dropped root privileges.
Aug 25 19:05:22 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: avahi-daemon 0.8 starting up.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Successfully called chroot().
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Successfully dropped remaining capabilities.
Aug 25 19:05:22 IQ138000 systemd[1]: Starting WPA supplicant...
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: No service file found in /etc/avahi/services.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv6 for mDNS.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv4 for mDNS.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Network interface enumeration completed.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Registering new address record for ::1 on lo.*.
Aug 25 19:05:22 IQ138000 avahi-daemon[366]: Registering new address record for 127.0.0.1 on lo.IPv4.
Aug 25 19:05:22 IQ138000 wb-watch-configs[382]: Watched dirs: /etc /etc/network
Aug 25 19:05:22 IQ138000 systemd[1]: Starting Zigbee available emulator...
Aug 25 19:05:22 IQ138000 systemd-logind[344]: New seat seat0.
Aug 25 19:05:22 IQ138000 systemd[1]: Started Device Configuration Service.
Aug 25 19:05:23 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Aug 25 19:05:23 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Aug 25 19:05:23 IQ138000 wpa_supplicant[383]: Successfully initialized wpa_supplicant
Aug 25 19:05:23 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:23 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Aug 25 19:05:23 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Aug 25 19:05:23 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Aug 25 19:05:23 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:23 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Aug 25 19:05:23 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Aug 25 19:05:23 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 25 19:05:23 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Aug 25 19:05:23 IQ138000 systemd[1]: Failed to start User command preprocessor.
Aug 25 19:05:23 IQ138000 config-manager[294]: terminate called after throwing an instance of 'std::runtime_error'
Aug 25 19:05:23 IQ138000 config-manager[294]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Aug 25 19:05:23 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:23 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Aug 25 19:05:23 IQ138000 systemd[1]: Failed to start User command handler service.
Aug 25 19:05:23 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Aug 25 19:05:23 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Aug 25 19:05:23 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Aug 25 19:05:23 IQ138000 systemd[1]: Started IQnergy controller configurator.
Aug 25 19:05:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Aug 25 19:05:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Aug 25 19:05:23 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Aug 25 19:05:23 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.systemd1'
Aug 25 19:05:23 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Aug 25 19:05:23 IQ138000 systemd[1]: Started Authorization Manager.
Aug 25 19:05:23 IQ138000 systemd[1]: Started Bluetooth service.
Aug 25 19:05:23 IQ138000 monit[318]: Starting daemon monitor: monit.
Aug 25 19:05:23 IQ138000 avahi-daemon[366]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3600807208.
Aug 25 19:05:23 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Aug 25 19:05:23 IQ138000 systemd[1]: Started User Login Management.
Aug 25 19:05:23 IQ138000 systemd[1]: Started WPA supplicant.
Aug 25 19:05:23 IQ138000 systemd[1]: Reached target Bluetooth.
Aug 25 19:05:23 IQ138000 NetworkManager[412]: <info>  [1724612723.7959] NetworkManager (version 1.42.4) is starting... (boot:bf7a123e-fe1a-40bc-b89e-bf1199d7b1ca)
Aug 25 19:05:23 IQ138000 NetworkManager[412]: <info>  [1724612723.7965] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Aug 25 19:05:23 IQ138000 NetworkManager[412]: <info>  [1724612723.8380] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Aug 25 19:05:23 IQ138000 systemd[1]: Starting Modem Manager...
Aug 25 19:05:23 IQ138000 systemd[1]: Starting Hostname Service...
Aug 25 19:05:23 IQ138000 NetworkManager[412]: <info>  [1724612723.9326] manager[0x6b7128]: monitoring kernel firmware directory '/lib/firmware'.
Aug 25 19:05:23 IQ138000 systemd[1]: Started Network Manager.
Aug 25 19:05:23 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Aug 25 19:05:24 IQ138000 ModemManager[504]: <info>  ModemManager (version 1.20.0) starting in system bus...
Aug 25 19:05:24 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 25 19:05:24 IQ138000 systemd[1]: Started Hostname Service.
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.3576] hostname: hostname: using hostnamed
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.3579] hostname: static hostname changed from (none) to "IQ138000"
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.3615] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.3793] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.3864] manager[0x6b7128]: rfkill: Wi-Fi hardware radio set enabled
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.3866] manager[0x6b7128]: rfkill: WWAN hardware radio set enabled
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4270] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4361] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4401] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4790] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4834] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4871] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4888] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.4903] manager: Networking is enabled by state file
Aug 25 19:05:24 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=412 comm="/usr/sbin/NetworkManager --no-daemon ")
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.5010] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.5023] settings: Loaded settings plugin: keyfile (internal)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.5036] ifupdown: management mode: unmanaged
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.5048] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.5063] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Aug 25 19:05:24 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Aug 25 19:05:24 IQ138000 systemd[1]: Started Modem Manager.
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.5987] dhcp: init: Using DHCP client 'internal'
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.6015] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Aug 25 19:05:24 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Aug 25 19:05:24 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.6321] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.6481] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.6609] device (lo): Activation: starting connection 'lo' (43b9e78a-c042-4779-a051-58ef319776ed)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.6778] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Aug 25 19:05:24 IQ138000 NetworkManager[412]: <info>  [1724612724.6850] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.0536] device (eth1): driver '(null)' does not support carrier detection.
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.0558] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.0623] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.0689] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:25 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Aug 25 19:05:25 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Aug 25 19:05:25 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Aug 25 19:05:25 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Aug 25 19:05:25 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Aug 25 19:05:25 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.2633] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.2690] device (wlan0): driver supports Access Point (AP) mode
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.2759] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Aug 25 19:05:25 IQ138000 NetworkManager[412]: <info>  [1724612725.2785] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.2521] device (wlan1): driver supports Access Point (AP) mode
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.2573] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.2626] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.3338] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.3435] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.3475] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 wpa_supplicant[383]: nl80211: kernel reports: Authentication algorithm number required
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.3860] modem-manager: ModemManager available
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.3935] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.4099] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.4131] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.4235] device (lo): Activation: successful, device activated.
Aug 25 19:05:26 IQ138000 wpa_supplicant[383]: nl80211: kernel reports: Authentication algorithm number required
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7112] device (wlan0): supplicant interface state: internal-starting -> disconnected
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7120] Wi-Fi P2P device controlled by interface wlan0 created
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7142] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7168] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7204] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7249] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7511] device (wlan1): supplicant interface state: internal-starting -> disconnected
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7540] Wi-Fi P2P device controlled by interface wlan1 created
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7604] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7646] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7772] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Aug 25 19:05:26 IQ138000 NetworkManager[412]: <info>  [1724612726.7865] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:27 IQ138000 ModemManager[504]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Aug 25 19:05:27 IQ138000 ModemManager[504]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Aug 25 19:05:27 IQ138000 ModemManager[504]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Aug 25 19:05:31 IQ138000 init.sh[1836]: Initializing wb72-mod1:wbe2r-r-zigbee.
Aug 25 19:05:31 IQ138000 init.sh[1856]: In file included from -:16:
Aug 25 19:05:31 IQ138000 init.sh[1856]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:31 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Aug 25 19:05:31 IQ138000 init.sh[1836]: ...Initializing wb72-wbc:wbc-4g-usb.
Aug 25 19:05:31 IQ138000 init.sh[1836]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Aug 25 19:05:31 IQ138000 init.sh[1948]: In file included from -:11:
Aug 25 19:05:31 IQ138000 init.sh[1948]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:31 IQ138000 init.sh[1836]: ...
Aug 25 19:05:31 IQ138000 init.sh[1971]: In file included from -:11:
Aug 25 19:05:31 IQ138000 init.sh[1971]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:32 IQ138000 init.sh[1836]: failsafe bias enabled
Aug 25 19:05:32 IQ138000 init.sh[1836]: terminators are enabled
Aug 25 19:05:32 IQ138000 init.sh[1836]: Initializing wb74-rs485-2:wb67-can-rs485.
Aug 25 19:05:32 IQ138000 init.sh[2087]: In file included from -:24:
Aug 25 19:05:32 IQ138000 init.sh[2087]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:32 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Aug 25 19:05:33 IQ138000 init.sh[1836]: ...
Aug 25 19:05:33 IQ138000 init.sh[2111]: In file included from -:24:
Aug 25 19:05:33 IQ138000 init.sh[2111]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:33 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:33 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Aug 25 19:05:33 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Aug 25 19:05:33 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Aug 25 19:05:33 IQ138000 reverse-ssh.sh[2162]: Error: No such file or directory
Aug 25 19:05:33 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:33 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Aug 25 19:05:33 IQ138000 init.sh[1836]: failsafe bias enabled
Aug 25 19:05:34 IQ138000 init.sh[1836]: terminators are enabled
Aug 25 19:05:34 IQ138000 init.sh[1836]: Initializing wb74-w1:wb6-wx-1wire.
Aug 25 19:05:34 IQ138000 init.sh[2241]: In file included from -:11:
Aug 25 19:05:34 IQ138000 init.sh[2241]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:34 IQ138000 init.sh[1836]: ...Initializing wb74-w2:wb6-wx-1wire.
Aug 25 19:05:34 IQ138000 init.sh[2278]: In file included from -:11:
Aug 25 19:05:34 IQ138000 init.sh[2278]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Aug 25 19:05:34 IQ138000 init.sh[1836]: ...
Aug 25 19:05:34 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Aug 25 19:05:34 IQ138000 systemd[1]: Starting Raise network interfaces...
Aug 25 19:05:34 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Aug 25 19:05:34 IQ138000 systemd[1]: Starting Power on GSM modem...
Aug 25 19:05:34 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Aug 25 19:05:35 IQ138000 systemd[1]: Finished Raise network interfaces.
Aug 25 19:05:35 IQ138000 systemd[1]: Reached target Network.
Aug 25 19:05:35 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Aug 25 19:05:35 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Aug 25 19:05:35 IQ138000 systemd[1]: Starting KNX Daemon...
Aug 25 19:05:35 IQ138000 systemd[1]: Started Live Syncing Daemon.
Aug 25 19:05:35 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Aug 25 19:05:35 IQ138000 lsyncd[2457]: 19:05:35 Normal: --- Startup ---
Aug 25 19:05:35 IQ138000 lsyncd[2457]: 19:05:35 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Aug 25 19:05:35 IQ138000 lsyncd[2457]: journal
Aug 25 19:05:35 IQ138000 lsyncd[2457]: messages
Aug 25 19:05:35 IQ138000 lsyncd[2457]: iq_network_manager/iq_network_manager.log
Aug 25 19:05:35 IQ138000 systemd[1]: Starting Network Time Service...
Aug 25 19:05:35 IQ138000 knxd[2452]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Aug 25 19:05:35 IQ138000 knxd[2452]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Aug 25 19:05:35 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Aug 25 19:05:35 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Aug 25 19:05:35 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Aug 25 19:05:35 IQ138000 systemd[1]: Starting Permit User Sessions...
Aug 25 19:05:35 IQ138000 lsyncd[2479]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Aug 25 19:05:35 IQ138000 lsyncd[2470]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Aug 25 19:05:35 IQ138000 lsyncd[2470]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Aug 25 19:05:35 IQ138000 ntpd[2467]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Aug 25 19:05:35 IQ138000 lsyncd[2457]: 19:05:35 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Aug 25 19:05:35 IQ138000 ntpd[2467]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Aug 25 19:05:35 IQ138000 ntpd[2467]: ----------------------------------------------------
Aug 25 19:05:35 IQ138000 ntpd[2467]: ntp-4 is maintained by Network Time Foundation,
Aug 25 19:05:35 IQ138000 ntpd[2467]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Aug 25 19:05:35 IQ138000 ntpd[2467]: corporation.  Support and training for ntp-4 are
Aug 25 19:05:35 IQ138000 ntpd[2467]: available at https://www.nwtime.org/support
Aug 25 19:05:35 IQ138000 ntpd[2467]: ----------------------------------------------------
Aug 25 19:05:35 IQ138000 persist_meter_data.sh[2496]: Error: No such file or directory
Aug 25 19:05:35 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Aug 25 19:05:35 IQ138000 ntpd[2497]: proto: precision = 1.000 usec (-20)
Aug 25 19:05:35 IQ138000 ntpd[2497]: basedate set to 2020-09-11
Aug 25 19:05:35 IQ138000 ntpd[2497]: gps base set to 2020-09-13 (week 2123)
Aug 25 19:05:35 IQ138000 ntpd[2497]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Aug 25 19:05:35 IQ138000 ntpd[2497]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Aug 25 19:05:35 IQ138000 ntpd[2497]: Listen and drop on 0 v6wildcard [::]:123
Aug 25 19:05:35 IQ138000 ntpd[2497]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Aug 25 19:05:35 IQ138000 ntpd[2497]: Listen normally on 2 lo 127.0.0.1:123
Aug 25 19:05:35 IQ138000 ntpd[2497]: Listen normally on 3 lo [::1]:123
Aug 25 19:05:35 IQ138000 ntpd[2497]: Listening on routing socket on fd #20 for interface updates
Aug 25 19:05:35 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Aug 25 19:05:35 IQ138000 wb-connection-manager[2312]: Connection LegacyWiFi not found, skipping
Aug 25 19:05:35 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Aug 25 19:05:35 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Aug 25 19:05:35 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Aug 25 19:05:35 IQ138000 wb-connection-manager[2312]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Aug 25 19:05:36 IQ138000 systemd[1]: Starting Health monitor service...
Aug 25 19:05:36 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Aug 25 19:05:36 IQ138000 systemd[1]: Started zigbee2mqtt.
Aug 25 19:05:36 IQ138000 wb-knxd-config.sh[2325]: No /dev/ttyKNX found, disabling level2
Aug 25 19:05:36 IQ138000 wb-knxd-config.sh[2325]: Restart knxd
Aug 25 19:05:36 IQ138000 wb-connection-manager[2312]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Aug 25 19:05:36 IQ138000 wb-mqtt-w1[2529]: MQTT broker localhost:1883
Aug 25 19:05:36 IQ138000 wb-mqtt-w1[2529]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:36 IQ138000 wb-mqtt-w1[2529]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Aug 25 19:05:36 IQ138000 wb-mqtt-w1[2529]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Aug 25 19:05:36 IQ138000 wb-mqtt-w1[2529]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Aug 25 19:05:36 IQ138000 systemd[1]: Started KNX Daemon.
Aug 25 19:05:36 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Aug 25 19:05:36 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Aug 25 19:05:36 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Aug 25 19:05:36 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Aug 25 19:05:36 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Aug 25 19:05:36 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Aug 25 19:05:36 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:36 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Aug 25 19:05:36 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Aug 25 19:05:36 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Aug 25 19:05:36 IQ138000 systemd[1]: Started Network Time Service.
Aug 25 19:05:36 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:36 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Aug 25 19:05:36 IQ138000 systemd[1]: Finished Permit User Sessions.
Aug 25 19:05:36 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Aug 25 19:05:36 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Aug 25 19:05:36 IQ138000 systemd[1]: Failed to start Health monitor service.
Aug 25 19:05:36 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Aug 25 19:05:36 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Aug 25 19:05:36 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Aug 25 19:05:36 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Aug 25 19:05:36 IQ138000 systemd[1]: Dependency failed for User command handler service.
Aug 25 19:05:36 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Aug 25 19:05:36 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Aug 25 19:05:36 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Aug 25 19:05:36 IQ138000 ntpd[2497]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Aug 25 19:05:36 IQ138000 vnstatd[2504]: Info: vnStat daemon 2.6 started. (pid:2504 uid:110 gid:117 64-bit)
Aug 25 19:05:36 IQ138000 vnstatd[2504]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Aug 25 19:05:36 IQ138000 vnstatd[2504]: Info: Latest database update is in the future (db: 2025-10-11 23:26:42 > now: 2024-08-25 19:05:36). Giving the system clock up to 5 minutes to sync before continuing.
Aug 25 19:05:36 IQ138000 sshd[2593]: Server listening on 0.0.0.0 port 22.
Aug 25 19:05:36 IQ138000 sshd[2593]: Server listening on :: port 22.
Aug 25 19:05:36 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Aug 25 19:05:36 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Aug 25 19:05:36 IQ138000 systemd[1]: Started Getty on tty1.
Aug 25 19:05:37 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Aug 25 19:05:37 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Aug 25 19:05:37 IQ138000 systemd[1]: Reached target Login Prompts.
Aug 25 19:05:37 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Aug 25 19:05:37 IQ138000 NetworkManager[412]: <error> [1724612737.2147] audit: failed to open auditd socket: Protocol not supported
Aug 25 19:05:37 IQ138000 NetworkManager[412]: <info>  [1724612737.2150] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=2312 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Aug 25 19:05:37 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Aug 25 19:05:37 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.724s CPU time.
Aug 25 19:05:37 IQ138000 wb-connection-manager[2312]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Aug 25 19:05:37 IQ138000 wb-adjust-systime[2709]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Aug 25 19:05:37 IQ138000 systemd[1]: Stopped KNX Daemon.
Aug 25 19:05:37 IQ138000 systemd[1]: Starting KNX Daemon...
Aug 25 19:05:37 IQ138000 NetworkManager[412]: <info>  [1724612737.5317] device (wlan1): supplicant interface state: disconnected -> inactive
Aug 25 19:05:37 IQ138000 NetworkManager[412]: <info>  [1724612737.5319] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> inactive
Aug 25 19:05:37 IQ138000 wb-adjust-systime[2709]: Drift file is valid (was recently edited)
Aug 25 19:05:37 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Aug 25 19:05:37 IQ138000 knxd[2756]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Aug 25 19:05:37 IQ138000 systemd[1]: Started KNX Daemon.
Aug 25 19:05:37 IQ138000 knxd[2756]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Aug 25 19:05:37 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Aug 25 19:05:37 IQ138000 ntpd[2497]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Warning: Error resolving bridge address: Name or service not known.
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Aug 25 19:05:37 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Aug 25 19:05:37 IQ138000 mosquitto[2745]: 1724612737: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Aug 25 19:05:37 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:37 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Aug 25 19:05:37 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Aug 25 19:05:37 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Aug 25 19:05:37 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Aug 25 19:05:38 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:38 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:38 IQ138000 systemd[1]: Starting "IQ network manager"...
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.0810] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.0815] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=2312 uid=0 result="success"
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.0822] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.0842] manager: NetworkManager state is now CONNECTING
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.1200] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.1313] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.1332] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.1767] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2020] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2109] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2131] Config: added 'ssid' value 'service_iqnergy_ap'
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2144] Config: added 'scan_ssid' value '1'
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2160] Config: added 'bgscan' value 'simple:30:-70:86400'
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2173] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.2225] Config: added 'psk' value '<hidden>'
Aug 25 19:05:38 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board database logger.
Aug 25 19:05:38 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.5383] device (wlan1): supplicant interface state: inactive -> scanning
Aug 25 19:05:38 IQ138000 NetworkManager[412]: <info>  [1724612738.5386] device (p2p-dev-wlan1): supplicant management interface state: inactive -> scanning
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Aug 25 19:05:38 IQ138000 wb-mqtt-db[2863]: MQTT broker localhost:1883
Aug 25 19:05:38 IQ138000 wb-mqtt-db[2863]: Config file /etc/wb-mqtt-db.conf
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Aug 25 19:05:38 IQ138000 ntpd[2497]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Aug 25 19:05:38 IQ138000 systemd[1]: Started metrics sender.
Aug 25 19:05:38 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:38 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:38 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Aug 25 19:05:38 IQ138000 wb-mqtt-logs[2885]: MQTT broker localhost:1883
Aug 25 19:05:38 IQ138000 wb-mqtt-knx[2880]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:38 IQ138000 wb-mqtt-knx[2880]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:38 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Aug 25 19:05:38 IQ138000 wb-mqtt-logs[2885]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:38 IQ138000 wb-mqtt-logs[2885]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:38 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Aug 25 19:05:39 IQ138000 wb-mqtt-db[2863]: INFO: [sqlite] Creating tables if necessary
Aug 25 19:05:39 IQ138000 wb-mqtt-db[2863]: INFO: [sqlite] Create indices if necessary
Aug 25 19:05:39 IQ138000 wb-mqtt-db[2863]: INFO: [sqlite] Analyzing data table
Aug 25 19:05:39 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Aug 25 19:05:39 IQ138000 systemd[1]: Started "IQ network manager".
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 5)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 6)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 7)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 8)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 9)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: INFO: [mqtt] subscription succeeded (message id 10)
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Aug 25 19:05:39 IQ138000 wb-mqtt-iec104[2873]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 5)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 6)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 7)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 8)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 9)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: INFO: [mqtt] subscription succeeded (message id 10)
Aug 25 19:05:39 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Aug 25 19:05:39 IQ138000 ntpd[2497]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Aug 25 19:05:39 IQ138000 wb-mqtt-opcua[2927]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Aug 25 19:05:40 IQ138000 wb-mqtt-iec104[3001]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Aug 25 19:05:40 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Aug 25 19:05:40 IQ138000 wb-mqtt-confed[2857]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Aug 25 19:05:40 IQ138000 wb-mqtt-confed[2857]: INFO: [wbgo_mqtt] confed-IQ138000-2857: MQTT connection established
Aug 25 19:05:40 IQ138000 wb-mqtt-opcua[3041]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Aug 25 19:05:40 IQ138000 wb-mqtt-mbgate[2895]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Aug 25 19:05:40 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Aug 25 19:05:40 IQ138000 wb-mqtt-iec104[3001]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Aug 25 19:05:40 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Aug 25 19:05:41 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Aug 25 19:05:41 IQ138000 wb-mqtt-opcua[3041]: ERROR: [main] All groups are disabled, stopping service gracefully
Aug 25 19:05:41 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Aug 25 19:05:41 IQ138000 systemd[1]: Starting USB Debug Network...
Aug 25 19:05:41 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 15)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 22)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 29)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 36)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: ERROR: [gpio chip] Unable to open device path 'disconnected_gpiochip_1'. Will treat all lines on it as disconnected
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: ERROR: [gpio chip driver] Add GPIO line disconnected:4 (V_OUT) as initially disconnected
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 67)
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: WARNING: [gpio line] GPIO line disconnected:4 (V_OUT) has error r; Will not set value 1
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [gpio driver] Started
Aug 25 19:05:41 IQ138000 wb-mqtt-gpio[2799]: INFO: [mqtt] subscription succeeded (message id 74)
Aug 25 19:05:41 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:41 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Aug 25 19:05:41 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Aug 25 19:05:42 IQ138000 wb-mqtt-logs[2885]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:42 IQ138000 wb-mqtt-logs[2885]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:42 IQ138000 wpa_supplicant[383]: wlan0: Reject scan trigger since one is already pending
Aug 25 19:05:42 IQ138000 wb-mqtt-logs[2885]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:42 IQ138000 wb-mqtt-logs[2885]: INFO: [mqtt] subscription succeeded (message id 3)
Aug 25 19:05:42 IQ138000 wb-mqtt-knx[2880]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:42 IQ138000 wb-mqtt-knx[2880]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:42 IQ138000 wb-mqtt-knx[2880]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:42 IQ138000 wb-mqtt-knx[2880]: INFO: [mqtt] subscription succeeded (message id 15)
Aug 25 19:05:42 IQ138000 wb-mqtt-knx[2880]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Aug 25 19:05:43 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Aug 25 19:05:43 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Aug 25 19:05:43 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Aug 25 19:05:43 IQ138000 python3[2822]: No data file found at /tmp/network_status_cache.json
Aug 25 19:05:43 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Aug 25 19:05:43 IQ138000 python3[2822]: Connecting to MQTT
Aug 25 19:05:43 IQ138000 python3[2822]: Connected to MQTT
Aug 25 19:05:44 IQ138000 python3[2822]: Connection returned result: Connection Accepted.
Aug 25 19:05:44 IQ138000 kernel: vcc-gmac-phy: disabling
Aug 25 19:05:44 IQ138000 kernel: dc5ldo: disabling
Aug 25 19:05:44 IQ138000 kernel: dldo4: disabling
Aug 25 19:05:44 IQ138000 kernel: vdd-sd-power: disabling
Aug 25 19:05:44 IQ138000 kernel: vcc-sd: disabling
Aug 25 19:05:46 IQ138000 wb-device-manager[2844]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Aug 25 19:05:46 IQ138000 wb-device-manager[2844]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Aug 25 19:05:46 IQ138000 dbus-daemon[297]: [system] Connection :1.17 (uid=0 pid=2922 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Aug 25 19:05:46 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New virtual device lo 43b9e78a-c042-4779-a051-58ef319776ed /org/freedesktop/NetworkManager/Settings/7
Aug 25 19:05:47 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Aug 25 19:05:47 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:New active connection lo 43b9e78a-c042-4779-a051-58ef319776ed /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Aug 25 19:05:47 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:47 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:47 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:47 IQ138000 systemd[1]: Stopped KNX Daemon.
Aug 25 19:05:47 IQ138000 systemd[1]: Starting KNX Daemon...
Aug 25 19:05:48 IQ138000 knxd[4029]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Aug 25 19:05:48 IQ138000 knxd[4029]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Aug 25 19:05:48 IQ138000 systemd[1]: Started KNX Daemon.
Aug 25 19:05:48 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:05:48 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Aug 25 19:05:48 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: MQTT broker localhost:1883
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Creating driver MQTT controls
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device0/in_voltage0_scale = 0.732422
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] ADC worker thread is started
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] subscription succeeded (message id 63)
Aug 25 19:05:48 IQ138000 wb-mqtt-adc[4061]: INFO: [mqtt] subscription succeeded (message id 64)
Aug 25 19:05:49 IQ138000 NetworkManager[412]: <info>  [1724612749.1668] device (wlan1): supplicant interface state: scanning -> inactive
Aug 25 19:05:49 IQ138000 NetworkManager[412]: <info>  [1724612749.1671] device (p2p-dev-wlan1): supplicant management interface state: scanning -> inactive
Aug 25 19:05:49 IQ138000 wb-mqtt-confed[2857]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Aug 25 19:05:50 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Aug 25 19:05:50 IQ138000 wb-mqtt-db[2863]: INFO: [sqlite] DB initialization is done
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Aug 25 19:05:50 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Aug 25 19:05:51 IQ138000 wb-gsm[4457]: main: Called from pid 1 (systemd)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Aug 25 19:05:51 IQ138000 wb-gsm[4522]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Aug 25 19:05:51 IQ138000 wb-usb-otg-start.sh[4571]: : wb-usb-otg-start
Aug 25 19:05:51 IQ138000 wb-usb-otg-start.sh[4571]: main: setup_device()
Aug 25 19:05:51 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 4)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 19)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 26)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 33)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 46)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 59)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 72)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 85)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 98)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 111)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 124)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 137)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 150)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 163)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 170)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 177)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 184)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 191)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 198)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 205)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 212)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 219)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 226)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 233)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 240)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 247)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 254)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 261)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 268)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 275)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 282)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 289)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 296)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 303)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 310)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 317)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 324)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 331)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 338)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 345)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 352)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 359)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 366)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 373)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 380)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 387)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 394)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 401)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 408)
Aug 25 19:05:51 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Aug 25 19:05:51 IQ138000 kernel: LUN: removable file: (no medium)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 415)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 422)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 429)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 436)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 443)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 450)
Aug 25 19:05:51 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 457)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 470)
Aug 25 19:05:52 IQ138000 kernel: using random self ethernet address
Aug 25 19:05:52 IQ138000 kernel: using random host ethernet address
Aug 25 19:05:52 IQ138000 wb-gsm[4608]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Aug 25 19:05:52 IQ138000 wb-usb-otg-start.sh[4571]: main: enabling profile rndis
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 471)
Aug 25 19:05:52 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Aug 25 19:05:52 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Aug 25 19:05:52 IQ138000 systemd-udevd[4575]: Using default interface naming scheme 'v247'.
Aug 25 19:05:52 IQ138000 NetworkManager[412]: <info>  [1724612752.1658] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Aug 25 19:05:52 IQ138000 systemd[1]: Finished USB Debug Network.
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 485)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 492)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 499)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 512)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 525)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 538)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 551)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 564)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 577)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 590)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 603)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 616)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 629)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 636)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 643)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 650)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 657)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 664)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 671)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 678)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 685)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 692)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 699)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 706)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 713)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 720)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 727)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 734)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 741)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 748)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 755)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 762)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 769)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 776)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 783)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 790)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 797)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 804)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 811)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 818)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 825)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 832)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 839)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 846)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 853)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 860)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 867)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 874)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 881)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 888)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 895)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 902)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 909)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 916)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 923)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 936)
Aug 25 19:05:52 IQ138000 NetworkManager[412]: <info>  [1724612752.3600] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 937)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 951)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 958)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 965)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 978)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 991)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1004)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1017)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1030)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1043)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1056)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1069)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1082)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1095)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1102)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1109)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1116)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1123)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1130)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1137)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1144)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1151)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1158)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1165)
Aug 25 19:05:52 IQ138000 wb-gsm[4677]: should_enable: Should enable GSM modem
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1172)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1179)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1186)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1193)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1200)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1207)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1214)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1221)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1228)
Aug 25 19:05:52 IQ138000 systemd[1]: Started Power on GSM modem.
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1235)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1242)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1249)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1256)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1263)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1270)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1277)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1284)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1291)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1298)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1305)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1312)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1319)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1326)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1333)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1340)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1347)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1354)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1361)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1368)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1375)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1382)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1389)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1402)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1403)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1429)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1430)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1456)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1457)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1471)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1478)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1485)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1498)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1511)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1524)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1537)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1550)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1563)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1576)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1589)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1602)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1615)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1622)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1629)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1636)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1643)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1650)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1657)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1664)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1671)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1678)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1685)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1692)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1699)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1706)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1713)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1720)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1727)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1734)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1741)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1748)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1755)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1762)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1769)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1776)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1783)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1790)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1797)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1804)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1811)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1818)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1825)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1832)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1839)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1846)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1853)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1860)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1867)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1874)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1881)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1888)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1895)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1902)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1909)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1922)
Aug 25 19:05:52 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1923)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1937)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1944)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1951)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1964)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1977)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 1990)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2003)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2016)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2029)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2042)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2055)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2068)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2081)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2088)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2095)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2102)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2109)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2116)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2123)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2130)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2137)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2144)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2151)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2158)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2165)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2172)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2179)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2186)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2193)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2200)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2207)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2214)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2221)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2228)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2235)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2242)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2249)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2256)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2263)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2270)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2277)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2284)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2291)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2298)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2305)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2312)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2319)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2326)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2333)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2340)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2347)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2354)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2361)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2368)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2375)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2388)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2389)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2415)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2416)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2442)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2443)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2457)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2464)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2471)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2484)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2497)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2510)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2523)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2536)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2549)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2562)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2575)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2588)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2601)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2608)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2615)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2622)
Aug 25 19:05:53 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:53 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:53 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2629)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2636)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2643)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2650)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2657)
Aug 25 19:05:53 IQ138000 systemd[1]: Stopped Device Configuration Service.
Aug 25 19:05:53 IQ138000 systemd[1]: Starting Device Configuration Service...
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2664)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2671)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2678)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2685)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2692)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2699)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2706)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2713)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2720)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2727)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2734)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2741)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2748)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2755)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2762)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2769)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2776)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2783)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2790)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2797)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2804)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2811)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2818)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2825)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2832)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2839)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2846)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2853)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2860)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2867)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2874)
Aug 25 19:05:53 IQ138000 systemd[1]: Stopped User command preprocessor.
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2881)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2888)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2895)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2908)
Aug 25 19:05:53 IQ138000 wb-gsm[4766]: main: Called from pid 4681 (wb-gsm-mm)
Aug 25 19:05:53 IQ138000 systemd[1]: Starting User command preprocessor...
Aug 25 19:05:53 IQ138000 systemd[1]: Stopped User command handler service.
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 2909)
Aug 25 19:05:53 IQ138000 systemd[1]: Starting User command handler service...
Aug 25 19:05:53 IQ138000 systemd[1]: Started Device Configuration Service.
Aug 25 19:05:53 IQ138000 systemd[1]: Started User command preprocessor.
Aug 25 19:05:53 IQ138000 systemd[1]: Started User command handler service.
Aug 25 19:05:53 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:05:53 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Aug 25 19:05:53 IQ138000 systemd[1]: Starting Zigbee available emulator...
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3007)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3014)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3021)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3028)
Aug 25 19:05:53 IQ138000 systemd[1]: Started Zigbee available emulator.
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3035)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3042)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3049)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3050)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: DB logger started, go to main loop
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3148)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3155)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3162)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3169)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3176)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3183)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3190)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 5)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 6)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 7)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 8)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 9)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 10)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 11)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 12)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 13)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 14)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 15)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 16)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 17)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 18)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 19)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 20)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 21)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 22)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 23)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 24)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 25)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 26)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 27)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 28)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 29)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 30)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 31)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 32)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 33)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 34)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 35)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 36)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 37)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 38)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 39)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 40)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 41)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 42)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 43)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 44)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 45)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 46)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 47)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 48)
Aug 25 19:05:53 IQ138000 wb-gsm[4801]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3191)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 49)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 50)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 51)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 52)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 53)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 54)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 55)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 56)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 57)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 58)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 59)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 60)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 61)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 62)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 63)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 64)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 65)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 66)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 67)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 68)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 69)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 70)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 71)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 72)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 73)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 74)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 75)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 76)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 77)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 78)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 79)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 80)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 81)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 82)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 83)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 84)
Aug 25 19:05:53 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 85)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3289)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3296)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3303)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3310)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3317)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3324)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3331)
Aug 25 19:05:53 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3332)
Aug 25 19:05:54 IQ138000 python3[2822]: Выполнение: service wb-connection-manager stop
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 86)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 87)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 88)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 89)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 90)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 91)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 92)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 93)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 94)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 95)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 96)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 97)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 98)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 99)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 100)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 101)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 102)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 103)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 104)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 105)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 106)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 107)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 108)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 109)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 110)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 111)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 112)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 113)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 114)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 115)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 116)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 117)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 118)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 119)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 120)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 121)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 122)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 123)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 124)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 125)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 126)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 127)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 128)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 129)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 130)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 131)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 132)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 133)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 134)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 135)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 136)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 137)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 138)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 139)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 140)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 141)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 142)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 143)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 144)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 145)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 146)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 147)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 148)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 149)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 150)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 151)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 152)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 153)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 154)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 155)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 156)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 157)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 158)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 159)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 160)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 161)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 162)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 163)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 164)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 165)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 166)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 167)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 168)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 169)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 170)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 171)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 172)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 173)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 174)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 175)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 176)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 177)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 178)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 179)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 180)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 181)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 182)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 183)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 184)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 185)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 186)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 187)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 188)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 189)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 190)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 191)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 192)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 193)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3454)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3462)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3470)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3477)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3485)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3493)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3500)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3508)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3516)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3523)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3531)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3539)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3546)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3547)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 194)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 195)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 196)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 197)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 198)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 199)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 200)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 201)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 202)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 203)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 204)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 205)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 206)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 207)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 208)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 209)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 210)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 211)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 212)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 213)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 214)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 215)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 216)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 217)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 218)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 219)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 220)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 221)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 222)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 223)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 224)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 225)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 226)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 227)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 228)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 229)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 230)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 231)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 232)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 233)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 234)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 235)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 236)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 237)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 238)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 239)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 240)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 241)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 242)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 243)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 244)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 245)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 246)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 247)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 248)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 249)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 250)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 251)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 252)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 253)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 254)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 255)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 256)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 257)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 258)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 259)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 260)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 261)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 262)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 263)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 264)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 265)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 266)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 267)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 268)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 269)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 270)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 271)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 272)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 273)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 274)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 275)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 276)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 277)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 278)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 279)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 280)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 281)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 282)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 283)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 284)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 285)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 286)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 287)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 288)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 289)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 290)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 291)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 292)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 293)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 294)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 295)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 296)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 297)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 298)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 299)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 300)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 301)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3765)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3766)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 3767)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 302)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 303)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 304)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 305)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 306)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 307)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 308)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 309)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 310)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 311)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 312)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 313)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 314)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 315)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 316)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 317)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 318)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 319)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 320)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 321)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 322)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 323)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 324)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 325)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 326)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 327)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 328)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 329)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 330)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 331)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 332)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 333)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 334)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 335)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 336)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 337)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 338)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 339)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 340)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 341)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 342)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 343)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 344)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 345)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 346)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 347)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 348)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 349)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 350)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 351)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 352)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 353)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 354)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 355)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 356)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 357)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 358)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 359)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 360)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 361)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 362)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 363)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 364)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 365)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 366)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 367)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 368)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 369)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 370)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 371)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 372)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 373)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 374)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 375)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 376)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 377)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 378)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 379)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 380)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 381)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 382)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 383)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 384)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 385)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 386)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 387)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 388)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 389)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 390)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 391)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 392)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 393)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 394)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 395)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 396)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 397)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 398)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 399)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 400)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 401)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 402)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 403)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 404)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 405)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 406)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 407)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 408)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 409)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 410)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 411)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 412)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 413)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 414)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 415)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 416)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 417)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 418)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 419)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 420)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 421)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 422)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 423)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 424)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 425)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 426)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 427)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 428)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 429)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 430)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 431)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 432)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 433)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 434)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 435)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 436)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 437)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 438)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 439)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 440)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 441)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 442)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 443)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 444)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 445)
Aug 25 19:05:54 IQ138000 wb-gsm[4858]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 446)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 447)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 448)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 449)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 450)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 451)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 452)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 453)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 454)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 455)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 458)
Aug 25 19:05:54 IQ138000 wb-mqtt-db[2863]: INFO: [mqtt] subscription succeeded (message id 460)
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 5930)
Aug 25 19:05:54 IQ138000 npm[2542]: > zigbee2mqtt@2.1.1 start
Aug 25 19:05:54 IQ138000 npm[2542]: > node index.js
Aug 25 19:05:54 IQ138000 ModemManager[504]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.2.auto': not supported by any plugin
Aug 25 19:05:54 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 5931)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 5993)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6000)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6007)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6014)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6015)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6019)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6021)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: INFO: [mqtt] subscription succeeded (message id 6023)
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Aug 25 19:05:55 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Aug 25 19:05:56 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Aug 25 19:05:57 IQ138000 npm[4910]: Starting Zigbee2MQTT without watchdog.
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Aug 25 19:05:57 IQ138000 NetworkManager[412]: <info>  [1724612757.9110] device (wlan1): supplicant interface state: inactive -> scanning
Aug 25 19:05:57 IQ138000 NetworkManager[412]: <info>  [1724612757.9113] device (p2p-dev-wlan1): supplicant management interface state: inactive -> scanning
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Aug 25 19:05:57 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Aug 25 19:05:58 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Aug 25 19:05:58 IQ138000 wb-gsm[5480]: mm_off: Modem is already OFF
Aug 25 19:05:59 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:05:59 IQ138000 wb-gsm[5571]: main: Called from pid 4681 (wb-gsm-mm)
Aug 25 19:05:59 IQ138000 wb-gsm[5593]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Aug 25 19:05:59 IQ138000 wb-gsm[5633]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Aug 25 19:06:00 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Aug 25 19:06:00 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Aug 25 19:06:00 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:06:00 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Aug 25 19:06:02 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Aug 25 19:06:02 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Aug 25 19:06:02 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Aug 25 19:06:02 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Aug 25 19:06:03 IQ138000 systemd[1]: Stopped KNX Daemon.
Aug 25 19:06:03 IQ138000 systemd[1]: Starting KNX Daemon...
Aug 25 19:06:03 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Aug 25 19:06:03 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Aug 25 19:06:03 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Aug 25 19:06:03 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Aug 25 19:06:03 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Aug 25 19:06:03 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Aug 25 19:06:03 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.163s CPU time.
Aug 25 19:06:03 IQ138000 python3[2822]: Команда "service wb-connection-manager stop" выполнена. Результат:
Aug 25 19:06:03 IQ138000 python3[2822]:  
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: MQTT broker localhost:1883
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] UNIX socket exists, using it for connection
Aug 25 19:06:03 IQ138000 knxd[6045]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Aug 25 19:06:03 IQ138000 knxd[6045]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: w1 thread Started
Aug 25 19:06:03 IQ138000 systemd[1]: Started KNX Daemon.
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <warn>  [1724612763.1771] device (wlan1): Activation: (wifi) association took too long, failing activation
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <info>  [1724612763.1773] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <info>  [1724612763.1811] manager: NetworkManager state is now DISCONNECTED
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <warn>  [1724612763.1847] device (wlan1): Activation: failed for connection 'ServiceAP'
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <info>  [1724612763.1961] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] subscription succeeded (message id 9)
Aug 25 19:06:03 IQ138000 wb-mqtt-w1[6048]: INFO: [mqtt] subscription succeeded (message id 10)
Aug 25 19:06:03 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:06:03 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Aug 25 19:06:03 IQ138000 wb-mqtt-nm-helper[2922]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <info>  [1724612763.2511] device (wlan1): supplicant interface state: scanning -> disconnected
Aug 25 19:06:03 IQ138000 NetworkManager[412]: <info>  [1724612763.2513] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Aug 25 19:06:03 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Aug 25 19:06:03 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Aug 25 19:06:04 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:04 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Aug 25 19:06:04 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Aug 25 19:06:04 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Aug 25 19:06:04 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Aug 25 19:06:05 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:06 IQ138000 NetworkManager[412]: <info>  [1724612766.8319] manager: startup complete
Aug 25 19:06:06 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Aug 25 19:06:06 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Aug 25 19:06:06 IQ138000 systemd[1]: Reached target Network is Online.
Aug 25 19:06:06 IQ138000 systemd[1]: Stopped Health monitor service.
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:06 IQ138000 systemd[1]: Starting Health monitor service...
Aug 25 19:06:06 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Aug 25 19:06:06 IQ138000 systemd[1]: Stopping User command handler service...
Aug 25 19:06:06 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:06 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Aug 25 19:06:06 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Aug 25 19:06:06 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Aug 25 19:06:06 IQ138000 systemd[1]: Stopped User command handler service.
Aug 25 19:06:06 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Aug 25 19:06:06 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Aug 25 19:06:06 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Aug 25 19:06:06 IQ138000 systemd[1]: Started Health monitor service.
Aug 25 19:06:07 IQ138000 systemd[1]: Starting Data collection and transformation service...
Aug 25 19:06:07 IQ138000 systemd[1]: Starting User command handler service...
Aug 25 19:06:07 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Aug 25 19:06:07 IQ138000 systemd[1]: Starting Zigbee available emulator...
Aug 25 19:06:07 IQ138000 systemd[1]: Started Data collection and transformation service.
Aug 25 19:06:07 IQ138000 systemd[1]: Started User command handler service.
Aug 25 19:06:07 IQ138000 systemd[1]: Started Zigbee available emulator.
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 wb-rules[6532]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Aug 25 19:06:07 IQ138000 wb-rules[6532]: INFO: driver is created
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 wb-rules[6532]: INFO: driver loop is started
Aug 25 19:06:07 IQ138000 wb-rules[6532]: INFO: wait for driver to become ready
Aug 25 19:06:07 IQ138000 wb-rules[6532]: INFO: [wbgo_mqtt] rules-IQ138000-6532: MQTT connection established
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Aug 25 19:06:07 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 python3[2822]: Выполнение: mmcli -m wbc
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Aug 25 19:06:08 IQ138000 systemd[1]: Reached target Multi-User System.
Aug 25 19:06:08 IQ138000 systemd[1]: Starting watchdog daemon...
Aug 25 19:06:08 IQ138000 watchdog[6682]: starting daemon (5.16):
Aug 25 19:06:08 IQ138000 watchdog[6682]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Aug 25 19:06:08 IQ138000 watchdog[6682]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Aug 25 19:06:08 IQ138000 watchdog[6682]:  ping: no machine to check
Aug 25 19:06:08 IQ138000 watchdog[6682]:  file: no file to check
Aug 25 19:06:08 IQ138000 watchdog[6682]:  pidfile: /var/run/sshd.pid
Aug 25 19:06:08 IQ138000 watchdog[6682]:  interface: no interface to check
Aug 25 19:06:08 IQ138000 watchdog[6682]:  temperature: no sensors to check
Aug 25 19:06:08 IQ138000 watchdog[6682]:  no test binary files
Aug 25 19:06:08 IQ138000 watchdog[6682]:  no repair binary files
Aug 25 19:06:08 IQ138000 watchdog[6682]:  error retry time-out = 30 seconds
Aug 25 19:06:08 IQ138000 watchdog[6682]:  repair attempts = 1
Aug 25 19:06:08 IQ138000 watchdog[6682]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Aug 25 19:06:08 IQ138000 watchdog[6682]: cannot open /dev/watchdog1 (errno = 2 = 'No such file or directory')
Aug 25 19:06:08 IQ138000 systemd[1]: Started watchdog daemon.
Aug 25 19:06:08 IQ138000 systemd[1]: Reached target Graphical Interface.
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Aug 25 19:06:08 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Aug 25 19:06:08 IQ138000 systemd[1]: Startup finished in 3.797s (kernel) + 53.627s (userspace) = 57.425s.
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:08 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Aug 25 19:06:09 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Aug 25 19:06:09 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Aug 25 19:06:09 IQ138000 wb-rules[6532]: INFO: driver is ready
Aug 25 19:06:09 IQ138000 wb-rules[6532]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Aug 25 19:06:09 IQ138000 wb-rules[6532]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-6532: MQTT connection established
Aug 25 19:06:10 IQ138000 wb-rules[6532]: INFO: [engine] Starting main loop
Aug 25 19:06:10 IQ138000 wb-rules[6532]: INFO: the engine is ready
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Aug 25 19:06:10 IQ138000 wb-rules[6532]: INFO: [engine] Starting sync loop
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Aug 25 19:06:10 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:10 IQ138000 wpa_supplicant[383]: wlan1: Reject scan trigger since one is already pending
Aug 25 19:06:10 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:11 IQ138000 wb-rules[6532]: WARNING: [rule warning] DAC: no config file
Aug 25 19:06:11 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:11 IQ138000 wb-rules[6532]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Aug 25 19:06:11 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:11 IQ138000 wb-rules[6532]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Aug 25 19:06:11 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:11 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 13318 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Aug 25 19:06:12 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Aug 25 19:06:12 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Aug 25 19:06:12 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Aug 25 19:06:13 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:13 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Aug 25 19:06:13 IQ138000 wb-rules[6532]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Aug 25 19:06:13 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Aug 25 19:06:13 IQ138000 systemd[1]: Stopped KNX Daemon.
Aug 25 19:06:13 IQ138000 systemd[1]: Starting KNX Daemon...
Aug 25 19:06:13 IQ138000 wb-rules[6532]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Aug 25 19:06:13 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:13 IQ138000 knxd[7191]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Aug 25 19:06:13 IQ138000 systemd[1]: Started KNX Daemon.
Aug 25 19:06:13 IQ138000 knxd[7191]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Aug 25 19:06:13 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Aug 25 19:06:13 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Aug 25 19:06:13 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Aug 25 19:06:13 IQ138000 wb-rules[6532]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Aug 25 19:06:13 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Aug 25 19:06:13 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Aug 25 19:06:13 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Aug 25 19:06:13 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:13 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Aug 25 19:06:13 IQ138000 NetworkManager[412]: <info>  [1724612773.8844] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Aug 25 19:06:13 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 9a:e2:76:d9:ba:5a
Aug 25 19:06:13 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Aug 25 19:06:13 IQ138000 kernel: usbcore: registered new interface driver option
Aug 25 19:06:13 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Aug 25 19:06:13 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Aug 25 19:06:13 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Aug 25 19:06:13 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Aug 25 19:06:13 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Aug 25 19:06:13 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Aug 25 19:06:13 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Aug 25 19:06:14 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Aug 25 19:06:14 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Aug 25 19:06:14 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Aug 25 19:06:14 IQ138000 python3[2822]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Aug 25 19:06:14 IQ138000 systemd-udevd[7220]: Using default interface naming scheme 'v247'.
Aug 25 19:06:14 IQ138000 systemd-udevd[7220]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 25 19:06:14 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:14 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:14 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:14 IQ138000 wb-rules[6532]: INFO: all rule files are loaded
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:06:15 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Aug 25 19:06:15 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Aug 25 19:06:16 IQ138000 python3[2822]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Aug 25 19:06:16 IQ138000 wb-gsm[7473]: mm_on: Waiting for modem to start
Aug 25 19:06:16 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Aug 25 19:06:17 IQ138000 wb-mqtt-serial[2510]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
-- Boot a70cf81e0daa4bba91a401f0e560fb69 --
Oct 11 00:42:36 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 00:42:36 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 00:42:36 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 00:42:36 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 00:42:36 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 00:42:36 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 00:42:36 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 00:42:36 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 00:42:36 IQ138000 kernel: Zone ranges:
Oct 11 00:42:36 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 00:42:36 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 00:42:36 IQ138000 kernel: Movable zone start for each node
Oct 11 00:42:36 IQ138000 kernel: Early memory node ranges
Oct 11 00:42:36 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 00:42:36 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 00:42:36 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 00:42:36 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 00:42:36 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 00:42:36 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 00:42:36 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 00:42:36 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 00:42:36 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 00:42:36 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 00:42:36 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 00:42:36 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 00:42:36 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 00:42:36 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 00:42:36 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 00:42:36 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 00:42:36 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 00:42:36 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 00:42:36 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 00:42:36 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 00:42:36 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 00:42:36 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 00:42:36 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 00:42:36 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 00:42:36 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 00:42:36 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 00:42:36 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 00:42:36 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 00:42:36 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 00:42:36 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 00:42:36 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 00:42:36 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 00:42:36 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 00:42:36 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 00:42:36 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 00:42:36 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 00:42:36 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 00:42:36 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 00:42:36 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 00:42:36 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 00:42:36 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 00:42:36 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 00:42:36 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 00:42:36 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 00:42:36 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 00:42:36 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 00:42:36 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 00:42:36 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 00:42:36 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 00:42:36 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 00:42:36 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 00:42:36 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 00:42:36 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 00:42:36 IQ138000 kernel: devtmpfs: initialized
Oct 11 00:42:36 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 00:42:36 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 00:42:36 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 00:42:36 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 00:42:36 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 00:42:36 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 00:42:36 IQ138000 kernel: No ATAGs?
Oct 11 00:42:36 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 00:42:36 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 00:42:36 IQ138000 kernel: SCSI subsystem initialized
Oct 11 00:42:36 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 00:42:36 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 00:42:36 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 00:42:36 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 00:42:36 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 00:42:36 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 00:42:36 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 00:42:36 IQ138000 kernel: PTP clock support registered
Oct 11 00:42:36 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 00:42:36 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 00:42:36 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 00:42:36 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 00:42:36 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 00:42:36 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 00:42:36 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 00:42:36 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 00:42:36 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 00:42:36 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 00:42:36 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 00:42:36 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 00:42:36 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 00:42:36 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 00:42:36 IQ138000 kernel: Key type id_resolver registered
Oct 11 00:42:36 IQ138000 kernel: Key type id_legacy registered
Oct 11 00:42:36 IQ138000 kernel: Key type asymmetric registered
Oct 11 00:42:36 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 00:42:36 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 00:42:36 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 00:42:36 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 00:42:36 IQ138000 kernel: io scheduler kyber registered
Oct 11 00:42:36 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 00:42:36 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 00:42:36 IQ138000 kernel: brd: module loaded
Oct 11 00:42:36 IQ138000 kernel: loop: module loaded
Oct 11 00:42:36 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 00:42:36 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:42:36 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:42:36 IQ138000 kernel: CAN device driver interface
Oct 11 00:42:36 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 00:42:36 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 00:42:36 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 00:42:36 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 00:42:36 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 00:42:36 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 00:42:36 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 00:42:36 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 00:42:36 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 00:42:36 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 00:42:36 IQ138000 kernel: i2c /dev entries driver
Oct 11 00:42:36 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 00:42:36 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 00:42:36 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 00:42:36 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 00:42:36 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 00:42:36 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 00:42:36 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 00:42:36 IQ138000 kernel: Segment Routing with IPv6
Oct 11 00:42:36 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 00:42:36 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 00:42:36 IQ138000 kernel: can: controller area network core
Oct 11 00:42:36 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 00:42:36 IQ138000 kernel: can: raw protocol
Oct 11 00:42:36 IQ138000 kernel: can: broadcast manager protocol
Oct 11 00:42:36 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 00:42:36 IQ138000 kernel: can: SAE J1939
Oct 11 00:42:36 IQ138000 kernel: Key type dns_resolver registered
Oct 11 00:42:36 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 00:42:36 IQ138000 kernel: registered taskstats version 1
Oct 11 00:42:36 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 00:42:36 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 00:42:36 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 00:42:36 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:42:36 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 00:42:36 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 00:42:36 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 00:42:36 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 00:42:36 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T00:42:32 UTC (1760143352)
Oct 11 00:42:36 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 00:42:36 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:42:36 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 00:42:36 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 00:42:36 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 00:42:36 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 00:42:36 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 00:42:36 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 00:42:36 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 00:42:36 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 00:42:36 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 00:42:36 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 00:42:36 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 00:42:36 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 00:42:36 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: random: fast init done
Oct 11 00:42:36 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 00:42:36 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 00:42:36 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 00:42:36 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 00:42:36 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 00:42:36 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 00:42:36 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 00:42:36 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 00:42:36 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 00:42:36 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:42:36 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:42:36 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 00:42:36 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:42:36 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 00:42:36 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 00:42:36 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 00:42:36 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 00:42:36 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 00:42:36 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 00:42:36 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 00:42:36 IQ138000 kernel: libphy: stmmac: probed
Oct 11 00:42:36 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:42:36 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 00:42:36 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:42:36 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 00:42:36 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 00:42:36 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:42:36 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 00:42:36 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 00:42:36 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 00:42:36 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 00:42:36 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 00:42:36 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 00:42:36 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 00:42:36 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 00:42:36 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 00:42:36 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 00:42:36 IQ138000 kernel: of_cfs_init
Oct 11 00:42:36 IQ138000 kernel: of_cfs_init: OK
Oct 11 00:42:36 IQ138000 kernel: ALSA device list:
Oct 11 00:42:36 IQ138000 kernel:   No soundcards found.
Oct 11 00:42:36 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 00:42:36 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 00:42:36 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 00:42:36 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 00:42:36 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 00:42:36 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 00:42:36 IQ138000 kernel: devtmpfs: mounted
Oct 11 00:42:36 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 00:42:36 IQ138000 kernel: Run /sbin/init as init process
Oct 11 00:42:36 IQ138000 kernel:   with arguments:
Oct 11 00:42:36 IQ138000 kernel:     /sbin/init
Oct 11 00:42:36 IQ138000 kernel:   with environment:
Oct 11 00:42:36 IQ138000 kernel:     HOME=/
Oct 11 00:42:36 IQ138000 kernel:     TERM=linux
Oct 11 00:42:36 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 00:42:36 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 00:42:36 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 00:42:36 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 00:42:36 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 00:42:36 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:42:36 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 00:42:36 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:42:36 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 00:42:36 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:42:36 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 00:42:36 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 00:42:36 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 00:42:36 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 00:42:36 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 00:42:36 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 00:42:36 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 00:42:36 IQ138000 systemd[1]: Reached target Paths.
Oct 11 00:42:36 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 00:42:36 IQ138000 systemd[1]: Reached target Slices.
Oct 11 00:42:36 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 00:42:36 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 00:42:36 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 00:42:36 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 00:42:36 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 00:42:36 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 00:42:36 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 00:42:36 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 00:42:36 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 00:42:36 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 00:42:36 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 00:42:36 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 00:42:36 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 00:42:36 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 00:42:36 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 00:42:36 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 00:42:36 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 00:42:36 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 00:42:36 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 00:42:36 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 00:42:36 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 00:42:36 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 00:42:36 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 00:42:36 IQ138000 systemd-journald[139]: Journal started
Oct 11 00:42:36 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 00:42:36 IQ138000 systemd-fsck[142]: rootfs1: clean, 37039/131072 files, 278737/524288 blocks
Oct 11 00:42:36 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 00:42:36 IQ138000 systemd[1]: Started Journal Service.
Oct 11 00:42:36 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 00:42:36 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 00:42:36 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 00:42:36 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 00:42:36 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 00:42:36 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 00:42:36 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 00:42:36 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 00:42:36 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 00:42:37 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 00:42:37 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 00:42:37 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 00:42:37 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 00:42:37 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 00:42:37 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 00:42:37 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 00:42:37 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 00:42:37 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 00:42:37 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 00:42:37 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 00:42:37 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 00:42:37 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 00:42:37 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 00:42:37 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 00:42:37 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 00:42:37 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 00:42:38 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 00:42:38 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 00:42:38 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 00:42:38 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 00:42:38 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 00:42:38 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 00:42:38 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 00:42:38 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 00:42:38 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 00:42:38 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 00:42:38 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 00:42:38 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 00:42:38 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 00:42:38 IQ138000 systemd-udevd[159]: eth1: Failed to query device driver: Device or resource busy
Oct 11 00:42:38 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 00:42:38 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 00:42:38 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 00:42:38 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 00:42:38 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 00:42:38 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 00:42:38 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 00:42:38 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 00:42:39 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 00:42:39 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 00:42:39 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 00:42:39 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 00:42:39 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 00:42:39 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:42:39 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:42:39 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 00:42:39 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 00:42:39 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 00:42:39 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 00:42:39 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 00:42:39 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 00:42:39 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 00:42:39 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 00:42:39 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 00:42:39 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 00:42:39 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 00:42:39 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 00:42:39 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 00:42:39 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 00:42:39 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 00:42:39 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 00:42:39 IQ138000 systemd[1]: Reached target Swap.
Oct 11 00:42:39 IQ138000 systemd-fsck[213]: data: recovering journal
Oct 11 00:42:39 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 00:42:39 IQ138000 systemd-fsck[213]: data: Clearing orphaned inode 128344 (uid=0, gid=101, mode=0100640, size=8388608)
Oct 11 00:42:39 IQ138000 systemd-fsck[213]: data: clean, 16429/328656 files, 370337/1313536 blocks
Oct 11 00:42:39 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 00:42:39 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 00:42:39 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 00:42:39 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 00:42:39 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 00:42:39 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 00:42:39 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 00:42:39 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 00:42:40 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 00:42:40 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 48.267ms for 461 entries.
Oct 11 00:42:40 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 500.5M, max 496.6M, 0B free.
Oct 11 00:42:40 IQ138000 kernel: random: crng init done
Oct 11 00:42:40 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 00:42:40 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 00:42:40 IQ138000 wb-configs-early[219]: Checking symlinks to /mnt/data
Oct 11 00:42:40 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 00:42:40 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 00:42:40 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 00:42:40 IQ138000 wb-configs-early[219]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 00:42:40 IQ138000 wb-configs-early[219]: Setting ownership www-data to /mnt/data/uploads
Oct 11 00:42:40 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 00:42:40 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 00:42:41 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 00:42:41 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 00:42:41 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 00:42:41 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 00:42:41 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 00:42:41 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 00:42:41 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 00:42:41 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 00:42:41 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 00:42:41 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 00:42:41 IQ138000 systemd[1]: Reached target Timers.
Oct 11 00:42:41 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 00:42:41 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 00:42:41 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 00:42:41 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 00:42:41 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 00:42:41 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 00:42:41 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 00:42:41 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 00:42:41 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 00:42:41 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 00:42:41 IQ138000 cron[296]: (CRON) INFO (pidfile fd = 3)
Oct 11 00:42:41 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 00:42:41 IQ138000 cron[296]: (CRON) INFO (Running @reboot jobs)
Oct 11 00:42:41 IQ138000 bluetoothd[293]: Bluetooth daemon 5.55
Oct 11 00:42:41 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 00:42:41 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 00:42:41 IQ138000 bluetoothd[293]: Starting SDP server
Oct 11 00:42:41 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 00:42:41 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 00:42:41 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 00:42:41 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 00:42:41 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 00:42:41 IQ138000 bluetoothd[293]: Bluetooth management interface 1.18 initialized
Oct 11 00:42:41 IQ138000 dbus-daemon[297]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=293 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 00:42:41 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 00:42:41 IQ138000 bluetoothd[293]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 00:42:41 IQ138000 bluetoothd[293]: sap-server: Operation not permitted (1)
Oct 11 00:42:41 IQ138000 config-manager[294]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 00:42:41 IQ138000 config-manager[294]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 00:42:41 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 00:42:41 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 00:42:41 IQ138000 wb-watchdog[322]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 00:42:42 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:42:42 IQ138000 migrate.sh[323]: Error: No such file or directory
Oct 11 00:42:42 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 00:42:42 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 00:42:42 IQ138000 migrate.sh[336]: Error: No such file or directory
Oct 11 00:42:42 IQ138000 reverse-ssh.sh[341]: Error: No such file or directory
Oct 11 00:42:42 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:42:42 IQ138000 polkitd[325]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 00:42:42 IQ138000 systemd[1]: Started watch config files.
Oct 11 00:42:42 IQ138000 migrate.sh[351]: Error: No such file or directory
Oct 11 00:42:42 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 00:42:42 IQ138000 rules-preprocessor[337]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 00:42:42 IQ138000 rules-preprocessor[337]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 00:42:42 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 00:42:42 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 00:42:42 IQ138000 migrate.sh[359]: Error: No such file or directory
Oct 11 00:42:42 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 00:42:42 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Successfully dropped root privileges.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: avahi-daemon 0.8 starting up.
Oct 11 00:42:42 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 00:42:42 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 00:42:42 IQ138000 migrate.sh[368]: Error: No such file or directory
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Successfully called chroot().
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Successfully dropped remaining capabilities.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: No service file found in /etc/avahi/services.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv6 for mDNS.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv4 for mDNS.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Network interface enumeration completed.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Registering new address record for ::1 on lo.*.
Oct 11 00:42:42 IQ138000 avahi-daemon[365]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 00:42:42 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:42:42 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 00:42:42 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 00:42:42 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 00:42:42 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 00:42:42 IQ138000 wpa_supplicant[379]: Successfully initialized wpa_supplicant
Oct 11 00:42:42 IQ138000 systemd-logind[342]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 00:42:42 IQ138000 systemd-logind[342]: New seat seat0.
Oct 11 00:42:42 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 00:42:42 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 00:42:42 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:42 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 00:42:42 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 00:42:42 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 00:42:42 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:42 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 00:42:42 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 00:42:42 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 00:42:42 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 00:42:42 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 00:42:42 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:42 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 00:42:42 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 00:42:42 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 00:42:42 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 00:42:43 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:42:43 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 00:42:43 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.0916] NetworkManager (version 1.42.4) is starting... (boot:a70cf81e-0daa-4bba-91a4-01f0e560fb69)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.0920] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.1039] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 00:42:43 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 00:42:43 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.1504] manager[0x656900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 00:42:43 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 00:42:43 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 00:42:43 IQ138000 monit[321]: Starting daemon monitor: monit.
Oct 11 00:42:43 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 00:42:43 IQ138000 avahi-daemon[365]: Server startup complete. Host name is IQ138000.local. Local service cookie is 2047526727.
Oct 11 00:42:43 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 00:42:43 IQ138000 systemd[1]: Started User Login Management.
Oct 11 00:42:43 IQ138000 systemd[1]: Started Network Manager.
Oct 11 00:42:43 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 00:42:43 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 00:42:43 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 00:42:43 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 00:42:43 IQ138000 ModemManager[479]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 00:42:43 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 00:42:43 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.8878] hostname: hostname: using hostnamed
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.8881] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.8917] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.8993] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9012] manager[0x656900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9014] manager[0x656900]: rfkill: WWAN hardware radio set enabled
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9278] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9372] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9408] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9663] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9701] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9738] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9763] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9768] manager: Networking is enabled by state file
Oct 11 00:42:43 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9847] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9851] settings: Loaded settings plugin: keyfile (internal)
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9853] ifupdown: management mode: unmanaged
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9854] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 00:42:43 IQ138000 NetworkManager[404]: <info>  [1760143363.9857] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 00:42:44 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 00:42:44 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.0620] dhcp: init: Using DHCP client 'internal'
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.0672] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.1009] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.1127] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.1234] device (lo): Activation: starting connection 'lo' (744ec332-d34d-46f5-99d2-f5c52ab6f0ad)
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.1363] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 00:42:44 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.1413] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:42:44 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.5049] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.5073] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.5104] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.5134] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:42:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 00:42:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 00:42:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 00:42:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 00:42:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 00:42:44 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.7182] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.7226] device (wlan0): driver supports Access Point (AP) mode
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.7280] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 00:42:44 IQ138000 NetworkManager[404]: <info>  [1760143364.7306] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.5359] device (wlan1): driver supports Access Point (AP) mode
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.5405] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.5428] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.5957] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.5977] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.5993] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.6134] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.6604] modem-manager: ModemManager available
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.6619] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.6640] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.6687] device (lo): Activation: successful, device activated.
Oct 11 00:42:45 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9528] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9536] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9585] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9607] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9869] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9886] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9917] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 00:42:45 IQ138000 NetworkManager[404]: <info>  [1760143365.9964] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:42:46 IQ138000 NetworkManager[404]: <info>  [1760143366.0047] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 00:42:46 IQ138000 NetworkManager[404]: <info>  [1760143366.0099] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:46 IQ138000 NetworkManager[404]: <info>  [1760143366.0134] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 00:42:46 IQ138000 NetworkManager[404]: <info>  [1760143366.0222] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:46 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 00:42:46 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 00:42:46 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 00:42:49 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:42:49 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 00:42:49 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 00:42:49 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:49 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:42:49 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 00:42:50 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 00:42:50 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 00:42:50 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:50 IQ138000 init.sh[1320]: ...
Oct 11 00:42:50 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 00:42:50 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:50 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 00:42:50 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 00:42:50 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 00:42:50 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 00:42:50 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:50 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:42:50 IQ138000 init.sh[1320]: ...
Oct 11 00:42:50 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 00:42:50 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:51 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 00:42:51 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 00:42:51 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 00:42:51 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 00:42:51 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:51 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 00:42:51 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 00:42:51 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:42:51 IQ138000 init.sh[1320]: ...
Oct 11 00:42:51 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 00:42:51 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 00:42:52 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 00:42:52 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 00:42:52 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 00:42:52 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 00:42:52 IQ138000 systemd[1]: Reached target Network.
Oct 11 00:42:52 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 00:42:52 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 00:42:52 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:42:52 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 00:42:52 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 00:42:52 IQ138000 lsyncd[1610]: 00:42:52 Normal: --- Startup ---
Oct 11 00:42:52 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 00:42:52 IQ138000 lsyncd[1610]: 00:42:52 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 00:42:52 IQ138000 lsyncd[1610]: journal
Oct 11 00:42:52 IQ138000 lsyncd[1610]: messages
Oct 11 00:42:52 IQ138000 lsyncd[1610]: iq_network_manager/iq_network_manager.log
Oct 11 00:42:52 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:42:52 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:42:52 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 00:42:52 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 00:42:52 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 00:42:52 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 00:42:52 IQ138000 lsyncd[1626]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 00:42:52 IQ138000 lsyncd[1620]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 00:42:52 IQ138000 lsyncd[1620]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 00:42:52 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 00:42:52 IQ138000 lsyncd[1610]: 00:42:52 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 00:42:52 IQ138000 persist_meter_data.sh[1641]: Error: No such file or directory
Oct 11 00:42:52 IQ138000 ntpd[1619]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 00:42:52 IQ138000 ntpd[1619]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 00:42:52 IQ138000 ntpd[1619]: ----------------------------------------------------
Oct 11 00:42:52 IQ138000 ntpd[1619]: ntp-4 is maintained by Network Time Foundation,
Oct 11 00:42:52 IQ138000 ntpd[1619]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 00:42:52 IQ138000 ntpd[1619]: corporation.  Support and training for ntp-4 are
Oct 11 00:42:52 IQ138000 ntpd[1619]: available at https://www.nwtime.org/support
Oct 11 00:42:52 IQ138000 ntpd[1619]: ----------------------------------------------------
Oct 11 00:42:52 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 00:42:52 IQ138000 ntpd[1646]: proto: precision = 1.041 usec (-20)
Oct 11 00:42:52 IQ138000 ntpd[1646]: basedate set to 2020-09-11
Oct 11 00:42:52 IQ138000 ntpd[1646]: gps base set to 2020-09-13 (week 2123)
Oct 11 00:42:52 IQ138000 ntpd[1646]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 00:42:52 IQ138000 ntpd[1646]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 00:42:52 IQ138000 ntpd[1646]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 00:42:52 IQ138000 ntpd[1646]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 00:42:52 IQ138000 ntpd[1646]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 00:42:52 IQ138000 ntpd[1646]: Listen normally on 3 lo [::1]:123
Oct 11 00:42:52 IQ138000 ntpd[1646]: Listening on routing socket on fd #20 for interface updates
Oct 11 00:42:53 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 00:42:53 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 00:42:53 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 00:42:53 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 00:42:53 IQ138000 NetworkManager[404]: <info>  [1760143373.0780] manager: startup complete
Oct 11 00:42:53 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 00:42:53 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 00:42:53 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:42:53 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 00:42:53 IQ138000 wb-mqtt-w1[1684]: MQTT broker localhost:1883
Oct 11 00:42:53 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:53 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 00:42:53 IQ138000 wb-mqtt-w1[1684]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 00:42:53 IQ138000 wb-mqtt-w1[1684]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 00:42:53 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:42:53 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 00:42:53 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 00:42:53 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 00:42:53 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 00:42:53 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 00:42:53 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 00:42:53 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 00:42:53 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:53 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:42:53 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 00:42:53 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 00:42:53 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 00:42:53 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:53 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 00:42:53 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 00:42:53 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:42:53 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 00:42:53 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 00:42:53 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 00:42:53 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 00:42:53 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 00:42:53 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 00:42:53 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 00:42:53 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 00:42:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 00:42:53 IQ138000 ntpd[1646]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:42:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 00:42:53 IQ138000 sshd[1730]: Server listening on 0.0.0.0 port 22.
Oct 11 00:42:53 IQ138000 sshd[1730]: Server listening on :: port 22.
Oct 11 00:42:54 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 00:42:54 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 00:42:54 IQ138000 wb-connection-manager[1505]: Connection LegacyWiFi not found, skipping
Oct 11 00:42:54 IQ138000 vnstatd[1647]: Info: vnStat daemon 2.6 started. (pid:1647 uid:110 gid:117 64-bit)
Oct 11 00:42:54 IQ138000 vnstatd[1647]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 00:42:54 IQ138000 vnstatd[1647]: Info: Interface "ppp0" disabled.
Oct 11 00:42:54 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 00:42:54 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 00:42:54 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:42:54 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 00:42:54 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:54 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 00:42:54 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 00:42:54 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 00:42:54 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 00:42:54 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 00:42:54 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 00:42:54 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 00:42:54 IQ138000 wpa_supplicant[379]: wlan0: Reject scan trigger since one is already pending
Oct 11 00:42:54 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:42:54 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 00:42:54 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 00:42:54 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 00:42:54 IQ138000 reverse-ssh.sh[1871]: Error: No such file or directory
Oct 11 00:42:54 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:54 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 00:42:54 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 00:42:54 IQ138000 ntpd[1646]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <error> [1760143375.1104] audit: failed to open auditd socket: Protocol not supported
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.1107] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1505 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 00:42:55 IQ138000 wb-connection-manager[1505]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Warning: Error resolving bridge address: Name or service not known.
Oct 11 00:42:55 IQ138000 wb-adjust-systime[1882]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 00:42:55 IQ138000 mosquitto[1910]: 1760143375: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 00:42:55 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:42:55 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 00:42:55 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:42:55 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 00:42:55 IQ138000 wb-adjust-systime[1882]: Drift file is valid (was recently edited)
Oct 11 00:42:55 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 00:42:55 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 00:42:55 IQ138000 knxd[1956]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:42:55 IQ138000 knxd[1956]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:42:55 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.7850] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.7857] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1505 uid=0 result="success"
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.7864] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:55 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.7965] manager: NetworkManager state is now CONNECTING
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8198] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8221] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8223] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:55 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8787] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8811] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8831] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8836] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8838] Config: added 'scan_ssid' value '1'
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8839] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8841] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 00:42:55 IQ138000 NetworkManager[404]: <info>  [1760143375.8842] Config: added 'psk' value '<hidden>'
Oct 11 00:42:55 IQ138000 ntpd[1646]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:42:55 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 00:42:55 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 00:42:56 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 00:42:56 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 00:42:56 IQ138000 NetworkManager[404]: <info>  [1760143376.1767] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 00:42:56 IQ138000 NetworkManager[404]: <info>  [1760143376.1770] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: MQTT broker localhost:1883
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: Config file /etc/wb-mqtt-db.conf
Oct 11 00:42:56 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] Creating tables if necessary
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] Create indices if necessary
Oct 11 00:42:56 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] Analyzing data table
Oct 11 00:42:56 IQ138000 systemd[1]: Started metrics sender.
Oct 11 00:42:56 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 00:42:56 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 00:42:56 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 00:42:56 IQ138000 wb-mqtt-logs[2054]: MQTT broker localhost:1883
Oct 11 00:42:56 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:56 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:42:56 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:42:56 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 00:42:56 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.535s CPU time.
Oct 11 00:42:56 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:42:56 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:42:56 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 00:42:56 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 00:42:56 IQ138000 ntpd[1646]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:42:56 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 00:42:56 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 00:42:57 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 00:42:57 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 00:42:57 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio driver] Started
Oct 11 00:42:57 IQ138000 wb-mqtt-confed[2022]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 00:42:57 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 00:42:57 IQ138000 wb-mqtt-confed[2022]: INFO: [wbgo_mqtt] confed-IQ138000-2022: MQTT connection established
Oct 11 00:42:57 IQ138000 wb-mqtt-knx[2152]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:57 IQ138000 wb-mqtt-knx[2152]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:42:57 IQ138000 wb-mqtt-iec104[2041]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:42:57 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:42:57 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:42:57 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:42:57 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 00:42:57 IQ138000 wb-mqtt-opcua[2091]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 00:42:58 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 00:42:58 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 00:42:58 IQ138000 wb-mqtt-mbgate[2070]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 00:42:58 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 00:42:58 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 00:42:58 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 00:42:58 IQ138000 wb-mqtt-opcua[2261]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 00:42:58 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 00:42:58 IQ138000 wb-mqtt-iec104[2252]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 00:42:58 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:42:58 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 00:42:58 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 00:42:59 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 00:42:59 IQ138000 wb-mqtt-opcua[2261]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 00:42:59 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 00:42:59 IQ138000 wb-mqtt-knx[2152]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:42:59 IQ138000 wb-mqtt-knx[2152]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:42:59 IQ138000 wb-mqtt-knx[2152]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:42:59 IQ138000 wb-mqtt-knx[2152]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:42:59 IQ138000 wb-mqtt-knx[2152]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 00:42:59 IQ138000 wb-mqtt-iec104[2252]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 00:42:59 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 00:43:00 IQ138000 python3[2000]: No data file found at /tmp/network_status_cache.json
Oct 11 00:43:00 IQ138000 python3[2000]: Connecting to MQTT
Oct 11 00:43:00 IQ138000 python3[2000]: Connected to MQTT
Oct 11 00:43:00 IQ138000 python3[2000]: Connection returned result: Connection Accepted.
Oct 11 00:43:01 IQ138000 NetworkManager[404]: <info>  [1760143381.0971] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 00:43:01 IQ138000 NetworkManager[404]: <info>  [1760143381.0973] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 00:43:03 IQ138000 dbus-daemon[297]: [system] Connection :1.17 (uid=0 pid=2082 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 00:43:03 IQ138000 wb-device-manager[2011]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 00:43:03 IQ138000 wb-device-manager[2011]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New virtual device lo 744ec332-d34d-46f5-99d2-f5c52ab6f0ad /org/freedesktop/NetworkManager/Settings/7
Oct 11 00:43:03 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:43:03 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 00:43:03 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New active connection lo 744ec332-d34d-46f5-99d2-f5c52ab6f0ad /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 00:43:04 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 00:43:04 IQ138000 kernel: dc5ldo: disabling
Oct 11 00:43:04 IQ138000 kernel: dldo4: disabling
Oct 11 00:43:04 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 00:43:04 IQ138000 kernel: vcc-sd: disabling
Oct 11 00:43:05 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 00:43:05 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 00:43:05 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:43:05 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 00:43:05 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: MQTT broker localhost:1883
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] ADC worker thread is started
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 00:43:05 IQ138000 wb-mqtt-adc[3182]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 00:43:06 IQ138000 wb-mqtt-confed[2022]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 00:43:06 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 00:43:06 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:43:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:43:07 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 00:43:07 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 00:43:07 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 00:43:07 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 00:43:07 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] DB initialization is done
Oct 11 00:43:07 IQ138000 knxd[3359]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:43:07 IQ138000 knxd[3359]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:43:07 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:43:07 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:43:07 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:43:07 IQ138000 wb-gsm[3393]: main: Called from pid 1 (systemd)
Oct 11 00:43:07 IQ138000 wb-gsm[3432]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:43:07 IQ138000 wb-usb-otg-start.sh[3472]: : wb-usb-otg-start
Oct 11 00:43:07 IQ138000 wb-usb-otg-start.sh[3472]: main: setup_device()
Oct 11 00:43:07 IQ138000 wb-gsm[3503]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:43:07 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 00:43:08 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 00:43:08 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 00:43:08 IQ138000 kernel: using random self ethernet address
Oct 11 00:43:08 IQ138000 kernel: using random host ethernet address
Oct 11 00:43:08 IQ138000 wb-usb-otg-start.sh[3472]: main: enabling profile rndis
Oct 11 00:43:08 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 00:43:08 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 00:43:08 IQ138000 systemd-udevd[3491]: Using default interface naming scheme 'v247'.
Oct 11 00:43:08 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 00:43:08 IQ138000 NetworkManager[404]: <info>  [1760143388.2533] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 00:43:08 IQ138000 NetworkManager[404]: <info>  [1760143388.4053] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:43:08 IQ138000 wb-gsm[3553]: should_enable: Should enable GSM modem
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:43:08 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 484)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 491)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 498)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 511)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 524)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 537)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 550)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 563)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 576)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 950)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 957)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 964)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 977)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 990)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1003)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1016)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1029)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1042)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1055)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 00:43:08 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 00:43:09 IQ138000 wb-gsm[3629]: main: Called from pid 3559 (wb-gsm-mm)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 00:43:09 IQ138000 NetworkManager[404]: <info>  [1760143389.8040] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 00:43:09 IQ138000 NetworkManager[404]: <info>  [1760143389.8042] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 00:43:09 IQ138000 wb-gsm[3640]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:43:09 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 00:43:09 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 00:43:10 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 00:43:10 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 00:43:10 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 00:43:10 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 00:43:10 IQ138000 wb-gsm[3663]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: DB logger started, go to main loop
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 00:43:10 IQ138000 python3[2000]: Выполнение: service wb-connection-manager stop
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 00:43:10 IQ138000 npm[1692]: > zigbee2mqtt@2.1.1 start
Oct 11 00:43:10 IQ138000 npm[1692]: > node index.js
Oct 11 00:43:10 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 00:43:10 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 00:43:10 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 00:43:10 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 00:43:11 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 00:43:12 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-gsm[4050]: mm_off: Modem is already OFF
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 00:43:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 00:43:14 IQ138000 npm[3723]: Starting Zigbee2MQTT without watchdog.
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 00:43:14 IQ138000 wb-gsm[4121]: main: Called from pid 3559 (wb-gsm-mm)
Oct 11 00:43:14 IQ138000 wb-gsm[4132]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:43:14 IQ138000 wb-gsm[4155]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:43:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:15 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:15 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:16 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:43:16 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 00:43:16 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 00:43:16 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 00:43:16 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:16 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 00:43:19 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:19 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 00:43:19 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:19 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:19 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 00:43:19 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:43:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 00:43:19 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:19 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 00:43:19 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 knxd[4555]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:43:19 IQ138000 knxd[4555]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: MQTT broker localhost:1883
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:43:19 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: w1 thread Started
Oct 11 00:43:19 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:43:19 IQ138000 wb-mqtt-w1[4560]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:43:19 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:43:19 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:43:19 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 00:43:19 IQ138000 systemd[1]: Started User command handler service.
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 00:43:19 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:19 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 00:43:19 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 00:43:19 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.219s CPU time.
Oct 11 00:43:19 IQ138000 python3[2000]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 00:43:19 IQ138000 python3[2000]:  
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:20 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <warn>  [1760143401.5275] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <info>  [1760143401.5277] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <info>  [1760143401.5298] manager: NetworkManager state is now DISCONNECTED
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <warn>  [1760143401.5319] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <info>  [1760143401.5367] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:21 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:43:21 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <info>  [1760143401.5700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 00:43:21 IQ138000 NetworkManager[404]: <info>  [1760143401.5702] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 00:43:21 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:43:21 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:43:21 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 00:43:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:43:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:43:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:43:23 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:23 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 00:43:23 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 00:43:24 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 00:43:24 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 00:43:24 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 00:43:24 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 00:43:24 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 00:43:24 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 00:43:24 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 00:43:24 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 00:43:24 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 00:43:24 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 00:43:24 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:43:24 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 00:43:24 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:43:24 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 00:43:24 IQ138000 systemd[1]: Started User command handler service.
Oct 11 00:43:24 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 00:43:24 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 00:43:24 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 00:43:24 IQ138000 watchdog[4626]: starting daemon (5.16):
Oct 11 00:43:24 IQ138000 watchdog[4626]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 00:43:24 IQ138000 watchdog[4626]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 00:43:24 IQ138000 watchdog[4626]:  ping: no machine to check
Oct 11 00:43:24 IQ138000 watchdog[4626]:  file: no file to check
Oct 11 00:43:24 IQ138000 watchdog[4626]:  pidfile: /var/run/sshd.pid
Oct 11 00:43:24 IQ138000 watchdog[4626]:  interface: no interface to check
Oct 11 00:43:24 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 00:43:24 IQ138000 watchdog[4626]:  temperature: no sensors to check
Oct 11 00:43:24 IQ138000 watchdog[4626]:  no test binary files
Oct 11 00:43:24 IQ138000 watchdog[4626]:  no repair binary files
Oct 11 00:43:24 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 00:43:24 IQ138000 watchdog[4626]:  error retry time-out = 30 seconds
Oct 11 00:43:24 IQ138000 watchdog[4626]:  repair attempts = 1
Oct 11 00:43:24 IQ138000 watchdog[4626]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 00:43:24 IQ138000 watchdog[4626]: watchdog now set to 120 seconds
Oct 11 00:43:24 IQ138000 watchdog[4626]: hardware watchdog identity: WBEC WDT
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:24 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:24 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 00:43:24 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 00:43:24 IQ138000 systemd[1]: Startup finished in 3.792s (kernel) + 50.075s (userspace) = 53.867s.
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:43:24 IQ138000 wb-rules[4607]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 00:43:24 IQ138000 wb-rules[4607]: INFO: driver is created
Oct 11 00:43:24 IQ138000 wb-rules[4607]: INFO: driver loop is started
Oct 11 00:43:24 IQ138000 wb-rules[4607]: INFO: wait for driver to become ready
Oct 11 00:43:24 IQ138000 wb-rules[4607]: INFO: [wbgo_mqtt] rules-IQ138000-4607: MQTT connection established
Oct 11 00:43:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 00:43:24 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:25 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:26 IQ138000 wb-rules[4607]: INFO: driver is ready
Oct 11 00:43:26 IQ138000 wb-rules[4607]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 00:43:26 IQ138000 wb-rules[4607]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4607: MQTT connection established
Oct 11 00:43:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:26 IQ138000 wb-rules[4607]: INFO: [engine] Starting main loop
Oct 11 00:43:26 IQ138000 wb-rules[4607]: INFO: the engine is ready
Oct 11 00:43:26 IQ138000 wb-rules[4607]: INFO: [engine] Starting sync loop
Oct 11 00:43:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:27 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 00:43:27 IQ138000 wb-rules[4607]: WARNING: [rule warning] DAC: no config file
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 00:43:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:28 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:28 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 0e:b8:52:64:c6:a3
Oct 11 00:43:28 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 00:43:28 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 00:43:28 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 NetworkManager[404]: <info>  [1760143408.2408] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 00:43:28 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 00:43:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 00:43:28 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 00:43:28 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 00:43:28 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 00:43:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 00:43:28 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 00:43:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 systemd-udevd[4936]: Using default interface naming scheme 'v247'.
Oct 11 00:43:28 IQ138000 systemd-udevd[4936]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 00:43:28 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 00:43:29 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 00:43:29 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:43:29 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 knxd[4999]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:43:29 IQ138000 knxd[4999]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:43:29 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:43:29 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:43:29 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:29 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 00:43:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:30 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 00:43:30 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 00:43:30 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:43:30 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 00:43:30 IQ138000 python3[2000]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 00:43:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:31 IQ138000 wb-rules[4607]: INFO: all rule files are loaded
Oct 11 00:43:31 IQ138000 wb-gsm[5022]: mm_on: Waiting for modem to start
Oct 11 00:43:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:43:31 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 00:43:31 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 00:43:31 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 00:43:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:31 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:32 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:33 IQ138000 npm[3723]: [2025-10-11 00:43:33] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:33 IQ138000 npm[3723]: [2025-10-11 00:43:33] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 00:43:33 IQ138000 npm[3723]: [2025-10-11 00:43:33] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 00:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 00:43:34 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:43:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:43:34 IQ138000 npm[3723]: [2025-10-11 00:43:34] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 00:43:35 IQ138000 npm[3723]: [2025-10-11 00:43:35] info:         zh:zstack:znp: Serialport opened
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 00:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 00:43:36 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 00:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 00:43:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 00:43:37 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 03:43:38.117+00:00
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T03:43:38.117Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143598133,"cmd_timestamp_ms":1760143418133,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143598133,"cmd_timestamp_ms":1760143418133,"source":"schedule"}
Oct 11 00:43:38 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: Currently 4 devices are joined.
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 03:43:38.545+00:00
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T03:43:38.545Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143598559,"cmd_timestamp_ms":1760143418559,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143598559,"cmd_timestamp_ms":1760143418559,"source":"schedule"}
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m: Connected to MQTT server
Oct 11 00:43:38 IQ138000 npm[3723]: [2025-10-11 00:43:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 03:43:38.700+00:00
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T03:43:38.700Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143598721,"cmd_timestamp_ms":1760143418721,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143598721,"cmd_timestamp_ms":1760143418721,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 03:43:38.851+00:00
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T03:43:38.851Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143598883,"cmd_timestamp_ms":1760143418883,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143598883,"cmd_timestamp_ms":1760143418883,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 03:43:38.960+00:00
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T03:43:38.960Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143598989,"cmd_timestamp_ms":1760143418989,"source":"schedule"}
Oct 11 00:43:38 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143598989,"cmd_timestamp_ms":1760143418989,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:43:39 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:43:39 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:43:39 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 03:43:39.101+00:00
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 00:43:39 IQ138000 npm[3723]: [2025-10-11 00:43:39] info:         z2m: Started frontend on port 8282
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T03:43:39.101Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143599114,"cmd_timestamp_ms":1760143419114,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143599114,"cmd_timestamp_ms":1760143419114,"source":"schedule"}
Oct 11 00:43:39 IQ138000 npm[3723]: [2025-10-11 00:43:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 00:43:39 IQ138000 npm[3723]: [2025-10-11 00:43:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 00:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:39 IQ138000 npm[3723]: [2025-10-11 00:43:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 00:43:39 IQ138000 npm[3723]: [2025-10-11 00:43:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 00:43:39 IQ138000 npm[3723]: [2025-10-11 00:43:39] info:         z2m: Zigbee2MQTT started!
Oct 11 00:43:39 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 03:43:39.417+00:00
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T03:43:39.417Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143599433,"cmd_timestamp_ms":1760143419433,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143599433,"cmd_timestamp_ms":1760143419433,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 03:43:39.493+00:00
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T03:43:39.493Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 00:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143599503,"cmd_timestamp_ms":1760143419503,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143599503,"cmd_timestamp_ms":1760143419503,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 00:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 03:43:39.904+00:00
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T03:43:39.904Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143599921,"cmd_timestamp_ms":1760143419921,"source":"schedule"}
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143599921,"cmd_timestamp_ms":1760143419921,"source":"schedule"}
Oct 11 00:43:39 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 00:43:39 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:39 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:43:39 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 00:43:40 IQ138000 knxd[5194]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:43:40 IQ138000 knxd[5194]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:43:40 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:43:40 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:43:40 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 03:43:40.167+00:00
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T03:43:40.167Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143600178,"cmd_timestamp_ms":1760143420178,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143600178,"cmd_timestamp_ms":1760143420178,"source":"schedule"}
Oct 11 00:43:40 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 03:43:40.349+00:00
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T03:43:40.349Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143600365,"cmd_timestamp_ms":1760143420365,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143600365,"cmd_timestamp_ms":1760143420365,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 03:43:40.519+00:00
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 00:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T03:43:40.519Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143600533,"cmd_timestamp_ms":1760143420533,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143600533,"cmd_timestamp_ms":1760143420533,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 03:43:40.709+00:00
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T03:43:40.709Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143600719,"cmd_timestamp_ms":1760143420719,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143600719,"cmd_timestamp_ms":1760143420719,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 03:43:40.858+00:00
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T03:43:40.858Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143600869,"cmd_timestamp_ms":1760143420869,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143600869,"cmd_timestamp_ms":1760143420869,"source":"schedule"}
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 00:43:40 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 03:43:40.998+00:00
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T03:43:40.998Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143601007,"cmd_timestamp_ms":1760143421007,"source":"schedule"}
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143601007,"cmd_timestamp_ms":1760143421007,"source":"schedule"}
Oct 11 00:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:41 IQ138000 wb-watchdog[5240]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 00:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 00:43:41 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 00:43:41 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 00:43:42 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 00:43:42 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 00:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:42 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:42 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:42 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 00:43:42 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 00:43:42 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 00:43:43 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:43:44 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:43:44 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:44 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:45 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:46 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:47 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:48 IQ138000 ModemManager[479]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 00:43:48 IQ138000 ModemManager[479]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 00:43:48 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:49 IQ138000 ModemManager[479]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 00:43:49 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 00:43:49 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:43:49 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 00:43:50 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 00:43:50 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 00:43:50 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:43:50 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:43:50 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 00:43:50 IQ138000 knxd[5383]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:43:50 IQ138000 knxd[5383]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:43:50 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:43:50 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:43:50 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:43:50 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 00:43:50 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 00:43:50 IQ138000 ModemManager[479]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7574] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7594] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7614] device (ttyUSB1): modem state 'enabling'
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7641] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7666] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7752] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7769] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:50 IQ138000 NetworkManager[404]: <info>  [1760143430.7787] manager: NetworkManager state is now CONNECTING
Oct 11 00:43:50 IQ138000 ModemManager[479]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 00:43:50 IQ138000 wb-mqtt-nm-helper[2082]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 00:43:50 IQ138000 ModemManager[479]: <info>  [modem0] power state updated: on
Oct 11 00:43:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:43:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:43:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:43:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 00:43:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:43:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 00:43:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 00:43:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 00:43:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 00:43:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 00:43:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 00:43:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:43:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:43:50 IQ138000 python3[2000]:            |                state: enabling
Oct 11 00:43:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:43:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:43:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 00:43:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:43:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:43:50 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 00:43:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 00:43:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:51 IQ138000 python3[2000]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 00:43:51 IQ138000 python3[2000]:  successfully requested primary SIM switch in modem
Oct 11 00:43:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:52 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:43:53 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 00:43:53 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:43:53 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:43:53 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 00:43:53 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 00:43:53 IQ138000 lsyncd[5426]: 00:43:53 Normal: --- Startup ---
Oct 11 00:43:53 IQ138000 lsyncd[5426]: 00:43:53 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 00:43:53 IQ138000 lsyncd[5426]: iq_network_manager/iq_network_manager.log
Oct 11 00:43:53 IQ138000 lsyncd[5426]: messages
Oct 11 00:43:53 IQ138000 lsyncd[5426]: journal
Oct 11 00:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:43:53 IQ138000 lsyncd[5428]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 00:43:53 IQ138000 lsyncd[5427]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 00:43:53 IQ138000 lsyncd[5427]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 00:43:53 IQ138000 lsyncd[5426]: 00:43:53 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 00:43:53 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 00:43:53 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 00:43:54 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 00:43:54 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 00:43:54 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] simple connect started...
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (6/10): register
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 00:43:55 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 00:43:55 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 00:43:55 IQ138000 NetworkManager[404]: <info>  [1760143435.3951] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:55 IQ138000 NetworkManager[404]: <info>  [1760143435.3967] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 00:43:55 IQ138000 NetworkManager[404]: <info>  [1760143435.4005] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 00:43:55 IQ138000 NetworkManager[404]: <info>  [1760143435.4026] ppp-manager: starting PPP connection
Oct 11 00:43:55 IQ138000 NetworkManager[404]: <info>  [1760143435.4160] ppp-manager: pppd started with pid 5439
Oct 11 00:43:55 IQ138000 pppd[5439]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 00:43:55 IQ138000 NetworkManager[5439]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: initializing
Oct 11 00:43:55 IQ138000 pppd[5439]: pppd 2.4.9 started by root, uid 0
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 00:43:55 IQ138000 pppd[5439]: Using interface ppp0
Oct 11 00:43:55 IQ138000 NetworkManager[5439]: Using interface ppp0
Oct 11 00:43:55 IQ138000 NetworkManager[5439]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 00:43:55 IQ138000 pppd[5439]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 00:43:55 IQ138000 NetworkManager[404]: <info>  [1760143435.4841] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 00:43:55 IQ138000 pppd[5439]: PAP authentication succeeded
Oct 11 00:43:55 IQ138000 NetworkManager[5439]: PAP authentication succeeded
Oct 11 00:43:55 IQ138000 pppd[5439]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 00:43:55 IQ138000 pppd[5439]: kernel does not support PPP filtering
Oct 11 00:43:55 IQ138000 NetworkManager[5439]: kernel does not support PPP filtering
Oct 11 00:43:55 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 00:43:55 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 00:43:55 IQ138000 ModemManager[479]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 00:43:55 IQ138000 pppd[5439]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 00:43:55 IQ138000 NetworkManager[5439]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 00:43:56 IQ138000 pppd[5439]: local  IP address 10.5.42.132
Oct 11 00:43:56 IQ138000 NetworkManager[5439]: local  IP address 10.5.42.132
Oct 11 00:43:56 IQ138000 NetworkManager[5439]: remote IP address 10.64.64.64
Oct 11 00:43:56 IQ138000 NetworkManager[5439]: primary   DNS address 172.23.10.130
Oct 11 00:43:56 IQ138000 NetworkManager[5439]: secondary DNS address 172.23.10.131
Oct 11 00:43:56 IQ138000 pppd[5439]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 00:43:56 IQ138000 pppd[5439]: remote IP address 10.64.64.64
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.0070] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:43:56 IQ138000 pppd[5439]: primary   DNS address 172.23.10.130
Oct 11 00:43:56 IQ138000 pppd[5439]: secondary DNS address 172.23.10.131
Oct 11 00:43:56 IQ138000 pppd[5439]: nm-ppp-plugin: ip-up event
Oct 11 00:43:56 IQ138000 pppd[5439]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.0161] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.0185] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.0243] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.0341] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 00:43:56 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:43:56 IQ138000 dbus-daemon[297]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.0773] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:56 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:43:56 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 00:43:56 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 00:43:56 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.1719] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.1777] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.1800] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.1820] device (ttyUSB1): Activation: successful, device activated.
Oct 11 00:43:56 IQ138000 NetworkManager[404]: <info>  [1760143436.1894] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
-- Boot ae24333c890949599ae9d604e155d592 --
Oct 11 00:44:18 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 00:44:18 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 00:44:18 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 00:44:18 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 00:44:18 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 00:44:18 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 00:44:18 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 00:44:18 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 00:44:18 IQ138000 kernel: Zone ranges:
Oct 11 00:44:18 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 00:44:18 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 00:44:18 IQ138000 kernel: Movable zone start for each node
Oct 11 00:44:18 IQ138000 kernel: Early memory node ranges
Oct 11 00:44:18 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 00:44:18 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 00:44:18 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 00:44:18 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 00:44:18 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 00:44:18 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 00:44:18 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 00:44:18 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 00:44:18 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 00:44:18 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 00:44:18 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 00:44:18 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 00:44:18 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 00:44:18 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 00:44:18 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 00:44:18 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 00:44:18 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 00:44:18 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 00:44:18 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 00:44:18 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 00:44:18 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 00:44:18 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 00:44:18 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 00:44:18 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 00:44:18 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 00:44:18 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 00:44:18 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 00:44:18 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 00:44:18 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 00:44:18 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 00:44:18 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 00:44:18 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 00:44:18 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 00:44:18 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 00:44:18 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 00:44:18 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 00:44:18 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 00:44:18 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 00:44:18 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 00:44:18 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 00:44:18 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 00:44:18 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 00:44:18 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 00:44:18 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 00:44:18 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 00:44:18 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 00:44:18 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 00:44:18 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 00:44:18 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 00:44:18 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 00:44:18 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 00:44:18 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 00:44:18 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 00:44:18 IQ138000 kernel: devtmpfs: initialized
Oct 11 00:44:18 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 00:44:18 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 00:44:18 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 00:44:18 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 00:44:18 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 00:44:18 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 00:44:18 IQ138000 kernel: No ATAGs?
Oct 11 00:44:18 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 00:44:18 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 00:44:18 IQ138000 kernel: SCSI subsystem initialized
Oct 11 00:44:18 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 00:44:18 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 00:44:18 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 00:44:18 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 00:44:18 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 00:44:18 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 00:44:18 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 00:44:18 IQ138000 kernel: PTP clock support registered
Oct 11 00:44:18 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 00:44:18 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 00:44:18 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 00:44:18 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 00:44:18 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 00:44:18 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 00:44:18 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 00:44:18 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 00:44:18 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 00:44:18 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 00:44:18 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 00:44:18 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 00:44:18 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 00:44:18 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 00:44:18 IQ138000 kernel: Key type id_resolver registered
Oct 11 00:44:18 IQ138000 kernel: Key type id_legacy registered
Oct 11 00:44:18 IQ138000 kernel: Key type asymmetric registered
Oct 11 00:44:18 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 00:44:18 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 00:44:18 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 00:44:18 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 00:44:18 IQ138000 kernel: io scheduler kyber registered
Oct 11 00:44:18 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 00:44:18 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 00:44:18 IQ138000 kernel: brd: module loaded
Oct 11 00:44:18 IQ138000 kernel: loop: module loaded
Oct 11 00:44:18 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 00:44:18 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:44:18 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:44:18 IQ138000 kernel: CAN device driver interface
Oct 11 00:44:18 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 00:44:18 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 00:44:18 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 00:44:18 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 00:44:18 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 00:44:18 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 00:44:18 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 00:44:18 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 00:44:18 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 00:44:18 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 00:44:18 IQ138000 kernel: i2c /dev entries driver
Oct 11 00:44:18 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 00:44:18 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 00:44:18 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 00:44:18 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 00:44:18 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 00:44:18 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 00:44:18 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 00:44:18 IQ138000 kernel: Segment Routing with IPv6
Oct 11 00:44:18 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 00:44:18 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 00:44:18 IQ138000 kernel: can: controller area network core
Oct 11 00:44:18 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 00:44:18 IQ138000 kernel: can: raw protocol
Oct 11 00:44:18 IQ138000 kernel: can: broadcast manager protocol
Oct 11 00:44:18 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 00:44:18 IQ138000 kernel: can: SAE J1939
Oct 11 00:44:18 IQ138000 kernel: Key type dns_resolver registered
Oct 11 00:44:18 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 00:44:18 IQ138000 kernel: registered taskstats version 1
Oct 11 00:44:18 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 00:44:18 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 00:44:18 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 00:44:18 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:44:18 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 00:44:18 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 00:44:18 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 00:44:18 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 00:44:18 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T00:44:14 UTC (1760143454)
Oct 11 00:44:18 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 00:44:18 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:44:18 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 00:44:18 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 00:44:18 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 00:44:18 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 00:44:18 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 00:44:18 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 00:44:18 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 00:44:18 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 00:44:18 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 00:44:18 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 00:44:18 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 00:44:18 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 00:44:18 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: random: fast init done
Oct 11 00:44:18 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 00:44:18 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 00:44:18 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 00:44:18 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 00:44:18 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 00:44:18 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 00:44:18 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 00:44:18 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 00:44:18 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 00:44:18 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:44:18 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:44:18 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 00:44:18 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:44:18 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 00:44:18 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 00:44:18 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 00:44:18 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 00:44:18 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 00:44:18 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 00:44:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 00:44:18 IQ138000 kernel: libphy: stmmac: probed
Oct 11 00:44:18 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:44:18 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 00:44:18 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:44:18 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 00:44:18 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 00:44:18 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:44:18 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 00:44:18 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 00:44:18 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 00:44:18 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 00:44:18 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 00:44:18 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 00:44:18 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 00:44:18 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 00:44:18 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 00:44:18 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 00:44:18 IQ138000 kernel: of_cfs_init
Oct 11 00:44:18 IQ138000 kernel: of_cfs_init: OK
Oct 11 00:44:18 IQ138000 kernel: ALSA device list:
Oct 11 00:44:18 IQ138000 kernel:   No soundcards found.
Oct 11 00:44:18 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 00:44:18 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 00:44:18 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 00:44:18 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 00:44:18 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 00:44:18 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 00:44:18 IQ138000 kernel: devtmpfs: mounted
Oct 11 00:44:18 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 00:44:18 IQ138000 kernel: Run /sbin/init as init process
Oct 11 00:44:18 IQ138000 kernel:   with arguments:
Oct 11 00:44:18 IQ138000 kernel:     /sbin/init
Oct 11 00:44:18 IQ138000 kernel:   with environment:
Oct 11 00:44:18 IQ138000 kernel:     HOME=/
Oct 11 00:44:18 IQ138000 kernel:     TERM=linux
Oct 11 00:44:18 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 00:44:18 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 00:44:18 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 00:44:18 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 00:44:18 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 00:44:18 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:44:18 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 00:44:18 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:44:18 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 00:44:18 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:44:18 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 00:44:18 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 00:44:18 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 00:44:18 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 00:44:18 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 00:44:18 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 00:44:18 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 00:44:18 IQ138000 systemd[1]: Reached target Paths.
Oct 11 00:44:18 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 00:44:18 IQ138000 systemd[1]: Reached target Slices.
Oct 11 00:44:18 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 00:44:18 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 00:44:18 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 00:44:18 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 00:44:18 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 00:44:18 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 00:44:18 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 00:44:18 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 00:44:18 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 00:44:18 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 00:44:18 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 00:44:18 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 00:44:18 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 00:44:18 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 00:44:18 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 00:44:18 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 00:44:18 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 00:44:18 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 00:44:18 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 00:44:18 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 00:44:18 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 00:44:18 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 00:44:18 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 00:44:18 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 00:44:18 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 00:44:18 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 00:44:18 IQ138000 systemd-journald[140]: Journal started
Oct 11 00:44:18 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 00:44:18 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278745/524288 blocks
Oct 11 00:44:18 IQ138000 systemd[1]: Started Journal Service.
Oct 11 00:44:18 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 00:44:18 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 00:44:18 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 00:44:18 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 00:44:18 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 00:44:18 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 00:44:19 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 00:44:19 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 00:44:19 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 00:44:19 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 00:44:19 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 00:44:19 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 00:44:19 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 00:44:19 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 00:44:19 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 00:44:19 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 00:44:19 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 00:44:19 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 00:44:19 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 00:44:19 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 00:44:19 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 00:44:19 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 00:44:19 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 00:44:19 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 00:44:20 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 00:44:20 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 00:44:20 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 00:44:20 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 00:44:20 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 00:44:20 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 00:44:20 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 00:44:20 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 00:44:20 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 00:44:20 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 00:44:20 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 00:44:20 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 00:44:20 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 00:44:20 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 00:44:20 IQ138000 systemd-udevd[159]: eth1: Failed to query device driver: Device or resource busy
Oct 11 00:44:20 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 00:44:20 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 00:44:20 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 00:44:20 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 00:44:21 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 00:44:21 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 00:44:21 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 00:44:21 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 00:44:21 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 00:44:21 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 00:44:21 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 00:44:21 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 00:44:21 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 00:44:21 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 00:44:21 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 00:44:21 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 00:44:21 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 00:44:21 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 00:44:21 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 00:44:21 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 00:44:21 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 00:44:21 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 00:44:21 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:44:21 IQ138000 systemd-udevd[157]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:44:21 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 00:44:21 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 00:44:21 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 00:44:21 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 00:44:21 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 00:44:21 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 00:44:21 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 00:44:21 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 00:44:21 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 00:44:21 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 00:44:21 IQ138000 systemd[1]: Reached target Swap.
Oct 11 00:44:21 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 00:44:21 IQ138000 systemd-fsck[216]: data: clean, 16430/328656 files, 370343/1313536 blocks
Oct 11 00:44:21 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 00:44:21 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 00:44:21 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 00:44:21 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 00:44:21 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 00:44:22 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 00:44:22 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 00:44:22 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 00:44:22 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 00:44:22 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.494ms for 461 entries.
Oct 11 00:44:22 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 446.4M, max 496.6M, 50.1M free.
Oct 11 00:44:22 IQ138000 kernel: random: crng init done
Oct 11 00:44:22 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 00:44:22 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 00:44:22 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 00:44:22 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 00:44:22 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 00:44:22 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 00:44:22 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 00:44:23 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 00:44:23 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 00:44:23 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 00:44:23 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 00:44:23 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 00:44:23 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 00:44:23 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 00:44:23 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 00:44:23 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 00:44:23 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 00:44:23 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 00:44:23 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 00:44:23 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 00:44:23 IQ138000 systemd[1]: Reached target Timers.
Oct 11 00:44:23 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 00:44:23 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 00:44:23 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 00:44:23 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 00:44:23 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 00:44:23 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 00:44:23 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 00:44:23 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 00:44:23 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 00:44:23 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 00:44:23 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 00:44:23 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 00:44:23 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 00:44:23 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 00:44:24 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 00:44:24 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 00:44:24 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 00:44:24 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 00:44:24 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 00:44:24 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 00:44:24 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 00:44:24 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 00:44:24 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 00:44:24 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 00:44:24 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 00:44:24 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 00:44:24 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 00:44:24 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 00:44:24 IQ138000 migrate.sh[321]: Error: No such file or directory
Oct 11 00:44:24 IQ138000 wb-watchdog[326]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:44:24 IQ138000 migrate.sh[330]: Error: No such file or directory
Oct 11 00:44:24 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 00:44:24 IQ138000 migrate.sh[340]: Error: No such file or directory
Oct 11 00:44:24 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 00:44:24 IQ138000 reverse-ssh.sh[346]: Error: No such file or directory
Oct 11 00:44:24 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:44:24 IQ138000 polkitd[331]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 00:44:24 IQ138000 migrate.sh[355]: Error: No such file or directory
Oct 11 00:44:24 IQ138000 systemd[1]: Started watch config files.
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 00:44:24 IQ138000 rules-preprocessor[341]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 00:44:24 IQ138000 rules-preprocessor[341]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 00:44:24 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 00:44:24 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 00:44:24 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 00:44:24 IQ138000 migrate.sh[368]: Error: No such file or directory
Oct 11 00:44:24 IQ138000 wb-watch-configs[377]: Watched dirs: /etc /etc/network
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Successfully dropped root privileges.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: avahi-daemon 0.8 starting up.
Oct 11 00:44:24 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Successfully called chroot().
Oct 11 00:44:24 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Successfully dropped remaining capabilities.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: No service file found in /etc/avahi/services.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: New relevant interface lo.IPv6 for mDNS.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: New relevant interface lo.IPv4 for mDNS.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Network interface enumeration completed.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Registering new address record for ::1 on lo.*.
Oct 11 00:44:24 IQ138000 avahi-daemon[374]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 00:44:24 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:44:24 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 00:44:24 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 00:44:24 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 00:44:24 IQ138000 wpa_supplicant[385]: Successfully initialized wpa_supplicant
Oct 11 00:44:24 IQ138000 systemd-logind[349]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 00:44:24 IQ138000 systemd-logind[349]: New seat seat0.
Oct 11 00:44:24 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 00:44:24 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 00:44:24 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:24 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 00:44:24 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 00:44:24 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 00:44:24 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:24 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 00:44:24 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 00:44:25 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 00:44:25 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 00:44:25 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 00:44:25 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:25 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 00:44:25 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 00:44:25 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 00:44:25 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 00:44:25 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:44:25 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 00:44:25 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 00:44:25 IQ138000 NetworkManager[406]: <info>  [1760143465.2885] NetworkManager (version 1.42.4) is starting... (boot:ae24333c-8909-4959-9ae9-d604e155d592)
Oct 11 00:44:25 IQ138000 NetworkManager[406]: <info>  [1760143465.2889] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 00:44:25 IQ138000 NetworkManager[406]: <info>  [1760143465.3000] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 00:44:25 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 00:44:25 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 00:44:25 IQ138000 NetworkManager[406]: <info>  [1760143465.3444] manager[0x6c6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 00:44:25 IQ138000 systemd[1]: Started User Login Management.
Oct 11 00:44:25 IQ138000 avahi-daemon[374]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3050459920.
Oct 11 00:44:25 IQ138000 monit[323]: Starting daemon monitor: monit.
Oct 11 00:44:25 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 00:44:25 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 00:44:25 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 00:44:25 IQ138000 systemd[1]: Started Network Manager.
Oct 11 00:44:25 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 00:44:25 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 00:44:25 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 00:44:25 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 00:44:25 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 00:44:25 IQ138000 ModemManager[488]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 00:44:26 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 00:44:26 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.0949] hostname: hostname: using hostnamed
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.0952] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.0988] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1074] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1097] manager[0x6c6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1100] manager[0x6c6900]: rfkill: WWAN hardware radio set enabled
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1438] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1507] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1541] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 00:44:26 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1813] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1855] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1890] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1906] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1920] manager: Networking is enabled by state file
Oct 11 00:44:26 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1988] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1991] settings: Loaded settings plugin: keyfile (internal)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1993] ifupdown: management mode: unmanaged
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1994] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.1996] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 00:44:26 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.2848] dhcp: init: Using DHCP client 'internal'
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.2872] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.2977] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.3019] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.3074] device (lo): Activation: starting connection 'lo' (b8f7202d-044f-462e-9457-85b957fea03e)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.3153] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.3180] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:26 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 00:44:26 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.6741] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.6762] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.6796] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.6825] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:26 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 00:44:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 00:44:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 00:44:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 00:44:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 00:44:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.8806] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.8856] device (wlan0): driver supports Access Point (AP) mode
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.8925] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 00:44:26 IQ138000 NetworkManager[406]: <info>  [1760143466.8949] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7025] device (wlan1): driver supports Access Point (AP) mode
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7096] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7152] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7647] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7680] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7709] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.7808] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 wpa_supplicant[385]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.8480] modem-manager: ModemManager available
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.8488] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.8501] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 00:44:27 IQ138000 NetworkManager[406]: <info>  [1760143467.8535] device (lo): Activation: successful, device activated.
Oct 11 00:44:27 IQ138000 wpa_supplicant[385]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1319] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1328] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1351] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1371] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1443] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1449] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1470] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1534] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1652] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1695] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1730] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 00:44:28 IQ138000 NetworkManager[406]: <info>  [1760143468.1784] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:28 IQ138000 ModemManager[488]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 00:44:28 IQ138000 ModemManager[488]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 00:44:29 IQ138000 ModemManager[488]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 00:44:31 IQ138000 init.sh[1321]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 00:44:31 IQ138000 init.sh[1336]: In file included from -:16:
Oct 11 00:44:31 IQ138000 init.sh[1336]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:32 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:44:32 IQ138000 init.sh[1321]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 00:44:32 IQ138000 init.sh[1321]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 00:44:32 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 00:44:32 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:32 IQ138000 init.sh[1321]: ...
Oct 11 00:44:32 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 00:44:32 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:32 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 00:44:33 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 00:44:33 IQ138000 init.sh[1321]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 00:44:33 IQ138000 init.sh[1430]: In file included from -:24:
Oct 11 00:44:33 IQ138000 init.sh[1430]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:33 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:44:33 IQ138000 init.sh[1321]: ...
Oct 11 00:44:33 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 00:44:33 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:33 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 00:44:33 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 00:44:33 IQ138000 init.sh[1321]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 00:44:33 IQ138000 init.sh[1468]: In file included from -:11:
Oct 11 00:44:33 IQ138000 init.sh[1468]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:34 IQ138000 init.sh[1321]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 00:44:34 IQ138000 init.sh[1491]: In file included from -:11:
Oct 11 00:44:34 IQ138000 init.sh[1491]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:44:34 IQ138000 init.sh[1321]: ...
Oct 11 00:44:34 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 00:44:34 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 00:44:34 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 00:44:34 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 00:44:34 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 00:44:34 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 00:44:34 IQ138000 systemd[1]: Reached target Network.
Oct 11 00:44:34 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 00:44:34 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 00:44:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:44:34 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 00:44:34 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 00:44:34 IQ138000 lsyncd[1616]: 00:44:34 Normal: --- Startup ---
Oct 11 00:44:34 IQ138000 lsyncd[1616]: 00:44:34 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 00:44:34 IQ138000 lsyncd[1616]: iq_network_manager/iq_network_manager.log
Oct 11 00:44:34 IQ138000 lsyncd[1616]: journal
Oct 11 00:44:34 IQ138000 lsyncd[1616]: messages
Oct 11 00:44:34 IQ138000 knxd[1609]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:44:34 IQ138000 knxd[1609]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:44:34 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 00:44:35 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 00:44:35 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 00:44:35 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 00:44:35 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 00:44:35 IQ138000 ntpd[1626]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 00:44:35 IQ138000 ntpd[1626]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 00:44:35 IQ138000 ntpd[1626]: ----------------------------------------------------
Oct 11 00:44:35 IQ138000 ntpd[1626]: ntp-4 is maintained by Network Time Foundation,
Oct 11 00:44:35 IQ138000 ntpd[1626]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 00:44:35 IQ138000 ntpd[1626]: corporation.  Support and training for ntp-4 are
Oct 11 00:44:35 IQ138000 ntpd[1626]: available at https://www.nwtime.org/support
Oct 11 00:44:35 IQ138000 lsyncd[1628]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 00:44:35 IQ138000 ntpd[1626]: ----------------------------------------------------
Oct 11 00:44:35 IQ138000 lsyncd[1624]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 00:44:35 IQ138000 lsyncd[1624]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 00:44:35 IQ138000 ntpd[1650]: proto: precision = 1.041 usec (-20)
Oct 11 00:44:35 IQ138000 lsyncd[1616]: 00:44:35 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 00:44:35 IQ138000 ntpd[1650]: basedate set to 2020-09-11
Oct 11 00:44:35 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 00:44:35 IQ138000 ntpd[1650]: gps base set to 2020-09-13 (week 2123)
Oct 11 00:44:35 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 00:44:35 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 00:44:35 IQ138000 ntpd[1650]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 00:44:35 IQ138000 ntpd[1650]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 00:44:35 IQ138000 ntpd[1650]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 00:44:35 IQ138000 ntpd[1650]: Listen normally on 3 lo [::1]:123
Oct 11 00:44:35 IQ138000 ntpd[1650]: Listening on routing socket on fd #20 for interface updates
Oct 11 00:44:35 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 00:44:35 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 00:44:35 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 00:44:35 IQ138000 persist_meter_data.sh[1651]: Error: No such file or directory
Oct 11 00:44:35 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 00:44:35 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 00:44:35 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 00:44:35 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 00:44:35 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:44:35 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 00:44:35 IQ138000 wb-mqtt-w1[1694]: MQTT broker localhost:1883
Oct 11 00:44:35 IQ138000 wb-mqtt-w1[1694]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:35 IQ138000 wb-mqtt-w1[1694]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 00:44:35 IQ138000 wb-mqtt-w1[1694]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 00:44:35 IQ138000 wb-mqtt-w1[1694]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 00:44:35 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:44:35 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 00:44:35 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 00:44:35 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 00:44:35 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 00:44:35 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 00:44:35 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 00:44:35 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:35 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:44:35 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 00:44:35 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 00:44:35 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 00:44:35 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:35 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 00:44:35 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 00:44:35 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:44:35 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 00:44:35 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 00:44:36 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 00:44:36 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 00:44:36 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 00:44:36 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 00:44:36 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 00:44:36 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 00:44:36 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 00:44:36 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 00:44:36 IQ138000 ntpd[1650]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:44:36 IQ138000 wb-connection-manager[1508]: Connection LegacyWiFi not found, skipping
Oct 11 00:44:36 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 00:44:36 IQ138000 sshd[1739]: Server listening on 0.0.0.0 port 22.
Oct 11 00:44:36 IQ138000 sshd[1739]: Server listening on :: port 22.
Oct 11 00:44:36 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 00:44:36 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 00:44:36 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 00:44:36 IQ138000 vnstatd[1663]: Info: vnStat daemon 2.6 started. (pid:1663 uid:110 gid:117 64-bit)
Oct 11 00:44:36 IQ138000 vnstatd[1663]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 00:44:36 IQ138000 vnstatd[1663]: Info: Interface "ppp0" disabled.
Oct 11 00:44:36 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:44:36 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 00:44:36 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 00:44:36 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:36 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 00:44:36 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 00:44:36 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 00:44:36 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 00:44:36 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:44:36 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 00:44:36 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 00:44:36 IQ138000 reverse-ssh.sh[1852]: Error: No such file or directory
Oct 11 00:44:36 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 00:44:36 IQ138000 NetworkManager[406]: <error> [1760143476.9039] audit: failed to open auditd socket: Protocol not supported
Oct 11 00:44:36 IQ138000 NetworkManager[406]: <info>  [1760143476.9041] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1508 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 00:44:36 IQ138000 wb-connection-manager[1508]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 00:44:36 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:37 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 00:44:37 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 00:44:37 IQ138000 ntpd[1650]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:44:37 IQ138000 wb-adjust-systime[1859]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 00:44:37 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 00:44:37 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Warning: Error resolving bridge address: Name or service not known.
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 00:44:37 IQ138000 mosquitto[1894]: 1760143477: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 00:44:37 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 00:44:37 IQ138000 wb-adjust-systime[1859]: Drift file is valid (was recently edited)
Oct 11 00:44:37 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 00:44:37 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.5330] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.5336] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1508 uid=0 result="success"
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.5342] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.5474] manager: NetworkManager state is now CONNECTING
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.5661] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:37 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 00:44:37 IQ138000 knxd[1913]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:44:37 IQ138000 knxd[1913]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:44:37 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.6417] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.6420] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.6670] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:37 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7445] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7608] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7633] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7658] Config: added 'scan_ssid' value '1'
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7662] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7664] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 00:44:37 IQ138000 NetworkManager[406]: <info>  [1760143477.7665] Config: added 'psk' value '<hidden>'
Oct 11 00:44:37 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 00:44:37 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 00:44:37 IQ138000 wb-mqtt-db[1960]: MQTT broker localhost:1883
Oct 11 00:44:37 IQ138000 wb-mqtt-db[1960]: Config file /etc/wb-mqtt-db.conf
Oct 11 00:44:37 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 00:44:38 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:38 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:38 IQ138000 wb-mqtt-db[1960]: INFO: [sqlite] Creating tables if necessary
Oct 11 00:44:38 IQ138000 wb-mqtt-db[1960]: INFO: [sqlite] Create indices if necessary
Oct 11 00:44:38 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 00:44:38 IQ138000 wb-mqtt-db[1960]: INFO: [sqlite] Analyzing data table
Oct 11 00:44:38 IQ138000 ntpd[1650]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:44:38 IQ138000 systemd[1]: Started metrics sender.
Oct 11 00:44:38 IQ138000 wb-mqtt-logs[1980]: MQTT broker localhost:1883
Oct 11 00:44:38 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 00:44:38 IQ138000 wb-mqtt-logs[1980]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:38 IQ138000 wb-mqtt-logs[1980]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:38 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 00:44:38 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 00:44:38 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 00:44:38 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 00:44:39 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 00:44:39 IQ138000 wb-mqtt-gpio[1805]: INFO: [gpio driver] Started
Oct 11 00:44:39 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.542s CPU time.
Oct 11 00:44:39 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 00:44:39 IQ138000 wb-mqtt-confed[1956]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:39 IQ138000 wb-mqtt-confed[1956]: INFO: [wbgo_mqtt] confed-IQ138000-1956: MQTT connection established
Oct 11 00:44:39 IQ138000 ntpd[1650]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2013]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:44:39 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 00:44:39 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:39 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:44:39 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 00:44:39 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 00:44:39 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 00:44:39 IQ138000 wb-mqtt-mbgate[1993]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:39 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 00:44:39 IQ138000 wb-mqtt-logs[1980]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:39 IQ138000 wb-mqtt-logs[1980]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:39 IQ138000 wb-mqtt-logs[1980]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:39 IQ138000 wb-mqtt-logs[1980]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:39 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:44:39 IQ138000 wb-mqtt-iec104[1967]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:44:39 IQ138000 wb-mqtt-opcua[2125]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 00:44:39 IQ138000 NetworkManager[406]: <info>  [1760143479.9700] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 00:44:39 IQ138000 wb-mqtt-knx[2138]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:39 IQ138000 wb-mqtt-knx[2138]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:39 IQ138000 NetworkManager[406]: <info>  [1760143479.9703] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 00:44:40 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 00:44:40 IQ138000 wb-mqtt-opcua[2125]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 00:44:40 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 00:44:40 IQ138000 wb-mqtt-iec104[2182]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 00:44:40 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:44:40 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 00:44:41 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 00:44:41 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 00:44:41 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 00:44:41 IQ138000 wb-mqtt-iec104[2182]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 00:44:41 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 00:44:41 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 00:44:42 IQ138000 wb-mqtt-knx[2138]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:42 IQ138000 wb-mqtt-knx[2138]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:42 IQ138000 wb-mqtt-knx[2138]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:42 IQ138000 wb-mqtt-knx[2138]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:44:42 IQ138000 wb-mqtt-knx[2138]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 00:44:43 IQ138000 python3[1940]: No data file found at /tmp/network_status_cache.json
Oct 11 00:44:43 IQ138000 python3[1940]: Connecting to MQTT
Oct 11 00:44:43 IQ138000 python3[1940]: Connected to MQTT
Oct 11 00:44:43 IQ138000 python3[1940]: Connection returned result: Connection Accepted.
Oct 11 00:44:43 IQ138000 wpa_supplicant[385]: wlan0: Reject scan trigger since one is already pending
Oct 11 00:44:44 IQ138000 wb-device-manager[1942]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 00:44:44 IQ138000 wb-device-manager[1942]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 00:44:44 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2006 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 00:44:44 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New virtual device lo b8f7202d-044f-462e-9457-85b957fea03e /org/freedesktop/NetworkManager/Settings/7
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 00:44:45 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New active connection lo b8f7202d-044f-462e-9457-85b957fea03e /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 00:44:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:46 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 00:44:46 IQ138000 kernel: dc5ldo: disabling
Oct 11 00:44:46 IQ138000 kernel: dldo4: disabling
Oct 11 00:44:46 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 00:44:46 IQ138000 kernel: vcc-sd: disabling
Oct 11 00:44:47 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 00:44:47 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 00:44:47 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:44:47 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 00:44:47 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: MQTT broker localhost:1883
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] ADC worker thread is started
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 00:44:47 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 00:44:48 IQ138000 wb-mqtt-confed[1956]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-db[1960]: INFO: [sqlite] DB initialization is done
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:44:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-gsm[3321]: main: Called from pid 1 (systemd)
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 00:44:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 00:44:49 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:44:49 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:44:49 IQ138000 wb-gsm[3361]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:44:49 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:44:49 IQ138000 knxd[3378]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:44:49 IQ138000 knxd[3378]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:44:49 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:44:49 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:44:49 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:44:49 IQ138000 wb-usb-otg-start.sh[3440]: : wb-usb-otg-start
Oct 11 00:44:49 IQ138000 wb-usb-otg-start.sh[3440]: main: setup_device()
Oct 11 00:44:49 IQ138000 wb-gsm[3436]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:44:50 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 00:44:50 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 00:44:50 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 00:44:50 IQ138000 kernel: using random self ethernet address
Oct 11 00:44:50 IQ138000 kernel: using random host ethernet address
Oct 11 00:44:50 IQ138000 wb-usb-otg-start.sh[3440]: main: enabling profile rndis
Oct 11 00:44:50 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 00:44:50 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 00:44:50 IQ138000 systemd-udevd[3447]: Using default interface naming scheme 'v247'.
Oct 11 00:44:50 IQ138000 wb-gsm[3493]: should_enable: Should enable GSM modem
Oct 11 00:44:50 IQ138000 NetworkManager[406]: <info>  [1760143490.3485] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 00:44:50 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 00:44:50 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 00:44:50 IQ138000 NetworkManager[406]: <info>  [1760143490.4823] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 00:44:50 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 00:44:51 IQ138000 wb-gsm[3577]: main: Called from pid 3497 (wb-gsm-mm)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 00:44:51 IQ138000 wb-gsm[3588]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 00:44:51 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 00:44:51 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 00:44:52 IQ138000 wb-gsm[3611]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 00:44:52 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 00:44:52 IQ138000 ModemManager[488]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 00:44:53 IQ138000 python3[1940]: Выполнение: service wb-connection-manager stop
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 00:44:53 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 00:44:54 IQ138000 npm[1699]: > zigbee2mqtt@2.1.1 start
Oct 11 00:44:54 IQ138000 npm[1699]: > node index.js
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: DB logger started, go to main loop
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 00:44:54 IQ138000 wb-mqtt-db[1960]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:44:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 00:44:55 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 00:44:56 IQ138000 wb-gsm[3999]: mm_off: Modem is already OFF
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 00:44:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:44:57 IQ138000 npm[3786]: Starting Zigbee2MQTT without watchdog.
Oct 11 00:44:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:44:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:44:57 IQ138000 wb-gsm[4070]: main: Called from pid 3497 (wb-gsm-mm)
Oct 11 00:44:57 IQ138000 wb-gsm[4081]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:44:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:44:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:57 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:44:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:44:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:44:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:44:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:45:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:45:00 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:45:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:45:00 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 00:45:00 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 00:45:00 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:00 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:00 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:00 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:00 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:00 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 00:45:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:45:00 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 00:45:00 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:45:00 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:45:00 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 00:45:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:45:00 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 00:45:00 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 00:45:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:45:00 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:45:00 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:45:00 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:45:00 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 00:45:00 IQ138000 knxd[4404]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:45:00 IQ138000 knxd[4404]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:45:00 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:45:00 IQ138000 wb-mqtt-w1[4418]: MQTT broker localhost:1883
Oct 11 00:45:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:45:01 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:45:01 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 00:45:01 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:45:01 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:45:01 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: w1 thread Started
Oct 11 00:45:01 IQ138000 systemd[1]: Started User command handler service.
Oct 11 00:45:01 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:45:01 IQ138000 wb-mqtt-w1[4418]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:45:01 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 00:45:01 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 00:45:01 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 00:45:01 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.223s CPU time.
Oct 11 00:45:01 IQ138000 python3[1940]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 00:45:01 IQ138000 python3[1940]:  
Oct 11 00:45:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:45:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 CRON[4522]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:45:02 IQ138000 CRON[4536]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 00:45:02 IQ138000 CRON[4522]: pam_unix(cron:session): session closed for user root
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <warn>  [1760143502.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <info>  [1760143502.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <info>  [1760143502.5333] manager: NetworkManager state is now DISCONNECTED
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <warn>  [1760143502.5353] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <info>  [1760143502.5438] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:02 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <info>  [1760143502.5765] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 00:45:02 IQ138000 NetworkManager[406]: <info>  [1760143502.5767] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:45:04 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:45:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:45:05 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 00:45:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:45:06 IQ138000 NetworkManager[406]: <info>  [1760143506.0835] manager: startup complete
Oct 11 00:45:06 IQ138000 python3[1940]: Выполнение: mmcli -m wbc
Oct 11 00:45:06 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 00:45:06 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:06 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 00:45:06 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 00:45:06 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 00:45:06 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 00:45:06 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 00:45:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:06 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 00:45:06 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 00:45:06 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 00:45:06 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 00:45:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:45:06 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 00:45:06 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 00:45:06 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 00:45:06 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 00:45:06 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 00:45:06 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:06 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:45:06 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 00:45:06 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:45:06 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 00:45:06 IQ138000 systemd[1]: Started User command handler service.
Oct 11 00:45:06 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 00:45:06 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 00:45:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:06 IQ138000 wb-rules[4573]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 00:45:07 IQ138000 wb-rules[4573]: INFO: driver is created
Oct 11 00:45:07 IQ138000 wb-rules[4573]: INFO: [wbgo_mqtt] rules-IQ138000-4573: MQTT connection established
Oct 11 00:45:07 IQ138000 wb-rules[4573]: INFO: driver loop is started
Oct 11 00:45:07 IQ138000 wb-rules[4573]: INFO: wait for driver to become ready
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:07 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:45:07 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 00:45:07 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 00:45:07 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 00:45:07 IQ138000 watchdog[4654]: starting daemon (5.16):
Oct 11 00:45:07 IQ138000 watchdog[4654]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 00:45:07 IQ138000 watchdog[4654]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 00:45:07 IQ138000 watchdog[4654]:  ping: no machine to check
Oct 11 00:45:07 IQ138000 watchdog[4654]:  file: no file to check
Oct 11 00:45:07 IQ138000 watchdog[4654]:  pidfile: /var/run/sshd.pid
Oct 11 00:45:07 IQ138000 watchdog[4654]:  interface: no interface to check
Oct 11 00:45:07 IQ138000 watchdog[4654]:  temperature: no sensors to check
Oct 11 00:45:07 IQ138000 watchdog[4654]:  no test binary files
Oct 11 00:45:07 IQ138000 watchdog[4654]:  no repair binary files
Oct 11 00:45:07 IQ138000 watchdog[4654]:  error retry time-out = 30 seconds
Oct 11 00:45:07 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 00:45:07 IQ138000 watchdog[4654]:  repair attempts = 1
Oct 11 00:45:07 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 00:45:07 IQ138000 watchdog[4654]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 00:45:07 IQ138000 watchdog[4654]: watchdog now set to 120 seconds
Oct 11 00:45:07 IQ138000 watchdog[4654]: hardware watchdog identity: WBEC WDT
Oct 11 00:45:07 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:07 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 00:45:07 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 00:45:07 IQ138000 systemd[1]: Startup finished in 3.799s (kernel) + 51.455s (userspace) = 55.254s.
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:09 IQ138000 wb-rules[4573]: INFO: driver is ready
Oct 11 00:45:09 IQ138000 wb-rules[4573]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 00:45:09 IQ138000 wb-rules[4573]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4573: MQTT connection established
Oct 11 00:45:09 IQ138000 wb-rules[4573]: INFO: [engine] Starting main loop
Oct 11 00:45:09 IQ138000 wb-rules[4573]: INFO: the engine is ready
Oct 11 00:45:09 IQ138000 wb-rules[4573]: INFO: [engine] Starting sync loop
Oct 11 00:45:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:45:09 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:10 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 00:45:10 IQ138000 wb-rules[4573]: WARNING: [rule warning] DAC: no config file
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 00:45:10 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:10 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 00:45:10 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 00:45:11 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 00:45:11 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 00:45:11 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:45:11 IQ138000 NetworkManager[406]: <info>  [1760143511.2175] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 00:45:11 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 76:04:ac:96:4d:34
Oct 11 00:45:11 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 00:45:11 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 00:45:11 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 00:45:11 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 00:45:11 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 00:45:11 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 00:45:11 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 00:45:11 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 00:45:11 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:45:11 IQ138000 systemd-udevd[4973]: Using default interface naming scheme 'v247'.
Oct 11 00:45:11 IQ138000 systemd-udevd[4973]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:11 IQ138000 knxd[4979]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:45:11 IQ138000 knxd[4979]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:45:11 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:45:11 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:45:11 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:11 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 00:45:12 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 00:45:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:13 IQ138000 python3[1940]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 wb-rules[4573]: INFO: all rule files are loaded
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:13 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:14 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:14 IQ138000 wb-gsm[5039]: mm_on: Waiting for modem to start
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:14 IQ138000 wpa_supplicant[385]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 00:45:14 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 00:45:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 npm[3786]: [2025-10-11 00:45:17] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:45:17 IQ138000 npm[3786]: [2025-10-11 00:45:17] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 00:45:17 IQ138000 npm[3786]: [2025-10-11 00:45:17] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 00:45:18 IQ138000 npm[3786]: [2025-10-11 00:45:18] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 00:45:18 IQ138000 npm[3786]: [2025-10-11 00:45:18] info:         zh:zstack:znp: Serialport opened
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:18 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:45:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 00:45:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:19 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:20 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 00:45:20 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 00:45:20 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 00:45:20 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 00:45:20 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 03:45:20.629+00:00
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T03:45:20.629Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143700643,"cmd_timestamp_ms":1760143520643,"source":"schedule"}
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143700643,"cmd_timestamp_ms":1760143520643,"source":"schedule"}
Oct 11 00:45:20 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:20 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 03:45:20.909+00:00
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T03:45:20.909Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143700923,"cmd_timestamp_ms":1760143520923,"source":"schedule"}
Oct 11 00:45:20 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760143700923,"cmd_timestamp_ms":1760143520923,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 03:45:21.042+00:00
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T03:45:21.042Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701058,"cmd_timestamp_ms":1760143521058,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701058,"cmd_timestamp_ms":1760143521058,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 03:45:21.253+00:00
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T03:45:21.253Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701278,"cmd_timestamp_ms":1760143521278,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701278,"cmd_timestamp_ms":1760143521278,"source":"schedule"}
Oct 11 00:45:21 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 00:45:21 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:45:21 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:45:21 IQ138000 knxd[5159]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:45:21 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:45:21 IQ138000 knxd[5159]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:45:21 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:45:21 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: Currently 4 devices are joined.
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 03:45:21.599+00:00
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T03:45:21.599Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:45:21 IQ138000 npm[3786]: [2025-10-11 00:45:21] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701624,"cmd_timestamp_ms":1760143521624,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701624,"cmd_timestamp_ms":1760143521624,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 00:45:21 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:21 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 03:45:21.733+00:00
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T03:45:21.733Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701745,"cmd_timestamp_ms":1760143521745,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701745,"cmd_timestamp_ms":1760143521745,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 03:45:21.901+00:00
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T03:45:21.901Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701922,"cmd_timestamp_ms":1760143521922,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143701922,"cmd_timestamp_ms":1760143521922,"source":"schedule"}
Oct 11 00:45:21 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 03:45:22.033+00:00
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T03:45:22.033Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143702051,"cmd_timestamp_ms":1760143522051,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760143702051,"cmd_timestamp_ms":1760143522051,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m: Connected to MQTT server
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 03:45:22.359+00:00
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T03:45:22.359Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143702376,"cmd_timestamp_ms":1760143522376,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143702376,"cmd_timestamp_ms":1760143522376,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:45:22 IQ138000 wb-rules[4573]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:45:22 IQ138000 wb-rules[4573]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:45:22 IQ138000 wb-rules[4573]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 03:45:22.553+00:00
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m: Started frontend on port 8282
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T03:45:22.553Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143702578,"cmd_timestamp_ms":1760143522578,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143702578,"cmd_timestamp_ms":1760143522578,"source":"schedule"}
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 00:45:22 IQ138000 npm[3786]: [2025-10-11 00:45:22] info:         z2m: Zigbee2MQTT started!
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 03:45:22.634+00:00
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T03:45:22.634Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143702654,"cmd_timestamp_ms":1760143522654,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760143702654,"cmd_timestamp_ms":1760143522654,"source":"schedule"}
Oct 11 00:45:22 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 03:45:22.938+00:00
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T03:45:22.938Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143702950,"cmd_timestamp_ms":1760143522950,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143702950,"cmd_timestamp_ms":1760143522950,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 03:45:22.974+00:00
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T03:45:22.974Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143702987,"cmd_timestamp_ms":1760143522987,"source":"schedule"}
Oct 11 00:45:22 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760143702987,"cmd_timestamp_ms":1760143522987,"source":"schedule"}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 00:45:23 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 03:45:23.134+00:00
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T03:45:23.134Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143703146,"cmd_timestamp_ms":1760143523146,"source":"schedule"}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143703146,"cmd_timestamp_ms":1760143523146,"source":"schedule"}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 03:45:23.309+00:00
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T03:45:23.309Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143703318,"cmd_timestamp_ms":1760143523318,"source":"schedule"}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760143703318,"cmd_timestamp_ms":1760143523318,"source":"schedule"}
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 00:45:23 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:23 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 00:45:23 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 00:45:23 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:23 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 00:45:23 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 00:45:23 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 00:45:24 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 00:45:24 IQ138000 wb-watchdog[5272]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 00:45:24 IQ138000 wb-rules[4573]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 npm[3786]: [2025-10-11 00:45:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.6,"last_seen":1760143524421,"linkquality":51,"power_outage_count":35250,"temperature":23.21,"voltage":3085}'
Oct 11 00:45:24 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:45:24 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:45:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:24 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:24 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:24 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 00:45:24 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 00:45:24 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:25 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:27 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:45:27 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:28 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:29 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:30 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:31 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:31 IQ138000 ModemManager[488]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 00:45:31 IQ138000 ModemManager[488]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 00:45:31 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 00:45:31 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:45:31 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:45:31 IQ138000 knxd[5386]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:45:31 IQ138000 knxd[5386]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:45:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:45:31 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:45:31 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:45:32 IQ138000 ModemManager[488]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 00:45:32 IQ138000 ModemManager[488]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 00:45:32 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:32 IQ138000 ModemManager[488]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 00:45:33 IQ138000 ModemManager[488]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 00:45:33 IQ138000 ModemManager[488]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 00:45:33 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:33 IQ138000 ModemManager[488]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 00:45:33 IQ138000 ModemManager[488]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 00:45:33 IQ138000 python3[1940]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:45:33 IQ138000 ModemManager[488]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7299] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7343] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7390] device (ttyUSB1): modem state 'enabling'
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7416] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7469] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7533] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7562] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:33 IQ138000 NetworkManager[406]: <info>  [1760143533.7620] manager: NetworkManager state is now CONNECTING
Oct 11 00:45:33 IQ138000 ModemManager[488]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 00:45:33 IQ138000 wb-mqtt-nm-helper[2006]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 00:45:33 IQ138000 ModemManager[488]: <info>  [modem0] power state updated: on
Oct 11 00:45:33 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:34 IQ138000 python3[1940]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:45:34 IQ138000 python3[1940]:    --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:45:34 IQ138000 python3[1940]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:45:34 IQ138000 python3[1940]:            |                model: A7602E-H
Oct 11 00:45:34 IQ138000 python3[1940]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:45:34 IQ138000 python3[1940]:            |            supported: gsm-umts
Oct 11 00:45:34 IQ138000 python3[1940]:            |              current: gsm-umts
Oct 11 00:45:34 IQ138000 python3[1940]:            |         equipment id: 860803062234204
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   System   |               device: wbc
Oct 11 00:45:34 IQ138000 python3[1940]:            |              drivers: option, rndis_host
Oct 11 00:45:34 IQ138000 python3[1940]:            |               plugin: simtech
Oct 11 00:45:34 IQ138000 python3[1940]:            |         primary port: ttyUSB1
Oct 11 00:45:34 IQ138000 python3[1940]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:45:34 IQ138000 python3[1940]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:45:34 IQ138000 python3[1940]:            |                state: enabling
Oct 11 00:45:34 IQ138000 python3[1940]:            |          power state: on
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:45:34 IQ138000 python3[1940]:            |              current: allowed: any; preferred: none
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   3GPP     |                 imei: 860803062234204
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:45:34 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:34 IQ138000 python3[1940]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:34 IQ138000 python3[1940]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:45:34 IQ138000 python3[1940]:            |                       slot 2: none
Oct 11 00:45:34 IQ138000 python3[1940]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 00:45:34 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:34 IQ138000 python3[1940]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 00:45:34 IQ138000 python3[1940]:  successfully requested primary SIM switch in modem
Oct 11 00:45:35 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:35 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 00:45:35 IQ138000 wb-rules[4573]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:45:35 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:45:35 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 00:45:35 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 00:45:35 IQ138000 lsyncd[5438]: 00:45:35 Normal: --- Startup ---
Oct 11 00:45:35 IQ138000 lsyncd[5438]: 00:45:35 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 00:45:35 IQ138000 lsyncd[5438]: journal
Oct 11 00:45:35 IQ138000 lsyncd[5438]: iq_network_manager/iq_network_manager.log
Oct 11 00:45:35 IQ138000 lsyncd[5438]: messages
Oct 11 00:45:36 IQ138000 lsyncd[5440]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 00:45:36 IQ138000 lsyncd[5439]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 00:45:36 IQ138000 lsyncd[5439]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 00:45:36 IQ138000 lsyncd[5438]: 00:45:36 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 00:45:36 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 00:45:36 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 00:45:37 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 00:45:37 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 00:45:37 IQ138000 wb-rules[4573]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:45:37 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] simple connect started...
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] simple connect state (6/10): register
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 00:45:38 IQ138000 NetworkManager[406]: <info>  [1760143538.5332] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:38 IQ138000 NetworkManager[406]: <info>  [1760143538.5354] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 00:45:38 IQ138000 NetworkManager[406]: <info>  [1760143538.5393] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 00:45:38 IQ138000 NetworkManager[406]: <info>  [1760143538.5420] ppp-manager: starting PPP connection
Oct 11 00:45:38 IQ138000 NetworkManager[406]: <info>  [1760143538.5554] ppp-manager: pppd started with pid 5465
Oct 11 00:45:38 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:38 IQ138000 pppd[5465]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 00:45:38 IQ138000 NetworkManager[5465]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: initializing
Oct 11 00:45:38 IQ138000 pppd[5465]: pppd 2.4.9 started by root, uid 0
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 00:45:38 IQ138000 pppd[5465]: Using interface ppp0
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 00:45:38 IQ138000 NetworkManager[5465]: Using interface ppp0
Oct 11 00:45:38 IQ138000 NetworkManager[5465]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 00:45:38 IQ138000 pppd[5465]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 00:45:38 IQ138000 NetworkManager[406]: <info>  [1760143538.6271] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 00:45:38 IQ138000 pppd[5465]: PAP authentication succeeded
Oct 11 00:45:38 IQ138000 pppd[5465]: kernel does not support PPP filtering
Oct 11 00:45:38 IQ138000 pppd[5465]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 00:45:38 IQ138000 NetworkManager[5465]: PAP authentication succeeded
Oct 11 00:45:38 IQ138000 NetworkManager[5465]: kernel does not support PPP filtering
Oct 11 00:45:38 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 00:45:38 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 00:45:38 IQ138000 ModemManager[488]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 00:45:39 IQ138000 pppd[5465]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 00:45:39 IQ138000 NetworkManager[5465]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 00:45:39 IQ138000 pppd[5465]: local  IP address 10.129.44.40
Oct 11 00:45:39 IQ138000 NetworkManager[5465]: local  IP address 10.129.44.40
Oct 11 00:45:39 IQ138000 NetworkManager[5465]: remote IP address 10.64.64.64
Oct 11 00:45:39 IQ138000 NetworkManager[5465]: primary   DNS address 172.23.10.131
Oct 11 00:45:39 IQ138000 NetworkManager[5465]: secondary DNS address 172.23.10.130
Oct 11 00:45:39 IQ138000 pppd[5465]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 00:45:39 IQ138000 pppd[5465]: remote IP address 10.64.64.64
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.1743] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:45:39 IQ138000 pppd[5465]: primary   DNS address 172.23.10.131
Oct 11 00:45:39 IQ138000 pppd[5465]: secondary DNS address 172.23.10.130
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.1861] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 00:45:39 IQ138000 pppd[5465]: nm-ppp-plugin: ip-up event
Oct 11 00:45:39 IQ138000 pppd[5465]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.1888] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.1939] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.2016] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 00:45:39 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:45:39 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.2453] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:39 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:45:39 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:39 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 00:45:39 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 00:45:39 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.3587] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.3600] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.3620] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.3638] device (ttyUSB1): Activation: successful, device activated.
Oct 11 00:45:39 IQ138000 NetworkManager[406]: <info>  [1760143539.3666] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 00:45:39 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:40 IQ138000 vnstatd[1663]: Info: Interface "ppp0" enabled.
Oct 11 00:45:41 IQ138000 ntpd[1650]: Listen normally on 4 ppp0 10.129.44.40:123
Oct 11 00:45:41 IQ138000 ntpd[1650]: new interface(s) found: waking up resolver
Oct 11 00:45:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:45:41 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 00:45:41 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:45:41 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:45:42 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:45:42 IQ138000 wb-mqtt-knx[2138]: INFO: knxd connected successfully
Oct 11 00:45:42 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:42 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:42 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:43 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:43 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:45:43 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:44 IQ138000 python3[1940]: Выполнение: mmcli -i any
Oct 11 00:45:44 IQ138000 python3[1940]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 00:45:44 IQ138000 python3[1940]:    -------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:44 IQ138000 python3[1940]:   -------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Properties |            active: yes
Oct 11 00:45:44 IQ138000 python3[1940]:              |              imsi: 250997340491874
Oct 11 00:45:44 IQ138000 python3[1940]:              |             iccid: 8970199210429593744
Oct 11 00:45:44 IQ138000 python3[1940]:              |       operator id: 25099
Oct 11 00:45:44 IQ138000 python3[1940]:              |     operator name: Beeline
Oct 11 00:45:44 IQ138000 python3[1940]: Выполнение: mmcli -m wbc
Oct 11 00:45:44 IQ138000 python3[1940]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:45:44 IQ138000 python3[1940]:    --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:45:44 IQ138000 python3[1940]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:45:44 IQ138000 python3[1940]:            |                model: A7602E-H
Oct 11 00:45:44 IQ138000 python3[1940]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:45:44 IQ138000 python3[1940]:            |            supported: gsm-umts
Oct 11 00:45:44 IQ138000 python3[1940]:            |              current: gsm-umts
Oct 11 00:45:44 IQ138000 python3[1940]:            |         equipment id: 860803062234204
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   System   |               device: wbc
Oct 11 00:45:44 IQ138000 python3[1940]:            |              drivers: option, rndis_host
Oct 11 00:45:44 IQ138000 python3[1940]:            |               plugin: simtech
Oct 11 00:45:44 IQ138000 python3[1940]:            |         primary port: ttyUSB1
Oct 11 00:45:44 IQ138000 python3[1940]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:45:44 IQ138000 python3[1940]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:45:44 IQ138000 python3[1940]:            |                state: connected
Oct 11 00:45:44 IQ138000 python3[1940]:            |          power state: on
Oct 11 00:45:44 IQ138000 python3[1940]:            |          access tech: lte
Oct 11 00:45:44 IQ138000 python3[1940]:            |       signal quality: 90% (recent)
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:45:44 IQ138000 python3[1940]:            |              current: allowed: any; preferred: none
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   3GPP     |                 imei: 860803062234204
Oct 11 00:45:44 IQ138000 python3[1940]:            |          operator id: 25099
Oct 11 00:45:44 IQ138000 python3[1940]:            |        operator name: beeline
Oct 11 00:45:44 IQ138000 python3[1940]:            |         registration: home
Oct 11 00:45:44 IQ138000 python3[1940]:            | packet service state: attached
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:44 IQ138000 python3[1940]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:45:44 IQ138000 python3[1940]:            |                       slot 2: none
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:45:44 IQ138000 python3[1940]: Current state: home
Oct 11 00:45:44 IQ138000 python3[1940]: SIM registered in the network.
Oct 11 00:45:44 IQ138000 python3[1940]: Выполнение: mmcli -m wbc
Oct 11 00:45:44 IQ138000 python3[1940]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:45:44 IQ138000 python3[1940]:    --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:45:44 IQ138000 python3[1940]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:45:44 IQ138000 python3[1940]:            |                model: A7602E-H
Oct 11 00:45:44 IQ138000 python3[1940]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:45:44 IQ138000 python3[1940]:            |            supported: gsm-umts
Oct 11 00:45:44 IQ138000 python3[1940]:            |              current: gsm-umts
Oct 11 00:45:44 IQ138000 python3[1940]:            |         equipment id: 860803062234204
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   System   |               device: wbc
Oct 11 00:45:44 IQ138000 python3[1940]:            |              drivers: option, rndis_host
Oct 11 00:45:44 IQ138000 python3[1940]:            |               plugin: simtech
Oct 11 00:45:44 IQ138000 python3[1940]:            |         primary port: ttyUSB1
Oct 11 00:45:44 IQ138000 python3[1940]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:45:44 IQ138000 python3[1940]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:45:44 IQ138000 python3[1940]:            |                state: connected
Oct 11 00:45:44 IQ138000 python3[1940]:            |          power state: on
Oct 11 00:45:44 IQ138000 python3[1940]:            |          access tech: lte
Oct 11 00:45:44 IQ138000 python3[1940]:            |       signal quality: 90% (recent)
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:45:44 IQ138000 python3[1940]:            |              current: allowed: any; preferred: none
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   3GPP     |                 imei: 860803062234204
Oct 11 00:45:44 IQ138000 python3[1940]:            |          operator id: 25099
Oct 11 00:45:44 IQ138000 python3[1940]:            |        operator name: beeline
Oct 11 00:45:44 IQ138000 python3[1940]:            |         registration: home
Oct 11 00:45:44 IQ138000 python3[1940]:            | packet service state: attached
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:44 IQ138000 python3[1940]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:45:44 IQ138000 python3[1940]:            |                       slot 2: none
Oct 11 00:45:44 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:44 IQ138000 python3[1940]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:45:44 IQ138000 python3[1940]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:45 IQ138000 python3[1940]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:45:45 IQ138000 python3[1940]:    -------------------------------
Oct 11 00:45:45 IQ138000 python3[1940]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:45 IQ138000 python3[1940]:   -------------------------------
Oct 11 00:45:45 IQ138000 python3[1940]:   Properties |            active: yes
Oct 11 00:45:45 IQ138000 python3[1940]:              |              imsi: 250997340491874
Oct 11 00:45:45 IQ138000 python3[1940]:              |             iccid: 8970199210429593744
Oct 11 00:45:45 IQ138000 python3[1940]:              |       operator id: 25099
Oct 11 00:45:45 IQ138000 python3[1940]:              |     operator name: Beeline
Oct 11 00:45:45 IQ138000 ntpd[1650]: Soliciting pool server 90.188.6.85
Oct 11 00:45:46 IQ138000 ntpd[1650]: Soliciting pool server 78.36.199.163
Oct 11 00:45:47 IQ138000 ntpd[1650]: Soliciting pool server 89.179.240.219
Oct 11 00:45:48 IQ138000 ntpd[1650]: Soliciting pool server 90.188.9.144
Oct 11 00:45:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:45:50 IQ138000 python3[1940]: Выполнение: mmcli -m wbc
Oct 11 00:45:50 IQ138000 python3[1940]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:45:50 IQ138000 python3[1940]:    --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:45:50 IQ138000 python3[1940]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:45:50 IQ138000 python3[1940]:            |                model: A7602E-H
Oct 11 00:45:50 IQ138000 python3[1940]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:45:50 IQ138000 python3[1940]:            |            supported: gsm-umts
Oct 11 00:45:50 IQ138000 python3[1940]:            |              current: gsm-umts
Oct 11 00:45:50 IQ138000 python3[1940]:            |         equipment id: 860803062234204
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   System   |               device: wbc
Oct 11 00:45:50 IQ138000 python3[1940]:            |              drivers: option, rndis_host
Oct 11 00:45:50 IQ138000 python3[1940]:            |               plugin: simtech
Oct 11 00:45:50 IQ138000 python3[1940]:            |         primary port: ttyUSB1
Oct 11 00:45:50 IQ138000 python3[1940]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:45:50 IQ138000 python3[1940]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:45:50 IQ138000 python3[1940]:            |                state: connected
Oct 11 00:45:50 IQ138000 python3[1940]:            |          power state: on
Oct 11 00:45:50 IQ138000 python3[1940]:            |          access tech: lte
Oct 11 00:45:50 IQ138000 python3[1940]:            |       signal quality: 90% (recent)
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:45:50 IQ138000 python3[1940]:            |              current: allowed: any; preferred: none
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   3GPP     |                 imei: 860803062234204
Oct 11 00:45:50 IQ138000 python3[1940]:            |          operator id: 25099
Oct 11 00:45:50 IQ138000 python3[1940]:            |        operator name: beeline
Oct 11 00:45:50 IQ138000 python3[1940]:            |         registration: home
Oct 11 00:45:50 IQ138000 python3[1940]:            | packet service state: attached
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:50 IQ138000 python3[1940]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:45:50 IQ138000 python3[1940]:            |                       slot 2: none
Oct 11 00:45:50 IQ138000 python3[1940]:   --------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:45:50 IQ138000 python3[1940]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:50 IQ138000 python3[1940]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:45:50 IQ138000 python3[1940]:    -------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:45:50 IQ138000 python3[1940]:   -------------------------------
Oct 11 00:45:50 IQ138000 python3[1940]:   Properties |            active: yes
Oct 11 00:45:50 IQ138000 python3[1940]:              |              imsi: 250997340491874
Oct 11 00:45:50 IQ138000 python3[1940]:              |             iccid: 8970199210429593744
Oct 11 00:45:50 IQ138000 python3[1940]:              |       operator id: 25099
Oct 11 00:45:50 IQ138000 python3[1940]:              |     operator name: Beeline
Oct 11 00:45:50 IQ138000 ntpd[1650]: Soliciting pool server 92.241.18.100
Oct 11 00:45:50 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 00:45:50 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:45:51 IQ138000 ntpd[1650]: Soliciting pool server 92.255.126.17
Oct 11 00:45:51 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:52 IQ138000 ntpd[1650]: Soliciting pool server 151.0.2.53
Oct 11 00:45:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 8 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:45:53 IQ138000 ntpd[1650]: Soliciting pool server 162.159.200.1
-- Boot ade74e75a0794c8c892d9bfaf3c6ee16 --
Oct 11 00:50:26 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 00:50:26 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 00:50:26 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 00:50:26 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 00:50:26 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 00:50:26 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 00:50:26 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 00:50:26 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 00:50:26 IQ138000 kernel: Zone ranges:
Oct 11 00:50:26 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 00:50:26 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 00:50:26 IQ138000 kernel: Movable zone start for each node
Oct 11 00:50:26 IQ138000 kernel: Early memory node ranges
Oct 11 00:50:26 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 00:50:26 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 00:50:26 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 00:50:26 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 00:50:26 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 00:50:26 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 00:50:26 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 00:50:26 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 00:50:26 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 00:50:26 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 00:50:26 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 00:50:26 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 00:50:26 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 00:50:26 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 00:50:26 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 00:50:26 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 00:50:26 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 00:50:26 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 00:50:26 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 00:50:26 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 00:50:26 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 00:50:26 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 00:50:26 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 00:50:26 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 00:50:26 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 00:50:26 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 00:50:26 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 00:50:26 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 00:50:26 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 00:50:26 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 00:50:26 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 00:50:26 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 00:50:26 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 00:50:26 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 00:50:26 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 00:50:26 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 00:50:26 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 00:50:26 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 00:50:26 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 00:50:26 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 00:50:26 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 00:50:26 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 00:50:26 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 00:50:26 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 00:50:26 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 00:50:26 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 00:50:26 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 00:50:26 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 00:50:26 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 00:50:26 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 00:50:26 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 00:50:26 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 00:50:26 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 00:50:26 IQ138000 kernel: devtmpfs: initialized
Oct 11 00:50:26 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 00:50:26 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 00:50:26 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 00:50:26 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 00:50:26 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 00:50:26 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 00:50:26 IQ138000 kernel: No ATAGs?
Oct 11 00:50:26 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 00:50:26 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 00:50:26 IQ138000 kernel: SCSI subsystem initialized
Oct 11 00:50:26 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 00:50:26 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 00:50:26 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 00:50:26 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 00:50:26 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 00:50:26 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 00:50:26 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 00:50:26 IQ138000 kernel: PTP clock support registered
Oct 11 00:50:26 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 00:50:26 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 00:50:26 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 00:50:26 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 00:50:26 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 00:50:26 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 00:50:26 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 00:50:26 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 00:50:26 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 00:50:26 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 00:50:26 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 00:50:26 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 00:50:26 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 00:50:26 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 00:50:26 IQ138000 kernel: Key type id_resolver registered
Oct 11 00:50:26 IQ138000 kernel: Key type id_legacy registered
Oct 11 00:50:26 IQ138000 kernel: Key type asymmetric registered
Oct 11 00:50:26 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 00:50:26 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 00:50:26 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 00:50:26 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 00:50:26 IQ138000 kernel: io scheduler kyber registered
Oct 11 00:50:26 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 00:50:26 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 00:50:26 IQ138000 kernel: brd: module loaded
Oct 11 00:50:26 IQ138000 kernel: loop: module loaded
Oct 11 00:50:26 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 00:50:26 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:50:26 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:50:26 IQ138000 kernel: CAN device driver interface
Oct 11 00:50:26 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 00:50:26 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 00:50:26 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 00:50:26 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 00:50:26 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 00:50:26 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 00:50:26 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 00:50:26 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 00:50:26 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 00:50:26 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 00:50:26 IQ138000 kernel: i2c /dev entries driver
Oct 11 00:50:26 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 00:50:26 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 00:50:26 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 00:50:26 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 00:50:26 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 00:50:26 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 00:50:26 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 00:50:26 IQ138000 kernel: Segment Routing with IPv6
Oct 11 00:50:26 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 00:50:26 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 00:50:26 IQ138000 kernel: can: controller area network core
Oct 11 00:50:26 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 00:50:26 IQ138000 kernel: can: raw protocol
Oct 11 00:50:26 IQ138000 kernel: can: broadcast manager protocol
Oct 11 00:50:26 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 00:50:26 IQ138000 kernel: can: SAE J1939
Oct 11 00:50:26 IQ138000 kernel: Key type dns_resolver registered
Oct 11 00:50:26 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 00:50:26 IQ138000 kernel: registered taskstats version 1
Oct 11 00:50:26 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 00:50:26 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 00:50:26 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 00:50:26 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:50:26 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 00:50:26 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 00:50:26 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 00:50:26 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 00:50:26 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T00:50:22 UTC (1760143822)
Oct 11 00:50:26 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 00:50:26 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:50:26 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 00:50:26 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 00:50:26 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 00:50:26 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 00:50:26 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 00:50:26 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 00:50:26 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 00:50:26 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 00:50:26 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 00:50:26 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 00:50:26 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 00:50:26 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 00:50:26 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: random: fast init done
Oct 11 00:50:26 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 00:50:26 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 00:50:26 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 00:50:26 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 00:50:26 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 00:50:26 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 00:50:26 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 00:50:26 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 00:50:26 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 00:50:26 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:50:26 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 00:50:26 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 00:50:26 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 00:50:26 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 00:50:26 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 00:50:26 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 00:50:26 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 00:50:26 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 00:50:26 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 00:50:26 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 00:50:26 IQ138000 kernel: libphy: stmmac: probed
Oct 11 00:50:26 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:50:26 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 00:50:26 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:50:26 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 00:50:26 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 00:50:26 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 00:50:26 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 00:50:26 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 00:50:26 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 00:50:26 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 00:50:26 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 00:50:26 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 00:50:26 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 00:50:26 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 00:50:26 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 00:50:26 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 00:50:26 IQ138000 kernel: of_cfs_init
Oct 11 00:50:26 IQ138000 kernel: of_cfs_init: OK
Oct 11 00:50:26 IQ138000 kernel: ALSA device list:
Oct 11 00:50:26 IQ138000 kernel:   No soundcards found.
Oct 11 00:50:26 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 00:50:26 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 00:50:26 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 00:50:26 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 00:50:26 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 00:50:26 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 00:50:26 IQ138000 kernel: devtmpfs: mounted
Oct 11 00:50:26 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 00:50:26 IQ138000 kernel: Run /sbin/init as init process
Oct 11 00:50:26 IQ138000 kernel:   with arguments:
Oct 11 00:50:26 IQ138000 kernel:     /sbin/init
Oct 11 00:50:26 IQ138000 kernel:   with environment:
Oct 11 00:50:26 IQ138000 kernel:     HOME=/
Oct 11 00:50:26 IQ138000 kernel:     TERM=linux
Oct 11 00:50:26 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 00:50:26 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 00:50:26 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 00:50:26 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 00:50:26 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 00:50:26 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:50:26 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 00:50:26 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:50:26 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 00:50:26 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 00:50:26 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 00:50:26 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 00:50:26 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 00:50:26 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 00:50:26 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 00:50:26 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 00:50:26 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 00:50:26 IQ138000 systemd[1]: Reached target Paths.
Oct 11 00:50:26 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 00:50:26 IQ138000 systemd[1]: Reached target Slices.
Oct 11 00:50:26 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 00:50:26 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 00:50:26 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 00:50:26 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 00:50:26 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 00:50:26 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 00:50:26 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 00:50:26 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 00:50:26 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 00:50:26 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 00:50:26 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 00:50:26 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 00:50:26 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 00:50:26 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 00:50:26 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 00:50:26 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 00:50:26 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 00:50:26 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 00:50:26 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 00:50:26 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 00:50:26 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 00:50:26 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 00:50:26 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 00:50:26 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 00:50:26 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 00:50:26 IQ138000 systemd-journald[138]: Journal started
Oct 11 00:50:26 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 00:50:26 IQ138000 systemd-fsck[141]: rootfs1: clean, 37039/131072 files, 278737/524288 blocks
Oct 11 00:50:26 IQ138000 systemd[1]: Started Journal Service.
Oct 11 00:50:26 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 00:50:26 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 00:50:26 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 00:50:26 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 00:50:26 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 00:50:26 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 00:50:26 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 00:50:27 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 00:50:27 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 00:50:27 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 00:50:27 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 00:50:27 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 00:50:27 IQ138000 systemd-random-seed[149]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 00:50:27 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 00:50:27 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 00:50:27 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 00:50:27 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 00:50:27 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 00:50:27 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 00:50:27 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 00:50:27 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 00:50:27 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 00:50:27 IQ138000 systemd-udevd[155]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 00:50:27 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 00:50:27 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 00:50:28 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 00:50:28 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 00:50:28 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 00:50:28 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 00:50:28 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 00:50:28 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 00:50:28 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 00:50:28 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 00:50:28 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 00:50:28 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 00:50:28 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 00:50:28 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 00:50:28 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 00:50:28 IQ138000 systemd-udevd[165]: eth1: Failed to query device driver: Device or resource busy
Oct 11 00:50:28 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 00:50:28 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 00:50:28 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 00:50:28 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 00:50:28 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 00:50:29 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 00:50:29 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 00:50:29 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 00:50:29 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 00:50:29 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 00:50:29 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 00:50:29 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 00:50:29 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 00:50:29 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 00:50:29 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 00:50:29 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 00:50:29 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 00:50:29 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 00:50:29 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 00:50:29 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 00:50:29 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 00:50:29 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 00:50:29 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 00:50:29 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 00:50:29 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:50:29 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 00:50:29 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:50:29 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 00:50:29 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 00:50:29 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 00:50:29 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 00:50:29 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 00:50:29 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 00:50:29 IQ138000 systemd[1]: Reached target Swap.
Oct 11 00:50:29 IQ138000 systemd-fsck[216]: data: clean, 16436/328656 files, 363643/1313536 blocks
Oct 11 00:50:29 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 00:50:29 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 00:50:29 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 00:50:29 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 00:50:29 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 00:50:29 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 00:50:30 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 00:50:30 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 00:50:30 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 00:50:30 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 50.255ms for 460 entries.
Oct 11 00:50:30 IQ138000 systemd-journald[138]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 470.4M, max 496.6M, 26.1M free.
Oct 11 00:50:30 IQ138000 kernel: random: crng init done
Oct 11 00:50:30 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 00:50:30 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 00:50:30 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 00:50:30 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 00:50:30 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 00:50:30 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 00:50:30 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 00:50:30 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 00:50:30 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 00:50:30 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 00:50:31 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 00:50:31 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 00:50:31 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 00:50:31 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 00:50:31 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 00:50:31 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 00:50:31 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 00:50:31 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 00:50:31 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 00:50:31 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 00:50:31 IQ138000 systemd[1]: Reached target Timers.
Oct 11 00:50:31 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 00:50:31 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 00:50:31 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 00:50:31 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 00:50:31 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 00:50:31 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 00:50:31 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 00:50:31 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 00:50:31 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 00:50:31 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 00:50:31 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 00:50:31 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 00:50:31 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 00:50:31 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 00:50:31 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 00:50:31 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 00:50:31 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 00:50:31 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 00:50:31 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 00:50:31 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 00:50:31 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 00:50:31 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 00:50:31 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 00:50:31 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 00:50:31 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 00:50:31 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 00:50:31 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 00:50:31 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 00:50:31 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 00:50:31 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 00:50:32 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 00:50:32 IQ138000 wb-watchdog[327]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 00:50:32 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:50:32 IQ138000 migrate.sh[325]: Error: No such file or directory
Oct 11 00:50:32 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 00:50:32 IQ138000 migrate.sh[337]: Error: No such file or directory
Oct 11 00:50:32 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 00:50:32 IQ138000 migrate.sh[344]: Error: No such file or directory
Oct 11 00:50:32 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:50:32 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 00:50:32 IQ138000 systemd[1]: Started watch config files.
Oct 11 00:50:32 IQ138000 reverse-ssh.sh[353]: Error: No such file or directory
Oct 11 00:50:32 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 00:50:32 IQ138000 migrate.sh[357]: Error: No such file or directory
Oct 11 00:50:32 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 00:50:32 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 00:50:32 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 00:50:32 IQ138000 rules-preprocessor[339]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 00:50:32 IQ138000 rules-preprocessor[339]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 00:50:32 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 00:50:32 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 00:50:32 IQ138000 migrate.sh[371]: Error: No such file or directory
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Successfully dropped root privileges.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: avahi-daemon 0.8 starting up.
Oct 11 00:50:32 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Successfully called chroot().
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Successfully dropped remaining capabilities.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: No service file found in /etc/avahi/services.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: New relevant interface lo.IPv6 for mDNS.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: New relevant interface lo.IPv4 for mDNS.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Network interface enumeration completed.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Registering new address record for ::1 on lo.*.
Oct 11 00:50:32 IQ138000 avahi-daemon[368]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 00:50:32 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:50:32 IQ138000 wb-watch-configs[389]: Watched dirs: /etc /etc/network
Oct 11 00:50:32 IQ138000 wpa_supplicant[380]: Successfully initialized wpa_supplicant
Oct 11 00:50:32 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 00:50:32 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 00:50:32 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 00:50:32 IQ138000 systemd-logind[350]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 00:50:32 IQ138000 systemd-logind[350]: New seat seat0.
Oct 11 00:50:32 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 00:50:32 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 00:50:32 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:32 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 00:50:32 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 00:50:32 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 00:50:32 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:32 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 00:50:32 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 00:50:32 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 00:50:32 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 00:50:32 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 00:50:32 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:32 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 00:50:32 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 00:50:32 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 00:50:32 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 00:50:33 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:50:33 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 00:50:33 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.1133] NetworkManager (version 1.42.4) is starting... (boot:ade74e75-a079-4c8c-892d-9bfaf3c6ee16)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.1137] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.1261] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 00:50:33 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 00:50:33 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 00:50:33 IQ138000 systemd[1]: Started Network Manager.
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.1778] manager[0x736900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 00:50:33 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 00:50:33 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 00:50:33 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 00:50:33 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 00:50:33 IQ138000 avahi-daemon[368]: Server startup complete. Host name is IQ138000.local. Local service cookie is 4263821124.
Oct 11 00:50:33 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 00:50:33 IQ138000 systemd[1]: Started User Login Management.
Oct 11 00:50:33 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 00:50:33 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 00:50:33 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 00:50:33 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 00:50:33 IQ138000 ModemManager[481]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 00:50:33 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 00:50:33 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.8862] hostname: hostname: using hostnamed
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.8865] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.8910] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.8983] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9000] manager[0x736900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9003] manager[0x736900]: rfkill: WWAN hardware radio set enabled
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9271] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9407] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9438] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9666] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9702] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9733] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9740] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9744] manager: Networking is enabled by state file
Oct 11 00:50:33 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9844] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9848] settings: Loaded settings plugin: keyfile (internal)
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9849] ifupdown: management mode: unmanaged
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9866] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 00:50:33 IQ138000 NetworkManager[405]: <info>  [1760143833.9869] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 00:50:33 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 00:50:34 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.0700] dhcp: init: Using DHCP client 'internal'
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.0739] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.0929] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.1023] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:50:34 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 00:50:34 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.1167] device (lo): Activation: starting connection 'lo' (91972590-6490-4248-8aa0-b7ea0816aa42)
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.1294] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.1365] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.4895] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.4979] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.5010] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.5037] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:34 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 00:50:34 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 00:50:34 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 00:50:34 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 00:50:34 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 00:50:34 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.7155] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.7201] device (wlan0): driver supports Access Point (AP) mode
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.7274] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 00:50:34 IQ138000 NetworkManager[405]: <info>  [1760143834.7321] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.5482] device (wlan1): driver supports Access Point (AP) mode
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.5524] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.5549] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6083] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6133] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6150] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6237] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6837] modem-manager: ModemManager available
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6852] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6874] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.6923] device (lo): Activation: successful, device activated.
Oct 11 00:50:35 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9445] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9464] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9494] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9519] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9616] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9633] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9669] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9705] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9759] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9819] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9856] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 00:50:35 IQ138000 NetworkManager[405]: <info>  [1760143835.9910] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:36 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 00:50:36 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 00:50:36 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 00:50:39 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:50:39 IQ138000 init.sh[1321]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 00:50:39 IQ138000 init.sh[1336]: In file included from -:16:
Oct 11 00:50:39 IQ138000 init.sh[1336]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:39 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:50:39 IQ138000 init.sh[1321]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 00:50:40 IQ138000 init.sh[1321]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 00:50:40 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 00:50:40 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:40 IQ138000 init.sh[1321]: ...
Oct 11 00:50:40 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 00:50:40 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:40 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 00:50:40 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 00:50:40 IQ138000 init.sh[1321]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 00:50:40 IQ138000 init.sh[1430]: In file included from -:24:
Oct 11 00:50:40 IQ138000 init.sh[1430]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:40 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 00:50:41 IQ138000 init.sh[1321]: ...
Oct 11 00:50:41 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 00:50:41 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:41 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 00:50:41 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 00:50:41 IQ138000 init.sh[1321]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 00:50:41 IQ138000 init.sh[1468]: In file included from -:11:
Oct 11 00:50:41 IQ138000 init.sh[1468]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:41 IQ138000 init.sh[1321]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 00:50:41 IQ138000 init.sh[1491]: In file included from -:11:
Oct 11 00:50:41 IQ138000 init.sh[1491]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 00:50:42 IQ138000 init.sh[1321]: ...
Oct 11 00:50:42 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 00:50:42 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 00:50:42 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 00:50:42 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 00:50:42 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 00:50:42 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 00:50:42 IQ138000 systemd[1]: Reached target Network.
Oct 11 00:50:42 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 00:50:42 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 00:50:42 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:50:42 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 00:50:42 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 00:50:42 IQ138000 lsyncd[1611]: 00:50:42 Normal: --- Startup ---
Oct 11 00:50:42 IQ138000 lsyncd[1611]: 00:50:42 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 00:50:42 IQ138000 lsyncd[1611]: iq_network_manager/iq_network_manager.log
Oct 11 00:50:42 IQ138000 lsyncd[1611]: messages
Oct 11 00:50:42 IQ138000 lsyncd[1611]: journal
Oct 11 00:50:42 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 00:50:42 IQ138000 knxd[1607]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:50:42 IQ138000 knxd[1607]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:50:42 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 00:50:42 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 00:50:42 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 00:50:42 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 00:50:42 IQ138000 ntpd[1623]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 00:50:42 IQ138000 ntpd[1623]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 00:50:42 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 00:50:42 IQ138000 ntpd[1623]: ntp-4 is maintained by Network Time Foundation,
Oct 11 00:50:42 IQ138000 ntpd[1623]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 00:50:42 IQ138000 ntpd[1623]: corporation.  Support and training for ntp-4 are
Oct 11 00:50:42 IQ138000 ntpd[1623]: available at https://www.nwtime.org/support
Oct 11 00:50:42 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 00:50:42 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 00:50:43 IQ138000 ntpd[1650]: proto: precision = 0.958 usec (-20)
Oct 11 00:50:43 IQ138000 lsyncd[1629]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 00:50:43 IQ138000 lsyncd[1624]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 00:50:43 IQ138000 lsyncd[1624]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 00:50:43 IQ138000 ntpd[1650]: basedate set to 2020-09-11
Oct 11 00:50:43 IQ138000 ntpd[1650]: gps base set to 2020-09-13 (week 2123)
Oct 11 00:50:43 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 00:50:43 IQ138000 lsyncd[1611]: 00:50:43 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 00:50:43 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 00:50:43 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 00:50:43 IQ138000 ntpd[1650]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 00:50:43 IQ138000 persist_meter_data.sh[1644]: Error: No such file or directory
Oct 11 00:50:43 IQ138000 ntpd[1650]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 00:50:43 IQ138000 ntpd[1650]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 00:50:43 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 00:50:43 IQ138000 ntpd[1650]: Listen normally on 3 lo [::1]:123
Oct 11 00:50:43 IQ138000 ntpd[1650]: Listening on routing socket on fd #20 for interface updates
Oct 11 00:50:43 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 00:50:43 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 00:50:43 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 00:50:43 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 00:50:43 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 00:50:43 IQ138000 NetworkManager[405]: <info>  [1760143843.2836] manager: startup complete
Oct 11 00:50:43 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:50:43 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 00:50:43 IQ138000 wb-mqtt-w1[1685]: MQTT broker localhost:1883
Oct 11 00:50:43 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:43 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 00:50:43 IQ138000 wb-mqtt-w1[1685]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 00:50:43 IQ138000 wb-mqtt-w1[1685]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 00:50:43 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:50:43 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 00:50:43 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 00:50:43 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 00:50:43 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 00:50:43 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 00:50:43 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 00:50:43 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 00:50:43 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:43 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:50:43 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 00:50:43 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 00:50:43 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 00:50:43 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:43 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 00:50:43 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 00:50:43 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 00:50:43 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 00:50:43 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 00:50:43 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 00:50:43 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 00:50:43 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 00:50:43 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 00:50:43 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 00:50:43 IQ138000 ntpd[1650]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:50:43 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 00:50:44 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 00:50:44 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 00:50:44 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:50:44 IQ138000 sshd[1742]: Server listening on 0.0.0.0 port 22.
Oct 11 00:50:44 IQ138000 sshd[1742]: Server listening on :: port 22.
Oct 11 00:50:44 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 00:50:44 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 00:50:44 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 00:50:44 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 00:50:44 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 00:50:44 IQ138000 wb-connection-manager[1508]: Connection LegacyWiFi not found, skipping
Oct 11 00:50:44 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 00:50:44 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 00:50:44 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:50:44 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 00:50:44 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 00:50:44 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 00:50:44 IQ138000 wpa_supplicant[380]: wlan0: Reject scan trigger since one is already pending
Oct 11 00:50:44 IQ138000 vnstatd[1653]: Info: vnStat daemon 2.6 started. (pid:1653 uid:110 gid:117 64-bit)
Oct 11 00:50:44 IQ138000 vnstatd[1653]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 00:50:44 IQ138000 vnstatd[1653]: Info: Interface "ppp0" disabled.
Oct 11 00:50:44 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 00:50:44 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 00:50:44 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 00:50:44 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 00:50:44 IQ138000 reverse-ssh.sh[1864]: Error: No such file or directory
Oct 11 00:50:44 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 00:50:44 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:44 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 00:50:44 IQ138000 ntpd[1650]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:50:44 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:44 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 00:50:45 IQ138000 wb-adjust-systime[1845]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 00:50:45 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 00:50:45 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 00:50:45 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Warning: Error resolving bridge address: Name or service not known.
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 00:50:45 IQ138000 mosquitto[1889]: 1760143845: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 00:50:45 IQ138000 wb-adjust-systime[1845]: Drift file is valid (was recently edited)
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <error> [1760143845.2740] audit: failed to open auditd socket: Protocol not supported
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.2743] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1508 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 00:50:45 IQ138000 wb-connection-manager[1508]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 00:50:45 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 00:50:45 IQ138000 knxd[1917]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:50:45 IQ138000 knxd[1917]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:50:45 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:50:45 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 00:50:45 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 00:50:45 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:45 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:50:45 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 00:50:45 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 00:50:45 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 00:50:45 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.8831] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.8838] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1508 uid=0 result="success"
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.8845] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:45 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.8991] manager: NetworkManager state is now CONNECTING
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.9433] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.9704] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 00:50:45 IQ138000 NetworkManager[405]: <info>  [1760143845.9720] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:45 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 00:50:45 IQ138000 ntpd[1650]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: MQTT broker localhost:1883
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: Config file /etc/wb-mqtt-db.conf
Oct 11 00:50:46 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.0817] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1043] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:50:46 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1197] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1400] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1441] Config: added 'scan_ssid' value '1'
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1498] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1517] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.1530] Config: added 'psk' value '<hidden>'
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: INFO: [sqlite] Creating tables if necessary
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: INFO: [sqlite] Create indices if necessary
Oct 11 00:50:46 IQ138000 wb-mqtt-db[2013]: INFO: [sqlite] Analyzing data table
Oct 11 00:50:46 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 00:50:46 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 00:50:46 IQ138000 wb-mqtt-logs[2052]: MQTT broker localhost:1883
Oct 11 00:50:46 IQ138000 wb-mqtt-logs[2052]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:46 IQ138000 wb-mqtt-logs[2052]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:46 IQ138000 wb-mqtt-knx[2036]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:46 IQ138000 wb-mqtt-knx[2036]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:46 IQ138000 systemd[1]: Started metrics sender.
Oct 11 00:50:46 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.5678] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 00:50:46 IQ138000 NetworkManager[405]: <info>  [1760143846.5680] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 00:50:46 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 00:50:46 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 00:50:46 IQ138000 ntpd[1650]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 00:50:47 IQ138000 wb-mqtt-confed[2008]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 00:50:47 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:47 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.669s CPU time.
Oct 11 00:50:47 IQ138000 wb-mqtt-confed[2008]: INFO: [wbgo_mqtt] confed-IQ138000-2008: MQTT connection established
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2086]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 00:50:47 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [gpio driver] Started
Oct 11 00:50:47 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 00:50:47 IQ138000 wb-mqtt-gpio[1861]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 00:50:47 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 00:50:47 IQ138000 wb-mqtt-opcua[2199]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 00:50:47 IQ138000 wb-mqtt-mbgate[2059]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 00:50:47 IQ138000 wb-mqtt-logs[2052]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:47 IQ138000 wb-mqtt-logs[2052]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:47 IQ138000 wb-mqtt-logs[2052]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:47 IQ138000 wb-mqtt-logs[2052]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 00:50:47 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:47 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:47 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2024]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:50:48 IQ138000 wb-mqtt-opcua[2199]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 00:50:48 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 00:50:48 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 00:50:48 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 00:50:48 IQ138000 wb-mqtt-iec104[2288]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 00:50:48 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:50:48 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 00:50:48 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 00:50:49 IQ138000 wb-mqtt-knx[2036]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:49 IQ138000 wb-mqtt-knx[2036]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:49 IQ138000 wb-mqtt-knx[2036]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:49 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 00:50:49 IQ138000 wb-mqtt-knx[2036]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:50:49 IQ138000 wb-mqtt-knx[2036]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 00:50:49 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 00:50:49 IQ138000 wb-mqtt-iec104[2288]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 00:50:49 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 00:50:49 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 00:50:51 IQ138000 python3[1986]: No data file found at /tmp/network_status_cache.json
Oct 11 00:50:51 IQ138000 python3[1986]: Connecting to MQTT
Oct 11 00:50:51 IQ138000 NetworkManager[405]: <info>  [1760143851.0927] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 00:50:51 IQ138000 NetworkManager[405]: <info>  [1760143851.0930] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 00:50:51 IQ138000 python3[1986]: Connected to MQTT
Oct 11 00:50:51 IQ138000 python3[1986]: Connection returned result: Connection Accepted.
Oct 11 00:50:53 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2083 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 00:50:53 IQ138000 wb-device-manager[1994]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 00:50:53 IQ138000 wb-device-manager[1994]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New virtual device lo 91972590-6490-4248-8aa0-b7ea0816aa42 /org/freedesktop/NetworkManager/Settings/7
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 00:50:53 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:53 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:53 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New active connection lo 91972590-6490-4248-8aa0-b7ea0816aa42 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 00:50:54 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 00:50:54 IQ138000 kernel: dc5ldo: disabling
Oct 11 00:50:54 IQ138000 kernel: dldo4: disabling
Oct 11 00:50:55 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 00:50:55 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 00:50:55 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 00:50:55 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 00:50:55 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:50:55 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:50:55 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:50:55 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 00:50:55 IQ138000 knxd[3155]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:50:55 IQ138000 knxd[3155]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:50:55 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:50:55 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:50:55 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: MQTT broker localhost:1883
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] ADC worker thread is started
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 00:50:55 IQ138000 wb-mqtt-adc[3166]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 00:50:56 IQ138000 wb-mqtt-confed[2008]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 00:50:56 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-db[2013]: INFO: [sqlite] DB initialization is done
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 00:50:57 IQ138000 wb-gsm[3368]: main: Called from pid 1 (systemd)
Oct 11 00:50:57 IQ138000 wb-gsm[3411]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:50:58 IQ138000 wb-usb-otg-start.sh[3481]: : wb-usb-otg-start
Oct 11 00:50:58 IQ138000 wb-usb-otg-start.sh[3481]: main: setup_device()
Oct 11 00:50:58 IQ138000 wb-gsm[3493]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:50:58 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 00:50:58 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 00:50:58 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 00:50:58 IQ138000 kernel: using random self ethernet address
Oct 11 00:50:58 IQ138000 kernel: using random host ethernet address
Oct 11 00:50:58 IQ138000 wb-usb-otg-start.sh[3481]: main: enabling profile rndis
Oct 11 00:50:58 IQ138000 wb-gsm[3541]: should_enable: Should enable GSM modem
Oct 11 00:50:58 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 00:50:58 IQ138000 systemd-udevd[3495]: Using default interface naming scheme 'v247'.
Oct 11 00:50:58 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 00:50:58 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 00:50:58 IQ138000 NetworkManager[405]: <info>  [1760143858.7038] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 00:50:58 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 00:50:58 IQ138000 NetworkManager[405]: <info>  [1760143858.9215] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 00:50:58 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 00:50:59 IQ138000 wb-gsm[3630]: main: Called from pid 3547 (wb-gsm-mm)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 00:50:59 IQ138000 NetworkManager[405]: <info>  [1760143859.8328] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 00:50:59 IQ138000 NetworkManager[405]: <info>  [1760143859.8330] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 00:50:59 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 00:50:59 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 00:51:00 IQ138000 wb-gsm[3641]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 00:51:00 IQ138000 wb-gsm[3665]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 00:51:00 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 00:51:01 IQ138000 python3[1986]: Выполнение: service wb-connection-manager stop
Oct 11 00:51:01 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: DB logger started, go to main loop
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 00:51:01 IQ138000 npm[1695]: > zigbee2mqtt@2.1.1 start
Oct 11 00:51:01 IQ138000 npm[1695]: > node index.js
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 00:51:01 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 00:51:02 IQ138000 wb-mqtt-db[2013]: INFO: [mqtt] subscription succeeded (message id 459)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:51:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 00:51:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:51:04 IQ138000 npm[3797]: Starting Zigbee2MQTT without watchdog.
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:04 IQ138000 wb-gsm[4051]: mm_off: Modem is already OFF
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:05 IQ138000 wb-gsm[4120]: main: Called from pid 3547 (wb-gsm-mm)
Oct 11 00:51:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 00:51:05 IQ138000 wb-gsm[4132]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 00:51:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:05 IQ138000 wb-gsm[4155]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 00:51:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 00:51:06 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 00:51:06 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 00:51:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 00:51:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 00:51:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 00:51:07 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 00:51:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:09 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 00:51:09 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:09 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 00:51:09 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:09 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:09 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:09 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 00:51:09 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:51:09 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 00:51:09 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 00:51:09 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:51:09 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 00:51:09 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:51:09 IQ138000 knxd[4517]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:51:09 IQ138000 knxd[4517]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: MQTT broker localhost:1883
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: w1 thread Started
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 00:51:09 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 00:51:09 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:51:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:09 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 00:51:09 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:51:09 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:51:09 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 00:51:09 IQ138000 systemd[1]: Started User command handler service.
Oct 11 00:51:09 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 00:51:09 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 00:51:09 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 00:51:09 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 00:51:09 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.179s CPU time.
Oct 11 00:51:09 IQ138000 python3[1986]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 00:51:09 IQ138000 python3[1986]:  
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <warn>  [1760143871.5279] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <info>  [1760143871.5281] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <info>  [1760143871.5301] manager: NetworkManager state is now DISCONNECTED
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <warn>  [1760143871.5319] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <info>  [1760143871.5331] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:11 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:51:11 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <info>  [1760143871.5683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 00:51:11 IQ138000 NetworkManager[405]: <info>  [1760143871.5686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:11 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:51:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:51:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:51:12 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 00:51:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:12 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 00:51:14 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:14 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 00:51:14 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 00:51:14 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 00:51:14 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 00:51:14 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 00:51:14 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 00:51:14 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 00:51:14 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 00:51:14 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 00:51:14 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 00:51:14 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 00:51:14 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 00:51:14 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 00:51:14 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 00:51:14 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 00:51:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:14 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 00:51:14 IQ138000 systemd[1]: Started User command handler service.
Oct 11 00:51:14 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 00:51:14 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 00:51:14 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 00:51:14 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 00:51:14 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 00:51:14 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 00:51:14 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 00:51:14 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 00:51:14 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 00:51:14 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 00:51:14 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 00:51:14 IQ138000 watchdog[4627]:  no test binary files
Oct 11 00:51:14 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 00:51:14 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 00:51:14 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 00:51:14 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 00:51:14 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 00:51:14 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 00:51:14 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 00:51:14 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 00:51:14 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 00:51:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:51:14 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 00:51:14 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 00:51:14 IQ138000 systemd[1]: Startup finished in 3.824s (kernel) + 50.203s (userspace) = 54.027s.
Oct 11 00:51:14 IQ138000 wb-rules[4613]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 00:51:14 IQ138000 wb-rules[4613]: INFO: driver is created
Oct 11 00:51:14 IQ138000 wb-rules[4613]: INFO: [wbgo_mqtt] rules-IQ138000-4613: MQTT connection established
Oct 11 00:51:14 IQ138000 wb-rules[4613]: INFO: driver loop is started
Oct 11 00:51:14 IQ138000 wb-rules[4613]: INFO: wait for driver to become ready
Oct 11 00:51:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:14 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:51:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:15 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:16 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 6 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:16 IQ138000 wb-rules[4613]: INFO: driver is ready
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:16 IQ138000 wb-rules[4613]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 00:51:16 IQ138000 wb-rules[4613]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4613: MQTT connection established
Oct 11 00:51:16 IQ138000 wb-rules[4613]: INFO: [engine] Starting main loop
Oct 11 00:51:16 IQ138000 wb-rules[4613]: INFO: the engine is ready
Oct 11 00:51:16 IQ138000 wb-rules[4613]: INFO: [engine] Starting sync loop
Oct 11 00:51:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:17 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 6 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:18 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 00:51:18 IQ138000 wb-rules[4613]: WARNING: [rule warning] DAC: no config file
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:18 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:18 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:18 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:51:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:19 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 00:51:19 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 00:51:19 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 66:17:27:cc:b6:66
Oct 11 00:51:19 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 00:51:19 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 00:51:19 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 00:51:19 IQ138000 NetworkManager[405]: <info>  [1760143879.1621] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 00:51:19 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 00:51:19 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 00:51:19 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 00:51:19 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 00:51:19 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 00:51:19 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 00:51:19 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 00:51:19 IQ138000 systemd-udevd[4971]: Using default interface naming scheme 'v247'.
Oct 11 00:51:19 IQ138000 systemd-udevd[4971]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 00:51:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:19 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:19 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 00:51:19 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:51:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:51:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 00:51:20 IQ138000 knxd[5004]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:51:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:51:20 IQ138000 knxd[5004]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:51:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:51:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:20 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:20 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-rules[4613]: INFO: all rule files are loaded
Oct 11 00:51:21 IQ138000 python3[1986]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:21 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:22 IQ138000 wb-gsm[5033]: mm_on: Waiting for modem to start
Oct 11 00:51:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 00:51:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:23 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 00:51:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 00:51:24 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:24 IQ138000 npm[3797]: [2025-10-11 00:51:24] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 00:51:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:24 IQ138000 npm[3797]: [2025-10-11 00:51:24] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 00:51:24 IQ138000 npm[3797]: [2025-10-11 00:51:24] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 00:51:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 6 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:25 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 6 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 00:51:25 IQ138000 npm[3797]: [2025-10-11 00:51:25] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 00:51:25 IQ138000 npm[3797]: [2025-10-11 00:51:25] info:         zh:zstack:znp: Serialport opened
Oct 11 00:51:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 00:51:26 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 00:51:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:27 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 03:51:28.252+00:00
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T03:51:28.252Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144068264,"cmd_timestamp_ms":1760143888264,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144068264,"cmd_timestamp_ms":1760143888264,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 00:51:28 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 00:51:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 00:51:28 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 03:51:28.502+00:00
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T03:51:28.502Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144068534,"cmd_timestamp_ms":1760143888534,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144068534,"cmd_timestamp_ms":1760143888534,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 03:51:28.638+00:00
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T03:51:28.638Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144068654,"cmd_timestamp_ms":1760143888654,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144068654,"cmd_timestamp_ms":1760143888654,"source":"schedule"}
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: Currently 4 devices are joined.
Oct 11 00:51:28 IQ138000 npm[3797]: [2025-10-11 00:51:28] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 03:51:28.778+00:00
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T03:51:28.778Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144068791,"cmd_timestamp_ms":1760143888791,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144068791,"cmd_timestamp_ms":1760143888791,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 03:51:28.889+00:00
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T03:51:28.889Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144068907,"cmd_timestamp_ms":1760143888907,"source":"schedule"}
Oct 11 00:51:28 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144068907,"cmd_timestamp_ms":1760143888907,"source":"schedule"}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 03:51:29.024+00:00
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T03:51:29.024Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144069036,"cmd_timestamp_ms":1760143889036,"source":"schedule"}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144069036,"cmd_timestamp_ms":1760143889036,"source":"schedule"}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 03:51:29.238+00:00
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T03:51:29.238Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144069252,"cmd_timestamp_ms":1760143889252,"source":"schedule"}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144069252,"cmd_timestamp_ms":1760143889252,"source":"schedule"}
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m: Connected to MQTT server
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 00:51:29 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 03:51:29.539+00:00
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T03:51:29.539Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144069551,"cmd_timestamp_ms":1760143889551,"source":"schedule"}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144069551,"cmd_timestamp_ms":1760143889551,"source":"schedule"}
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 00:51:29 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:51:29 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:51:29 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:51:29 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m: Started frontend on port 8282
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 00:51:29 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 00:51:29 IQ138000 npm[3797]: [2025-10-11 00:51:29] info:         z2m: Zigbee2MQTT started!
Oct 11 00:51:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 03:51:30.082+00:00
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T03:51:30.082Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144070106,"cmd_timestamp_ms":1760143890106,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144070106,"cmd_timestamp_ms":1760143890106,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 00:51:30 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 00:51:30 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:51:30 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 03:51:30.216+00:00
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 00:51:30 IQ138000 knxd[5193]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:51:30 IQ138000 knxd[5193]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:51:30 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T03:51:30.216Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144070229,"cmd_timestamp_ms":1760143890229,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144070229,"cmd_timestamp_ms":1760143890229,"source":"schedule"}
Oct 11 00:51:30 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:51:30 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 03:51:30.412+00:00
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T03:51:30.412Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144070425,"cmd_timestamp_ms":1760143890425,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144070425,"cmd_timestamp_ms":1760143890425,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 03:51:30.553+00:00
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T03:51:30.553Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144070571,"cmd_timestamp_ms":1760143890571,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144070571,"cmd_timestamp_ms":1760143890571,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 00:51:30 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 03:51:30.754+00:00
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T03:51:30.754Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144070766,"cmd_timestamp_ms":1760143890766,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144070766,"cmd_timestamp_ms":1760143890766,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 03:51:30.925+00:00
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T03:51:30.925Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144070934,"cmd_timestamp_ms":1760143890934,"source":"schedule"}
Oct 11 00:51:30 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144070934,"cmd_timestamp_ms":1760143890934,"source":"schedule"}
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 03:51:31.131+00:00
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T03:51:31.131Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144071145,"cmd_timestamp_ms":1760143891145,"source":"schedule"}
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144071145,"cmd_timestamp_ms":1760143891145,"source":"schedule"}
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 00:51:31 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 00:51:32 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 00:51:32 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 00:51:32 IQ138000 wb-watchdog[5266]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 00:51:32 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:32 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:32 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 00:51:32 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 00:51:32 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 00:51:33 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:34 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:35 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:36 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 00:51:38 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:39 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:39 IQ138000 ModemManager[481]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 00:51:39 IQ138000 ModemManager[481]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 00:51:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:40 IQ138000 ModemManager[481]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 00:51:40 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:40 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 00:51:40 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 00:51:40 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:51:40 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:51:40 IQ138000 knxd[5382]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 00:51:40 IQ138000 knxd[5382]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 00:51:40 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:51:40 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 00:51:40 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 00:51:40 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 00:51:41 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 00:51:41 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 00:51:41 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 00:51:41 IQ138000 python3[1986]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 00:51:41 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 00:51:41 IQ138000 ModemManager[481]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7542] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7564] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7582] device (ttyUSB1): modem state 'enabling'
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7628] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7664] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7742] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7751] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:41 IQ138000 NetworkManager[405]: <info>  [1760143901.7776] manager: NetworkManager state is now CONNECTING
Oct 11 00:51:41 IQ138000 ModemManager[481]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 00:51:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:41 IQ138000 wb-mqtt-nm-helper[2083]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 00:51:41 IQ138000 ModemManager[481]: <info>  [modem0] power state updated: on
Oct 11 00:51:42 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:51:42 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:51:42 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:51:42 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:51:42 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:51:42 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:51:42 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:51:42 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:51:42 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:51:42 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:51:42 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:51:42 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:51:42 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:51:42 IQ138000 python3[1986]:            |                state: enabling
Oct 11 00:51:42 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:51:42 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:51:42 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:42 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:42 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:51:42 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:51:42 IQ138000 python3[1986]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 00:51:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:42 IQ138000 python3[1986]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 00:51:42 IQ138000 python3[1986]:  successfully requested primary SIM switch in modem
Oct 11 00:51:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:43 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 00:51:43 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 00:51:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:43 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 00:51:43 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 00:51:43 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 00:51:43 IQ138000 lsyncd[5430]: 00:51:43 Normal: --- Startup ---
Oct 11 00:51:43 IQ138000 lsyncd[5430]: 00:51:43 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 00:51:43 IQ138000 lsyncd[5430]: iq_network_manager/iq_network_manager.log
Oct 11 00:51:43 IQ138000 lsyncd[5430]: messages
Oct 11 00:51:43 IQ138000 lsyncd[5430]: journal
Oct 11 00:51:44 IQ138000 lsyncd[5432]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 00:51:44 IQ138000 lsyncd[5431]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 00:51:44 IQ138000 lsyncd[5431]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 00:51:44 IQ138000 lsyncd[5430]: 00:51:44 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 00:51:44 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 00:51:44 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 00:51:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 00:51:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 00:51:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 00:51:45 IQ138000 ModemManager[481]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 00:51:45 IQ138000 ModemManager[481]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 00:51:45 IQ138000 ModemManager[481]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 00:51:45 IQ138000 ModemManager[481]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] simple connect started...
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (6/10): register
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.2791] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.2826] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.2900] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.2947] ppp-manager: starting PPP connection
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.3092] ppp-manager: pppd started with pid 5450
Oct 11 00:51:46 IQ138000 pppd[5450]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: initializing
Oct 11 00:51:46 IQ138000 pppd[5450]: pppd 2.4.9 started by root, uid 0
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 00:51:46 IQ138000 pppd[5450]: Using interface ppp0
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: Using interface ppp0
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 00:51:46 IQ138000 pppd[5450]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.3790] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 00:51:46 IQ138000 pppd[5450]: PAP authentication succeeded
Oct 11 00:51:46 IQ138000 pppd[5450]: kernel does not support PPP filtering
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: PAP authentication succeeded
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: kernel does not support PPP filtering
Oct 11 00:51:46 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 00:51:46 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 00:51:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:46 IQ138000 ModemManager[481]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 00:51:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:46 IQ138000 pppd[5450]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 00:51:46 IQ138000 pppd[5450]: local  IP address 10.105.51.31
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: local  IP address 10.105.51.31
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: remote IP address 10.64.64.64
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: primary   DNS address 172.23.10.130
Oct 11 00:51:46 IQ138000 NetworkManager[5450]: secondary DNS address 172.23.10.131
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 00:51:46 IQ138000 pppd[5450]: remote IP address 10.64.64.64
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.9694] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 00:51:46 IQ138000 pppd[5450]: primary   DNS address 172.23.10.130
Oct 11 00:51:46 IQ138000 pppd[5450]: secondary DNS address 172.23.10.131
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.9737] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: ip-up event
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.9835] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:46 IQ138000 pppd[5450]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.9894] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.9913] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 00:51:46 IQ138000 NetworkManager[405]: <info>  [1760143906.9963] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 00:51:46 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:51:47 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 00:51:47 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 00:51:47 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 00:51:47 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 00:51:47 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 00:51:47 IQ138000 NetworkManager[405]: <info>  [1760143907.0865] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:47 IQ138000 NetworkManager[405]: <info>  [1760143907.0880] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 00:51:47 IQ138000 NetworkManager[405]: <info>  [1760143907.0900] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 00:51:47 IQ138000 NetworkManager[405]: <info>  [1760143907.0921] device (ttyUSB1): Activation: successful, device activated.
Oct 11 00:51:47 IQ138000 NetworkManager[405]: <info>  [1760143907.0952] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 00:51:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:48 IQ138000 ntpd[1650]: Listen normally on 4 ppp0 10.105.51.31:123
Oct 11 00:51:48 IQ138000 ntpd[1650]: new interface(s) found: waking up resolver
Oct 11 00:51:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 00:51:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:50 IQ138000 ntpd[1650]: Soliciting pool server 91.206.16.3
Oct 11 00:51:50 IQ138000 ntpd[1650]: Soliciting pool server 51.250.53.172
Oct 11 00:51:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:50 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 00:51:50 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 00:51:50 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 00:51:50 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 00:51:50 IQ138000 wb-mqtt-knx[2036]: INFO: knxd connected successfully
Oct 11 00:51:50 IQ138000 vnstatd[1653]: Info: Interface "ppp0" enabled.
Oct 11 00:51:50 IQ138000 ntpd[1650]: Soliciting pool server 185.209.85.222
Oct 11 00:51:50 IQ138000 ntpd[1650]: Soliciting pool server 195.133.5.5
Oct 11 00:51:51 IQ138000 ntpd[1650]: Soliciting pool server 82.146.53.58
Oct 11 00:51:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:51 IQ138000 ntpd[1650]: Soliciting pool server 151.0.2.53
Oct 11 00:51:51 IQ138000 ntpd[1650]: Soliciting pool server 195.39.248.4
Oct 11 00:51:51 IQ138000 ntpd[1650]: Soliciting pool server 89.111.154.54
Oct 11 00:51:52 IQ138000 python3[1986]: Выполнение: mmcli -i any
Oct 11 00:51:52 IQ138000 python3[1986]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 00:51:52 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:52 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:51:52 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:51:52 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:51:52 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:51:52 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:51:52 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:51:52 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:51:52 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:51:52 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:51:52 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:51:52 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:51:52 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:51:52 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:51:52 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:51:52 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:51:52 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:51:52 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:51:52 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:51:52 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:51:52 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:51:52 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:51:52 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:51:52 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:51:52 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:51:52 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:51:52 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:51:52 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:51:52 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:52 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:51:52 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:51:52 IQ138000 python3[1986]: Current state: home
Oct 11 00:51:52 IQ138000 python3[1986]: SIM registered in the network.
Oct 11 00:51:52 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:51:52 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:51:52 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:51:52 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:51:52 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:51:52 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:51:52 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:51:52 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:51:52 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:51:52 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:51:52 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:51:52 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:51:52 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:51:52 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:51:52 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:51:52 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:51:52 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:51:52 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:51:52 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:51:52 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:51:52 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:51:52 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:51:52 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:52 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:51:52 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:51:52 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:51:52 IQ138000 python3[1986]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:52 IQ138000 python3[1986]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:51:52 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:52 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:51:52 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:51:52 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:51:52 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:51:52 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:51:52 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:51:52 IQ138000 ntpd[1650]: Soliciting pool server 176.215.15.21
Oct 11 00:51:52 IQ138000 ntpd[1650]: Soliciting pool server 162.159.200.1
Oct 11 00:51:52 IQ138000 ntpd[1650]: Soliciting pool server 185.211.244.47
Oct 11 00:51:53 IQ138000 ntpd[1650]: Soliciting pool server 51.250.110.169
Oct 11 00:51:53 IQ138000 ntpd[1650]: Soliciting pool server 91.197.207.24
Oct 11 00:51:53 IQ138000 ntpd[1650]: Soliciting pool server 2a0d:8480:0:672::123
Oct 11 00:51:53 IQ138000 ntpd[1650]: Soliciting pool server 188.225.9.167
Oct 11 00:51:54 IQ138000 ntpd[1650]: Soliciting pool server 193.106.93.116
Oct 11 00:51:55 IQ138000 ntpd[1650]: Soliciting pool server 46.188.16.150
Oct 11 00:51:55 IQ138000 ntpd[1650]: Soliciting pool server 83.243.68.157
Oct 11 00:51:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 17 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 00:51:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:51:57 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:51:57 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:51:57 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:51:57 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:51:57 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:51:57 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:51:57 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:51:57 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:51:57 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:51:57 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:51:57 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:51:57 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:51:57 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:51:57 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:51:57 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:51:57 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:51:57 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:51:57 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:51:57 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:51:57 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:51:57 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:51:57 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:51:57 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:51:57 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:57 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:51:58 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:51:58 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:51:58 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:51:58 IQ138000 python3[1986]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:57 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec9428ad.fbd95354 does not match aorg 0000000000.00000000 from server@46.188.16.150 xmt 0xec9428ad.10a2b9d3
Oct 11 00:51:57 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec9428ad.fbe40ef6 does not match aorg 0000000000.00000000 from server@51.250.110.169 xmt 0xec9428ad.114285be
Oct 11 00:51:57 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec9428ad.fbe8881b does not match aorg 0000000000.00000000 from server@176.215.15.21 xmt 0xec9428ad.140895d0
Oct 11 00:51:57 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec9428ad.fbeff612 does not match aorg 0000000000.00000000 from server@195.39.248.4 xmt 0xec9428ad.131e8ad1
Oct 11 00:51:57 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec9428ad.fbdf336f does not match aorg 0000000000.00000000 from server@162.159.200.1 xmt 0xec9428ad.1657f0a8
Oct 11 00:51:57 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec9428ad.fbcb91d0 does not match aorg 0000000000.00000000 from server@83.243.68.157 xmt 0xec9428ad.118f5c3e
Oct 11 00:51:57 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 00:51:57 IQ138000 python3[1986]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:51:57 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:51:57 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:51:57 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:51:57 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:51:57 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:51:57 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:51:57 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:51:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:51:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:51:59 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:00 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 17 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:02 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:52:02 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:52:02 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:52:02 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:52:02 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:52:02 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:52:02 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:52:02 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:52:02 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:52:02 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:52:02 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:52:02 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:52:02 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:52:02 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:52:02 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:52:02 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:52:02 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:52:02 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:52:02 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:52:02 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:52:02 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:52:02 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:52:02 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:02 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:52:02 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:52:02 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:52:02 IQ138000 python3[1986]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:02 IQ138000 python3[1986]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:52:02 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:02 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:52:02 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:52:02 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:52:02 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:52:02 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:52:02 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:52:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:52:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:52:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 00:52:07 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:52:07 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:52:07 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:52:07 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:52:07 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:52:07 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:52:07 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:52:07 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:52:07 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:52:07 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:52:07 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:52:07 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:52:07 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:52:07 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:52:07 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:52:07 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:52:07 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:52:07 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:52:07 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:52:07 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:52:07 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:52:07 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:52:07 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:07 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:52:07 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:52:07 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:52:07 IQ138000 python3[1986]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:07 IQ138000 python3[1986]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:52:07 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:07 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:52:07 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:52:07 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:52:07 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:52:07 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:52:07 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:52:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:52:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:52:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:52:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 00:52:12 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:52:12 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:52:12 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:52:12 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:52:12 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:52:12 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:52:12 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:52:12 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:52:12 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:52:12 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:52:12 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:52:12 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:52:12 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:52:12 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:52:12 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:52:12 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:52:12 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:52:12 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:52:12 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:52:12 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:52:12 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:52:12 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:52:12 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:12 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:52:12 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:52:12 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:52:12 IQ138000 python3[1986]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:12 IQ138000 python3[1986]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:52:12 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:12 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:52:12 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:52:12 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:52:12 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:52:12 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:52:12 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:52:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:52:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 00:52:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:52:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 00:52:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 00:52:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:52:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:17 IQ138000 python3[1986]: Выполнение: mmcli -m wbc
Oct 11 00:52:17 IQ138000 python3[1986]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 00:52:17 IQ138000 python3[1986]:    --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 00:52:17 IQ138000 python3[1986]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   Hardware |         manufacturer: INCORPORATED
Oct 11 00:52:17 IQ138000 python3[1986]:            |                model: A7602E-H
Oct 11 00:52:17 IQ138000 python3[1986]:            |    firmware revision: A50C4B08A7600M7
Oct 11 00:52:17 IQ138000 python3[1986]:            |            supported: gsm-umts
Oct 11 00:52:17 IQ138000 python3[1986]:            |              current: gsm-umts
Oct 11 00:52:17 IQ138000 python3[1986]:            |         equipment id: 860803062234204
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   System   |               device: wbc
Oct 11 00:52:17 IQ138000 python3[1986]:            |              drivers: option, rndis_host
Oct 11 00:52:17 IQ138000 python3[1986]:            |               plugin: simtech
Oct 11 00:52:17 IQ138000 python3[1986]:            |         primary port: ttyUSB1
Oct 11 00:52:17 IQ138000 python3[1986]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 00:52:17 IQ138000 python3[1986]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 00:52:17 IQ138000 python3[1986]:            |                state: connected
Oct 11 00:52:17 IQ138000 python3[1986]:            |          power state: on
Oct 11 00:52:17 IQ138000 python3[1986]:            |          access tech: lte
Oct 11 00:52:17 IQ138000 python3[1986]:            |       signal quality: 90% (recent)
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 00:52:17 IQ138000 python3[1986]:            |              current: allowed: any; preferred: none
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   3GPP     |                 imei: 860803062234204
Oct 11 00:52:17 IQ138000 python3[1986]:            |          operator id: 25099
Oct 11 00:52:17 IQ138000 python3[1986]:            |        operator name: beeline
Oct 11 00:52:17 IQ138000 python3[1986]:            |         registration: home
Oct 11 00:52:17 IQ138000 python3[1986]:            | packet service state: attached
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:17 IQ138000 python3[1986]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 00:52:17 IQ138000 python3[1986]:            |                       slot 2: none
Oct 11 00:52:17 IQ138000 python3[1986]:   --------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 00:52:17 IQ138000 python3[1986]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 00:52:17 IQ138000 python3[1986]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 00:52:17 IQ138000 python3[1986]:    -------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 00:52:17 IQ138000 python3[1986]:   -------------------------------
Oct 11 00:52:17 IQ138000 python3[1986]:   Properties |            active: yes
Oct 11 00:52:17 IQ138000 python3[1986]:              |              imsi: 250997340491874
Oct 11 00:52:17 IQ138000 python3[1986]:              |             iccid: 8970199210429593744
Oct 11 00:52:17 IQ138000 python3[1986]:              |       operator id: 25099
Oct 11 00:52:17 IQ138000 python3[1986]:              |     operator name: Beeline
Oct 11 00:52:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:52:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 00:52:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 input(s) @ 8708 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 00:52:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:52:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 00:52:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 00:52:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
-- Boot acbcaf75345d439b810a045352a80249 --
Oct 11 01:00:35 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:00:35 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:00:35 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:00:35 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:00:35 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:00:35 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:00:35 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:00:35 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:00:35 IQ138000 kernel: Zone ranges:
Oct 11 01:00:35 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:00:35 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:00:35 IQ138000 kernel: Movable zone start for each node
Oct 11 01:00:35 IQ138000 kernel: Early memory node ranges
Oct 11 01:00:35 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:00:35 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:00:35 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:00:35 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:00:35 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:00:35 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:00:35 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:00:35 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:00:35 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:00:35 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:00:35 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:00:35 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:00:35 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:00:35 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:00:35 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:00:35 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:00:35 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:00:35 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:00:35 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:00:35 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:00:35 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:00:35 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:00:35 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:00:35 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:00:35 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:00:35 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:00:35 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:00:35 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:00:35 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:00:35 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:00:35 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:00:35 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:00:35 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:00:35 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:00:35 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:00:35 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:00:35 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:00:35 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:00:35 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:00:35 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:00:35 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:00:35 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:00:35 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:00:35 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:00:35 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:00:35 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:00:35 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:00:35 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:00:35 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:00:35 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:00:35 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:00:35 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:00:35 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:00:35 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:00:35 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:00:35 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:00:35 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:00:35 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:00:35 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:00:35 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:00:35 IQ138000 kernel: No ATAGs?
Oct 11 01:00:35 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:00:35 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:00:35 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:00:35 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:00:35 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:00:35 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:00:35 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:00:35 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:00:35 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:00:35 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:00:35 IQ138000 kernel: PTP clock support registered
Oct 11 01:00:35 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:00:35 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:00:35 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:00:35 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:00:35 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:00:35 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:00:35 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:00:35 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:00:35 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:00:35 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:00:35 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:00:35 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:00:35 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:00:35 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:00:35 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:00:35 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:00:35 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:00:35 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:00:35 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:00:35 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:00:35 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:00:35 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:00:35 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:00:35 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:00:35 IQ138000 kernel: brd: module loaded
Oct 11 01:00:35 IQ138000 kernel: loop: module loaded
Oct 11 01:00:35 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:00:35 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:00:35 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:00:35 IQ138000 kernel: CAN device driver interface
Oct 11 01:00:35 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:00:35 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:00:35 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:00:35 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:00:35 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:00:35 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:00:35 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:00:35 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:00:35 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:00:35 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:00:35 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:00:35 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:00:35 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:00:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:00:35 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:00:35 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:00:35 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:00:35 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:00:35 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:00:35 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:00:35 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:00:35 IQ138000 kernel: can: controller area network core
Oct 11 01:00:35 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:00:35 IQ138000 kernel: can: raw protocol
Oct 11 01:00:35 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:00:35 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:00:35 IQ138000 kernel: can: SAE J1939
Oct 11 01:00:35 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:00:35 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:00:35 IQ138000 kernel: registered taskstats version 1
Oct 11 01:00:35 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:00:35 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:00:35 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:00:35 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:00:35 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:00:35 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:00:35 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:00:35 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:00:35 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:00:31 UTC (1760144431)
Oct 11 01:00:35 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:00:35 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:00:35 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:00:35 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:00:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:00:35 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:00:35 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:00:35 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:00:35 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:00:35 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:00:35 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:00:35 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:00:35 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:00:35 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:00:35 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: random: fast init done
Oct 11 01:00:35 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:00:35 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:00:35 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:00:35 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:00:35 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:00:35 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:00:35 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:00:35 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:00:35 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:00:35 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:00:35 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:00:35 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:00:35 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:00:35 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:00:35 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:00:35 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:00:35 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:00:35 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:00:35 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:00:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:00:35 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:00:35 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:00:35 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:00:35 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:00:35 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:00:35 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:00:35 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:00:35 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:00:35 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:00:35 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:00:35 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:00:35 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:00:35 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:00:35 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:00:35 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:00:35 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:00:35 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:00:35 IQ138000 kernel: of_cfs_init
Oct 11 01:00:35 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:00:35 IQ138000 kernel: ALSA device list:
Oct 11 01:00:35 IQ138000 kernel:   No soundcards found.
Oct 11 01:00:35 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:00:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:00:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:00:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:00:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:00:35 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:00:35 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:00:35 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:00:35 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:00:35 IQ138000 kernel:   with arguments:
Oct 11 01:00:35 IQ138000 kernel:     /sbin/init
Oct 11 01:00:35 IQ138000 kernel:   with environment:
Oct 11 01:00:35 IQ138000 kernel:     HOME=/
Oct 11 01:00:35 IQ138000 kernel:     TERM=linux
Oct 11 01:00:35 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:00:35 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:00:35 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:00:35 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:00:35 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:00:35 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:00:35 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:00:35 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:00:35 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:00:35 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:00:35 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:00:35 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:00:35 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:00:35 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:00:35 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:00:35 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:00:35 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:00:35 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:00:35 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:00:35 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:00:35 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:00:35 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:00:35 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:00:35 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:00:35 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:00:35 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:00:35 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:00:35 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:00:35 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:00:35 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:00:35 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:00:35 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:00:35 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:00:35 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:00:35 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:00:35 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:00:35 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:00:35 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:00:35 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:00:35 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:00:35 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:00:35 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:00:35 IQ138000 systemd-journald[138]: Journal started
Oct 11 01:00:35 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:00:35 IQ138000 systemd-fsck[143]: rootfs1: clean, 37044/131072 files, 278742/524288 blocks
Oct 11 01:00:35 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:00:35 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:00:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:00:35 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:00:35 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:00:35 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:00:36 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:00:36 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:00:36 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:00:36 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:00:36 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:00:36 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:00:36 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:00:36 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:00:36 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:00:36 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:00:36 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:00:36 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:00:36 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:00:36 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:00:36 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:00:36 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:00:36 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:00:37 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 01:00:37 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:00:37 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:00:37 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:00:37 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:00:37 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:00:37 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:00:37 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:00:37 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:00:37 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:00:37 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:00:37 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:00:37 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:00:37 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:00:37 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:00:37 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 systemd-udevd[167]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:00:37 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:00:37 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:00:37 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:00:37 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:00:37 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:00:37 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:00:37 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:00:37 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:00:38 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:00:38 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:00:38 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:00:38 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:00:38 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 01:00:38 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:00:38 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:00:38 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:00:38 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:00:38 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:00:38 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:00:38 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:00:38 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:00:38 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:00:38 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:00:38 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:00:38 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:00:38 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:00:38 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:00:38 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:00:38 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:00:38 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:00:38 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:00:38 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:00:38 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:00:38 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 01:00:38 IQ138000 systemd-fsck[216]: data: clean, 16440/328656 files, 372142/1313536 blocks
Oct 11 01:00:38 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:00:38 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:00:38 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:00:38 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:00:38 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:00:38 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:00:39 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:00:39 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:00:39 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:00:39 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 45.565ms for 460 entries.
Oct 11 01:00:39 IQ138000 systemd-journald[138]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 502.4M, max 496.6M, 0B free.
Oct 11 01:00:39 IQ138000 kernel: random: crng init done
Oct 11 01:00:39 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:00:39 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:00:39 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 01:00:39 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:00:39 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:00:39 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:00:39 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:00:39 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:00:39 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:00:39 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:00:40 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:00:40 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:00:40 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:00:40 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:00:40 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:00:40 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:00:40 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:00:40 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:00:40 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:00:40 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:00:40 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:00:40 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:00:40 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:00:40 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:00:40 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:00:40 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:00:40 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:00:40 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:00:40 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:00:40 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:00:40 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:00:40 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:00:40 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:00:40 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:00:40 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 01:00:40 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:00:40 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:00:40 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 01:00:40 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:00:40 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:00:40 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:00:40 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:00:40 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:00:40 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:00:40 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 01:00:41 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:00:41 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 01:00:41 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:00:41 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:00:41 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:00:41 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:00:41 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:00:41 IQ138000 wb-watchdog[328]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:00:41 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:00:41 IQ138000 migrate.sh[322]: Error: No such file or directory
Oct 11 01:00:41 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:00:41 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:00:41 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:00:41 IQ138000 migrate.sh[341]: Error: No such file or directory
Oct 11 01:00:41 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:00:41 IQ138000 reverse-ssh.sh[349]: Error: No such file or directory
Oct 11 01:00:41 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:00:41 IQ138000 migrate.sh[355]: Error: No such file or directory
Oct 11 01:00:41 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:00:41 IQ138000 rules-preprocessor[336]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:00:41 IQ138000 rules-preprocessor[336]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:00:41 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:00:41 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:00:41 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:00:41 IQ138000 migrate.sh[367]: Error: No such file or directory
Oct 11 01:00:41 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Successfully dropped root privileges.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: avahi-daemon 0.8 starting up.
Oct 11 01:00:41 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Successfully called chroot().
Oct 11 01:00:41 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Successfully dropped remaining capabilities.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: No service file found in /etc/avahi/services.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Network interface enumeration completed.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Registering new address record for ::1 on lo.*.
Oct 11 01:00:41 IQ138000 avahi-daemon[370]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:00:41 IQ138000 migrate.sh[383]: Error: No such file or directory
Oct 11 01:00:41 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:00:41 IQ138000 wb-watch-configs[388]: Watched dirs: /etc /etc/network
Oct 11 01:00:41 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:00:41 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:00:41 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 01:00:41 IQ138000 wpa_supplicant[384]: Successfully initialized wpa_supplicant
Oct 11 01:00:41 IQ138000 systemd-logind[346]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:00:41 IQ138000 systemd-logind[346]: New seat seat0.
Oct 11 01:00:41 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:00:41 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:00:41 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:41 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:00:41 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:00:41 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:00:41 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:41 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:00:41 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:00:41 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:00:41 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:00:41 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:00:41 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:41 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:00:41 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:00:42 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:00:42 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:00:42 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:00:42 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:00:42 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.1837] NetworkManager (version 1.42.4) is starting... (boot:acbcaf75-345d-439b-810a-045352a80249)
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.1841] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:00:42 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.2047] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:00:42 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:00:42 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.2620] manager[0x687128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:00:42 IQ138000 monit[321]: Starting daemon monitor: monit.
Oct 11 01:00:42 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:00:42 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:00:42 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:00:42 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:00:42 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:00:42 IQ138000 avahi-daemon[370]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1501763292.
Oct 11 01:00:42 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:00:42 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:00:42 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:00:42 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:00:42 IQ138000 ModemManager[485]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:00:42 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:00:42 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.9629] hostname: hostname: using hostnamed
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.9633] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.9669] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.9757] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.9802] manager[0x687128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:00:42 IQ138000 NetworkManager[405]: <info>  [1760144442.9805] manager[0x687128]: rfkill: WWAN hardware radio set enabled
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0183] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0267] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0307] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0555] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0598] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0620] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0625] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0630] manager: Networking is enabled by state file
Oct 11 01:00:43 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0729] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0733] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0734] ifupdown: management mode: unmanaged
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0736] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.0738] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:00:43 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:00:43 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1419] dhcp: init: Using DHCP client 'internal'
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1442] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1545] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1611] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1696] device (lo): Activation: starting connection 'lo' (fff0b631-c254-488c-b134-e90de594b9c2)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1839] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.1869] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:00:43 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:00:43 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.5425] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.5450] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.5501] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.5567] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:00:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:00:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:00:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:00:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:00:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:00:43 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.7559] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.7800] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.7913] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:00:43 IQ138000 NetworkManager[405]: <info>  [1760144443.7990] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.5561] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.5617] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.5644] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.6332] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.6363] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.6411] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.6479] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.7007] modem-manager: ModemManager available
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.7013] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.7028] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.7067] device (lo): Activation: successful, device activated.
Oct 11 01:00:44 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9574] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9582] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9602] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9623] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9707] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9713] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9731] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9750] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9787] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9839] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9859] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:00:44 IQ138000 NetworkManager[405]: <info>  [1760144444.9907] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:45 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:00:45 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:00:45 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:00:48 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:00:48 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:00:48 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 01:00:48 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:48 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:00:48 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:00:49 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:00:49 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 01:00:49 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:49 IQ138000 init.sh[1320]: ...
Oct 11 01:00:49 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 01:00:49 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:49 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 01:00:49 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 01:00:49 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:00:49 IQ138000 init.sh[1430]: In file included from -:24:
Oct 11 01:00:49 IQ138000 init.sh[1430]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:49 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:00:49 IQ138000 init.sh[1320]: ...
Oct 11 01:00:49 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 01:00:49 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:50 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 01:00:50 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 01:00:50 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:00:50 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 01:00:50 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:50 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:00:50 IQ138000 init.sh[1491]: In file included from -:11:
Oct 11 01:00:50 IQ138000 init.sh[1491]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:00:50 IQ138000 init.sh[1320]: ...
Oct 11 01:00:50 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:00:50 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:00:51 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:00:51 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:00:51 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:00:51 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:00:51 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:00:51 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:00:51 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:00:51 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:00:51 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:00:51 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:00:51 IQ138000 lsyncd[1616]: 01:00:51 Normal: --- Startup ---
Oct 11 01:00:51 IQ138000 lsyncd[1616]: 01:00:51 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:00:51 IQ138000 lsyncd[1616]: iq_network_manager/iq_network_manager.log
Oct 11 01:00:51 IQ138000 lsyncd[1616]: journal
Oct 11 01:00:51 IQ138000 lsyncd[1616]: messages
Oct 11 01:00:51 IQ138000 knxd[1610]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:00:51 IQ138000 knxd[1610]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:00:51 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:00:51 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:00:51 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:00:51 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:00:51 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:00:51 IQ138000 lsyncd[1633]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:00:51 IQ138000 lsyncd[1626]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:00:51 IQ138000 lsyncd[1626]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:00:51 IQ138000 lsyncd[1616]: 01:00:51 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:00:51 IQ138000 ntpd[1627]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:00:51 IQ138000 ntpd[1627]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:00:51 IQ138000 ntpd[1627]: ----------------------------------------------------
Oct 11 01:00:51 IQ138000 ntpd[1627]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:00:51 IQ138000 ntpd[1627]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:00:51 IQ138000 ntpd[1627]: corporation.  Support and training for ntp-4 are
Oct 11 01:00:51 IQ138000 ntpd[1627]: available at https://www.nwtime.org/support
Oct 11 01:00:51 IQ138000 ntpd[1627]: ----------------------------------------------------
Oct 11 01:00:51 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:00:51 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:00:52 IQ138000 persist_meter_data.sh[1648]: Error: No such file or directory
Oct 11 01:00:52 IQ138000 ntpd[1650]: proto: precision = 0.958 usec (-20)
Oct 11 01:00:52 IQ138000 ntpd[1650]: basedate set to 2020-09-11
Oct 11 01:00:52 IQ138000 ntpd[1650]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:00:52 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:00:52 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:00:52 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:00:52 IQ138000 ntpd[1650]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:00:52 IQ138000 ntpd[1650]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:00:52 IQ138000 ntpd[1650]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:00:52 IQ138000 ntpd[1650]: Listen normally on 3 lo [::1]:123
Oct 11 01:00:52 IQ138000 ntpd[1650]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:00:52 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:00:52 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:00:52 IQ138000 wb-knxd-config.sh[1517]: No /dev/ttyKNX found, disabling level2
Oct 11 01:00:52 IQ138000 wb-knxd-config.sh[1517]: Restart knxd
Oct 11 01:00:52 IQ138000 NetworkManager[405]: <info>  [1760144452.1805] manager: startup complete
Oct 11 01:00:52 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:00:52 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:00:52 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:00:52 IQ138000 wb-mqtt-w1[1685]: MQTT broker localhost:1883
Oct 11 01:00:52 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:52 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:00:52 IQ138000 wb-mqtt-w1[1685]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:00:52 IQ138000 wb-mqtt-w1[1685]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:00:52 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:00:52 IQ138000 wb-connection-manager[1506]: Connection LegacyWiFi not found, skipping
Oct 11 01:00:52 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:00:52 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:00:52 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:00:52 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:00:52 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:00:52 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:00:52 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:00:52 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:52 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:00:52 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:00:52 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:00:52 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:00:52 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:52 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:00:52 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:00:52 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:00:52 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:00:52 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:00:52 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:00:52 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:00:52 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:00:52 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:00:52 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:00:52 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:00:52 IQ138000 ntpd[1650]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:00:53 IQ138000 vnstatd[1654]: Info: vnStat daemon 2.6 started. (pid:1654 uid:110 gid:117 64-bit)
Oct 11 01:00:53 IQ138000 vnstatd[1654]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:00:53 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 01:00:53 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:00:53 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:00:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:00:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:00:53 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:00:53 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:00:53 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:00:53 IQ138000 sshd[1739]: Server listening on 0.0.0.0 port 22.
Oct 11 01:00:53 IQ138000 sshd[1739]: Server listening on :: port 22.
Oct 11 01:00:53 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:00:53 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:00:53 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:00:53 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:00:53 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:00:53 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:00:53 IQ138000 wpa_supplicant[384]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:00:53 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:00:53 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:00:53 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:00:53 IQ138000 NetworkManager[405]: <error> [1760144453.6913] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:00:53 IQ138000 NetworkManager[405]: <info>  [1760144453.6916] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1506 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:00:53 IQ138000 wb-connection-manager[1506]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:00:53 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:00:53 IQ138000 reverse-ssh.sh[1867]: Error: No such file or directory
Oct 11 01:00:53 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:53 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:00:53 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:00:53 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:00:53 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:53 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:00:53 IQ138000 ntpd[1650]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:00:54 IQ138000 wb-adjust-systime[1862]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:00:54 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:00:54 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:00:54 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:00:54 IQ138000 wb-adjust-systime[1862]: Drift file is valid (was recently edited)
Oct 11 01:00:54 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:00:54 IQ138000 mosquitto[1913]: 1760144454: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:00:54 IQ138000 knxd[1929]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:00:54 IQ138000 knxd[1929]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:00:54 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:00:54 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:00:54 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4562] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4570] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1506 uid=0 result="success"
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4577] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4599] manager: NetworkManager state is now CONNECTING
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4642] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:54 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:00:54 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4769] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.4772] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:54 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5191] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5214] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5318] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5388] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5390] Config: added 'scan_ssid' value '1'
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5391] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5393] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.5394] Config: added 'psk' value '<hidden>'
Oct 11 01:00:54 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:00:54 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:00:54 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.7390] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:00:54 IQ138000 NetworkManager[405]: <info>  [1760144454.7393] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:00:54 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:00:54 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:00:54 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:00:54 IQ138000 wb-mqtt-db[2015]: MQTT broker localhost:1883
Oct 11 01:00:54 IQ138000 wb-mqtt-db[2015]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:00:54 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:00:54 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:54 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:00:54 IQ138000 ntpd[1650]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:00:55 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:00:55 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:00:55 IQ138000 wb-mqtt-db[2015]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:00:55 IQ138000 wb-mqtt-db[2015]: INFO: [sqlite] Create indices if necessary
Oct 11 01:00:55 IQ138000 wb-mqtt-db[2015]: INFO: [sqlite] Analyzing data table
Oct 11 01:00:55 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:00:55 IQ138000 wb-mqtt-logs[2045]: MQTT broker localhost:1883
Oct 11 01:00:55 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:00:55 IQ138000 wb-mqtt-logs[2045]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:55 IQ138000 wb-mqtt-logs[2045]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:00:55 IQ138000 wb-mqtt-knx[2032]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:55 IQ138000 wb-mqtt-knx[2032]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:00:55 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:00:55 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:00:55 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:00:55 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.672s CPU time.
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:00:55 IQ138000 wb-mqtt-iec104[2021]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:00:55 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:00:55 IQ138000 ntpd[1650]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:00:56 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:00:56 IQ138000 wb-mqtt-iec104[2021]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 01:00:56 IQ138000 wb-mqtt-iec104[2021]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 01:00:56 IQ138000 wb-mqtt-confed[2005]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:00:56 IQ138000 wb-mqtt-confed[2005]: INFO: [wbgo_mqtt] confed-IQ138000-2005: MQTT connection established
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:00:56 IQ138000 wb-mqtt-opcua[2080]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:00:56 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:00:56 IQ138000 wb-mqtt-logs[2045]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:00:56 IQ138000 wb-mqtt-logs[2045]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:00:56 IQ138000 wb-mqtt-logs[2045]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:00:56 IQ138000 wb-mqtt-logs[2045]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:00:56 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:00:56 IQ138000 wb-mqtt-iec104[2188]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:00:57 IQ138000 wb-mqtt-opcua[2200]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:00:57 IQ138000 wb-mqtt-mbgate[2055]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:00:57 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:00:57 IQ138000 wb-mqtt-iec104[2188]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:00:57 IQ138000 wb-mqtt-gpio[1878]: INFO: [gpio driver] Started
Oct 11 01:00:57 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:00:57 IQ138000 wb-mqtt-opcua[2200]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:00:57 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:00:57 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:00:57 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:00:57 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:00:57 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:00:58 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:00:58 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:00:58 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:00:58 IQ138000 wb-mqtt-knx[2032]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:00:58 IQ138000 wb-mqtt-knx[2032]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:00:58 IQ138000 wb-mqtt-knx[2032]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:00:58 IQ138000 wb-mqtt-knx[2032]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:00:58 IQ138000 wb-mqtt-knx[2032]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:00:59 IQ138000 python3[1976]: No data file found at /tmp/network_status_cache.json
Oct 11 01:00:59 IQ138000 python3[1976]: Connecting to MQTT
Oct 11 01:00:59 IQ138000 python3[1976]: Connected to MQTT
Oct 11 01:00:59 IQ138000 python3[1976]: Connection returned result: Connection Accepted.
Oct 11 01:01:00 IQ138000 NetworkManager[405]: <info>  [1760144460.0349] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:01:00 IQ138000 NetworkManager[405]: <info>  [1760144460.0404] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:01:01 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2071 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device lo fff0b631-c254-488c-b134-e90de594b9c2 /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:01:01 IQ138000 wb-device-manager[1989]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:01:01 IQ138000 wb-device-manager[1989]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:01:01 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New active connection lo fff0b631-c254-488c-b134-e90de594b9c2 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:01:02 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:01:02 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:01:03 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:01:03 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:01:03 IQ138000 kernel: dldo4: disabling
Oct 11 01:01:03 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 01:01:03 IQ138000 kernel: vcc-sd: disabling
Oct 11 01:01:03 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:01:04 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:01:04 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:01:04 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:01:04 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: MQTT broker localhost:1883
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:01:04 IQ138000 wb-mqtt-adc[3191]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:01:04 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:04 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:01:04 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:01:04 IQ138000 knxd[3240]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:01:04 IQ138000 knxd[3240]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:01:04 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:01:04 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:01:04 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:01:05 IQ138000 wb-mqtt-confed[2005]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:01:05 IQ138000 wb-mqtt-db[2015]: INFO: [sqlite] DB initialization is done
Oct 11 01:01:05 IQ138000 wb-gsm[3373]: main: Called from pid 1 (systemd)
Oct 11 01:01:06 IQ138000 wb-gsm[3422]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:01:06 IQ138000 wb-usb-otg-start.sh[3487]: : wb-usb-otg-start
Oct 11 01:01:06 IQ138000 wb-usb-otg-start.sh[3487]: main: setup_device()
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:01:06 IQ138000 wb-gsm[3486]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:01:06 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:01:06 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:01:06 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:01:06 IQ138000 kernel: using random self ethernet address
Oct 11 01:01:06 IQ138000 kernel: using random host ethernet address
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:01:06 IQ138000 wb-usb-otg-start.sh[3487]: main: enabling profile rndis
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:01:06 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:01:06 IQ138000 NetworkManager[405]: <info>  [1760144466.9900] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:01:06 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:01:06 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:01:06 IQ138000 systemd-udevd[3495]: Using default interface naming scheme 'v247'.
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:01:07 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:01:07 IQ138000 NetworkManager[405]: <info>  [1760144467.1648] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:01:07 IQ138000 wb-gsm[3555]: should_enable: Should enable GSM modem
Oct 11 01:01:07 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: DB logger started, go to main loop
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:01:07 IQ138000 wb-mqtt-db[2015]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2456)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2463)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2470)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2483)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2496)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2509)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2522)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2535)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:01:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:01:08 IQ138000 wb-gsm[3632]: main: Called from pid 3557 (wb-gsm-mm)
Oct 11 01:01:08 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:01:08 IQ138000 wb-gsm[3644]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:01:08 IQ138000 NetworkManager[405]: <info>  [1760144468.7330] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:01:08 IQ138000 NetworkManager[405]: <info>  [1760144468.7332] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:01:08 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:01:08 IQ138000 wb-gsm[3667]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:01:09 IQ138000 python3[1976]: Выполнение: service wb-connection-manager stop
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:01:09 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:01:09 IQ138000 npm[1692]: > zigbee2mqtt@2.1.1 start
Oct 11 01:01:09 IQ138000 npm[1692]: > node index.js
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:01:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:01:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:01:11 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:12 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:01:12 IQ138000 wb-gsm[4052]: mm_off: Modem is already OFF
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:13 IQ138000 npm[3754]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:13 IQ138000 wb-gsm[4122]: main: Called from pid 3557 (wb-gsm-mm)
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:13 IQ138000 wb-gsm[4134]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:13 IQ138000 wb-gsm[4157]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:01:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:01:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:01:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:01:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:17 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:01:17 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:17 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:17 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:17 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:01:17 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:17 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:01:17 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:01:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:01:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:01:17 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:01:17 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:01:17 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:01:17 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:01:17 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:01:17 IQ138000 knxd[4519]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:01:17 IQ138000 knxd[4519]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:01:17 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:01:17 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:01:17 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:01:17 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.146s CPU time.
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: MQTT broker localhost:1883
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:01:17 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:01:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:01:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:01:17 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: w1 thread Started
Oct 11 01:01:17 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:01:17 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:01:17 IQ138000 wb-mqtt-w1[4540]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:01:17 IQ138000 python3[1976]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:01:17 IQ138000 python3[1976]:  
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:01:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <warn>  [1760144479.5285] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <info>  [1760144479.5287] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:01:19 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <info>  [1760144479.5306] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <warn>  [1760144479.5324] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <info>  [1760144479.5336] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <info>  [1760144479.5601] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:01:19 IQ138000 NetworkManager[405]: <info>  [1760144479.5603] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:01:20 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:01:20 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:01:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:01:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:01:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:01:22 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:01:22 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:23 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:23 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:01:23 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:01:23 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:01:23 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:01:23 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:01:23 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:01:23 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:01:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:01:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:01:23 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:01:23 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:01:23 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:01:23 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:01:23 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:01:23 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:01:23 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:01:23 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:23 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:01:23 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 12534 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:01:23 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:23 IQ138000 watchdog[4629]: starting daemon (5.16):
Oct 11 01:01:23 IQ138000 watchdog[4629]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:01:23 IQ138000 watchdog[4629]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:01:23 IQ138000 watchdog[4629]:  ping: no machine to check
Oct 11 01:01:23 IQ138000 watchdog[4629]:  file: no file to check
Oct 11 01:01:23 IQ138000 watchdog[4629]:  pidfile: /var/run/sshd.pid
Oct 11 01:01:23 IQ138000 watchdog[4629]:  interface: no interface to check
Oct 11 01:01:23 IQ138000 watchdog[4629]:  temperature: no sensors to check
Oct 11 01:01:23 IQ138000 watchdog[4629]:  no test binary files
Oct 11 01:01:23 IQ138000 watchdog[4629]:  no repair binary files
Oct 11 01:01:23 IQ138000 watchdog[4629]:  error retry time-out = 30 seconds
Oct 11 01:01:23 IQ138000 watchdog[4629]:  repair attempts = 1
Oct 11 01:01:23 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:01:23 IQ138000 watchdog[4629]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:01:23 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:01:23 IQ138000 watchdog[4629]: watchdog now set to 120 seconds
Oct 11 01:01:23 IQ138000 watchdog[4629]: hardware watchdog identity: WBEC WDT
Oct 11 01:01:23 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:23 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:01:23 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:01:23 IQ138000 systemd[1]: Startup finished in 3.801s (kernel) + 50.190s (userspace) = 53.992s.
Oct 11 01:01:23 IQ138000 wb-rules[4614]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:01:23 IQ138000 wb-rules[4614]: INFO: driver is created
Oct 11 01:01:23 IQ138000 wb-rules[4614]: INFO: driver loop is started
Oct 11 01:01:23 IQ138000 wb-rules[4614]: INFO: wait for driver to become ready
Oct 11 01:01:23 IQ138000 wb-rules[4614]: INFO: [wbgo_mqtt] rules-IQ138000-4614: MQTT connection established
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:23 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 5 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:25 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:01:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:25 IQ138000 wb-rules[4614]: INFO: driver is ready
Oct 11 01:01:25 IQ138000 wb-rules[4614]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:01:25 IQ138000 wb-rules[4614]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4614: MQTT connection established
Oct 11 01:01:25 IQ138000 wb-rules[4614]: INFO: [engine] Starting sync loop
Oct 11 01:01:25 IQ138000 wb-rules[4614]: INFO: [engine] Starting main loop
Oct 11 01:01:25 IQ138000 wb-rules[4614]: INFO: the engine is ready
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:01:26 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:26 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:26 IQ138000 wb-rules[4614]: WARNING: [rule warning] DAC: no config file
Oct 11 01:01:27 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:27 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:01:27 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:01:27 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:01:27 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:01:27 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:01:27 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:01:27 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:01:27 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 3e:aa:57:08:69:bf
Oct 11 01:01:27 IQ138000 NetworkManager[405]: <info>  [1760144487.1749] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:01:27 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:01:27 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:01:27 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:01:27 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:01:27 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:01:27 IQ138000 systemd-udevd[4898]: Using default interface naming scheme 'v247'.
Oct 11 01:01:27 IQ138000 systemd-udevd[4898]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:27 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:27 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:01:27 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:01:27 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:01:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:01:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:01:27 IQ138000 knxd[4993]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:01:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:01:27 IQ138000 knxd[4993]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:01:27 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:01:27 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:01:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:01:29 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 python3[1976]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 01:01:29 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:01:29 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:30 IQ138000 wb-gsm[5024]: mm_on: Waiting for modem to start
Oct 11 01:01:30 IQ138000 wb-rules[4614]: INFO: all rule files are loaded
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:31 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:01:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:32 IQ138000 npm[3754]: [2025-10-11 01:01:32] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:32 IQ138000 npm[3754]: [2025-10-11 01:01:32] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:01:32 IQ138000 npm[3754]: [2025-10-11 01:01:32] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:01:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:01:33 IQ138000 npm[3754]: [2025-10-11 01:01:33] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:01:33 IQ138000 npm[3754]: [2025-10-11 01:01:33] info:         zh:zstack:znp: Serialport opened
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:01:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:34 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:01:35 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:36 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: Currently 4 devices are joined.
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:01:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:01:37.374+00:00
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:01:37.374Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144677392,"cmd_timestamp_ms":1760144497392,"source":"schedule"}
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144677392,"cmd_timestamp_ms":1760144497392,"source":"schedule"}
Oct 11 01:01:37 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: Connected to MQTT server
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:01:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:01:37.760+00:00
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:01:37.760Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144677787,"cmd_timestamp_ms":1760144497787,"source":"schedule"}
Oct 11 01:01:37 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144677787,"cmd_timestamp_ms":1760144497787,"source":"schedule"}
Oct 11 01:01:37 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:01:37 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:01:37 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:01:37 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: Started frontend on port 8282
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:01:37 IQ138000 npm[3754]: [2025-10-11 01:01:37] info:         z2m: Zigbee2MQTT started!
Oct 11 01:01:38 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:01:38 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:01:38 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:01:38.152+00:00
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:01:38.152Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678170,"cmd_timestamp_ms":1760144498170,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678170,"cmd_timestamp_ms":1760144498170,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:01:38.200+00:00
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:01:38.200Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:01:38 IQ138000 knxd[5145]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:01:38 IQ138000 knxd[5145]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:01:38 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:01:38 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:01:38 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678230,"cmd_timestamp_ms":1760144498230,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678230,"cmd_timestamp_ms":1760144498230,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:01:38.241+00:00
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:01:38.241Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678253,"cmd_timestamp_ms":1760144498253,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678253,"cmd_timestamp_ms":1760144498253,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:01:38.352+00:00
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:01:38.352Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678375,"cmd_timestamp_ms":1760144498375,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678375,"cmd_timestamp_ms":1760144498375,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:01:38 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:01:38.495+00:00
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:01:38.495Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678509,"cmd_timestamp_ms":1760144498509,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678509,"cmd_timestamp_ms":1760144498509,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:01:38.694+00:00
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:01:38.694Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678709,"cmd_timestamp_ms":1760144498709,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144678709,"cmd_timestamp_ms":1760144498709,"source":"schedule"}
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:38 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:01:39.148+00:00
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:01:39.148Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144679163,"cmd_timestamp_ms":1760144499163,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144679163,"cmd_timestamp_ms":1760144499163,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:01:39.321+00:00
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:01:39.321Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144679334,"cmd_timestamp_ms":1760144499334,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144679334,"cmd_timestamp_ms":1760144499334,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:01:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:01:39.499+00:00
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:01:39.499Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144679518,"cmd_timestamp_ms":1760144499518,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144679518,"cmd_timestamp_ms":1760144499518,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:01:39 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:01:39.718+00:00
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:01:39.718Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144679727,"cmd_timestamp_ms":1760144499727,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144679727,"cmd_timestamp_ms":1760144499727,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:01:39.868+00:00
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:01:39.868Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144679879,"cmd_timestamp_ms":1760144499879,"source":"schedule"}
Oct 11 01:01:39 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144679879,"cmd_timestamp_ms":1760144499879,"source":"schedule"}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:01:40.004+00:00
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:01:40.004Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144680015,"cmd_timestamp_ms":1760144500015,"source":"schedule"}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144680015,"cmd_timestamp_ms":1760144500015,"source":"schedule"}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:01:40.145+00:00
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:01:40.145Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144680157,"cmd_timestamp_ms":1760144500157,"source":"schedule"}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144680157,"cmd_timestamp_ms":1760144500157,"source":"schedule"}
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:01:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:01:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:01:40 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:01:40 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:01:41 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:01:41 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:01:41 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:01:41 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:01:41 IQ138000 wb-watchdog[5270]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:01:41 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:41 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:41 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:01:41 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:01:41 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:01:42 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:01:42 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:01:42 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:01:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 input(s) @ 16936 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:01:45 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:47 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:47 IQ138000 ModemManager[485]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:01:47 IQ138000 ModemManager[485]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 01:01:48 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:48 IQ138000 ModemManager[485]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:01:48 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:01:48 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 01:01:48 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:01:48 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:01:48 IQ138000 knxd[5378]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:01:48 IQ138000 knxd[5378]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:01:48 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:01:48 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:01:48 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:01:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:48 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:01:48 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:01:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:49 IQ138000 python3[1976]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:01:49 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:01:49 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:01:49 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:01:49 IQ138000 ModemManager[485]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7156] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7176] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7196] device (ttyUSB1): modem state 'enabling'
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7230] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7277] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7328] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7344] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:49 IQ138000 NetworkManager[405]: <info>  [1760144509.7383] manager: NetworkManager state is now CONNECTING
Oct 11 01:01:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:49 IQ138000 ModemManager[485]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 01:01:49 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:01:49 IQ138000 ModemManager[485]: <info>  [modem0] power state updated: on
Oct 11 01:01:50 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:01:50 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:01:50 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:01:50 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:01:50 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:01:50 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:01:50 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:01:50 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:01:50 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:01:50 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:01:50 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:01:50 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:01:50 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:01:50 IQ138000 python3[1976]:            |                state: enabling
Oct 11 01:01:50 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:01:50 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:01:50 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:01:50 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:01:50 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:01:50 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:01:50 IQ138000 python3[1976]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:01:50 IQ138000 python3[1976]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:01:50 IQ138000 python3[1976]:  successfully requested primary SIM switch in modem
Oct 11 01:01:50 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:52 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:01:52 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:01:52 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:01:52 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:01:52 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:01:52 IQ138000 lsyncd[5433]: 01:01:52 Normal: --- Startup ---
Oct 11 01:01:52 IQ138000 lsyncd[5433]: 01:01:52 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:01:52 IQ138000 lsyncd[5433]: messages
Oct 11 01:01:52 IQ138000 lsyncd[5433]: iq_network_manager/iq_network_manager.log
Oct 11 01:01:52 IQ138000 lsyncd[5433]: journal
Oct 11 01:01:52 IQ138000 lsyncd[5435]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:01:52 IQ138000 lsyncd[5434]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:01:52 IQ138000 lsyncd[5434]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:01:52 IQ138000 lsyncd[5433]: 01:01:52 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:01:52 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:01:52 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:01:53 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:01:53 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 01:01:54 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] simple connect started...
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (6/10): register
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 01:01:54 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:01:54 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:54 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 01:01:54 IQ138000 NetworkManager[405]: <info>  [1760144514.5529] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:54 IQ138000 NetworkManager[405]: <info>  [1760144514.5559] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:01:54 IQ138000 NetworkManager[405]: <info>  [1760144514.5592] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 01:01:54 IQ138000 NetworkManager[405]: <info>  [1760144514.5615] ppp-manager: starting PPP connection
Oct 11 01:01:54 IQ138000 NetworkManager[405]: <info>  [1760144514.5752] ppp-manager: pppd started with pid 5446
Oct 11 01:01:54 IQ138000 pppd[5446]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:01:54 IQ138000 NetworkManager[5446]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: initializing
Oct 11 01:01:54 IQ138000 pppd[5446]: pppd 2.4.9 started by root, uid 0
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:01:54 IQ138000 pppd[5446]: Using interface ppp0
Oct 11 01:01:54 IQ138000 NetworkManager[5446]: Using interface ppp0
Oct 11 01:01:54 IQ138000 pppd[5446]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:01:54 IQ138000 NetworkManager[5446]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:01:54 IQ138000 NetworkManager[405]: <info>  [1760144514.6468] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:01:54 IQ138000 pppd[5446]: PAP authentication succeeded
Oct 11 01:01:54 IQ138000 pppd[5446]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:01:54 IQ138000 NetworkManager[5446]: PAP authentication succeeded
Oct 11 01:01:54 IQ138000 NetworkManager[5446]: kernel does not support PPP filtering
Oct 11 01:01:54 IQ138000 pppd[5446]: kernel does not support PPP filtering
Oct 11 01:01:54 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 01:01:54 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 01:01:54 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:54 IQ138000 ModemManager[485]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 01:01:55 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:55 IQ138000 pppd[5446]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:01:55 IQ138000 NetworkManager[5446]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:01:55 IQ138000 pppd[5446]: local  IP address 10.133.93.127
Oct 11 01:01:55 IQ138000 NetworkManager[5446]: local  IP address 10.133.93.127
Oct 11 01:01:55 IQ138000 NetworkManager[5446]: remote IP address 10.64.64.64
Oct 11 01:01:55 IQ138000 NetworkManager[5446]: primary   DNS address 172.23.10.131
Oct 11 01:01:55 IQ138000 NetworkManager[5446]: secondary DNS address 172.23.10.130
Oct 11 01:01:55 IQ138000 pppd[5446]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:01:55 IQ138000 pppd[5446]: remote IP address 10.64.64.64
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.2099] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:01:55 IQ138000 pppd[5446]: primary   DNS address 172.23.10.131
Oct 11 01:01:55 IQ138000 pppd[5446]: secondary DNS address 172.23.10.130
Oct 11 01:01:55 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.2138] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.2211] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:55 IQ138000 pppd[5446]: nm-ppp-plugin: ip-up event
Oct 11 01:01:55 IQ138000 pppd[5446]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.2266] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.2333] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.2356] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:01:55 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:01:55 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:01:55 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 01:01:55 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:01:55 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:01:55 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.3232] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.3252] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.3278] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.3319] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:01:55 IQ138000 NetworkManager[405]: <info>  [1760144515.3413] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:01:55 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:55 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:01:56 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:56 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:56 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:56 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:56 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:56 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:01:56 IQ138000 ntpd[1650]: Listen normally on 4 ppp0 10.133.93.127:123
Oct 11 01:01:56 IQ138000 ntpd[1650]: new interface(s) found: waking up resolver
Oct 11 01:01:57 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:57 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:01:57 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:01:57 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:58 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 17 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:01:58 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 01:01:58 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:01:58 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:01:58 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:01:58 IQ138000 wb-mqtt-knx[2032]: INFO: knxd connected successfully
Oct 11 01:01:59 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:00 IQ138000 python3[1976]: Выполнение: mmcli -i any
Oct 11 01:02:00 IQ138000 python3[1976]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 01:02:00 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:00 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:00 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:00 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:00 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:00 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:00 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:00 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:00 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:00 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:00 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:00 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:00 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:00 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:00 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:00 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:00 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:00 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:00 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:00 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:00 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:00 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:00 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:00 IQ138000 python3[1976]:            |       signal quality: 90% (recent)
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:00 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:00 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:00 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:00 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:00 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:00 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:00 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:00 IQ138000 python3[1976]: Current state: home
Oct 11 01:02:00 IQ138000 python3[1976]: SIM registered in the network.
Oct 11 01:02:00 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:00 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:00 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:00 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:00 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:00 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:00 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:00 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:00 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:00 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:00 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:00 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:00 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:00 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:00 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:00 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:00 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:00 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:00 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:00 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:00 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:00 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:00 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:00 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:00 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:00 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:00 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:00 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:00 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:00 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:00 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:00 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:00 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:00 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:00 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:01 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:02 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:02 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:04 IQ138000 ntpd[1650]: Soliciting pool server 45.141.102.99
Oct 11 01:02:04 IQ138000 ntpd[1650]: Soliciting pool server 45.90.217.6
Oct 11 01:02:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:05 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:05 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:05 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:05 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:05 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:05 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:05 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:05 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:05 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:05 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:05 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:05 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:05 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:05 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:05 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:05 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:05 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:05 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:05 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:05 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:05 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:05 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:05 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:05 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:05 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:05 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:05 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:05 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:05 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:05 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:05 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:05 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:05 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:05 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:05 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:05 IQ138000 ntpd[1650]: Soliciting pool server 83.243.68.157
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 4 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:02:06 IQ138000 ntpd[1650]: Soliciting pool server 195.90.182.235
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:02:07 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:08 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:08 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:02:09 IQ138000 ntpd[1650]: Soliciting pool server 93.95.100.104
Oct 11 01:02:09 IQ138000 ntpd[1650]: Soliciting pool server 87.103.245.205
Oct 11 01:02:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:02:10 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:10 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:10 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:10 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:10 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:10 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:10 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:10 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:10 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:10 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:10 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:10 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:10 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:10 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:10 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:10 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:10 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:10 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:10 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:10 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:10 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:10 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:10 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:10 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:10 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:10 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:10 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:10 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:10 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:10 IQ138000 ntpd[1650]: Soliciting pool server 192.36.143.130
Oct 11 01:02:11 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:11 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:11 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:11 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:11 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:11 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:11 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:11 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:11 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:11 IQ138000 ntpd[1650]: receive: Unexpected origin timestamp 0xec942b13.fe1d4ccf does not match aorg 0000000000.00000000 from server@87.103.245.205 xmt 0xec942b13.2e90ee6a
Oct 11 01:02:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:13 IQ138000 ntpd[1650]: Soliciting pool server 51.250.68.198
Oct 11 01:02:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:14 IQ138000 ntpd[1650]: Soliciting pool server 51.250.53.172
Oct 11 01:02:14 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:15 IQ138000 ntpd[1650]: Soliciting pool server 91.206.16.3
Oct 11 01:02:15 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:15 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:15 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:15 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:15 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:15 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:15 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:15 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:15 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:15 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:15 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:15 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:15 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:15 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:15 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:15 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:15 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:15 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:15 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:15 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:15 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:15 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:15 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:15 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:15 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:15 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:15 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:15 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:15 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:15 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:15 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:15 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:15 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:15 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:15 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 4 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:18 IQ138000 ntpd[1650]: Soliciting pool server 77.110.104.58
Oct 11 01:02:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:19 IQ138000 ntpd[1650]: Soliciting pool server 95.53.229.154
Oct 11 01:02:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:02:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:02:20 IQ138000 ntpd[1650]: Soliciting pool server 89.179.240.219
Oct 11 01:02:20 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:20 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:20 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:20 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:20 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:20 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:20 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:20 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:20 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:20 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:20 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:20 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:20 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:20 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:20 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:20 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:20 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:20 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:20 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:20 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:20 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:20 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:20 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:20 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:20 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:20 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:20 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:20 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:20 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:20 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:20 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:20 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:20 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:20 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:20 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:02:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 4 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:25 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:25 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:25 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:25 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:25 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:25 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:25 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:25 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:25 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:25 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:25 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:25 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:25 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:25 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:25 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:25 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:25 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:25 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:25 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:25 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:25 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:25 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:25 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:25 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:25 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:25 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:25 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:25 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:25 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:25 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:25 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:25 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:02:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:02:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:02:28 IQ138000 wb-mqtt-db[2015]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d00033b5dc6/last_seen, row count 7183, limit 7042
Oct 11 01:02:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:28 IQ138000 wb-mqtt-db[2015]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L2, row count 7183, limit 7042
Oct 11 01:02:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:02:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:02:30 IQ138000 python3[1976]: Выполнение: mmcli -m wbc
Oct 11 01:02:30 IQ138000 python3[1976]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:02:30 IQ138000 python3[1976]:    --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:02:30 IQ138000 python3[1976]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:02:30 IQ138000 python3[1976]:            |                model: A7602E-H
Oct 11 01:02:30 IQ138000 python3[1976]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:02:30 IQ138000 python3[1976]:            |            supported: gsm-umts
Oct 11 01:02:30 IQ138000 python3[1976]:            |              current: gsm-umts
Oct 11 01:02:30 IQ138000 python3[1976]:            |         equipment id: 860803062234204
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   System   |               device: wbc
Oct 11 01:02:30 IQ138000 python3[1976]:            |              drivers: option, rndis_host
Oct 11 01:02:30 IQ138000 python3[1976]:            |               plugin: simtech
Oct 11 01:02:30 IQ138000 python3[1976]:            |         primary port: ttyUSB1
Oct 11 01:02:30 IQ138000 python3[1976]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:02:30 IQ138000 python3[1976]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:02:30 IQ138000 python3[1976]:            |                state: connected
Oct 11 01:02:30 IQ138000 python3[1976]:            |          power state: on
Oct 11 01:02:30 IQ138000 python3[1976]:            |          access tech: lte
Oct 11 01:02:30 IQ138000 python3[1976]:            |       signal quality: 93% (recent)
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:02:30 IQ138000 python3[1976]:            |              current: allowed: any; preferred: none
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   3GPP     |                 imei: 860803062234204
Oct 11 01:02:30 IQ138000 python3[1976]:            |          operator id: 25099
Oct 11 01:02:30 IQ138000 python3[1976]:            |        operator name: beeline
Oct 11 01:02:30 IQ138000 python3[1976]:            |         registration: home
Oct 11 01:02:30 IQ138000 python3[1976]:            | packet service state: attached
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:30 IQ138000 python3[1976]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:02:30 IQ138000 python3[1976]:            |                       slot 2: none
Oct 11 01:02:30 IQ138000 python3[1976]:   --------------------------------
Oct 11 01:02:30 IQ138000 python3[1976]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:02:30 IQ138000 python3[1976]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:31 IQ138000 python3[1976]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:02:31 IQ138000 python3[1976]:    -------------------------------
Oct 11 01:02:31 IQ138000 python3[1976]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:02:31 IQ138000 python3[1976]:   -------------------------------
Oct 11 01:02:31 IQ138000 python3[1976]:   Properties |            active: yes
Oct 11 01:02:31 IQ138000 python3[1976]:              |              imsi: 250997340491874
Oct 11 01:02:31 IQ138000 python3[1976]:              |             iccid: 8970199210429593744
Oct 11 01:02:31 IQ138000 python3[1976]:              |       operator id: 25099
Oct 11 01:02:31 IQ138000 python3[1976]:              |     operator name: Beeline
Oct 11 01:02:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:02:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:02:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:02:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:02:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
-- Boot 950d31f9c1ff459f8e496ac7d9aac37a --
Oct 11 01:03:58 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:03:58 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:03:58 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:03:58 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:03:58 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:03:58 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:03:58 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:03:58 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:03:58 IQ138000 kernel: Zone ranges:
Oct 11 01:03:58 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:03:58 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:03:58 IQ138000 kernel: Movable zone start for each node
Oct 11 01:03:58 IQ138000 kernel: Early memory node ranges
Oct 11 01:03:58 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:03:58 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:03:58 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:03:58 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:03:58 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:03:58 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:03:58 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:03:58 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:03:58 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:03:58 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:03:58 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:03:58 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:03:58 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:03:58 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:03:58 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:03:58 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:03:58 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:03:58 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:03:58 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:03:58 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:03:58 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:03:58 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:03:58 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:03:58 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:03:58 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:03:58 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:03:58 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:03:58 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:03:58 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:03:58 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:03:58 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:03:58 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:03:58 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:03:58 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:03:58 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:03:58 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:03:58 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:03:58 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:03:58 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:03:58 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:03:58 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:03:58 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:03:58 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:03:58 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:03:58 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:03:58 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:03:58 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:03:58 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:03:58 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:03:58 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:03:58 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:03:58 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:03:58 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:03:58 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:03:58 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:03:58 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:03:58 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:03:58 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:03:58 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:03:58 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:03:58 IQ138000 kernel: No ATAGs?
Oct 11 01:03:58 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:03:58 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:03:58 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:03:58 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:03:58 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:03:58 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:03:58 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:03:58 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:03:58 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:03:58 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:03:58 IQ138000 kernel: PTP clock support registered
Oct 11 01:03:58 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:03:58 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:03:58 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:03:58 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:03:58 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:03:58 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:03:58 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:03:58 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:03:58 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:03:58 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:03:58 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:03:58 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:03:58 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:03:58 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:03:58 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:03:58 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:03:58 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:03:58 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:03:58 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:03:58 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:03:58 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:03:58 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:03:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:03:58 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:03:58 IQ138000 kernel: brd: module loaded
Oct 11 01:03:58 IQ138000 kernel: loop: module loaded
Oct 11 01:03:58 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:03:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:03:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:03:58 IQ138000 kernel: CAN device driver interface
Oct 11 01:03:58 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:03:58 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:03:58 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:03:58 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:03:58 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:03:58 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:03:58 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:03:58 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:03:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:03:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:03:58 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:03:58 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:03:58 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:03:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:03:58 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:03:58 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:03:58 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:03:58 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:03:58 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:03:58 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:03:58 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:03:58 IQ138000 kernel: can: controller area network core
Oct 11 01:03:58 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:03:58 IQ138000 kernel: can: raw protocol
Oct 11 01:03:58 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:03:58 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:03:58 IQ138000 kernel: can: SAE J1939
Oct 11 01:03:58 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:03:58 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:03:58 IQ138000 kernel: registered taskstats version 1
Oct 11 01:03:58 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:03:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:03:58 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:03:58 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:03:58 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:03:58 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:03:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:03:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:03:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:03:54 UTC (1760144634)
Oct 11 01:03:58 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:03:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:03:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:03:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:03:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:03:58 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:03:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:03:58 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:03:58 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:03:58 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:03:58 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:03:58 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:03:58 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:03:58 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:03:58 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: random: fast init done
Oct 11 01:03:58 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:03:58 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:03:58 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:03:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:03:58 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:03:58 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:03:58 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:03:58 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:03:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:03:58 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:03:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:03:58 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:03:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:03:58 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:03:58 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:03:58 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:03:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:03:58 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:03:58 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:03:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:03:58 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:03:58 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:03:58 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:03:58 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:03:58 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:03:58 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:03:58 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:03:58 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:03:58 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:03:58 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:03:58 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:03:58 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:03:58 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:03:58 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:03:58 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:03:58 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:03:58 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:03:58 IQ138000 kernel: of_cfs_init
Oct 11 01:03:58 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:03:58 IQ138000 kernel: ALSA device list:
Oct 11 01:03:58 IQ138000 kernel:   No soundcards found.
Oct 11 01:03:58 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:03:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:03:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:03:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:03:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:03:58 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:03:58 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:03:58 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:03:58 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:03:58 IQ138000 kernel:   with arguments:
Oct 11 01:03:58 IQ138000 kernel:     /sbin/init
Oct 11 01:03:58 IQ138000 kernel:   with environment:
Oct 11 01:03:58 IQ138000 kernel:     HOME=/
Oct 11 01:03:58 IQ138000 kernel:     TERM=linux
Oct 11 01:03:58 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:03:58 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:03:58 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:03:58 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:03:58 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:03:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:03:58 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:03:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:03:58 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:03:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:03:58 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:03:58 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:03:58 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:03:58 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:03:58 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:03:58 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:03:58 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:03:58 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:03:58 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:03:58 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:03:58 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:03:58 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:03:58 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:03:58 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:03:58 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:03:58 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:03:58 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:03:58 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:03:58 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:03:58 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:03:58 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:03:58 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:03:58 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:03:58 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:03:58 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:03:58 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:03:58 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:03:58 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:03:58 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:03:58 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:03:58 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:03:58 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:03:58 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:03:58 IQ138000 systemd-journald[140]: Journal started
Oct 11 01:03:58 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:03:58 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:03:58 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 01:03:58 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:03:58 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:03:58 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:03:58 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:03:58 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:03:58 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:03:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:03:59 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:03:59 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:03:59 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:03:59 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:03:59 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:03:59 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:03:59 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:03:59 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:03:59 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:03:59 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:03:59 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:03:59 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:03:59 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:03:59 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:03:59 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:03:59 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:03:59 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:03:59 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:03:59 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:03:59 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:04:00 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 01:04:00 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:04:00 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:04:00 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:04:00 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:04:00 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:04:00 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:04:00 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:04:00 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:04:00 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:04:00 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:04:00 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:04:00 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:04:00 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:04:00 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:04:00 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:04:00 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:04:00 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:04:00 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:04:00 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:04:00 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:04:01 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:04:01 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:04:01 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:04:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:04:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:04:01 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:04:01 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 01:04:01 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 01:04:01 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:04:01 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:04:01 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:04:01 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:04:01 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:04:01 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:04:01 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:04:01 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:04:01 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:04:01 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:04:01 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:04:01 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:04:01 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:04:01 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:04:01 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:04:01 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:04:01 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:04:01 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 01:04:01 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:04:01 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:04:01 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:04:01 IQ138000 systemd-fsck[214]: data: clean, 16440/328656 files, 372565/1313536 blocks
Oct 11 01:04:01 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:04:01 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:04:02 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:04:02 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:04:02 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:04:02 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:04:02 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:04:02 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:04:02 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:04:02 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.505ms for 461 entries.
Oct 11 01:04:02 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 502.4M, max 496.6M, 0B free.
Oct 11 01:04:02 IQ138000 kernel: random: crng init done
Oct 11 01:04:02 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:04:02 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:04:02 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 01:04:02 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:04:02 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:04:02 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:04:02 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:04:03 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:04:03 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:04:03 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:04:03 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:04:03 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:04:03 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:04:03 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:04:03 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:04:03 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:04:03 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:04:03 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:04:03 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:04:03 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:04:03 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:04:03 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:04:03 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:04:03 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:04:03 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:04:03 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:04:03 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:04:03 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:04:03 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:04:03 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:04:03 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:04:03 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:04:03 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:04:03 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:04:03 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 01:04:03 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:04:04 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:04:04 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 01:04:04 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:04:04 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:04:04 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:04:04 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:04:04 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:04:04 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:04:04 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 01:04:04 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:04:04 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:04:04 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 01:04:04 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:04:04 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:04:04 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:04:04 IQ138000 migrate.sh[322]: Error: No such file or directory
Oct 11 01:04:04 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:04:04 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:04:04 IQ138000 migrate.sh[333]: Error: No such file or directory
Oct 11 01:04:04 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:04:04 IQ138000 migrate.sh[344]: Error: No such file or directory
Oct 11 01:04:04 IQ138000 reverse-ssh.sh[342]: Error: No such file or directory
Oct 11 01:04:04 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:04:04 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:04:04 IQ138000 migrate.sh[351]: Error: No such file or directory
Oct 11 01:04:04 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:04:04 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:04:04 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:04:04 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:04:04 IQ138000 migrate.sh[363]: Error: No such file or directory
Oct 11 01:04:04 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:04:04 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:04:04 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:04:04 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:04:04 IQ138000 rules-preprocessor[339]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:04:04 IQ138000 rules-preprocessor[339]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Successfully dropped root privileges.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: avahi-daemon 0.8 starting up.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Successfully called chroot().
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Successfully dropped remaining capabilities.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: No service file found in /etc/avahi/services.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Network interface enumeration completed.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Registering new address record for ::1 on lo.*.
Oct 11 01:04:04 IQ138000 avahi-daemon[366]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:04:04 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:04:04 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 01:04:04 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:04:04 IQ138000 wpa_supplicant[378]: Successfully initialized wpa_supplicant
Oct 11 01:04:04 IQ138000 systemd-logind[345]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:04:04 IQ138000 systemd-logind[345]: New seat seat0.
Oct 11 01:04:04 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:04:04 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:04:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:04:04 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:04:04 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:04:04 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:04 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:04:04 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:04:04 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:04:04 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:04:04 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:04:05 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:05 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:04:05 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:04:05 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:04:05 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:04:05 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:04:05 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:04:05 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:04:05 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:04:05 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:04:05 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:04:05 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:04:05 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:04:05 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:04:05 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:04:05 IQ138000 NetworkManager[403]: <info>  [1760144645.3127] NetworkManager (version 1.42.4) is starting... (boot:950d31f9-c1ff-459f-8e49-6ac7d9aac37a)
Oct 11 01:04:05 IQ138000 NetworkManager[403]: <info>  [1760144645.3131] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:04:05 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:04:05 IQ138000 NetworkManager[403]: <info>  [1760144645.3342] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:04:05 IQ138000 monit[323]: Starting daemon monitor: monit.
Oct 11 01:04:05 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:04:05 IQ138000 NetworkManager[403]: <info>  [1760144645.3791] manager[0x6a7128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:04:05 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:04:05 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:04:05 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:04:05 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:04:05 IQ138000 avahi-daemon[366]: Server startup complete. Host name is IQ138000.local. Local service cookie is 2923853454.
Oct 11 01:04:05 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:04:05 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:04:05 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:04:05 IQ138000 ModemManager[468]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:04:05 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:04:05 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0049] hostname: hostname: using hostnamed
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0052] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0088] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0224] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0317] manager[0x6a7128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0320] manager[0x6a7128]: rfkill: WWAN hardware radio set enabled
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0709] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0792] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.0825] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1105] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1178] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1222] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1228] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1232] manager: Networking is enabled by state file
Oct 11 01:04:06 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1317] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1321] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1323] ifupdown: management mode: unmanaged
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1324] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.1326] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:04:06 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:04:06 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2272] dhcp: init: Using DHCP client 'internal'
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2294] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2398] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2435] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2490] device (lo): Activation: starting connection 'lo' (e65da06e-da6f-4734-bf8b-f97382bf128d)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2573] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.2598] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:06 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:04:06 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.6183] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.6207] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.6235] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.6266] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:04:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:04:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:04:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:04:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.8365] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:04:06 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.8472] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.8589] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:04:06 IQ138000 NetworkManager[403]: <info>  [1760144646.8629] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.6754] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.6790] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.6813] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7410] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7450] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7479] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7540] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7971] modem-manager: ModemManager available
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7975] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.7987] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:04:07 IQ138000 NetworkManager[403]: <info>  [1760144647.8025] device (lo): Activation: successful, device activated.
Oct 11 01:04:07 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1190] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1197] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1216] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1234] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1322] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1328] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1349] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1369] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1403] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1445] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1496] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:04:08 IQ138000 NetworkManager[403]: <info>  [1760144648.1539] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:08 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:04:08 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:04:08 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:04:11 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:04:11 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 01:04:11 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:12 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:04:12 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:04:12 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:04:12 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 01:04:12 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:12 IQ138000 init.sh[1320]: ...
Oct 11 01:04:12 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 01:04:12 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:12 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 01:04:13 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 01:04:13 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:04:13 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 01:04:13 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:13 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:04:13 IQ138000 init.sh[1320]: ...
Oct 11 01:04:13 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 01:04:13 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:13 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 01:04:13 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 01:04:13 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:04:13 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 01:04:13 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:14 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:04:14 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 01:04:14 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:04:14 IQ138000 init.sh[1320]: ...
Oct 11 01:04:14 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:04:14 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:04:14 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:04:14 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:04:14 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:04:14 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:04:14 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:04:14 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:04:14 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:04:14 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:04:14 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:04:14 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:04:15 IQ138000 lsyncd[1617]: 01:04:15 Normal: --- Startup ---
Oct 11 01:04:15 IQ138000 knxd[1613]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:04:15 IQ138000 knxd[1613]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:04:15 IQ138000 lsyncd[1617]: 01:04:15 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:04:15 IQ138000 lsyncd[1617]: iq_network_manager/iq_network_manager.log
Oct 11 01:04:15 IQ138000 lsyncd[1617]: messages
Oct 11 01:04:15 IQ138000 lsyncd[1617]: journal
Oct 11 01:04:15 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:04:15 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:04:15 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:04:15 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:04:15 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:04:15 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:04:15 IQ138000 ntpd[1626]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:04:15 IQ138000 ntpd[1626]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:04:15 IQ138000 ntpd[1626]: ----------------------------------------------------
Oct 11 01:04:15 IQ138000 ntpd[1626]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:04:15 IQ138000 ntpd[1626]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:04:15 IQ138000 ntpd[1626]: corporation.  Support and training for ntp-4 are
Oct 11 01:04:15 IQ138000 ntpd[1626]: available at https://www.nwtime.org/support
Oct 11 01:04:15 IQ138000 ntpd[1626]: ----------------------------------------------------
Oct 11 01:04:15 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:04:15 IQ138000 lsyncd[1634]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:04:15 IQ138000 lsyncd[1625]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:04:15 IQ138000 lsyncd[1625]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:04:15 IQ138000 lsyncd[1617]: 01:04:15 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:04:15 IQ138000 ntpd[1656]: proto: precision = 1.041 usec (-20)
Oct 11 01:04:15 IQ138000 ntpd[1656]: basedate set to 2020-09-11
Oct 11 01:04:15 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:04:15 IQ138000 ntpd[1656]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:04:15 IQ138000 persist_meter_data.sh[1652]: Error: No such file or directory
Oct 11 01:04:15 IQ138000 ntpd[1656]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:04:15 IQ138000 ntpd[1656]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:04:15 IQ138000 ntpd[1656]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:04:15 IQ138000 ntpd[1656]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:04:15 IQ138000 ntpd[1656]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:04:15 IQ138000 ntpd[1656]: Listen normally on 3 lo [::1]:123
Oct 11 01:04:15 IQ138000 ntpd[1656]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:04:15 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:04:15 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:04:15 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:04:15 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 01:04:15 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 01:04:15 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:04:15 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:04:15 IQ138000 wb-mqtt-w1[1684]: MQTT broker localhost:1883
Oct 11 01:04:15 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:15 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:04:15 IQ138000 wb-mqtt-w1[1684]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:04:15 IQ138000 wb-mqtt-w1[1684]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:04:15 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:04:15 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:04:15 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:04:15 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:04:15 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:04:15 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:04:15 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:04:15 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:15 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:04:15 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 01:04:15 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:04:15 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:04:16 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:04:16 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:16 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:04:16 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:04:16 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:04:16 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:04:16 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:04:16 IQ138000 vnstatd[1655]: Info: vnStat daemon 2.6 started. (pid:1655 uid:110 gid:117 64-bit)
Oct 11 01:04:16 IQ138000 vnstatd[1655]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:04:16 IQ138000 vnstatd[1655]: Info: Interface "ppp0" disabled.
Oct 11 01:04:16 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:04:16 IQ138000 ntpd[1656]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:04:16 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:04:16 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:04:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:04:16 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:04:16 IQ138000 sshd[1749]: Server listening on 0.0.0.0 port 22.
Oct 11 01:04:16 IQ138000 sshd[1749]: Server listening on :: port 22.
Oct 11 01:04:16 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:04:16 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:04:16 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:04:16 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:04:16 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:04:16 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:04:16 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:16 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:04:16 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:04:16 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:04:16 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:04:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:04:16 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:04:16 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:04:16 IQ138000 NetworkManager[403]: <error> [1760144656.8140] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:04:16 IQ138000 NetworkManager[403]: <info>  [1760144656.8143] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:04:16 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:04:16 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:04:16 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:04:16 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:04:16 IQ138000 reverse-ssh.sh[1868]: Error: No such file or directory
Oct 11 01:04:16 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:17 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:04:17 IQ138000 wb-adjust-systime[1858]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:04:17 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:04:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:04:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:04:17 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:17 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:04:17 IQ138000 wb-adjust-systime[1858]: Drift file is valid (was recently edited)
Oct 11 01:04:17 IQ138000 ntpd[1656]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:04:17 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:04:17 IQ138000 knxd[1906]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:04:17 IQ138000 knxd[1906]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:04:17 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:04:17 IQ138000 mosquitto[1915]: 1760144657: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:04:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.4812] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.4818] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.4823] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.4845] manager: NetworkManager state is now CONNECTING
Oct 11 01:04:17 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.5091] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.5115] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.5117] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:17 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.5942] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.5964] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.5984] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.6003] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.6030] Config: added 'scan_ssid' value '1'
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.6033] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.6035] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:04:17 IQ138000 NetworkManager[403]: <info>  [1760144657.6036] Config: added 'psk' value '<hidden>'
Oct 11 01:04:17 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:04:17 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:04:17 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:04:17 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:04:17 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:04:17 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:04:18 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:04:18 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: MQTT broker localhost:1883
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:04:18 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:18 IQ138000 ntpd[1656]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:04:18 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:04:18 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:04:18 IQ138000 wb-mqtt-knx[2007]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:18 IQ138000 wb-mqtt-knx[2007]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:18 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:18 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:18 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:04:18 IQ138000 wb-mqtt-iec104[1996]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:04:18 IQ138000 wb-mqtt-logs[2019]: MQTT broker localhost:1883
Oct 11 01:04:18 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:18 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: INFO: [sqlite] Create indices if necessary
Oct 11 01:04:18 IQ138000 wb-mqtt-db[1987]: INFO: [sqlite] Analyzing data table
Oct 11 01:04:18 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:04:18 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.536s CPU time.
Oct 11 01:04:19 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:04:19 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:04:19 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:04:19 IQ138000 ntpd[1656]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:04:19 IQ138000 wb-mqtt-iec104[2103]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2057]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 01:04:19 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:04:19 IQ138000 wb-mqtt-mbgate[2028]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:04:19 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:04:19 IQ138000 wb-mqtt-opcua[2143]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:04:19 IQ138000 NetworkManager[403]: <info>  [1760144659.8755] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:04:19 IQ138000 NetworkManager[403]: <info>  [1760144659.8757] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:04:19 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:19 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:19 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:19 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:04:20 IQ138000 wb-mqtt-opcua[2143]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:04:20 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:04:20 IQ138000 wb-mqtt-confed[1973]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:04:20 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio driver] Started
Oct 11 01:04:20 IQ138000 wb-mqtt-confed[1973]: INFO: [wbgo_mqtt] confed-IQ138000-1973: MQTT connection established
Oct 11 01:04:20 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:04:20 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:04:20 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:04:20 IQ138000 wb-mqtt-iec104[2103]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:04:20 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:04:21 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:21 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:04:21 IQ138000 wb-mqtt-knx[2007]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:21 IQ138000 wb-mqtt-knx[2007]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:21 IQ138000 wb-mqtt-knx[2007]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:21 IQ138000 wb-mqtt-knx[2007]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:04:21 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:04:21 IQ138000 wb-mqtt-knx[2007]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:04:23 IQ138000 wpa_supplicant[378]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:04:23 IQ138000 python3[1957]: No data file found at /tmp/network_status_cache.json
Oct 11 01:04:23 IQ138000 python3[1957]: Connecting to MQTT
Oct 11 01:04:23 IQ138000 python3[1957]: Connected to MQTT
Oct 11 01:04:23 IQ138000 python3[1957]: Connection returned result: Connection Accepted.
Oct 11 01:04:24 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2046 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:04:24 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:04:25 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:04:25 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:04:25 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New virtual device lo e65da06e-da6f-4734-bf8b-f97382bf128d /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:04:25 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:04:25 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New active connection lo e65da06e-da6f-4734-bf8b-f97382bf128d /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:04:25 IQ138000 wb-device-manager[1962]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:04:25 IQ138000 wb-device-manager[1962]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:04:25 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:25 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:26 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:04:26 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:04:26 IQ138000 kernel: dldo4: disabling
Oct 11 01:04:27 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:04:27 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:04:27 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:04:27 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:04:27 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: MQTT broker localhost:1883
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:04:27 IQ138000 wb-mqtt-adc[3104]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:04:27 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:04:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:04:27 IQ138000 knxd[3146]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:04:27 IQ138000 knxd[3146]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:04:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:04:27 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:27 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:04:28 IQ138000 wb-mqtt-confed[1973]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-db[1987]: INFO: [sqlite] DB initialization is done
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-gsm[3342]: main: Called from pid 1 (systemd)
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:04:29 IQ138000 wb-gsm[3392]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:04:30 IQ138000 wb-usb-otg-start.sh[3421]: : wb-usb-otg-start
Oct 11 01:04:30 IQ138000 wb-usb-otg-start.sh[3421]: main: setup_device()
Oct 11 01:04:30 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:04:30 IQ138000 wb-gsm[3455]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:04:30 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:04:30 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:04:30 IQ138000 kernel: using random self ethernet address
Oct 11 01:04:30 IQ138000 kernel: using random host ethernet address
Oct 11 01:04:30 IQ138000 wb-usb-otg-start.sh[3421]: main: enabling profile rndis
Oct 11 01:04:30 IQ138000 systemd-udevd[3425]: Using default interface naming scheme 'v247'.
Oct 11 01:04:30 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:04:30 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:04:30 IQ138000 NetworkManager[403]: <info>  [1760144670.4675] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:04:30 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:04:30 IQ138000 NetworkManager[403]: <info>  [1760144670.6337] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:04:30 IQ138000 wb-gsm[3502]: should_enable: Should enable GSM modem
Oct 11 01:04:30 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:04:30 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:30 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:30 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:30 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:04:30 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:04:31 IQ138000 npm[1692]: > zigbee2mqtt@2.1.1 start
Oct 11 01:04:31 IQ138000 npm[1692]: > node index.js
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:04:31 IQ138000 wb-gsm[3580]: main: Called from pid 3504 (wb-gsm-mm)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:04:31 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:04:31 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:04:32 IQ138000 wb-gsm[3612]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:04:32 IQ138000 wb-gsm[3636]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:04:32 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:04:33 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:04:33 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:04:33 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: DB logger started, go to main loop
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:04:33 IQ138000 python3[1957]: Выполнение: service wb-connection-manager stop
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:04:33 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:04:34 IQ138000 wb-mqtt-db[1987]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:04:34 IQ138000 npm[3576]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:04:34 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:04:35 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:04:36 IQ138000 wb-gsm[4000]: mm_off: Modem is already OFF
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:04:36 IQ138000 wb-gsm[4070]: main: Called from pid 3504 (wb-gsm-mm)
Oct 11 01:04:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:37 IQ138000 wb-gsm[4081]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:37 IQ138000 wb-gsm[4104]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:04:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:04:42 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:42 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:42 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:04:42 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:42 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:04:42 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:04:42 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:04:42 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:04:42 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:04:42 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:04:42 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:04:42 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:04:42 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:04:42 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:04:42 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:04:42 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.186s CPU time.
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: MQTT broker localhost:1883
Oct 11 01:04:42 IQ138000 python3[1957]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:04:42 IQ138000 python3[1957]:  
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:04:42 IQ138000 knxd[4504]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:04:42 IQ138000 knxd[4504]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:04:42 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:04:42 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:42 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: w1 thread Started
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:04:42 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <warn>  [1760144682.5262] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <info>  [1760144682.5265] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <info>  [1760144682.5284] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <warn>  [1760144682.5302] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <info>  [1760144682.5315] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:04:42 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <info>  [1760144682.5751] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:04:42 IQ138000 NetworkManager[403]: <info>  [1760144682.5753] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:04:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:44 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:04:44 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:04:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:04:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 8966 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:04:45 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:04:45 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:04:45 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:04:46 IQ138000 NetworkManager[403]: <info>  [1760144686.0918] manager: startup complete
Oct 11 01:04:46 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:04:46 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:04:46 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:46 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:46 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:04:46 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:04:46 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:04:46 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:04:46 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:04:46 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:04:46 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:46 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:04:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:04:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:04:46 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:04:46 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:04:46 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:04:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:04:46 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:04:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:04:46 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:04:46 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:04:46 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:04:47 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:04:47 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:47 IQ138000 watchdog[4628]: starting daemon (5.16):
Oct 11 01:04:47 IQ138000 watchdog[4628]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:04:47 IQ138000 watchdog[4628]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:04:47 IQ138000 watchdog[4628]:  ping: no machine to check
Oct 11 01:04:47 IQ138000 watchdog[4628]:  file: no file to check
Oct 11 01:04:47 IQ138000 watchdog[4628]:  pidfile: /var/run/sshd.pid
Oct 11 01:04:47 IQ138000 watchdog[4628]:  interface: no interface to check
Oct 11 01:04:47 IQ138000 watchdog[4628]:  temperature: no sensors to check
Oct 11 01:04:47 IQ138000 watchdog[4628]:  no test binary files
Oct 11 01:04:47 IQ138000 watchdog[4628]:  no repair binary files
Oct 11 01:04:47 IQ138000 watchdog[4628]:  error retry time-out = 30 seconds
Oct 11 01:04:47 IQ138000 watchdog[4628]:  repair attempts = 1
Oct 11 01:04:47 IQ138000 watchdog[4628]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:04:47 IQ138000 watchdog[4628]: watchdog now set to 120 seconds
Oct 11 01:04:47 IQ138000 watchdog[4628]: hardware watchdog identity: WBEC WDT
Oct 11 01:04:47 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:04:47 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:04:47 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-rules[4583]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:04:47 IQ138000 wb-rules[4583]: INFO: driver is created
Oct 11 01:04:47 IQ138000 wb-rules[4583]: INFO: [wbgo_mqtt] rules-IQ138000-4583: MQTT connection established
Oct 11 01:04:47 IQ138000 wb-rules[4583]: INFO: driver loop is started
Oct 11 01:04:47 IQ138000 wb-rules[4583]: INFO: wait for driver to become ready
Oct 11 01:04:47 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:04:47 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:04:47 IQ138000 systemd[1]: Startup finished in 3.831s (kernel) + 50.929s (userspace) = 54.760s.
Oct 11 01:04:47 IQ138000 python3[1957]: Выполнение: mmcli -m wbc
Oct 11 01:04:47 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:48 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:48 IQ138000 wb-rules[4583]: INFO: driver is ready
Oct 11 01:04:48 IQ138000 wb-rules[4583]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:04:48 IQ138000 wb-rules[4583]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4583: MQTT connection established
Oct 11 01:04:49 IQ138000 wb-rules[4583]: INFO: [engine] Starting sync loop
Oct 11 01:04:49 IQ138000 wb-rules[4583]: INFO: [engine] Starting main loop
Oct 11 01:04:49 IQ138000 wb-rules[4583]: INFO: the engine is ready
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:49 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 wb-rules[4583]: WARNING: [rule warning] DAC: no config file
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:50 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:04:50 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:04:50 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:04:50 IQ138000 NetworkManager[403]: <info>  [1760144690.7931] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:50 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, b2:73:e4:33:b3:c9
Oct 11 01:04:50 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:04:50 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:04:50 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:04:50 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:04:50 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:04:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:04:50 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:04:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:04:50 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:04:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:04:50 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:50 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:50 IQ138000 systemd-udevd[4948]: Using default interface naming scheme 'v247'.
Oct 11 01:04:50 IQ138000 systemd-udevd[4948]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 4 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:51 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:04:52 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:04:52 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 knxd[5003]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:04:52 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:04:52 IQ138000 knxd[5003]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:04:52 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:04:52 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:04:52 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:52 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:53 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:53 IQ138000 wb-rules[4583]: INFO: all rule files are loaded
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:04:53 IQ138000 wb-gsm[5021]: mm_on: Waiting for modem to start
Oct 11 01:04:53 IQ138000 python3[1957]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 01:04:54 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:54 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:04:54 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:55 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:55 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:04:55 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:04:55 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:04:55 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:55 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:55 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:55 IQ138000 npm[3576]: [2025-10-11 01:04:55] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:04:55 IQ138000 npm[3576]: [2025-10-11 01:04:55] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:04:55 IQ138000 npm[3576]: [2025-10-11 01:04:55] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:04:56 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:04:56 IQ138000 npm[3576]: [2025-10-11 01:04:56] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:04:56 IQ138000 npm[3576]: [2025-10-11 01:04:56] info:         zh:zstack:znp: Serialport opened
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:04:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:04:57 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:57 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:57 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:04:57 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:04:57 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:04:58 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:04:58 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:04:58 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:04:58 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:04:58 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:04:58 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:04:59 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: Currently 4 devices are joined.
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:05:00 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:05:00.466+00:00
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:05:00.466Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144880478,"cmd_timestamp_ms":1760144700478,"source":"schedule"}
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144880478,"cmd_timestamp_ms":1760144700478,"source":"schedule"}
Oct 11 01:05:00 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m: Connected to MQTT server
Oct 11 01:05:00 IQ138000 npm[3576]: [2025-10-11 01:05:00] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:05:00.805+00:00
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:05:00.805Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144880819,"cmd_timestamp_ms":1760144700819,"source":"schedule"}
Oct 11 01:05:00 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760144880819,"cmd_timestamp_ms":1760144700819,"source":"schedule"}
Oct 11 01:05:00 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:05:00 IQ138000 wb-rules[4583]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:05:00 IQ138000 wb-rules[4583]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:05:00 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:00 IQ138000 wb-rules[4583]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:05:00 IQ138000 wb-rules[4583]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:05:01 IQ138000 npm[3576]: [2025-10-11 01:05:01] info:         z2m: Started frontend on port 8282
Oct 11 01:05:01 IQ138000 npm[3576]: [2025-10-11 01:05:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:01 IQ138000 npm[3576]: [2025-10-11 01:05:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:05:01 IQ138000 npm[3576]: [2025-10-11 01:05:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:05:01 IQ138000 npm[3576]: [2025-10-11 01:05:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:05:01 IQ138000 npm[3576]: [2025-10-11 01:05:01] info:         z2m: Zigbee2MQTT started!
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:05:01.309+00:00
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:05:01.309Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881321,"cmd_timestamp_ms":1760144701321,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881321,"cmd_timestamp_ms":1760144701321,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:05:01.337+00:00
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:05:01.337Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881350,"cmd_timestamp_ms":1760144701350,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881350,"cmd_timestamp_ms":1760144701350,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:05:01.434+00:00
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:05:01.434Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881445,"cmd_timestamp_ms":1760144701445,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881445,"cmd_timestamp_ms":1760144701445,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:05:01.578+00:00
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:05:01.578Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881593,"cmd_timestamp_ms":1760144701593,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881593,"cmd_timestamp_ms":1760144701593,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:05:01 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:05:01.768+00:00
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:05:01 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:05:01.768Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881803,"cmd_timestamp_ms":1760144701803,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881803,"cmd_timestamp_ms":1760144701803,"source":"schedule"}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:05:01.979+00:00
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:05:01.979Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:05:01 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881997,"cmd_timestamp_ms":1760144701997,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760144881997,"cmd_timestamp_ms":1760144701997,"source":"schedule"}
Oct 11 01:05:02 IQ138000 CRON[5179]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 01:05:02 IQ138000 CRON[5187]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 01:05:02 IQ138000 CRON[5179]: pam_unix(cron:session): session closed for user root
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:05:02.487+00:00
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:05:02.487Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144882499,"cmd_timestamp_ms":1760144702499,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144882499,"cmd_timestamp_ms":1760144702499,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:05:02.653+00:00
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:05:02.653Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144882669,"cmd_timestamp_ms":1760144702669,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144882669,"cmd_timestamp_ms":1760144702669,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:02 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:05:02 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:05:02 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 knxd[5215]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:05:02 IQ138000 knxd[5215]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:05:02 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:05:02 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:05:02 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:05:02.811+00:00
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:05:02.811Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144882827,"cmd_timestamp_ms":1760144702827,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760144882827,"cmd_timestamp_ms":1760144702827,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:05:02.942+00:00
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:05:02.942Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144882955,"cmd_timestamp_ms":1760144702955,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144882955,"cmd_timestamp_ms":1760144702955,"source":"schedule"}
Oct 11 01:05:02 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:05:03 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:05:03.127+00:00
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:05:03.127Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144883137,"cmd_timestamp_ms":1760144703137,"source":"schedule"}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760144883137,"cmd_timestamp_ms":1760144703137,"source":"schedule"}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:05:03.272+00:00
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:05:03.272Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:05:03 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144883287,"cmd_timestamp_ms":1760144703287,"source":"schedule"}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144883287,"cmd_timestamp_ms":1760144703287,"source":"schedule"}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:05:03.430+00:00
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:05:03.430Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144883440,"cmd_timestamp_ms":1760144703440,"source":"schedule"}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760144883440,"cmd_timestamp_ms":1760144703440,"source":"schedule"}
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:05:03 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:05:03 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:05:04 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:05:04 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:05:04 IQ138000 wb-watchdog[5270]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:05:04 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:05:04 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:05:04 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:05:04 IQ138000 wb-rules[4583]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:05:04 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:04 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:05:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:05:04 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:05:05 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:05:05 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:05:05 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:05 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:05:05 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:05:05 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:05:05 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:06 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:05:06 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:05:06 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:06 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:05:07 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:08 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:08 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:08 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:09 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:10 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:10 IQ138000 ModemManager[468]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:05:10 IQ138000 ModemManager[468]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 01:05:11 IQ138000 ModemManager[468]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:05:11 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:11 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:11 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:05:11 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:11 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:05:12 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:05:12 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:05:12 IQ138000 python3[1957]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:05:12 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:05:12 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:05:12 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:12 IQ138000 ModemManager[468]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7604] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7626] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7648] device (ttyUSB1): modem state 'enabling'
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7677] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7714] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7746] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7753] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:12 IQ138000 NetworkManager[403]: <info>  [1760144712.7773] manager: NetworkManager state is now CONNECTING
Oct 11 01:05:12 IQ138000 ModemManager[468]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 01:05:12 IQ138000 wb-mqtt-nm-helper[2046]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:05:12 IQ138000 ModemManager[468]: <info>  [modem0] power state updated: on
Oct 11 01:05:12 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:12 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 01:05:12 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:05:13 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:05:13 IQ138000 knxd[5398]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:05:13 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:05:13 IQ138000 knxd[5398]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:05:13 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:05:13 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:05:13 IQ138000 python3[1957]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:05:13 IQ138000 python3[1957]:    --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:05:13 IQ138000 python3[1957]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:05:13 IQ138000 python3[1957]:            |                model: A7602E-H
Oct 11 01:05:13 IQ138000 python3[1957]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:05:13 IQ138000 python3[1957]:            |            supported: gsm-umts
Oct 11 01:05:13 IQ138000 python3[1957]:            |              current: gsm-umts
Oct 11 01:05:13 IQ138000 python3[1957]:            |         equipment id: 860803062234204
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   System   |               device: wbc
Oct 11 01:05:13 IQ138000 python3[1957]:            |              drivers: option, rndis_host
Oct 11 01:05:13 IQ138000 python3[1957]:            |               plugin: simtech
Oct 11 01:05:13 IQ138000 python3[1957]:            |         primary port: ttyUSB1
Oct 11 01:05:13 IQ138000 python3[1957]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:05:13 IQ138000 python3[1957]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:05:13 IQ138000 python3[1957]:            |                state: enabling
Oct 11 01:05:13 IQ138000 python3[1957]:            |          power state: on
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:05:13 IQ138000 python3[1957]:            |              current: allowed: any; preferred: none
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   3GPP     |                 imei: 860803062234204
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:05:13 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:13 IQ138000 python3[1957]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:13 IQ138000 python3[1957]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:05:13 IQ138000 python3[1957]:            |                       slot 2: none
Oct 11 01:05:13 IQ138000 python3[1957]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:05:13 IQ138000 python3[1957]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:05:13 IQ138000 python3[1957]:  successfully requested primary SIM switch in modem
Oct 11 01:05:15 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:05:15 IQ138000 wb-rules[4583]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:05:15 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:05:15 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:05:15 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:05:16 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:05:16 IQ138000 lsyncd[5433]: 01:05:16 Normal: --- Startup ---
Oct 11 01:05:16 IQ138000 lsyncd[5433]: 01:05:16 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:05:16 IQ138000 lsyncd[5433]: messages
Oct 11 01:05:16 IQ138000 lsyncd[5433]: journal
Oct 11 01:05:16 IQ138000 lsyncd[5433]: iq_network_manager/iq_network_manager.log
Oct 11 01:05:16 IQ138000 lsyncd[5435]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:05:16 IQ138000 lsyncd[5434]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:05:16 IQ138000 lsyncd[5434]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:05:16 IQ138000 lsyncd[5433]: 01:05:16 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:05:16 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:05:16 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:05:16 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:16 IQ138000 ModemManager[468]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 01:05:16 IQ138000 ModemManager[468]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 01:05:16 IQ138000 ModemManager[468]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 01:05:16 IQ138000 ModemManager[468]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] simple connect started...
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (6/10): register
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 01:05:17 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 01:05:17 IQ138000 NetworkManager[403]: <info>  [1760144717.3171] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:17 IQ138000 NetworkManager[403]: <info>  [1760144717.3183] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:05:17 IQ138000 NetworkManager[403]: <info>  [1760144717.3226] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 01:05:17 IQ138000 NetworkManager[403]: <info>  [1760144717.3252] ppp-manager: starting PPP connection
Oct 11 01:05:17 IQ138000 NetworkManager[403]: <info>  [1760144717.3382] ppp-manager: pppd started with pid 5445
Oct 11 01:05:17 IQ138000 pppd[5445]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:05:17 IQ138000 NetworkManager[5445]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: initializing
Oct 11 01:05:17 IQ138000 pppd[5445]: pppd 2.4.9 started by root, uid 0
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:05:17 IQ138000 pppd[5445]: Using interface ppp0
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:05:17 IQ138000 NetworkManager[5445]: Using interface ppp0
Oct 11 01:05:17 IQ138000 NetworkManager[5445]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:05:17 IQ138000 pppd[5445]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:05:17 IQ138000 NetworkManager[403]: <info>  [1760144717.4055] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:05:17 IQ138000 pppd[5445]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:05:17 IQ138000 NetworkManager[5445]: PAP authentication succeeded
Oct 11 01:05:17 IQ138000 NetworkManager[5445]: kernel does not support PPP filtering
Oct 11 01:05:17 IQ138000 pppd[5445]: PAP authentication succeeded
Oct 11 01:05:17 IQ138000 pppd[5445]: kernel does not support PPP filtering
Oct 11 01:05:17 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 01:05:17 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 01:05:17 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:05:17 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:05:17 IQ138000 ModemManager[468]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 01:05:17 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:17 IQ138000 wb-rules[4583]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:05:18 IQ138000 pppd[5445]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:05:18 IQ138000 NetworkManager[5445]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:05:18 IQ138000 pppd[5445]: local  IP address 10.2.191.105
Oct 11 01:05:18 IQ138000 pppd[5445]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:05:18 IQ138000 NetworkManager[5445]: local  IP address 10.2.191.105
Oct 11 01:05:18 IQ138000 NetworkManager[5445]: remote IP address 10.64.64.64
Oct 11 01:05:18 IQ138000 NetworkManager[5445]: primary   DNS address 172.23.10.130
Oct 11 01:05:18 IQ138000 NetworkManager[5445]: secondary DNS address 172.23.10.131
Oct 11 01:05:18 IQ138000 pppd[5445]: remote IP address 10.64.64.64
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.0275] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:05:18 IQ138000 pppd[5445]: primary   DNS address 172.23.10.130
Oct 11 01:05:18 IQ138000 pppd[5445]: secondary DNS address 172.23.10.131
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.0327] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:05:18 IQ138000 pppd[5445]: nm-ppp-plugin: ip-up event
Oct 11 01:05:18 IQ138000 pppd[5445]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.0483] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.0512] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.0620] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:05:18 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:05:18 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.1082] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:18 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:05:18 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:05:18 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:05:18 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.2098] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.2110] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.2131] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.2150] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:05:18 IQ138000 NetworkManager[403]: <info>  [1760144718.2180] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:05:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:05:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 ntpd[1656]: Listen normally on 4 ppp0 10.2.191.105:123
Oct 11 01:05:19 IQ138000 ntpd[1656]: new interface(s) found: waking up resolver
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:05:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:05:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:20 IQ138000 vnstatd[1655]: Info: Interface "ppp0" enabled.
Oct 11 01:05:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:05:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:05:22 IQ138000 ntpd[1656]: Soliciting pool server 37.9.13.54
Oct 11 01:05:22 IQ138000 ntpd[1656]: Soliciting pool server 45.141.102.99
Oct 11 01:05:23 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 01:05:23 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:05:23 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:05:23 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:05:23 IQ138000 wb-mqtt-knx[2007]: INFO: knxd connected successfully
Oct 11 01:05:23 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.22
Oct 11 01:05:23 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.21
Oct 11 01:05:23 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.1
Oct 11 01:05:23 IQ138000 ntpd[1656]: Soliciting pool server 51.250.35.68
Oct 11 01:05:23 IQ138000 python3[1957]: Выполнение: mmcli -i any
Oct 11 01:05:23 IQ138000 python3[1957]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 01:05:23 IQ138000 python3[1957]:    -------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:23 IQ138000 python3[1957]:   -------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Properties |            active: yes
Oct 11 01:05:23 IQ138000 python3[1957]:              |              imsi: 250997340491874
Oct 11 01:05:23 IQ138000 python3[1957]:              |             iccid: 8970199210429593744
Oct 11 01:05:23 IQ138000 python3[1957]:              |       operator id: 25099
Oct 11 01:05:23 IQ138000 python3[1957]:              |     operator name: Beeline
Oct 11 01:05:23 IQ138000 python3[1957]: Выполнение: mmcli -m wbc
Oct 11 01:05:23 IQ138000 python3[1957]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:05:23 IQ138000 python3[1957]:    --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:05:23 IQ138000 python3[1957]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:05:23 IQ138000 python3[1957]:            |                model: A7602E-H
Oct 11 01:05:23 IQ138000 python3[1957]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:05:23 IQ138000 python3[1957]:            |            supported: gsm-umts
Oct 11 01:05:23 IQ138000 python3[1957]:            |              current: gsm-umts
Oct 11 01:05:23 IQ138000 python3[1957]:            |         equipment id: 860803062234204
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   System   |               device: wbc
Oct 11 01:05:23 IQ138000 python3[1957]:            |              drivers: option, rndis_host
Oct 11 01:05:23 IQ138000 python3[1957]:            |               plugin: simtech
Oct 11 01:05:23 IQ138000 python3[1957]:            |         primary port: ttyUSB1
Oct 11 01:05:23 IQ138000 python3[1957]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:05:23 IQ138000 python3[1957]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:05:23 IQ138000 python3[1957]:            |                state: connected
Oct 11 01:05:23 IQ138000 python3[1957]:            |          power state: on
Oct 11 01:05:23 IQ138000 python3[1957]:            |          access tech: lte
Oct 11 01:05:23 IQ138000 python3[1957]:            |       signal quality: 93% (recent)
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:05:23 IQ138000 python3[1957]:            |              current: allowed: any; preferred: none
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   3GPP     |                 imei: 860803062234204
Oct 11 01:05:23 IQ138000 python3[1957]:            |          operator id: 25099
Oct 11 01:05:23 IQ138000 python3[1957]:            |        operator name: beeline
Oct 11 01:05:23 IQ138000 python3[1957]:            |         registration: home
Oct 11 01:05:23 IQ138000 python3[1957]:            | packet service state: attached
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:23 IQ138000 python3[1957]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:05:23 IQ138000 python3[1957]:            |                       slot 2: none
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:05:23 IQ138000 python3[1957]: Current state: home
Oct 11 01:05:23 IQ138000 python3[1957]: SIM registered in the network.
Oct 11 01:05:23 IQ138000 python3[1957]: Выполнение: mmcli -m wbc
Oct 11 01:05:23 IQ138000 python3[1957]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:05:23 IQ138000 python3[1957]:    --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:05:23 IQ138000 python3[1957]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:05:23 IQ138000 python3[1957]:            |                model: A7602E-H
Oct 11 01:05:23 IQ138000 python3[1957]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:05:23 IQ138000 python3[1957]:            |            supported: gsm-umts
Oct 11 01:05:23 IQ138000 python3[1957]:            |              current: gsm-umts
Oct 11 01:05:23 IQ138000 python3[1957]:            |         equipment id: 860803062234204
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   System   |               device: wbc
Oct 11 01:05:23 IQ138000 python3[1957]:            |              drivers: option, rndis_host
Oct 11 01:05:23 IQ138000 python3[1957]:            |               plugin: simtech
Oct 11 01:05:23 IQ138000 python3[1957]:            |         primary port: ttyUSB1
Oct 11 01:05:23 IQ138000 python3[1957]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:05:23 IQ138000 python3[1957]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:05:23 IQ138000 python3[1957]:            |                state: connected
Oct 11 01:05:23 IQ138000 python3[1957]:            |          power state: on
Oct 11 01:05:23 IQ138000 python3[1957]:            |          access tech: lte
Oct 11 01:05:23 IQ138000 python3[1957]:            |       signal quality: 93% (recent)
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:05:23 IQ138000 python3[1957]:            |              current: allowed: any; preferred: none
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   3GPP     |                 imei: 860803062234204
Oct 11 01:05:23 IQ138000 python3[1957]:            |          operator id: 25099
Oct 11 01:05:23 IQ138000 python3[1957]:            |        operator name: beeline
Oct 11 01:05:23 IQ138000 python3[1957]:            |         registration: home
Oct 11 01:05:23 IQ138000 python3[1957]:            | packet service state: attached
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:23 IQ138000 python3[1957]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:05:23 IQ138000 python3[1957]:            |                       slot 2: none
Oct 11 01:05:23 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:05:23 IQ138000 python3[1957]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:23 IQ138000 python3[1957]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:05:23 IQ138000 python3[1957]:    -------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:23 IQ138000 python3[1957]:   -------------------------------
Oct 11 01:05:23 IQ138000 python3[1957]:   Properties |            active: yes
Oct 11 01:05:23 IQ138000 python3[1957]:              |              imsi: 250997340491874
Oct 11 01:05:23 IQ138000 python3[1957]:              |             iccid: 8970199210429593744
Oct 11 01:05:23 IQ138000 python3[1957]:              |       operator id: 25099
Oct 11 01:05:23 IQ138000 python3[1957]:              |     operator name: Beeline
Oct 11 01:05:24 IQ138000 ntpd[1656]: Soliciting pool server 87.103.245.205
Oct 11 01:05:24 IQ138000 ntpd[1656]: Soliciting pool server 51.250.68.198
Oct 11 01:05:24 IQ138000 ntpd[1656]: Soliciting pool server 89.223.121.15
Oct 11 01:05:24 IQ138000 ntpd[1656]: Soliciting pool server 82.146.53.58
Oct 11 01:05:24 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:05:24 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:05:24 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:05:24 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:05:25 IQ138000 ntpd[1656]: Soliciting pool server 93.191.12.44
Oct 11 01:05:25 IQ138000 ntpd[1656]: Soliciting pool server 91.197.207.24
Oct 11 01:05:25 IQ138000 ntpd[1656]: Soliciting pool server 162.159.200.1
Oct 11 01:05:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:26 IQ138000 ntpd[1656]: Soliciting pool server 193.106.93.116
Oct 11 01:05:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:05:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:27 IQ138000 ntpd[1656]: Soliciting pool server 2a02:6bf:f000:1:2::2
Oct 11 01:05:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:05:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:05:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:05:28 IQ138000 python3[1957]: Выполнение: mmcli -m wbc
Oct 11 01:05:28 IQ138000 python3[1957]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:05:28 IQ138000 python3[1957]:    --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:05:28 IQ138000 python3[1957]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:05:28 IQ138000 python3[1957]:            |                model: A7602E-H
Oct 11 01:05:28 IQ138000 python3[1957]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:05:28 IQ138000 python3[1957]:            |            supported: gsm-umts
Oct 11 01:05:28 IQ138000 python3[1957]:            |              current: gsm-umts
Oct 11 01:05:28 IQ138000 python3[1957]:            |         equipment id: 860803062234204
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   System   |               device: wbc
Oct 11 01:05:28 IQ138000 python3[1957]:            |              drivers: option, rndis_host
Oct 11 01:05:28 IQ138000 python3[1957]:            |               plugin: simtech
Oct 11 01:05:28 IQ138000 python3[1957]:            |         primary port: ttyUSB1
Oct 11 01:05:28 IQ138000 python3[1957]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:05:28 IQ138000 python3[1957]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:05:28 IQ138000 python3[1957]:            |                state: connected
Oct 11 01:05:28 IQ138000 python3[1957]:            |          power state: on
Oct 11 01:05:28 IQ138000 python3[1957]:            |          access tech: lte
Oct 11 01:05:28 IQ138000 python3[1957]:            |       signal quality: 93% (recent)
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:05:28 IQ138000 python3[1957]:            |              current: allowed: any; preferred: none
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   3GPP     |                 imei: 860803062234204
Oct 11 01:05:28 IQ138000 python3[1957]:            |          operator id: 25099
Oct 11 01:05:28 IQ138000 python3[1957]:            |        operator name: beeline
Oct 11 01:05:28 IQ138000 python3[1957]:            |         registration: home
Oct 11 01:05:28 IQ138000 python3[1957]:            | packet service state: attached
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:28 IQ138000 python3[1957]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:05:28 IQ138000 python3[1957]:            |                       slot 2: none
Oct 11 01:05:28 IQ138000 python3[1957]:   --------------------------------
Oct 11 01:05:28 IQ138000 python3[1957]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:05:28 IQ138000 python3[1957]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:29 IQ138000 python3[1957]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:05:29 IQ138000 python3[1957]:    -------------------------------
Oct 11 01:05:29 IQ138000 python3[1957]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:05:29 IQ138000 python3[1957]:   -------------------------------
Oct 11 01:05:29 IQ138000 python3[1957]:   Properties |            active: yes
Oct 11 01:05:29 IQ138000 python3[1957]:              |              imsi: 250997340491874
Oct 11 01:05:29 IQ138000 python3[1957]:              |             iccid: 8970199210429593744
Oct 11 01:05:29 IQ138000 python3[1957]:              |       operator id: 25099
Oct 11 01:05:29 IQ138000 python3[1957]:              |     operator name: Beeline
Oct 11 01:05:29 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:05:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:05:30 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:05:30 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
-- Boot 804e24fd542d457cb85688aaaa9a0582 --
Oct 11 01:09:03 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:09:03 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:09:03 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:09:03 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:09:03 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:09:03 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:09:03 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:09:03 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:09:03 IQ138000 kernel: Zone ranges:
Oct 11 01:09:03 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:09:03 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:09:03 IQ138000 kernel: Movable zone start for each node
Oct 11 01:09:03 IQ138000 kernel: Early memory node ranges
Oct 11 01:09:03 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:09:03 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:09:03 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:09:03 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:09:03 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:09:03 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:09:03 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:09:03 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:09:03 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:09:03 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:09:03 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:09:03 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:09:03 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:09:03 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:09:03 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:09:03 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:09:03 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:09:03 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:09:03 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:09:03 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:09:03 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:09:03 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:09:03 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:09:03 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:09:03 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:09:03 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:09:03 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:09:03 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:09:03 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:09:03 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:09:03 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:09:03 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:09:03 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:09:03 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:09:03 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:09:03 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:09:03 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:09:03 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:09:03 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:09:03 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:09:03 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:09:03 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:09:03 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:09:03 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:09:03 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:09:03 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:09:03 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:09:03 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:09:03 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:09:03 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:09:03 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:09:03 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:09:03 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:09:03 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:09:03 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:09:03 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:09:03 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:09:03 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:09:03 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:09:03 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:09:03 IQ138000 kernel: No ATAGs?
Oct 11 01:09:03 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:09:03 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:09:03 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:09:03 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:09:03 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:09:03 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:09:03 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:09:03 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:09:03 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:09:03 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:09:03 IQ138000 kernel: PTP clock support registered
Oct 11 01:09:03 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:09:03 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:09:03 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:09:03 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:09:03 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:09:03 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:09:03 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:09:03 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:09:03 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:09:03 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:09:03 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:09:03 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:09:03 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:09:03 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:09:03 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:09:03 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:09:03 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:09:03 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:09:03 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:09:03 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:09:03 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:09:03 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:09:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:09:03 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:09:03 IQ138000 kernel: brd: module loaded
Oct 11 01:09:03 IQ138000 kernel: loop: module loaded
Oct 11 01:09:03 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:09:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:09:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:09:03 IQ138000 kernel: CAN device driver interface
Oct 11 01:09:03 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:09:03 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:09:03 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:09:03 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:09:03 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:09:03 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:09:03 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:09:03 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:09:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:09:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:09:03 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:09:03 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:09:03 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:09:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:09:03 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:09:03 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:09:03 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:09:03 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:09:03 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:09:03 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:09:03 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:09:03 IQ138000 kernel: can: controller area network core
Oct 11 01:09:03 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:09:03 IQ138000 kernel: can: raw protocol
Oct 11 01:09:03 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:09:03 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:09:03 IQ138000 kernel: can: SAE J1939
Oct 11 01:09:03 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:09:03 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:09:03 IQ138000 kernel: registered taskstats version 1
Oct 11 01:09:03 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:09:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:09:03 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:09:03 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:09:03 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:09:03 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:09:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:09:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:09:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:08:59 UTC (1760144939)
Oct 11 01:09:03 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:09:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:09:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:09:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:09:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:09:03 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:09:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:09:03 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:09:03 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:09:03 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:09:03 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:09:03 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:09:03 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:09:03 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:09:03 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: random: fast init done
Oct 11 01:09:03 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:09:03 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:09:03 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:09:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:09:03 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:09:03 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:09:03 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:09:03 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:09:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:09:03 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:09:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:09:03 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:09:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:09:03 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:09:03 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:09:03 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:09:03 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:09:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:09:03 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:09:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:09:03 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:09:03 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:09:03 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:09:03 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:09:03 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:09:03 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:09:03 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:09:03 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:09:03 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:09:03 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:09:03 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:09:03 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:09:03 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:09:03 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:09:03 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:09:03 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:09:03 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:09:03 IQ138000 kernel: of_cfs_init
Oct 11 01:09:03 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:09:03 IQ138000 kernel: ALSA device list:
Oct 11 01:09:03 IQ138000 kernel:   No soundcards found.
Oct 11 01:09:03 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:09:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:09:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:09:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:09:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:09:03 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:09:03 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:09:03 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:09:03 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:09:03 IQ138000 kernel:   with arguments:
Oct 11 01:09:03 IQ138000 kernel:     /sbin/init
Oct 11 01:09:03 IQ138000 kernel:   with environment:
Oct 11 01:09:03 IQ138000 kernel:     HOME=/
Oct 11 01:09:03 IQ138000 kernel:     TERM=linux
Oct 11 01:09:03 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:09:03 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:09:03 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:09:03 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:09:03 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:09:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:09:03 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:09:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:09:03 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:09:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:09:03 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:09:03 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:09:03 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:09:03 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:09:03 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:09:03 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:09:03 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:09:03 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:09:03 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:09:03 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:09:03 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:09:03 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:09:03 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:09:03 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:09:03 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:09:03 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:09:03 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:09:03 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:09:03 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:09:03 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:09:03 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:09:03 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:09:03 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:09:03 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:09:03 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:09:03 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:09:03 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:09:03 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:09:03 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:09:03 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:09:03 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:09:03 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:09:03 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:09:03 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:09:03 IQ138000 systemd-journald[138]: Journal started
Oct 11 01:09:03 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:09:03 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 01:09:03 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:09:03 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:09:03 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:09:03 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:09:03 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:09:03 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:09:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:09:03 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:09:03 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:09:04 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:09:04 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:09:04 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:09:04 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:09:04 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:09:04 IQ138000 systemd-random-seed[150]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:09:04 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:09:04 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:09:04 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:09:04 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:09:04 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:09:04 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:09:04 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:09:04 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:09:04 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:09:04 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:09:04 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:09:04 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:09:05 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 01:09:05 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:09:05 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:09:05 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:09:05 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:09:05 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:09:05 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:09:05 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:09:05 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:09:05 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:09:05 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:09:05 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 systemd-udevd[165]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:09:05 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:09:05 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:09:05 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:09:05 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:09:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:09:05 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:09:05 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:09:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:09:05 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:09:06 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:09:06 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:09:06 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:09:06 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:09:06 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:09:06 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:09:06 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:09:06 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:09:06 IQ138000 systemd-fsck[203]: data: recovering journal
Oct 11 01:09:06 IQ138000 systemd-fsck[203]: data: clean, 16440/328656 files, 372571/1313536 blocks
Oct 11 01:09:06 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:09:06 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:09:06 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:09:06 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:09:06 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:09:06 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:09:06 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:09:06 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:09:06 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:09:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:09:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:09:06 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:09:06 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 01:09:06 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:09:06 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 01:09:06 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:09:06 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:09:06 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:09:06 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:09:06 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:09:06 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:09:06 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:09:06 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:09:06 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:09:06 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:09:06 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:09:06 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:09:06 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:09:06 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:09:06 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:09:07 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.863ms for 460 entries.
Oct 11 01:09:07 IQ138000 systemd-journald[138]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 502.4M, max 496.6M, 0B free.
Oct 11 01:09:07 IQ138000 kernel: random: crng init done
Oct 11 01:09:07 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:09:07 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:09:07 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 01:09:07 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:09:07 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:09:07 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:09:07 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:09:07 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:09:07 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:09:07 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:09:08 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:09:08 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:09:08 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:09:08 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:09:08 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:09:08 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:09:08 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:09:08 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:09:08 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:09:08 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:09:08 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:09:08 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:09:08 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:09:08 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:09:08 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:09:08 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:09:08 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:09:08 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:09:08 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:09:08 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:09:08 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:09:08 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:09:08 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:09:08 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:09:08 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 01:09:08 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:09:08 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:09:08 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 01:09:08 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:09:08 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:09:08 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:09:08 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:09:08 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:09:08 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 01:09:08 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:09:08 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:09:08 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:09:08 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 01:09:09 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:09:09 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:09:09 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:09:09 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:09:09 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:09:09 IQ138000 migrate.sh[324]: Error: No such file or directory
Oct 11 01:09:09 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:09:09 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:09:09 IQ138000 migrate.sh[332]: Error: No such file or directory
Oct 11 01:09:09 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:09:09 IQ138000 reverse-ssh.sh[343]: Error: No such file or directory
Oct 11 01:09:09 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:09:09 IQ138000 migrate.sh[347]: Error: No such file or directory
Oct 11 01:09:09 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:09:09 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:09:09 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:09:09 IQ138000 migrate.sh[358]: Error: No such file or directory
Oct 11 01:09:09 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:09:09 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:09:09 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:09:09 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:09:09 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Successfully dropped root privileges.
Oct 11 01:09:09 IQ138000 rules-preprocessor[339]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:09:09 IQ138000 rules-preprocessor[339]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:09:09 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: avahi-daemon 0.8 starting up.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Successfully called chroot().
Oct 11 01:09:09 IQ138000 migrate.sh[371]: Error: No such file or directory
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Successfully dropped remaining capabilities.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: No service file found in /etc/avahi/services.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Network interface enumeration completed.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Registering new address record for ::1 on lo.*.
Oct 11 01:09:09 IQ138000 avahi-daemon[365]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:09:09 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:09:09 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 01:09:09 IQ138000 systemd-logind[346]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:09:09 IQ138000 wpa_supplicant[379]: Successfully initialized wpa_supplicant
Oct 11 01:09:09 IQ138000 systemd-logind[346]: New seat seat0.
Oct 11 01:09:09 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:09:09 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:09:09 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 01:09:09 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:09:09 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:09:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:09:09 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:09:09 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:09:09 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:09 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:09:09 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:09:09 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:09:09 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:09:09 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:09:09 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:09 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:09:09 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:09:10 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:09:10 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:09:10 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:09:10 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:09:10 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:09:10 IQ138000 NetworkManager[404]: <info>  [1760144950.1616] NetworkManager (version 1.42.4) is starting... (boot:804e24fd-542d-457c-b856-88aaaa9a0582)
Oct 11 01:09:10 IQ138000 NetworkManager[404]: <info>  [1760144950.1620] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:09:10 IQ138000 NetworkManager[404]: <info>  [1760144950.1735] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:09:10 IQ138000 NetworkManager[404]: <info>  [1760144950.2124] manager[0x746900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:09:10 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:09:10 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:09:10 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:09:10 IQ138000 monit[323]: Starting daemon monitor: monit.
Oct 11 01:09:10 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:09:10 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:09:10 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:09:10 IQ138000 avahi-daemon[365]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3396397000.
Oct 11 01:09:10 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:09:10 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:09:10 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:09:10 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:09:10 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:09:10 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:09:10 IQ138000 ModemManager[485]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:09:10 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:09:10 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:09:10 IQ138000 NetworkManager[404]: <info>  [1760144950.9954] hostname: hostname: using hostnamed
Oct 11 01:09:10 IQ138000 NetworkManager[404]: <info>  [1760144950.9957] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0003] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0139] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0196] manager[0x746900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0199] manager[0x746900]: rfkill: WWAN hardware radio set enabled
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0560] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0656] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0717] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.0969] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1068] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1122] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:09:11 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:09:11 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1164] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1180] manager: Networking is enabled by state file
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1238] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1241] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1243] ifupdown: management mode: unmanaged
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1244] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1246] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:09:11 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1853] dhcp: init: Using DHCP client 'internal'
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1878] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.1986] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.2025] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.2179] device (lo): Activation: starting connection 'lo' (da58e95d-a5c4-4987-89fa-eba4f3c671c5)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.2323] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.2392] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:11 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:09:11 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.6100] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.6123] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.6171] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.6251] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:09:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:09:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:09:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:09:11 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:09:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.8499] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.8576] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.8636] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:09:11 IQ138000 NetworkManager[404]: <info>  [1760144951.8663] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.6842] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.6882] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.6910] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.7503] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.7551] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.7578] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.7675] modem-manager: ModemManager available
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.7687] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.8207] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.8233] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:09:12 IQ138000 NetworkManager[404]: <info>  [1760144952.8313] device (lo): Activation: successful, device activated.
Oct 11 01:09:12 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.0837] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.0844] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.0865] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.0883] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.0912] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.0992] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.1232] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.1238] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.1263] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.1282] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.1319] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:09:13 IQ138000 NetworkManager[404]: <info>  [1760144953.1459] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:13 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:09:13 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:09:13 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:09:16 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:09:16 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 01:09:16 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:16 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:09:16 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:09:17 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:09:17 IQ138000 init.sh[1393]: In file included from -:11:
Oct 11 01:09:17 IQ138000 init.sh[1393]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:17 IQ138000 init.sh[1319]: ...
Oct 11 01:09:17 IQ138000 init.sh[1408]: In file included from -:11:
Oct 11 01:09:17 IQ138000 init.sh[1408]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:17 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 01:09:17 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 01:09:17 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:09:17 IQ138000 init.sh[1428]: In file included from -:24:
Oct 11 01:09:17 IQ138000 init.sh[1428]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:18 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:09:18 IQ138000 init.sh[1319]: ...
Oct 11 01:09:18 IQ138000 init.sh[1443]: In file included from -:24:
Oct 11 01:09:18 IQ138000 init.sh[1443]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:18 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 01:09:18 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 01:09:18 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:09:18 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 01:09:18 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:18 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:09:18 IQ138000 init.sh[1489]: In file included from -:11:
Oct 11 01:09:18 IQ138000 init.sh[1489]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:09:19 IQ138000 init.sh[1319]: ...
Oct 11 01:09:19 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:09:19 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:09:19 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:09:19 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:09:19 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:09:19 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:09:19 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:09:19 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:09:19 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:09:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:09:19 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:09:19 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:09:19 IQ138000 lsyncd[1614]: 01:09:19 Normal: --- Startup ---
Oct 11 01:09:19 IQ138000 lsyncd[1614]: 01:09:19 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:09:19 IQ138000 lsyncd[1614]: messages
Oct 11 01:09:19 IQ138000 lsyncd[1614]: iq_network_manager/iq_network_manager.log
Oct 11 01:09:19 IQ138000 lsyncd[1614]: journal
Oct 11 01:09:19 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:09:19 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:09:19 IQ138000 knxd[1607]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:09:19 IQ138000 knxd[1607]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:09:19 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:09:19 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:09:20 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:09:20 IQ138000 lsyncd[1624]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:09:20 IQ138000 ntpd[1620]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:09:20 IQ138000 ntpd[1620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:09:20 IQ138000 lsyncd[1617]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:09:20 IQ138000 lsyncd[1617]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:09:20 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 01:09:20 IQ138000 lsyncd[1614]: 01:09:20 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:09:20 IQ138000 ntpd[1620]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:09:20 IQ138000 ntpd[1620]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:09:20 IQ138000 ntpd[1620]: corporation.  Support and training for ntp-4 are
Oct 11 01:09:20 IQ138000 ntpd[1620]: available at https://www.nwtime.org/support
Oct 11 01:09:20 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 01:09:20 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:09:20 IQ138000 persist_meter_data.sh[1639]: Error: No such file or directory
Oct 11 01:09:20 IQ138000 ntpd[1644]: proto: precision = 2.125 usec (-19)
Oct 11 01:09:20 IQ138000 ntpd[1644]: basedate set to 2020-09-11
Oct 11 01:09:20 IQ138000 ntpd[1644]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:09:20 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:09:20 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:09:20 IQ138000 ntpd[1644]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:09:20 IQ138000 ntpd[1644]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:09:20 IQ138000 ntpd[1644]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:09:20 IQ138000 ntpd[1644]: Listen normally on 3 lo [::1]:123
Oct 11 01:09:20 IQ138000 ntpd[1644]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:09:20 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:09:20 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:09:20 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:09:20 IQ138000 wb-knxd-config.sh[1511]: No /dev/ttyKNX found, disabling level2
Oct 11 01:09:20 IQ138000 wb-knxd-config.sh[1511]: Restart knxd
Oct 11 01:09:20 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:09:20 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:09:20 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:09:20 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:09:20 IQ138000 wb-mqtt-w1[1685]: MQTT broker localhost:1883
Oct 11 01:09:20 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:20 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:09:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:09:20 IQ138000 wb-mqtt-w1[1685]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:09:20 IQ138000 wb-mqtt-w1[1685]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:09:20 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:09:20 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:09:20 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:09:20 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:09:20 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:09:20 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:09:20 IQ138000 wb-connection-manager[1504]: Connection LegacyWiFi not found, skipping
Oct 11 01:09:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:09:20 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:09:20 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:09:20 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:09:20 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:20 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:09:20 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:09:20 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:09:20 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:09:20 IQ138000 wb-connection-manager[1504]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:09:20 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:09:21 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:09:21 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:09:21 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:09:21 IQ138000 ntpd[1644]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:09:21 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:09:21 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:09:21 IQ138000 wb-connection-manager[1504]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:09:21 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:09:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:09:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:09:21 IQ138000 vnstatd[1655]: Info: vnStat daemon 2.6 started. (pid:1655 uid:110 gid:117 64-bit)
Oct 11 01:09:21 IQ138000 vnstatd[1655]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:09:21 IQ138000 vnstatd[1655]: Info: Interface "ppp0" disabled.
Oct 11 01:09:21 IQ138000 sshd[1746]: Server listening on 0.0.0.0 port 22.
Oct 11 01:09:21 IQ138000 sshd[1746]: Server listening on :: port 22.
Oct 11 01:09:21 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:09:21 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:21 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:09:21 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:09:21 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:09:21 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:21 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:09:21 IQ138000 NetworkManager[404]: <error> [1760144961.6126] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:09:21 IQ138000 NetworkManager[404]: <info>  [1760144961.6129] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1504 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:09:21 IQ138000 wb-connection-manager[1504]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:09:21 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:09:21 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:09:21 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:09:21 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:09:21 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:09:21 IQ138000 knxd[1851]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:09:21 IQ138000 knxd[1851]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:09:21 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:09:21 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:09:21 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:09:22 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:09:22 IQ138000 reverse-ssh.sh[1881]: Error: No such file or directory
Oct 11 01:09:22 IQ138000 ntpd[1644]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:09:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:09:22 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:22 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:09:22 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.2475] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.2481] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1504 uid=0 result="success"
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.2487] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:22 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.2649] manager: NetworkManager state is now CONNECTING
Oct 11 01:09:22 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.3002] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.3189] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.3203] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.3931] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:22 IQ138000 wb-adjust-systime[1885]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4069] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4220] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4226] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4228] Config: added 'scan_ssid' value '1'
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4229] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4230] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:09:22 IQ138000 NetworkManager[404]: <info>  [1760144962.4231] Config: added 'psk' value '<hidden>'
Oct 11 01:09:22 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:09:22 IQ138000 mosquitto[1906]: 1760144962: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:09:22 IQ138000 wb-adjust-systime[1885]: Drift file is valid (was recently edited)
Oct 11 01:09:22 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:09:22 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:09:22 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:09:22 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:09:22 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:09:22 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:09:22 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:09:22 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:09:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:09:23 IQ138000 ntpd[1644]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:09:23 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:09:23 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: MQTT broker localhost:1883
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:23 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:09:23 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] Create indices if necessary
Oct 11 01:09:23 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] Analyzing data table
Oct 11 01:09:23 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:09:23 IQ138000 wb-mqtt-knx[2017]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:23 IQ138000 wb-mqtt-knx[2017]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:09:23 IQ138000 wb-mqtt-logs[2025]: MQTT broker localhost:1883
Oct 11 01:09:23 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:09:23 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:23 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:09:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.562s CPU time.
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:09:23 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:09:23 IQ138000 wb-mqtt-gpio[1823]: INFO: [gpio driver] Started
Oct 11 01:09:23 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:09:24 IQ138000 ntpd[1644]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:09:24 IQ138000 wb-mqtt-opcua[2056]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:09:24 IQ138000 wb-mqtt-confed[1994]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:09:24 IQ138000 NetworkManager[404]: <info>  [1760144964.6192] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:09:24 IQ138000 NetworkManager[404]: <info>  [1760144964.6195] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:09:24 IQ138000 wb-mqtt-confed[1994]: INFO: [wbgo_mqtt] confed-IQ138000-1994: MQTT connection established
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:09:24 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:24 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:24 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:24 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 01:09:24 IQ138000 wb-mqtt-iec104[2006]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 01:09:25 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:09:25 IQ138000 wb-mqtt-mbgate[2037]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:09:25 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:09:25 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:09:25 IQ138000 wb-mqtt-iec104[2218]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:09:25 IQ138000 wb-mqtt-opcua[2200]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:09:25 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:09:25 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:09:25 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:09:26 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:26 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:09:26 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:09:26 IQ138000 wb-mqtt-knx[2017]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:26 IQ138000 wb-mqtt-knx[2017]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:26 IQ138000 wb-mqtt-knx[2017]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:26 IQ138000 wb-mqtt-opcua[2200]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:09:26 IQ138000 wb-mqtt-knx[2017]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:09:26 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:09:26 IQ138000 wb-mqtt-knx[2017]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:09:26 IQ138000 wb-mqtt-iec104[2218]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:09:26 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:09:28 IQ138000 wpa_supplicant[379]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:09:28 IQ138000 python3[1970]: No data file found at /tmp/network_status_cache.json
Oct 11 01:09:28 IQ138000 python3[1970]: Connecting to MQTT
Oct 11 01:09:28 IQ138000 python3[1970]: Connected to MQTT
Oct 11 01:09:28 IQ138000 python3[1970]: Connection returned result: Connection Accepted.
Oct 11 01:09:30 IQ138000 wb-device-manager[1978]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:09:30 IQ138000 wb-device-manager[1978]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:09:30 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2053 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:09:30 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:30 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New virtual device lo da58e95d-a5c4-4987-89fa-eba4f3c671c5 /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:09:30 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:09:31 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:New active connection lo da58e95d-a5c4-4987-89fa-eba4f3c671c5 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:09:31 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:09:31 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:09:31 IQ138000 kernel: dldo4: disabling
Oct 11 01:09:31 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 01:09:31 IQ138000 kernel: vcc-sd: disabling
Oct 11 01:09:32 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:09:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:09:32 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:09:32 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:09:32 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:09:32 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:09:32 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:09:32 IQ138000 knxd[3077]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:09:32 IQ138000 knxd[3077]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:09:32 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:09:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: MQTT broker localhost:1883
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:09:32 IQ138000 wb-mqtt-adc[3091]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:09:33 IQ138000 wb-mqtt-confed[1994]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:09:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:09:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:09:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:09:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:09:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:09:34 IQ138000 wb-gsm[3322]: main: Called from pid 1 (systemd)
Oct 11 01:09:34 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] DB initialization is done
Oct 11 01:09:34 IQ138000 wb-gsm[3371]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:09:34 IQ138000 wb-usb-otg-start.sh[3374]: : wb-usb-otg-start
Oct 11 01:09:34 IQ138000 wb-usb-otg-start.sh[3374]: main: setup_device()
Oct 11 01:09:34 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:09:34 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:09:34 IQ138000 kernel: using random self ethernet address
Oct 11 01:09:34 IQ138000 kernel: using random host ethernet address
Oct 11 01:09:35 IQ138000 wb-usb-otg-start.sh[3374]: main: enabling profile rndis
Oct 11 01:09:35 IQ138000 wb-gsm[3434]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:09:35 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:09:35 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:09:35 IQ138000 systemd-udevd[3396]: Using default interface naming scheme 'v247'.
Oct 11 01:09:35 IQ138000 NetworkManager[404]: <info>  [1760144975.1708] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:09:35 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:35 IQ138000 NetworkManager[404]: <info>  [1760144975.3354] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:09:35 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:09:35 IQ138000 wb-gsm[3504]: should_enable: Should enable GSM modem
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:09:35 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:09:36 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: DB logger started, go to main loop
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:09:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:09:36 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:09:37 IQ138000 wb-gsm[3579]: main: Called from pid 3505 (wb-gsm-mm)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:09:37 IQ138000 wb-gsm[3591]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:09:37 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:09:37 IQ138000 wb-gsm[3614]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:09:37 IQ138000 npm[1689]: > zigbee2mqtt@2.1.1 start
Oct 11 01:09:37 IQ138000 npm[1689]: > node index.js
Oct 11 01:09:37 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:09:38 IQ138000 python3[1970]: Выполнение: service wb-connection-manager stop
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:09:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:09:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-gsm[3995]: mm_off: Modem is already OFF
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:09:41 IQ138000 npm[3633]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:09:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:09:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:09:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:09:41 IQ138000 wb-gsm[4067]: main: Called from pid 3505 (wb-gsm-mm)
Oct 11 01:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:41 IQ138000 wb-gsm[4078]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:41 IQ138000 wb-gsm[4101]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:09:46 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:09:46 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:46 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:46 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:46 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:09:46 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:09:46 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:46 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:09:46 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:09:46 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:09:46 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:09:47 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:09:47 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:09:47 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:09:47 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:09:47 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:09:47 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:09:47 IQ138000 knxd[4501]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:09:47 IQ138000 knxd[4501]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:09:47 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:09:47 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: MQTT broker localhost:1883
Oct 11 01:09:47 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:47 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:09:47 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:09:47 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:09:47 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:09:47 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:09:47 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:09:47 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.164s CPU time.
Oct 11 01:09:47 IQ138000 python3[1970]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:09:47 IQ138000 python3[1970]:  
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: w1 thread Started
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:09:47 IQ138000 wb-mqtt-w1[4507]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <warn>  [1760144987.5284] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <info>  [1760144987.5286] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <info>  [1760144987.5307] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <warn>  [1760144987.5327] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <info>  [1760144987.5341] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:09:47 IQ138000 wb-mqtt-nm-helper[2053]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <info>  [1760144987.5760] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:09:47 IQ138000 NetworkManager[404]: <info>  [1760144987.5762] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:48 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:49 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:09:51 IQ138000 NetworkManager[404]: <info>  [1760144991.1505] manager: startup complete
Oct 11 01:09:51 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:09:51 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:09:51 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:09:51 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:09:51 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:09:51 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:09:51 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:09:51 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:09:51 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:09:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:09:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:09:51 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:09:51 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:09:51 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:09:51 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:09:51 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:09:51 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:09:51 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:09:51 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:09:51 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:09:51 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:09:51 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:51 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:51 IQ138000 wb-rules[4560]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:09:51 IQ138000 wb-rules[4560]: INFO: driver is created
Oct 11 01:09:51 IQ138000 wb-rules[4560]: INFO: [wbgo_mqtt] rules-IQ138000-4560: MQTT connection established
Oct 11 01:09:51 IQ138000 wb-rules[4560]: INFO: driver loop is started
Oct 11 01:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:51 IQ138000 wb-rules[4560]: INFO: wait for driver to become ready
Oct 11 01:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:52 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:52 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:52 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:09:52 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:09:52 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:52 IQ138000 watchdog[4638]: starting daemon (5.16):
Oct 11 01:09:52 IQ138000 watchdog[4638]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:09:52 IQ138000 watchdog[4638]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:09:52 IQ138000 watchdog[4638]:  ping: no machine to check
Oct 11 01:09:52 IQ138000 watchdog[4638]:  file: no file to check
Oct 11 01:09:52 IQ138000 watchdog[4638]:  pidfile: /var/run/sshd.pid
Oct 11 01:09:52 IQ138000 watchdog[4638]:  interface: no interface to check
Oct 11 01:09:52 IQ138000 watchdog[4638]:  temperature: no sensors to check
Oct 11 01:09:52 IQ138000 watchdog[4638]:  no test binary files
Oct 11 01:09:52 IQ138000 watchdog[4638]:  no repair binary files
Oct 11 01:09:52 IQ138000 watchdog[4638]:  error retry time-out = 30 seconds
Oct 11 01:09:52 IQ138000 watchdog[4638]:  repair attempts = 1
Oct 11 01:09:52 IQ138000 watchdog[4638]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:09:52 IQ138000 watchdog[4638]: watchdog now set to 120 seconds
Oct 11 01:09:52 IQ138000 watchdog[4638]: hardware watchdog identity: WBEC WDT
Oct 11 01:09:52 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:09:52 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:09:52 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:52 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:09:52 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:09:52 IQ138000 systemd[1]: Startup finished in 3.809s (kernel) + 51.295s (userspace) = 55.104s.
Oct 11 01:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:53 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:53 IQ138000 wb-rules[4560]: INFO: driver is ready
Oct 11 01:09:53 IQ138000 wb-rules[4560]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:09:53 IQ138000 wb-rules[4560]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4560: MQTT connection established
Oct 11 01:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:09:53 IQ138000 wb-rules[4560]: INFO: [engine] Starting sync loop
Oct 11 01:09:53 IQ138000 wb-rules[4560]: INFO: [engine] Starting main loop
Oct 11 01:09:53 IQ138000 wb-rules[4560]: INFO: the engine is ready
Oct 11 01:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:09:54 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:54 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:55 IQ138000 wb-rules[4560]: WARNING: [rule warning] DAC: no config file
Oct 11 01:09:55 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:09:55 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 6e:5b:34:72:79:25
Oct 11 01:09:55 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:09:55 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:09:55 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:09:55 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:09:55 IQ138000 NetworkManager[404]: <info>  [1760144995.3620] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:09:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:09:55 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:09:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:09:55 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:09:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:09:55 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:09:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:55 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:09:55 IQ138000 systemd-udevd[4908]: Using default interface naming scheme 'v247'.
Oct 11 01:09:55 IQ138000 systemd-udevd[4908]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:55 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:09:55 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:09:57 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:09:57 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:09:57 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 knxd[5002]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:09:57 IQ138000 knxd[5002]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:09:57 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:57 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:09:57 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:09:58 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:58 IQ138000 wb-gsm[5019]: mm_on: Waiting for modem to start
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:58 IQ138000 wb-rules[4560]: INFO: all rule files are loaded
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:09:58 IQ138000 python3[1970]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:59 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:10:01 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:01 IQ138000 npm[3633]: [2025-10-11 01:10:01] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 npm[3633]: [2025-10-11 01:10:01] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:10:01 IQ138000 npm[3633]: [2025-10-11 01:10:01] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:10:02 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:10:02 IQ138000 npm[3633]: [2025-10-11 01:10:02] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:10:02 IQ138000 npm[3633]: [2025-10-11 01:10:02] info:         zh:zstack:znp: Serialport opened
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 01:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:10:03 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:10:04 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:10:05.509+00:00
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:10:05.509Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760145185521,"cmd_timestamp_ms":1760145005521,"source":"schedule"}
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760145185521,"cmd_timestamp_ms":1760145005521,"source":"schedule"}
Oct 11 01:10:05 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:10:05.880+00:00
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:10:05.880Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760145185898,"cmd_timestamp_ms":1760145005898,"source":"schedule"}
Oct 11 01:10:05 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760145185898,"cmd_timestamp_ms":1760145005898,"source":"schedule"}
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: Currently 4 devices are joined.
Oct 11 01:10:05 IQ138000 npm[3633]: [2025-10-11 01:10:05] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:10:06.029+00:00
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:10:06.029Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186062,"cmd_timestamp_ms":1760145006062,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186062,"cmd_timestamp_ms":1760145006062,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:10:06.168+00:00
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:10:06.168Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186183,"cmd_timestamp_ms":1760145006183,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186183,"cmd_timestamp_ms":1760145006183,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:10:06.281+00:00
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:10:06.281Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186297,"cmd_timestamp_ms":1760145006297,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186297,"cmd_timestamp_ms":1760145006297,"source":"schedule"}
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m: Connected to MQTT server
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:10:06.415+00:00
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:10:06.415Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186429,"cmd_timestamp_ms":1760145006429,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186429,"cmd_timestamp_ms":1760145006429,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:10:06.566+00:00
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:10:06.566Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186583,"cmd_timestamp_ms":1760145006583,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186583,"cmd_timestamp_ms":1760145006583,"source":"schedule"}
Oct 11 01:10:06 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:10:06.715+00:00
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:10:06.715Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186742,"cmd_timestamp_ms":1760145006742,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760145186742,"cmd_timestamp_ms":1760145006742,"source":"schedule"}
Oct 11 01:10:06 IQ138000 wb-rules[4560]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:10:06 IQ138000 wb-rules[4560]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:10:06 IQ138000 wb-rules[4560]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:10:06 IQ138000 wb-rules[4560]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m: Started frontend on port 8282
Oct 11 01:10:06 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:10:06 IQ138000 npm[3633]: [2025-10-11 01:10:06] info:         z2m: Zigbee2MQTT started!
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:10:07.251+00:00
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:10:07.251Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760145187270,"cmd_timestamp_ms":1760145007270,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760145187270,"cmd_timestamp_ms":1760145007270,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:10:07 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:10:07 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:10:07 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:10:07.448+00:00
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:10:07.448Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760145187461,"cmd_timestamp_ms":1760145007461,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760145187461,"cmd_timestamp_ms":1760145007461,"source":"schedule"}
Oct 11 01:10:07 IQ138000 knxd[5187]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:10:07 IQ138000 knxd[5187]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:10:07 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:10:07 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:10:07 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:10:07.651+00:00
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:10:07.651Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760145187681,"cmd_timestamp_ms":1760145007681,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760145187681,"cmd_timestamp_ms":1760145007681,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:10:07 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:10:07.834+00:00
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:10:07.834Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760145187850,"cmd_timestamp_ms":1760145007850,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760145187850,"cmd_timestamp_ms":1760145007850,"source":"schedule"}
Oct 11 01:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:10:07 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:10:07.998+00:00
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:10:07.998Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760145188011,"cmd_timestamp_ms":1760145008011,"source":"schedule"}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760145188011,"cmd_timestamp_ms":1760145008011,"source":"schedule"}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:10:08.187+00:00
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:10:08.187Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760145188198,"cmd_timestamp_ms":1760145008198,"source":"schedule"}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760145188198,"cmd_timestamp_ms":1760145008198,"source":"schedule"}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:10:08.413+00:00
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:10:08.413Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760145188421,"cmd_timestamp_ms":1760145008421,"source":"schedule"}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760145188421,"cmd_timestamp_ms":1760145008421,"source":"schedule"}
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:10:08 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:10:08 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:10:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:10:09 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:10:09 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:10:09 IQ138000 wb-watchdog[5260]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:09 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:10:09 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:10:09 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:10:09 IQ138000 wb-rules[4560]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:10:09 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:10:09 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:10:09 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:10:09 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:10:10 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:10:12 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:10:13 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:10:14 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:10:15 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
-- Boot 555004600af24ebeb7184b19136e3334 --
Oct 11 01:22:44 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:22:44 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:22:44 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:22:44 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:22:44 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:22:44 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:22:44 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:22:44 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:22:44 IQ138000 kernel: Zone ranges:
Oct 11 01:22:44 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:22:44 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:22:44 IQ138000 kernel: Movable zone start for each node
Oct 11 01:22:44 IQ138000 kernel: Early memory node ranges
Oct 11 01:22:44 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:22:44 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:22:44 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:22:44 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:22:44 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:22:44 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:22:44 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:22:44 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:22:44 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:22:44 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:22:44 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:22:44 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:22:44 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:22:44 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:22:44 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:22:44 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:22:44 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:22:44 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:22:44 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:22:44 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:22:44 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:22:44 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:22:44 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:22:44 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:22:44 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:22:44 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:22:44 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:22:44 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:22:44 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:22:44 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:22:44 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:22:44 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:22:44 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:22:44 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:22:44 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:22:44 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:22:44 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:22:44 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:22:44 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:22:44 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:22:44 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:22:44 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:22:44 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:22:44 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:22:44 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:22:44 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:22:44 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:22:44 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:22:44 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:22:44 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:22:44 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:22:44 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:22:44 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:22:44 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:22:44 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:22:44 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:22:44 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:22:44 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:22:44 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:22:44 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:22:44 IQ138000 kernel: No ATAGs?
Oct 11 01:22:44 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:22:44 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:22:44 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:22:44 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:22:44 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:22:44 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:22:44 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:22:44 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:22:44 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:22:44 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:22:44 IQ138000 kernel: PTP clock support registered
Oct 11 01:22:44 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:22:44 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:22:44 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:22:44 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:22:44 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:22:44 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:22:44 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:22:44 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:22:44 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:22:44 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:22:44 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:22:44 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:22:44 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:22:44 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:22:44 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:22:44 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:22:44 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:22:44 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:22:44 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:22:44 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:22:44 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:22:44 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:22:44 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:22:44 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:22:44 IQ138000 kernel: brd: module loaded
Oct 11 01:22:44 IQ138000 kernel: loop: module loaded
Oct 11 01:22:44 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:22:44 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:22:44 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:22:44 IQ138000 kernel: CAN device driver interface
Oct 11 01:22:44 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:22:44 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:22:44 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:22:44 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:22:44 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:22:44 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:22:44 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:22:44 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:22:44 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:22:44 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:22:44 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:22:44 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:22:44 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:22:44 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:22:44 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:22:44 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:22:44 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:22:44 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:22:44 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:22:44 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:22:44 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:22:44 IQ138000 kernel: can: controller area network core
Oct 11 01:22:44 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:22:44 IQ138000 kernel: can: raw protocol
Oct 11 01:22:44 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:22:44 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:22:44 IQ138000 kernel: can: SAE J1939
Oct 11 01:22:44 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:22:44 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:22:44 IQ138000 kernel: registered taskstats version 1
Oct 11 01:22:44 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:22:44 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:22:44 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:22:44 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:22:44 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:22:44 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:22:44 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:22:44 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:22:44 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:22:40 UTC (1760145760)
Oct 11 01:22:44 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:22:44 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:22:44 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:22:44 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:22:44 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:22:44 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:22:44 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:22:44 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:22:44 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:22:44 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:22:44 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:22:44 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:22:44 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:22:44 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:22:44 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: random: fast init done
Oct 11 01:22:44 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:22:44 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:22:44 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:22:44 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:22:44 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:22:44 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:22:44 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:22:44 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:22:44 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:22:44 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:22:44 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:22:44 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:22:44 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:22:44 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:22:44 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:22:44 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:22:44 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:22:44 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:22:44 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:22:44 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:22:44 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:22:44 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:22:44 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:22:44 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:22:44 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:22:44 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:22:44 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:22:44 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:22:44 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:22:44 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:22:44 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:22:44 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:22:44 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:22:44 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:22:44 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:22:44 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:22:44 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:22:44 IQ138000 kernel: of_cfs_init
Oct 11 01:22:44 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:22:44 IQ138000 kernel: ALSA device list:
Oct 11 01:22:44 IQ138000 kernel:   No soundcards found.
Oct 11 01:22:44 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:22:44 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:22:44 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:22:44 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:22:44 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:22:44 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:22:44 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:22:44 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:22:44 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:22:44 IQ138000 kernel:   with arguments:
Oct 11 01:22:44 IQ138000 kernel:     /sbin/init
Oct 11 01:22:44 IQ138000 kernel:   with environment:
Oct 11 01:22:44 IQ138000 kernel:     HOME=/
Oct 11 01:22:44 IQ138000 kernel:     TERM=linux
Oct 11 01:22:44 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:22:44 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:22:44 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:22:44 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:22:44 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:22:44 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:22:44 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:22:44 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:22:44 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:22:44 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:22:44 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:22:44 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:22:44 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:22:44 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:22:44 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:22:44 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:22:44 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:22:44 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:22:44 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:22:44 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:22:44 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:22:44 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:22:44 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:22:44 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:22:44 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:22:44 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:22:44 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:22:44 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:22:44 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:22:44 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:22:44 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:22:44 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:22:44 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:22:44 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:22:44 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:22:44 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:22:44 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:22:44 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:22:44 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:22:44 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:22:44 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:22:44 IQ138000 systemd-journald[139]: Journal started
Oct 11 01:22:44 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:22:44 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 01:22:44 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:22:44 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:22:44 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:22:44 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:22:44 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:22:44 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:22:44 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:22:44 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:22:44 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:22:45 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:22:45 IQ138000 systemd-random-seed[150]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:22:45 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:22:45 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:22:45 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:22:45 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:22:45 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:22:45 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:22:45 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:22:45 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:22:45 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:22:45 IQ138000 systemd-udevd[155]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:22:45 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:22:45 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:22:46 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 01:22:46 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:22:46 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:22:46 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:22:46 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:22:46 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:22:46 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:22:46 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:22:46 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:22:46 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:22:46 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:22:46 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:22:46 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 01:22:46 IQ138000 systemd-udevd[159]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:22:46 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:22:46 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:22:46 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:22:46 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:22:46 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:22:46 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:22:46 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:22:46 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:22:46 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:22:47 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:22:47 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:22:47 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:22:47 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:22:47 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:22:47 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:22:47 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:22:47 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:22:47 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:22:47 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:22:47 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 01:22:47 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 01:22:47 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:22:47 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:22:47 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:22:47 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:22:47 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:22:47 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:22:47 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:22:47 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:22:47 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:22:47 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:22:47 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:22:47 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:22:47 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:22:47 IQ138000 systemd-fsck[212]: data: recovering journal
Oct 11 01:22:47 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:22:47 IQ138000 systemd-fsck[212]: data: Clearing orphaned inode 128377 (uid=0, gid=101, mode=0100640, size=8388608)
Oct 11 01:22:47 IQ138000 systemd-fsck[212]: data: clean, 16440/328656 files, 372578/1313536 blocks
Oct 11 01:22:47 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:22:47 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:22:47 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:22:47 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:22:47 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:22:47 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:22:47 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:22:47 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:22:48 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:22:48 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.230ms for 462 entries.
Oct 11 01:22:48 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 502.4M, max 496.6M, 0B free.
Oct 11 01:22:48 IQ138000 kernel: random: crng init done
Oct 11 01:22:48 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:22:48 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:22:48 IQ138000 wb-configs-early[219]: Checking symlinks to /mnt/data
Oct 11 01:22:48 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:22:48 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:22:48 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:22:48 IQ138000 wb-configs-early[219]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:22:48 IQ138000 wb-configs-early[219]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:22:48 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:22:48 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:22:48 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:22:49 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:22:49 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:22:49 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:22:49 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:22:49 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:22:49 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:22:49 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:22:49 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:22:49 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:22:49 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:22:49 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:22:49 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:22:49 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:22:49 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:22:49 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:22:49 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:22:49 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:22:49 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:22:49 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:22:49 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 01:22:49 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:22:49 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 01:22:49 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:22:49 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:22:49 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:22:49 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:22:49 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:22:49 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:22:49 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:22:49 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 01:22:49 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:22:49 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:22:49 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 01:22:49 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:22:49 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:22:49 IQ138000 wb-watchdog[322]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:22:49 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:22:50 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:22:50 IQ138000 migrate.sh[328]: Error: No such file or directory
Oct 11 01:22:50 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:22:50 IQ138000 reverse-ssh.sh[344]: Error: No such file or directory
Oct 11 01:22:50 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:22:50 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:22:50 IQ138000 migrate.sh[341]: Error: No such file or directory
Oct 11 01:22:50 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:22:50 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:22:50 IQ138000 migrate.sh[355]: Error: No such file or directory
Oct 11 01:22:50 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:22:50 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:22:50 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:22:50 IQ138000 rules-preprocessor[335]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:22:50 IQ138000 rules-preprocessor[335]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:22:50 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:22:50 IQ138000 migrate.sh[366]: Error: No such file or directory
Oct 11 01:22:50 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Successfully dropped root privileges.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: avahi-daemon 0.8 starting up.
Oct 11 01:22:50 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Successfully called chroot().
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Successfully dropped remaining capabilities.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: No service file found in /etc/avahi/services.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Network interface enumeration completed.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Registering new address record for ::1 on lo.*.
Oct 11 01:22:50 IQ138000 avahi-daemon[363]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:22:50 IQ138000 migrate.sh[379]: Error: No such file or directory
Oct 11 01:22:50 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:22:50 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 01:22:50 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:22:50 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:22:50 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 01:22:50 IQ138000 systemd-logind[348]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:22:50 IQ138000 systemd-logind[348]: New seat seat0.
Oct 11 01:22:50 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:22:50 IQ138000 wpa_supplicant[378]: Successfully initialized wpa_supplicant
Oct 11 01:22:50 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:22:50 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:22:50 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:22:50 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:22:50 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:22:50 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:22:50 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:22:50 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:22:50 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:22:50 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:22:50 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:22:50 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:22:50 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:22:50 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:22:50 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:22:50 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:22:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:22:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:22:50 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:22:51 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:22:51 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.1058] NetworkManager (version 1.42.4) is starting... (boot:55500460-0af2-4ebe-b718-4b19136e3334)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.1063] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:22:51 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.1283] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:22:51 IQ138000 monit[319]: Starting daemon monitor: monit.
Oct 11 01:22:51 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.1782] manager[0x686900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:22:51 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:22:51 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:22:51 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:22:51 IQ138000 avahi-daemon[363]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3818617779.
Oct 11 01:22:51 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:22:51 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:22:51 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:22:51 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:22:51 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:22:51 IQ138000 ModemManager[475]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:22:51 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:22:51 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.7810] hostname: hostname: using hostnamed
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.7815] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.7867] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.7997] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8031] manager[0x686900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8067] manager[0x686900]: rfkill: WWAN hardware radio set enabled
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8434] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8522] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8568] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8912] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8951] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.8996] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9006] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9016] manager: Networking is enabled by state file
Oct 11 01:22:51 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9233] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9237] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9238] ifupdown: management mode: unmanaged
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9240] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:22:51 IQ138000 NetworkManager[403]: <info>  [1760145771.9241] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:22:51 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:22:51 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0130] dhcp: init: Using DHCP client 'internal'
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0176] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:22:52 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:22:52 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0351] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0475] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0645] device (lo): Activation: starting connection 'lo' (5287f86a-89e2-4805-a73b-b59be289b500)
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0752] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.0871] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.4472] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.4543] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.4573] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.4653] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:22:52 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:22:52 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:22:52 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:22:52 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:22:52 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:22:52 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.6757] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.6875] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.6935] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:22:52 IQ138000 NetworkManager[403]: <info>  [1760145772.6961] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5057] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5104] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5129] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5588] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5644] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5668] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.5736] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.6279] modem-manager: ModemManager available
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.6290] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.6303] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.6338] device (lo): Activation: successful, device activated.
Oct 11 01:22:53 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9713] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9720] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9745] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9766] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9961] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9967] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:22:53 IQ138000 NetworkManager[403]: <info>  [1760145773.9989] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:22:54 IQ138000 NetworkManager[403]: <info>  [1760145774.0008] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:22:54 IQ138000 NetworkManager[403]: <info>  [1760145774.0077] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:22:54 IQ138000 NetworkManager[403]: <info>  [1760145774.0137] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:22:54 IQ138000 NetworkManager[403]: <info>  [1760145774.0187] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:22:54 IQ138000 NetworkManager[403]: <info>  [1760145774.0242] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:22:54 IQ138000 ModemManager[475]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:22:54 IQ138000 ModemManager[475]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:22:54 IQ138000 ModemManager[475]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:22:57 IQ138000 init.sh[1318]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:22:57 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:22:57 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 01:22:57 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:57 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:22:57 IQ138000 init.sh[1318]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:22:57 IQ138000 init.sh[1318]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:22:58 IQ138000 init.sh[1393]: In file included from -:11:
Oct 11 01:22:58 IQ138000 init.sh[1393]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:58 IQ138000 init.sh[1318]: ...
Oct 11 01:22:58 IQ138000 init.sh[1408]: In file included from -:11:
Oct 11 01:22:58 IQ138000 init.sh[1408]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:58 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 01:22:58 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 01:22:58 IQ138000 init.sh[1318]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:22:58 IQ138000 init.sh[1428]: In file included from -:24:
Oct 11 01:22:58 IQ138000 init.sh[1428]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:58 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:22:58 IQ138000 init.sh[1318]: ...
Oct 11 01:22:58 IQ138000 init.sh[1443]: In file included from -:24:
Oct 11 01:22:58 IQ138000 init.sh[1443]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:59 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 01:22:59 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 01:22:59 IQ138000 init.sh[1318]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:22:59 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 01:22:59 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:59 IQ138000 init.sh[1318]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:22:59 IQ138000 init.sh[1489]: In file included from -:11:
Oct 11 01:22:59 IQ138000 init.sh[1489]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:22:59 IQ138000 init.sh[1318]: ...
Oct 11 01:22:59 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:22:59 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:22:59 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:22:59 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:23:00 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:23:00 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:23:00 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:23:00 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:23:00 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:23:00 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:00 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:23:00 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:23:00 IQ138000 lsyncd[1614]: 01:23:00 Normal: --- Startup ---
Oct 11 01:23:00 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:00 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:00 IQ138000 lsyncd[1614]: 01:23:00 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:23:00 IQ138000 lsyncd[1614]: iq_network_manager/iq_network_manager.log
Oct 11 01:23:00 IQ138000 lsyncd[1614]: journal
Oct 11 01:23:00 IQ138000 lsyncd[1614]: messages
Oct 11 01:23:00 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:23:00 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:23:00 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:23:00 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:23:00 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:23:00 IQ138000 ntpd[1622]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:23:00 IQ138000 ntpd[1622]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:23:00 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 01:23:00 IQ138000 lsyncd[1630]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:23:00 IQ138000 ntpd[1622]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:23:00 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:23:00 IQ138000 lsyncd[1621]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:23:00 IQ138000 lsyncd[1621]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 01:23:00 IQ138000 ntpd[1622]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:23:00 IQ138000 lsyncd[1614]: 01:23:00 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:23:00 IQ138000 ntpd[1622]: corporation.  Support and training for ntp-4 are
Oct 11 01:23:00 IQ138000 ntpd[1622]: available at https://www.nwtime.org/support
Oct 11 01:23:00 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 01:23:00 IQ138000 ntpd[1648]: proto: precision = 1.000 usec (-20)
Oct 11 01:23:00 IQ138000 ntpd[1648]: basedate set to 2020-09-11
Oct 11 01:23:00 IQ138000 ntpd[1648]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:23:00 IQ138000 ntpd[1648]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:23:00 IQ138000 ntpd[1648]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:23:00 IQ138000 ntpd[1648]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:23:00 IQ138000 ntpd[1648]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:23:00 IQ138000 ntpd[1648]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:23:00 IQ138000 ntpd[1648]: Listen normally on 3 lo [::1]:123
Oct 11 01:23:00 IQ138000 ntpd[1648]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:23:00 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:23:00 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:23:01 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:23:01 IQ138000 persist_meter_data.sh[1650]: Error: No such file or directory
Oct 11 01:23:01 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:23:01 IQ138000 wb-knxd-config.sh[1517]: No /dev/ttyKNX found, disabling level2
Oct 11 01:23:01 IQ138000 wb-knxd-config.sh[1517]: Restart knxd
Oct 11 01:23:01 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:23:01 IQ138000 wb-connection-manager[1506]: Connection LegacyWiFi not found, skipping
Oct 11 01:23:01 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:23:01 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:23:01 IQ138000 wb-mqtt-w1[1679]: MQTT broker localhost:1883
Oct 11 01:23:01 IQ138000 wb-mqtt-w1[1679]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:01 IQ138000 wb-mqtt-w1[1679]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:23:01 IQ138000 wb-mqtt-w1[1679]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:23:01 IQ138000 wb-mqtt-w1[1679]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:23:01 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:01 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:23:01 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:23:01 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:23:01 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:23:01 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:23:01 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:23:01 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:01 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:01 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:23:01 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:23:01 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:23:01 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:23:01 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:01 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:23:01 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:23:01 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:23:01 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:23:01 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:23:01 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:23:01 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:23:01 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:23:01 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:23:01 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:23:01 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:23:01 IQ138000 ntpd[1648]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:23:01 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:23:01 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:23:01 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:23:01 IQ138000 sshd[1734]: Server listening on 0.0.0.0 port 22.
Oct 11 01:23:01 IQ138000 sshd[1734]: Server listening on :: port 22.
Oct 11 01:23:02 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:23:02 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <error> [1760145782.1590] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.1593] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1506 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:23:02 IQ138000 wb-connection-manager[1506]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:23:02 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:23:02 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:23:02 IQ138000 vnstatd[1654]: Info: vnStat daemon 2.6 started. (pid:1654 uid:110 gid:117 64-bit)
Oct 11 01:23:02 IQ138000 vnstatd[1654]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:23:02 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:23:02 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 01:23:02 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:02 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:23:02 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:23:02 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:23:02 IQ138000 knxd[1826]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:02 IQ138000 knxd[1826]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:02 IQ138000 wpa_supplicant[378]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:23:02 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.6119] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.6360] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1506 uid=0 result="success"
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.6369] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.6403] manager: NetworkManager state is now CONNECTING
Oct 11 01:23:02 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.6889] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:02 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7130] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7132] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7498] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7542] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7573] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7580] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7582] Config: added 'scan_ssid' value '1'
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7584] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7586] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:23:02 IQ138000 NetworkManager[403]: <info>  [1760145782.7587] Config: added 'psk' value '<hidden>'
Oct 11 01:23:02 IQ138000 reverse-ssh.sh[1865]: Error: No such file or directory
Oct 11 01:23:02 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:02 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:23:02 IQ138000 ntpd[1648]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:23:02 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:23:03 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:03 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:03 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:03 IQ138000 NetworkManager[403]: <info>  [1760145783.0365] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:23:03 IQ138000 NetworkManager[403]: <info>  [1760145783.0367] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:23:03 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:23:03 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:23:03 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:23:03 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:03 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:23:03 IQ138000 wb-adjust-systime[1870]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:23:03 IQ138000 wb-adjust-systime[1870]: Drift file is valid (was recently edited)
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:23:03 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:23:03 IQ138000 mosquitto[1920]: 1760145783: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:23:03 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:23:03 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:23:03 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:23:03 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:23:03 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:23:03 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:23:03 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:23:03 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: MQTT broker localhost:1883
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:23:03 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:03 IQ138000 ntpd[1648]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:23:03 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Create indices if necessary
Oct 11 01:23:03 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Analyzing data table
Oct 11 01:23:03 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:23:03 IQ138000 wb-mqtt-knx[2013]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:04 IQ138000 wb-mqtt-knx[2013]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:04 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:23:04 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:23:04 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:23:04 IQ138000 wb-mqtt-logs[2019]: MQTT broker localhost:1883
Oct 11 01:23:04 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:04 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:04 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:23:04 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:23:04 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.539s CPU time.
Oct 11 01:23:04 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:23:04 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:04 IQ138000 ntpd[1648]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:23:04 IQ138000 wb-mqtt-opcua[2045]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 01:23:05 IQ138000 wb-mqtt-confed[1988]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2003]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 01:23:05 IQ138000 wb-mqtt-confed[1988]: INFO: [wbgo_mqtt] confed-IQ138000-1988: MQTT connection established
Oct 11 01:23:05 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:23:05 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:23:05 IQ138000 wb-mqtt-iec104[2153]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:23:05 IQ138000 wb-mqtt-opcua[2140]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:23:05 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:05 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:05 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:05 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:06 IQ138000 wb-mqtt-opcua[2140]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:23:06 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [gpio driver] Started
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:23:06 IQ138000 wb-mqtt-gpio[1899]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:23:06 IQ138000 wb-mqtt-mbgate[2025]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:23:06 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:23:06 IQ138000 wb-mqtt-iec104[2153]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:23:06 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:23:06 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:06 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:23:06 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:23:06 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:23:06 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:23:07 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:23:07 IQ138000 wb-mqtt-knx[2013]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:07 IQ138000 wb-mqtt-knx[2013]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:07 IQ138000 wb-mqtt-knx[2013]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:07 IQ138000 wb-mqtt-knx[2013]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:23:07 IQ138000 wb-mqtt-knx[2013]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:23:08 IQ138000 python3[1969]: No data file found at /tmp/network_status_cache.json
Oct 11 01:23:08 IQ138000 python3[1969]: Connecting to MQTT
Oct 11 01:23:08 IQ138000 python3[1969]: Connected to MQTT
Oct 11 01:23:08 IQ138000 python3[1969]: Connection returned result: Connection Accepted.
Oct 11 01:23:09 IQ138000 NetworkManager[403]: <info>  [1760145789.1842] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:23:09 IQ138000 NetworkManager[403]: <info>  [1760145789.1844] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:23:10 IQ138000 wb-device-manager[1979]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:23:10 IQ138000 wb-device-manager[1979]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:23:11 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2039 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:23:11 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:11 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device lo 5287f86a-89e2-4805-a73b-b59be289b500 /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:23:11 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New active connection lo 5287f86a-89e2-4805-a73b-b59be289b500 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:23:12 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:23:12 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:23:12 IQ138000 kernel: dldo4: disabling
Oct 11 01:23:12 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 01:23:12 IQ138000 kernel: vcc-sd: disabling
Oct 11 01:23:13 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:13 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:23:13 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:13 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:23:13 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:23:13 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:23:13 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:23:13 IQ138000 knxd[3085]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:13 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:13 IQ138000 knxd[3085]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:13 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:13 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:13 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: MQTT broker localhost:1883
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:23:13 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:23:14 IQ138000 wb-mqtt-confed[1988]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-serial[1667]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:23:14 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] DB initialization is done
Oct 11 01:23:15 IQ138000 wb-gsm[3316]: main: Called from pid 1 (systemd)
Oct 11 01:23:15 IQ138000 wb-gsm[3354]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:23:15 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:23:16 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:23:16 IQ138000 wb-gsm[3450]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:23:16 IQ138000 wb-usb-otg-start.sh[3453]: : wb-usb-otg-start
Oct 11 01:23:16 IQ138000 wb-usb-otg-start.sh[3453]: main: setup_device()
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:23:16 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:23:16 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:23:16 IQ138000 kernel: using random self ethernet address
Oct 11 01:23:16 IQ138000 kernel: using random host ethernet address
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:23:16 IQ138000 wb-usb-otg-start.sh[3453]: main: enabling profile rndis
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:23:16 IQ138000 systemd-udevd[3444]: Using default interface naming scheme 'v247'.
Oct 11 01:23:16 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:23:16 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:23:16 IQ138000 NetworkManager[403]: <info>  [1760145796.5343] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:23:16 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:23:16 IQ138000 NetworkManager[403]: <info>  [1760145796.7691] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:23:16 IQ138000 wb-gsm[3504]: should_enable: Should enable GSM modem
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:23:16 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:23:16 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:23:17 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:23:17 IQ138000 NetworkManager[403]: <info>  [1760145797.9095] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:23:17 IQ138000 NetworkManager[403]: <info>  [1760145797.9098] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:23:17 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:23:18 IQ138000 wb-gsm[3577]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 01:23:18 IQ138000 wb-gsm[3588]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:23:18 IQ138000 wb-gsm[3612]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:23:18 IQ138000 python3[1969]: Выполнение: service wb-connection-manager stop
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:23:18 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:23:19 IQ138000 ModemManager[475]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:23:19 IQ138000 npm[1686]: > zigbee2mqtt@2.1.1 start
Oct 11 01:23:19 IQ138000 npm[1686]: > node index.js
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: DB logger started, go to main loop
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:23:19 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:23:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:23:20 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:20 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:21 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:22 IQ138000 npm[3698]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:23:22 IQ138000 wb-gsm[4000]: mm_off: Modem is already OFF
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:23:22 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:23 IQ138000 wb-gsm[4070]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:23:23 IQ138000 wb-gsm[4082]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 4 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:23 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:23:23 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:24 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:24 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:24 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:23:24 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:23:24 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:23:24 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:23:25 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:26 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:26 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:23:26 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:26 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:26 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:26 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:26 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:26 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:26 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:23:27 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:23:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:23:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:27 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:23:27 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:23:27 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:23:27 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:27 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:23:27 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:23:27 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:23:27 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:23:27 IQ138000 knxd[4435]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:27 IQ138000 knxd[4435]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: MQTT broker localhost:1883
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:23:27 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:23:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:23:27 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:27 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:27 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: w1 thread Started
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:23:27 IQ138000 wb-mqtt-w1[4456]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:23:27 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:27 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:23:27 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.144s CPU time.
Oct 11 01:23:27 IQ138000 python3[1969]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:23:27 IQ138000 python3[1969]:  
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <warn>  [1760145807.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <info>  [1760145807.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:23:27 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <info>  [1760145807.5337] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <warn>  [1760145807.5358] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <info>  [1760145807.5372] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:27 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <info>  [1760145807.5871] manager: startup complete
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <info>  [1760145807.5912] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:23:27 IQ138000 NetworkManager[403]: <info>  [1760145807.5915] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:23:27 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:23:27 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:23:27 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:27 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:28 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:29 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:23:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:30 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:23:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:30 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:23:31 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:23:31 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:23:31 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:31 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:31 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:23:31 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:31 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:23:32 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:32 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:23:32 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:23:32 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:23:32 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:32 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:23:32 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:23:32 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:23:32 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:23:32 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:23:32 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:23:32 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:23:32 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:23:32 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:23:32 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:23:32 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:23:32 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:32 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:23:32 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:23:32 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:23:32 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:23:32 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:23:32 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:23:32 IQ138000 watchdog[4628]: starting daemon (5.16):
Oct 11 01:23:32 IQ138000 watchdog[4628]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:23:32 IQ138000 watchdog[4628]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:23:32 IQ138000 watchdog[4628]:  ping: no machine to check
Oct 11 01:23:32 IQ138000 watchdog[4628]:  file: no file to check
Oct 11 01:23:32 IQ138000 watchdog[4628]:  pidfile: /var/run/sshd.pid
Oct 11 01:23:32 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:32 IQ138000 watchdog[4628]:  interface: no interface to check
Oct 11 01:23:32 IQ138000 watchdog[4628]:  temperature: no sensors to check
Oct 11 01:23:32 IQ138000 watchdog[4628]:  no test binary files
Oct 11 01:23:32 IQ138000 watchdog[4628]:  no repair binary files
Oct 11 01:23:32 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:23:32 IQ138000 watchdog[4628]:  error retry time-out = 30 seconds
Oct 11 01:23:32 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:23:32 IQ138000 watchdog[4628]:  repair attempts = 1
Oct 11 01:23:32 IQ138000 watchdog[4628]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:23:32 IQ138000 watchdog[4628]: watchdog now set to 120 seconds
Oct 11 01:23:32 IQ138000 watchdog[4628]: hardware watchdog identity: WBEC WDT
Oct 11 01:23:32 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:23:32 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:23:32 IQ138000 python3[1969]: Выполнение: mmcli -m wbc
Oct 11 01:23:32 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:23:32 IQ138000 systemd[1]: Startup finished in 3.782s (kernel) + 50.101s (userspace) = 53.883s.
Oct 11 01:23:32 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:32 IQ138000 wb-rules[4608]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:23:32 IQ138000 wb-rules[4608]: INFO: driver is created
Oct 11 01:23:32 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] rules-IQ138000-4608: MQTT connection established
Oct 11 01:23:32 IQ138000 wb-rules[4608]: INFO: driver loop is started
Oct 11 01:23:32 IQ138000 wb-rules[4608]: INFO: wait for driver to become ready
Oct 11 01:23:32 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:32 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:32 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:33 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:33 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:34 IQ138000 wb-rules[4608]: INFO: driver is ready
Oct 11 01:23:34 IQ138000 wb-rules[4608]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:23:34 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4608: MQTT connection established
Oct 11 01:23:34 IQ138000 wb-rules[4608]: INFO: [engine] Starting main loop
Oct 11 01:23:34 IQ138000 wb-rules[4608]: INFO: the engine is ready
Oct 11 01:23:34 IQ138000 wb-rules[4608]: INFO: [engine] Starting sync loop
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:34 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:34 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:35 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:35 IQ138000 wb-rules[4608]: WARNING: [rule warning] DAC: no config file
Oct 11 01:23:35 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:36 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:36 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:23:37 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:23:37 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:23:37 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:23:37 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:23:37 IQ138000 NetworkManager[403]: <info>  [1760145817.3074] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:23:37 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, fe:e9:77:6b:de:c5
Oct 11 01:23:37 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:23:37 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:23:37 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:23:37 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:37 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:23:37 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:23:37 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:23:37 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:23:37 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:23:37 IQ138000 systemd-udevd[4974]: Using default interface naming scheme 'v247'.
Oct 11 01:23:37 IQ138000 systemd-udevd[4974]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:23:37 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:37 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:23:37 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:37 IQ138000 knxd[5000]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:37 IQ138000 knxd[5000]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:37 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:37 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:37 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:37 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:37 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:23:38 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 python3[1969]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:38 IQ138000 wb-rules[4608]: INFO: all rule files are loaded
Oct 11 01:23:39 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:23:39 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:23:40 IQ138000 wb-gsm[5035]: mm_on: Waiting for modem to start
Oct 11 01:23:40 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:23:40 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:41 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:41 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 npm[3698]: [2025-10-11 01:23:42] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:23:42 IQ138000 npm[3698]: [2025-10-11 01:23:42] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:23:42 IQ138000 npm[3698]: [2025-10-11 01:23:42] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:42 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:43 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:43 IQ138000 npm[3698]: [2025-10-11 01:23:43] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:23:43 IQ138000 npm[3698]: [2025-10-11 01:23:43] info:         zh:zstack:znp: Serialport opened
Oct 11 01:23:43 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 01:23:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:44 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:44 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:45 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:45 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:23:45 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:23:45 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:23:45 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:23:45 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:23:45 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:23:46.106+00:00
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:23:46.106Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146006121,"cmd_timestamp_ms":1760145826121,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146006121,"cmd_timestamp_ms":1760145826121,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:23:46.393+00:00
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:23:46.393Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146006406,"cmd_timestamp_ms":1760145826406,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146006406,"cmd_timestamp_ms":1760145826406,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:23:46.512+00:00
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:23:46.512Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006523,"cmd_timestamp_ms":1760145826523,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006523,"cmd_timestamp_ms":1760145826523,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:23:46.677+00:00
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:23:46.677Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006698,"cmd_timestamp_ms":1760145826698,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006698,"cmd_timestamp_ms":1760145826698,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:46 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:23:46.804+00:00
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:23:46.804Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006818,"cmd_timestamp_ms":1760145826818,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006818,"cmd_timestamp_ms":1760145826818,"source":"schedule"}
Oct 11 01:23:46 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:23:46.917+00:00
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:23:46.917Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006935,"cmd_timestamp_ms":1760145826935,"source":"schedule"}
Oct 11 01:23:46 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146006935,"cmd_timestamp_ms":1760145826935,"source":"schedule"}
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:23:47.103+00:00
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:23:47.103Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146007116,"cmd_timestamp_ms":1760145827116,"source":"schedule"}
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146007116,"cmd_timestamp_ms":1760145827116,"source":"schedule"}
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: Currently 4 devices are joined.
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:23:47.245+00:00
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:23:47.245Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146007269,"cmd_timestamp_ms":1760145827269,"source":"schedule"}
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146007269,"cmd_timestamp_ms":1760145827269,"source":"schedule"}
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m: Connected to MQTT server
Oct 11 01:23:47 IQ138000 npm[3698]: [2025-10-11 01:23:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:23:47 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:23:47 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:23:47 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:23:47 IQ138000 knxd[5186]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:47 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:47 IQ138000 knxd[5186]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:23:47.879+00:00
Oct 11 01:23:47 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:23:47 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:23:47.879Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146007905,"cmd_timestamp_ms":1760145827905,"source":"schedule"}
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146007905,"cmd_timestamp_ms":1760145827905,"source":"schedule"}
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:47 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:47 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:23:47 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:23:48.016+00:00
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:23:48.016Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146008041,"cmd_timestamp_ms":1760145828041,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146008041,"cmd_timestamp_ms":1760145828041,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:23:48 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:23:48 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:23:48 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:23:48 IQ138000 npm[3698]: [2025-10-11 01:23:48] info:         z2m: Started frontend on port 8282
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:23:48.190+00:00
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:23:48 IQ138000 npm[3698]: [2025-10-11 01:23:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:23:48.190Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:23:48 IQ138000 npm[3698]: [2025-10-11 01:23:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146008211,"cmd_timestamp_ms":1760145828211,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146008211,"cmd_timestamp_ms":1760145828211,"source":"schedule"}
Oct 11 01:23:48 IQ138000 npm[3698]: [2025-10-11 01:23:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:23:48 IQ138000 npm[3698]: [2025-10-11 01:23:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:23:48 IQ138000 npm[3698]: [2025-10-11 01:23:48] info:         z2m: Zigbee2MQTT started!
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:23:48.486+00:00
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:23:48.486Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146008514,"cmd_timestamp_ms":1760145828514,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146008514,"cmd_timestamp_ms":1760145828514,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:23:48.544+00:00
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:23:48.544Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146008561,"cmd_timestamp_ms":1760145828561,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146008561,"cmd_timestamp_ms":1760145828561,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:23:48.682+00:00
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:23:48.682Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146008694,"cmd_timestamp_ms":1760145828694,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146008694,"cmd_timestamp_ms":1760145828694,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:23:48.912+00:00
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:23:48.912Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146008924,"cmd_timestamp_ms":1760145828924,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146008924,"cmd_timestamp_ms":1760145828924,"source":"schedule"}
Oct 11 01:23:48 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:23:49 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-watchdog[5249]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:23:49 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:23:49 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:23:50 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:50 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:23:50 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:23:50 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:23:50 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:23:51 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:52 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:53 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:53 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:23:53 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:23:53 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:23:54 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:54 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:55 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:55 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:55 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:56 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:56 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:23:57 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:23:57 IQ138000 wb-mqtt-serial[1667]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:23:57 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:57 IQ138000 ModemManager[475]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:23:57 IQ138000 ModemManager[475]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 01:23:58 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 01:23:58 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:23:58 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:23:58 IQ138000 knxd[5384]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:23:58 IQ138000 knxd[5384]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:23:58 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:23:58 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:23:58 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:23:58 IQ138000 ModemManager[475]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:23:58 IQ138000 ModemManager[475]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:23:58 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:58 IQ138000 ModemManager[475]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:23:59 IQ138000 ModemManager[475]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:23:59 IQ138000 ModemManager[475]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:23:59 IQ138000 ModemManager[475]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:23:59 IQ138000 ModemManager[475]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:23:59 IQ138000 python3[1969]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:23:59 IQ138000 ModemManager[475]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 01:23:59 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7325] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7345] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7364] device (ttyUSB1): modem state 'enabling'
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7400] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7454] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7562] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7569] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:23:59 IQ138000 NetworkManager[403]: <info>  [1760145839.7588] manager: NetworkManager state is now CONNECTING
Oct 11 01:23:59 IQ138000 ModemManager[475]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 01:23:59 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:23:59 IQ138000 ModemManager[475]: <info>  [modem0] power state updated: on
Oct 11 01:24:00 IQ138000 python3[1969]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:24:00 IQ138000 python3[1969]:    --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:24:00 IQ138000 python3[1969]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:24:00 IQ138000 python3[1969]:            |                model: A7602E-H
Oct 11 01:24:00 IQ138000 python3[1969]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:24:00 IQ138000 python3[1969]:            |            supported: gsm-umts
Oct 11 01:24:00 IQ138000 python3[1969]:            |              current: gsm-umts
Oct 11 01:24:00 IQ138000 python3[1969]:            |         equipment id: 860803062234204
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   System   |               device: wbc
Oct 11 01:24:00 IQ138000 python3[1969]:            |              drivers: option, rndis_host
Oct 11 01:24:00 IQ138000 python3[1969]:            |               plugin: simtech
Oct 11 01:24:00 IQ138000 python3[1969]:            |         primary port: ttyUSB1
Oct 11 01:24:00 IQ138000 python3[1969]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:24:00 IQ138000 python3[1969]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:24:00 IQ138000 python3[1969]:            |                state: enabling
Oct 11 01:24:00 IQ138000 python3[1969]:            |          power state: on
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:24:00 IQ138000 python3[1969]:            |              current: allowed: any; preferred: none
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   3GPP     |                 imei: 860803062234204
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:24:00 IQ138000 python3[1969]:   --------------------------------
Oct 11 01:24:00 IQ138000 python3[1969]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:24:00 IQ138000 python3[1969]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:24:00 IQ138000 python3[1969]:            |                       slot 2: none
Oct 11 01:24:00 IQ138000 python3[1969]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:24:00 IQ138000 python3[1969]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:24:00 IQ138000 python3[1969]:  successfully requested primary SIM switch in modem
Oct 11 01:24:01 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:24:01 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:24:01 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:24:01 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:24:01 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:24:01 IQ138000 lsyncd[5435]: 01:24:01 Normal: --- Startup ---
Oct 11 01:24:01 IQ138000 lsyncd[5435]: 01:24:01 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:24:01 IQ138000 lsyncd[5435]: iq_network_manager/iq_network_manager.log
Oct 11 01:24:01 IQ138000 lsyncd[5435]: messages
Oct 11 01:24:01 IQ138000 lsyncd[5435]: journal
Oct 11 01:24:01 IQ138000 lsyncd[5437]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:24:01 IQ138000 lsyncd[5436]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:24:01 IQ138000 lsyncd[5436]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:24:01 IQ138000 lsyncd[5435]: 01:24:01 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:24:01 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:24:01 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:24:02 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:24:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:24:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] simple connect started...
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] simple connect state (6/10): register
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 01:24:04 IQ138000 NetworkManager[403]: <info>  [1760145844.5563] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:24:04 IQ138000 NetworkManager[403]: <info>  [1760145844.5582] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:24:04 IQ138000 NetworkManager[403]: <info>  [1760145844.5623] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 01:24:04 IQ138000 NetworkManager[403]: <info>  [1760145844.5645] ppp-manager: starting PPP connection
Oct 11 01:24:04 IQ138000 NetworkManager[403]: <info>  [1760145844.5781] ppp-manager: pppd started with pid 5462
Oct 11 01:24:04 IQ138000 pppd[5462]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:24:04 IQ138000 NetworkManager[5462]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: initializing
Oct 11 01:24:04 IQ138000 pppd[5462]: pppd 2.4.9 started by root, uid 0
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:24:04 IQ138000 pppd[5462]: Using interface ppp0
Oct 11 01:24:04 IQ138000 NetworkManager[5462]: Using interface ppp0
Oct 11 01:24:04 IQ138000 NetworkManager[5462]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:24:04 IQ138000 pppd[5462]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:24:04 IQ138000 NetworkManager[403]: <info>  [1760145844.6535] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:24:04 IQ138000 pppd[5462]: PAP authentication succeeded
Oct 11 01:24:04 IQ138000 NetworkManager[5462]: PAP authentication succeeded
Oct 11 01:24:04 IQ138000 NetworkManager[5462]: kernel does not support PPP filtering
Oct 11 01:24:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:24:04 IQ138000 pppd[5462]: kernel does not support PPP filtering
Oct 11 01:24:04 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 01:24:04 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:24:04 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 01:24:04 IQ138000 ModemManager[475]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 01:24:04 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:24:04 IQ138000 wb-mqtt-serial[1667]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:24:04 IQ138000 wb-mqtt-serial[1667]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:24:05 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:24:05 IQ138000 pppd[5462]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:24:05 IQ138000 NetworkManager[5462]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:24:05 IQ138000 pppd[5462]: local  IP address 10.234.75.97
Oct 11 01:24:05 IQ138000 NetworkManager[5462]: local  IP address 10.234.75.97
Oct 11 01:24:05 IQ138000 NetworkManager[5462]: remote IP address 10.64.64.64
Oct 11 01:24:05 IQ138000 NetworkManager[5462]: primary   DNS address 172.23.10.131
Oct 11 01:24:05 IQ138000 NetworkManager[5462]: secondary DNS address 172.23.10.130
Oct 11 01:24:05 IQ138000 pppd[5462]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:24:05 IQ138000 pppd[5462]: remote IP address 10.64.64.64
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.2157] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:24:05 IQ138000 pppd[5462]: primary   DNS address 172.23.10.131
Oct 11 01:24:05 IQ138000 pppd[5462]: secondary DNS address 172.23.10.130
Oct 11 01:24:05 IQ138000 pppd[5462]: nm-ppp-plugin: ip-up event
Oct 11 01:24:05 IQ138000 pppd[5462]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.2302] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.2322] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.2355] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.2476] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:24:05 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:24:05 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.3104] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:24:05 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:24:05 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:24:05 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:24:05 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.4109] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.4121] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.4142] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.4163] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:24:05 IQ138000 NetworkManager[403]: <info>  [1760145845.4195] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:24:05 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:24:05 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 01:24:05 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:24:06 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:24:06 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:24:06 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:24:06 IQ138000 ntpd[1648]: Listen normally on 4 ppp0 10.234.75.97:123
Oct 11 01:24:06 IQ138000 ntpd[1648]: new interface(s) found: waking up resolver
Oct 11 01:24:07 IQ138000 wb-mqtt-serial[1667]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:24:08 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 01:24:08 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:24:08 IQ138000 systemd[1]: Starting KNX Daemon...
-- Boot 4b3d67d415d649e6a9ab1c6d4d507eef --
Oct 11 01:26:15 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:26:15 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:26:15 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:26:15 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:26:15 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:26:15 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:26:15 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:26:15 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:26:15 IQ138000 kernel: Zone ranges:
Oct 11 01:26:15 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:26:15 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:26:15 IQ138000 kernel: Movable zone start for each node
Oct 11 01:26:15 IQ138000 kernel: Early memory node ranges
Oct 11 01:26:15 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:26:15 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:26:15 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:26:15 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:26:15 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:26:15 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:26:15 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:26:15 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:26:15 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:26:15 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:26:15 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:26:15 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:26:15 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:26:15 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:26:15 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:26:15 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:26:15 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:26:15 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:26:15 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:26:15 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:26:15 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:26:15 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:26:15 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:26:15 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:26:15 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:26:15 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:26:15 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:26:15 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:26:15 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:26:15 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:26:15 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:26:15 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:26:15 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:26:15 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:26:15 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:26:15 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:26:15 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:26:15 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:26:15 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:26:15 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:26:15 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:26:15 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:26:15 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:26:15 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:26:15 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:26:15 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:26:15 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:26:15 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:26:15 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:26:15 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:26:15 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:26:15 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:26:15 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:26:15 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:26:15 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:26:15 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:26:15 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:26:15 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:26:15 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:26:15 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:26:15 IQ138000 kernel: No ATAGs?
Oct 11 01:26:15 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:26:15 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:26:15 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:26:15 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:26:15 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:26:15 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:26:15 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:26:15 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:26:15 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:26:15 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:26:15 IQ138000 kernel: PTP clock support registered
Oct 11 01:26:15 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:26:15 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:26:15 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:26:15 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:26:15 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:26:15 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:26:15 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:26:15 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:26:15 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:26:15 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:26:15 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:26:15 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:26:15 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:26:15 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:26:15 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:26:15 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:26:15 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:26:15 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:26:15 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:26:15 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:26:15 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:26:15 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:26:15 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:26:15 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:26:15 IQ138000 kernel: brd: module loaded
Oct 11 01:26:15 IQ138000 kernel: loop: module loaded
Oct 11 01:26:15 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:26:15 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:26:15 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:26:15 IQ138000 kernel: CAN device driver interface
Oct 11 01:26:15 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:26:15 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:26:15 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:26:15 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:26:15 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:26:15 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:26:15 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:26:15 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:26:15 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:26:15 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:26:15 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:26:15 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:26:15 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:26:15 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:26:15 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:26:15 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:26:15 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:26:15 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:26:15 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:26:15 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:26:15 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:26:15 IQ138000 kernel: can: controller area network core
Oct 11 01:26:15 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:26:15 IQ138000 kernel: can: raw protocol
Oct 11 01:26:15 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:26:15 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:26:15 IQ138000 kernel: can: SAE J1939
Oct 11 01:26:15 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:26:15 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:26:15 IQ138000 kernel: registered taskstats version 1
Oct 11 01:26:15 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:26:15 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:26:15 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:26:15 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:26:15 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:26:15 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:26:15 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:26:15 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:26:15 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:26:11 UTC (1760145971)
Oct 11 01:26:15 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:26:15 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:26:15 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:26:15 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:26:15 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:26:15 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:26:15 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:26:15 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:26:15 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:26:15 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:26:15 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:26:15 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:26:15 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:26:15 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:26:15 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: random: fast init done
Oct 11 01:26:15 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:26:15 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:26:15 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:26:15 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:26:15 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:26:15 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:26:15 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:26:15 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:26:15 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:26:15 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:26:15 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:26:15 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:26:15 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:26:15 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:26:15 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:26:15 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:26:15 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:26:15 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:26:15 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:26:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:26:15 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:26:15 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:26:15 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:26:15 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:26:15 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:26:15 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:26:15 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:26:15 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:26:15 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:26:15 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:26:15 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:26:15 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:26:15 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:26:15 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:26:15 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:26:15 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:26:15 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:26:15 IQ138000 kernel: of_cfs_init
Oct 11 01:26:15 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:26:15 IQ138000 kernel: ALSA device list:
Oct 11 01:26:15 IQ138000 kernel:   No soundcards found.
Oct 11 01:26:15 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:26:15 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:26:15 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:26:15 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:26:15 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:26:15 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:26:15 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:26:15 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:26:15 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:26:15 IQ138000 kernel:   with arguments:
Oct 11 01:26:15 IQ138000 kernel:     /sbin/init
Oct 11 01:26:15 IQ138000 kernel:   with environment:
Oct 11 01:26:15 IQ138000 kernel:     HOME=/
Oct 11 01:26:15 IQ138000 kernel:     TERM=linux
Oct 11 01:26:15 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:26:15 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:26:15 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:26:15 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:26:15 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:26:15 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:26:15 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:26:15 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:26:15 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:26:15 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:26:15 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:26:15 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:26:15 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:26:15 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:26:15 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:26:15 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:26:15 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:26:15 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:26:15 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:26:15 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:26:15 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:26:15 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:26:15 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:26:15 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:26:15 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:26:15 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:26:15 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:26:15 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:26:15 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:26:15 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:26:15 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:26:15 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:26:15 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:26:15 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:26:15 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:26:15 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:26:15 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:26:15 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:26:15 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:26:15 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:26:15 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:26:15 IQ138000 systemd-journald[139]: Journal started
Oct 11 01:26:15 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:26:15 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 01:26:15 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:26:15 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:26:15 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:26:15 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:26:15 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:26:15 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:26:15 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:26:16 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:26:16 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:26:16 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:26:16 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:26:16 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:26:16 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:26:16 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:26:16 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:26:16 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:26:16 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:26:16 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:26:16 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:26:16 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:26:16 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:26:16 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:26:16 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:26:16 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:26:17 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 01:26:17 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:26:17 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:26:17 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:26:17 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:26:17 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:26:17 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:26:17 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:26:17 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:26:17 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 01:26:17 IQ138000 systemd-udevd[159]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:26:17 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:26:17 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:26:17 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:26:17 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:26:17 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:26:17 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:26:17 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:26:17 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:26:18 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:26:18 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:26:18 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:26:18 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:26:18 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:26:18 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:26:18 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:26:18 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:26:18 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:26:18 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:26:18 IQ138000 systemd-fsck[205]: data: recovering journal
Oct 11 01:26:18 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:26:18 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:26:18 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:26:18 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:26:18 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:26:18 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:26:18 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:26:18 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:26:18 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:26:18 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:26:18 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:26:18 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:26:18 IQ138000 systemd-fsck[205]: data: clean, 16440/328656 files, 372579/1313536 blocks
Oct 11 01:26:18 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:26:18 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:26:18 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:26:18 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:26:18 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:26:18 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 01:26:18 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 01:26:18 IQ138000 systemd-udevd[166]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:26:18 IQ138000 systemd-udevd[162]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:26:18 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:26:18 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:26:18 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:26:18 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:26:18 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:26:18 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:26:18 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:26:18 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:26:18 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:26:18 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.573ms for 462 entries.
Oct 11 01:26:18 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 454.4M, max 496.6M, 42.1M free.
Oct 11 01:26:19 IQ138000 kernel: random: crng init done
Oct 11 01:26:19 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:26:18 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:26:19 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 01:26:19 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:26:19 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:26:19 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:26:19 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:26:19 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:26:19 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:26:19 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:26:19 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:26:20 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:26:20 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:26:20 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:26:20 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:26:20 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:26:20 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:26:20 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:26:20 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:26:20 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:26:20 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:26:20 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:26:20 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:26:20 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:26:20 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:26:20 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:26:20 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:26:20 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:26:20 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:26:20 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:26:20 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:26:20 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:26:20 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:26:20 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:26:20 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 01:26:20 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:26:20 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:26:20 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 01:26:20 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:26:20 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:26:20 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:26:20 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:26:20 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:26:20 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 01:26:20 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:26:20 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:26:20 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 01:26:20 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:26:20 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:26:20 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:26:20 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:26:20 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:26:20 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:26:20 IQ138000 migrate.sh[323]: Error: No such file or directory
Oct 11 01:26:21 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:26:21 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:26:21 IQ138000 migrate.sh[332]: Error: No such file or directory
Oct 11 01:26:21 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:26:21 IQ138000 migrate.sh[344]: Error: No such file or directory
Oct 11 01:26:21 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:26:21 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Oct 11 01:26:21 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:26:21 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:26:21 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:26:21 IQ138000 migrate.sh[356]: Error: No such file or directory
Oct 11 01:26:21 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:26:21 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:26:21 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:26:21 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:26:21 IQ138000 rules-preprocessor[340]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:26:21 IQ138000 rules-preprocessor[340]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:26:21 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:26:21 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:26:21 IQ138000 migrate.sh[370]: Error: No such file or directory
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Successfully dropped root privileges.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: avahi-daemon 0.8 starting up.
Oct 11 01:26:21 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Successfully called chroot().
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Successfully dropped remaining capabilities.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: No service file found in /etc/avahi/services.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Network interface enumeration completed.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Registering new address record for ::1 on lo.*.
Oct 11 01:26:21 IQ138000 avahi-daemon[366]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:26:21 IQ138000 systemd-logind[346]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:26:21 IQ138000 systemd-logind[346]: New seat seat0.
Oct 11 01:26:21 IQ138000 wb-watch-configs[388]: Watched dirs: /etc /etc/network
Oct 11 01:26:21 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:26:21 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:26:21 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 01:26:21 IQ138000 wpa_supplicant[380]: Successfully initialized wpa_supplicant
Oct 11 01:26:21 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:26:21 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:26:21 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:21 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:26:21 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:26:21 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:26:21 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:21 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:26:21 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:26:21 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:26:21 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:26:21 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:26:21 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:21 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:26:21 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:26:21 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:26:21 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:26:21 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:26:21 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:26:21 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:26:22 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:26:22 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:26:22 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:26:22 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.1456] NetworkManager (version 1.42.4) is starting... (boot:4b3d67d4-15d6-49e6-a9ab-1c6d4d507eef)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.1459] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:26:22 IQ138000 monit[324]: Starting daemon monitor: monit.
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.1621] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:26:22 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:26:22 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.2097] manager[0x746900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:26:22 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:26:22 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:26:22 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:26:22 IQ138000 avahi-daemon[366]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3546424040.
Oct 11 01:26:22 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:26:22 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:26:22 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:26:22 IQ138000 ModemManager[471]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:26:22 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:26:22 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8230] hostname: hostname: using hostnamed
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8233] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8271] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8359] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8381] manager[0x746900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8383] manager[0x746900]: rfkill: WWAN hardware radio set enabled
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8647] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8773] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.8819] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:26:22 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9137] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9175] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9231] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9248] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9275] manager: Networking is enabled by state file
Oct 11 01:26:22 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9343] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9352] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9354] ifupdown: management mode: unmanaged
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9356] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9358] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:26:22 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9948] dhcp: init: Using DHCP client 'internal'
Oct 11 01:26:22 IQ138000 NetworkManager[405]: <info>  [1760145982.9973] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.0171] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.0217] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.0291] device (lo): Activation: starting connection 'lo' (0a0f66c5-6aad-48c6-8ab5-829fe90b3580)
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.0400] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.0441] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:23 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:26:23 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.4132] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.4176] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.4279] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.4387] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:26:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:26:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:26:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:26:23 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:26:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.6472] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.6533] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.6597] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:26:23 IQ138000 NetworkManager[405]: <info>  [1760145983.6623] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.4773] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.4867] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.4906] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.5384] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.5417] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.5442] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.5511] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.5962] modem-manager: ModemManager available
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.5991] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.6020] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.6052] device (lo): Activation: successful, device activated.
Oct 11 01:26:24 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9051] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9059] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9079] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9094] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9124] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9171] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9427] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9433] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9455] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9480] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9621] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:26:24 IQ138000 NetworkManager[405]: <info>  [1760145984.9671] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:25 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:26:25 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:26:25 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:26:28 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:26:28 IQ138000 init.sh[1321]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:26:28 IQ138000 init.sh[1336]: In file included from -:16:
Oct 11 01:26:28 IQ138000 init.sh[1336]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:28 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:26:28 IQ138000 init.sh[1321]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:26:29 IQ138000 init.sh[1321]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:26:29 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 01:26:29 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:29 IQ138000 init.sh[1321]: ...
Oct 11 01:26:29 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 01:26:29 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:29 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 01:26:29 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 01:26:29 IQ138000 init.sh[1321]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:26:29 IQ138000 init.sh[1430]: In file included from -:24:
Oct 11 01:26:29 IQ138000 init.sh[1430]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:29 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:26:30 IQ138000 init.sh[1321]: ...
Oct 11 01:26:30 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 01:26:30 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:30 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 01:26:30 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 01:26:30 IQ138000 init.sh[1321]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:26:30 IQ138000 init.sh[1468]: In file included from -:11:
Oct 11 01:26:30 IQ138000 init.sh[1468]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:30 IQ138000 init.sh[1321]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:26:30 IQ138000 init.sh[1491]: In file included from -:11:
Oct 11 01:26:30 IQ138000 init.sh[1491]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:26:30 IQ138000 init.sh[1321]: ...
Oct 11 01:26:30 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:26:31 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:26:31 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:26:31 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:26:31 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:26:31 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:26:31 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:26:31 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:26:31 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:26:31 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:26:31 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:26:31 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:26:31 IQ138000 lsyncd[1611]: 01:26:31 Normal: --- Startup ---
Oct 11 01:26:31 IQ138000 knxd[1606]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:26:31 IQ138000 knxd[1606]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:26:31 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:26:31 IQ138000 lsyncd[1611]: 01:26:31 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:26:31 IQ138000 lsyncd[1611]: iq_network_manager/iq_network_manager.log
Oct 11 01:26:31 IQ138000 lsyncd[1611]: messages
Oct 11 01:26:31 IQ138000 lsyncd[1611]: journal
Oct 11 01:26:31 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:26:31 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:26:31 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:26:31 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:26:31 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:26:31 IQ138000 lsyncd[1627]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:26:31 IQ138000 lsyncd[1621]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:26:31 IQ138000 lsyncd[1621]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 01:26:31 IQ138000 lsyncd[1611]: 01:26:31 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:26:32 IQ138000 ntpd[1620]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:26:32 IQ138000 ntpd[1620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:26:32 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:26:32 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 01:26:32 IQ138000 ntpd[1620]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:26:32 IQ138000 ntpd[1620]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:26:32 IQ138000 ntpd[1620]: corporation.  Support and training for ntp-4 are
Oct 11 01:26:32 IQ138000 ntpd[1620]: available at https://www.nwtime.org/support
Oct 11 01:26:32 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 01:26:32 IQ138000 ntpd[1647]: proto: precision = 1.000 usec (-20)
Oct 11 01:26:32 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:26:32 IQ138000 persist_meter_data.sh[1644]: Error: No such file or directory
Oct 11 01:26:32 IQ138000 ntpd[1647]: basedate set to 2020-09-11
Oct 11 01:26:32 IQ138000 ntpd[1647]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:26:32 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:26:32 IQ138000 ntpd[1647]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:26:32 IQ138000 ntpd[1647]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:26:32 IQ138000 ntpd[1647]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:26:32 IQ138000 ntpd[1647]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:26:32 IQ138000 ntpd[1647]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:26:32 IQ138000 ntpd[1647]: Listen normally on 3 lo [::1]:123
Oct 11 01:26:32 IQ138000 ntpd[1647]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:26:32 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:26:32 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:26:32 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:26:32 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:26:32 IQ138000 wb-mqtt-w1[1669]: MQTT broker localhost:1883
Oct 11 01:26:32 IQ138000 wb-mqtt-w1[1669]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:32 IQ138000 wb-mqtt-w1[1669]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:26:32 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:26:32 IQ138000 wb-mqtt-w1[1669]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:26:32 IQ138000 wb-mqtt-w1[1669]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:26:32 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:26:32 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:26:32 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:26:32 IQ138000 wb-knxd-config.sh[1521]: No /dev/ttyKNX found, disabling level2
Oct 11 01:26:32 IQ138000 wb-knxd-config.sh[1521]: Restart knxd
Oct 11 01:26:32 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:26:32 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:26:32 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:26:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:26:32 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:26:32 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:26:32 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:26:32 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:32 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:26:32 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:26:32 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:26:32 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:26:32 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:26:32 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:26:32 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:26:32 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:26:32 IQ138000 wb-connection-manager[1509]: Connection LegacyWiFi not found, skipping
Oct 11 01:26:33 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:26:33 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:26:33 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:26:33 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:26:33 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:26:33 IQ138000 ntpd[1647]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:26:33 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:33 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:26:33 IQ138000 sshd[1725]: Server listening on 0.0.0.0 port 22.
Oct 11 01:26:33 IQ138000 sshd[1725]: Server listening on :: port 22.
Oct 11 01:26:33 IQ138000 vnstatd[1646]: Info: vnStat daemon 2.6 started. (pid:1646 uid:110 gid:117 64-bit)
Oct 11 01:26:33 IQ138000 vnstatd[1646]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:26:33 IQ138000 vnstatd[1646]: Info: Interface "ppp0" disabled.
Oct 11 01:26:33 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:26:33 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:26:33 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:26:33 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:26:33 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:26:33 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:26:33 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:26:33 IQ138000 wpa_supplicant[380]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:26:33 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:26:33 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:26:33 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:26:33 IQ138000 reverse-ssh.sh[1834]: Error: No such file or directory
Oct 11 01:26:33 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:26:33 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:33 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:26:33 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:26:33 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:26:33 IQ138000 NetworkManager[405]: <error> [1760145993.9167] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:26:33 IQ138000 NetworkManager[405]: <info>  [1760145993.9170] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1509 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:26:33 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:33 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:26:33 IQ138000 wb-connection-manager[1509]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:26:34 IQ138000 ntpd[1647]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:26:34 IQ138000 mosquitto[1880]: 1760145994: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:26:34 IQ138000 wb-adjust-systime[1839]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:26:34 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:26:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:26:34 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:26:34 IQ138000 wb-adjust-systime[1839]: Drift file is valid (was recently edited)
Oct 11 01:26:34 IQ138000 knxd[1908]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:26:34 IQ138000 knxd[1908]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:26:34 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:26:34 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:26:34 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5295] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5302] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1509 uid=0 result="success"
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5308] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5329] manager: NetworkManager state is now CONNECTING
Oct 11 01:26:34 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5716] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5741] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.5743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:34 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.6994] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7016] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7035] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7224] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7226] Config: added 'scan_ssid' value '1'
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7228] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7229] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.7230] Config: added 'psk' value '<hidden>'
Oct 11 01:26:34 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:26:34 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:26:34 IQ138000 wb-mqtt-db[1962]: MQTT broker localhost:1883
Oct 11 01:26:34 IQ138000 wb-mqtt-db[1962]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:26:34 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.9490] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:26:34 IQ138000 NetworkManager[405]: <info>  [1760145994.9495] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:26:34 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:26:35 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:26:35 IQ138000 ntpd[1647]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:26:35 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:26:35 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:35 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:35 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:26:35 IQ138000 wb-mqtt-db[1962]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:26:35 IQ138000 wb-mqtt-db[1962]: INFO: [sqlite] Create indices if necessary
Oct 11 01:26:35 IQ138000 wb-mqtt-db[1962]: INFO: [sqlite] Analyzing data table
Oct 11 01:26:35 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:26:35 IQ138000 wb-mqtt-logs[1992]: MQTT broker localhost:1883
Oct 11 01:26:35 IQ138000 wb-mqtt-logs[1992]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:35 IQ138000 wb-mqtt-logs[1992]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:35 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:26:35 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:26:36 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.538s CPU time.
Oct 11 01:26:36 IQ138000 ntpd[1647]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:26:36 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:26:36 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:26:36 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:36 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:26:36 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:26:36 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:26:36 IQ138000 wb-mqtt-confed[1956]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:26:36 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:26:36 IQ138000 wb-mqtt-opcua[2015]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:26:36 IQ138000 wb-mqtt-confed[1956]: INFO: [wbgo_mqtt] confed-IQ138000-1956: MQTT connection established
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:26:36 IQ138000 wb-mqtt-iec104[1973]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:26:36 IQ138000 wb-mqtt-logs[1992]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:36 IQ138000 wb-mqtt-logs[1992]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:36 IQ138000 wb-mqtt-logs[1992]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:36 IQ138000 wb-mqtt-logs[1992]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:26:36 IQ138000 wb-mqtt-knx[2141]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:36 IQ138000 wb-mqtt-knx[2141]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:36 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:26:36 IQ138000 wb-mqtt-mbgate[1994]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:26:36 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:26:36 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:26:37 IQ138000 wb-mqtt-gpio[1853]: INFO: [gpio driver] Started
Oct 11 01:26:37 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:26:37 IQ138000 wb-mqtt-gpio[1853]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:26:37 IQ138000 wb-mqtt-opcua[2189]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:26:37 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:26:37 IQ138000 wb-mqtt-iec104[2214]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:26:37 IQ138000 wb-mqtt-opcua[2189]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:26:37 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:26:37 IQ138000 wb-mqtt-iec104[2214]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:26:37 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:26:37 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:37 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:26:37 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:26:38 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:26:38 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:26:38 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:26:39 IQ138000 wb-mqtt-knx[2141]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:39 IQ138000 wb-mqtt-knx[2141]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:39 IQ138000 wb-mqtt-knx[2141]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:39 IQ138000 wb-mqtt-knx[2141]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:26:39 IQ138000 wb-mqtt-knx[2141]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:26:39 IQ138000 NetworkManager[405]: <info>  [1760145999.9376] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:26:39 IQ138000 NetworkManager[405]: <info>  [1760145999.9378] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:26:40 IQ138000 python3[1935]: No data file found at /tmp/network_status_cache.json
Oct 11 01:26:40 IQ138000 python3[1935]: Connecting to MQTT
Oct 11 01:26:40 IQ138000 python3[1935]: Connected to MQTT
Oct 11 01:26:40 IQ138000 python3[1935]: Connection returned result: Connection Accepted.
Oct 11 01:26:41 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2011 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New virtual device lo 0a0f66c5-6aad-48c6-8ab5-829fe90b3580 /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:26:41 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New active connection lo 0a0f66c5-6aad-48c6-8ab5-829fe90b3580 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:26:41 IQ138000 wb-device-manager[1945]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:26:41 IQ138000 wb-device-manager[1945]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:26:42 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:42 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:43 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:26:43 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:26:43 IQ138000 kernel: dldo4: disabling
Oct 11 01:26:43 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 01:26:43 IQ138000 kernel: vcc-sd: disabling
Oct 11 01:26:43 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: MQTT broker localhost:1883
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:26:43 IQ138000 wb-mqtt-adc[3054]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:26:44 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:26:44 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:26:44 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:26:44 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:26:44 IQ138000 wb-mqtt-confed[1956]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-mqtt-serial[1656]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:26:45 IQ138000 wb-gsm[3321]: main: Called from pid 1 (systemd)
Oct 11 01:26:45 IQ138000 wb-gsm[3370]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:26:46 IQ138000 wb-usb-otg-start.sh[3412]: : wb-usb-otg-start
Oct 11 01:26:46 IQ138000 wb-usb-otg-start.sh[3412]: main: setup_device()
Oct 11 01:26:46 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:26:46 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:46 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:26:46 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:26:46 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:26:46 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:26:46 IQ138000 kernel: using random self ethernet address
Oct 11 01:26:46 IQ138000 kernel: using random host ethernet address
Oct 11 01:26:46 IQ138000 wb-usb-otg-start.sh[3412]: main: enabling profile rndis
Oct 11 01:26:46 IQ138000 wb-gsm[3453]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:26:46 IQ138000 knxd[3449]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:26:46 IQ138000 knxd[3449]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:26:46 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:26:46 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:46 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:26:46 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:26:46 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:26:46 IQ138000 systemd-udevd[3418]: Using default interface naming scheme 'v247'.
Oct 11 01:26:46 IQ138000 NetworkManager[405]: <info>  [1760146006.5076] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:26:46 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:26:46 IQ138000 wb-mqtt-db[1962]: INFO: [sqlite] DB initialization is done
Oct 11 01:26:46 IQ138000 NetworkManager[405]: <info>  [1760146006.6814] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:26:46 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:26:47 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 01:26:47 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:26:47 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: DB logger started, go to main loop
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:26:48 IQ138000 wb-gsm[3580]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:26:48 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:26:48 IQ138000 wb-gsm[3593]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:26:48 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:26:48 IQ138000 wb-mqtt-db[1962]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:26:48 IQ138000 NetworkManager[405]: <info>  [1760146008.8045] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:26:48 IQ138000 NetworkManager[405]: <info>  [1760146008.8047] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:26:48 IQ138000 wb-gsm[3616]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:26:49 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:26:49 IQ138000 npm[1680]: > zigbee2mqtt@2.1.1 start
Oct 11 01:26:49 IQ138000 npm[1680]: > node index.js
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:26:49 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:50 IQ138000 python3[1935]: Выполнение: service wb-connection-manager stop
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:26:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:26:52 IQ138000 npm[3675]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:26:52 IQ138000 wb-gsm[4001]: mm_off: Modem is already OFF
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:26:52 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:26:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:26:53 IQ138000 wb-gsm[4071]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 01:26:53 IQ138000 wb-gsm[4082]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:26:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:53 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:26:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:26:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:26:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:26:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:26:58 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:26:58 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:58 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:58 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:58 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:58 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:26:58 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:26:58 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:26:58 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:26:58 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:26:58 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:26:58 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:26:58 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:26:58 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: MQTT broker localhost:1883
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:26:58 IQ138000 knxd[4507]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:26:58 IQ138000 knxd[4507]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:26:58 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: w1 thread Started
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:26:58 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:26:58 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:26:58 IQ138000 wb-mqtt-w1[4512]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:26:58 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.167s CPU time.
Oct 11 01:26:58 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:26:58 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:58 IQ138000 python3[1935]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:26:58 IQ138000 python3[1935]:  
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:26:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <warn>  [1760146019.5289] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:26:59 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <info>  [1760146019.5290] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <info>  [1760146019.5308] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <warn>  [1760146019.5324] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <info>  [1760146019.5336] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:26:59 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <info>  [1760146019.5775] manager: startup complete
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <info>  [1760146019.5788] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:26:59 IQ138000 NetworkManager[405]: <info>  [1760146019.5790] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:26:59 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:26:59 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:26:59 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:26:59 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:26:59 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:26:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:27:00 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:27:00 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:27:00 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:27:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:27:01 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:27:02 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:27:02 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:27:03 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:27:03 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:27:03 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:27:03 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:27:03 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:27:03 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:27:03 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:27:03 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:27:03 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:27:03 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:27:03 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:27:03 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:27:03 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:27:03 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:27:03 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:27:03 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:03 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:27:03 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:27:03 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:27:03 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:03 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:27:03 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:27:03 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:27:03 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:03 IQ138000 watchdog[4628]: starting daemon (5.16):
Oct 11 01:27:03 IQ138000 watchdog[4628]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:27:03 IQ138000 watchdog[4628]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:27:03 IQ138000 watchdog[4628]:  ping: no machine to check
Oct 11 01:27:03 IQ138000 watchdog[4628]:  file: no file to check
Oct 11 01:27:03 IQ138000 watchdog[4628]:  pidfile: /var/run/sshd.pid
Oct 11 01:27:03 IQ138000 watchdog[4628]:  interface: no interface to check
Oct 11 01:27:03 IQ138000 watchdog[4628]:  temperature: no sensors to check
Oct 11 01:27:03 IQ138000 watchdog[4628]:  no test binary files
Oct 11 01:27:03 IQ138000 watchdog[4628]:  no repair binary files
Oct 11 01:27:03 IQ138000 watchdog[4628]:  error retry time-out = 30 seconds
Oct 11 01:27:03 IQ138000 watchdog[4628]:  repair attempts = 1
Oct 11 01:27:03 IQ138000 watchdog[4628]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:27:03 IQ138000 watchdog[4628]: watchdog now set to 120 seconds
Oct 11 01:27:03 IQ138000 watchdog[4628]: hardware watchdog identity: WBEC WDT
Oct 11 01:27:03 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:27:03 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:27:03 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:27:03 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:27:03 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:27:03 IQ138000 systemd[1]: Startup finished in 3.801s (kernel) + 50.154s (userspace) = 53.955s.
Oct 11 01:27:03 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:03 IQ138000 wb-rules[4608]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:27:03 IQ138000 wb-rules[4608]: INFO: driver is created
Oct 11 01:27:03 IQ138000 wb-rules[4608]: INFO: driver loop is started
Oct 11 01:27:03 IQ138000 wb-rules[4608]: INFO: wait for driver to become ready
Oct 11 01:27:03 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] rules-IQ138000-4608: MQTT connection established
Oct 11 01:27:03 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:03 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:03 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:03 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:27:04 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-rules[4608]: INFO: driver is ready
Oct 11 01:27:05 IQ138000 wb-rules[4608]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:27:05 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4608: MQTT connection established
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:27:05 IQ138000 wb-rules[4608]: INFO: [engine] Starting main loop
Oct 11 01:27:05 IQ138000 wb-rules[4608]: INFO: the engine is ready
Oct 11 01:27:05 IQ138000 wb-rules[4608]: INFO: [engine] Starting sync loop
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:27:06 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:27:06 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 0a:57:58:15:3f:7e
Oct 11 01:27:06 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:27:06 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:27:06 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:27:06 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:06 IQ138000 NetworkManager[405]: <info>  [1760146026.4503] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:27:06 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:27:06 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:27:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:27:06 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:27:06 IQ138000 systemd-udevd[4827]: Using default interface naming scheme 'v247'.
Oct 11 01:27:06 IQ138000 systemd-udevd[4827]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:06 IQ138000 wb-rules[4608]: WARNING: [rule warning] DAC: no config file
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:07 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 01:27:08 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:27:08 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:27:08 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:08 IQ138000 knxd[5007]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:27:08 IQ138000 knxd[5007]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:27:08 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:27:08 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:27:08 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:27:08 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:27:08 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:08 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:27:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:27:09 IQ138000 wb-gsm[5014]: mm_on: Waiting for modem to start
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:27:09 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:09 IQ138000 wb-rules[4608]: INFO: all rule files are loaded
Oct 11 01:27:09 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 python3[1935]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:27:10 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:11 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:11 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:12 IQ138000 npm[3675]: [2025-10-11 01:27:12] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:27:12 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:12 IQ138000 npm[3675]: [2025-10-11 01:27:12] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:27:12 IQ138000 npm[3675]: [2025-10-11 01:27:12] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:12 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:27:13 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:13 IQ138000 npm[3675]: [2025-10-11 01:27:13] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:27:14 IQ138000 npm[3675]: [2025-10-11 01:27:14] info:         zh:zstack:znp: Serialport opened
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:27:14 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:27:14 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:16 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:17 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:27:17.185+00:00
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:27:17.185Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146217198,"cmd_timestamp_ms":1760146037198,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146217198,"cmd_timestamp_ms":1760146037198,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:27:17.432+00:00
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:27:17.432Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146217453,"cmd_timestamp_ms":1760146037453,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146217453,"cmd_timestamp_ms":1760146037453,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:27:17.577+00:00
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:27:17.577Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217593,"cmd_timestamp_ms":1760146037593,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217593,"cmd_timestamp_ms":1760146037593,"source":"schedule"}
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: Currently 4 devices are joined.
Oct 11 01:27:17 IQ138000 npm[3675]: [2025-10-11 01:27:17] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:27:17.719+00:00
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:27:17.719Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217744,"cmd_timestamp_ms":1760146037744,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217744,"cmd_timestamp_ms":1760146037744,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:27:17.855+00:00
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:27:17.855Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217882,"cmd_timestamp_ms":1760146037882,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217882,"cmd_timestamp_ms":1760146037882,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:27:17.969+00:00
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:27:17.969Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217989,"cmd_timestamp_ms":1760146037989,"source":"schedule"}
Oct 11 01:27:17 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146217989,"cmd_timestamp_ms":1760146037989,"source":"schedule"}
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m: Connected to MQTT server
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:27:18.113+00:00
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:27:18.113Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146218135,"cmd_timestamp_ms":1760146038135,"source":"schedule"}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146218135,"cmd_timestamp_ms":1760146038135,"source":"schedule"}
Oct 11 01:27:18 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:27:18.305+00:00
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:27:18.305Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146218322,"cmd_timestamp_ms":1760146038322,"source":"schedule"}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146218322,"cmd_timestamp_ms":1760146038322,"source":"schedule"}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:27:18 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:18 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:27:18 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:27:18 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m: Started frontend on port 8282
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:27:18 IQ138000 npm[3675]: [2025-10-11 01:27:18] info:         z2m: Zigbee2MQTT started!
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:27:18 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:27:18 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:27:18 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:27:18.856+00:00
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:27:18.856Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146218876,"cmd_timestamp_ms":1760146038876,"source":"schedule"}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146218876,"cmd_timestamp_ms":1760146038876,"source":"schedule"}
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:27:18.905+00:00
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:27:18.905Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:27:18 IQ138000 knxd[5193]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:27:18 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146218924,"cmd_timestamp_ms":1760146038924,"source":"schedule"}
Oct 11 01:27:18 IQ138000 knxd[5193]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:27:18 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146218924,"cmd_timestamp_ms":1760146038924,"source":"schedule"}
Oct 11 01:27:18 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:27:18 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:27:19 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 16 input(s) @ 8720 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:27:19.129+00:00
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:27:19.129Z","to":"2025-10-11T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146219145,"cmd_timestamp_ms":1760146039145,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146219145,"cmd_timestamp_ms":1760146039145,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:27:19 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:19 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:27:19.314+00:00
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:27:19.314Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146219323,"cmd_timestamp_ms":1760146039323,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146219323,"cmd_timestamp_ms":1760146039323,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:27:19.563+00:00
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:27:19.563Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146219574,"cmd_timestamp_ms":1760146039574,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146219574,"cmd_timestamp_ms":1760146039574,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:27:19.709+00:00
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:27:19.709Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146219719,"cmd_timestamp_ms":1760146039719,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146219719,"cmd_timestamp_ms":1760146039719,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:27:19.883+00:00
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:27:19.883Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146219897,"cmd_timestamp_ms":1760146039897,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146219897,"cmd_timestamp_ms":1760146039897,"source":"schedule"}
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:27:19 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:27:20 IQ138000 wb-watchdog[5247]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:27:20 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:27:20 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:27:20 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:27:21 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:21 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:27:21 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:27:21 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:27:21 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:27:22 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:22 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:27:22 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:27:22 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:23 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:23 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:24 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:24 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:25 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:25 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:25 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:26 IQ138000 ModemManager[471]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:27:26 IQ138000 ModemManager[471]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 01:27:26 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:26 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:27:26 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:27 IQ138000 ModemManager[471]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:27:27 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:27:27 IQ138000 python3[1935]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:27:27 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:27:27 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:27:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:27:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:27:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:27:28 IQ138000 ModemManager[471]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7393] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7418] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7437] device (ttyUSB1): modem state 'enabling'
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7465] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7487] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7520] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7526] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:28 IQ138000 NetworkManager[405]: <info>  [1760146048.7545] manager: NetworkManager state is now CONNECTING
Oct 11 01:27:28 IQ138000 ModemManager[471]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 01:27:28 IQ138000 wb-mqtt-nm-helper[2011]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:27:28 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:28 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:28 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:28 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:28 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:28 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:28 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:28 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:28 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:28 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:28 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:28 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:28 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:28 IQ138000 python3[1935]:            |                state: enabling
Oct 11 01:27:28 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:28 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:28 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:28 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:28 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:28 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:28 IQ138000 python3[1935]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:27:28 IQ138000 ModemManager[471]: <info>  [modem0] power state updated: on
Oct 11 01:27:28 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:28 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:29 IQ138000 python3[1935]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:27:29 IQ138000 python3[1935]:  successfully requested primary SIM switch in modem
Oct 11 01:27:29 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 01:27:29 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:27:29 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:27:29 IQ138000 knxd[5390]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:27:29 IQ138000 knxd[5390]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:27:29 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:27:29 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:27:29 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:27:29 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:29 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:29 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:29 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:30 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:30 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:30 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:30 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:32 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:27:32 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:27:32 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:32 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:27:32 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:27:32 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:27:32 IQ138000 lsyncd[5425]: 01:27:32 Normal: --- Startup ---
Oct 11 01:27:32 IQ138000 lsyncd[5425]: 01:27:32 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:27:32 IQ138000 lsyncd[5425]: journal
Oct 11 01:27:32 IQ138000 lsyncd[5425]: iq_network_manager/iq_network_manager.log
Oct 11 01:27:32 IQ138000 lsyncd[5425]: messages
Oct 11 01:27:32 IQ138000 lsyncd[5428]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:27:32 IQ138000 lsyncd[5427]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:27:32 IQ138000 lsyncd[5427]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:27:32 IQ138000 lsyncd[5425]: 01:27:32 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:27:32 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:27:32 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect started...
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (6/10): register
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 01:27:33 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:27:33 IQ138000 wb-mqtt-serial[1656]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:27:33 IQ138000 wb-mqtt-serial[1656]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 01:27:33 IQ138000 NetworkManager[405]: <info>  [1760146053.6028] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:33 IQ138000 NetworkManager[405]: <info>  [1760146053.6040] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:27:33 IQ138000 NetworkManager[405]: <info>  [1760146053.6075] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 01:27:33 IQ138000 NetworkManager[405]: <info>  [1760146053.6096] ppp-manager: starting PPP connection
Oct 11 01:27:33 IQ138000 NetworkManager[405]: <info>  [1760146053.6228] ppp-manager: pppd started with pid 5437
Oct 11 01:27:33 IQ138000 pppd[5437]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:27:33 IQ138000 NetworkManager[5437]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: initializing
Oct 11 01:27:33 IQ138000 pppd[5437]: pppd 2.4.9 started by root, uid 0
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:27:33 IQ138000 pppd[5437]: Using interface ppp0
Oct 11 01:27:33 IQ138000 NetworkManager[5437]: Using interface ppp0
Oct 11 01:27:33 IQ138000 NetworkManager[5437]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:27:33 IQ138000 pppd[5437]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:27:33 IQ138000 NetworkManager[405]: <info>  [1760146053.6906] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:27:33 IQ138000 pppd[5437]: PAP authentication succeeded
Oct 11 01:27:33 IQ138000 NetworkManager[5437]: PAP authentication succeeded
Oct 11 01:27:33 IQ138000 pppd[5437]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:27:33 IQ138000 pppd[5437]: kernel does not support PPP filtering
Oct 11 01:27:33 IQ138000 NetworkManager[5437]: kernel does not support PPP filtering
Oct 11 01:27:33 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 01:27:33 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 01:27:33 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:27:33 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:27:33 IQ138000 ModemManager[471]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 01:27:34 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:27:34 IQ138000 pppd[5437]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:27:34 IQ138000 NetworkManager[5437]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:27:34 IQ138000 pppd[5437]: local  IP address 10.198.52.231
Oct 11 01:27:34 IQ138000 NetworkManager[5437]: local  IP address 10.198.52.231
Oct 11 01:27:34 IQ138000 NetworkManager[5437]: remote IP address 10.64.64.64
Oct 11 01:27:34 IQ138000 NetworkManager[5437]: primary   DNS address 172.23.10.131
Oct 11 01:27:34 IQ138000 NetworkManager[5437]: secondary DNS address 172.23.10.130
Oct 11 01:27:34 IQ138000 pppd[5437]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:27:34 IQ138000 pppd[5437]: remote IP address 10.64.64.64
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.2687] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:27:34 IQ138000 pppd[5437]: primary   DNS address 172.23.10.131
Oct 11 01:27:34 IQ138000 pppd[5437]: secondary DNS address 172.23.10.130
Oct 11 01:27:34 IQ138000 pppd[5437]: nm-ppp-plugin: ip-up event
Oct 11 01:27:34 IQ138000 pppd[5437]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.2856] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.2867] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.2913] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.3017] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:27:34 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:27:34 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.3419] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:34 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:27:34 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:27:34 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:27:34 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.4439] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.4452] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.4473] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.4493] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:27:34 IQ138000 NetworkManager[405]: <info>  [1760146054.4550] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:27:34 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:34 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:34 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:34 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:34 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 vnstatd[1646]: Info: Interface "ppp0" enabled.
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:35 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:36 IQ138000 ntpd[1647]: Listen normally on 4 ppp0 10.198.52.231:123
Oct 11 01:27:36 IQ138000 ntpd[1647]: new interface(s) found: waking up resolver
Oct 11 01:27:36 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:36 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:36 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:36 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:36 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:38 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:39 IQ138000 python3[1935]: Выполнение: mmcli -i any
Oct 11 01:27:39 IQ138000 python3[1935]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 01:27:39 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:39 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:27:39 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:27:39 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:27:39 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:27:39 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:27:39 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:39 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:39 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:39 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:39 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:39 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:39 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:39 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:39 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:39 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:39 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:39 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:39 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:39 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:39 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:27:39 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:39 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:27:39 IQ138000 python3[1935]:            |       signal quality: 90% (recent)
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:39 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:39 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:27:39 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:27:39 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:27:39 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:39 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:39 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:27:39 IQ138000 python3[1935]: Current state: home
Oct 11 01:27:39 IQ138000 python3[1935]: SIM registered in the network.
Oct 11 01:27:39 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:39 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:39 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:39 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:39 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:39 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:39 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:39 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:39 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:39 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:39 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:39 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:39 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:39 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:39 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:27:39 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:39 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:27:39 IQ138000 python3[1935]:            |       signal quality: 90% (recent)
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:39 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:39 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:27:39 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:27:39 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:27:39 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:39 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:39 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:39 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:27:39 IQ138000 python3[1935]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:39 IQ138000 python3[1935]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:27:39 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:39 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:27:39 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:27:39 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:27:39 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:27:39 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:27:39 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:27:39 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 01:27:39 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:27:39 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:27:39 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:27:39 IQ138000 wb-mqtt-knx[2141]: INFO: knxd connected successfully
Oct 11 01:27:39 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:40 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:40 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:42 IQ138000 ntpd[1647]: Soliciting pool server 87.103.245.205
Oct 11 01:27:42 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:27:43 IQ138000 ntpd[1647]: Soliciting pool server 91.206.16.3
Oct 11 01:27:43 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:44 IQ138000 ntpd[1647]: Soliciting pool server 188.68.222.140
Oct 11 01:27:44 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:44 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:44 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:44 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:44 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:44 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:44 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:44 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:44 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:44 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:44 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:44 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:44 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:44 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:44 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:44 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:27:44 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:44 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:27:44 IQ138000 python3[1935]:            |       signal quality: 90% (recent)
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:44 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:44 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:27:44 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:27:44 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:27:44 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:44 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:44 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:44 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:27:44 IQ138000 python3[1935]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:44 IQ138000 python3[1935]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:27:44 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:44 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:27:44 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:27:44 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:27:44 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:27:44 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:27:44 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:27:44 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 4 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:45 IQ138000 ntpd[1647]: Soliciting pool server 162.159.200.123
Oct 11 01:27:45 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:27:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:27:45 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:46 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:47 IQ138000 ntpd[1647]: Soliciting pool server 92.255.126.17
Oct 11 01:27:47 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 17 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:48 IQ138000 ntpd[1647]: Soliciting pool server 185.209.85.222
Oct 11 01:27:48 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:48 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:49 IQ138000 ntpd[1647]: Soliciting pool server 151.0.2.54
Oct 11 01:27:49 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:49 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:49 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:49 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:49 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:49 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:49 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:49 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:49 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:49 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:49 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:49 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:49 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:49 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:49 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:27:49 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:49 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:27:49 IQ138000 python3[1935]:            |       signal quality: 93% (recent)
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:49 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:49 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:27:49 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:27:49 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:27:49 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:49 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:49 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:49 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:27:49 IQ138000 python3[1935]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:49 IQ138000 python3[1935]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:27:49 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:49 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:27:49 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:27:49 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:27:49 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:27:49 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:27:49 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:27:50 IQ138000 ntpd[1647]: Soliciting pool server 178.186.166.30
Oct 11 01:27:49 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:50 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:51 IQ138000 ntpd[1647]: Soliciting pool server 80.66.81.211
Oct 11 01:27:51 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:52 IQ138000 ntpd[1647]: Soliciting pool server 94.141.164.123
Oct 11 01:27:52 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:52 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 4 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:53 IQ138000 ntpd[1647]: Soliciting pool server 92.255.126.2
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:53 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:53 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:54 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:54 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:54 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:54 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:54 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:54 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:54 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:54 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:54 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:54 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:54 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:54 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:54 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:54 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:27:54 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:54 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:27:54 IQ138000 python3[1935]:            |       signal quality: 93% (recent)
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:54 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:54 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:27:54 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:27:54 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:27:54 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:54 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:54 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:54 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:27:54 IQ138000 python3[1935]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:54 IQ138000 python3[1935]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:27:54 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:54 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:27:54 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:27:54 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:27:54 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:27:54 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:27:54 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 ntpd[1647]: Soliciting pool server 83.243.68.157
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:54 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:27:55 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 17 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:27:56 IQ138000 ntpd[1647]: Soliciting pool server 82.146.53.58
Oct 11 01:27:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:56 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:57 IQ138000 ntpd[1647]: Soliciting pool server 85.142.100.8
Oct 11 01:27:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:57 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:27:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:27:58 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:27:59 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:27:59 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:27:59 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:27:59 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:27:59 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:27:59 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:27:59 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:27:59 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:27:59 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:27:59 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:27:59 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:27:59 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:27:59 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:27:59 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:27:59 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:27:59 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:27:59 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:27:59 IQ138000 python3[1935]:            |       signal quality: 93% (recent)
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:27:59 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:27:59 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:27:59 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:27:59 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:27:59 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:59 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:27:59 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:27:59 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:27:59 IQ138000 python3[1935]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:59 IQ138000 python3[1935]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:27:59 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:27:59 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:27:59 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:27:59 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:27:59 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:27:59 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:27:59 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:27:59 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:28:00 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:28:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 5 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:28:01 IQ138000 ntpd[1647]: Soliciting pool server 89.169.135.41
Oct 11 01:28:01 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:28:02 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:28:02 IQ138000 wb-mqtt-serial[1656]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:28:04 IQ138000 python3[1935]: Выполнение: mmcli -m wbc
Oct 11 01:28:04 IQ138000 python3[1935]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:28:04 IQ138000 python3[1935]:    --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:28:04 IQ138000 python3[1935]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:28:04 IQ138000 python3[1935]:            |                model: A7602E-H
Oct 11 01:28:04 IQ138000 python3[1935]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:28:04 IQ138000 python3[1935]:            |            supported: gsm-umts
Oct 11 01:28:04 IQ138000 python3[1935]:            |              current: gsm-umts
Oct 11 01:28:04 IQ138000 python3[1935]:            |         equipment id: 860803062234204
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   System   |               device: wbc
Oct 11 01:28:04 IQ138000 python3[1935]:            |              drivers: option, rndis_host
Oct 11 01:28:04 IQ138000 python3[1935]:            |               plugin: simtech
Oct 11 01:28:04 IQ138000 python3[1935]:            |         primary port: ttyUSB1
Oct 11 01:28:04 IQ138000 python3[1935]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:28:04 IQ138000 python3[1935]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:28:04 IQ138000 python3[1935]:            |                state: connected
Oct 11 01:28:04 IQ138000 python3[1935]:            |          power state: on
Oct 11 01:28:04 IQ138000 python3[1935]:            |          access tech: lte
Oct 11 01:28:04 IQ138000 python3[1935]:            |       signal quality: 93% (recent)
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:28:04 IQ138000 python3[1935]:            |              current: allowed: any; preferred: none
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   3GPP     |                 imei: 860803062234204
Oct 11 01:28:04 IQ138000 python3[1935]:            |          operator id: 25099
Oct 11 01:28:04 IQ138000 python3[1935]:            |        operator name: beeline
Oct 11 01:28:04 IQ138000 python3[1935]:            |         registration: home
Oct 11 01:28:04 IQ138000 python3[1935]:            | packet service state: attached
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:28:04 IQ138000 python3[1935]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:28:04 IQ138000 python3[1935]:            |                       slot 2: none
Oct 11 01:28:04 IQ138000 python3[1935]:   --------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:28:04 IQ138000 python3[1935]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:28:04 IQ138000 python3[1935]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:28:04 IQ138000 python3[1935]:    -------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:28:04 IQ138000 python3[1935]:   -------------------------------
Oct 11 01:28:04 IQ138000 python3[1935]:   Properties |            active: yes
Oct 11 01:28:04 IQ138000 python3[1935]:              |              imsi: 250997340491874
Oct 11 01:28:04 IQ138000 python3[1935]:              |             iccid: 8970199210429593744
Oct 11 01:28:04 IQ138000 python3[1935]:              |       operator id: 25099
Oct 11 01:28:04 IQ138000 python3[1935]:              |     operator name: Beeline
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:05 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:28:06 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:28:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:28:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:28:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:28:07 IQ138000 wb-mqtt-serial[1656]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
-- Boot 727a50f04f1b43169e1042dc14202d90 --
Oct 11 01:29:48 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:29:48 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:29:48 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:29:48 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:29:48 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:29:48 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:29:48 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:29:48 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:29:48 IQ138000 kernel: Zone ranges:
Oct 11 01:29:48 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:29:48 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:29:48 IQ138000 kernel: Movable zone start for each node
Oct 11 01:29:48 IQ138000 kernel: Early memory node ranges
Oct 11 01:29:48 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:29:48 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:29:48 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:29:48 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:29:48 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:29:48 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:29:48 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:29:48 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:29:48 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:29:48 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:29:48 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:29:48 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:29:48 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:29:48 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:29:48 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:29:48 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:29:48 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:29:48 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:29:48 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:29:48 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:29:48 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:29:48 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:29:48 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:29:48 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:29:48 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:29:48 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:29:48 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:29:48 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:29:48 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:29:48 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:29:48 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:29:48 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:29:48 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:29:48 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:29:48 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:29:48 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:29:48 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:29:48 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:29:48 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:29:48 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:29:48 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:29:48 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:29:48 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:29:48 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:29:48 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:29:48 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:29:48 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:29:48 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:29:48 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:29:48 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:29:48 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:29:48 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:29:48 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:29:48 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:29:48 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:29:48 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:29:48 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:29:48 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:29:48 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:29:48 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:29:48 IQ138000 kernel: No ATAGs?
Oct 11 01:29:48 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:29:48 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:29:48 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:29:48 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:29:48 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:29:48 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:29:48 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:29:48 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:29:48 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:29:48 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:29:48 IQ138000 kernel: PTP clock support registered
Oct 11 01:29:48 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:29:48 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:29:48 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:29:48 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:29:48 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:29:48 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:29:48 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:29:48 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:29:48 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:29:48 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:29:48 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:29:48 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:29:48 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:29:48 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:29:48 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:29:48 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:29:48 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:29:48 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:29:48 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:29:48 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:29:48 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:29:48 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:29:48 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:29:48 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:29:48 IQ138000 kernel: brd: module loaded
Oct 11 01:29:48 IQ138000 kernel: loop: module loaded
Oct 11 01:29:48 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:29:48 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:29:48 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:29:48 IQ138000 kernel: CAN device driver interface
Oct 11 01:29:48 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:29:48 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:29:48 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:29:48 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:29:48 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:29:48 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:29:48 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:29:48 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:29:48 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:29:48 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:29:48 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:29:48 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:29:48 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:29:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:29:48 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:29:48 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:29:48 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:29:48 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:29:48 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:29:48 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:29:48 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:29:48 IQ138000 kernel: can: controller area network core
Oct 11 01:29:48 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:29:48 IQ138000 kernel: can: raw protocol
Oct 11 01:29:48 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:29:48 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:29:48 IQ138000 kernel: can: SAE J1939
Oct 11 01:29:48 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:29:48 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:29:48 IQ138000 kernel: registered taskstats version 1
Oct 11 01:29:48 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:29:48 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:29:48 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:29:48 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:29:48 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:29:48 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:29:48 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:29:48 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:29:48 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:29:44 UTC (1760146184)
Oct 11 01:29:48 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:29:48 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:29:48 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:29:48 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:29:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:29:48 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:29:48 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:29:48 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:29:48 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:29:48 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:29:48 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:29:48 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:29:48 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:29:48 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:29:48 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: random: fast init done
Oct 11 01:29:48 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:29:48 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:29:48 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:29:48 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:29:48 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:29:48 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:29:48 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:29:48 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:29:48 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:29:48 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:29:48 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:29:48 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:29:48 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:29:48 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:29:48 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:29:48 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:29:48 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:29:48 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:29:48 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:29:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:29:48 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:29:48 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:29:48 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:29:48 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:29:48 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:29:48 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:29:48 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:29:48 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:29:48 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:29:48 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:29:48 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:29:48 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:29:48 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:29:48 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:29:48 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:29:48 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:29:48 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:29:48 IQ138000 kernel: of_cfs_init
Oct 11 01:29:48 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:29:48 IQ138000 kernel: ALSA device list:
Oct 11 01:29:48 IQ138000 kernel:   No soundcards found.
Oct 11 01:29:48 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:29:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:29:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:29:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:29:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:29:48 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:29:48 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:29:48 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:29:48 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:29:48 IQ138000 kernel:   with arguments:
Oct 11 01:29:48 IQ138000 kernel:     /sbin/init
Oct 11 01:29:48 IQ138000 kernel:   with environment:
Oct 11 01:29:48 IQ138000 kernel:     HOME=/
Oct 11 01:29:48 IQ138000 kernel:     TERM=linux
Oct 11 01:29:48 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:29:48 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:29:48 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:29:48 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:29:48 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:29:48 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:29:48 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:29:48 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:29:48 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:29:48 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:29:48 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:29:48 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:29:48 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:29:48 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:29:48 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:29:48 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:29:48 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:29:48 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:29:48 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:29:48 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:29:48 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:29:48 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:29:48 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:29:48 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:29:48 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:29:48 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:29:48 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:29:48 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:29:48 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:29:48 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:29:48 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:29:48 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:29:48 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:29:48 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:29:48 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:29:48 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:29:48 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:29:48 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:29:48 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:29:48 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:29:48 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:29:48 IQ138000 systemd-journald[138]: Journal started
Oct 11 01:29:48 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:29:48 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 01:29:48 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:29:48 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:29:48 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:29:48 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:29:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:29:48 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:29:48 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:29:49 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:29:49 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:29:49 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:29:49 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:29:49 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:29:49 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:29:49 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:29:49 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:29:49 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:29:49 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:29:49 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:29:49 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:29:49 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:29:49 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:29:49 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:29:49 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:29:49 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:29:50 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 01:29:50 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:29:50 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:29:50 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:29:50 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:29:50 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:29:50 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:29:50 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:29:50 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:29:50 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:29:50 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:29:50 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:29:50 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 01:29:50 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:29:50 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:29:50 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:29:50 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:29:50 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:29:50 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:29:50 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:29:50 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:29:50 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:29:50 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:29:50 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:29:51 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:29:51 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:29:51 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:29:51 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:29:51 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:29:51 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:29:51 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:29:51 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:29:51 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 01:29:51 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 01:29:51 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:29:51 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:29:51 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:29:51 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:29:51 IQ138000 systemd-udevd[162]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:29:51 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:29:51 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:29:51 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:29:51 IQ138000 systemd-fsck[213]: data: recovering journal
Oct 11 01:29:51 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:29:51 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:29:51 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:29:51 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:29:51 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:29:51 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:29:51 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:29:51 IQ138000 systemd-fsck[213]: data: clean, 16441/328656 files, 362339/1313536 blocks
Oct 11 01:29:51 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:29:51 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:29:51 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:29:51 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:29:51 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:29:51 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:29:51 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:29:51 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:29:51 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:29:51 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:29:51 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 48.757ms for 462 entries.
Oct 11 01:29:51 IQ138000 systemd-journald[138]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 470.4M, max 496.6M, 26.1M free.
Oct 11 01:29:51 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:29:52 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 01:29:52 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:29:52 IQ138000 kernel: random: crng init done
Oct 11 01:29:52 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:29:52 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:29:52 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:29:52 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:29:52 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:29:52 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:29:52 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:29:52 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:29:52 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:29:52 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:29:52 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:29:53 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:29:53 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:29:53 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:29:53 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:29:53 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:29:53 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:29:53 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:29:53 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:29:53 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:29:53 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:29:53 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:29:53 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:29:53 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:29:53 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:29:53 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:29:53 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:29:53 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:29:53 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:29:53 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:29:53 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:29:53 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 01:29:53 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:29:53 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:29:53 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 01:29:53 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:29:53 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:29:53 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:29:53 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:29:53 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:29:53 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 01:29:53 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:29:53 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:29:53 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:29:53 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 01:29:53 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:29:53 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:29:53 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:29:53 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:29:53 IQ138000 migrate.sh[322]: Error: No such file or directory
Oct 11 01:29:53 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:29:53 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:29:53 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:29:53 IQ138000 migrate.sh[330]: Error: No such file or directory
Oct 11 01:29:53 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:29:54 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:29:54 IQ138000 migrate.sh[343]: Error: No such file or directory
Oct 11 01:29:54 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:29:54 IQ138000 reverse-ssh.sh[346]: Error: No such file or directory
Oct 11 01:29:54 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:29:54 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:29:54 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:29:54 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:29:54 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:29:54 IQ138000 migrate.sh[360]: Error: No such file or directory
Oct 11 01:29:54 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:29:54 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:29:54 IQ138000 rules-preprocessor[339]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:29:54 IQ138000 rules-preprocessor[339]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Successfully dropped root privileges.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: avahi-daemon 0.8 starting up.
Oct 11 01:29:54 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:29:54 IQ138000 migrate.sh[370]: Error: No such file or directory
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Successfully called chroot().
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Successfully dropped remaining capabilities.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: No service file found in /etc/avahi/services.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:29:54 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Network interface enumeration completed.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Registering new address record for ::1 on lo.*.
Oct 11 01:29:54 IQ138000 avahi-daemon[363]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:29:54 IQ138000 wb-watch-configs[385]: Watched dirs: /etc /etc/network
Oct 11 01:29:54 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:29:54 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:29:54 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 01:29:54 IQ138000 wpa_supplicant[379]: Successfully initialized wpa_supplicant
Oct 11 01:29:54 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:29:54 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:29:54 IQ138000 systemd-logind[344]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:29:54 IQ138000 systemd-logind[344]: New seat seat0.
Oct 11 01:29:54 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:29:54 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:29:54 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:29:54 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:29:54 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:29:54 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:29:54 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:29:54 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:29:54 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:29:54 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:29:54 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:29:54 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:29:54 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:29:54 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:29:54 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:29:54 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:29:54 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:29:54 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:29:54 IQ138000 NetworkManager[403]: <info>  [1760146194.9089] NetworkManager (version 1.42.4) is starting... (boot:727a50f0-4f1b-4316-9e10-42dc14202d90)
Oct 11 01:29:54 IQ138000 NetworkManager[403]: <info>  [1760146194.9092] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:29:54 IQ138000 NetworkManager[403]: <info>  [1760146194.9212] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:29:54 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:29:54 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:29:54 IQ138000 NetworkManager[403]: <info>  [1760146194.9654] manager[0x686900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:29:55 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:29:55 IQ138000 monit[323]: Starting daemon monitor: monit.
Oct 11 01:29:55 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:29:55 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:29:55 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:29:55 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:29:55 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:29:55 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:29:55 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:29:55 IQ138000 avahi-daemon[363]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3372280056.
Oct 11 01:29:55 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:29:55 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:29:55 IQ138000 ModemManager[481]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:29:55 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:29:55 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7133] hostname: hostname: using hostnamed
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7136] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7194] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7270] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7288] manager[0x686900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7291] manager[0x686900]: rfkill: WWAN hardware radio set enabled
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7554] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7630] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7675] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:29:55 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7925] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.7990] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8038] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8062] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8090] manager: Networking is enabled by state file
Oct 11 01:29:55 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8213] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8224] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8234] ifupdown: management mode: unmanaged
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8244] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.8253] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:29:55 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9018] dhcp: init: Using DHCP client 'internal'
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9041] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9207] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9289] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:29:55 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:29:55 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9392] device (lo): Activation: starting connection 'lo' (af82ebb8-b613-40d4-b611-117f88692c19)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9572] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:29:55 IQ138000 NetworkManager[403]: <info>  [1760146195.9618] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.3326] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.3345] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.3435] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.3517] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:29:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:29:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:29:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:29:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:29:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.5546] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.5613] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.5675] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:29:56 IQ138000 NetworkManager[403]: <info>  [1760146196.5707] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:29:56 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:29:57 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.3721] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.3773] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.3800] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.4449] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.4473] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.4491] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.5046] modem-manager: ModemManager available
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.5065] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.5189] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.5212] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.5263] device (lo): Activation: successful, device activated.
Oct 11 01:29:57 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8571] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8578] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8676] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8704] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8789] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8806] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8838] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8874] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8928] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.8985] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.9018] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:29:57 IQ138000 NetworkManager[403]: <info>  [1760146197.9073] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:29:58 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:29:58 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:29:58 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:30:01 IQ138000 init.sh[1317]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:30:01 IQ138000 init.sh[1332]: In file included from -:16:
Oct 11 01:30:01 IQ138000 init.sh[1332]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:01 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:30:01 IQ138000 init.sh[1317]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:30:01 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:30:01 IQ138000 init.sh[1317]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:30:01 IQ138000 init.sh[1392]: In file included from -:11:
Oct 11 01:30:01 IQ138000 init.sh[1392]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:01 IQ138000 init.sh[1317]: ...
Oct 11 01:30:01 IQ138000 init.sh[1407]: In file included from -:11:
Oct 11 01:30:01 IQ138000 init.sh[1407]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:02 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 01:30:02 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 01:30:02 IQ138000 init.sh[1317]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:30:02 IQ138000 init.sh[1427]: In file included from -:24:
Oct 11 01:30:02 IQ138000 init.sh[1427]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:02 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:30:02 IQ138000 init.sh[1317]: ...
Oct 11 01:30:02 IQ138000 init.sh[1442]: In file included from -:24:
Oct 11 01:30:02 IQ138000 init.sh[1442]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:03 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 01:30:03 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 01:30:03 IQ138000 init.sh[1317]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:30:03 IQ138000 init.sh[1465]: In file included from -:11:
Oct 11 01:30:03 IQ138000 init.sh[1465]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:03 IQ138000 init.sh[1317]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:30:03 IQ138000 init.sh[1488]: In file included from -:11:
Oct 11 01:30:03 IQ138000 init.sh[1488]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:30:03 IQ138000 init.sh[1317]: ...
Oct 11 01:30:03 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:30:03 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:30:03 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:30:03 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:30:03 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:30:04 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:30:04 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:30:04 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:30:04 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:30:04 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:30:04 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:30:04 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:30:04 IQ138000 knxd[1602]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:30:04 IQ138000 knxd[1602]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:30:04 IQ138000 lsyncd[1607]: 01:30:04 Normal: --- Startup ---
Oct 11 01:30:04 IQ138000 lsyncd[1607]: 01:30:04 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:30:04 IQ138000 lsyncd[1607]: journal
Oct 11 01:30:04 IQ138000 lsyncd[1607]: iq_network_manager/iq_network_manager.log
Oct 11 01:30:04 IQ138000 lsyncd[1607]: messages
Oct 11 01:30:04 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:30:04 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:30:04 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:30:04 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:30:04 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:30:04 IQ138000 lsyncd[1626]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:30:04 IQ138000 lsyncd[1618]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:30:04 IQ138000 lsyncd[1618]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:30:04 IQ138000 ntpd[1619]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:30:04 IQ138000 lsyncd[1607]: 01:30:04 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:30:04 IQ138000 ntpd[1619]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:30:04 IQ138000 ntpd[1619]: ----------------------------------------------------
Oct 11 01:30:04 IQ138000 ntpd[1619]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:30:04 IQ138000 ntpd[1619]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:30:04 IQ138000 ntpd[1619]: corporation.  Support and training for ntp-4 are
Oct 11 01:30:04 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:30:04 IQ138000 ntpd[1619]: available at https://www.nwtime.org/support
Oct 11 01:30:04 IQ138000 ntpd[1619]: ----------------------------------------------------
Oct 11 01:30:04 IQ138000 ntpd[1642]: proto: precision = 1.042 usec (-20)
Oct 11 01:30:04 IQ138000 ntpd[1642]: basedate set to 2020-09-11
Oct 11 01:30:04 IQ138000 ntpd[1642]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:30:04 IQ138000 ntpd[1642]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:30:04 IQ138000 ntpd[1642]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:30:04 IQ138000 ntpd[1642]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:30:04 IQ138000 ntpd[1642]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:30:04 IQ138000 ntpd[1642]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:30:04 IQ138000 ntpd[1642]: Listen normally on 3 lo [::1]:123
Oct 11 01:30:04 IQ138000 ntpd[1642]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:30:04 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:30:04 IQ138000 persist_meter_data.sh[1640]: Error: No such file or directory
Oct 11 01:30:04 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:30:04 IQ138000 wb-knxd-config.sh[1517]: No /dev/ttyKNX found, disabling level2
Oct 11 01:30:04 IQ138000 wb-knxd-config.sh[1517]: Restart knxd
Oct 11 01:30:04 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:30:04 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:30:04 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:30:05 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:30:05 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:30:05 IQ138000 wb-mqtt-w1[1678]: MQTT broker localhost:1883
Oct 11 01:30:05 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:05 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:30:05 IQ138000 wb-mqtt-w1[1678]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:30:05 IQ138000 wb-mqtt-w1[1678]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:30:05 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:30:05 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:30:05 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:30:05 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:30:05 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:30:05 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:30:05 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:30:05 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:05 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:30:05 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:30:05 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:30:05 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:30:05 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:05 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:30:05 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:30:05 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:30:05 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:30:05 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:30:05 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:30:05 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:30:05 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:30:05 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:30:05 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:30:05 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:30:05 IQ138000 vnstatd[1648]: Info: vnStat daemon 2.6 started. (pid:1648 uid:110 gid:117 64-bit)
Oct 11 01:30:05 IQ138000 vnstatd[1648]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:30:05 IQ138000 vnstatd[1648]: Info: Interface "ppp0" disabled.
Oct 11 01:30:05 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:30:05 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:30:05 IQ138000 ntpd[1642]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:30:05 IQ138000 sshd[1723]: Server listening on 0.0.0.0 port 22.
Oct 11 01:30:05 IQ138000 sshd[1723]: Server listening on :: port 22.
Oct 11 01:30:05 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:30:05 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:05 IQ138000 wb-connection-manager[1505]: Connection LegacyWiFi not found, skipping
Oct 11 01:30:05 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:30:05 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:30:05 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:30:06 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:30:06 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:30:06 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:30:06 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:30:06 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:30:06 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:30:06 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:30:06 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:30:06 IQ138000 reverse-ssh.sh[1835]: Error: No such file or directory
Oct 11 01:30:06 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:30:06 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:06 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:30:06 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:30:06 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:06 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:30:06 IQ138000 wb-adjust-systime[1832]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:30:06 IQ138000 wpa_supplicant[379]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:30:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:30:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:30:06 IQ138000 mosquitto[1868]: 1760146206: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:30:06 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:30:06 IQ138000 ntpd[1642]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:30:06 IQ138000 wb-adjust-systime[1832]: Drift file is valid (was recently edited)
Oct 11 01:30:06 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:30:06 IQ138000 knxd[1883]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:30:06 IQ138000 knxd[1883]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:30:06 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:30:06 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:06 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:30:06 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:30:06 IQ138000 NetworkManager[403]: <error> [1760146206.9236] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:30:06 IQ138000 NetworkManager[403]: <info>  [1760146206.9238] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1505 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:30:06 IQ138000 wb-connection-manager[1505]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:30:06 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:30:07 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:30:07 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:30:07 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.5830] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.5856] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1505 uid=0 result="success"
Oct 11 01:30:07 IQ138000 wb-mqtt-knx[1966]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:07 IQ138000 wb-mqtt-knx[1966]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.5875] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: MQTT broker localhost:1883
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.5977] manager: NetworkManager state is now CONNECTING
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6153] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6259] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6266] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6564] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6765] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6917] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6929] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6935] Config: added 'scan_ssid' value '1'
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6937] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6939] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:07 IQ138000 NetworkManager[403]: <info>  [1760146207.6940] Config: added 'psk' value '<hidden>'
Oct 11 01:30:07 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:30:07 IQ138000 ntpd[1642]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:30:07 IQ138000 wb-mqtt-logs[1972]: MQTT broker localhost:1883
Oct 11 01:30:07 IQ138000 wb-mqtt-logs[1972]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:07 IQ138000 wb-mqtt-logs[1972]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:07 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:30:07 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] Create indices if necessary
Oct 11 01:30:07 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] Analyzing data table
Oct 11 01:30:07 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:30:08 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:30:08 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.540s CPU time.
Oct 11 01:30:08 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:30:08 IQ138000 NetworkManager[403]: <info>  [1760146208.4874] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:30:08 IQ138000 NetworkManager[403]: <info>  [1760146208.4877] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:30:08 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:08 IQ138000 wb-mqtt-confed[1943]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:08 IQ138000 ntpd[1642]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:08 IQ138000 wb-mqtt-confed[1943]: INFO: [wbgo_mqtt] confed-IQ138000-1943: MQTT connection established
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:30:08 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:30:08 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:30:09 IQ138000 wb-mqtt-logs[1972]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:09 IQ138000 wb-mqtt-logs[1972]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:09 IQ138000 wb-mqtt-logs[1972]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:09 IQ138000 wb-mqtt-logs[1972]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:30:09 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:30:09 IQ138000 wb-mqtt-opcua[2128]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:30:09 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:30:09 IQ138000 wb-mqtt-iec104[2144]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:30:09 IQ138000 wb-mqtt-mbgate[1977]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:30:09 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:30:09 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:30:10 IQ138000 wb-mqtt-opcua[2128]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:30:10 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:30:10 IQ138000 wb-mqtt-gpio[1842]: INFO: [gpio driver] Started
Oct 11 01:30:10 IQ138000 wb-mqtt-iec104[2144]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:30:10 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:30:10 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:30:10 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:30:10 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:30:10 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:10 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:30:10 IQ138000 wb-mqtt-knx[1966]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:10 IQ138000 wb-mqtt-knx[1966]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:10 IQ138000 wb-mqtt-knx[1966]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:10 IQ138000 wb-mqtt-knx[1966]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:30:10 IQ138000 wb-mqtt-knx[1966]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:30:10 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:30:12 IQ138000 python3[1927]: No data file found at /tmp/network_status_cache.json
Oct 11 01:30:12 IQ138000 python3[1927]: Connecting to MQTT
Oct 11 01:30:12 IQ138000 python3[1927]: Connected to MQTT
Oct 11 01:30:12 IQ138000 python3[1927]: Connection returned result: Connection Accepted.
Oct 11 01:30:13 IQ138000 NetworkManager[403]: <info>  [1760146213.1309] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:30:13 IQ138000 NetworkManager[403]: <info>  [1760146213.1346] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:30:14 IQ138000 wb-device-manager[1935]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:30:14 IQ138000 wb-device-manager[1935]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:30:14 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2003 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:30:14 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New virtual device lo af82ebb8-b613-40d4-b611-117f88692c19 /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:30:15 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New active connection lo af82ebb8-b613-40d4-b611-117f88692c19 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:30:15 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:15 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:16 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:30:16 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:30:16 IQ138000 kernel: dldo4: disabling
Oct 11 01:30:16 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 01:30:16 IQ138000 kernel: vcc-sd: disabling
Oct 11 01:30:16 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:30:16 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:30:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:30:16 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:30:17 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:30:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:30:17 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: MQTT broker localhost:1883
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:30:17 IQ138000 knxd[3082]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:30:17 IQ138000 knxd[3082]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:30:17 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:30:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:30:17 IQ138000 wb-mqtt-adc[3083]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:30:18 IQ138000 wb-mqtt-confed[1943]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] DB initialization is done
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:30:18 IQ138000 wb-mqtt-serial[1665]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:30:19 IQ138000 wb-gsm[3339]: main: Called from pid 1 (systemd)
Oct 11 01:30:19 IQ138000 wb-gsm[3373]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:30:19 IQ138000 wb-usb-otg-start.sh[3425]: : wb-usb-otg-start
Oct 11 01:30:19 IQ138000 wb-usb-otg-start.sh[3425]: main: setup_device()
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:30:19 IQ138000 wb-gsm[3446]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:30:19 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:30:20 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:30:20 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:30:20 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:30:20 IQ138000 kernel: using random self ethernet address
Oct 11 01:30:20 IQ138000 kernel: using random host ethernet address
Oct 11 01:30:20 IQ138000 wb-usb-otg-start.sh[3425]: main: enabling profile rndis
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:30:20 IQ138000 npm[1684]: > zigbee2mqtt@2.1.1 start
Oct 11 01:30:20 IQ138000 npm[1684]: > node index.js
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:30:20 IQ138000 systemd-udevd[3449]: Using default interface naming scheme 'v247'.
Oct 11 01:30:20 IQ138000 NetworkManager[403]: <info>  [1760146220.3800] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:30:20 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:30:20 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:30:20 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: DB logger started, go to main loop
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:20 IQ138000 NetworkManager[403]: <info>  [1760146220.6688] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:30:20 IQ138000 wb-gsm[3522]: should_enable: Should enable GSM modem
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:30:20 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:30:20 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:30:20 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:30:21 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:30:21 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:30:21 IQ138000 wb-gsm[3603]: main: Called from pid 3531 (wb-gsm-mm)
Oct 11 01:30:21 IQ138000 NetworkManager[403]: <info>  [1760146221.7841] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:30:21 IQ138000 NetworkManager[403]: <info>  [1760146221.7844] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:30:21 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:30:21 IQ138000 wb-gsm[3614]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:30:22 IQ138000 wb-gsm[3637]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:30:22 IQ138000 python3[1927]: Выполнение: service wb-connection-manager stop
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:30:22 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:30:23 IQ138000 ModemManager[481]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:30:23 IQ138000 npm[3495]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:30:23 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:30:24 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:30:25 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:30:25 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:30:25 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:30:25 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:25 IQ138000 wb-gsm[3996]: mm_off: Modem is already OFF
Oct 11 01:30:25 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:26 IQ138000 wb-gsm[4065]: main: Called from pid 3531 (wb-gsm-mm)
Oct 11 01:30:26 IQ138000 wb-gsm[4077]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:26 IQ138000 wb-gsm[4100]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:26 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:27 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:28 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:29 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:30 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:30 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:30 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:30:30 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:30:30 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:30 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:30 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:30 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:30 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:30:30 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:30:30 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:30:30 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:30:30 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:30 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:30:30 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:30 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:30:30 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:30:30 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:30 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:30:30 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:30:30 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:30:30 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:30:30 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:30:30 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:30:30 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:30:30 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.204s CPU time.
Oct 11 01:30:30 IQ138000 knxd[4486]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:30:30 IQ138000 knxd[4486]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:30:30 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:30:30 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:30 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:30:30 IQ138000 python3[1927]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:30:30 IQ138000 python3[1927]:  
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: MQTT broker localhost:1883
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: w1 thread Started
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:30:30 IQ138000 wb-mqtt-w1[4492]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:30:30 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:31 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:32 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:32 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:32 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:32 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <warn>  [1760146232.5285] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <info>  [1760146232.5287] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <info>  [1760146232.5305] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:30:32 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <warn>  [1760146232.5322] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <info>  [1760146232.5333] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:30:32 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <info>  [1760146232.5779] manager: startup complete
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <info>  [1760146232.5798] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:30:32 IQ138000 NetworkManager[403]: <info>  [1760146232.5800] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:30:32 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:30:32 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:30:32 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:30:32 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:30:32 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:30:33 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:30:33 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:30:33 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:30:33 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:30:33 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:30:33 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:30:34 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:30:35 IQ138000 python3[1927]: Выполнение: mmcli -m wbc
Oct 11 01:30:35 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:35 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:30:35 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:35 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:30:35 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:30:35 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:30:35 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:30:35 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:30:35 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:30:35 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:30:35 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:30:35 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:30:35 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:30:35 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:30:35 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:35 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:35 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:30:35 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:30:35 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:35 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:30:35 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:30:35 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:30:35 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:30:35 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:30:36 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:36 IQ138000 watchdog[4628]: starting daemon (5.16):
Oct 11 01:30:36 IQ138000 watchdog[4628]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:30:36 IQ138000 watchdog[4628]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:30:36 IQ138000 watchdog[4628]:  ping: no machine to check
Oct 11 01:30:36 IQ138000 watchdog[4628]:  file: no file to check
Oct 11 01:30:36 IQ138000 watchdog[4628]:  pidfile: /var/run/sshd.pid
Oct 11 01:30:36 IQ138000 watchdog[4628]:  interface: no interface to check
Oct 11 01:30:36 IQ138000 watchdog[4628]:  temperature: no sensors to check
Oct 11 01:30:36 IQ138000 watchdog[4628]:  no test binary files
Oct 11 01:30:36 IQ138000 watchdog[4628]:  no repair binary files
Oct 11 01:30:36 IQ138000 watchdog[4628]:  error retry time-out = 30 seconds
Oct 11 01:30:36 IQ138000 watchdog[4628]:  repair attempts = 1
Oct 11 01:30:36 IQ138000 watchdog[4628]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:30:36 IQ138000 watchdog[4628]: watchdog now set to 120 seconds
Oct 11 01:30:36 IQ138000 watchdog[4628]: hardware watchdog identity: WBEC WDT
Oct 11 01:30:36 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:30:36 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:36 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:30:36 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:30:36 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:30:36 IQ138000 systemd[1]: Startup finished in 3.804s (kernel) + 49.849s (userspace) = 53.654s.
Oct 11 01:30:36 IQ138000 wb-rules[4609]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:30:36 IQ138000 wb-rules[4609]: INFO: driver is created
Oct 11 01:30:36 IQ138000 wb-rules[4609]: INFO: [wbgo_mqtt] rules-IQ138000-4609: MQTT connection established
Oct 11 01:30:36 IQ138000 wb-rules[4609]: INFO: driver loop is started
Oct 11 01:30:36 IQ138000 wb-rules[4609]: INFO: wait for driver to become ready
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:36 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:30:37 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:30:38 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:38 IQ138000 wb-rules[4609]: INFO: driver is ready
Oct 11 01:30:38 IQ138000 wb-rules[4609]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:30:38 IQ138000 wb-rules[4609]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4609: MQTT connection established
Oct 11 01:30:38 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:38 IQ138000 wb-rules[4609]: INFO: [engine] Starting main loop
Oct 11 01:30:38 IQ138000 wb-rules[4609]: INFO: [engine] Starting sync loop
Oct 11 01:30:38 IQ138000 wb-rules[4609]: INFO: the engine is ready
Oct 11 01:30:38 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:38 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:38 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:38 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:30:39 IQ138000 wb-rules[4609]: WARNING: [rule warning] DAC: no config file
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:39 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:30:40 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:30:40 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:30:40 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:30:40 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:30:40 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:30:40 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, ba:67:ec:c2:ff:79
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:30:40 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:30:40 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:30:40 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:30:40 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:30:40 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:30:40 IQ138000 NetworkManager[403]: <info>  [1760146240.1468] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 systemd-udevd[4910]: Using default interface naming scheme 'v247'.
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 systemd-udevd[4910]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:40 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:30:40 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 knxd[4990]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:30:40 IQ138000 knxd[4990]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:30:40 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:40 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:40 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:30:40 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:30:41 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:41 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 python3[1927]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:30:42 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:42 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:43 IQ138000 wb-gsm[5018]: mm_on: Waiting for modem to start
Oct 11 01:30:43 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:43 IQ138000 wb-rules[4609]: INFO: all rule files are loaded
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:43 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:43 IQ138000 npm[3495]: [2025-10-11 01:30:43] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:30:43 IQ138000 npm[3495]: [2025-10-11 01:30:43] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:30:43 IQ138000 npm[3495]: [2025-10-11 01:30:43] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:44 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 01:30:44 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:44 IQ138000 npm[3495]: [2025-10-11 01:30:44] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:30:44 IQ138000 npm[3495]: [2025-10-11 01:30:44] info:         zh:zstack:znp: Serialport opened
Oct 11 01:30:45 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:45 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 01:30:46 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:30:46 IQ138000 wb-mqtt-serial[1665]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:30:47 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:30:47 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: Currently 4 devices are joined.
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:30:48 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: Connected to MQTT server
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:30:48 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:30:48 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:30:48 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:30:48 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:30:48 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: Started frontend on port 8282
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:30:48 IQ138000 npm[3495]: [2025-10-11 01:30:48] info:         z2m: Zigbee2MQTT started!
Oct 11 01:30:49 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:49 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:30:49 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:30:49 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:30:49 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:30:49 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:49 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:30:49 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:49 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:49 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:49 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:49 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:30:50.112+00:00
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:30:50.112Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146430128,"cmd_timestamp_ms":1760146250128,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146430128,"cmd_timestamp_ms":1760146250128,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:50 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:30:50 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:30:50.590+00:00
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:30:50.590Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146430602,"cmd_timestamp_ms":1760146250602,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760146430602,"cmd_timestamp_ms":1760146250602,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:30:50.763+00:00
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:30:50.763Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146430781,"cmd_timestamp_ms":1760146250781,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146430781,"cmd_timestamp_ms":1760146250781,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:30:50.954+00:00
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:30:50.954Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146430968,"cmd_timestamp_ms":1760146250968,"source":"schedule"}
Oct 11 01:30:50 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146430968,"cmd_timestamp_ms":1760146250968,"source":"schedule"}
Oct 11 01:30:51 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:30:51 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:30:51 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:30:51 IQ138000 knxd[5154]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:30:51 IQ138000 knxd[5154]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:30:51 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:30:51 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:30:51 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:30:51.099+00:00
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:30:51.099Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431115,"cmd_timestamp_ms":1760146251115,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431115,"cmd_timestamp_ms":1760146251115,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:30:51.225+00:00
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:30:51.225Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431238,"cmd_timestamp_ms":1760146251238,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431238,"cmd_timestamp_ms":1760146251238,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:30:51.413+00:00
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:30:51.413Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431427,"cmd_timestamp_ms":1760146251427,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431427,"cmd_timestamp_ms":1760146251427,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:30:51.564+00:00
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:30:51.564Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431582,"cmd_timestamp_ms":1760146251582,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760146431582,"cmd_timestamp_ms":1760146251582,"source":"schedule"}
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:30:51 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:51 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:30:51 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:30:52.006+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:30:52.006Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146432018,"cmd_timestamp_ms":1760146252018,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146432018,"cmd_timestamp_ms":1760146252018,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:30:52.203+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:30:52.203Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146432222,"cmd_timestamp_ms":1760146252222,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146432222,"cmd_timestamp_ms":1760146252222,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:30:52 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:30:52.351+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:30:52.351Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146432362,"cmd_timestamp_ms":1760146252362,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760146432362,"cmd_timestamp_ms":1760146252362,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:30:52.504+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:30:52.504Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146432515,"cmd_timestamp_ms":1760146252515,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146432515,"cmd_timestamp_ms":1760146252515,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:30:52 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:30:52.687+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:30:52.687Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146432702,"cmd_timestamp_ms":1760146252702,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760146432702,"cmd_timestamp_ms":1760146252702,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:30:52.808+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:30:52.808Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146432819,"cmd_timestamp_ms":1760146252819,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146432819,"cmd_timestamp_ms":1760146252819,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:30:52.978+00:00
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:30:52.978Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146432989,"cmd_timestamp_ms":1760146252989,"source":"schedule"}
Oct 11 01:30:52 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760146432989,"cmd_timestamp_ms":1760146252989,"source":"schedule"}
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:30:53 IQ138000 wb-watchdog[5231]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:30:53 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:53 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:30:54 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:30:54 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:30:54 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:54 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:54 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 wb-mqtt-serial[1665]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:30:55 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:56 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:30:56 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:56 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:57 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:58 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:30:58 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:30:59 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:31:00 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:00 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:31:00 IQ138000 ModemManager[481]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:31:00 IQ138000 ModemManager[481]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 01:31:00 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:01 IQ138000 ModemManager[481]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:31:01 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:31:01 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 01:31:01 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:31:01 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:31:01 IQ138000 knxd[5369]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:31:01 IQ138000 knxd[5369]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:31:01 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:31:01 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:31:01 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:31:01 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:31:01 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:01 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:31:02 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:31:02 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:02 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:31:02 IQ138000 python3[1927]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:31:02 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:31:02 IQ138000 ModemManager[481]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:31:02 IQ138000 ModemManager[481]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.7641] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.7711] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.7799] device (ttyUSB1): modem state 'enabling'
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.7881] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.7960] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.7995] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.8002] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:02 IQ138000 NetworkManager[403]: <info>  [1760146262.8020] manager: NetworkManager state is now CONNECTING
Oct 11 01:31:02 IQ138000 ModemManager[481]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 01:31:02 IQ138000 wb-mqtt-nm-helper[2003]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:31:02 IQ138000 ModemManager[481]: <info>  [modem0] power state updated: on
Oct 11 01:31:03 IQ138000 python3[1927]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:31:03 IQ138000 python3[1927]:    --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:31:03 IQ138000 python3[1927]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:31:03 IQ138000 python3[1927]:            |                model: A7602E-H
Oct 11 01:31:03 IQ138000 python3[1927]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:31:03 IQ138000 python3[1927]:            |            supported: gsm-umts
Oct 11 01:31:03 IQ138000 python3[1927]:            |              current: gsm-umts
Oct 11 01:31:03 IQ138000 python3[1927]:            |         equipment id: 860803062234204
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   System   |               device: wbc
Oct 11 01:31:03 IQ138000 python3[1927]:            |              drivers: option, rndis_host
Oct 11 01:31:03 IQ138000 python3[1927]:            |               plugin: simtech
Oct 11 01:31:03 IQ138000 python3[1927]:            |         primary port: ttyUSB1
Oct 11 01:31:03 IQ138000 python3[1927]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:31:03 IQ138000 python3[1927]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:31:03 IQ138000 python3[1927]:            |                state: enabling
Oct 11 01:31:03 IQ138000 python3[1927]:            |          power state: on
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:31:03 IQ138000 python3[1927]:            |              current: allowed: any; preferred: none
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   3GPP     |                 imei: 860803062234204
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:31:03 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:03 IQ138000 python3[1927]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:31:03 IQ138000 python3[1927]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:31:03 IQ138000 python3[1927]:            |                       slot 2: none
Oct 11 01:31:03 IQ138000 python3[1927]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:31:03 IQ138000 python3[1927]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:31:03 IQ138000 python3[1927]:  successfully requested primary SIM switch in modem
Oct 11 01:31:03 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 5 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:04 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:04 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:31:05 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:05 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:31:05 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:31:05 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:31:05 IQ138000 lsyncd[5422]: 01:31:05 Normal: --- Startup ---
Oct 11 01:31:05 IQ138000 lsyncd[5422]: 01:31:05 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:31:05 IQ138000 lsyncd[5422]: messages
Oct 11 01:31:05 IQ138000 lsyncd[5422]: journal
Oct 11 01:31:05 IQ138000 lsyncd[5422]: iq_network_manager/iq_network_manager.log
Oct 11 01:31:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:31:05 IQ138000 lsyncd[5424]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:31:05 IQ138000 lsyncd[5423]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:31:05 IQ138000 lsyncd[5423]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:31:05 IQ138000 lsyncd[5422]: 01:31:05 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:31:05 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:31:05 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:31:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 01:31:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] simple connect started...
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (6/10): register
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 01:31:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 01:31:07 IQ138000 NetworkManager[403]: <info>  [1760146267.5605] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:07 IQ138000 NetworkManager[403]: <info>  [1760146267.5618] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:31:07 IQ138000 NetworkManager[403]: <info>  [1760146267.5661] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 01:31:07 IQ138000 NetworkManager[403]: <info>  [1760146267.5690] ppp-manager: starting PPP connection
Oct 11 01:31:07 IQ138000 NetworkManager[403]: <info>  [1760146267.5850] ppp-manager: pppd started with pid 5444
Oct 11 01:31:07 IQ138000 pppd[5444]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:31:07 IQ138000 NetworkManager[5444]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: initializing
Oct 11 01:31:07 IQ138000 pppd[5444]: pppd 2.4.9 started by root, uid 0
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:31:07 IQ138000 NetworkManager[403]: <info>  [1760146267.6474] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 01:31:07 IQ138000 NetworkManager[5444]: Using interface ppp0
Oct 11 01:31:07 IQ138000 NetworkManager[5444]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:31:07 IQ138000 pppd[5444]: Using interface ppp0
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:31:07 IQ138000 pppd[5444]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:31:07 IQ138000 pppd[5444]: PAP authentication succeeded
Oct 11 01:31:07 IQ138000 pppd[5444]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:31:07 IQ138000 NetworkManager[5444]: PAP authentication succeeded
Oct 11 01:31:07 IQ138000 NetworkManager[5444]: kernel does not support PPP filtering
Oct 11 01:31:07 IQ138000 pppd[5444]: kernel does not support PPP filtering
Oct 11 01:31:07 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 01:31:07 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 01:31:07 IQ138000 ModemManager[481]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 01:31:08 IQ138000 pppd[5444]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:31:08 IQ138000 NetworkManager[5444]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:31:08 IQ138000 pppd[5444]: local  IP address 10.76.24.100
Oct 11 01:31:08 IQ138000 NetworkManager[5444]: local  IP address 10.76.24.100
Oct 11 01:31:08 IQ138000 NetworkManager[5444]: remote IP address 10.64.64.64
Oct 11 01:31:08 IQ138000 NetworkManager[5444]: primary   DNS address 172.23.10.130
Oct 11 01:31:08 IQ138000 NetworkManager[5444]: secondary DNS address 172.23.10.131
Oct 11 01:31:08 IQ138000 pppd[5444]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:31:08 IQ138000 pppd[5444]: remote IP address 10.64.64.64
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.1714] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:31:08 IQ138000 pppd[5444]: primary   DNS address 172.23.10.130
Oct 11 01:31:08 IQ138000 pppd[5444]: secondary DNS address 172.23.10.131
Oct 11 01:31:08 IQ138000 pppd[5444]: nm-ppp-plugin: ip-up event
Oct 11 01:31:08 IQ138000 pppd[5444]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.1810] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.1839] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.1868] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.1939] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:31:08 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:31:08 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.2709] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:08 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:31:08 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:31:08 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:31:08 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.3865] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.3880] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.3907] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.3933] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:31:08 IQ138000 NetworkManager[403]: <info>  [1760146268.3970] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:31:08 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:08 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:31:08 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:31:08 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:08 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 ntpd[1642]: Listen normally on 4 ppp0 10.76.24.100:123
Oct 11 01:31:09 IQ138000 ntpd[1642]: new interface(s) found: waking up resolver
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:09 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:10 IQ138000 ntpd[1642]: Soliciting pool server 46.160.198.122
Oct 11 01:31:10 IQ138000 vnstatd[1648]: Info: Interface "ppp0" enabled.
Oct 11 01:31:10 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:31:11 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 01:31:11 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:31:11 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:31:11 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:31:11 IQ138000 wb-mqtt-knx[1966]: INFO: knxd connected successfully
Oct 11 01:31:11 IQ138000 ntpd[1642]: Soliciting pool server 45.90.217.6
Oct 11 01:31:11 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 6 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:12 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:12 IQ138000 ntpd[1642]: Soliciting pool server 46.148.143.150
Oct 11 01:31:12 IQ138000 ntpd[1642]: Soliciting pool server 51.250.35.68
Oct 11 01:31:13 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:13 IQ138000 python3[1927]: Выполнение: mmcli -i any
Oct 11 01:31:13 IQ138000 python3[1927]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 01:31:13 IQ138000 python3[1927]:    -------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:31:13 IQ138000 python3[1927]:   -------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Properties |            active: yes
Oct 11 01:31:13 IQ138000 python3[1927]:              |              imsi: 250997340491874
Oct 11 01:31:13 IQ138000 python3[1927]:              |             iccid: 8970199210429593744
Oct 11 01:31:13 IQ138000 python3[1927]:              |       operator id: 25099
Oct 11 01:31:13 IQ138000 python3[1927]:              |     operator name: Beeline
Oct 11 01:31:13 IQ138000 python3[1927]: Выполнение: mmcli -m wbc
Oct 11 01:31:13 IQ138000 python3[1927]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:31:13 IQ138000 python3[1927]:    --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:31:13 IQ138000 python3[1927]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:31:13 IQ138000 python3[1927]:            |                model: A7602E-H
Oct 11 01:31:13 IQ138000 python3[1927]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:31:13 IQ138000 python3[1927]:            |            supported: gsm-umts
Oct 11 01:31:13 IQ138000 python3[1927]:            |              current: gsm-umts
Oct 11 01:31:13 IQ138000 python3[1927]:            |         equipment id: 860803062234204
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   System   |               device: wbc
Oct 11 01:31:13 IQ138000 python3[1927]:            |              drivers: option, rndis_host
Oct 11 01:31:13 IQ138000 python3[1927]:            |               plugin: simtech
Oct 11 01:31:13 IQ138000 python3[1927]:            |         primary port: ttyUSB1
Oct 11 01:31:13 IQ138000 python3[1927]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:31:13 IQ138000 python3[1927]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:31:13 IQ138000 python3[1927]:            |                state: connected
Oct 11 01:31:13 IQ138000 python3[1927]:            |          power state: on
Oct 11 01:31:13 IQ138000 python3[1927]:            |          access tech: lte
Oct 11 01:31:13 IQ138000 python3[1927]:            |       signal quality: 90% (recent)
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:31:13 IQ138000 python3[1927]:            |              current: allowed: any; preferred: none
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   3GPP     |                 imei: 860803062234204
Oct 11 01:31:13 IQ138000 python3[1927]:            |          operator id: 25099
Oct 11 01:31:13 IQ138000 python3[1927]:            |        operator name: beeline
Oct 11 01:31:13 IQ138000 python3[1927]:            |         registration: home
Oct 11 01:31:13 IQ138000 python3[1927]:            | packet service state: attached
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:31:13 IQ138000 python3[1927]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:31:13 IQ138000 python3[1927]:            |                       slot 2: none
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:31:13 IQ138000 python3[1927]: Current state: home
Oct 11 01:31:13 IQ138000 python3[1927]: SIM registered in the network.
Oct 11 01:31:13 IQ138000 python3[1927]: Выполнение: mmcli -m wbc
Oct 11 01:31:13 IQ138000 ntpd[1642]: Soliciting pool server 94.137.240.36
Oct 11 01:31:13 IQ138000 ntpd[1642]: Soliciting pool server 92.255.126.21
Oct 11 01:31:13 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:13 IQ138000 python3[1927]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:31:13 IQ138000 python3[1927]:    --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:31:13 IQ138000 python3[1927]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:31:13 IQ138000 python3[1927]:            |                model: A7602E-H
Oct 11 01:31:13 IQ138000 python3[1927]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:31:13 IQ138000 python3[1927]:            |            supported: gsm-umts
Oct 11 01:31:13 IQ138000 python3[1927]:            |              current: gsm-umts
Oct 11 01:31:13 IQ138000 python3[1927]:            |         equipment id: 860803062234204
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   System   |               device: wbc
Oct 11 01:31:13 IQ138000 python3[1927]:            |              drivers: option, rndis_host
Oct 11 01:31:13 IQ138000 python3[1927]:            |               plugin: simtech
Oct 11 01:31:13 IQ138000 python3[1927]:            |         primary port: ttyUSB1
Oct 11 01:31:13 IQ138000 python3[1927]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:31:13 IQ138000 python3[1927]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:31:13 IQ138000 python3[1927]:            |                state: connected
Oct 11 01:31:13 IQ138000 python3[1927]:            |          power state: on
Oct 11 01:31:13 IQ138000 python3[1927]:            |          access tech: lte
Oct 11 01:31:13 IQ138000 python3[1927]:            |       signal quality: 90% (recent)
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:31:13 IQ138000 python3[1927]:            |              current: allowed: any; preferred: none
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   3GPP     |                 imei: 860803062234204
Oct 11 01:31:13 IQ138000 python3[1927]:            |          operator id: 25099
Oct 11 01:31:13 IQ138000 python3[1927]:            |        operator name: beeline
Oct 11 01:31:13 IQ138000 python3[1927]:            |         registration: home
Oct 11 01:31:13 IQ138000 python3[1927]:            | packet service state: attached
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:31:13 IQ138000 python3[1927]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:31:13 IQ138000 python3[1927]:            |                       slot 2: none
Oct 11 01:31:13 IQ138000 python3[1927]:   --------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:31:13 IQ138000 python3[1927]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:31:13 IQ138000 ntpd[1642]: Soliciting pool server 51.250.110.169
Oct 11 01:31:13 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:13 IQ138000 python3[1927]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:31:13 IQ138000 python3[1927]:    -------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:31:13 IQ138000 python3[1927]:   -------------------------------
Oct 11 01:31:13 IQ138000 python3[1927]:   Properties |            active: yes
Oct 11 01:31:13 IQ138000 python3[1927]:              |              imsi: 250997340491874
Oct 11 01:31:13 IQ138000 python3[1927]:              |             iccid: 8970199210429593744
Oct 11 01:31:13 IQ138000 python3[1927]:              |       operator id: 25099
Oct 11 01:31:13 IQ138000 python3[1927]:              |     operator name: Beeline
Oct 11 01:31:13 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:13 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 ntpd[1642]: Soliciting pool server 91.206.16.3
Oct 11 01:31:14 IQ138000 ntpd[1642]: Soliciting pool server 85.142.100.8
Oct 11 01:31:14 IQ138000 ntpd[1642]: Soliciting pool server 178.252.117.188
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:14 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:15 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:15 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:15 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:15 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:15 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:31:15 IQ138000 ntpd[1642]: Soliciting pool server 192.36.143.130
Oct 11 01:31:15 IQ138000 ntpd[1642]: Soliciting pool server 195.90.182.235
Oct 11 01:31:15 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:16 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:16 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:31:16 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:16 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:16 IQ138000 ntpd[1642]: Soliciting pool server 162.159.200.1
Oct 11 01:31:17 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:17 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:31:17 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:17 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:17 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:17 IQ138000 ntpd[1642]: Soliciting pool server 45.141.102.99
Oct 11 01:31:17 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:31:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:31:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:31:18 IQ138000 ntpd[1642]: Soliciting pool server 93.95.100.85
Oct 11 01:31:18 IQ138000 wb-mqtt-serial[1665]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:31:18 IQ138000 python3[1927]: Выполнение: mmcli -m wbc
Oct 11 01:31:18 IQ138000 python3[1927]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:31:18 IQ138000 python3[1927]:    --------------------------------
Oct 11 01:31:18 IQ138000 python3[1927]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:31:18 IQ138000 python3[1927]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
-- Boot 0dc4870d04e24bdaac77aac553fe145f --
Oct 11 01:47:41 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 01:47:41 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 01:47:41 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 01:47:41 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 01:47:41 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 01:47:41 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 01:47:41 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 01:47:41 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 01:47:41 IQ138000 kernel: Zone ranges:
Oct 11 01:47:41 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 01:47:41 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 01:47:41 IQ138000 kernel: Movable zone start for each node
Oct 11 01:47:41 IQ138000 kernel: Early memory node ranges
Oct 11 01:47:41 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:47:41 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 01:47:41 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 01:47:41 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 01:47:41 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 01:47:41 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 01:47:41 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 01:47:41 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 01:47:41 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 01:47:41 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 01:47:41 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 01:47:41 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 01:47:41 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 01:47:41 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 01:47:41 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 01:47:41 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 01:47:41 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 01:47:41 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 01:47:41 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 01:47:41 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 01:47:41 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 01:47:41 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 01:47:41 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 01:47:41 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 01:47:41 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 01:47:41 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 01:47:41 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 01:47:41 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 01:47:41 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 01:47:41 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 01:47:41 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 01:47:41 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 01:47:41 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 01:47:41 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 01:47:41 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 01:47:41 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 01:47:41 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 01:47:41 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 01:47:41 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 01:47:41 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 01:47:41 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 01:47:41 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 01:47:41 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 01:47:41 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 01:47:41 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 01:47:41 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 01:47:41 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 01:47:41 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 01:47:41 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 01:47:41 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 01:47:41 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 01:47:41 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 01:47:41 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 01:47:41 IQ138000 kernel: devtmpfs: initialized
Oct 11 01:47:41 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 01:47:41 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 01:47:41 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 01:47:41 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 01:47:41 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 01:47:41 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 01:47:41 IQ138000 kernel: No ATAGs?
Oct 11 01:47:41 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 01:47:41 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 01:47:41 IQ138000 kernel: SCSI subsystem initialized
Oct 11 01:47:41 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 01:47:41 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 01:47:41 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 01:47:41 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 01:47:41 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 01:47:41 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 01:47:41 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 01:47:41 IQ138000 kernel: PTP clock support registered
Oct 11 01:47:41 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 01:47:41 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 01:47:41 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 01:47:41 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 01:47:41 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 01:47:41 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 01:47:41 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 01:47:41 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 01:47:41 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 01:47:41 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 01:47:41 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 01:47:41 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 01:47:41 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 01:47:41 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 01:47:41 IQ138000 kernel: Key type id_resolver registered
Oct 11 01:47:41 IQ138000 kernel: Key type id_legacy registered
Oct 11 01:47:41 IQ138000 kernel: Key type asymmetric registered
Oct 11 01:47:41 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 01:47:41 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 01:47:41 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 01:47:41 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 01:47:41 IQ138000 kernel: io scheduler kyber registered
Oct 11 01:47:41 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:47:41 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 01:47:41 IQ138000 kernel: brd: module loaded
Oct 11 01:47:41 IQ138000 kernel: loop: module loaded
Oct 11 01:47:41 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 01:47:41 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:47:41 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:47:41 IQ138000 kernel: CAN device driver interface
Oct 11 01:47:41 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 01:47:41 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 01:47:41 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 01:47:41 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 01:47:41 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 01:47:41 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 01:47:41 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 01:47:41 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 01:47:41 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 01:47:41 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 01:47:41 IQ138000 kernel: i2c /dev entries driver
Oct 11 01:47:41 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 01:47:41 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 01:47:41 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 01:47:41 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 01:47:41 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 01:47:41 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 01:47:41 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 01:47:41 IQ138000 kernel: Segment Routing with IPv6
Oct 11 01:47:41 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 01:47:41 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 01:47:41 IQ138000 kernel: can: controller area network core
Oct 11 01:47:41 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 01:47:41 IQ138000 kernel: can: raw protocol
Oct 11 01:47:41 IQ138000 kernel: can: broadcast manager protocol
Oct 11 01:47:41 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 01:47:41 IQ138000 kernel: can: SAE J1939
Oct 11 01:47:41 IQ138000 kernel: Key type dns_resolver registered
Oct 11 01:47:41 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 01:47:41 IQ138000 kernel: registered taskstats version 1
Oct 11 01:47:41 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 01:47:41 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 01:47:41 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 01:47:41 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:47:41 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 01:47:41 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 01:47:41 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 01:47:41 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 01:47:41 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T01:47:37 UTC (1760147257)
Oct 11 01:47:41 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 01:47:41 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:47:41 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 01:47:41 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 01:47:41 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 01:47:41 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 01:47:41 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 01:47:41 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 01:47:41 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 01:47:41 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 01:47:41 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 01:47:41 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 01:47:41 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 01:47:41 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 01:47:41 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: random: fast init done
Oct 11 01:47:41 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 01:47:41 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 01:47:41 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 01:47:41 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 01:47:41 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 01:47:41 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 01:47:41 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 01:47:41 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 01:47:41 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 01:47:41 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:47:41 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 01:47:41 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 01:47:41 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 01:47:41 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 01:47:41 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 01:47:41 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 01:47:41 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 01:47:41 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 01:47:41 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 01:47:41 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 01:47:41 IQ138000 kernel: libphy: stmmac: probed
Oct 11 01:47:41 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:47:41 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 01:47:41 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:47:41 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 01:47:41 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 01:47:41 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 01:47:41 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 01:47:41 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 01:47:41 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 01:47:41 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 01:47:41 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 01:47:41 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 01:47:41 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:47:41 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 01:47:41 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 01:47:41 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 01:47:41 IQ138000 kernel: of_cfs_init
Oct 11 01:47:41 IQ138000 kernel: of_cfs_init: OK
Oct 11 01:47:41 IQ138000 kernel: ALSA device list:
Oct 11 01:47:41 IQ138000 kernel:   No soundcards found.
Oct 11 01:47:41 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 01:47:41 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 01:47:41 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 01:47:41 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 01:47:41 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 01:47:41 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 01:47:41 IQ138000 kernel: devtmpfs: mounted
Oct 11 01:47:41 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 01:47:41 IQ138000 kernel: Run /sbin/init as init process
Oct 11 01:47:41 IQ138000 kernel:   with arguments:
Oct 11 01:47:41 IQ138000 kernel:     /sbin/init
Oct 11 01:47:41 IQ138000 kernel:   with environment:
Oct 11 01:47:41 IQ138000 kernel:     HOME=/
Oct 11 01:47:41 IQ138000 kernel:     TERM=linux
Oct 11 01:47:41 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 01:47:41 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 01:47:41 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 01:47:41 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 01:47:41 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 01:47:41 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:47:41 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 01:47:41 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:47:41 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 01:47:41 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 01:47:41 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 01:47:41 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 01:47:41 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 01:47:41 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 01:47:41 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 01:47:41 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:47:41 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 01:47:41 IQ138000 systemd[1]: Reached target Paths.
Oct 11 01:47:41 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 01:47:41 IQ138000 systemd[1]: Reached target Slices.
Oct 11 01:47:41 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 01:47:41 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 01:47:41 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 01:47:41 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 01:47:41 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 01:47:41 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 01:47:41 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 01:47:41 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:47:41 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 01:47:41 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 01:47:41 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 01:47:41 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 01:47:41 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 01:47:41 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:47:41 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 01:47:41 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 01:47:41 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 01:47:41 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 01:47:41 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 01:47:41 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 01:47:41 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 01:47:41 IQ138000 systemd-journald[140]: Journal started
Oct 11 01:47:41 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 01:47:41 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 01:47:41 IQ138000 systemd[1]: Started Journal Service.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 01:47:41 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 01:47:41 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 01:47:41 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 01:47:41 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 01:47:41 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 01:47:41 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 01:47:42 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:47:42 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:47:42 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 01:47:42 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 01:47:42 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 01:47:42 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 01:47:42 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 01:47:42 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 01:47:42 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 01:47:42 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 01:47:42 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 01:47:42 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 01:47:42 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 01:47:42 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 01:47:42 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 01:47:42 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 01:47:42 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 01:47:43 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 01:47:43 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 01:47:43 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 01:47:43 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 01:47:43 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 01:47:43 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 01:47:43 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 01:47:43 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 01:47:43 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 01:47:43 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 01:47:43 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 01:47:43 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 01:47:43 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 01:47:43 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 01:47:43 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 01:47:43 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 01:47:43 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 01:47:43 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 01:47:43 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 01:47:43 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 01:47:43 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 01:47:43 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 01:47:43 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 01:47:43 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 01:47:43 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 01:47:44 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 01:47:44 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 01:47:44 IQ138000 systemd[1]: Reached target Swap.
Oct 11 01:47:44 IQ138000 systemd-fsck[203]: data: recovering journal
Oct 11 01:47:44 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 01:47:44 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 01:47:44 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 01:47:44 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 01:47:44 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 01:47:44 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 01:47:44 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 01:47:44 IQ138000 systemd-fsck[203]: data: Clearing orphaned inode 128447 (uid=0, gid=101, mode=0100640, size=8388608)
Oct 11 01:47:44 IQ138000 systemd-fsck[203]: data: clean, 16446/328656 files, 372590/1313536 blocks
Oct 11 01:47:44 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 01:47:44 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 01:47:44 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 01:47:44 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 01:47:44 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 01:47:44 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 01:47:44 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 01:47:44 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 01:47:44 IQ138000 systemd-udevd[166]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:47:44 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:47:44 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 01:47:44 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:47:44 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 01:47:44 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 01:47:44 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 01:47:44 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 01:47:44 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 01:47:44 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 01:47:44 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 01:47:44 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 01:47:44 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 01:47:44 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 01:47:44 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 01:47:44 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.373ms for 463 entries.
Oct 11 01:47:44 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 502.4M, max 496.6M, 0B free.
Oct 11 01:47:44 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 01:47:44 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 01:47:44 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 01:47:45 IQ138000 kernel: random: crng init done
Oct 11 01:47:45 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 01:47:45 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 01:47:45 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 01:47:45 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 01:47:45 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 01:47:45 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 01:47:45 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 01:47:45 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 01:47:45 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 01:47:45 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 01:47:45 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 01:47:45 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 01:47:45 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 01:47:45 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 01:47:45 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 01:47:45 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 01:47:46 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 01:47:46 IQ138000 systemd[1]: Reached target Timers.
Oct 11 01:47:46 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 01:47:46 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 01:47:46 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 01:47:46 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 01:47:46 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 01:47:46 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 01:47:46 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:47:46 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 01:47:46 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 01:47:46 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 01:47:46 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 01:47:46 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 01:47:46 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 01:47:46 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 01:47:46 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:47:46 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 01:47:46 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 01:47:46 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 01:47:46 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 01:47:46 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 01:47:46 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 01:47:46 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 01:47:46 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 01:47:46 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 01:47:46 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:47:46 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 01:47:46 IQ138000 migrate.sh[320]: Error: No such file or directory
Oct 11 01:47:46 IQ138000 wb-watchdog[326]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:47:46 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:47:46 IQ138000 migrate.sh[332]: Error: No such file or directory
Oct 11 01:47:46 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 01:47:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:47:46 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 01:47:46 IQ138000 reverse-ssh.sh[347]: Error: No such file or directory
Oct 11 01:47:46 IQ138000 migrate.sh[352]: Error: No such file or directory
Oct 11 01:47:46 IQ138000 systemd[1]: Started watch config files.
Oct 11 01:47:46 IQ138000 rules-preprocessor[338]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 01:47:46 IQ138000 rules-preprocessor[338]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 01:47:46 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 01:47:46 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 01:47:46 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 01:47:46 IQ138000 migrate.sh[361]: Error: No such file or directory
Oct 11 01:47:47 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 01:47:47 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Successfully dropped root privileges.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: avahi-daemon 0.8 starting up.
Oct 11 01:47:47 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 01:47:47 IQ138000 migrate.sh[375]: Error: No such file or directory
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Successfully called chroot().
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Successfully dropped remaining capabilities.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: No service file found in /etc/avahi/services.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: New relevant interface lo.IPv6 for mDNS.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: New relevant interface lo.IPv4 for mDNS.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Network interface enumeration completed.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Registering new address record for ::1 on lo.*.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 01:47:47 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:47:47 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 01:47:47 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:47:47 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 01:47:47 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 01:47:47 IQ138000 systemd-logind[348]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 01:47:47 IQ138000 systemd-logind[348]: New seat seat0.
Oct 11 01:47:47 IQ138000 wpa_supplicant[381]: Successfully initialized wpa_supplicant
Oct 11 01:47:47 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 01:47:47 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 01:47:47 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:47 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 01:47:47 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 01:47:47 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 01:47:47 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:47 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:47:47 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 01:47:47 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 01:47:47 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 01:47:47 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 01:47:47 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:47 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:47:47 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 01:47:47 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 01:47:47 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 01:47:47 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:47:47 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:47:47 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 01:47:47 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 01:47:47 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 01:47:47 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 01:47:47 IQ138000 NetworkManager[404]: <info>  [1760147267.7837] NetworkManager (version 1.42.4) is starting... (boot:0dc4870d-04e2-4bda-ac77-aac553fe145f)
Oct 11 01:47:47 IQ138000 NetworkManager[404]: <info>  [1760147267.7842] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 01:47:47 IQ138000 NetworkManager[404]: <info>  [1760147267.8014] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 01:47:47 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 01:47:47 IQ138000 monit[321]: Starting daemon monitor: monit.
Oct 11 01:47:47 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 01:47:47 IQ138000 NetworkManager[404]: <info>  [1760147267.8507] manager[0x706900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 01:47:47 IQ138000 systemd[1]: Started User Login Management.
Oct 11 01:47:47 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 01:47:47 IQ138000 systemd[1]: Started Network Manager.
Oct 11 01:47:47 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 01:47:47 IQ138000 avahi-daemon[367]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3401932195.
Oct 11 01:47:48 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 01:47:48 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 01:47:48 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 01:47:48 IQ138000 ModemManager[472]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 01:47:48 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 01:47:48 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.4766] hostname: hostname: using hostnamed
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.4769] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.4808] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.4881] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.4902] manager[0x706900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.4905] manager[0x706900]: rfkill: WWAN hardware radio set enabled
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5196] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5277] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5317] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5582] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5617] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5640] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5646] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5651] manager: Networking is enabled by state file
Oct 11 01:47:48 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5706] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5709] settings: Loaded settings plugin: keyfile (internal)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5712] ifupdown: management mode: unmanaged
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5715] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.5717] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 01:47:48 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:47:48 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6338] dhcp: init: Using DHCP client 'internal'
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6361] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6465] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6509] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6570] device (lo): Activation: starting connection 'lo' (afb84bb3-73e7-430b-8b3b-cb75b2730a27)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6720] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 01:47:48 IQ138000 NetworkManager[404]: <info>  [1760147268.6743] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:47:48 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:47:48 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.0413] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.0438] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.0468] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.0501] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:47:49 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 01:47:49 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 01:47:49 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 01:47:49 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 01:47:49 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.2568] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.2618] device (wlan0): driver supports Access Point (AP) mode
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.2668] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 01:47:49 IQ138000 NetworkManager[404]: <info>  [1760147269.2694] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:47:49 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 01:47:50 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.1000] device (wlan1): driver supports Access Point (AP) mode
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.1060] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.1099] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.1639] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.1697] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.1763] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.2151] modem-manager: ModemManager available
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.2189] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.2331] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.2344] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.2387] device (lo): Activation: successful, device activated.
Oct 11 01:47:50 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5174] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5193] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5249] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5278] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5376] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5395] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5430] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5462] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5512] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5567] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5607] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 01:47:50 IQ138000 NetworkManager[404]: <info>  [1760147270.5666] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:47:51 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 01:47:51 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 01:47:51 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 01:47:54 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:47:54 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 01:47:54 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 01:47:54 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:54 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:47:54 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 01:47:54 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 01:47:54 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 01:47:54 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:54 IQ138000 init.sh[1319]: ...
Oct 11 01:47:54 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 01:47:54 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:55 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 01:47:55 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 01:47:55 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 01:47:55 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 01:47:55 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:55 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 01:47:55 IQ138000 init.sh[1319]: ...
Oct 11 01:47:55 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 01:47:55 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:55 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 01:47:56 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 01:47:56 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 01:47:56 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 01:47:56 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:56 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 01:47:56 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 01:47:56 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 01:47:56 IQ138000 init.sh[1319]: ...
Oct 11 01:47:56 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 01:47:56 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 01:47:56 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:47:56 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 01:47:56 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 01:47:57 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 01:47:57 IQ138000 systemd[1]: Reached target Network.
Oct 11 01:47:57 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 01:47:57 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 01:47:57 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:47:57 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:47:57 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 01:47:57 IQ138000 lsyncd[1613]: 01:47:57 Normal: --- Startup ---
Oct 11 01:47:57 IQ138000 lsyncd[1613]: 01:47:57 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:47:57 IQ138000 lsyncd[1613]: iq_network_manager/iq_network_manager.log
Oct 11 01:47:57 IQ138000 lsyncd[1613]: messages
Oct 11 01:47:57 IQ138000 knxd[1605]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:47:57 IQ138000 knxd[1605]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:47:57 IQ138000 lsyncd[1613]: journal
Oct 11 01:47:57 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 01:47:57 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:47:57 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 01:47:57 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 01:47:57 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 01:47:57 IQ138000 lsyncd[1625]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:47:57 IQ138000 lsyncd[1621]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:47:57 IQ138000 lsyncd[1621]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:47:57 IQ138000 lsyncd[1613]: 01:47:57 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:47:57 IQ138000 persist_meter_data.sh[1640]: Error: No such file or directory
Oct 11 01:47:57 IQ138000 ntpd[1622]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 01:47:57 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 01:47:57 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 01:47:57 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 01:47:57 IQ138000 ntpd[1622]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 01:47:57 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 01:47:57 IQ138000 ntpd[1622]: ntp-4 is maintained by Network Time Foundation,
Oct 11 01:47:57 IQ138000 ntpd[1622]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 01:47:57 IQ138000 ntpd[1622]: corporation.  Support and training for ntp-4 are
Oct 11 01:47:57 IQ138000 ntpd[1622]: available at https://www.nwtime.org/support
Oct 11 01:47:57 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 01:47:57 IQ138000 ntpd[1651]: proto: precision = 1.083 usec (-20)
Oct 11 01:47:57 IQ138000 ntpd[1651]: basedate set to 2020-09-11
Oct 11 01:47:57 IQ138000 ntpd[1651]: gps base set to 2020-09-13 (week 2123)
Oct 11 01:47:57 IQ138000 ntpd[1651]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 01:47:57 IQ138000 ntpd[1651]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 01:47:57 IQ138000 ntpd[1651]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 01:47:57 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 01:47:57 IQ138000 ntpd[1651]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 01:47:57 IQ138000 ntpd[1651]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 01:47:57 IQ138000 ntpd[1651]: Listen normally on 3 lo [::1]:123
Oct 11 01:47:57 IQ138000 ntpd[1651]: Listening on routing socket on fd #20 for interface updates
Oct 11 01:47:57 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 01:47:57 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 01:47:57 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 01:47:57 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:47:57 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:47:57 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 01:47:58 IQ138000 wb-mqtt-w1[1684]: MQTT broker localhost:1883
Oct 11 01:47:58 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:47:58 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:47:58 IQ138000 wb-mqtt-w1[1684]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 01:47:58 IQ138000 wb-mqtt-w1[1684]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 01:47:58 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:47:58 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:47:58 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 01:47:58 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 01:47:58 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 01:47:58 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 01:47:58 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 01:47:58 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:58 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:47:58 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:47:58 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:47:58 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 01:47:58 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:58 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 01:47:58 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 01:47:58 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 01:47:58 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 01:47:58 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 01:47:58 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 01:47:58 IQ138000 ntpd[1651]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:47:58 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 01:47:58 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 01:47:58 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 01:47:58 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 01:47:58 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 01:47:58 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 01:47:58 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 01:47:58 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:47:58 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 01:47:58 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 01:47:58 IQ138000 vnstatd[1658]: Info: vnStat daemon 2.6 started. (pid:1658 uid:110 gid:117 64-bit)
Oct 11 01:47:58 IQ138000 vnstatd[1658]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 01:47:58 IQ138000 vnstatd[1658]: Info: Interface "ppp0" disabled.
Oct 11 01:47:58 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:47:58 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 01:47:58 IQ138000 sshd[1759]: Server listening on 0.0.0.0 port 22.
Oct 11 01:47:58 IQ138000 sshd[1759]: Server listening on :: port 22.
Oct 11 01:47:58 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 01:47:58 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 01:47:59 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:47:59 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:47:59 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 01:47:59 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 01:47:59 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:47:59 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:47:59 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 01:47:59 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 01:47:59 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 01:47:59 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 01:47:59 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:47:59 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:47:59 IQ138000 reverse-ssh.sh[1861]: Error: No such file or directory
Oct 11 01:47:59 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:47:59 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:59 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 01:47:59 IQ138000 wpa_supplicant[381]: wlan0: Reject scan trigger since one is already pending
Oct 11 01:47:59 IQ138000 knxd[1872]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:47:59 IQ138000 knxd[1872]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:47:59 IQ138000 ntpd[1651]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:47:59 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:47:59 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:47:59 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:47:59 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 01:47:59 IQ138000 NetworkManager[404]: <error> [1760147279.8832] audit: failed to open auditd socket: Protocol not supported
Oct 11 01:47:59 IQ138000 NetworkManager[404]: <info>  [1760147279.8835] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:47:59 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:47:59 IQ138000 wb-adjust-systime[1849]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Warning: Error resolving bridge address: Name or service not known.
Oct 11 01:47:59 IQ138000 mosquitto[1912]: 1760147279: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 01:48:00 IQ138000 mosquitto[1912]: 1760147279: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 01:48:00 IQ138000 wb-adjust-systime[1849]: Drift file is valid (was recently edited)
Oct 11 01:48:00 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 01:48:00 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 01:48:00 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 01:48:00 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 01:48:00 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4214] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4220] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4228] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4249] manager: NetworkManager state is now CONNECTING
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4394] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:00 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4516] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4518] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4802] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4853] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4886] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4895] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4896] Config: added 'scan_ssid' value '1'
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4898] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4899] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.4900] Config: added 'psk' value '<hidden>'
Oct 11 01:48:00 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 01:48:00 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 01:48:00 IQ138000 ntpd[1651]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:48:00 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 01:48:00 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: MQTT broker localhost:1883
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: Config file /etc/wb-mqtt-db.conf
Oct 11 01:48:00 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] Creating tables if necessary
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] Create indices if necessary
Oct 11 01:48:00 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] Analyzing data table
Oct 11 01:48:00 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 01:48:00 IQ138000 systemd[1]: Started metrics sender.
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.9273] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:48:00 IQ138000 NetworkManager[404]: <info>  [1760147280.9276] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:48:00 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 01:48:01 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 01:48:01 IQ138000 wb-mqtt-knx[2015]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:01 IQ138000 wb-mqtt-knx[2015]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:01 IQ138000 wb-mqtt-logs[2019]: MQTT broker localhost:1883
Oct 11 01:48:01 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:01 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:01 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [gpio driver] Started
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:48:01 IQ138000 wb-mqtt-gpio[1791]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:48:01 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:48:01 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.658s CPU time.
Oct 11 01:48:01 IQ138000 ntpd[1651]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 01:48:01 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 01:48:01 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:02 IQ138000 wb-mqtt-confed[1994]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:48:02 IQ138000 wb-mqtt-confed[1994]: INFO: [wbgo_mqtt] confed-IQ138000-1994: MQTT connection established
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2040]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 01:48:02 IQ138000 wb-mqtt-iec104[2005]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 01:48:02 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 01:48:02 IQ138000 wb-mqtt-opcua[2216]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 01:48:02 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 01:48:02 IQ138000 wb-mqtt-mbgate[2023]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 01:48:02 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 01:48:02 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:03 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:03 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:03 IQ138000 wb-mqtt-logs[2019]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:48:03 IQ138000 wb-mqtt-iec104[2229]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 01:48:03 IQ138000 wb-mqtt-opcua[2216]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 01:48:03 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 01:48:03 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 01:48:03 IQ138000 wb-mqtt-iec104[2229]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 01:48:03 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:03 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 01:48:03 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 01:48:03 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 01:48:03 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 01:48:03 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 01:48:04 IQ138000 wb-mqtt-knx[2015]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:04 IQ138000 wb-mqtt-knx[2015]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:04 IQ138000 wb-mqtt-knx[2015]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:04 IQ138000 wb-mqtt-knx[2015]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:48:04 IQ138000 wb-mqtt-knx[2015]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 01:48:05 IQ138000 python3[1970]: No data file found at /tmp/network_status_cache.json
Oct 11 01:48:05 IQ138000 python3[1970]: Connecting to MQTT
Oct 11 01:48:05 IQ138000 python3[1970]: Connected to MQTT
Oct 11 01:48:05 IQ138000 python3[1970]: Connection returned result: Connection Accepted.
Oct 11 01:48:05 IQ138000 NetworkManager[404]: <info>  [1760147285.5043] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:48:05 IQ138000 NetworkManager[404]: <info>  [1760147285.5192] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:48:07 IQ138000 wb-device-manager[1978]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 01:48:07 IQ138000 wb-device-manager[1978]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 01:48:07 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2032 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 01:48:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:48:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 01:48:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:48:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New virtual device lo afb84bb3-73e7-430b-8b3b-cb75b2730a27 /org/freedesktop/NetworkManager/Settings/7
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:48:08 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:08 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection lo afb84bb3-73e7-430b-8b3b-cb75b2730a27 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 01:48:09 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 01:48:09 IQ138000 kernel: dc5ldo: disabling
Oct 11 01:48:09 IQ138000 kernel: dldo4: disabling
Oct 11 01:48:09 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 01:48:09 IQ138000 kernel: vcc-sd: disabling
Oct 11 01:48:09 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:48:09 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 01:48:09 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 01:48:09 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 01:48:09 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: MQTT broker localhost:1883
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 01:48:09 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 11
Oct 11 01:48:09 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 11
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 1
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 1
Oct 11 01:48:09 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] ADC worker thread is started
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:48:09 IQ138000 wb-mqtt-adc[3092]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:48:10 IQ138000 knxd[3122]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:48:10 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:48:10 IQ138000 knxd[3122]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:48:10 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:48:10 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:48:10 IQ138000 wb-mqtt-confed[1994]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 01:48:11 IQ138000 wb-mqtt-db[1997]: INFO: [sqlite] DB initialization is done
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 01:48:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 01:48:12 IQ138000 wb-gsm[3332]: main: Called from pid 1 (systemd)
Oct 11 01:48:12 IQ138000 wb-usb-otg-start.sh[3379]: : wb-usb-otg-start
Oct 11 01:48:12 IQ138000 wb-usb-otg-start.sh[3379]: main: setup_device()
Oct 11 01:48:12 IQ138000 wb-gsm[3377]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:48:12 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 01:48:12 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 01:48:12 IQ138000 kernel: using random self ethernet address
Oct 11 01:48:12 IQ138000 kernel: using random host ethernet address
Oct 11 01:48:12 IQ138000 wb-usb-otg-start.sh[3379]: main: enabling profile rndis
Oct 11 01:48:12 IQ138000 wb-gsm[3437]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:48:12 IQ138000 systemd-udevd[3395]: Using default interface naming scheme 'v247'.
Oct 11 01:48:12 IQ138000 NetworkManager[404]: <info>  [1760147292.9552] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 01:48:12 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 01:48:12 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 01:48:12 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 01:48:12 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 01:48:13 IQ138000 NetworkManager[404]: <info>  [1760147293.2326] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:48:13 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 01:48:13 IQ138000 wb-gsm[3507]: should_enable: Should enable GSM modem
Oct 11 01:48:13 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 01:48:13 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 01:48:14 IQ138000 NetworkManager[404]: <info>  [1760147294.2157] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:48:14 IQ138000 NetworkManager[404]: <info>  [1760147294.2160] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 01:48:14 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 01:48:14 IQ138000 wb-gsm[3578]: main: Called from pid 3508 (wb-gsm-mm)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 01:48:14 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 01:48:14 IQ138000 wb-gsm[3589]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 01:48:15 IQ138000 python3[1970]: Выполнение: service wb-connection-manager stop
Oct 11 01:48:15 IQ138000 wb-gsm[3616]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 01:48:15 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 01:48:15 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: DB logger started, go to main loop
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 01:48:16 IQ138000 npm[1687]: > zigbee2mqtt@2.1.1 start
Oct 11 01:48:16 IQ138000 npm[1687]: > node index.js
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 01:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:48:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 01:48:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 01:48:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:19 IQ138000 npm[3714]: Starting Zigbee2MQTT without watchdog.
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 01:48:19 IQ138000 wb-gsm[4001]: mm_off: Modem is already OFF
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:48:20 IQ138000 wb-gsm[4070]: main: Called from pid 3508 (wb-gsm-mm)
Oct 11 01:48:20 IQ138000 wb-gsm[4082]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 01:48:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:20 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 01:48:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4668 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:48:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 01:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 01:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 01:48:22 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 01:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:23 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 01:48:23 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:48:23 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:23 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:23 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:23 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 01:48:23 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:48:23 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 01:48:23 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:23 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:48:23 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:48:23 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: MQTT broker localhost:1883
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 01:48:23 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 01:48:23 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 01:48:23 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: w1 thread Started
Oct 11 01:48:23 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 01:48:23 IQ138000 wb-mqtt-w1[4451]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 01:48:23 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:48:23 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:48:23 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:48:23 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.171s CPU time.
Oct 11 01:48:23 IQ138000 python3[1970]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 01:48:23 IQ138000 python3[1970]:  
Oct 11 01:48:23 IQ138000 knxd[4443]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:48:23 IQ138000 knxd[4443]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:48:23 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:48:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 01:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:48:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:48:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <warn>  [1760147305.5310] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <info>  [1760147305.5312] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <info>  [1760147305.5333] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <warn>  [1760147305.5355] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <info>  [1760147305.5544] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:25 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:48:25 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <info>  [1760147305.5852] manager: startup complete
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <info>  [1760147305.5867] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:48:25 IQ138000 NetworkManager[404]: <info>  [1760147305.5869] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:48:25 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 01:48:25 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 01:48:25 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 01:48:25 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 01:48:26 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:48:26 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 01:48:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:48:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:48:27 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 01:48:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:48:27 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 01:48:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:48:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 01:48:28 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:28 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 01:48:28 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 01:48:28 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 01:48:28 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 01:48:28 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:48:28 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 01:48:28 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 01:48:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:48:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 01:48:28 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 01:48:28 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 01:48:28 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:48:28 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:48:29 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 01:48:29 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:48:29 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 01:48:29 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:48:29 IQ138000 systemd[1]: Started User command handler service.
Oct 11 01:48:29 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 01:48:29 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 01:48:29 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:29 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 01:48:29 IQ138000 watchdog[4633]: starting daemon (5.16):
Oct 11 01:48:29 IQ138000 watchdog[4633]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 01:48:29 IQ138000 watchdog[4633]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 01:48:29 IQ138000 watchdog[4633]:  ping: no machine to check
Oct 11 01:48:29 IQ138000 watchdog[4633]:  file: no file to check
Oct 11 01:48:29 IQ138000 watchdog[4633]:  pidfile: /var/run/sshd.pid
Oct 11 01:48:29 IQ138000 watchdog[4633]:  interface: no interface to check
Oct 11 01:48:29 IQ138000 watchdog[4633]:  temperature: no sensors to check
Oct 11 01:48:29 IQ138000 watchdog[4633]:  no test binary files
Oct 11 01:48:29 IQ138000 watchdog[4633]:  no repair binary files
Oct 11 01:48:29 IQ138000 watchdog[4633]:  error retry time-out = 30 seconds
Oct 11 01:48:29 IQ138000 watchdog[4633]:  repair attempts = 1
Oct 11 01:48:29 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 01:48:29 IQ138000 watchdog[4633]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 01:48:29 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 01:48:29 IQ138000 watchdog[4633]: watchdog now set to 120 seconds
Oct 11 01:48:29 IQ138000 watchdog[4633]: hardware watchdog identity: WBEC WDT
Oct 11 01:48:29 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 01:48:29 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 01:48:29 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 01:48:29 IQ138000 systemd[1]: Startup finished in 3.782s (kernel) + 50.002s (userspace) = 53.784s.
Oct 11 01:48:29 IQ138000 wb-rules[4610]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:48:29 IQ138000 wb-rules[4610]: INFO: driver is created
Oct 11 01:48:29 IQ138000 wb-rules[4610]: INFO: [wbgo_mqtt] rules-IQ138000-4610: MQTT connection established
Oct 11 01:48:29 IQ138000 wb-rules[4610]: INFO: driver loop is started
Oct 11 01:48:29 IQ138000 wb-rules[4610]: INFO: wait for driver to become ready
Oct 11 01:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:48:30 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:31 IQ138000 wb-rules[4610]: INFO: driver is ready
Oct 11 01:48:31 IQ138000 wb-rules[4610]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:48:31 IQ138000 wb-rules[4610]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4610: MQTT connection established
Oct 11 01:48:31 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:31 IQ138000 wb-rules[4610]: INFO: [engine] Starting main loop
Oct 11 01:48:31 IQ138000 wb-rules[4610]: INFO: the engine is ready
Oct 11 01:48:31 IQ138000 wb-rules[4610]: INFO: [engine] Starting sync loop
Oct 11 01:48:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:32 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:32 IQ138000 wb-rules[4610]: WARNING: [rule warning] DAC: no config file
Oct 11 01:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:32 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:33 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:33 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 01:48:33 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 01:48:33 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 01:48:33 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 76:9b:7c:d7:ad:00
Oct 11 01:48:33 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 01:48:33 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 01:48:33 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 01:48:33 IQ138000 NetworkManager[404]: <info>  [1760147313.6940] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 01:48:33 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:33 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 01:48:33 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 01:48:33 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 01:48:33 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 01:48:33 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 01:48:33 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 01:48:33 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 01:48:33 IQ138000 systemd-udevd[4861]: Using default interface naming scheme 'v247'.
Oct 11 01:48:33 IQ138000 systemd-udevd[4861]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:34 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 01:48:34 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:48:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:48:34 IQ138000 knxd[4999]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:48:34 IQ138000 knxd[4999]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:48:34 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:48:34 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:48:34 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:34 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:48:34 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:48:34 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:34 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 python3[1970]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:35 IQ138000 wb-rules[4610]: INFO: all rule files are loaded
Oct 11 01:48:35 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:48:36 IQ138000 wb-gsm[5035]: mm_on: Waiting for modem to start
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 01:48:37 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:39 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 01:48:39 IQ138000 npm[3714]: [2025-10-11 01:48:39] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 01:48:39 IQ138000 npm[3714]: [2025-10-11 01:48:39] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 01:48:39 IQ138000 npm[3714]: [2025-10-11 01:48:39] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 01:48:39 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:48:40 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:40 IQ138000 npm[3714]: [2025-10-11 01:48:40] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 01:48:40 IQ138000 npm[3714]: [2025-10-11 01:48:40] info:         zh:zstack:znp: Serialport opened
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:41 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:48:41 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:48:41 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:48:42 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:42 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:48:42.908+00:00
Oct 11 01:48:42 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:48:42 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:48:42.908Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:42 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147502923,"cmd_timestamp_ms":1760147322923,"source":"schedule"}
Oct 11 01:48:42 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147502923,"cmd_timestamp_ms":1760147322923,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:48:43.133+00:00
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:48:43.133Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147503148,"cmd_timestamp_ms":1760147323148,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147503148,"cmd_timestamp_ms":1760147323148,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: Currently 4 devices are joined.
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:48:43.280+00:00
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:48:43.280Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503298,"cmd_timestamp_ms":1760147323298,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503298,"cmd_timestamp_ms":1760147323298,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:48:43.413+00:00
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:48:43.413Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503434,"cmd_timestamp_ms":1760147323434,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503434,"cmd_timestamp_ms":1760147323434,"source":"schedule"}
Oct 11 01:48:43 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:48:43.559+00:00
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:48:43.559Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503576,"cmd_timestamp_ms":1760147323576,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503576,"cmd_timestamp_ms":1760147323576,"source":"schedule"}
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m: Connected to MQTT server
Oct 11 01:48:43 IQ138000 npm[3714]: [2025-10-11 01:48:43] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:48:43.815+00:00
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:48:43.815Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503844,"cmd_timestamp_ms":1760147323844,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147503844,"cmd_timestamp_ms":1760147323844,"source":"schedule"}
Oct 11 01:48:43 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:48:44.060+00:00
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:48:44.060Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147504086,"cmd_timestamp_ms":1760147324086,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147504086,"cmd_timestamp_ms":1760147324086,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:48:44 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:48:44 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:48:44 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:48:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:48:44.252+00:00
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:48:44 IQ138000 npm[3714]: [2025-10-11 01:48:44] info:         z2m: Started frontend on port 8282
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:48:44.252Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147504275,"cmd_timestamp_ms":1760147324275,"source":"schedule"}
Oct 11 01:48:44 IQ138000 npm[3714]: [2025-10-11 01:48:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.92,"last_seen":1760140334922,"power_outage_count":35250,"temperature":23.25,"voltage":3085}'
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147504275,"cmd_timestamp_ms":1760147324275,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:48:44 IQ138000 npm[3714]: [2025-10-11 01:48:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.44,"last_seen":1760142692373,"power_outage_count":48745,"temperature":25.09,"voltage":3025}'
Oct 11 01:48:44 IQ138000 npm[3714]: [2025-10-11 01:48:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 01:48:44 IQ138000 npm[3714]: [2025-10-11 01:48:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760139704719,"power_outage_count":25795,"pressure":992.7,"temperature":21.56,"voltage":3005}'
Oct 11 01:48:44 IQ138000 npm[3714]: [2025-10-11 01:48:44] info:         z2m: Zigbee2MQTT started!
Oct 11 01:48:44 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 01:48:44 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:48:44 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:48:44 IQ138000 knxd[5181]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:48:44 IQ138000 knxd[5181]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:48:44 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:48:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:44 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:48:44 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:48:44 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:48:44.670+00:00
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:48:44.670Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147504683,"cmd_timestamp_ms":1760147324683,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147504683,"cmd_timestamp_ms":1760147324683,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:48:44.774+00:00
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:48:44.774Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147504786,"cmd_timestamp_ms":1760147324786,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147504786,"cmd_timestamp_ms":1760147324786,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:48:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:48:44.954+00:00
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:48:44.954Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147504969,"cmd_timestamp_ms":1760147324969,"source":"schedule"}
Oct 11 01:48:44 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147504969,"cmd_timestamp_ms":1760147324969,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:48:45.115+00:00
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:48:45.115Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147505124,"cmd_timestamp_ms":1760147325124,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147505124,"cmd_timestamp_ms":1760147325124,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:48:45.333+00:00
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:48:45.333Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147505344,"cmd_timestamp_ms":1760147325344,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147505344,"cmd_timestamp_ms":1760147325344,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:48:45.566+00:00
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:48:45.566Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147505581,"cmd_timestamp_ms":1760147325581,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147505581,"cmd_timestamp_ms":1760147325581,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:48:45 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:48:45.806+00:00
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:48:45.806Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147505815,"cmd_timestamp_ms":1760147325815,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147505815,"cmd_timestamp_ms":1760147325815,"source":"schedule"}
Oct 11 01:48:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:45 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-watchdog[5263]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:48:46 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:47 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 01:48:47 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 01:48:47 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:48:48 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:49 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:50 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:52 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:53 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:53 IQ138000 ModemManager[472]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:48:53 IQ138000 ModemManager[472]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 01:48:54 IQ138000 ModemManager[472]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:48:54 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:54 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:48:54 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 01:48:54 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:48:54 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:48:54 IQ138000 knxd[5385]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 01:48:54 IQ138000 knxd[5385]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 01:48:54 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:48:54 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 01:48:54 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 01:48:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:48:54 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:48:55 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:48:55 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 01:48:55 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:48:55 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 01:48:55 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 01:48:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:55 IQ138000 ModemManager[472]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7660] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7684] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7712] device (ttyUSB1): modem state 'enabling'
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7747] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7772] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7816] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7823] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:48:55 IQ138000 NetworkManager[404]: <info>  [1760147335.7846] manager: NetworkManager state is now CONNECTING
Oct 11 01:48:55 IQ138000 ModemManager[472]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 01:48:55 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:48:55 IQ138000 ModemManager[472]: <info>  [modem0] power state updated: on
Oct 11 01:48:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:56 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:48:56 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:48:56 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:48:56 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:48:56 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:48:56 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:48:56 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:48:56 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:48:56 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:48:56 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:48:56 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:48:56 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:48:56 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:48:56 IQ138000 python3[1970]:            |                state: enabling
Oct 11 01:48:56 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:48:56 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:48:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:48:56 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:48:56 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:48:56 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:48:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:48:56 IQ138000 python3[1970]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:48:56 IQ138000 python3[1970]:  successfully requested primary SIM switch in modem
Oct 11 01:48:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:48:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:48:57 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:48:58 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:48:58 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 01:48:58 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:48:58 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:48:58 IQ138000 lsyncd[5432]: 01:48:58 Normal: --- Startup ---
Oct 11 01:48:58 IQ138000 lsyncd[5432]: 01:48:58 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:48:58 IQ138000 lsyncd[5432]: messages
Oct 11 01:48:58 IQ138000 lsyncd[5432]: journal
Oct 11 01:48:58 IQ138000 lsyncd[5432]: iq_network_manager/iq_network_manager.log
Oct 11 01:48:58 IQ138000 lsyncd[5435]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 01:48:58 IQ138000 lsyncd[5434]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 01:48:58 IQ138000 lsyncd[5434]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 01:48:58 IQ138000 lsyncd[5432]: 01:48:58 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 01:48:58 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 01:48:58 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 01:48:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:48:59 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:48:59 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:48:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:48:59 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 01:48:59 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 01:48:59 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 01:48:59 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 01:48:59 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] simple connect started...
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (6/10): register
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 01:49:00 IQ138000 NetworkManager[404]: <info>  [1760147340.3293] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:49:00 IQ138000 NetworkManager[404]: <info>  [1760147340.3305] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:49:00 IQ138000 NetworkManager[404]: <info>  [1760147340.3346] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 01:49:00 IQ138000 NetworkManager[404]: <info>  [1760147340.3367] ppp-manager: starting PPP connection
Oct 11 01:49:00 IQ138000 NetworkManager[404]: <info>  [1760147340.3560] ppp-manager: pppd started with pid 5454
Oct 11 01:49:00 IQ138000 pppd[5454]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:49:00 IQ138000 NetworkManager[5454]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: initializing
Oct 11 01:49:00 IQ138000 pppd[5454]: pppd 2.4.9 started by root, uid 0
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:49:00 IQ138000 pppd[5454]: Using interface ppp0
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:49:00 IQ138000 NetworkManager[5454]: Using interface ppp0
Oct 11 01:49:00 IQ138000 NetworkManager[5454]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:49:00 IQ138000 pppd[5454]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:49:00 IQ138000 NetworkManager[404]: <info>  [1760147340.4219] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:49:00 IQ138000 pppd[5454]: PAP authentication succeeded
Oct 11 01:49:00 IQ138000 pppd[5454]: kernel does not support PPP filtering
Oct 11 01:49:00 IQ138000 pppd[5454]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:49:00 IQ138000 NetworkManager[5454]: PAP authentication succeeded
Oct 11 01:49:00 IQ138000 NetworkManager[5454]: kernel does not support PPP filtering
Oct 11 01:49:00 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 01:49:00 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 01:49:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:00 IQ138000 ModemManager[472]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 01:49:01 IQ138000 vnstatd[1658]: Info: Interface "ppp0" enabled.
Oct 11 01:49:01 IQ138000 pppd[5454]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:49:01 IQ138000 NetworkManager[5454]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:49:01 IQ138000 pppd[5454]: local  IP address 10.200.189.117
Oct 11 01:49:01 IQ138000 NetworkManager[5454]: local  IP address 10.200.189.117
Oct 11 01:49:01 IQ138000 NetworkManager[5454]: remote IP address 10.64.64.64
Oct 11 01:49:01 IQ138000 NetworkManager[5454]: primary   DNS address 172.23.10.131
Oct 11 01:49:01 IQ138000 NetworkManager[5454]: secondary DNS address 172.23.10.130
Oct 11 01:49:01 IQ138000 pppd[5454]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:49:01 IQ138000 pppd[5454]: remote IP address 10.64.64.64
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.0592] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:49:01 IQ138000 pppd[5454]: primary   DNS address 172.23.10.131
Oct 11 01:49:01 IQ138000 pppd[5454]: secondary DNS address 172.23.10.130
Oct 11 01:49:01 IQ138000 pppd[5454]: nm-ppp-plugin: ip-up event
Oct 11 01:49:01 IQ138000 pppd[5454]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.0688] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.0744] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.0769] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.0819] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:49:01 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:49:01 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.1257] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:49:01 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:49:01 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:49:01 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:49:01 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.2381] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.2398] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.2428] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.2464] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:49:01 IQ138000 NetworkManager[404]: <info>  [1760147341.2495] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:02 IQ138000 ntpd[1651]: Listen normally on 4 ppp0 10.200.189.117:123
Oct 11 01:49:02 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 01:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:49:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:49:04 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 01:49:04 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 01:49:04 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 01:49:04 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 01:49:04 IQ138000 wb-mqtt-knx[2015]: INFO: knxd connected successfully
Oct 11 01:49:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:06 IQ138000 python3[1970]: Выполнение: mmcli -i any
Oct 11 01:49:06 IQ138000 python3[1970]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 01:49:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:06 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:06 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:06 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:06 IQ138000 python3[1970]: Current state: home
Oct 11 01:49:06 IQ138000 python3[1970]: SIM registered in the network.
Oct 11 01:49:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:06 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:06 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:06 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:09 IQ138000 ntpd[1651]: Soliciting pool server 46.138.254.88
Oct 11 01:49:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:10 IQ138000 ntpd[1651]: Soliciting pool server 85.193.65.152
Oct 11 01:49:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 31 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:11 IQ138000 ntpd[1651]: Soliciting pool server 85.142.100.8
Oct 11 01:49:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:49:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:11 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:49:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:12 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:12 IQ138000 ntpd[1651]: Soliciting pool server 94.241.142.113
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:49:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:14 IQ138000 ntpd[1651]: Soliciting pool server 92.255.126.4
Oct 11 01:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:15 IQ138000 ntpd[1651]: Soliciting pool server 151.0.2.54
Oct 11 01:49:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:16 IQ138000 ntpd[1651]: Soliciting pool server 217.28.222.15
Oct 11 01:49:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:17 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:17 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:17 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:17 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:17 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:17 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:17 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:17 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:17 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:17 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:17 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:17 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:17 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:17 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:17 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:17 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:17 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:17 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:17 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:17 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:17 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:17 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:17 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:17 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:17 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:17 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:17 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:17 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:17 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:17 IQ138000 ntpd[1651]: Soliciting pool server 185.209.85.222
Oct 11 01:49:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:18 IQ138000 ntpd[1651]: Soliciting pool server 2a00:18c0:1:1::5
Oct 11 01:49:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 31 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:19 IQ138000 ntpd[1651]: Soliciting pool server 89.109.251.22
Oct 11 01:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:49:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:22 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:22 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:22 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:22 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:22 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:22 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:22 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:22 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:22 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:22 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:22 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:22 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:22 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:24 IQ138000 ntpd[1651]: Soliciting pool server 51.250.35.68
Oct 11 01:49:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:27 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:27 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:27 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:27 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:27 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:27 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:27 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:27 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:27 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:27 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:27 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:27 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:27 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:27 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:27 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:27 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:27 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:27 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:27 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:27 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:27 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:27 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:27 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:27 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:27 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:27 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:27 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:27 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:27 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:27 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:27 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:27 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:27 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:32 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:32 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:32 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:32 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:32 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:32 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:32 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:32 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:32 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:32 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:32 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:32 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:32 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:32 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:32 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:32 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:32 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:32 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:32 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:32 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:32 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:32 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:32 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:32 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:32 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L1, row count 7183, limit 7042
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:49:35 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:49:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 01:49:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 01:49:37 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 01:49:37 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 01:49:37 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 01:49:37 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:37 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:37 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:37 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:37 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:43 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:43 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:43 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:43 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:43 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:43 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:43 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:43 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:43 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:43 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:43 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:43 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:43 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:43 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:43 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:43 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:43 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:43 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:43 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:43 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:43 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:43 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:43 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:43 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:43 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:49:46 IQ138000 wb-watchdog[6054]: [INFO] Interval #3 started. Waiting up to 60 seconds for error...
Oct 11 01:49:48 IQ138000 wb-rules[4610]: INFO: [engine] Stopping sync loop
Oct 11 01:49:48 IQ138000 wb-rules[4610]: INFO: [engine] Stop main loop
Oct 11 01:49:48 IQ138000 systemd[1]: Stopping MQTT Rule engine for Wiren Board...
Oct 11 01:49:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:48 IQ138000 systemd[1]: wb-rules.service: Succeeded.
Oct 11 01:49:48 IQ138000 systemd[1]: Stopped MQTT Rule engine for Wiren Board.
Oct 11 01:49:48 IQ138000 systemd[1]: wb-rules.service: Consumed 25.596s CPU time.
Oct 11 01:49:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:48 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:48 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:48 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 01:49:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:48 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:48 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:48 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:48 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:48 IQ138000 systemd[1]: Stopping Data collection and transformation service...
Oct 11 01:49:48 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 01:49:48 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 11 01:49:48 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 11 01:49:48 IQ138000 wb-rules[6073]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 01:49:48 IQ138000 wb-rules[6073]: INFO: driver is created
Oct 11 01:49:48 IQ138000 wb-rules[6073]: INFO: [wbgo_mqtt] rules-IQ138000-6073: MQTT connection established
Oct 11 01:49:48 IQ138000 wb-rules[6073]: INFO: driver loop is started
Oct 11 01:49:48 IQ138000 wb-rules[6073]: INFO: wait for driver to become ready
Oct 11 01:49:48 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 01:49:48 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 01:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-rules[6073]: INFO: driver is ready
Oct 11 01:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:49 IQ138000 wb-rules[6073]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 01:49:49 IQ138000 wb-rules[6073]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-6073: MQTT connection established
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-rules[6073]: INFO: [engine] Starting main loop
Oct 11 01:49:50 IQ138000 wb-rules[6073]: INFO: the engine is ready
Oct 11 01:49:50 IQ138000 wb-rules[6073]: INFO: [engine] Starting sync loop
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:50 IQ138000 wb-rules[6073]: WARNING: [rule warning] DAC: no config file
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:49:51 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 01:49:51 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:49:51 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 01:49:52 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:53 IQ138000 wb-rules[6073]: INFO: all rule files are loaded
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:49:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:53 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:53 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:53 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:53 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:53 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:53 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:53 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:53 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:53 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:53 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:53 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:53 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:53 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:53 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:53 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:53 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:53 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 01:49:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 01:49:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:49:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:49:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:49:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:49:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:49:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 01:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 do-upgrade.sh[2017]: 1760147393
Oct 11 01:49:58 IQ138000 python3[1970]: OLD SETTINGS: None
Oct 11 01:49:58 IQ138000 python3[1970]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 01:49:58 IQ138000 python3[1970]: New settings applied
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 python3[6478]: Connection 'LegacyWiFi' does not exist.
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 2.
Oct 11 01:49:58 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 01:49:58 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 01:49:58 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:49:58 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:49:58 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:49:58 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:49:58 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:49:58 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:49:58 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:49:58 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:49:58 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:49:58 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:49:58 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:49:58 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:49:58 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:49:58 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:49:58 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:49:58 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:49:58 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:49:58 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:49:58 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:49:58 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:49:58 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:49:58 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:58 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:49:58 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:49:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:49:58 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 lsyncd[6512]: 01:49:58 Normal: --- Startup ---
Oct 11 01:49:58 IQ138000 lsyncd[6512]: 01:49:58 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 01:49:58 IQ138000 lsyncd[6512]: journal
Oct 11 01:49:58 IQ138000 lsyncd[6512]: messages
Oct 11 01:49:58 IQ138000 lsyncd[6512]: iq_network_manager/iq_network_manager.log
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:49:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:49:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:49:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:49:58 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:49:58 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:49:58 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:49:58 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:49:58 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:49:58 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:49:58 IQ138000 python3[6493]: {
Oct 11 01:49:58 IQ138000 python3[6493]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 01:49:58 IQ138000 python3[6493]:     "tiers": {
Oct 11 01:49:58 IQ138000 python3[6493]:         "high": [
Oct 11 01:49:58 IQ138000 python3[6493]:             "wb-eth0",
Oct 11 01:49:58 IQ138000 python3[6493]:             "ServiceAP"
Oct 11 01:49:58 IQ138000 python3[6493]:         ],
Oct 11 01:49:58 IQ138000 python3[6493]:         "low": [
Oct 11 01:49:58 IQ138000 python3[6493]:             "wb-gsm-sim1",
Oct 11 01:49:58 IQ138000 python3[6493]:             "wb-gsm-sim2"
Oct 11 01:49:58 IQ138000 python3[6493]:         ],
Oct 11 01:49:58 IQ138000 python3[6493]:         "medium": []
Oct 11 01:49:58 IQ138000 python3[6493]:     },
Oct 11 01:49:58 IQ138000 python3[6493]:     "debug": false
Oct 11 01:49:58 IQ138000 python3[6493]: }
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:49:58 IQ138000 python3[1970]: COMMAND "systemctl is-active wb-connection-manager" exited with 3
Oct 11 01:49:58 IQ138000 python3[1970]: [stdout]
Oct 11 01:49:58 IQ138000 python3[1970]: "inactive
Oct 11 01:49:58 IQ138000 python3[1970]: "
Oct 11 01:49:58 IQ138000 python3[1970]: Service wb-connection-manager is not active. No action taken.
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:49:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 04:50:01.199+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T04:50:01.199Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147581216,"cmd_timestamp_ms":1760147401216,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147581216,"cmd_timestamp_ms":1760147401216,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 04:50:01.366+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T04:50:01.366Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147581381,"cmd_timestamp_ms":1760147401381,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760147581381,"cmd_timestamp_ms":1760147401381,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 04:50:01.462+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T04:50:01.462Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581477,"cmd_timestamp_ms":1760147401477,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581477,"cmd_timestamp_ms":1760147401477,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 04:50:01.580+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T04:50:01.580Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581594,"cmd_timestamp_ms":1760147401594,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581594,"cmd_timestamp_ms":1760147401594,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 04:50:01.684+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T04:50:01.684Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581696,"cmd_timestamp_ms":1760147401696,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581696,"cmd_timestamp_ms":1760147401696,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 04:50:01.779+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T04:50:01.779Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581791,"cmd_timestamp_ms":1760147401791,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581791,"cmd_timestamp_ms":1760147401791,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 04:50:01.907+00:00
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T04:50:01.907Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581926,"cmd_timestamp_ms":1760147401926,"source":"schedule"}
Oct 11 01:50:01 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147581926,"cmd_timestamp_ms":1760147401926,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 04:50:02.032+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T04:50:02.032Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147582046,"cmd_timestamp_ms":1760147402046,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760147582046,"cmd_timestamp_ms":1760147402046,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 04:50:02.282+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T04:50:02.282Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147582296,"cmd_timestamp_ms":1760147402296,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147582296,"cmd_timestamp_ms":1760147402296,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 04:50:02.396+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T04:50:02.396Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147582407,"cmd_timestamp_ms":1760147402407,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147582407,"cmd_timestamp_ms":1760147402407,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 04:50:02.554+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T04:50:02.554Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147582572,"cmd_timestamp_ms":1760147402572,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760147582572,"cmd_timestamp_ms":1760147402572,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 01:50:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 04:50:02.668+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T04:50:02.668Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147582678,"cmd_timestamp_ms":1760147402678,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147582678,"cmd_timestamp_ms":1760147402678,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 04:50:02.780+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T04:50:02.780Z","to":"2025-10-11T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147582791,"cmd_timestamp_ms":1760147402791,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760147582791,"cmd_timestamp_ms":1760147402791,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 04:50:02.898+00:00
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T04:50:02.898Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147582911,"cmd_timestamp_ms":1760147402911,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147582911,"cmd_timestamp_ms":1760147402911,"source":"schedule"}
Oct 11 01:50:02 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 04:50:03.013+00:00
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T04:50:03.013Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147583026,"cmd_timestamp_ms":1760147403026,"source":"schedule"}
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760147583026,"cmd_timestamp_ms":1760147403026,"source":"schedule"}
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 01:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 01:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 01:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 01:50:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 01:50:03 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 01:50:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:50:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:03 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:50:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:50:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:50:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:50:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:50:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:04 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 01:50:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:50:04 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 01:50:04 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:50:04 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:04 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:04 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:04 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:04 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:50:04 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:50:04 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:50:04 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:50:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:04 IQ138000 lsyncd[6512]: 01:50:04 Normal: Startup of "/var/log/p7/usr/bin/iqnergy/" finished: 0
Oct 11 01:50:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:50:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:50:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:50:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:50:08 IQ138000 do-upgrade.sh[2017]: 1760147408
Oct 11 01:50:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:09 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:09 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:09 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:50:09 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:09 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:09 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:09 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:09 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:09 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:09 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:09 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:09 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:09 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:09 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:09 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:09 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:09 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:09 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:09 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:09 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:50:09 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:50:09 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:09 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:09 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:50:09 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:50:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:50:09 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:09 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:50:09 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:09 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:09 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:09 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:50:09 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:50:09 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:50:09 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:50:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:14 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:50:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:50:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:50:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:50:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:50:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:50:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:50:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:50:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:50:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 01:50:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:19 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:50:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:50:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 01:50:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:50:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 01:50:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:19 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 01:50:19 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 01:50:19 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:19 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:19 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:50:19 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:50:19 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:50:19 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:50:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc --set-primary-sim-slot=2
Oct 11 01:50:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:24 IQ138000 ModemManager[472]: <info>  [modem0] mobile equipment forced PS detach: all contexts have been deactivated
Oct 11 01:50:24 IQ138000 ModemManager[472]: <info>  [modem0/bearer0] explicitly disconnected
Oct 11 01:50:24 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (home -> idle)
Oct 11 01:50:24 IQ138000 ModemManager[472]: <info>  [modem0] network request to deactivate context (cid 1)
Oct 11 01:50:25 IQ138000 ModemManager[472]: <info>  [modem0] network request to deactivate context (cid 3)
Oct 11 01:50:25 IQ138000 ModemManager[472]: <info>  [modem0/bearer0] explicitly disconnected
Oct 11 01:50:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:50:25 IQ138000 ModemManager[472]: <warn>  [modem0/bearer0] checking if connected failed: Couldn't check current list of active PDP contexts: Unknown error
Oct 11 01:50:25 IQ138000 pppd[5454]: LCP terminated by peer
Oct 11 01:50:25 IQ138000 NetworkManager[5454]: LCP terminated by peer
Oct 11 01:50:25 IQ138000 NetworkManager[5454]: Connect time 1.5 minutes.
Oct 11 01:50:25 IQ138000 NetworkManager[5454]: Sent 318222 bytes, received 1812544 bytes.
Oct 11 01:50:25 IQ138000 pppd[5454]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:50:25 IQ138000 pppd[5454]: Connect time 1.5 minutes.
Oct 11 01:50:25 IQ138000 pppd[5454]: Sent 318222 bytes, received 1812544 bytes.
Oct 11 01:50:25 IQ138000 pppd[5454]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:50:25 IQ138000 NetworkManager[404]: <info>  [1760147425.8750] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:50:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:50:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:50:26 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:50:26 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:50:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:50:27 IQ138000 ntpd[1651]: Deleting interface #4 *multiple*, 10.200.189.117#123, interface stats: received=75, sent=76, dropped=2, active_time=85 secs
Oct 11 01:50:27 IQ138000 ntpd[1651]: 51.250.35.68 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 89.109.251.22 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 185.209.85.222 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 217.28.222.15 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 151.0.2.54 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 92.255.126.4 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 94.241.142.113 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 85.142.100.8 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 85.193.65.152 local addr 10.200.189.117 -> <null>
Oct 11 01:50:27 IQ138000 ntpd[1651]: 46.138.254.88 local addr 10.200.189.117 -> <null>
Oct 11 01:50:28 IQ138000 pppd[5454]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 11 01:50:28 IQ138000 pppd[5454]: Connection terminated.
Oct 11 01:50:28 IQ138000 NetworkManager[5454]: Connection terminated.
Oct 11 01:50:28 IQ138000 avahi-daemon[367]: Withdrawing workstation service for ppp0.
Oct 11 01:50:28 IQ138000 NetworkManager[404]: <info>  [1760147428.8855] device (ttyUSB1): state change: activated -> failed (reason 'ppp-disconnect', sys-iface-state: 'managed')
Oct 11 01:50:28 IQ138000 NetworkManager[404]: <info>  [1760147428.8943] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:50:28 IQ138000 NetworkManager[404]: <warn>  [1760147428.9112] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim1'
Oct 11 01:50:28 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:50:28 IQ138000 NetworkManager[404]: <info>  [1760147428.9350] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:28 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:50:28 IQ138000 ModemManager[472]: <info>  [modem0] state changed (connected -> disconnecting)
Oct 11 01:50:29 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0173] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0223] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0232] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0266] manager: NetworkManager state is now CONNECTING
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <warn>  [1760147429.0281] modem-broadband[ttyUSB1]: failed to connect 'wb-gsm-sim1': unable to determine the network id
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0324] device (ttyUSB1): state change: prepare -> failed (reason 'modem-init-failed', sys-iface-state: 'managed')
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0357] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <warn>  [1760147429.0375] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim1'
Oct 11 01:50:29 IQ138000 NetworkManager[404]: <info>  [1760147429.0393] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:29 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:50:29 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:29 IQ138000 pppd[5454]: Terminating on signal 15
Oct 11 01:50:29 IQ138000 pppd[5454]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 11 01:50:29 IQ138000 NetworkManager[5454]: Terminating on signal 15
Oct 11 01:50:29 IQ138000 NetworkManager[5454]: Modem hangup
Oct 11 01:50:29 IQ138000 pppd[5454]: Modem hangup
Oct 11 01:50:29 IQ138000 pppd[5454]: nm-ppp-plugin: cleaning up
Oct 11 01:50:29 IQ138000 pppd[5454]: Exit.
Oct 11 01:50:30 IQ138000 vnstatd[1658]: Info: Interface "ppp0" disabled.
Oct 11 01:50:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:30 IQ138000 python3[1970]: Команда "mmcli -m wbc --set-primary-sim-slot=2" выполнена. Результат:
Oct 11 01:50:30 IQ138000 python3[1970]:  successfully requested primary SIM switch in modem
Oct 11 01:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:31 IQ138000 ModemManager[472]: <info>  [modem0] state changed (disconnecting -> enabled)
Oct 11 01:50:31 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabled -> disabling)
Oct 11 01:50:31 IQ138000 ModemManager[472]: <info>  [modem0/bearer0] connection #1 finished: duration 91s
Oct 11 01:50:32 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (idle -> unknown)
Oct 11 01:50:32 IQ138000 NetworkManager[404]: <info>  [1760147432.4536] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 11 01:50:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:34 IQ138000 ModemManager[472]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:50:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:36 IQ138000 ModemManager[472]: <warn>  [modem1] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:50:37 IQ138000 ModemManager[472]: <warn>  [modem1/sim1] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:50:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:37 IQ138000 ModemManager[472]: <warn>  [modem1/sim1] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:50:37 IQ138000 ModemManager[472]: <warn>  [modem1] couldn't load list of own numbers: Operation not supported
Oct 11 01:50:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:38 IQ138000 ModemManager[472]: <info>  [modem1] state changed (unknown -> disabled)
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3080] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/13)
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3101] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3120] device (ttyUSB1): modem state 'enabling'
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3141] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3163] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3232] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3245] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:38 IQ138000 ModemManager[472]: <info>  [modem1] state changed (disabled -> enabling)
Oct 11 01:50:38 IQ138000 NetworkManager[404]: <info>  [1760147438.3303] manager: NetworkManager state is now CONNECTING
Oct 11 01:50:38 IQ138000 ModemManager[472]: <info>  [modem1] power state updated: on
Oct 11 01:50:38 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/5
Oct 11 01:50:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:39 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:50:40 IQ138000 python3[1970]: Выполнение: mmcli -i any
Oct 11 01:50:41 IQ138000 python3[1970]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 01:50:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:41 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:50:41 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:50:41 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:50:41 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:50:41 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:50:41 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:50:41 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:41 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:41 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:50:41 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:41 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:41 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:41 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:41 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:41 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:41 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:41 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:41 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:41 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:41 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:41 IQ138000 python3[1970]:            |                state: enabling
Oct 11 01:50:41 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:41 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:41 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:41 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:50:41 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:50:41 IQ138000 python3[1970]: Current state:
Oct 11 01:50:42 IQ138000 ModemManager[472]: <info>  [modem1] state changed (enabling -> enabled)
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] 3GPP registration state changed (unknown -> registering)
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] 3GPP registration state changed (registering -> home)
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] state changed (enabled -> registered)
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] simple connect started...
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] simple connect state (6/10): register
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] simple connect state (8/10): bearer
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] simple connect state (9/10): connect
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] state changed (registered -> connecting)
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] state changed (connecting -> connected)
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] simple connect state (10/10): all done
Oct 11 01:50:43 IQ138000 NetworkManager[404]: <info>  [1760147443.5208] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:43 IQ138000 NetworkManager[404]: <info>  [1760147443.5232] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:50:43 IQ138000 NetworkManager[404]: <info>  [1760147443.5244] ppp-manager: starting PPP connection
Oct 11 01:50:43 IQ138000 NetworkManager[404]: <info>  [1760147443.5370] ppp-manager: pppd started with pid 7216
Oct 11 01:50:43 IQ138000 pppd[7216]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: initializing
Oct 11 01:50:43 IQ138000 pppd[7216]: pppd 2.4.9 started by root, uid 0
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:50:43 IQ138000 pppd[7216]: Using interface ppp0
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: Using interface ppp0
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:50:43 IQ138000 pppd[7216]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:50:43 IQ138000 NetworkManager[404]: <info>  [1760147443.5970] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/14)
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:50:43 IQ138000 pppd[7216]: PAP authentication succeeded
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: PAP authentication succeeded
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: kernel does not support PPP filtering
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:50:43 IQ138000 pppd[7216]: kernel does not support PPP filtering
Oct 11 01:50:43 IQ138000 ModemManager[472]: <info>  [modem1] mobile equipment request to activate context (cid 2)
Oct 11 01:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:50:43 IQ138000 pppd[7216]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:43 IQ138000 pppd[7216]: local  IP address 10.164.63.187
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: local  IP address 10.164.63.187
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: remote IP address 10.64.64.64
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: primary   DNS address 176.59.62.125
Oct 11 01:50:43 IQ138000 NetworkManager[7216]: secondary DNS address 176.59.62.126
Oct 11 01:50:43 IQ138000 pppd[7216]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:50:43 IQ138000 pppd[7216]: remote IP address 10.64.64.64
Oct 11 01:50:43 IQ138000 NetworkManager[404]: <info>  [1760147443.9994] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:50:43 IQ138000 pppd[7216]: primary   DNS address 176.59.62.125
Oct 11 01:50:43 IQ138000 pppd[7216]: secondary DNS address 176.59.62.126
Oct 11 01:50:44 IQ138000 pppd[7216]: nm-ppp-plugin: ip-up event
Oct 11 01:50:44 IQ138000 pppd[7216]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.0086] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.0113] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.0136] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.0184] policy: set 'wb-gsm-sim2' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.0698] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:44 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:50:44 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:50:44 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:50:44 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.1570] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.1584] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.1608] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.1642] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:50:44 IQ138000 NetworkManager[404]: <info>  [1760147444.1676] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:50:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:45 IQ138000 vnstatd[1658]: Info: Interface "ppp0" enabled.
Oct 11 01:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:45 IQ138000 ntpd[1651]: Listen normally on 5 ppp0 10.164.63.187:123
Oct 11 01:50:45 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 01:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:46 IQ138000 wb-watchdog[7293]: [INFO] Interval #4 started. Waiting up to 60 seconds for error...
Oct 11 01:50:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:50:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:50:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:50:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:51 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:51 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:50:51 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:50:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:50:51 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:50:51 IQ138000 python3[1970]: Current state: home
Oct 11 01:50:51 IQ138000 python3[1970]: SIM registered in the network.
Oct 11 01:50:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:50:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:51 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:51 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:50:51 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:50:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:50:51 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:50:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:51 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:50:51 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:51 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:51 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:51 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:50:51 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:50:51 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:50:51 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:50:51 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:50:51 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:50:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:50:55 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:50:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:50:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:50:56 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:50:56 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:50:56 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:50:56 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:50:56 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:50:56 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:50:56 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:50:56 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:50:56 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:50:56 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:50:56 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:50:56 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:50:56 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:50:56 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:50:56 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:50:56 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:50:56 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:50:56 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:50:56 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:50:56 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:50:56 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:50:56 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:56 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:50:56 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:50:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:50:56 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:56 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:50:56 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:50:56 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:50:56 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:50:56 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:50:56 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:50:56 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:50:56 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:50:56 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:50:56 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:50:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:50:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:50:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:50:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:50:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:01 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:01 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:01 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:01 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:01 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:01 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:01 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:01 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:01 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:01 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:01 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:01 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:01 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:01 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:01 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:01 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:01 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:01 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:01 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:01 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:01 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:01 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:01 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:01 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:01 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:01 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:01 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:01 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:01 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:01 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:01 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:01 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:01 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:01 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:01 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:01 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:06 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:06 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:06 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:06 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:06 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:06 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:06 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:06 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:06 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:06 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:12 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:12 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:12 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:12 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:12 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:12 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:12 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:12 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:12 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:12 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:12 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:12 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:12 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:12 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:12 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:12 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:12 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:12 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:12 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:12 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:12 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:12 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:12 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:12 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:12 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:51:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:12 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:12 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:12 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:12 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:12 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:12 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:51:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:51:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:51:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:51:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:51:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:51:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:51:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:17 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:17 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:17 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:17 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:17 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:17 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:17 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:17 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:17 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:17 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:17 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:17 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:17 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:17 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:17 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:17 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:17 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:17 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:17 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:17 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:17 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:17 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:17 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:17 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:17 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:17 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:17 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:17 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:17 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:17 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:17 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:51:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:22 IQ138000 python3[1970]:            |       signal quality: 83% (recent)
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:22 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:22 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:22 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:22 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:22 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:22 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:22 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:22 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:22 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:22 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:22 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:22 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:22 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:22 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:27 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:27 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:27 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:27 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:27 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:27 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:27 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:27 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:27 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:27 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:27 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:27 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:27 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:27 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:27 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:27 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:27 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:27 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:27 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:27 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:27 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:27 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:27 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:27 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:27 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:27 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:27 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:27 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:27 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:27 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:27 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:27 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:27 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:27 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:27 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:28 IQ138000 ntpd[1651]: Soliciting pool server 51.250.53.172
Oct 11 01:51:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:51:32 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:32 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:32 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:32 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:32 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:32 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:32 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:32 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:32 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:32 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:32 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:32 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:32 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:32 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:32 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:32 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:32 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:32 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:32 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:32 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:32 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:32 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:32 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:32 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:32 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:32 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:32 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:32 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:32 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:32 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:32 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:37 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:37 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:37 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:37 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:37 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:38 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:38 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:38 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:38 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:38 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:38 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:38 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:38 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:38 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:38 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:38 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 01:51:43 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:43 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:43 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:43 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:43 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:43 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:43 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:43 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:43 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:43 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:43 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:43 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:43 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:43 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:43 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:43 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:43 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:43 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:43 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:43 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:43 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:43 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:43 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:43 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:43 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:43 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:43 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:43 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:43 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:43 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:43 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:43 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:51:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:51:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:46 IQ138000 wb-watchdog[7974]: [INFO] Interval #5 started. Waiting up to 60 seconds for error...
Oct 11 01:51:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:51:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:48 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:48 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:48 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:48 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:48 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:48 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:48 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:48 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:48 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:48 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:53 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:53 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:53 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:53 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:53 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:53 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:53 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:53 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:53 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:51:53 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:53 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:53 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:53 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:53 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:53 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:53 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:53 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:53 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:53 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:51:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:51:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:51:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:51:58 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:51:58 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:51:58 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:51:58 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:51:58 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:51:58 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:51:58 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:51:58 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:51:58 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:51:58 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:51:58 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:51:58 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:51:58 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:51:58 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:51:58 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:51:58 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:51:58 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:51:58 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:51:58 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:51:58 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:51:58 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:51:58 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:51:58 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:58 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:51:58 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:51:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:51:58 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:51:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:51:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:51:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:51:58 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:51:58 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:51:58 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:51:58 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:51:58 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:51:58 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:51:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:52:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:52:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:52:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 01:52:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:52:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:52:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:52:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:52:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:52:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:52:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:52:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:52:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:52:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:52:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:52:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:52:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:52:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:52:03 IQ138000 python3[1970]:            |       signal quality: 80% (recent)
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:52:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:52:03 IQ138000 python3[1970]:            |          operator id: 25020
Oct 11 01:52:03 IQ138000 python3[1970]:            |        operator name: t2
Oct 11 01:52:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:52:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:52:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: none
Oct 11 01:52:03 IQ138000 python3[1970]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 01:52:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 01:52:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:52:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 01:52:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 01:52:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:52:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:52:03 IQ138000 python3[1970]:              |              imsi: 250207496118656
Oct 11 01:52:03 IQ138000 python3[1970]:              |             iccid: 89701206289022194789
Oct 11 01:52:03 IQ138000 python3[1970]:              |       operator id: 25020
Oct 11 01:52:03 IQ138000 python3[1970]:              |     operator name: t2
Oct 11 01:52:03 IQ138000 python3[1970]:              |              gid1: FFFF
Oct 11 01:52:03 IQ138000 python3[1970]:              |              gid2: FFFF
Oct 11 01:52:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:08 IQ138000 python3[1970]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 01:52:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:09 IQ138000 ModemManager[472]: <info>  [modem1] mobile equipment forced PS detach: all contexts have been deactivated
Oct 11 01:52:09 IQ138000 ModemManager[472]: <info>  [modem1/bearer1] explicitly disconnected
Oct 11 01:52:09 IQ138000 ModemManager[472]: <info>  [modem1] 3GPP registration state changed (home -> idle)
Oct 11 01:52:09 IQ138000 ModemManager[472]: <info>  [modem1] network request to deactivate context (cid 1)
Oct 11 01:52:09 IQ138000 ModemManager[472]: <info>  [modem1] network request to deactivate context (cid 2)
Oct 11 01:52:09 IQ138000 ModemManager[472]: <info>  [modem1/bearer1] explicitly disconnected
Oct 11 01:52:10 IQ138000 pppd[7216]: LCP terminated by peer
Oct 11 01:52:10 IQ138000 pppd[7216]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:52:10 IQ138000 NetworkManager[7216]: LCP terminated by peer
Oct 11 01:52:10 IQ138000 NetworkManager[7216]: Connect time 1.5 minutes.
Oct 11 01:52:10 IQ138000 NetworkManager[7216]: Sent 7550 bytes, received 8101 bytes.
Oct 11 01:52:10 IQ138000 pppd[7216]: Connect time 1.5 minutes.
Oct 11 01:52:10 IQ138000 NetworkManager[404]: <info>  [1760147530.2549] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:52:10 IQ138000 pppd[7216]: Sent 7550 bytes, received 8101 bytes.
Oct 11 01:52:10 IQ138000 pppd[7216]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:52:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:52:11 IQ138000 ntpd[1651]: Deleting interface #5 *multiple*, 10.164.63.187#123, interface stats: received=55, sent=56, dropped=1, active_time=86 secs
Oct 11 01:52:11 IQ138000 ntpd[1651]: 51.250.53.172 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 46.138.254.88 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 85.193.65.152 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 85.142.100.8 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 94.241.142.113 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 92.255.126.4 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 151.0.2.54 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 217.28.222.15 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 185.209.85.222 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 89.109.251.22 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 ntpd[1651]: 51.250.35.68 local addr 10.164.63.187 -> <null>
Oct 11 01:52:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:52:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:13 IQ138000 pppd[7216]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 11 01:52:13 IQ138000 pppd[7216]: Connection terminated.
Oct 11 01:52:13 IQ138000 NetworkManager[7216]: Connection terminated.
Oct 11 01:52:13 IQ138000 avahi-daemon[367]: Withdrawing workstation service for ppp0.
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.2737] device (ttyUSB1): state change: activated -> failed (reason 'ppp-disconnect', sys-iface-state: 'managed')
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.2762] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <warn>  [1760147533.2805] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim2'
Oct 11 01:52:13 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.2905] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:13 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:52:13 IQ138000 ModemManager[472]: <info>  [modem1] state changed (connected -> disconnecting)
Oct 11 01:52:13 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/5
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.3878] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.3924] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.3934] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.3958] manager: NetworkManager state is now CONNECTING
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <warn>  [1760147533.3978] modem-broadband[ttyUSB1]: failed to connect 'wb-gsm-sim2': unable to determine the network id
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.3985] device (ttyUSB1): state change: prepare -> failed (reason 'modem-init-failed', sys-iface-state: 'managed')
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.4013] manager: NetworkManager state is now DISCONNECTED
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <warn>  [1760147533.4044] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim2'
Oct 11 01:52:13 IQ138000 NetworkManager[404]: <info>  [1760147533.4062] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:13 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:52:13 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:52:14 IQ138000 python3[1970]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 01:52:14 IQ138000 python3[1970]:  successfully requested primary SIM switch in modem
Oct 11 01:52:14 IQ138000 pppd[7216]: Terminating on signal 15
Oct 11 01:52:14 IQ138000 pppd[7216]: Modem hangup
Oct 11 01:52:14 IQ138000 pppd[7216]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 11 01:52:14 IQ138000 NetworkManager[7216]: Terminating on signal 15
Oct 11 01:52:14 IQ138000 NetworkManager[7216]: Modem hangup
Oct 11 01:52:14 IQ138000 pppd[7216]: Exit.
Oct 11 01:52:14 IQ138000 pppd[7216]: nm-ppp-plugin: cleaning up
Oct 11 01:52:15 IQ138000 vnstatd[1658]: Info: Interface "ppp0" disabled.
Oct 11 01:52:15 IQ138000 ModemManager[472]: <info>  [modem1] state changed (disconnecting -> enabled)
Oct 11 01:52:15 IQ138000 ModemManager[472]: <info>  [modem1] state changed (enabled -> disabling)
Oct 11 01:52:15 IQ138000 ModemManager[472]: <info>  [modem1/bearer1] connection #1 finished: duration 92s
Oct 11 01:52:17 IQ138000 ModemManager[472]: <info>  [modem1] 3GPP registration state changed (idle -> unknown)
Oct 11 01:52:17 IQ138000 NetworkManager[404]: <info>  [1760147537.9971] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 11 01:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:52:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:52:19 IQ138000 python3[1970]: Выполнение: service wb-connection-manager start
Oct 11 01:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:20 IQ138000 ModemManager[472]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 01:52:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:20 IQ138000 ModemManager[472]: <warn>  [modem2] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 01:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:21 IQ138000 ModemManager[472]: <warn>  [modem2/sim2] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:52:21 IQ138000 ModemManager[472]: <warn>  [modem2/sim2] couldn't load GID1: SIM failure
Oct 11 01:52:21 IQ138000 ModemManager[472]: <warn>  [modem2/sim2] couldn't load GID2: SIM failure
Oct 11 01:52:21 IQ138000 ModemManager[472]: <warn>  [modem2/sim2] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 01:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:52:21 IQ138000 ModemManager[472]: <warn>  [modem2/sim2] couldn't load GID1: SIM failure
Oct 11 01:52:21 IQ138000 ModemManager[472]: <warn>  [modem2/sim2] couldn't load GID2: SIM failure
Oct 11 01:52:22 IQ138000 ModemManager[472]: <info>  [modem2] state changed (unknown -> disabled)
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3700] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/15)
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3728] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3748] device (ttyUSB1): modem state 'enabling'
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3770] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3804] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3857] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3866] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:22 IQ138000 NetworkManager[404]: <info>  [1760147542.3906] manager: NetworkManager state is now CONNECTING
Oct 11 01:52:22 IQ138000 ModemManager[472]: <info>  [modem2] state changed (disabled -> enabling)
Oct 11 01:52:22 IQ138000 ModemManager[472]: <info>  [modem2] power state updated: on
Oct 11 01:52:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/7
Oct 11 01:52:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:52:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:24 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:52:24 IQ138000 python3[1970]: Команда "service wb-connection-manager start" выполнена. Результат:
Oct 11 01:52:24 IQ138000 python3[1970]:  
Oct 11 01:52:24 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:52:25 IQ138000 wb-connection-manager[8532]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:52:25 IQ138000 wb-connection-manager[8532]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.3306] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8532 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:52:25 IQ138000 wb-connection-manager[8532]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6269] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6273] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8532 uid=0 result="success"
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6279] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6365] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6392] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6401] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6775] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6795] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6812] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6816] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6818] Config: added 'scan_ssid' value '1'
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6819] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6820] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.6821] Config: added 'psk' value '<hidden>'
Oct 11 01:52:25 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/8
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.7754] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:52:25 IQ138000 NetworkManager[404]: <info>  [1760147545.7756] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] state changed (enabling -> enabled)
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] 3GPP registration state changed (unknown -> registering)
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] 3GPP registration state changed (registering -> home)
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] state changed (enabled -> registered)
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] simple connect started...
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] simple connect state (6/10): register
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] simple connect state (7/10): wait to get packet service state attached
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] simple connect state (8/10): bearer
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] simple connect state (9/10): connect
Oct 11 01:52:26 IQ138000 ModemManager[472]: <info>  [modem2] state changed (registered -> connecting)
Oct 11 01:52:27 IQ138000 ModemManager[472]: <info>  [modem2] state changed (connecting -> connected)
Oct 11 01:52:27 IQ138000 ModemManager[472]: <info>  [modem2] simple connect state (10/10): all done
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.0579] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.0593] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.0602] ppp-manager: starting PPP connection
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.0713] ppp-manager: pppd started with pid 8555
Oct 11 01:52:27 IQ138000 pppd[8555]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: initializing
Oct 11 01:52:27 IQ138000 pppd[8555]: pppd 2.4.9 started by root, uid 0
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 01:52:27 IQ138000 pppd[8555]: Using interface ppp0
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: Using interface ppp0
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 01:52:27 IQ138000 pppd[8555]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.1355] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/16)
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 01:52:27 IQ138000 pppd[8555]: PAP authentication succeeded
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: PAP authentication succeeded
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: kernel does not support PPP filtering
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 01:52:27 IQ138000 pppd[8555]: kernel does not support PPP filtering
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:27 IQ138000 ModemManager[472]: <info>  [modem2] mobile equipment request to activate context (cid 3)
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:27 IQ138000 pppd[8555]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 01:52:27 IQ138000 pppd[8555]: local  IP address 10.34.0.171
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: local  IP address 10.34.0.171
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: remote IP address 10.64.64.64
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: primary   DNS address 172.23.10.130
Oct 11 01:52:27 IQ138000 NetworkManager[8555]: secondary DNS address 172.23.10.131
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 01:52:27 IQ138000 pppd[8555]: remote IP address 10.64.64.64
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.6246] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 01:52:27 IQ138000 pppd[8555]: primary   DNS address 172.23.10.130
Oct 11 01:52:27 IQ138000 pppd[8555]: secondary DNS address 172.23.10.131
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.6283] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: ip-up event
Oct 11 01:52:27 IQ138000 pppd[8555]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.6417] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.6432] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.6510] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.6905] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:27 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 01:52:27 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 01:52:27 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 01:52:27 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.7966] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.7980] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.8018] device (ttyUSB1): Activation: successful, device activated.
Oct 11 01:52:27 IQ138000 NetworkManager[404]: <info>  [1760147547.8056] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:29 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:52:29 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:52:29 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:52:29 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:52:29 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:52:29 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:52:29 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:52:29 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:52:29 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:52:29 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:52:29 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:52:29 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:52:29 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:52:29 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:52:29 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:52:29 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:52:29 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:52:29 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:52:29 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:52:29 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:52:29 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:52:29 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:52:29 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:52:29 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:52:29 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:52:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:52:29 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:52:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:52:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:52:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:52:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:52:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:52:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:52:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:52:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:52:30 IQ138000 vnstatd[1658]: Info: Interface "ppp0" enabled.
Oct 11 01:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:30 IQ138000 ntpd[1651]: Listen normally on 6 ppp0 10.34.0.171:123
Oct 11 01:52:30 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 01:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:52:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:52:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:52:31 IQ138000 python3[1970]: Command output: {
Oct 11 01:52:31 IQ138000 python3[1970]:     "wb-gsm-sim1": {
Oct 11 01:52:31 IQ138000 python3[1970]:         "250997340491874": {
Oct 11 01:52:31 IQ138000 python3[1970]:             "avg_signal_rating": 90.0,
Oct 11 01:52:31 IQ138000 python3[1970]:             "records": 1319,
Oct 11 01:52:31 IQ138000 python3[1970]:             "last_timestamp": {
Oct 11 01:52:31 IQ138000 python3[1970]:                 "iso": "2025-10-11T01:50:29",
Oct 11 01:52:31 IQ138000 python3[1970]:                 "timestamp": 1760147429
Oct 11 01:52:31 IQ138000 python3[1970]:             }
Oct 11 01:52:31 IQ138000 python3[1970]:         }
Oct 11 01:52:31 IQ138000 python3[1970]:     },
Oct 11 01:52:31 IQ138000 python3[1970]:     "wb-gsm-sim2": {
Oct 11 01:52:31 IQ138000 python3[1970]:         "250207496118656": {
Oct 11 01:52:31 IQ138000 python3[1970]:             "avg_signal_rating": 81.350622406639,
Oct 11 01:52:31 IQ138000 python3[1970]:             "records": 964,
Oct 11 01:52:31 IQ138000 python3[1970]:             "last_timestamp": {
Oct 11 01:52:31 IQ138000 python3[1970]:                 "iso": "2025-10-11T01:52:13",
Oct 11 01:52:31 IQ138000 python3[1970]:                 "timestamp": 1760147533
Oct 11 01:52:31 IQ138000 python3[1970]:             }
Oct 11 01:52:31 IQ138000 python3[1970]:         }
Oct 11 01:52:31 IQ138000 python3[1970]:     }
Oct 11 01:52:31 IQ138000 python3[1970]: }
Oct 11 01:52:31 IQ138000 python3[1970]: Data successfully saved to /tmp/network_status_cache.json
Oct 11 01:52:31 IQ138000 python3[1970]: Slots with signal ratings: [{'slot': 'wb-gsm-sim1', 'imsi': '250997340491874', 'avg_signal_rating': 90.0}, {'slot': 'wb-gsm-sim2', 'imsi': '250207496118656', 'avg_signal_rating': 81.350622406639}]
Oct 11 01:52:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:52:31 IQ138000 python3[8659]: {
Oct 11 01:52:31 IQ138000 python3[8659]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 01:52:31 IQ138000 python3[8659]:     "tiers": {
Oct 11 01:52:31 IQ138000 python3[8659]:         "high": [
Oct 11 01:52:31 IQ138000 python3[8659]:             "wb-eth0",
Oct 11 01:52:31 IQ138000 python3[8659]:             "ServiceAP"
Oct 11 01:52:31 IQ138000 python3[8659]:         ],
Oct 11 01:52:31 IQ138000 python3[8659]:         "low": [
Oct 11 01:52:31 IQ138000 python3[8659]:             "wb-gsm-sim2",
Oct 11 01:52:31 IQ138000 python3[8659]:             "wb-gsm-sim1"
Oct 11 01:52:31 IQ138000 python3[8659]:         ],
Oct 11 01:52:31 IQ138000 python3[8659]:         "medium": []
Oct 11 01:52:31 IQ138000 python3[8659]:     },
Oct 11 01:52:31 IQ138000 python3[8659]:     "debug": false
Oct 11 01:52:31 IQ138000 python3[8659]: }
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:52:31 IQ138000 python3[8662]: {
Oct 11 01:52:31 IQ138000 python3[8662]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 01:52:31 IQ138000 python3[8662]:     "tiers": {
Oct 11 01:52:31 IQ138000 python3[8662]:         "high": [
Oct 11 01:52:31 IQ138000 python3[8662]:             "wb-eth0",
Oct 11 01:52:31 IQ138000 python3[8662]:             "ServiceAP"
Oct 11 01:52:31 IQ138000 python3[8662]:         ],
Oct 11 01:52:31 IQ138000 python3[8662]:         "low": [
Oct 11 01:52:31 IQ138000 python3[8662]:             "wb-gsm-sim1",
Oct 11 01:52:31 IQ138000 python3[8662]:             "wb-gsm-sim2"
Oct 11 01:52:31 IQ138000 python3[8662]:         ],
Oct 11 01:52:31 IQ138000 python3[8662]:         "medium": []
Oct 11 01:52:31 IQ138000 python3[8662]:     },
Oct 11 01:52:31 IQ138000 python3[8662]:     "debug": false
Oct 11 01:52:31 IQ138000 python3[8662]: }
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' is temporarily empty. Skipping this update.
Oct 11 01:52:31 IQ138000 python3[1970]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 01:52:31 IQ138000 python3[8665]: {
Oct 11 01:52:31 IQ138000 python3[8665]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 01:52:31 IQ138000 python3[8665]:     "tiers": {
Oct 11 01:52:31 IQ138000 python3[8665]:         "high": [
Oct 11 01:52:31 IQ138000 python3[8665]:             "wb-eth0",
Oct 11 01:52:31 IQ138000 python3[8665]:             "ServiceAP"
Oct 11 01:52:31 IQ138000 python3[8665]:         ],
Oct 11 01:52:31 IQ138000 python3[8665]:         "low": [
Oct 11 01:52:31 IQ138000 python3[8665]:             "wb-gsm-sim1",
Oct 11 01:52:31 IQ138000 python3[8665]:             "wb-gsm-sim2"
Oct 11 01:52:31 IQ138000 python3[8665]:         ],
Oct 11 01:52:31 IQ138000 python3[8665]:         "medium": [
Oct 11 01:52:31 IQ138000 python3[8665]:             "LegacyWiFi"
Oct 11 01:52:31 IQ138000 python3[8665]:         ]
Oct 11 01:52:31 IQ138000 python3[8665]:     },
Oct 11 01:52:31 IQ138000 python3[8665]:     "debug": false
Oct 11 01:52:31 IQ138000 python3[8665]: }
Oct 11 01:52:31 IQ138000 python3[1970]: Выполнение: service wb-connection-manager restart
Oct 11 01:52:31 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 01:52:31 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 01:52:31 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 01:52:31 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 01:52:31 IQ138000 python3[1970]: Команда "service wb-connection-manager restart" выполнена. Результат:
Oct 11 01:52:31 IQ138000 python3[1970]:  
Oct 11 01:52:31 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:52:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:31 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:52:31 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:52:31 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:52:31 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:52:31 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:52:31 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:52:31 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:52:31 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:52:31 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:52:31 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:52:31 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:52:31 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:52:31 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:52:31 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:52:31 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:52:31 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:52:31 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:52:31 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:52:31 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:52:31 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:52:31 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:52:31 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:52:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:31 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:52:31 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:52:32 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:52:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:52:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:52:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:52:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:52:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:52:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:52:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:52:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:52:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:52:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:52:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:32 IQ138000 wb-connection-manager[8671]: Connection LegacyWiFi not found, skipping
Oct 11 01:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:32 IQ138000 wb-connection-manager[8671]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 01:52:32 IQ138000 wb-connection-manager[8671]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 01:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.1040] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:52:33 IQ138000 wb-connection-manager[8671]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 01:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.5315] device (wlan1): state change: config -> deactivating (reason 'user-requested', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.5396] audit: op="connection-deactivate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.5524] device (wlan1): state change: deactivating -> disconnected (reason 'user-requested', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.5941] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.5945] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:52:33 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/8
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6198] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6217] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6244] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6370] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6408] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6410] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6569] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6611] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6646] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6649] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6651] Config: added 'scan_ssid' value '1'
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6652] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6653] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:52:33 IQ138000 NetworkManager[404]: <info>  [1760147553.6654] Config: added 'psk' value '<hidden>'
Oct 11 01:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:33 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 11 01:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:35 IQ138000 python3[1970]: OLD SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 01:52:35 IQ138000 python3[1970]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:52:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:37 IQ138000 ntpd[1651]: Soliciting pool server 89.109.251.26
Oct 11 01:52:37 IQ138000 NetworkManager[404]: <info>  [1760147557.7444] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:52:37 IQ138000 NetworkManager[404]: <info>  [1760147557.7446] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:38 IQ138000 ntpd[1651]: Soliciting pool server 92.241.12.152
Oct 11 01:52:38 IQ138000 ntpd[1651]: Soliciting pool server 195.218.227.230
Oct 11 01:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:39 IQ138000 ntpd[1651]: Soliciting pool server 162.159.200.1
Oct 11 01:52:39 IQ138000 ntpd[1651]: Soliciting pool server 94.100.180.133
Oct 11 01:52:39 IQ138000 ntpd[1651]: Soliciting pool server 178.186.166.30
Oct 11 01:52:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:52:44 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 01:52:44 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.362s CPU time.
Oct 11 01:52:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:46 IQ138000 wb-watchdog[8824]: [INFO] Interval #6 started. Waiting up to 60 seconds for error...
Oct 11 01:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:52:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:52:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:52:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:52:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:52:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:52:58 IQ138000 NetworkManager[404]: <warn>  [1760147578.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:52:58 IQ138000 NetworkManager[404]: <info>  [1760147578.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:52:58 IQ138000 NetworkManager[404]: <warn>  [1760147578.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:52:58 IQ138000 NetworkManager[404]: <info>  [1760147578.5355] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:52:58 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 11 01:52:58 IQ138000 NetworkManager[404]: <info>  [1760147578.5738] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:52:58 IQ138000 NetworkManager[404]: <info>  [1760147578.5740] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:52:58 IQ138000 wb-connection-manager[8671]: Error during connection "ServiceAP" checking: org.freedesktop.DBus.Error.UnknownMethod: No such interface “org.freedesktop.DBus.Properties” on object at path /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 11 01:52:59 IQ138000 wb-connection-manager[8671]: Armed sticky timeout until 2025-10-11T02:07:59.114523 for device ttyUSB1
Oct 11 01:52:59 IQ138000 wb-connection-manager[8671]: Current connection changed to wb-gsm-sim1
Oct 11 01:52:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:02 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:53:02 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:53:02 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:53:02 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:53:02 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:53:02 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:53:02 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:53:02 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:53:02 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:53:02 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:53:02 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:53:02 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:53:02 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:53:02 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:53:02 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:53:02 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:53:02 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:53:02 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:53:02 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:53:02 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:53:02 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:53:02 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:53:02 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:53:02 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:53:02 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:53:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:53:02 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:53:02 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:53:02 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:53:02 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:53:02 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:53:02 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:53:02 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:53:02 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:53:02 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:53:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 01:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:53:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:53:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:53:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:53:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:32 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:53:32 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:53:32 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:53:32 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:53:32 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:53:32 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:53:32 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:53:32 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:53:32 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:53:32 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:53:32 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:53:32 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:53:32 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:53:32 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:53:32 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:53:32 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:53:32 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:53:32 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:53:32 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:53:32 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:53:32 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:53:32 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:53:32 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:53:32 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:53:32 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:53:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:53:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:53:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:53:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:53:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:53:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:53:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:53:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:53:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:53:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:53:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:37 IQ138000 NetworkManager[404]: <info>  [1760147617.5379] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:53:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:53:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:53:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:53:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:46 IQ138000 wb-watchdog[9449]: [INFO] Interval #7 started. Waiting up to 60 seconds for error...
Oct 11 01:53:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:53:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:53:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:53:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 01:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8169] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8174] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8180] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8261] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8277] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8278] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8376] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8395] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8413] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8418] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8419] Config: added 'scan_ssid' value '1'
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8420] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8421] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.8422] Config: added 'psk' value '<hidden>'
Oct 11 01:53:59 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/10
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.9328] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:53:59 IQ138000 NetworkManager[404]: <info>  [1760147639.9330] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:54:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:54:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:54:02 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:54:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:02 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:54:02 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:54:02 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:54:02 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:54:02 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:54:02 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:54:02 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:54:02 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:54:02 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:54:02 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:54:02 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:54:02 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:54:02 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:54:02 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:54:02 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:54:02 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:54:02 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:54:02 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:54:02 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:54:02 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:54:02 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:54:02 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:54:02 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:54:02 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:54:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:54:02 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:54:02 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:54:02 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:54:02 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:54:02 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:54:02 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:54:02 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:54:02 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:54:02 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:54:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:54:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:54:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:54:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:54:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:54:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:54:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:25 IQ138000 NetworkManager[404]: <warn>  [1760147665.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:54:25 IQ138000 NetworkManager[404]: <info>  [1760147665.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:54:25 IQ138000 NetworkManager[404]: <warn>  [1760147665.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:54:25 IQ138000 NetworkManager[404]: <info>  [1760147665.5352] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:54:25 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:54:25 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/10
Oct 11 01:54:25 IQ138000 NetworkManager[404]: <info>  [1760147665.5766] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:54:25 IQ138000 NetworkManager[404]: <info>  [1760147665.5776] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:26 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:32 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:54:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:32 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:54:32 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:54:32 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:54:32 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:54:32 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:54:32 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:54:32 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:54:32 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:54:32 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:54:32 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:54:32 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:54:32 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:54:32 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:54:32 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:54:32 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:54:32 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:54:32 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:54:32 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:54:32 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:54:32 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:54:32 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:54:32 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:54:32 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:54:32 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:54:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:54:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:54:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:54:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:54:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:54:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:54:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:54:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:54:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:54:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:54:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:42 IQ138000 NetworkManager[404]: <info>  [1760147682.5516] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:54:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:46 IQ138000 wb-watchdog[10171]: [INFO] Interval #8 started. Waiting up to 60 seconds for error...
Oct 11 01:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:54:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12828 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:54:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:54:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:54:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:54:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:54:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:54:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:54:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:54:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:54:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:54:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:54:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:54:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:55:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:01 IQ138000 CRON[10360]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 01:55:01 IQ138000 CRON[10364]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 01:55:01 IQ138000 CRON[10360]: pam_unix(cron:session): session closed for user root
Oct 11 01:55:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:02 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:55:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:55:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:55:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:55:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:55:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:55:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:55:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:55:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:55:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:55:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:55:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:55:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:55:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:55:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:55:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:55:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:55:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:55:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:55:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:55:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:55:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:55:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:55:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:55:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:55:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:55:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:55:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:55:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:55:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:55:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:55:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:55:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:55:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:55:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:55:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:55:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:55:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:55:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:55:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:55:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:55:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7649] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7667] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7675] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7745] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7791] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7794] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7928] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7957] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7977] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7980] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7984] Config: added 'scan_ssid' value '1'
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7985] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7987] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:55:26 IQ138000 NetworkManager[404]: <info>  [1760147726.7988] Config: added 'psk' value '<hidden>'
Oct 11 01:55:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:26 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/11
Oct 11 01:55:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:29 IQ138000 NetworkManager[404]: <info>  [1760147729.8755] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:55:29 IQ138000 NetworkManager[404]: <info>  [1760147729.8757] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:55:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:55:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:55:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:33 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:55:33 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:55:33 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:55:33 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:55:33 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:55:33 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:55:33 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:55:33 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:55:33 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:55:33 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:55:33 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:55:33 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:55:33 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:55:33 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:55:33 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:55:33 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:55:33 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:55:33 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:55:33 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:55:33 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:55:33 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:55:33 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:55:33 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:55:33 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:55:33 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:55:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:55:33 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:55:33 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:55:33 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:55:33 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:55:33 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:55:33 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:55:33 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:55:33 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:55:33 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:55:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:55:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:55:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:55:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:55:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:55:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:55:46 IQ138000 wb-watchdog[10773]: [INFO] Interval #9 started. Waiting up to 60 seconds for error...
Oct 11 01:55:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:55:52 IQ138000 NetworkManager[404]: <warn>  [1760147752.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:55:52 IQ138000 NetworkManager[404]: <info>  [1760147752.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:55:52 IQ138000 NetworkManager[404]: <warn>  [1760147752.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:55:52 IQ138000 NetworkManager[404]: <info>  [1760147752.5354] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:55:52 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/11
Oct 11 01:55:52 IQ138000 NetworkManager[404]: <info>  [1760147752.5743] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:55:52 IQ138000 NetworkManager[404]: <info>  [1760147752.5745] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:55:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:58 IQ138000 NetworkManager[404]: <info>  [1760147758.5384] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:56:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:56:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:56:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:56:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:56:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:56:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:56:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:56:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:56:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:56:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:56:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:56:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:56:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:56:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:56:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:56:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:56:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:56:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:56:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:56:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:56:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:56:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:56:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:56:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:56:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:56:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:56:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:56:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:56:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:56:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:56:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:56:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:56:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:56:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:56:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:56:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:56:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:12 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:56:12 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:56:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:56:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:56:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:56:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:56:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:29 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:56:29 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:56:33 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:56:33 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:56:33 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:56:33 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:56:33 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:56:33 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:56:33 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:56:33 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:56:33 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:56:33 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:56:33 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:56:33 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:56:33 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:56:33 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:56:33 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:56:33 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:56:33 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:56:33 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:56:33 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:56:33 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:56:33 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:56:33 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:56:33 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:56:33 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:56:33 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:56:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:56:33 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:56:33 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:56:33 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:56:33 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:56:33 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:56:33 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:56:33 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:56:33 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:56:33 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:56:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:56:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:56:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:56:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:46 IQ138000 wb-watchdog[11477]: [INFO] Interval #10 started. Waiting up to 60 seconds for error...
Oct 11 01:56:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:56:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7669] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7683] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7693] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7758] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7779] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7781] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7881] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7902] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7924] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7927] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7928] Config: added 'scan_ssid' value '1'
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7929] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7930] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.7931] Config: added 'psk' value '<hidden>'
Oct 11 01:56:53 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/12
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.8665] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:56:53 IQ138000 NetworkManager[404]: <info>  [1760147813.8668] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:57:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:57:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:57:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:57:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:57:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:57:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:57:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:57:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:57:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:57:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:57:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:57:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:57:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:57:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:57:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:57:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:57:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:57:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:57:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:57:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:57:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:57:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:57:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:57:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:57:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:57:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:57:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:57:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:57:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:57:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:57:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:57:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:57:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:57:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:57:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:57:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:57:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:57:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:19 IQ138000 NetworkManager[404]: <warn>  [1760147839.5310] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:57:19 IQ138000 NetworkManager[404]: <info>  [1760147839.5312] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:57:19 IQ138000 NetworkManager[404]: <warn>  [1760147839.5356] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:57:19 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:57:19 IQ138000 NetworkManager[404]: <info>  [1760147839.5371] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:57:19 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/12
Oct 11 01:57:19 IQ138000 NetworkManager[404]: <info>  [1760147839.5784] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:57:19 IQ138000 NetworkManager[404]: <info>  [1760147839.5786] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:57:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:20 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:57:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:57:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:57:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:57:25 IQ138000 NetworkManager[404]: <info>  [1760147845.5163] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:57:33 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:57:34 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:57:34 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:57:34 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:57:34 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:57:34 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:57:34 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:57:34 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:57:34 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:57:34 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:57:34 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:57:34 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:57:34 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:57:34 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:57:34 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:57:34 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:57:34 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:57:34 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:57:34 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:57:34 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:57:34 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:57:34 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:57:34 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:57:34 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:57:34 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:57:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:57:34 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:57:34 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:57:34 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:57:34 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:57:34 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:57:34 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:57:34 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:57:34 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:57:34 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:57:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:57:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:57:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:46 IQ138000 wb-watchdog[12080]: [INFO] Interval #11 started. Waiting up to 60 seconds for error...
Oct 11 01:57:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:57:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:57:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:57:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:57:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:57:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:57:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:58:04 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:58:04 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:58:04 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:58:04 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:58:04 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:58:04 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:58:04 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:58:04 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:58:04 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:58:04 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:58:04 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:58:04 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:58:04 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:58:04 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:58:04 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:58:04 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:58:04 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:58:04 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:58:04 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:58:04 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:58:04 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:58:04 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:58:04 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:58:04 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:58:04 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:58:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:58:04 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:58:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:04 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:58:04 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:58:04 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:58:04 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:58:04 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:58:04 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:58:04 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:58:04 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:58:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:58:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:58:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:58:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:58:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:58:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.7768] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.7775] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.7782] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.7957] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.7989] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.7992] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8095] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8118] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8139] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8142] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8143] Config: added 'scan_ssid' value '1'
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8144] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8145] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:58:20 IQ138000 NetworkManager[404]: <info>  [1760147900.8146] Config: added 'psk' value '<hidden>'
Oct 11 01:58:20 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/13
Oct 11 01:58:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4616 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:58:24 IQ138000 NetworkManager[404]: <info>  [1760147904.9193] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:58:24 IQ138000 NetworkManager[404]: <info>  [1760147904.9222] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:58:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:58:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:58:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:58:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:34 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:58:34 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:58:34 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:58:34 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:58:34 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:58:34 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:58:34 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:58:34 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:58:34 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:58:34 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:58:34 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:58:34 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:58:34 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:58:34 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:58:34 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:58:34 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:58:34 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:58:34 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:58:34 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:58:34 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:58:34 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:58:34 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:58:34 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:58:34 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:58:34 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:58:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:58:34 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:58:34 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:58:34 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:58:34 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:58:34 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:58:34 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:58:34 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:58:34 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:58:34 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:58:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:58:46 IQ138000 wb-watchdog[12796]: [INFO] Interval #12 started. Waiting up to 60 seconds for error...
Oct 11 01:58:46 IQ138000 NetworkManager[404]: <warn>  [1760147926.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 01:58:46 IQ138000 NetworkManager[404]: <info>  [1760147926.5313] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 01:58:46 IQ138000 NetworkManager[404]: <warn>  [1760147926.5343] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 01:58:46 IQ138000 NetworkManager[404]: <info>  [1760147926.5357] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 01:58:46 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/13
Oct 11 01:58:46 IQ138000 NetworkManager[404]: <info>  [1760147926.5781] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 01:58:46 IQ138000 NetworkManager[404]: <info>  [1760147926.5783] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 01:58:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:58:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:58:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:58:49 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:58:49 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:58:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:51 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 01:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:58:52 IQ138000 NetworkManager[404]: <info>  [1760147932.5656] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:58:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:58:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:58:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:58:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:58:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:58:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:04 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:59:04 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:59:04 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:59:04 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:59:04 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:59:04 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:59:04 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:59:04 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:59:04 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:59:04 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:59:04 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:59:04 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:59:04 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:59:04 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:59:04 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:59:04 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:59:04 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:59:04 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:59:04 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:59:04 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:59:04 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:59:04 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:59:04 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:59:04 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:59:04 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:59:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:59:04 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:04 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:59:04 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:59:04 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:59:04 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:59:04 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:59:04 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:59:04 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:59:04 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:59:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:59:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:59:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:59:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:59:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:59:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 01:59:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:59:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:59:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:59:28 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:59:28 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:59:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 01:59:34 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 01:59:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:34 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 01:59:34 IQ138000 python3[1970]:    --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 01:59:34 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 01:59:34 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 01:59:34 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 01:59:34 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 01:59:34 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 01:59:34 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 01:59:34 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 01:59:34 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 01:59:34 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 01:59:34 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 01:59:34 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 01:59:34 IQ138000 python3[1970]:            |                state: connected
Oct 11 01:59:34 IQ138000 python3[1970]:            |          power state: on
Oct 11 01:59:34 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 01:59:34 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 01:59:34 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 01:59:34 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 01:59:34 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 01:59:34 IQ138000 python3[1970]:            |         registration: home
Oct 11 01:59:34 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:59:34 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 01:59:34 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 01:59:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 01:59:34 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:59:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:34 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 01:59:34 IQ138000 python3[1970]:    -------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 01:59:34 IQ138000 python3[1970]:   -------------------------------
Oct 11 01:59:34 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 01:59:34 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 01:59:34 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 01:59:34 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 01:59:34 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L3, row count 7183, limit 7042
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:59:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:59:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:59:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:59:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:46 IQ138000 wb-watchdog[13421]: [INFO] Interval #13 started. Waiting up to 60 seconds for error...
Oct 11 01:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7287] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7293] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7299] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7422] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7449] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7451] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7554] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7578] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7612] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7616] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7618] Config: added 'scan_ssid' value '1'
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7619] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7622] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 01:59:47 IQ138000 NetworkManager[404]: <info>  [1760147987.7624] Config: added 'psk' value '<hidden>'
Oct 11 01:59:47 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/14
Oct 11 01:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 01:59:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 01:59:49 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 01:59:49 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:59:50 IQ138000 NetworkManager[404]: <info>  [1760147990.8400] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 01:59:50 IQ138000 NetworkManager[404]: <info>  [1760147990.8402] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 01:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 01:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 01:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 01:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 01:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 01:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 01:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:00:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:05 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:00:05 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:00:05 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:00:05 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:00:05 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:00:05 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:00:05 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:00:05 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:00:05 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:00:05 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:00:05 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:00:05 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:00:05 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:00:05 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:00:05 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:00:05 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:00:05 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:00:05 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:00:05 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:00:05 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:00:05 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:00:05 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:00:05 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:00:05 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:00:05 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:00:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:00:05 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:00:05 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:00:05 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:00:05 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:00:05 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:00:05 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:00:05 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:00:05 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:00:05 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:00:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:00:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:12 IQ138000 NetworkManager[404]: <warn>  [1760148012.5303] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:00:12 IQ138000 NetworkManager[404]: <info>  [1760148012.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:00:12 IQ138000 NetworkManager[404]: <warn>  [1760148012.5335] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:00:12 IQ138000 NetworkManager[404]: <info>  [1760148012.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:00:12 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/14
Oct 11 02:00:12 IQ138000 NetworkManager[404]: <info>  [1760148012.5804] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:00:12 IQ138000 NetworkManager[404]: <info>  [1760148012.5806] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:00:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:15 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:00:15 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:18 IQ138000 NetworkManager[404]: <info>  [1760148018.4681] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:00:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:00:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:00:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:00:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:00:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:35 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:00:35 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:00:35 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:00:35 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:00:35 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:00:35 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:00:35 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:00:35 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:00:35 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:00:35 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:00:35 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:00:35 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:00:35 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:00:35 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:00:35 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:00:35 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:00:35 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:00:35 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:00:35 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:00:35 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:00:35 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:00:35 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:00:35 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:00:35 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:00:35 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:00:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:00:35 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:00:35 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:00:35 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:00:35 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:00:35 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:00:35 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:00:35 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:00:35 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:00:35 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:00:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:00:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:00:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:00:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:46 IQ138000 wb-watchdog[14115]: [INFO] Interval #14 started. Waiting up to 60 seconds for error...
Oct 11 02:00:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:00:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:00:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:00:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:00:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:00:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:00:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:00:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:01:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:01:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:01:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:01:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:01:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:01:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:01:05 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:01:05 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:01:05 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:01:05 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:01:05 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:01:05 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:01:05 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:01:05 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:01:05 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:01:05 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:01:05 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:01:05 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:01:05 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:01:05 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:01:05 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:01:05 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:01:05 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:01:05 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:01:05 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:01:05 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:01:05 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:01:05 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:01:05 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:01:05 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:01:05 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:01:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:01:05 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:01:05 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:01:05 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:01:05 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:01:05 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:01:05 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:01:05 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:01:05 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:01:05 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:01:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7200] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7205] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7211] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7271] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7289] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7293] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7391] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7429] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7450] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7453] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7455] Config: added 'scan_ssid' value '1'
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7456] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7457] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.7458] Config: added 'psk' value '<hidden>'
Oct 11 02:01:13 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/15
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.8121] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:01:13 IQ138000 NetworkManager[404]: <info>  [1760148073.8123] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:01:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:01:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:01:35 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:01:35 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:01:35 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:01:35 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:01:35 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:01:35 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:01:35 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:01:35 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:01:35 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:01:35 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:01:35 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:01:35 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:01:35 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:01:35 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:01:35 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:01:35 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:01:35 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:01:35 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:01:35 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:01:35 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:01:35 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:01:35 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:01:35 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:01:35 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:01:35 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:01:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:01:35 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:01:35 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:01:35 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:01:35 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:01:35 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:01:35 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:01:35 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:01:35 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:01:35 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:01:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:38 IQ138000 NetworkManager[404]: <warn>  [1760148098.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:01:38 IQ138000 NetworkManager[404]: <info>  [1760148098.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:01:38 IQ138000 NetworkManager[404]: <warn>  [1760148098.5350] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:01:38 IQ138000 NetworkManager[404]: <info>  [1760148098.5363] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:01:38 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/15
Oct 11 02:01:38 IQ138000 NetworkManager[404]: <info>  [1760148098.5773] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:01:38 IQ138000 NetworkManager[404]: <info>  [1760148098.5775] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:01:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:01:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:01:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:01:44 IQ138000 NetworkManager[404]: <info>  [1760148104.4833] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:01:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:01:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:46 IQ138000 wb-watchdog[14725]: [INFO] Interval #15 started. Waiting up to 60 seconds for error...
Oct 11 02:01:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:01:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:01:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:02:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:02:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:02:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:05 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:02:05 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:02:05 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:02:05 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:02:05 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:02:05 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:02:05 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:02:05 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:02:05 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:02:05 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:02:05 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:02:05 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:02:05 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:02:05 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:02:05 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:02:05 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:02:05 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:02:05 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:02:05 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:02:05 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:02:05 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:02:05 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:02:05 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:02:05 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:02:05 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:02:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:02:05 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:02:05 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:02:05 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:02:05 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:02:05 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:02:05 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:02:05 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:02:05 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:02:05 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:02:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:02:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:02:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:02:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:02:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:02:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:02:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:02:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:02:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:02:36 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:02:36 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:02:36 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:02:36 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:02:36 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:02:36 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:02:36 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:02:36 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:02:36 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:02:36 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:02:36 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:02:36 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:02:36 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:02:36 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:02:36 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:02:36 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:02:36 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:02:36 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:02:36 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:02:36 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:02:36 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:02:36 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:02:36 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:02:36 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:02:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:02:36 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:02:36 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:02:36 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:02:36 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:02:36 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:02:36 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:02:36 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:02:36 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:02:36 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8732 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8568] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8601] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8625] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8730] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8778] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8784] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.8919] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9012] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9032] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9035] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9036] Config: added 'scan_ssid' value '1'
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9037] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9039] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9040] Config: added 'psk' value '<hidden>'
Oct 11 02:02:39 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/16
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9899] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:02:39 IQ138000 NetworkManager[404]: <info>  [1760148159.9901] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:02:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:41 IQ138000 systemd[1]: Starting Cleanup of Temporary Directories...
Oct 11 02:02:41 IQ138000 systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
Oct 11 02:02:41 IQ138000 systemd[1]: Finished Cleanup of Temporary Directories.
Oct 11 02:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:42 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:02:42 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:02:46 IQ138000 wb-watchdog[15421]: [INFO] Interval #16 started. Waiting up to 60 seconds for error...
Oct 11 02:02:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:02:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:02:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:02:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:02:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:02:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:02:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:02:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:03:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:03:05 IQ138000 NetworkManager[404]: <warn>  [1760148185.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:03:05 IQ138000 NetworkManager[404]: <info>  [1760148185.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:03:05 IQ138000 NetworkManager[404]: <warn>  [1760148185.5340] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:03:05 IQ138000 NetworkManager[404]: <info>  [1760148185.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:03:05 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/16
Oct 11 02:03:05 IQ138000 NetworkManager[404]: <info>  [1760148185.5745] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:03:05 IQ138000 NetworkManager[404]: <info>  [1760148185.5747] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:03:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:03:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:03:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:03:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:03:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:03:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:03:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:03:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:03:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:03:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:03:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:03:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:03:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:03:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:03:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:03:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:03:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:03:06 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:03:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:03:06 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:03:06 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:03:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:03:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:03:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:03:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:03:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:03:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:03:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:03:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:03:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:03:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:03:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:03:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:03:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:03:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:11 IQ138000 NetworkManager[404]: <info>  [1760148191.6718] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:03:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:03:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:03:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:03:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:03:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:03:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:03:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:03:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:03:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:03:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:03:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:03:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:03:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:03:36 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:03:36 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:03:36 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:03:36 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:03:36 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:03:36 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:03:36 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:03:36 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:03:36 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:03:36 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:03:36 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:03:36 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:03:36 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:03:36 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:03:36 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:03:36 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:03:36 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:03:36 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:03:36 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:03:36 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:03:36 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:03:36 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:03:36 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:03:36 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:03:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:03:36 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:03:36 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:03:36 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:03:36 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:03:36 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:03:36 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:03:36 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:03:36 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:03:36 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:03:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:03:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:46 IQ138000 wb-watchdog[16041]: [INFO] Interval #17 started. Waiting up to 60 seconds for error...
Oct 11 02:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 5144 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:03:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:03:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:03:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:03:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:03:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:04:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:04:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:04:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:04:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:04:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:04:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:04:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:04:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:04:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:04:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:04:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:04:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:04:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:04:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:04:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:04:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:04:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:04:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:04:06 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:04:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:04:06 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:04:06 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:04:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:04:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:04:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:04:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:04:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:04:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:04:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:04:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:04:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:04:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:04:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:04:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:04:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:04:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0551] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0555] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0562] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0645] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0676] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0678] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0764] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0792] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0814] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0817] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0818] Config: added 'scan_ssid' value '1'
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0820] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0821] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.0822] Config: added 'psk' value '<hidden>'
Oct 11 02:04:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/17
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.1564] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:04:07 IQ138000 NetworkManager[404]: <info>  [1760148247.1566] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:04:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:04:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:04:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:04:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:32 IQ138000 NetworkManager[404]: <warn>  [1760148272.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:04:32 IQ138000 NetworkManager[404]: <info>  [1760148272.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:04:32 IQ138000 NetworkManager[404]: <warn>  [1760148272.5356] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:04:32 IQ138000 NetworkManager[404]: <info>  [1760148272.5375] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:04:32 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:04:32 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/17
Oct 11 02:04:32 IQ138000 NetworkManager[404]: <info>  [1760148272.5764] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:04:32 IQ138000 NetworkManager[404]: <info>  [1760148272.5767] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:04:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:33 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:04:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:36 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:04:36 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:04:36 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:04:36 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:04:36 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:04:36 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:04:36 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:04:36 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:04:36 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:04:36 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:04:36 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:04:36 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:04:36 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:04:36 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:04:36 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:04:36 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:04:36 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:04:36 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:04:36 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:04:36 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:04:36 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:04:36 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:04:36 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:04:36 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:04:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:04:36 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:04:36 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:04:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:04:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:04:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:04:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:04:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:04:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:04:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:04:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:38 IQ138000 NetworkManager[404]: <info>  [1760148278.7904] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:47 IQ138000 wb-watchdog[16759]: [INFO] Interval #18 started. Waiting up to 60 seconds for error...
Oct 11 02:04:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:04:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:04:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:04:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:04:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:04:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 CRON[16950]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:05:01 IQ138000 CRON[16954]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 02:05:01 IQ138000 ntpd[1651]: 89.109.251.26 local addr 10.34.0.171 -> <null>
Oct 11 02:05:01 IQ138000 CRON[16950]: pam_unix(cron:session): session closed for user root
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:03 IQ138000 ntpd[1651]: 178.186.166.30 local addr 10.34.0.171 -> <null>
Oct 11 02:05:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:05:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:05:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:05:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:07 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:05:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:07 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:05:07 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:05:07 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:05:07 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:05:07 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:05:07 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:05:07 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:05:07 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:05:07 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:05:07 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:05:07 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:05:07 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:05:07 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:05:07 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:05:07 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:05:07 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:05:07 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:05:07 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:05:07 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:05:07 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:05:07 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:05:07 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:05:07 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:05:07 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:05:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:05:07 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:05:07 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:05:07 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:05:07 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:05:07 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:05:07 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:05:07 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:05:07 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:05:07 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:05:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:08 IQ138000 ntpd[1651]: 92.241.12.152 local addr 10.34.0.171 -> <null>
Oct 11 02:05:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:05:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:05:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:05:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:05:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:05:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:05:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0336] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0354] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0363] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0502] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0534] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0536] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0713] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0752] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0792] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0795] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0796] Config: added 'scan_ssid' value '1'
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0797] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0798] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:05:34 IQ138000 NetworkManager[404]: <info>  [1760148334.0799] Config: added 'psk' value '<hidden>'
Oct 11 02:05:34 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/18
Oct 11 02:05:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:37 IQ138000 NetworkManager[404]: <info>  [1760148337.1525] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:05:37 IQ138000 NetworkManager[404]: <info>  [1760148337.1527] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:05:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:05:37 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:05:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:05:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:05:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:05:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:05:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:05:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:05:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:05:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:05:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:05:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:05:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:05:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:05:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:05:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:05:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:05:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:05:37 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:05:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:05:37 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:05:37 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:05:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:05:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:05:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:05:37 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:05:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:05:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:05:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:05:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:05:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:05:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:05:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:05:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:05:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:05:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:05:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:05:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:05:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:05:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:05:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:05:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:46 IQ138000 wb-watchdog[17359]: [INFO] Interval #19 started. Waiting up to 60 seconds for error...
Oct 11 02:05:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:05:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:05:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:05:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:05:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:05:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:59 IQ138000 NetworkManager[404]: <warn>  [1760148359.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:05:59 IQ138000 NetworkManager[404]: <info>  [1760148359.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:05:59 IQ138000 NetworkManager[404]: <warn>  [1760148359.5338] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:05:59 IQ138000 NetworkManager[404]: <info>  [1760148359.5366] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:05:59 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/18
Oct 11 02:05:59 IQ138000 NetworkManager[404]: <info>  [1760148359.5793] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:05:59 IQ138000 NetworkManager[404]: <info>  [1760148359.5810] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:05 IQ138000 NetworkManager[404]: <info>  [1760148365.8087] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:06:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:07 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:06:07 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:06:07 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:06:07 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:06:07 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:06:07 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:06:07 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:06:07 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:06:07 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:06:07 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:06:07 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:06:07 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:06:07 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:06:07 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:06:07 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:06:07 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:06:07 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:06:07 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:06:07 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:06:07 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:06:07 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:06:07 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:06:07 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:06:07 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:06:07 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:06:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:06:07 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:06:07 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:06:07 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:06:07 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:06:07 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:06:07 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:06:07 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:06:07 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:06:07 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:06:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:06:13 IQ138000 ntpd[1651]: 195.218.227.230 local addr 10.34.0.171 -> <null>
Oct 11 02:06:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:06:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:06:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:06:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:06:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:06:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:06:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:06:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:06:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:06:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:06:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:06:35 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:06:35 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:06:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:06:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:37 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:06:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:06:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:06:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:06:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:06:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:06:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:06:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:06:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:06:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:06:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:06:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:06:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:06:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:06:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:06:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:06:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:06:37 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:06:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:06:37 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:06:37 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:06:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:06:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:06:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:06:37 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:06:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:06:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:06:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:06:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:06:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:06:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:06:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:06:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:06:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:06:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:06:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:06:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:46 IQ138000 wb-watchdog[18073]: [INFO] Interval #20 started. Waiting up to 60 seconds for error...
Oct 11 02:06:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:06:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:06:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:06:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:06:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:06:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:06:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:06:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:06:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0486] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0492] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0498] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0570] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0589] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0592] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0675] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0696] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0714] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0718] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0719] Config: added 'scan_ssid' value '1'
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0720] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0721] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.0722] Config: added 'psk' value '<hidden>'
Oct 11 02:07:01 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/19
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.1475] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:07:01 IQ138000 NetworkManager[404]: <info>  [1760148421.1477] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:07:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:07:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:07:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:07:07 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:07:07 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:07:07 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:07:07 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:07:07 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:07:07 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:07:07 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:07:07 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:07:07 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:07:07 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:07:07 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:07:07 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:07:07 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:07:07 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:07:07 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:07:07 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:07:07 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:07:07 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:07:07 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:07:07 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:07:07 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:07:07 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:07:07 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:07:07 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:07:07 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:07:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:07 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:07:07 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:07:08 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:07:08 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:07:08 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:07:08 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:07:08 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:07:08 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:07:08 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:07:08 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:07:08 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:07:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:07:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:26 IQ138000 NetworkManager[404]: <warn>  [1760148446.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:07:26 IQ138000 NetworkManager[404]: <info>  [1760148446.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:07:26 IQ138000 NetworkManager[404]: <warn>  [1760148446.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:07:26 IQ138000 NetworkManager[404]: <info>  [1760148446.5354] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:07:26 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:07:26 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/19
Oct 11 02:07:26 IQ138000 NetworkManager[404]: <info>  [1760148446.5814] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:07:26 IQ138000 NetworkManager[404]: <info>  [1760148446.5816] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:07:27 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:07:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:07:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:07:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:32 IQ138000 NetworkManager[404]: <info>  [1760148452.8000] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:07:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L1, row count 7183, limit 7042
Oct 11 02:07:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:38 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:07:38 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:07:38 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:07:38 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:07:38 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:07:38 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:07:38 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:07:38 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:07:38 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:07:38 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:07:38 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:07:38 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:07:38 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:07:38 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:07:38 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:07:38 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:07:38 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:07:38 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:07:38 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:07:38 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:07:38 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:07:38 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:07:38 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:07:38 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:07:38 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:07:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:07:38 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:38 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:07:38 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:07:38 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:07:38 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:07:38 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:07:38 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:07:38 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:07:38 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:07:46 IQ138000 wb-watchdog[18676]: [INFO] Interval #21 started. Waiting up to 60 seconds for error...
Oct 11 02:07:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:07:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:07:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:01 IQ138000 CRON[18974]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:08:01 IQ138000 CRON[18978]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 02:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:01 IQ138000 sSMTP[18982]: Unable to locate mail
Oct 11 02:08:01 IQ138000 sSMTP[18982]: Cannot open mail:25
Oct 11 02:08:01 IQ138000 cron[18982]: sendmail: Cannot open mail:25
Oct 11 02:08:01 IQ138000 CRON[18974]: (root) MAIL (mailed 253 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 02:08:01 IQ138000 CRON[18974]: pam_unix(cron:session): session closed for user root
Oct 11 02:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:08:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:08:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:08 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:08:08 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:08:08 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:08:08 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:08:08 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:08:08 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:08:08 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:08:08 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:08:08 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:08:08 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:08:08 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:08:08 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:08:08 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:08:08 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:08:08 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:08:08 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:08:08 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:08:08 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:08:08 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:08:08 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:08:08 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:08:08 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:08:08 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:08:08 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:08:08 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:08:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:08:08 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:08:08 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:08:08 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:08:08 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:08:08 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:08:08 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:08:08 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:08:08 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:08:08 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:08:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:08:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:08:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:08:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:08:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:08:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:08:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:08:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.1906] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.1911] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.1917] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.1973] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.1992] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.1994] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2073] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2095] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2112] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2115] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2116] Config: added 'scan_ssid' value '1'
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2117] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2118] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:08:28 IQ138000 NetworkManager[404]: <info>  [1760148508.2119] Config: added 'psk' value '<hidden>'
Oct 11 02:08:28 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/20
Oct 11 02:08:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:31 IQ138000 NetworkManager[404]: <info>  [1760148511.2988] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:08:31 IQ138000 NetworkManager[404]: <info>  [1760148511.2992] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:38 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:08:38 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:08:38 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:08:38 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:08:38 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:08:38 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:08:38 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:08:38 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:08:38 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:08:38 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:08:38 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:08:38 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:08:38 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:08:38 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:08:38 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:08:38 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:08:38 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:08:38 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:08:38 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:08:38 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:08:38 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:08:38 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:08:38 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:08:38 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:08:38 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:08:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:08:38 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:08:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:38 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:08:38 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:08:38 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:08:38 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:08:38 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:08:38 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:08:38 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:08:38 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:08:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:46 IQ138000 wb-watchdog[19400]: [INFO] Interval #22 started. Waiting up to 60 seconds for error...
Oct 11 02:08:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 02:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:08:53 IQ138000 NetworkManager[404]: <warn>  [1760148533.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:08:53 IQ138000 NetworkManager[404]: <info>  [1760148533.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:08:53 IQ138000 NetworkManager[404]: <warn>  [1760148533.5342] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:08:53 IQ138000 NetworkManager[404]: <info>  [1760148533.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:08:53 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:08:53 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/20
Oct 11 02:08:53 IQ138000 NetworkManager[404]: <info>  [1760148533.5745] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:08:53 IQ138000 NetworkManager[404]: <info>  [1760148533.5747] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:08:54 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:08:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:08:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:08:59 IQ138000 NetworkManager[404]: <info>  [1760148539.9557] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:09:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:09:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:09:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:08 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:09:08 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:09:08 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:09:08 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:09:08 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:09:08 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:09:08 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:09:08 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:09:08 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:09:08 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:09:08 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:09:08 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:09:08 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:09:08 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:09:08 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:09:08 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:09:08 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:09:08 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:09:08 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:09:08 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:09:08 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:09:08 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:09:08 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:09:08 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:09:08 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:09:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:09:08 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:09:08 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:09:08 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:09:08 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:09:08 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:09:08 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:09:08 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:09:08 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:09:08 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:09:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:09:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:09:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:09:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:09:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:09:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:09:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:09:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:38 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:09:38 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:09:38 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:09:38 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:09:38 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:09:38 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:09:38 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:09:38 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:09:38 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:09:38 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:09:38 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:09:38 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:09:38 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:09:38 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:09:38 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:09:38 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:09:38 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:09:38 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:09:38 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:09:38 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:09:38 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:09:38 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:09:38 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:09:38 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:09:38 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:09:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:09:38 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:09:38 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:09:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:39 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:09:39 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:09:39 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:09:39 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:09:39 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:09:39 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:09:39 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:09:39 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:09:39 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:09:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:09:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:09:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:46 IQ138000 wb-watchdog[20024]: [INFO] Interval #23 started. Waiting up to 60 seconds for error...
Oct 11 02:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1678] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1691] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1700] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1776] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1804] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1815] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1901] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1921] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1965] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1969] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1971] Config: added 'scan_ssid' value '1'
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1972] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1973] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:09:55 IQ138000 NetworkManager[404]: <info>  [1760148595.1974] Config: added 'psk' value '<hidden>'
Oct 11 02:09:55 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/21
Oct 11 02:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:09:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:09:57 IQ138000 NetworkManager[404]: <info>  [1760148597.2666] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:09:57 IQ138000 NetworkManager[404]: <info>  [1760148597.2668] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:09:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:09:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:09:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:09:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:09:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:09:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:09:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:09 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:10:09 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:10:09 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:10:09 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:10:09 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:10:09 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:10:09 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:10:09 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:10:09 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:10:09 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:10:09 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:10:09 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:10:09 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:10:09 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:10:09 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:10:09 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:10:09 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:10:09 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:10:09 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:10:09 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:10:09 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:10:09 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:10:09 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:10:09 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:10:09 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:10:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:10:09 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:09 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:10:09 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:10:09 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:10:09 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:10:09 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:10:09 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:10:09 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:10:09 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:10:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L2, row count 7183, limit 7042
Oct 11 02:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:20 IQ138000 NetworkManager[404]: <warn>  [1760148620.5300] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:10:20 IQ138000 NetworkManager[404]: <info>  [1760148620.5302] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:10:20 IQ138000 NetworkManager[404]: <warn>  [1760148620.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:10:20 IQ138000 NetworkManager[404]: <info>  [1760148620.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:10:20 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/21
Oct 11 02:10:20 IQ138000 NetworkManager[404]: <info>  [1760148620.5733] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:10:20 IQ138000 NetworkManager[404]: <info>  [1760148620.5735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:10:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:10:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:10:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:26 IQ138000 NetworkManager[404]: <info>  [1760148626.9927] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:10:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:10:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:10:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:10:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:10:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:39 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:10:39 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:10:39 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:10:39 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:10:39 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:10:39 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:10:39 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:10:39 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:10:39 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:10:39 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:10:39 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:10:39 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:10:39 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:10:39 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:10:39 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:10:39 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:10:39 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:10:39 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:10:39 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:10:39 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:10:39 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:10:39 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:10:39 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:10:39 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:10:39 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:10:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:10:39 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:10:39 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:10:39 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:10:39 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:10:39 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:10:39 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:10:39 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:10:39 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:10:39 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:10:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:10:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:10:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:46 IQ138000 wb-watchdog[20710]: [INFO] Interval #24 started. Waiting up to 60 seconds for error...
Oct 11 02:10:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:10:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:10:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:10:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:10:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:10:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:11:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:11:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:11:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:11:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:11:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:09 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:11:09 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:11:09 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:11:09 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:11:09 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:11:09 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:11:09 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:11:09 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:11:09 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:11:09 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:11:09 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:11:09 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:11:09 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:11:09 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:11:09 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:11:09 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:11:09 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:11:09 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:11:09 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:11:09 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:11:09 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:11:09 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:11:09 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:11:09 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:11:09 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:11:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:11:09 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:11:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:11:09 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:11:09 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:11:09 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:11:09 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:11:09 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:11:09 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:11:09 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:11:09 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:11:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:11:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:11:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:11:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:11:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:11:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:11:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:11:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2329] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2346] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2352] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2434] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2460] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2462] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2568] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2593] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2629] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2633] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2634] Config: added 'scan_ssid' value '1'
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2635] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2638] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.2639] Config: added 'psk' value '<hidden>'
Oct 11 02:11:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/22
Oct 11 02:11:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.3374] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:11:22 IQ138000 NetworkManager[404]: <info>  [1760148682.3376] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:11:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:11:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:11:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:11:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:39 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:39 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:11:39 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:11:39 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:11:39 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:11:39 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:11:39 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:11:39 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:11:39 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:11:39 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:11:39 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:11:39 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:11:39 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:11:39 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:11:39 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:11:39 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:11:39 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:11:39 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:11:39 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:11:39 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:11:39 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:11:39 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:11:39 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:11:39 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:11:39 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:11:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:11:39 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:11:39 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:11:39 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:11:39 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:11:39 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:11:39 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:11:39 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:11:39 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:11:39 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:11:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:11:46 IQ138000 wb-watchdog[21324]: [INFO] Interval #25 started. Waiting up to 60 seconds for error...
Oct 11 02:11:47 IQ138000 NetworkManager[404]: <warn>  [1760148707.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:11:47 IQ138000 NetworkManager[404]: <info>  [1760148707.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:11:47 IQ138000 NetworkManager[404]: <warn>  [1760148707.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:11:47 IQ138000 NetworkManager[404]: <info>  [1760148707.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:11:47 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/22
Oct 11 02:11:47 IQ138000 NetworkManager[404]: <info>  [1760148707.5781] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:11:47 IQ138000 NetworkManager[404]: <info>  [1760148707.5783] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:11:54 IQ138000 NetworkManager[404]: <info>  [1760148714.0045] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:11:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:11:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:11:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:11:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:12:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:12:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:09 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:12:09 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:12:09 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:12:09 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:12:09 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:12:09 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:12:09 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:12:09 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:12:09 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:12:09 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:12:09 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:12:09 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:12:09 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:12:09 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:12:09 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:12:09 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:12:09 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:12:09 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:12:09 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:12:09 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:12:09 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:12:09 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:12:09 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:12:09 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:12:09 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:12:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:09 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:12:09 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:12:10 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:12:10 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:12:10 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:12:10 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:12:10 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:12:10 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:12:10 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:12:10 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:12:10 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:12:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:12:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:12:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:12:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:12:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:12:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:12:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:12:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:12:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:40 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:12:40 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:12:40 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:12:40 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:12:40 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:12:40 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:12:40 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:12:40 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:12:40 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:12:40 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:12:40 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:12:40 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:12:40 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:12:40 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:12:40 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:12:40 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:12:40 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:12:40 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:12:40 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:12:40 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:12:40 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:12:40 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:12:40 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:12:40 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:12:40 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:12:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:12:40 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:12:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:40 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:12:40 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:12:40 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:12:40 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:12:40 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:12:40 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:12:40 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:12:40 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:12:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:46 IQ138000 wb-watchdog[22026]: [INFO] Interval #26 started. Waiting up to 60 seconds for error...
Oct 11 02:12:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1364] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1369] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1374] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1434] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1452] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1454] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1537] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1558] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1575] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1578] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1579] Config: added 'scan_ssid' value '1'
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1580] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1582] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.1582] Config: added 'psk' value '<hidden>'
Oct 11 02:12:49 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/23
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.2229] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:12:49 IQ138000 NetworkManager[404]: <info>  [1760148769.2231] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:12:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:12:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:12:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:12:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:12:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:12:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:12:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:12:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:12:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:10 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:13:10 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:13:10 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:13:10 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:13:10 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:13:10 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:13:10 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:13:10 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:13:10 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:13:10 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:13:10 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:13:10 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:13:10 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:13:10 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:13:10 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:13:10 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:13:10 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:13:10 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:13:10 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:13:10 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:13:10 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:13:10 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:13:10 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:13:10 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:13:10 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:13:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:13:10 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:13:10 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:13:10 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:13:10 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:13:10 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:13:10 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:13:10 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:13:10 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:13:10 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:13:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:13:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:13:14 IQ138000 NetworkManager[404]: <warn>  [1760148794.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:13:14 IQ138000 NetworkManager[404]: <info>  [1760148794.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:13:14 IQ138000 NetworkManager[404]: <warn>  [1760148794.5332] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:13:14 IQ138000 NetworkManager[404]: <info>  [1760148794.5347] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:13:14 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/23
Oct 11 02:13:14 IQ138000 NetworkManager[404]: <info>  [1760148794.5706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:13:14 IQ138000 NetworkManager[404]: <info>  [1760148794.5708] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:13:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:13:15 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:13:15 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:13:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:13:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:20 IQ138000 NetworkManager[404]: <info>  [1760148800.9311] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:13:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:13:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:13:40 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:13:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:13:40 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:13:40 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:13:40 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:13:40 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:13:40 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:13:40 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:13:40 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:13:40 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:13:40 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:13:40 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:13:40 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:13:40 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:13:40 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:13:40 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:13:40 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:13:40 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:13:40 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:13:40 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:13:40 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:13:40 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:13:40 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:13:40 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:13:40 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:13:40 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:13:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:13:40 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:13:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:13:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:13:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:40 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:13:40 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:13:40 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:13:40 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:13:40 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:13:40 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:13:40 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:13:40 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:13:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:13:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:13:46 IQ138000 wb-watchdog[22647]: [INFO] Interval #27 started. Waiting up to 60 seconds for error...
Oct 11 02:13:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:13:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:13:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:13:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:13:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:13:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:13:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:14:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:14:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:14:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:14:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:10 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:14:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:10 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:14:10 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:14:10 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:14:10 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:14:10 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:14:10 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:14:10 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:14:10 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:14:10 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:14:10 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:14:10 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:14:10 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:14:10 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:14:10 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:14:10 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:14:10 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:14:10 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:14:10 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:14:10 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:14:10 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:14:10 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:14:10 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:14:10 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:14:10 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:14:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:14:10 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:14:10 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:14:10 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:14:10 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:14:10 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:14:10 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:14:10 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:14:10 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:14:10 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:14:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:14:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:14:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1125] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1186] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1198] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1339] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1372] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1385] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1640] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1721] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1740] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1754] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1765] Config: added 'scan_ssid' value '1'
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1767] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1768] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.1769] Config: added 'psk' value '<hidden>'
Oct 11 02:14:16 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/24
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.2640] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:14:16 IQ138000 NetworkManager[404]: <info>  [1760148856.2642] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:14:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:14:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:14:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:22 IQ138000 ntpd[1651]: 89.109.251.22 local addr 10.34.0.171 -> <null>
Oct 11 02:14:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:14:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:14:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:40 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:14:40 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:14:40 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:14:40 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:14:40 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:14:40 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:14:40 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:14:40 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:14:40 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:14:40 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:14:40 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:14:40 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:14:40 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:14:40 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:14:40 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:14:40 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:14:40 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:14:40 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:14:40 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:14:40 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:14:40 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:14:40 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:14:40 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:14:40 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:14:40 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:14:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:14:40 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:14:40 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:14:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:14:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:14:41 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:14:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:14:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:14:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:14:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:14:41 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:14:41 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:14:41 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:14:41 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:14:41 IQ138000 NetworkManager[404]: <warn>  [1760148881.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:14:41 IQ138000 NetworkManager[404]: <info>  [1760148881.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:14:41 IQ138000 NetworkManager[404]: <warn>  [1760148881.5338] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:14:41 IQ138000 NetworkManager[404]: <info>  [1760148881.5352] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:14:41 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/24
Oct 11 02:14:41 IQ138000 NetworkManager[404]: <info>  [1760148881.5793] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:14:41 IQ138000 NetworkManager[404]: <info>  [1760148881.5795] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:14:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:14:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:14:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:46 IQ138000 wb-watchdog[23363]: [INFO] Interval #28 started. Waiting up to 60 seconds for error...
Oct 11 02:14:47 IQ138000 NetworkManager[404]: <info>  [1760148887.8735] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:14:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:14:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:14:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:14:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:14:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:14:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:14:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:14:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:02 IQ138000 CRON[23555]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:15:02 IQ138000 CRON[23562]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 02:15:02 IQ138000 CRON[23555]: pam_unix(cron:session): session closed for user root
Oct 11 02:15:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:15:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:15:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:15:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:15:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:15:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:15:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:15:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:15:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:15:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:15:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:15:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:15:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:15:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:15:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:15:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:15:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:15:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:15:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:15:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:15:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:15:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:15:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:15:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:15:11 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:15:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:15:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:15:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:15:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:15:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:15:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:15:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:15:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:15:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:15:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:15:11 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:15:11 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:15:11 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:15:11 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:15:11 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:15:11 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:15:11 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:15:11 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:15:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:15:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:15:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:15:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:15:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:15:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L2, row count 7183, limit 7042
Oct 11 02:15:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:41 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:15:41 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:15:41 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:15:41 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:15:41 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:15:41 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:15:41 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:15:41 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:15:41 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:15:41 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:15:41 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:15:41 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:15:41 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:15:41 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:15:41 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:15:41 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:15:41 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:15:41 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:15:41 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:15:41 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:15:41 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:15:41 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:15:41 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:15:41 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:15:41 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:15:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:15:41 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:15:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:15:41 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:15:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:15:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:15:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:15:41 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:15:41 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:15:41 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:15:41 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:15:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0235] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0240] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0248] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0308] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0326] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0328] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0420] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0438] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0454] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0458] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0458] Config: added 'scan_ssid' value '1'
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0459] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0460] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.0461] Config: added 'psk' value '<hidden>'
Oct 11 02:15:43 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/25
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.1202] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:15:43 IQ138000 NetworkManager[404]: <info>  [1760148943.1205] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:15:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:46 IQ138000 wb-watchdog[23963]: [INFO] Interval #29 started. Waiting up to 60 seconds for error...
Oct 11 02:15:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:15:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:15:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:15:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:15:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:15:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:15:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:15:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:16:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:16:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:08 IQ138000 NetworkManager[404]: <warn>  [1760148968.5301] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:16:08 IQ138000 NetworkManager[404]: <info>  [1760148968.5303] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:16:08 IQ138000 NetworkManager[404]: <warn>  [1760148968.5334] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:16:08 IQ138000 NetworkManager[404]: <info>  [1760148968.5348] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:16:08 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:16:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/25
Oct 11 02:16:08 IQ138000 NetworkManager[404]: <info>  [1760148968.5792] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:16:08 IQ138000 NetworkManager[404]: <info>  [1760148968.5794] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:16:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:09 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:16:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:16:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:16:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:16:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:16:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:16:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:16:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:16:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:16:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:16:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:16:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:16:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:16:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:16:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:16:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:16:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:16:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:16:11 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:16:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:16:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:16:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:16:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:16:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:16:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:16:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:16:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:16:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:16:11 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:16:11 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:16:11 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:16:11 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:16:11 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:16:11 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:16:11 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:16:11 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:16:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:16:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:14 IQ138000 NetworkManager[404]: <info>  [1760148974.7717] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:16:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:16:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:16:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:16:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12804 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:16:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:16:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:16:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:16:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:16:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:16:41 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:16:41 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:16:41 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:16:41 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:16:41 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:16:41 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:16:41 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:16:41 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:16:41 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:16:41 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:16:41 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:16:41 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:16:41 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:16:41 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:16:41 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:16:41 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:16:41 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:16:41 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:16:41 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:16:41 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:16:41 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:16:41 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:16:41 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:16:41 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:16:41 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:16:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:16:41 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:16:41 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:16:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:16:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:16:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:16:41 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:16:41 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:16:41 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:16:41 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:16:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:16:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:16:46 IQ138000 wb-watchdog[24671]: [INFO] Interval #30 started. Waiting up to 60 seconds for error...
Oct 11 02:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:16:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:16:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:16:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:16:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:16:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:16:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:16:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:01 IQ138000 CRON[24866]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:17:01 IQ138000 CRON[24870]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 02:17:01 IQ138000 CRON[24866]: pam_unix(cron:session): session closed for user root
Oct 11 02:17:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.8988] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.8994] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9001] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9054] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9070] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9071] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9195] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9219] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9236] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9239] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9241] Config: added 'scan_ssid' value '1'
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9241] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9243] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:17:09 IQ138000 NetworkManager[404]: <info>  [1760149029.9244] Config: added 'psk' value '<hidden>'
Oct 11 02:17:09 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/26
Oct 11 02:17:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:17:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:17:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:17:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:17:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:17:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:17:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:17:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:17:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:17:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:17:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:17:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:17:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:17:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:17:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:17:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:17:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:17:11 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:17:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:17:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:17:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:17:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:17:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:17:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:17:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:17:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:17:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:17:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:17:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:17:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:17:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:17:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:17:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:17:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:17:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:17:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:14 IQ138000 NetworkManager[404]: <info>  [1760149034.0063] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:17:14 IQ138000 NetworkManager[404]: <info>  [1760149034.0066] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:17:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:17:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:35 IQ138000 NetworkManager[404]: <warn>  [1760149055.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:17:35 IQ138000 NetworkManager[404]: <info>  [1760149055.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:17:35 IQ138000 NetworkManager[404]: <warn>  [1760149055.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:17:35 IQ138000 NetworkManager[404]: <info>  [1760149055.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:17:35 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/26
Oct 11 02:17:35 IQ138000 NetworkManager[404]: <info>  [1760149055.5758] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:17:35 IQ138000 NetworkManager[404]: <info>  [1760149055.5760] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:17:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:17:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:41 IQ138000 NetworkManager[404]: <info>  [1760149061.6389] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:17:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:17:42 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:17:42 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:17:42 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:17:42 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:17:42 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:17:42 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:17:42 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:17:42 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:17:42 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:17:42 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:17:42 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:17:42 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:17:42 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:17:42 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:17:42 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:17:42 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:17:42 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:17:42 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:17:42 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:17:42 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:17:42 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:17:42 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:17:42 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:17:42 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:17:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:17:42 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:17:42 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:17:42 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:17:42 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:17:42 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:17:42 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:17:42 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:17:42 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:17:42 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:17:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:17:46 IQ138000 wb-watchdog[25282]: [INFO] Interval #31 started. Waiting up to 60 seconds for error...
Oct 11 02:17:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:17:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:17:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:17:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:17:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:17:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:17:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:17:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:17:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:18:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:18:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:18:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:18:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:18:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:18:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:18:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:18:12 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:18:12 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:18:12 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:18:12 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:18:12 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:18:12 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:18:12 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:18:12 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:18:12 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:18:12 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:18:12 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:18:12 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:18:12 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:18:12 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:18:12 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:18:12 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:18:12 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:18:12 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:18:12 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:18:12 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:18:12 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:18:12 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:18:12 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:18:12 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:18:12 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:18:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:18:12 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:18:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:18:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:18:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:18:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:18:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:18:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:18:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:18:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:18:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:18:12 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:18:12 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L3, row count 7183, limit 7042
Oct 11 02:18:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:18:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:18:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:18:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:18:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:18:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.7752] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.7769] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.7776] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.7862] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.7891] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.7903] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8024] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8056] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8075] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8079] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8080] Config: added 'scan_ssid' value '1'
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8081] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8082] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8083] Config: added 'psk' value '<hidden>'
Oct 11 02:18:36 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/27
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8883] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:18:36 IQ138000 NetworkManager[404]: <info>  [1760149116.8885] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:18:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:18:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:18:42 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:18:42 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:18:42 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:18:42 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:18:42 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:18:42 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:18:42 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:18:42 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:18:42 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:18:42 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:18:42 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:18:42 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:18:42 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:18:42 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:18:42 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:18:42 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:18:42 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:18:42 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:18:42 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:18:42 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:18:42 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:18:42 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:18:42 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:18:42 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:18:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:18:42 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:18:42 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:18:42 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:18:42 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:18:42 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:18:42 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:18:42 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:18:42 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:18:42 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:18:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:18:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:18:46 IQ138000 wb-watchdog[26001]: [INFO] Interval #32 started. Waiting up to 60 seconds for error...
Oct 11 02:18:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:18:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:18:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:18:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:18:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:18:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:18:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:18:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:18:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:18:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:18:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:18:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:19:02 IQ138000 NetworkManager[404]: <warn>  [1760149142.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:19:02 IQ138000 NetworkManager[404]: <info>  [1760149142.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:19:02 IQ138000 NetworkManager[404]: <warn>  [1760149142.5338] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:19:02 IQ138000 NetworkManager[404]: <info>  [1760149142.5357] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:19:02 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/27
Oct 11 02:19:02 IQ138000 NetworkManager[404]: <info>  [1760149142.5852] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:19:02 IQ138000 NetworkManager[404]: <info>  [1760149142.5853] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:19:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:19:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:19:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:19:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:19:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:19:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:08 IQ138000 NetworkManager[404]: <info>  [1760149148.5486] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:19:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:19:12 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:19:12 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:19:12 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:19:12 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:19:12 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:19:12 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:19:12 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:19:12 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:19:12 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:19:12 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:19:12 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:19:12 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:19:12 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:19:12 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:19:12 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:19:12 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:19:12 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:19:12 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:19:12 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:19:12 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:19:12 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:19:12 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:19:12 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:19:12 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:19:12 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:19:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:19:12 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:19:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:19:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:19:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:19:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:19:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:19:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:19:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:19:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:19:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5146 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:19:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:19:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:19:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:19:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:19:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:19:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:19:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:19:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:19:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:19:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:19:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:19:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:19:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:19:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:19:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:42 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:19:42 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:19:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:19:42 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:19:42 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:19:42 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:19:42 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:19:42 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:19:42 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:19:42 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:19:42 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:19:42 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:19:42 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:19:42 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:19:42 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:19:42 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:19:42 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:19:42 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:19:42 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:19:42 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:19:42 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:19:42 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:19:42 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:19:42 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:19:42 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:19:42 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:19:42 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:19:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:19:42 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:19:42 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:19:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:19:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:19:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:19:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:19:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:19:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:19:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:19:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:19:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:19:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:19:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:47 IQ138000 wb-watchdog[26619]: [INFO] Interval #33 started. Waiting up to 60 seconds for error...
Oct 11 02:19:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:19:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:20:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:20:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.7851] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.7856] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.7861] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.7910] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.7930] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.7931] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8010] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8042] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8060] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8064] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8065] Config: added 'scan_ssid' value '1'
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8066] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8067] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8068] Config: added 'psk' value '<hidden>'
Oct 11 02:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:03 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/28
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8879] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:20:03 IQ138000 NetworkManager[404]: <info>  [1760149203.8881] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:20:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:20:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:20:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:20:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:20:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:20:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:20:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16932 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:20:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:20:13 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:20:13 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:20:13 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:20:13 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:20:13 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:20:13 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:20:13 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:20:13 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:20:13 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:20:13 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:20:13 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:20:13 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:20:13 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:20:13 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:20:13 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:20:13 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:20:13 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:20:13 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:20:13 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:20:13 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:20:13 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:20:13 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:20:13 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:20:13 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:20:13 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:20:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:20:13 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:20:13 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:20:13 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:20:13 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:20:13 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:20:13 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:20:13 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:20:13 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:20:13 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:20:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:20:13 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:20:13 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:20:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:20:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:20:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:20:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:20:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:29 IQ138000 NetworkManager[404]: <warn>  [1760149229.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:20:29 IQ138000 NetworkManager[404]: <info>  [1760149229.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:20:29 IQ138000 NetworkManager[404]: <warn>  [1760149229.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:20:29 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:20:29 IQ138000 NetworkManager[404]: <info>  [1760149229.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:20:29 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/28
Oct 11 02:20:29 IQ138000 NetworkManager[404]: <info>  [1760149229.5696] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:20:29 IQ138000 NetworkManager[404]: <info>  [1760149229.5699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:20:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:30 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:20:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:20:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:35 IQ138000 NetworkManager[404]: <info>  [1760149235.5325] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:20:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:20:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:20:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:20:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:20:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:20:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:20:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:20:43 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:20:43 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:20:43 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:20:43 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:20:43 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:20:43 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:20:43 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:20:43 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:20:43 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:20:43 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:20:43 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:20:43 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:20:43 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:20:43 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:20:43 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:20:43 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:20:43 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:20:43 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:20:43 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:20:43 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:20:43 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:20:43 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:20:43 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:20:43 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:20:43 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:20:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:20:43 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:20:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:20:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:20:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:20:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:20:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:20:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:20:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:20:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:20:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:20:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:20:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:20:46 IQ138000 wb-watchdog[27310]: [INFO] Interval #34 started. Waiting up to 60 seconds for error...
Oct 11 02:20:46 IQ138000 ntpd[1651]: 217.28.222.15 local addr 10.34.0.171 -> <null>
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:20:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:21:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:21:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:21:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:21:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:21:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:21:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:21:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:21:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:21:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:21:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:21:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:21:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:13 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:21:13 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:21:13 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:21:13 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:21:13 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:21:13 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:21:13 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:21:13 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:21:13 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:21:13 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:21:13 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:21:13 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:21:13 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:21:13 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:21:13 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:21:13 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:21:13 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:21:13 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:21:13 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:21:13 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:21:13 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:21:13 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:21:13 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:21:13 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:21:13 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:21:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:21:13 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:21:13 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:21:13 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:21:13 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:21:13 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:21:13 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:21:13 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:21:13 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:21:13 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:21:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:21:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:21:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:21:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.7888] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.7915] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.7923] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8000] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8019] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8020] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8112] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8135] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8155] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8159] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8160] Config: added 'scan_ssid' value '1'
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8161] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8163] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:21:30 IQ138000 NetworkManager[404]: <info>  [1760149290.8164] Config: added 'psk' value '<hidden>'
Oct 11 02:21:30 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/29
Oct 11 02:21:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:21:32 IQ138000 NetworkManager[404]: <info>  [1760149292.9171] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:21:32 IQ138000 NetworkManager[404]: <info>  [1760149292.9173] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:21:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:21:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:21:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:43 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:21:43 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:21:43 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:21:43 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:21:43 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:21:43 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:21:43 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:21:43 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:21:43 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:21:43 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:21:43 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:21:43 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:21:43 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:21:43 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:21:43 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:21:43 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:21:43 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:21:43 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:21:43 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:21:43 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:21:43 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:21:43 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:21:43 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:21:43 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:21:43 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:21:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:21:43 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:21:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:21:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:21:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:21:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:21:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:21:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:21:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:21:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:21:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:21:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:46 IQ138000 wb-watchdog[27925]: [INFO] Interval #35 started. Waiting up to 60 seconds for error...
Oct 11 02:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:21:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:56 IQ138000 NetworkManager[404]: <warn>  [1760149316.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:21:56 IQ138000 NetworkManager[404]: <info>  [1760149316.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:21:56 IQ138000 NetworkManager[404]: <warn>  [1760149316.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:21:56 IQ138000 NetworkManager[404]: <info>  [1760149316.5359] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:21:56 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/29
Oct 11 02:21:56 IQ138000 NetworkManager[404]: <info>  [1760149316.5825] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:21:56 IQ138000 NetworkManager[404]: <info>  [1760149316.5835] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:21:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:21:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:21:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:22:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:02 IQ138000 NetworkManager[404]: <info>  [1760149322.5335] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:22:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:22:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:22:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:22:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:22:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:22:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:22:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:13 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:22:13 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:22:13 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:22:13 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:22:13 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:22:13 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:22:13 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:22:13 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:22:13 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:22:13 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:22:13 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:22:13 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:22:13 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:22:13 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:22:13 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:22:13 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:22:13 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:22:13 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:22:13 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:22:13 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:22:13 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:22:13 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:22:13 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:22:13 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:22:13 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:22:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:13 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:22:13 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:22:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:22:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:22:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:22:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:22:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:22:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:22:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:22:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:22:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:22:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:22:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:22:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:22:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:22:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:22:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:22:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:22:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:44 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:44 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:22:44 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:22:44 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:22:44 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:22:44 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:22:44 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:22:44 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:22:44 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:22:44 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:22:44 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:22:44 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:22:44 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:22:44 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:22:44 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:22:44 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:22:44 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:22:44 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:22:44 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:22:44 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:22:44 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:22:44 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:22:44 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:22:44 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:22:44 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:22:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:22:44 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:22:44 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:22:44 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:22:44 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:22:44 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:22:44 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:22:44 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:22:44 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:22:44 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:46 IQ138000 wb-watchdog[28620]: [INFO] Interval #36 started. Waiting up to 60 seconds for error...
Oct 11 02:22:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:22:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:22:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:22:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:22:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7371] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7383] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7399] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7479] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7508] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7509] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7606] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7626] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7645] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7648] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7650] Config: added 'scan_ssid' value '1'
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7651] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7652] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.7653] Config: added 'psk' value '<hidden>'
Oct 11 02:22:57 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/30
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.8395] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:22:57 IQ138000 NetworkManager[404]: <info>  [1760149377.8397] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:22:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:22:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:23:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:23:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:23:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:23:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:23:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:23:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:23:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:23:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:23:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:23:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:23:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:23:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:23:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:23:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:23:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:23:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:23:14 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:23:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:23:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:23:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:23:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:23:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:23:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:23:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:23:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:23:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:23:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:23:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:23:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:23:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:23:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:23:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:23:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:23:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:23:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17156 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:23:22 IQ138000 NetworkManager[404]: <warn>  [1760149402.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:23:22 IQ138000 NetworkManager[404]: <info>  [1760149402.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:23:22 IQ138000 NetworkManager[404]: <warn>  [1760149402.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:23:22 IQ138000 NetworkManager[404]: <info>  [1760149402.5354] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:23:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/30
Oct 11 02:23:22 IQ138000 NetworkManager[404]: <info>  [1760149402.5800] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:23:22 IQ138000 NetworkManager[404]: <info>  [1760149402.5802] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:28 IQ138000 NetworkManager[404]: <info>  [1760149408.4933] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:23:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:23:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:23:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:23:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:23:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:23:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:23:44 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:23:44 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:23:44 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:23:44 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:23:44 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:23:44 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:23:44 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:23:44 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:23:44 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:23:44 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:23:44 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:23:44 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:23:44 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:23:44 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:23:44 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:23:44 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:23:44 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:23:44 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:23:44 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:23:44 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:23:44 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:23:44 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:23:44 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:23:44 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:23:44 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:23:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:23:44 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:23:44 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:23:44 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:23:44 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:23:44 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:23:44 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:23:44 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:23:44 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:23:44 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:23:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:46 IQ138000 wb-watchdog[29237]: [INFO] Interval #37 started. Waiting up to 60 seconds for error...
Oct 11 02:23:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:23:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:24:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:24:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:24:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:24:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:24:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:24:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:24:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:24:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:24:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:24:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:24:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:24:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:24:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:24:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:24:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:24:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:24:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:24:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:24:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:24:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:24:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:24:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:24:14 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:24:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:24:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:24:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:24:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:24:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:24:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:24:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:24:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:24:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:24:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:24:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:24:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:24:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:24:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:24:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:24:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:24:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:24:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:24:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:24:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:24:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:24:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:24:22 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:24:22 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:24:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9000] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9005] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9019] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9150] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9207] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9209] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9326] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9359] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9381] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9387] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9393] Config: added 'scan_ssid' value '1'
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9397] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9399] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:24:23 IQ138000 NetworkManager[404]: <info>  [1760149463.9402] Config: added 'psk' value '<hidden>'
Oct 11 02:24:23 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/31
Oct 11 02:24:24 IQ138000 NetworkManager[404]: <info>  [1760149464.0101] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:24:24 IQ138000 NetworkManager[404]: <info>  [1760149464.0103] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:24:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:24:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:24:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:24:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:24:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:24:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:24:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:24:44 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:24:44 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:24:44 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:24:44 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:24:44 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:24:44 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:24:44 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:24:44 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:24:44 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:24:44 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:24:44 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:24:44 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:24:44 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:24:44 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:24:44 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:24:44 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:24:44 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:24:44 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:24:44 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:24:44 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:24:44 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:24:44 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:24:44 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:24:44 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:24:44 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:24:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:24:44 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:24:44 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:24:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:45 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:24:45 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:24:45 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:24:45 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:24:45 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:24:45 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:24:45 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:24:45 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:24:45 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:24:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:46 IQ138000 wb-watchdog[29958]: [INFO] Interval #38 started. Waiting up to 60 seconds for error...
Oct 11 02:24:49 IQ138000 NetworkManager[404]: <warn>  [1760149489.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:24:49 IQ138000 NetworkManager[404]: <info>  [1760149489.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:24:49 IQ138000 NetworkManager[404]: <warn>  [1760149489.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:24:49 IQ138000 NetworkManager[404]: <info>  [1760149489.5355] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:24:49 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:24:49 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/31
Oct 11 02:24:49 IQ138000 NetworkManager[404]: <info>  [1760149489.5785] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:24:49 IQ138000 NetworkManager[404]: <info>  [1760149489.5787] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:24:50 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:51 IQ138000 npm[3714]: [2025-10-11 02:24:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.11,"last_seen":1760149491194,"linkquality":76,"power_outage_count":48745,"temperature":24.79,"voltage":3025}'
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:24:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:24:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:24:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:24:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:24:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:24:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:24:55 IQ138000 NetworkManager[404]: <info>  [1760149495.8535] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:24:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:24:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:01 IQ138000 CRON[30149]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:25:01 IQ138000 CRON[30153]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 02:25:01 IQ138000 CRON[30149]: pam_unix(cron:session): session closed for user root
Oct 11 02:25:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:25:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:25:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:25:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 02:25:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:25:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 02:25:09 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 02:25:09 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 02:25:09 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 02:25:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:25:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:15 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:25:15 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:25:15 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:25:15 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:25:15 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:25:15 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:25:15 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:25:15 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:25:15 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:25:15 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:25:15 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:25:15 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:25:15 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:25:15 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:25:15 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:25:15 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:25:15 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:25:15 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:25:15 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:25:15 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:25:15 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:25:15 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:25:15 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:25:15 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:25:15 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:25:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:25:15 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:25:15 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:25:15 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:25:15 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:25:15 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:25:15 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:25:15 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:25:15 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:25:15 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:25:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:25:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:25:23 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:25:23 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:25:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:25:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:25:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:25:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:25:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L2, row count 7183, limit 7042
Oct 11 02:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:45 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:25:45 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:25:45 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:25:45 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:25:45 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:25:45 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:25:45 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:25:45 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:25:45 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:25:45 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:25:45 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:25:45 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:25:45 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:25:45 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:25:45 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:25:45 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:25:45 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:25:45 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:25:45 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:25:45 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:25:45 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:25:45 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:25:45 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:25:45 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:25:45 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:25:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:25:45 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:25:45 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:25:45 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:25:45 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:25:45 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:25:45 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:25:45 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:25:45 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:25:45 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:25:46 IQ138000 wb-watchdog[30564]: [INFO] Interval #39 started. Waiting up to 60 seconds for error...
Oct 11 02:25:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3431] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3456] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3464] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3583] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3608] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3611] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3746] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3764] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3780] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3783] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3784] Config: added 'scan_ssid' value '1'
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3785] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3786] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:25:51 IQ138000 NetworkManager[404]: <info>  [1760149551.3787] Config: added 'psk' value '<hidden>'
Oct 11 02:25:51 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/32
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:25:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:25:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:25:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:25:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:25:54 IQ138000 NetworkManager[404]: <info>  [1760149554.4687] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:25:54 IQ138000 NetworkManager[404]: <info>  [1760149554.4689] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:26:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:26:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:26:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:26:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:26:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:26:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:26:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:26:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:26:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:26:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:26:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:26:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:26:15 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:26:15 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:26:15 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:26:15 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:26:15 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:26:15 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:26:15 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:26:15 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:26:15 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:26:15 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:26:15 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:26:15 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:26:15 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:26:15 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:26:15 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:26:15 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:26:15 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:26:15 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:26:15 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:26:15 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:26:15 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:26:15 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:26:15 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:26:15 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:26:15 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:26:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:26:15 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:26:15 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:26:15 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:26:15 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:26:15 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:26:15 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:26:15 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:26:15 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:26:15 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:26:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:26:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:26:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:26:16 IQ138000 NetworkManager[404]: <warn>  [1760149576.5301] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:26:16 IQ138000 NetworkManager[404]: <info>  [1760149576.5303] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:26:16 IQ138000 NetworkManager[404]: <warn>  [1760149576.5329] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:26:16 IQ138000 NetworkManager[404]: <info>  [1760149576.5341] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:26:16 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/32
Oct 11 02:26:16 IQ138000 NetworkManager[404]: <info>  [1760149576.5756] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:26:16 IQ138000 NetworkManager[404]: <info>  [1760149576.5758] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:26:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:26:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:26:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:26:22 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:26:22 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:26:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:23 IQ138000 NetworkManager[404]: <info>  [1760149583.0903] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:26:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:26:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:26:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:26:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:26:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:26:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:45 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:26:45 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:26:45 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:26:45 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:26:45 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:26:45 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:26:45 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:26:45 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:26:45 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:26:45 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:26:45 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:26:45 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:26:45 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:26:45 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:26:45 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:26:45 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:26:45 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:26:45 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:26:45 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:26:45 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:26:45 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:26:45 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:26:45 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:26:45 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:26:45 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:26:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:26:45 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:26:45 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:26:45 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:26:45 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:26:45 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:26:45 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:26:45 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:26:45 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:26:45 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:26:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:46 IQ138000 wb-watchdog[31273]: [INFO] Interval #40 started. Waiting up to 60 seconds for error...
Oct 11 02:26:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:26:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:27:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:27:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:27:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:27:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:27:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:27:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:27:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:15 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:27:15 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:27:15 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:27:15 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:27:15 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:27:15 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:27:15 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:27:15 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:27:15 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:27:15 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:27:15 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:27:15 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:27:15 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:27:15 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:27:15 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:27:15 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:27:15 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:27:15 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:27:15 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:27:15 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:27:15 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:27:15 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:27:15 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:27:15 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:27:15 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:27:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:15 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:27:15 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:27:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:16 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:27:16 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:27:16 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:27:16 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:27:16 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:27:16 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:27:16 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:27:16 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:27:16 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:27:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.3965] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.3970] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.3975] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4037] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4066] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4068] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4161] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4187] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4211] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4214] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4216] Config: added 'scan_ssid' value '1'
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4217] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4218] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4219] Config: added 'psk' value '<hidden>'
Oct 11 02:27:18 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/33
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4925] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:27:18 IQ138000 NetworkManager[404]: <info>  [1760149638.4930] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:27:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:27:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:27:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:27:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:27:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:27:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:27:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:27:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L3, row count 7183, limit 7042
Oct 11 02:27:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:27:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:43 IQ138000 NetworkManager[404]: <warn>  [1760149663.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:27:43 IQ138000 NetworkManager[404]: <info>  [1760149663.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:27:43 IQ138000 NetworkManager[404]: <warn>  [1760149663.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:27:43 IQ138000 NetworkManager[404]: <info>  [1760149663.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:27:43 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/33
Oct 11 02:27:43 IQ138000 NetworkManager[404]: <info>  [1760149663.5704] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:27:43 IQ138000 NetworkManager[404]: <info>  [1760149663.5705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:27:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:27:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:46 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:27:46 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:27:46 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:27:46 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:27:46 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:27:46 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:27:46 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:27:46 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:27:46 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:27:46 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:27:46 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:27:46 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:27:46 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:27:46 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:27:46 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:27:46 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:27:46 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:27:46 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:27:46 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:27:46 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:27:46 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:27:46 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:27:46 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:27:46 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:27:46 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:27:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:27:46 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:27:46 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:27:46 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:27:46 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:27:46 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:27:46 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:27:46 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:27:46 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:27:46 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:27:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:27:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:27:46 IQ138000 wb-watchdog[31875]: [INFO] Interval #41 started. Waiting up to 60 seconds for error...
Oct 11 02:27:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:27:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:27:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:27:49 IQ138000 NetworkManager[404]: <info>  [1760149669.1711] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:27:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:27:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:27:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:27:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17170 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:27:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:27:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:27:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:27:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:27:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:28:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:28:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:28:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:28:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:28:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:28:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:16 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:28:16 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:28:16 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:28:16 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:28:16 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:28:16 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:28:16 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:28:16 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:28:16 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:28:16 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:28:16 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:28:16 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:28:16 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:28:16 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:28:16 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:28:16 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:28:16 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:28:16 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:28:16 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:28:16 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:28:16 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:28:16 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:28:16 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:28:16 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:28:16 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:28:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:28:16 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:28:16 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:28:16 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:28:16 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:28:16 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:28:16 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:28:16 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:28:16 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:28:16 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:28:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L3, row count 7183, limit 7042
Oct 11 02:28:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:28:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:28:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:28:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:22 IQ138000 npm[3714]: [2025-10-11 02:28:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.12,"last_seen":1760149702646,"linkquality":47,"power_outage_count":25795,"pressure":992.7,"temperature":21.22,"voltage":3005}'
Oct 11 02:28:22 IQ138000 npm[3714]: [2025-10-11 02:28:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.32,"last_seen":1760149702670,"linkquality":47,"power_outage_count":25795,"pressure":992.7,"temperature":21.22,"voltage":3005}'
Oct 11 02:28:22 IQ138000 npm[3714]: [2025-10-11 02:28:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.32,"last_seen":1760149702670,"linkquality":47,"power_outage_count":25795,"pressure":993.4,"temperature":21.22,"voltage":3005}'
Oct 11 02:28:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:22 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:28:22 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:28:22 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:28:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:28:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:28:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:28:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:28:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:28:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:28:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:28:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:28:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:28:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:28:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:28:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:28:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:28:41 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:28:41 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.3915] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.3935] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.3955] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4011] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4028] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4030] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4127] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4145] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4163] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4167] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4169] Config: added 'scan_ssid' value '1'
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4170] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4171] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4172] Config: added 'psk' value '<hidden>'
Oct 11 02:28:44 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/34
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4861] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:28:44 IQ138000 NetworkManager[404]: <info>  [1760149724.4863] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:28:46 IQ138000 wb-watchdog[32577]: [INFO] Interval #42 started. Waiting up to 60 seconds for error...
Oct 11 02:28:46 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:28:46 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:28:46 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:28:46 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:28:46 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:28:46 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:28:46 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:28:46 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:28:46 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:28:46 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:28:46 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:28:46 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:28:46 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:28:46 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:28:46 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:28:46 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:28:46 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:28:46 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:28:46 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:28:46 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:28:46 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:28:46 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:28:46 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:28:46 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:28:46 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:28:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:28:46 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:28:46 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:28:46 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:28:46 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:28:46 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:28:46 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:28:46 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:28:46 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:28:46 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:28:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:28:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:28:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:28:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:28:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:28:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:09 IQ138000 NetworkManager[404]: <warn>  [1760149749.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:29:09 IQ138000 NetworkManager[404]: <info>  [1760149749.5313] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:29:09 IQ138000 NetworkManager[404]: <warn>  [1760149749.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:29:09 IQ138000 NetworkManager[404]: <info>  [1760149749.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:29:09 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/34
Oct 11 02:29:09 IQ138000 NetworkManager[404]: <info>  [1760149749.5758] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:29:09 IQ138000 NetworkManager[404]: <info>  [1760149749.5760] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:29:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:29:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:29:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:15 IQ138000 NetworkManager[404]: <info>  [1760149755.1971] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:29:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:29:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:16 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:29:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:29:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:29:16 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:29:16 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:29:16 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:29:16 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:29:16 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:29:16 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:29:16 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:29:16 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:29:16 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:29:16 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:29:16 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:29:16 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:29:16 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:29:16 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:29:16 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:29:16 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:29:16 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:29:16 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:29:16 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:29:16 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:29:16 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:29:16 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:29:16 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:29:16 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:29:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:29:16 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:29:16 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:29:16 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:29:16 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:29:16 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:29:16 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:29:16 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:29:16 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:29:16 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:29:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:29:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:29:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:29:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:29:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:29:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:29:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:29:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L3, row count 7183, limit 7042
Oct 11 02:29:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:46 IQ138000 wb-watchdog[748]: [INFO] Interval #43 started. Waiting up to 60 seconds for error...
Oct 11 02:29:46 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:29:46 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:29:46 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:29:46 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:29:46 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:29:46 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:29:46 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:29:46 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:29:46 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:29:46 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:29:46 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:29:46 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:29:46 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:29:46 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:29:46 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:29:46 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:29:46 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:29:46 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:29:46 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:29:46 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:29:46 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:29:46 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:29:46 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:29:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:46 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:29:46 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:29:47 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:29:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:29:47 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:29:47 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:29:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:29:47 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:29:47 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:29:47 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:29:47 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:29:47 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:29:47 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:29:47 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:29:47 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:29:47 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:29:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:29:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:29:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:29:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:29:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:29:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:29:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:29:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:29:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:29:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:29:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3323] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3334] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3340] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3392] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3409] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3411] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3495] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3516] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3532] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3535] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3536] Config: added 'scan_ssid' value '1'
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3537] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3539] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.3539] Config: added 'psk' value '<hidden>'
Oct 11 02:30:10 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/35
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.4238] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:30:10 IQ138000 NetworkManager[404]: <info>  [1760149810.4243] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:30:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:30:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:30:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:30:17 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:30:17 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:30:17 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:30:17 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:30:17 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:30:17 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:30:17 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:30:17 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:30:17 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:30:17 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:30:17 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:30:17 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:30:17 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:30:17 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:30:17 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:30:17 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:30:17 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:30:17 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:30:17 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:30:17 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:30:17 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:30:17 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:30:17 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:30:17 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:30:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:30:17 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:30:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:30:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:30:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:30:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:30:17 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:30:17 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:30:17 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:30:17 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:30:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:30:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:30:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:30:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:30:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:30:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:30:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:30:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:34 IQ138000 npm[3714]: [2025-10-11 02:30:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.32,"last_seen":1760149834310,"linkquality":47,"power_outage_count":25795,"pressure":993.4,"temperature":21.27,"voltage":3005}'
Oct 11 02:30:34 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:30:34 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:30:35 IQ138000 NetworkManager[404]: <warn>  [1760149835.5298] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:30:35 IQ138000 NetworkManager[404]: <info>  [1760149835.5300] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:30:35 IQ138000 NetworkManager[404]: <warn>  [1760149835.5327] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:30:35 IQ138000 NetworkManager[404]: <info>  [1760149835.5341] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:30:35 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/35
Oct 11 02:30:35 IQ138000 NetworkManager[404]: <info>  [1760149835.5785] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:30:35 IQ138000 NetworkManager[404]: <info>  [1760149835.5800] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:30:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:42 IQ138000 NetworkManager[404]: <info>  [1760149842.1163] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:30:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:30:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:30:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:30:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:30:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:30:46 IQ138000 wb-watchdog[1454]: [INFO] Interval #44 started. Waiting up to 60 seconds for error...
Oct 11 02:30:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:47 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:30:47 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:30:47 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:30:47 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:30:47 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:30:47 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:30:47 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:30:47 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:30:47 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:30:47 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:30:47 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:30:47 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:30:47 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:30:47 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:30:47 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:30:47 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:30:47 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:30:47 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:30:47 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:30:47 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:30:47 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:30:47 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:30:47 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:30:47 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:30:47 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:30:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:30:47 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:30:47 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:30:47 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:30:47 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:30:47 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:30:47 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:30:47 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:30:47 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:30:47 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:30:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:30:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:30:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:30:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:30:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:30:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:31:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:31:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:31:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:31:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:31:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:31:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:31:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:31:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:31:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:31:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:31:17 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:31:17 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:31:17 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:31:17 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:31:17 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:31:17 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:31:17 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:31:17 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:31:17 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:31:17 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:31:17 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:31:17 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:31:17 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:31:17 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:31:17 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:31:17 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:31:17 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:31:17 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:31:17 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:31:17 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:31:17 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:31:17 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:31:17 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:31:17 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:31:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:31:17 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:31:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:31:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:31:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:31:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:31:17 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:31:17 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:31:17 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:31:17 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:31:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:31:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:31:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:31:28 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:31:28 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:31:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:31:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:31:37 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:31:37 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2325] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2330] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2335] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2394] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2414] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2416] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2515] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2552] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2626] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2641] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2649] Config: added 'scan_ssid' value '1'
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2656] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2662] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.2669] Config: added 'psk' value '<hidden>'
Oct 11 02:31:37 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/36
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.3397] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:31:37 IQ138000 NetworkManager[404]: <info>  [1760149897.3399] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:31:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:46 IQ138000 wb-watchdog[2115]: [INFO] Interval #45 started. Waiting up to 60 seconds for error...
Oct 11 02:31:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:47 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:31:47 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:31:47 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:31:47 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:31:47 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:31:47 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:31:47 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:31:47 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:31:47 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:31:47 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:31:47 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:31:47 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:31:47 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:31:47 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:31:47 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:31:47 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:31:47 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:31:47 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:31:47 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:31:47 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:31:47 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:31:47 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:31:47 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:31:47 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:31:47 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:31:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:31:47 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:31:47 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:31:47 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:31:47 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:31:47 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:31:47 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:31:47 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:31:47 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:31:47 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:31:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:31:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:31:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:32:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:02 IQ138000 NetworkManager[404]: <warn>  [1760149922.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:32:02 IQ138000 NetworkManager[404]: <info>  [1760149922.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:32:02 IQ138000 NetworkManager[404]: <warn>  [1760149922.5335] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:32:02 IQ138000 NetworkManager[404]: <info>  [1760149922.5349] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:32:02 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/36
Oct 11 02:32:02 IQ138000 NetworkManager[404]: <info>  [1760149922.5749] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:32:02 IQ138000 NetworkManager[404]: <info>  [1760149922.5751] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:32:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:09 IQ138000 NetworkManager[404]: <info>  [1760149929.0251] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:32:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:32:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:32:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:32:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:32:18 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:32:18 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:32:18 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:32:18 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:32:18 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:32:18 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:32:18 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:32:18 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:32:18 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:32:18 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:32:18 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:32:18 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:32:18 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:32:18 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:32:18 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:32:18 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:32:18 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:32:18 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:32:18 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:32:18 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:32:18 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:32:18 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:32:18 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:32:18 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:32:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:32:18 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:32:18 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:32:18 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:32:18 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:32:18 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:32:18 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:32:18 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:32:18 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:32:18 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:32:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:32:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:32:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:32:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:32:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:32:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:32:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4616 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:47 IQ138000 wb-watchdog[2849]: [INFO] Interval #46 started. Waiting up to 60 seconds for error...
Oct 11 02:32:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:32:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:32:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:32:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:32:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:32:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:32:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:32:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:32:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:32:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:32:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:32:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:32:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:32:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:32:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:32:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:32:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:32:48 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:32:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:32:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:32:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:32:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:32:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:32:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:32:48 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:32:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:32:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:32:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:32:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:32:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:32:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:32:48 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:32:48 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:32:48 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:32:48 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:32:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:32:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:32:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:32:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:32:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:32:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:32:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:32:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:32:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:33:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2329] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2333] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2339] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2384] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2466] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2468] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2695] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2717] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2736] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2739] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2741] Config: added 'scan_ssid' value '1'
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2741] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2743] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.2744] Config: added 'psk' value '<hidden>'
Oct 11 02:33:04 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/37
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.3779] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:33:04 IQ138000 NetworkManager[404]: <info>  [1760149984.3781] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:33:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:33:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:18 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:33:18 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:33:18 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:33:18 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:33:18 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:33:18 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:33:18 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:33:18 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:33:18 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:33:18 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:33:18 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:33:18 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:33:18 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:33:18 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:33:18 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:33:18 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:33:18 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:33:18 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:33:18 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:33:18 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:33:18 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:33:18 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:33:18 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:33:18 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:33:18 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:33:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:33:18 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:33:18 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:33:18 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:33:18 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:33:18 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:33:18 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:33:18 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:33:18 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:33:18 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:33:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:33:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:33:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:33:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:33:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:33:29 IQ138000 NetworkManager[404]: <warn>  [1760150009.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:33:29 IQ138000 NetworkManager[404]: <info>  [1760150009.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:33:29 IQ138000 NetworkManager[404]: <warn>  [1760150009.5342] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:33:29 IQ138000 NetworkManager[404]: <info>  [1760150009.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:33:29 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/37
Oct 11 02:33:29 IQ138000 NetworkManager[404]: <info>  [1760150009.5802] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:33:29 IQ138000 NetworkManager[404]: <info>  [1760150009.5807] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:33:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:33:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:33:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:33:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L2, row count 7183, limit 7042
Oct 11 02:33:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:36 IQ138000 NetworkManager[404]: <info>  [1760150016.0181] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:33:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:33:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:33:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:33:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:33:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:33:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:33:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:47 IQ138000 wb-watchdog[3490]: [INFO] Interval #47 started. Waiting up to 60 seconds for error...
Oct 11 02:33:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:33:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:33:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:33:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:33:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:33:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:33:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:33:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:33:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:33:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:33:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:33:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:33:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:33:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:33:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:33:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:33:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:33:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:33:48 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:33:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:33:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:33:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:33:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:33:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:33:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:33:48 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:33:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:33:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:33:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:33:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:33:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:33:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:33:48 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:33:48 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:33:48 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:33:48 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:33:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:33:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:33:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:33:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:34:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:34:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:34:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:34:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:34:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:34:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:34:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:18 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:34:18 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:34:18 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:34:18 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:34:18 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:34:18 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:34:18 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:34:18 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:34:18 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:34:18 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:34:18 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:34:18 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:34:18 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:34:18 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:34:18 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:34:18 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:34:18 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:34:18 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:34:18 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:34:18 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:34:18 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:34:18 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:34:18 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:34:18 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:34:18 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:34:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:34:18 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:34:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:18 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:34:18 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:34:18 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:34:18 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:34:18 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:34:18 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:34:18 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:34:18 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:34:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:34:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:34:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:34:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2291] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2296] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2301] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2365] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2401] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2403] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2488] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2509] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2525] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2528] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2529] Config: added 'scan_ssid' value '1'
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2529] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2531] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.2531] Config: added 'psk' value '<hidden>'
Oct 11 02:34:31 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/38
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.3218] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:34:31 IQ138000 NetworkManager[404]: <info>  [1760150071.3220] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:34:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:34:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:34:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:34:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:47 IQ138000 wb-watchdog[4213]: [INFO] Interval #48 started. Waiting up to 60 seconds for error...
Oct 11 02:34:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:34:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:34:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:34:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:34:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:34:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:34:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:34:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:34:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:34:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:34:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:34:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:34:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:34:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:34:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:34:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:34:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:34:48 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:34:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:34:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:34:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:34:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:34:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:34:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:34:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:34:49 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:34:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:34:49 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:34:49 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:34:49 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:34:49 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:34:49 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:34:49 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:34:49 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:34:49 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:34:49 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:34:49 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:34:49 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:34:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:56 IQ138000 NetworkManager[404]: <warn>  [1760150096.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:34:56 IQ138000 NetworkManager[404]: <info>  [1760150096.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:34:56 IQ138000 NetworkManager[404]: <warn>  [1760150096.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:34:56 IQ138000 NetworkManager[404]: <info>  [1760150096.5349] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:34:56 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/38
Oct 11 02:34:56 IQ138000 NetworkManager[404]: <info>  [1760150096.5747] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:34:56 IQ138000 NetworkManager[404]: <info>  [1760150096.5755] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:34:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:34:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:34:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:35:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:01 IQ138000 CRON[4412]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:35:01 IQ138000 CRON[4416]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 02:35:01 IQ138000 CRON[4412]: pam_unix(cron:session): session closed for user root
Oct 11 02:35:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:02 IQ138000 NetworkManager[404]: <info>  [1760150102.9861] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:35:03 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:35:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:35:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:35:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:35:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:35:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:35:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:35:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:35:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:35:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:35:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:35:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:35:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:35:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:35:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:35:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:35:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:35:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:35:19 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:35:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:35:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:35:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:35:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:35:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:35:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:35:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:35:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:35:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:35:19 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:35:19 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:35:19 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:35:19 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:35:19 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:35:19 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:35:19 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:35:19 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:35:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:35:47 IQ138000 wb-watchdog[4857]: [INFO] Interval #49 started. Waiting up to 60 seconds for error...
Oct 11 02:35:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:35:49 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:35:49 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:35:49 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:35:49 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:35:49 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:35:49 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:35:49 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:35:49 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:35:49 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:35:49 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:35:49 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:35:49 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:35:49 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:35:49 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:35:49 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:35:49 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:35:49 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:35:49 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:35:49 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:35:49 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:35:49 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:35:49 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:35:49 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:35:49 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:35:49 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:35:49 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:35:49 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:35:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:35:49 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:35:49 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:35:49 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:35:49 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:35:49 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:35:49 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:35:49 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:35:49 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:35:49 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:35:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:35:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:35:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:35:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:35:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1401] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1406] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1412] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1462] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1491] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1493] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1581] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1602] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1620] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1623] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1624] Config: added 'scan_ssid' value '1'
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1625] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1626] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.1627] Config: added 'psk' value '<hidden>'
Oct 11 02:35:58 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/39
Oct 11 02:35:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.2280] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:35:58 IQ138000 NetworkManager[404]: <info>  [1760150158.2283] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:35:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:35:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:36:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:36:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:36:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:36:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:36:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:36:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:36:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:36:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:36:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:36:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:36:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:36:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:36:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:36:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:36:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:36:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:36:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:36:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:36:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:36:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:36:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:36:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:36:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:36:19 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:36:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:36:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:36:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:36:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:36:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:36:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:36:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:36:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:36:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:36:19 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:36:19 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:36:19 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:36:19 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:36:19 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:36:19 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:36:19 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:36:19 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:36:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:36:19 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:36:19 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:36:23 IQ138000 NetworkManager[404]: <warn>  [1760150183.5303] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:36:23 IQ138000 NetworkManager[404]: <info>  [1760150183.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:36:23 IQ138000 NetworkManager[404]: <warn>  [1760150183.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:36:23 IQ138000 NetworkManager[404]: <info>  [1760150183.5352] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:36:23 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:36:23 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/39
Oct 11 02:36:23 IQ138000 NetworkManager[404]: <info>  [1760150183.5709] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:36:23 IQ138000 NetworkManager[404]: <info>  [1760150183.5711] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:36:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:24 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:36:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:36:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12808 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:36:29 IQ138000 NetworkManager[404]: <info>  [1760150189.9117] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:36:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:36:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:36:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:36:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:36:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:36:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:36:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:36:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:36:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:45 IQ138000 npm[3714]: [2025-10-11 02:36:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":47.12,"last_seen":1760150205798,"linkquality":43,"power_outage_count":35250,"temperature":23.04,"voltage":3075}'
Oct 11 02:36:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-watchdog[5579]: [INFO] Interval #50 started. Waiting up to 60 seconds for error...
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:36:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:49 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:36:49 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:36:49 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:36:49 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:36:49 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:36:49 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:36:49 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:36:49 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:36:49 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:36:49 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:36:49 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:36:49 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:36:49 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:36:49 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:36:49 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:36:49 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:36:49 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:36:49 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:36:49 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:36:49 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:36:49 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:36:49 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:36:49 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:36:49 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:36:49 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:36:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:36:49 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:36:49 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:36:49 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:36:49 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:36:49 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:36:49 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:36:49 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:36:49 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:36:49 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:36:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:36:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:37:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:37:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:37:20 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:37:20 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:37:20 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:37:20 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:37:20 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:37:20 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:37:20 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:37:20 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:37:20 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:37:20 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:37:20 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:37:20 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:37:20 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:37:20 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:37:20 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:37:20 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:37:20 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:37:20 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:37:20 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:37:20 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:37:20 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:37:20 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:37:20 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:37:20 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:37:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:37:20 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:37:20 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:37:20 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:37:20 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:37:20 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:37:20 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:37:20 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:37:20 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:37:20 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:37:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1279] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1284] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1291] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1366] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1404] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1408] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1499] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1521] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1551] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1554] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1555] Config: added 'scan_ssid' value '1'
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1556] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1557] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:37:25 IQ138000 NetworkManager[404]: <info>  [1760150245.1558] Config: added 'psk' value '<hidden>'
Oct 11 02:37:25 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/40
Oct 11 02:37:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:37:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:37:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:27 IQ138000 NetworkManager[404]: <info>  [1760150247.2247] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:37:27 IQ138000 NetworkManager[404]: <info>  [1760150247.2258] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:37:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:37:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:37:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:37:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:37:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:37:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:37:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:47 IQ138000 wb-watchdog[6209]: [INFO] Interval #51 started. Waiting up to 60 seconds for error...
Oct 11 02:37:50 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:37:50 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:37:50 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:37:50 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:37:50 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:37:50 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:37:50 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:37:50 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:37:50 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:37:50 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:37:50 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:37:50 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:37:50 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:37:50 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:37:50 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:37:50 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:37:50 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:37:50 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:37:50 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:37:50 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:37:50 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:37:50 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:37:50 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:37:50 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:37:50 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:37:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:37:50 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:37:50 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:37:50 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:37:50 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:37:50 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:37:50 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:37:50 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:37:50 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:37:50 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:50 IQ138000 NetworkManager[404]: <warn>  [1760150270.5412] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:37:50 IQ138000 NetworkManager[404]: <info>  [1760150270.5414] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:37:50 IQ138000 NetworkManager[404]: <warn>  [1760150270.5445] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:37:50 IQ138000 NetworkManager[404]: <info>  [1760150270.5493] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:37:50 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/40
Oct 11 02:37:50 IQ138000 NetworkManager[404]: <info>  [1760150270.5923] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:37:50 IQ138000 NetworkManager[404]: <info>  [1760150270.5925] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:37:56 IQ138000 NetworkManager[404]: <info>  [1760150276.8726] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:37:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:37:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:37:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:37:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:01 IQ138000 CRON[6420]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:38:01 IQ138000 CRON[6424]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 02:38:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:02 IQ138000 sSMTP[6524]: Unable to locate mail
Oct 11 02:38:02 IQ138000 sSMTP[6524]: Cannot open mail:25
Oct 11 02:38:02 IQ138000 cron[6524]: sendmail: Cannot open mail:25
Oct 11 02:38:02 IQ138000 CRON[6420]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 02:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:02 IQ138000 CRON[6420]: pam_unix(cron:session): session closed for user root
Oct 11 02:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:38:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:38:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L2, row count 7183, limit 7042
Oct 11 02:38:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:38:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:38:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:38:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:20 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:38:20 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:38:20 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:38:20 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:38:20 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:38:20 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:38:20 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:38:20 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:38:20 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:38:20 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:38:20 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:38:20 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:38:20 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:38:20 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:38:20 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:38:20 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:38:20 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:38:20 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:38:20 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:38:20 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:38:20 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:38:20 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:38:20 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:38:20 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:38:20 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:38:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:38:20 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:38:20 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:38:20 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:38:20 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:38:20 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:38:20 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:38:20 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:38:20 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:38:20 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:38:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:38:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:38:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:38:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:38:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:38:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:38:47 IQ138000 wb-watchdog[6930]: [INFO] Interval #52 started. Waiting up to 60 seconds for error...
Oct 11 02:38:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:38:49 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:38:49 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:38:50 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:50 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:38:50 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:38:50 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:38:50 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:38:50 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:38:50 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:38:50 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:38:50 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:38:50 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:38:50 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:38:50 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:38:50 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:38:50 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:38:50 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:38:50 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:38:50 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:38:50 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:38:50 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:38:50 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:38:50 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:38:50 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:38:50 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:38:50 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:38:50 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:38:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:38:50 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:38:50 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:38:50 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:38:50 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:38:50 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:38:50 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:38:50 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:38:50 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:38:50 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2371] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2376] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2382] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2440] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2459] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2460] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2566] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2633] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2651] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2655] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2656] Config: added 'scan_ssid' value '1'
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2657] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2658] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.2659] Config: added 'psk' value '<hidden>'
Oct 11 02:38:52 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/41
Oct 11 02:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.3410] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:38:52 IQ138000 NetworkManager[404]: <info>  [1760150332.3415] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:38:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:38:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:38:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:38:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:38:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:38:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:38:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:38:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:38:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:39:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:39:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:39:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:39:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:39:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:17 IQ138000 NetworkManager[404]: <warn>  [1760150357.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:39:17 IQ138000 NetworkManager[404]: <info>  [1760150357.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:39:17 IQ138000 NetworkManager[404]: <warn>  [1760150357.5343] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:39:17 IQ138000 NetworkManager[404]: <info>  [1760150357.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:39:17 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/41
Oct 11 02:39:17 IQ138000 NetworkManager[404]: <info>  [1760150357.5781] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:39:17 IQ138000 NetworkManager[404]: <info>  [1760150357.5784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:39:20 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:39:20 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:39:20 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:39:20 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:39:20 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:39:20 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:39:20 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:39:20 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:39:20 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:39:20 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:39:20 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:39:20 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:39:20 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:39:20 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:39:20 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:39:20 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:39:20 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:39:20 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:39:20 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:39:20 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:39:20 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:39:20 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:39:20 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:39:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:39:20 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:39:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:20 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:39:20 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:39:20 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:39:20 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:39:20 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:39:20 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:39:20 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:39:20 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:24 IQ138000 NetworkManager[404]: <info>  [1760150364.0425] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:39:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:26 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:39:26 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:39:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:39:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:39:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:39:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:39:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:39:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:39:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:39:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:47 IQ138000 wb-watchdog[7549]: [INFO] Interval #53 started. Waiting up to 60 seconds for error...
Oct 11 02:39:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:39:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:39:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:39:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:39:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:39:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:39:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:39:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:39:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:39:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:39:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:39:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:39:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:39:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:39:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:39:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:39:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:39:51 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:39:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:39:51 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:39:51 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:39:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:39:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:39:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:39:51 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:39:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:39:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:51 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:39:51 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:39:51 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:39:51 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:39:51 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:39:51 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:39:51 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:39:51 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:39:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:39:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:39:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:39:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:39:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:40:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:40:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:40:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:40:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:40:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3803] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3807] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3813] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3870] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3889] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3895] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.3979] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4001] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4017] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4020] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4021] Config: added 'scan_ssid' value '1'
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4022] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4023] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4024] Config: added 'psk' value '<hidden>'
Oct 11 02:40:19 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/42
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4761] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:40:19 IQ138000 NetworkManager[404]: <info>  [1760150419.4763] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:40:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:40:21 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:40:21 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:40:21 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:40:21 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:40:21 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:40:21 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:40:21 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:40:21 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:40:21 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:40:21 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:40:21 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:40:21 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:40:21 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:40:21 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:40:21 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:40:21 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:40:21 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:40:21 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:40:21 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:40:21 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:40:21 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:40:21 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:40:21 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:40:21 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:40:21 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:40:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:40:21 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:40:21 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:40:21 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:40:21 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:40:21 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:40:21 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:40:21 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:40:21 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:40:21 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:40:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:40:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:40:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:40:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:40:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:40:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:40:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:40:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:40:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:40:39 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:40:44 IQ138000 NetworkManager[404]: <warn>  [1760150444.5314] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:40:44 IQ138000 NetworkManager[404]: <info>  [1760150444.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:40:44 IQ138000 NetworkManager[404]: <warn>  [1760150444.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:40:44 IQ138000 NetworkManager[404]: <info>  [1760150444.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:40:44 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/42
Oct 11 02:40:44 IQ138000 NetworkManager[404]: <info>  [1760150444.5822] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:40:44 IQ138000 NetworkManager[404]: <info>  [1760150444.5824] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:40:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:47 IQ138000 wb-watchdog[8244]: [INFO] Interval #54 started. Waiting up to 60 seconds for error...
Oct 11 02:40:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:50 IQ138000 NetworkManager[404]: <info>  [1760150450.2000] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:40:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:40:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:40:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:40:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:40:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:40:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:40:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:40:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:40:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:40:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:40:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:40:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:40:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:40:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:40:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:40:51 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:40:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:40:51 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:40:51 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:40:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:40:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:40:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:40:51 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:40:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:40:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:40:51 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:40:51 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:40:51 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:40:51 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:40:51 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:40:51 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:40:51 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:40:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:40:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:40:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:40:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:40:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:40:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:40:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:40:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:40:59 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:40:59 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:41:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:41:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:41:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:41:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:41:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:41:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:41:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:41:21 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:41:21 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:41:21 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:41:21 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:41:21 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:41:21 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:41:21 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:41:21 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:41:21 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:41:21 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:41:21 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:41:21 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:41:21 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:41:21 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:41:21 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:41:21 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:41:21 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:41:21 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:41:21 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:41:21 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:41:21 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:41:21 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:41:21 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:41:21 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:41:21 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:41:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:41:21 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:41:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:21 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:41:21 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:41:21 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:41:21 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:41:21 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:41:21 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:41:21 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:41:21 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:41:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:41:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:41:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:29 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:41:29 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:41:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:41:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:41:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:41:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:41:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:41:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5403] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5412] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5420] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5547] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5570] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5572] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5663] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5682] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5702] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5705] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5707] Config: added 'scan_ssid' value '1'
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5708] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5709] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.5710] Config: added 'psk' value '<hidden>'
Oct 11 02:41:45 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/43
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.6439] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:41:45 IQ138000 NetworkManager[404]: <info>  [1760150505.6442] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:41:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:41:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:47 IQ138000 wb-watchdog[8865]: [INFO] Interval #55 started. Waiting up to 60 seconds for error...
Oct 11 02:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:41:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:41:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:41:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:41:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:41:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:41:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:41:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:41:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:41:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:41:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:41:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:41:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:41:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:41:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:41:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:41:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:41:51 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:41:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:41:51 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:41:51 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:41:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:41:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:41:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:41:51 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:41:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:41:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:41:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:41:52 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:41:52 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:41:52 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:41:52 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:41:52 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:41:52 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:41:52 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:41:52 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:41:52 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:41:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:41:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:41:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:42:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:42:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:42:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:42:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:42:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:10 IQ138000 NetworkManager[404]: <warn>  [1760150530.5314] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:42:10 IQ138000 NetworkManager[404]: <info>  [1760150530.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:42:10 IQ138000 NetworkManager[404]: <warn>  [1760150530.5344] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:42:10 IQ138000 NetworkManager[404]: <info>  [1760150530.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:42:10 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/43
Oct 11 02:42:10 IQ138000 NetworkManager[404]: <info>  [1760150530.5782] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:42:10 IQ138000 NetworkManager[404]: <info>  [1760150530.5784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:42:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:42:16 IQ138000 NetworkManager[404]: <info>  [1760150536.2915] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:42:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:42:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:42:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:42:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:42:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:42:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:42:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:42:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:42:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:42:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:42:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:42:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:42:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:42:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:42:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:42:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:42:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:42:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:42:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:42:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:42:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:42:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:42:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:42:22 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:42:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:42:22 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:42:22 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:42:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:42:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:42:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:42:22 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:42:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:42:22 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:42:22 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:42:22 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:42:22 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:42:22 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:42:22 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:42:22 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:42:22 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:42:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:42:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:42:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:42:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:42:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16932 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:42:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:42:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:42:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:42:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4344 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:42:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:42:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:42:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:48 IQ138000 wb-watchdog[9575]: [INFO] Interval #56 started. Waiting up to 60 seconds for error...
Oct 11 02:42:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:42:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:52 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:42:52 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:42:52 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:42:52 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:42:52 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:42:52 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:42:52 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:42:52 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:42:52 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:42:52 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:42:52 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:42:52 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:42:52 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:42:52 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:42:52 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:42:52 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:42:52 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:42:52 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:42:52 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:42:52 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:42:52 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:42:52 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:42:52 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:42:52 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:42:52 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:42:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:42:52 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:42:52 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:42:52 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:42:52 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:42:52 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:42:52 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:42:52 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:42:52 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:42:52 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:42:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:42:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:42:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:42:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:42:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:43:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:43:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:43:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6617] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6633] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6644] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6698] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6717] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6719] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6826] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6852] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6871] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6874] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6876] Config: added 'scan_ssid' value '1'
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6876] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6878] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.6879] Config: added 'psk' value '<hidden>'
Oct 11 02:43:11 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/44
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.7598] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:43:11 IQ138000 NetworkManager[404]: <info>  [1760150591.7601] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:43:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:43:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:43:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:43:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:43:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:43:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:43:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:43:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:43:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:43:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:43:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:43:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:43:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:43:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:43:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:43:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:43:22 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:43:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:43:22 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:43:22 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:43:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:43:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:43:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:43:22 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:43:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:43:22 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:43:22 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:43:22 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:43:22 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:43:22 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:43:22 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:43:22 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:43:22 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:43:22 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:43:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8980 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L1, row count 7183, limit 7042
Oct 11 02:43:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:36 IQ138000 NetworkManager[404]: <warn>  [1760150616.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:43:36 IQ138000 NetworkManager[404]: <info>  [1760150616.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:43:36 IQ138000 NetworkManager[404]: <warn>  [1760150616.5349] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:43:36 IQ138000 NetworkManager[404]: <info>  [1760150616.5363] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:43:36 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/44
Oct 11 02:43:36 IQ138000 NetworkManager[404]: <info>  [1760150616.5746] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:43:36 IQ138000 NetworkManager[404]: <info>  [1760150616.5748] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:43:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:43:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:43:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:43:41 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:43:41 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:43:42 IQ138000 NetworkManager[404]: <info>  [1760150622.4237] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:43:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:47 IQ138000 wb-watchdog[10185]: [INFO] Interval #57 started. Waiting up to 60 seconds for error...
Oct 11 02:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:52 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:43:52 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:43:52 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:43:52 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:43:52 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:43:52 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:43:52 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:43:52 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:43:52 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:43:52 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:43:52 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:43:52 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:43:52 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:43:52 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:43:52 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:43:52 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:43:52 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:43:52 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:43:52 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:43:52 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:43:52 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:43:52 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:43:52 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:43:52 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:43:52 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:43:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:43:52 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:43:52 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:43:52 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:43:52 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:43:52 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:43:52 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:43:52 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:43:52 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:43:52 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:43:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:43:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:43:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:43:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:43:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:43:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:44:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:44:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:44:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:44:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 02:44:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:44:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:09 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:44:09 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:44:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:44:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:44:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:44:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:44:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:44:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:44:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:44:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:44:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:44:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:44:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:44:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:44:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:44:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:44:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:44:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:44:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:44:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:44:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:44:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:44:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:44:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:44:22 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:44:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:44:22 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:44:22 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:44:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:44:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:44:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:44:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:44:23 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:44:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:23 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:44:23 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:44:23 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:44:23 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:44:23 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:44:23 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:44:23 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:44:23 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:44:23 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:44:23 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:44:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:44:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:44:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:44:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:44:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7445] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7463] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7487] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7571] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7593] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7595] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7710] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7734] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7752] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7755] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7756] Config: added 'scan_ssid' value '1'
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7757] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7758] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.7759] Config: added 'psk' value '<hidden>'
Oct 11 02:44:37 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/45
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.8517] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:44:37 IQ138000 NetworkManager[404]: <info>  [1760150677.8523] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:44:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:44:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:44:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:44:39 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:44:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:44:47 IQ138000 wb-watchdog[10893]: [INFO] Interval #58 started. Waiting up to 60 seconds for error...
Oct 11 02:44:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:44:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:44:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:44:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:44:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:44:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:44:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:44:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:44:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:44:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:44:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:44:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:44:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:44:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:44:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:44:53 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:44:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:44:53 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:44:53 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:44:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:44:53 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:44:53 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:44:53 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:44:53 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:44:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:44:53 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:44:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:44:53 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:44:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:44:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:44:53 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:44:53 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:44:53 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:44:53 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:44:53 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:44:53 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:44:53 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:44:53 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:44:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:44:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:44:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:45:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:45:01 IQ138000 CRON[11090]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:45:01 IQ138000 CRON[11094]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 02:45:01 IQ138000 CRON[11090]: pam_unix(cron:session): session closed for user root
Oct 11 02:45:02 IQ138000 NetworkManager[404]: <warn>  [1760150702.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:45:02 IQ138000 NetworkManager[404]: <info>  [1760150702.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:45:02 IQ138000 NetworkManager[404]: <warn>  [1760150702.5346] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:45:02 IQ138000 NetworkManager[404]: <info>  [1760150702.5420] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:45:02 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/45
Oct 11 02:45:02 IQ138000 NetworkManager[404]: <info>  [1760150702.5845] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:45:02 IQ138000 NetworkManager[404]: <info>  [1760150702.5847] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:45:07 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:45:08 IQ138000 NetworkManager[404]: <info>  [1760150708.5009] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:45:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:13 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:45:13 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:45:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:45:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:22 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:45:22 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:45:23 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:45:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:45:23 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:45:23 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:45:23 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:45:23 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:45:23 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:45:23 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:45:23 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:45:23 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:45:23 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:45:23 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:45:23 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:45:23 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:45:23 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:45:23 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:45:23 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:45:23 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:45:23 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:45:23 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:45:23 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:45:23 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:45:23 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:45:23 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:45:23 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:45:23 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:45:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:45:23 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:45:23 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:45:23 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:45:23 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:45:23 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:45:23 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:45:23 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:45:23 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:45:23 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:45:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:45:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:45:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:45:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:47 IQ138000 wb-watchdog[11504]: [INFO] Interval #59 started. Waiting up to 60 seconds for error...
Oct 11 02:45:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:45:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:45:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:45:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:45:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:45:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:45:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:45:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:45:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:45:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:45:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:45:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:45:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:45:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:45:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:45:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:45:53 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:45:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:45:53 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:45:53 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:45:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:45:53 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:45:53 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:45:53 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:45:53 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:45:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:45:53 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:45:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:45:53 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:45:53 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:45:53 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:45:53 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:45:53 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:45:53 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:45:53 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:45:53 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:45:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:45:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:45:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:45:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:45:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:45:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:45:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:45:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:45:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7743] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7762] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7768] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7871] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7903] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7908] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.7993] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8020] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8052] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8056] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8057] Config: added 'scan_ssid' value '1'
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8059] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8060] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:46:03 IQ138000 NetworkManager[404]: <info>  [1760150763.8061] Config: added 'psk' value '<hidden>'
Oct 11 02:46:03 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/46
Oct 11 02:46:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:46:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:46:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:46:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:07 IQ138000 NetworkManager[404]: <info>  [1760150767.8845] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:46:07 IQ138000 NetworkManager[404]: <info>  [1760150767.8848] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:46:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:46:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:46:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L1, row count 7183, limit 7042
Oct 11 02:46:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:46:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:46:23 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:46:23 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:46:23 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:46:23 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:46:23 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:46:23 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:46:23 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:46:23 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:46:23 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:46:23 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:46:23 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:46:23 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:46:23 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:46:23 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:46:23 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:46:23 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:46:23 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:46:23 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:46:23 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:46:23 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:46:23 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:46:23 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:46:23 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:46:23 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:46:23 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:46:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:46:23 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:46:23 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:46:23 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:46:23 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:46:23 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:46:23 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:46:23 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:46:23 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:46:23 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:46:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:46:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:46:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:46:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:46:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:29 IQ138000 NetworkManager[404]: <warn>  [1760150789.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:46:29 IQ138000 NetworkManager[404]: <info>  [1760150789.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:46:29 IQ138000 NetworkManager[404]: <warn>  [1760150789.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:46:29 IQ138000 NetworkManager[404]: <info>  [1760150789.5356] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:46:29 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/46
Oct 11 02:46:29 IQ138000 NetworkManager[404]: <info>  [1760150789.5801] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:46:29 IQ138000 NetworkManager[404]: <info>  [1760150789.5803] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:46:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:46:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:46:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:46:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:46:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:46:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:46:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:35 IQ138000 NetworkManager[404]: <info>  [1760150795.5064] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:46:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:46:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:46:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:46:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:46:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:46:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:47 IQ138000 wb-watchdog[12215]: [INFO] Interval #60 started. Waiting up to 60 seconds for error...
Oct 11 02:46:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:46:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:46:54 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:46:54 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:46:54 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:46:54 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:46:54 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:46:54 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:46:54 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:46:54 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:46:54 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:46:54 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:46:54 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:46:54 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:46:54 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:46:54 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:46:54 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:46:54 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:46:54 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:46:54 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:46:54 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:46:54 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:46:54 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:46:54 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:46:54 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:46:54 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:46:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:46:54 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:46:54 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:46:54 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:46:54 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:46:54 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:46:54 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:46:54 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:46:54 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:46:54 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:46:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:46:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:46:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:46:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:46:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:46:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:46:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:46:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:47:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:47:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:47:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:47:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:47:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:47:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:47:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:47:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:47:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:47:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:47:24 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:47:24 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:47:24 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:47:24 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:47:24 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:47:24 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:47:24 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:47:24 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:47:24 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:47:24 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:47:24 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:47:24 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:47:24 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:47:24 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:47:24 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:47:24 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:47:24 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:47:24 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:47:24 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:47:24 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:47:24 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:47:24 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:47:24 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:47:24 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:47:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:47:24 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:47:24 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:47:24 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:47:24 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:47:24 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:47:24 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:47:24 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:47:24 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:47:24 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:47:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7042] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7056] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7064] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7121] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7139] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7141] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7228] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7247] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7263] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7266] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7267] Config: added 'scan_ssid' value '1'
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7268] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7269] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7269] Config: added 'psk' value '<hidden>'
Oct 11 02:47:30 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/47
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7979] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:47:30 IQ138000 NetworkManager[404]: <info>  [1760150850.7982] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:47:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:47:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:47:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:47:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:47:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:47:42 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:47:42 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:47:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:47 IQ138000 wb-watchdog[12818]: [INFO] Interval #61 started. Waiting up to 60 seconds for error...
Oct 11 02:47:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:47:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:47:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:47:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:47:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:54 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:47:54 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:47:54 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:47:54 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:47:54 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:47:54 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:47:54 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:47:54 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:47:54 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:47:54 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:47:54 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:47:54 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:47:54 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:47:54 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:47:54 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:47:54 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:47:54 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:47:54 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:47:54 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:47:54 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:47:54 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:47:54 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:47:54 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:47:54 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:47:54 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:47:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:47:54 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:47:54 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:47:54 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:47:54 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:47:54 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:47:54 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:47:54 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:47:54 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:47:54 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:47:55 IQ138000 NetworkManager[404]: <warn>  [1760150875.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:47:55 IQ138000 NetworkManager[404]: <info>  [1760150875.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:47:55 IQ138000 NetworkManager[404]: <warn>  [1760150875.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:47:55 IQ138000 NetworkManager[404]: <info>  [1760150875.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:47:55 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/47
Oct 11 02:47:55 IQ138000 NetworkManager[404]: <info>  [1760150875.5781] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:47:55 IQ138000 NetworkManager[404]: <info>  [1760150875.5783] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:47:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:47:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:47:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:47:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:47:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:47:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:48:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:01 IQ138000 NetworkManager[404]: <info>  [1760150881.4639] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:48:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:48:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:48:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:48:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:12 IQ138000 ntpd[1651]: 85.193.65.152 local addr 10.34.0.171 -> <null>
Oct 11 02:48:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L1, row count 7183, limit 7042
Oct 11 02:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:48:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:48:24 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:48:24 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:48:24 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:48:24 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:48:24 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:48:24 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:48:24 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:48:24 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:48:24 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:48:24 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:48:24 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:48:24 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:48:24 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:48:24 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:48:24 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:48:24 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:48:24 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:48:24 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:48:24 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:48:24 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:48:24 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:48:24 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:48:24 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:48:24 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:48:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:48:24 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:48:24 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:48:24 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:48:24 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:48:24 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:48:24 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:48:24 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:48:24 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:48:24 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:48:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:48:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:48:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:48:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:47 IQ138000 wb-watchdog[13531]: [INFO] Interval #62 started. Waiting up to 60 seconds for error...
Oct 11 02:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:48:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:48:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:48:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:48:54 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:48:54 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:48:54 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:48:54 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:48:54 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:48:54 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:48:54 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:48:54 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:48:54 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:48:54 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:48:54 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:48:54 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:48:54 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:48:54 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:48:54 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:48:54 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:48:54 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:48:54 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:48:54 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:48:54 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:48:54 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:48:54 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:48:54 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:48:54 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:48:54 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:48:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:48:54 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:48:54 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:48:54 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:48:54 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:48:54 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:48:54 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:48:54 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:48:54 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:48:54 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:48:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7041] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7064] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7071] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7137] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7158] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7159] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7281] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7323] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7346] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7349] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7350] Config: added 'scan_ssid' value '1'
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7351] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7353] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.7353] Config: added 'psk' value '<hidden>'
Oct 11 02:48:56 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/48
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.8045] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:48:56 IQ138000 NetworkManager[404]: <info>  [1760150936.8051] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:48:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:48:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:49:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:49:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:49:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:49:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:49:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:49:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:49:15 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:49:15 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:49:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:49:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:49:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:21 IQ138000 NetworkManager[404]: <warn>  [1760150961.5301] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:49:21 IQ138000 NetworkManager[404]: <info>  [1760150961.5303] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:49:21 IQ138000 NetworkManager[404]: <warn>  [1760150961.5332] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:49:21 IQ138000 NetworkManager[404]: <info>  [1760150961.5345] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:49:21 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/48
Oct 11 02:49:21 IQ138000 NetworkManager[404]: <info>  [1760150961.5742] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:49:21 IQ138000 NetworkManager[404]: <info>  [1760150961.5745] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:49:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:49:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:49:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:49:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:25 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:49:25 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:49:25 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:49:25 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:49:25 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:49:25 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:49:25 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:49:25 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:49:25 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:49:25 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:49:25 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:49:25 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:49:25 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:49:25 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:49:25 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:49:25 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:49:25 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:49:25 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:49:25 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:49:25 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:49:25 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:49:25 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:49:25 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:49:25 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:49:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:49:25 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:25 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:49:25 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:49:25 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:49:25 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:49:25 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:49:25 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:49:25 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:49:25 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:49:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:49:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:49:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:49:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:49:27 IQ138000 NetworkManager[404]: <info>  [1760150967.4459] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:49:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:49:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:49:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:49:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:49:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:49:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:49:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:49:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:49:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:49:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:49:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:47 IQ138000 wb-watchdog[14149]: [INFO] Interval #63 started. Waiting up to 60 seconds for error...
Oct 11 02:49:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:55 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:49:55 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:49:55 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:49:55 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:49:55 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:49:55 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:49:55 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:49:55 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:49:55 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:49:55 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:49:55 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:49:55 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:49:55 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:49:55 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:49:55 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:49:55 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:49:55 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:49:55 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:49:55 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:49:55 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:49:55 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:49:55 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:49:55 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:49:55 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:49:55 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:49:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:49:55 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:49:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:49:55 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:49:55 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:49:55 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:49:55 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:49:55 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:49:55 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:49:55 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:49:55 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:49:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:49:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:49:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:49:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:50:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:50:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:50:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:50:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:50:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:50:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:50:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7235] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7294] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7303] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7364] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7382] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7384] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7495] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7536] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7557] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7569] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7573] Config: added 'scan_ssid' value '1'
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7575] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7576] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.7577] Config: added 'psk' value '<hidden>'
Oct 11 02:50:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/49
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.8310] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:50:22 IQ138000 NetworkManager[404]: <info>  [1760151022.8312] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:50:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:50:25 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:50:25 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:50:25 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:50:25 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:50:25 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:50:25 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:50:25 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:50:25 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:50:25 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:50:25 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:50:25 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:50:25 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:50:25 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:50:25 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:50:25 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:50:25 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:50:25 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:50:25 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:50:25 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:50:25 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:50:25 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:50:25 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:50:25 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:50:25 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:50:25 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:50:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:50:25 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:50:25 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:50:25 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:50:25 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:50:25 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:50:25 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:50:25 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:50:25 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:50:25 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:50:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:50:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:50:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:50:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:50:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:50:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:50:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:50:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:50:47 IQ138000 NetworkManager[404]: <warn>  [1760151047.5313] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:50:47 IQ138000 NetworkManager[404]: <info>  [1760151047.5315] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:50:47 IQ138000 NetworkManager[404]: <warn>  [1760151047.5346] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:50:47 IQ138000 NetworkManager[404]: <info>  [1760151047.5362] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:50:47 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/49
Oct 11 02:50:47 IQ138000 NetworkManager[404]: <info>  [1760151047.5824] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:50:47 IQ138000 NetworkManager[404]: <info>  [1760151047.5826] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:50:47 IQ138000 wb-watchdog[14846]: [INFO] Interval #64 started. Waiting up to 60 seconds for error...
Oct 11 02:50:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:48 IQ138000 kernel: hrtimer: interrupt took 215000 ns
Oct 11 02:50:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:50:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:50:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:50:53 IQ138000 NetworkManager[404]: <info>  [1760151053.4748] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:50:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:50:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:50:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:50:55 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:50:55 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:50:55 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:50:55 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:50:55 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:50:55 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:50:55 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:50:55 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:50:55 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:50:55 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:50:55 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:50:55 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:50:55 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:50:55 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:50:55 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:50:55 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:50:55 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:50:55 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:50:55 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:50:55 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:50:55 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:50:55 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:50:55 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:50:55 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:50:55 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:50:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:50:55 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:50:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:50:55 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:50:55 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:50:55 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:50:55 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:50:55 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:50:55 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:50:55 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:50:55 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:50:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:50:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:50:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:51:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:51:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:51:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:51:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:51:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:51:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:51:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:51:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:51:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:51:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:51:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:51:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:51:25 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:51:25 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:51:25 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:51:25 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:51:25 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:51:25 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:51:25 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:51:25 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:51:25 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:51:25 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:51:25 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:51:25 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:51:25 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:51:25 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:51:25 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:51:25 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:51:25 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:51:25 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:51:25 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:51:25 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:51:25 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:51:25 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:51:25 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:51:25 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:51:25 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:51:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:25 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:51:25 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:51:26 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:51:26 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:51:26 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:51:26 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:51:26 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:51:26 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:51:26 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:51:26 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:51:26 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:51:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:26 IQ138000 ntpd[1651]: 162.159.200.1 local addr 10.34.0.171 -> <null>
Oct 11 02:51:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:51:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:51:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:35 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:51:35 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:51:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:51:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:51:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:47 IQ138000 wb-watchdog[15456]: [INFO] Interval #65 started. Waiting up to 60 seconds for error...
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7150] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7155] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7160] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7222] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7240] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7242] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7343] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7361] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7379] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7382] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7391] Config: added 'scan_ssid' value '1'
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7393] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7394] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.7395] Config: added 'psk' value '<hidden>'
Oct 11 02:51:48 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/50
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.8117] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:51:48 IQ138000 NetworkManager[404]: <info>  [1760151108.8119] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:51:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:51:56 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:51:56 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:51:56 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:51:56 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:51:56 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:51:56 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:51:56 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:51:56 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:51:56 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:51:56 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:51:56 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:51:56 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:51:56 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:51:56 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:51:56 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:51:56 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:51:56 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:51:56 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:51:56 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:51:56 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:51:56 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:51:56 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:51:56 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:51:56 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:51:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:51:56 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:51:56 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:51:56 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:51:56 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:51:56 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:51:56 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:51:56 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:51:56 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:51:56 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:51:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:51:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:51:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:51:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:13 IQ138000 NetworkManager[404]: <warn>  [1760151133.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:52:13 IQ138000 NetworkManager[404]: <info>  [1760151133.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:52:13 IQ138000 NetworkManager[404]: <warn>  [1760151133.5343] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:52:13 IQ138000 NetworkManager[404]: <info>  [1760151133.5355] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:52:13 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/50
Oct 11 02:52:13 IQ138000 NetworkManager[404]: <info>  [1760151133.5792] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:52:13 IQ138000 NetworkManager[404]: <info>  [1760151133.5794] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:52:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:52:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:52:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:52:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:52:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:52:19 IQ138000 NetworkManager[404]: <info>  [1760151139.4651] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:52:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:52:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:26 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:52:26 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:52:26 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:52:26 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:52:26 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:52:26 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:52:26 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:52:26 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:52:26 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:52:26 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:52:26 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:52:26 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:52:26 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:52:26 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:52:26 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:52:26 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:52:26 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:52:26 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:52:26 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:52:26 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:52:26 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:52:26 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:52:26 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:52:26 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:52:26 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:52:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:52:26 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:52:26 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:52:26 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:52:26 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:52:26 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:52:26 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:52:26 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:52:26 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:52:26 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:52:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:52:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:52:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:52:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:52:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:52:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:52:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:52:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:52:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:52:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:52:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:52:47 IQ138000 wb-watchdog[16158]: [INFO] Interval #66 started. Waiting up to 60 seconds for error...
Oct 11 02:52:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:52:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:52:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:52:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:52:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:52:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:52:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:52:56 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:52:56 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:52:56 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:52:56 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:52:56 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:52:56 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:52:56 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:52:56 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:52:56 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:52:56 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:52:56 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:52:56 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:52:56 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:52:56 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:52:56 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:52:56 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:52:56 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:52:56 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:52:56 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:52:56 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:52:56 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:52:56 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:52:56 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:52:56 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:52:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:52:56 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:52:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:52:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:52:56 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:52:56 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:52:56 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:52:56 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:52:56 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:52:56 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:52:56 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:52:56 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:52:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:53:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:53:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:53:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.7768] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.7781] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.7788] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.7872] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.7909] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.7922] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8038] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8058] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8081] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8084] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8085] Config: added 'scan_ssid' value '1'
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8086] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8087] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8088] Config: added 'psk' value '<hidden>'
Oct 11 02:53:14 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/51
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8864] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:53:14 IQ138000 NetworkManager[404]: <info>  [1760151194.8867] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:53:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:53:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:26 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:53:26 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:53:26 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:53:26 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:53:26 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:53:26 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:53:26 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:53:26 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:53:26 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:53:26 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:53:26 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:53:26 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:53:26 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:53:26 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:53:26 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:53:26 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:53:26 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:53:26 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:53:26 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:53:26 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:53:26 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:53:26 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:53:26 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:53:26 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:53:26 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:53:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:53:26 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:53:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:26 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:53:26 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:53:26 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:53:26 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:53:26 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:53:26 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:53:26 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:53:26 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:53:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 9984 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:40 IQ138000 NetworkManager[404]: <warn>  [1760151220.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:53:40 IQ138000 NetworkManager[404]: <info>  [1760151220.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:53:40 IQ138000 NetworkManager[404]: <warn>  [1760151220.5333] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:53:40 IQ138000 NetworkManager[404]: <info>  [1760151220.5345] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:53:40 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:53:40 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/51
Oct 11 02:53:40 IQ138000 NetworkManager[404]: <info>  [1760151220.5814] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:53:40 IQ138000 NetworkManager[404]: <info>  [1760151220.5819] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:53:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:41 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:53:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:53:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:53:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:53:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:53:46 IQ138000 NetworkManager[404]: <info>  [1760151226.5393] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:53:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:47 IQ138000 wb-watchdog[16773]: [INFO] Interval #67 started. Waiting up to 60 seconds for error...
Oct 11 02:53:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 02:53:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 02:53:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 02:53:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:53:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:53:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:53:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:53:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:57 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:53:57 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:53:57 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:53:57 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:53:57 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:53:57 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:53:57 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:53:57 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:53:57 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:53:57 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:53:57 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:53:57 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:53:57 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:53:57 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:53:57 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:53:57 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:53:57 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:53:57 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:53:57 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:53:57 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:53:57 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:53:57 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:53:57 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:53:57 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:53:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:53:57 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:53:57 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:53:57 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:53:57 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:53:57 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:53:57 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:53:57 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:53:57 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:53:57 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:53:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:53:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L2, row count 7183, limit 7042
Oct 11 02:54:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:54:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:54:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:27 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:54:27 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:54:27 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:54:27 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:54:27 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:54:27 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:54:27 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:54:27 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:54:27 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:54:27 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:54:27 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:54:27 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:54:27 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:54:27 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:54:27 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:54:27 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:54:27 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:54:27 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:54:27 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:54:27 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:54:27 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:54:27 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:54:27 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:54:27 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:54:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:54:27 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:54:27 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:54:27 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:54:27 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:54:27 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:54:27 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:54:27 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:54:27 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:54:27 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:54:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:54:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:54:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:54:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.8837] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.8845] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.8855] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9120] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9162] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9164] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9250] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9273] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9293] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9297] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9298] Config: added 'scan_ssid' value '1'
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9300] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9301] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:54:41 IQ138000 NetworkManager[404]: <info>  [1760151281.9302] Config: added 'psk' value '<hidden>'
Oct 11 02:54:41 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/52
Oct 11 02:54:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:54:42 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:54:42 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:54:45 IQ138000 NetworkManager[404]: <info>  [1760151285.0336] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:54:45 IQ138000 NetworkManager[404]: <info>  [1760151285.0338] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:54:47 IQ138000 wb-watchdog[17485]: [INFO] Interval #68 started. Waiting up to 60 seconds for error...
Oct 11 02:54:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:54:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:54:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:54:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:54:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:57 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:54:57 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:54:57 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:54:57 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:54:57 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:54:57 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:54:57 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:54:57 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:54:57 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:54:57 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:54:57 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:54:57 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:54:57 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:54:57 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:54:57 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:54:57 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:54:57 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:54:57 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:54:57 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:54:57 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:54:57 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:54:57 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:54:57 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:54:57 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:54:57 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:54:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:54:57 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:54:57 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:54:57 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:54:57 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:54:57 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:54:57 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:54:57 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:54:57 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:54:57 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:54:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:54:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:54:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:01 IQ138000 CRON[17683]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 02:55:01 IQ138000 CRON[17687]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 02:55:01 IQ138000 CRON[17683]: pam_unix(cron:session): session closed for user root
Oct 11 02:55:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:55:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:55:07 IQ138000 NetworkManager[404]: <warn>  [1760151307.5313] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:55:07 IQ138000 NetworkManager[404]: <info>  [1760151307.5315] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:55:07 IQ138000 NetworkManager[404]: <warn>  [1760151307.5344] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:55:07 IQ138000 NetworkManager[404]: <info>  [1760151307.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:55:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/52
Oct 11 02:55:07 IQ138000 NetworkManager[404]: <info>  [1760151307.5796] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:55:07 IQ138000 NetworkManager[404]: <info>  [1760151307.5798] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:55:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:08 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:08 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:55:12 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:13 IQ138000 NetworkManager[404]: <info>  [1760151313.7285] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:55:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:55:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:55:27 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:55:27 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:55:27 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:55:27 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:55:27 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:55:27 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:55:27 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:55:27 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:55:27 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:55:27 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:55:27 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:55:27 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:55:27 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:55:27 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:55:27 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:55:27 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:55:27 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:55:27 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:55:27 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:55:27 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:55:27 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:55:27 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:55:27 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:55:27 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:55:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:55:27 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:55:27 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:55:27 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:55:27 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:55:27 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:55:27 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:55:27 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:55:27 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:55:27 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:55:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:55:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:55:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:55:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L3, row count 7183, limit 7042
Oct 11 02:55:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:55:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:55:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 5 input(s) @ 5889 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:55:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 8441 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:55:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:55:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:47 IQ138000 wb-watchdog[18099]: [INFO] Interval #69 started. Waiting up to 60 seconds for error...
Oct 11 02:55:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:55:57 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:55:57 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:55:57 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:55:57 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:55:57 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:55:57 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:55:57 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:55:57 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:55:57 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:55:57 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:55:57 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:55:57 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:55:57 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:55:57 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:55:57 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:55:57 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:55:57 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:55:57 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:55:57 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:55:57 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:55:57 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:55:57 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:55:57 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:55:57 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:55:57 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:55:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:55:57 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:55:57 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:55:57 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:55:57 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:55:57 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:55:57 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:55:57 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:55:57 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:55:57 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16912 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:55:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:56:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:56:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:56:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:56:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0785] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0796] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0805] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0866] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0884] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0886] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.0981] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1018] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1057] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1062] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1064] Config: added 'scan_ssid' value '1'
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1066] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1068] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:56:09 IQ138000 NetworkManager[404]: <info>  [1760151369.1071] Config: added 'psk' value '<hidden>'
Oct 11 02:56:09 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/53
Oct 11 02:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:12 IQ138000 NetworkManager[404]: <info>  [1760151372.1854] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:56:12 IQ138000 NetworkManager[404]: <info>  [1760151372.1856] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:56:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:56:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:56:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:56:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:56:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:56:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:56:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:56:28 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:56:28 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:56:28 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:56:28 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:56:28 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:56:28 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:56:28 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:56:28 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:56:28 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:56:28 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:56:28 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:56:28 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:56:28 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:56:28 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:56:28 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:56:28 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:56:28 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:56:28 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:56:28 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:56:28 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:56:28 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:56:28 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:56:28 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:56:28 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:56:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:56:28 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:56:28 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:56:28 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:56:28 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:56:28 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:56:28 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:56:28 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:56:28 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:56:28 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:56:28 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:56:28 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:56:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:34 IQ138000 NetworkManager[404]: <warn>  [1760151394.5303] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:56:34 IQ138000 NetworkManager[404]: <info>  [1760151394.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:56:34 IQ138000 NetworkManager[404]: <warn>  [1760151394.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:56:34 IQ138000 NetworkManager[404]: <info>  [1760151394.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:56:34 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/53
Oct 11 02:56:34 IQ138000 NetworkManager[404]: <info>  [1760151394.5805] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:56:34 IQ138000 NetworkManager[404]: <info>  [1760151394.5807] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:56:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:56:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:56:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:56:40 IQ138000 NetworkManager[404]: <info>  [1760151400.8108] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:56:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:47 IQ138000 wb-watchdog[18804]: [INFO] Interval #70 started. Waiting up to 60 seconds for error...
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:56:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:56:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:56:58 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:56:58 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:56:58 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:56:58 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:56:58 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:56:58 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:56:58 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:56:58 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:56:58 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:56:58 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:56:58 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:56:58 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:56:58 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:56:58 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:56:58 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:56:58 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:56:58 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:56:58 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:56:58 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:56:58 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:56:58 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:56:58 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:56:58 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:56:58 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:56:58 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:56:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:56:58 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:56:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:56:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:56:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:56:58 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:56:58 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:56:58 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:56:58 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:56:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:56:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:56:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:57:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:57:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:57:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:57:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:57:28 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:57:28 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:57:28 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:57:28 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:57:28 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:57:28 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:57:28 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:57:28 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:57:28 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:57:28 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:57:28 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:57:28 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:57:28 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:57:28 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:57:28 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:57:28 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:57:28 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:57:28 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:57:28 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:57:28 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:57:28 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:57:28 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:57:28 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:57:28 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:57:28 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:57:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:57:28 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:57:28 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:57:28 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:57:28 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:57:28 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:57:28 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:57:28 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:57:28 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:57:28 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:57:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:57:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:57:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:57:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1189] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1194] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1201] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1269] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1288] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1291] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1465] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1488] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1509] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1513] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1514] Config: added 'scan_ssid' value '1'
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1516] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1517] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.1518] Config: added 'psk' value '<hidden>'
Oct 11 02:57:36 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/54
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.2255] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:57:36 IQ138000 NetworkManager[404]: <info>  [1760151456.2257] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:57:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:57:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:47 IQ138000 wb-watchdog[19411]: [INFO] Interval #71 started. Waiting up to 60 seconds for error...
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 02:57:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:57:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 02:57:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 02:57:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 02:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:57:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:57:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:57:58 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:57:58 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:57:58 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:57:58 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:57:58 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:57:58 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:57:58 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:57:58 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:57:58 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:57:58 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:57:58 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:57:58 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:57:58 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:57:58 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:57:58 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:57:58 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:57:58 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:57:58 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:57:58 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:57:58 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:57:58 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:57:58 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:57:58 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:57:58 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:57:58 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:57:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:57:58 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:57:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:57:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:57:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:57:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:57:58 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:57:58 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:57:58 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:57:58 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:01 IQ138000 NetworkManager[404]: <warn>  [1760151481.5303] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:58:01 IQ138000 NetworkManager[404]: <info>  [1760151481.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:58:01 IQ138000 NetworkManager[404]: <warn>  [1760151481.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:58:01 IQ138000 NetworkManager[404]: <info>  [1760151481.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:58:01 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/54
Oct 11 02:58:01 IQ138000 NetworkManager[404]: <info>  [1760151481.5824] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:58:01 IQ138000 NetworkManager[404]: <info>  [1760151481.5826] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:58:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:07 IQ138000 NetworkManager[404]: <info>  [1760151487.8457] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:58:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:58:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:58:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:12 IQ138000 npm[3714]: [2025-10-11 02:58:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.32,"last_seen":1760151492371,"linkquality":47,"power_outage_count":25795,"pressure":993.4,"temperature":21.17,"voltage":3005}'
Oct 11 02:58:12 IQ138000 npm[3714]: [2025-10-11 02:58:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.14,"last_seen":1760151492401,"linkquality":47,"power_outage_count":25795,"pressure":993.4,"temperature":21.17,"voltage":3005}'
Oct 11 02:58:12 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:58:12 IQ138000 npm[3714]: [2025-10-11 02:58:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.14,"last_seen":1760151492401,"linkquality":47,"power_outage_count":25795,"pressure":993.6,"temperature":21.17,"voltage":3005}'
Oct 11 02:58:12 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:58:12 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:58:12 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:58:12 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:58:12 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 02:58:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:58:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:58:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:58:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:58:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:58:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:58:28 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:58:28 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:58:28 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:58:28 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:58:28 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:58:28 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:58:28 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:58:28 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:58:28 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:58:28 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:58:28 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:58:28 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:58:28 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:58:28 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:58:28 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:58:28 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:58:28 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:58:28 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:58:28 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:58:28 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:58:28 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:58:28 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:58:28 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:58:28 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:58:28 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:58:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:28 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:58:28 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:58:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:58:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:58:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:58:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:58:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:58:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:58:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:58:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:58:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:58:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:58:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:58:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:58:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:58:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:58:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 02:58:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:47 IQ138000 wb-watchdog[20124]: [INFO] Interval #72 started. Waiting up to 60 seconds for error...
Oct 11 02:58:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:58:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:58:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:58:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:58:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:58:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:58:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:59 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:58:59 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:58:59 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:58:59 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:58:59 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:58:59 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:58:59 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:58:59 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:58:59 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:58:59 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:58:59 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:58:59 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:58:59 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:58:59 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:58:59 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:58:59 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:58:59 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:58:59 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:58:59 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:58:59 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:58:59 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:58:59 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:58:59 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:58:59 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:58:59 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:58:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:58:59 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:58:59 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:58:59 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:58:59 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:58:59 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:58:59 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:58:59 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:58:59 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:58:59 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1735] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1739] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1744] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1832] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1848] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1849] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1938] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1958] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1974] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1977] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1978] Config: added 'scan_ssid' value '1'
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1979] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1980] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.1981] Config: added 'psk' value '<hidden>'
Oct 11 02:59:03 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/55
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.2709] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 02:59:03 IQ138000 NetworkManager[404]: <info>  [1760151543.2712] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 02:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:59:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:59:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:59:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:59:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:59:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:28 IQ138000 NetworkManager[404]: <warn>  [1760151568.5303] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 02:59:28 IQ138000 NetworkManager[404]: <info>  [1760151568.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 02:59:28 IQ138000 NetworkManager[404]: <warn>  [1760151568.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 02:59:28 IQ138000 NetworkManager[404]: <info>  [1760151568.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 02:59:28 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/55
Oct 11 02:59:28 IQ138000 NetworkManager[404]: <info>  [1760151568.5757] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 02:59:28 IQ138000 NetworkManager[404]: <info>  [1760151568.5759] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 02:59:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:29 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:59:29 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:59:29 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:59:29 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:59:29 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:59:29 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:59:29 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:59:29 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:59:29 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:59:29 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:59:29 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:59:29 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:59:29 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:59:29 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:59:29 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:59:29 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:59:29 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:59:29 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:59:29 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:59:29 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:59:29 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:59:29 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:59:29 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:59:29 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:59:29 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:59:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:59:29 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:59:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:59:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:59:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:59:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:59:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:59:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:59:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:59:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:59:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:32 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:59:32 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:59:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:34 IQ138000 NetworkManager[404]: <info>  [1760151574.9866] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 02:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:59:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:59:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:59:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 02:59:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:59:47 IQ138000 wb-watchdog[20741]: [INFO] Interval #73 started. Waiting up to 60 seconds for error...
Oct 11 02:59:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:49 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:59:49 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 02:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 02:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 02:59:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 02:59:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 02:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 02:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 02:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 02:59:59 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 02:59:59 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 02:59:59 IQ138000 python3[1970]:    --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 02:59:59 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 02:59:59 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 02:59:59 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 02:59:59 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 02:59:59 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 02:59:59 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 02:59:59 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 02:59:59 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 02:59:59 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 02:59:59 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 02:59:59 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 02:59:59 IQ138000 python3[1970]:            |                state: connected
Oct 11 02:59:59 IQ138000 python3[1970]:            |          power state: on
Oct 11 02:59:59 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 02:59:59 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 02:59:59 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 02:59:59 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 02:59:59 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 02:59:59 IQ138000 python3[1970]:            |         registration: home
Oct 11 02:59:59 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:59:59 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 02:59:59 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 02:59:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 02:59:59 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:59:59 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 02:59:59 IQ138000 python3[1970]:    -------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 02:59:59 IQ138000 python3[1970]:   -------------------------------
Oct 11 02:59:59 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 02:59:59 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 02:59:59 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 02:59:59 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 02:59:59 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 02:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 02:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:00:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:00:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:00:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:00:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:00:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:00:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:00:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:00:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:00:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:00:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:29 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:00:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:00:29 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:00:29 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:00:29 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:00:29 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:00:29 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:00:29 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:00:29 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:00:29 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:00:29 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:00:29 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:00:29 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:00:29 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:00:29 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:00:29 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:00:29 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:00:29 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:00:29 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:00:29 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:00:29 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:00:29 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:00:29 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:00:29 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:00:29 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:00:29 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:00:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:00:29 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:00:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:00:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:00:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:00:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:00:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:00:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:00:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:00:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2371] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2376] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2383] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2483] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2510] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2512] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2642] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2664] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2689] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2695] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2697] Config: added 'scan_ssid' value '1'
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2698] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2699] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.2714] Config: added 'psk' value '<hidden>'
Oct 11 03:00:30 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/56
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.3423] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:00:30 IQ138000 NetworkManager[404]: <info>  [1760151630.3425] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:00:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:00:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:00:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:00:35 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:00:35 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:00:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:00:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:00:47 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:00:47 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:00:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:47 IQ138000 wb-watchdog[21435]: [INFO] Interval #74 started. Waiting up to 60 seconds for error...
Oct 11 03:00:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:00:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:00:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:00:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:55 IQ138000 NetworkManager[404]: <warn>  [1760151655.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:00:55 IQ138000 NetworkManager[404]: <info>  [1760151655.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:00:55 IQ138000 NetworkManager[404]: <warn>  [1760151655.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:00:55 IQ138000 NetworkManager[404]: <info>  [1760151655.5356] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:00:55 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/56
Oct 11 03:00:55 IQ138000 NetworkManager[404]: <info>  [1760151655.5781] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:00:55 IQ138000 NetworkManager[404]: <info>  [1760151655.5791] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:00:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:00:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:00:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:00:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:00:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:00:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:00:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:00:59 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:01:00 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:01:00 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:01:00 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:01:00 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:01:00 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:01:00 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:01:00 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:01:00 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:01:00 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:01:00 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:01:00 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:01:00 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:01:00 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:01:00 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:01:00 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:01:00 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:01:00 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:01:00 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:01:00 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:01:00 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:01:00 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:01:00 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:01:00 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:01:00 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:01:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:01:00 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:01:00 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:01:00 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:01:00 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:01:00 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:01:00 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:01:00 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:01:00 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:01:00 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:01:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:01 IQ138000 NetworkManager[404]: <info>  [1760151661.9878] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:01:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:01:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:01:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:01:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:01:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:01:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:23 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:01:23 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:01:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:30 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:01:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:30 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:01:30 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:01:30 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:01:30 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:01:30 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:01:30 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:01:30 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:01:30 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:01:30 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:01:30 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:01:30 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:01:30 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:01:30 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:01:30 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:01:30 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:01:30 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:01:30 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:01:30 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:01:30 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:01:30 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:01:30 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:01:30 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:01:30 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:01:30 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:01:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:01:30 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:01:30 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:01:30 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:01:30 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:01:30 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:01:30 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:01:30 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:01:30 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:01:30 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:01:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:01:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:42 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:01:42 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:01:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:01:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:47 IQ138000 wb-watchdog[22060]: [INFO] Interval #75 started. Waiting up to 60 seconds for error...
Oct 11 03:01:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:48 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:01:48 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:01:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.2671] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.2691] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.2703] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.2811] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.2834] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.2853] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3000] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3022] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3040] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3043] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3045] Config: added 'scan_ssid' value '1'
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3045] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3047] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3048] Config: added 'psk' value '<hidden>'
Oct 11 03:01:57 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/57
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3793] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:01:57 IQ138000 NetworkManager[404]: <info>  [1760151717.3795] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:01:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:00 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:02:00 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:02:00 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:02:00 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:02:00 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:02:00 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:02:00 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:02:00 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:02:00 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:02:00 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:02:00 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:02:00 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:02:00 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:02:00 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:02:00 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:02:00 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:02:00 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:02:00 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:02:00 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:02:00 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:02:00 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:02:00 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:02:00 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:02:00 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:02:00 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:02:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:02:00 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:02:00 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:02:00 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:02:00 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:02:00 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:02:00 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:02:00 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:02:00 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:02:00 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:02:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:02:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:02:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:02:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:02:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:15 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:02:15 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:02:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:02:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:02:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:02:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:22 IQ138000 NetworkManager[404]: <warn>  [1760151742.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:02:22 IQ138000 NetworkManager[404]: <info>  [1760151742.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:02:22 IQ138000 NetworkManager[404]: <warn>  [1760151742.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:02:22 IQ138000 NetworkManager[404]: <info>  [1760151742.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:02:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/57
Oct 11 03:02:22 IQ138000 NetworkManager[404]: <info>  [1760151742.5736] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:02:22 IQ138000 NetworkManager[404]: <info>  [1760151742.5738] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:02:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:02:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:02:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:28 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:02:28 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:02:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:02:29 IQ138000 NetworkManager[404]: <info>  [1760151749.0305] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:02:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:02:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:02:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:30 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:02:30 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:02:30 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:02:30 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:02:30 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:02:30 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:02:30 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:02:30 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:02:30 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:02:30 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:02:30 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:02:30 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:02:30 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:02:30 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:02:30 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:02:30 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:02:30 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:02:30 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:02:30 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:02:30 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:02:30 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:02:30 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:02:30 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:02:30 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:02:30 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:02:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:02:30 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:02:30 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:02:30 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:02:30 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:02:30 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:02:30 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:02:30 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:02:30 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:02:30 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:02:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:02:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:02:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:02:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:02:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:02:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:47 IQ138000 wb-watchdog[22748]: [INFO] Interval #76 started. Waiting up to 60 seconds for error...
Oct 11 03:02:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:03:00 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:03:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:00 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:03:00 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:03:00 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:03:00 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:03:00 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:03:00 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:03:00 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:03:00 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:03:00 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:03:00 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:03:00 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:03:00 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:03:00 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:03:00 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:03:00 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:03:00 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:03:00 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:03:00 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:03:00 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:03:00 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:03:00 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:03:00 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:03:00 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:03:00 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:03:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:00 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:03:00 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:03:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:01 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:03:01 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:03:01 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:03:01 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:03:01 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:03:01 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:03:01 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:03:01 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:03:01 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:03:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:03:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:03:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:03:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:03:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:03:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:03:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2774] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2789] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2806] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2873] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2892] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2894] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.2992] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3020] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3048] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3051] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3055] Config: added 'scan_ssid' value '1'
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3058] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3059] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3060] Config: added 'psk' value '<hidden>'
Oct 11 03:03:24 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/58
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3879] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:03:24 IQ138000 NetworkManager[404]: <info>  [1760151804.3881] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:03:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:03:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:03:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:03:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:03:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:03:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:03:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:03:31 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:03:31 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:03:31 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:03:31 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:03:31 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:03:31 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:03:31 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:03:31 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:03:31 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:03:31 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:03:31 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:03:31 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:03:31 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:03:31 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:03:31 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:03:31 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:03:31 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:03:31 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:03:31 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:03:31 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:03:31 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:03:31 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:03:31 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:03:31 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:03:31 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:03:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:03:31 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:03:31 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:03:31 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:03:31 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:03:31 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:03:31 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:03:31 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:03:31 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:03:31 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:03:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:03:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:03:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:03:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:03:47 IQ138000 wb-watchdog[23369]: [INFO] Interval #77 started. Waiting up to 60 seconds for error...
Oct 11 03:03:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:49 IQ138000 NetworkManager[404]: <warn>  [1760151829.5300] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:03:49 IQ138000 NetworkManager[404]: <info>  [1760151829.5302] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:03:49 IQ138000 NetworkManager[404]: <warn>  [1760151829.5333] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:03:49 IQ138000 NetworkManager[404]: <info>  [1760151829.5361] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:03:49 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/58
Oct 11 03:03:49 IQ138000 NetworkManager[404]: <info>  [1760151829.5792] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:03:49 IQ138000 NetworkManager[404]: <info>  [1760151829.5794] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:03:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:03:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:56 IQ138000 NetworkManager[404]: <info>  [1760151836.0894] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:03:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:04:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:04:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:04:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:01 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:04:01 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:04:01 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:04:01 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:04:01 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:04:01 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:04:01 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:04:01 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:04:01 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:04:01 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:04:01 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:04:01 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:04:01 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:04:01 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:04:01 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:04:01 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:04:01 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:04:01 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:04:01 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:04:01 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:04:01 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:04:01 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:04:01 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:04:01 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:04:01 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:04:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:04:01 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:04:01 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:04:01 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:04:01 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:04:01 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:04:01 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:04:01 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:04:01 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:04:01 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:04:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:04:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:04:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:04:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:04:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:04:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:04:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:04:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:04:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:04:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:04:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:04:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:04:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:31 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:04:31 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:04:31 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:04:31 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:04:31 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:04:31 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:04:31 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:04:31 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:04:31 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:04:31 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:04:31 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:04:31 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:04:31 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:04:31 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:04:31 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:04:31 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:04:31 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:04:31 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:04:31 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:04:31 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:04:31 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:04:31 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:04:31 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:04:31 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:04:31 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:04:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:04:31 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:04:31 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:04:31 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:04:31 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:04:31 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:04:31 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:04:31 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:04:31 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:04:31 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:04:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:47 IQ138000 wb-watchdog[24078]: [INFO] Interval #78 started. Waiting up to 60 seconds for error...
Oct 11 03:04:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.2962] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.2981] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.2995] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3092] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3116] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3118] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3240] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3264] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3300] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3303] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3304] Config: added 'scan_ssid' value '1'
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3305] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3306] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3307] Config: added 'psk' value '<hidden>'
Oct 11 03:04:51 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/59
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.3999] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:04:51 IQ138000 NetworkManager[404]: <info>  [1760151891.4001] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:04:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:04:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:04:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:04:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:04:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:04:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:04:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:04:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:05:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:05:01 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:05:01 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:05:01 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:05:01 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:05:01 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:05:01 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:05:01 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:05:01 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:05:01 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:05:01 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:05:01 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:05:01 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:05:01 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:05:01 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:05:01 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:05:01 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:05:01 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:05:01 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:05:01 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:05:01 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:05:01 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:05:01 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:05:01 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:05:01 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:05:01 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:05:01 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:05:01 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:05:01 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:05:01 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:05:01 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:05:01 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:05:01 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:05:01 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:05:01 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:05:01 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:05:01 IQ138000 CRON[24275]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:05:01 IQ138000 CRON[24281]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 03:05:01 IQ138000 CRON[24275]: pam_unix(cron:session): session closed for user root
Oct 11 03:05:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:05:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:05:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:16 IQ138000 NetworkManager[404]: <warn>  [1760151916.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:05:16 IQ138000 NetworkManager[404]: <info>  [1760151916.5313] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:05:16 IQ138000 NetworkManager[404]: <warn>  [1760151916.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:05:16 IQ138000 NetworkManager[404]: <info>  [1760151916.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:05:16 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/59
Oct 11 03:05:16 IQ138000 NetworkManager[404]: <info>  [1760151916.5788] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:05:16 IQ138000 NetworkManager[404]: <info>  [1760151916.5791] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:05:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:23 IQ138000 NetworkManager[404]: <info>  [1760151923.0922] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:31 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:05:31 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:05:31 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:05:31 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:05:31 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:05:31 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:05:31 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:05:31 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:05:31 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:05:31 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:05:31 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:05:31 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:05:31 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:05:31 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:05:31 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:05:31 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:05:31 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:05:31 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:05:31 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:05:31 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:05:31 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:05:31 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:05:31 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:05:31 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:05:31 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:05:31 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:05:31 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:05:31 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:05:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:05:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:05:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:05:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:05:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:05:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:05:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:05:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:05:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:05:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:05:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:05:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:05:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:47 IQ138000 wb-watchdog[24686]: [INFO] Interval #79 started. Waiting up to 60 seconds for error...
Oct 11 03:05:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:05:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:05:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:05:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:06:02 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:06:02 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:06:02 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:06:02 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:06:02 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:06:02 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:06:02 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:06:02 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:06:02 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:06:02 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:06:02 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:06:02 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:06:02 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:06:02 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:06:02 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:06:02 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:06:02 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:06:02 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:06:02 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:06:02 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:06:02 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:06:02 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:06:02 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:06:02 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:06:02 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:06:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:06:02 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:06:02 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:06:02 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:06:02 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:06:02 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:06:02 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:06:02 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:06:02 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:06:02 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:06:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:06:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:06:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:06:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:06:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:06:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4144] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4149] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4154] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4279] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4351] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4353] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4451] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4470] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4492] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4496] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4498] Config: added 'scan_ssid' value '1'
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4499] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4502] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.4505] Config: added 'psk' value '<hidden>'
Oct 11 03:06:18 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/60
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.5256] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:06:18 IQ138000 NetworkManager[404]: <info>  [1760151978.5258] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:06:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:06:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:06:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:06:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:06:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:06:32 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:06:32 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:06:32 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:06:32 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:06:32 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:06:32 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:06:32 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:06:32 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:06:32 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:06:32 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:06:32 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:06:32 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:06:32 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:06:32 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:06:32 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:06:32 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:06:32 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:06:32 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:06:32 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:06:32 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:06:32 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:06:32 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:06:32 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:06:32 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:06:32 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:06:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:06:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:06:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:06:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:06:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:06:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:06:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:06:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:06:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:06:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:06:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:06:43 IQ138000 NetworkManager[404]: <warn>  [1760152003.5319] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:06:43 IQ138000 NetworkManager[404]: <info>  [1760152003.5321] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:06:43 IQ138000 NetworkManager[404]: <warn>  [1760152003.5351] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:06:43 IQ138000 NetworkManager[404]: <info>  [1760152003.5368] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:06:43 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/60
Oct 11 03:06:43 IQ138000 NetworkManager[404]: <info>  [1760152003.5766] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:06:43 IQ138000 NetworkManager[404]: <info>  [1760152003.5781] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:06:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:06:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:06:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:06:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:47 IQ138000 wb-watchdog[25399]: [INFO] Interval #80 started. Waiting up to 60 seconds for error...
Oct 11 03:06:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:49 IQ138000 NetworkManager[404]: <info>  [1760152009.1860] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:06:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:06:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:06:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:02 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:07:02 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:07:02 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:07:02 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:07:02 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:07:02 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:07:02 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:07:02 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:07:02 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:07:02 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:07:02 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:07:02 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:07:02 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:07:02 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:07:02 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:07:02 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:07:02 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:07:02 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:07:02 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:07:02 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:07:02 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:07:02 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:07:02 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:07:02 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:07:02 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:07:02 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:07:02 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:07:02 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:07:02 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:07:02 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:07:02 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:07:02 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:07:02 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:07:02 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:07:02 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:07:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:07:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:07:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:09 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:07:09 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:07:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:07:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:07:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:07:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:07:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:07:32 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:07:32 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:07:32 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:07:32 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:07:32 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:07:32 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:07:32 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:07:32 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:07:32 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:07:32 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:07:32 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:07:32 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:07:32 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:07:32 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:07:32 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:07:32 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:07:32 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:07:32 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:07:32 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:07:32 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:07:32 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:07:32 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:07:32 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:07:32 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:07:32 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:07:32 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:07:32 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:07:32 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:07:32 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:07:32 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:07:32 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:07:32 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:07:32 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:07:32 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:07:32 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:07:32 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:07:32 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:07:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:07:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4143] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4148] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4153] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4205] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4223] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4225] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4322] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4344] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4363] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4366] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4367] Config: added 'scan_ssid' value '1'
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4368] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4370] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.4371] Config: added 'psk' value '<hidden>'
Oct 11 03:07:44 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/61
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.5118] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:07:44 IQ138000 NetworkManager[404]: <info>  [1760152064.5120] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:07:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:47 IQ138000 wb-watchdog[26001]: [INFO] Interval #81 started. Waiting up to 60 seconds for error...
Oct 11 03:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:07:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:07:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:07:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:07:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:07:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:07:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:07:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:02 IQ138000 CRON[26221]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:08:02 IQ138000 CRON[26225]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 03:08:02 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:08:02 IQ138000 sSMTP[26236]: Unable to locate mail
Oct 11 03:08:02 IQ138000 sSMTP[26236]: Cannot open mail:25
Oct 11 03:08:03 IQ138000 cron[26236]: sendmail: Cannot open mail:25
Oct 11 03:08:03 IQ138000 CRON[26221]: (root) MAIL (mailed 368 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 03:08:03 IQ138000 CRON[26221]: pam_unix(cron:session): session closed for user root
Oct 11 03:08:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:08:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:08:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:08:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:08:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:08:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:08:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:08:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:08:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:08:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:08:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:08:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:08:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:08:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:08:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:08:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:08:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:08:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:08:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:08:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:08:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:08:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:08:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:08:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:08:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:08:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:08:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:08:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:08:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:08:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:08:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:08:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:08:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:08:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:08:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:08 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:08:08 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:08:09 IQ138000 NetworkManager[404]: <warn>  [1760152089.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:08:09 IQ138000 NetworkManager[404]: <info>  [1760152089.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:08:09 IQ138000 NetworkManager[404]: <warn>  [1760152089.5364] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:08:09 IQ138000 NetworkManager[404]: <info>  [1760152089.5381] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:08:09 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/61
Oct 11 03:08:09 IQ138000 NetworkManager[404]: <info>  [1760152089.5802] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:08:09 IQ138000 NetworkManager[404]: <info>  [1760152089.5804] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:08:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:15 IQ138000 NetworkManager[404]: <info>  [1760152095.2024] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:08:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:08:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:08:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:08:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:08:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:08:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:08:33 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:08:33 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:08:33 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:08:33 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:08:33 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:08:33 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:08:33 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:08:33 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:08:33 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:08:33 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:08:33 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:08:33 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:08:33 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:08:33 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:08:33 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:08:33 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:08:33 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:08:33 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:08:33 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:08:33 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:08:33 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:08:33 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:08:33 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:08:33 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:08:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:08:33 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:08:33 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:08:33 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:08:33 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:08:33 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:08:33 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:08:33 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:08:33 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:08:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:08:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:08:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:08:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:08:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:47 IQ138000 wb-watchdog[26729]: [INFO] Interval #82 started. Waiting up to 60 seconds for error...
Oct 11 03:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:08:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:08:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:08:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:08:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:08:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:08:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:08:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:08:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:09:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:09:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:09:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:09:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:09:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:09:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:09:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:09:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:09:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:09:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:09:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:09:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:09:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:09:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:09:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:09:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:09:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:09:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:09:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:09:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:09:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:09:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:09:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:09:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:09:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:09:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:09:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:09:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:09:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:09:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:09:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:09:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:09:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:09:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:09:08 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:09:08 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:09:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3674] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3695] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3716] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3786] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3808] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3810] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3910] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3942] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3982] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3992] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3994] Config: added 'scan_ssid' value '1'
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3995] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3996] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.3997] Config: added 'psk' value '<hidden>'
Oct 11 03:09:10 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/62
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.4749] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:09:10 IQ138000 NetworkManager[404]: <info>  [1760152150.4751] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:09:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:09:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:09:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:09:33 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:09:33 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:09:33 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:09:33 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:09:33 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:09:33 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:09:33 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:09:33 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:09:33 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:09:33 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:09:33 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:09:33 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:09:33 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:09:33 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:09:33 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:09:33 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:09:33 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:09:33 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:09:33 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:09:33 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:09:33 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:09:33 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:09:33 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:09:33 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:09:33 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:09:33 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:09:33 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:09:33 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:09:33 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:09:33 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:09:33 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:09:33 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:09:33 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:09:33 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:09:33 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:09:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:09:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:09:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:09:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:35 IQ138000 NetworkManager[404]: <warn>  [1760152175.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:09:35 IQ138000 NetworkManager[404]: <info>  [1760152175.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:09:35 IQ138000 NetworkManager[404]: <warn>  [1760152175.5351] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:09:35 IQ138000 NetworkManager[404]: <info>  [1760152175.5359] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:09:35 IQ138000 NetworkManager[404]: <info>  [1760152175.5360] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:09:35 IQ138000 NetworkManager[404]: <info>  [1760152175.5400] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:09:35 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/62
Oct 11 03:09:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:42 IQ138000 NetworkManager[404]: <info>  [1760152182.1107] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:09:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:09:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:47 IQ138000 wb-watchdog[27352]: [INFO] Interval #83 started. Waiting up to 60 seconds for error...
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 03:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 03:09:51 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 03:09:51 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 03:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:09:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:09:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:09:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:09:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:09:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:09:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:09:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:01 IQ138000 CRON[27537]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:10:01 IQ138000 CRON[27542]: (root) CMD (test -e /run/systemd/system || SERVICE_MODE=1 /sbin/e2scrub_all -A -r)
Oct 11 03:10:01 IQ138000 CRON[27537]: pam_unix(cron:session): session closed for user root
Oct 11 03:10:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:10:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:10:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:10:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:10:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:10:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:10:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:10:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:10:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:10:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:10:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:10:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:10:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:10:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:10:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:10:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:10:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:10:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:10:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:10:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:10:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:10:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:10:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:10:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:10:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:10:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:10:03 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:10:03 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:10:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:10:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:10:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:10:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:10:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:10:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:10:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:10:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:10:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:10:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L3, row count 7183, limit 7042
Oct 11 03:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:10:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:10:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:10:34 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:10:34 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:10:34 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:10:34 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:10:34 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:10:34 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:10:34 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:10:34 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:10:34 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:10:34 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:10:34 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:10:34 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:10:34 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:10:34 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:10:34 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:10:34 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:10:34 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:10:34 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:10:34 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:10:34 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:10:34 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:10:34 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:10:34 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:10:34 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:10:34 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:10:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:10:34 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:10:34 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:10:34 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:10:34 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:10:34 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:10:34 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:10:34 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:10:34 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:10:34 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:10:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:10:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3630] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3653] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3677] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3750] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3787] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3796] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3904] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3939] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3968] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3983] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3991] Config: added 'scan_ssid' value '1'
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3992] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3994] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.3995] Config: added 'psk' value '<hidden>'
Oct 11 03:10:37 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/63
Oct 11 03:10:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.4703] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:10:37 IQ138000 NetworkManager[404]: <info>  [1760152237.4705] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:10:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:10:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:10:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:10:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:10:47 IQ138000 wb-watchdog[28043]: [INFO] Interval #84 started. Waiting up to 60 seconds for error...
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:10:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:10:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:10:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:10:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:11:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:02 IQ138000 NetworkManager[404]: <warn>  [1760152262.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:11:02 IQ138000 NetworkManager[404]: <info>  [1760152262.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:11:02 IQ138000 NetworkManager[404]: <warn>  [1760152262.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:11:02 IQ138000 NetworkManager[404]: <info>  [1760152262.5356] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:11:02 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/63
Oct 11 03:11:02 IQ138000 NetworkManager[404]: <info>  [1760152262.5746] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:11:02 IQ138000 NetworkManager[404]: <info>  [1760152262.5748] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:11:04 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:11:04 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:11:04 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:11:04 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:11:04 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:11:04 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:11:04 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:11:04 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:11:04 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:11:04 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:11:04 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:11:04 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:11:04 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:11:04 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:11:04 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:11:04 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:11:04 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:11:04 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:11:04 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:11:04 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:11:04 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:11:04 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:11:04 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:11:04 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:11:04 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:11:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:11:04 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:11:04 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:11:04 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:11:04 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:11:04 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:11:04 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:11:04 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:11:04 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:11:04 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:11:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:09 IQ138000 NetworkManager[404]: <info>  [1760152269.1182] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:11:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:11:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:11:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:11:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:11:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:34 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:11:34 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:11:34 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:11:34 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:11:34 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:11:34 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:11:34 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:11:34 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:11:34 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:11:34 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:11:34 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:11:34 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:11:34 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:11:34 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:11:34 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:11:34 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:11:34 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:11:34 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:11:34 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:11:34 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:11:34 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:11:34 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:11:34 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:11:34 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:11:34 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:11:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:11:34 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:11:34 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:11:34 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:11:34 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:11:34 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:11:34 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:11:34 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:11:34 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:11:34 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:11:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:47 IQ138000 wb-watchdog[28661]: [INFO] Interval #85 started. Waiting up to 60 seconds for error...
Oct 11 03:11:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 03:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:11:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:11:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:12:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4665] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4683] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4692] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4749] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4768] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4770] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4896] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4919] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4949] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4953] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4954] Config: added 'scan_ssid' value '1'
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4955] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4956] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.4957] Config: added 'psk' value '<hidden>'
Oct 11 03:12:04 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/64
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.5748] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:12:04 IQ138000 NetworkManager[404]: <info>  [1760152324.5750] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:12:04 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:12:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:04 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:12:04 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:12:04 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:12:04 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:12:04 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:12:04 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:12:04 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:12:04 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:12:04 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:12:04 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:12:04 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:12:04 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:12:04 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:12:04 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:12:04 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:12:04 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:12:04 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:12:04 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:12:04 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:12:04 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:12:04 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:12:04 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:12:04 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:12:04 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:12:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:12:04 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:12:04 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:12:04 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:12:04 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:12:04 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:12:04 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:12:04 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:12:04 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:12:04 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:12:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:12:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:12:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:12:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:12:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:12:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:12:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:12:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:12:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:12:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:12:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:12:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:12:29 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:12:29 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:12:29 IQ138000 NetworkManager[404]: <warn>  [1760152349.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:12:29 IQ138000 NetworkManager[404]: <info>  [1760152349.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:12:29 IQ138000 NetworkManager[404]: <warn>  [1760152349.5340] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:12:29 IQ138000 NetworkManager[404]: <info>  [1760152349.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:12:29 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/64
Oct 11 03:12:29 IQ138000 NetworkManager[404]: <info>  [1760152349.5818] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:12:29 IQ138000 NetworkManager[404]: <info>  [1760152349.5819] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:12:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:34 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:12:34 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:12:34 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:12:34 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:12:34 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:12:34 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:12:34 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:12:34 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:12:34 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:12:34 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:12:34 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:12:34 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:12:34 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:12:34 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:12:34 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:12:34 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:12:34 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:12:34 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:12:34 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:12:34 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:12:34 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:12:34 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:12:34 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:12:34 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:12:34 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:12:34 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:12:34 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:12:34 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:12:35 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:12:35 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:12:35 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:12:35 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:12:35 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:12:35 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:12:35 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:12:35 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:12:35 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:12:35 IQ138000 NetworkManager[404]: <info>  [1760152355.2478] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:12:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:12:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:12:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:12:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:12:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:12:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:47 IQ138000 wb-watchdog[29362]: [INFO] Interval #86 started. Waiting up to 60 seconds for error...
Oct 11 03:12:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:12:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:12:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:12:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:12:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:12:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:12:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 03:12:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 03:12:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 03:12:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 03:12:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:12:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:13:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:13:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:13:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:13:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:13:05 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:13:05 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:13:05 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:13:05 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:13:05 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:13:05 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:13:05 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:13:05 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:13:05 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:13:05 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:13:05 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:13:05 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:13:05 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:13:05 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:13:05 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:13:05 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:13:05 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:13:05 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:13:05 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:13:05 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:13:05 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:13:05 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:13:05 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:13:05 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:13:05 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:13:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:13:05 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:13:05 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:13:05 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:13:05 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:13:05 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:13:05 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:13:05 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:13:05 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:13:05 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:13:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:13:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:13:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:13:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:13:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:13:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:13:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:13:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:13:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:13:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4411] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4416] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4422] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4506] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4541] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4543] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4639] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4672] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4700] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4714] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4725] Config: added 'scan_ssid' value '1'
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4732] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4740] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.4746] Config: added 'psk' value '<hidden>'
Oct 11 03:13:30 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/65
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.5435] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:13:30 IQ138000 NetworkManager[404]: <info>  [1760152410.5437] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:13:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:13:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:35 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:13:35 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:13:35 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:13:35 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:13:35 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:13:35 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:13:35 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:13:35 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:13:35 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:13:35 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:13:35 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:13:35 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:13:35 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:13:35 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:13:35 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:13:35 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:13:35 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:13:35 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:13:35 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:13:35 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:13:35 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:13:35 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:13:35 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:13:35 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:13:35 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:13:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:13:35 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:13:35 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:13:35 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:13:35 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:13:35 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:13:35 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:13:35 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:13:35 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:13:35 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:13:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:13:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:13:47 IQ138000 wb-watchdog[29978]: [INFO] Interval #87 started. Waiting up to 60 seconds for error...
Oct 11 03:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:13:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:13:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4870 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:13:55 IQ138000 NetworkManager[404]: <warn>  [1760152435.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:13:55 IQ138000 NetworkManager[404]: <info>  [1760152435.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:13:55 IQ138000 NetworkManager[404]: <warn>  [1760152435.5340] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:13:55 IQ138000 NetworkManager[404]: <info>  [1760152435.5356] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:13:55 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/65
Oct 11 03:13:55 IQ138000 NetworkManager[404]: <info>  [1760152435.5782] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:13:55 IQ138000 NetworkManager[404]: <info>  [1760152435.5784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:13:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:13:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:13:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:13:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:13:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:01 IQ138000 NetworkManager[404]: <info>  [1760152441.2511] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:14:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:14:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:05 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:14:05 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:14:05 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:14:05 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:14:05 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:14:05 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:14:05 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:14:05 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:14:05 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:14:05 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:14:05 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:14:05 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:14:05 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:14:05 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:14:05 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:14:05 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:14:05 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:14:05 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:14:05 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:14:05 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:14:05 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:14:05 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:14:05 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:14:05 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:14:05 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:14:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:14:05 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:14:05 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:14:05 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:14:05 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:14:05 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:14:05 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:14:05 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:14:05 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:14:05 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:14:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:14:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:14:09 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:14:09 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:14:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:14:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:14:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L2, row count 7183, limit 7042
Oct 11 03:14:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:14:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:14:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:14:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:14:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:14:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:14:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:14:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:14:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:14:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:14:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:14:26 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:14:26 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:14:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:35 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:14:35 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:14:35 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:14:35 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:14:35 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:14:35 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:14:35 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:14:35 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:14:35 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:14:35 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:14:35 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:14:35 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:14:35 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:14:35 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:14:35 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:14:35 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:14:35 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:14:35 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:14:35 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:14:35 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:14:35 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:14:35 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:14:35 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:14:35 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:14:35 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:14:35 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:14:35 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:14:35 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:14:35 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:14:35 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:14:35 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:14:35 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:14:35 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:14:35 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:14:35 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:14:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:14:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:14:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:14:39 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:14:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:47 IQ138000 wb-watchdog[30687]: [INFO] Interval #88 started. Waiting up to 60 seconds for error...
Oct 11 03:14:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:14:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:14:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:14:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:14:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:14:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:14:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:14:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:14:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:14:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:14:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4276] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4281] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4287] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4342] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4361] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4363] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4502] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4532] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4562] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4575] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4576] Config: added 'scan_ssid' value '1'
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4577] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4580] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.4581] Config: added 'psk' value '<hidden>'
Oct 11 03:14:56 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/66
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.5432] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:14:56 IQ138000 NetworkManager[404]: <info>  [1760152496.5434] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:14:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:14:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:15:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:15:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:15:01 IQ138000 CRON[30875]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:15:01 IQ138000 CRON[30880]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 03:15:01 IQ138000 CRON[30875]: pam_unix(cron:session): session closed for user root
Oct 11 03:15:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:05 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:15:05 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:15:05 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:15:05 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:15:05 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:15:05 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:15:05 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:15:05 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:15:05 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:15:05 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:15:05 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:15:05 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:15:05 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:15:05 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:15:05 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:15:05 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:15:05 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:15:05 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:15:05 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:15:05 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:15:05 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:15:05 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:15:05 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:15:05 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:05 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:15:05 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:15:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:15:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:15:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:15:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:15:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:15:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:15:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:15:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:15:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:15:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:15:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:15:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:15:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:15:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:15:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:21 IQ138000 NetworkManager[404]: <warn>  [1760152521.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:15:21 IQ138000 NetworkManager[404]: <info>  [1760152521.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:15:21 IQ138000 NetworkManager[404]: <warn>  [1760152521.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:15:21 IQ138000 NetworkManager[404]: <info>  [1760152521.5351] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:15:21 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/66
Oct 11 03:15:21 IQ138000 NetworkManager[404]: <info>  [1760152521.5757] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:15:21 IQ138000 NetworkManager[404]: <info>  [1760152521.5759] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:15:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:15:27 IQ138000 NetworkManager[404]: <info>  [1760152527.1671] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:15:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:15:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:15:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:15:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:15:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:15:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:15:36 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:15:36 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:15:36 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:15:36 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:15:36 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:15:36 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:15:36 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:15:36 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:15:36 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:15:36 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:15:36 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:15:36 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:15:36 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:15:36 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:15:36 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:15:36 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:15:36 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:15:36 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:15:36 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:15:36 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:15:36 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:15:36 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:15:36 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:15:36 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:15:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:15:36 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:15:36 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:15:36 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:15:36 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:15:36 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:15:36 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:15:36 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:15:36 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:15:36 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:15:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:15:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:15:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:15:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:47 IQ138000 wb-watchdog[31299]: [INFO] Interval #89 started. Waiting up to 60 seconds for error...
Oct 11 03:15:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:15:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:15:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:15:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:15:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:15:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:15:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:15:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:15:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:15:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:15:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:15:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:15:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:15:59 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:15:59 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:16:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:16:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:16:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:16:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:16:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:16:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:16:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:16:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:16:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:16:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:16:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:16:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:16:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:16:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:16:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:16:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:16:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:16:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:16:06 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:16:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:16:06 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:16:06 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:16:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:16:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:16:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:16:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:16:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:16:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:16:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:16:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:16:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:16:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:16:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:16:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:16:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:16:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:16:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:16:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:16:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:16:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:16:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:16:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:16:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:16:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L2, row count 7183, limit 7042
Oct 11 03:16:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:16:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.3828] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.3834] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.3840] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.3947] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.3972] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.3974] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4103] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4125] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4146] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4149] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4150] Config: added 'scan_ssid' value '1'
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4151] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4152] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4153] Config: added 'psk' value '<hidden>'
Oct 11 03:16:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/67
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4898] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:16:22 IQ138000 NetworkManager[404]: <info>  [1760152582.4900] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:16:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:16:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:16:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:16:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:16:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:16:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:16:36 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:16:36 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:16:36 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:16:36 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:16:36 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:16:36 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:16:36 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:16:36 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:16:36 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:16:36 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:16:36 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:16:36 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:16:36 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:16:36 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:16:36 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:16:36 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:16:36 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:16:36 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:16:36 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:16:36 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:16:36 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:16:36 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:16:36 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:16:36 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:16:36 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:16:36 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:16:36 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:16:36 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:16:36 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:16:36 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:16:36 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:16:36 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:16:36 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:16:36 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:16:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:16:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:47 IQ138000 wb-watchdog[32005]: [INFO] Interval #90 started. Waiting up to 60 seconds for error...
Oct 11 03:16:47 IQ138000 NetworkManager[404]: <warn>  [1760152607.5310] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:16:47 IQ138000 NetworkManager[404]: <info>  [1760152607.5312] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:16:47 IQ138000 NetworkManager[404]: <warn>  [1760152607.5343] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:16:47 IQ138000 NetworkManager[404]: <info>  [1760152607.5357] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:16:47 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/67
Oct 11 03:16:47 IQ138000 NetworkManager[404]: <info>  [1760152607.5801] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:16:47 IQ138000 NetworkManager[404]: <info>  [1760152607.5803] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:16:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:16:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:53 IQ138000 NetworkManager[404]: <info>  [1760152613.1685] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:16:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:16:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:16:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:16:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:16:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:16:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:16:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:16:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:16:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:16:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:16:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:16:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:17:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:01 IQ138000 CRON[32194]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:17:01 IQ138000 CRON[32199]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 03:17:01 IQ138000 CRON[32194]: pam_unix(cron:session): session closed for user root
Oct 11 03:17:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:17:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:17:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:06 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:17:06 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:17:06 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:17:06 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:17:06 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:17:06 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:17:06 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:17:06 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:17:06 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:17:06 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:17:06 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:17:06 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:17:06 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:17:06 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:17:06 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:17:06 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:17:06 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:17:06 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:17:06 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:17:06 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:17:06 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:17:06 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:17:06 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:17:06 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:17:06 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:17:06 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:17:06 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:17:06 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:17:06 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:17:06 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:17:06 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:17:06 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:17:06 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:17:06 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:17:06 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:17:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:17:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:13 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:17:13 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:17:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 18 input(s) @ 4868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:17:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:17:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:17:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:17:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:17:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:17:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:17:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:17:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:17:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:17:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:17:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:17:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:17:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:17:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:17:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:17:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:17:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:17:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:17:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:17:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:17:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:17:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:17:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:17:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:17:37 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:17:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:17:37 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:17:37 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:17:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:17:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:17:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:17:37 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:17:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:17:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:17:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:17:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:17:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:17:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:17:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:17:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:17:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:17:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:17:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:17:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:17:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:17:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:47 IQ138000 wb-watchdog[32623]: [INFO] Interval #91 started. Waiting up to 60 seconds for error...
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4377] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4382] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4388] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4453] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4472] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4474] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4568] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4589] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4608] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4612] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4613] Config: added 'scan_ssid' value '1'
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4614] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4616] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.4617] Config: added 'psk' value '<hidden>'
Oct 11 03:17:48 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/68
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.5301] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:17:48 IQ138000 NetworkManager[404]: <info>  [1760152668.5309] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:17:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:17:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:17:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:17:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:17:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:18:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:18:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:18:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:18:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:18:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:07 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:18:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:07 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:18:07 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:18:07 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:18:07 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:18:07 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:18:07 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:18:07 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:18:07 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:18:07 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:18:07 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:18:07 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:18:07 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:18:07 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:18:07 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:18:07 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:18:07 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:18:07 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:18:07 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:18:07 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:18:07 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:18:07 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:18:07 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:18:07 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:18:07 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:18:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:18:07 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:18:07 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:18:07 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:18:07 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:18:07 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:18:07 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:18:07 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:18:07 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:18:07 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:18:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:13 IQ138000 NetworkManager[404]: <warn>  [1760152693.5315] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:18:13 IQ138000 NetworkManager[404]: <info>  [1760152693.5317] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:18:13 IQ138000 NetworkManager[404]: <warn>  [1760152693.5349] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:18:13 IQ138000 NetworkManager[404]: <info>  [1760152693.5363] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:18:13 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/68
Oct 11 03:18:13 IQ138000 NetworkManager[404]: <info>  [1760152693.5735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:18:13 IQ138000 NetworkManager[404]: <info>  [1760152693.5737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:18:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:18:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L1, row count 7183, limit 7042
Oct 11 03:18:19 IQ138000 NetworkManager[404]: <info>  [1760152699.2159] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:18:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:18:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:18:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:18:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:18:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:18:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:18:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:18:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:18:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:18:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:18:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:35 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:18:35 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:18:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:37 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:18:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:18:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:18:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:18:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:18:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:18:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:18:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:18:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:18:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:18:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:18:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:18:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:18:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:18:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:18:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:18:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:18:37 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:18:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:18:37 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:18:37 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:18:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:18:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:18:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:18:37 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:18:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:18:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:18:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:18:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:18:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:18:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:18:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:18:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:18:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:18:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:18:47 IQ138000 wb-watchdog[888]: [INFO] Interval #92 started. Waiting up to 60 seconds for error...
Oct 11 03:18:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:18:48 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:18:48 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:18:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:18:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:18:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:18:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:18:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:18:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:18:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:18:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:18:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:19:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:19:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:19:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:19:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:19:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:19:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:19:07 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:19:07 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:19:07 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:19:07 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:19:07 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:19:07 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:19:07 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:19:07 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:19:07 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:19:07 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:19:07 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:19:07 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:19:07 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:19:07 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:19:07 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:19:07 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:19:07 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:19:07 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:19:07 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:19:07 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:19:07 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:19:07 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:19:07 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:19:07 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:19:07 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:19:07 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:19:07 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:19:07 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:19:07 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:19:07 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:19:07 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:19:07 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:19:07 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:19:07 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:19:07 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:19:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.3989] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.3995] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4003] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4066] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4085] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4086] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4200] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4225] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4248] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4251] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4252] Config: added 'scan_ssid' value '1'
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4253] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4255] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4255] Config: added 'psk' value '<hidden>'
Oct 11 03:19:14 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/69
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4927] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:19:14 IQ138000 NetworkManager[404]: <info>  [1760152754.4929] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:19:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:19:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:19:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:19:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:19:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:19:29 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:19:29 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:19:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:19:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:19:37 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:19:37 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:19:37 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:19:37 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:19:37 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:19:37 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:19:37 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:19:37 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:19:37 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:19:37 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:19:37 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:19:37 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:19:37 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:19:37 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:19:37 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:19:37 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:19:37 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:19:37 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:19:37 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:19:37 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:19:37 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:19:37 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:19:37 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:19:37 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:19:37 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:19:37 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:19:37 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:19:37 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:19:37 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:19:37 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:19:37 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:19:37 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:19:37 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:19:37 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:19:37 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:19:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:39 IQ138000 NetworkManager[404]: <warn>  [1760152779.5309] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:19:39 IQ138000 NetworkManager[404]: <info>  [1760152779.5311] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:19:39 IQ138000 NetworkManager[404]: <warn>  [1760152779.5338] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:19:39 IQ138000 NetworkManager[404]: <info>  [1760152779.5350] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:19:39 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/69
Oct 11 03:19:39 IQ138000 NetworkManager[404]: <info>  [1760152779.5786] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:19:39 IQ138000 NetworkManager[404]: <info>  [1760152779.5788] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:19:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:45 IQ138000 NetworkManager[404]: <info>  [1760152785.1802] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:19:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:19:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:47 IQ138000 wb-watchdog[1504]: [INFO] Interval #93 started. Waiting up to 60 seconds for error...
Oct 11 03:19:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:19:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:19:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:19:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:19:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:19:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:19:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:20:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:20:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:20:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:08 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:20:08 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:20:08 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:20:08 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:20:08 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:20:08 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:20:08 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:20:08 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:20:08 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:20:08 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:20:08 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:20:08 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:20:08 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:20:08 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:20:08 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:20:08 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:20:08 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:20:08 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:20:08 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:20:08 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:20:08 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:20:08 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:20:08 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:20:08 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:20:08 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:20:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:20:08 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:20:08 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:20:08 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:20:08 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:20:08 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:20:08 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:20:08 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:20:08 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:20:08 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:20:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:20:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:20:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:20:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:20:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:20:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:20:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:20:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:20:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:20:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:20:38 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:20:38 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:20:38 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:20:38 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:20:38 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:20:38 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:20:38 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:20:38 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:20:38 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:20:38 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:20:38 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:20:38 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:20:38 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:20:38 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:20:38 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:20:38 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:20:38 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:20:38 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:20:38 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:20:38 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:20:38 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:20:38 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:20:38 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:20:38 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:20:38 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:20:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:20:38 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:20:38 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:20:38 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:20:38 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:20:38 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:20:38 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:20:38 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:20:38 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:20:38 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:20:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5594] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5611] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5618] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5695] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5724] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:20:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5828] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5856] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5876] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5889] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5891] Config: added 'scan_ssid' value '1'
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5892] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5893] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.5894] Config: added 'psk' value '<hidden>'
Oct 11 03:20:40 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/70
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.6659] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:20:40 IQ138000 NetworkManager[404]: <info>  [1760152840.6663] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:20:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:20:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:47 IQ138000 wb-watchdog[2255]: [INFO] Interval #94 started. Waiting up to 60 seconds for error...
Oct 11 03:20:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:20:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:20:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:20:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:20:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:20:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:20:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:20:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:05 IQ138000 NetworkManager[404]: <warn>  [1760152865.5310] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:21:05 IQ138000 NetworkManager[404]: <info>  [1760152865.5312] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:21:05 IQ138000 NetworkManager[404]: <warn>  [1760152865.5343] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:21:05 IQ138000 NetworkManager[404]: <info>  [1760152865.5357] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:21:05 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/70
Oct 11 03:21:05 IQ138000 NetworkManager[404]: <info>  [1760152865.5800] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:21:05 IQ138000 NetworkManager[404]: <info>  [1760152865.5802] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:21:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:21:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:08 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:21:08 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:21:08 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:21:08 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:21:08 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:21:08 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:21:08 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:21:08 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:21:08 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:21:08 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:21:08 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:21:08 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:21:08 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:21:08 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:21:08 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:21:08 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:21:08 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:21:08 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:21:08 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:21:08 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:21:08 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:21:08 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:21:08 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:21:08 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:21:08 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:21:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:21:08 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:21:08 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:21:08 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:21:08 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:21:08 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:21:08 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:21:08 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:21:08 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:21:08 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:21:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:11 IQ138000 NetworkManager[404]: <info>  [1760152871.3602] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:21:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:21:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:21:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:21:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:21:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:21:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:21:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:38 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:21:38 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:21:38 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:21:38 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:21:38 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:21:38 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:21:38 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:21:38 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:21:38 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:21:38 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:21:38 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:21:38 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:21:38 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:21:38 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:21:38 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:21:38 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:21:38 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:21:38 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:21:38 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:21:38 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:21:38 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:21:38 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:21:38 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:21:38 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:21:38 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:21:38 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:21:38 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:21:38 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:21:38 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:21:38 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:21:38 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:21:38 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:21:38 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:21:38 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:21:38 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:21:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:21:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:21:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:21:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:21:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:21:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:47 IQ138000 wb-watchdog[2895]: [INFO] Interval #95 started. Waiting up to 60 seconds for error...
Oct 11 03:21:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:21:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:21:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:21:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:21:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:21:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:22:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5533] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5543] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5551] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5656] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5675] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5679] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5784] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5829] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5848] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5852] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5853] Config: added 'scan_ssid' value '1'
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5854] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5855] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.5856] Config: added 'psk' value '<hidden>'
Oct 11 03:22:06 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/71
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.6640] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:22:06 IQ138000 NetworkManager[404]: <info>  [1760152926.6642] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:22:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:22:08 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:22:08 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:22:08 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:22:08 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:22:08 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:22:08 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:22:08 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:22:08 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:22:08 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:22:08 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:22:08 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:22:08 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:22:08 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:22:08 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:22:08 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:22:08 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:22:08 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:22:08 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:22:08 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:22:08 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:22:08 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:22:08 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:22:08 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:22:08 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:22:08 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:22:08 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:08 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:22:08 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:22:09 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:22:09 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:22:09 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:22:09 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:22:09 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:22:09 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:22:09 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:22:09 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:22:09 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:22:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:22:12 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:22:12 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:22:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:22:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:14 IQ138000 npm[3714]: [2025-10-11 03:22:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"linkquality":72,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 03:22:14 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 03:22:14 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 03:22:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:14 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 03:22:14 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 03:22:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:22:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:31 IQ138000 NetworkManager[404]: <warn>  [1760152951.5306] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:22:31 IQ138000 NetworkManager[404]: <info>  [1760152951.5308] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:22:31 IQ138000 NetworkManager[404]: <warn>  [1760152951.5346] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:22:31 IQ138000 NetworkManager[404]: <info>  [1760152951.5361] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:22:31 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/71
Oct 11 03:22:31 IQ138000 NetworkManager[404]: <info>  [1760152951.5857] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:22:31 IQ138000 NetworkManager[404]: <info>  [1760152951.5860] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:22:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:22:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:22:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:22:37 IQ138000 NetworkManager[404]: <info>  [1760152957.3231] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:22:39 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:22:39 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:22:39 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:22:39 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:22:39 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:22:39 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:22:39 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:22:39 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:22:39 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:22:39 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:22:39 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:22:39 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:22:39 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:22:39 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:22:39 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:22:39 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:22:39 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:22:39 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:22:39 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:22:39 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:22:39 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:22:39 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:22:39 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:22:39 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:22:39 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:22:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:22:39 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:22:39 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:22:39 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:22:39 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:22:39 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:22:39 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:22:39 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:22:39 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:22:39 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:22:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:22:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:22:39 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:22:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:22:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:22:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:22:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:47 IQ138000 wb-watchdog[3612]: [INFO] Interval #96 started. Waiting up to 60 seconds for error...
Oct 11 03:22:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:22:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:22:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:22:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:22:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:22:51 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:22:51 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:22:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:22:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:22:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:22:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:22:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:22:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:22:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:22:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:23:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:23:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:23:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:23:08 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:23:08 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:23:09 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:23:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:09 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:23:09 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:23:09 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:23:09 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:23:09 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:23:09 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:23:09 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:23:09 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:23:09 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:23:09 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:23:09 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:23:09 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:23:09 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:23:09 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:23:09 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:23:09 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:23:09 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:23:09 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:23:09 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:23:09 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:23:09 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:23:09 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:23:09 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:23:09 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:23:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:23:09 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:23:09 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:23:09 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:23:09 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:23:09 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:23:09 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:23:09 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:23:09 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:23:09 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:23:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:23:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:23:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5017] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5023] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5030] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5149] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5179] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5183] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5305] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5364] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5486] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5491] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5493] Config: added 'scan_ssid' value '1'
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5494] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5495] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.5496] Config: added 'psk' value '<hidden>'
Oct 11 03:23:32 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/72
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.6331] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:23:32 IQ138000 NetworkManager[404]: <info>  [1760153012.6333] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:23:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:23:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:23:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:23:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:39 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:23:39 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:23:39 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:23:39 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:23:39 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:23:39 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:23:39 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:23:39 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:23:39 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:23:39 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:23:39 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:23:39 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:23:39 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:23:39 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:23:39 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:23:39 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:23:39 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:23:39 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:23:39 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:23:39 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:23:39 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:23:39 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:23:39 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:23:39 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:23:39 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:23:39 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:23:39 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:23:39 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:23:39 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:23:39 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:23:39 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:23:39 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:23:39 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:23:39 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:23:39 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:23:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:47 IQ138000 wb-watchdog[4248]: [INFO] Interval #97 started. Waiting up to 60 seconds for error...
Oct 11 03:23:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:23:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:23:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:23:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:23:57 IQ138000 NetworkManager[404]: <warn>  [1760153037.5316] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:23:57 IQ138000 NetworkManager[404]: <info>  [1760153037.5318] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:23:57 IQ138000 NetworkManager[404]: <warn>  [1760153037.5348] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:23:57 IQ138000 NetworkManager[404]: <info>  [1760153037.5362] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:23:57 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/72
Oct 11 03:23:57 IQ138000 NetworkManager[404]: <info>  [1760153037.5824] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:23:57 IQ138000 NetworkManager[404]: <info>  [1760153037.5826] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:23:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:23:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:24:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:24:03 IQ138000 NetworkManager[404]: <info>  [1760153043.2662] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:24:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:24:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:24:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:24:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8756 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:24:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:24:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:09 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:24:09 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:24:09 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:24:09 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:24:09 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:24:09 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:24:09 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:24:09 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:24:09 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:24:09 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:24:09 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:24:09 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:24:09 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:24:09 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:24:09 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:24:09 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:24:09 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:24:09 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:24:09 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:24:09 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:24:09 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:24:09 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:24:09 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:24:09 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:24:09 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:24:09 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:24:09 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:24:09 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:24:09 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:24:09 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:24:09 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:24:09 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:24:09 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:24:09 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:24:09 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:24:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:24:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:24:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:24:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:24:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:24:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:24:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:24:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:24:23 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:24:23 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:24:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:24:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:39 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:24:40 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:24:40 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:24:40 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:24:40 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:24:40 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:24:40 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:24:40 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:24:40 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:24:40 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:24:40 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:24:40 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:24:40 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:24:40 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:24:40 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:24:40 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:24:40 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:24:40 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:24:40 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:24:40 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:24:40 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:24:40 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:24:40 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:24:40 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:24:40 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:24:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:24:40 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:24:40 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:24:40 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:24:40 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:24:40 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:24:40 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:24:40 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:24:40 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:24:40 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:24:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:24:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:24:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:24:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:24:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:24:47 IQ138000 wb-watchdog[4993]: [INFO] Interval #98 started. Waiting up to 60 seconds for error...
Oct 11 03:24:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:24:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:24:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:24:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:24:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4204] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4251] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4266] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4330] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4371] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4375] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4499] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4530] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4547] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4550] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4551] Config: added 'scan_ssid' value '1'
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4552] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4553] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.4554] Config: added 'psk' value '<hidden>'
Oct 11 03:24:58 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/73
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.5303] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:24:58 IQ138000 NetworkManager[404]: <info>  [1760153098.5305] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:24:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:24:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:25:01 IQ138000 CRON[5186]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:25:01 IQ138000 CRON[5190]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 03:25:01 IQ138000 CRON[5186]: pam_unix(cron:session): session closed for user root
Oct 11 03:25:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:25:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:25:10 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:25:10 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:25:10 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:25:10 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:25:10 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:25:10 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:25:10 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:25:10 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:25:10 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:25:10 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:25:10 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:25:10 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:25:10 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:25:10 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:25:10 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:25:10 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:25:10 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:25:10 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:25:10 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:25:10 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:25:10 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:25:10 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:25:10 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:25:10 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:25:10 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:25:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:25:10 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:25:10 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:25:10 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:25:10 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:25:10 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:25:10 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:25:10 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:25:10 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:25:10 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:25:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:25:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:25:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:25:23 IQ138000 NetworkManager[404]: <warn>  [1760153123.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:25:23 IQ138000 NetworkManager[404]: <info>  [1760153123.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:25:23 IQ138000 NetworkManager[404]: <warn>  [1760153123.5346] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:25:23 IQ138000 NetworkManager[404]: <info>  [1760153123.5359] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:25:23 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/73
Oct 11 03:25:23 IQ138000 NetworkManager[404]: <info>  [1760153123.5780] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:25:23 IQ138000 NetworkManager[404]: <info>  [1760153123.5782] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:25:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:26 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:25:26 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:25:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:29 IQ138000 NetworkManager[404]: <info>  [1760153129.1548] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:25:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:25:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:32 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:25:32 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:25:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:25:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:25:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:25:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:25:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:25:40 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:25:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:25:40 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:25:40 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:25:40 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:25:40 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:25:40 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:25:40 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:25:40 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:25:40 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:25:40 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:25:40 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:25:40 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:25:40 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:25:40 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:25:40 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:25:40 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:25:40 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:25:40 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:25:40 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:25:40 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:25:40 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:25:40 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:25:40 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:25:40 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:25:40 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:25:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:25:40 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:25:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:40 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:25:40 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:25:40 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:25:40 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:25:40 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:25:40 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:25:40 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:25:40 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:25:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:25:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:25:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:25:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:25:47 IQ138000 wb-watchdog[5612]: [INFO] Interval #99 started. Waiting up to 60 seconds for error...
Oct 11 03:25:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:48 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:25:48 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:25:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:25:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:25:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:25:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:25:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:26:10 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:26:10 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:26:10 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:26:10 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:26:10 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:26:10 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:26:10 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:26:10 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:26:10 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:26:10 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:26:10 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:26:10 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:26:10 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:26:10 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:26:10 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:26:10 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:26:10 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:26:10 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:26:10 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:26:10 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:26:10 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:26:10 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:26:10 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:26:10 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:26:10 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:26:10 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:26:10 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:26:10 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:26:10 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:26:10 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:26:10 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:26:10 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:26:10 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:26:10 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:26:10 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:26:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:12 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:26:12 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:26:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_22/External Sensor 1, row count 7183, limit 7042
Oct 11 03:26:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:26:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.3943] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.3947] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.3953] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4010] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4051] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4054] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4156] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4179] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4198] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4201] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4202] Config: added 'scan_ssid' value '1'
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4203] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4204] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4205] Config: added 'psk' value '<hidden>'
Oct 11 03:26:24 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/74
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4955] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:26:24 IQ138000 NetworkManager[404]: <info>  [1760153184.4961] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:26:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:26:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:26:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:26:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:26:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:40 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:26:40 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:26:40 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:26:40 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:26:40 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:26:40 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:26:40 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:26:40 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:26:40 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:26:40 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:26:40 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:26:40 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:26:40 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:26:40 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:26:40 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:26:40 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:26:40 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:26:40 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:26:40 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:26:40 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:26:40 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:26:40 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:26:40 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:26:40 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:26:40 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:26:40 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:26:40 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:26:40 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:26:41 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:26:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:26:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:26:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:26:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:26:41 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:26:41 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:26:41 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:26:41 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:26:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 03:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:26:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:26:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:26:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:47 IQ138000 wb-watchdog[6351]: [INFO] Interval #100 started. Waiting up to 60 seconds for error...
Oct 11 03:26:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:26:49 IQ138000 NetworkManager[404]: <warn>  [1760153209.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:26:49 IQ138000 NetworkManager[404]: <info>  [1760153209.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:26:49 IQ138000 NetworkManager[404]: <warn>  [1760153209.5363] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:26:49 IQ138000 NetworkManager[404]: <info>  [1760153209.5379] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:26:49 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/74
Oct 11 03:26:49 IQ138000 NetworkManager[404]: <info>  [1760153209.5811] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:26:49 IQ138000 NetworkManager[404]: <info>  [1760153209.5814] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:26:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:26:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:26:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:26:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:26:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:26:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:55 IQ138000 NetworkManager[404]: <info>  [1760153215.2012] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:26:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:26:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:26:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:26:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:27:00 IQ138000 npm[3714]: [2025-10-11 03:27:00] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"linkquality":51,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 03:27:00 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 03:27:00 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 03:27:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:27:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:27:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:27:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:27:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:27:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:27:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:27:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:27:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:27:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:27:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:27:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:27:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:27:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:27:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:27:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:27:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:27:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:27:11 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:27:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:27:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:27:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:27:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:27:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:27:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:27:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:27:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:27:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:27:11 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:27:11 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:27:11 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:27:11 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:27:11 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:27:11 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:27:11 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:27:11 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:27:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:27:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:27:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:27:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:27:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:27:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:27:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:27:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:27:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:27:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:27:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:27:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:27:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:41 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:27:41 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:27:41 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:27:41 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:27:41 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:27:41 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:27:41 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:27:41 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:27:41 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:27:41 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:27:41 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:27:41 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:27:41 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:27:41 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:27:41 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:27:41 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:27:41 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:27:41 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:27:41 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:27:41 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:27:41 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:27:41 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:27:41 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:27:41 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:27:41 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:27:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:27:41 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:27:41 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:27:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:27:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:27:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:27:41 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:27:41 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:27:41 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:27:41 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:27:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:41 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:27:41 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:27:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:27:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:47 IQ138000 wb-watchdog[6951]: [INFO] Interval #101 started. Waiting up to 60 seconds for error...
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7219] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7225] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7236] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7309] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7324] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7326] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7412] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7431] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7484] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7505] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7507] Config: added 'scan_ssid' value '1'
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7507] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7509] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.7509] Config: added 'psk' value '<hidden>'
Oct 11 03:27:50 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/75
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.8218] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:27:50 IQ138000 NetworkManager[404]: <info>  [1760153270.8221] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:27:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:27:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:27:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:27:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:27:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:27:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:27:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:27:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:27:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:27:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:28:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:28:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:28:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:28:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:28:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:28:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:28:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:28:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:28:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:28:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:28:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:28:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:28:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:28:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:28:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:28:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:28:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:28:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:28:11 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:28:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:28:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:28:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:28:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:28:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:28:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:28:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:28:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:28:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:28:11 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:28:11 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:28:11 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:28:11 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:28:11 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:28:11 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:28:11 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:28:11 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:28:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:15 IQ138000 NetworkManager[404]: <warn>  [1760153295.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:28:15 IQ138000 NetworkManager[404]: <info>  [1760153295.5313] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:28:15 IQ138000 NetworkManager[404]: <warn>  [1760153295.5376] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:28:15 IQ138000 NetworkManager[404]: <info>  [1760153295.5384] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:28:15 IQ138000 NetworkManager[404]: <info>  [1760153295.5385] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:28:15 IQ138000 NetworkManager[404]: <info>  [1760153295.5415] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:28:15 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/75
Oct 11 03:28:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:21 IQ138000 NetworkManager[404]: <info>  [1760153301.5948] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:28:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:28:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:28:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:28:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:28:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:28:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:28:41 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:28:41 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:28:41 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:28:41 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:28:41 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:28:41 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:28:41 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:28:41 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:28:41 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:28:41 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:28:41 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:28:41 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:28:41 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:28:41 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:28:41 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:28:41 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:28:41 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:28:41 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:28:41 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:28:41 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:28:41 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:28:41 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:28:41 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:28:41 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:28:41 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:28:41 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:28:41 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:28:41 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:28:41 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:28:41 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:28:41 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:28:41 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:28:41 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:28:41 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:28:41 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:28:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:28:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:28:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:28:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:28:47 IQ138000 wb-watchdog[7667]: [INFO] Interval #102 started. Waiting up to 60 seconds for error...
Oct 11 03:28:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:28:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:28:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:28:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 18 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:28:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:28:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:28:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:28:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:28:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:28:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:28:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:28:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:28:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:29:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:29:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:11 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:29:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:11 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:29:11 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:29:11 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:29:11 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:29:11 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:29:11 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:29:11 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:29:11 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:29:11 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:29:11 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:29:11 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:29:11 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:29:11 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:29:11 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:29:11 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:29:11 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:29:11 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:29:11 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:29:11 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:29:11 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:29:11 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:29:11 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:29:11 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:29:11 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:29:11 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:11 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:29:11 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:29:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:29:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:29:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:29:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:29:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:29:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:29:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:29:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:29:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:29:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:29:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:29:15 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:29:15 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:29:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9606] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9611] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9617] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9741] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9776] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9778] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:29:16 IQ138000 NetworkManager[404]: <info>  [1760153356.9966] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0019] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:29:17 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/76
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0049] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0053] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0054] Config: added 'scan_ssid' value '1'
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0055] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0056] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0057] Config: added 'psk' value '<hidden>'
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0728] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:29:17 IQ138000 NetworkManager[404]: <info>  [1760153357.0742] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:29:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:29:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:29:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:29:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:29:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:29:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:29:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:29:42 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:29:42 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:29:42 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:29:42 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:29:42 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:29:42 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:29:42 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:29:42 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:29:42 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:29:42 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:29:42 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:29:42 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:29:42 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:29:42 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:29:42 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:29:42 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:29:42 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:29:42 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:29:42 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:29:42 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:29:42 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:29:42 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:29:42 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:29:42 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:29:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:29:42 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:29:42 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:29:42 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:29:42 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:29:42 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:29:42 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:29:42 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:29:42 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:29:42 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:29:42 IQ138000 NetworkManager[404]: <warn>  [1760153382.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:29:42 IQ138000 NetworkManager[404]: <info>  [1760153382.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:29:42 IQ138000 NetworkManager[404]: <warn>  [1760153382.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:29:42 IQ138000 NetworkManager[404]: <info>  [1760153382.5350] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:29:42 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/76
Oct 11 03:29:42 IQ138000 NetworkManager[404]: <info>  [1760153382.5782] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:29:42 IQ138000 NetworkManager[404]: <info>  [1760153382.5784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:29:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:47 IQ138000 wb-watchdog[8283]: [INFO] Interval #103 started. Waiting up to 60 seconds for error...
Oct 11 03:29:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:48 IQ138000 NetworkManager[404]: <info>  [1760153388.7161] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:29:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:29:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:29:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:29:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:29:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:29:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:30:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:30:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:30:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8966 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:12 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:30:12 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:30:12 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:30:12 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:30:12 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:30:12 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:30:12 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:30:12 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:30:12 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:30:12 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:30:12 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:30:12 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:30:12 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:30:12 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:30:12 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:30:12 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:30:12 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:30:12 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:30:12 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:30:12 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:30:12 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:30:12 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:30:12 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:30:12 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:30:12 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:30:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:30:12 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:30:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:30:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:30:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:30:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:30:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:30:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:30:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:30:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:30:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L3, row count 7183, limit 7042
Oct 11 03:30:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:30:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:30:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:30:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:30:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:30:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:30:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:30:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:30:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:30:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:30:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:30:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:30:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:41 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:30:41 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:30:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:30:42 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:30:42 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:30:42 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:30:42 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:30:42 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:30:42 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:30:42 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:30:42 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:30:42 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:30:42 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:30:42 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:30:42 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:30:42 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:30:42 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:30:42 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:30:42 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:30:42 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:30:42 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:30:42 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:30:42 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:30:42 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:30:42 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:30:42 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:30:42 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:30:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:30:42 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:30:42 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:30:42 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:30:42 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:30:42 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:30:42 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:30:42 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:30:42 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:30:42 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:30:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.0819] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.0824] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.0830] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.0886] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.0905] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.0906] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1015] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1036] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1057] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1060] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1061] Config: added 'scan_ssid' value '1'
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1062] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1064] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1065] Config: added 'psk' value '<hidden>'
Oct 11 03:30:44 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/77
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1739] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:30:44 IQ138000 NetworkManager[404]: <info>  [1760153444.1742] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:30:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:44 IQ138000 npm[3714]: [2025-10-11 03:30:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"linkquality":47,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 03:30:44 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 03:30:44 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 03:30:44 IQ138000 wb-rules[6073]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 03:30:44 IQ138000 wb-rules[6073]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 03:30:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:30:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:47 IQ138000 wb-watchdog[8991]: [INFO] Interval #104 started. Waiting up to 60 seconds for error...
Oct 11 03:30:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:30:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:30:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:30:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:30:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:30:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:30:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:30:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:30:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:31:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:31:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:31:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:31:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:09 IQ138000 NetworkManager[404]: <warn>  [1760153469.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:31:09 IQ138000 NetworkManager[404]: <info>  [1760153469.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:31:09 IQ138000 NetworkManager[404]: <warn>  [1760153469.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:31:09 IQ138000 NetworkManager[404]: <info>  [1760153469.5352] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:31:09 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:31:09 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/77
Oct 11 03:31:09 IQ138000 NetworkManager[404]: <info>  [1760153469.5856] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:31:09 IQ138000 NetworkManager[404]: <info>  [1760153469.5868] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:31:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:31:10 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:31:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:12 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:31:12 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:31:12 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:31:12 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:31:12 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:31:12 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:31:12 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:31:12 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:31:12 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:31:12 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:31:12 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:31:12 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:31:12 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:31:12 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:31:12 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:31:12 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:31:12 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:31:12 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:31:12 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:31:12 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:31:12 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:31:12 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:31:12 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:31:12 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:31:12 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:31:12 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:31:12 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:31:12 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:31:12 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:31:12 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:31:12 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:31:12 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:31:12 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:31:12 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:31:12 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:31:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:15 IQ138000 NetworkManager[404]: <info>  [1760153475.8040] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:31:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:31:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:31:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:29 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:31:29 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:31:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:31:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L2, row count 7183, limit 7042
Oct 11 03:31:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:31:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:31:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:39 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:31:39 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:31:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:42 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:31:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:42 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:31:42 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:31:42 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:31:42 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:31:42 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:31:42 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:31:42 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:31:42 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:31:42 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:31:42 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:31:42 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:31:42 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:31:42 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:31:42 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:31:42 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:31:42 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:31:42 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:31:42 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:31:42 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:31:42 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:31:42 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:31:42 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:31:42 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:31:42 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:31:42 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:31:42 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:31:42 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:31:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:31:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:31:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:31:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:31:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:31:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:31:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:31:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:31:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:31:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:31:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:31:47 IQ138000 wb-watchdog[9605]: [INFO] Interval #105 started. Waiting up to 60 seconds for error...
Oct 11 03:31:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:31:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:31:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:31:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:31:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:31:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:31:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:32:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:32:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:32:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:32:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1264] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1294] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1309] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1439] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1466] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1471] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1571] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1595] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1612] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1616] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1617] Config: added 'scan_ssid' value '1'
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1618] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1620] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:32:11 IQ138000 NetworkManager[404]: <info>  [1760153531.1620] Config: added 'psk' value '<hidden>'
Oct 11 03:32:11 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/78
Oct 11 03:32:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:13 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:32:13 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:32:13 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:32:13 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:32:13 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:32:13 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:32:13 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:32:13 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:32:13 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:32:13 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:32:13 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:32:13 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:32:13 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:32:13 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:32:13 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:32:13 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:32:13 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:32:13 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:32:13 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:32:13 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:32:13 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:32:13 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:32:13 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:32:13 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:32:13 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:32:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:32:13 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:32:13 IQ138000 NetworkManager[404]: <info>  [1760153533.2373] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:32:13 IQ138000 NetworkManager[404]: <info>  [1760153533.2376] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:32:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:13 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:32:13 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:32:13 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:32:13 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:32:13 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:32:13 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:32:13 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:32:13 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:32:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:32:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:32:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:32:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:32:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:32:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:32:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:32:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:32:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:32:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:36 IQ138000 NetworkManager[404]: <warn>  [1760153556.5302] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:32:36 IQ138000 NetworkManager[404]: <info>  [1760153556.5304] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:32:36 IQ138000 NetworkManager[404]: <warn>  [1760153556.5334] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:32:36 IQ138000 NetworkManager[404]: <info>  [1760153556.5348] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:32:36 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/78
Oct 11 03:32:36 IQ138000 NetworkManager[404]: <info>  [1760153556.5690] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:32:36 IQ138000 NetworkManager[404]: <info>  [1760153556.5692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:32:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:42 IQ138000 NetworkManager[404]: <info>  [1760153562.9106] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:32:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:43 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:32:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:43 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:32:43 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:32:43 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:32:43 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:32:43 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:32:43 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:32:43 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:32:43 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:32:43 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:32:43 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:32:43 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:32:43 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:32:43 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:32:43 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:32:43 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:32:43 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:32:43 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:32:43 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:32:43 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:32:43 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:32:43 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:32:43 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:32:43 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:32:43 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:32:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:32:43 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:32:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:32:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:32:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:32:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:32:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:32:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:32:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:32:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:32:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:47 IQ138000 wb-watchdog[10298]: [INFO] Interval #106 started. Waiting up to 60 seconds for error...
Oct 11 03:32:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:47 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:32:47 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:32:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:32:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:32:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:32:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:32:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:32:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:32:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:32:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:33:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:33:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:33:13 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:33:13 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:33:13 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:33:13 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:33:13 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:33:13 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:33:13 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:33:13 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:33:13 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:33:13 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:33:13 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:33:13 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:33:13 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:33:13 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:33:13 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:33:13 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:33:13 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:33:13 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:33:13 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:33:13 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:33:13 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:33:13 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:33:13 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:33:13 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:33:13 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:33:13 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:33:13 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:33:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:33:13 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:33:13 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:33:13 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:33:13 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:33:13 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:33:13 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:33:13 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:33:13 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:33:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:33:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:33:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:33:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:33:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:33:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:33:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:33:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:33:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:33:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:35 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:33:35 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:33:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:33:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1480] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1485] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1493] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1591] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1616] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1617] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1706] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1731] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1760] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1763] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1764] Config: added 'scan_ssid' value '1'
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1765] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1766] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.1767] Config: added 'psk' value '<hidden>'
Oct 11 03:33:38 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/79
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.2528] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:33:38 IQ138000 NetworkManager[404]: <info>  [1760153618.2531] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:33:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:33:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:33:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:33:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:43 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:33:43 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:33:43 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:33:43 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:33:43 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:33:43 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:33:43 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:33:43 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:33:43 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:33:43 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:33:43 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:33:43 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:33:43 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:33:43 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:33:43 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:33:43 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:33:43 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:33:43 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:33:43 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:33:43 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:33:43 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:33:43 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:33:43 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:33:43 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:33:43 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:33:43 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:33:43 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:33:43 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:33:43 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:33:43 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:33:43 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:33:43 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:33:43 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:33:43 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:33:43 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:33:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:47 IQ138000 wb-watchdog[10919]: [INFO] Interval #107 started. Waiting up to 60 seconds for error...
Oct 11 03:33:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:33:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:33:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 03:33:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:33:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:33:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:33:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:33:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:34:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:34:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:34:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:34:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:34:03 IQ138000 NetworkManager[404]: <warn>  [1760153643.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:34:03 IQ138000 NetworkManager[404]: <info>  [1760153643.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:34:03 IQ138000 NetworkManager[404]: <warn>  [1760153643.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:34:03 IQ138000 NetworkManager[404]: <info>  [1760153643.5349] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:34:03 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/79
Oct 11 03:34:03 IQ138000 NetworkManager[404]: <info>  [1760153643.5782] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:34:03 IQ138000 NetworkManager[404]: <info>  [1760153643.5784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:34:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:34:09 IQ138000 NetworkManager[404]: <info>  [1760153649.8675] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:34:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:34:13 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:34:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:34:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:34:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:34:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:34:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:34:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:34:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:34:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:34:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:34:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:34:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:34:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:34:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:34:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:34:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:34:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:34:14 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:34:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:34:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:34:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:34:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:34:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:34:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:34:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:34:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:34:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:34:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:34:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:34:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:34:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:34:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:34:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:34:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:34:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:34:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:34:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:34:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:34:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:34:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:34:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:34:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:34 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:34:34 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:34:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:34:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:34:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:34:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:34:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:44 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:34:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:44 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:34:44 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:34:44 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:34:44 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:34:44 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:34:44 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:34:44 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:34:44 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:34:44 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:34:44 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:34:44 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:34:44 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:34:44 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:34:44 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:34:44 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:34:44 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:34:44 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:34:44 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:34:44 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:34:44 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:34:44 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:34:44 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:34:44 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:34:44 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:34:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:34:44 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:34:44 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:34:44 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:34:44 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:34:44 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:34:44 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:34:44 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:34:44 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:34:44 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:34:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:34:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:34:47 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:34:47 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:34:47 IQ138000 wb-watchdog[11628]: [INFO] Interval #108 started. Waiting up to 60 seconds for error...
Oct 11 03:34:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:34:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:34:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:34:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:34:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:34:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:34:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:35:01 IQ138000 CRON[11813]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:35:01 IQ138000 CRON[11817]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 03:35:01 IQ138000 CRON[11813]: pam_unix(cron:session): session closed for user root
Oct 11 03:35:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:35:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1458] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1463] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1468] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1525] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1543] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1545] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1625] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1651] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1671] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1674] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1675] Config: added 'scan_ssid' value '1'
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1676] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1678] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.1679] Config: added 'psk' value '<hidden>'
Oct 11 03:35:05 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/80
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.2340] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:35:05 IQ138000 NetworkManager[404]: <info>  [1760153705.2345] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:35:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:35:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:35:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:35:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:35:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:35:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:35:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:35:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:35:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:35:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:35:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:35:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:35:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:35:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:35:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:35:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:35:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:35:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:35:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:35:14 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:35:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:35:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:35:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:35:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:35:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:35:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:35:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:35:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:35:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:35:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:35:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:35:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:35:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:35:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:35:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:35:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:35:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:35:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:35:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:35:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:35:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:35:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:35:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:35:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:35:30 IQ138000 NetworkManager[404]: <warn>  [1760153730.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:35:30 IQ138000 NetworkManager[404]: <info>  [1760153730.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:35:30 IQ138000 NetworkManager[404]: <warn>  [1760153730.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:35:30 IQ138000 NetworkManager[404]: <info>  [1760153730.5349] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:35:30 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/80
Oct 11 03:35:30 IQ138000 NetworkManager[404]: <info>  [1760153730.5786] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:35:30 IQ138000 NetworkManager[404]: <info>  [1760153730.5788] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:35:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:36 IQ138000 NetworkManager[404]: <info>  [1760153736.9132] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:35:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:35:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:35:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:35:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:35:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:35:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:35:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:35:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:35:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:44 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:35:44 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:35:44 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:35:44 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:35:44 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:35:44 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:35:44 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:35:44 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:35:44 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:35:44 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:35:44 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:35:44 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:35:44 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:35:44 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:35:44 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:35:44 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:35:44 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:35:44 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:35:44 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:35:44 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:35:44 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:35:44 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:35:44 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:35:44 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:35:44 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:35:44 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:35:44 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:35:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:35:44 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:35:44 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:35:44 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:35:44 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:35:44 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:35:44 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:35:44 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:35:44 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:35:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:47 IQ138000 wb-watchdog[12236]: [INFO] Interval #109 started. Waiting up to 60 seconds for error...
Oct 11 03:35:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:35:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:35:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:35:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:35:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:35:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:35:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:35:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:35:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:36:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:36:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:36:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:12 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:36:12 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:36:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:36:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:36:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:36:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:36:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:36:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:36:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:36:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:36:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:36:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:36:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:36:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:36:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:36:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:36:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:36:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:36:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:36:14 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:36:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:36:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:36:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:36:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:36:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:36:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:36:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:36:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:36:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:36:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:36:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:36:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:36:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:36:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:36:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:36:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:36:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:36:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:36:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:36:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:36:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:36:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:36:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:36:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:31 IQ138000 NetworkManager[404]: <info>  [1760153791.9839] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:36:31 IQ138000 NetworkManager[404]: <info>  [1760153791.9844] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:36:31 IQ138000 NetworkManager[404]: <info>  [1760153791.9854] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:36:31 IQ138000 NetworkManager[404]: <info>  [1760153791.9904] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:36:31 IQ138000 NetworkManager[404]: <info>  [1760153791.9927] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:36:31 IQ138000 NetworkManager[404]: <info>  [1760153791.9929] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0028] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0049] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0065] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0069] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0070] Config: added 'scan_ssid' value '1'
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0071] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0072] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0073] Config: added 'psk' value '<hidden>'
Oct 11 03:36:32 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/81
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0858] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:36:32 IQ138000 NetworkManager[404]: <info>  [1760153792.0861] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:36:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:36:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:36:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:36:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:36:44 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:36:45 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:36:45 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:36:45 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:36:45 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:36:45 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:36:45 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:36:45 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:36:45 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:36:45 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:36:45 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:36:45 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:36:45 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:36:45 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:36:45 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:36:45 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:36:45 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:36:45 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:36:45 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:36:45 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:36:45 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:36:45 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:36:45 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:36:45 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:36:45 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:36:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:36:45 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:36:45 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:36:45 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:36:45 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:36:45 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:36:45 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:36:45 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:36:45 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:36:45 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:36:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:47 IQ138000 wb-watchdog[12952]: [INFO] Interval #110 started. Waiting up to 60 seconds for error...
Oct 11 03:36:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:36:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:36:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:36:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:36:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:36:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:36:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:36:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:36:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:36:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:57 IQ138000 NetworkManager[404]: <warn>  [1760153817.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:36:57 IQ138000 NetworkManager[404]: <info>  [1760153817.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:36:57 IQ138000 NetworkManager[404]: <warn>  [1760153817.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:36:57 IQ138000 NetworkManager[404]: <info>  [1760153817.5354] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:36:57 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:36:57 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/81
Oct 11 03:36:57 IQ138000 NetworkManager[404]: <info>  [1760153817.5814] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:36:57 IQ138000 NetworkManager[404]: <info>  [1760153817.5816] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:36:58 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:36:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:36:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:36:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:03 IQ138000 NetworkManager[404]: <info>  [1760153823.7107] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:37:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:37:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:37:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:37:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:37:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:37:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:37:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:37:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:15 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:37:15 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:37:15 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:37:15 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:37:15 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:37:15 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:37:15 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:37:15 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:37:15 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:37:15 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:37:15 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:37:15 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:37:15 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:37:15 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:37:15 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:37:15 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:37:15 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:37:15 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:37:15 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:37:15 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:37:15 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:37:15 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:37:15 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:37:15 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:37:15 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:37:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:37:15 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:15 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:37:15 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:37:15 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:37:15 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:37:15 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:37:15 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:37:15 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:37:15 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:37:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:37:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:37:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:37:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:37:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:37:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:37:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:37:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:37:28 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:37:28 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:37:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:37:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:37:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:37:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:37:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:37:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:37:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:37:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:37:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:37:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:45 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:37:45 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:37:45 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:37:45 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:37:45 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:37:45 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:37:45 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:37:45 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:37:45 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:37:45 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:37:45 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:37:45 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:37:45 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:37:45 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:37:45 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:37:45 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:37:45 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:37:45 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:37:45 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:37:45 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:37:45 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:37:45 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:37:45 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:37:45 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:37:45 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:37:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:37:45 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:37:45 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:37:45 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:37:45 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:37:45 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:37:45 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:37:45 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:37:45 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:37:45 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:37:47 IQ138000 wb-watchdog[13554]: [INFO] Interval #111 started. Waiting up to 60 seconds for error...
Oct 11 03:37:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:37:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 03:37:52 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 03:37:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:37:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:37:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:37:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:37:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:37:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9472] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9477] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9483] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9541] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9572] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9573] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9687] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9709] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9726] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9729] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9730] Config: added 'scan_ssid' value '1'
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9731] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9732] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:37:58 IQ138000 NetworkManager[404]: <info>  [1760153878.9733] Config: added 'psk' value '<hidden>'
Oct 11 03:37:59 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/82
Oct 11 03:37:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:37:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:37:59 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:37:59 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:38:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:01 IQ138000 CRON[13753]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:38:01 IQ138000 CRON[13757]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 03:38:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:02 IQ138000 NetworkManager[404]: <info>  [1760153882.0669] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:38:02 IQ138000 NetworkManager[404]: <info>  [1760153882.0671] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 sSMTP[13768]: Unable to locate mail
Oct 11 03:38:02 IQ138000 sSMTP[13768]: Cannot open mail:25
Oct 11 03:38:02 IQ138000 cron[13768]: sendmail: Cannot open mail:25
Oct 11 03:38:02 IQ138000 CRON[13753]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 03:38:02 IQ138000 CRON[13753]: pam_unix(cron:session): session closed for user root
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:38:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:38:15 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:38:15 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:38:15 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:38:15 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:38:15 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:38:15 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:38:15 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:38:15 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:38:15 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:38:15 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:38:15 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:38:15 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:38:15 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:38:15 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:38:15 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:38:15 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:38:15 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:38:15 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:38:15 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:38:15 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:38:15 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:38:15 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:38:15 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:38:15 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:38:15 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:15 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:38:15 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:38:15 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:38:15 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:38:15 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:38:15 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:38:15 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:38:15 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:38:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L3, row count 7183, limit 7042
Oct 11 03:38:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L1, row count 7183, limit 7042
Oct 11 03:38:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L2, row count 7183, limit 7042
Oct 11 03:38:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:38:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:38:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:38:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:38:24 IQ138000 NetworkManager[404]: <warn>  [1760153904.5305] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:38:24 IQ138000 NetworkManager[404]: <info>  [1760153904.5307] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:38:24 IQ138000 NetworkManager[404]: <warn>  [1760153904.5367] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:38:24 IQ138000 NetworkManager[404]: <info>  [1760153904.5383] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:38:24 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/82
Oct 11 03:38:24 IQ138000 NetworkManager[404]: <info>  [1760153904.5762] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:38:24 IQ138000 NetworkManager[404]: <info>  [1760153904.5764] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:38:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:38:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:38:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:38:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:38:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:38:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:30 IQ138000 NetworkManager[404]: <info>  [1760153910.7305] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:38:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:38:32 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:38:32 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:38:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:45 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:38:45 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:38:45 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:38:45 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:38:45 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:38:45 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:38:45 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:38:45 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:38:45 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:38:45 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:38:45 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:38:45 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:38:45 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:38:45 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:38:45 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:38:45 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:38:45 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:38:45 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:38:45 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:38:45 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:38:45 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:38:45 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:38:45 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:38:45 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:38:45 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:38:45 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:38:45 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:38:45 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:38:45 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:38:45 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:38:45 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:38:45 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:38:45 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:38:45 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:38:45 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:38:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:47 IQ138000 wb-watchdog[14283]: [INFO] Interval #112 started. Waiting up to 60 seconds for error...
Oct 11 03:38:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:38:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:38:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:38:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:38:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:38:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:38:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:39:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:39:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:39:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:39:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:39:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:39:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:39:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:39:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:39:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:39:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:39:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:15 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:39:16 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:39:16 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:39:16 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:39:16 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:39:16 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:39:16 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:39:16 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:39:16 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:39:16 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:39:16 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:39:16 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:39:16 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:39:16 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:39:16 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:39:16 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:39:16 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:39:16 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:39:16 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:39:16 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:39:16 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:39:16 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:39:16 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:39:16 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:39:16 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:39:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:39:16 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:39:16 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:39:16 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:39:16 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:39:16 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:39:16 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:39:16 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:39:16 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:39:16 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:39:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:39:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8588] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8613] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8645] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8744] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8764] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8766] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8884] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8948] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8969] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8972] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8974] Config: added 'scan_ssid' value '1'
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8974] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:39:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8976] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.8976] Config: added 'psk' value '<hidden>'
Oct 11 03:39:25 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/83
Oct 11 03:39:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.9862] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:39:25 IQ138000 NetworkManager[404]: <info>  [1760153965.9864] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:39:32 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:39:32 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:39:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:39:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:46 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:39:46 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:39:46 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:39:46 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:39:46 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:39:46 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:39:46 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:39:46 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:39:46 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:39:46 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:39:46 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:39:46 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:39:46 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:39:46 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:39:46 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:39:46 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:39:46 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:39:46 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:39:46 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:39:46 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:39:46 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:39:46 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:39:46 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:39:46 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:39:46 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:39:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:39:46 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:39:46 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:39:46 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:39:46 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:39:46 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:39:46 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:39:46 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:39:46 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:39:46 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:39:47 IQ138000 wb-watchdog[14892]: [INFO] Interval #113 started. Waiting up to 60 seconds for error...
Oct 11 03:39:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:39:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:39:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 NetworkManager[404]: <warn>  [1760153991.5303] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:39:51 IQ138000 NetworkManager[404]: <info>  [1760153991.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:39:51 IQ138000 NetworkManager[404]: <warn>  [1760153991.5335] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:39:51 IQ138000 NetworkManager[404]: <info>  [1760153991.5350] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:39:51 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:39:51 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/83
Oct 11 03:39:51 IQ138000 NetworkManager[404]: <info>  [1760153991.5742] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:39:51 IQ138000 NetworkManager[404]: <info>  [1760153991.5743] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:39:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:39:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:39:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:39:57 IQ138000 NetworkManager[404]: <info>  [1760153997.6734] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:39:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:39:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:40:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:40:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:40:16 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:40:16 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:40:16 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:40:16 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:40:16 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:40:16 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:40:16 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:40:16 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:40:16 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:40:16 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:40:16 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:40:16 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:40:16 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:40:16 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:40:16 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:40:16 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:40:16 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:40:16 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:40:16 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:40:16 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:40:16 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:40:16 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:40:16 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:40:16 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:40:16 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:40:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:40:16 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:40:16 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:40:16 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:40:16 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:40:16 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:40:16 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:40:16 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:40:16 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:40:16 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:40:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:40:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:40:20 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:40:20 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:40:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:40:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:40:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:40:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:40:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:40:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:40:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:40:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:40:40 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:40:40 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:40:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:46 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:40:46 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:40:46 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:40:46 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:40:46 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:40:46 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:40:46 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:40:46 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:40:46 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:40:46 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:40:46 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:40:46 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:40:46 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:40:46 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:40:46 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:40:46 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:40:46 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:40:46 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:40:46 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:40:46 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:40:46 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:40:46 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:40:46 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:40:46 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:40:46 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:40:46 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:40:46 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:40:46 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:40:46 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:40:46 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:40:46 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:40:46 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:40:46 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:40:46 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:40:46 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:47 IQ138000 wb-watchdog[15588]: [INFO] Interval #114 started. Waiting up to 60 seconds for error...
Oct 11 03:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:40:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 03:40:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:40:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8563] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8568] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8573] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8736] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8759] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8761] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8883] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8910] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8934] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8938] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8939] Config: added 'scan_ssid' value '1'
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8941] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8942] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:40:52 IQ138000 NetworkManager[404]: <info>  [1760154052.8943] Config: added 'psk' value '<hidden>'
Oct 11 03:40:52 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/84
Oct 11 03:40:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:40:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:40:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:40:55 IQ138000 NetworkManager[404]: <info>  [1760154055.9806] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:40:55 IQ138000 NetworkManager[404]: <info>  [1760154055.9808] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:40:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:40:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:40:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:41:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:41:01 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:41:01 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:41:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:16 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:41:16 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:41:16 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:41:16 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:41:16 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:41:16 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:41:16 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:41:16 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:41:16 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:41:16 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:41:16 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:41:16 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:41:16 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:41:16 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:41:16 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:41:16 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:41:16 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:41:16 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:41:16 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:41:16 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:41:16 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:41:16 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:41:16 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:41:16 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:41:16 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:41:16 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:16 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:41:16 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:41:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:41:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:41:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:41:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:41:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:41:17 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:41:17 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:41:17 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:41:17 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:41:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:18 IQ138000 NetworkManager[404]: <warn>  [1760154078.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:41:18 IQ138000 NetworkManager[404]: <info>  [1760154078.5313] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:41:18 IQ138000 NetworkManager[404]: <warn>  [1760154078.5344] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:41:18 IQ138000 NetworkManager[404]: <info>  [1760154078.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:41:18 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/84
Oct 11 03:41:18 IQ138000 NetworkManager[404]: <info>  [1760154078.5844] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:41:18 IQ138000 NetworkManager[404]: <info>  [1760154078.5846] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:41:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:24 IQ138000 NetworkManager[404]: <info>  [1760154084.6633] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:41:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:41:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:41:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:41:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:41:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:41:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:41:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:41:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:41:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:41:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:41:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:41:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:47 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:41:47 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:41:47 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:41:47 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:41:47 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:41:47 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:41:47 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:41:47 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:41:47 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:41:47 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:41:47 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:41:47 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:41:47 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:41:47 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:41:47 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:41:47 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:41:47 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:41:47 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:41:47 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:41:47 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:41:47 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:41:47 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:41:47 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:41:47 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:41:47 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:41:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:41:47 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:47 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:41:47 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:41:47 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:41:47 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:41:47 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:41:47 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:41:47 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:41:47 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:41:47 IQ138000 wb-watchdog[16204]: [INFO] Interval #115 started. Waiting up to 60 seconds for error...
Oct 11 03:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:41:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:41:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:41:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:41:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:41:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:41:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:41:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:42:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:42:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:42:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L2, row count 7183, limit 7042
Oct 11 03:42:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:42:17 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:42:17 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:42:17 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:42:17 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:42:17 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:42:17 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:42:17 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:42:17 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:42:17 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:42:17 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:42:17 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:42:17 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:42:17 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:42:17 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:42:17 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:42:17 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:42:17 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:42:17 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:42:17 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:42:17 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:42:17 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:42:17 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:42:17 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:42:17 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:42:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:42:17 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:42:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:42:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:42:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:42:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:42:17 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:42:17 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:42:17 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:42:17 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:42:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7635] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7643] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7650] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7716] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7747] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7749] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7831] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7848] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7886] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7892] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7893] Config: added 'scan_ssid' value '1'
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7894] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7895] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.7896] Config: added 'psk' value '<hidden>'
Oct 11 03:42:19 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/85
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.8686] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:42:19 IQ138000 NetworkManager[404]: <info>  [1760154139.8689] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:42:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:42:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:24 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:42:24 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:42:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:42:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:42:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:42:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:42:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:45 IQ138000 NetworkManager[404]: <warn>  [1760154165.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:42:45 IQ138000 NetworkManager[404]: <info>  [1760154165.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:42:45 IQ138000 NetworkManager[404]: <warn>  [1760154165.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:42:45 IQ138000 NetworkManager[404]: <info>  [1760154165.5404] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:42:45 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:42:45 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/85
Oct 11 03:42:45 IQ138000 NetworkManager[404]: <info>  [1760154165.5842] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:42:45 IQ138000 NetworkManager[404]: <info>  [1760154165.5843] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:42:46 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:42:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:42:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:42:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:47 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:42:47 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:42:47 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:42:47 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:42:47 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:42:47 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:42:47 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:42:47 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:42:47 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:42:47 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:42:47 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:42:47 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:42:47 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:42:47 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:42:47 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:42:47 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:42:47 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:42:47 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:42:47 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:42:47 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:42:47 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:42:47 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:42:47 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:42:47 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:42:47 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:42:47 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:42:47 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:42:47 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:42:47 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:42:47 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:42:47 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:42:47 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:42:47 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:42:47 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:42:47 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:42:47 IQ138000 wb-watchdog[16912]: [INFO] Interval #116 started. Waiting up to 60 seconds for error...
Oct 11 03:42:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 NetworkManager[404]: <info>  [1760154171.5722] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:42:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:42:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:42:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:42:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:42:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:42:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:42:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:42:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:42:59 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:42:59 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:43:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12808 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:17 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:43:17 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:43:17 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:43:17 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:43:17 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:43:17 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:43:17 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:43:17 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:43:17 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:43:17 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:43:17 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:43:17 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:43:17 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:43:17 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:43:17 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:43:17 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:43:17 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:43:17 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:43:17 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:43:17 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:43:17 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:43:17 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:43:17 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:43:17 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:43:17 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:43:17 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:43:17 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:43:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:17 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:43:17 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:43:17 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:43:17 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:43:17 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:43:17 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:43:17 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:43:17 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:43:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:43:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:43:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:43:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8616] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8622] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8630] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8713] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8737] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8739] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8933] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8956] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8976] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8979] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8980] Config: added 'scan_ssid' value '1'
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8981] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8983] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:43:46 IQ138000 NetworkManager[404]: <info>  [1760154226.8983] Config: added 'psk' value '<hidden>'
Oct 11 03:43:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:46 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/86
Oct 11 03:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:47 IQ138000 wb-watchdog[17519]: [INFO] Interval #117 started. Waiting up to 60 seconds for error...
Oct 11 03:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:47 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:43:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:43:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:43:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:43:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:43:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:43:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:43:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:43:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:43:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:43:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:43:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:43:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:43:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:43:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:43:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:43:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:43:48 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:43:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:43:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:43:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:43:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:43:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:43:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:43:48 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:43:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:43:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:43:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:43:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:43:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:43:48 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:43:48 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:43:48 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:43:48 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:50 IQ138000 NetworkManager[404]: <info>  [1760154230.9889] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:43:50 IQ138000 NetworkManager[404]: <info>  [1760154230.9892] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:43:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:43:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:43:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:43:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:43:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:43:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:43:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:43:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:44:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:44:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:44:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:44:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:44:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:12 IQ138000 NetworkManager[404]: <warn>  [1760154252.5304] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:44:12 IQ138000 NetworkManager[404]: <info>  [1760154252.5306] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:44:12 IQ138000 NetworkManager[404]: <warn>  [1760154252.5338] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:44:12 IQ138000 NetworkManager[404]: <info>  [1760154252.5356] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:44:12 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/86
Oct 11 03:44:12 IQ138000 NetworkManager[404]: <info>  [1760154252.5778] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:44:12 IQ138000 NetworkManager[404]: <info>  [1760154252.5780] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:44:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:44:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L2, row count 7183, limit 7042
Oct 11 03:44:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:44:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:44:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:44:18 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:44:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:18 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:44:18 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:44:18 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:44:18 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:44:18 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:44:18 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:44:18 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:44:18 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:44:18 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:44:18 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:44:18 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:44:18 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:44:18 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:44:18 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:44:18 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:44:18 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:44:18 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:44:18 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:44:18 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:44:18 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:44:18 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:44:18 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:44:18 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:44:18 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:44:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:44:18 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:44:18 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:44:18 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:44:18 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:44:18 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:44:18 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:44:18 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:44:18 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:44:18 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:44:18 IQ138000 NetworkManager[404]: <info>  [1760154258.6428] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:44:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:44:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:44:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:44:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:44:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:44:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:44:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:44:44 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:44:44 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:44:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:44:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 8443 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:44:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:47 IQ138000 wb-watchdog[18225]: [INFO] Interval #118 started. Waiting up to 60 seconds for error...
Oct 11 03:44:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:44:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:44:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:44:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:44:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:44:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:44:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:44:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:44:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:44:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:44:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:44:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:44:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:44:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:44:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:44:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:44:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:44:48 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:44:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:44:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:44:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:44:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:44:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:44:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:44:48 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:44:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:44:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:44:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:44:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:44:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:44:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:44:48 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:44:48 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:44:48 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:44:48 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:44:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:44:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:44:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:44:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:01 IQ138000 CRON[18422]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:45:01 IQ138000 CRON[18426]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 03:45:01 IQ138000 CRON[18422]: pam_unix(cron:session): session closed for user root
Oct 11 03:45:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:45:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:45:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:45:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:45:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:45:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:45:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:45:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:45:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9312] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9317] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9331] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9411] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9428] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9431] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9519] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9541] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9558] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9562] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9563] Config: added 'scan_ssid' value '1'
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9564] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9565] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:45:13 IQ138000 NetworkManager[404]: <info>  [1760154313.9566] Config: added 'psk' value '<hidden>'
Oct 11 03:45:13 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/87
Oct 11 03:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:14 IQ138000 NetworkManager[404]: <info>  [1760154314.0276] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:45:14 IQ138000 NetworkManager[404]: <info>  [1760154314.0279] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:45:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:45:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:45:18 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:45:18 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:45:18 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:45:18 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:45:18 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:45:18 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:45:18 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:45:18 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:45:18 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:45:18 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:45:18 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:45:18 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:45:18 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:45:18 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:45:18 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:45:18 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:45:18 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:45:18 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:45:18 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:45:18 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:45:18 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:45:18 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:45:18 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:45:18 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:45:18 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:45:18 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:45:18 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:45:18 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:45:18 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:45:18 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:45:18 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:45:18 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:45:18 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:45:18 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:45:18 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:45:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:45:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:45:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:45:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:45:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:45:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:45:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:45:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:45:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:45:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:45:39 IQ138000 NetworkManager[404]: <warn>  [1760154339.5313] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:45:39 IQ138000 NetworkManager[404]: <info>  [1760154339.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:45:39 IQ138000 NetworkManager[404]: <warn>  [1760154339.5355] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:45:39 IQ138000 NetworkManager[404]: <info>  [1760154339.5372] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:45:39 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/87
Oct 11 03:45:39 IQ138000 NetworkManager[404]: <info>  [1760154339.5852] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:45:39 IQ138000 NetworkManager[404]: <info>  [1760154339.5853] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:45:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:45 IQ138000 NetworkManager[404]: <info>  [1760154345.6568] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:45:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:47 IQ138000 wb-watchdog[18836]: [INFO] Interval #119 started. Waiting up to 60 seconds for error...
Oct 11 03:45:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:48 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:45:48 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:45:48 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:45:48 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:45:48 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:45:48 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:45:48 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:45:48 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:45:48 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:45:48 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:45:48 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:45:48 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:45:48 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:45:48 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:45:48 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:45:48 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:45:48 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:45:48 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:45:48 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:45:48 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:45:48 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:45:48 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:45:48 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:45:48 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:45:48 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:45:48 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:45:48 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:45:48 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:45:48 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:45:48 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:45:48 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:45:48 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:45:48 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:45:48 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:45:48 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:45:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:45:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:45:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:45:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:45:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:45:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:54 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:45:54 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:45:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:45:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:45:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:45:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:45:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:46:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:46:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:46:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:46:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:46:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:18 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:46:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:46:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:46:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:46:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:46:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:46:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:46:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:46:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:46:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:46:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:46:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:46:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:46:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:46:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:46:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:46:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:46:19 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:46:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:46:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:46:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:46:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:46:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:46:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:46:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:46:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:46:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:46:19 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:46:19 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:46:19 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:46:19 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:46:19 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:46:19 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:46:19 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:46:19 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:46:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:46:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:46:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:46:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:46:32 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:46:32 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:46:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:40 IQ138000 NetworkManager[404]: <info>  [1760154400.9929] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:46:40 IQ138000 NetworkManager[404]: <info>  [1760154400.9940] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:46:40 IQ138000 NetworkManager[404]: <info>  [1760154400.9946] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0009] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0044] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0056] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0176] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0201] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0228] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0232] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0233] Config: added 'scan_ssid' value '1'
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0234] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0237] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0238] Config: added 'psk' value '<hidden>'
Oct 11 03:46:41 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/88
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0931] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:46:41 IQ138000 NetworkManager[404]: <info>  [1760154401.0935] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:46:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:47 IQ138000 wb-watchdog[19542]: [INFO] Interval #120 started. Waiting up to 60 seconds for error...
Oct 11 03:46:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:49 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:46:49 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:46:49 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:46:49 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:46:49 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:46:49 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:46:49 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:46:49 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:46:49 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:46:49 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:46:49 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:46:49 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:46:49 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:46:49 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:46:49 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:46:49 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:46:49 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:46:49 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:46:49 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:46:49 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:46:49 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:46:49 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:46:49 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:46:49 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:46:49 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:46:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:46:49 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:46:49 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:46:49 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:46:49 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:46:49 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:46:49 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:46:49 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:46:49 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:46:49 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:46:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 03:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:46:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:46:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:46:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:46:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:46:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:46:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:06 IQ138000 NetworkManager[404]: <warn>  [1760154426.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:47:06 IQ138000 NetworkManager[404]: <info>  [1760154426.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:47:06 IQ138000 NetworkManager[404]: <warn>  [1760154426.5342] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:47:06 IQ138000 NetworkManager[404]: <info>  [1760154426.5357] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:47:06 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:47:06 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/88
Oct 11 03:47:06 IQ138000 NetworkManager[404]: <info>  [1760154426.5794] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:47:06 IQ138000 NetworkManager[404]: <info>  [1760154426.5796] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:47:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:07 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:47:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:47:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:47:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:47:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:47:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:47:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:12 IQ138000 NetworkManager[404]: <info>  [1760154432.7252] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:47:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:47:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:47:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:47:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:47:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:47:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:47:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:47:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:47:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:47:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:47:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:47:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:47:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:47:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:47:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:47:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:47:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:47:19 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:47:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:47:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:47:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:47:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:47:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:47:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:47:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:47:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:47:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:47:19 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:47:19 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:47:19 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:47:19 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:47:19 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:47:19 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:47:19 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:47:19 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:47:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:47:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:47:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:47:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:47:31 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:47:31 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:47:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:47:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L2, row count 7183, limit 7042
Oct 11 03:47:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:47:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:47:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-watchdog[20145]: [INFO] Interval #121 started. Waiting up to 60 seconds for error...
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:47:49 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:47:49 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:47:49 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:47:49 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:47:49 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:47:49 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:47:49 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:47:49 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:47:49 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:47:49 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:47:49 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:47:49 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:47:49 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:47:49 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:47:49 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:47:49 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:47:49 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:47:49 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:47:49 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:47:49 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:47:49 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:47:49 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:47:49 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:47:49 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:47:49 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:47:49 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:47:49 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:47:49 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:47:49 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:47:49 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:47:49 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:47:49 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:47:49 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:47:49 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:47:49 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:47:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:47:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:47:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:47:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:48:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:48:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0187] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0192] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0198] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0254] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0270] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0271] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0366] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0440] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0499] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0504] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0505] Config: added 'scan_ssid' value '1'
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0506] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0508] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:48:08 IQ138000 NetworkManager[404]: <info>  [1760154488.0509] Config: added 'psk' value '<hidden>'
Oct 11 03:48:08 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/89
Oct 11 03:48:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:48:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:48:10 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:48:10 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:48:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:11 IQ138000 NetworkManager[404]: <info>  [1760154491.1285] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:48:11 IQ138000 NetworkManager[404]: <info>  [1760154491.1313] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:48:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L3, row count 7183, limit 7042
Oct 11 03:48:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:48:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:48:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:48:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:48:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:48:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:48:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:48:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:48:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:48:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:48:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:48:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:48:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:48:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:48:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:48:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:48:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:48:19 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:48:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:48:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:48:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:48:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:48:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:48:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:48:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:48:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:48:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:48:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:20 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:48:20 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:48:20 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:48:20 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:48:20 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:48:20 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:48:20 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:48:20 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:48:20 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:48:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:33 IQ138000 NetworkManager[404]: <warn>  [1760154513.5311] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:48:33 IQ138000 NetworkManager[404]: <info>  [1760154513.5313] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:48:33 IQ138000 NetworkManager[404]: <warn>  [1760154513.5344] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:48:33 IQ138000 NetworkManager[404]: <info>  [1760154513.5359] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:48:33 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/89
Oct 11 03:48:33 IQ138000 NetworkManager[404]: <info>  [1760154513.5909] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:48:33 IQ138000 NetworkManager[404]: <info>  [1760154513.5911] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:48:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:48:39 IQ138000 NetworkManager[404]: <info>  [1760154519.8081] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:48:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:48:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:48:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:48:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:47 IQ138000 wb-watchdog[20865]: [INFO] Interval #122 started. Waiting up to 60 seconds for error...
Oct 11 03:48:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:50 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:48:50 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:48:50 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:48:50 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:48:50 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:48:50 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:48:50 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:48:50 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:48:50 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:48:50 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:48:50 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:48:50 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:48:50 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:48:50 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:48:50 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:48:50 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:48:50 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:48:50 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:48:50 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:48:50 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:48:50 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:48:50 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:48:50 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:48:50 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:48:50 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:48:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:48:50 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:48:50 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:48:50 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:48:50 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:48:50 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:48:50 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:48:50 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:48:50 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:48:50 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:48:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:48:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:48:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:48:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:48:59 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:48:59 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:48:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:49:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:49:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:20 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:49:20 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:49:20 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:49:20 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:49:20 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:49:20 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:49:20 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:49:20 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:49:20 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:49:20 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:49:20 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:49:20 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:49:20 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:49:20 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:49:20 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:49:20 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:49:20 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:49:20 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:49:20 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:49:20 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:49:20 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:49:20 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:49:20 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:49:20 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:49:20 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:49:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:49:20 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:49:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:20 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:49:20 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:49:20 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:49:20 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:49:20 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:49:20 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:49:20 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:49:20 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:49:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:49:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:49:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:49:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1496] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1509] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1516] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1619] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1644] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1649] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1742] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1766] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1786] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1793] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1794] Config: added 'scan_ssid' value '1'
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1795] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1797] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.1798] Config: added 'psk' value '<hidden>'
Oct 11 03:49:35 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/90
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.2536] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:49:35 IQ138000 NetworkManager[404]: <info>  [1760154575.2539] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:49:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L2, row count 7183, limit 7042
Oct 11 03:49:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L2, row count 7183, limit 7042
Oct 11 03:49:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L1, row count 7183, limit 7042
Oct 11 03:49:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:49:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:49:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:49:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:49:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:49:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:49:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:49:47 IQ138000 wb-watchdog[21463]: [INFO] Interval #123 started. Waiting up to 60 seconds for error...
Oct 11 03:49:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:47 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:49:47 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:49:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:49:50 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:49:50 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:49:50 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:49:50 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:49:50 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:49:50 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:49:50 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:49:50 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:49:50 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:49:50 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:49:50 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:49:50 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:49:50 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:49:50 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:49:50 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:49:50 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:49:50 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:49:50 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:49:50 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:49:50 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:49:50 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:49:50 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:49:50 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:49:50 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:49:50 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:49:50 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:49:50 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:49:50 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:49:50 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:49:50 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:49:50 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:49:50 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:49:50 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:49:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:49:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:49:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:49:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:49:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:49:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:49:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:50:00 IQ138000 NetworkManager[404]: <warn>  [1760154600.5307] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:50:00 IQ138000 NetworkManager[404]: <info>  [1760154600.5309] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:50:00 IQ138000 NetworkManager[404]: <warn>  [1760154600.5337] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:50:00 IQ138000 NetworkManager[404]: <info>  [1760154600.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:50:00 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/90
Oct 11 03:50:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:00 IQ138000 NetworkManager[404]: <info>  [1760154600.5823] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:50:00 IQ138000 NetworkManager[404]: <info>  [1760154600.5825] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:06 IQ138000 NetworkManager[404]: <info>  [1760154606.9589] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 discrete(s) @ 7 of device </dev/ttyRS485-1 9600 8 N 2> modbus:108: Serial protocol error: request timed out
Oct 11 03:50:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:50:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:50:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:50:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:50:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 5, row count 7183, limit 7042
Oct 11 03:50:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 2, row count 7183, limit 7042
Oct 11 03:50:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 6, row count 7183, limit 7042
Oct 11 03:50:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:50:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:50:20 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:50:20 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:50:20 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:50:20 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:50:20 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:50:20 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:50:20 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:50:20 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:50:20 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:50:20 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:50:20 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:50:20 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:50:20 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:50:20 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:50:20 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:50:20 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:50:20 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:50:20 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:50:20 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:50:20 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:50:20 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:50:20 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:50:20 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:50:20 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:50:20 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:50:20 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:50:20 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:50:20 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:50:20 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:50:20 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:50:20 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:50:20 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:50:20 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:50:20 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:50:20 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:50:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:50:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:50:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:50:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:50:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:50:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:50:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:50:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:50:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:50:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:50:47 IQ138000 wb-watchdog[22172]: [INFO] Interval #124 started. Waiting up to 60 seconds for error...
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:50:50 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:50:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:50:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:50:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:50:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:50:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:50:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:50:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:50:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:50:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:50:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:50:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:50:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:50:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:50:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:50:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:50:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:50:51 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:50:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:50:51 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:50:51 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:50:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:50:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:50:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:50:51 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:50:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:50:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:50:51 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:50:51 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:50:51 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:50:51 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:50:51 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:50:51 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:50:51 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:50:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:50:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:50:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:50:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:50:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:50:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:50:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:50:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:50:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2522] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2527] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2532] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2633] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2673] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2682] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2799] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2819] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2845] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2850] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2851] Config: added 'scan_ssid' value '1'
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2852] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2853] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.2854] Config: added 'psk' value '<hidden>'
Oct 11 03:51:02 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/91
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.3601] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:51:02 IQ138000 NetworkManager[404]: <info>  [1760154662.3603] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:51:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:51:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:51:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:51:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:51:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:51:13 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:51:13 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:51:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:51:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:51:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:21 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:51:21 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:51:21 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:51:21 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:51:21 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:51:21 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:51:21 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:51:21 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:51:21 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:51:21 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:51:21 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:51:21 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:51:21 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:51:21 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:51:21 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:51:21 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:51:21 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:51:21 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:51:21 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:51:21 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:51:21 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:51:21 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:51:21 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:51:21 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:51:21 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:51:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:51:21 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:51:21 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:51:21 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:51:21 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:51:21 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:51:21 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:51:21 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:51:21 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:51:21 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:51:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:27 IQ138000 NetworkManager[404]: <warn>  [1760154687.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:51:27 IQ138000 NetworkManager[404]: <info>  [1760154687.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:51:27 IQ138000 NetworkManager[404]: <warn>  [1760154687.5342] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:51:27 IQ138000 NetworkManager[404]: <info>  [1760154687.5357] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:51:27 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/91
Oct 11 03:51:27 IQ138000 NetworkManager[404]: <info>  [1760154687.5931] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:51:27 IQ138000 NetworkManager[404]: <info>  [1760154687.5933] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:51:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:34 IQ138000 NetworkManager[404]: <info>  [1760154694.0357] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:51:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:34 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 03:51:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:51:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L1, row count 7183, limit 7042
Oct 11 03:51:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L2, row count 7183, limit 7042
Oct 11 03:51:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L1, row count 7183, limit 7042
Oct 11 03:51:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L3, row count 7183, limit 7042
Oct 11 03:51:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:51:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:51:47 IQ138000 wb-watchdog[22788]: [INFO] Interval #125 started. Waiting up to 60 seconds for error...
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:51:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:51:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:51:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:51:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:51:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:51:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:51:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:51:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:51:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:51:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:51:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:51:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:51:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:51:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:51:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:51:51 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:51:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:51:51 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:51:51 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:51:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:51:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:51:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:51:51 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:51:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:51:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:51:51 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:51:51 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:51:51 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:51:51 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:51:51 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:51:51 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:51:51 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:51:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:51:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:51:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:51:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:51:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:51:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:51:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:52:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:52:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:21 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:52:21 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:52:21 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:52:21 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:52:21 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:52:21 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:52:21 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:52:21 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:52:21 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:52:21 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:52:21 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:52:21 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:52:21 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:52:21 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:52:21 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:52:21 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:52:21 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:52:21 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:52:21 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:52:21 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:52:21 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:52:21 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:52:21 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:52:21 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:52:21 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:52:21 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:52:21 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:52:21 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:52:21 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:52:21 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:52:21 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:52:21 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:52:21 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:52:21 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:52:21 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:52:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:52:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:52:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:52:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:52:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:52:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:52:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4345] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4376] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4383] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4441] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4463] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4468] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4602] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4622] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4659] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4662] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4664] Config: added 'scan_ssid' value '1'
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4664] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4666] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.4667] Config: added 'psk' value '<hidden>'
Oct 11 03:52:29 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/92
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.5371] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:52:29 IQ138000 NetworkManager[404]: <info>  [1760154749.5389] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:52:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:52:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:52:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:52:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:52:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:52:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:52:47 IQ138000 wb-watchdog[23482]: [INFO] Interval #126 started. Waiting up to 60 seconds for error...
Oct 11 03:52:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:51 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:52:51 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:52:51 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:52:51 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:52:51 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:52:51 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:52:51 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:52:51 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:52:51 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:52:51 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:52:51 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:52:51 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:52:51 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:52:51 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:52:51 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:52:51 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:52:51 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:52:51 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:52:51 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:52:51 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:52:51 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:52:51 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:52:51 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:52:51 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:52:51 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:52:51 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:52:51 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:52:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:52:52 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:52:52 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:52:52 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:52:52 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:52:52 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:52:52 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:52:52 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:52:52 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:52:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:52:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:52:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:52:54 IQ138000 NetworkManager[404]: <warn>  [1760154774.5314] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:52:54 IQ138000 NetworkManager[404]: <info>  [1760154774.5315] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:52:54 IQ138000 NetworkManager[404]: <warn>  [1760154774.5348] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:52:54 IQ138000 NetworkManager[404]: <info>  [1760154774.5362] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:52:54 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/92
Oct 11 03:52:54 IQ138000 NetworkManager[404]: <info>  [1760154774.5783] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:52:54 IQ138000 NetworkManager[404]: <info>  [1760154774.5785] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:52:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:00 IQ138000 NetworkManager[404]: <info>  [1760154780.2101] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:53:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:53:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:53:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:08 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:53:08 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:53:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:53:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:53:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:21 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:53:21 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:53:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:53:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:53:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:53:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:53:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:53:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:53:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:53:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:53:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:53:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:53:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:53:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:53:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:53:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:53:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:53:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:53:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:53:22 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:53:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:53:22 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:53:22 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:53:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:53:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:53:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:53:22 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:53:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:53:22 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:53:22 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:53:22 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:53:22 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:53:22 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:53:22 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:53:22 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:53:22 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:53:22 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:53:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L1, row count 7183, limit 7042
Oct 11 03:53:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:53:47 IQ138000 wb-watchdog[24100]: [INFO] Interval #127 started. Waiting up to 60 seconds for error...
Oct 11 03:53:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:53:52 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:53:52 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:53:52 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:53:52 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:53:52 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:53:52 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:53:52 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:53:52 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:53:52 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:53:52 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:53:52 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:53:52 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:53:52 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:53:52 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:53:52 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:53:52 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:53:52 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:53:52 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:53:52 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:53:52 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:53:52 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:53:52 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:53:52 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:53:52 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:53:52 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:53:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:53:52 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:53:52 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:53:52 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:53:52 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:53:52 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:53:52 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:53:52 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:53:52 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:53:52 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:53:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:53:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:53:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4492] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4497] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4503] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4591] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4620] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4622] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4716] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4744] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4773] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4776] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4777] Config: added 'scan_ssid' value '1'
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4778] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4780] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.4781] Config: added 'psk' value '<hidden>'
Oct 11 03:53:55 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/93
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.5524] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:53:55 IQ138000 NetworkManager[404]: <info>  [1760154835.5526] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:53:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:53:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:53:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:54:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:54:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:54:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:54:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:54:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:54:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:54:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 1, row count 7183, limit 7042
Oct 11 03:54:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L3, row count 7183, limit 7042
Oct 11 03:54:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 4, row count 7183, limit 7042
Oct 11 03:54:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 3, row count 7183, limit 7042
Oct 11 03:54:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:54:20 IQ138000 NetworkManager[404]: <warn>  [1760154860.5315] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:54:20 IQ138000 NetworkManager[404]: <info>  [1760154860.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:54:20 IQ138000 NetworkManager[404]: <warn>  [1760154860.5350] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:54:20 IQ138000 NetworkManager[404]: <info>  [1760154860.5365] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:54:20 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/93
Oct 11 03:54:20 IQ138000 NetworkManager[404]: <info>  [1760154860.5759] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:54:20 IQ138000 NetworkManager[404]: <info>  [1760154860.5761] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:54:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:54:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:54:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:22 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:54:22 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:54:22 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:54:22 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:54:22 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:54:22 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:54:22 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:54:22 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:54:22 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:54:22 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:54:22 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:54:22 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:54:22 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:54:22 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:54:22 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:54:22 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:54:22 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:54:22 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:54:22 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:54:22 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:54:22 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:54:22 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:54:22 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:54:22 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:54:22 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:54:22 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:54:22 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:54:22 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:54:22 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:54:22 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:54:22 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:54:22 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:54:22 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:54:22 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:54:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:54:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:54:26 IQ138000 NetworkManager[404]: <info>  [1760154866.2093] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:54:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:54:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:54:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:54:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:54:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:54:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:54:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:54:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:54:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:54:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:54:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:54:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:54:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:54:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:54:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:54:47 IQ138000 wb-watchdog[24802]: [INFO] Interval #128 started. Waiting up to 60 seconds for error...
Oct 11 03:54:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:54:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:54:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:54:52 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:54:52 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:54:52 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:54:52 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:54:52 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:54:52 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:54:52 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:54:52 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:54:52 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:54:52 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:54:52 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:54:52 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:54:52 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:54:52 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:54:52 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:54:52 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:54:52 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:54:52 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:54:52 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:54:52 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:54:52 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:54:52 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:54:52 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:54:52 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:54:52 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:54:52 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:54:52 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:54:52 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:54:52 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:54:52 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:54:52 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:54:52 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:54:52 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:54:52 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:54:52 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:54:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:55:01 IQ138000 CRON[25013]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 03:55:01 IQ138000 CRON[25017]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 03:55:01 IQ138000 CRON[25013]: pam_unix(cron:session): session closed for user root
Oct 11 03:55:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:55:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:55:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:55:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:55:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:55:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:55:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.3895] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.3938] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.3945] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:55:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4009] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4026] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4028] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4138] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4159] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4176] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4180] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4181] Config: added 'scan_ssid' value '1'
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4181] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4182] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4183] Config: added 'psk' value '<hidden>'
Oct 11 03:55:21 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/94
Oct 11 03:55:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4951] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:55:21 IQ138000 NetworkManager[404]: <info>  [1760154921.4953] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:55:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:22 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:55:23 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:55:23 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:55:23 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:55:23 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:55:23 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:55:23 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:55:23 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:55:23 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:55:23 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:55:23 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:55:23 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:55:23 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:55:23 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:55:23 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:55:23 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:55:23 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:55:23 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:55:23 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:55:23 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:55:23 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:55:23 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:55:23 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:55:23 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:55:23 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:55:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:55:23 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:55:23 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:55:23 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:55:23 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:55:23 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:55:23 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:55:23 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:55:23 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:55:23 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:55:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:55:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4664 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:55:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:36 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:55:36 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:55:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:55:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:46 IQ138000 NetworkManager[404]: <warn>  [1760154946.5316] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:55:46 IQ138000 NetworkManager[404]: <info>  [1760154946.5318] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:55:46 IQ138000 NetworkManager[404]: <warn>  [1760154946.5349] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:55:46 IQ138000 NetworkManager[404]: <info>  [1760154946.5365] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:55:46 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/94
Oct 11 03:55:46 IQ138000 NetworkManager[404]: <info>  [1760154946.5891] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:55:46 IQ138000 NetworkManager[404]: <info>  [1760154946.5893] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:55:47 IQ138000 wb-watchdog[25429]: [INFO] Interval #129 started. Waiting up to 60 seconds for error...
Oct 11 03:55:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:55:48 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:55:48 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 NetworkManager[404]: <info>  [1760154952.1847] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:55:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 03:55:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:55:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:55:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:55:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:55:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:55:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:55:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:55:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:55:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:55:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:55:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:55:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:55:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:55:53 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:55:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:55:53 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:55:53 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:55:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:55:53 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:55:53 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:55:53 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:55:53 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:55:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:55:53 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:55:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:55:53 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:55:53 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:55:53 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:55:53 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:55:53 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:55:53 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:55:53 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:55:53 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:55:53 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 03:55:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 03:55:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:55:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:56:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:56:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:56:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:56:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:56:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:56:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 5126 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:56:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:23 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:56:23 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:56:23 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:56:23 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:56:23 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:56:23 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:56:23 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:56:23 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:56:23 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:56:23 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:56:23 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:56:23 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:56:23 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:56:23 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:56:23 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:56:23 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:56:23 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:56:23 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:56:23 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:56:23 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:56:23 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:56:23 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:56:23 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:56:23 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:56:23 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:56:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:56:23 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:56:23 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:56:23 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:56:23 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:56:23 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:56:23 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:56:23 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:56:23 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:56:23 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:56:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:56:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:56:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:56:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:56:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:56:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:56:47 IQ138000 wb-watchdog[26135]: [INFO] Interval #130 started. Waiting up to 60 seconds for error...
Oct 11 03:56:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4079] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4084] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4091] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4152] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4175] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4177] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4283] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4306] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4333] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4337] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4338] Config: added 'scan_ssid' value '1'
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4339] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4341] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.4342] Config: added 'psk' value '<hidden>'
Oct 11 03:56:47 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/95
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.5155] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:56:47 IQ138000 NetworkManager[404]: <info>  [1760155007.5157] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:56:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:56:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:56:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:56:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:56:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:56:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:56:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:56:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:56:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:56:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:56:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:56:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:56:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:56:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:56:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:56:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:56:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:56:53 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:56:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:56:53 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:56:53 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:56:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:56:53 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:56:53 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:56:53 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:56:53 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:56:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:56:53 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:56:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:56:53 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:56:53 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:56:53 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:56:53 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:56:53 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:56:53 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:56:53 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:56:53 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:56:53 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:56:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:56:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:56:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:06 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:57:06 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:57:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:57:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:57:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:57:12 IQ138000 NetworkManager[404]: <warn>  [1760155032.5314] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:57:12 IQ138000 NetworkManager[404]: <info>  [1760155032.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:57:12 IQ138000 NetworkManager[404]: <warn>  [1760155032.5354] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:57:12 IQ138000 NetworkManager[404]: <info>  [1760155032.5368] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:57:12 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/95
Oct 11 03:57:12 IQ138000 NetworkManager[404]: <info>  [1760155032.5877] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:57:12 IQ138000 NetworkManager[404]: <info>  [1760155032.5879] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:57:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:57:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:18 IQ138000 NetworkManager[404]: <info>  [1760155038.1861] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:57:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:57:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:22 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:57:22 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:57:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:23 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:57:23 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:57:23 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:57:23 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:57:23 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:57:23 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:57:23 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:57:23 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:57:23 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:57:23 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:57:23 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:57:23 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:57:23 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:57:23 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:57:23 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:57:23 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:57:23 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:57:23 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:57:23 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:57:23 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:57:23 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:57:23 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:57:23 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:57:23 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:57:23 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:57:23 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:57:23 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:57:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:23 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:57:23 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:57:23 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:57:23 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:57:23 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:57:23 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:57:23 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:57:23 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L1, row count 7183, limit 7042
Oct 11 03:57:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L3, row count 7183, limit 7042
Oct 11 03:57:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:57:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:47 IQ138000 wb-watchdog[26734]: [INFO] Interval #131 started. Waiting up to 60 seconds for error...
Oct 11 03:57:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:47 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:57:47 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:57:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:57:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:57:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:57:54 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:57:54 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:57:54 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:57:54 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:57:54 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:57:54 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:57:54 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:57:54 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:57:54 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:57:54 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:57:54 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:57:54 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:57:54 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:57:54 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:57:54 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:57:54 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:57:54 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:57:54 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:57:54 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:57:54 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:57:54 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:57:54 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:57:54 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:57:54 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:57:54 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:57:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:57:54 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:57:54 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:57:54 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:57:54 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:57:54 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:57:54 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:57:54 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:57:54 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:57:54 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:57:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:57:58 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:57:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:58:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:58:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5205] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5221] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5228] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5282] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5310] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5312] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5426] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5477] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5511] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5529] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5540] Config: added 'scan_ssid' value '1'
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5541] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5542] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.5543] Config: added 'psk' value '<hidden>'
Oct 11 03:58:13 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/96
Oct 11 03:58:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.6303] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:58:13 IQ138000 NetworkManager[404]: <info>  [1760155093.6305] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:58:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:16 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:58:16 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:58:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:58:24 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:58:24 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:58:24 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:58:24 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:58:24 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:58:24 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:58:24 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:58:24 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:58:24 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:58:24 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:58:24 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:58:24 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:58:24 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:58:24 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:58:24 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:58:24 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:58:24 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:58:24 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:58:24 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:58:24 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:58:24 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:58:24 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:58:24 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:58:24 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:58:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:58:24 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:58:24 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:58:24 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:58:24 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:58:24 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:58:24 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:58:24 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:58:24 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:58:24 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:58:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:58:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:29 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:58:29 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:58:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:58:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:38 IQ138000 NetworkManager[404]: <warn>  [1760155118.5314] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 03:58:38 IQ138000 NetworkManager[404]: <info>  [1760155118.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 03:58:38 IQ138000 NetworkManager[404]: <warn>  [1760155118.5349] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 03:58:38 IQ138000 NetworkManager[404]: <info>  [1760155118.5364] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 03:58:38 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/96
Oct 11 03:58:38 IQ138000 NetworkManager[404]: <info>  [1760155118.5794] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 03:58:38 IQ138000 NetworkManager[404]: <info>  [1760155118.5797] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 03:58:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:58:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:44 IQ138000 NetworkManager[404]: <info>  [1760155124.3114] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 03:58:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:47 IQ138000 wb-watchdog[27448]: [INFO] Interval #132 started. Waiting up to 60 seconds for error...
Oct 11 03:58:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:58:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:58:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:58:54 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:58:54 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:58:54 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:58:54 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:58:54 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:58:54 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:58:54 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:58:54 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:58:54 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:58:54 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:58:54 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:58:54 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:58:54 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:58:54 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:58:54 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:58:54 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:58:54 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:58:54 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:58:54 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:58:54 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:58:54 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:58:54 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:58:54 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:58:54 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:58:54 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:58:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:58:54 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:58:54 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:58:54 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:58:54 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:58:54 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:58:54 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:58:54 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:58:54 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:58:54 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:58:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:58:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:58:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:58:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:58:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:58:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:58:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:59:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:59:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:59:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:59:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:59:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 03:59:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:59:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:59:24 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:59:24 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:59:24 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:59:24 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:59:24 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:59:24 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:59:24 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:59:24 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:59:24 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:59:24 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:59:24 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:59:24 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:59:24 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:59:24 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:59:24 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:59:24 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:59:24 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:59:24 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:59:24 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:59:24 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:59:24 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:59:24 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:59:24 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:59:24 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:59:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:59:24 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:59:24 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:59:24 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:59:24 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:59:24 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:59:24 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:59:24 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:59:24 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:59:24 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:59:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:59:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:59:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:59:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:59:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L3, row count 7183, limit 7042
Oct 11 03:59:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L1, row count 7183, limit 7042
Oct 11 03:59:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L2, row count 7183, limit 7042
Oct 11 03:59:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:59:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5154] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5159] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5165] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5263] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5280] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5282] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5375] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5397] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5415] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5418] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5419] Config: added 'scan_ssid' value '1'
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5420] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5421] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.5422] Config: added 'psk' value '<hidden>'
Oct 11 03:59:39 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/97
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.6185] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 03:59:39 IQ138000 NetworkManager[404]: <info>  [1760155179.6187] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 03:59:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:59:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 03:59:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 03:59:48 IQ138000 wb-watchdog[28055]: [INFO] Interval #133 started. Waiting up to 60 seconds for error...
Oct 11 03:59:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 03:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:59:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:59:54 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 03:59:54 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 03:59:54 IQ138000 python3[1970]:    --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 03:59:54 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 03:59:54 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 03:59:54 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 03:59:54 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 03:59:54 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 03:59:54 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 03:59:54 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 03:59:54 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 03:59:54 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 03:59:54 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 03:59:54 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 03:59:54 IQ138000 python3[1970]:            |                state: connected
Oct 11 03:59:54 IQ138000 python3[1970]:            |          power state: on
Oct 11 03:59:54 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 03:59:54 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 03:59:54 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 03:59:54 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 03:59:54 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 03:59:54 IQ138000 python3[1970]:            |         registration: home
Oct 11 03:59:54 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:59:54 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 03:59:54 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 03:59:54 IQ138000 python3[1970]:   --------------------------------
Oct 11 03:59:54 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 03:59:54 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:59:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:55 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 03:59:55 IQ138000 python3[1970]:    -------------------------------
Oct 11 03:59:55 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 03:59:55 IQ138000 python3[1970]:   -------------------------------
Oct 11 03:59:55 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 03:59:55 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 03:59:55 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 03:59:55 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 03:59:55 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 03:59:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:59:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 03:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 03:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 03:59:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:04 IQ138000 NetworkManager[404]: <warn>  [1760155204.5316] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:00:04 IQ138000 NetworkManager[404]: <info>  [1760155204.5318] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:00:04 IQ138000 NetworkManager[404]: <warn>  [1760155204.5349] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:00:04 IQ138000 NetworkManager[404]: <info>  [1760155204.5363] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:00:04 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/97
Oct 11 04:00:04 IQ138000 NetworkManager[404]: <info>  [1760155204.5760] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:00:04 IQ138000 NetworkManager[404]: <info>  [1760155204.5762] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:00:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:00:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:00:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:00:10 IQ138000 NetworkManager[404]: <info>  [1760155210.2846] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:00:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:00:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:00:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:00:22 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:00:22 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 07:00:23.005+00:00
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T07:00:23.005Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760155403017,"cmd_timestamp_ms":1760155223017,"source":"schedule"}
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760155403017,"cmd_timestamp_ms":1760155223017,"source":"schedule"}
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 07:00:23.054+00:00
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T07:00:23.054Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760155403067,"cmd_timestamp_ms":1760155223067,"source":"schedule"}
Oct 11 04:00:23 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760155403067,"cmd_timestamp_ms":1760155223067,"source":"schedule"}
Oct 11 04:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:24 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 04:00:24 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 04:00:24 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 04:00:24 IQ138000 wb-rules[6073]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 04:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:00:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:25 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:00:25 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:00:25 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:00:25 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:00:25 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:00:25 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:00:25 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:00:25 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:00:25 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:00:25 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:00:25 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:00:25 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:00:25 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:00:25 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:00:25 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:00:25 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:00:25 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:00:25 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:00:25 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:00:25 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:00:25 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:00:25 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:00:25 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:00:25 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:00:25 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:00:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:00:25 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:00:25 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:00:25 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:00:25 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:00:25 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:00:25 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:00:25 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:00:25 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:00:25 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:00:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:00:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:00:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:00:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:00:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:00:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:00:46 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:00:46 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:00:47 IQ138000 wb-watchdog[28783]: [INFO] Interval #134 started. Waiting up to 60 seconds for error...
Oct 11 04:00:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 04:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:00:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:00:55 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:00:55 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:00:55 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:00:55 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:00:55 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:00:55 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:00:55 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:00:55 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:00:55 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:00:55 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:00:55 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:00:55 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:00:55 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:00:55 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:00:55 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:00:55 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:00:55 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:00:55 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:00:55 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:00:55 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:00:55 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:00:55 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:00:55 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:00:55 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:00:55 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:00:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:00:55 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:00:55 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:00:55 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:00:55 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:00:55 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:00:55 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:00:55 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:00:55 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:00:55 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:00:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:00:57 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:00:57 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:00:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:00:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:00:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:01:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:01:02 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:01:02 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4302] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4307] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4313] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4362] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4385] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4387] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4521] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4577] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4598] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4602] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4603] Config: added 'scan_ssid' value '1'
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4604] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4606] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.4606] Config: added 'psk' value '<hidden>'
Oct 11 04:01:05 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/98
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.5278] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:01:05 IQ138000 NetworkManager[404]: <info>  [1760155265.5280] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:01:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:01:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:25 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:01:25 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:01:25 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:01:25 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:01:25 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:01:25 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:01:25 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:01:25 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:01:25 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:01:25 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:01:25 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:01:25 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:01:25 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:01:25 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:01:25 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:01:25 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:01:25 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:01:25 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:01:25 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:01:25 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:01:25 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:01:25 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:01:25 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:01:25 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:01:25 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:01:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:01:25 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:01:25 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:01:25 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:01:25 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:01:25 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:01:25 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:01:25 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:01:25 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:01:25 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:01:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:01:30 IQ138000 NetworkManager[404]: <warn>  [1760155290.5310] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:01:30 IQ138000 NetworkManager[404]: <info>  [1760155290.5312] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:01:30 IQ138000 NetworkManager[404]: <warn>  [1760155290.5371] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:01:30 IQ138000 NetworkManager[404]: <info>  [1760155290.5383] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:01:30 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/98
Oct 11 04:01:30 IQ138000 NetworkManager[404]: <info>  [1760155290.5857] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:01:30 IQ138000 NetworkManager[404]: <info>  [1760155290.5859] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:01:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:01:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:01:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:01:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L1, row count 7183, limit 7042
Oct 11 04:01:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:01:36 IQ138000 NetworkManager[404]: <info>  [1760155296.1879] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:01:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:01:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:01:42 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:01:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:01:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:47 IQ138000 wb-watchdog[29394]: [INFO] Interval #135 started. Waiting up to 60 seconds for error...
Oct 11 04:01:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:01:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:01:55 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:01:55 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:01:55 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:01:55 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:01:55 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:01:55 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:01:55 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:01:55 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:01:55 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:01:55 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:01:55 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:01:55 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:01:55 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:01:55 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:01:55 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:01:55 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:01:55 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:01:55 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:01:55 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:01:55 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:01:55 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:01:55 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:01:55 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:01:55 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:01:55 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:01:55 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:01:55 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:01:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:01:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:01:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:01:55 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:01:55 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:01:55 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:01:55 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:01:55 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:01:55 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:01:55 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:01:55 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:01:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:01:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:01:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:02:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:02:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:02:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:02:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:02:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:25 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:02:25 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:02:25 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:02:25 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:02:25 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:02:25 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:02:25 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:02:25 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:02:25 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:02:25 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:02:25 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:02:25 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:02:25 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:02:25 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:02:25 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:02:25 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:02:25 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:02:25 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:02:25 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:02:25 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:02:25 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:02:25 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:02:25 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:02:25 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:02:25 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:02:25 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:25 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:02:25 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:02:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:26 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:02:26 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:02:26 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:02:26 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:02:26 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:02:26 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:02:26 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:02:26 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:02:26 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:02:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4155] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4160] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4166] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4314] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4340] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4342] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4509] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4541] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4568] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4574] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4575] Config: added 'scan_ssid' value '1'
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4576] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4577] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.4579] Config: added 'psk' value '<hidden>'
Oct 11 04:02:31 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/99
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.5269] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:02:31 IQ138000 NetworkManager[404]: <info>  [1760155351.5272] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:02:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:02:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:02:38 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:02:38 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:02:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:02:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:02:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 8974 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:02:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:02:47 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:02:47 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:02:47 IQ138000 wb-watchdog[30094]: [INFO] Interval #136 started. Waiting up to 60 seconds for error...
Oct 11 04:02:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:02:56 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:02:56 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:02:56 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:02:56 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:02:56 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:02:56 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:02:56 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:02:56 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:02:56 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:02:56 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:02:56 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:02:56 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:02:56 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:02:56 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:02:56 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:02:56 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:02:56 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:02:56 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:02:56 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:02:56 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:02:56 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:02:56 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:02:56 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:02:56 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:02:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:02:56 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:02:56 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:02:56 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:02:56 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:02:56 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:02:56 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:02:56 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:02:56 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:02:56 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:02:56 IQ138000 NetworkManager[404]: <warn>  [1760155376.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:02:56 IQ138000 NetworkManager[404]: <info>  [1760155376.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:02:56 IQ138000 NetworkManager[404]: <warn>  [1760155376.5339] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:02:56 IQ138000 NetworkManager[404]: <info>  [1760155376.5353] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:02:56 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/99
Oct 11 04:02:56 IQ138000 NetworkManager[404]: <info>  [1760155376.5787] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:02:56 IQ138000 NetworkManager[404]: <info>  [1760155376.5790] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:02:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:03:02 IQ138000 NetworkManager[404]: <info>  [1760155382.1825] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:03:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:03:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:03:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:03:04 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:03:04 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:03:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:03:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:03:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:03:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:03:14 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:03:14 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:03:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:26 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:03:26 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:03:26 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:03:26 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:03:26 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:03:26 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:03:26 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:03:26 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:03:26 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:03:26 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:03:26 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:03:26 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:03:26 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:03:26 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:03:26 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:03:26 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:03:26 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:03:26 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:03:26 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:03:26 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:03:26 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:03:26 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:03:26 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:03:26 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:03:26 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:03:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:03:26 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:03:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:26 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:03:26 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:03:26 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:03:26 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:03:26 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:03:26 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:03:26 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:03:26 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:03:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L3, row count 7183, limit 7042
Oct 11 04:03:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L2, row count 7183, limit 7042
Oct 11 04:03:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L1, row count 7183, limit 7042
Oct 11 04:03:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L3, row count 7183, limit 7042
Oct 11 04:03:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:03:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:03:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:03:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:03:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:03:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:03:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:03:47 IQ138000 wb-watchdog[30709]: [INFO] Interval #137 started. Waiting up to 60 seconds for error...
Oct 11 04:03:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:03:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:03:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:03:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:03:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:03:56 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:03:56 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:03:56 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:03:56 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:03:56 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:03:56 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:03:56 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:03:56 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:03:56 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:03:56 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:03:56 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:03:56 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:03:56 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:03:56 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:03:56 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:03:56 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:03:56 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:03:56 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:03:56 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:03:56 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:03:56 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:03:56 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:03:56 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:03:56 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:03:56 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:03:56 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:03:56 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:03:56 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:03:56 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:03:56 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:03:56 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:03:56 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:03:56 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:03:56 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4167] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4172] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4178] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4294] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4333] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4347] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4452] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4493] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4523] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4526] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4527] Config: added 'scan_ssid' value '1'
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4528] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4529] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.4530] Config: added 'psk' value '<hidden>'
Oct 11 04:03:57 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/100
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.5369] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:03:57 IQ138000 NetworkManager[404]: <info>  [1760155437.5371] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:03:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:03:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:04:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:04:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:04:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:04:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:04:11 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:04:11 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:04:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:22 IQ138000 NetworkManager[404]: <warn>  [1760155462.5313] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:04:22 IQ138000 NetworkManager[404]: <info>  [1760155462.5315] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:04:22 IQ138000 NetworkManager[404]: <warn>  [1760155462.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:04:22 IQ138000 NetworkManager[404]: <info>  [1760155462.5354] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:04:22 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/100
Oct 11 04:04:22 IQ138000 NetworkManager[404]: <info>  [1760155462.5810] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:04:22 IQ138000 NetworkManager[404]: <info>  [1760155462.5812] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:04:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:04:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:04:26 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:04:26 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:04:26 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:04:26 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:04:26 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:04:26 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:04:26 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:04:26 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:04:26 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:04:26 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:04:26 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:04:26 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:04:26 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:04:26 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:04:26 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:04:26 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:04:26 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:04:26 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:04:26 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:04:26 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:04:26 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:04:26 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:04:26 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:04:26 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:04:26 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:04:26 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:04:26 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:04:26 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:04:26 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:04:26 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:04:26 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:04:26 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:04:26 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:04:26 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:04:26 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:04:26 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:04:26 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:04:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:04:28 IQ138000 NetworkManager[404]: <info>  [1760155468.1964] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:04:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:04:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:04:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:47 IQ138000 wb-watchdog[31404]: [INFO] Interval #138 started. Waiting up to 60 seconds for error...
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:04:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:04:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:04:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:04:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:56 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:04:57 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:04:57 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:04:57 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:04:57 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:04:57 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:04:57 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:04:57 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:04:57 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:04:57 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:04:57 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:04:57 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:04:57 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:04:57 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:04:57 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:04:57 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:04:57 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:04:57 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:04:57 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:04:57 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:04:57 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:04:57 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:04:57 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:04:57 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:04:57 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:04:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:04:57 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:04:57 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:04:57 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:04:57 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:04:57 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:04:57 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:04:57 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:04:57 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:04:57 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:04:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:04:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:01 IQ138000 CRON[31615]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 04:05:01 IQ138000 CRON[31625]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 04:05:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:01 IQ138000 CRON[31615]: pam_unix(cron:session): session closed for user root
Oct 11 04:05:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:05:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:05:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:05:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:05:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5029] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5042] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5048] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5112] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5137] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5139] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5250] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5285] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5311] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5315] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5316] Config: added 'scan_ssid' value '1'
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5328] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5331] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.5331] Config: added 'psk' value '<hidden>'
Oct 11 04:05:23 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/101
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.6202] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:05:23 IQ138000 NetworkManager[404]: <info>  [1760155523.6203] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:05:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:05:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:05:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:05:27 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:05:27 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:05:27 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:05:27 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:05:27 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:05:27 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:05:27 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:05:27 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:05:27 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:05:27 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:05:27 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:05:27 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:05:27 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:05:27 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:05:27 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:05:27 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:05:27 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:05:27 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:05:27 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:05:27 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:05:27 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:05:27 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:05:27 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:05:27 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:05:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:05:27 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:05:27 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:05:27 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:05:27 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:05:27 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:05:27 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:05:27 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:05:27 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:05:27 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:05:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:05:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:05:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:05:30 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:05:30 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:05:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:05:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:47 IQ138000 wb-watchdog[32030]: [INFO] Interval #139 started. Waiting up to 60 seconds for error...
Oct 11 04:05:48 IQ138000 NetworkManager[404]: <warn>  [1760155548.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:05:48 IQ138000 NetworkManager[404]: <info>  [1760155548.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:05:48 IQ138000 NetworkManager[404]: <warn>  [1760155548.5349] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:05:48 IQ138000 NetworkManager[404]: <info>  [1760155548.5364] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:05:48 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/101
Oct 11 04:05:48 IQ138000 NetworkManager[404]: <info>  [1760155548.5874] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:05:48 IQ138000 NetworkManager[404]: <info>  [1760155548.5875] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:05:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:05:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:05:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:05:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:05:54 IQ138000 NetworkManager[404]: <info>  [1760155554.2592] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:57 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 04:05:57 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:05:57 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:05:57 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:05:57 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:05:57 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:05:57 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:05:57 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:05:57 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:05:57 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:05:57 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:05:57 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:05:57 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:05:57 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:05:57 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:05:57 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:05:57 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:05:57 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:05:57 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:05:57 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:05:57 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:05:57 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:05:57 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:05:57 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:05:57 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:05:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:05:57 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:57 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:05:57 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:05:57 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:05:57 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:05:57 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:05:57 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:05:57 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:05:57 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:05:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:05:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:06:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:06:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:06:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:06:03 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:06:03 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:06:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:06:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:06:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:06:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:06:27 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:06:27 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:06:27 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:06:27 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:06:27 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:06:27 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:06:27 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:06:27 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:06:27 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:06:27 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:06:27 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:06:27 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:06:27 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:06:27 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:06:27 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:06:27 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:06:27 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:06:27 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:06:27 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:06:27 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:06:27 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:06:27 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:06:27 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:06:27 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:06:27 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:06:27 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:06:27 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:06:27 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:06:27 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:06:27 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:06:27 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:06:27 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:06:27 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:06:27 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:06:27 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:06:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:06:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:06:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:06:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:06:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:06:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:06:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:06:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:06:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:06:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:47 IQ138000 wb-watchdog[32740]: [INFO] Interval #140 started. Waiting up to 60 seconds for error...
Oct 11 04:06:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.3805] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.3809] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.3818] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.3894] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.3919] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.3920] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4025] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4054] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4075] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4079] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4081] Config: added 'scan_ssid' value '1'
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4082] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4084] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4085] Config: added 'psk' value '<hidden>'
Oct 11 04:06:49 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/102
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4855] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:06:49 IQ138000 NetworkManager[404]: <info>  [1760155609.4857] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:06:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:06:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:06:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:06:57 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:06:57 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:06:57 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:06:57 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:06:57 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:06:57 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:06:57 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:06:57 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:06:57 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:06:57 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:06:57 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:06:57 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:06:57 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:06:57 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:06:57 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:06:57 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:06:57 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:06:57 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:06:57 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:06:57 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:06:57 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:06:57 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:06:57 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:06:57 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:06:57 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:06:57 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:06:57 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:06:57 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:06:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:06:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:06:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:06:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:06:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:06:58 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:06:58 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:06:58 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:06:58 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:06:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:06:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:06:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:06:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:06:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:07:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:07:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:07:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:07:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:07:14 IQ138000 NetworkManager[404]: <warn>  [1760155634.5314] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:07:14 IQ138000 NetworkManager[404]: <info>  [1760155634.5316] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:07:14 IQ138000 NetworkManager[404]: <warn>  [1760155634.5356] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:07:14 IQ138000 NetworkManager[404]: <info>  [1760155634.5383] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:07:14 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/102
Oct 11 04:07:14 IQ138000 NetworkManager[404]: <info>  [1760155634.5848] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:07:14 IQ138000 NetworkManager[404]: <info>  [1760155634.5861] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:07:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:07:15 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:07:15 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:07:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:20 IQ138000 NetworkManager[404]: <info>  [1760155640.2033] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:07:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:07:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:07:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:07:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:07:25 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:07:25 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:07:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:28 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:28 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:07:28 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:07:28 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:07:28 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:07:28 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:07:28 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:07:28 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:07:28 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:07:28 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:07:28 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:07:28 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:07:28 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:07:28 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:07:28 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:07:28 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:07:28 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:07:28 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:07:28 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:07:28 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:07:28 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:07:28 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:07:28 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:07:28 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:07:28 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:07:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:07:28 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:28 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:07:28 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:07:28 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:07:28 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:07:28 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:07:28 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:07:28 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:07:28 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:07:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:07:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:07:33 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:07:33 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:07:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:07:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:07:45 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:07:45 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:07:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:07:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:47 IQ138000 wb-watchdog[897]: [INFO] Interval #141 started. Waiting up to 60 seconds for error...
Oct 11 04:07:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:07:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:07:56 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:07:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:58 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:07:58 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:07:58 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:07:58 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:07:58 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:07:58 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:07:58 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:07:58 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:07:58 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:07:58 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:07:58 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:07:58 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:07:58 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:07:58 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:07:58 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:07:58 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:07:58 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:07:58 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:07:58 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:07:58 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:07:58 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:07:58 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:07:58 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:07:58 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:07:58 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:07:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:07:58 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:07:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:07:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:07:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:07:58 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:07:58 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:07:58 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:07:58 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:07:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:07:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:02 IQ138000 CRON[1109]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 04:08:02 IQ138000 CRON[1113]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 04:08:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:03 IQ138000 sSMTP[1124]: Unable to locate mail
Oct 11 04:08:03 IQ138000 sSMTP[1124]: Cannot open mail:25
Oct 11 04:08:03 IQ138000 cron[1124]: sendmail: Cannot open mail:25
Oct 11 04:08:03 IQ138000 CRON[1109]: (root) MAIL (mailed 368 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 04:08:03 IQ138000 CRON[1109]: pam_unix(cron:session): session closed for user root
Oct 11 04:08:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:08:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.4958] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.4972] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.4980] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5095] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5129] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5142] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5307] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:08:15 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/103
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5407] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5481] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5486] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5488] Config: added 'scan_ssid' value '1'
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5489] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5492] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.5493] Config: added 'psk' value '<hidden>'
Oct 11 04:08:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.6219] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:08:15 IQ138000 NetworkManager[404]: <info>  [1760155695.6224] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:08:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L1, row count 7183, limit 7042
Oct 11 04:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 8756 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:08:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:28 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:08:28 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:08:28 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:08:28 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:08:28 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:08:28 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:08:28 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:08:28 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:08:28 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:08:28 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:08:28 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:08:28 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:08:28 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:08:28 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:08:28 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:08:28 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:08:28 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:08:28 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:08:28 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:08:28 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:08:28 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:08:28 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:08:28 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:08:28 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:08:28 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:08:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:08:28 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:08:28 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:08:28 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:08:28 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:08:28 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:08:28 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:08:28 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:08:28 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:08:28 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:08:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:08:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:08:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:08:37 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:08:37 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:08:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:40 IQ138000 NetworkManager[404]: <warn>  [1760155720.5308] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:08:40 IQ138000 NetworkManager[404]: <info>  [1760155720.5310] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:08:40 IQ138000 NetworkManager[404]: <warn>  [1760155720.5336] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:08:40 IQ138000 NetworkManager[404]: <info>  [1760155720.5348] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:08:40 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/103
Oct 11 04:08:40 IQ138000 NetworkManager[404]: <info>  [1760155720.5808] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:08:40 IQ138000 NetworkManager[404]: <info>  [1760155720.5810] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:08:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:08:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:08:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:08:43 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:08:43 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:08:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:46 IQ138000 NetworkManager[404]: <info>  [1760155726.2943] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:08:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:47 IQ138000 wb-watchdog[1620]: [INFO] Interval #142 started. Waiting up to 60 seconds for error...
Oct 11 04:08:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:08:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:08:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:08:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:08:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:08:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:08:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:08:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:58 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:08:58 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:08:58 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:08:58 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:08:58 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:08:58 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:08:58 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:08:58 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:08:58 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:08:58 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:08:58 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:08:58 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:08:58 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:08:58 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:08:58 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:08:58 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:08:58 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:08:58 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:08:58 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:08:58 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:08:58 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:08:58 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:08:58 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:08:58 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:08:58 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:08:58 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:08:58 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:08:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:08:58 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:08:58 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:08:58 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:08:58 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:08:58 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:08:58 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:08:58 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:08:58 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:08:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:08:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:08:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:09:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:06 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:09:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:09:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:27 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:09:27 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:09:27 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:09:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:09:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:28 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:09:28 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:09:28 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:09:28 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:09:28 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:09:28 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:09:28 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:09:28 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:09:28 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:09:28 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:09:28 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:09:28 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:09:28 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:09:28 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:09:28 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:09:28 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:09:28 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:09:28 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:09:28 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:09:28 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:09:28 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:09:28 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:09:28 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:09:28 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:09:28 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:09:28 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:28 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:09:28 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:09:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:09:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:09:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:09:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:09:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:09:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:09:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:09:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:09:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:09:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_38/External Sensor 1, row count 7183, limit 7042
Oct 11 04:09:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:09:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5355] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5361] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5368] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5480] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5501] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5503] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5592] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5615] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5638] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5643] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5645] Config: added 'scan_ssid' value '1'
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5646] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5649] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.5662] Config: added 'psk' value '<hidden>'
Oct 11 04:09:41 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/104
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.6431] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:09:41 IQ138000 NetworkManager[404]: <info>  [1760155781.6434] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:09:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:47 IQ138000 wb-watchdog[2280]: [INFO] Interval #143 started. Waiting up to 60 seconds for error...
Oct 11 04:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:09:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:09:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:09:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:09:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 04:09:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:59 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:09:59 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:09:59 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:09:59 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:09:59 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:09:59 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:09:59 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:09:59 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:09:59 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:09:59 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:09:59 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:09:59 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:09:59 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:09:59 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:09:59 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:09:59 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:09:59 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:09:59 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:09:59 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:09:59 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:09:59 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:09:59 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:09:59 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:09:59 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:09:59 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:09:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:09:59 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:09:59 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:09:59 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:09:59 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:09:59 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:09:59 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:09:59 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:09:59 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:09:59 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:09:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:09:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:10:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:10:00 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:10:00 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:10:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:10:06 IQ138000 NetworkManager[404]: <warn>  [1760155806.5312] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:10:06 IQ138000 NetworkManager[404]: <info>  [1760155806.5314] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:10:06 IQ138000 NetworkManager[404]: <warn>  [1760155806.5351] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:10:06 IQ138000 NetworkManager[404]: <info>  [1760155806.5365] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:10:06 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/104
Oct 11 04:10:06 IQ138000 NetworkManager[404]: <info>  [1760155806.5811] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:10:06 IQ138000 NetworkManager[404]: <info>  [1760155806.5814] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:10:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:10:12 IQ138000 NetworkManager[404]: <info>  [1760155812.3381] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:10:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:10:12 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:10:12 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:10:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:14 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:10:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L2, row count 7183, limit 7042
Oct 11 04:10:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:19 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:10:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:29 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:10:29 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:10:29 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:10:29 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:10:29 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:10:29 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:10:29 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:10:29 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:10:29 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:10:29 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:10:29 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:10:29 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:10:29 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:10:29 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:10:29 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:10:29 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:10:29 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:10:29 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:10:29 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:10:29 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:10:29 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:10:29 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:10:29 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:10:29 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:10:29 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:10:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:10:29 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:10:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:10:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:10:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:10:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:10:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:10:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:10:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:10:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:10:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:10:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:10:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:41 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:42 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:45 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 5892 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:10:46 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:47 IQ138000 wb-watchdog[3011]: [INFO] Interval #144 started. Waiting up to 60 seconds for error...
Oct 11 04:10:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:10:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:10:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:10:59 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:10:59 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:10:59 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:10:59 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:10:59 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:10:59 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:10:59 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:10:59 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:10:59 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:10:59 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:10:59 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:10:59 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:10:59 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:10:59 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:10:59 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:10:59 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:10:59 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:10:59 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:10:59 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:10:59 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:10:59 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:10:59 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:10:59 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:10:59 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:10:59 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:10:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:10:59 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:10:59 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:10:59 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:10:59 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:10:59 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:10:59 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:10:59 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:10:59 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:10:59 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:10:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:10:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5529] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5543] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5550] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5615] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5632] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5635] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5729] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5748] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5765] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5770] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5771] Config: added 'scan_ssid' value '1'
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5772] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5774] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.5775] Config: added 'psk' value '<hidden>'
Oct 11 04:11:07 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/105
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.6531] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:11:07 IQ138000 NetworkManager[404]: <info>  [1760155867.6540] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:11:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:10 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:11:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:11:15 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:11:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:11:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:11:18 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:11:18 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:11:20 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:21 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:22 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:23 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:11:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:11:26 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:11:26 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:11:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:29 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:11:29 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:11:29 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:11:29 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:11:29 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:11:29 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:11:29 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:11:29 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:11:29 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:11:29 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:11:29 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:11:29 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:11:29 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:11:29 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:11:29 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:11:29 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:11:29 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:11:29 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:11:29 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:11:29 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:11:29 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:11:29 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:11:29 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:11:29 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:11:29 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:11:29 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:11:29 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:11:29 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:11:29 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:11:29 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:11:29 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:11:29 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:11:29 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:11:29 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:11:29 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:11:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:32 IQ138000 NetworkManager[404]: <warn>  [1760155892.5315] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:11:32 IQ138000 NetworkManager[404]: <info>  [1760155892.5317] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:11:32 IQ138000 NetworkManager[404]: <warn>  [1760155892.5347] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:11:32 IQ138000 NetworkManager[404]: <info>  [1760155892.5364] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:11:32 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/105
Oct 11 04:11:32 IQ138000 NetworkManager[404]: <info>  [1760155892.5793] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:11:32 IQ138000 NetworkManager[404]: <info>  [1760155892.5795] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:11:33 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:34 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:35 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L2, row count 7183, limit 7042
Oct 11 04:11:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:38 IQ138000 NetworkManager[404]: <info>  [1760155898.3150] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8671 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:11:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:38 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:43 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:44 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:11:44 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:47 IQ138000 wb-watchdog[3648]: [INFO] Interval #145 started. Waiting up to 60 seconds for error...
Oct 11 04:11:47 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:11:48 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:11:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:49 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 04:11:50 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:51 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:52 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:11:53 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:11:53 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:53 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:11:54 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:11:55 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:11:55 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:11:55 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:11:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:11:57 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:58 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:11:59 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:11:59 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:11:59 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:11:59 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:11:59 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:11:59 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:11:59 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:11:59 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:11:59 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:11:59 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:11:59 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:11:59 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:11:59 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:11:59 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:11:59 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:11:59 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:11:59 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:11:59 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:11:59 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:11:59 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:11:59 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:11:59 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:11:59 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:11:59 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:11:59 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:11:59 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:11:59 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:12:00 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:12:00 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:00 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:12:00 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:12:00 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:12:00 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:12:00 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:12:00 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:12:00 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:12:00 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:12:00 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:12:00 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:12:00 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:12:00 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:01 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:02 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:12:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:12:03 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:04 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:12:05 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:12:05 IQ138000 wb-mqtt-serial[1671]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:12:05 IQ138000 wb-mqtt-serial[1671]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:12:07 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:12:08 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:09 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:11 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:12 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:13 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:16 IQ138000 wb-mqtt-db[1997]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L3, row count 7183, limit 7042
Oct 11 04:12:16 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:17 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:18 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:24 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:25 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:12:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:26 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:28 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:29 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:12:30 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 04:12:30 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:12:30 IQ138000 python3[1970]:    --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 04:12:30 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:12:30 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 04:12:30 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:12:30 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 04:12:30 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 04:12:30 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 04:12:30 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 04:12:30 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 04:12:30 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 04:12:30 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:12:30 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:12:30 IQ138000 python3[1970]:            |                state: connected
Oct 11 04:12:30 IQ138000 python3[1970]:            |          power state: on
Oct 11 04:12:30 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 04:12:30 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:12:30 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 04:12:30 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 04:12:30 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 04:12:30 IQ138000 python3[1970]:            |         registration: home
Oct 11 04:12:30 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:12:30 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 04:12:30 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 04:12:30 IQ138000 python3[1970]:   --------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 04:12:30 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:12:30 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 04:12:30 IQ138000 python3[1970]:    -------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 04:12:30 IQ138000 python3[1970]:   -------------------------------
Oct 11 04:12:30 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 04:12:30 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 04:12:30 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 04:12:30 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 04:12:30 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 04:12:30 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:31 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:32 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4366] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4375] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8671 uid=0 result="success"
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4384] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4477] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4499] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4501] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4642] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4707] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4724] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4728] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4729] Config: added 'scan_ssid' value '1'
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4729] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4731] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.4731] Config: added 'psk' value '<hidden>'
Oct 11 04:12:33 IQ138000 wb-mqtt-nm-helper[2032]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/106
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.5588] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:12:33 IQ138000 NetworkManager[404]: <info>  [1760155953.5597] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:12:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:12:35 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:36 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:12:37 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:12:39 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:12:40 IQ138000 wb-mqtt-serial[1671]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
-- Boot 380c7ccf0c4f485c88ce66eddb3cf8b5 --
Oct 11 04:14:06 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 04:14:06 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 04:14:06 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 04:14:06 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 04:14:06 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 04:14:06 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 04:14:06 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 04:14:06 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 04:14:06 IQ138000 kernel: Zone ranges:
Oct 11 04:14:06 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 04:14:06 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 04:14:06 IQ138000 kernel: Movable zone start for each node
Oct 11 04:14:06 IQ138000 kernel: Early memory node ranges
Oct 11 04:14:06 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:14:06 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:14:06 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 04:14:06 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 04:14:06 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 04:14:06 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 04:14:06 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 04:14:06 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 04:14:06 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 04:14:06 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 04:14:06 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 04:14:06 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 04:14:06 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 04:14:06 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 04:14:06 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 04:14:06 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 04:14:06 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 04:14:06 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 04:14:06 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 04:14:06 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 04:14:06 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 04:14:06 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 04:14:06 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 04:14:06 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 04:14:06 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 04:14:06 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 04:14:06 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 04:14:06 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 04:14:06 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 04:14:06 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 04:14:06 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 04:14:06 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 04:14:06 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 04:14:06 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 04:14:06 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 04:14:06 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 04:14:06 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 04:14:06 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 04:14:06 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 04:14:06 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 04:14:06 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 04:14:06 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 04:14:06 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 04:14:06 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 04:14:06 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 04:14:06 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 04:14:06 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 04:14:06 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 04:14:06 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 04:14:06 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 04:14:06 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 04:14:06 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 04:14:06 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 04:14:06 IQ138000 kernel: devtmpfs: initialized
Oct 11 04:14:06 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 04:14:06 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 04:14:06 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 04:14:06 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 04:14:06 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 04:14:06 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 04:14:06 IQ138000 kernel: No ATAGs?
Oct 11 04:14:06 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 04:14:06 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 04:14:06 IQ138000 kernel: SCSI subsystem initialized
Oct 11 04:14:06 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 04:14:06 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 04:14:06 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 04:14:06 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 04:14:06 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 04:14:06 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 04:14:06 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 04:14:06 IQ138000 kernel: PTP clock support registered
Oct 11 04:14:06 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 04:14:06 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 04:14:06 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 04:14:06 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 04:14:06 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:14:06 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 04:14:06 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 04:14:06 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 04:14:06 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 04:14:06 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 04:14:06 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 04:14:06 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 04:14:06 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 04:14:06 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 04:14:06 IQ138000 kernel: Key type id_resolver registered
Oct 11 04:14:06 IQ138000 kernel: Key type id_legacy registered
Oct 11 04:14:06 IQ138000 kernel: Key type asymmetric registered
Oct 11 04:14:06 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 04:14:06 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 04:14:06 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 04:14:06 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 04:14:06 IQ138000 kernel: io scheduler kyber registered
Oct 11 04:14:06 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:14:06 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 04:14:06 IQ138000 kernel: brd: module loaded
Oct 11 04:14:06 IQ138000 kernel: loop: module loaded
Oct 11 04:14:06 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 04:14:06 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:14:06 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:14:06 IQ138000 kernel: CAN device driver interface
Oct 11 04:14:06 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 04:14:06 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 04:14:06 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 04:14:06 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 04:14:06 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 04:14:06 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 04:14:06 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 04:14:06 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 04:14:06 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 04:14:06 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 04:14:06 IQ138000 kernel: i2c /dev entries driver
Oct 11 04:14:06 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 04:14:06 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 04:14:06 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 04:14:06 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 04:14:06 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 04:14:06 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 04:14:06 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 04:14:06 IQ138000 kernel: Segment Routing with IPv6
Oct 11 04:14:06 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 04:14:06 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 04:14:06 IQ138000 kernel: can: controller area network core
Oct 11 04:14:06 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 04:14:06 IQ138000 kernel: can: raw protocol
Oct 11 04:14:06 IQ138000 kernel: can: broadcast manager protocol
Oct 11 04:14:06 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 04:14:06 IQ138000 kernel: can: SAE J1939
Oct 11 04:14:06 IQ138000 kernel: Key type dns_resolver registered
Oct 11 04:14:06 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 04:14:06 IQ138000 kernel: registered taskstats version 1
Oct 11 04:14:06 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 04:14:06 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 04:14:06 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 04:14:06 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:14:06 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 04:14:06 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 04:14:06 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 04:14:06 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 04:14:06 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T04:14:02 UTC (1760156042)
Oct 11 04:14:06 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 04:14:06 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:14:06 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 04:14:06 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 04:14:06 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 04:14:06 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 04:14:06 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 04:14:06 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 04:14:06 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 04:14:06 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 04:14:06 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 04:14:06 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 04:14:06 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 04:14:06 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 04:14:06 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: random: fast init done
Oct 11 04:14:06 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 04:14:06 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 04:14:06 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 04:14:06 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 04:14:06 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 04:14:06 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 04:14:06 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 04:14:06 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 04:14:06 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 04:14:06 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:14:06 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:14:06 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 04:14:06 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:14:06 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 04:14:06 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 04:14:06 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 04:14:06 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 04:14:06 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 04:14:06 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 04:14:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 04:14:06 IQ138000 kernel: libphy: stmmac: probed
Oct 11 04:14:06 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:14:06 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 04:14:06 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:14:06 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 04:14:06 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 04:14:06 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:14:06 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 04:14:06 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 04:14:06 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 04:14:06 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 04:14:06 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 04:14:06 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 04:14:06 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:14:06 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 04:14:06 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 04:14:06 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 04:14:06 IQ138000 kernel: of_cfs_init
Oct 11 04:14:06 IQ138000 kernel: of_cfs_init: OK
Oct 11 04:14:06 IQ138000 kernel: ALSA device list:
Oct 11 04:14:06 IQ138000 kernel:   No soundcards found.
Oct 11 04:14:06 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 04:14:06 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 04:14:06 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 04:14:06 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 04:14:06 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 04:14:06 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 04:14:06 IQ138000 kernel: devtmpfs: mounted
Oct 11 04:14:06 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 04:14:06 IQ138000 kernel: Run /sbin/init as init process
Oct 11 04:14:06 IQ138000 kernel:   with arguments:
Oct 11 04:14:06 IQ138000 kernel:     /sbin/init
Oct 11 04:14:06 IQ138000 kernel:   with environment:
Oct 11 04:14:06 IQ138000 kernel:     HOME=/
Oct 11 04:14:06 IQ138000 kernel:     TERM=linux
Oct 11 04:14:06 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 04:14:06 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 04:14:06 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 04:14:06 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 04:14:06 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 04:14:06 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:14:06 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 04:14:06 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:14:06 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 04:14:06 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:14:06 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 04:14:06 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 04:14:06 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 04:14:06 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 04:14:06 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 04:14:06 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:14:06 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 04:14:06 IQ138000 systemd[1]: Reached target Paths.
Oct 11 04:14:06 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 04:14:06 IQ138000 systemd[1]: Reached target Slices.
Oct 11 04:14:06 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 04:14:06 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 04:14:06 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 04:14:06 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 04:14:06 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 04:14:06 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 04:14:06 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 04:14:06 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:14:06 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 04:14:06 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 04:14:06 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 04:14:06 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 04:14:06 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 04:14:06 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 04:14:06 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 04:14:06 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 04:14:06 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:14:06 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 04:14:06 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 04:14:06 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 04:14:06 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 04:14:06 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 04:14:06 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 04:14:06 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 04:14:06 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 04:14:06 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 04:14:06 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 04:14:06 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 04:14:06 IQ138000 systemd-journald[140]: Journal started
Oct 11 04:14:06 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 04:14:06 IQ138000 systemd-fsck[143]: rootfs1: clean, 37044/131072 files, 276734/524288 blocks
Oct 11 04:14:06 IQ138000 systemd[1]: Started Journal Service.
Oct 11 04:14:06 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 04:14:06 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 04:14:07 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 04:14:07 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 04:14:07 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 04:14:07 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 04:14:07 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 04:14:07 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:14:07 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 04:14:07 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 04:14:07 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 04:14:07 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 04:14:07 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 04:14:07 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 04:14:07 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 04:14:07 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 04:14:08 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 04:14:08 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 04:14:08 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 04:14:08 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 04:14:08 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 04:14:08 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 04:14:08 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 04:14:08 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 04:14:08 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 04:14:08 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 04:14:08 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 04:14:08 IQ138000 systemd-udevd[162]: eth1: Failed to query device driver: Device or resource busy
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 04:14:08 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 04:14:08 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 04:14:08 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 04:14:08 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 04:14:08 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 04:14:08 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 04:14:09 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 04:14:09 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 04:14:09 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 04:14:09 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 04:14:09 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 04:14:09 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 04:14:09 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 04:14:09 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 04:14:09 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 04:14:09 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 04:14:09 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 04:14:09 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:14:09 IQ138000 systemd[1]: Reached target Swap.
Oct 11 04:14:09 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 04:14:09 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 04:14:09 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:14:09 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:14:09 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:14:09 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:14:09 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 04:14:09 IQ138000 systemd-fsck[204]: data: recovering journal
Oct 11 04:14:09 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 04:14:09 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 04:14:09 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 04:14:09 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 04:14:09 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 04:14:09 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 04:14:09 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 04:14:09 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 04:14:09 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 04:14:09 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 04:14:09 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:14:09 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:14:10 IQ138000 kernel: random: crng init done
Oct 11 04:14:10 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 04:14:10 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 04:14:10 IQ138000 systemd-fsck[204]: data: clean, 16446/328656 files, 379827/1313536 blocks
Oct 11 04:14:10 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 04:14:10 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 04:14:10 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 04:14:10 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 04:14:10 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 04:14:10 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 04:14:10 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 04:14:10 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 04:14:10 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 04:14:10 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 04:14:10 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.634ms for 465 entries.
Oct 11 04:14:10 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 448.3M, max 496.6M, 48.2M free.
Oct 11 04:14:10 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 04:14:11 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 04:14:11 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 04:14:11 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 04:14:11 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 04:14:11 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 04:14:11 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 04:14:11 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 04:14:11 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 04:14:11 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 04:14:12 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 04:14:12 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 04:14:12 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 04:14:12 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 04:14:12 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 04:14:12 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 04:14:12 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 04:14:12 IQ138000 systemd[1]: Reached target Timers.
Oct 11 04:14:12 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 04:14:12 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 04:14:12 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 04:14:12 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 04:14:12 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 04:14:12 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 04:14:12 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 04:14:12 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 04:14:12 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:14:12 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 04:14:12 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 04:14:12 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 04:14:12 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 04:14:12 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 04:14:12 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 04:14:12 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 04:14:12 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 04:14:12 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:14:12 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 04:14:12 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 04:14:12 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 04:14:12 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 04:14:12 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 04:14:12 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 04:14:12 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 04:14:12 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 04:14:12 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 04:14:12 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 04:14:12 IQ138000 wb-watchdog[323]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 04:14:12 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 04:14:12 IQ138000 migrate.sh[320]: Error: No such file or directory
Oct 11 04:14:12 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:14:12 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:14:12 IQ138000 migrate.sh[330]: Error: No such file or directory
Oct 11 04:14:12 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 04:14:12 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:14:13 IQ138000 reverse-ssh.sh[341]: Error: No such file or directory
Oct 11 04:14:13 IQ138000 systemd[1]: Started watch config files.
Oct 11 04:14:13 IQ138000 polkitd[325]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 04:14:13 IQ138000 migrate.sh[349]: Error: No such file or directory
Oct 11 04:14:13 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 04:14:13 IQ138000 rules-preprocessor[335]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:14:13 IQ138000 rules-preprocessor[335]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:14:13 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 04:14:13 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 04:14:13 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 04:14:13 IQ138000 migrate.sh[361]: Error: No such file or directory
Oct 11 04:14:13 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Successfully dropped root privileges.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: avahi-daemon 0.8 starting up.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Successfully called chroot().
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Successfully dropped remaining capabilities.
Oct 11 04:14:13 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: No service file found in /etc/avahi/services.
Oct 11 04:14:13 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 04:14:13 IQ138000 migrate.sh[374]: Error: No such file or directory
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv6 for mDNS.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv4 for mDNS.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Network interface enumeration completed.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Registering new address record for ::1 on lo.*.
Oct 11 04:14:13 IQ138000 avahi-daemon[365]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 04:14:13 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:14:13 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 04:14:13 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:14:13 IQ138000 systemd-logind[343]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 04:14:13 IQ138000 systemd-logind[343]: New seat seat0.
Oct 11 04:14:13 IQ138000 wpa_supplicant[380]: Successfully initialized wpa_supplicant
Oct 11 04:14:13 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 04:14:13 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 04:14:13 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:13 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 04:14:13 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 04:14:13 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 04:14:13 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:13 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:14:13 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:14:13 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:14:13 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 04:14:13 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 04:14:13 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:13 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:14:13 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 04:14:13 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:14:13 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:14:13 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:14:13 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 04:14:13 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 04:14:13 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 04:14:13 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:14:13 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:14:13 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 04:14:13 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 04:14:13 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 04:14:13 IQ138000 NetworkManager[404]: <info>  [1760156053.9475] NetworkManager (version 1.42.4) is starting... (boot:380c7ccf-0c4f-485c-88ce-66eddb3cf8b5)
Oct 11 04:14:13 IQ138000 NetworkManager[404]: <info>  [1760156053.9510] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 04:14:13 IQ138000 systemd[1]: Started User Login Management.
Oct 11 04:14:13 IQ138000 NetworkManager[404]: <info>  [1760156053.9708] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 04:14:13 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 04:14:13 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 04:14:14 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.0211] manager[0x707128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 04:14:14 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 04:14:14 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 04:14:14 IQ138000 avahi-daemon[365]: Server startup complete. Host name is IQ138000.local. Local service cookie is 54029088.
Oct 11 04:14:14 IQ138000 systemd[1]: Started Network Manager.
Oct 11 04:14:14 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 04:14:14 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 04:14:14 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 04:14:14 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 04:14:14 IQ138000 ModemManager[479]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 04:14:14 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 04:14:14 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6493] hostname: hostname: using hostnamed
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6496] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6567] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6661] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6681] manager[0x707128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6684] manager[0x707128]: rfkill: WWAN hardware radio set enabled
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.6999] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7083] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7114] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7355] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7443] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7468] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7474] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7480] manager: Networking is enabled by state file
Oct 11 04:14:14 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7593] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7619] settings: Loaded settings plugin: keyfile (internal)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7622] ifupdown: management mode: unmanaged
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7624] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.7631] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 04:14:14 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:14:14 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.8618] dhcp: init: Using DHCP client 'internal'
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.8673] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 04:14:14 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:14:14 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.9003] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.9152] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:14:14 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.9447] device (lo): Activation: starting connection 'lo' (6af4dd4a-8b3c-4c71-9050-b4aa39230604)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.9658] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 04:14:14 IQ138000 NetworkManager[404]: <info>  [1760156054.9740] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.3289] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.3312] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.3341] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.3475] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 04:14:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 04:14:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 04:14:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 04:14:15 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.5457] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.5522] device (wlan0): driver supports Access Point (AP) mode
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.5578] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 04:14:15 IQ138000 NetworkManager[404]: <info>  [1760156055.5610] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.3624] device (wlan1): driver supports Access Point (AP) mode
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.3691] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.3783] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.4309] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.4328] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.4342] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.4529] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.4985] modem-manager: ModemManager available
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.4992] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.5005] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.5041] device (lo): Activation: successful, device activated.
Oct 11 04:14:16 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8188] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8196] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8218] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8242] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8407] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8413] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8445] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8466] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8585] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8634] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8688] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:14:16 IQ138000 NetworkManager[404]: <info>  [1760156056.8749] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:17 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 04:14:17 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 04:14:17 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 04:14:20 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 04:14:20 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:14:20 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 04:14:20 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:20 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:14:20 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 04:14:20 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 04:14:20 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 04:14:20 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:20 IQ138000 init.sh[1319]: ...
Oct 11 04:14:20 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 04:14:20 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:21 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 04:14:21 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 04:14:21 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 04:14:21 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 04:14:21 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:21 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:14:21 IQ138000 init.sh[1319]: ...
Oct 11 04:14:21 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 04:14:21 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:22 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 04:14:22 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 04:14:22 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 04:14:22 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 04:14:22 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:22 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 04:14:22 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 04:14:22 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:14:22 IQ138000 init.sh[1319]: ...
Oct 11 04:14:22 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 04:14:22 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 04:14:22 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 04:14:22 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 04:14:22 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 04:14:23 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 04:14:23 IQ138000 systemd[1]: Reached target Network.
Oct 11 04:14:23 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 04:14:23 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 04:14:23 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:14:23 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:14:23 IQ138000 lsyncd[1609]: 04:14:23 Normal: --- Startup ---
Oct 11 04:14:23 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 04:14:23 IQ138000 lsyncd[1609]: 04:14:23 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:14:23 IQ138000 lsyncd[1609]: messages
Oct 11 04:14:23 IQ138000 lsyncd[1609]: iq_network_manager/iq_network_manager.log
Oct 11 04:14:23 IQ138000 lsyncd[1609]: journal
Oct 11 04:14:23 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 04:14:23 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:14:23 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:14:23 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:14:23 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 04:14:23 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 04:14:23 IQ138000 lsyncd[1632]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:14:23 IQ138000 lsyncd[1622]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:14:23 IQ138000 lsyncd[1622]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:14:23 IQ138000 lsyncd[1609]: 04:14:23 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:14:23 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 04:14:23 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 04:14:23 IQ138000 ntpd[1623]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 04:14:23 IQ138000 ntpd[1623]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 04:14:23 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 04:14:23 IQ138000 ntpd[1623]: ntp-4 is maintained by Network Time Foundation,
Oct 11 04:14:23 IQ138000 ntpd[1623]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 04:14:23 IQ138000 ntpd[1623]: corporation.  Support and training for ntp-4 are
Oct 11 04:14:23 IQ138000 ntpd[1623]: available at https://www.nwtime.org/support
Oct 11 04:14:23 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 04:14:23 IQ138000 ntpd[1655]: proto: precision = 1.000 usec (-20)
Oct 11 04:14:23 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 04:14:23 IQ138000 ntpd[1655]: basedate set to 2020-09-11
Oct 11 04:14:23 IQ138000 ntpd[1655]: gps base set to 2020-09-13 (week 2123)
Oct 11 04:14:23 IQ138000 persist_meter_data.sh[1647]: Error: No such file or directory
Oct 11 04:14:23 IQ138000 ntpd[1655]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 04:14:23 IQ138000 ntpd[1655]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 04:14:23 IQ138000 ntpd[1655]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 04:14:23 IQ138000 ntpd[1655]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 04:14:23 IQ138000 ntpd[1655]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 04:14:23 IQ138000 ntpd[1655]: Listen normally on 3 lo [::1]:123
Oct 11 04:14:23 IQ138000 ntpd[1655]: Listening on routing socket on fd #20 for interface updates
Oct 11 04:14:23 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 04:14:23 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 04:14:23 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 04:14:23 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 04:14:23 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 04:14:24 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:14:24 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:14:24 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 04:14:24 IQ138000 wb-mqtt-w1[1685]: MQTT broker localhost:1883
Oct 11 04:14:24 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:24 IQ138000 wb-mqtt-w1[1685]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:14:24 IQ138000 wb-mqtt-w1[1685]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 04:14:24 IQ138000 wb-mqtt-w1[1685]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 04:14:24 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:14:24 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:14:24 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 04:14:24 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 04:14:24 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:14:24 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 04:14:24 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 04:14:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:14:24 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:14:24 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:14:24 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 04:14:24 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:24 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 04:14:24 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 04:14:24 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 04:14:24 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:14:24 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 04:14:24 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 04:14:24 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 04:14:24 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 04:14:24 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 04:14:24 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 04:14:24 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 04:14:24 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 04:14:24 IQ138000 ntpd[1655]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:14:24 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 04:14:24 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 04:14:24 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 04:14:24 IQ138000 vnstatd[1656]: Info: vnStat daemon 2.6 started. (pid:1656 uid:110 gid:117 64-bit)
Oct 11 04:14:24 IQ138000 vnstatd[1656]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 04:14:24 IQ138000 vnstatd[1656]: Info: Interface "ppp0" disabled.
Oct 11 04:14:24 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:24 IQ138000 sshd[1743]: Server listening on 0.0.0.0 port 22.
Oct 11 04:14:24 IQ138000 sshd[1743]: Server listening on :: port 22.
Oct 11 04:14:24 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 04:14:24 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 04:14:25 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 04:14:25 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 04:14:25 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 04:14:25 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 04:14:25 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:14:25 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:14:25 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:25 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:14:25 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 04:14:25 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:14:25 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:14:25 IQ138000 NetworkManager[404]: <error> [1760156065.4446] audit: failed to open auditd socket: Protocol not supported
Oct 11 04:14:25 IQ138000 NetworkManager[404]: <info>  [1760156065.4449] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:14:25 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 04:14:25 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 04:14:25 IQ138000 knxd[1841]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:14:25 IQ138000 knxd[1841]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:14:25 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 04:14:25 IQ138000 wpa_supplicant[380]: wlan0: Reject scan trigger since one is already pending
Oct 11 04:14:25 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 04:14:25 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:14:25 IQ138000 reverse-ssh.sh[1887]: Error: No such file or directory
Oct 11 04:14:25 IQ138000 ntpd[1655]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:14:25 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:25 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:14:25 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:25 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:14:25 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:14:26 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 04:14:26 IQ138000 wb-adjust-systime[1883]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.1553] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.1675] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.1694] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.1733] manager: NetworkManager state is now CONNECTING
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.1838] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2058] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2061] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2249] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2271] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2292] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2316] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2318] Config: added 'scan_ssid' value '1'
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2319] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2321] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.2323] Config: added 'psk' value '<hidden>'
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Warning: Error resolving bridge address: Name or service not known.
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 04:14:26 IQ138000 mosquitto[1926]: 1760156066: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 04:14:26 IQ138000 wb-adjust-systime[1883]: Drift file is valid (was recently edited)
Oct 11 04:14:26 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 04:14:26 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 04:14:26 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 04:14:26 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 04:14:26 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 04:14:26 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 04:14:26 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.6494] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:14:26 IQ138000 NetworkManager[404]: <info>  [1760156066.6496] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:14:26 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 04:14:26 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 04:14:26 IQ138000 ntpd[1655]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:14:26 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 04:14:26 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 04:14:26 IQ138000 wb-mqtt-db[2000]: MQTT broker localhost:1883
Oct 11 04:14:26 IQ138000 wb-mqtt-db[2000]: Config file /etc/wb-mqtt-db.conf
Oct 11 04:14:26 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:26 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:26 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 04:14:27 IQ138000 systemd[1]: Started metrics sender.
Oct 11 04:14:27 IQ138000 wb-mqtt-logs[2031]: MQTT broker localhost:1883
Oct 11 04:14:27 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:27 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:27 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 04:14:27 IQ138000 wb-mqtt-logs[2031]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:27 IQ138000 wb-mqtt-logs[2031]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:27 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] Creating tables if necessary
Oct 11 04:14:27 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] Create indices if necessary
Oct 11 04:14:27 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] Analyzing data table
Oct 11 04:14:27 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 04:14:27 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 04:14:27 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:14:27 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.541s CPU time.
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 04:14:27 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:27 IQ138000 ntpd[1655]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [gpio driver] Started
Oct 11 04:14:27 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:14:27 IQ138000 wb-mqtt-gpio[1815]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:14:27 IQ138000 wb-mqtt-iec104[2009]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:14:27 IQ138000 wb-mqtt-opcua[2061]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:14:28 IQ138000 wb-mqtt-iec104[2009]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 04:14:28 IQ138000 wb-mqtt-iec104[2009]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 04:14:28 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 04:14:28 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 04:14:28 IQ138000 wb-mqtt-confed[1997]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:14:28 IQ138000 wb-mqtt-confed[1997]: INFO: [wbgo_mqtt] confed-IQ138000-1997: MQTT connection established
Oct 11 04:14:28 IQ138000 wb-mqtt-logs[2031]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:28 IQ138000 wb-mqtt-opcua[2190]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 04:14:28 IQ138000 wb-mqtt-logs[2031]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:28 IQ138000 wb-mqtt-logs[2031]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:28 IQ138000 wb-mqtt-logs[2031]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:14:28 IQ138000 wb-mqtt-iec104[2195]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 04:14:29 IQ138000 wb-mqtt-opcua[2190]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 04:14:29 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 04:14:29 IQ138000 wb-mqtt-iec104[2195]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 04:14:29 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 04:14:29 IQ138000 wb-mqtt-mbgate[2036]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 04:14:29 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 04:14:29 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 04:14:29 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 04:14:29 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 04:14:29 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:29 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 04:14:29 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:14:30 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:30 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:30 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:30 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:14:30 IQ138000 wb-mqtt-knx[2020]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 04:14:31 IQ138000 python3[1983]: No data file found at /tmp/network_status_cache.json
Oct 11 04:14:31 IQ138000 python3[1983]: Connecting to MQTT
Oct 11 04:14:31 IQ138000 python3[1983]: Connected to MQTT
Oct 11 04:14:31 IQ138000 python3[1983]: Connection returned result: Connection Accepted.
Oct 11 04:14:31 IQ138000 NetworkManager[404]: <info>  [1760156071.8889] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:14:31 IQ138000 NetworkManager[404]: <info>  [1760156071.8891] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:14:33 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2054 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New virtual device lo 6af4dd4a-8b3c-4c71-9050-b4aa39230604 /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:14:33 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New active connection lo 6af4dd4a-8b3c-4c71-9050-b4aa39230604 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 04:14:34 IQ138000 wb-device-manager[1988]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 04:14:34 IQ138000 wb-device-manager[1988]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 04:14:34 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 04:14:34 IQ138000 kernel: dc5ldo: disabling
Oct 11 04:14:34 IQ138000 kernel: dldo4: disabling
Oct 11 04:14:34 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 04:14:34 IQ138000 kernel: vcc-sd: disabling
Oct 11 04:14:34 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:34 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:35 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 04:14:35 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:35 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:14:35 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: MQTT broker localhost:1883
Oct 11 04:14:35 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:14:35 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 04:14:35 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 11
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 11
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 11
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 04:14:35 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 04:14:36 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 1
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 1
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 1
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] ADC worker thread is started
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:14:36 IQ138000 wb-mqtt-adc[3089]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:14:36 IQ138000 knxd[3094]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:14:36 IQ138000 knxd[3094]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:14:36 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:14:36 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:36 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:14:36 IQ138000 wb-mqtt-confed[1997]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 04:14:37 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] DB initialization is done
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 04:14:38 IQ138000 wb-gsm[3324]: main: Called from pid 1 (systemd)
Oct 11 04:14:38 IQ138000 wb-usb-otg-start.sh[3377]: : wb-usb-otg-start
Oct 11 04:14:38 IQ138000 wb-usb-otg-start.sh[3377]: main: setup_device()
Oct 11 04:14:38 IQ138000 wb-gsm[3371]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:14:38 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 04:14:38 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 04:14:38 IQ138000 kernel: using random self ethernet address
Oct 11 04:14:38 IQ138000 kernel: using random host ethernet address
Oct 11 04:14:38 IQ138000 wb-usb-otg-start.sh[3377]: main: enabling profile rndis
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 04:14:38 IQ138000 wb-gsm[3440]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 04:14:38 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 04:14:38 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 04:14:38 IQ138000 systemd-udevd[3392]: Using default interface naming scheme 'v247'.
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 04:14:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 04:14:38 IQ138000 NetworkManager[404]: <info>  [1760156078.9357] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 04:14:38 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 04:14:39 IQ138000 NetworkManager[404]: <info>  [1760156079.0745] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 04:14:39 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 04:14:39 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 04:14:39 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 04:14:39 IQ138000 npm[1688]: > zigbee2mqtt@2.1.1 start
Oct 11 04:14:39 IQ138000 npm[1688]: > node index.js
Oct 11 04:14:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 04:14:40 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 04:14:40 IQ138000 wb-gsm[3602]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 04:14:40 IQ138000 NetworkManager[404]: <info>  [1760156080.6699] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:14:40 IQ138000 NetworkManager[404]: <info>  [1760156080.6701] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:14:40 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 04:14:40 IQ138000 wb-gsm[3613]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:14:41 IQ138000 wb-gsm[3636]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:14:41 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 04:14:41 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: DB logger started, go to main loop
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 04:14:41 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 04:14:41 IQ138000 python3[1983]: Выполнение: service wb-connection-manager stop
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 04:14:41 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 459)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:14:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 04:14:43 IQ138000 npm[3537]: Starting Zigbee2MQTT without watchdog.
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 04:14:43 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:44 IQ138000 wb-gsm[4001]: mm_off: Modem is already OFF
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 04:14:44 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:45 IQ138000 wb-gsm[4070]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:45 IQ138000 wb-gsm[4082]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:14:45 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:14:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:14:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 04:14:50 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:50 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:50 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:50 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:50 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:14:50 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:50 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:14:50 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:14:50 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: MQTT broker localhost:1883
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:14:50 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:14:50 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:14:50 IQ138000 knxd[4504]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:14:50 IQ138000 knxd[4504]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: w1 thread Started
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:14:50 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:14:50 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:14:50 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:14:50 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:14:50 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 04:14:50 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 04:14:50 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 04:14:50 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.200s CPU time.
Oct 11 04:14:50 IQ138000 python3[1983]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 04:14:50 IQ138000 python3[1983]:  
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <warn>  [1760156091.5292] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <info>  [1760156091.5295] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <info>  [1760156091.5313] manager: NetworkManager state is now DISCONNECTED
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <warn>  [1760156091.5329] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <info>  [1760156091.5341] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:14:51 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:14:51 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <info>  [1760156091.6038] manager: startup complete
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <info>  [1760156091.6051] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:14:51 IQ138000 NetworkManager[404]: <info>  [1760156091.6053] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:14:51 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 04:14:51 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 04:14:51 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 04:14:51 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:14:52 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:14:52 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:14:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:14:52 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:14:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:14:52 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:14:52 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 04:14:52 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 04:14:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:14:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:14:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:14:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:14:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:14:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:14:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:54 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:14:54 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 04:14:54 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:14:54 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 04:14:54 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 04:14:54 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:14:54 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:14:54 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:14:54 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:14:54 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:14:54 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:14:54 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 04:14:54 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 04:14:55 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:14:55 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 04:14:55 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:14:55 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 04:14:55 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:14:55 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:14:55 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 04:14:55 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:55 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 04:14:55 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 04:14:55 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 04:14:55 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 04:14:55 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 04:14:55 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 04:14:55 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 04:14:55 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 04:14:55 IQ138000 watchdog[4627]:  no test binary files
Oct 11 04:14:55 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 04:14:55 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 04:14:55 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 04:14:55 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 04:14:55 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 04:14:55 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 04:14:55 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 04:14:55 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:55 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 04:14:55 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:55 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 04:14:55 IQ138000 systemd[1]: Startup finished in 4.142s (kernel) + 50.624s (userspace) = 54.767s.
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:55 IQ138000 wb-rules[4608]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:14:55 IQ138000 wb-rules[4608]: INFO: driver is created
Oct 11 04:14:55 IQ138000 python3[1983]: Выполнение: mmcli -m wbc
Oct 11 04:14:55 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] rules-IQ138000-4608: MQTT connection established
Oct 11 04:14:55 IQ138000 wb-rules[4608]: INFO: driver loop is started
Oct 11 04:14:55 IQ138000 wb-rules[4608]: INFO: wait for driver to become ready
Oct 11 04:14:55 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:56 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:14:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:57 IQ138000 wb-rules[4608]: INFO: driver is ready
Oct 11 04:14:57 IQ138000 wb-rules[4608]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 04:14:57 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4608: MQTT connection established
Oct 11 04:14:57 IQ138000 wb-rules[4608]: INFO: [engine] Starting main loop
Oct 11 04:14:57 IQ138000 wb-rules[4608]: INFO: the engine is ready
Oct 11 04:14:57 IQ138000 wb-rules[4608]: INFO: [engine] Starting sync loop
Oct 11 04:14:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:14:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 04:14:58 IQ138000 wb-rules[4608]: WARNING: [rule warning] DAC: no config file
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 04:14:58 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 04:14:58 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 04:14:58 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 04:14:58 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 04:14:58 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 7a:6b:29:56:1b:69
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 04:14:58 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 04:14:58 IQ138000 NetworkManager[404]: <info>  [1760156098.9316] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 04:14:58 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 04:14:58 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 04:14:58 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:14:58 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 04:14:58 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 04:14:59 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 04:14:59 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 04:14:59 IQ138000 systemd-udevd[4882]: Using default interface naming scheme 'v247'.
Oct 11 04:14:59 IQ138000 systemd-udevd[4882]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:14:59 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:14:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:15:00 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 04:15:00 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:15:00 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:00 IQ138000 knxd[4995]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:15:00 IQ138000 knxd[4995]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:15:00 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:15:00 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:15:00 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:01 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 04:15:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:15:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:01 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 04:15:01 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 04:15:01 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:15:01 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:01 IQ138000 python3[1983]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 04:15:01 IQ138000 CRON[5015]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 04:15:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:01 IQ138000 CRON[5026]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 04:15:01 IQ138000 CRON[5015]: pam_unix(cron:session): session closed for user root
Oct 11 04:15:01 IQ138000 wb-gsm[5025]: mm_on: Waiting for modem to start
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:15:02 IQ138000 wb-rules[4608]: INFO: all rule files are loaded
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:15:02 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 04:15:03 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 npm[3537]: [2025-10-11 04:15:04] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 04:15:04 IQ138000 npm[3537]: [2025-10-11 04:15:04] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 04:15:04 IQ138000 npm[3537]: [2025-10-11 04:15:04] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 04:15:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 04:15:04 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:15:05 IQ138000 npm[3537]: [2025-10-11 04:15:05] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 04:15:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:05 IQ138000 npm[3537]: [2025-10-11 04:15:05] info:         zh:zstack:znp: Serialport opened
Oct 11 04:15:05 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 04:15:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:07 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:15:07 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:15:07 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:15:07 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:15:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:08 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:08 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: Currently 4 devices are joined.
Oct 11 04:15:08 IQ138000 npm[3537]: [2025-10-11 04:15:08] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 04:15:08 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:08 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m: Connected to MQTT server
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 07:15:09.020+00:00
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T07:15:09.020Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156289046,"cmd_timestamp_ms":1760156109046,"source":"schedule"}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156289046,"cmd_timestamp_ms":1760156109046,"source":"schedule"}
Oct 11 04:15:09 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:09 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:15:09 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:15:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:09 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:15:09 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:15:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m: Started frontend on port 8282
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 07:15:09.522+00:00
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T07:15:09.522Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156289559,"cmd_timestamp_ms":1760156109559,"source":"schedule"}
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156289559,"cmd_timestamp_ms":1760156109559,"source":"schedule"}
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 04:15:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 04:15:09 IQ138000 npm[3537]: [2025-10-11 04:15:09] info:         z2m: Zigbee2MQTT started!
Oct 11 04:15:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 07:15:09.800+00:00
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T07:15:09.800Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156289816,"cmd_timestamp_ms":1760156109816,"source":"schedule"}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156289816,"cmd_timestamp_ms":1760156109816,"source":"schedule"}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:15:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 07:15:09.833+00:00
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T07:15:09.833Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156289868,"cmd_timestamp_ms":1760156109868,"source":"schedule"}
Oct 11 04:15:09 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156289868,"cmd_timestamp_ms":1760156109868,"source":"schedule"}
Oct 11 04:15:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 07:15:10.003+00:00
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T07:15:10.003Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290015,"cmd_timestamp_ms":1760156110015,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290015,"cmd_timestamp_ms":1760156110015,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 07:15:10.244+00:00
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T07:15:10.244Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290262,"cmd_timestamp_ms":1760156110262,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290262,"cmd_timestamp_ms":1760156110262,"source":"schedule"}
Oct 11 04:15:10 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 07:15:10.432+00:00
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T07:15:10.432Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290480,"cmd_timestamp_ms":1760156110480,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290480,"cmd_timestamp_ms":1760156110480,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 04:15:10 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:15:10 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 07:15:10.677+00:00
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T07:15:10.677Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290691,"cmd_timestamp_ms":1760156110691,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156290691,"cmd_timestamp_ms":1760156110691,"source":"schedule"}
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 knxd[5193]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:15:10 IQ138000 knxd[5193]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:15:10 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:10 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:15:10 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 04:15:10 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 04:15:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 07:15:11.075+00:00
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T07:15:11.075Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156291087,"cmd_timestamp_ms":1760156111087,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156291087,"cmd_timestamp_ms":1760156111087,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 07:15:11.278+00:00
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 04:15:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T07:15:11.278Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156291296,"cmd_timestamp_ms":1760156111296,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156291296,"cmd_timestamp_ms":1760156111296,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:11 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 07:15:11.421+00:00
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T07:15:11.421Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156291439,"cmd_timestamp_ms":1760156111439,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156291439,"cmd_timestamp_ms":1760156111439,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 07:15:11.562+00:00
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T07:15:11.562Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760156291573,"cmd_timestamp_ms":1760156111573,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760156291573,"cmd_timestamp_ms":1760156111573,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 07:15:11.796+00:00
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T07:15:11.796Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760156291805,"cmd_timestamp_ms":1760156111805,"source":"schedule"}
Oct 11 04:15:11 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760156291805,"cmd_timestamp_ms":1760156111805,"source":"schedule"}
Oct 11 04:15:12 IQ138000 wb-watchdog[5248]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 07:15:12.047+00:00
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T07:15:12.047Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156292057,"cmd_timestamp_ms":1760156112057,"source":"schedule"}
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156292057,"cmd_timestamp_ms":1760156112057,"source":"schedule"}
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 07:15:12.191+00:00
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T07:15:12.191Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156292200,"cmd_timestamp_ms":1760156112200,"source":"schedule"}
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156292200,"cmd_timestamp_ms":1760156112200,"source":"schedule"}
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 04:15:12 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 04:15:12 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 04:15:13 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:15:13 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 04:15:13 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 04:15:13 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:15:13 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:15:13 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 04:15:13 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 04:15:13 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:13 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:15:13 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 04:15:13 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:15:13 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 04:15:14 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:14 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:15 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:15 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:15 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:16 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:16 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:17 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:17 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:18 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:18 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:19 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:19 IQ138000 ModemManager[479]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 04:15:19 IQ138000 ModemManager[479]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 04:15:19 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:19 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:20 IQ138000 ModemManager[479]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 04:15:20 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:15:20 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 04:15:20 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:15:20 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:15:20 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:15:20 IQ138000 python3[1983]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:15:20 IQ138000 knxd[5392]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:15:20 IQ138000 knxd[5392]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:15:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:15:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:15:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:15:20 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:15:21 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:15:21 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:15:21 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:15:21 IQ138000 ModemManager[479]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7214] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7264] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7298] device (ttyUSB1): modem state 'enabling'
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7324] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7346] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7415] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7434] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:21 IQ138000 NetworkManager[404]: <info>  [1760156121.7465] manager: NetworkManager state is now CONNECTING
Oct 11 04:15:21 IQ138000 ModemManager[479]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 04:15:21 IQ138000 wb-mqtt-nm-helper[2054]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 04:15:21 IQ138000 ModemManager[479]: <info>  [modem0] power state updated: on
Oct 11 04:15:22 IQ138000 python3[1983]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:15:22 IQ138000 python3[1983]:    --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:15:22 IQ138000 python3[1983]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:15:22 IQ138000 python3[1983]:            |                model: A7602E-H
Oct 11 04:15:22 IQ138000 python3[1983]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:15:22 IQ138000 python3[1983]:            |            supported: gsm-umts
Oct 11 04:15:22 IQ138000 python3[1983]:            |              current: gsm-umts
Oct 11 04:15:22 IQ138000 python3[1983]:            |         equipment id: 860803062234204
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   System   |               device: wbc
Oct 11 04:15:22 IQ138000 python3[1983]:            |              drivers: option, rndis_host
Oct 11 04:15:22 IQ138000 python3[1983]:            |               plugin: simtech
Oct 11 04:15:22 IQ138000 python3[1983]:            |         primary port: ttyUSB1
Oct 11 04:15:22 IQ138000 python3[1983]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:15:22 IQ138000 python3[1983]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:15:22 IQ138000 python3[1983]:            |                state: enabling
Oct 11 04:15:22 IQ138000 python3[1983]:            |          power state: on
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:15:22 IQ138000 python3[1983]:            |              current: allowed: any; preferred: none
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   3GPP     |                 imei: 860803062234204
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:15:22 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:22 IQ138000 python3[1983]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:22 IQ138000 python3[1983]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:15:22 IQ138000 python3[1983]:            |                       slot 2: none
Oct 11 04:15:22 IQ138000 python3[1983]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 04:15:22 IQ138000 python3[1983]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 04:15:22 IQ138000 python3[1983]:  successfully requested primary SIM switch in modem
Oct 11 04:15:24 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:15:24 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:15:24 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 04:15:24 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:15:24 IQ138000 lsyncd[5429]: 04:15:24 Normal: --- Startup ---
Oct 11 04:15:24 IQ138000 lsyncd[5429]: 04:15:24 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:15:24 IQ138000 lsyncd[5429]: journal
Oct 11 04:15:24 IQ138000 lsyncd[5429]: iq_network_manager/iq_network_manager.log
Oct 11 04:15:24 IQ138000 lsyncd[5429]: messages
Oct 11 04:15:24 IQ138000 lsyncd[5437]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:15:24 IQ138000 lsyncd[5436]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:15:24 IQ138000 lsyncd[5436]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:15:24 IQ138000 lsyncd[5429]: 04:15:24 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:15:24 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:15:24 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:15:24 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:15:25 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:25 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:15:26 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 04:15:26 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] simple connect started...
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (6/10): register
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 04:15:26 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:15:26 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 04:15:26 IQ138000 NetworkManager[404]: <info>  [1760156126.5225] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:26 IQ138000 NetworkManager[404]: <info>  [1760156126.5261] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 04:15:26 IQ138000 NetworkManager[404]: <info>  [1760156126.5308] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 04:15:26 IQ138000 NetworkManager[404]: <info>  [1760156126.5336] ppp-manager: starting PPP connection
Oct 11 04:15:26 IQ138000 NetworkManager[404]: <info>  [1760156126.5480] ppp-manager: pppd started with pid 5455
Oct 11 04:15:26 IQ138000 pppd[5455]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:15:26 IQ138000 NetworkManager[5455]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: initializing
Oct 11 04:15:26 IQ138000 pppd[5455]: pppd 2.4.9 started by root, uid 0
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 04:15:26 IQ138000 pppd[5455]: Using interface ppp0
Oct 11 04:15:26 IQ138000 NetworkManager[5455]: Using interface ppp0
Oct 11 04:15:26 IQ138000 NetworkManager[5455]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 04:15:26 IQ138000 pppd[5455]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 04:15:26 IQ138000 NetworkManager[404]: <info>  [1760156126.6190] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 04:15:26 IQ138000 pppd[5455]: PAP authentication succeeded
Oct 11 04:15:26 IQ138000 pppd[5455]: kernel does not support PPP filtering
Oct 11 04:15:26 IQ138000 pppd[5455]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 04:15:26 IQ138000 NetworkManager[5455]: PAP authentication succeeded
Oct 11 04:15:26 IQ138000 NetworkManager[5455]: kernel does not support PPP filtering
Oct 11 04:15:26 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 04:15:26 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 04:15:26 IQ138000 ModemManager[479]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 04:15:26 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:27 IQ138000 pppd[5455]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:15:27 IQ138000 NetworkManager[5455]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:15:27 IQ138000 pppd[5455]: local  IP address 10.129.237.30
Oct 11 04:15:27 IQ138000 NetworkManager[5455]: local  IP address 10.129.237.30
Oct 11 04:15:27 IQ138000 NetworkManager[5455]: remote IP address 10.64.64.64
Oct 11 04:15:27 IQ138000 NetworkManager[5455]: primary   DNS address 172.23.10.131
Oct 11 04:15:27 IQ138000 NetworkManager[5455]: secondary DNS address 172.23.10.130
Oct 11 04:15:27 IQ138000 pppd[5455]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 04:15:27 IQ138000 pppd[5455]: remote IP address 10.64.64.64
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.1905] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:15:27 IQ138000 pppd[5455]: primary   DNS address 172.23.10.131
Oct 11 04:15:27 IQ138000 pppd[5455]: secondary DNS address 172.23.10.130
Oct 11 04:15:27 IQ138000 pppd[5455]: nm-ppp-plugin: ip-up event
Oct 11 04:15:27 IQ138000 pppd[5455]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.2023] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.2035] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.2068] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.2137] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 04:15:27 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:15:27 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.2582] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:27 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:15:27 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:15:27 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:15:27 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.3568] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.3580] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.3600] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.3620] device (ttyUSB1): Activation: successful, device activated.
Oct 11 04:15:27 IQ138000 NetworkManager[404]: <info>  [1760156127.3652] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 04:15:27 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:27 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:27 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:15:28 IQ138000 ntpd[1655]: Listen normally on 4 ppp0 10.129.237.30:123
Oct 11 04:15:28 IQ138000 ntpd[1655]: new interface(s) found: waking up resolver
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:15:29 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:29 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:29 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:30 IQ138000 vnstatd[1656]: Info: Interface "ppp0" enabled.
Oct 11 04:15:31 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:15:31 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:15:31 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:15:31 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:15:31 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 04:15:31 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:15:31 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:15:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:15:31 IQ138000 wb-mqtt-knx[2020]: INFO: knxd connected successfully
Oct 11 04:15:31 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:32 IQ138000 python3[1983]: Выполнение: mmcli -i any
Oct 11 04:15:32 IQ138000 python3[1983]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 04:15:32 IQ138000 python3[1983]:    -------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:32 IQ138000 python3[1983]:   -------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Properties |            active: yes
Oct 11 04:15:32 IQ138000 python3[1983]:              |              imsi: 250997340491874
Oct 11 04:15:32 IQ138000 python3[1983]:              |             iccid: 8970199210429593744
Oct 11 04:15:32 IQ138000 python3[1983]:              |       operator id: 25099
Oct 11 04:15:32 IQ138000 python3[1983]:              |     operator name: Beeline
Oct 11 04:15:32 IQ138000 python3[1983]: Выполнение: mmcli -m wbc
Oct 11 04:15:32 IQ138000 python3[1983]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:15:32 IQ138000 python3[1983]:    --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:15:32 IQ138000 python3[1983]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:15:32 IQ138000 python3[1983]:            |                model: A7602E-H
Oct 11 04:15:32 IQ138000 python3[1983]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:15:32 IQ138000 python3[1983]:            |            supported: gsm-umts
Oct 11 04:15:32 IQ138000 python3[1983]:            |              current: gsm-umts
Oct 11 04:15:32 IQ138000 python3[1983]:            |         equipment id: 860803062234204
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   System   |               device: wbc
Oct 11 04:15:32 IQ138000 python3[1983]:            |              drivers: option, rndis_host
Oct 11 04:15:32 IQ138000 python3[1983]:            |               plugin: simtech
Oct 11 04:15:32 IQ138000 python3[1983]:            |         primary port: ttyUSB1
Oct 11 04:15:32 IQ138000 python3[1983]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:15:32 IQ138000 python3[1983]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:15:32 IQ138000 python3[1983]:            |                state: connected
Oct 11 04:15:32 IQ138000 python3[1983]:            |          power state: on
Oct 11 04:15:32 IQ138000 python3[1983]:            |          access tech: lte
Oct 11 04:15:32 IQ138000 python3[1983]:            |       signal quality: 93% (recent)
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:15:32 IQ138000 python3[1983]:            |              current: allowed: any; preferred: none
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   3GPP     |                 imei: 860803062234204
Oct 11 04:15:32 IQ138000 python3[1983]:            |          operator id: 25099
Oct 11 04:15:32 IQ138000 python3[1983]:            |        operator name: beeline
Oct 11 04:15:32 IQ138000 python3[1983]:            |         registration: home
Oct 11 04:15:32 IQ138000 python3[1983]:            | packet service state: attached
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:32 IQ138000 python3[1983]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:15:32 IQ138000 python3[1983]:            |                       slot 2: none
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:15:32 IQ138000 python3[1983]: Current state: home
Oct 11 04:15:32 IQ138000 python3[1983]: SIM registered in the network.
Oct 11 04:15:32 IQ138000 python3[1983]: Выполнение: mmcli -m wbc
Oct 11 04:15:32 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:15:32 IQ138000 python3[1983]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:15:32 IQ138000 python3[1983]:    --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:15:32 IQ138000 python3[1983]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:15:32 IQ138000 python3[1983]:            |                model: A7602E-H
Oct 11 04:15:32 IQ138000 python3[1983]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:15:32 IQ138000 python3[1983]:            |            supported: gsm-umts
Oct 11 04:15:32 IQ138000 python3[1983]:            |              current: gsm-umts
Oct 11 04:15:32 IQ138000 python3[1983]:            |         equipment id: 860803062234204
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   System   |               device: wbc
Oct 11 04:15:32 IQ138000 python3[1983]:            |              drivers: option, rndis_host
Oct 11 04:15:32 IQ138000 python3[1983]:            |               plugin: simtech
Oct 11 04:15:32 IQ138000 python3[1983]:            |         primary port: ttyUSB1
Oct 11 04:15:32 IQ138000 python3[1983]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:15:32 IQ138000 python3[1983]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:15:32 IQ138000 python3[1983]:            |                state: connected
Oct 11 04:15:32 IQ138000 python3[1983]:            |          power state: on
Oct 11 04:15:32 IQ138000 python3[1983]:            |          access tech: lte
Oct 11 04:15:32 IQ138000 python3[1983]:            |       signal quality: 93% (recent)
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:15:32 IQ138000 python3[1983]:            |              current: allowed: any; preferred: none
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   3GPP     |                 imei: 860803062234204
Oct 11 04:15:32 IQ138000 python3[1983]:            |          operator id: 25099
Oct 11 04:15:32 IQ138000 python3[1983]:            |        operator name: beeline
Oct 11 04:15:32 IQ138000 python3[1983]:            |         registration: home
Oct 11 04:15:32 IQ138000 python3[1983]:            | packet service state: attached
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:32 IQ138000 python3[1983]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:15:32 IQ138000 python3[1983]:            |                       slot 2: none
Oct 11 04:15:32 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:15:32 IQ138000 python3[1983]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:32 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:32 IQ138000 python3[1983]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:15:32 IQ138000 python3[1983]:    -------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:32 IQ138000 python3[1983]:   -------------------------------
Oct 11 04:15:32 IQ138000 python3[1983]:   Properties |            active: yes
Oct 11 04:15:32 IQ138000 python3[1983]:              |              imsi: 250997340491874
Oct 11 04:15:32 IQ138000 python3[1983]:              |             iccid: 8970199210429593744
Oct 11 04:15:32 IQ138000 python3[1983]:              |       operator id: 25099
Oct 11 04:15:32 IQ138000 python3[1983]:              |     operator name: Beeline
Oct 11 04:15:32 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:32 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:34 IQ138000 ntpd[1655]: Soliciting pool server 51.250.110.169
Oct 11 04:15:35 IQ138000 ntpd[1655]: Soliciting pool server 192.36.143.130
Oct 11 04:15:36 IQ138000 ntpd[1655]: Soliciting pool server 188.68.222.140
Oct 11 04:15:36 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:36 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 python3[1983]: Выполнение: mmcli -m wbc
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 python3[1983]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:15:37 IQ138000 python3[1983]:    --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:15:37 IQ138000 python3[1983]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:15:37 IQ138000 python3[1983]:            |                model: A7602E-H
Oct 11 04:15:37 IQ138000 python3[1983]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:15:37 IQ138000 python3[1983]:            |            supported: gsm-umts
Oct 11 04:15:37 IQ138000 python3[1983]:            |              current: gsm-umts
Oct 11 04:15:37 IQ138000 python3[1983]:            |         equipment id: 860803062234204
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   System   |               device: wbc
Oct 11 04:15:37 IQ138000 python3[1983]:            |              drivers: option, rndis_host
Oct 11 04:15:37 IQ138000 python3[1983]:            |               plugin: simtech
Oct 11 04:15:37 IQ138000 python3[1983]:            |         primary port: ttyUSB1
Oct 11 04:15:37 IQ138000 python3[1983]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:15:37 IQ138000 python3[1983]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:15:37 IQ138000 python3[1983]:            |                state: connected
Oct 11 04:15:37 IQ138000 python3[1983]:            |          power state: on
Oct 11 04:15:37 IQ138000 python3[1983]:            |          access tech: lte
Oct 11 04:15:37 IQ138000 python3[1983]:            |       signal quality: 93% (recent)
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:15:37 IQ138000 python3[1983]:            |              current: allowed: any; preferred: none
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   3GPP     |                 imei: 860803062234204
Oct 11 04:15:37 IQ138000 python3[1983]:            |          operator id: 25099
Oct 11 04:15:37 IQ138000 python3[1983]:            |        operator name: beeline
Oct 11 04:15:37 IQ138000 python3[1983]:            |         registration: home
Oct 11 04:15:37 IQ138000 python3[1983]:            | packet service state: attached
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:37 IQ138000 python3[1983]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:15:37 IQ138000 python3[1983]:            |                       slot 2: none
Oct 11 04:15:37 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:15:37 IQ138000 python3[1983]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 ntpd[1655]: Soliciting pool server 195.54.177.84
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:37 IQ138000 python3[1983]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:15:37 IQ138000 python3[1983]:    -------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:37 IQ138000 python3[1983]:   -------------------------------
Oct 11 04:15:37 IQ138000 python3[1983]:   Properties |            active: yes
Oct 11 04:15:37 IQ138000 python3[1983]:              |              imsi: 250997340491874
Oct 11 04:15:37 IQ138000 python3[1983]:              |             iccid: 8970199210429593744
Oct 11 04:15:37 IQ138000 python3[1983]:              |       operator id: 25099
Oct 11 04:15:37 IQ138000 python3[1983]:              |     operator name: Beeline
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:37 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:15:38 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:15:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:15:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:39 IQ138000 ntpd[1655]: Soliciting pool server 91.206.16.3
Oct 11 04:15:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:15:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:15:40 IQ138000 ntpd[1655]: Soliciting pool server 193.106.93.116
Oct 11 04:15:41 IQ138000 ntpd[1655]: Soliciting pool server 185.211.244.47
Oct 11 04:15:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:15:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:15:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:15:42 IQ138000 ntpd[1655]: Soliciting pool server 151.0.2.54
Oct 11 04:15:42 IQ138000 python3[1983]: Выполнение: mmcli -m wbc
Oct 11 04:15:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:15:42 IQ138000 python3[1983]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:15:42 IQ138000 python3[1983]:    --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:15:42 IQ138000 python3[1983]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:15:42 IQ138000 python3[1983]:            |                model: A7602E-H
Oct 11 04:15:42 IQ138000 python3[1983]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:15:42 IQ138000 python3[1983]:            |            supported: gsm-umts
Oct 11 04:15:42 IQ138000 python3[1983]:            |              current: gsm-umts
Oct 11 04:15:42 IQ138000 python3[1983]:            |         equipment id: 860803062234204
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   System   |               device: wbc
Oct 11 04:15:42 IQ138000 python3[1983]:            |              drivers: option, rndis_host
Oct 11 04:15:42 IQ138000 python3[1983]:            |               plugin: simtech
Oct 11 04:15:42 IQ138000 python3[1983]:            |         primary port: ttyUSB1
Oct 11 04:15:42 IQ138000 python3[1983]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:15:42 IQ138000 python3[1983]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:15:42 IQ138000 python3[1983]:            |                state: connected
Oct 11 04:15:42 IQ138000 python3[1983]:            |          power state: on
Oct 11 04:15:42 IQ138000 python3[1983]:            |          access tech: lte
Oct 11 04:15:42 IQ138000 python3[1983]:            |       signal quality: 93% (recent)
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:15:42 IQ138000 python3[1983]:            |              current: allowed: any; preferred: none
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   3GPP     |                 imei: 860803062234204
Oct 11 04:15:42 IQ138000 python3[1983]:            |          operator id: 25099
Oct 11 04:15:42 IQ138000 python3[1983]:            |        operator name: beeline
Oct 11 04:15:42 IQ138000 python3[1983]:            |         registration: home
Oct 11 04:15:42 IQ138000 python3[1983]:            | packet service state: attached
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:42 IQ138000 python3[1983]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:15:42 IQ138000 python3[1983]:            |                       slot 2: none
Oct 11 04:15:42 IQ138000 python3[1983]:   --------------------------------
Oct 11 04:15:42 IQ138000 python3[1983]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:15:42 IQ138000 python3[1983]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:43 IQ138000 python3[1983]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:15:43 IQ138000 python3[1983]:    -------------------------------
Oct 11 04:15:43 IQ138000 python3[1983]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:15:43 IQ138000 python3[1983]:   -------------------------------
Oct 11 04:15:43 IQ138000 python3[1983]:   Properties |            active: yes
Oct 11 04:15:43 IQ138000 python3[1983]:              |              imsi: 250997340491874
Oct 11 04:15:43 IQ138000 python3[1983]:              |             iccid: 8970199210429593744
Oct 11 04:15:43 IQ138000 python3[1983]:              |       operator id: 25099
Oct 11 04:15:43 IQ138000 python3[1983]:              |     operator name: Beeline
Oct 11 04:15:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:15:44 IQ138000 ntpd[1655]: Soliciting pool server 82.146.53.58
Oct 11 04:15:45 IQ138000 ntpd[1655]: Soliciting pool server 91.235.144.128
-- Boot c3644275357d488a8f3d59fd5eeeb764 --
Oct 11 04:19:40 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 04:19:40 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 04:19:40 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 04:19:40 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 04:19:40 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 04:19:40 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 04:19:40 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 04:19:40 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 04:19:40 IQ138000 kernel: Zone ranges:
Oct 11 04:19:40 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 04:19:40 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 04:19:40 IQ138000 kernel: Movable zone start for each node
Oct 11 04:19:40 IQ138000 kernel: Early memory node ranges
Oct 11 04:19:40 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:19:40 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:19:40 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 04:19:40 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 04:19:40 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 04:19:40 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 04:19:40 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 04:19:40 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 04:19:40 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 04:19:40 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 04:19:40 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 04:19:40 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 04:19:40 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 04:19:40 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 04:19:40 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 04:19:40 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 04:19:40 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 04:19:40 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 04:19:40 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 04:19:40 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 04:19:40 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 04:19:40 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 04:19:40 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 04:19:40 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 04:19:40 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 04:19:40 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 04:19:40 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 04:19:40 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 04:19:40 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 04:19:40 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 04:19:40 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 04:19:40 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 04:19:40 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 04:19:40 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 04:19:40 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 04:19:40 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 04:19:40 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 04:19:40 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 04:19:40 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 04:19:40 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 04:19:40 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 04:19:40 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 04:19:40 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 04:19:40 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 04:19:40 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 04:19:40 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 04:19:40 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 04:19:40 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 04:19:40 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 04:19:40 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 04:19:40 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 04:19:40 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 04:19:40 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 04:19:40 IQ138000 kernel: devtmpfs: initialized
Oct 11 04:19:40 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 04:19:40 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 04:19:40 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 04:19:40 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 04:19:40 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 04:19:40 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 04:19:40 IQ138000 kernel: No ATAGs?
Oct 11 04:19:40 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 04:19:40 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 04:19:40 IQ138000 kernel: SCSI subsystem initialized
Oct 11 04:19:40 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 04:19:40 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 04:19:40 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 04:19:40 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 04:19:40 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 04:19:40 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 04:19:40 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 04:19:40 IQ138000 kernel: PTP clock support registered
Oct 11 04:19:40 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 04:19:40 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 04:19:40 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 04:19:40 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 04:19:40 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:19:40 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 04:19:40 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 04:19:40 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 04:19:40 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 04:19:40 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 04:19:40 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 04:19:40 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 04:19:40 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 04:19:40 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 04:19:40 IQ138000 kernel: Key type id_resolver registered
Oct 11 04:19:40 IQ138000 kernel: Key type id_legacy registered
Oct 11 04:19:40 IQ138000 kernel: Key type asymmetric registered
Oct 11 04:19:40 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 04:19:40 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 04:19:40 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 04:19:40 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 04:19:40 IQ138000 kernel: io scheduler kyber registered
Oct 11 04:19:40 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:19:40 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 04:19:40 IQ138000 kernel: brd: module loaded
Oct 11 04:19:40 IQ138000 kernel: loop: module loaded
Oct 11 04:19:40 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 04:19:40 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:19:40 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:19:40 IQ138000 kernel: CAN device driver interface
Oct 11 04:19:40 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 04:19:40 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 04:19:40 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 04:19:40 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 04:19:40 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 04:19:40 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 04:19:40 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 04:19:40 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 04:19:40 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 04:19:40 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 04:19:40 IQ138000 kernel: i2c /dev entries driver
Oct 11 04:19:40 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 04:19:40 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 04:19:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 04:19:40 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 04:19:40 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 04:19:40 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 04:19:40 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 04:19:40 IQ138000 kernel: Segment Routing with IPv6
Oct 11 04:19:40 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 04:19:40 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 04:19:40 IQ138000 kernel: can: controller area network core
Oct 11 04:19:40 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 04:19:40 IQ138000 kernel: can: raw protocol
Oct 11 04:19:40 IQ138000 kernel: can: broadcast manager protocol
Oct 11 04:19:40 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 04:19:40 IQ138000 kernel: can: SAE J1939
Oct 11 04:19:40 IQ138000 kernel: Key type dns_resolver registered
Oct 11 04:19:40 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 04:19:40 IQ138000 kernel: registered taskstats version 1
Oct 11 04:19:40 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 04:19:40 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 04:19:40 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 04:19:40 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:19:40 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 04:19:40 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 04:19:40 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 04:19:40 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 04:19:40 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T04:19:36 UTC (1760156376)
Oct 11 04:19:40 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 04:19:40 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:19:40 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 04:19:40 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 04:19:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 04:19:40 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 04:19:40 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 04:19:40 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 04:19:40 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 04:19:40 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 04:19:40 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 04:19:40 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 04:19:40 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 04:19:40 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 04:19:40 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: random: fast init done
Oct 11 04:19:40 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 04:19:40 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 04:19:40 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 04:19:40 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 04:19:40 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 04:19:40 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 04:19:40 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 04:19:40 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 04:19:40 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 04:19:40 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:19:40 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:19:40 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 04:19:40 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:19:40 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 04:19:40 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 04:19:40 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 04:19:40 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 04:19:40 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 04:19:40 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 04:19:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 04:19:40 IQ138000 kernel: libphy: stmmac: probed
Oct 11 04:19:40 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:19:40 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 04:19:40 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:19:40 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 04:19:40 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 04:19:40 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:19:40 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 04:19:40 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 04:19:40 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 04:19:40 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 04:19:40 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 04:19:40 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 04:19:40 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:19:40 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 04:19:40 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 04:19:40 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 04:19:40 IQ138000 kernel: of_cfs_init
Oct 11 04:19:40 IQ138000 kernel: of_cfs_init: OK
Oct 11 04:19:40 IQ138000 kernel: ALSA device list:
Oct 11 04:19:40 IQ138000 kernel:   No soundcards found.
Oct 11 04:19:40 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 04:19:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 04:19:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 04:19:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 04:19:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 04:19:40 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 04:19:40 IQ138000 kernel: devtmpfs: mounted
Oct 11 04:19:40 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 04:19:40 IQ138000 kernel: Run /sbin/init as init process
Oct 11 04:19:40 IQ138000 kernel:   with arguments:
Oct 11 04:19:40 IQ138000 kernel:     /sbin/init
Oct 11 04:19:40 IQ138000 kernel:   with environment:
Oct 11 04:19:40 IQ138000 kernel:     HOME=/
Oct 11 04:19:40 IQ138000 kernel:     TERM=linux
Oct 11 04:19:40 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 04:19:40 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 04:19:40 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 04:19:40 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 04:19:40 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 04:19:40 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:19:40 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 04:19:40 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:19:40 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 04:19:40 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:19:40 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 04:19:40 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 04:19:40 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 04:19:40 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 04:19:40 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 04:19:40 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:19:40 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 04:19:40 IQ138000 systemd[1]: Reached target Paths.
Oct 11 04:19:40 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 04:19:40 IQ138000 systemd[1]: Reached target Slices.
Oct 11 04:19:40 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 04:19:40 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 04:19:40 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 04:19:40 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 04:19:40 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 04:19:40 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 04:19:40 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 04:19:40 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:19:40 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 04:19:40 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 04:19:40 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 04:19:40 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 04:19:40 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 04:19:40 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:19:40 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 04:19:40 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 04:19:40 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 04:19:40 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 04:19:40 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 04:19:40 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 04:19:40 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 04:19:40 IQ138000 systemd-journald[137]: Journal started
Oct 11 04:19:40 IQ138000 systemd-journald[137]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 04:19:40 IQ138000 systemd-fsck[140]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 04:19:40 IQ138000 systemd[1]: Started Journal Service.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 04:19:40 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 04:19:40 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 04:19:40 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 04:19:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 04:19:40 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 04:19:40 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 04:19:40 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:19:40 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:19:41 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 04:19:41 IQ138000 systemd-random-seed[149]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 04:19:41 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 04:19:41 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 04:19:41 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 04:19:41 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 04:19:41 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 04:19:41 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 04:19:41 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 04:19:41 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 04:19:41 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 04:19:41 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 04:19:41 IQ138000 systemd-udevd[154]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 04:19:41 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 04:19:41 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 04:19:42 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 04:19:42 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 04:19:42 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 04:19:42 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 04:19:42 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 04:19:42 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 04:19:42 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 04:19:42 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 04:19:42 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 04:19:42 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 04:19:42 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 04:19:42 IQ138000 systemd-udevd[157]: eth1: Failed to query device driver: Device or resource busy
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 04:19:42 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 04:19:42 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 04:19:42 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 04:19:42 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 04:19:42 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 04:19:42 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 04:19:42 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 04:19:42 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 04:19:42 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 04:19:42 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 04:19:42 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 04:19:43 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 04:19:43 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 04:19:43 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 04:19:43 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 04:19:43 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 04:19:43 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 04:19:43 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 04:19:43 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:19:43 IQ138000 systemd[1]: Reached target Swap.
Oct 11 04:19:43 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 04:19:43 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 04:19:43 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 04:19:43 IQ138000 systemd-fsck[203]: data: recovering journal
Oct 11 04:19:43 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 04:19:43 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:19:43 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:19:43 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:19:43 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:19:43 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 04:19:43 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 04:19:43 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 04:19:43 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 04:19:43 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 04:19:43 IQ138000 systemd-udevd[162]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:19:43 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:19:43 IQ138000 systemd-fsck[203]: data: clean, 16446/328656 files, 365136/1313536 blocks
Oct 11 04:19:43 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 04:19:43 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 04:19:43 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 04:19:43 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 04:19:43 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 04:19:43 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 04:19:43 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 04:19:43 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 04:19:43 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 04:19:43 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 04:19:43 IQ138000 systemd-journald[137]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.749ms for 460 entries.
Oct 11 04:19:43 IQ138000 systemd-journald[137]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 472.4M, max 496.6M, 24.2M free.
Oct 11 04:19:43 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 04:19:44 IQ138000 wb-configs-early[219]: Checking symlinks to /mnt/data
Oct 11 04:19:44 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 04:19:44 IQ138000 kernel: random: crng init done
Oct 11 04:19:44 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 04:19:44 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 04:19:44 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 04:19:44 IQ138000 wb-configs-early[219]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 04:19:44 IQ138000 wb-configs-early[219]: Setting ownership www-data to /mnt/data/uploads
Oct 11 04:19:44 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 04:19:44 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 04:19:44 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 04:19:44 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 04:19:44 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 04:19:45 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 04:19:45 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 04:19:45 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 04:19:45 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 04:19:45 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 04:19:45 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 04:19:45 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 04:19:45 IQ138000 systemd[1]: Reached target Timers.
Oct 11 04:19:45 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 04:19:45 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 04:19:45 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 04:19:45 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 04:19:45 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 04:19:45 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 04:19:45 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 04:19:45 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 04:19:45 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:19:45 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 04:19:45 IQ138000 cron[296]: (CRON) INFO (pidfile fd = 3)
Oct 11 04:19:45 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 04:19:45 IQ138000 cron[296]: (CRON) INFO (Running @reboot jobs)
Oct 11 04:19:45 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 04:19:45 IQ138000 bluetoothd[293]: Bluetooth daemon 5.55
Oct 11 04:19:45 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 04:19:45 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 04:19:45 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:19:45 IQ138000 bluetoothd[293]: Starting SDP server
Oct 11 04:19:45 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 04:19:45 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 04:19:45 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 04:19:45 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 04:19:45 IQ138000 dbus-daemon[297]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=293 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 04:19:45 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 04:19:45 IQ138000 bluetoothd[293]: Bluetooth management interface 1.18 initialized
Oct 11 04:19:45 IQ138000 bluetoothd[293]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 04:19:45 IQ138000 bluetoothd[293]: sap-server: Operation not permitted (1)
Oct 11 04:19:45 IQ138000 config-manager[294]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:19:45 IQ138000 config-manager[294]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:19:45 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 04:19:45 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 04:19:45 IQ138000 migrate.sh[318]: Error: No such file or directory
Oct 11 04:19:45 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:19:45 IQ138000 migrate.sh[328]: Error: No such file or directory
Oct 11 04:19:45 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:19:45 IQ138000 migrate.sh[338]: Error: No such file or directory
Oct 11 04:19:45 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 04:19:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:19:46 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 04:19:46 IQ138000 reverse-ssh.sh[350]: Error: No such file or directory
Oct 11 04:19:46 IQ138000 systemd[1]: Started watch config files.
Oct 11 04:19:46 IQ138000 migrate.sh[352]: Error: No such file or directory
Oct 11 04:19:46 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 04:19:46 IQ138000 rules-preprocessor[335]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:19:46 IQ138000 rules-preprocessor[335]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:19:46 IQ138000 migrate.sh[358]: Error: No such file or directory
Oct 11 04:19:46 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 04:19:46 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 04:19:46 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 04:19:46 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 04:19:46 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Successfully dropped root privileges.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: avahi-daemon 0.8 starting up.
Oct 11 04:19:46 IQ138000 wb-watch-configs[380]: Watched dirs: /etc /etc/network
Oct 11 04:19:46 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Successfully called chroot().
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Successfully dropped remaining capabilities.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: No service file found in /etc/avahi/services.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: New relevant interface lo.IPv6 for mDNS.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: New relevant interface lo.IPv4 for mDNS.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Network interface enumeration completed.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Registering new address record for ::1 on lo.*.
Oct 11 04:19:46 IQ138000 avahi-daemon[371]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 04:19:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:19:46 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:19:46 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 04:19:46 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 04:19:46 IQ138000 systemd-logind[344]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 04:19:46 IQ138000 systemd-logind[344]: New seat seat0.
Oct 11 04:19:46 IQ138000 wpa_supplicant[383]: Successfully initialized wpa_supplicant
Oct 11 04:19:46 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 04:19:46 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 04:19:46 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:19:46 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 04:19:46 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 04:19:46 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 04:19:46 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:19:46 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:19:46 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:19:46 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:19:46 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 04:19:46 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 04:19:46 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:19:46 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:19:46 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 04:19:46 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 04:19:46 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 04:19:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:19:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:19:46 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 04:19:46 IQ138000 NetworkManager[403]: <info>  [1760156386.9314] NetworkManager (version 1.42.4) is starting... (boot:c3644275-357d-488a-8f3d-59fd5eeeb764)
Oct 11 04:19:46 IQ138000 NetworkManager[403]: <info>  [1760156386.9318] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 04:19:46 IQ138000 NetworkManager[403]: <info>  [1760156386.9440] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 04:19:46 IQ138000 NetworkManager[403]: <info>  [1760156386.9853] manager[0x6f6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 04:19:46 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 04:19:46 IQ138000 systemd[1]: Started User Login Management.
Oct 11 04:19:47 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 04:19:47 IQ138000 monit[317]: Starting daemon monitor: monit.
Oct 11 04:19:47 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 04:19:47 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 04:19:47 IQ138000 systemd[1]: Started Network Manager.
Oct 11 04:19:47 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 04:19:47 IQ138000 avahi-daemon[371]: Server startup complete. Host name is IQ138000.local. Local service cookie is 2855401146.
Oct 11 04:19:47 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 04:19:47 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 04:19:47 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 04:19:47 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 04:19:47 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 04:19:47 IQ138000 ModemManager[477]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 04:19:47 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 04:19:47 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7466] hostname: hostname: using hostnamed
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7469] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7505] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7601] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7630] manager[0x6f6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7633] manager[0x6f6900]: rfkill: WWAN hardware radio set enabled
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.7984] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8064] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8137] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8421] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8511] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8530] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 04:19:47 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8576] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8581] manager: Networking is enabled by state file
Oct 11 04:19:47 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8653] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8656] settings: Loaded settings plugin: keyfile (internal)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8657] ifupdown: management mode: unmanaged
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8659] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.8660] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 04:19:47 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.9608] dhcp: init: Using DHCP client 'internal'
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.9647] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 04:19:47 IQ138000 NetworkManager[403]: <info>  [1760156387.9885] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.0076] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.0215] device (lo): Activation: starting connection 'lo' (6cba0403-4248-417b-abc5-6e0fec703fd4)
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.0335] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.0448] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:19:48 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:19:48 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.4080] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.4110] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.4142] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.4174] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:19:48 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 04:19:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 04:19:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 04:19:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 04:19:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 04:19:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.6259] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.6309] device (wlan0): driver supports Access Point (AP) mode
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.6359] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 04:19:48 IQ138000 NetworkManager[403]: <info>  [1760156388.6472] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.4580] device (wlan1): driver supports Access Point (AP) mode
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.4618] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.4642] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5246] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5276] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5302] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5376] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5867] modem-manager: ModemManager available
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5870] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5882] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.5919] device (lo): Activation: successful, device activated.
Oct 11 04:19:49 IQ138000 wpa_supplicant[383]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:19:49 IQ138000 wpa_supplicant[383]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8431] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8438] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8461] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8481] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8513] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8555] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8687] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8692] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8735] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8772] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8857] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:19:49 IQ138000 NetworkManager[403]: <info>  [1760156389.8919] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:50 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 04:19:50 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 04:19:50 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 04:19:53 IQ138000 init.sh[1317]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 04:19:53 IQ138000 wpa_supplicant[383]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:19:53 IQ138000 init.sh[1332]: In file included from -:16:
Oct 11 04:19:53 IQ138000 init.sh[1332]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:53 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:19:53 IQ138000 init.sh[1317]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 04:19:53 IQ138000 init.sh[1317]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 04:19:53 IQ138000 init.sh[1392]: In file included from -:11:
Oct 11 04:19:53 IQ138000 init.sh[1392]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:53 IQ138000 init.sh[1317]: ...
Oct 11 04:19:53 IQ138000 init.sh[1407]: In file included from -:11:
Oct 11 04:19:53 IQ138000 init.sh[1407]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:54 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 04:19:54 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 04:19:54 IQ138000 init.sh[1317]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 04:19:54 IQ138000 init.sh[1427]: In file included from -:24:
Oct 11 04:19:54 IQ138000 init.sh[1427]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:54 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:19:54 IQ138000 init.sh[1317]: ...
Oct 11 04:19:54 IQ138000 init.sh[1442]: In file included from -:24:
Oct 11 04:19:54 IQ138000 init.sh[1442]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:55 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 04:19:55 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 04:19:55 IQ138000 init.sh[1317]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 04:19:55 IQ138000 init.sh[1465]: In file included from -:11:
Oct 11 04:19:55 IQ138000 init.sh[1465]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:55 IQ138000 init.sh[1317]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 04:19:55 IQ138000 init.sh[1488]: In file included from -:11:
Oct 11 04:19:55 IQ138000 init.sh[1488]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:19:55 IQ138000 init.sh[1317]: ...
Oct 11 04:19:55 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 04:19:55 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 04:19:55 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 04:19:55 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 04:19:55 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 04:19:56 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 04:19:56 IQ138000 systemd[1]: Reached target Network.
Oct 11 04:19:56 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 04:19:56 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 04:19:56 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:19:56 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:19:56 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 04:19:56 IQ138000 lsyncd[1618]: 04:19:56 Normal: --- Startup ---
Oct 11 04:19:56 IQ138000 lsyncd[1618]: 04:19:56 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:19:56 IQ138000 lsyncd[1618]: iq_network_manager/iq_network_manager.log
Oct 11 04:19:56 IQ138000 lsyncd[1618]: messages
Oct 11 04:19:56 IQ138000 lsyncd[1618]: journal
Oct 11 04:19:56 IQ138000 knxd[1612]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:19:56 IQ138000 knxd[1612]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:19:56 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 04:19:56 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:19:56 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 04:19:56 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 04:19:56 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 04:19:56 IQ138000 lsyncd[1632]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:19:56 IQ138000 lsyncd[1626]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:19:56 IQ138000 lsyncd[1626]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 04:19:56 IQ138000 lsyncd[1618]: 04:19:56 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:19:56 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 04:19:56 IQ138000 ntpd[1628]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 04:19:56 IQ138000 ntpd[1628]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 04:19:56 IQ138000 ntpd[1628]: ----------------------------------------------------
Oct 11 04:19:56 IQ138000 ntpd[1628]: ntp-4 is maintained by Network Time Foundation,
Oct 11 04:19:56 IQ138000 ntpd[1628]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 04:19:56 IQ138000 ntpd[1628]: corporation.  Support and training for ntp-4 are
Oct 11 04:19:56 IQ138000 ntpd[1628]: available at https://www.nwtime.org/support
Oct 11 04:19:56 IQ138000 ntpd[1628]: ----------------------------------------------------
Oct 11 04:19:56 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 04:19:56 IQ138000 wb-knxd-config.sh[1511]: No /dev/ttyKNX found, disabling level2
Oct 11 04:19:56 IQ138000 wb-knxd-config.sh[1511]: Restart knxd
Oct 11 04:19:56 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 04:19:56 IQ138000 ntpd[1655]: proto: precision = 1.042 usec (-20)
Oct 11 04:19:56 IQ138000 ntpd[1655]: basedate set to 2020-09-11
Oct 11 04:19:56 IQ138000 ntpd[1655]: gps base set to 2020-09-13 (week 2123)
Oct 11 04:19:56 IQ138000 ntpd[1655]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 04:19:56 IQ138000 ntpd[1655]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 04:19:56 IQ138000 ntpd[1655]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 04:19:56 IQ138000 ntpd[1655]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 04:19:56 IQ138000 ntpd[1655]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 04:19:56 IQ138000 ntpd[1655]: Listen normally on 3 lo [::1]:123
Oct 11 04:19:56 IQ138000 ntpd[1655]: Listening on routing socket on fd #20 for interface updates
Oct 11 04:19:56 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 04:19:57 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 04:19:57 IQ138000 persist_meter_data.sh[1657]: Error: No such file or directory
Oct 11 04:19:57 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:19:57 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:19:57 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 04:19:57 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:19:57 IQ138000 wb-mqtt-w1[1678]: MQTT broker localhost:1883
Oct 11 04:19:57 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:19:57 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:19:57 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:19:57 IQ138000 wb-mqtt-w1[1678]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 04:19:57 IQ138000 wb-mqtt-w1[1678]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 04:19:57 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 04:19:57 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 04:19:57 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:19:57 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 04:19:57 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 04:19:57 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:19:57 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:19:57 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:19:57 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:19:57 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 04:19:57 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:19:57 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 04:19:57 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 04:19:57 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:19:57 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 04:19:57 IQ138000 wb-connection-manager[1503]: Connection LegacyWiFi not found, skipping
Oct 11 04:19:57 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 04:19:57 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 04:19:57 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 04:19:57 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 04:19:57 IQ138000 wb-connection-manager[1503]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 04:19:57 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 04:19:57 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 04:19:57 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 04:19:57 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 04:19:57 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 04:19:57 IQ138000 vnstatd[1656]: Info: vnStat daemon 2.6 started. (pid:1656 uid:110 gid:117 64-bit)
Oct 11 04:19:57 IQ138000 vnstatd[1656]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 04:19:57 IQ138000 vnstatd[1656]: Info: Interface "ppp0" disabled.
Oct 11 04:19:57 IQ138000 ntpd[1655]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:19:57 IQ138000 wb-connection-manager[1503]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 04:19:57 IQ138000 sshd[1729]: Server listening on 0.0.0.0 port 22.
Oct 11 04:19:57 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:19:57 IQ138000 sshd[1729]: Server listening on :: port 22.
Oct 11 04:19:57 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 04:19:58 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 04:19:58 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 04:19:58 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:19:58 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:19:58 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 04:19:58 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 04:19:58 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 04:19:58 IQ138000 NetworkManager[403]: <error> [1760156398.4208] audit: failed to open auditd socket: Protocol not supported
Oct 11 04:19:58 IQ138000 NetworkManager[403]: <info>  [1760156398.4211] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1503 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:19:58 IQ138000 wb-connection-manager[1503]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 04:19:58 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 04:19:58 IQ138000 reverse-ssh.sh[1830]: Error: No such file or directory
Oct 11 04:19:58 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 04:19:58 IQ138000 wpa_supplicant[383]: wlan0: Reject scan trigger since one is already pending
Oct 11 04:19:58 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:19:58 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:19:58 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:19:58 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 04:19:58 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:19:58 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:19:58 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:19:58 IQ138000 ntpd[1655]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:19:58 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:19:58 IQ138000 wb-adjust-systime[1831]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Warning: Error resolving bridge address: Name or service not known.
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 04:19:59 IQ138000 mosquitto[1877]: 1760156398: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 04:19:59 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 04:19:59 IQ138000 wb-adjust-systime[1831]: Drift file is valid (was recently edited)
Oct 11 04:19:59 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 04:19:59 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 04:19:59 IQ138000 knxd[1891]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:19:59 IQ138000 knxd[1891]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.2728] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.2734] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1503 uid=0 result="success"
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.2741] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.2760] manager: NetworkManager state is now CONNECTING
Oct 11 04:19:59 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.2980] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.3259] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.3335] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.3523] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:59 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.3871] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.3980] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.4016] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.4153] Config: added 'scan_ssid' value '1'
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.4175] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.4186] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.4197] Config: added 'psk' value '<hidden>'
Oct 11 04:19:59 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 04:19:59 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 04:19:59 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 04:19:59 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 04:19:59 IQ138000 wb-mqtt-db[1951]: MQTT broker localhost:1883
Oct 11 04:19:59 IQ138000 wb-mqtt-db[1951]: Config file /etc/wb-mqtt-db.conf
Oct 11 04:19:59 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.7738] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:19:59 IQ138000 NetworkManager[403]: <info>  [1760156399.7741] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:19:59 IQ138000 wb-mqtt-logs[1966]: MQTT broker localhost:1883
Oct 11 04:19:59 IQ138000 wb-mqtt-logs[1966]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:19:59 IQ138000 wb-mqtt-logs[1966]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:19:59 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:19:59 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:19:59 IQ138000 systemd[1]: Started metrics sender.
Oct 11 04:19:59 IQ138000 ntpd[1655]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:19:59 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 04:20:00 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] Creating tables if necessary
Oct 11 04:20:00 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] Create indices if necessary
Oct 11 04:20:00 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] Analyzing data table
Oct 11 04:20:00 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 04:20:00 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:20:00 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:20:00 IQ138000 wb-mqtt-iec104[1958]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:20:00 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:20:00 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.550s CPU time.
Oct 11 04:20:00 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 04:20:00 IQ138000 ntpd[1655]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:20:00 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: INFO: [wbgo_mqtt] confed-IQ138000-1942: MQTT connection established
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: fatal error: concurrent map writes
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 1 [running]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: runtime.throw(0xa393d940, 0x15)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         runtime/panic.go:1116 +0x64 fp=0xd5bd5c sp=0xd5bd48 pc=0xa362cefc
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: runtime.mapassign_faststr(0xa39e69c8, 0xd82080, 0xd800e0, 0x1a, 0x519f50)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         runtime/map_faststr.go:211 +0x3f4 fp=0xd5bd8c sp=0xd5bd5c pc=0xa3608d9c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*PahoMQTTClient).publish(0xdaa040, 0xd800e0, 0x1a, 0xa3937186, 0x1, 0x101, 0xd800e0, 0xda0090)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:277 +0x1d0 fp=0xd5bdf4 sp=0xd5bd8c pc=0xa39250ac
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*PahoMQTTClient).Publish(0xdaa040, 0xd800e0, 0x1a, 0xa3937186, 0x1, 0x101)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:284 +0x38 fp=0xd5be18 sp=0xd5bdf4 pc=0xa3925260
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*mqttRPCServer).Start(0xdaa0c0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/rpc.go:315 +0x394 fp=0xd5bea4 sp=0xd5be18 pc=0xa3927a5c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: main.main()
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wb-mqtt-confed/main.go:146 +0x874 fp=0xd5bfb8 sp=0xd5bea4 pc=0x4e155c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: runtime.main()
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         runtime/proc.go:204 +0x208 fp=0xd5bfe4 sp=0xd5bfb8 pc=0x19cef8
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: runtime.goexit()
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         runtime/asm_arm.s:857 +0x4 fp=0xd5bfe4 sp=0xd5bfe4 pc=0x1d05c4
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 18 [syscall]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: syscall.Syscall6(0xfc, 0xb, 0xf0fd58, 0x7, 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         syscall/asm_linux_arm.s:45 +0x8
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: golang.org/x/sys/unix.EpollWait(0xb, 0xf0fd58, 0x7, 0x7, 0xffffffff, 0x0, 0x0, 0x0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         golang.org/x/sys@v0.0.0-20200323222414-85ca7c5b95cd/unix/zsyscall_linux_arm.go:265 +0x54
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: gopkg.in/fsnotify%2ev1.(*fdPoller).wait(0xd1ec60, 0x0, 0x0, 0x0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         gopkg.in/fsnotify.v1@v1.3.0/inotify_poller.go:86 +0x5c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: gopkg.in/fsnotify%2ev1.(*Watcher).readEvents(0xd12570)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         gopkg.in/fsnotify.v1@v1.3.0/inotify.go:192 +0x1b8
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by gopkg.in/fsnotify%2ev1.NewWatcher
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         gopkg.in/fsnotify.v1@v1.3.0/inotify.go:61 +0x1d8
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 19 [select]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*dirWatcher).startWatching.func1(0xeca0f0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/dirwatcher.go:150 +0xdc
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by github.com/wirenboard/wbgo-private.(*dirWatcher).startWatching
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/dirwatcher.go:148 +0x1bc
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 20 [chan receive]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wb-mqtt-confed/confed.RunRequestHandler.func1(0xd31f80)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wb-mqtt-confed/confed/restarter.go:22 +0x40
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by github.com/wirenboard/wb-mqtt-confed/confed.RunRequestHandler
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wb-mqtt-confed/confed/restarter.go:20 +0x2c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 34 [syscall]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: os/signal.signal_recv(0x0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         runtime/sigqueue.go:147 +0x130
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: os/signal.loop()
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         os/signal/signal_unix.go:23 +0x14
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by os/signal.Notify.func1.1
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         os/signal/signal.go:150 +0x34
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 47 [select]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.(*baseToken).WaitTimeout(0xd840f0, 0x540be400, 0x2, 0x0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/token.go:84 +0x9c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*PahoMQTTClient).processToken(0xdaa040, 0xa3a306d8, 0xd840f0)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:233 +0x34
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*PahoMQTTClient).Start.func1(0xdaa040)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:225 +0x38
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by github.com/wirenboard/wbgo-private.(*PahoMQTTClient).Start
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:216 +0xe4
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 36 [select]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.keepalive(0xdb4000, 0xa4783008, 0xd88160)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/ping.go:48 +0x204
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.(*client).startCommsWorkers
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/client.go:593 +0x860
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 37 [chan receive]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.(*router).matchAndDispatch.func2(0xdae380, 0xd84030, 0xdae3c0, 0xdb4000, 0xc32401, 0xda60a4, 0xdae3c0, 0xdae400, 0xdae440, 0xdae480)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/router.go:174 +0x38c
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.(*router).matchAndDispatch
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/router.go:173 +0x128
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: goroutine 38 [runnable]:
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*tokenBuffer).Push(0xd82040, 0xa3a306d8, 0xd84150)
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:44 +0x174
Oct 11 04:20:00 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*PahoMQTTClient).Publish(0xdaa040, 0xd80080, 0x1a, 0xa3937186, 0x1, 0x101)
Oct 11 04:20:00 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:284 +0x58
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/wirenboard/wbgo-private.(*PahoMQTTClient).onConnect(0xdaa040, 0xa3a31990, 0xdb4000)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/wirenboard/wbgo-private/mqtt.go:143 +0x3a8
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.(*client).startCommsWorkers
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/client.go:615 +0x728
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 39 [chan send]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.(*client).startCommsWorkers.func1(0xdb4000, 0xdae500, 0xdae4c0, 0xd88168)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/client.go:632 +0x304
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.(*client).startCommsWorkers
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/client.go:625 +0x504
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 40 [IO wait]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: internal/poll.runtime_pollWait(0xa47421c0, 0x72, 0x5fe3b0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         runtime/netpoll.go:222 +0x44
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: internal/poll.(*pollDesc).wait(0xdb2294, 0x72, 0x5fe300, 0x7cee4c, 0x0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         internal/poll/fd_poll_runtime.go:87 +0x30
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: internal/poll.(*pollDesc).waitRead(...)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         internal/poll/fd_poll_runtime.go:92
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: internal/poll.(*FD).Read(0xdb2280, 0x10fed4c, 0x1, 0x1, 0x0, 0x0, 0x0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         internal/poll/fd_unix.go:159 +0x188
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: net.(*netFD).Read(0xdb2280, 0x10fed4c, 0x1, 0x1, 0x1, 0x1, 0xb6d77750)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         net/fd_posix.go:55 +0x38
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: net.(*conn).Read(0xd88160, 0x10fed4c, 0x1, 0x1, 0x0, 0x0, 0x0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         net/net.go:182 +0x64
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: io.ReadAtLeast(0x5fd6f0, 0xd88160, 0x10fed4c, 0x1, 0x1, 0x1, 0xeced34, 0x0, 0x0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         io/io.go:314 +0x6c
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: io.ReadFull(...)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         io/io.go:333
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho.mqtt.golang/packets.ReadPacket(0x5fd6f0, 0xd88160, 0x2, 0x2, 0x0, 0x0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/packets/packets.go:131 +0x80
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.startIncoming.func1(0x5fd6f0, 0xd88160, 0xd88198, 0xd88190, 0xdae540)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:124 +0xfc
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.startIncoming
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:122 +0x144
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 41 [select]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.startIncomingComms.func1(0xd88180, 0xd88188, 0xdae580, 0xa3a31690, 0xdb4000)
Oct 11 04:20:00 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:175 +0x170
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.startIncomingComms
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:164 +0x19c
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 42 [runnable]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.startOutgoingComms.func1(0xd881a0, 0xd881a8, 0xd881b0, 0xdae600, 0xa3a31690, 0xdb4000, 0x603918, 0xd88160)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:277 +0x168
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.startOutgoingComms
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:264 +0x1d8
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 43 [chan receive]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.startComms.func1(0xdae580, 0xdae680, 0xdae5c0, 0xdae640, 0xda60b0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:407 +0x44
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.startComms
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:406 +0x214
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 44 [chan receive]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.startComms.func2(0xdae600, 0xdae680, 0xda60b0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:430 +0x6c
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.startComms
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:429 +0x248
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 45 [semacquire]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: sync.runtime_Semacquire(0xda60b8)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         runtime/sema.go:56 +0x34
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: sync.(*WaitGroup).Wait(0xda60b0)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         sync/waitgroup.go:130 +0x84
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.startComms.func3(0xda60b0, 0xdae680)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:438 +0x1c
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.startComms
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/net.go:437 +0x274
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: goroutine 46 [select]:
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: github.com/eclipse/paho%2emqtt%2egolang.(*client).startCommsWorkers.func2(0xd88170, 0xd88178, 0xdae380, 0xdb4000)
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/client.go:663 +0xc8
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]: created by github.com/eclipse/paho%2emqtt%2egolang.(*client).startCommsWorkers
Oct 11 04:20:01 IQ138000 wb-mqtt-confed[1942]:         github.com/eclipse/paho.mqtt.golang@v1.4.2/client.go:658 +0x628
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2007]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:20:01 IQ138000 wb-mqtt-logs[1966]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:01 IQ138000 wb-mqtt-logs[1966]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:01 IQ138000 wb-mqtt-logs[1966]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:01 IQ138000 wb-mqtt-logs[1966]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:20:01 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 04:20:01 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 04:20:01 IQ138000 wb-mqtt-mbgate[1975]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 04:20:01 IQ138000 systemd[1]: wb-mqtt-confed.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:20:01 IQ138000 systemd[1]: wb-mqtt-confed.service: Failed with result 'exit-code'.
Oct 11 04:20:01 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 04:20:01 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 04:20:01 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 04:20:01 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 04:20:01 IQ138000 wb-mqtt-iec104[2132]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:01 IQ138000 wb-mqtt-knx[2144]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:20:01 IQ138000 wb-mqtt-knx[2144]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:20:01 IQ138000 wb-mqtt-opcua[2154]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:20:01 IQ138000 wb-mqtt-gpio[1844]: INFO: [gpio driver] Started
Oct 11 04:20:02 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 04:20:02 IQ138000 systemd[1]: wb-mqtt-confed.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:02 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 04:20:02 IQ138000 systemd[1]: Stopped Wiren Board configuration editor backend.
Oct 11 04:20:02 IQ138000 wb-mqtt-opcua[2154]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 04:20:02 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 04:20:02 IQ138000 wb-mqtt-iec104[2132]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 04:20:02 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 04:20:02 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 04:20:02 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 04:20:02 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:02 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 04:20:02 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:20:03 IQ138000 wb-mqtt-confed[2265]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:20:03 IQ138000 wb-mqtt-confed[2265]: INFO: [wbgo_mqtt] confed-IQ138000-2265: MQTT connection established
Oct 11 04:20:04 IQ138000 wb-mqtt-knx[2144]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:04 IQ138000 wb-mqtt-knx[2144]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:04 IQ138000 wb-mqtt-knx[2144]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:04 IQ138000 wb-mqtt-knx[2144]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:20:04 IQ138000 wb-mqtt-knx[2144]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 04:20:04 IQ138000 NetworkManager[403]: <info>  [1760156404.6000] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:20:04 IQ138000 NetworkManager[403]: <info>  [1760156404.6003] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:20:04 IQ138000 python3[1923]: No data file found at /tmp/network_status_cache.json
Oct 11 04:20:04 IQ138000 python3[1923]: Connecting to MQTT
Oct 11 04:20:05 IQ138000 python3[1923]: Connected to MQTT
Oct 11 04:20:05 IQ138000 python3[1923]: Connection returned result: Connection Accepted.
Oct 11 04:20:06 IQ138000 wb-device-manager[1932]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 04:20:06 IQ138000 wb-device-manager[1932]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 04:20:06 IQ138000 dbus-daemon[297]: [system] Connection :1.17 (uid=0 pid=2001 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:20:06 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New virtual device lo 6cba0403-4248-417b-abc5-6e0fec703fd4 /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:20:07 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New active connection lo 6cba0403-4248-417b-abc5-6e0fec703fd4 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 04:20:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:20:07 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:20:08 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 04:20:08 IQ138000 kernel: dc5ldo: disabling
Oct 11 04:20:08 IQ138000 kernel: dldo4: disabling
Oct 11 04:20:08 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 04:20:08 IQ138000 kernel: vcc-sd: disabling
Oct 11 04:20:08 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:20:08 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:20:08 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:20:08 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 04:20:08 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: MQTT broker localhost:1883
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] ADC worker thread is started
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:20:08 IQ138000 wb-mqtt-adc[3098]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:20:09 IQ138000 wb-mqtt-confed[2265]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 04:20:10 IQ138000 wb-gsm[3340]: main: Called from pid 1 (systemd)
Oct 11 04:20:10 IQ138000 wb-gsm[3379]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 04:20:10 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 04:20:11 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:11 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:20:11 IQ138000 wb-usb-otg-start.sh[3437]: : wb-usb-otg-start
Oct 11 04:20:11 IQ138000 wb-usb-otg-start.sh[3437]: main: setup_device()
Oct 11 04:20:11 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:20:11 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 04:20:11 IQ138000 knxd[3448]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:20:11 IQ138000 knxd[3448]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:20:11 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:20:11 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:20:11 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:20:11 IQ138000 wb-mqtt-db[1951]: INFO: [sqlite] DB initialization is done
Oct 11 04:20:11 IQ138000 wb-gsm[3454]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:20:11 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 04:20:11 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 04:20:11 IQ138000 kernel: using random self ethernet address
Oct 11 04:20:11 IQ138000 kernel: using random host ethernet address
Oct 11 04:20:11 IQ138000 wb-usb-otg-start.sh[3437]: main: enabling profile rndis
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 04:20:11 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 04:20:11 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 04:20:11 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 04:20:11 IQ138000 NetworkManager[403]: <info>  [1760156411.5386] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 04:20:11 IQ138000 systemd-udevd[3425]: Using default interface naming scheme 'v247'.
Oct 11 04:20:11 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 04:20:11 IQ138000 NetworkManager[403]: <info>  [1760156411.7125] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:20:11 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 04:20:11 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 04:20:12 IQ138000 wb-gsm[3581]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: DB logger started, go to main loop
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 04:20:12 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:20:12 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 04:20:13 IQ138000 wb-gsm[3596]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1428)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1455)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1470)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1477)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1484)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1497)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1510)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1523)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1536)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1549)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1562)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 04:20:13 IQ138000 wb-gsm[3620]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 04:20:13 IQ138000 wb-mqtt-db[1951]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1936)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1943)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1950)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1963)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1976)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1989)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2002)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2015)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2028)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 04:20:13 IQ138000 NetworkManager[403]: <info>  [1760156413.5241] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:20:13 IQ138000 NetworkManager[403]: <info>  [1760156413.5244] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 04:20:13 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 04:20:13 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 04:20:14 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 04:20:14 IQ138000 npm[1685]: > zigbee2mqtt@2.1.1 start
Oct 11 04:20:14 IQ138000 npm[1685]: > node index.js
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 04:20:14 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 04:20:14 IQ138000 python3[1923]: Выполнение: service wb-connection-manager stop
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:20:15 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:16 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:17 IQ138000 wb-gsm[4005]: mm_off: Modem is already OFF
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:17 IQ138000 npm[3712]: Starting Zigbee2MQTT without watchdog.
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 04:20:17 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-gsm[4075]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-gsm[4086]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 04:20:18 IQ138000 wb-gsm[4109]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 04:20:22 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:22 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:22 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:20:22 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:22 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:22 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:20:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:20:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:20:22 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 04:20:22 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:20:22 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:20:22 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:20:22 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:20:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:22 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:20:22 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:20:23 IQ138000 knxd[4509]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:20:23 IQ138000 knxd[4509]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:20:23 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: MQTT broker localhost:1883
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:20:23 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: w1 thread Started
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:20:23 IQ138000 wb-mqtt-w1[4520]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:20:23 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:20:23 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:20:23 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 04:20:23 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:20:23 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:20:23 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 04:20:23 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 04:20:23 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 04:20:23 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.164s CPU time.
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 python3[1923]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 04:20:23 IQ138000 python3[1923]:  
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:20:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <warn>  [1760156424.5284] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <info>  [1760156424.5286] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <info>  [1760156424.5306] manager: NetworkManager state is now DISCONNECTED
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <warn>  [1760156424.5401] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <info>  [1760156424.5409] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <info>  [1760156424.5411] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <info>  [1760156424.5477] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:24 IQ138000 wpa_supplicant[383]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:20:24 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:20:24 IQ138000 NetworkManager[403]: <info>  [1760156424.5721] manager: startup complete
Oct 11 04:20:24 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 04:20:24 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 04:20:24 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 04:20:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:24 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 04:20:24 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:20:25 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 04:20:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:25 IQ138000 wpa_supplicant[383]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:20:25 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 04:20:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 4 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:20:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:20:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:20:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:20:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:20:27 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:27 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 04:20:27 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:20:27 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 04:20:27 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 04:20:27 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:20:27 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:20:27 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:20:27 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:20:27 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:20:27 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:20:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:20:27 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:20:27 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:20:27 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 04:20:27 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:20:28 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:20:28 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 04:20:28 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 04:20:28 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 04:20:28 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 04:20:28 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 04:20:28 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 04:20:28 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 04:20:28 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 04:20:28 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 04:20:28 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 04:20:28 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 04:20:28 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 04:20:28 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 04:20:28 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 04:20:28 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 04:20:28 IQ138000 watchdog[4627]:  no test binary files
Oct 11 04:20:28 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 04:20:28 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 04:20:28 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 04:20:28 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 04:20:28 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 04:20:28 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 04:20:28 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 04:20:28 IQ138000 python3[1923]: Выполнение: mmcli -m wbc
Oct 11 04:20:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:28 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 04:20:28 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 04:20:28 IQ138000 systemd[1]: Startup finished in 3.796s (kernel) + 49.920s (userspace) = 53.717s.
Oct 11 04:20:28 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:28 IQ138000 wb-rules[4620]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:20:28 IQ138000 wb-rules[4620]: INFO: driver is created
Oct 11 04:20:28 IQ138000 wb-rules[4620]: INFO: [wbgo_mqtt] rules-IQ138000-4620: MQTT connection established
Oct 11 04:20:28 IQ138000 wb-rules[4620]: INFO: driver loop is started
Oct 11 04:20:28 IQ138000 wb-rules[4620]: INFO: wait for driver to become ready
Oct 11 04:20:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:29 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:30 IQ138000 wb-rules[4620]: INFO: driver is ready
Oct 11 04:20:30 IQ138000 wb-rules[4620]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 04:20:30 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:30 IQ138000 wb-rules[4620]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4620: MQTT connection established
Oct 11 04:20:30 IQ138000 wb-rules[4620]: INFO: [engine] Starting main loop
Oct 11 04:20:30 IQ138000 wb-rules[4620]: INFO: the engine is ready
Oct 11 04:20:30 IQ138000 wb-rules[4620]: INFO: [engine] Starting sync loop
Oct 11 04:20:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:30 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 04:20:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:31 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 04:20:31 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 6e:e3:ba:39:d1:3a
Oct 11 04:20:31 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 04:20:31 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 04:20:31 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 04:20:31 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 04:20:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 04:20:31 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 NetworkManager[403]: <info>  [1760156431.3572] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 04:20:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 04:20:31 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 04:20:31 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 04:20:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 systemd-udevd[4792]: Using default interface naming scheme 'v247'.
Oct 11 04:20:31 IQ138000 systemd-udevd[4792]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:31 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:31 IQ138000 wb-rules[4620]: WARNING: [rule warning] DAC: no config file
Oct 11 04:20:31 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:32 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 04:20:33 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 knxd[5004]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:20:33 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:20:33 IQ138000 knxd[5004]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:20:33 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:20:33 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 13700 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:33 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:33 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 04:20:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:34 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:34 IQ138000 wb-gsm[5021]: mm_on: Waiting for modem to start
Oct 11 04:20:34 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 04:20:35 IQ138000 python3[1923]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 04:20:35 IQ138000 wb-rules[4620]: INFO: all rule files are loaded
Oct 11 04:20:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:35 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:20:37 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:20:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:20:37 IQ138000 npm[3712]: [2025-10-11 04:20:37] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 04:20:37 IQ138000 npm[3712]: [2025-10-11 04:20:37] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 04:20:37 IQ138000 npm[3712]: [2025-10-11 04:20:37] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 04:20:38 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 04:20:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 04:20:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:38 IQ138000 npm[3712]: [2025-10-11 04:20:38] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 04:20:38 IQ138000 npm[3712]: [2025-10-11 04:20:38] info:         zh:zstack:znp: Serialport opened
Oct 11 04:20:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:20:40 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:41 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: Currently 4 devices are joined.
Oct 11 04:20:41 IQ138000 npm[3712]: [2025-10-11 04:20:41] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 07:20:42.264+00:00
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T07:20:42.264Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156622283,"cmd_timestamp_ms":1760156442283,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156622283,"cmd_timestamp_ms":1760156442283,"source":"schedule"}
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m: Connected to MQTT server
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 04:20:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 07:20:42.519+00:00
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T07:20:42.519Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156622535,"cmd_timestamp_ms":1760156442535,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760156622535,"cmd_timestamp_ms":1760156442535,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 07:20:42.620+00:00
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T07:20:42.620Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156622663,"cmd_timestamp_ms":1760156442663,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156622663,"cmd_timestamp_ms":1760156442663,"source":"schedule"}
Oct 11 04:20:42 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:42 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:20:42 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:20:42 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:20:42 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 07:20:42.783+00:00
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T07:20:42.783Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156622804,"cmd_timestamp_ms":1760156442804,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156622804,"cmd_timestamp_ms":1760156442804,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m: Started frontend on port 8282
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 07:20:42.900+00:00
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T07:20:42.900Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156622918,"cmd_timestamp_ms":1760156442918,"source":"schedule"}
Oct 11 04:20:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156622918,"cmd_timestamp_ms":1760156442918,"source":"schedule"}
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 04:20:42 IQ138000 npm[3712]: [2025-10-11 04:20:42] info:         z2m: Zigbee2MQTT started!
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 07:20:43.161+00:00
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T07:20:43.161Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156623188,"cmd_timestamp_ms":1760156443188,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156623188,"cmd_timestamp_ms":1760156443188,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 07:20:43.216+00:00
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T07:20:43.216Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156623236,"cmd_timestamp_ms":1760156443236,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156623236,"cmd_timestamp_ms":1760156443236,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 04:20:43 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 04:20:43 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:20:43 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:20:43 IQ138000 knxd[5175]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:20:43 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:20:43 IQ138000 knxd[5175]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 07:20:43.430+00:00
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T07:20:43.430Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:20:43 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:20:43 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156623446,"cmd_timestamp_ms":1760156443446,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760156623446,"cmd_timestamp_ms":1760156443446,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 04:20:43 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 07:20:43.771+00:00
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T07:20:43.771Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156623791,"cmd_timestamp_ms":1760156443791,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156623791,"cmd_timestamp_ms":1760156443791,"source":"schedule"}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 04:20:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 04:20:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 07:20:43.982+00:00
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T07:20:43.982Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:43 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156623997,"cmd_timestamp_ms":1760156443997,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156623997,"cmd_timestamp_ms":1760156443997,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 07:20:44.281+00:00
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T07:20:44.281Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156624294,"cmd_timestamp_ms":1760156444294,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760156624294,"cmd_timestamp_ms":1760156444294,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 07:20:44.544+00:00
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T07:20:44.544Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760156624559,"cmd_timestamp_ms":1760156444559,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760156624559,"cmd_timestamp_ms":1760156444559,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 07:20:44.674+00:00
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T07:20:44.674Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760156624682,"cmd_timestamp_ms":1760156444682,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760156624682,"cmd_timestamp_ms":1760156444682,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 04:20:44 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 07:20:44.836+00:00
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T07:20:44.836Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156624847,"cmd_timestamp_ms":1760156444847,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156624847,"cmd_timestamp_ms":1760156444847,"source":"schedule"}
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 07:20:44.993+00:00
Oct 11 04:20:44 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T07:20:44.993Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156625003,"cmd_timestamp_ms":1760156445003,"source":"schedule"}
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760156625003,"cmd_timestamp_ms":1760156445003,"source":"schedule"}
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 04:20:45 IQ138000 wb-watchdog[5253]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 04:20:45 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 04:20:45 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:46 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 04:20:46 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 04:20:46 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:46 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 04:20:46 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:20:46 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 04:20:46 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:20:47 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:20:47 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:20:48 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:20:49 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:50 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:51 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:51 IQ138000 ModemManager[477]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 04:20:51 IQ138000 ModemManager[477]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 04:20:52 IQ138000 ModemManager[477]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 04:20:52 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:52 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:20:52 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:52 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:20:53 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:20:53 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:20:53 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:20:53 IQ138000 python3[1923]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:20:53 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:20:53 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:20:53 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 04:20:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:20:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:20:53 IQ138000 knxd[5385]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:20:53 IQ138000 knxd[5385]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:20:53 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:20:53 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:20:53 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:20:53 IQ138000 ModemManager[477]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7823] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7844] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7864] device (ttyUSB1): modem state 'enabling'
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7891] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7917] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7975] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.7985] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:53 IQ138000 NetworkManager[403]: <info>  [1760156453.8005] manager: NetworkManager state is now CONNECTING
Oct 11 04:20:53 IQ138000 ModemManager[477]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 04:20:53 IQ138000 wb-mqtt-nm-helper[2001]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 04:20:53 IQ138000 ModemManager[477]: <info>  [modem0] power state updated: on
Oct 11 04:20:54 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:20:54 IQ138000 python3[1923]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:20:54 IQ138000 python3[1923]:    --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:20:54 IQ138000 python3[1923]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:20:54 IQ138000 python3[1923]:            |                model: A7602E-H
Oct 11 04:20:54 IQ138000 python3[1923]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:20:54 IQ138000 python3[1923]:            |            supported: gsm-umts
Oct 11 04:20:54 IQ138000 python3[1923]:            |              current: gsm-umts
Oct 11 04:20:54 IQ138000 python3[1923]:            |         equipment id: 860803062234204
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   System   |               device: wbc
Oct 11 04:20:54 IQ138000 python3[1923]:            |              drivers: option, rndis_host
Oct 11 04:20:54 IQ138000 python3[1923]:            |               plugin: simtech
Oct 11 04:20:54 IQ138000 python3[1923]:            |         primary port: ttyUSB1
Oct 11 04:20:54 IQ138000 python3[1923]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:20:54 IQ138000 python3[1923]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:20:54 IQ138000 python3[1923]:            |                state: enabling
Oct 11 04:20:54 IQ138000 python3[1923]:            |          power state: on
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:20:54 IQ138000 python3[1923]:            |              current: allowed: any; preferred: none
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   3GPP     |                 imei: 860803062234204
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:20:54 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:20:54 IQ138000 python3[1923]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:20:54 IQ138000 python3[1923]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:20:54 IQ138000 python3[1923]:            |                       slot 2: none
Oct 11 04:20:54 IQ138000 python3[1923]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 04:20:54 IQ138000 python3[1923]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 04:20:54 IQ138000 python3[1923]:  successfully requested primary SIM switch in modem
Oct 11 04:20:54 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:20:57 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:20:57 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:20:57 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:20:57 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 04:20:57 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:20:57 IQ138000 lsyncd[5428]: 04:20:57 Normal: --- Startup ---
Oct 11 04:20:57 IQ138000 lsyncd[5428]: 04:20:57 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:20:57 IQ138000 lsyncd[5428]: iq_network_manager/iq_network_manager.log
Oct 11 04:20:57 IQ138000 lsyncd[5428]: journal
Oct 11 04:20:57 IQ138000 lsyncd[5428]: messages
Oct 11 04:20:57 IQ138000 lsyncd[5431]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:20:57 IQ138000 lsyncd[5430]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:20:57 IQ138000 lsyncd[5430]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:20:57 IQ138000 lsyncd[5428]: 04:20:57 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:20:57 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:20:57 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:20:57 IQ138000 ModemManager[477]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 04:20:57 IQ138000 ModemManager[477]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 04:20:57 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:20:57 IQ138000 ModemManager[477]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 04:20:57 IQ138000 ModemManager[477]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] simple connect started...
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (6/10): register
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 04:20:58 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 5 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 04:20:58 IQ138000 NetworkManager[403]: <info>  [1760156458.5883] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:58 IQ138000 NetworkManager[403]: <info>  [1760156458.5896] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 04:20:58 IQ138000 NetworkManager[403]: <info>  [1760156458.5929] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 04:20:58 IQ138000 NetworkManager[403]: <info>  [1760156458.5959] ppp-manager: starting PPP connection
Oct 11 04:20:58 IQ138000 NetworkManager[403]: <info>  [1760156458.6152] ppp-manager: pppd started with pid 5440
Oct 11 04:20:58 IQ138000 pppd[5440]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:20:58 IQ138000 NetworkManager[5440]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: initializing
Oct 11 04:20:58 IQ138000 pppd[5440]: pppd 2.4.9 started by root, uid 0
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 04:20:58 IQ138000 pppd[5440]: Using interface ppp0
Oct 11 04:20:58 IQ138000 NetworkManager[5440]: Using interface ppp0
Oct 11 04:20:58 IQ138000 NetworkManager[5440]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:20:58 IQ138000 pppd[5440]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 04:20:58 IQ138000 NetworkManager[403]: <info>  [1760156458.6918] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 04:20:58 IQ138000 pppd[5440]: PAP authentication succeeded
Oct 11 04:20:58 IQ138000 pppd[5440]: kernel does not support PPP filtering
Oct 11 04:20:58 IQ138000 pppd[5440]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 04:20:58 IQ138000 NetworkManager[5440]: PAP authentication succeeded
Oct 11 04:20:58 IQ138000 NetworkManager[5440]: kernel does not support PPP filtering
Oct 11 04:20:58 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 04:20:58 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 04:20:58 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:20:58 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:20:58 IQ138000 ModemManager[477]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 04:20:59 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:20:59 IQ138000 pppd[5440]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:20:59 IQ138000 NetworkManager[5440]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:20:59 IQ138000 pppd[5440]: local  IP address 10.225.109.225
Oct 11 04:20:59 IQ138000 pppd[5440]: remote IP address 10.64.64.64
Oct 11 04:20:59 IQ138000 pppd[5440]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 04:20:59 IQ138000 NetworkManager[5440]: local  IP address 10.225.109.225
Oct 11 04:20:59 IQ138000 NetworkManager[5440]: remote IP address 10.64.64.64
Oct 11 04:20:59 IQ138000 NetworkManager[5440]: primary   DNS address 172.23.10.131
Oct 11 04:20:59 IQ138000 NetworkManager[5440]: secondary DNS address 172.23.10.130
Oct 11 04:20:59 IQ138000 pppd[5440]: primary   DNS address 172.23.10.131
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.2444] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:20:59 IQ138000 pppd[5440]: secondary DNS address 172.23.10.130
Oct 11 04:20:59 IQ138000 pppd[5440]: nm-ppp-plugin: ip-up event
Oct 11 04:20:59 IQ138000 pppd[5440]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.2564] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.2593] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.2620] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.2710] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 04:20:59 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:20:59 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:20:59 IQ138000 dbus-daemon[297]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 04:20:59 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.3397] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:59 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:20:59 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:20:59 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:59 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:20:59 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.4335] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.4347] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.4368] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.4412] device (ttyUSB1): Activation: successful, device activated.
Oct 11 04:20:59 IQ138000 NetworkManager[403]: <info>  [1760156459.4493] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 04:20:59 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:59 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:20:59 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:21:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:21:00 IQ138000 vnstatd[1656]: Info: Interface "ppp0" enabled.
Oct 11 04:21:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:21:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:21:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:21:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:21:00 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:21:00 IQ138000 ntpd[1655]: Listen normally on 4 ppp0 10.225.109.225:123
Oct 11 04:21:00 IQ138000 ntpd[1655]: new interface(s) found: waking up resolver
Oct 11 04:21:01 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:21:01 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:21:02 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:21:03 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:21:03 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 04:21:03 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:21:03 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:21:03 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:21:03 IQ138000 wb-mqtt-knx[2144]: INFO: knxd connected successfully
Oct 11 04:21:04 IQ138000 python3[1923]: Выполнение: mmcli -i any
Oct 11 04:21:04 IQ138000 python3[1923]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 04:21:04 IQ138000 python3[1923]:    -------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:04 IQ138000 python3[1923]:   -------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Properties |            active: yes
Oct 11 04:21:04 IQ138000 python3[1923]:              |              imsi: 250997340491874
Oct 11 04:21:04 IQ138000 python3[1923]:              |             iccid: 8970199210429593744
Oct 11 04:21:04 IQ138000 python3[1923]:              |       operator id: 25099
Oct 11 04:21:04 IQ138000 python3[1923]:              |     operator name: Beeline
Oct 11 04:21:04 IQ138000 python3[1923]: Выполнение: mmcli -m wbc
Oct 11 04:21:04 IQ138000 python3[1923]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:21:04 IQ138000 python3[1923]:    --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:21:04 IQ138000 python3[1923]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:21:04 IQ138000 python3[1923]:            |                model: A7602E-H
Oct 11 04:21:04 IQ138000 python3[1923]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:21:04 IQ138000 python3[1923]:            |            supported: gsm-umts
Oct 11 04:21:04 IQ138000 python3[1923]:            |              current: gsm-umts
Oct 11 04:21:04 IQ138000 python3[1923]:            |         equipment id: 860803062234204
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   System   |               device: wbc
Oct 11 04:21:04 IQ138000 python3[1923]:            |              drivers: option, rndis_host
Oct 11 04:21:04 IQ138000 python3[1923]:            |               plugin: simtech
Oct 11 04:21:04 IQ138000 python3[1923]:            |         primary port: ttyUSB1
Oct 11 04:21:04 IQ138000 python3[1923]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:21:04 IQ138000 python3[1923]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:21:04 IQ138000 python3[1923]:            |                state: connected
Oct 11 04:21:04 IQ138000 python3[1923]:            |          power state: on
Oct 11 04:21:04 IQ138000 python3[1923]:            |          access tech: lte
Oct 11 04:21:04 IQ138000 python3[1923]:            |       signal quality: 93% (recent)
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:21:04 IQ138000 python3[1923]:            |              current: allowed: any; preferred: none
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   3GPP     |                 imei: 860803062234204
Oct 11 04:21:04 IQ138000 python3[1923]:            |          operator id: 25099
Oct 11 04:21:04 IQ138000 python3[1923]:            |        operator name: beeline
Oct 11 04:21:04 IQ138000 python3[1923]:            |         registration: home
Oct 11 04:21:04 IQ138000 python3[1923]:            | packet service state: attached
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:04 IQ138000 python3[1923]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:21:04 IQ138000 python3[1923]:            |                       slot 2: none
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:21:04 IQ138000 python3[1923]: Current state: home
Oct 11 04:21:04 IQ138000 python3[1923]: SIM registered in the network.
Oct 11 04:21:04 IQ138000 python3[1923]: Выполнение: mmcli -m wbc
Oct 11 04:21:04 IQ138000 python3[1923]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:21:04 IQ138000 python3[1923]:    --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:21:04 IQ138000 python3[1923]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:21:04 IQ138000 python3[1923]:            |                model: A7602E-H
Oct 11 04:21:04 IQ138000 python3[1923]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:21:04 IQ138000 python3[1923]:            |            supported: gsm-umts
Oct 11 04:21:04 IQ138000 python3[1923]:            |              current: gsm-umts
Oct 11 04:21:04 IQ138000 python3[1923]:            |         equipment id: 860803062234204
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   System   |               device: wbc
Oct 11 04:21:04 IQ138000 python3[1923]:            |              drivers: option, rndis_host
Oct 11 04:21:04 IQ138000 python3[1923]:            |               plugin: simtech
Oct 11 04:21:04 IQ138000 python3[1923]:            |         primary port: ttyUSB1
Oct 11 04:21:04 IQ138000 python3[1923]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:21:04 IQ138000 python3[1923]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:21:04 IQ138000 python3[1923]:            |                state: connected
Oct 11 04:21:04 IQ138000 python3[1923]:            |          power state: on
Oct 11 04:21:04 IQ138000 python3[1923]:            |          access tech: lte
Oct 11 04:21:04 IQ138000 python3[1923]:            |       signal quality: 93% (recent)
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:21:04 IQ138000 python3[1923]:            |              current: allowed: any; preferred: none
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   3GPP     |                 imei: 860803062234204
Oct 11 04:21:04 IQ138000 python3[1923]:            |          operator id: 25099
Oct 11 04:21:04 IQ138000 python3[1923]:            |        operator name: beeline
Oct 11 04:21:04 IQ138000 python3[1923]:            |         registration: home
Oct 11 04:21:04 IQ138000 python3[1923]:            | packet service state: attached
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:04 IQ138000 python3[1923]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:21:04 IQ138000 python3[1923]:            |                       slot 2: none
Oct 11 04:21:04 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:21:04 IQ138000 python3[1923]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:04 IQ138000 python3[1923]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:21:04 IQ138000 python3[1923]:    -------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:04 IQ138000 python3[1923]:   -------------------------------
Oct 11 04:21:04 IQ138000 python3[1923]:   Properties |            active: yes
Oct 11 04:21:04 IQ138000 python3[1923]:              |              imsi: 250997340491874
Oct 11 04:21:04 IQ138000 python3[1923]:              |             iccid: 8970199210429593744
Oct 11 04:21:04 IQ138000 python3[1923]:              |       operator id: 25099
Oct 11 04:21:04 IQ138000 python3[1923]:              |     operator name: Beeline
Oct 11 04:21:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:21:06 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:21:06 IQ138000 ntpd[1655]: Soliciting pool server 83.167.27.4
Oct 11 04:21:07 IQ138000 ntpd[1655]: Soliciting pool server 93.95.100.85
Oct 11 04:21:08 IQ138000 ntpd[1655]: Soliciting pool server 195.218.227.230
Oct 11 04:21:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:21:09 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:21:09 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:21:09 IQ138000 python3[1923]: Выполнение: mmcli -m wbc
Oct 11 04:21:09 IQ138000 ntpd[1655]: Soliciting pool server 194.87.95.73
Oct 11 04:21:09 IQ138000 python3[1923]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:21:09 IQ138000 python3[1923]:    --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:21:09 IQ138000 python3[1923]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:21:09 IQ138000 python3[1923]:            |                model: A7602E-H
Oct 11 04:21:09 IQ138000 python3[1923]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:21:09 IQ138000 python3[1923]:            |            supported: gsm-umts
Oct 11 04:21:09 IQ138000 python3[1923]:            |              current: gsm-umts
Oct 11 04:21:09 IQ138000 python3[1923]:            |         equipment id: 860803062234204
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   System   |               device: wbc
Oct 11 04:21:09 IQ138000 python3[1923]:            |              drivers: option, rndis_host
Oct 11 04:21:09 IQ138000 python3[1923]:            |               plugin: simtech
Oct 11 04:21:09 IQ138000 python3[1923]:            |         primary port: ttyUSB1
Oct 11 04:21:09 IQ138000 python3[1923]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:21:09 IQ138000 python3[1923]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:21:09 IQ138000 python3[1923]:            |                state: connected
Oct 11 04:21:09 IQ138000 python3[1923]:            |          power state: on
Oct 11 04:21:09 IQ138000 python3[1923]:            |          access tech: lte
Oct 11 04:21:09 IQ138000 python3[1923]:            |       signal quality: 93% (recent)
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:21:09 IQ138000 python3[1923]:            |              current: allowed: any; preferred: none
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   3GPP     |                 imei: 860803062234204
Oct 11 04:21:09 IQ138000 python3[1923]:            |          operator id: 25099
Oct 11 04:21:09 IQ138000 python3[1923]:            |        operator name: beeline
Oct 11 04:21:09 IQ138000 python3[1923]:            |         registration: home
Oct 11 04:21:09 IQ138000 python3[1923]:            | packet service state: attached
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:09 IQ138000 python3[1923]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:21:09 IQ138000 python3[1923]:            |                       slot 2: none
Oct 11 04:21:09 IQ138000 python3[1923]:   --------------------------------
Oct 11 04:21:09 IQ138000 python3[1923]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:21:09 IQ138000 python3[1923]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:21:09 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
-- Boot 664dda8c138f48718953dadc57e44a28 --
Oct 11 04:32:02 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 04:32:02 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 04:32:02 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 04:32:02 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 04:32:02 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 04:32:02 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 04:32:02 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 04:32:02 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 04:32:02 IQ138000 kernel: Zone ranges:
Oct 11 04:32:02 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 04:32:02 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 04:32:02 IQ138000 kernel: Movable zone start for each node
Oct 11 04:32:02 IQ138000 kernel: Early memory node ranges
Oct 11 04:32:02 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:32:02 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:32:02 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 04:32:02 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 04:32:02 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 04:32:02 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 04:32:02 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 04:32:02 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 04:32:02 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 04:32:02 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 04:32:02 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 04:32:02 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 04:32:02 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 04:32:02 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 04:32:02 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 04:32:02 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 04:32:02 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 04:32:02 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 04:32:02 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 04:32:02 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 04:32:02 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 04:32:02 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 04:32:02 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 04:32:02 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 04:32:02 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 04:32:02 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 04:32:02 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 04:32:02 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 04:32:02 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 04:32:02 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 04:32:02 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 04:32:02 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 04:32:02 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 04:32:02 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 04:32:02 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 04:32:02 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 04:32:02 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 04:32:02 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 04:32:02 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 04:32:02 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 04:32:02 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 04:32:02 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 04:32:02 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 04:32:02 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 04:32:02 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 04:32:02 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 04:32:02 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 04:32:02 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 04:32:02 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 04:32:02 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 04:32:02 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 04:32:02 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 04:32:02 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 04:32:02 IQ138000 kernel: devtmpfs: initialized
Oct 11 04:32:02 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 04:32:02 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 04:32:02 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 04:32:02 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 04:32:02 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 04:32:02 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 04:32:02 IQ138000 kernel: No ATAGs?
Oct 11 04:32:02 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 04:32:02 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 04:32:02 IQ138000 kernel: SCSI subsystem initialized
Oct 11 04:32:02 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 04:32:02 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 04:32:02 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 04:32:02 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 04:32:02 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 04:32:02 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 04:32:02 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 04:32:02 IQ138000 kernel: PTP clock support registered
Oct 11 04:32:02 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 04:32:02 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 04:32:02 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 04:32:02 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 04:32:02 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:32:02 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 04:32:02 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 04:32:02 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 04:32:02 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 04:32:02 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 04:32:02 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 04:32:02 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 04:32:02 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 04:32:02 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 04:32:02 IQ138000 kernel: Key type id_resolver registered
Oct 11 04:32:02 IQ138000 kernel: Key type id_legacy registered
Oct 11 04:32:02 IQ138000 kernel: Key type asymmetric registered
Oct 11 04:32:02 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 04:32:02 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 04:32:02 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 04:32:02 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 04:32:02 IQ138000 kernel: io scheduler kyber registered
Oct 11 04:32:02 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:32:02 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 04:32:02 IQ138000 kernel: brd: module loaded
Oct 11 04:32:02 IQ138000 kernel: loop: module loaded
Oct 11 04:32:02 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 04:32:02 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:32:02 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:32:02 IQ138000 kernel: CAN device driver interface
Oct 11 04:32:02 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 04:32:02 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 04:32:02 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 04:32:02 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 04:32:02 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 04:32:02 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 04:32:02 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 04:32:02 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 04:32:02 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 04:32:02 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 04:32:02 IQ138000 kernel: i2c /dev entries driver
Oct 11 04:32:02 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 04:32:02 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 04:32:02 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 04:32:02 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 04:32:02 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 04:32:02 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 04:32:02 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 04:32:02 IQ138000 kernel: Segment Routing with IPv6
Oct 11 04:32:02 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 04:32:02 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 04:32:02 IQ138000 kernel: can: controller area network core
Oct 11 04:32:02 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 04:32:02 IQ138000 kernel: can: raw protocol
Oct 11 04:32:02 IQ138000 kernel: can: broadcast manager protocol
Oct 11 04:32:02 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 04:32:02 IQ138000 kernel: can: SAE J1939
Oct 11 04:32:02 IQ138000 kernel: Key type dns_resolver registered
Oct 11 04:32:02 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 04:32:02 IQ138000 kernel: registered taskstats version 1
Oct 11 04:32:02 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 04:32:02 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 04:32:02 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 04:32:02 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:32:02 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 04:32:02 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 04:32:02 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 04:32:02 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 04:32:02 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T04:31:58 UTC (1760157118)
Oct 11 04:32:02 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 04:32:02 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:32:02 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 04:32:02 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 04:32:02 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 04:32:02 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 04:32:02 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 04:32:02 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 04:32:02 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 04:32:02 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 04:32:02 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 04:32:02 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 04:32:02 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 04:32:02 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 04:32:02 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: random: fast init done
Oct 11 04:32:02 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 04:32:02 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 04:32:02 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 04:32:02 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 04:32:02 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 04:32:02 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 04:32:02 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 04:32:02 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 04:32:02 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 04:32:02 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:32:02 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:32:02 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 04:32:02 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:32:02 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 04:32:02 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 04:32:02 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 04:32:02 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 04:32:02 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 04:32:02 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 04:32:02 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 04:32:02 IQ138000 kernel: libphy: stmmac: probed
Oct 11 04:32:02 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:32:02 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 04:32:02 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:32:02 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 04:32:02 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 04:32:02 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:32:02 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 04:32:02 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 04:32:02 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 04:32:02 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 04:32:02 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 04:32:02 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 04:32:02 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:32:02 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 04:32:02 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 04:32:02 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 04:32:02 IQ138000 kernel: of_cfs_init
Oct 11 04:32:02 IQ138000 kernel: of_cfs_init: OK
Oct 11 04:32:02 IQ138000 kernel: ALSA device list:
Oct 11 04:32:02 IQ138000 kernel:   No soundcards found.
Oct 11 04:32:02 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 04:32:02 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 04:32:02 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 04:32:02 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 04:32:02 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 04:32:02 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 04:32:02 IQ138000 kernel: devtmpfs: mounted
Oct 11 04:32:02 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 04:32:02 IQ138000 kernel: Run /sbin/init as init process
Oct 11 04:32:02 IQ138000 kernel:   with arguments:
Oct 11 04:32:02 IQ138000 kernel:     /sbin/init
Oct 11 04:32:02 IQ138000 kernel:   with environment:
Oct 11 04:32:02 IQ138000 kernel:     HOME=/
Oct 11 04:32:02 IQ138000 kernel:     TERM=linux
Oct 11 04:32:02 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 04:32:02 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 04:32:02 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 04:32:02 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 04:32:02 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 04:32:02 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:32:02 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 04:32:02 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:32:02 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 04:32:02 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:32:02 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 04:32:02 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 04:32:02 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 04:32:02 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 04:32:02 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 04:32:02 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:32:02 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 04:32:02 IQ138000 systemd[1]: Reached target Paths.
Oct 11 04:32:02 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 04:32:02 IQ138000 systemd[1]: Reached target Slices.
Oct 11 04:32:02 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 04:32:02 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 04:32:02 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 04:32:02 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 04:32:02 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 04:32:02 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 04:32:02 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 04:32:02 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:32:02 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 04:32:02 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 04:32:02 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 04:32:02 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 04:32:02 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 04:32:02 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:32:02 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 04:32:02 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 04:32:02 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 04:32:02 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 04:32:02 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 04:32:02 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 04:32:02 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 04:32:02 IQ138000 systemd-journald[139]: Journal started
Oct 11 04:32:02 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 04:32:02 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 04:32:02 IQ138000 systemd[1]: Started Journal Service.
Oct 11 04:32:02 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 04:32:02 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 04:32:02 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 04:32:02 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 04:32:02 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 04:32:02 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:32:02 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:32:02 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 04:32:03 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 04:32:03 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 04:32:03 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 04:32:03 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 04:32:03 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 04:32:03 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 04:32:03 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 04:32:03 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 04:32:03 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 04:32:03 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 04:32:03 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 04:32:03 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 04:32:03 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 04:32:03 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 04:32:04 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 04:32:04 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 04:32:04 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 04:32:04 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 04:32:04 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 04:32:04 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 04:32:04 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 04:32:04 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 04:32:04 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 04:32:04 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 04:32:04 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 04:32:04 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 04:32:04 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 04:32:04 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 04:32:04 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 04:32:04 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 04:32:04 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 04:32:04 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 04:32:04 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 04:32:04 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 04:32:04 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 04:32:04 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 04:32:04 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 04:32:05 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:32:05 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 04:32:05 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 04:32:05 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 04:32:05 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 04:32:05 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 04:32:05 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 04:32:05 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 04:32:05 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 04:32:05 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 04:32:05 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 04:32:05 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 04:32:05 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 04:32:05 IQ138000 systemd-udevd[162]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:32:05 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:32:05 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:32:05 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:32:05 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 04:32:05 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:32:05 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:32:05 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 04:32:05 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 04:32:05 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 04:32:05 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 04:32:05 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 04:32:05 IQ138000 systemd[1]: Reached target Swap.
Oct 11 04:32:05 IQ138000 systemd-fsck[214]: data: clean, 16448/328656 files, 369237/1313536 blocks
Oct 11 04:32:05 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 04:32:05 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 04:32:05 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 04:32:05 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 04:32:05 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 04:32:05 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 04:32:05 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 04:32:05 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 04:32:05 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 04:32:05 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 48.698ms for 461 entries.
Oct 11 04:32:05 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 496.4M, max 496.6M, 224.0K free.
Oct 11 04:32:05 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 04:32:06 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 04:32:06 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 04:32:06 IQ138000 kernel: random: crng init done
Oct 11 04:32:06 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 04:32:06 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 04:32:06 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 04:32:06 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 04:32:06 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 04:32:06 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 04:32:06 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 04:32:06 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 04:32:06 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 04:32:06 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 04:32:07 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 04:32:07 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 04:32:07 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 04:32:07 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 04:32:07 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 04:32:07 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 04:32:07 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 04:32:07 IQ138000 systemd[1]: Reached target Timers.
Oct 11 04:32:07 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 04:32:07 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 04:32:07 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 04:32:07 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 04:32:07 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 04:32:07 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 04:32:07 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 04:32:07 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 04:32:07 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:32:07 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 04:32:07 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 04:32:07 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 04:32:07 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 04:32:07 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 04:32:07 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 04:32:07 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 04:32:07 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 04:32:07 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 04:32:07 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:32:07 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 04:32:07 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 04:32:07 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 04:32:07 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 04:32:07 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 04:32:07 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 04:32:07 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 04:32:07 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 04:32:07 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 04:32:07 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 04:32:07 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 04:32:07 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:32:07 IQ138000 migrate.sh[326]: Error: No such file or directory
Oct 11 04:32:07 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:32:07 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 04:32:07 IQ138000 migrate.sh[333]: Error: No such file or directory
Oct 11 04:32:07 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:32:08 IQ138000 systemd[1]: Started watch config files.
Oct 11 04:32:08 IQ138000 reverse-ssh.sh[346]: Error: No such file or directory
Oct 11 04:32:08 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 04:32:08 IQ138000 migrate.sh[353]: Error: No such file or directory
Oct 11 04:32:08 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 04:32:08 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 04:32:08 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 04:32:08 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 04:32:08 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 04:32:08 IQ138000 rules-preprocessor[335]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:32:08 IQ138000 rules-preprocessor[335]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Successfully dropped root privileges.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: avahi-daemon 0.8 starting up.
Oct 11 04:32:08 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 04:32:08 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 04:32:08 IQ138000 migrate.sh[367]: Error: No such file or directory
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Successfully called chroot().
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Successfully dropped remaining capabilities.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: No service file found in /etc/avahi/services.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv6 for mDNS.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv4 for mDNS.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Network interface enumeration completed.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Registering new address record for ::1 on lo.*.
Oct 11 04:32:08 IQ138000 avahi-daemon[363]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 04:32:08 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:32:08 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 04:32:08 IQ138000 migrate.sh[385]: Error: No such file or directory
Oct 11 04:32:08 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:32:08 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 04:32:08 IQ138000 wpa_supplicant[378]: Successfully initialized wpa_supplicant
Oct 11 04:32:08 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 04:32:08 IQ138000 systemd-logind[339]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 04:32:08 IQ138000 systemd-logind[339]: New seat seat0.
Oct 11 04:32:08 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:08 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 04:32:08 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 04:32:08 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 04:32:08 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:08 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:32:08 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:32:08 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:32:08 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 04:32:08 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 04:32:08 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:08 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:32:08 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 04:32:08 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:32:08 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:32:08 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:32:08 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 04:32:08 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 04:32:08 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 04:32:08 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:32:08 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:32:08 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 04:32:08 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 04:32:08 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 04:32:08 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 04:32:08 IQ138000 NetworkManager[404]: <info>  [1760157128.9480] NetworkManager (version 1.42.4) is starting... (boot:664dda8c-138f-4871-8953-dadc57e44a28)
Oct 11 04:32:08 IQ138000 NetworkManager[404]: <info>  [1760157128.9492] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 04:32:08 IQ138000 systemd[1]: Started User Login Management.
Oct 11 04:32:08 IQ138000 NetworkManager[404]: <info>  [1760157128.9651] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 04:32:08 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 04:32:08 IQ138000 monit[320]: Starting daemon monitor: monit.
Oct 11 04:32:08 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.0146] manager[0x6d7128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 04:32:09 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 04:32:09 IQ138000 systemd[1]: Started Network Manager.
Oct 11 04:32:09 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 04:32:09 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 04:32:09 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 04:32:09 IQ138000 avahi-daemon[363]: Server startup complete. Host name is IQ138000.local. Local service cookie is 476426880.
Oct 11 04:32:09 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 04:32:09 IQ138000 ModemManager[472]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 04:32:09 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 04:32:09 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6259] hostname: hostname: using hostnamed
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6262] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6313] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6480] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6505] manager[0x6d7128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6514] manager[0x6d7128]: rfkill: WWAN hardware radio set enabled
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6815] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.6945] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 04:32:09 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7094] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7406] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7446] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7489] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7500] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7510] manager: Networking is enabled by state file
Oct 11 04:32:09 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7574] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7577] settings: Loaded settings plugin: keyfile (internal)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7578] ifupdown: management mode: unmanaged
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7579] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.7581] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 04:32:09 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.8404] dhcp: init: Using DHCP client 'internal'
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.8430] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 04:32:09 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:32:09 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.8661] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.8858] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.8936] device (lo): Activation: starting connection 'lo' (1580212a-f13d-4c3f-94db-796205429cf2)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.9042] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 04:32:09 IQ138000 NetworkManager[404]: <info>  [1760157129.9080] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.2652] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.2702] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.2752] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.2792] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 04:32:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 04:32:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 04:32:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 04:32:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.4747] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.4797] device (wlan0): driver supports Access Point (AP) mode
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.4849] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 04:32:10 IQ138000 NetworkManager[404]: <info>  [1760157130.4874] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:10 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 04:32:11 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.2880] device (wlan1): driver supports Access Point (AP) mode
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.2949] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.3010] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.3943] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4008] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4038] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4388] modem-manager: ModemManager available
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4424] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4616] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4630] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.4669] device (lo): Activation: successful, device activated.
Oct 11 04:32:11 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.6953] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.6961] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.6983] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7000] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7128] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7138] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7159] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7186] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7231] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7284] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7306] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:32:11 IQ138000 NetworkManager[404]: <info>  [1760157131.7470] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:12 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 04:32:12 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 04:32:12 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 04:32:15 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 04:32:15 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:32:15 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 04:32:15 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:15 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:32:15 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 04:32:15 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 04:32:15 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 04:32:15 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:15 IQ138000 init.sh[1319]: ...
Oct 11 04:32:15 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 04:32:15 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:16 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 04:32:16 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 04:32:16 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 04:32:16 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 04:32:16 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:16 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:32:16 IQ138000 init.sh[1319]: ...
Oct 11 04:32:16 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 04:32:16 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:17 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 04:32:17 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 04:32:17 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 04:32:17 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 04:32:17 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:17 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 04:32:17 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 04:32:17 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:32:17 IQ138000 init.sh[1319]: ...
Oct 11 04:32:17 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 04:32:17 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 04:32:17 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 04:32:17 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 04:32:17 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 04:32:18 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 04:32:18 IQ138000 systemd[1]: Reached target Network.
Oct 11 04:32:18 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 04:32:18 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 04:32:18 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:32:18 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:32:18 IQ138000 lsyncd[1615]: 04:32:18 Normal: --- Startup ---
Oct 11 04:32:18 IQ138000 lsyncd[1615]: 04:32:18 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:32:18 IQ138000 lsyncd[1615]: messages
Oct 11 04:32:18 IQ138000 lsyncd[1615]: iq_network_manager/iq_network_manager.log
Oct 11 04:32:18 IQ138000 lsyncd[1615]: journal
Oct 11 04:32:18 IQ138000 knxd[1608]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:32:18 IQ138000 knxd[1608]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:32:18 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 04:32:18 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 04:32:18 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:32:18 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 04:32:18 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 04:32:18 IQ138000 lsyncd[1631]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:32:18 IQ138000 lsyncd[1623]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:32:18 IQ138000 lsyncd[1623]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 04:32:18 IQ138000 lsyncd[1615]: 04:32:18 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:32:18 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 04:32:18 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 04:32:18 IQ138000 ntpd[1629]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 04:32:18 IQ138000 ntpd[1629]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 04:32:18 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 04:32:18 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 04:32:18 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 04:32:18 IQ138000 ntpd[1629]: ntp-4 is maintained by Network Time Foundation,
Oct 11 04:32:18 IQ138000 ntpd[1629]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 04:32:18 IQ138000 ntpd[1629]: corporation.  Support and training for ntp-4 are
Oct 11 04:32:18 IQ138000 ntpd[1629]: available at https://www.nwtime.org/support
Oct 11 04:32:18 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 04:32:18 IQ138000 ntpd[1659]: proto: precision = 1.083 usec (-20)
Oct 11 04:32:18 IQ138000 ntpd[1659]: basedate set to 2020-09-11
Oct 11 04:32:18 IQ138000 ntpd[1659]: gps base set to 2020-09-13 (week 2123)
Oct 11 04:32:18 IQ138000 ntpd[1659]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 04:32:18 IQ138000 ntpd[1659]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 04:32:18 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 04:32:18 IQ138000 ntpd[1659]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 04:32:18 IQ138000 ntpd[1659]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 04:32:18 IQ138000 ntpd[1659]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 04:32:18 IQ138000 ntpd[1659]: Listen normally on 3 lo [::1]:123
Oct 11 04:32:18 IQ138000 ntpd[1659]: Listening on routing socket on fd #20 for interface updates
Oct 11 04:32:18 IQ138000 persist_meter_data.sh[1648]: Error: No such file or directory
Oct 11 04:32:18 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 04:32:18 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 04:32:19 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 04:32:19 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:32:19 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:32:19 IQ138000 wb-connection-manager[1505]: Connection LegacyWiFi not found, skipping
Oct 11 04:32:19 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 04:32:19 IQ138000 wb-mqtt-w1[1701]: MQTT broker localhost:1883
Oct 11 04:32:19 IQ138000 wb-mqtt-w1[1701]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:19 IQ138000 wb-mqtt-w1[1701]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:32:19 IQ138000 wb-mqtt-w1[1701]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 04:32:19 IQ138000 wb-mqtt-w1[1701]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 04:32:19 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:32:19 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:32:19 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 04:32:19 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 04:32:19 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 04:32:19 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:32:19 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 04:32:19 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 04:32:19 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:19 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:32:19 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:32:19 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:32:19 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 04:32:19 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:19 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 04:32:19 IQ138000 vnstatd[1666]: Info: vnStat daemon 2.6 started. (pid:1666 uid:110 gid:117 64-bit)
Oct 11 04:32:19 IQ138000 vnstatd[1666]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 04:32:19 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 04:32:19 IQ138000 vnstatd[1666]: Info: Interface "ppp0" disabled.
Oct 11 04:32:19 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 04:32:19 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:32:19 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 04:32:19 IQ138000 ntpd[1659]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:32:19 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 04:32:19 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 04:32:19 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 04:32:19 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 04:32:19 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 04:32:19 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 04:32:19 IQ138000 sshd[1758]: Server listening on 0.0.0.0 port 22.
Oct 11 04:32:19 IQ138000 sshd[1758]: Server listening on :: port 22.
Oct 11 04:32:19 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 04:32:20 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 04:32:20 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 04:32:20 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 04:32:20 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 04:32:20 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:20 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 04:32:20 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 04:32:20 IQ138000 NetworkManager[404]: <error> [1760157140.2701] audit: failed to open auditd socket: Protocol not supported
Oct 11 04:32:20 IQ138000 NetworkManager[404]: <info>  [1760157140.2704] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1505 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:32:20 IQ138000 wb-connection-manager[1505]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 04:32:20 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:20 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:32:20 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 04:32:20 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:32:20 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:32:20 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 04:32:20 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:32:20 IQ138000 knxd[1850]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:32:20 IQ138000 knxd[1850]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:32:20 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:32:20 IQ138000 wpa_supplicant[378]: wlan0: Reject scan trigger since one is already pending
Oct 11 04:32:20 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 04:32:20 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 04:32:20 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 04:32:20 IQ138000 reverse-ssh.sh[1890]: Error: No such file or directory
Oct 11 04:32:20 IQ138000 ntpd[1659]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:32:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:32:20 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 04:32:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:32:20 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:20 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:32:20 IQ138000 NetworkManager[404]: <info>  [1760157140.9753] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:32:20 IQ138000 NetworkManager[404]: <info>  [1760157140.9760] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1505 uid=0 result="success"
Oct 11 04:32:20 IQ138000 NetworkManager[404]: <info>  [1760157140.9791] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:20 IQ138000 NetworkManager[404]: <info>  [1760157140.9816] manager: NetworkManager state is now CONNECTING
Oct 11 04:32:20 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0030] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0055] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0243] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0559] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0805] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0829] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0835] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0836] Config: added 'scan_ssid' value '1'
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0837] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0839] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.0840] Config: added 'psk' value '<hidden>'
Oct 11 04:32:21 IQ138000 wb-adjust-systime[1891]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 04:32:21 IQ138000 wb-adjust-systime[1891]: Drift file is valid (was recently edited)
Oct 11 04:32:21 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.3227] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:32:21 IQ138000 NetworkManager[404]: <info>  [1760157141.3230] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Warning: Error resolving bridge address: Name or service not known.
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 04:32:21 IQ138000 mosquitto[1945]: 1760157141: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 04:32:21 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 04:32:21 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 04:32:21 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 04:32:21 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 04:32:21 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 04:32:21 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 04:32:21 IQ138000 ntpd[1659]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:32:21 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 04:32:21 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 04:32:21 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 04:32:22 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: MQTT broker localhost:1883
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: Config file /etc/wb-mqtt-db.conf
Oct 11 04:32:22 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:22 IQ138000 wb-mqtt-knx[2063]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:22 IQ138000 wb-mqtt-knx[2063]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:22 IQ138000 systemd[1]: Started metrics sender.
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: INFO: [sqlite] Creating tables if necessary
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: INFO: [sqlite] Create indices if necessary
Oct 11 04:32:22 IQ138000 wb-mqtt-db[2046]: INFO: [sqlite] Analyzing data table
Oct 11 04:32:22 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 04:32:22 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 04:32:22 IQ138000 wb-mqtt-logs[2076]: MQTT broker localhost:1883
Oct 11 04:32:22 IQ138000 wb-mqtt-logs[2076]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:22 IQ138000 wb-mqtt-logs[2076]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:22 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio driver] Started
Oct 11 04:32:22 IQ138000 ntpd[1659]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:32:22 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:32:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:32:23 IQ138000 wb-mqtt-confed[2037]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:32:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.539s CPU time.
Oct 11 04:32:23 IQ138000 wb-mqtt-confed[2037]: INFO: [wbgo_mqtt] confed-IQ138000-2037: MQTT connection established
Oct 11 04:32:23 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 04:32:23 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:32:23 IQ138000 wb-mqtt-opcua[2116]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 04:32:23 IQ138000 wb-mqtt-iec104[2053]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 04:32:23 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 04:32:23 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 04:32:24 IQ138000 wb-mqtt-mbgate[2091]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 04:32:24 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 04:32:24 IQ138000 wb-mqtt-iec104[2249]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 04:32:24 IQ138000 wb-mqtt-opcua[2238]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 04:32:24 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 04:32:24 IQ138000 wb-mqtt-opcua[2238]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 04:32:24 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:24 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 04:32:24 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:32:24 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 04:32:24 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 04:32:24 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 04:32:25 IQ138000 wb-mqtt-logs[2076]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:25 IQ138000 wb-mqtt-logs[2076]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:25 IQ138000 wb-mqtt-logs[2076]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:25 IQ138000 wb-mqtt-logs[2076]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:32:25 IQ138000 wb-mqtt-iec104[2249]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 04:32:25 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 04:32:25 IQ138000 wb-mqtt-knx[2063]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:25 IQ138000 wb-mqtt-knx[2063]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:25 IQ138000 wb-mqtt-knx[2063]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:25 IQ138000 wb-mqtt-knx[2063]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:32:25 IQ138000 wb-mqtt-knx[2063]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 04:32:26 IQ138000 python3[2006]: No data file found at /tmp/network_status_cache.json
Oct 11 04:32:26 IQ138000 python3[2006]: Connecting to MQTT
Oct 11 04:32:26 IQ138000 NetworkManager[404]: <info>  [1760157146.5709] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:32:26 IQ138000 NetworkManager[404]: <info>  [1760157146.5711] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:32:26 IQ138000 python3[2006]: Connected to MQTT
Oct 11 04:32:26 IQ138000 python3[2006]: Connection returned result: Connection Accepted.
Oct 11 04:32:28 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2111 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:32:28 IQ138000 wb-device-manager[2018]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 04:32:28 IQ138000 wb-device-manager[2018]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New virtual device lo 1580212a-f13d-4c3f-94db-796205429cf2 /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:32:28 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:32:29 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New active connection lo 1580212a-f13d-4c3f-94db-796205429cf2 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 04:32:29 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:29 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:30 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 04:32:30 IQ138000 kernel: dc5ldo: disabling
Oct 11 04:32:30 IQ138000 kernel: dldo4: disabling
Oct 11 04:32:30 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 04:32:30 IQ138000 kernel: vcc-sd: disabling
Oct 11 04:32:30 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: MQTT broker localhost:1883
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] ADC worker thread is started
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:32:30 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:32:31 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:31 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:32:31 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:32:31 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:32:31 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:32:31 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:32:31 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 04:32:31 IQ138000 knxd[3184]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:32:31 IQ138000 knxd[3184]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:32:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:32:31 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:31 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:32:31 IQ138000 wb-mqtt-confed[2037]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 04:32:31 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-mqtt-serial[1685]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 04:32:32 IQ138000 wb-gsm[3337]: main: Called from pid 1 (systemd)
Oct 11 04:32:32 IQ138000 wb-gsm[3391]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:32:32 IQ138000 wb-usb-otg-start.sh[3414]: : wb-usb-otg-start
Oct 11 04:32:32 IQ138000 wb-usb-otg-start.sh[3414]: main: setup_device()
Oct 11 04:32:32 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 04:32:33 IQ138000 wb-gsm[3445]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:32:33 IQ138000 wb-mqtt-db[2046]: INFO: [sqlite] DB initialization is done
Oct 11 04:32:33 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 04:32:33 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 04:32:33 IQ138000 kernel: using random self ethernet address
Oct 11 04:32:33 IQ138000 kernel: using random host ethernet address
Oct 11 04:32:33 IQ138000 wb-usb-otg-start.sh[3414]: main: enabling profile rndis
Oct 11 04:32:33 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 04:32:33 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 04:32:33 IQ138000 systemd-udevd[3411]: Using default interface naming scheme 'v247'.
Oct 11 04:32:33 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 04:32:33 IQ138000 NetworkManager[404]: <info>  [1760157153.3223] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 04:32:33 IQ138000 NetworkManager[404]: <info>  [1760157153.4889] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:32:33 IQ138000 wb-gsm[3497]: should_enable: Should enable GSM modem
Oct 11 04:32:33 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 04:32:33 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: DB logger started, go to main loop
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 04:32:34 IQ138000 wb-gsm[3577]: main: Called from pid 3499 (wb-gsm-mm)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 04:32:34 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 04:32:34 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 04:32:35 IQ138000 wb-mqtt-db[2046]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 04:32:35 IQ138000 wb-gsm[3589]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 04:32:35 IQ138000 wb-gsm[3613]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 04:32:35 IQ138000 NetworkManager[404]: <info>  [1760157155.4163] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:32:35 IQ138000 NetworkManager[404]: <info>  [1760157155.4167] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 04:32:35 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 04:32:35 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 04:32:35 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 04:32:36 IQ138000 npm[1710]: > zigbee2mqtt@2.1.1 start
Oct 11 04:32:36 IQ138000 npm[1710]: > node index.js
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 04:32:36 IQ138000 python3[2006]: Выполнение: service wb-connection-manager stop
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:32:36 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:32:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:38 IQ138000 wb-gsm[3997]: mm_off: Modem is already OFF
Oct 11 04:32:38 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:32:39 IQ138000 wb-gsm[4067]: main: Called from pid 3499 (wb-gsm-mm)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:32:39 IQ138000 wb-gsm[4078]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:32:39 IQ138000 wb-gsm[4101]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:32:39 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:32:40 IQ138000 npm[3679]: Starting Zigbee2MQTT without watchdog.
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:40 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:32:41 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 4876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:42 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:43 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:32:44 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:44 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:44 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:44 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:44 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 04:32:44 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:32:44 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:32:44 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:32:44 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:32:44 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:32:44 IQ138000 knxd[4504]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:32:44 IQ138000 knxd[4504]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:32:44 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:32:44 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:32:44 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:44 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:44 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 04:32:44 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:32:44 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:32:44 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: MQTT broker localhost:1883
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:32:44 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 04:32:44 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 04:32:44 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.150s CPU time.
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:32:44 IQ138000 python3[2006]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 04:32:44 IQ138000 python3[2006]:  
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: w1 thread Started
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:32:44 IQ138000 wb-mqtt-w1[4509]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:32:44 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:32:45 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:45 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:32:46 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <warn>  [1760157166.5289] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <info>  [1760157166.5291] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <info>  [1760157166.5310] manager: NetworkManager state is now DISCONNECTED
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <warn>  [1760157166.5330] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:32:46 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <info>  [1760157166.5345] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:32:46 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:46 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <info>  [1760157166.5767] manager: startup complete
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <info>  [1760157166.5780] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:32:46 IQ138000 NetworkManager[404]: <info>  [1760157166.5782] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:32:46 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 04:32:46 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 04:32:46 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 04:32:46 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:32:46 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:32:46 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:32:46 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:32:46 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 04:32:46 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:32:47 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:32:47 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:32:47 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 04:32:47 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:47 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:47 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:32:48 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:49 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:49 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:49 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:32:49 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:32:49 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:32:49 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:32:49 IQ138000 python3[2006]: Выполнение: mmcli -m wbc
Oct 11 04:32:49 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:50 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:32:50 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 04:32:50 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:32:50 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 04:32:50 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 04:32:50 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:32:50 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:32:50 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:32:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:32:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:32:50 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:32:50 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:32:50 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:32:50 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 04:32:50 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:50 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 04:32:50 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 04:32:50 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:32:50 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 04:32:50 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:32:50 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 04:32:50 IQ138000 watchdog[4626]: starting daemon (5.16):
Oct 11 04:32:50 IQ138000 watchdog[4626]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 04:32:50 IQ138000 watchdog[4626]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 04:32:50 IQ138000 watchdog[4626]:  ping: no machine to check
Oct 11 04:32:50 IQ138000 watchdog[4626]:  file: no file to check
Oct 11 04:32:50 IQ138000 watchdog[4626]:  pidfile: /var/run/sshd.pid
Oct 11 04:32:50 IQ138000 watchdog[4626]:  interface: no interface to check
Oct 11 04:32:50 IQ138000 watchdog[4626]:  temperature: no sensors to check
Oct 11 04:32:50 IQ138000 watchdog[4626]:  no test binary files
Oct 11 04:32:50 IQ138000 watchdog[4626]:  no repair binary files
Oct 11 04:32:50 IQ138000 watchdog[4626]:  error retry time-out = 30 seconds
Oct 11 04:32:50 IQ138000 watchdog[4626]:  repair attempts = 1
Oct 11 04:32:50 IQ138000 watchdog[4626]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 04:32:50 IQ138000 watchdog[4626]: watchdog now set to 120 seconds
Oct 11 04:32:50 IQ138000 watchdog[4626]: hardware watchdog identity: WBEC WDT
Oct 11 04:32:50 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 04:32:50 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 04:32:50 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 04:32:50 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 04:32:50 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 04:32:50 IQ138000 systemd[1]: Startup finished in 3.786s (kernel) + 50.222s (userspace) = 54.008s.
Oct 11 04:32:50 IQ138000 wb-rules[4615]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:32:50 IQ138000 wb-rules[4615]: INFO: driver is created
Oct 11 04:32:50 IQ138000 wb-rules[4615]: INFO: [wbgo_mqtt] rules-IQ138000-4615: MQTT connection established
Oct 11 04:32:50 IQ138000 wb-rules[4615]: INFO: driver loop is started
Oct 11 04:32:50 IQ138000 wb-rules[4615]: INFO: wait for driver to become ready
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:50 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:32:51 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 6 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:51 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:51 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:52 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 04:32:52 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, da:b8:d7:f7:73:f2
Oct 11 04:32:52 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 04:32:52 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 04:32:52 IQ138000 NetworkManager[404]: <info>  [1760157172.2715] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 04:32:52 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 04:32:52 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 04:32:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 04:32:52 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 04:32:52 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 04:32:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 04:32:52 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 04:32:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 systemd-udevd[4658]: Using default interface naming scheme 'v247'.
Oct 11 04:32:52 IQ138000 systemd-udevd[4658]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 5 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:52 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-rules[4615]: INFO: driver is ready
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-rules[4615]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 04:32:53 IQ138000 wb-rules[4615]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4615: MQTT connection established
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-rules[4615]: INFO: [engine] Starting main loop
Oct 11 04:32:53 IQ138000 wb-rules[4615]: INFO: the engine is ready
Oct 11 04:32:53 IQ138000 wb-rules[4615]: INFO: [engine] Starting sync loop
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:53 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-rules[4615]: WARNING: [rule warning] DAC: no config file
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:54 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 04:32:54 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:32:54 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:54 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 04:32:55 IQ138000 knxd[4988]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:32:55 IQ138000 knxd[4988]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:32:55 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:32:55 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:32:55 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:32:55 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:55 IQ138000 wb-gsm[4998]: mm_on: Waiting for modem to start
Oct 11 04:32:55 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:55 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 04:32:55 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 04:32:55 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:55 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:55 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:56 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:56 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 04:32:56 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:32:56 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 04:32:56 IQ138000 python3[2006]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:56 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 wb-rules[4615]: INFO: all rule files are loaded
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:32:57 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:32:58 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 04:32:58 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 04:32:59 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 04:32:59 IQ138000 npm[3679]: [2025-10-11 04:32:59] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 04:32:59 IQ138000 npm[3679]: [2025-10-11 04:32:59] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 04:32:59 IQ138000 npm[3679]: [2025-10-11 04:32:59] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:32:59 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:33:00 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:33:00 IQ138000 npm[3679]: [2025-10-11 04:33:00] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 04:33:00 IQ138000 npm[3679]: [2025-10-11 04:33:00] info:         zh:zstack:znp: Serialport opened
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:00 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 04:33:01 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:01 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:33:01 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:33:01 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:33:01 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:33:02 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: Currently 4 devices are joined.
Oct 11 04:33:03 IQ138000 npm[3679]: [2025-10-11 04:33:03] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 04:33:03 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:03 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m: Connected to MQTT server
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-rules[4615]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:33:04 IQ138000 wb-rules[4615]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:33:04 IQ138000 wb-rules[4615]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:33:04 IQ138000 wb-rules[4615]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m: Started frontend on port 8282
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 04:33:04 IQ138000 npm[3679]: [2025-10-11 04:33:04] info:         z2m: Zigbee2MQTT started!
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 07:33:04.732+00:00
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T07:33:04.732Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157364753,"cmd_timestamp_ms":1760157184753,"source":"schedule"}
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157364753,"cmd_timestamp_ms":1760157184753,"source":"schedule"}
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 07:33:04.810+00:00
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T07:33:04.810Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157364822,"cmd_timestamp_ms":1760157184822,"source":"schedule"}
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157364822,"cmd_timestamp_ms":1760157184822,"source":"schedule"}
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 07:33:04.982+00:00
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 04:33:04 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T07:33:04.982Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365000,"cmd_timestamp_ms":1760157185000,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365000,"cmd_timestamp_ms":1760157185000,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 07:33:05.140+00:00
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T07:33:05.140Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365153,"cmd_timestamp_ms":1760157185153,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365153,"cmd_timestamp_ms":1760157185153,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 04:33:05 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:33:05 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:33:05 IQ138000 knxd[5155]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:33:05 IQ138000 knxd[5155]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:33:05 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:33:05 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:33:05 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 07:33:05.320+00:00
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T07:33:05.320Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365335,"cmd_timestamp_ms":1760157185335,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365335,"cmd_timestamp_ms":1760157185335,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 07:33:05.456+00:00
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T07:33:05.456Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365469,"cmd_timestamp_ms":1760157185469,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365469,"cmd_timestamp_ms":1760157185469,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 07:33:05.632+00:00
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T07:33:05.632Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365645,"cmd_timestamp_ms":1760157185645,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365645,"cmd_timestamp_ms":1760157185645,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 04:33:05 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:05 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 07:33:05.808+00:00
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T07:33:05.808Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365820,"cmd_timestamp_ms":1760157185820,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157365820,"cmd_timestamp_ms":1760157185820,"source":"schedule"}
Oct 11 04:33:05 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 07:33:06.170+00:00
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T07:33:06.170Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157366182,"cmd_timestamp_ms":1760157186182,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157366182,"cmd_timestamp_ms":1760157186182,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 07:33:06.364+00:00
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T07:33:06.364Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:06 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157366385,"cmd_timestamp_ms":1760157186385,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157366385,"cmd_timestamp_ms":1760157186385,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 07:33:06.539+00:00
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T07:33:06.539Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157366551,"cmd_timestamp_ms":1760157186551,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157366551,"cmd_timestamp_ms":1760157186551,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 07:33:06.709+00:00
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T07:33:06.709Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760157366721,"cmd_timestamp_ms":1760157186721,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760157366721,"cmd_timestamp_ms":1760157186721,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 04:33:06 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 07:33:06.885+00:00
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T07:33:06.885Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760157366899,"cmd_timestamp_ms":1760157186899,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760157366899,"cmd_timestamp_ms":1760157186899,"source":"schedule"}
Oct 11 04:33:06 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:06 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:33:07 IQ138000 wb-watchdog[5228]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 07:33:07.062+00:00
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T07:33:07.062Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157367080,"cmd_timestamp_ms":1760157187080,"source":"schedule"}
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157367080,"cmd_timestamp_ms":1760157187080,"source":"schedule"}
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 07:33:07.223+00:00
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T07:33:07.223Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157367231,"cmd_timestamp_ms":1760157187231,"source":"schedule"}
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157367231,"cmd_timestamp_ms":1760157187231,"source":"schedule"}
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 04:33:07 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 04:33:07 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 04:33:08 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 04:33:08 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 04:33:08 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 04:33:08 IQ138000 wb-rules[4615]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 04:33:08 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:08 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:08 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:33:08 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 04:33:08 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:33:08 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 04:33:08 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:10 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:10 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:33:10 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:10 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:33:10 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:33:10 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:11 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 ModemManager[472]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 04:33:12 IQ138000 ModemManager[472]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:12 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:13 IQ138000 wb-mqtt-serial[1685]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 04:33:13 IQ138000 ModemManager[472]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 04:33:13 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:13 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:33:13 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:33:14 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:33:14 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:33:14 IQ138000 python3[2006]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:33:14 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:33:14 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:33:14 IQ138000 ModemManager[472]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.6968] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.6991] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.7049] device (ttyUSB1): modem state 'enabling'
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.7077] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.7118] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.7170] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.7198] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:14 IQ138000 NetworkManager[404]: <info>  [1760157194.7242] manager: NetworkManager state is now CONNECTING
Oct 11 04:33:14 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:14 IQ138000 ModemManager[472]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 04:33:14 IQ138000 wb-mqtt-nm-helper[2111]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 04:33:14 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:14 IQ138000 ModemManager[472]: <info>  [modem0] power state updated: on
Oct 11 04:33:15 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:33:15 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:15 IQ138000 python3[2006]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:33:15 IQ138000 python3[2006]:    --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:33:15 IQ138000 python3[2006]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:33:15 IQ138000 python3[2006]:            |                model: A7602E-H
Oct 11 04:33:15 IQ138000 python3[2006]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:33:15 IQ138000 python3[2006]:            |            supported: gsm-umts
Oct 11 04:33:15 IQ138000 python3[2006]:            |              current: gsm-umts
Oct 11 04:33:15 IQ138000 python3[2006]:            |         equipment id: 860803062234204
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   System   |               device: wbc
Oct 11 04:33:15 IQ138000 python3[2006]:            |              drivers: option, rndis_host
Oct 11 04:33:15 IQ138000 python3[2006]:            |               plugin: simtech
Oct 11 04:33:15 IQ138000 python3[2006]:            |         primary port: ttyUSB1
Oct 11 04:33:15 IQ138000 python3[2006]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:33:15 IQ138000 python3[2006]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:33:15 IQ138000 python3[2006]:            |                state: enabling
Oct 11 04:33:15 IQ138000 python3[2006]:            |          power state: on
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:33:15 IQ138000 python3[2006]:            |              current: allowed: any; preferred: none
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   3GPP     |                 imei: 860803062234204
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:33:15 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:15 IQ138000 python3[2006]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:15 IQ138000 python3[2006]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:33:15 IQ138000 python3[2006]:            |                       slot 2: none
Oct 11 04:33:15 IQ138000 python3[2006]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 04:33:15 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:15 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 04:33:15 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:33:15 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:33:15 IQ138000 python3[2006]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 04:33:15 IQ138000 python3[2006]:  successfully requested primary SIM switch in modem
Oct 11 04:33:15 IQ138000 knxd[5375]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:33:15 IQ138000 knxd[5375]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:33:15 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:33:15 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:33:15 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:33:15 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:15 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:15 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:16 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:16 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:16 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:17 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:17 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:33:17 IQ138000 wb-mqtt-serial[1685]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:33:18 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] simple connect started...
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (6/10): register
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 04:33:18 IQ138000 ModemManager[472]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 04:33:18 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:19 IQ138000 ModemManager[472]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 04:33:19 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.3178] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.3191] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.3223] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.3244] ppp-manager: starting PPP connection
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.3378] ppp-manager: pppd started with pid 5412
Oct 11 04:33:19 IQ138000 pppd[5412]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: initializing
Oct 11 04:33:19 IQ138000 pppd[5412]: pppd 2.4.9 started by root, uid 0
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 04:33:19 IQ138000 pppd[5412]: Using interface ppp0
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: Using interface ppp0
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 04:33:19 IQ138000 pppd[5412]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.4044] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 04:33:19 IQ138000 pppd[5412]: PAP authentication succeeded
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: PAP authentication succeeded
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: kernel does not support PPP filtering
Oct 11 04:33:19 IQ138000 pppd[5412]: kernel does not support PPP filtering
Oct 11 04:33:19 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 04:33:19 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 04:33:19 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:33:19 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 04:33:19 IQ138000 ModemManager[472]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 04:33:19 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:33:19 IQ138000 lsyncd[5425]: 04:33:19 Normal: --- Startup ---
Oct 11 04:33:19 IQ138000 lsyncd[5425]: 04:33:19 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:33:19 IQ138000 lsyncd[5425]: journal
Oct 11 04:33:19 IQ138000 lsyncd[5425]: iq_network_manager/iq_network_manager.log
Oct 11 04:33:19 IQ138000 lsyncd[5425]: messages
Oct 11 04:33:19 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:33:19 IQ138000 lsyncd[5427]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:33:19 IQ138000 lsyncd[5426]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:33:19 IQ138000 lsyncd[5426]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 04:33:19 IQ138000 lsyncd[5425]: 04:33:19 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:33:19 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:33:19 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:33:19 IQ138000 wb-rules[4615]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:33:19 IQ138000 pppd[5412]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:33:19 IQ138000 pppd[5412]: local  IP address 10.168.239.42
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: local  IP address 10.168.239.42
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: remote IP address 10.64.64.64
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: primary   DNS address 172.23.10.131
Oct 11 04:33:19 IQ138000 NetworkManager[5412]: secondary DNS address 172.23.10.130
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 04:33:19 IQ138000 pppd[5412]: remote IP address 10.64.64.64
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.9508] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:33:19 IQ138000 pppd[5412]: primary   DNS address 172.23.10.131
Oct 11 04:33:19 IQ138000 pppd[5412]: secondary DNS address 172.23.10.130
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: ip-up event
Oct 11 04:33:19 IQ138000 pppd[5412]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.9601] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.9691] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.9739] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 04:33:19 IQ138000 NetworkManager[404]: <info>  [1760157199.9805] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 04:33:19 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:19 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:33:19 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 04:33:20 IQ138000 NetworkManager[404]: <info>  [1760157200.0522] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:20 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:33:20 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:33:20 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:20 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:33:20 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:33:20 IQ138000 NetworkManager[404]: <info>  [1760157200.1360] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:20 IQ138000 NetworkManager[404]: <info>  [1760157200.1375] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 04:33:20 IQ138000 NetworkManager[404]: <info>  [1760157200.1396] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 04:33:20 IQ138000 NetworkManager[404]: <info>  [1760157200.1444] device (ttyUSB1): Activation: successful, device activated.
Oct 11 04:33:20 IQ138000 NetworkManager[404]: <info>  [1760157200.1485] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 04:33:20 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:20 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:20 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:20 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:20 IQ138000 vnstatd[1666]: Info: Interface "ppp0" enabled.
Oct 11 04:33:21 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:33:21 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:21 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:33:21 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:21 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:33:21 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:21 IQ138000 wb-rules[4615]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:33:21 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:21 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:33:21 IQ138000 ntpd[1659]: Listen normally on 4 ppp0 10.168.239.42:123
Oct 11 04:33:21 IQ138000 ntpd[1659]: new interface(s) found: waking up resolver
Oct 11 04:33:22 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:22 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:22 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:23 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:33:24 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:33:25 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:33:25 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:33:25 IQ138000 wb-mqtt-serial[1685]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:33:25 IQ138000 wb-mqtt-serial[1685]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:33:25 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:25 IQ138000 python3[2006]: Выполнение: mmcli -i any
Oct 11 04:33:25 IQ138000 python3[2006]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 04:33:25 IQ138000 python3[2006]:    -------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:25 IQ138000 python3[2006]:   -------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Properties |            active: yes
Oct 11 04:33:25 IQ138000 python3[2006]:              |              imsi: 250997340491874
Oct 11 04:33:25 IQ138000 python3[2006]:              |             iccid: 8970199210429593744
Oct 11 04:33:25 IQ138000 python3[2006]:              |       operator id: 25099
Oct 11 04:33:25 IQ138000 python3[2006]:              |     operator name: Beeline
Oct 11 04:33:25 IQ138000 python3[2006]: Выполнение: mmcli -m wbc
Oct 11 04:33:25 IQ138000 python3[2006]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:33:25 IQ138000 python3[2006]:    --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:33:25 IQ138000 python3[2006]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:33:25 IQ138000 python3[2006]:            |                model: A7602E-H
Oct 11 04:33:25 IQ138000 python3[2006]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:33:25 IQ138000 python3[2006]:            |            supported: gsm-umts
Oct 11 04:33:25 IQ138000 python3[2006]:            |              current: gsm-umts
Oct 11 04:33:25 IQ138000 python3[2006]:            |         equipment id: 860803062234204
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   System   |               device: wbc
Oct 11 04:33:25 IQ138000 python3[2006]:            |              drivers: option, rndis_host
Oct 11 04:33:25 IQ138000 python3[2006]:            |               plugin: simtech
Oct 11 04:33:25 IQ138000 python3[2006]:            |         primary port: ttyUSB1
Oct 11 04:33:25 IQ138000 python3[2006]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:33:25 IQ138000 python3[2006]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:33:25 IQ138000 python3[2006]:            |                state: connected
Oct 11 04:33:25 IQ138000 python3[2006]:            |          power state: on
Oct 11 04:33:25 IQ138000 python3[2006]:            |          access tech: lte
Oct 11 04:33:25 IQ138000 python3[2006]:            |       signal quality: 93% (recent)
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:33:25 IQ138000 python3[2006]:            |              current: allowed: any; preferred: none
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   3GPP     |                 imei: 860803062234204
Oct 11 04:33:25 IQ138000 python3[2006]:            |          operator id: 25099
Oct 11 04:33:25 IQ138000 python3[2006]:            |        operator name: beeline
Oct 11 04:33:25 IQ138000 python3[2006]:            |         registration: home
Oct 11 04:33:25 IQ138000 python3[2006]:            | packet service state: attached
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:25 IQ138000 python3[2006]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:33:25 IQ138000 python3[2006]:            |                       slot 2: none
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:33:25 IQ138000 python3[2006]: Current state: home
Oct 11 04:33:25 IQ138000 python3[2006]: SIM registered in the network.
Oct 11 04:33:25 IQ138000 python3[2006]: Выполнение: mmcli -m wbc
Oct 11 04:33:25 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 04:33:25 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:33:25 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:33:25 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:33:25 IQ138000 wb-mqtt-knx[2063]: INFO: knxd connected successfully
Oct 11 04:33:25 IQ138000 python3[2006]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:33:25 IQ138000 python3[2006]:    --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:33:25 IQ138000 python3[2006]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:33:25 IQ138000 python3[2006]:            |                model: A7602E-H
Oct 11 04:33:25 IQ138000 python3[2006]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:33:25 IQ138000 python3[2006]:            |            supported: gsm-umts
Oct 11 04:33:25 IQ138000 python3[2006]:            |              current: gsm-umts
Oct 11 04:33:25 IQ138000 python3[2006]:            |         equipment id: 860803062234204
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   System   |               device: wbc
Oct 11 04:33:25 IQ138000 python3[2006]:            |              drivers: option, rndis_host
Oct 11 04:33:25 IQ138000 python3[2006]:            |               plugin: simtech
Oct 11 04:33:25 IQ138000 python3[2006]:            |         primary port: ttyUSB1
Oct 11 04:33:25 IQ138000 python3[2006]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:33:25 IQ138000 python3[2006]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:33:25 IQ138000 python3[2006]:            |                state: connected
Oct 11 04:33:25 IQ138000 python3[2006]:            |          power state: on
Oct 11 04:33:25 IQ138000 python3[2006]:            |          access tech: lte
Oct 11 04:33:25 IQ138000 python3[2006]:            |       signal quality: 93% (recent)
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:33:25 IQ138000 python3[2006]:            |              current: allowed: any; preferred: none
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   3GPP     |                 imei: 860803062234204
Oct 11 04:33:25 IQ138000 python3[2006]:            |          operator id: 25099
Oct 11 04:33:25 IQ138000 python3[2006]:            |        operator name: beeline
Oct 11 04:33:25 IQ138000 python3[2006]:            |         registration: home
Oct 11 04:33:25 IQ138000 python3[2006]:            | packet service state: attached
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:25 IQ138000 python3[2006]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:33:25 IQ138000 python3[2006]:            |                       slot 2: none
Oct 11 04:33:25 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:33:25 IQ138000 python3[2006]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:25 IQ138000 python3[2006]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:33:25 IQ138000 python3[2006]:    -------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:25 IQ138000 python3[2006]:   -------------------------------
Oct 11 04:33:25 IQ138000 python3[2006]:   Properties |            active: yes
Oct 11 04:33:25 IQ138000 python3[2006]:              |              imsi: 250997340491874
Oct 11 04:33:25 IQ138000 python3[2006]:              |             iccid: 8970199210429593744
Oct 11 04:33:25 IQ138000 python3[2006]:              |       operator id: 25099
Oct 11 04:33:25 IQ138000 python3[2006]:              |     operator name: Beeline
Oct 11 04:33:25 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:26 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:27 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:29 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:29 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:30 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:30 IQ138000 python3[2006]: Выполнение: mmcli -m wbc
Oct 11 04:33:30 IQ138000 ntpd[1659]: Soliciting pool server 91.206.16.3
Oct 11 04:33:30 IQ138000 python3[2006]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:33:30 IQ138000 python3[2006]:    --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:33:30 IQ138000 python3[2006]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:33:30 IQ138000 python3[2006]:            |                model: A7602E-H
Oct 11 04:33:30 IQ138000 python3[2006]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:33:30 IQ138000 python3[2006]:            |            supported: gsm-umts
Oct 11 04:33:30 IQ138000 python3[2006]:            |              current: gsm-umts
Oct 11 04:33:30 IQ138000 python3[2006]:            |         equipment id: 860803062234204
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   System   |               device: wbc
Oct 11 04:33:30 IQ138000 python3[2006]:            |              drivers: option, rndis_host
Oct 11 04:33:30 IQ138000 python3[2006]:            |               plugin: simtech
Oct 11 04:33:30 IQ138000 python3[2006]:            |         primary port: ttyUSB1
Oct 11 04:33:30 IQ138000 python3[2006]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:33:30 IQ138000 python3[2006]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:33:30 IQ138000 python3[2006]:            |                state: connected
Oct 11 04:33:30 IQ138000 python3[2006]:            |          power state: on
Oct 11 04:33:30 IQ138000 python3[2006]:            |          access tech: lte
Oct 11 04:33:30 IQ138000 python3[2006]:            |       signal quality: 93% (recent)
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:33:30 IQ138000 python3[2006]:            |              current: allowed: any; preferred: none
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   3GPP     |                 imei: 860803062234204
Oct 11 04:33:30 IQ138000 python3[2006]:            |          operator id: 25099
Oct 11 04:33:30 IQ138000 python3[2006]:            |        operator name: beeline
Oct 11 04:33:30 IQ138000 python3[2006]:            |         registration: home
Oct 11 04:33:30 IQ138000 python3[2006]:            | packet service state: attached
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:30 IQ138000 python3[2006]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:33:30 IQ138000 python3[2006]:            |                       slot 2: none
Oct 11 04:33:30 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:30 IQ138000 python3[2006]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:33:30 IQ138000 python3[2006]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:30 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:31 IQ138000 python3[2006]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:33:31 IQ138000 python3[2006]:    -------------------------------
Oct 11 04:33:31 IQ138000 python3[2006]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:31 IQ138000 python3[2006]:   -------------------------------
Oct 11 04:33:31 IQ138000 python3[2006]:   Properties |            active: yes
Oct 11 04:33:31 IQ138000 python3[2006]:              |              imsi: 250997340491874
Oct 11 04:33:31 IQ138000 python3[2006]:              |             iccid: 8970199210429593744
Oct 11 04:33:31 IQ138000 python3[2006]:              |       operator id: 25099
Oct 11 04:33:31 IQ138000 python3[2006]:              |     operator name: Beeline
Oct 11 04:33:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:33:31 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:31 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:31 IQ138000 ntpd[1659]: Soliciting pool server 151.0.2.53
Oct 11 04:33:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:32 IQ138000 ntpd[1659]: Soliciting pool server 185.211.244.47
Oct 11 04:33:32 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:33 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:33 IQ138000 ntpd[1659]: Soliciting pool server 212.113.99.6
Oct 11 04:33:33 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:33:34 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:34 IQ138000 ntpd[1659]: Soliciting pool server 2001:1bb0:e000:1e::85f
Oct 11 04:33:35 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:35 IQ138000 ntpd[1659]: Soliciting pool server 51.250.68.198
Oct 11 04:33:35 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 3 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:33:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:33:36 IQ138000 python3[2006]: Выполнение: mmcli -m wbc
Oct 11 04:33:36 IQ138000 python3[2006]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:33:36 IQ138000 python3[2006]:    --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:33:36 IQ138000 python3[2006]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:33:36 IQ138000 python3[2006]:            |                model: A7602E-H
Oct 11 04:33:36 IQ138000 python3[2006]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:33:36 IQ138000 python3[2006]:            |            supported: gsm-umts
Oct 11 04:33:36 IQ138000 python3[2006]:            |              current: gsm-umts
Oct 11 04:33:36 IQ138000 python3[2006]:            |         equipment id: 860803062234204
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   System   |               device: wbc
Oct 11 04:33:36 IQ138000 python3[2006]:            |              drivers: option, rndis_host
Oct 11 04:33:36 IQ138000 python3[2006]:            |               plugin: simtech
Oct 11 04:33:36 IQ138000 python3[2006]:            |         primary port: ttyUSB1
Oct 11 04:33:36 IQ138000 python3[2006]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:33:36 IQ138000 python3[2006]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:33:36 IQ138000 python3[2006]:            |                state: connected
Oct 11 04:33:36 IQ138000 python3[2006]:            |          power state: on
Oct 11 04:33:36 IQ138000 python3[2006]:            |          access tech: lte
Oct 11 04:33:36 IQ138000 python3[2006]:            |       signal quality: 93% (recent)
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:33:36 IQ138000 python3[2006]:            |              current: allowed: any; preferred: none
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   3GPP     |                 imei: 860803062234204
Oct 11 04:33:36 IQ138000 python3[2006]:            |          operator id: 25099
Oct 11 04:33:36 IQ138000 python3[2006]:            |        operator name: beeline
Oct 11 04:33:36 IQ138000 python3[2006]:            |         registration: home
Oct 11 04:33:36 IQ138000 python3[2006]:            | packet service state: attached
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:36 IQ138000 python3[2006]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:33:36 IQ138000 python3[2006]:            |                       slot 2: none
Oct 11 04:33:36 IQ138000 python3[2006]:   --------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:33:36 IQ138000 python3[2006]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:36 IQ138000 python3[2006]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:33:36 IQ138000 python3[2006]:    -------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:33:36 IQ138000 python3[2006]:   -------------------------------
Oct 11 04:33:36 IQ138000 python3[2006]:   Properties |            active: yes
Oct 11 04:33:36 IQ138000 python3[2006]:              |              imsi: 250997340491874
Oct 11 04:33:36 IQ138000 python3[2006]:              |             iccid: 8970199210429593744
Oct 11 04:33:36 IQ138000 python3[2006]:              |       operator id: 25099
Oct 11 04:33:36 IQ138000 python3[2006]:              |     operator name: Beeline
Oct 11 04:33:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:33:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:36 IQ138000 ntpd[1659]: Soliciting pool server 92.255.126.18
Oct 11 04:33:36 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 wb-mqtt-serial[1685]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:33:37 IQ138000 ntpd[1659]: Soliciting pool server 92.118.113.24
-- Boot 20ec7ee782df42a492b98ed364c4f125 --
Oct 11 04:37:55 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 04:37:55 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 04:37:55 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 04:37:55 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 04:37:55 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 04:37:55 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 04:37:55 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 04:37:55 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 04:37:55 IQ138000 kernel: Zone ranges:
Oct 11 04:37:55 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 04:37:55 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 04:37:55 IQ138000 kernel: Movable zone start for each node
Oct 11 04:37:55 IQ138000 kernel: Early memory node ranges
Oct 11 04:37:55 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:37:55 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:37:55 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 04:37:55 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 04:37:55 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 04:37:55 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 04:37:55 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 04:37:55 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 04:37:55 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 04:37:55 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 04:37:55 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 04:37:55 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 04:37:55 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 04:37:55 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 04:37:55 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 04:37:55 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 04:37:55 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 04:37:55 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 04:37:55 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 04:37:55 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 04:37:55 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 04:37:55 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 04:37:55 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 04:37:55 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 04:37:55 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 04:37:55 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 04:37:55 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 04:37:55 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 04:37:55 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 04:37:55 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 04:37:55 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 04:37:55 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 04:37:55 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 04:37:55 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 04:37:55 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 04:37:55 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 04:37:55 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 04:37:55 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 04:37:55 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 04:37:55 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 04:37:55 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 04:37:55 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 04:37:55 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 04:37:55 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 04:37:55 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 04:37:55 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 04:37:55 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 04:37:55 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 04:37:55 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 04:37:55 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 04:37:55 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 04:37:55 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 04:37:55 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 04:37:55 IQ138000 kernel: devtmpfs: initialized
Oct 11 04:37:55 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 04:37:55 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 04:37:55 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 04:37:55 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 04:37:55 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 04:37:55 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 04:37:55 IQ138000 kernel: No ATAGs?
Oct 11 04:37:55 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 04:37:55 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 04:37:55 IQ138000 kernel: SCSI subsystem initialized
Oct 11 04:37:55 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 04:37:55 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 04:37:55 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 04:37:55 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 04:37:55 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 04:37:55 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 04:37:55 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 04:37:55 IQ138000 kernel: PTP clock support registered
Oct 11 04:37:55 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 04:37:55 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 04:37:55 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 04:37:55 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 04:37:55 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:37:55 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 04:37:55 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 04:37:55 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 04:37:55 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 04:37:55 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 04:37:55 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 04:37:55 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 04:37:55 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 04:37:55 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 04:37:55 IQ138000 kernel: Key type id_resolver registered
Oct 11 04:37:55 IQ138000 kernel: Key type id_legacy registered
Oct 11 04:37:55 IQ138000 kernel: Key type asymmetric registered
Oct 11 04:37:55 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 04:37:55 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 04:37:55 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 04:37:55 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 04:37:55 IQ138000 kernel: io scheduler kyber registered
Oct 11 04:37:55 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:37:55 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 04:37:55 IQ138000 kernel: brd: module loaded
Oct 11 04:37:55 IQ138000 kernel: loop: module loaded
Oct 11 04:37:55 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 04:37:55 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:37:55 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:37:55 IQ138000 kernel: CAN device driver interface
Oct 11 04:37:55 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 04:37:55 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 04:37:55 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 04:37:55 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 04:37:55 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 04:37:55 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 04:37:55 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 04:37:55 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 04:37:55 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 04:37:55 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 04:37:55 IQ138000 kernel: i2c /dev entries driver
Oct 11 04:37:55 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 04:37:55 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 04:37:55 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 04:37:55 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 04:37:55 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 04:37:55 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 04:37:55 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 04:37:55 IQ138000 kernel: Segment Routing with IPv6
Oct 11 04:37:55 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 04:37:55 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 04:37:55 IQ138000 kernel: can: controller area network core
Oct 11 04:37:55 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 04:37:55 IQ138000 kernel: can: raw protocol
Oct 11 04:37:55 IQ138000 kernel: can: broadcast manager protocol
Oct 11 04:37:55 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 04:37:55 IQ138000 kernel: can: SAE J1939
Oct 11 04:37:55 IQ138000 kernel: Key type dns_resolver registered
Oct 11 04:37:55 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 04:37:55 IQ138000 kernel: registered taskstats version 1
Oct 11 04:37:55 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 04:37:55 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 04:37:55 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 04:37:55 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:37:55 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 04:37:55 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 04:37:55 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 04:37:55 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 04:37:55 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T04:37:51 UTC (1760157471)
Oct 11 04:37:55 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 04:37:55 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:37:55 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 04:37:55 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 04:37:55 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 04:37:55 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 04:37:55 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 04:37:55 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 04:37:55 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 04:37:55 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 04:37:55 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 04:37:55 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 04:37:55 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 04:37:55 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 04:37:55 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: random: fast init done
Oct 11 04:37:55 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 04:37:55 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 04:37:55 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 04:37:55 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 04:37:55 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 04:37:55 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 04:37:55 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 04:37:55 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 04:37:55 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 04:37:55 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:37:55 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:37:55 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 04:37:55 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:37:55 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 04:37:55 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 04:37:55 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 04:37:55 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 04:37:55 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 04:37:55 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 04:37:55 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 04:37:55 IQ138000 kernel: libphy: stmmac: probed
Oct 11 04:37:55 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:37:55 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 04:37:55 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:37:55 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 04:37:55 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 04:37:55 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:37:55 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 04:37:55 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 04:37:55 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 04:37:55 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 04:37:55 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 04:37:55 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 04:37:55 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:37:55 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 04:37:55 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 04:37:55 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 04:37:55 IQ138000 kernel: of_cfs_init
Oct 11 04:37:55 IQ138000 kernel: of_cfs_init: OK
Oct 11 04:37:55 IQ138000 kernel: ALSA device list:
Oct 11 04:37:55 IQ138000 kernel:   No soundcards found.
Oct 11 04:37:55 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 04:37:55 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 04:37:55 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 04:37:55 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 04:37:55 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 04:37:55 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 04:37:55 IQ138000 kernel: devtmpfs: mounted
Oct 11 04:37:55 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 04:37:55 IQ138000 kernel: Run /sbin/init as init process
Oct 11 04:37:55 IQ138000 kernel:   with arguments:
Oct 11 04:37:55 IQ138000 kernel:     /sbin/init
Oct 11 04:37:55 IQ138000 kernel:   with environment:
Oct 11 04:37:55 IQ138000 kernel:     HOME=/
Oct 11 04:37:55 IQ138000 kernel:     TERM=linux
Oct 11 04:37:55 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 04:37:55 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 04:37:55 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 04:37:55 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 04:37:55 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 04:37:55 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:37:55 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 04:37:55 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:37:55 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 04:37:55 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:37:55 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 04:37:55 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 04:37:55 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 04:37:55 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 04:37:55 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 04:37:55 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:37:55 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 04:37:55 IQ138000 systemd[1]: Reached target Paths.
Oct 11 04:37:55 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 04:37:55 IQ138000 systemd[1]: Reached target Slices.
Oct 11 04:37:55 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 04:37:55 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 04:37:55 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 04:37:55 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 04:37:55 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 04:37:55 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 04:37:55 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 04:37:55 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:37:55 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 04:37:55 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 04:37:55 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 04:37:55 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 04:37:55 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 04:37:55 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:37:55 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 04:37:55 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 04:37:55 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 04:37:55 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 04:37:55 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 04:37:55 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 04:37:55 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 04:37:55 IQ138000 systemd-journald[138]: Journal started
Oct 11 04:37:55 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 04:37:55 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 04:37:55 IQ138000 systemd[1]: Started Journal Service.
Oct 11 04:37:55 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 04:37:55 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 04:37:55 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 04:37:55 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 04:37:55 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 04:37:55 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 04:37:56 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:37:56 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:37:56 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 04:37:56 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 04:37:56 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 04:37:56 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 04:37:56 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 04:37:56 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 04:37:56 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 04:37:56 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 04:37:56 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 04:37:56 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 04:37:56 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 04:37:56 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 04:37:56 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 04:37:56 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 04:37:56 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 04:37:57 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 04:37:57 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 04:37:57 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 04:37:57 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 04:37:57 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 04:37:57 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 04:37:57 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 04:37:57 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 04:37:57 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 04:37:57 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 04:37:57 IQ138000 systemd-udevd[161]: eth1: Failed to query device driver: Device or resource busy
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 04:37:57 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 04:37:57 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 04:37:57 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 04:37:57 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 04:37:57 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 04:37:57 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 04:37:57 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 04:37:57 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 04:37:57 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 04:37:57 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 04:37:57 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 04:37:58 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 04:37:58 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 04:37:58 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 04:37:58 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 04:37:58 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 04:37:58 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 04:37:58 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 04:37:58 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 04:37:58 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 04:37:58 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 04:37:58 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 04:37:58 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:37:58 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:37:58 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:37:58 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 04:37:58 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 04:37:58 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 04:37:58 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:37:58 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:37:58 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 04:37:58 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:37:58 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:37:58 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 04:37:58 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 04:37:58 IQ138000 systemd[1]: Reached target Swap.
Oct 11 04:37:58 IQ138000 systemd-fsck[212]: data: recovering journal
Oct 11 04:37:58 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 04:37:58 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 04:37:58 IQ138000 systemd-fsck[212]: data: clean, 16450/328656 files, 373369/1313536 blocks
Oct 11 04:37:58 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 04:37:58 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 04:37:58 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 04:37:58 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 04:37:58 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 04:37:58 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 04:37:58 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 04:37:58 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 04:37:58 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 04:37:59 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.691ms for 461 entries.
Oct 11 04:37:59 IQ138000 systemd-journald[138]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 504.4M, max 496.6M, 0B free.
Oct 11 04:37:59 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 04:37:59 IQ138000 wb-configs-early[219]: Checking symlinks to /mnt/data
Oct 11 04:37:59 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 04:37:59 IQ138000 kernel: random: crng init done
Oct 11 04:37:59 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 04:37:59 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 04:37:59 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 04:37:59 IQ138000 wb-configs-early[219]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 04:37:59 IQ138000 wb-configs-early[219]: Setting ownership www-data to /mnt/data/uploads
Oct 11 04:37:59 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 04:37:59 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 04:37:59 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 04:38:00 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 04:38:00 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 04:38:00 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 04:38:00 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 04:38:00 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 04:38:00 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 04:38:00 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 04:38:00 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 04:38:00 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 04:38:00 IQ138000 systemd[1]: Reached target Timers.
Oct 11 04:38:00 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 04:38:00 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 04:38:00 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 04:38:00 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 04:38:00 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 04:38:00 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 04:38:00 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 04:38:00 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 04:38:00 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:38:00 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 04:38:00 IQ138000 cron[296]: (CRON) INFO (pidfile fd = 3)
Oct 11 04:38:00 IQ138000 cron[296]: (CRON) INFO (Running @reboot jobs)
Oct 11 04:38:00 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 04:38:00 IQ138000 bluetoothd[293]: Bluetooth daemon 5.55
Oct 11 04:38:00 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 04:38:00 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 04:38:00 IQ138000 bluetoothd[293]: Starting SDP server
Oct 11 04:38:00 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 04:38:00 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:38:00 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 04:38:00 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 04:38:00 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 04:38:00 IQ138000 bluetoothd[293]: Bluetooth management interface 1.18 initialized
Oct 11 04:38:00 IQ138000 dbus-daemon[297]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=293 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 04:38:00 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 04:38:00 IQ138000 bluetoothd[293]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 04:38:00 IQ138000 bluetoothd[293]: sap-server: Operation not permitted (1)
Oct 11 04:38:00 IQ138000 config-manager[294]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:38:00 IQ138000 config-manager[294]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:38:00 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 04:38:00 IQ138000 migrate.sh[322]: Error: No such file or directory
Oct 11 04:38:00 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 04:38:00 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 04:38:01 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:38:01 IQ138000 migrate.sh[327]: Error: No such file or directory
Oct 11 04:38:01 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:38:01 IQ138000 migrate.sh[338]: Error: No such file or directory
Oct 11 04:38:01 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 04:38:01 IQ138000 reverse-ssh.sh[344]: Error: No such file or directory
Oct 11 04:38:01 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 04:38:01 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:38:01 IQ138000 migrate.sh[353]: Error: No such file or directory
Oct 11 04:38:01 IQ138000 systemd[1]: Started watch config files.
Oct 11 04:38:01 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 04:38:01 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 04:38:01 IQ138000 migrate.sh[362]: Error: No such file or directory
Oct 11 04:38:01 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 04:38:01 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 04:38:01 IQ138000 rules-preprocessor[340]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:38:01 IQ138000 rules-preprocessor[340]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:38:01 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 04:38:01 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 04:38:01 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Successfully dropped root privileges.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: avahi-daemon 0.8 starting up.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Successfully called chroot().
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Successfully dropped remaining capabilities.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: No service file found in /etc/avahi/services.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv6 for mDNS.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv4 for mDNS.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Network interface enumeration completed.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Registering new address record for ::1 on lo.*.
Oct 11 04:38:01 IQ138000 avahi-daemon[370]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 04:38:01 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:38:01 IQ138000 wb-watch-configs[384]: Watched dirs: /etc /etc/network
Oct 11 04:38:01 IQ138000 systemd-logind[352]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 04:38:01 IQ138000 systemd-logind[352]: New seat seat0.
Oct 11 04:38:01 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:38:01 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 04:38:01 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 04:38:01 IQ138000 wpa_supplicant[382]: Successfully initialized wpa_supplicant
Oct 11 04:38:01 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 04:38:01 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 04:38:01 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:01 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 04:38:01 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 04:38:01 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 04:38:01 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:01 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:38:01 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:38:01 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:38:01 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 04:38:01 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 04:38:01 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:01 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:38:01 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 04:38:01 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 04:38:01 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 04:38:02 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:38:02 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:38:02 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.1032] NetworkManager (version 1.42.4) is starting... (boot:20ec7ee7-82df-42a4-92b9-8ed364c4f125)
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.1036] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.1163] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 04:38:02 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 04:38:02 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.1661] manager[0x746900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 04:38:02 IQ138000 systemd[1]: Started Network Manager.
Oct 11 04:38:02 IQ138000 avahi-daemon[370]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1646087564.
Oct 11 04:38:02 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 04:38:02 IQ138000 monit[323]: Starting daemon monitor: monit.
Oct 11 04:38:02 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 04:38:02 IQ138000 systemd[1]: Started User Login Management.
Oct 11 04:38:02 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 04:38:02 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 04:38:02 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 04:38:02 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 04:38:02 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 04:38:02 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 04:38:02 IQ138000 ModemManager[477]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 04:38:02 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 04:38:02 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.8876] hostname: hostname: using hostnamed
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.8880] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.8918] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9086] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9107] manager[0x746900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9109] manager[0x746900]: rfkill: WWAN hardware radio set enabled
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9418] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9526] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9557] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9856] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 04:38:02 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 04:38:02 IQ138000 NetworkManager[403]: <info>  [1760157482.9965] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0005] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0011] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0060] manager: Networking is enabled by state file
Oct 11 04:38:03 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0250] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0263] settings: Loaded settings plugin: keyfile (internal)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0273] ifupdown: management mode: unmanaged
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0285] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.0298] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 04:38:03 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:38:03 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.1170] dhcp: init: Using DHCP client 'internal'
Oct 11 04:38:03 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.1194] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.1297] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.1340] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.1871] device (lo): Activation: starting connection 'lo' (3f778925-de44-4cd7-ab49-513859d97f12)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.1983] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.2038] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.5728] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.5828] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.5864] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.5896] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:03 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 04:38:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 04:38:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 04:38:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 04:38:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 04:38:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.7992] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.8055] device (wlan0): driver supports Access Point (AP) mode
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.8127] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 04:38:03 IQ138000 NetworkManager[403]: <info>  [1760157483.8160] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6235] device (wlan1): driver supports Access Point (AP) mode
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6298] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6338] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6822] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6843] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6858] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.6905] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 wpa_supplicant[382]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.7460] modem-manager: ModemManager available
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.7474] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.7494] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 04:38:04 IQ138000 NetworkManager[403]: <info>  [1760157484.7539] device (lo): Activation: successful, device activated.
Oct 11 04:38:04 IQ138000 wpa_supplicant[382]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0253] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0262] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0285] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0306] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0383] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0389] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0411] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0431] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0480] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0524] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0545] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:38:05 IQ138000 NetworkManager[403]: <info>  [1760157485.0635] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:05 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 04:38:05 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 04:38:05 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 04:38:08 IQ138000 init.sh[1318]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 04:38:08 IQ138000 init.sh[1333]: In file included from -:16:
Oct 11 04:38:08 IQ138000 init.sh[1333]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:08 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:38:08 IQ138000 init.sh[1318]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 04:38:09 IQ138000 init.sh[1318]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 04:38:09 IQ138000 init.sh[1393]: In file included from -:11:
Oct 11 04:38:09 IQ138000 init.sh[1393]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:09 IQ138000 init.sh[1318]: ...
Oct 11 04:38:09 IQ138000 init.sh[1408]: In file included from -:11:
Oct 11 04:38:09 IQ138000 init.sh[1408]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:09 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 04:38:09 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 04:38:09 IQ138000 init.sh[1318]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 04:38:09 IQ138000 init.sh[1428]: In file included from -:24:
Oct 11 04:38:09 IQ138000 init.sh[1428]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:10 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:38:10 IQ138000 init.sh[1318]: ...
Oct 11 04:38:10 IQ138000 init.sh[1443]: In file included from -:24:
Oct 11 04:38:10 IQ138000 init.sh[1443]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:10 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 04:38:10 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 04:38:10 IQ138000 init.sh[1318]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 04:38:10 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 04:38:10 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:10 IQ138000 init.sh[1318]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 04:38:10 IQ138000 init.sh[1489]: In file included from -:11:
Oct 11 04:38:10 IQ138000 init.sh[1489]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:38:11 IQ138000 init.sh[1318]: ...
Oct 11 04:38:11 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 04:38:11 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 04:38:11 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 04:38:11 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 04:38:11 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 04:38:11 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 04:38:11 IQ138000 systemd[1]: Reached target Network.
Oct 11 04:38:11 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 04:38:11 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 04:38:11 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:38:11 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:38:11 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 04:38:11 IQ138000 lsyncd[1609]: 04:38:11 Normal: --- Startup ---
Oct 11 04:38:11 IQ138000 lsyncd[1609]: 04:38:11 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:38:11 IQ138000 lsyncd[1609]: iq_network_manager/iq_network_manager.log
Oct 11 04:38:11 IQ138000 lsyncd[1609]: journal
Oct 11 04:38:11 IQ138000 lsyncd[1609]: messages
Oct 11 04:38:11 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 04:38:11 IQ138000 knxd[1605]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:38:11 IQ138000 knxd[1605]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:38:11 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:38:11 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 04:38:11 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 04:38:11 IQ138000 lsyncd[1624]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:38:11 IQ138000 lsyncd[1617]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:38:11 IQ138000 lsyncd[1617]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:38:11 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 04:38:11 IQ138000 lsyncd[1609]: 04:38:11 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:38:11 IQ138000 persist_meter_data.sh[1638]: Error: No such file or directory
Oct 11 04:38:12 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 04:38:12 IQ138000 ntpd[1619]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 04:38:12 IQ138000 ntpd[1619]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 04:38:12 IQ138000 ntpd[1619]: ----------------------------------------------------
Oct 11 04:38:12 IQ138000 ntpd[1619]: ntp-4 is maintained by Network Time Foundation,
Oct 11 04:38:12 IQ138000 ntpd[1619]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 04:38:12 IQ138000 ntpd[1619]: corporation.  Support and training for ntp-4 are
Oct 11 04:38:12 IQ138000 ntpd[1619]: available at https://www.nwtime.org/support
Oct 11 04:38:12 IQ138000 ntpd[1619]: ----------------------------------------------------
Oct 11 04:38:12 IQ138000 ntpd[1645]: proto: precision = 1.000 usec (-20)
Oct 11 04:38:12 IQ138000 ntpd[1645]: basedate set to 2020-09-11
Oct 11 04:38:12 IQ138000 ntpd[1645]: gps base set to 2020-09-13 (week 2123)
Oct 11 04:38:12 IQ138000 ntpd[1645]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 04:38:12 IQ138000 ntpd[1645]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 04:38:12 IQ138000 ntpd[1645]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 04:38:12 IQ138000 ntpd[1645]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 04:38:12 IQ138000 ntpd[1645]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 04:38:12 IQ138000 ntpd[1645]: Listen normally on 3 lo [::1]:123
Oct 11 04:38:12 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 04:38:12 IQ138000 ntpd[1645]: Listening on routing socket on fd #20 for interface updates
Oct 11 04:38:12 IQ138000 wb-knxd-config.sh[1517]: No /dev/ttyKNX found, disabling level2
Oct 11 04:38:12 IQ138000 wb-knxd-config.sh[1517]: Restart knxd
Oct 11 04:38:12 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 04:38:12 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 04:38:12 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 04:38:12 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:38:12 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:38:12 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 04:38:12 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:38:12 IQ138000 wb-mqtt-w1[1678]: MQTT broker localhost:1883
Oct 11 04:38:12 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:12 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:38:12 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:38:12 IQ138000 wb-mqtt-w1[1678]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 04:38:12 IQ138000 wb-mqtt-w1[1678]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 04:38:12 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 04:38:12 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 04:38:12 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:38:12 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 04:38:12 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 04:38:12 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:12 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:38:12 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:38:12 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:38:12 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 04:38:12 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:12 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 04:38:12 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 04:38:12 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:38:12 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 04:38:12 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 04:38:12 IQ138000 wb-connection-manager[1506]: Connection LegacyWiFi not found, skipping
Oct 11 04:38:12 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 04:38:12 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 04:38:12 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 04:38:12 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 04:38:12 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 04:38:12 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 04:38:12 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 04:38:12 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 04:38:12 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 04:38:13 IQ138000 ntpd[1645]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:38:13 IQ138000 vnstatd[1653]: Info: vnStat daemon 2.6 started. (pid:1653 uid:110 gid:117 64-bit)
Oct 11 04:38:13 IQ138000 vnstatd[1653]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 04:38:13 IQ138000 vnstatd[1653]: Info: Interface "ppp0" disabled.
Oct 11 04:38:13 IQ138000 sshd[1717]: Server listening on 0.0.0.0 port 22.
Oct 11 04:38:13 IQ138000 sshd[1717]: Server listening on :: port 22.
Oct 11 04:38:13 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 04:38:13 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 04:38:13 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:13 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 04:38:13 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 04:38:13 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 04:38:13 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:38:13 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:38:13 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 04:38:13 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 04:38:13 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 04:38:13 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 04:38:13 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 04:38:13 IQ138000 reverse-ssh.sh[1834]: Error: No such file or directory
Oct 11 04:38:13 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:38:13 IQ138000 NetworkManager[403]: <error> [1760157493.7392] audit: failed to open auditd socket: Protocol not supported
Oct 11 04:38:13 IQ138000 NetworkManager[403]: <info>  [1760157493.7395] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1506 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:38:13 IQ138000 wb-connection-manager[1506]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 04:38:13 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:38:13 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:13 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:38:13 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 04:38:13 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:13 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:38:13 IQ138000 knxd[1854]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:38:13 IQ138000 knxd[1854]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:38:13 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:38:14 IQ138000 ntpd[1645]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:38:14 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:14 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:38:14 IQ138000 wb-adjust-systime[1829]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 04:38:14 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Warning: Error resolving bridge address: Name or service not known.
Oct 11 04:38:14 IQ138000 wb-adjust-systime[1829]: Drift file is valid (was recently edited)
Oct 11 04:38:14 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 04:38:14 IQ138000 mosquitto[1875]: 1760157494: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 04:38:14 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 04:38:14 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4267] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4273] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1506 uid=0 result="success"
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4279] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4300] manager: NetworkManager state is now CONNECTING
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4340] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4714] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.4716] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:14 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.5701] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.5894] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:14 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.6000] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.6007] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.6009] Config: added 'scan_ssid' value '1'
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.6010] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.6012] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:38:14 IQ138000 NetworkManager[403]: <info>  [1760157494.6013] Config: added 'psk' value '<hidden>'
Oct 11 04:38:14 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 04:38:14 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 04:38:14 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 04:38:14 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 04:38:14 IQ138000 wb-mqtt-db[1976]: MQTT broker localhost:1883
Oct 11 04:38:14 IQ138000 wb-mqtt-db[1976]: Config file /etc/wb-mqtt-db.conf
Oct 11 04:38:14 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 04:38:15 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:15 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:15 IQ138000 ntpd[1645]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:38:15 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] Creating tables if necessary
Oct 11 04:38:15 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] Create indices if necessary
Oct 11 04:38:15 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] Analyzing data table
Oct 11 04:38:15 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 04:38:15 IQ138000 wb-mqtt-knx[1998]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:15 IQ138000 wb-mqtt-knx[1998]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:15 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 04:38:15 IQ138000 systemd[1]: Started metrics sender.
Oct 11 04:38:15 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 04:38:15 IQ138000 wb-mqtt-logs[2003]: MQTT broker localhost:1883
Oct 11 04:38:15 IQ138000 wb-mqtt-logs[2003]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:15 IQ138000 wb-mqtt-logs[2003]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:15 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 04:38:15 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 04:38:15 IQ138000 wb-mqtt-confed[1967]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:38:15 IQ138000 wb-mqtt-confed[1967]: INFO: [wbgo_mqtt] confed-IQ138000-1967: MQTT connection established
Oct 11 04:38:15 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:38:16 IQ138000 ntpd[1645]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:16 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.655s CPU time.
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 04:38:16 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:38:16 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [gpio driver] Started
Oct 11 04:38:16 IQ138000 wb-mqtt-gpio[1839]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:38:16 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 04:38:16 IQ138000 wb-mqtt-iec104[1983]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 04:38:16 IQ138000 NetworkManager[403]: <info>  [1760157496.8544] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:38:16 IQ138000 NetworkManager[403]: <info>  [1760157496.8546] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:38:16 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 04:38:17 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 04:38:17 IQ138000 wb-mqtt-mbgate[2011]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 04:38:17 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 04:38:17 IQ138000 wb-mqtt-opcua[2174]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 04:38:17 IQ138000 wb-mqtt-iec104[2191]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 04:38:17 IQ138000 wb-mqtt-logs[2003]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:17 IQ138000 wb-mqtt-logs[2003]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:17 IQ138000 wb-mqtt-logs[2003]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:17 IQ138000 wb-mqtt-logs[2003]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:38:17 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:17 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 04:38:17 IQ138000 wb-mqtt-opcua[2174]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 04:38:17 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:38:17 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 04:38:17 IQ138000 wb-mqtt-iec104[2191]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 04:38:17 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 04:38:18 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 04:38:18 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 04:38:18 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 04:38:18 IQ138000 wb-mqtt-knx[1998]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:18 IQ138000 wb-mqtt-knx[1998]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:18 IQ138000 wb-mqtt-knx[1998]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:18 IQ138000 wb-mqtt-knx[1998]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:38:18 IQ138000 wb-mqtt-knx[1998]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 04:38:20 IQ138000 python3[1945]: No data file found at /tmp/network_status_cache.json
Oct 11 04:38:20 IQ138000 wpa_supplicant[382]: wlan0: Reject scan trigger since one is already pending
Oct 11 04:38:20 IQ138000 python3[1945]: Connecting to MQTT
Oct 11 04:38:20 IQ138000 python3[1945]: Connected to MQTT
Oct 11 04:38:20 IQ138000 python3[1945]: Connection returned result: Connection Accepted.
Oct 11 04:38:21 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:21 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:21 IQ138000 wb-device-manager[1955]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 04:38:21 IQ138000 wb-device-manager[1955]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 04:38:22 IQ138000 dbus-daemon[297]: [system] Connection :1.17 (uid=0 pid=2034 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New virtual device lo 3f778925-de44-4cd7-ab49-513859d97f12 /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:38:22 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New active connection lo 3f778925-de44-4cd7-ab49-513859d97f12 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 04:38:23 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 04:38:23 IQ138000 kernel: dc5ldo: disabling
Oct 11 04:38:23 IQ138000 kernel: dldo4: disabling
Oct 11 04:38:23 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 04:38:23 IQ138000 kernel: vcc-sd: disabling
Oct 11 04:38:24 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:38:24 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:38:24 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:38:24 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:24 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:38:24 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:38:24 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 04:38:24 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 04:38:24 IQ138000 knxd[3076]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:38:24 IQ138000 knxd[3076]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:38:24 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:38:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: MQTT broker localhost:1883
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] ADC worker thread is started
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:38:24 IQ138000 wb-mqtt-adc[3087]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 04:38:24 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-confed[1967]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 04:38:25 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 04:38:26 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] DB initialization is done
Oct 11 04:38:26 IQ138000 wb-gsm[3322]: main: Called from pid 1 (systemd)
Oct 11 04:38:26 IQ138000 wb-gsm[3361]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 04:38:26 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 04:38:26 IQ138000 wb-gsm[3448]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:38:26 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 04:38:26 IQ138000 wb-usb-otg-start.sh[3452]: : wb-usb-otg-start
Oct 11 04:38:26 IQ138000 wb-usb-otg-start.sh[3452]: main: setup_device()
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 04:38:27 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 04:38:27 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 04:38:27 IQ138000 kernel: using random self ethernet address
Oct 11 04:38:27 IQ138000 kernel: using random host ethernet address
Oct 11 04:38:27 IQ138000 wb-usb-otg-start.sh[3452]: main: enabling profile rndis
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 04:38:27 IQ138000 wb-gsm[3489]: should_enable: Should enable GSM modem
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 04:38:27 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 04:38:27 IQ138000 NetworkManager[403]: <info>  [1760157507.5501] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 04:38:27 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 04:38:27 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 04:38:27 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 04:38:27 IQ138000 systemd-udevd[3433]: Using default interface naming scheme 'v247'.
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 04:38:27 IQ138000 NetworkManager[403]: <info>  [1760157507.7522] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 04:38:27 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: DB logger started, go to main loop
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 04:38:28 IQ138000 wb-gsm[3578]: main: Called from pid 3494 (wb-gsm-mm)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 04:38:28 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 04:38:28 IQ138000 wb-gsm[3591]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 04:38:28 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 04:38:28 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 04:38:29 IQ138000 wb-gsm[3614]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:38:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:38:30 IQ138000 npm[1687]: > zigbee2mqtt@2.1.1 start
Oct 11 04:38:30 IQ138000 npm[1687]: > node index.js
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:38:30 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:38:30 IQ138000 python3[1945]: Выполнение: service wb-connection-manager stop
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 04:38:30 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 04:38:31 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-gsm[3995]: mm_off: Modem is already OFF
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 04:38:32 IQ138000 npm[3727]: Starting Zigbee2MQTT without watchdog.
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:38:32 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:38:33 IQ138000 wb-gsm[4066]: main: Called from pid 3494 (wb-gsm-mm)
Oct 11 04:38:33 IQ138000 wb-gsm[4077]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:38:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:33 IQ138000 wb-gsm[4100]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:38:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 4 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:38:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:38:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 04:38:38 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:38 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:38:38 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:38 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:38 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:38 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:38 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:38:38 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 04:38:38 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:38:38 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:38:38 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:38:38 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:38:38 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:38:38 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:38:38 IQ138000 knxd[4500]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:38:38 IQ138000 knxd[4500]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: MQTT broker localhost:1883
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:38:38 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: w1 thread Started
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:38:38 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:38:38 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:38 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 04:38:38 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 04:38:38 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 04:38:38 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.165s CPU time.
Oct 11 04:38:38 IQ138000 python3[1945]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 04:38:38 IQ138000 python3[1945]:  
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <warn>  [1760157519.5269] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <info>  [1760157519.5271] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <info>  [1760157519.5291] manager: NetworkManager state is now DISCONNECTED
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <warn>  [1760157519.5313] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <info>  [1760157519.5331] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:38:39 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <info>  [1760157519.5716] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:38:39 IQ138000 NetworkManager[403]: <info>  [1760157519.5727] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:40 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:38:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:38:40 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 04:38:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:38:40 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:38:40 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:38:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 8974 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:38:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:38:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:38:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:38:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:38:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:38:43 IQ138000 NetworkManager[403]: <info>  [1760157523.0169] manager: startup complete
Oct 11 04:38:43 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:38:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:38:43 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 04:38:43 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:38:43 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 04:38:43 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 04:38:43 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 04:38:43 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:38:43 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:38:43 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:38:43 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:38:43 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:38:43 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:38:43 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 04:38:43 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 04:38:43 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 04:38:43 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 04:38:43 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:38:43 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 04:38:43 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:38:43 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 04:38:43 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:38:43 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:38:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:43 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 04:38:43 IQ138000 python3[1945]: Выполнение: mmcli -m wbc
Oct 11 04:38:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:38:43 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:43 IQ138000 wb-rules[4553]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:38:43 IQ138000 wb-rules[4553]: INFO: driver is created
Oct 11 04:38:43 IQ138000 wb-rules[4553]: INFO: [wbgo_mqtt] rules-IQ138000-4553: MQTT connection established
Oct 11 04:38:43 IQ138000 wb-rules[4553]: INFO: driver loop is started
Oct 11 04:38:43 IQ138000 wb-rules[4553]: INFO: wait for driver to become ready
Oct 11 04:38:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:44 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 04:38:44 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 4 input(s) @ 12836 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:38:44 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:44 IQ138000 watchdog[4638]: starting daemon (5.16):
Oct 11 04:38:44 IQ138000 watchdog[4638]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 04:38:44 IQ138000 watchdog[4638]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 04:38:44 IQ138000 watchdog[4638]:  ping: no machine to check
Oct 11 04:38:44 IQ138000 watchdog[4638]:  file: no file to check
Oct 11 04:38:44 IQ138000 watchdog[4638]:  pidfile: /var/run/sshd.pid
Oct 11 04:38:44 IQ138000 watchdog[4638]:  interface: no interface to check
Oct 11 04:38:44 IQ138000 watchdog[4638]:  temperature: no sensors to check
Oct 11 04:38:44 IQ138000 watchdog[4638]:  no test binary files
Oct 11 04:38:44 IQ138000 watchdog[4638]:  no repair binary files
Oct 11 04:38:44 IQ138000 watchdog[4638]:  error retry time-out = 30 seconds
Oct 11 04:38:44 IQ138000 watchdog[4638]:  repair attempts = 1
Oct 11 04:38:44 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 04:38:44 IQ138000 watchdog[4638]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 04:38:44 IQ138000 watchdog[4638]: watchdog now set to 120 seconds
Oct 11 04:38:44 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 04:38:44 IQ138000 watchdog[4638]: hardware watchdog identity: WBEC WDT
Oct 11 04:38:44 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 04:38:44 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 04:38:44 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 04:38:44 IQ138000 systemd[1]: Startup finished in 3.797s (kernel) + 51.429s (userspace) = 55.226s.
Oct 11 04:38:44 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 5 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:45 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:46 IQ138000 wb-rules[4553]: INFO: driver is ready
Oct 11 04:38:46 IQ138000 wb-rules[4553]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 04:38:46 IQ138000 wb-rules[4553]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4553: MQTT connection established
Oct 11 04:38:46 IQ138000 wb-rules[4553]: INFO: [engine] Starting main loop
Oct 11 04:38:46 IQ138000 wb-rules[4553]: INFO: the engine is ready
Oct 11 04:38:46 IQ138000 wb-rules[4553]: INFO: [engine] Starting sync loop
Oct 11 04:38:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:46 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 04:38:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:46 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 04:38:46 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 04:38:46 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 04:38:46 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 1e:a0:88:48:b1:75
Oct 11 04:38:46 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 04:38:46 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:47 IQ138000 NetworkManager[403]: <info>  [1760157527.0482] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 04:38:47 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 04:38:47 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:47 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 04:38:47 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 04:38:47 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 04:38:47 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 04:38:47 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 systemd-udevd[4806]: Using default interface naming scheme 'v247'.
Oct 11 04:38:47 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:47 IQ138000 systemd-udevd[4806]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-rules[4553]: WARNING: [rule warning] DAC: no config file
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 04:38:48 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:38:48 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:48 IQ138000 knxd[4993]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:38:48 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:38:48 IQ138000 knxd[4993]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:38:48 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:48 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:38:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:49 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 04:38:49 IQ138000 wb-gsm[5010]: mm_on: Waiting for modem to start
Oct 11 04:38:49 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 04:38:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:38:50 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:38:50 IQ138000 wb-rules[4553]: INFO: all rule files are loaded
Oct 11 04:38:50 IQ138000 python3[1945]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:50 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:51 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 npm[3727]: [2025-10-11 04:38:52] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 npm[3727]: [2025-10-11 04:38:52] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 04:38:52 IQ138000 npm[3727]: [2025-10-11 04:38:52] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 04:38:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:38:53 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:38:53 IQ138000 npm[3727]: [2025-10-11 04:38:53] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 04:38:53 IQ138000 npm[3727]: [2025-10-11 04:38:53] info:         zh:zstack:znp: Serialport opened
Oct 11 04:38:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:54 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:55 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:38:55 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:38:56 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:38:57 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: Currently 4 devices are joined.
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 04:38:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m: Connected to MQTT server
Oct 11 04:38:57 IQ138000 npm[3727]: [2025-10-11 04:38:57] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 04:38:57 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 07:38:57.896+00:00
Oct 11 04:38:57 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 04:38:57 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T07:38:57.896Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:57 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157717921,"cmd_timestamp_ms":1760157537921,"source":"schedule"}
Oct 11 04:38:57 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157717921,"cmd_timestamp_ms":1760157537921,"source":"schedule"}
Oct 11 04:38:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 07:38:58.172+00:00
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T07:38:58.172Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157718201,"cmd_timestamp_ms":1760157538201,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760157718201,"cmd_timestamp_ms":1760157538201,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:38:58 IQ138000 wb-rules[4553]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:38:58 IQ138000 wb-rules[4553]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:38:58 IQ138000 wb-rules[4553]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:38:58 IQ138000 npm[3727]: [2025-10-11 04:38:58] info:         z2m: Started frontend on port 8282
Oct 11 04:38:58 IQ138000 npm[3727]: [2025-10-11 04:38:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 07:38:58.316+00:00
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 04:38:58 IQ138000 npm[3727]: [2025-10-11 04:38:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T07:38:58.316Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:58 IQ138000 npm[3727]: [2025-10-11 04:38:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157718334,"cmd_timestamp_ms":1760157538334,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157718334,"cmd_timestamp_ms":1760157538334,"source":"schedule"}
Oct 11 04:38:58 IQ138000 npm[3727]: [2025-10-11 04:38:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 04:38:58 IQ138000 npm[3727]: [2025-10-11 04:38:58] info:         z2m: Zigbee2MQTT started!
Oct 11 04:38:58 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 07:38:58.605+00:00
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T07:38:58.605Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157718623,"cmd_timestamp_ms":1760157538623,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157718623,"cmd_timestamp_ms":1760157538623,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 07:38:58.777+00:00
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T07:38:58.777Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157718794,"cmd_timestamp_ms":1760157538794,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157718794,"cmd_timestamp_ms":1760157538794,"source":"schedule"}
Oct 11 04:38:58 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 07:38:59.011+00:00
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T07:38:59.011Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:59 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 04:38:59 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:38:59 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157719030,"cmd_timestamp_ms":1760157539030,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157719030,"cmd_timestamp_ms":1760157539030,"source":"schedule"}
Oct 11 04:38:59 IQ138000 knxd[5168]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:38:59 IQ138000 knxd[5168]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:38:59 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:38:59 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:38:59 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 07:38:59.214+00:00
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T07:38:59.214Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157719226,"cmd_timestamp_ms":1760157539226,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157719226,"cmd_timestamp_ms":1760157539226,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 07:38:59.361+00:00
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T07:38:59.361Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157719373,"cmd_timestamp_ms":1760157539373,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760157719373,"cmd_timestamp_ms":1760157539373,"source":"schedule"}
Oct 11 04:38:59 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 07:38:59.758+00:00
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T07:38:59.758Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157719771,"cmd_timestamp_ms":1760157539771,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157719771,"cmd_timestamp_ms":1760157539771,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 07:38:59.924+00:00
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T07:38:59.924Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157719938,"cmd_timestamp_ms":1760157539938,"source":"schedule"}
Oct 11 04:38:59 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157719938,"cmd_timestamp_ms":1760157539938,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-watchdog[5211]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 07:39:00.072+00:00
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T07:39:00.072Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157720085,"cmd_timestamp_ms":1760157540085,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760157720085,"cmd_timestamp_ms":1760157540085,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 07:39:00.214+00:00
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T07:39:00.214Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760157720224,"cmd_timestamp_ms":1760157540224,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760157720224,"cmd_timestamp_ms":1760157540224,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 07:39:00.346+00:00
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T07:39:00.346Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760157720358,"cmd_timestamp_ms":1760157540358,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760157720358,"cmd_timestamp_ms":1760157540358,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 07:39:00.505+00:00
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T07:39:00.505Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:39:00 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157720527,"cmd_timestamp_ms":1760157540527,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157720527,"cmd_timestamp_ms":1760157540527,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 07:39:00.652+00:00
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T07:39:00.652Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157720661,"cmd_timestamp_ms":1760157540661,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760157720661,"cmd_timestamp_ms":1760157540661,"source":"schedule"}
Oct 11 04:39:00 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:39:00 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:39:00 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 04:39:00 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 04:39:01 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 04:39:01 IQ138000 wb-rules[4553]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 04:39:01 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:39:01 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 04:39:01 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:39:01 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 04:39:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:02 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:39:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:03 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:04 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:04 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:05 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:06 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:07 IQ138000 ModemManager[477]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 04:39:07 IQ138000 ModemManager[477]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 04:39:07 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:08 IQ138000 ModemManager[477]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 04:39:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:08 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:39:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:08 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:39:08 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:39:09 IQ138000 python3[1945]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:39:09 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:39:09 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:39:09 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 04:39:09 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:39:09 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:39:09 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:39:09 IQ138000 knxd[5378]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:39:09 IQ138000 knxd[5378]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:39:09 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:39:09 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:39:09 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:39:09 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:09 IQ138000 ModemManager[477]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7251] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7282] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7303] device (ttyUSB1): modem state 'enabling'
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7329] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7351] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7407] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7428] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:09 IQ138000 NetworkManager[403]: <info>  [1760157549.7462] manager: NetworkManager state is now CONNECTING
Oct 11 04:39:09 IQ138000 ModemManager[477]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 04:39:09 IQ138000 wb-mqtt-nm-helper[2034]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 04:39:09 IQ138000 ModemManager[477]: <info>  [modem0] power state updated: on
Oct 11 04:39:10 IQ138000 python3[1945]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:39:10 IQ138000 python3[1945]:    --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:39:10 IQ138000 python3[1945]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:39:10 IQ138000 python3[1945]:            |                model: A7602E-H
Oct 11 04:39:10 IQ138000 python3[1945]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:39:10 IQ138000 python3[1945]:            |            supported: gsm-umts
Oct 11 04:39:10 IQ138000 python3[1945]:            |              current: gsm-umts
Oct 11 04:39:10 IQ138000 python3[1945]:            |         equipment id: 860803062234204
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   System   |               device: wbc
Oct 11 04:39:10 IQ138000 python3[1945]:            |              drivers: option, rndis_host
Oct 11 04:39:10 IQ138000 python3[1945]:            |               plugin: simtech
Oct 11 04:39:10 IQ138000 python3[1945]:            |         primary port: ttyUSB1
Oct 11 04:39:10 IQ138000 python3[1945]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:39:10 IQ138000 python3[1945]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:39:10 IQ138000 python3[1945]:            |                state: enabling
Oct 11 04:39:10 IQ138000 python3[1945]:            |          power state: on
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:39:10 IQ138000 python3[1945]:            |              current: allowed: any; preferred: none
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   3GPP     |                 imei: 860803062234204
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:39:10 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:10 IQ138000 python3[1945]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:10 IQ138000 python3[1945]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:39:10 IQ138000 python3[1945]:            |                       slot 2: none
Oct 11 04:39:10 IQ138000 python3[1945]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 04:39:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:39:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:39:10 IQ138000 python3[1945]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 04:39:10 IQ138000 python3[1945]:  successfully requested primary SIM switch in modem
Oct 11 04:39:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:39:12 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:39:12 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 04:39:12 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:39:12 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:39:12 IQ138000 lsyncd[5419]: 04:39:12 Normal: --- Startup ---
Oct 11 04:39:12 IQ138000 lsyncd[5419]: 04:39:12 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:39:12 IQ138000 lsyncd[5419]: iq_network_manager/iq_network_manager.log
Oct 11 04:39:12 IQ138000 lsyncd[5419]: journal
Oct 11 04:39:12 IQ138000 lsyncd[5419]: messages
Oct 11 04:39:12 IQ138000 lsyncd[5421]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:39:12 IQ138000 lsyncd[5420]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:39:12 IQ138000 lsyncd[5420]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:39:12 IQ138000 lsyncd[5419]: 04:39:12 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:39:12 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:39:12 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:39:12 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:39:13 IQ138000 wb-rules[4553]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] simple connect started...
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (6/10): register
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 04:39:14 IQ138000 NetworkManager[403]: <info>  [1760157554.5515] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:14 IQ138000 NetworkManager[403]: <info>  [1760157554.5528] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 04:39:14 IQ138000 NetworkManager[403]: <info>  [1760157554.5565] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 04:39:14 IQ138000 NetworkManager[403]: <info>  [1760157554.5586] ppp-manager: starting PPP connection
Oct 11 04:39:14 IQ138000 NetworkManager[403]: <info>  [1760157554.5717] ppp-manager: pppd started with pid 5439
Oct 11 04:39:14 IQ138000 pppd[5439]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:39:14 IQ138000 NetworkManager[5439]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: initializing
Oct 11 04:39:14 IQ138000 pppd[5439]: pppd 2.4.9 started by root, uid 0
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 04:39:14 IQ138000 pppd[5439]: Using interface ppp0
Oct 11 04:39:14 IQ138000 NetworkManager[5439]: Using interface ppp0
Oct 11 04:39:14 IQ138000 NetworkManager[5439]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 04:39:14 IQ138000 pppd[5439]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 04:39:14 IQ138000 NetworkManager[403]: <info>  [1760157554.6367] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 04:39:14 IQ138000 pppd[5439]: PAP authentication succeeded
Oct 11 04:39:14 IQ138000 NetworkManager[5439]: PAP authentication succeeded
Oct 11 04:39:14 IQ138000 NetworkManager[5439]: kernel does not support PPP filtering
Oct 11 04:39:14 IQ138000 pppd[5439]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 04:39:14 IQ138000 pppd[5439]: kernel does not support PPP filtering
Oct 11 04:39:14 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 04:39:14 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 04:39:14 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:39:14 IQ138000 ModemManager[477]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 04:39:14 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:39:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:39:15 IQ138000 wb-rules[4553]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:39:15 IQ138000 pppd[5439]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:39:15 IQ138000 NetworkManager[5439]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:39:15 IQ138000 NetworkManager[5439]: local  IP address 10.4.137.45
Oct 11 04:39:15 IQ138000 NetworkManager[5439]: remote IP address 10.64.64.64
Oct 11 04:39:15 IQ138000 NetworkManager[5439]: primary   DNS address 172.23.10.130
Oct 11 04:39:15 IQ138000 NetworkManager[5439]: secondary DNS address 172.23.10.131
Oct 11 04:39:15 IQ138000 pppd[5439]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 04:39:15 IQ138000 pppd[5439]: local  IP address 10.4.137.45
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.1620] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:39:15 IQ138000 pppd[5439]: remote IP address 10.64.64.64
Oct 11 04:39:15 IQ138000 pppd[5439]: primary   DNS address 172.23.10.130
Oct 11 04:39:15 IQ138000 pppd[5439]: secondary DNS address 172.23.10.131
Oct 11 04:39:15 IQ138000 pppd[5439]: nm-ppp-plugin: ip-up event
Oct 11 04:39:15 IQ138000 pppd[5439]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.1763] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.1803] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.1867] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.1921] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 04:39:15 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:39:15 IQ138000 dbus-daemon[297]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.2380] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:15 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:39:15 IQ138000 vnstatd[1653]: Info: Interface "ppp0" enabled.
Oct 11 04:39:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:15 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:39:15 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:39:15 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.3332] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.3346] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.3367] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.3389] device (ttyUSB1): Activation: successful, device activated.
Oct 11 04:39:15 IQ138000 NetworkManager[403]: <info>  [1760157555.3422] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 04:39:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:39:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:39:16 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:17 IQ138000 ntpd[1645]: Listen normally on 4 ppp0 10.4.137.45:123
Oct 11 04:39:17 IQ138000 ntpd[1645]: new interface(s) found: waking up resolver
Oct 11 04:39:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:39:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:39:18 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:39:18 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:39:19 IQ138000 ntpd[1645]: Soliciting pool server 51.250.110.169
Oct 11 04:39:19 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 04:39:19 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:39:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:39:19 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:39:19 IQ138000 wb-mqtt-knx[1998]: INFO: knxd connected successfully
Oct 11 04:39:20 IQ138000 ntpd[1645]: Soliciting pool server 80.66.81.211
Oct 11 04:39:20 IQ138000 ntpd[1645]: Soliciting pool server 51.250.53.172
Oct 11 04:39:20 IQ138000 ntpd[1645]: Soliciting pool server 5.23.48.17
Oct 11 04:39:20 IQ138000 python3[1945]: Выполнение: mmcli -i any
Oct 11 04:39:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:39:20 IQ138000 python3[1945]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 04:39:20 IQ138000 python3[1945]:    -------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:20 IQ138000 python3[1945]:   -------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Properties |            active: yes
Oct 11 04:39:20 IQ138000 python3[1945]:              |              imsi: 250997340491874
Oct 11 04:39:20 IQ138000 python3[1945]:              |             iccid: 8970199210429593744
Oct 11 04:39:20 IQ138000 python3[1945]:              |       operator id: 25099
Oct 11 04:39:20 IQ138000 python3[1945]:              |     operator name: Beeline
Oct 11 04:39:20 IQ138000 python3[1945]: Выполнение: mmcli -m wbc
Oct 11 04:39:20 IQ138000 python3[1945]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:39:20 IQ138000 python3[1945]:    --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:39:20 IQ138000 python3[1945]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:39:20 IQ138000 python3[1945]:            |                model: A7602E-H
Oct 11 04:39:20 IQ138000 python3[1945]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:39:20 IQ138000 python3[1945]:            |            supported: gsm-umts
Oct 11 04:39:20 IQ138000 python3[1945]:            |              current: gsm-umts
Oct 11 04:39:20 IQ138000 python3[1945]:            |         equipment id: 860803062234204
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   System   |               device: wbc
Oct 11 04:39:20 IQ138000 python3[1945]:            |              drivers: option, rndis_host
Oct 11 04:39:20 IQ138000 python3[1945]:            |               plugin: simtech
Oct 11 04:39:20 IQ138000 python3[1945]:            |         primary port: ttyUSB1
Oct 11 04:39:20 IQ138000 python3[1945]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:39:20 IQ138000 python3[1945]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:39:20 IQ138000 python3[1945]:            |                state: connected
Oct 11 04:39:20 IQ138000 python3[1945]:            |          power state: on
Oct 11 04:39:20 IQ138000 python3[1945]:            |          access tech: lte
Oct 11 04:39:20 IQ138000 python3[1945]:            |       signal quality: 90% (recent)
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:39:20 IQ138000 python3[1945]:            |              current: allowed: any; preferred: none
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   3GPP     |                 imei: 860803062234204
Oct 11 04:39:20 IQ138000 python3[1945]:            |          operator id: 25099
Oct 11 04:39:20 IQ138000 python3[1945]:            |        operator name: beeline
Oct 11 04:39:20 IQ138000 python3[1945]:            |         registration: home
Oct 11 04:39:20 IQ138000 python3[1945]:            | packet service state: attached
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:20 IQ138000 python3[1945]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:39:20 IQ138000 python3[1945]:            |                       slot 2: none
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:39:20 IQ138000 python3[1945]: Current state: home
Oct 11 04:39:20 IQ138000 python3[1945]: SIM registered in the network.
Oct 11 04:39:20 IQ138000 python3[1945]: Выполнение: mmcli -m wbc
Oct 11 04:39:20 IQ138000 python3[1945]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:39:20 IQ138000 python3[1945]:    --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:39:20 IQ138000 python3[1945]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:39:20 IQ138000 python3[1945]:            |                model: A7602E-H
Oct 11 04:39:20 IQ138000 python3[1945]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:39:20 IQ138000 python3[1945]:            |            supported: gsm-umts
Oct 11 04:39:20 IQ138000 python3[1945]:            |              current: gsm-umts
Oct 11 04:39:20 IQ138000 python3[1945]:            |         equipment id: 860803062234204
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   System   |               device: wbc
Oct 11 04:39:20 IQ138000 python3[1945]:            |              drivers: option, rndis_host
Oct 11 04:39:20 IQ138000 python3[1945]:            |               plugin: simtech
Oct 11 04:39:20 IQ138000 python3[1945]:            |         primary port: ttyUSB1
Oct 11 04:39:20 IQ138000 python3[1945]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:39:20 IQ138000 python3[1945]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:39:20 IQ138000 python3[1945]:            |                state: connected
Oct 11 04:39:20 IQ138000 python3[1945]:            |          power state: on
Oct 11 04:39:20 IQ138000 python3[1945]:            |          access tech: lte
Oct 11 04:39:20 IQ138000 python3[1945]:            |       signal quality: 90% (recent)
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:39:20 IQ138000 python3[1945]:            |              current: allowed: any; preferred: none
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   3GPP     |                 imei: 860803062234204
Oct 11 04:39:20 IQ138000 python3[1945]:            |          operator id: 25099
Oct 11 04:39:20 IQ138000 python3[1945]:            |        operator name: beeline
Oct 11 04:39:20 IQ138000 python3[1945]:            |         registration: home
Oct 11 04:39:20 IQ138000 python3[1945]:            | packet service state: attached
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:20 IQ138000 python3[1945]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:39:20 IQ138000 python3[1945]:            |                       slot 2: none
Oct 11 04:39:20 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:39:20 IQ138000 python3[1945]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:20 IQ138000 python3[1945]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:39:20 IQ138000 python3[1945]:    -------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:20 IQ138000 python3[1945]:   -------------------------------
Oct 11 04:39:20 IQ138000 python3[1945]:   Properties |            active: yes
Oct 11 04:39:20 IQ138000 python3[1945]:              |              imsi: 250997340491874
Oct 11 04:39:20 IQ138000 python3[1945]:              |             iccid: 8970199210429593744
Oct 11 04:39:20 IQ138000 python3[1945]:              |       operator id: 25099
Oct 11 04:39:20 IQ138000 python3[1945]:              |     operator name: Beeline
Oct 11 04:39:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:21 IQ138000 ntpd[1645]: Soliciting pool server 46.160.198.122
Oct 11 04:39:21 IQ138000 ntpd[1645]: Soliciting pool server 83.243.68.157
Oct 11 04:39:21 IQ138000 ntpd[1645]: Soliciting pool server 188.225.9.167
Oct 11 04:39:21 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:22 IQ138000 ntpd[1645]: Soliciting pool server 151.0.2.54
Oct 11 04:39:22 IQ138000 ntpd[1645]: Soliciting pool server 185.211.244.47
Oct 11 04:39:22 IQ138000 ntpd[1645]: Soliciting pool server 90.188.9.144
Oct 11 04:39:22 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:23 IQ138000 ntpd[1645]: Soliciting pool server 91.201.254.110
Oct 11 04:39:23 IQ138000 ntpd[1645]: Soliciting pool server 151.0.2.53
Oct 11 04:39:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:24 IQ138000 ntpd[1645]: Soliciting pool server 212.113.99.6
Oct 11 04:39:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 ntpd[1645]: Soliciting pool server 162.159.200.1
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 python3[1945]: Выполнение: mmcli -m wbc
Oct 11 04:39:25 IQ138000 python3[1945]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:39:25 IQ138000 python3[1945]:    --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:39:25 IQ138000 python3[1945]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:39:25 IQ138000 python3[1945]:            |                model: A7602E-H
Oct 11 04:39:25 IQ138000 python3[1945]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:39:25 IQ138000 python3[1945]:            |            supported: gsm-umts
Oct 11 04:39:25 IQ138000 python3[1945]:            |              current: gsm-umts
Oct 11 04:39:25 IQ138000 python3[1945]:            |         equipment id: 860803062234204
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   System   |               device: wbc
Oct 11 04:39:25 IQ138000 python3[1945]:            |              drivers: option, rndis_host
Oct 11 04:39:25 IQ138000 python3[1945]:            |               plugin: simtech
Oct 11 04:39:25 IQ138000 python3[1945]:            |         primary port: ttyUSB1
Oct 11 04:39:25 IQ138000 python3[1945]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:39:25 IQ138000 python3[1945]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:39:25 IQ138000 python3[1945]:            |                state: connected
Oct 11 04:39:25 IQ138000 python3[1945]:            |          power state: on
Oct 11 04:39:25 IQ138000 python3[1945]:            |          access tech: lte
Oct 11 04:39:25 IQ138000 python3[1945]:            |       signal quality: 93% (recent)
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:39:25 IQ138000 python3[1945]:            |              current: allowed: any; preferred: none
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   3GPP     |                 imei: 860803062234204
Oct 11 04:39:25 IQ138000 python3[1945]:            |          operator id: 25099
Oct 11 04:39:25 IQ138000 python3[1945]:            |        operator name: beeline
Oct 11 04:39:25 IQ138000 python3[1945]:            |         registration: home
Oct 11 04:39:25 IQ138000 python3[1945]:            | packet service state: attached
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:25 IQ138000 python3[1945]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:39:25 IQ138000 python3[1945]:            |                       slot 2: none
Oct 11 04:39:25 IQ138000 python3[1945]:   --------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:39:25 IQ138000 python3[1945]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 python3[1945]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:39:25 IQ138000 python3[1945]:    -------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:39:25 IQ138000 python3[1945]:   -------------------------------
Oct 11 04:39:25 IQ138000 python3[1945]:   Properties |            active: yes
Oct 11 04:39:25 IQ138000 python3[1945]:              |              imsi: 250997340491874
Oct 11 04:39:25 IQ138000 python3[1945]:              |             iccid: 8970199210429593744
Oct 11 04:39:25 IQ138000 python3[1945]:              |       operator id: 25099
Oct 11 04:39:25 IQ138000 python3[1945]:              |     operator name: Beeline
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:26 IQ138000 ntpd[1645]: Soliciting pool server 2a0d:8480:0:672::123
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:39:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:39:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
-- Boot 6de3f63e04df4e92b474e6d37dd82bba --
Oct 11 04:43:04 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 04:43:04 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 04:43:04 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 04:43:04 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 04:43:04 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 04:43:04 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 04:43:04 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 04:43:04 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 04:43:04 IQ138000 kernel: Zone ranges:
Oct 11 04:43:04 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 04:43:04 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 04:43:04 IQ138000 kernel: Movable zone start for each node
Oct 11 04:43:04 IQ138000 kernel: Early memory node ranges
Oct 11 04:43:04 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:43:04 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 04:43:04 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 04:43:04 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 04:43:04 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 04:43:04 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 04:43:04 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 04:43:04 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 04:43:04 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 04:43:04 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 04:43:04 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 04:43:04 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 04:43:04 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 04:43:04 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 04:43:04 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 04:43:04 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 04:43:04 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 04:43:04 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 04:43:04 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 04:43:04 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 04:43:04 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 04:43:04 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 04:43:04 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 04:43:04 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 04:43:04 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 04:43:04 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 04:43:04 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 04:43:04 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 04:43:04 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 04:43:04 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 04:43:04 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 04:43:04 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 04:43:04 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 04:43:04 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 04:43:04 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 04:43:04 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 04:43:04 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 04:43:04 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 04:43:04 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 04:43:04 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 04:43:04 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 04:43:04 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 04:43:04 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 04:43:04 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 04:43:04 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 04:43:04 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 04:43:04 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 04:43:04 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 04:43:04 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 04:43:04 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 04:43:04 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 04:43:04 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 04:43:04 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 04:43:04 IQ138000 kernel: devtmpfs: initialized
Oct 11 04:43:04 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 04:43:04 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 04:43:04 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 04:43:04 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 04:43:04 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 04:43:04 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 04:43:04 IQ138000 kernel: No ATAGs?
Oct 11 04:43:04 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 04:43:04 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 04:43:04 IQ138000 kernel: SCSI subsystem initialized
Oct 11 04:43:04 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 04:43:04 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 04:43:04 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 04:43:04 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 04:43:04 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 04:43:04 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 04:43:04 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 04:43:04 IQ138000 kernel: PTP clock support registered
Oct 11 04:43:04 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 04:43:04 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 04:43:04 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 04:43:04 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 04:43:04 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 04:43:04 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 04:43:04 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 04:43:04 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 04:43:04 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 04:43:04 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 04:43:04 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 04:43:04 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 04:43:04 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 04:43:04 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 04:43:04 IQ138000 kernel: Key type id_resolver registered
Oct 11 04:43:04 IQ138000 kernel: Key type id_legacy registered
Oct 11 04:43:04 IQ138000 kernel: Key type asymmetric registered
Oct 11 04:43:04 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 04:43:04 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 04:43:04 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 04:43:04 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 04:43:04 IQ138000 kernel: io scheduler kyber registered
Oct 11 04:43:04 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:43:04 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 04:43:04 IQ138000 kernel: brd: module loaded
Oct 11 04:43:04 IQ138000 kernel: loop: module loaded
Oct 11 04:43:04 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 04:43:04 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:43:04 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:43:04 IQ138000 kernel: CAN device driver interface
Oct 11 04:43:04 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 04:43:04 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 04:43:04 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 04:43:04 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 04:43:04 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 04:43:04 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 04:43:04 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 04:43:04 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 04:43:04 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 04:43:04 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 04:43:04 IQ138000 kernel: i2c /dev entries driver
Oct 11 04:43:04 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 04:43:04 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 04:43:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 04:43:04 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 04:43:04 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 04:43:04 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 04:43:04 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 04:43:04 IQ138000 kernel: Segment Routing with IPv6
Oct 11 04:43:04 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 04:43:04 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 04:43:04 IQ138000 kernel: can: controller area network core
Oct 11 04:43:04 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 04:43:04 IQ138000 kernel: can: raw protocol
Oct 11 04:43:04 IQ138000 kernel: can: broadcast manager protocol
Oct 11 04:43:04 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 04:43:04 IQ138000 kernel: can: SAE J1939
Oct 11 04:43:04 IQ138000 kernel: Key type dns_resolver registered
Oct 11 04:43:04 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 04:43:04 IQ138000 kernel: registered taskstats version 1
Oct 11 04:43:04 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 04:43:04 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 04:43:04 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 04:43:04 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:43:04 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 04:43:04 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 04:43:04 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 04:43:04 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 04:43:04 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T04:43:00 UTC (1760157780)
Oct 11 04:43:04 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 04:43:04 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:43:04 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 04:43:04 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 04:43:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 04:43:04 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 04:43:04 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 04:43:04 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 04:43:04 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 04:43:04 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 04:43:04 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 04:43:04 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 04:43:04 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 04:43:04 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 04:43:04 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: random: fast init done
Oct 11 04:43:04 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 04:43:04 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 04:43:04 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 04:43:04 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 04:43:04 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 04:43:04 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 04:43:04 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 04:43:04 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 04:43:04 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 04:43:04 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:43:04 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 04:43:04 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 04:43:04 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 04:43:04 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 04:43:04 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 04:43:04 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 04:43:04 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 04:43:04 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 04:43:04 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 04:43:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 04:43:04 IQ138000 kernel: libphy: stmmac: probed
Oct 11 04:43:04 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:43:04 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 04:43:04 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:43:04 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 04:43:04 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 04:43:04 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 04:43:04 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 04:43:04 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 04:43:04 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 04:43:04 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 04:43:04 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 04:43:04 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 04:43:04 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 04:43:04 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:43:04 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 04:43:04 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 04:43:04 IQ138000 kernel: of_cfs_init
Oct 11 04:43:04 IQ138000 kernel: of_cfs_init: OK
Oct 11 04:43:04 IQ138000 kernel: ALSA device list:
Oct 11 04:43:04 IQ138000 kernel:   No soundcards found.
Oct 11 04:43:04 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 04:43:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 04:43:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 04:43:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 04:43:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 04:43:04 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 04:43:04 IQ138000 kernel: devtmpfs: mounted
Oct 11 04:43:04 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 04:43:04 IQ138000 kernel: Run /sbin/init as init process
Oct 11 04:43:04 IQ138000 kernel:   with arguments:
Oct 11 04:43:04 IQ138000 kernel:     /sbin/init
Oct 11 04:43:04 IQ138000 kernel:   with environment:
Oct 11 04:43:04 IQ138000 kernel:     HOME=/
Oct 11 04:43:04 IQ138000 kernel:     TERM=linux
Oct 11 04:43:04 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 04:43:04 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 04:43:04 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 04:43:04 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 04:43:04 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 04:43:04 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:43:04 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 04:43:04 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:43:04 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 04:43:04 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 04:43:04 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 04:43:04 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 04:43:04 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 04:43:04 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 04:43:04 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 04:43:04 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:43:04 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 04:43:04 IQ138000 systemd[1]: Reached target Paths.
Oct 11 04:43:04 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 04:43:04 IQ138000 systemd[1]: Reached target Slices.
Oct 11 04:43:04 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 04:43:04 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 04:43:04 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 04:43:04 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 04:43:04 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 04:43:04 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 04:43:04 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 04:43:04 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:43:04 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 04:43:04 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 04:43:04 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 04:43:04 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 04:43:04 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 04:43:04 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:43:04 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 04:43:04 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 04:43:04 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 04:43:04 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 04:43:04 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 04:43:04 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 04:43:04 IQ138000 systemd-journald[141]: Journal started
Oct 11 04:43:04 IQ138000 systemd-journald[141]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 04:43:04 IQ138000 systemd-fsck[144]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 04:43:04 IQ138000 systemd[1]: Started Journal Service.
Oct 11 04:43:04 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 04:43:04 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 04:43:04 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 04:43:04 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 04:43:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 04:43:04 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 04:43:04 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 04:43:04 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:43:04 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:43:05 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 04:43:05 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 04:43:05 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 04:43:05 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 04:43:05 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 04:43:05 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 04:43:05 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 04:43:05 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 04:43:05 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 04:43:05 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 04:43:05 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 04:43:05 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 04:43:05 IQ138000 systemd-udevd[158]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 04:43:05 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 04:43:05 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 04:43:06 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 04:43:06 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 04:43:06 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 04:43:06 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 04:43:06 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 04:43:06 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 04:43:06 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 04:43:06 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 04:43:06 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 04:43:06 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 04:43:06 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 04:43:06 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 04:43:06 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 04:43:06 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 04:43:06 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 04:43:06 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 04:43:06 IQ138000 systemd-udevd[167]: eth1: Failed to query device driver: Device or resource busy
Oct 11 04:43:06 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 04:43:06 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 04:43:06 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 04:43:06 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 04:43:06 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 04:43:06 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 04:43:07 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 04:43:07 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 04:43:07 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 04:43:07 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 04:43:07 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 04:43:07 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 04:43:07 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 04:43:07 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:43:07 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:43:07 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 04:43:07 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 04:43:07 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 04:43:07 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 04:43:07 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 04:43:07 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 04:43:07 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 04:43:07 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 04:43:07 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 04:43:07 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 04:43:07 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 04:43:07 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 04:43:07 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 04:43:07 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 04:43:07 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 04:43:07 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 04:43:07 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 04:43:07 IQ138000 systemd[1]: Reached target Swap.
Oct 11 04:43:07 IQ138000 systemd-fsck[215]: data: recovering journal
Oct 11 04:43:07 IQ138000 systemd-fsck[215]: data: Clearing orphaned inode 128531 (uid=0, gid=101, mode=0100640, size=8388608)
Oct 11 04:43:07 IQ138000 systemd-fsck[215]: data: clean, 16450/328656 files, 373372/1313536 blocks
Oct 11 04:43:07 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 04:43:07 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 04:43:07 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 04:43:07 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 04:43:07 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 04:43:07 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 04:43:07 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 04:43:08 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 04:43:08 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 04:43:08 IQ138000 systemd-journald[141]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.240ms for 462 entries.
Oct 11 04:43:08 IQ138000 systemd-journald[141]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 504.4M, max 496.6M, 0B free.
Oct 11 04:43:08 IQ138000 kernel: random: crng init done
Oct 11 04:43:08 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 04:43:08 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 04:43:08 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 04:43:08 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 04:43:08 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 04:43:08 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 04:43:08 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 04:43:08 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 04:43:08 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 04:43:08 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 04:43:09 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 04:43:09 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 04:43:09 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 04:43:09 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 04:43:09 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 04:43:09 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 04:43:09 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 04:43:09 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 04:43:09 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 04:43:09 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 04:43:09 IQ138000 systemd[1]: Reached target Timers.
Oct 11 04:43:09 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 04:43:09 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 04:43:09 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 04:43:09 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 04:43:09 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 04:43:09 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 04:43:09 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 04:43:09 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 04:43:09 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:43:09 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 04:43:09 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 04:43:09 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 04:43:09 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 04:43:09 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 04:43:09 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 04:43:09 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 04:43:09 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 04:43:09 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 04:43:09 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:43:09 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 04:43:09 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 04:43:09 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 04:43:09 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 04:43:09 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 04:43:09 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 04:43:09 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 04:43:09 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 04:43:09 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:43:09 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:43:09 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 04:43:09 IQ138000 migrate.sh[320]: Error: No such file or directory
Oct 11 04:43:09 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 04:43:09 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 04:43:10 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:43:10 IQ138000 migrate.sh[329]: Error: No such file or directory
Oct 11 04:43:10 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:43:10 IQ138000 migrate.sh[342]: Error: No such file or directory
Oct 11 04:43:10 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 04:43:10 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 04:43:10 IQ138000 reverse-ssh.sh[347]: Error: No such file or directory
Oct 11 04:43:10 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:43:10 IQ138000 migrate.sh[355]: Error: No such file or directory
Oct 11 04:43:10 IQ138000 systemd[1]: Started watch config files.
Oct 11 04:43:10 IQ138000 migrate.sh[362]: Error: No such file or directory
Oct 11 04:43:10 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 04:43:10 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 04:43:10 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 04:43:10 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 04:43:10 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 04:43:10 IQ138000 rules-preprocessor[341]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 04:43:10 IQ138000 rules-preprocessor[341]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 04:43:10 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 04:43:10 IQ138000 wb-watch-configs[381]: Watched dirs: /etc /etc/network
Oct 11 04:43:10 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Successfully dropped root privileges.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: avahi-daemon 0.8 starting up.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Successfully called chroot().
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Successfully dropped remaining capabilities.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: No service file found in /etc/avahi/services.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: New relevant interface lo.IPv6 for mDNS.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: New relevant interface lo.IPv4 for mDNS.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Network interface enumeration completed.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Registering new address record for ::1 on lo.*.
Oct 11 04:43:10 IQ138000 avahi-daemon[372]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 04:43:10 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:43:10 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:43:10 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 04:43:10 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 04:43:10 IQ138000 wpa_supplicant[385]: Successfully initialized wpa_supplicant
Oct 11 04:43:10 IQ138000 systemd-logind[350]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 04:43:10 IQ138000 systemd-logind[350]: New seat seat0.
Oct 11 04:43:10 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 04:43:10 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 04:43:10 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:10 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 04:43:10 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 04:43:10 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 04:43:10 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:10 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:43:10 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:43:10 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 04:43:10 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 04:43:10 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 04:43:10 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:10 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:43:10 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 04:43:10 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 04:43:10 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 04:43:10 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:43:10 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:43:11 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.1015] NetworkManager (version 1.42.4) is starting... (boot:6de3f63e-04df-4e92-b474-e6d37dd82bba)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.1044] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 04:43:11 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 04:43:11 IQ138000 systemd[1]: Started User Login Management.
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.1263] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 04:43:11 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 04:43:11 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.1821] manager[0x6f6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 04:43:11 IQ138000 monit[325]: Starting daemon monitor: monit.
Oct 11 04:43:11 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 04:43:11 IQ138000 avahi-daemon[372]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1125330624.
Oct 11 04:43:11 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 04:43:11 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 04:43:11 IQ138000 systemd[1]: Started Network Manager.
Oct 11 04:43:11 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 04:43:11 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 04:43:11 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 04:43:11 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 04:43:11 IQ138000 ModemManager[479]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 04:43:11 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 04:43:11 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.8719] hostname: hostname: using hostnamed
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.8724] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.8763] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.8852] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.8871] manager[0x6f6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.8873] manager[0x6f6900]: rfkill: WWAN hardware radio set enabled
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9145] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9231] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9302] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 04:43:11 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9626] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9671] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9691] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9696] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9701] manager: Networking is enabled by state file
Oct 11 04:43:11 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9789] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9792] settings: Loaded settings plugin: keyfile (internal)
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9794] ifupdown: management mode: unmanaged
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9795] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 04:43:11 IQ138000 NetworkManager[404]: <info>  [1760157791.9797] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 04:43:12 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0344] dhcp: init: Using DHCP client 'internal'
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0376] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0521] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0599] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0690] device (lo): Activation: starting connection 'lo' (e33d5782-b9ed-49c9-bd1d-5582e07d590f)
Oct 11 04:43:12 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0783] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 04:43:12 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.0832] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.4465] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.4486] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.4611] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.4680] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:12 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 04:43:12 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 04:43:12 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 04:43:12 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 04:43:12 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 04:43:12 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.6872] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.6931] device (wlan0): driver supports Access Point (AP) mode
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.6994] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 04:43:12 IQ138000 NetworkManager[404]: <info>  [1760157792.7032] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.5171] device (wlan1): driver supports Access Point (AP) mode
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.5228] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.5253] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6444] modem-manager: ModemManager available
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6454] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6477] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6493] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6562] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 wpa_supplicant[385]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6843] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6855] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.6897] device (lo): Activation: successful, device activated.
Oct 11 04:43:13 IQ138000 wpa_supplicant[385]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.9747] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.9754] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.9779] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.9800] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.9833] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:43:13 IQ138000 NetworkManager[404]: <info>  [1760157793.9919] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:14 IQ138000 NetworkManager[404]: <info>  [1760157794.0038] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 04:43:14 IQ138000 NetworkManager[404]: <info>  [1760157794.0044] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 04:43:14 IQ138000 NetworkManager[404]: <info>  [1760157794.0063] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 04:43:14 IQ138000 NetworkManager[404]: <info>  [1760157794.0122] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:14 IQ138000 NetworkManager[404]: <info>  [1760157794.0230] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 04:43:14 IQ138000 NetworkManager[404]: <info>  [1760157794.0279] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:14 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 04:43:14 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 04:43:14 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 04:43:17 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 04:43:17 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 04:43:17 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:17 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:43:17 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 04:43:18 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 04:43:18 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 04:43:18 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:18 IQ138000 init.sh[1319]: ...
Oct 11 04:43:18 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 04:43:18 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:18 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 04:43:18 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 04:43:18 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 04:43:18 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 04:43:18 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:18 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 04:43:18 IQ138000 init.sh[1319]: ...
Oct 11 04:43:18 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 04:43:18 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:19 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 04:43:19 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 04:43:19 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 04:43:19 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 04:43:19 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:19 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 04:43:19 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 04:43:19 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 04:43:19 IQ138000 init.sh[1319]: ...
Oct 11 04:43:19 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 04:43:19 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 04:43:19 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 04:43:19 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 04:43:20 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 04:43:20 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 04:43:20 IQ138000 systemd[1]: Reached target Network.
Oct 11 04:43:20 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 04:43:20 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 04:43:20 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:43:20 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:43:20 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 04:43:20 IQ138000 lsyncd[1614]: 04:43:20 Normal: --- Startup ---
Oct 11 04:43:20 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 04:43:20 IQ138000 lsyncd[1614]: 04:43:20 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:43:20 IQ138000 lsyncd[1614]: iq_network_manager/iq_network_manager.log
Oct 11 04:43:20 IQ138000 lsyncd[1614]: journal
Oct 11 04:43:20 IQ138000 lsyncd[1614]: messages
Oct 11 04:43:20 IQ138000 knxd[1608]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:43:20 IQ138000 knxd[1608]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:43:20 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:43:20 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 04:43:20 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 04:43:20 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 04:43:20 IQ138000 ntpd[1621]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 04:43:20 IQ138000 ntpd[1621]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 04:43:20 IQ138000 ntpd[1621]: ----------------------------------------------------
Oct 11 04:43:20 IQ138000 ntpd[1621]: ntp-4 is maintained by Network Time Foundation,
Oct 11 04:43:20 IQ138000 ntpd[1621]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 04:43:20 IQ138000 ntpd[1621]: corporation.  Support and training for ntp-4 are
Oct 11 04:43:20 IQ138000 ntpd[1621]: available at https://www.nwtime.org/support
Oct 11 04:43:20 IQ138000 ntpd[1621]: ----------------------------------------------------
Oct 11 04:43:20 IQ138000 ntpd[1644]: proto: precision = 1.041 usec (-20)
Oct 11 04:43:20 IQ138000 lsyncd[1629]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:43:20 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 04:43:20 IQ138000 ntpd[1644]: basedate set to 2020-09-11
Oct 11 04:43:20 IQ138000 ntpd[1644]: gps base set to 2020-09-13 (week 2123)
Oct 11 04:43:20 IQ138000 lsyncd[1622]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:43:20 IQ138000 lsyncd[1622]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:43:20 IQ138000 lsyncd[1614]: 04:43:20 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:43:20 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 04:43:20 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 04:43:20 IQ138000 ntpd[1644]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 04:43:20 IQ138000 ntpd[1644]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 04:43:20 IQ138000 ntpd[1644]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 04:43:20 IQ138000 ntpd[1644]: Listen normally on 3 lo [::1]:123
Oct 11 04:43:20 IQ138000 ntpd[1644]: Listening on routing socket on fd #20 for interface updates
Oct 11 04:43:20 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 04:43:20 IQ138000 persist_meter_data.sh[1649]: Error: No such file or directory
Oct 11 04:43:20 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 04:43:21 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 04:43:21 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 04:43:21 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 04:43:21 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 04:43:21 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:43:21 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:43:21 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 04:43:21 IQ138000 wb-mqtt-w1[1684]: MQTT broker localhost:1883
Oct 11 04:43:21 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:21 IQ138000 wb-mqtt-w1[1684]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:43:21 IQ138000 wb-mqtt-w1[1684]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 04:43:21 IQ138000 wb-mqtt-w1[1684]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 04:43:21 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:43:21 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:43:21 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 04:43:21 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 04:43:21 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 04:43:21 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 04:43:21 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 04:43:21 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 04:43:21 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:21 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:43:21 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:43:21 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:43:21 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 04:43:21 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:21 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 04:43:21 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 04:43:21 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 04:43:21 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 04:43:21 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 04:43:21 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 04:43:21 IQ138000 ntpd[1644]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:43:21 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 04:43:21 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 04:43:21 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 04:43:21 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 04:43:21 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 04:43:21 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 04:43:21 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 04:43:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 04:43:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 04:43:21 IQ138000 vnstatd[1653]: Info: vnStat daemon 2.6 started. (pid:1653 uid:110 gid:117 64-bit)
Oct 11 04:43:21 IQ138000 vnstatd[1653]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 04:43:21 IQ138000 vnstatd[1653]: Info: Interface "ppp0" disabled.
Oct 11 04:43:22 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:22 IQ138000 sshd[1747]: Server listening on 0.0.0.0 port 22.
Oct 11 04:43:22 IQ138000 sshd[1747]: Server listening on :: port 22.
Oct 11 04:43:22 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 04:43:22 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 04:43:22 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 04:43:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:43:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:43:22 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 04:43:22 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:43:22 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:43:22 IQ138000 knxd[1828]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:43:22 IQ138000 knxd[1828]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:43:22 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 04:43:22 IQ138000 NetworkManager[404]: <error> [1760157802.5544] audit: failed to open auditd socket: Protocol not supported
Oct 11 04:43:22 IQ138000 NetworkManager[404]: <info>  [1760157802.5547] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 04:43:22 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 04:43:22 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 04:43:22 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 04:43:22 IQ138000 reverse-ssh.sh[1872]: Error: No such file or directory
Oct 11 04:43:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:43:22 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 04:43:22 IQ138000 ntpd[1644]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:43:22 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 04:43:22 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:22 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:43:22 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:22 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 04:43:22 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 04:43:22 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 04:43:22 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:22 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 04:43:23 IQ138000 wb-adjust-systime[1864]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.1361] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.1521] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.1530] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Warning: Error resolving bridge address: Name or service not known.
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.1738] manager: NetworkManager state is now CONNECTING
Oct 11 04:43:23 IQ138000 mosquitto[1913]: 1760157803: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.1826] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.2137] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.2275] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:23 IQ138000 wb-adjust-systime[1864]: Drift file is valid (was recently edited)
Oct 11 04:43:23 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 04:43:23 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3085] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3151] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3174] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3179] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3181] Config: added 'scan_ssid' value '1'
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3182] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3183] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 04:43:23 IQ138000 NetworkManager[404]: <info>  [1760157803.3184] Config: added 'psk' value '<hidden>'
Oct 11 04:43:23 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 04:43:23 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 04:43:23 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 04:43:23 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 04:43:23 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 04:43:23 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 04:43:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 04:43:23 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: MQTT broker localhost:1883
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: Config file /etc/wb-mqtt-db.conf
Oct 11 04:43:23 IQ138000 ntpd[1644]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:43:23 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:23 IQ138000 wb-mqtt-knx[1997]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:23 IQ138000 wb-mqtt-knx[1997]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:23 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: INFO: [sqlite] Creating tables if necessary
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: INFO: [sqlite] Create indices if necessary
Oct 11 04:43:23 IQ138000 wb-mqtt-db[1986]: INFO: [sqlite] Analyzing data table
Oct 11 04:43:23 IQ138000 systemd[1]: Started metrics sender.
Oct 11 04:43:24 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 04:43:24 IQ138000 wb-mqtt-logs[2001]: MQTT broker localhost:1883
Oct 11 04:43:24 IQ138000 wb-mqtt-logs[2001]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:24 IQ138000 wb-mqtt-logs[2001]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:24 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 04:43:24 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 04:43:24 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:43:24 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.553s CPU time.
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 04:43:24 IQ138000 wb-mqtt-opcua[2030]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 04:43:24 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 04:43:24 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 04:43:24 IQ138000 ntpd[1644]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 04:43:24 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:43:24 IQ138000 wb-mqtt-iec104[1992]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:43:24 IQ138000 wb-mqtt-confed[1972]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:43:25 IQ138000 wb-mqtt-confed[1972]: INFO: [wbgo_mqtt] confed-IQ138000-1972: MQTT connection established
Oct 11 04:43:25 IQ138000 wb-mqtt-iec104[1992]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 04:43:25 IQ138000 wb-mqtt-iec104[1992]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 04:43:25 IQ138000 wb-mqtt-opcua[2096]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 04:43:25 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 04:43:25 IQ138000 wb-mqtt-iec104[2137]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 04:43:25 IQ138000 NetworkManager[404]: <info>  [1760157805.5285] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 04:43:25 IQ138000 NetworkManager[404]: <info>  [1760157805.5288] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 04:43:25 IQ138000 wb-mqtt-opcua[2096]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 04:43:25 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 04:43:25 IQ138000 wb-mqtt-iec104[2137]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 04:43:25 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:26 IQ138000 wb-mqtt-logs[2001]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:26 IQ138000 wb-mqtt-logs[2001]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:26 IQ138000 wb-mqtt-logs[2001]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 04:43:26 IQ138000 wb-mqtt-logs[2001]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [gpio driver] Started
Oct 11 04:43:26 IQ138000 wb-mqtt-gpio[1893]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:43:26 IQ138000 wb-mqtt-mbgate[2011]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 04:43:26 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 04:43:26 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 04:43:26 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 04:43:26 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 04:43:26 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:26 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 04:43:26 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 04:43:27 IQ138000 wb-mqtt-knx[1997]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:27 IQ138000 wb-mqtt-knx[1997]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:27 IQ138000 wb-mqtt-knx[1997]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:27 IQ138000 wb-mqtt-knx[1997]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:43:27 IQ138000 wb-mqtt-knx[1997]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 04:43:28 IQ138000 python3[1953]: No data file found at /tmp/network_status_cache.json
Oct 11 04:43:28 IQ138000 python3[1953]: Connecting to MQTT
Oct 11 04:43:28 IQ138000 python3[1953]: Connected to MQTT
Oct 11 04:43:28 IQ138000 python3[1953]: Connection returned result: Connection Accepted.
Oct 11 04:43:29 IQ138000 wpa_supplicant[385]: wlan0: Reject scan trigger since one is already pending
Oct 11 04:43:30 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2018 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:43:30 IQ138000 wb-device-manager[1963]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 04:43:30 IQ138000 wb-device-manager[1963]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:43:30 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:30 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New virtual device lo e33d5782-b9ed-49c9-bd1d-5582e07d590f /org/freedesktop/NetworkManager/Settings/7
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:43:30 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New active connection lo e33d5782-b9ed-49c9-bd1d-5582e07d590f /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 04:43:32 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 04:43:32 IQ138000 kernel: dc5ldo: disabling
Oct 11 04:43:32 IQ138000 kernel: dldo4: disabling
Oct 11 04:43:32 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 04:43:32 IQ138000 kernel: vcc-sd: disabling
Oct 11 04:43:32 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:43:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:43:33 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:43:33 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 04:43:33 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 04:43:33 IQ138000 knxd[3125]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:43:33 IQ138000 knxd[3125]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:43:33 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:43:33 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:33 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:43:33 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 04:43:33 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: MQTT broker localhost:1883
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 11
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 11
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 1
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 1
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] ADC worker thread is started
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:43:33 IQ138000 wb-mqtt-adc[3146]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 04:43:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 04:43:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 04:43:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 04:43:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 04:43:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 04:43:34 IQ138000 wb-mqtt-confed[1972]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 04:43:34 IQ138000 wb-gsm[3318]: main: Called from pid 1 (systemd)
Oct 11 04:43:34 IQ138000 wb-gsm[3364]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:43:34 IQ138000 wb-mqtt-db[1986]: INFO: [sqlite] DB initialization is done
Oct 11 04:43:35 IQ138000 wb-gsm[3443]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:43:35 IQ138000 wb-usb-otg-start.sh[3444]: : wb-usb-otg-start
Oct 11 04:43:35 IQ138000 wb-usb-otg-start.sh[3444]: main: setup_device()
Oct 11 04:43:35 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 04:43:35 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 04:43:35 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 04:43:35 IQ138000 kernel: using random self ethernet address
Oct 11 04:43:35 IQ138000 kernel: using random host ethernet address
Oct 11 04:43:35 IQ138000 wb-usb-otg-start.sh[3444]: main: enabling profile rndis
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 04:43:35 IQ138000 systemd-udevd[3429]: Using default interface naming scheme 'v247'.
Oct 11 04:43:35 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 04:43:35 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:43:35 IQ138000 NetworkManager[404]: <info>  [1760157815.6588] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:43:35 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:43:35 IQ138000 wb-gsm[3488]: should_enable: Should enable GSM modem
Oct 11 04:43:35 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 04:43:35 IQ138000 NetworkManager[404]: <info>  [1760157815.8682] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 04:43:35 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 04:43:36 IQ138000 wb-gsm[3574]: main: Called from pid 3503 (wb-gsm-mm)
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: DB logger started, go to main loop
Oct 11 04:43:36 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 04:43:36 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 04:43:37 IQ138000 wb-gsm[3589]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 04:43:37 IQ138000 wb-mqtt-db[1986]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 04:43:37 IQ138000 wb-gsm[3613]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 04:43:37 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 04:43:37 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 04:43:38 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 04:43:38 IQ138000 python3[1953]: Выполнение: service wb-connection-manager stop
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:43:38 IQ138000 npm[1690]: > zigbee2mqtt@2.1.1 start
Oct 11 04:43:38 IQ138000 npm[1690]: > node index.js
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 04:43:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 04:43:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 04:43:40 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 04:43:41 IQ138000 wb-gsm[3997]: mm_off: Modem is already OFF
Oct 11 04:43:41 IQ138000 npm[3741]: Starting Zigbee2MQTT without watchdog.
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:41 IQ138000 wb-gsm[4068]: main: Called from pid 3503 (wb-gsm-mm)
Oct 11 04:43:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:43:42 IQ138000 wb-gsm[4079]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 4350 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-gsm[4102]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 4 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:43:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:43:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 04:43:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:43:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 04:43:45 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 04:43:45 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:45 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:45 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:45 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:45 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:45 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:45 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 04:43:45 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:43:45 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:43:45 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 04:43:45 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 04:43:45 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:43:45 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:43:45 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 04:43:45 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:43:45 IQ138000 knxd[4447]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:43:45 IQ138000 knxd[4447]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:43:45 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:43:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:45 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:43:46 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 04:43:46 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:46 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:43:46 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 04:43:46 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: MQTT broker localhost:1883
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 04:43:46 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 04:43:46 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: w1 thread Started
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 04:43:46 IQ138000 wb-mqtt-w1[4457]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 04:43:46 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 04:43:46 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 04:43:46 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.238s CPU time.
Oct 11 04:43:46 IQ138000 python3[1953]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 04:43:46 IQ138000 python3[1953]:  
Oct 11 04:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:43:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 04:43:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:48 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <warn>  [1760157828.5286] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <info>  [1760157828.5288] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <info>  [1760157828.5309] manager: NetworkManager state is now DISCONNECTED
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <warn>  [1760157828.5330] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <info>  [1760157828.5344] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:43:48 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <info>  [1760157828.5757] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 04:43:48 IQ138000 NetworkManager[404]: <info>  [1760157828.5760] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 04:43:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:43:49 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 04:43:49 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 04:43:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:43:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:43:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 04:43:51 IQ138000 python3[1953]: Выполнение: mmcli -m wbc
Oct 11 04:43:51 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:52 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:43:52 IQ138000 NetworkManager[404]: <info>  [1760157832.1508] manager: startup complete
Oct 11 04:43:52 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 04:43:52 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 04:43:52 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 04:43:52 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 04:43:52 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:43:52 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 04:43:52 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 04:43:52 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 04:43:52 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 04:43:52 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 04:43:52 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 04:43:52 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 04:43:52 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 04:43:52 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:52 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 04:43:52 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 04:43:52 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 04:43:52 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 04:43:52 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:52 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 04:43:52 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 04:43:52 IQ138000 systemd[1]: Started User command handler service.
Oct 11 04:43:52 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 04:43:52 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 04:43:52 IQ138000 wb-rules[4572]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 04:43:52 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:52 IQ138000 wb-rules[4572]: INFO: driver is created
Oct 11 04:43:52 IQ138000 wb-rules[4572]: INFO: driver loop is started
Oct 11 04:43:52 IQ138000 wb-rules[4572]: INFO: wait for driver to become ready
Oct 11 04:43:52 IQ138000 wb-rules[4572]: INFO: [wbgo_mqtt] rules-IQ138000-4572: MQTT connection established
Oct 11 04:43:52 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 4 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:43:53 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 04:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:53 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 04:43:53 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 04:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 04:43:53 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:53 IQ138000 watchdog[4649]: starting daemon (5.16):
Oct 11 04:43:53 IQ138000 watchdog[4649]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 04:43:53 IQ138000 watchdog[4649]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 04:43:53 IQ138000 watchdog[4649]:  ping: no machine to check
Oct 11 04:43:53 IQ138000 watchdog[4649]:  file: no file to check
Oct 11 04:43:53 IQ138000 watchdog[4649]:  pidfile: /var/run/sshd.pid
Oct 11 04:43:53 IQ138000 watchdog[4649]:  interface: no interface to check
Oct 11 04:43:53 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 04:43:53 IQ138000 watchdog[4649]:  temperature: no sensors to check
Oct 11 04:43:53 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 04:43:53 IQ138000 watchdog[4649]:  no test binary files
Oct 11 04:43:53 IQ138000 watchdog[4649]:  no repair binary files
Oct 11 04:43:53 IQ138000 watchdog[4649]:  error retry time-out = 30 seconds
Oct 11 04:43:53 IQ138000 watchdog[4649]:  repair attempts = 1
Oct 11 04:43:53 IQ138000 watchdog[4649]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 04:43:53 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 04:43:53 IQ138000 watchdog[4649]: watchdog now set to 120 seconds
Oct 11 04:43:53 IQ138000 watchdog[4649]: hardware watchdog identity: WBEC WDT
Oct 11 04:43:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:43:53 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 04:43:53 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 04:43:53 IQ138000 systemd[1]: Startup finished in 3.770s (kernel) + 51.453s (userspace) = 55.223s.
Oct 11 04:43:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:43:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:54 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:54 IQ138000 wb-rules[4572]: INFO: driver is ready
Oct 11 04:43:54 IQ138000 wb-rules[4572]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 04:43:54 IQ138000 wb-rules[4572]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4572: MQTT connection established
Oct 11 04:43:55 IQ138000 wb-rules[4572]: INFO: [engine] Starting main loop
Oct 11 04:43:55 IQ138000 wb-rules[4572]: INFO: the engine is ready
Oct 11 04:43:55 IQ138000 wb-rules[4572]: INFO: [engine] Starting sync loop
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:55 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:55 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 04:43:55 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 8a:98:51:ad:98:f0
Oct 11 04:43:55 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 04:43:55 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 04:43:55 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 04:43:55 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:55 IQ138000 NetworkManager[404]: <info>  [1760157835.7981] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 04:43:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 04:43:55 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 04:43:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 04:43:55 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 04:43:55 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 04:43:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:55 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 04:43:56 IQ138000 systemd-udevd[4782]: Using default interface naming scheme 'v247'.
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 systemd-udevd[4782]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:56 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 04:43:56 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:43:56 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 knxd[4882]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:43:56 IQ138000 knxd[4882]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:43:56 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:43:56 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:43:56 IQ138000 wb-rules[4572]: WARNING: [rule warning] DAC: no config file
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 04:43:57 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 4 input(s) @ 16908 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 04:43:57 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 04:43:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:43:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:58 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:43:58 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 04:43:58 IQ138000 python3[1953]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 04:43:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:43:58 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 04:43:58 IQ138000 wb-gsm[5012]: mm_on: Waiting for modem to start
Oct 11 04:43:58 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:59 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:43:59 IQ138000 wb-rules[4572]: INFO: all rule files are loaded
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:43:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wpa_supplicant[385]: wlan1: Reject scan trigger since one is already pending
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:01 IQ138000 npm[3741]: [2025-10-11 04:44:01] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:44:01 IQ138000 npm[3741]: [2025-10-11 04:44:01] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 04:44:01 IQ138000 npm[3741]: [2025-10-11 04:44:01] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:02 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 04:44:02 IQ138000 npm[3741]: [2025-10-11 04:44:02] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 04:44:02 IQ138000 npm[3741]: [2025-10-11 04:44:02] info:         zh:zstack:znp: Serialport opened
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 04:44:02 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 04:44:04 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 04:44:04 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 04:44:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:05 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:44:05 IQ138000 npm[3741]: [2025-10-11 04:44:05] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 04:44:05 IQ138000 npm[3741]: [2025-10-11 04:44:05] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:05] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: Currently 4 devices are joined.
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: Connected to MQTT server
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 04:44:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:44:06 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 04:44:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:44:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:44:06 IQ138000 knxd[5129]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:44:06 IQ138000 knxd[5129]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:44:06 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:44:06 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:44:06 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:44:06 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 07:44:06.810+00:00
Oct 11 04:44:06 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 04:44:06 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T07:44:06.810Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:06 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760158026835,"cmd_timestamp_ms":1760157846835,"source":"schedule"}
Oct 11 04:44:06 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760158026835,"cmd_timestamp_ms":1760157846835,"source":"schedule"}
Oct 11 04:44:06 IQ138000 wb-rules[4572]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:44:06 IQ138000 wb-rules[4572]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:44:06 IQ138000 wb-rules[4572]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:44:06 IQ138000 wb-rules[4572]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 04:44:06 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: Started frontend on port 8282
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 04:44:06 IQ138000 npm[3741]: [2025-10-11 04:44:06] info:         z2m: Zigbee2MQTT started!
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 07:44:07.223+00:00
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T07:44:07.223Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760158027239,"cmd_timestamp_ms":1760157847239,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760158027239,"cmd_timestamp_ms":1760157847239,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 07:44:07.254+00:00
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T07:44:07.254Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027267,"cmd_timestamp_ms":1760157847267,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027267,"cmd_timestamp_ms":1760157847267,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 07:44:07.346+00:00
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T07:44:07.346Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027358,"cmd_timestamp_ms":1760157847358,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027358,"cmd_timestamp_ms":1760157847358,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 07:44:07.529+00:00
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T07:44:07.529Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027544,"cmd_timestamp_ms":1760157847544,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027544,"cmd_timestamp_ms":1760157847544,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 07:44:07.716+00:00
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T07:44:07.716Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027727,"cmd_timestamp_ms":1760157847727,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027727,"cmd_timestamp_ms":1760157847727,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 07:44:07.876+00:00
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T07:44:07.876Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027915,"cmd_timestamp_ms":1760157847915,"source":"schedule"}
Oct 11 04:44:07 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158027915,"cmd_timestamp_ms":1760157847915,"source":"schedule"}
Oct 11 04:44:07 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 07:44:08.027+00:00
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T07:44:08.027Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158028037,"cmd_timestamp_ms":1760157848037,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760158028037,"cmd_timestamp_ms":1760157848037,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 07:44:08.368+00:00
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T07:44:08.368Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760158028393,"cmd_timestamp_ms":1760157848393,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760158028393,"cmd_timestamp_ms":1760157848393,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 04:44:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 07:44:08.538+00:00
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T07:44:08.538Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760158028559,"cmd_timestamp_ms":1760157848559,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760158028559,"cmd_timestamp_ms":1760157848559,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 07:44:08.740+00:00
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T07:44:08.740Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760158028757,"cmd_timestamp_ms":1760157848757,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760158028757,"cmd_timestamp_ms":1760157848757,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 07:44:08.873+00:00
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T07:44:08.873Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760158028887,"cmd_timestamp_ms":1760157848887,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760158028887,"cmd_timestamp_ms":1760157848887,"source":"schedule"}
Oct 11 04:44:08 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 07:44:09.006+00:00
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T07:44:09.006Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760158029019,"cmd_timestamp_ms":1760157849019,"source":"schedule"}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760158029019,"cmd_timestamp_ms":1760157849019,"source":"schedule"}
Oct 11 04:44:09 IQ138000 wb-watchdog[5224]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 04:44:09 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 07:44:09.148+00:00
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T07:44:09.148Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760158029159,"cmd_timestamp_ms":1760157849159,"source":"schedule"}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760158029159,"cmd_timestamp_ms":1760157849159,"source":"schedule"}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 07:44:09.348+00:00
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T07:44:09.348Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760158029358,"cmd_timestamp_ms":1760157849358,"source":"schedule"}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760158029358,"cmd_timestamp_ms":1760157849358,"source":"schedule"}
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 04:44:09 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 04:44:10 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 04:44:10 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 04:44:10 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:10 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 04:44:10 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 04:44:10 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 04:44:10 IQ138000 wb-rules[4572]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 04:44:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:44:10 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:44:10 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:44:10 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:44:10 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 04:44:10 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 04:44:10 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 04:44:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:44:11 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:44:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:12 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:13 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:13 IQ138000 npm[3741]: [2025-10-11 04:44:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760157853958,"linkquality":51,"power_outage_count":25795,"pressure":993.6,"temperature":20.15,"voltage":3005}'
Oct 11 04:44:14 IQ138000 npm[3741]: [2025-10-11 04:44:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.37,"last_seen":1760157854016,"linkquality":51,"power_outage_count":25795,"pressure":993.6,"temperature":20.15,"voltage":3005}'
Oct 11 04:44:14 IQ138000 npm[3741]: [2025-10-11 04:44:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.37,"last_seen":1760157854016,"linkquality":51,"power_outage_count":25795,"pressure":993.8,"temperature":20.15,"voltage":3005}'
Oct 11 04:44:14 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:44:14 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:44:14 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:44:14 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:15 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:16 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:16 IQ138000 ModemManager[479]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 04:44:16 IQ138000 ModemManager[479]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 04:44:16 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 04:44:16 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:44:16 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:44:16 IQ138000 knxd[5370]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 04:44:16 IQ138000 knxd[5370]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 04:44:16 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:44:16 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 04:44:16 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 04:44:17 IQ138000 ModemManager[479]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 04:44:17 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:44:17 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:17 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:44:17 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:44:18 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 04:44:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:18 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 04:44:18 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 04:44:18 IQ138000 python3[1953]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 04:44:18 IQ138000 ModemManager[479]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7253] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7275] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7295] device (ttyUSB1): modem state 'enabling'
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7321] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7355] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7417] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7425] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:18 IQ138000 NetworkManager[404]: <info>  [1760157858.7450] manager: NetworkManager state is now CONNECTING
Oct 11 04:44:18 IQ138000 ModemManager[479]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 04:44:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:18 IQ138000 wb-mqtt-nm-helper[2018]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 04:44:18 IQ138000 ModemManager[479]: <info>  [modem0] power state updated: on
Oct 11 04:44:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:19 IQ138000 python3[1953]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:44:19 IQ138000 python3[1953]:    --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:44:19 IQ138000 python3[1953]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:44:19 IQ138000 python3[1953]:            |                model: A7602E-H
Oct 11 04:44:19 IQ138000 python3[1953]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:44:19 IQ138000 python3[1953]:            |            supported: gsm-umts
Oct 11 04:44:19 IQ138000 python3[1953]:            |              current: gsm-umts
Oct 11 04:44:19 IQ138000 python3[1953]:            |         equipment id: 860803062234204
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   System   |               device: wbc
Oct 11 04:44:19 IQ138000 python3[1953]:            |              drivers: option, rndis_host
Oct 11 04:44:19 IQ138000 python3[1953]:            |               plugin: simtech
Oct 11 04:44:19 IQ138000 python3[1953]:            |         primary port: ttyUSB1
Oct 11 04:44:19 IQ138000 python3[1953]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:44:19 IQ138000 python3[1953]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:44:19 IQ138000 python3[1953]:            |                state: enabling
Oct 11 04:44:19 IQ138000 python3[1953]:            |          power state: on
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:44:19 IQ138000 python3[1953]:            |              current: allowed: any; preferred: none
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   3GPP     |                 imei: 860803062234204
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:44:19 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:19 IQ138000 python3[1953]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:19 IQ138000 python3[1953]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:44:19 IQ138000 python3[1953]:            |                       slot 2: none
Oct 11 04:44:19 IQ138000 python3[1953]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 04:44:19 IQ138000 python3[1953]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 04:44:19 IQ138000 python3[1953]:  successfully requested primary SIM switch in modem
Oct 11 04:44:21 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 04:44:21 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 04:44:21 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 04:44:21 IQ138000 lsyncd[5427]: 04:44:21 Normal: --- Startup ---
Oct 11 04:44:21 IQ138000 lsyncd[5427]: 04:44:21 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 04:44:21 IQ138000 lsyncd[5427]: messages
Oct 11 04:44:21 IQ138000 lsyncd[5427]: iq_network_manager/iq_network_manager.log
Oct 11 04:44:21 IQ138000 lsyncd[5427]: journal
Oct 11 04:44:21 IQ138000 lsyncd[5429]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 04:44:21 IQ138000 lsyncd[5428]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 04:44:21 IQ138000 lsyncd[5428]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 04:44:21 IQ138000 lsyncd[5427]: 04:44:21 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 04:44:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 04:44:21 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 04:44:21 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 04:44:21 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 04:44:21 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:22 IQ138000 wb-rules[4572]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 04:44:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] simple connect started...
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (6/10): register
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 04:44:22 IQ138000 ModemManager[479]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 04:44:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:23 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 04:44:23 IQ138000 ModemManager[479]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 04:44:23 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 04:44:23 IQ138000 NetworkManager[404]: <info>  [1760157863.5597] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:23 IQ138000 NetworkManager[404]: <info>  [1760157863.5609] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 04:44:23 IQ138000 NetworkManager[404]: <info>  [1760157863.5643] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 04:44:23 IQ138000 NetworkManager[404]: <info>  [1760157863.5664] ppp-manager: starting PPP connection
Oct 11 04:44:23 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 04:44:23 IQ138000 NetworkManager[404]: <info>  [1760157863.5821] ppp-manager: pppd started with pid 5446
Oct 11 04:44:23 IQ138000 pppd[5446]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:44:23 IQ138000 NetworkManager[5446]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: initializing
Oct 11 04:44:23 IQ138000 pppd[5446]: pppd 2.4.9 started by root, uid 0
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 04:44:23 IQ138000 pppd[5446]: Using interface ppp0
Oct 11 04:44:23 IQ138000 NetworkManager[5446]: Using interface ppp0
Oct 11 04:44:23 IQ138000 NetworkManager[5446]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 04:44:23 IQ138000 pppd[5446]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 04:44:23 IQ138000 NetworkManager[404]: <info>  [1760157863.6543] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 04:44:23 IQ138000 pppd[5446]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 04:44:23 IQ138000 NetworkManager[5446]: PAP authentication succeeded
Oct 11 04:44:23 IQ138000 NetworkManager[5446]: kernel does not support PPP filtering
Oct 11 04:44:23 IQ138000 pppd[5446]: PAP authentication succeeded
Oct 11 04:44:23 IQ138000 pppd[5446]: kernel does not support PPP filtering
Oct 11 04:44:23 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 04:44:23 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 04:44:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:23 IQ138000 wb-rules[4572]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 04:44:23 IQ138000 ModemManager[479]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 04:44:24 IQ138000 pppd[5446]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:44:24 IQ138000 NetworkManager[5446]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 04:44:24 IQ138000 pppd[5446]: local  IP address 10.129.224.141
Oct 11 04:44:24 IQ138000 pppd[5446]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 04:44:24 IQ138000 NetworkManager[5446]: local  IP address 10.129.224.141
Oct 11 04:44:24 IQ138000 NetworkManager[5446]: remote IP address 10.64.64.64
Oct 11 04:44:24 IQ138000 NetworkManager[5446]: primary   DNS address 172.23.10.131
Oct 11 04:44:24 IQ138000 NetworkManager[5446]: secondary DNS address 172.23.10.130
Oct 11 04:44:24 IQ138000 pppd[5446]: remote IP address 10.64.64.64
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.2199] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 04:44:24 IQ138000 pppd[5446]: primary   DNS address 172.23.10.131
Oct 11 04:44:24 IQ138000 pppd[5446]: secondary DNS address 172.23.10.130
Oct 11 04:44:24 IQ138000 pppd[5446]: nm-ppp-plugin: ip-up event
Oct 11 04:44:24 IQ138000 pppd[5446]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.2325] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.2335] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.2367] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.2452] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 04:44:24 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:44:24 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.2897] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:24 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 04:44:24 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 04:44:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:44:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 04:44:24 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 04:44:24 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.3891] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.3915] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.3944] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.3996] device (ttyUSB1): Activation: successful, device activated.
Oct 11 04:44:24 IQ138000 NetworkManager[404]: <info>  [1760157864.4060] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 04:44:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 04:44:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:25 IQ138000 vnstatd[1653]: Info: Interface "ppp0" enabled.
Oct 11 04:44:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:25 IQ138000 ntpd[1644]: Listen normally on 4 ppp0 10.129.224.141:123
Oct 11 04:44:25 IQ138000 ntpd[1644]: new interface(s) found: waking up resolver
Oct 11 04:44:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 04:44:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 04:44:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 04:44:27 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 04:44:27 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 04:44:27 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 04:44:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 04:44:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 04:44:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 04:44:27 IQ138000 wb-mqtt-knx[1997]: INFO: knxd connected successfully
Oct 11 04:44:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 04:44:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:29 IQ138000 python3[1953]: Выполнение: mmcli -i any
Oct 11 04:44:29 IQ138000 python3[1953]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 04:44:29 IQ138000 python3[1953]:    -------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:29 IQ138000 python3[1953]:   -------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   Properties |            active: yes
Oct 11 04:44:29 IQ138000 python3[1953]:              |              imsi: 250997340491874
Oct 11 04:44:29 IQ138000 python3[1953]:              |             iccid: 8970199210429593744
Oct 11 04:44:29 IQ138000 python3[1953]:              |       operator id: 25099
Oct 11 04:44:29 IQ138000 python3[1953]:              |     operator name: Beeline
Oct 11 04:44:29 IQ138000 python3[1953]: Выполнение: mmcli -m wbc
Oct 11 04:44:29 IQ138000 python3[1953]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:44:29 IQ138000 python3[1953]:    --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:44:29 IQ138000 python3[1953]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:44:29 IQ138000 python3[1953]:            |                model: A7602E-H
Oct 11 04:44:29 IQ138000 python3[1953]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:44:29 IQ138000 python3[1953]:            |            supported: gsm-umts
Oct 11 04:44:29 IQ138000 python3[1953]:            |              current: gsm-umts
Oct 11 04:44:29 IQ138000 python3[1953]:            |         equipment id: 860803062234204
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   System   |               device: wbc
Oct 11 04:44:29 IQ138000 python3[1953]:            |              drivers: option, rndis_host
Oct 11 04:44:29 IQ138000 python3[1953]:            |               plugin: simtech
Oct 11 04:44:29 IQ138000 python3[1953]:            |         primary port: ttyUSB1
Oct 11 04:44:29 IQ138000 python3[1953]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:44:29 IQ138000 python3[1953]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:44:29 IQ138000 python3[1953]:            |                state: connected
Oct 11 04:44:29 IQ138000 python3[1953]:            |          power state: on
Oct 11 04:44:29 IQ138000 python3[1953]:            |          access tech: lte
Oct 11 04:44:29 IQ138000 python3[1953]:            |       signal quality: 93% (recent)
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:44:29 IQ138000 python3[1953]:            |              current: allowed: any; preferred: none
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   3GPP     |                 imei: 860803062234204
Oct 11 04:44:29 IQ138000 python3[1953]:            |          operator id: 25099
Oct 11 04:44:29 IQ138000 python3[1953]:            |        operator name: beeline
Oct 11 04:44:29 IQ138000 python3[1953]:            |         registration: home
Oct 11 04:44:29 IQ138000 python3[1953]:            | packet service state: attached
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:29 IQ138000 python3[1953]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:44:29 IQ138000 python3[1953]:            |                       slot 2: none
Oct 11 04:44:29 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:29 IQ138000 python3[1953]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:44:29 IQ138000 python3[1953]: Current state: home
Oct 11 04:44:29 IQ138000 python3[1953]: SIM registered in the network.
Oct 11 04:44:29 IQ138000 python3[1953]: Выполнение: mmcli -m wbc
Oct 11 04:44:30 IQ138000 python3[1953]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:44:30 IQ138000 python3[1953]:    --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:44:30 IQ138000 python3[1953]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:44:30 IQ138000 python3[1953]:            |                model: A7602E-H
Oct 11 04:44:30 IQ138000 python3[1953]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:44:30 IQ138000 python3[1953]:            |            supported: gsm-umts
Oct 11 04:44:30 IQ138000 python3[1953]:            |              current: gsm-umts
Oct 11 04:44:30 IQ138000 python3[1953]:            |         equipment id: 860803062234204
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   System   |               device: wbc
Oct 11 04:44:30 IQ138000 python3[1953]:            |              drivers: option, rndis_host
Oct 11 04:44:30 IQ138000 python3[1953]:            |               plugin: simtech
Oct 11 04:44:30 IQ138000 python3[1953]:            |         primary port: ttyUSB1
Oct 11 04:44:30 IQ138000 python3[1953]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:44:30 IQ138000 python3[1953]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:44:30 IQ138000 python3[1953]:            |                state: connected
Oct 11 04:44:30 IQ138000 python3[1953]:            |          power state: on
Oct 11 04:44:30 IQ138000 python3[1953]:            |          access tech: lte
Oct 11 04:44:30 IQ138000 python3[1953]:            |       signal quality: 93% (recent)
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:44:30 IQ138000 python3[1953]:            |              current: allowed: any; preferred: none
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   3GPP     |                 imei: 860803062234204
Oct 11 04:44:30 IQ138000 python3[1953]:            |          operator id: 25099
Oct 11 04:44:30 IQ138000 python3[1953]:            |        operator name: beeline
Oct 11 04:44:30 IQ138000 python3[1953]:            |         registration: home
Oct 11 04:44:30 IQ138000 python3[1953]:            | packet service state: attached
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:30 IQ138000 python3[1953]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:44:30 IQ138000 python3[1953]:            |                       slot 2: none
Oct 11 04:44:30 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:44:30 IQ138000 python3[1953]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:30 IQ138000 python3[1953]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:44:30 IQ138000 python3[1953]:    -------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:30 IQ138000 python3[1953]:   -------------------------------
Oct 11 04:44:30 IQ138000 python3[1953]:   Properties |            active: yes
Oct 11 04:44:30 IQ138000 python3[1953]:              |              imsi: 250997340491874
Oct 11 04:44:30 IQ138000 python3[1953]:              |             iccid: 8970199210429593744
Oct 11 04:44:30 IQ138000 python3[1953]:              |       operator id: 25099
Oct 11 04:44:30 IQ138000 python3[1953]:              |     operator name: Beeline
Oct 11 04:44:32 IQ138000 ntpd[1644]: Soliciting pool server 62.76.113.232
Oct 11 04:44:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 04:44:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:33 IQ138000 ntpd[1644]: Soliciting pool server 90.188.9.144
Oct 11 04:44:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:34 IQ138000 ntpd[1644]: Soliciting pool server 78.132.143.57
Oct 11 04:44:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 04:44:35 IQ138000 python3[1953]: Выполнение: mmcli -m wbc
Oct 11 04:44:35 IQ138000 python3[1953]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:44:35 IQ138000 python3[1953]:    --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:44:35 IQ138000 python3[1953]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:44:35 IQ138000 python3[1953]:            |                model: A7602E-H
Oct 11 04:44:35 IQ138000 python3[1953]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:44:35 IQ138000 python3[1953]:            |            supported: gsm-umts
Oct 11 04:44:35 IQ138000 python3[1953]:            |              current: gsm-umts
Oct 11 04:44:35 IQ138000 python3[1953]:            |         equipment id: 860803062234204
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   System   |               device: wbc
Oct 11 04:44:35 IQ138000 python3[1953]:            |              drivers: option, rndis_host
Oct 11 04:44:35 IQ138000 python3[1953]:            |               plugin: simtech
Oct 11 04:44:35 IQ138000 python3[1953]:            |         primary port: ttyUSB1
Oct 11 04:44:35 IQ138000 python3[1953]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:44:35 IQ138000 python3[1953]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:44:35 IQ138000 python3[1953]:            |                state: connected
Oct 11 04:44:35 IQ138000 python3[1953]:            |          power state: on
Oct 11 04:44:35 IQ138000 python3[1953]:            |          access tech: lte
Oct 11 04:44:35 IQ138000 python3[1953]:            |       signal quality: 93% (recent)
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:44:35 IQ138000 python3[1953]:            |              current: allowed: any; preferred: none
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   3GPP     |                 imei: 860803062234204
Oct 11 04:44:35 IQ138000 python3[1953]:            |          operator id: 25099
Oct 11 04:44:35 IQ138000 python3[1953]:            |        operator name: beeline
Oct 11 04:44:35 IQ138000 python3[1953]:            |         registration: home
Oct 11 04:44:35 IQ138000 python3[1953]:            | packet service state: attached
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:35 IQ138000 python3[1953]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:44:35 IQ138000 python3[1953]:            |                       slot 2: none
Oct 11 04:44:35 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:44:35 IQ138000 python3[1953]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:35 IQ138000 python3[1953]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:44:35 IQ138000 python3[1953]:    -------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:35 IQ138000 python3[1953]:   -------------------------------
Oct 11 04:44:35 IQ138000 python3[1953]:   Properties |            active: yes
Oct 11 04:44:35 IQ138000 python3[1953]:              |              imsi: 250997340491874
Oct 11 04:44:35 IQ138000 python3[1953]:              |             iccid: 8970199210429593744
Oct 11 04:44:35 IQ138000 python3[1953]:              |       operator id: 25099
Oct 11 04:44:35 IQ138000 python3[1953]:              |     operator name: Beeline
Oct 11 04:44:35 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 04:44:35 IQ138000 ntpd[1644]: Soliciting pool server 193.192.36.3
Oct 11 04:44:36 IQ138000 ntpd[1644]: Soliciting pool server 2a02:6bf:f000:1:2::2
Oct 11 04:44:37 IQ138000 ntpd[1644]: Soliciting pool server 5.23.48.22
Oct 11 04:44:38 IQ138000 ntpd[1644]: Soliciting pool server 45.141.102.99
Oct 11 04:44:39 IQ138000 ntpd[1644]: Soliciting pool server 92.255.126.1
Oct 11 04:44:40 IQ138000 python3[1953]: Выполнение: mmcli -m wbc
Oct 11 04:44:40 IQ138000 python3[1953]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 04:44:40 IQ138000 python3[1953]:    --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 04:44:40 IQ138000 python3[1953]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   Hardware |         manufacturer: INCORPORATED
Oct 11 04:44:40 IQ138000 python3[1953]:            |                model: A7602E-H
Oct 11 04:44:40 IQ138000 python3[1953]:            |    firmware revision: A50C4B08A7600M7
Oct 11 04:44:40 IQ138000 python3[1953]:            |            supported: gsm-umts
Oct 11 04:44:40 IQ138000 python3[1953]:            |              current: gsm-umts
Oct 11 04:44:40 IQ138000 python3[1953]:            |         equipment id: 860803062234204
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   System   |               device: wbc
Oct 11 04:44:40 IQ138000 python3[1953]:            |              drivers: option, rndis_host
Oct 11 04:44:40 IQ138000 python3[1953]:            |               plugin: simtech
Oct 11 04:44:40 IQ138000 python3[1953]:            |         primary port: ttyUSB1
Oct 11 04:44:40 IQ138000 python3[1953]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 04:44:40 IQ138000 python3[1953]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 04:44:40 IQ138000 python3[1953]:            |                state: connected
Oct 11 04:44:40 IQ138000 python3[1953]:            |          power state: on
Oct 11 04:44:40 IQ138000 python3[1953]:            |          access tech: lte
Oct 11 04:44:40 IQ138000 python3[1953]:            |       signal quality: 93% (recent)
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 04:44:40 IQ138000 python3[1953]:            |              current: allowed: any; preferred: none
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   3GPP     |                 imei: 860803062234204
Oct 11 04:44:40 IQ138000 python3[1953]:            |          operator id: 25099
Oct 11 04:44:40 IQ138000 python3[1953]:            |        operator name: beeline
Oct 11 04:44:40 IQ138000 python3[1953]:            |         registration: home
Oct 11 04:44:40 IQ138000 python3[1953]:            | packet service state: attached
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:40 IQ138000 python3[1953]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 04:44:40 IQ138000 python3[1953]:            |                       slot 2: none
Oct 11 04:44:40 IQ138000 python3[1953]:   --------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 04:44:40 IQ138000 python3[1953]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:40 IQ138000 python3[1953]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 04:44:40 IQ138000 python3[1953]:    -------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 04:44:40 IQ138000 python3[1953]:   -------------------------------
Oct 11 04:44:40 IQ138000 python3[1953]:   Properties |            active: yes
Oct 11 04:44:40 IQ138000 python3[1953]:              |              imsi: 250997340491874
Oct 11 04:44:40 IQ138000 python3[1953]:              |             iccid: 8970199210429593744
Oct 11 04:44:40 IQ138000 python3[1953]:              |       operator id: 25099
Oct 11 04:44:40 IQ138000 python3[1953]:              |     operator name: Beeline
Oct 11 04:44:40 IQ138000 ntpd[1644]: Soliciting pool server 178.186.166.30
Oct 11 04:44:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
-- Boot 9c9bec9d360244f9b7997c90d2661391 --
Oct 11 05:09:10 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:09:10 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:09:10 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:09:10 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:09:10 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:09:10 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:09:10 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:09:10 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:09:10 IQ138000 kernel: Zone ranges:
Oct 11 05:09:10 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:09:10 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:09:10 IQ138000 kernel: Movable zone start for each node
Oct 11 05:09:10 IQ138000 kernel: Early memory node ranges
Oct 11 05:09:10 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:09:10 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:09:10 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:09:10 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:09:10 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:09:10 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:09:10 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:09:10 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:09:10 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:09:10 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:09:10 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:09:10 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:09:10 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:09:10 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:09:10 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:09:10 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:09:10 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:09:10 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:09:10 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:09:10 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:09:10 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:09:10 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:09:10 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:09:10 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:09:10 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:09:10 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:09:10 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:09:10 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:09:10 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:09:10 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:09:10 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:09:10 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:09:10 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:09:10 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:09:10 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:09:10 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:09:10 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:09:10 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:09:10 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:09:10 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:09:10 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:09:10 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:09:10 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:09:10 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:09:10 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:09:10 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:09:10 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:09:10 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:09:10 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:09:10 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:09:10 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:09:10 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:09:10 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:09:10 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:09:10 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:09:10 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:09:10 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:09:10 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:09:10 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:09:10 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:09:10 IQ138000 kernel: No ATAGs?
Oct 11 05:09:10 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:09:10 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:09:10 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:09:10 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:09:10 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:09:10 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:09:10 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:09:10 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:09:10 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:09:10 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:09:10 IQ138000 kernel: PTP clock support registered
Oct 11 05:09:10 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:09:10 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:09:10 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:09:10 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:09:10 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:09:10 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:09:10 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:09:10 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:09:10 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:09:10 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:09:10 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:09:10 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:09:10 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:09:10 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:09:10 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:09:10 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:09:10 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:09:10 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:09:10 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:09:10 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:09:10 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:09:10 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:09:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:09:10 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:09:10 IQ138000 kernel: brd: module loaded
Oct 11 05:09:10 IQ138000 kernel: loop: module loaded
Oct 11 05:09:10 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:09:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:09:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:09:10 IQ138000 kernel: CAN device driver interface
Oct 11 05:09:10 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:09:10 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:09:10 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:09:10 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:09:10 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:09:10 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:09:10 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:09:10 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:09:10 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:09:10 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:09:10 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:09:10 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:09:10 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:09:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:09:10 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:09:10 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:09:10 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:09:10 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:09:10 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:09:10 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:09:10 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:09:10 IQ138000 kernel: can: controller area network core
Oct 11 05:09:10 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:09:10 IQ138000 kernel: can: raw protocol
Oct 11 05:09:10 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:09:10 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:09:10 IQ138000 kernel: can: SAE J1939
Oct 11 05:09:10 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:09:10 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:09:10 IQ138000 kernel: registered taskstats version 1
Oct 11 05:09:10 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:09:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:09:10 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:09:10 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:09:10 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:09:10 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:09:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:09:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:09:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:09:06 UTC (1760159346)
Oct 11 05:09:10 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:09:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:09:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:09:10 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:09:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:09:10 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:09:10 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:09:10 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:09:10 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:09:10 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:09:10 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:09:10 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:09:10 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:09:10 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:09:10 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: random: fast init done
Oct 11 05:09:10 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:09:10 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:09:10 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:09:10 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:09:10 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:09:10 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:09:10 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:09:10 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:09:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:09:10 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:09:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:09:10 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:09:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:09:10 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:09:10 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:09:10 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:09:10 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:09:10 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:09:10 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:09:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:09:10 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:09:10 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:09:10 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:09:10 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:09:10 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:09:10 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:09:10 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:09:10 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:09:10 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:09:10 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:09:10 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:09:10 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:09:10 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:09:10 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:09:10 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:09:10 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:09:10 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:09:10 IQ138000 kernel: of_cfs_init
Oct 11 05:09:10 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:09:10 IQ138000 kernel: ALSA device list:
Oct 11 05:09:10 IQ138000 kernel:   No soundcards found.
Oct 11 05:09:10 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:09:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:09:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:09:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:09:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:09:10 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:09:10 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:09:10 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:09:10 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:09:10 IQ138000 kernel:   with arguments:
Oct 11 05:09:10 IQ138000 kernel:     /sbin/init
Oct 11 05:09:10 IQ138000 kernel:   with environment:
Oct 11 05:09:10 IQ138000 kernel:     HOME=/
Oct 11 05:09:10 IQ138000 kernel:     TERM=linux
Oct 11 05:09:10 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:09:10 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:09:10 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:09:10 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:09:10 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:09:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:09:10 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:09:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:09:10 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:09:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:09:10 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:09:10 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:09:10 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:09:10 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:09:10 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:09:10 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:09:10 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:09:10 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:09:10 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:09:10 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:09:10 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:09:10 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:09:10 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:09:10 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:09:10 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:09:10 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:09:10 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:09:10 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:09:10 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:09:10 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:09:10 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:09:10 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:09:10 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:09:10 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:09:10 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:09:10 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:09:10 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:09:10 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:09:10 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:09:10 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:09:10 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:09:10 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:09:10 IQ138000 systemd-journald[139]: Journal started
Oct 11 05:09:10 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:09:10 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:09:10 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:09:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:09:10 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:09:10 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:09:10 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:09:10 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:09:10 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:09:10 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:09:11 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:09:11 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:09:11 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:09:11 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:09:11 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:09:11 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:09:11 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:09:11 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:09:11 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:09:11 IQ138000 systemd-udevd[154]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:09:11 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:09:11 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:09:11 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:09:11 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:09:11 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 05:09:11 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:09:12 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:09:12 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:09:12 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:09:12 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:09:12 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:09:12 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:09:12 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:09:12 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:09:12 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:09:12 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:09:12 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 05:09:12 IQ138000 systemd-udevd[161]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:09:12 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:09:12 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:09:12 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:09:12 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:09:12 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:09:12 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:09:12 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:09:12 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:09:12 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:09:13 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:09:13 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:09:13 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:09:13 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:09:13 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:09:13 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:09:13 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:09:13 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:09:13 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:09:13 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:09:13 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:09:13 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:09:13 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:09:13 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:09:13 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:09:13 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:09:13 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:09:13 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:09:13 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:09:13 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:09:13 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 05:09:13 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 05:09:13 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:09:13 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:09:13 IQ138000 systemd-fsck[205]: data: recovering journal
Oct 11 05:09:13 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:09:13 IQ138000 systemd-fsck[205]: data: clean, 16450/328656 files, 373376/1313536 blocks
Oct 11 05:09:13 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:09:13 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:09:13 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:09:13 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:09:13 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:09:13 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:09:13 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:09:13 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:09:13 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:09:13 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.072ms for 461 entries.
Oct 11 05:09:13 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 504.4M, max 496.6M, 0B free.
Oct 11 05:09:13 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:09:13 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 05:09:13 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:09:14 IQ138000 kernel: random: crng init done
Oct 11 05:09:14 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:09:14 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:09:14 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:09:14 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:09:14 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:09:14 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:09:14 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:09:14 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:09:14 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:09:14 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:09:14 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:09:14 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:09:14 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:09:14 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:09:14 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:09:15 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:09:15 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:09:15 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:09:15 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:09:15 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:09:15 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:09:15 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:09:15 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:09:15 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:09:15 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:09:15 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:09:15 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:09:15 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:09:15 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:09:15 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:09:15 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 05:09:15 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:09:15 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:09:15 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:09:15 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:09:15 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:09:15 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 05:09:15 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:09:15 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:09:15 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:09:15 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 05:09:15 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:09:15 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:09:15 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:09:15 IQ138000 wb-watchdog[323]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:09:15 IQ138000 migrate.sh[324]: Error: No such file or directory
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:09:15 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:09:15 IQ138000 migrate.sh[336]: Error: No such file or directory
Oct 11 05:09:15 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:09:15 IQ138000 reverse-ssh.sh[343]: Error: No such file or directory
Oct 11 05:09:15 IQ138000 migrate.sh[348]: Error: No such file or directory
Oct 11 05:09:15 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:09:15 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:09:15 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:09:15 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:09:15 IQ138000 migrate.sh[355]: Error: No such file or directory
Oct 11 05:09:15 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:09:15 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:09:16 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:09:16 IQ138000 rules-preprocessor[337]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:09:16 IQ138000 rules-preprocessor[337]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:09:16 IQ138000 migrate.sh[367]: Error: No such file or directory
Oct 11 05:09:16 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:09:16 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Successfully dropped root privileges.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: avahi-daemon 0.8 starting up.
Oct 11 05:09:16 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Successfully called chroot().
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Successfully dropped remaining capabilities.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: No service file found in /etc/avahi/services.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:09:16 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Network interface enumeration completed.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Registering new address record for ::1 on lo.*.
Oct 11 05:09:16 IQ138000 avahi-daemon[369]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:09:16 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 05:09:16 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:09:16 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:09:16 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:09:16 IQ138000 systemd-logind[347]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:09:16 IQ138000 systemd-logind[347]: New seat seat0.
Oct 11 05:09:16 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:09:16 IQ138000 wpa_supplicant[381]: Successfully initialized wpa_supplicant
Oct 11 05:09:16 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:09:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:09:16 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:09:16 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:09:16 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:16 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:09:16 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:09:16 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:09:16 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:09:16 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:09:16 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:16 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:09:16 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:09:16 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:09:16 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:09:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:09:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:09:16 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:09:16 IQ138000 NetworkManager[403]: <info>  [1760159356.8103] NetworkManager (version 1.42.4) is starting... (boot:9c9bec9d-3602-44f9-b799-7c90d2661391)
Oct 11 05:09:16 IQ138000 NetworkManager[403]: <info>  [1760159356.8133] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:09:16 IQ138000 NetworkManager[403]: <info>  [1760159356.8254] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:09:16 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:09:16 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:09:16 IQ138000 NetworkManager[403]: <info>  [1760159356.8793] manager[0x6c6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:09:16 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:09:16 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 05:09:16 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:09:16 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:09:16 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:09:17 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:09:17 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:09:17 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:09:17 IQ138000 avahi-daemon[369]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1851450877.
Oct 11 05:09:17 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:09:17 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:09:17 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:09:17 IQ138000 ModemManager[477]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:09:17 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:09:17 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.5745] hostname: hostname: using hostnamed
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.5748] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.5786] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.5868] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.5890] manager[0x6c6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.5892] manager[0x6c6900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6213] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6321] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6374] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6635] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6706] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6751] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6764] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6783] manager: Networking is enabled by state file
Oct 11 05:09:17 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6849] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6852] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6854] ifupdown: management mode: unmanaged
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6855] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.6857] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:09:17 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:09:17 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.7646] dhcp: init: Using DHCP client 'internal'
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.7671] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.7878] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.7990] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:09:17 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:09:17 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.8147] device (lo): Activation: starting connection 'lo' (b28aa307-a5b9-4ceb-ad56-9952beabff70)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.8237] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:09:17 IQ138000 NetworkManager[403]: <info>  [1760159357.8335] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.1987] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.2011] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.2044] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.2180] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:09:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:09:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:09:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:09:18 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:09:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.4279] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.4330] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.4409] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:09:18 IQ138000 NetworkManager[403]: <info>  [1760159358.4434] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.2336] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.2383] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.2404] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.2935] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.2970] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.2996] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.3074] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.3512] modem-manager: ModemManager available
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.3547] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.3573] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.3625] device (lo): Activation: successful, device activated.
Oct 11 05:09:19 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.5904] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.5922] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.5955] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.5990] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6072] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6097] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6136] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6167] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6240] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6345] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6379] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:09:19 IQ138000 NetworkManager[403]: <info>  [1760159359.6456] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:20 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:09:20 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:09:20 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:09:23 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:09:23 IQ138000 init.sh[1317]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:09:23 IQ138000 init.sh[1332]: In file included from -:16:
Oct 11 05:09:23 IQ138000 init.sh[1332]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:23 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:09:23 IQ138000 init.sh[1317]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:09:23 IQ138000 init.sh[1317]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:09:23 IQ138000 init.sh[1392]: In file included from -:11:
Oct 11 05:09:23 IQ138000 init.sh[1392]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:23 IQ138000 init.sh[1317]: ...
Oct 11 05:09:23 IQ138000 init.sh[1407]: In file included from -:11:
Oct 11 05:09:23 IQ138000 init.sh[1407]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:24 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 05:09:24 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 05:09:24 IQ138000 init.sh[1317]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:09:24 IQ138000 init.sh[1427]: In file included from -:24:
Oct 11 05:09:24 IQ138000 init.sh[1427]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:24 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:09:24 IQ138000 init.sh[1317]: ...
Oct 11 05:09:24 IQ138000 init.sh[1442]: In file included from -:24:
Oct 11 05:09:24 IQ138000 init.sh[1442]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:25 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 05:09:25 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 05:09:25 IQ138000 init.sh[1317]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:09:25 IQ138000 init.sh[1464]: In file included from -:11:
Oct 11 05:09:25 IQ138000 init.sh[1464]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:25 IQ138000 init.sh[1317]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:09:25 IQ138000 init.sh[1488]: In file included from -:11:
Oct 11 05:09:25 IQ138000 init.sh[1488]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:09:25 IQ138000 init.sh[1317]: ...
Oct 11 05:09:25 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:09:25 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:09:25 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:09:25 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:09:25 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:09:26 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:09:26 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:09:26 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:09:26 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:09:26 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:09:26 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:09:26 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:09:26 IQ138000 lsyncd[1607]: 05:09:26 Normal: --- Startup ---
Oct 11 05:09:26 IQ138000 knxd[1601]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:09:26 IQ138000 knxd[1601]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:09:26 IQ138000 lsyncd[1607]: 05:09:26 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:09:26 IQ138000 lsyncd[1607]: iq_network_manager/iq_network_manager.log
Oct 11 05:09:26 IQ138000 lsyncd[1607]: journal
Oct 11 05:09:26 IQ138000 lsyncd[1607]: messages
Oct 11 05:09:26 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:09:26 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:09:26 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:09:26 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:09:26 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:09:26 IQ138000 ntpd[1620]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:09:26 IQ138000 ntpd[1620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:09:26 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:09:26 IQ138000 lsyncd[1623]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:09:26 IQ138000 ntpd[1620]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:09:26 IQ138000 ntpd[1620]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:09:26 IQ138000 ntpd[1620]: corporation.  Support and training for ntp-4 are
Oct 11 05:09:26 IQ138000 ntpd[1620]: available at https://www.nwtime.org/support
Oct 11 05:09:26 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:09:26 IQ138000 lsyncd[1619]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:09:26 IQ138000 lsyncd[1619]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:09:26 IQ138000 lsyncd[1607]: 05:09:26 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:09:26 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:09:26 IQ138000 ntpd[1643]: proto: precision = 1.083 usec (-20)
Oct 11 05:09:26 IQ138000 ntpd[1643]: basedate set to 2020-09-11
Oct 11 05:09:26 IQ138000 ntpd[1643]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:09:26 IQ138000 ntpd[1643]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:09:26 IQ138000 persist_meter_data.sh[1641]: Error: No such file or directory
Oct 11 05:09:26 IQ138000 ntpd[1643]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:09:26 IQ138000 ntpd[1643]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:09:26 IQ138000 ntpd[1643]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:09:26 IQ138000 ntpd[1643]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:09:26 IQ138000 ntpd[1643]: Listen normally on 3 lo [::1]:123
Oct 11 05:09:26 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:09:26 IQ138000 ntpd[1643]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:09:26 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:09:26 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:09:26 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:09:26 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:09:26 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:09:26 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:09:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:09:27 IQ138000 wb-mqtt-w1[1673]: MQTT broker localhost:1883
Oct 11 05:09:27 IQ138000 wb-mqtt-w1[1673]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:27 IQ138000 wb-mqtt-w1[1673]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:09:27 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:09:27 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:09:27 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:09:27 IQ138000 wb-mqtt-w1[1673]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:09:27 IQ138000 wb-mqtt-w1[1673]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:09:27 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:09:27 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:09:27 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:09:27 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:27 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:09:27 IQ138000 wb-knxd-config.sh[1514]: No /dev/ttyKNX found, disabling level2
Oct 11 05:09:27 IQ138000 wb-knxd-config.sh[1514]: Restart knxd
Oct 11 05:09:27 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:09:27 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:09:27 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:09:27 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:27 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:09:27 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:09:27 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:09:27 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:09:27 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:09:27 IQ138000 wb-connection-manager[1503]: Connection LegacyWiFi not found, skipping
Oct 11 05:09:27 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:09:27 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:09:27 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:09:27 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:09:27 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:09:27 IQ138000 ntpd[1643]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:09:27 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:09:27 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:09:27 IQ138000 wb-connection-manager[1503]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:09:27 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:09:27 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:27 IQ138000 wb-connection-manager[1503]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:09:27 IQ138000 sshd[1722]: Server listening on 0.0.0.0 port 22.
Oct 11 05:09:27 IQ138000 sshd[1722]: Server listening on :: port 22.
Oct 11 05:09:27 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:09:27 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:09:27 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:09:27 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:09:27 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:09:27 IQ138000 vnstatd[1649]: Info: vnStat daemon 2.6 started. (pid:1649 uid:110 gid:117 64-bit)
Oct 11 05:09:27 IQ138000 vnstatd[1649]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:09:28 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:09:28 IQ138000 vnstatd[1649]: Info: Interface "ppp0" disabled.
Oct 11 05:09:28 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:09:28 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:09:28 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:09:28 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:09:28 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <error> [1760159368.3236] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.3239] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1503 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:09:28 IQ138000 wb-connection-manager[1503]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:09:28 IQ138000 reverse-ssh.sh[1831]: Error: No such file or directory
Oct 11 05:09:28 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:28 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:09:28 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:09:28 IQ138000 wb-adjust-systime[1818]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:09:28 IQ138000 wpa_supplicant[381]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:09:28 IQ138000 ntpd[1643]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:09:28 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:09:28 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:28 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:09:28 IQ138000 mosquitto[1853]: 1760159368: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:09:28 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:09:28 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:09:28 IQ138000 knxd[1881]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:09:28 IQ138000 knxd[1881]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:09:28 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:09:28 IQ138000 wb-adjust-systime[1818]: Drift file is valid (was recently edited)
Oct 11 05:09:28 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.8918] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.8948] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1503 uid=0 result="success"
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.8989] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.9062] manager: NetworkManager state is now CONNECTING
Oct 11 05:09:28 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.9188] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.9532] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:09:28 IQ138000 NetworkManager[403]: <info>  [1760159368.9767] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:29 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.0651] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.0815] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:29 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.1171] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.1214] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.1291] Config: added 'scan_ssid' value '1'
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.1305] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.1342] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.1354] Config: added 'psk' value '<hidden>'
Oct 11 05:09:29 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:09:29 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.3463] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:09:29 IQ138000 NetworkManager[403]: <info>  [1760159369.3466] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: MQTT broker localhost:1883
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:09:29 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:09:29 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:29 IQ138000 ntpd[1643]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:09:29 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:09:29 IQ138000 wb-mqtt-logs[1971]: MQTT broker localhost:1883
Oct 11 05:09:29 IQ138000 wb-mqtt-logs[1971]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:29 IQ138000 wb-mqtt-logs[1971]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] Create indices if necessary
Oct 11 05:09:29 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] Analyzing data table
Oct 11 05:09:29 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:09:29 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:09:29 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:09:30 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:09:30 IQ138000 wb-mqtt-confed[1935]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:09:30 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:09:30 IQ138000 wb-mqtt-confed[1935]: INFO: [wbgo_mqtt] confed-IQ138000-1935: MQTT connection established
Oct 11 05:09:30 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.533s CPU time.
Oct 11 05:09:30 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:09:30 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:30 IQ138000 ntpd[1643]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:30 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:30 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:09:30 IQ138000 wb-mqtt-iec104[1963]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:09:30 IQ138000 wb-mqtt-mbgate[1977]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:09:30 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:09:30 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:09:30 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:09:31 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:09:31 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:09:31 IQ138000 wb-mqtt-logs[1971]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:31 IQ138000 wb-mqtt-logs[1971]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:31 IQ138000 wb-mqtt-logs[1971]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:31 IQ138000 wb-mqtt-logs[1971]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[1999]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:09:31 IQ138000 wb-mqtt-iec104[2139]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:09:31 IQ138000 wb-mqtt-knx[2124]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:31 IQ138000 wb-mqtt-knx[2124]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:09:31 IQ138000 wb-mqtt-gpio[1846]: INFO: [gpio driver] Started
Oct 11 05:09:31 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:09:31 IQ138000 wb-mqtt-opcua[2195]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:09:32 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:09:32 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:09:32 IQ138000 wb-mqtt-opcua[2195]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:09:32 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:09:32 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:09:32 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:32 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:09:32 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:09:32 IQ138000 wb-mqtt-iec104[2139]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:09:32 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:09:34 IQ138000 python3[1906]: No data file found at /tmp/network_status_cache.json
Oct 11 05:09:34 IQ138000 wb-mqtt-knx[2124]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:34 IQ138000 wb-mqtt-knx[2124]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:34 IQ138000 wb-mqtt-knx[2124]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:34 IQ138000 python3[1906]: Connecting to MQTT
Oct 11 05:09:34 IQ138000 wb-mqtt-knx[2124]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:09:34 IQ138000 wb-mqtt-knx[2124]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:09:34 IQ138000 python3[1906]: Connected to MQTT
Oct 11 05:09:34 IQ138000 python3[1906]: Connection returned result: Connection Accepted.
Oct 11 05:09:34 IQ138000 NetworkManager[403]: <info>  [1760159374.8108] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:09:34 IQ138000 NetworkManager[403]: <info>  [1760159374.8168] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:09:35 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=1992 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New virtual device lo b28aa307-a5b9-4ceb-ad56-9952beabff70 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:09:35 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:09:36 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New active connection lo b28aa307-a5b9-4ceb-ad56-9952beabff70 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:09:36 IQ138000 wb-device-manager[1918]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:09:36 IQ138000 wb-device-manager[1918]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:09:36 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:36 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:38 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:09:38 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:09:38 IQ138000 kernel: dldo4: disabling
Oct 11 05:09:38 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:09:38 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:09:38 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:09:38 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:09:38 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:09:38 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:09:38 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: MQTT broker localhost:1883
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:09:38 IQ138000 wb-mqtt-adc[3134]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:09:39 IQ138000 wb-mqtt-confed[1935]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:09:39 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:09:40 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:09:40 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:09:40 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:09:40 IQ138000 wb-mqtt-serial[1660]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:09:40 IQ138000 wb-gsm[3320]: main: Called from pid 1 (systemd)
Oct 11 05:09:40 IQ138000 wb-gsm[3361]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:09:40 IQ138000 wb-usb-otg-start.sh[3374]: : wb-usb-otg-start
Oct 11 05:09:40 IQ138000 wb-usb-otg-start.sh[3374]: main: setup_device()
Oct 11 05:09:40 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:40 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:09:40 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:09:40 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:09:40 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:09:40 IQ138000 kernel: using random self ethernet address
Oct 11 05:09:40 IQ138000 kernel: using random host ethernet address
Oct 11 05:09:40 IQ138000 wb-usb-otg-start.sh[3374]: main: enabling profile rndis
Oct 11 05:09:40 IQ138000 knxd[3404]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:09:40 IQ138000 knxd[3404]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:09:40 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:09:40 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:40 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:09:40 IQ138000 wb-gsm[3425]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:09:41 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:09:41 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:09:41 IQ138000 systemd-udevd[3391]: Using default interface naming scheme 'v247'.
Oct 11 05:09:41 IQ138000 NetworkManager[403]: <info>  [1760159381.0795] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:09:41 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:09:41 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] DB initialization is done
Oct 11 05:09:41 IQ138000 NetworkManager[403]: <info>  [1760159381.2685] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:09:41 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:09:41 IQ138000 wb-gsm[3501]: should_enable: Should enable GSM modem
Oct 11 05:09:41 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 484)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 491)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 498)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 511)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 524)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 537)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 550)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 563)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 576)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:09:41 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:09:42 IQ138000 wb-gsm[3576]: main: Called from pid 3502 (wb-gsm-mm)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: DB logger started, go to main loop
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:09:42 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:09:42 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:09:43 IQ138000 wb-gsm[3591]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:09:43 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:09:43 IQ138000 wb-gsm[3615]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:09:43 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:09:43 IQ138000 NetworkManager[403]: <info>  [1760159383.4406] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:09:43 IQ138000 NetworkManager[403]: <info>  [1760159383.4409] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:09:43 IQ138000 ModemManager[477]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:09:43 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:09:44 IQ138000 python3[1906]: Выполнение: service wb-connection-manager stop
Oct 11 05:09:44 IQ138000 npm[1676]: > zigbee2mqtt@2.1.1 start
Oct 11 05:09:44 IQ138000 npm[1676]: > node index.js
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:09:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:09:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:09:46 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:09:46 IQ138000 npm[3718]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-gsm[3999]: mm_off: Modem is already OFF
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:09:47 IQ138000 wb-gsm[4070]: main: Called from pid 3502 (wb-gsm-mm)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:09:47 IQ138000 wb-gsm[4081]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:09:47 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:09:48 IQ138000 wb-gsm[4104]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:09:48 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:09:48 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:09:48 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:09:48 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:48 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:48 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:09:49 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:09:50 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:51 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:09:51 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:51 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:51 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:09:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:51 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:51 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:51 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:09:51 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:51 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:09:51 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:09:51 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:09:51 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:09:51 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:09:51 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:09:51 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:09:52 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:09:52 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:09:52 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:09:52 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:09:52 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:09:52 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: MQTT broker localhost:1883
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:09:52 IQ138000 knxd[4495]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:09:52 IQ138000 knxd[4495]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:09:52 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:09:52 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:09:52 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: w1 thread Started
Oct 11 05:09:52 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:09:52 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:09:52 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:09:52 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:09:52 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:09:52 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.216s CPU time.
Oct 11 05:09:52 IQ138000 python3[1906]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:09:52 IQ138000 python3[1906]:  
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:09:52 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:53 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <warn>  [1760159394.5282] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <info>  [1760159394.5284] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <info>  [1760159394.5372] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <warn>  [1760159394.5432] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <info>  [1760159394.5446] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:09:54 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:09:54 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <info>  [1760159394.5822] manager: startup complete
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <info>  [1760159394.5834] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:09:54 IQ138000 NetworkManager[403]: <info>  [1760159394.5836] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:09:54 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:09:54 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:09:54 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:09:54 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:09:54 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:54 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:55 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:55 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:09:55 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:55 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:09:56 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:57 IQ138000 python3[1906]: Выполнение: mmcli -m wbc
Oct 11 05:09:57 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:09:57 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:09:57 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:09:57 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:09:57 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:09:57 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:09:57 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:09:57 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:09:57 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:09:57 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:09:57 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:09:57 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:09:57 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:09:57 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:09:57 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:09:57 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:09:57 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:57 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:09:57 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:09:57 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:57 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:09:57 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:09:57 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:09:57 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:09:57 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:09:57 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:57 IQ138000 watchdog[4628]: starting daemon (5.16):
Oct 11 05:09:57 IQ138000 watchdog[4628]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:09:57 IQ138000 watchdog[4628]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:09:57 IQ138000 watchdog[4628]:  ping: no machine to check
Oct 11 05:09:57 IQ138000 watchdog[4628]:  file: no file to check
Oct 11 05:09:57 IQ138000 watchdog[4628]:  pidfile: /var/run/sshd.pid
Oct 11 05:09:57 IQ138000 watchdog[4628]:  interface: no interface to check
Oct 11 05:09:57 IQ138000 watchdog[4628]:  temperature: no sensors to check
Oct 11 05:09:57 IQ138000 watchdog[4628]:  no test binary files
Oct 11 05:09:57 IQ138000 watchdog[4628]:  no repair binary files
Oct 11 05:09:57 IQ138000 watchdog[4628]:  error retry time-out = 30 seconds
Oct 11 05:09:58 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:09:57 IQ138000 watchdog[4628]:  repair attempts = 1
Oct 11 05:09:58 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:09:57 IQ138000 watchdog[4628]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:09:57 IQ138000 watchdog[4628]: watchdog now set to 120 seconds
Oct 11 05:09:57 IQ138000 watchdog[4628]: hardware watchdog identity: WBEC WDT
Oct 11 05:09:58 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:09:58 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:09:58 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:09:58 IQ138000 systemd[1]: Startup finished in 3.786s (kernel) + 49.806s (userspace) = 53.592s.
Oct 11 05:09:58 IQ138000 wb-rules[4612]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:09:58 IQ138000 wb-rules[4612]: INFO: driver is created
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:09:58 IQ138000 wb-rules[4612]: INFO: [wbgo_mqtt] rules-IQ138000-4612: MQTT connection established
Oct 11 05:09:58 IQ138000 wb-rules[4612]: INFO: driver loop is started
Oct 11 05:09:58 IQ138000 wb-rules[4612]: INFO: wait for driver to become ready
Oct 11 05:09:58 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:09:58 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:09:59 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-rules[4612]: INFO: driver is ready
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-rules[4612]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:10:00 IQ138000 wb-rules[4612]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4612: MQTT connection established
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-rules[4612]: INFO: [engine] Starting main loop
Oct 11 05:10:00 IQ138000 wb-rules[4612]: INFO: the engine is ready
Oct 11 05:10:00 IQ138000 wb-rules[4612]: INFO: [engine] Starting sync loop
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:00 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:10:01 IQ138000 NetworkManager[403]: <info>  [1760159401.3088] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:10:01 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:10:01 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 9e:db:80:21:ab:f5
Oct 11 05:10:01 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:10:01 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:10:01 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:01 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:10:01 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:10:01 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:10:01 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:10:01 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:10:01 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:10:01 IQ138000 systemd-udevd[4876]: Using default interface naming scheme 'v247'.
Oct 11 05:10:01 IQ138000 systemd-udevd[4876]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-rules[4612]: WARNING: [rule warning] DAC: no config file
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:01 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:01 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:10:01 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:10:02 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:10:02 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:10:02 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:10:02 IQ138000 knxd[4995]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:10:02 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:10:02 IQ138000 knxd[4995]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:10:02 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:02 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:03 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:10:03 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:03 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:03 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:10:03 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:04 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:04 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:04 IQ138000 python3[1906]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:10:04 IQ138000 wb-gsm[5022]: mm_on: Waiting for modem to start
Oct 11 05:10:04 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:04 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:10:04 IQ138000 wb-rules[4612]: INFO: all rule files are loaded
Oct 11 05:10:04 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:04 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:04 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:05 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:10:05 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:06 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:06 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:10:07 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:07 IQ138000 npm[3718]: [2025-10-11 05:10:07] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:10:07 IQ138000 npm[3718]: [2025-10-11 05:10:07] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:07 IQ138000 npm[3718]: [2025-10-11 05:10:07] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:10:07 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:08 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:08 IQ138000 npm[3718]: [2025-10-11 05:10:08] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:10:08 IQ138000 npm[3718]: [2025-10-11 05:10:08] info:         zh:zstack:znp: Serialport opened
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:08 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:10:09 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:09 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:10:10 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:10:10 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:11 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:10:11 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: Currently 4 devices are joined.
Oct 11 05:10:11 IQ138000 npm[3718]: [2025-10-11 05:10:11] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:10:11 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:10:11.971+00:00
Oct 11 05:10:11 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:10:11 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:10:11.971Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:11 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159591993,"cmd_timestamp_ms":1760159411993,"source":"schedule"}
Oct 11 05:10:11 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159591993,"cmd_timestamp_ms":1760159411993,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:10:12.178+00:00
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:10:12.178Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159592195,"cmd_timestamp_ms":1760159412195,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159592195,"cmd_timestamp_ms":1760159412195,"source":"schedule"}
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m: Connected to MQTT server
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:10:12.320+00:00
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:10:12.320Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592339,"cmd_timestamp_ms":1760159412339,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592339,"cmd_timestamp_ms":1760159412339,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:10:12.461+00:00
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:10:12 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:10:12 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:10:12.461Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592484,"cmd_timestamp_ms":1760159412484,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592484,"cmd_timestamp_ms":1760159412484,"source":"schedule"}
Oct 11 05:10:12 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:10:12 IQ138000 knxd[5148]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:10:12 IQ138000 knxd[5148]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:10:12 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:10:12 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:10:12.568+00:00
Oct 11 05:10:12 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:10:12.568Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592598,"cmd_timestamp_ms":1760159412598,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592598,"cmd_timestamp_ms":1760159412598,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:12 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:10:12 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:10:12 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:10:12 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:10:12.775+00:00
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:10:12 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:10:12.775Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592801,"cmd_timestamp_ms":1760159412801,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592801,"cmd_timestamp_ms":1760159412801,"source":"schedule"}
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m: Started frontend on port 8282
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:10:12.857+00:00
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:10:12.857Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592871,"cmd_timestamp_ms":1760159412871,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159592871,"cmd_timestamp_ms":1760159412871,"source":"schedule"}
Oct 11 05:10:12 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:10:12 IQ138000 npm[3718]: [2025-10-11 05:10:12] info:         z2m: Zigbee2MQTT started!
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:10:13.155+00:00
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:10:13.155Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159593170,"cmd_timestamp_ms":1760159413170,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159593170,"cmd_timestamp_ms":1760159413170,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:10:13 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:13 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:13 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:10:13.519+00:00
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:10:13.519Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159593533,"cmd_timestamp_ms":1760159413533,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159593533,"cmd_timestamp_ms":1760159413533,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:10:13.692+00:00
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:10:13.692Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159593711,"cmd_timestamp_ms":1760159413711,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159593711,"cmd_timestamp_ms":1760159413711,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:10:13 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:10:13.874+00:00
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:10:13.874Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159593886,"cmd_timestamp_ms":1760159413886,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159593886,"cmd_timestamp_ms":1760159413886,"source":"schedule"}
Oct 11 05:10:13 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:10:13 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:10:14.019+00:00
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:10:14.019Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:10:14 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760159594030,"cmd_timestamp_ms":1760159414030,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760159594030,"cmd_timestamp_ms":1760159414030,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:10:14.182+00:00
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:10:14.182Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760159594194,"cmd_timestamp_ms":1760159414194,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760159594194,"cmd_timestamp_ms":1760159414194,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:10:14.381+00:00
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:10:14.381Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159594397,"cmd_timestamp_ms":1760159414397,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159594397,"cmd_timestamp_ms":1760159414397,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:10:14.529+00:00
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:10:14.529Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159594539,"cmd_timestamp_ms":1760159414539,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159594539,"cmd_timestamp_ms":1760159414539,"source":"schedule"}
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:10:14 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:10:14 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:10:14 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:14 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:10:15 IQ138000 wb-watchdog[5268]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:10:15 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:10:15 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:10:16 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:10:16 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:10:16 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:10:17 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:17 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:17 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:10:17 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:10:18 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:19 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:10:19 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:19 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:20 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:20 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:20 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:21 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:21 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:21 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:10:21 IQ138000 ModemManager[477]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:10:21 IQ138000 ModemManager[477]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:10:22 IQ138000 ModemManager[477]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:10:22 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:22 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:10:22 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:10:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:10:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:10:22 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:10:22 IQ138000 knxd[5378]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:10:22 IQ138000 knxd[5378]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:10:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:10:22 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:10:22 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:10:22 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:10:23 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:10:23 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:10:23 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:10:23 IQ138000 ModemManager[477]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:10:23 IQ138000 python3[1906]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:10:23 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:23 IQ138000 ModemManager[477]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7528] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7566] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7624] device (ttyUSB1): modem state 'enabling'
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7658] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7684] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7716] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7721] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:23 IQ138000 NetworkManager[403]: <info>  [1760159423.7741] manager: NetworkManager state is now CONNECTING
Oct 11 05:10:23 IQ138000 ModemManager[477]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:10:23 IQ138000 wb-mqtt-nm-helper[1992]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:10:23 IQ138000 ModemManager[477]: <info>  [modem0] power state updated: on
Oct 11 05:10:24 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:24 IQ138000 python3[1906]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:10:24 IQ138000 python3[1906]:    --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:10:24 IQ138000 python3[1906]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:10:24 IQ138000 python3[1906]:            |                model: A7602E-H
Oct 11 05:10:24 IQ138000 python3[1906]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:10:24 IQ138000 python3[1906]:            |            supported: gsm-umts
Oct 11 05:10:24 IQ138000 python3[1906]:            |              current: gsm-umts
Oct 11 05:10:24 IQ138000 python3[1906]:            |         equipment id: 860803062234204
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   System   |               device: wbc
Oct 11 05:10:24 IQ138000 python3[1906]:            |              drivers: option, rndis_host
Oct 11 05:10:24 IQ138000 python3[1906]:            |               plugin: simtech
Oct 11 05:10:24 IQ138000 python3[1906]:            |         primary port: ttyUSB1
Oct 11 05:10:24 IQ138000 python3[1906]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:10:24 IQ138000 python3[1906]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:10:24 IQ138000 python3[1906]:            |                state: enabling
Oct 11 05:10:24 IQ138000 python3[1906]:            |          power state: on
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:10:24 IQ138000 python3[1906]:            |              current: allowed: any; preferred: none
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   3GPP     |                 imei: 860803062234204
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:10:24 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:24 IQ138000 python3[1906]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:24 IQ138000 python3[1906]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:10:24 IQ138000 python3[1906]:            |                       slot 2: none
Oct 11 05:10:24 IQ138000 python3[1906]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:10:24 IQ138000 python3[1906]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:10:24 IQ138000 python3[1906]:  successfully requested primary SIM switch in modem
Oct 11 05:10:24 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:26 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:10:26 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:27 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:10:27 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:10:27 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:10:27 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:10:27 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:10:27 IQ138000 lsyncd[5432]: 05:10:27 Normal: --- Startup ---
Oct 11 05:10:27 IQ138000 lsyncd[5432]: 05:10:27 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:10:27 IQ138000 lsyncd[5432]: iq_network_manager/iq_network_manager.log
Oct 11 05:10:27 IQ138000 lsyncd[5432]: journal
Oct 11 05:10:27 IQ138000 lsyncd[5432]: messages
Oct 11 05:10:27 IQ138000 lsyncd[5434]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:10:27 IQ138000 lsyncd[5433]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:10:27 IQ138000 lsyncd[5433]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:10:27 IQ138000 lsyncd[5432]: 05:10:27 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:10:27 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:10:27 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:10:27 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:10:28 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] simple connect started...
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:10:28 IQ138000 NetworkManager[403]: <info>  [1760159428.4823] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:28 IQ138000 NetworkManager[403]: <info>  [1760159428.4845] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:10:28 IQ138000 NetworkManager[403]: <info>  [1760159428.4883] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:10:28 IQ138000 NetworkManager[403]: <info>  [1760159428.4924] ppp-manager: starting PPP connection
Oct 11 05:10:28 IQ138000 NetworkManager[403]: <info>  [1760159428.5056] ppp-manager: pppd started with pid 5444
Oct 11 05:10:28 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:10:28 IQ138000 pppd[5444]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:10:28 IQ138000 NetworkManager[5444]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: initializing
Oct 11 05:10:28 IQ138000 pppd[5444]: pppd 2.4.9 started by root, uid 0
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:10:28 IQ138000 pppd[5444]: Using interface ppp0
Oct 11 05:10:28 IQ138000 NetworkManager[5444]: Using interface ppp0
Oct 11 05:10:28 IQ138000 NetworkManager[5444]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:10:28 IQ138000 pppd[5444]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:10:28 IQ138000 NetworkManager[403]: <info>  [1760159428.5724] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:10:28 IQ138000 pppd[5444]: PAP authentication succeeded
Oct 11 05:10:28 IQ138000 NetworkManager[5444]: PAP authentication succeeded
Oct 11 05:10:28 IQ138000 pppd[5444]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:10:28 IQ138000 pppd[5444]: kernel does not support PPP filtering
Oct 11 05:10:28 IQ138000 NetworkManager[5444]: kernel does not support PPP filtering
Oct 11 05:10:28 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:10:28 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:10:28 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:10:28 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:28 IQ138000 ModemManager[477]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:10:28 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:10:29 IQ138000 pppd[5444]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:10:29 IQ138000 NetworkManager[5444]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:10:29 IQ138000 pppd[5444]: local  IP address 10.228.182.139
Oct 11 05:10:29 IQ138000 NetworkManager[5444]: local  IP address 10.228.182.139
Oct 11 05:10:29 IQ138000 NetworkManager[5444]: remote IP address 10.64.64.64
Oct 11 05:10:29 IQ138000 NetworkManager[5444]: primary   DNS address 172.23.10.131
Oct 11 05:10:29 IQ138000 NetworkManager[5444]: secondary DNS address 172.23.10.130
Oct 11 05:10:29 IQ138000 pppd[5444]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:10:29 IQ138000 pppd[5444]: remote IP address 10.64.64.64
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.1527] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:10:29 IQ138000 pppd[5444]: primary   DNS address 172.23.10.131
Oct 11 05:10:29 IQ138000 pppd[5444]: secondary DNS address 172.23.10.130
Oct 11 05:10:29 IQ138000 pppd[5444]: nm-ppp-plugin: ip-up event
Oct 11 05:10:29 IQ138000 pppd[5444]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.1679] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.1705] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.1778] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.1845] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:10:29 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:10:29 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.2293] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:29 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:10:29 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:10:29 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:10:29 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.3292] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.3304] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.3326] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.3347] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:10:29 IQ138000 NetworkManager[403]: <info>  [1760159429.3382] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:10:29 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:29 IQ138000 wb-mqtt-serial[1660]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:10:29 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:30 IQ138000 vnstatd[1649]: Info: Interface "ppp0" enabled.
Oct 11 05:10:30 IQ138000 ntpd[1643]: Listen normally on 4 ppp0 10.228.182.139:123
Oct 11 05:10:30 IQ138000 ntpd[1643]: new interface(s) found: waking up resolver
Oct 11 05:10:30 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:31 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:31 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:32 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:10:32 IQ138000 wb-mqtt-serial[1660]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:10:32 IQ138000 wb-mqtt-serial[1660]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:10:32 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:10:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:10:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:10:33 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:10:33 IQ138000 wb-mqtt-knx[2124]: INFO: knxd connected successfully
Oct 11 05:10:34 IQ138000 python3[1906]: Выполнение: mmcli -i any
Oct 11 05:10:34 IQ138000 python3[1906]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:10:34 IQ138000 python3[1906]:    -------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:34 IQ138000 python3[1906]:   -------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Properties |            active: yes
Oct 11 05:10:34 IQ138000 python3[1906]:              |              imsi: 250997340491874
Oct 11 05:10:34 IQ138000 python3[1906]:              |             iccid: 8970199210429593744
Oct 11 05:10:34 IQ138000 python3[1906]:              |       operator id: 25099
Oct 11 05:10:34 IQ138000 python3[1906]:              |     operator name: Beeline
Oct 11 05:10:34 IQ138000 python3[1906]: Выполнение: mmcli -m wbc
Oct 11 05:10:34 IQ138000 python3[1906]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:10:34 IQ138000 python3[1906]:    --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:10:34 IQ138000 python3[1906]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:10:34 IQ138000 python3[1906]:            |                model: A7602E-H
Oct 11 05:10:34 IQ138000 python3[1906]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:10:34 IQ138000 python3[1906]:            |            supported: gsm-umts
Oct 11 05:10:34 IQ138000 python3[1906]:            |              current: gsm-umts
Oct 11 05:10:34 IQ138000 python3[1906]:            |         equipment id: 860803062234204
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   System   |               device: wbc
Oct 11 05:10:34 IQ138000 python3[1906]:            |              drivers: option, rndis_host
Oct 11 05:10:34 IQ138000 python3[1906]:            |               plugin: simtech
Oct 11 05:10:34 IQ138000 python3[1906]:            |         primary port: ttyUSB1
Oct 11 05:10:34 IQ138000 python3[1906]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:10:34 IQ138000 python3[1906]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:10:34 IQ138000 python3[1906]:            |                state: connected
Oct 11 05:10:34 IQ138000 python3[1906]:            |          power state: on
Oct 11 05:10:34 IQ138000 python3[1906]:            |          access tech: lte
Oct 11 05:10:34 IQ138000 python3[1906]:            |       signal quality: 93% (recent)
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:10:34 IQ138000 python3[1906]:            |              current: allowed: any; preferred: none
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   3GPP     |                 imei: 860803062234204
Oct 11 05:10:34 IQ138000 python3[1906]:            |          operator id: 25099
Oct 11 05:10:34 IQ138000 python3[1906]:            |        operator name: beeline
Oct 11 05:10:34 IQ138000 python3[1906]:            |         registration: home
Oct 11 05:10:34 IQ138000 python3[1906]:            | packet service state: attached
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:34 IQ138000 python3[1906]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:10:34 IQ138000 python3[1906]:            |                       slot 2: none
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:10:34 IQ138000 python3[1906]: Current state: home
Oct 11 05:10:34 IQ138000 python3[1906]: SIM registered in the network.
Oct 11 05:10:34 IQ138000 python3[1906]: Выполнение: mmcli -m wbc
Oct 11 05:10:34 IQ138000 python3[1906]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:10:34 IQ138000 python3[1906]:    --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:10:34 IQ138000 python3[1906]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:10:34 IQ138000 python3[1906]:            |                model: A7602E-H
Oct 11 05:10:34 IQ138000 python3[1906]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:10:34 IQ138000 python3[1906]:            |            supported: gsm-umts
Oct 11 05:10:34 IQ138000 python3[1906]:            |              current: gsm-umts
Oct 11 05:10:34 IQ138000 python3[1906]:            |         equipment id: 860803062234204
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   System   |               device: wbc
Oct 11 05:10:34 IQ138000 python3[1906]:            |              drivers: option, rndis_host
Oct 11 05:10:34 IQ138000 python3[1906]:            |               plugin: simtech
Oct 11 05:10:34 IQ138000 python3[1906]:            |         primary port: ttyUSB1
Oct 11 05:10:34 IQ138000 python3[1906]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:10:34 IQ138000 python3[1906]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:10:34 IQ138000 python3[1906]:            |                state: connected
Oct 11 05:10:34 IQ138000 python3[1906]:            |          power state: on
Oct 11 05:10:34 IQ138000 python3[1906]:            |          access tech: lte
Oct 11 05:10:34 IQ138000 python3[1906]:            |       signal quality: 93% (recent)
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:10:34 IQ138000 python3[1906]:            |              current: allowed: any; preferred: none
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   3GPP     |                 imei: 860803062234204
Oct 11 05:10:34 IQ138000 python3[1906]:            |          operator id: 25099
Oct 11 05:10:34 IQ138000 python3[1906]:            |        operator name: beeline
Oct 11 05:10:34 IQ138000 python3[1906]:            |         registration: home
Oct 11 05:10:34 IQ138000 python3[1906]:            | packet service state: attached
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:34 IQ138000 python3[1906]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:10:34 IQ138000 python3[1906]:            |                       slot 2: none
Oct 11 05:10:34 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:10:34 IQ138000 python3[1906]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:34 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:10:34 IQ138000 python3[1906]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:10:34 IQ138000 python3[1906]:    -------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:34 IQ138000 python3[1906]:   -------------------------------
Oct 11 05:10:34 IQ138000 python3[1906]:   Properties |            active: yes
Oct 11 05:10:34 IQ138000 python3[1906]:              |              imsi: 250997340491874
Oct 11 05:10:34 IQ138000 python3[1906]:              |             iccid: 8970199210429593744
Oct 11 05:10:34 IQ138000 python3[1906]:              |       operator id: 25099
Oct 11 05:10:34 IQ138000 python3[1906]:              |     operator name: Beeline
Oct 11 05:10:35 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:36 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:36 IQ138000 ntpd[1643]: Soliciting pool server 92.255.126.3
Oct 11 05:10:37 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:37 IQ138000 ntpd[1643]: Soliciting pool server 91.207.136.55
Oct 11 05:10:38 IQ138000 ntpd[1643]: Soliciting pool server 188.225.9.167
Oct 11 05:10:39 IQ138000 ntpd[1643]: Soliciting pool server 193.106.93.116
Oct 11 05:10:39 IQ138000 python3[1906]: Выполнение: mmcli -m wbc
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:40 IQ138000 python3[1906]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:10:40 IQ138000 python3[1906]:    --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:10:40 IQ138000 python3[1906]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:10:40 IQ138000 python3[1906]:            |                model: A7602E-H
Oct 11 05:10:40 IQ138000 python3[1906]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:10:40 IQ138000 python3[1906]:            |            supported: gsm-umts
Oct 11 05:10:40 IQ138000 python3[1906]:            |              current: gsm-umts
Oct 11 05:10:40 IQ138000 python3[1906]:            |         equipment id: 860803062234204
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   System   |               device: wbc
Oct 11 05:10:40 IQ138000 python3[1906]:            |              drivers: option, rndis_host
Oct 11 05:10:40 IQ138000 python3[1906]:            |               plugin: simtech
Oct 11 05:10:40 IQ138000 python3[1906]:            |         primary port: ttyUSB1
Oct 11 05:10:40 IQ138000 python3[1906]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:10:40 IQ138000 python3[1906]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:10:40 IQ138000 python3[1906]:            |                state: connected
Oct 11 05:10:40 IQ138000 python3[1906]:            |          power state: on
Oct 11 05:10:40 IQ138000 python3[1906]:            |          access tech: lte
Oct 11 05:10:40 IQ138000 python3[1906]:            |       signal quality: 93% (recent)
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:10:40 IQ138000 python3[1906]:            |              current: allowed: any; preferred: none
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   3GPP     |                 imei: 860803062234204
Oct 11 05:10:40 IQ138000 python3[1906]:            |          operator id: 25099
Oct 11 05:10:40 IQ138000 python3[1906]:            |        operator name: beeline
Oct 11 05:10:40 IQ138000 python3[1906]:            |         registration: home
Oct 11 05:10:40 IQ138000 python3[1906]:            | packet service state: attached
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:40 IQ138000 python3[1906]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:10:40 IQ138000 python3[1906]:            |                       slot 2: none
Oct 11 05:10:40 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:10:40 IQ138000 python3[1906]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:40 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:10:40 IQ138000 python3[1906]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:10:40 IQ138000 python3[1906]:    -------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:40 IQ138000 python3[1906]:   -------------------------------
Oct 11 05:10:40 IQ138000 python3[1906]:   Properties |            active: yes
Oct 11 05:10:40 IQ138000 python3[1906]:              |              imsi: 250997340491874
Oct 11 05:10:40 IQ138000 python3[1906]:              |             iccid: 8970199210429593744
Oct 11 05:10:40 IQ138000 python3[1906]:              |       operator id: 25099
Oct 11 05:10:40 IQ138000 python3[1906]:              |     operator name: Beeline
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:40 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 ntpd[1643]: Soliciting pool server 45.141.102.99
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 05:10:41 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:10:42 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:10:42 IQ138000 ntpd[1643]: Soliciting pool server 85.21.78.91
Oct 11 05:10:43 IQ138000 ntpd[1643]: Soliciting pool server 212.113.99.6
Oct 11 05:10:43 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:10:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:10:44 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:44 IQ138000 ntpd[1643]: Soliciting pool server 178.186.166.30
Oct 11 05:10:45 IQ138000 wb-mqtt-serial[1660]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:10:45 IQ138000 python3[1906]: Выполнение: mmcli -m wbc
Oct 11 05:10:45 IQ138000 python3[1906]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:10:45 IQ138000 python3[1906]:    --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:10:45 IQ138000 python3[1906]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:10:45 IQ138000 python3[1906]:            |                model: A7602E-H
Oct 11 05:10:45 IQ138000 python3[1906]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:10:45 IQ138000 python3[1906]:            |            supported: gsm-umts
Oct 11 05:10:45 IQ138000 python3[1906]:            |              current: gsm-umts
Oct 11 05:10:45 IQ138000 python3[1906]:            |         equipment id: 860803062234204
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   System   |               device: wbc
Oct 11 05:10:45 IQ138000 python3[1906]:            |              drivers: option, rndis_host
Oct 11 05:10:45 IQ138000 python3[1906]:            |               plugin: simtech
Oct 11 05:10:45 IQ138000 python3[1906]:            |         primary port: ttyUSB1
Oct 11 05:10:45 IQ138000 python3[1906]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:10:45 IQ138000 python3[1906]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:10:45 IQ138000 python3[1906]:            |                state: connected
Oct 11 05:10:45 IQ138000 python3[1906]:            |          power state: on
Oct 11 05:10:45 IQ138000 python3[1906]:            |          access tech: lte
Oct 11 05:10:45 IQ138000 python3[1906]:            |       signal quality: 93% (recent)
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:10:45 IQ138000 python3[1906]:            |              current: allowed: any; preferred: none
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   3GPP     |                 imei: 860803062234204
Oct 11 05:10:45 IQ138000 python3[1906]:            |          operator id: 25099
Oct 11 05:10:45 IQ138000 python3[1906]:            |        operator name: beeline
Oct 11 05:10:45 IQ138000 python3[1906]:            |         registration: home
Oct 11 05:10:45 IQ138000 python3[1906]:            | packet service state: attached
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:45 IQ138000 python3[1906]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:10:45 IQ138000 python3[1906]:            |                       slot 2: none
Oct 11 05:10:45 IQ138000 python3[1906]:   --------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:10:45 IQ138000 python3[1906]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:45 IQ138000 python3[1906]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:10:45 IQ138000 python3[1906]:    -------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:10:45 IQ138000 python3[1906]:   -------------------------------
Oct 11 05:10:45 IQ138000 python3[1906]:   Properties |            active: yes
Oct 11 05:10:45 IQ138000 python3[1906]:              |              imsi: 250997340491874
Oct 11 05:10:45 IQ138000 python3[1906]:              |             iccid: 8970199210429593744
Oct 11 05:10:45 IQ138000 python3[1906]:              |       operator id: 25099
Oct 11 05:10:45 IQ138000 python3[1906]:              |     operator name: Beeline
Oct 11 05:10:45 IQ138000 ntpd[1643]: Soliciting pool server 2a12:4141:face:6::a
-- Boot 984f393311d24d98a51da496b93af0b5 --
Oct 11 05:12:35 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:12:35 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:12:35 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:12:35 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:12:35 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:12:35 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:12:35 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:12:35 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:12:35 IQ138000 kernel: Zone ranges:
Oct 11 05:12:35 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:12:35 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:12:35 IQ138000 kernel: Movable zone start for each node
Oct 11 05:12:35 IQ138000 kernel: Early memory node ranges
Oct 11 05:12:35 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:12:35 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:12:35 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:12:35 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:12:35 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:12:35 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:12:35 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:12:35 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:12:35 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:12:35 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:12:35 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:12:35 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:12:35 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:12:35 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:12:35 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:12:35 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:12:35 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:12:35 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:12:35 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:12:35 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:12:35 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:12:35 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:12:35 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:12:35 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:12:35 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:12:35 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:12:35 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:12:35 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:12:35 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:12:35 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:12:35 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:12:35 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:12:35 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:12:35 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:12:35 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:12:35 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:12:35 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:12:35 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:12:35 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:12:35 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:12:35 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:12:35 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:12:35 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:12:35 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:12:35 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:12:35 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:12:35 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:12:35 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:12:35 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:12:35 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:12:35 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:12:35 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:12:35 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:12:35 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:12:35 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:12:35 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:12:35 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:12:35 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:12:35 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:12:35 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:12:35 IQ138000 kernel: No ATAGs?
Oct 11 05:12:35 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:12:35 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:12:35 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:12:35 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:12:35 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:12:35 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:12:35 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:12:35 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:12:35 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:12:35 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:12:35 IQ138000 kernel: PTP clock support registered
Oct 11 05:12:35 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:12:35 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:12:35 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:12:35 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:12:35 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:12:35 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:12:35 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:12:35 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:12:35 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:12:35 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:12:35 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:12:35 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:12:35 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:12:35 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:12:35 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:12:35 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:12:35 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:12:35 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:12:35 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:12:35 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:12:35 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:12:35 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:12:35 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:12:35 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:12:35 IQ138000 kernel: brd: module loaded
Oct 11 05:12:35 IQ138000 kernel: loop: module loaded
Oct 11 05:12:35 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:12:35 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:12:35 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:12:35 IQ138000 kernel: CAN device driver interface
Oct 11 05:12:35 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:12:35 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:12:35 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:12:35 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:12:35 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:12:35 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:12:35 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:12:35 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:12:35 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:12:35 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:12:35 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:12:35 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:12:35 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:12:35 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:12:35 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:12:35 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:12:35 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:12:35 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:12:35 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:12:35 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:12:35 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:12:35 IQ138000 kernel: can: controller area network core
Oct 11 05:12:35 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:12:35 IQ138000 kernel: can: raw protocol
Oct 11 05:12:35 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:12:35 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:12:35 IQ138000 kernel: can: SAE J1939
Oct 11 05:12:35 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:12:35 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:12:35 IQ138000 kernel: registered taskstats version 1
Oct 11 05:12:35 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:12:35 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:12:35 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:12:35 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:12:35 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:12:35 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:12:35 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:12:35 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:12:35 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:12:31 UTC (1760159551)
Oct 11 05:12:35 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:12:35 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:12:35 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:12:35 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:12:35 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:12:35 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:12:35 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:12:35 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:12:35 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:12:35 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:12:35 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:12:35 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:12:35 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:12:35 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:12:35 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: random: fast init done
Oct 11 05:12:35 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:12:35 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:12:35 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:12:35 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:12:35 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:12:35 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:12:35 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:12:35 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:12:35 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:12:35 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:12:35 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:12:35 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:12:35 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:12:35 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:12:35 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:12:35 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:12:35 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:12:35 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:12:35 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:12:35 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:12:35 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:12:35 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:12:35 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:12:35 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:12:35 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:12:35 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:12:35 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:12:35 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:12:35 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:12:35 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:12:35 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:12:35 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:12:35 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:12:35 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:12:35 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:12:35 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:12:35 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:12:35 IQ138000 kernel: of_cfs_init
Oct 11 05:12:35 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:12:35 IQ138000 kernel: ALSA device list:
Oct 11 05:12:35 IQ138000 kernel:   No soundcards found.
Oct 11 05:12:35 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:12:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:12:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:12:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:12:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:12:35 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:12:35 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:12:35 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:12:35 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:12:35 IQ138000 kernel:   with arguments:
Oct 11 05:12:35 IQ138000 kernel:     /sbin/init
Oct 11 05:12:35 IQ138000 kernel:   with environment:
Oct 11 05:12:35 IQ138000 kernel:     HOME=/
Oct 11 05:12:35 IQ138000 kernel:     TERM=linux
Oct 11 05:12:35 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:12:35 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:12:35 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:12:35 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:12:35 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:12:35 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:12:35 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:12:35 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:12:35 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:12:35 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:12:35 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:12:35 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:12:35 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:12:35 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:12:35 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:12:35 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:12:35 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:12:35 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:12:35 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:12:35 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:12:35 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:12:35 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:12:35 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:12:35 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:12:35 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:12:35 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:12:35 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:12:35 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:12:35 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:12:35 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:12:35 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:12:35 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:12:35 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:12:35 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:12:35 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:12:35 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:12:35 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:12:35 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:12:35 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:12:35 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:12:35 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:12:35 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:12:35 IQ138000 systemd-journald[140]: Journal started
Oct 11 05:12:35 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:12:35 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:12:35 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:12:35 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:12:35 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:12:35 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:12:35 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:12:35 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:12:35 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:12:35 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:12:35 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:12:35 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:12:35 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:12:36 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:12:36 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:12:36 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:12:36 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:12:36 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:12:36 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:12:36 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:12:36 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:12:36 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:12:36 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:12:36 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:12:36 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:12:36 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:12:36 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:12:36 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:12:36 IQ138000 systemd-udevd[158]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:12:36 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:12:36 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:12:36 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 05:12:37 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:12:37 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:12:37 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:12:37 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:12:37 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:12:37 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:12:37 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:12:37 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:12:37 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:12:37 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:12:37 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:12:37 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:12:37 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 05:12:37 IQ138000 systemd-udevd[167]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:12:37 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:12:37 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:12:37 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:12:37 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:12:37 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:12:37 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:12:37 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:12:37 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:12:37 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:12:38 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:12:38 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:12:38 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:12:38 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:12:38 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:12:38 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:12:38 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:12:38 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 05:12:38 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 05:12:38 IQ138000 systemd-udevd[162]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:12:38 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:12:38 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:12:38 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:12:38 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:12:38 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:12:38 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:12:38 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:12:38 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:12:38 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:12:38 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:12:38 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:12:38 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:12:38 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:12:38 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:12:38 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:12:38 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:12:38 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:12:38 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:12:38 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 05:12:38 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:12:38 IQ138000 systemd-fsck[216]: data: clean, 16450/328656 files, 373376/1313536 blocks
Oct 11 05:12:38 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:12:38 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:12:38 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:12:38 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:12:39 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:12:39 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:12:39 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:12:39 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:12:39 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:12:39 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.381ms for 462 entries.
Oct 11 05:12:39 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 504.4M, max 496.6M, 0B free.
Oct 11 05:12:39 IQ138000 kernel: random: crng init done
Oct 11 05:12:39 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:12:39 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:12:39 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 05:12:39 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:12:39 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:12:39 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:12:39 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:12:39 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:12:40 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:12:40 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:12:40 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:12:40 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:12:40 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:12:40 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:12:40 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:12:40 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:12:40 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:12:40 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:12:40 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:12:40 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:12:40 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:12:40 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:12:40 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:12:40 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:12:40 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:12:40 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:12:40 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:12:40 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:12:40 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:12:40 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:12:40 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:12:40 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:12:40 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:12:40 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:12:40 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 05:12:40 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:12:40 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:12:40 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 05:12:40 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:12:40 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:12:40 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:12:40 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:12:40 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:12:40 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:12:40 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:12:40 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:12:40 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 05:12:41 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:12:41 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 05:12:41 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:12:41 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:12:41 IQ138000 migrate.sh[321]: Error: No such file or directory
Oct 11 05:12:41 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:12:41 IQ138000 wb-watchdog[326]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:12:41 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:12:41 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:12:41 IQ138000 migrate.sh[330]: Error: No such file or directory
Oct 11 05:12:41 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:12:41 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:12:41 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:12:41 IQ138000 migrate.sh[347]: Error: No such file or directory
Oct 11 05:12:41 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:12:41 IQ138000 reverse-ssh.sh[350]: Error: No such file or directory
Oct 11 05:12:41 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:12:41 IQ138000 rules-preprocessor[340]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:12:41 IQ138000 rules-preprocessor[340]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:12:41 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:12:41 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:12:41 IQ138000 migrate.sh[359]: Error: No such file or directory
Oct 11 05:12:41 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:12:41 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:12:41 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:12:41 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:12:41 IQ138000 migrate.sh[371]: Error: No such file or directory
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Successfully dropped root privileges.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: avahi-daemon 0.8 starting up.
Oct 11 05:12:41 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Successfully called chroot().
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Successfully dropped remaining capabilities.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: No service file found in /etc/avahi/services.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Network interface enumeration completed.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Registering new address record for ::1 on lo.*.
Oct 11 05:12:41 IQ138000 avahi-daemon[368]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:12:41 IQ138000 wb-watch-configs[388]: Watched dirs: /etc /etc/network
Oct 11 05:12:41 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:12:41 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:12:41 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:12:41 IQ138000 wpa_supplicant[381]: Successfully initialized wpa_supplicant
Oct 11 05:12:41 IQ138000 systemd-logind[348]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:12:41 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:12:41 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:12:41 IQ138000 systemd-logind[348]: New seat seat0.
Oct 11 05:12:41 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:41 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:12:41 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:12:41 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:12:41 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:41 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:12:41 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:12:41 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:12:41 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:12:41 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:12:41 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:41 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:12:41 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:12:42 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:12:42 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:12:42 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:12:42 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:12:42 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:12:42 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:12:42 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.2420] NetworkManager (version 1.42.4) is starting... (boot:984f3933-11d2-4d98-a51d-a496b93af0b5)
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.2424] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:12:42 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:12:42 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.2739] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:12:42 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:12:42 IQ138000 monit[324]: Starting daemon monitor: monit.
Oct 11 05:12:42 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.3322] manager[0x717128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:12:42 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:12:42 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:12:42 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:12:42 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:12:42 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:12:42 IQ138000 avahi-daemon[368]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3348623112.
Oct 11 05:12:42 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:12:42 IQ138000 ModemManager[469]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:12:42 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:12:42 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9365] hostname: hostname: using hostnamed
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9368] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9403] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9487] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9502] manager[0x717128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9504] manager[0x717128]: rfkill: WWAN hardware radio set enabled
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9822] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9927] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:12:42 IQ138000 NetworkManager[406]: <info>  [1760159562.9984] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:12:43 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0257] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0315] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0343] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0358] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0370] manager: Networking is enabled by state file
Oct 11 05:12:43 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0481] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0484] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0486] ifupdown: management mode: unmanaged
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0487] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.0489] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:12:43 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1204] dhcp: init: Using DHCP client 'internal'
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1227] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1382] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1495] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1623] device (lo): Activation: starting connection 'lo' (cfaf9672-8b4f-4ed4-8f85-d89d1e421413)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1760] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.1825] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:12:43 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:12:43 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.5410] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.5543] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.5590] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.5669] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:12:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:12:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:12:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:12:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:12:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:12:43 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.7840] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.7908] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.7968] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:12:43 IQ138000 NetworkManager[406]: <info>  [1760159563.8005] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.6355] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.6407] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.6469] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.7141] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.7166] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.7317] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.7859] modem-manager: ModemManager available
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.7879] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.7993] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.8039] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:12:44 IQ138000 NetworkManager[406]: <info>  [1760159564.8087] device (lo): Activation: successful, device activated.
Oct 11 05:12:44 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1045] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1052] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1073] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1112] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1292] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1298] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1324] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1344] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1539] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1634] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1784] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:12:45 IQ138000 NetworkManager[406]: <info>  [1760159565.1864] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:45 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:12:45 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:12:45 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:12:48 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:12:48 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 05:12:48 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:48 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:12:48 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:12:49 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:12:49 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 05:12:49 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:49 IQ138000 init.sh[1320]: ...
Oct 11 05:12:49 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 05:12:49 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:49 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:12:49 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:12:49 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:12:49 IQ138000 init.sh[1430]: In file included from -:24:
Oct 11 05:12:49 IQ138000 init.sh[1430]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:50 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:12:50 IQ138000 init.sh[1320]: ...
Oct 11 05:12:50 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 05:12:50 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:50 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:12:50 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:12:50 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:12:50 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 05:12:50 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:50 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:12:50 IQ138000 init.sh[1491]: In file included from -:11:
Oct 11 05:12:50 IQ138000 init.sh[1491]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:12:51 IQ138000 init.sh[1320]: ...
Oct 11 05:12:51 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:12:51 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:12:51 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:12:51 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:12:51 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:12:51 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:12:51 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:12:51 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:12:51 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:12:51 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:12:51 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:12:51 IQ138000 knxd[1612]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:12:51 IQ138000 knxd[1612]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:12:51 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:12:51 IQ138000 lsyncd[1619]: 05:12:51 Normal: --- Startup ---
Oct 11 05:12:51 IQ138000 lsyncd[1619]: 05:12:51 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:12:51 IQ138000 lsyncd[1619]: iq_network_manager/iq_network_manager.log
Oct 11 05:12:51 IQ138000 lsyncd[1619]: messages
Oct 11 05:12:51 IQ138000 lsyncd[1619]: journal
Oct 11 05:12:51 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:12:51 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:12:51 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:12:51 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:12:51 IQ138000 lsyncd[1632]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:12:51 IQ138000 lsyncd[1628]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:12:51 IQ138000 lsyncd[1628]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 05:12:51 IQ138000 lsyncd[1619]: 05:12:51 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:12:52 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:12:52 IQ138000 ntpd[1629]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:12:52 IQ138000 ntpd[1629]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:12:52 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 05:12:52 IQ138000 ntpd[1629]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:12:52 IQ138000 ntpd[1629]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:12:52 IQ138000 ntpd[1629]: corporation.  Support and training for ntp-4 are
Oct 11 05:12:52 IQ138000 ntpd[1629]: available at https://www.nwtime.org/support
Oct 11 05:12:52 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 05:12:52 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:12:52 IQ138000 ntpd[1655]: proto: precision = 1.000 usec (-20)
Oct 11 05:12:52 IQ138000 ntpd[1655]: basedate set to 2020-09-11
Oct 11 05:12:52 IQ138000 ntpd[1655]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:12:52 IQ138000 ntpd[1655]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:12:52 IQ138000 ntpd[1655]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:12:52 IQ138000 ntpd[1655]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:12:52 IQ138000 ntpd[1655]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:12:52 IQ138000 ntpd[1655]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:12:52 IQ138000 ntpd[1655]: Listen normally on 3 lo [::1]:123
Oct 11 05:12:52 IQ138000 ntpd[1655]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:12:52 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:12:52 IQ138000 persist_meter_data.sh[1657]: Error: No such file or directory
Oct 11 05:12:52 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:12:52 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:12:52 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:12:52 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 05:12:52 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 05:12:52 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:12:52 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:12:52 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:12:52 IQ138000 wb-mqtt-w1[1695]: MQTT broker localhost:1883
Oct 11 05:12:52 IQ138000 wb-mqtt-w1[1695]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:52 IQ138000 wb-mqtt-w1[1695]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:12:52 IQ138000 wb-mqtt-w1[1695]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:12:52 IQ138000 wb-mqtt-w1[1695]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:12:52 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:12:52 IQ138000 wb-connection-manager[1508]: Connection LegacyWiFi not found, skipping
Oct 11 05:12:52 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:12:52 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:12:52 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:12:52 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:12:52 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:12:52 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:12:52 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:52 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:12:52 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:12:52 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:12:52 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:12:52 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:12:52 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:52 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:12:53 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:12:53 IQ138000 ntpd[1655]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:12:53 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:12:53 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:12:53 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:12:53 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:12:53 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:12:53 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:12:53 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:12:53 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:12:53 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:12:53 IQ138000 sshd[1755]: Server listening on 0.0.0.0 port 22.
Oct 11 05:12:53 IQ138000 sshd[1755]: Server listening on :: port 22.
Oct 11 05:12:53 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:12:53 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:12:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:12:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:12:53 IQ138000 vnstatd[1664]: Info: vnStat daemon 2.6 started. (pid:1664 uid:110 gid:117 64-bit)
Oct 11 05:12:53 IQ138000 vnstatd[1664]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:12:53 IQ138000 vnstatd[1664]: Info: Interface "ppp0" disabled.
Oct 11 05:12:53 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:12:53 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:12:53 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:12:53 IQ138000 NetworkManager[406]: <error> [1760159573.6337] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:12:53 IQ138000 NetworkManager[406]: <info>  [1760159573.6340] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1508 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:12:53 IQ138000 wb-connection-manager[1508]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:12:53 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:53 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:12:53 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:12:53 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:12:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:12:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:12:53 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:12:53 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:12:54 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:12:54 IQ138000 ntpd[1655]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:12:54 IQ138000 knxd[1868]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:12:54 IQ138000 knxd[1868]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:12:54 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:12:54 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:12:54 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:12:54 IQ138000 reverse-ssh.sh[1902]: Error: No such file or directory
Oct 11 05:12:54 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3161] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3167] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1508 uid=0 result="success"
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3178] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3200] manager: NetworkManager state is now CONNECTING
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3258] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3285] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3288] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3385] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3481] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3553] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3583] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3585] Config: added 'scan_ssid' value '1'
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3586] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3588] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:12:54 IQ138000 NetworkManager[406]: <info>  [1760159574.3589] Config: added 'psk' value '<hidden>'
Oct 11 05:12:54 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:54 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:12:54 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:12:54 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:12:54 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:12:54 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:12:54 IQ138000 mosquitto[1927]: 1760159574: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:12:54 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:12:54 IQ138000 wb-adjust-systime[1905]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:12:54 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:12:54 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:12:54 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:12:54 IQ138000 wb-adjust-systime[1905]: Drift file is valid (was recently edited)
Oct 11 05:12:54 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:12:54 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:12:55 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:12:55 IQ138000 ntpd[1655]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:12:55 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:12:55 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:12:55 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: MQTT broker localhost:1883
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:12:55 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:12:55 IQ138000 wb-mqtt-knx[2029]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:55 IQ138000 wb-mqtt-knx[2029]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: INFO: [sqlite] Create indices if necessary
Oct 11 05:12:55 IQ138000 wb-mqtt-db[2007]: INFO: [sqlite] Analyzing data table
Oct 11 05:12:55 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:12:55 IQ138000 wb-mqtt-logs[2037]: MQTT broker localhost:1883
Oct 11 05:12:55 IQ138000 wb-mqtt-logs[2037]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:55 IQ138000 wb-mqtt-logs[2037]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:12:55 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:12:55 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:12:55 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [gpio driver] Started
Oct 11 05:12:55 IQ138000 wb-mqtt-gpio[1833]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:12:56 IQ138000 ntpd[1655]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:12:56 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:12:56 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.548s CPU time.
Oct 11 05:12:56 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:12:56 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:12:56 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:12:56 IQ138000 NetworkManager[406]: <info>  [1760159576.8837] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:12:56 IQ138000 NetworkManager[406]: <info>  [1760159576.8839] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:12:56 IQ138000 wb-mqtt-confed[1997]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:12:56 IQ138000 wb-mqtt-confed[1997]: INFO: [wbgo_mqtt] confed-IQ138000-1997: MQTT connection established
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:12:56 IQ138000 wb-mqtt-iec104[2017]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:12:56 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:12:57 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:12:57 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:12:57 IQ138000 wb-mqtt-opcua[2074]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:12:57 IQ138000 wb-mqtt-iec104[2017]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:12:57 IQ138000 wb-mqtt-iec104[2017]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:12:57 IQ138000 wb-mqtt-opcua[2074]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:12:57 IQ138000 wb-mqtt-opcua[2074]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:12:57 IQ138000 wb-mqtt-logs[2037]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:12:57 IQ138000 wb-mqtt-logs[2037]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:12:57 IQ138000 wb-mqtt-logs[2037]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:12:57 IQ138000 wb-mqtt-logs[2037]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:12:57 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:12:57 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:12:57 IQ138000 wb-mqtt-iec104[2262]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:12:57 IQ138000 wb-mqtt-mbgate[2048]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:12:57 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:12:57 IQ138000 wb-mqtt-opcua[2276]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:12:58 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:12:58 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:12:58 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:12:58 IQ138000 wb-mqtt-iec104[2262]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:12:58 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:12:58 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:12:58 IQ138000 wb-mqtt-opcua[2276]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:12:58 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:12:58 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:12:58 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:12:58 IQ138000 wb-mqtt-knx[2029]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:12:58 IQ138000 wb-mqtt-knx[2029]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:12:58 IQ138000 wb-mqtt-knx[2029]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:12:58 IQ138000 wb-mqtt-knx[2029]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:12:58 IQ138000 wb-mqtt-knx[2029]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:12:59 IQ138000 python3[1972]: No data file found at /tmp/network_status_cache.json
Oct 11 05:12:59 IQ138000 python3[1972]: Connecting to MQTT
Oct 11 05:12:59 IQ138000 python3[1972]: Connected to MQTT
Oct 11 05:12:59 IQ138000 python3[1972]: Connection returned result: Connection Accepted.
Oct 11 05:13:00 IQ138000 wpa_supplicant[381]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:13:01 IQ138000 wb-device-manager[1986]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:13:01 IQ138000 wb-device-manager[1986]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:13:02 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2066 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:13:02 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:13:02 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New virtual device lo cfaf9672-8b4f-4ed4-8f85-d89d1e421413 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:13:02 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:13:03 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New active connection lo cfaf9672-8b4f-4ed4-8f85-d89d1e421413 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:13:03 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:13:03 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:13:03 IQ138000 kernel: dldo4: disabling
Oct 11 05:13:04 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: MQTT broker localhost:1883
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:13:04 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:04 IQ138000 wb-mqtt-adc[3113]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:13:04 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:13:04 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:13:04 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:13:04 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:13:04 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:13:04 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:13:04 IQ138000 knxd[3147]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:13:04 IQ138000 knxd[3147]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:13:04 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:13:04 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:13:04 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:13:05 IQ138000 wb-mqtt-confed[1997]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:13:05 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:13:06 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:13:06 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:13:06 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:13:06 IQ138000 wb-mqtt-serial[1681]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:13:06 IQ138000 wb-gsm[3318]: main: Called from pid 1 (systemd)
Oct 11 05:13:06 IQ138000 wb-gsm[3369]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:13:06 IQ138000 wb-usb-otg-start.sh[3377]: : wb-usb-otg-start
Oct 11 05:13:06 IQ138000 wb-usb-otg-start.sh[3377]: main: setup_device()
Oct 11 05:13:06 IQ138000 wb-mqtt-db[2007]: INFO: [sqlite] DB initialization is done
Oct 11 05:13:07 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:13:07 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:13:07 IQ138000 kernel: using random self ethernet address
Oct 11 05:13:07 IQ138000 kernel: using random host ethernet address
Oct 11 05:13:07 IQ138000 wb-usb-otg-start.sh[3377]: main: enabling profile rndis
Oct 11 05:13:07 IQ138000 wb-gsm[3424]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:13:07 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:13:07 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:13:07 IQ138000 NetworkManager[406]: <info>  [1760159587.2524] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:13:07 IQ138000 systemd-udevd[3396]: Using default interface naming scheme 'v247'.
Oct 11 05:13:07 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:13:07 IQ138000 NetworkManager[406]: <info>  [1760159587.4760] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:13:07 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:13:07 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 05:13:07 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:13:07 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:13:08 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:13:08 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:13:09 IQ138000 wb-gsm[3577]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:13:09 IQ138000 wb-gsm[3588]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:13:09 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:13:09 IQ138000 wb-gsm[3611]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:13:09 IQ138000 python3[1972]: Выполнение: service wb-connection-manager stop
Oct 11 05:13:09 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:13:10 IQ138000 npm[1707]: > zigbee2mqtt@2.1.1 start
Oct 11 05:13:10 IQ138000 npm[1707]: > node index.js
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:13:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:13:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: DB logger started, go to main loop
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:13:12 IQ138000 wb-mqtt-db[2007]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:12 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is disconnected
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:13:13 IQ138000 npm[3649]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:13:13 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:13:14 IQ138000 wb-gsm[3999]: mm_off: Modem is already OFF
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:14 IQ138000 wb-gsm[4068]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:14 IQ138000 wb-gsm[4079]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:13:14 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:15 IQ138000 wb-gsm[4103]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:15 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:16 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:17 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:18 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:13:18 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:13:18 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:18 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:18 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:18 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:18 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:18 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:13:18 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:13:18 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:13:18 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:13:18 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:13:18 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:13:18 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:13:18 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:13:18 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:13:18 IQ138000 knxd[4444]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:13:18 IQ138000 knxd[4444]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:13:18 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:13:18 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:13:18 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:13:18 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:13:18 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.134s CPU time.
Oct 11 05:13:18 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:13:18 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:13:18 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:18 IQ138000 python3[1972]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:13:18 IQ138000 python3[1972]:  
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: MQTT broker localhost:1883
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: w1 thread Started
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:13:18 IQ138000 wb-mqtt-w1[4450]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:13:18 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <warn>  [1760159599.5302] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <info>  [1760159599.5305] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <info>  [1760159599.5329] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <warn>  [1760159599.5362] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <info>  [1760159599.5383] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <info>  [1760159599.5708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:13:19 IQ138000 NetworkManager[406]: <info>  [1760159599.5710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:13:19 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:19 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:20 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:13:20 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:13:20 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:20 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:13:20 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:13:20 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:13:21 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:21 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:13:22 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:13:22 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:13:22 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:13:22 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:13:23 IQ138000 NetworkManager[406]: <info>  [1760159603.0913] manager: startup complete
Oct 11 05:13:23 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:13:23 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:13:23 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:23 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:23 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:13:23 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:13:23 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:13:23 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:13:23 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:13:23 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:13:23 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:13:23 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:13:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:13:23 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:13:23 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:23 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:13:23 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:13:23 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:13:23 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:13:23 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:13:23 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:23 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:13:23 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:23 IQ138000 wb-rules[4568]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:13:23 IQ138000 wb-rules[4568]: INFO: driver is created
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:23 IQ138000 python3[1972]: Выполнение: mmcli -m wbc
Oct 11 05:13:23 IQ138000 wb-rules[4568]: INFO: [wbgo_mqtt] rules-IQ138000-4568: MQTT connection established
Oct 11 05:13:23 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:23 IQ138000 wb-rules[4568]: INFO: driver loop is started
Oct 11 05:13:23 IQ138000 wb-rules[4568]: INFO: wait for driver to become ready
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:13:24 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:13:24 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:13:24 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 watchdog[4640]: starting daemon (5.16):
Oct 11 05:13:24 IQ138000 watchdog[4640]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:13:24 IQ138000 watchdog[4640]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:13:24 IQ138000 watchdog[4640]:  ping: no machine to check
Oct 11 05:13:24 IQ138000 watchdog[4640]:  file: no file to check
Oct 11 05:13:24 IQ138000 watchdog[4640]:  pidfile: /var/run/sshd.pid
Oct 11 05:13:24 IQ138000 watchdog[4640]:  interface: no interface to check
Oct 11 05:13:24 IQ138000 watchdog[4640]:  temperature: no sensors to check
Oct 11 05:13:24 IQ138000 watchdog[4640]:  no test binary files
Oct 11 05:13:24 IQ138000 watchdog[4640]:  no repair binary files
Oct 11 05:13:24 IQ138000 watchdog[4640]:  error retry time-out = 30 seconds
Oct 11 05:13:24 IQ138000 watchdog[4640]:  repair attempts = 1
Oct 11 05:13:24 IQ138000 watchdog[4640]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:13:24 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:13:24 IQ138000 watchdog[4640]: watchdog now set to 60 seconds
Oct 11 05:13:24 IQ138000 watchdog[4640]: hardware watchdog identity: WBEC WDT
Oct 11 05:13:24 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:13:24 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:13:24 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:13:24 IQ138000 systemd[1]: Startup finished in 3.792s (kernel) + 51.258s (userspace) = 55.050s.
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 4 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:13:24 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:25 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:25 IQ138000 wb-rules[4568]: INFO: driver is ready
Oct 11 05:13:25 IQ138000 wb-rules[4568]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:13:25 IQ138000 wb-rules[4568]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4568: MQTT connection established
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:25 IQ138000 wb-rules[4568]: INFO: [engine] Starting main loop
Oct 11 05:13:25 IQ138000 wb-rules[4568]: INFO: [engine] Starting sync loop
Oct 11 05:13:25 IQ138000 wb-rules[4568]: INFO: the engine is ready
Oct 11 05:13:25 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 9 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:26 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:26 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-rules[4568]: WARNING: [rule warning] DAC: no config file
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:13:27 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:27 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 NetworkManager[406]: <info>  [1760159608.4912] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:13:28 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, fe:ab:e1:6f:fc:2d
Oct 11 05:13:28 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:13:28 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:13:28 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:13:28 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:13:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:13:28 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:13:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:13:28 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:13:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:13:28 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:13:28 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:13:28 IQ138000 systemd-udevd[4969]: Using default interface naming scheme 'v247'.
Oct 11 05:13:28 IQ138000 systemd-udevd[4969]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:13:28 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:28 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:28 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:13:29 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 knxd[5003]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:13:29 IQ138000 knxd[5003]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:13:29 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:13:29 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:13:29 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:13:29 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:29 IQ138000 python3[1972]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:13:29 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-rules[4568]: INFO: all rule files are loaded
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:13:30 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:13:30 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:31 IQ138000 wb-gsm[5036]: mm_on: Waiting for modem to start
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:31 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:31 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:32 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 npm[3649]: [2025-10-11 05:13:33] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 npm[3649]: [2025-10-11 05:13:33] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:13:33 IQ138000 npm[3649]: [2025-10-11 05:13:33] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:33 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:34 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:13:34 IQ138000 npm[3649]: [2025-10-11 05:13:34] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:13:34 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:13:35 IQ138000 npm[3649]: [2025-10-11 05:13:35] info:         zh:zstack:znp: Serialport opened
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:13:35 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:36 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:13:37 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:37 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:13:37.388+00:00
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:13:37.388Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159797411,"cmd_timestamp_ms":1760159617411,"source":"schedule"}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159797411,"cmd_timestamp_ms":1760159617411,"source":"schedule"}
Oct 11 05:13:37 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:13:37.635+00:00
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:13:37.635Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159797656,"cmd_timestamp_ms":1760159617656,"source":"schedule"}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159797656,"cmd_timestamp_ms":1760159617656,"source":"schedule"}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:13:37.788+00:00
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:13:37.788Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159797807,"cmd_timestamp_ms":1760159617807,"source":"schedule"}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159797807,"cmd_timestamp_ms":1760159617807,"source":"schedule"}
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: Currently 4 devices are joined.
Oct 11 05:13:37 IQ138000 npm[3649]: [2025-10-11 05:13:37] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:13:37 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:37 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:13:37.951+00:00
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:13:37.951Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159797967,"cmd_timestamp_ms":1760159617967,"source":"schedule"}
Oct 11 05:13:37 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159797967,"cmd_timestamp_ms":1760159617967,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:13:38.083+00:00
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:13:38.083Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798110,"cmd_timestamp_ms":1760159618110,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798110,"cmd_timestamp_ms":1760159618110,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:13:38.237+00:00
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:13:38.237Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798262,"cmd_timestamp_ms":1760159618262,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798262,"cmd_timestamp_ms":1760159618262,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:38 IQ138000 npm[3649]: [2025-10-11 05:13:38] info:         z2m: Connected to MQTT server
Oct 11 05:13:38 IQ138000 npm[3649]: [2025-10-11 05:13:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:13:38.407+00:00
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:13:38.407Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798431,"cmd_timestamp_ms":1760159618431,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798431,"cmd_timestamp_ms":1760159618431,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:13:38 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:13:38.619+00:00
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:13:38.619Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798647,"cmd_timestamp_ms":1760159618647,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159798647,"cmd_timestamp_ms":1760159618647,"source":"schedule"}
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:13:38 IQ138000 wb-rules[4568]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:13:38 IQ138000 wb-rules[4568]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:13:38 IQ138000 wb-rules[4568]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:13:38 IQ138000 wb-rules[4568]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:38 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:38 IQ138000 npm[3649]: [2025-10-11 05:13:38] info:         z2m: Started frontend on port 8282
Oct 11 05:13:38 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:13:38 IQ138000 npm[3649]: [2025-10-11 05:13:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:13:38 IQ138000 npm[3649]: [2025-10-11 05:13:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:13:39 IQ138000 npm[3649]: [2025-10-11 05:13:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:13:39 IQ138000 npm[3649]: [2025-10-11 05:13:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:13:39 IQ138000 npm[3649]: [2025-10-11 05:13:39] info:         z2m: Zigbee2MQTT started!
Oct 11 05:13:39 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:13:39.227+00:00
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:13:39.227Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159799255,"cmd_timestamp_ms":1760159619255,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159799255,"cmd_timestamp_ms":1760159619255,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:13:39.293+00:00
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:13:39 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:13:39 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:13:39.293Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:39 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159799320,"cmd_timestamp_ms":1760159619320,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159799320,"cmd_timestamp_ms":1760159619320,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:13:39 IQ138000 knxd[5193]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:13:39 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:13:39 IQ138000 knxd[5193]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:13:39 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:13:39 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:13:39 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:13:39.446+00:00
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:13:39.446Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:39 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159799464,"cmd_timestamp_ms":1760159619464,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159799464,"cmd_timestamp_ms":1760159619464,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:39 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:13:39.601+00:00
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:13:39.601Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760159799611,"cmd_timestamp_ms":1760159619611,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760159799611,"cmd_timestamp_ms":1760159619611,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:13:39.790+00:00
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:13:39.790Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760159799800,"cmd_timestamp_ms":1760159619800,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760159799800,"cmd_timestamp_ms":1760159619800,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:13:39.966+00:00
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:13:39 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:13:39.966Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159799979,"cmd_timestamp_ms":1760159619979,"source":"schedule"}
Oct 11 05:13:39 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159799979,"cmd_timestamp_ms":1760159619979,"source":"schedule"}
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:13:40.161+00:00
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:13:40.161Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159800171,"cmd_timestamp_ms":1760159620171,"source":"schedule"}
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159800171,"cmd_timestamp_ms":1760159620171,"source":"schedule"}
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:13:40 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:13:40 IQ138000 wb-mqtt-serial[1681]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:13:40 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:13:41 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:13:41 IQ138000 wb-rules[4568]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:13:41 IQ138000 wb-watchdog[5266]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:13:41 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:41 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:41 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:13:41 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:13:41 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:13:42 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:43 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:44 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:45 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:45 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:45 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:13:45 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:13:45 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:13:45 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:46 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:48 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:48 IQ138000 ModemManager[469]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:13:48 IQ138000 ModemManager[469]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:13:49 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:49 IQ138000 ModemManager[469]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:13:49 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:13:49 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:13:49 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:13:49 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:13:49 IQ138000 knxd[5384]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:13:49 IQ138000 knxd[5384]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:13:49 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:13:49 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:13:49 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:13:49 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:13:50 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:13:50 IQ138000 python3[1972]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:13:50 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:13:50 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:13:50 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:13:50 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:13:50 IQ138000 ModemManager[469]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7565] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7596] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7616] device (ttyUSB1): modem state 'enabling'
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7647] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7667] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7826] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7834] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:50 IQ138000 NetworkManager[406]: <info>  [1760159630.7855] manager: NetworkManager state is now CONNECTING
Oct 11 05:13:50 IQ138000 ModemManager[469]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:13:50 IQ138000 wb-mqtt-nm-helper[2066]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:13:50 IQ138000 ModemManager[469]: <info>  [modem0] power state updated: on
Oct 11 05:13:51 IQ138000 python3[1972]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:13:51 IQ138000 python3[1972]:    --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:13:51 IQ138000 python3[1972]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:13:51 IQ138000 python3[1972]:            |                model: A7602E-H
Oct 11 05:13:51 IQ138000 python3[1972]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:13:51 IQ138000 python3[1972]:            |            supported: gsm-umts
Oct 11 05:13:51 IQ138000 python3[1972]:            |              current: gsm-umts
Oct 11 05:13:51 IQ138000 python3[1972]:            |         equipment id: 860803062234204
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   System   |               device: wbc
Oct 11 05:13:51 IQ138000 python3[1972]:            |              drivers: option, rndis_host
Oct 11 05:13:51 IQ138000 python3[1972]:            |               plugin: simtech
Oct 11 05:13:51 IQ138000 python3[1972]:            |         primary port: ttyUSB1
Oct 11 05:13:51 IQ138000 python3[1972]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:13:51 IQ138000 python3[1972]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:13:51 IQ138000 python3[1972]:            |                state: enabling
Oct 11 05:13:51 IQ138000 python3[1972]:            |          power state: on
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:13:51 IQ138000 python3[1972]:            |              current: allowed: any; preferred: none
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   3GPP     |                 imei: 860803062234204
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:13:51 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:13:51 IQ138000 python3[1972]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:13:51 IQ138000 python3[1972]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:13:51 IQ138000 python3[1972]:            |                       slot 2: none
Oct 11 05:13:51 IQ138000 python3[1972]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:13:51 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:51 IQ138000 python3[1972]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:13:51 IQ138000 python3[1972]:  successfully requested primary SIM switch in modem
Oct 11 05:13:51 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:13:52 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:13:52 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:13:52 IQ138000 wb-rules[4568]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:13:53 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:13:53 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:13:53 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:13:53 IQ138000 lsyncd[5432]: 05:13:53 Normal: --- Startup ---
Oct 11 05:13:53 IQ138000 lsyncd[5432]: 05:13:53 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:13:53 IQ138000 lsyncd[5432]: journal
Oct 11 05:13:53 IQ138000 lsyncd[5432]: iq_network_manager/iq_network_manager.log
Oct 11 05:13:53 IQ138000 lsyncd[5432]: messages
Oct 11 05:13:53 IQ138000 lsyncd[5434]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:13:53 IQ138000 lsyncd[5433]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:13:53 IQ138000 lsyncd[5433]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:13:53 IQ138000 lsyncd[5432]: 05:13:53 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:13:53 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:13:53 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:13:53 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:13:53 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:53 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:13:54 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:13:54 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:13:54 IQ138000 wb-rules[4568]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] simple connect started...
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:13:55 IQ138000 NetworkManager[406]: <info>  [1760159635.4508] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:55 IQ138000 NetworkManager[406]: <info>  [1760159635.4520] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:13:55 IQ138000 NetworkManager[406]: <info>  [1760159635.4568] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:13:55 IQ138000 NetworkManager[406]: <info>  [1760159635.4591] ppp-manager: starting PPP connection
Oct 11 05:13:55 IQ138000 NetworkManager[406]: <info>  [1760159635.4730] ppp-manager: pppd started with pid 5452
Oct 11 05:13:55 IQ138000 pppd[5452]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:13:55 IQ138000 NetworkManager[5452]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: initializing
Oct 11 05:13:55 IQ138000 pppd[5452]: pppd 2.4.9 started by root, uid 0
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:13:55 IQ138000 pppd[5452]: Using interface ppp0
Oct 11 05:13:55 IQ138000 NetworkManager[5452]: Using interface ppp0
Oct 11 05:13:55 IQ138000 NetworkManager[5452]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:13:55 IQ138000 pppd[5452]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:13:55 IQ138000 NetworkManager[406]: <info>  [1760159635.5444] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:13:55 IQ138000 pppd[5452]: PAP authentication succeeded
Oct 11 05:13:55 IQ138000 NetworkManager[5452]: PAP authentication succeeded
Oct 11 05:13:55 IQ138000 NetworkManager[5452]: kernel does not support PPP filtering
Oct 11 05:13:55 IQ138000 pppd[5452]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:13:55 IQ138000 pppd[5452]: kernel does not support PPP filtering
Oct 11 05:13:55 IQ138000 vnstatd[1664]: Info: Interface "ppp0" enabled.
Oct 11 05:13:55 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:13:55 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:13:55 IQ138000 ModemManager[469]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:13:56 IQ138000 pppd[5452]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:13:56 IQ138000 NetworkManager[5452]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:13:56 IQ138000 pppd[5452]: local  IP address 10.169.15.129
Oct 11 05:13:56 IQ138000 NetworkManager[5452]: local  IP address 10.169.15.129
Oct 11 05:13:56 IQ138000 NetworkManager[5452]: remote IP address 10.64.64.64
Oct 11 05:13:56 IQ138000 NetworkManager[5452]: primary   DNS address 172.23.10.131
Oct 11 05:13:56 IQ138000 NetworkManager[5452]: secondary DNS address 172.23.10.130
Oct 11 05:13:56 IQ138000 pppd[5452]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:13:56 IQ138000 pppd[5452]: remote IP address 10.64.64.64
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.0949] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:13:56 IQ138000 pppd[5452]: primary   DNS address 172.23.10.131
Oct 11 05:13:56 IQ138000 pppd[5452]: secondary DNS address 172.23.10.130
Oct 11 05:13:56 IQ138000 pppd[5452]: nm-ppp-plugin: ip-up event
Oct 11 05:13:56 IQ138000 pppd[5452]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.1040] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.1065] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.1093] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.1137] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:13:56 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:13:56 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.1561] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:56 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:13:56 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:13:56 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:13:56 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.2478] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.2490] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.2510] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.2528] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:13:56 IQ138000 NetworkManager[406]: <info>  [1760159636.2560] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:13:56 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:56 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:56 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:57 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:57 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:57 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:57 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:13:58 IQ138000 ntpd[1655]: Listen normally on 4 ppp0 10.169.15.129:123
Oct 11 05:13:58 IQ138000 ntpd[1655]: new interface(s) found: waking up resolver
Oct 11 05:13:58 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:58 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:13:58 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:58 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:58 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:13:59 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:59 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:13:59 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:13:59 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:13:59 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:13:59 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:13:59 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:13:59 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:13:59 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:13:59 IQ138000 wb-mqtt-knx[2029]: INFO: knxd connected successfully
Oct 11 05:14:00 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:01 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:01 IQ138000 python3[1972]: Выполнение: mmcli -i any
Oct 11 05:14:01 IQ138000 python3[1972]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:14:01 IQ138000 python3[1972]:    -------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:01 IQ138000 python3[1972]:   -------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Properties |            active: yes
Oct 11 05:14:01 IQ138000 python3[1972]:              |              imsi: 250997340491874
Oct 11 05:14:01 IQ138000 python3[1972]:              |             iccid: 8970199210429593744
Oct 11 05:14:01 IQ138000 python3[1972]:              |       operator id: 25099
Oct 11 05:14:01 IQ138000 python3[1972]:              |     operator name: Beeline
Oct 11 05:14:01 IQ138000 python3[1972]: Выполнение: mmcli -m wbc
Oct 11 05:14:01 IQ138000 python3[1972]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:14:01 IQ138000 python3[1972]:    --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:14:01 IQ138000 python3[1972]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:14:01 IQ138000 python3[1972]:            |                model: A7602E-H
Oct 11 05:14:01 IQ138000 python3[1972]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:14:01 IQ138000 python3[1972]:            |            supported: gsm-umts
Oct 11 05:14:01 IQ138000 python3[1972]:            |              current: gsm-umts
Oct 11 05:14:01 IQ138000 python3[1972]:            |         equipment id: 860803062234204
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   System   |               device: wbc
Oct 11 05:14:01 IQ138000 python3[1972]:            |              drivers: option, rndis_host
Oct 11 05:14:01 IQ138000 python3[1972]:            |               plugin: simtech
Oct 11 05:14:01 IQ138000 python3[1972]:            |         primary port: ttyUSB1
Oct 11 05:14:01 IQ138000 python3[1972]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:14:01 IQ138000 python3[1972]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:14:01 IQ138000 python3[1972]:            |                state: connected
Oct 11 05:14:01 IQ138000 python3[1972]:            |          power state: on
Oct 11 05:14:01 IQ138000 python3[1972]:            |          access tech: lte
Oct 11 05:14:01 IQ138000 python3[1972]:            |       signal quality: 90% (recent)
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:14:01 IQ138000 python3[1972]:            |              current: allowed: any; preferred: none
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   3GPP     |                 imei: 860803062234204
Oct 11 05:14:01 IQ138000 python3[1972]:            |          operator id: 25099
Oct 11 05:14:01 IQ138000 python3[1972]:            |        operator name: beeline
Oct 11 05:14:01 IQ138000 python3[1972]:            |         registration: home
Oct 11 05:14:01 IQ138000 python3[1972]:            | packet service state: attached
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:01 IQ138000 python3[1972]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:14:01 IQ138000 python3[1972]:            |                       slot 2: none
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:14:01 IQ138000 python3[1972]: Current state: home
Oct 11 05:14:01 IQ138000 python3[1972]: SIM registered in the network.
Oct 11 05:14:01 IQ138000 python3[1972]: Выполнение: mmcli -m wbc
Oct 11 05:14:01 IQ138000 python3[1972]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:14:01 IQ138000 python3[1972]:    --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:14:01 IQ138000 python3[1972]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:14:01 IQ138000 python3[1972]:            |                model: A7602E-H
Oct 11 05:14:01 IQ138000 python3[1972]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:14:01 IQ138000 python3[1972]:            |            supported: gsm-umts
Oct 11 05:14:01 IQ138000 python3[1972]:            |              current: gsm-umts
Oct 11 05:14:01 IQ138000 python3[1972]:            |         equipment id: 860803062234204
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   System   |               device: wbc
Oct 11 05:14:01 IQ138000 python3[1972]:            |              drivers: option, rndis_host
Oct 11 05:14:01 IQ138000 python3[1972]:            |               plugin: simtech
Oct 11 05:14:01 IQ138000 python3[1972]:            |         primary port: ttyUSB1
Oct 11 05:14:01 IQ138000 python3[1972]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:14:01 IQ138000 python3[1972]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:14:01 IQ138000 python3[1972]:            |                state: connected
Oct 11 05:14:01 IQ138000 python3[1972]:            |          power state: on
Oct 11 05:14:01 IQ138000 python3[1972]:            |          access tech: lte
Oct 11 05:14:01 IQ138000 python3[1972]:            |       signal quality: 90% (recent)
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:14:01 IQ138000 python3[1972]:            |              current: allowed: any; preferred: none
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   3GPP     |                 imei: 860803062234204
Oct 11 05:14:01 IQ138000 python3[1972]:            |          operator id: 25099
Oct 11 05:14:01 IQ138000 python3[1972]:            |        operator name: beeline
Oct 11 05:14:01 IQ138000 python3[1972]:            |         registration: home
Oct 11 05:14:01 IQ138000 python3[1972]:            | packet service state: attached
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:01 IQ138000 python3[1972]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:14:01 IQ138000 python3[1972]:            |                       slot 2: none
Oct 11 05:14:01 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:14:01 IQ138000 python3[1972]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:01 IQ138000 python3[1972]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:14:01 IQ138000 python3[1972]:    -------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:01 IQ138000 python3[1972]:   -------------------------------
Oct 11 05:14:01 IQ138000 python3[1972]:   Properties |            active: yes
Oct 11 05:14:01 IQ138000 python3[1972]:              |              imsi: 250997340491874
Oct 11 05:14:01 IQ138000 python3[1972]:              |             iccid: 8970199210429593744
Oct 11 05:14:01 IQ138000 python3[1972]:              |       operator id: 25099
Oct 11 05:14:01 IQ138000 python3[1972]:              |     operator name: Beeline
Oct 11 05:14:01 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:03 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:14:03 IQ138000 ntpd[1655]: Soliciting pool server 51.250.35.68
Oct 11 05:14:03 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:04 IQ138000 ntpd[1655]: Soliciting pool server 62.113.114.46
Oct 11 05:14:04 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:05 IQ138000 ntpd[1655]: Soliciting pool server 162.159.200.123
Oct 11 05:14:05 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:06 IQ138000 ntpd[1655]: Soliciting pool server 194.147.35.143
Oct 11 05:14:06 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:14:06 IQ138000 python3[1972]: Выполнение: mmcli -m wbc
Oct 11 05:14:06 IQ138000 python3[1972]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:14:06 IQ138000 python3[1972]:    --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:14:06 IQ138000 python3[1972]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:14:06 IQ138000 python3[1972]:            |                model: A7602E-H
Oct 11 05:14:06 IQ138000 python3[1972]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:14:06 IQ138000 python3[1972]:            |            supported: gsm-umts
Oct 11 05:14:06 IQ138000 python3[1972]:            |              current: gsm-umts
Oct 11 05:14:06 IQ138000 python3[1972]:            |         equipment id: 860803062234204
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   System   |               device: wbc
Oct 11 05:14:06 IQ138000 python3[1972]:            |              drivers: option, rndis_host
Oct 11 05:14:06 IQ138000 python3[1972]:            |               plugin: simtech
Oct 11 05:14:06 IQ138000 python3[1972]:            |         primary port: ttyUSB1
Oct 11 05:14:06 IQ138000 python3[1972]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:14:06 IQ138000 python3[1972]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:14:06 IQ138000 python3[1972]:            |                state: connected
Oct 11 05:14:06 IQ138000 python3[1972]:            |          power state: on
Oct 11 05:14:06 IQ138000 python3[1972]:            |          access tech: lte
Oct 11 05:14:06 IQ138000 python3[1972]:            |       signal quality: 93% (recent)
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:14:06 IQ138000 python3[1972]:            |              current: allowed: any; preferred: none
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   3GPP     |                 imei: 860803062234204
Oct 11 05:14:06 IQ138000 python3[1972]:            |          operator id: 25099
Oct 11 05:14:06 IQ138000 python3[1972]:            |        operator name: beeline
Oct 11 05:14:06 IQ138000 python3[1972]:            |         registration: home
Oct 11 05:14:06 IQ138000 python3[1972]:            | packet service state: attached
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:06 IQ138000 python3[1972]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:14:06 IQ138000 python3[1972]:            |                       slot 2: none
Oct 11 05:14:06 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:14:06 IQ138000 python3[1972]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:06 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:14:06 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:14:06 IQ138000 python3[1972]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:14:06 IQ138000 python3[1972]:    -------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:06 IQ138000 python3[1972]:   -------------------------------
Oct 11 05:14:06 IQ138000 python3[1972]:   Properties |            active: yes
Oct 11 05:14:06 IQ138000 python3[1972]:              |              imsi: 250997340491874
Oct 11 05:14:06 IQ138000 python3[1972]:              |             iccid: 8970199210429593744
Oct 11 05:14:06 IQ138000 python3[1972]:              |       operator id: 25099
Oct 11 05:14:06 IQ138000 python3[1972]:              |     operator name: Beeline
Oct 11 05:14:06 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:07 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 ntpd[1655]: Soliciting pool server 46.138.254.88
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:14:08 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:14:09 IQ138000 ntpd[1655]: Soliciting pool server 94.228.114.152
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:14:09 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:14:10 IQ138000 ntpd[1655]: Soliciting pool server 85.142.100.8
Oct 11 05:14:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:14:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:14:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:14:10 IQ138000 wb-mqtt-serial[1681]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:14:10 IQ138000 wb-mqtt-serial[1681]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:14:10 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:11 IQ138000 ntpd[1655]: Soliciting pool server 217.170.87.229
Oct 11 05:14:11 IQ138000 wb-mqtt-serial[1681]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:14:11 IQ138000 python3[1972]: Выполнение: mmcli -m wbc
Oct 11 05:14:11 IQ138000 python3[1972]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:14:11 IQ138000 python3[1972]:    --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:14:11 IQ138000 python3[1972]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:14:11 IQ138000 python3[1972]:            |                model: A7602E-H
Oct 11 05:14:11 IQ138000 python3[1972]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:14:11 IQ138000 python3[1972]:            |            supported: gsm-umts
Oct 11 05:14:11 IQ138000 python3[1972]:            |              current: gsm-umts
Oct 11 05:14:11 IQ138000 python3[1972]:            |         equipment id: 860803062234204
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   System   |               device: wbc
Oct 11 05:14:11 IQ138000 python3[1972]:            |              drivers: option, rndis_host
Oct 11 05:14:11 IQ138000 python3[1972]:            |               plugin: simtech
Oct 11 05:14:11 IQ138000 python3[1972]:            |         primary port: ttyUSB1
Oct 11 05:14:11 IQ138000 python3[1972]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:14:11 IQ138000 python3[1972]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:14:11 IQ138000 python3[1972]:            |                state: connected
Oct 11 05:14:11 IQ138000 python3[1972]:            |          power state: on
Oct 11 05:14:11 IQ138000 python3[1972]:            |          access tech: lte
Oct 11 05:14:11 IQ138000 python3[1972]:            |       signal quality: 93% (recent)
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:14:11 IQ138000 python3[1972]:            |              current: allowed: any; preferred: none
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   3GPP     |                 imei: 860803062234204
Oct 11 05:14:11 IQ138000 python3[1972]:            |          operator id: 25099
Oct 11 05:14:11 IQ138000 python3[1972]:            |        operator name: beeline
Oct 11 05:14:11 IQ138000 python3[1972]:            |         registration: home
Oct 11 05:14:11 IQ138000 python3[1972]:            | packet service state: attached
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:14:11 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:11 IQ138000 python3[1972]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:11 IQ138000 python3[1972]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:14:12 IQ138000 python3[1972]:            |                       slot 2: none
Oct 11 05:14:12 IQ138000 python3[1972]:   --------------------------------
Oct 11 05:14:12 IQ138000 python3[1972]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:14:12 IQ138000 python3[1972]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:12 IQ138000 python3[1972]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:14:12 IQ138000 python3[1972]:    -------------------------------
Oct 11 05:14:12 IQ138000 python3[1972]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:14:12 IQ138000 python3[1972]:   -------------------------------
Oct 11 05:14:12 IQ138000 python3[1972]:   Properties |            active: yes
Oct 11 05:14:12 IQ138000 python3[1972]:              |              imsi: 250997340491874
Oct 11 05:14:12 IQ138000 python3[1972]:              |             iccid: 8970199210429593744
Oct 11 05:14:12 IQ138000 python3[1972]:              |       operator id: 25099
Oct 11 05:14:12 IQ138000 python3[1972]:              |     operator name: Beeline
-- Boot 590ed65d64f04ea7a24d6f71e44bad24 --
Oct 11 05:15:40 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:15:40 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:15:40 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:15:40 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:15:40 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:15:40 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:15:40 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:15:40 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:15:40 IQ138000 kernel: Zone ranges:
Oct 11 05:15:40 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:15:40 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:15:40 IQ138000 kernel: Movable zone start for each node
Oct 11 05:15:40 IQ138000 kernel: Early memory node ranges
Oct 11 05:15:40 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:15:40 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:15:40 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:15:40 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:15:40 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:15:40 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:15:40 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:15:40 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:15:40 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:15:40 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:15:40 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:15:40 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:15:40 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:15:40 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:15:40 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:15:40 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:15:40 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:15:40 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:15:40 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:15:40 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:15:40 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:15:40 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:15:40 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:15:40 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:15:40 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:15:40 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:15:40 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:15:40 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:15:40 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:15:40 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:15:40 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:15:40 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:15:40 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:15:40 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:15:40 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:15:40 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:15:40 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:15:40 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:15:40 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:15:40 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:15:40 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:15:40 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:15:40 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:15:40 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:15:40 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:15:40 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:15:40 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:15:40 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:15:40 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:15:40 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:15:40 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:15:40 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:15:40 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:15:40 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:15:40 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:15:40 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:15:40 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:15:40 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:15:40 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:15:40 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:15:40 IQ138000 kernel: No ATAGs?
Oct 11 05:15:40 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:15:40 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:15:40 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:15:40 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:15:40 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:15:40 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:15:40 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:15:40 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:15:40 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:15:40 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:15:40 IQ138000 kernel: PTP clock support registered
Oct 11 05:15:40 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:15:40 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:15:40 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:15:40 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:15:40 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:15:40 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:15:40 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:15:40 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:15:40 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:15:40 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:15:40 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:15:40 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:15:40 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:15:40 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:15:40 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:15:40 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:15:40 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:15:40 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:15:40 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:15:40 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:15:40 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:15:40 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:15:40 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:15:40 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:15:40 IQ138000 kernel: brd: module loaded
Oct 11 05:15:40 IQ138000 kernel: loop: module loaded
Oct 11 05:15:40 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:15:40 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:15:40 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:15:40 IQ138000 kernel: CAN device driver interface
Oct 11 05:15:40 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:15:40 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:15:40 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:15:40 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:15:40 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:15:40 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:15:40 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:15:40 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:15:40 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:15:40 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:15:40 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:15:40 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:15:40 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:15:40 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:15:40 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:15:40 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:15:40 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:15:40 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:15:40 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:15:40 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:15:40 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:15:40 IQ138000 kernel: can: controller area network core
Oct 11 05:15:40 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:15:40 IQ138000 kernel: can: raw protocol
Oct 11 05:15:40 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:15:40 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:15:40 IQ138000 kernel: can: SAE J1939
Oct 11 05:15:40 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:15:40 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:15:40 IQ138000 kernel: registered taskstats version 1
Oct 11 05:15:40 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:15:40 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:15:40 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:15:40 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:15:40 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:15:40 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:15:40 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:15:40 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:15:40 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:15:36 UTC (1760159736)
Oct 11 05:15:40 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:15:40 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:15:40 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:15:40 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:15:40 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:15:40 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:15:40 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:15:40 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:15:40 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:15:40 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:15:40 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:15:40 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:15:40 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:15:40 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:15:40 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: random: fast init done
Oct 11 05:15:40 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:15:40 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:15:40 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:15:40 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:15:40 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:15:40 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:15:40 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:15:40 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:15:40 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:15:40 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:15:40 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:15:40 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:15:40 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:15:40 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:15:40 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:15:40 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:15:40 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:15:40 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:15:40 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:15:40 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:15:40 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:15:40 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:15:40 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:15:40 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:15:40 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:15:40 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:15:40 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:15:40 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:15:40 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:15:40 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:15:40 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:15:40 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:15:40 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:15:40 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:15:40 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:15:40 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:15:40 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:15:40 IQ138000 kernel: of_cfs_init
Oct 11 05:15:40 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:15:40 IQ138000 kernel: ALSA device list:
Oct 11 05:15:40 IQ138000 kernel:   No soundcards found.
Oct 11 05:15:40 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:15:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:15:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:15:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:15:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:15:40 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:15:40 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:15:40 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:15:40 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:15:40 IQ138000 kernel:   with arguments:
Oct 11 05:15:40 IQ138000 kernel:     /sbin/init
Oct 11 05:15:40 IQ138000 kernel:   with environment:
Oct 11 05:15:40 IQ138000 kernel:     HOME=/
Oct 11 05:15:40 IQ138000 kernel:     TERM=linux
Oct 11 05:15:40 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:15:40 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:15:40 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:15:40 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:15:40 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:15:40 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:15:40 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:15:40 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:15:40 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:15:40 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:15:40 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:15:40 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:15:40 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:15:40 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:15:40 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:15:40 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:15:40 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:15:40 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:15:40 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:15:40 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:15:40 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:15:40 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:15:40 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:15:40 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:15:40 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:15:40 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:15:40 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:15:40 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:15:40 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:15:40 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:15:40 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:15:40 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:15:40 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:15:40 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:15:40 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:15:40 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:15:40 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:15:40 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:15:40 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:15:40 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:15:40 IQ138000 systemd-journald[140]: Journal started
Oct 11 05:15:40 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:15:40 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:15:40 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:15:40 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:15:40 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:15:40 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:15:40 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:15:40 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:15:40 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:15:40 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:15:41 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:15:41 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:15:41 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:15:41 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:15:41 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:15:41 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:15:41 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:15:41 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:15:41 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:15:41 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:15:41 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:15:41 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:15:41 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:15:41 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:15:41 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:15:41 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:15:41 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:15:42 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 05:15:42 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:15:42 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:15:42 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:15:42 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:15:42 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:15:42 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:15:42 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:15:42 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:15:42 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 05:15:42 IQ138000 systemd-udevd[160]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:15:42 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:15:42 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:15:42 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:15:42 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:15:42 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:15:42 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:15:42 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:15:42 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:15:42 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:15:42 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:15:43 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:15:43 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:15:43 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:15:43 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:15:43 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:15:43 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:15:43 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:15:43 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 05:15:43 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 05:15:43 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:15:43 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:15:43 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:15:43 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:15:43 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:15:43 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:15:43 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:15:43 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:15:43 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:15:43 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:15:43 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:15:43 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:15:43 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:15:43 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:15:43 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:15:43 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:15:43 IQ138000 systemd-fsck[213]: data: recovering journal
Oct 11 05:15:43 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:15:43 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:15:43 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:15:43 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:15:43 IQ138000 systemd-fsck[213]: data: clean, 16450/328656 files, 359532/1313536 blocks
Oct 11 05:15:43 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:15:43 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:15:43 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:15:43 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:15:43 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:15:43 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:15:43 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:15:43 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:15:44 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:15:44 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.050ms for 462 entries.
Oct 11 05:15:44 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 450.3M, max 496.6M, 46.3M free.
Oct 11 05:15:44 IQ138000 kernel: random: crng init done
Oct 11 05:15:44 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:15:44 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:15:44 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 05:15:44 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:15:44 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:15:44 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:15:44 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:15:44 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:15:44 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:15:44 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:15:45 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:15:45 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:15:45 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:15:45 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:15:45 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:15:45 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:15:45 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:15:45 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:15:45 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:15:45 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:15:45 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:15:45 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:15:45 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:15:45 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:15:45 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:15:45 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:15:45 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:15:45 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:15:45 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:15:45 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:15:45 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:15:45 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:15:45 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:15:45 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:15:45 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 05:15:45 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:15:45 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:15:45 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:15:45 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 05:15:45 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:15:45 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:15:45 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:15:45 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:15:45 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:15:45 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 05:15:45 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:15:45 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:15:45 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 05:15:45 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:15:45 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:15:45 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:15:45 IQ138000 migrate.sh[317]: Error: No such file or directory
Oct 11 05:15:45 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:15:46 IQ138000 wb-watchdog[327]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:15:46 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:15:46 IQ138000 migrate.sh[325]: Error: No such file or directory
Oct 11 05:15:46 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:15:46 IQ138000 migrate.sh[338]: Error: No such file or directory
Oct 11 05:15:46 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:15:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:15:46 IQ138000 reverse-ssh.sh[351]: Error: No such file or directory
Oct 11 05:15:46 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:15:46 IQ138000 migrate.sh[354]: Error: No such file or directory
Oct 11 05:15:46 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:15:46 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:15:46 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:15:46 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:15:46 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:15:46 IQ138000 migrate.sh[365]: Error: No such file or directory
Oct 11 05:15:46 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:15:46 IQ138000 rules-preprocessor[335]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:15:46 IQ138000 rules-preprocessor[335]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:15:46 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:15:46 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Successfully dropped root privileges.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: avahi-daemon 0.8 starting up.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Successfully called chroot().
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Successfully dropped remaining capabilities.
Oct 11 05:15:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: No service file found in /etc/avahi/services.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Network interface enumeration completed.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Registering new address record for ::1 on lo.*.
Oct 11 05:15:46 IQ138000 avahi-daemon[371]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:15:46 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:15:46 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:15:46 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:15:46 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 05:15:46 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:15:46 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:15:46 IQ138000 wpa_supplicant[379]: Successfully initialized wpa_supplicant
Oct 11 05:15:46 IQ138000 systemd-logind[344]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:15:46 IQ138000 systemd-logind[344]: New seat seat0.
Oct 11 05:15:46 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:46 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:15:46 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:15:46 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:15:46 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:46 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:15:46 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:15:46 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:15:46 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:15:46 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:15:46 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:46 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:15:46 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:15:46 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:15:46 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:15:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:15:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:15:46 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:15:47 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:15:47 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.1204] NetworkManager (version 1.42.4) is starting... (boot:590ed65d-64f0-4ea7-a24d-6f71e44bad24)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.1219] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.1379] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:15:47 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:15:47 IQ138000 monit[324]: Starting daemon monitor: monit.
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.1873] manager[0x6c6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:15:47 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:15:47 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:15:47 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:15:47 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:15:47 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:15:47 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:15:47 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:15:47 IQ138000 avahi-daemon[371]: Server startup complete. Host name is IQ138000.local. Local service cookie is 39842118.
Oct 11 05:15:47 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:15:47 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:15:47 IQ138000 ModemManager[479]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:15:47 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:15:47 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.8695] hostname: hostname: using hostnamed
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.8698] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.8731] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.8814] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.8845] manager[0x6c6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.8847] manager[0x6c6900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:15:47 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9251] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9357] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9393] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9638] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9696] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9760] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9785] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9805] manager: Networking is enabled by state file
Oct 11 05:15:47 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9876] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9889] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9899] ifupdown: management mode: unmanaged
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9909] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:15:47 IQ138000 NetworkManager[405]: <info>  [1760159747.9918] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:15:48 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.0558] dhcp: init: Using DHCP client 'internal'
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.0599] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.0850] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.0961] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:15:48 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:15:48 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.1233] device (lo): Activation: starting connection 'lo' (f0ae0b99-b9dc-4591-a09c-41b5a8df3ada)
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.1341] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.1390] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.4907] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.4926] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.4953] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.4999] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:15:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:15:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:15:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:15:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:15:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.7039] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.7125] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.7218] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:15:48 IQ138000 NetworkManager[405]: <info>  [1760159748.7262] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:15:48 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:15:49 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.5209] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.5254] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.5283] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6141] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6185] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6213] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6659] modem-manager: ModemManager available
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6667] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6831] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6847] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.6890] device (lo): Activation: successful, device activated.
Oct 11 05:15:49 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.9875] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.9883] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.9904] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.9922] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:15:49 IQ138000 NetworkManager[405]: <info>  [1760159749.9956] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0098] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0237] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0243] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0262] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0309] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0378] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:15:50 IQ138000 NetworkManager[405]: <info>  [1760159750.0508] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:50 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:15:50 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:15:50 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:15:53 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:15:53 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:15:53 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 05:15:53 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:53 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:15:53 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:15:53 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:15:53 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 05:15:53 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:54 IQ138000 init.sh[1320]: ...
Oct 11 05:15:54 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 05:15:54 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:54 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:15:54 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:15:54 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:15:54 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 05:15:54 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:54 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:15:54 IQ138000 init.sh[1320]: ...
Oct 11 05:15:54 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 05:15:54 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:55 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:15:55 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:15:55 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:15:55 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 05:15:55 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:55 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:15:55 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 05:15:55 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:15:55 IQ138000 init.sh[1320]: ...
Oct 11 05:15:55 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:15:55 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:15:55 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:15:55 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:15:55 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:15:56 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:15:56 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:15:56 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:15:56 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:15:56 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:15:56 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:15:56 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:15:56 IQ138000 lsyncd[1609]: 05:15:56 Normal: --- Startup ---
Oct 11 05:15:56 IQ138000 lsyncd[1609]: 05:15:56 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:15:56 IQ138000 lsyncd[1609]: journal
Oct 11 05:15:56 IQ138000 lsyncd[1609]: messages
Oct 11 05:15:56 IQ138000 lsyncd[1609]: iq_network_manager/iq_network_manager.log
Oct 11 05:15:56 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:15:56 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:15:56 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:15:56 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:15:56 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:15:56 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:15:56 IQ138000 ntpd[1620]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:15:56 IQ138000 ntpd[1620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:15:56 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:15:56 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:15:56 IQ138000 ntpd[1620]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:15:56 IQ138000 ntpd[1620]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:15:56 IQ138000 ntpd[1620]: corporation.  Support and training for ntp-4 are
Oct 11 05:15:56 IQ138000 ntpd[1620]: available at https://www.nwtime.org/support
Oct 11 05:15:56 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:15:56 IQ138000 lsyncd[1630]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:15:56 IQ138000 lsyncd[1618]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:15:56 IQ138000 lsyncd[1618]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:15:56 IQ138000 lsyncd[1609]: 05:15:56 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:15:56 IQ138000 ntpd[1644]: proto: precision = 1.041 usec (-20)
Oct 11 05:15:56 IQ138000 ntpd[1644]: basedate set to 2020-09-11
Oct 11 05:15:56 IQ138000 ntpd[1644]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:15:56 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:15:56 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:15:56 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:15:56 IQ138000 ntpd[1644]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:15:56 IQ138000 ntpd[1644]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:15:56 IQ138000 ntpd[1644]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:15:56 IQ138000 ntpd[1644]: Listen normally on 3 lo [::1]:123
Oct 11 05:15:56 IQ138000 ntpd[1644]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:15:56 IQ138000 persist_meter_data.sh[1643]: Error: No such file or directory
Oct 11 05:15:56 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:15:56 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:15:56 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:15:56 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:15:57 IQ138000 wb-connection-manager[1509]: Connection LegacyWiFi not found, skipping
Oct 11 05:15:57 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:15:57 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:15:57 IQ138000 wb-knxd-config.sh[1520]: No /dev/ttyKNX found, disabling level2
Oct 11 05:15:57 IQ138000 wb-knxd-config.sh[1520]: Restart knxd
Oct 11 05:15:57 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:15:57 IQ138000 wb-mqtt-w1[1677]: MQTT broker localhost:1883
Oct 11 05:15:57 IQ138000 wb-mqtt-w1[1677]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:15:57 IQ138000 wb-mqtt-w1[1677]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:15:57 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:15:57 IQ138000 wb-mqtt-w1[1677]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:15:57 IQ138000 wb-mqtt-w1[1677]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:15:57 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:15:57 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:15:57 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:15:57 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:15:57 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:15:57 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:15:57 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:57 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:15:57 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:15:57 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:15:57 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:15:57 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:57 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:15:57 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:15:57 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:15:57 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:15:57 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:15:57 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:15:57 IQ138000 ntpd[1644]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:15:57 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:15:57 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:15:57 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:15:57 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:15:57 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:15:57 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:15:57 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:15:57 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:15:57 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:15:57 IQ138000 vnstatd[1652]: Info: vnStat daemon 2.6 started. (pid:1652 uid:110 gid:117 64-bit)
Oct 11 05:15:57 IQ138000 vnstatd[1652]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:15:57 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:15:57 IQ138000 sshd[1742]: Server listening on 0.0.0.0 port 22.
Oct 11 05:15:57 IQ138000 sshd[1742]: Server listening on :: port 22.
Oct 11 05:15:57 IQ138000 vnstatd[1652]: Info: Interface "ppp0" disabled.
Oct 11 05:15:57 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:15:58 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:15:58 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:15:58 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:15:58 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:15:58 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <error> [1760159758.2830] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.2833] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1509 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:15:58 IQ138000 wb-connection-manager[1509]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:15:58 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:15:58 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:15:58 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:15:58 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:15:58 IQ138000 reverse-ssh.sh[1846]: Error: No such file or directory
Oct 11 05:15:58 IQ138000 wpa_supplicant[379]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:15:58 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:58 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:15:58 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:15:58 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:15:58 IQ138000 wb-adjust-systime[1839]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:15:58 IQ138000 ntpd[1644]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:15:58 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:15:58 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:15:58 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:15:58 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8150] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8156] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1509 uid=0 result="success"
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8163] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8185] manager: NetworkManager state is now CONNECTING
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8420] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8446] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.8448] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:15:58 IQ138000 mosquitto[1871]: 1760159758: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:15:58 IQ138000 wb-adjust-systime[1839]: Drift file is valid (was recently edited)
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9032] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:58 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9187] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9245] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9302] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9304] Config: added 'scan_ssid' value '1'
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9368] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9397] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:15:58 IQ138000 NetworkManager[405]: <info>  [1760159758.9399] Config: added 'psk' value '<hidden>'
Oct 11 05:15:58 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:15:58 IQ138000 knxd[1888]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:15:58 IQ138000 knxd[1888]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:15:58 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:15:59 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:15:59 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:15:59 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:15:59 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:15:59 IQ138000 NetworkManager[405]: <info>  [1760159759.1612] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:15:59 IQ138000 NetworkManager[405]: <info>  [1760159759.1615] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:15:59 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:15:59 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:15:59 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:15:59 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:15:59 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:15:59 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:15:59 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: MQTT broker localhost:1883
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:15:59 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:15:59 IQ138000 ntpd[1644]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:15:59 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: INFO: [sqlite] Create indices if necessary
Oct 11 05:15:59 IQ138000 wb-mqtt-db[1955]: INFO: [sqlite] Analyzing data table
Oct 11 05:15:59 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:15:59 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:15:59 IQ138000 wb-mqtt-knx[1974]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:15:59 IQ138000 wb-mqtt-knx[1974]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:15:59 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:15:59 IQ138000 wb-mqtt-logs[1981]: MQTT broker localhost:1883
Oct 11 05:15:59 IQ138000 wb-mqtt-logs[1981]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:15:59 IQ138000 wb-mqtt-logs[1981]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:16:00 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:16:00 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:16:00 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:16:00 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:16:00 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.545s CPU time.
Oct 11 05:16:00 IQ138000 ntpd[1644]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:16:00 IQ138000 wb-mqtt-confed[1950]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:16:00 IQ138000 wb-mqtt-confed[1950]: INFO: [wbgo_mqtt] confed-IQ138000-1950: MQTT connection established
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:16:00 IQ138000 wb-mqtt-opcua[2008]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:16:00 IQ138000 wb-mqtt-iec104[1962]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:16:01 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:16:01 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:16:01 IQ138000 wb-mqtt-logs[1981]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:01 IQ138000 wb-mqtt-logs[1981]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:01 IQ138000 wb-mqtt-logs[1981]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:01 IQ138000 wb-mqtt-logs[1981]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:16:01 IQ138000 wb-mqtt-opcua[2121]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:16:01 IQ138000 wb-mqtt-iec104[2130]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:16:01 IQ138000 wb-mqtt-mbgate[1990]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:16:01 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [gpio driver] Started
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:16:02 IQ138000 wb-mqtt-gpio[1851]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:16:02 IQ138000 wb-mqtt-opcua[2121]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:16:02 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:16:02 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:16:02 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:02 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:16:02 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:16:02 IQ138000 wb-mqtt-iec104[2130]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:16:02 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:16:02 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:16:02 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:16:03 IQ138000 wb-mqtt-knx[1974]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:03 IQ138000 wb-mqtt-knx[1974]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:03 IQ138000 wb-mqtt-knx[1974]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:03 IQ138000 wb-mqtt-knx[1974]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:16:03 IQ138000 wb-mqtt-knx[1974]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:16:04 IQ138000 python3[1928]: No data file found at /tmp/network_status_cache.json
Oct 11 05:16:04 IQ138000 python3[1928]: Connecting to MQTT
Oct 11 05:16:04 IQ138000 NetworkManager[405]: <info>  [1760159764.8872] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:16:04 IQ138000 NetworkManager[405]: <info>  [1760159764.8874] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:16:04 IQ138000 python3[1928]: Connected to MQTT
Oct 11 05:16:04 IQ138000 python3[1928]: Connection returned result: Connection Accepted.
Oct 11 05:16:05 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2005 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:16:05 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:16:06 IQ138000 wb-device-manager[1936]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:16:06 IQ138000 wb-device-manager[1936]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device lo f0ae0b99-b9dc-4591-a09c-41b5a8df3ada /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:16:06 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New active connection lo f0ae0b99-b9dc-4591-a09c-41b5a8df3ada /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:16:07 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:16:07 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:16:08 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:16:08 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:16:08 IQ138000 kernel: dldo4: disabling
Oct 11 05:16:08 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:16:08 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:16:08 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:16:08 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:16:08 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:16:08 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:16:08 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: MQTT broker localhost:1883
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:16:08 IQ138000 wb-mqtt-adc[3079]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:16:09 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:09 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:16:09 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:16:09 IQ138000 knxd[3137]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:16:09 IQ138000 knxd[3137]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:16:09 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:16:09 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:16:09 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:16:09 IQ138000 wb-mqtt-confed[1950]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-serial[1663]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:16:10 IQ138000 wb-mqtt-db[1955]: INFO: [sqlite] DB initialization is done
Oct 11 05:16:10 IQ138000 wb-gsm[3323]: main: Called from pid 1 (systemd)
Oct 11 05:16:11 IQ138000 wb-gsm[3366]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:16:11 IQ138000 wb-gsm[3442]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:16:11 IQ138000 wb-usb-otg-start.sh[3446]: : wb-usb-otg-start
Oct 11 05:16:11 IQ138000 wb-usb-otg-start.sh[3446]: main: setup_device()
Oct 11 05:16:11 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:16:11 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:16:11 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:16:11 IQ138000 kernel: using random self ethernet address
Oct 11 05:16:11 IQ138000 kernel: using random host ethernet address
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:16:11 IQ138000 wb-usb-otg-start.sh[3446]: main: enabling profile rndis
Oct 11 05:16:11 IQ138000 systemd-udevd[3427]: Using default interface naming scheme 'v247'.
Oct 11 05:16:11 IQ138000 NetworkManager[405]: <info>  [1760159771.9144] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:16:11 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:16:11 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:16:11 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:16:11 IQ138000 wb-gsm[3491]: should_enable: Should enable GSM modem
Oct 11 05:16:11 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 484)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 491)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 498)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 511)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 524)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:16:11 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:16:12 IQ138000 NetworkManager[405]: <info>  [1760159772.0896] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 950)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 957)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 964)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 977)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 990)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1003)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1016)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: DB logger started, go to main loop
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:16:12 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:16:12 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:16:13 IQ138000 wb-mqtt-db[1955]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:16:13 IQ138000 wb-gsm[3580]: main: Called from pid 3500 (wb-gsm-mm)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:16:13 IQ138000 wb-gsm[3591]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:16:13 IQ138000 NetworkManager[405]: <info>  [1760159773.6278] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:16:13 IQ138000 NetworkManager[405]: <info>  [1760159773.6281] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:16:13 IQ138000 wb-gsm[3615]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:16:13 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:16:13 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:16:14 IQ138000 npm[1686]: > zigbee2mqtt@2.1.1 start
Oct 11 05:16:14 IQ138000 npm[1686]: > node index.js
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:16:14 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:16:14 IQ138000 python3[1928]: Выполнение: service wb-connection-manager stop
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:16:14 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:15 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:16 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:16:16 IQ138000 wb-gsm[3998]: mm_off: Modem is already OFF
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:16:17 IQ138000 npm[3685]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:17 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:17 IQ138000 wb-gsm[4069]: main: Called from pid 3500 (wb-gsm-mm)
Oct 11 05:16:17 IQ138000 wb-gsm[4080]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:18 IQ138000 wb-gsm[4103]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:19 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:16:20 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:21 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:16:22 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:16:22 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:22 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:22 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:22 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:22 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:16:22 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:16:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:16:22 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:16:22 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:16:22 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:16:22 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:22 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:16:22 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:16:22 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:16:22 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:16:22 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.143s CPU time.
Oct 11 05:16:22 IQ138000 knxd[4502]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:16:22 IQ138000 knxd[4502]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:16:22 IQ138000 python3[1928]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:16:22 IQ138000 python3[1928]:  
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: MQTT broker localhost:1883
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:16:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:16:22 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:16:22 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: w1 thread Started
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:16:22 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:22 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:23 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <warn>  [1760159784.5287] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <info>  [1760159784.5289] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <info>  [1760159784.5311] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <warn>  [1760159784.5331] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <info>  [1760159784.5347] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:24 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:16:24 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <info>  [1760159784.5795] manager: startup complete
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <info>  [1760159784.5808] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:16:24 IQ138000 NetworkManager[405]: <info>  [1760159784.5810] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:16:24 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:16:24 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:16:24 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:16:24 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:24 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:16:24 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:16:25 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:16:25 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:16:25 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:25 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:25 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:16:25 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:25 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:16:25 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:25 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:26 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:16:27 IQ138000 python3[1928]: Выполнение: mmcli -m wbc
Oct 11 05:16:27 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:27 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:27 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:16:27 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:27 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:16:27 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:16:28 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:16:28 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:16:28 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:16:28 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:16:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:16:28 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:16:28 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:16:28 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:16:28 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:16:28 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:16:28 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:16:28 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:16:28 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:16:28 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:16:28 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:16:28 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:16:28 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:16:28 IQ138000 watchdog[4630]: starting daemon (5.16):
Oct 11 05:16:28 IQ138000 watchdog[4630]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:16:28 IQ138000 watchdog[4630]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:16:28 IQ138000 watchdog[4630]:  ping: no machine to check
Oct 11 05:16:28 IQ138000 watchdog[4630]:  file: no file to check
Oct 11 05:16:28 IQ138000 watchdog[4630]:  pidfile: /var/run/sshd.pid
Oct 11 05:16:28 IQ138000 watchdog[4630]:  interface: no interface to check
Oct 11 05:16:28 IQ138000 watchdog[4630]:  temperature: no sensors to check
Oct 11 05:16:28 IQ138000 watchdog[4630]:  no test binary files
Oct 11 05:16:28 IQ138000 watchdog[4630]:  no repair binary files
Oct 11 05:16:28 IQ138000 watchdog[4630]:  error retry time-out = 30 seconds
Oct 11 05:16:28 IQ138000 watchdog[4630]:  repair attempts = 1
Oct 11 05:16:28 IQ138000 watchdog[4630]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:16:28 IQ138000 watchdog[4630]: watchdog now set to 120 seconds
Oct 11 05:16:28 IQ138000 watchdog[4630]: hardware watchdog identity: WBEC WDT
Oct 11 05:16:28 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:16:28 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:16:28 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:16:28 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:16:28 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:16:28 IQ138000 systemd[1]: Startup finished in 3.794s (kernel) + 50.040s (userspace) = 53.835s.
Oct 11 05:16:28 IQ138000 wb-rules[4611]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:16:28 IQ138000 wb-rules[4611]: INFO: driver is created
Oct 11 05:16:28 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:28 IQ138000 wb-rules[4611]: INFO: [wbgo_mqtt] rules-IQ138000-4611: MQTT connection established
Oct 11 05:16:28 IQ138000 wb-rules[4611]: INFO: driver loop is started
Oct 11 05:16:28 IQ138000 wb-rules[4611]: INFO: wait for driver to become ready
Oct 11 05:16:28 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:28 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:28 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:29 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-rules[4611]: INFO: driver is ready
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-rules[4611]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:16:30 IQ138000 wb-rules[4611]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4611: MQTT connection established
Oct 11 05:16:30 IQ138000 wb-rules[4611]: INFO: [engine] Starting main loop
Oct 11 05:16:30 IQ138000 wb-rules[4611]: INFO: the engine is ready
Oct 11 05:16:30 IQ138000 wb-rules[4611]: INFO: [engine] Starting sync loop
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:30 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:31 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:16:31 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:31 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 7e:f9:5b:24:66:31
Oct 11 05:16:31 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:16:31 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:16:31 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:16:31 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:16:31 IQ138000 NetworkManager[405]: <info>  [1760159791.5503] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:16:31 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:16:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:16:31 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:16:31 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:16:31 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 systemd-udevd[4822]: Using default interface naming scheme 'v247'.
Oct 11 05:16:31 IQ138000 systemd-udevd[4822]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:31 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:31 IQ138000 wb-rules[4611]: WARNING: [rule warning] DAC: no config file
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:32 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:16:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:16:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 knxd[4994]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:16:33 IQ138000 knxd[4994]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:16:33 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:16:33 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:16:33 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:33 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:16:33 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:34 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 05:16:34 IQ138000 wb-gsm[5012]: mm_on: Waiting for modem to start
Oct 11 05:16:34 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:34 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:16:34 IQ138000 python3[1928]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:34 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:35 IQ138000 wb-rules[4611]: INFO: all rule files are loaded
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:16:35 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:16:35 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:16:36 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:36 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 npm[3685]: [2025-10-11 05:16:37] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 npm[3685]: [2025-10-11 05:16:37] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:16:37 IQ138000 npm[3685]: [2025-10-11 05:16:37] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:37 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 npm[3685]: [2025-10-11 05:16:38] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 npm[3685]: [2025-10-11 05:16:38] info:         zh:zstack:znp: Serialport opened
Oct 11 05:16:38 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:38 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:39 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:16:39 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:16:39 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:16:39 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:41 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: Currently 4 devices are joined.
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:16:41 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:16:41 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m: Connected to MQTT server
Oct 11 05:16:41 IQ138000 npm[3685]: [2025-10-11 05:16:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:16:42 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:16:42.146+00:00
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:16:42.146Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159982166,"cmd_timestamp_ms":1760159802166,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159982166,"cmd_timestamp_ms":1760159802166,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:16:42 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:16:42 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:16:42 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:16:42 IQ138000 npm[3685]: [2025-10-11 05:16:42] info:         z2m: Started frontend on port 8282
Oct 11 05:16:42 IQ138000 npm[3685]: [2025-10-11 05:16:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:16:42.426+00:00
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:16:42.426Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:42 IQ138000 npm[3685]: [2025-10-11 05:16:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159982443,"cmd_timestamp_ms":1760159802443,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760159982443,"cmd_timestamp_ms":1760159802443,"source":"schedule"}
Oct 11 05:16:42 IQ138000 npm[3685]: [2025-10-11 05:16:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:16:42 IQ138000 npm[3685]: [2025-10-11 05:16:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:16:42 IQ138000 npm[3685]: [2025-10-11 05:16:42] info:         z2m: Zigbee2MQTT started!
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:16:42.736+00:00
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:16:42.736Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159982751,"cmd_timestamp_ms":1760159802751,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159982751,"cmd_timestamp_ms":1760159802751,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:16:42.763+00:00
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:16:42.763Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159982777,"cmd_timestamp_ms":1760159802777,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159982777,"cmd_timestamp_ms":1760159802777,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:16:42.901+00:00
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:16:42.901Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159982913,"cmd_timestamp_ms":1760159802913,"source":"schedule"}
Oct 11 05:16:42 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159982913,"cmd_timestamp_ms":1760159802913,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:16:43.078+00:00
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:16:43.078Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159983097,"cmd_timestamp_ms":1760159803097,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159983097,"cmd_timestamp_ms":1760159803097,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:16:43 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:43 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:16:43 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:16:43 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:16:43.240+00:00
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:16:43.240Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:16:43 IQ138000 knxd[5165]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:16:43 IQ138000 knxd[5165]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:16:43 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159983252,"cmd_timestamp_ms":1760159803252,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159983252,"cmd_timestamp_ms":1760159803252,"source":"schedule"}
Oct 11 05:16:43 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:16:43 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:16:43.424+00:00
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:16:43.424Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159983440,"cmd_timestamp_ms":1760159803440,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760159983440,"cmd_timestamp_ms":1760159803440,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:16:43 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:16:43.840+00:00
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:16:43.840Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159983852,"cmd_timestamp_ms":1760159803852,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159983852,"cmd_timestamp_ms":1760159803852,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:16:43.983+00:00
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:16:43.983Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159983995,"cmd_timestamp_ms":1760159803995,"source":"schedule"}
Oct 11 05:16:43 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159983995,"cmd_timestamp_ms":1760159803995,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:16:44.162+00:00
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:16:44.162Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159984189,"cmd_timestamp_ms":1760159804189,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760159984189,"cmd_timestamp_ms":1760159804189,"source":"schedule"}
Oct 11 05:16:44 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:16:44.403+00:00
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:16:44.403Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760159984415,"cmd_timestamp_ms":1760159804415,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760159984415,"cmd_timestamp_ms":1760159804415,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:16:44 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:16:44 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:16:44 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:16:44.605+00:00
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:16:44.605Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760159984613,"cmd_timestamp_ms":1760159804613,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760159984613,"cmd_timestamp_ms":1760159804613,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:16:44.789+00:00
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:16:44.789Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159984800,"cmd_timestamp_ms":1760159804800,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159984800,"cmd_timestamp_ms":1760159804800,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:16:44.957+00:00
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:16:44.957Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159984965,"cmd_timestamp_ms":1760159804965,"source":"schedule"}
Oct 11 05:16:44 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760159984965,"cmd_timestamp_ms":1760159804965,"source":"schedule"}
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:16:45 IQ138000 wb-watchdog[5241]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:16:45 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:45 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:16:45 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:45 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:16:45 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:16:45 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:16:45 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:16:45 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:46 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:16:46 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:16:46 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:46 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:16:47 IQ138000 wb-mqtt-serial[1663]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:16:48 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:49 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:16:49 IQ138000 wb-mqtt-serial[1663]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:16:49 IQ138000 wb-mqtt-serial[1663]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:16:49 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:50 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:50 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:50 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:51 IQ138000 ModemManager[479]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:16:51 IQ138000 ModemManager[479]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:16:51 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:51 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:52 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:16:52 IQ138000 ModemManager[479]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:16:52 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 16 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:52 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:16:52 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:52 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:52 IQ138000 python3[1928]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:16:52 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:16:53 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:16:53 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:53 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:53 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:16:53 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:16:53 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:16:53 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:16:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:16:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:16:53 IQ138000 knxd[5380]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:16:53 IQ138000 knxd[5380]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:16:53 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:16:53 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:16:53 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:16:53 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:53 IQ138000 ModemManager[479]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:16:53 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7437] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7478] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7499] device (ttyUSB1): modem state 'enabling'
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7538] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7573] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7633] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7640] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:53 IQ138000 NetworkManager[405]: <info>  [1760159813.7673] manager: NetworkManager state is now CONNECTING
Oct 11 05:16:53 IQ138000 ModemManager[479]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:16:53 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:16:53 IQ138000 ModemManager[479]: <info>  [modem0] power state updated: on
Oct 11 05:16:53 IQ138000 python3[1928]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:16:53 IQ138000 python3[1928]:    --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:16:53 IQ138000 python3[1928]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:16:53 IQ138000 python3[1928]:            |                model: A7602E-H
Oct 11 05:16:53 IQ138000 python3[1928]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:16:53 IQ138000 python3[1928]:            |            supported: gsm-umts
Oct 11 05:16:53 IQ138000 python3[1928]:            |              current: gsm-umts
Oct 11 05:16:53 IQ138000 python3[1928]:            |         equipment id: 860803062234204
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   System   |               device: wbc
Oct 11 05:16:53 IQ138000 python3[1928]:            |              drivers: option, rndis_host
Oct 11 05:16:53 IQ138000 python3[1928]:            |               plugin: simtech
Oct 11 05:16:53 IQ138000 python3[1928]:            |         primary port: ttyUSB1
Oct 11 05:16:53 IQ138000 python3[1928]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:16:53 IQ138000 python3[1928]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:16:53 IQ138000 python3[1928]:            |                state: enabling
Oct 11 05:16:53 IQ138000 python3[1928]:            |          power state: on
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:16:53 IQ138000 python3[1928]:            |              current: allowed: any; preferred: none
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   3GPP     |                 imei: 860803062234204
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:16:53 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:16:53 IQ138000 python3[1928]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:16:53 IQ138000 python3[1928]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:16:53 IQ138000 python3[1928]:            |                       slot 2: none
Oct 11 05:16:53 IQ138000 python3[1928]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:16:54 IQ138000 python3[1928]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:16:54 IQ138000 python3[1928]:  successfully requested primary SIM switch in modem
Oct 11 05:16:57 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:16:57 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:16:57 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:16:57 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:16:57 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:16:57 IQ138000 lsyncd[5423]: 05:16:57 Normal: --- Startup ---
Oct 11 05:16:57 IQ138000 lsyncd[5423]: 05:16:57 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:16:57 IQ138000 lsyncd[5423]: iq_network_manager/iq_network_manager.log
Oct 11 05:16:57 IQ138000 lsyncd[5423]: messages
Oct 11 05:16:57 IQ138000 lsyncd[5423]: journal
Oct 11 05:16:57 IQ138000 lsyncd[5426]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:16:57 IQ138000 lsyncd[5425]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:16:57 IQ138000 lsyncd[5425]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:16:57 IQ138000 lsyncd[5423]: 05:16:57 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:16:57 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:16:57 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] simple connect started...
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:16:58 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:16:58 IQ138000 NetworkManager[405]: <info>  [1760159818.5153] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:58 IQ138000 NetworkManager[405]: <info>  [1760159818.5167] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:16:58 IQ138000 NetworkManager[405]: <info>  [1760159818.5198] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:16:58 IQ138000 NetworkManager[405]: <info>  [1760159818.5222] ppp-manager: starting PPP connection
Oct 11 05:16:58 IQ138000 NetworkManager[405]: <info>  [1760159818.5353] ppp-manager: pppd started with pid 5435
Oct 11 05:16:58 IQ138000 pppd[5435]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:16:58 IQ138000 NetworkManager[5435]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: initializing
Oct 11 05:16:58 IQ138000 pppd[5435]: pppd 2.4.9 started by root, uid 0
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:16:58 IQ138000 pppd[5435]: Using interface ppp0
Oct 11 05:16:58 IQ138000 NetworkManager[5435]: Using interface ppp0
Oct 11 05:16:58 IQ138000 pppd[5435]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:16:58 IQ138000 NetworkManager[5435]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:16:58 IQ138000 NetworkManager[405]: <info>  [1760159818.6197] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:16:58 IQ138000 pppd[5435]: PAP authentication succeeded
Oct 11 05:16:58 IQ138000 NetworkManager[5435]: PAP authentication succeeded
Oct 11 05:16:58 IQ138000 pppd[5435]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:16:58 IQ138000 pppd[5435]: kernel does not support PPP filtering
Oct 11 05:16:58 IQ138000 NetworkManager[5435]: kernel does not support PPP filtering
Oct 11 05:16:58 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:16:58 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:16:58 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:58 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:16:59 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:16:59 IQ138000 ModemManager[479]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:16:59 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:16:59 IQ138000 pppd[5435]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:16:59 IQ138000 NetworkManager[5435]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:16:59 IQ138000 pppd[5435]: local  IP address 10.132.148.102
Oct 11 05:16:59 IQ138000 NetworkManager[5435]: local  IP address 10.132.148.102
Oct 11 05:16:59 IQ138000 NetworkManager[5435]: remote IP address 10.64.64.64
Oct 11 05:16:59 IQ138000 NetworkManager[5435]: primary   DNS address 172.23.10.131
Oct 11 05:16:59 IQ138000 NetworkManager[5435]: secondary DNS address 172.23.10.130
Oct 11 05:16:59 IQ138000 pppd[5435]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:16:59 IQ138000 pppd[5435]: remote IP address 10.64.64.64
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.3591] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:16:59 IQ138000 pppd[5435]: primary   DNS address 172.23.10.131
Oct 11 05:16:59 IQ138000 pppd[5435]: secondary DNS address 172.23.10.130
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.3632] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:16:59 IQ138000 pppd[5435]: nm-ppp-plugin: ip-up event
Oct 11 05:16:59 IQ138000 pppd[5435]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.3784] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.3814] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.3858] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:16:59 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:16:59 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.4530] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:59 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:16:59 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:16:59 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:16:59 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:16:59 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.5456] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.5471] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.5493] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.5530] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:16:59 IQ138000 NetworkManager[405]: <info>  [1760159819.5608] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:16:59 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:16:59 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:17:00 IQ138000 vnstatd[1652]: Info: Interface "ppp0" enabled.
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:17:00 IQ138000 ntpd[1644]: Listen normally on 4 ppp0 10.132.148.102:123
Oct 11 05:17:00 IQ138000 ntpd[1644]: new interface(s) found: waking up resolver
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:00 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:01 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:01 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:17:01 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:01 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:17:01 IQ138000 CRON[5520]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 05:17:01 IQ138000 CRON[5524]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 05:17:01 IQ138000 CRON[5520]: pam_unix(cron:session): session closed for user root
Oct 11 05:17:01 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:17:02 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:17:02 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:17:02 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:17:02 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:17:02 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:17:02 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:03 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:17:03 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:17:03 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:17:03 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:03 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:17:03 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:17:03 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:17:03 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:17:03 IQ138000 wb-mqtt-knx[1974]: INFO: knxd connected successfully
Oct 11 05:17:04 IQ138000 python3[1928]: Выполнение: mmcli -i any
Oct 11 05:17:04 IQ138000 python3[1928]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:17:04 IQ138000 python3[1928]:    -------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:04 IQ138000 python3[1928]:   -------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Properties |            active: yes
Oct 11 05:17:04 IQ138000 python3[1928]:              |              imsi: 250997340491874
Oct 11 05:17:04 IQ138000 python3[1928]:              |             iccid: 8970199210429593744
Oct 11 05:17:04 IQ138000 python3[1928]:              |       operator id: 25099
Oct 11 05:17:04 IQ138000 python3[1928]:              |     operator name: Beeline
Oct 11 05:17:04 IQ138000 python3[1928]: Выполнение: mmcli -m wbc
Oct 11 05:17:04 IQ138000 python3[1928]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:17:04 IQ138000 python3[1928]:    --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:17:04 IQ138000 python3[1928]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:17:04 IQ138000 python3[1928]:            |                model: A7602E-H
Oct 11 05:17:04 IQ138000 python3[1928]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:17:04 IQ138000 python3[1928]:            |            supported: gsm-umts
Oct 11 05:17:04 IQ138000 python3[1928]:            |              current: gsm-umts
Oct 11 05:17:04 IQ138000 python3[1928]:            |         equipment id: 860803062234204
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   System   |               device: wbc
Oct 11 05:17:04 IQ138000 python3[1928]:            |              drivers: option, rndis_host
Oct 11 05:17:04 IQ138000 python3[1928]:            |               plugin: simtech
Oct 11 05:17:04 IQ138000 python3[1928]:            |         primary port: ttyUSB1
Oct 11 05:17:04 IQ138000 python3[1928]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:17:04 IQ138000 python3[1928]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:17:04 IQ138000 python3[1928]:            |                state: connected
Oct 11 05:17:04 IQ138000 python3[1928]:            |          power state: on
Oct 11 05:17:04 IQ138000 python3[1928]:            |          access tech: lte
Oct 11 05:17:04 IQ138000 python3[1928]:            |       signal quality: 90% (recent)
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:17:04 IQ138000 python3[1928]:            |              current: allowed: any; preferred: none
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   3GPP     |                 imei: 860803062234204
Oct 11 05:17:04 IQ138000 python3[1928]:            |          operator id: 25099
Oct 11 05:17:04 IQ138000 python3[1928]:            |        operator name: beeline
Oct 11 05:17:04 IQ138000 python3[1928]:            |         registration: home
Oct 11 05:17:04 IQ138000 python3[1928]:            | packet service state: attached
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:04 IQ138000 python3[1928]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:17:04 IQ138000 python3[1928]:            |                       slot 2: none
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:17:04 IQ138000 python3[1928]: Current state: home
Oct 11 05:17:04 IQ138000 python3[1928]: SIM registered in the network.
Oct 11 05:17:04 IQ138000 python3[1928]: Выполнение: mmcli -m wbc
Oct 11 05:17:04 IQ138000 python3[1928]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:17:04 IQ138000 python3[1928]:    --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:17:04 IQ138000 python3[1928]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:17:04 IQ138000 python3[1928]:            |                model: A7602E-H
Oct 11 05:17:04 IQ138000 python3[1928]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:17:04 IQ138000 python3[1928]:            |            supported: gsm-umts
Oct 11 05:17:04 IQ138000 python3[1928]:            |              current: gsm-umts
Oct 11 05:17:04 IQ138000 python3[1928]:            |         equipment id: 860803062234204
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   System   |               device: wbc
Oct 11 05:17:04 IQ138000 python3[1928]:            |              drivers: option, rndis_host
Oct 11 05:17:04 IQ138000 python3[1928]:            |               plugin: simtech
Oct 11 05:17:04 IQ138000 python3[1928]:            |         primary port: ttyUSB1
Oct 11 05:17:04 IQ138000 python3[1928]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:17:04 IQ138000 python3[1928]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:17:04 IQ138000 python3[1928]:            |                state: connected
Oct 11 05:17:04 IQ138000 python3[1928]:            |          power state: on
Oct 11 05:17:04 IQ138000 python3[1928]:            |          access tech: lte
Oct 11 05:17:04 IQ138000 python3[1928]:            |       signal quality: 90% (recent)
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:17:04 IQ138000 python3[1928]:            |              current: allowed: any; preferred: none
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   3GPP     |                 imei: 860803062234204
Oct 11 05:17:04 IQ138000 python3[1928]:            |          operator id: 25099
Oct 11 05:17:04 IQ138000 python3[1928]:            |        operator name: beeline
Oct 11 05:17:04 IQ138000 python3[1928]:            |         registration: home
Oct 11 05:17:04 IQ138000 python3[1928]:            | packet service state: attached
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:04 IQ138000 python3[1928]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:17:04 IQ138000 python3[1928]:            |                       slot 2: none
Oct 11 05:17:04 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:17:04 IQ138000 python3[1928]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:04 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 31 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:04 IQ138000 python3[1928]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:17:04 IQ138000 python3[1928]:    -------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:04 IQ138000 python3[1928]:   -------------------------------
Oct 11 05:17:04 IQ138000 python3[1928]:   Properties |            active: yes
Oct 11 05:17:04 IQ138000 python3[1928]:              |              imsi: 250997340491874
Oct 11 05:17:04 IQ138000 python3[1928]:              |             iccid: 8970199210429593744
Oct 11 05:17:04 IQ138000 python3[1928]:              |       operator id: 25099
Oct 11 05:17:04 IQ138000 python3[1928]:              |     operator name: Beeline
Oct 11 05:17:05 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:17:06 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:07 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:17:07 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:07 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 4 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:09 IQ138000 python3[1928]: Выполнение: mmcli -m wbc
Oct 11 05:17:09 IQ138000 python3[1928]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:17:09 IQ138000 python3[1928]:    --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:17:09 IQ138000 python3[1928]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:17:09 IQ138000 python3[1928]:            |                model: A7602E-H
Oct 11 05:17:09 IQ138000 python3[1928]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:17:09 IQ138000 python3[1928]:            |            supported: gsm-umts
Oct 11 05:17:09 IQ138000 python3[1928]:            |              current: gsm-umts
Oct 11 05:17:09 IQ138000 python3[1928]:            |         equipment id: 860803062234204
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   System   |               device: wbc
Oct 11 05:17:09 IQ138000 python3[1928]:            |              drivers: option, rndis_host
Oct 11 05:17:09 IQ138000 python3[1928]:            |               plugin: simtech
Oct 11 05:17:09 IQ138000 python3[1928]:            |         primary port: ttyUSB1
Oct 11 05:17:09 IQ138000 python3[1928]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:17:09 IQ138000 python3[1928]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:17:09 IQ138000 python3[1928]:            |                state: connected
Oct 11 05:17:09 IQ138000 python3[1928]:            |          power state: on
Oct 11 05:17:09 IQ138000 python3[1928]:            |          access tech: lte
Oct 11 05:17:09 IQ138000 python3[1928]:            |       signal quality: 90% (recent)
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:17:09 IQ138000 python3[1928]:            |              current: allowed: any; preferred: none
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   3GPP     |                 imei: 860803062234204
Oct 11 05:17:09 IQ138000 python3[1928]:            |          operator id: 25099
Oct 11 05:17:09 IQ138000 python3[1928]:            |        operator name: beeline
Oct 11 05:17:09 IQ138000 python3[1928]:            |         registration: home
Oct 11 05:17:09 IQ138000 python3[1928]:            | packet service state: attached
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:09 IQ138000 python3[1928]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:17:09 IQ138000 python3[1928]:            |                       slot 2: none
Oct 11 05:17:09 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:17:09 IQ138000 python3[1928]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:09 IQ138000 python3[1928]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:17:09 IQ138000 python3[1928]:    -------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:09 IQ138000 python3[1928]:   -------------------------------
Oct 11 05:17:09 IQ138000 python3[1928]:   Properties |            active: yes
Oct 11 05:17:09 IQ138000 python3[1928]:              |              imsi: 250997340491874
Oct 11 05:17:09 IQ138000 python3[1928]:              |             iccid: 8970199210429593744
Oct 11 05:17:09 IQ138000 python3[1928]:              |       operator id: 25099
Oct 11 05:17:09 IQ138000 python3[1928]:              |     operator name: Beeline
Oct 11 05:17:09 IQ138000 ntpd[1644]: Soliciting pool server 31.135.66.5
Oct 11 05:17:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:17:10 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:17:10 IQ138000 ntpd[1644]: Soliciting pool server 78.36.199.163
Oct 11 05:17:10 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:11 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:11 IQ138000 ntpd[1644]: Soliciting pool server 92.255.126.17
Oct 11 05:17:12 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:12 IQ138000 ntpd[1644]: Soliciting pool server 178.186.166.30
Oct 11 05:17:13 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:17:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:17:14 IQ138000 python3[1928]: Выполнение: mmcli -m wbc
Oct 11 05:17:14 IQ138000 python3[1928]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:17:14 IQ138000 python3[1928]:    --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:17:14 IQ138000 python3[1928]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:17:14 IQ138000 python3[1928]:            |                model: A7602E-H
Oct 11 05:17:14 IQ138000 python3[1928]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:17:14 IQ138000 python3[1928]:            |            supported: gsm-umts
Oct 11 05:17:14 IQ138000 python3[1928]:            |              current: gsm-umts
Oct 11 05:17:14 IQ138000 python3[1928]:            |         equipment id: 860803062234204
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   System   |               device: wbc
Oct 11 05:17:14 IQ138000 python3[1928]:            |              drivers: option, rndis_host
Oct 11 05:17:14 IQ138000 python3[1928]:            |               plugin: simtech
Oct 11 05:17:14 IQ138000 python3[1928]:            |         primary port: ttyUSB1
Oct 11 05:17:14 IQ138000 python3[1928]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:17:14 IQ138000 python3[1928]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:17:14 IQ138000 python3[1928]:            |                state: connected
Oct 11 05:17:14 IQ138000 python3[1928]:            |          power state: on
Oct 11 05:17:14 IQ138000 python3[1928]:            |          access tech: lte
Oct 11 05:17:14 IQ138000 python3[1928]:            |       signal quality: 90% (recent)
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:17:14 IQ138000 python3[1928]:            |              current: allowed: any; preferred: none
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   3GPP     |                 imei: 860803062234204
Oct 11 05:17:14 IQ138000 python3[1928]:            |          operator id: 25099
Oct 11 05:17:14 IQ138000 python3[1928]:            |        operator name: beeline
Oct 11 05:17:14 IQ138000 python3[1928]:            |         registration: home
Oct 11 05:17:14 IQ138000 python3[1928]:            | packet service state: attached
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:14 IQ138000 python3[1928]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:17:14 IQ138000 python3[1928]:            |                       slot 2: none
Oct 11 05:17:14 IQ138000 python3[1928]:   --------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:17:14 IQ138000 python3[1928]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:14 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:14 IQ138000 python3[1928]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:17:14 IQ138000 python3[1928]:    -------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:17:14 IQ138000 python3[1928]:   -------------------------------
Oct 11 05:17:14 IQ138000 python3[1928]:   Properties |            active: yes
Oct 11 05:17:14 IQ138000 python3[1928]:              |              imsi: 250997340491874
Oct 11 05:17:14 IQ138000 python3[1928]:              |             iccid: 8970199210429593744
Oct 11 05:17:14 IQ138000 python3[1928]:              |       operator id: 25099
Oct 11 05:17:14 IQ138000 python3[1928]:              |     operator name: Beeline
Oct 11 05:17:14 IQ138000 ntpd[1644]: Soliciting pool server 51.250.35.68
Oct 11 05:17:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:15 IQ138000 ntpd[1644]: Soliciting pool server 82.148.19.217
Oct 11 05:17:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:15 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 05:17:16 IQ138000 ntpd[1644]: Soliciting pool server 92.241.12.152
Oct 11 05:17:17 IQ138000 ntpd[1644]: Soliciting pool server 178.46.155.62
Oct 11 05:17:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:17:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:17:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:17:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:17:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:17:18 IQ138000 wb-mqtt-serial[1663]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
-- Boot 2282d54e9b2548ac919f140bc01c56b7 --
Oct 11 05:21:42 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:21:42 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:21:42 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:21:42 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:21:42 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:21:42 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:21:42 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:21:42 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:21:42 IQ138000 kernel: Zone ranges:
Oct 11 05:21:42 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:21:42 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:21:42 IQ138000 kernel: Movable zone start for each node
Oct 11 05:21:42 IQ138000 kernel: Early memory node ranges
Oct 11 05:21:42 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:21:42 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:21:42 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:21:42 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:21:42 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:21:42 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:21:42 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:21:42 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:21:42 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:21:42 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:21:42 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:21:42 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:21:42 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:21:42 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:21:42 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:21:42 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:21:42 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:21:42 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:21:42 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:21:42 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:21:42 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:21:42 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:21:42 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:21:42 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:21:42 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:21:42 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:21:42 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:21:42 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:21:42 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:21:42 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:21:42 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:21:42 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:21:42 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:21:42 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:21:42 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:21:42 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:21:42 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:21:42 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:21:42 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:21:42 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:21:42 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:21:42 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:21:42 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:21:42 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:21:42 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:21:42 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:21:42 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:21:42 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:21:42 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:21:42 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:21:42 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:21:42 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:21:42 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:21:42 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:21:42 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:21:42 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:21:42 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:21:42 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:21:42 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:21:42 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:21:42 IQ138000 kernel: No ATAGs?
Oct 11 05:21:42 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:21:42 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:21:42 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:21:42 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:21:42 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:21:42 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:21:42 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:21:42 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:21:42 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:21:42 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:21:42 IQ138000 kernel: PTP clock support registered
Oct 11 05:21:42 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:21:42 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:21:42 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:21:42 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:21:42 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:21:42 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:21:42 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:21:42 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:21:42 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:21:42 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:21:42 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:21:42 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:21:42 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:21:42 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:21:42 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:21:42 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:21:42 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:21:42 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:21:42 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:21:42 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:21:42 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:21:42 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:21:42 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:21:42 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:21:42 IQ138000 kernel: brd: module loaded
Oct 11 05:21:42 IQ138000 kernel: loop: module loaded
Oct 11 05:21:42 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:21:42 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:21:42 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:21:42 IQ138000 kernel: CAN device driver interface
Oct 11 05:21:42 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:21:42 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:21:42 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:21:42 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:21:42 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:21:42 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:21:42 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:21:42 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:21:42 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:21:42 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:21:42 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:21:42 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:21:42 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:21:42 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:21:42 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:21:42 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:21:42 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:21:42 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:21:42 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:21:42 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:21:42 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:21:42 IQ138000 kernel: can: controller area network core
Oct 11 05:21:42 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:21:42 IQ138000 kernel: can: raw protocol
Oct 11 05:21:42 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:21:42 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:21:42 IQ138000 kernel: can: SAE J1939
Oct 11 05:21:42 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:21:42 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:21:42 IQ138000 kernel: registered taskstats version 1
Oct 11 05:21:42 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:21:42 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:21:42 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:21:42 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:21:42 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:21:42 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:21:42 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:21:42 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:21:42 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:21:38 UTC (1760160098)
Oct 11 05:21:42 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:21:42 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:21:42 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:21:42 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:21:42 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:21:42 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:21:42 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:21:42 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:21:42 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:21:42 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:21:42 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:21:42 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:21:42 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:21:42 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:21:42 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: random: fast init done
Oct 11 05:21:42 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:21:42 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:21:42 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:21:42 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:21:42 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:21:42 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:21:42 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:21:42 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:21:42 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:21:42 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:21:42 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:21:42 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:21:42 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:21:42 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:21:42 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:21:42 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:21:42 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:21:42 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:21:42 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:21:42 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:21:42 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:21:42 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:21:42 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:21:42 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:21:42 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:21:42 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:21:42 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:21:42 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:21:42 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:21:42 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:21:42 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:21:42 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:21:42 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:21:42 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:21:42 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:21:42 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:21:42 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:21:42 IQ138000 kernel: of_cfs_init
Oct 11 05:21:42 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:21:42 IQ138000 kernel: ALSA device list:
Oct 11 05:21:42 IQ138000 kernel:   No soundcards found.
Oct 11 05:21:42 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:21:42 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:21:42 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:21:42 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:21:42 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:21:42 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:21:42 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:21:42 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:21:42 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:21:42 IQ138000 kernel:   with arguments:
Oct 11 05:21:42 IQ138000 kernel:     /sbin/init
Oct 11 05:21:42 IQ138000 kernel:   with environment:
Oct 11 05:21:42 IQ138000 kernel:     HOME=/
Oct 11 05:21:42 IQ138000 kernel:     TERM=linux
Oct 11 05:21:42 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:21:42 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:21:42 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:21:42 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:21:42 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:21:42 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:21:42 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:21:42 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:21:42 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:21:42 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:21:42 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:21:42 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:21:42 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:21:42 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:21:42 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:21:42 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:21:42 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:21:42 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:21:42 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:21:42 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:21:42 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:21:42 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:21:42 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:21:42 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:21:42 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:21:42 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:21:42 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:21:42 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:21:42 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:21:42 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:21:42 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:21:42 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:21:42 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:21:42 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:21:42 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:21:42 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:21:42 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:21:42 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:21:42 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:21:42 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:21:42 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:21:42 IQ138000 systemd-journald[140]: Journal started
Oct 11 05:21:42 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:21:42 IQ138000 systemd-fsck[143]: rootfs1: clean, 37044/131072 files, 278743/524288 blocks
Oct 11 05:21:42 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:21:42 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:21:42 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:21:42 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:21:42 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:21:42 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:21:42 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:21:43 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:21:43 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:21:43 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:21:43 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:21:43 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:21:43 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:21:43 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:21:43 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:21:43 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:21:43 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:21:43 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:21:43 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:21:43 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:21:43 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:21:43 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:21:43 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:21:43 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:21:43 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 05:21:44 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:21:44 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:21:44 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:21:44 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:21:44 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:21:44 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:21:44 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:21:44 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:21:44 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 05:21:44 IQ138000 systemd-udevd[164]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:21:44 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:21:44 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:21:44 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:21:44 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:21:44 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:21:44 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:21:44 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:21:44 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:21:44 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:21:44 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:21:45 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:21:45 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:21:45 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:21:45 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:21:45 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:21:45 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:21:45 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:21:45 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 05:21:45 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:21:45 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 05:21:45 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:21:45 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:21:45 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:21:45 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:21:45 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:21:45 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:21:45 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:21:45 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:21:45 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:21:45 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:21:45 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:21:45 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:21:45 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:21:45 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:21:45 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:21:45 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:21:45 IQ138000 systemd-fsck[215]: data: recovering journal
Oct 11 05:21:45 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:21:45 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:21:45 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:21:45 IQ138000 systemd-fsck[215]: data: clean, 16452/328656 files, 363633/1313536 blocks
Oct 11 05:21:45 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:21:45 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:21:45 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:21:45 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:21:45 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:21:45 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:21:45 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:21:46 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:21:46 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:21:46 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.454ms for 462 entries.
Oct 11 05:21:46 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 466.3M, max 496.6M, 30.2M free.
Oct 11 05:21:46 IQ138000 kernel: random: crng init done
Oct 11 05:21:46 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:21:46 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:21:46 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 05:21:46 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:21:46 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:21:46 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:21:46 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:21:46 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:21:46 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:21:46 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:21:47 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:21:47 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:21:47 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:21:47 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:21:47 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:21:47 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:21:47 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:21:47 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:21:47 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:21:47 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:21:47 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:21:47 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:21:47 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:21:47 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:21:47 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:21:47 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:21:47 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:21:47 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:21:47 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:21:47 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:21:47 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:21:47 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:21:47 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:21:47 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:21:47 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 05:21:47 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:21:47 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:21:47 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 05:21:47 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:21:47 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:21:47 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:21:47 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:21:47 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:21:47 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 05:21:47 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:21:47 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:21:47 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 05:21:47 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:21:47 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:21:47 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:21:48 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:21:48 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:21:48 IQ138000 migrate.sh[320]: Error: No such file or directory
Oct 11 05:21:48 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:21:48 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:21:48 IQ138000 migrate.sh[333]: Error: No such file or directory
Oct 11 05:21:48 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:21:48 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:21:48 IQ138000 migrate.sh[344]: Error: No such file or directory
Oct 11 05:21:48 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:21:48 IQ138000 reverse-ssh.sh[346]: Error: No such file or directory
Oct 11 05:21:48 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:21:48 IQ138000 polkitd[334]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:21:48 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:21:48 IQ138000 migrate.sh[358]: Error: No such file or directory
Oct 11 05:21:48 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:21:48 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:21:48 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:21:48 IQ138000 migrate.sh[369]: Error: No such file or directory
Oct 11 05:21:48 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:21:48 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Successfully dropped root privileges.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: avahi-daemon 0.8 starting up.
Oct 11 05:21:48 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:21:48 IQ138000 rules-preprocessor[340]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:21:48 IQ138000 rules-preprocessor[340]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Successfully called chroot().
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Successfully dropped remaining capabilities.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: No service file found in /etc/avahi/services.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:21:48 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Network interface enumeration completed.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Registering new address record for ::1 on lo.*.
Oct 11 05:21:48 IQ138000 avahi-daemon[370]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:21:48 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 05:21:48 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:21:48 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:21:48 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:21:48 IQ138000 systemd-logind[345]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:21:48 IQ138000 systemd-logind[345]: New seat seat0.
Oct 11 05:21:48 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:21:48 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:21:48 IQ138000 wpa_supplicant[381]: Successfully initialized wpa_supplicant
Oct 11 05:21:48 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:21:48 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:21:48 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:21:48 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:21:48 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:21:48 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:21:48 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:21:48 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:21:48 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:21:48 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:21:48 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:21:48 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:21:48 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:21:49 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:21:49 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:21:49 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:21:49 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:21:49 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:21:49 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:21:49 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:21:49 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:21:49 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.2362] NetworkManager (version 1.42.4) is starting... (boot:2282d54e-9b25-48ac-919f-140bc01c56b7)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.2367] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.2533] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:21:49 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:21:49 IQ138000 monit[326]: Starting daemon monitor: monit.
Oct 11 05:21:49 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.3091] manager[0x686900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:21:49 IQ138000 avahi-daemon[370]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1881173632.
Oct 11 05:21:49 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:21:49 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:21:49 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:21:49 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:21:49 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:21:49 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:21:49 IQ138000 ModemManager[470]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:21:49 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:21:49 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.8858] hostname: hostname: using hostnamed
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.8861] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.8911] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.8994] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9013] manager[0x686900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9016] manager[0x686900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9324] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9471] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9503] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9751] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9793] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9815] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9820] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9824] manager: Networking is enabled by state file
Oct 11 05:21:49 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9904] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9907] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9909] ifupdown: management mode: unmanaged
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9911] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:21:49 IQ138000 NetworkManager[404]: <info>  [1760160109.9913] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:21:50 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:21:50 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.0935] dhcp: init: Using DHCP client 'internal'
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.0958] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.1147] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:21:50 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:21:50 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.1235] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.1370] device (lo): Activation: starting connection 'lo' (9144f951-bb83-41e1-89e4-cf176513bd2f)
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.1480] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.1506] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.5013] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.5099] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.5135] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.5204] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:21:50 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:21:50 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:21:50 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:21:50 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:21:50 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:21:50 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.7242] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.7305] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.7376] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:21:50 IQ138000 NetworkManager[404]: <info>  [1760160110.7417] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.5583] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.5647] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.5685] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.6157] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.6210] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.6416] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.6842] modem-manager: ModemManager available
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.6859] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.7006] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.7031] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.7116] device (lo): Activation: successful, device activated.
Oct 11 05:21:51 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9543] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9553] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9608] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9694] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9866] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9872] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9892] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:21:51 IQ138000 NetworkManager[404]: <info>  [1760160111.9923] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:21:52 IQ138000 NetworkManager[404]: <info>  [1760160112.0055] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:21:52 IQ138000 NetworkManager[404]: <info>  [1760160112.0145] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:21:52 IQ138000 NetworkManager[404]: <info>  [1760160112.0247] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:21:52 IQ138000 NetworkManager[404]: <info>  [1760160112.0366] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:21:52 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:21:52 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:21:52 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:21:55 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:21:55 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:21:55 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 05:21:55 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:55 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:21:55 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:21:56 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:21:56 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 05:21:56 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:56 IQ138000 init.sh[1320]: ...
Oct 11 05:21:56 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 05:21:56 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:56 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:21:56 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:21:56 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:21:56 IQ138000 init.sh[1430]: In file included from -:24:
Oct 11 05:21:56 IQ138000 init.sh[1430]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:57 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:21:57 IQ138000 init.sh[1320]: ...
Oct 11 05:21:57 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 05:21:57 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:57 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:21:57 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:21:57 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:21:57 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 05:21:57 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:57 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:21:57 IQ138000 init.sh[1491]: In file included from -:11:
Oct 11 05:21:57 IQ138000 init.sh[1491]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:21:58 IQ138000 init.sh[1320]: ...
Oct 11 05:21:58 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:21:58 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:21:58 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:21:58 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:21:58 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:21:58 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:21:58 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:21:58 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:21:58 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:21:58 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:21:58 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:21:58 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:21:58 IQ138000 lsyncd[1611]: 05:21:58 Normal: --- Startup ---
Oct 11 05:21:58 IQ138000 knxd[1606]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:21:58 IQ138000 knxd[1606]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:21:58 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:21:58 IQ138000 lsyncd[1611]: 05:21:58 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:21:58 IQ138000 lsyncd[1611]: messages
Oct 11 05:21:58 IQ138000 lsyncd[1611]: iq_network_manager/iq_network_manager.log
Oct 11 05:21:58 IQ138000 lsyncd[1611]: journal
Oct 11 05:21:58 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:21:58 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:21:58 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:21:58 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:21:58 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:21:58 IQ138000 ntpd[1620]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:21:58 IQ138000 ntpd[1620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:21:58 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:21:58 IQ138000 ntpd[1620]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:21:59 IQ138000 ntpd[1620]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:21:59 IQ138000 lsyncd[1636]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:21:59 IQ138000 lsyncd[1623]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:21:59 IQ138000 lsyncd[1623]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 05:21:59 IQ138000 lsyncd[1611]: 05:21:59 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:21:59 IQ138000 ntpd[1620]: corporation.  Support and training for ntp-4 are
Oct 11 05:21:59 IQ138000 ntpd[1620]: available at https://www.nwtime.org/support
Oct 11 05:21:59 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:21:59 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:21:59 IQ138000 ntpd[1650]: proto: precision = 1.041 usec (-20)
Oct 11 05:21:59 IQ138000 ntpd[1650]: basedate set to 2020-09-11
Oct 11 05:21:59 IQ138000 ntpd[1650]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:21:59 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:21:59 IQ138000 persist_meter_data.sh[1645]: Error: No such file or directory
Oct 11 05:21:59 IQ138000 ntpd[1650]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:21:59 IQ138000 ntpd[1650]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:21:59 IQ138000 ntpd[1650]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:21:59 IQ138000 ntpd[1650]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:21:59 IQ138000 ntpd[1650]: Listen normally on 3 lo [::1]:123
Oct 11 05:21:59 IQ138000 ntpd[1650]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:21:59 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:21:59 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:21:59 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:21:59 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:21:59 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:21:59 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:21:59 IQ138000 wb-mqtt-w1[1678]: MQTT broker localhost:1883
Oct 11 05:21:59 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:21:59 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:21:59 IQ138000 wb-mqtt-w1[1678]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:21:59 IQ138000 wb-mqtt-w1[1678]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:21:59 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:21:59 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:21:59 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:21:59 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:21:59 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:21:59 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:21:59 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:21:59 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:21:59 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:21:59 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:21:59 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:21:59 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 05:21:59 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 05:21:59 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:21:59 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:21:59 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:21:59 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:21:59 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:21:59 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:21:59 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:21:59 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:21:59 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:21:59 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:21:59 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:21:59 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:21:59 IQ138000 sshd[1729]: Server listening on 0.0.0.0 port 22.
Oct 11 05:21:59 IQ138000 sshd[1729]: Server listening on :: port 22.
Oct 11 05:21:59 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:21:59 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:22:00 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:22:00 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:22:00 IQ138000 ntpd[1650]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:22:00 IQ138000 wb-connection-manager[1508]: Connection LegacyWiFi not found, skipping
Oct 11 05:22:00 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:00 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:22:00 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:22:00 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:22:00 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:22:00 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:22:00 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:22:00 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:22:00 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:22:00 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:22:00 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:22:00 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:22:00 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:22:00 IQ138000 wpa_supplicant[381]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:22:00 IQ138000 vnstatd[1652]: Info: vnStat daemon 2.6 started. (pid:1652 uid:110 gid:117 64-bit)
Oct 11 05:22:00 IQ138000 vnstatd[1652]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:22:00 IQ138000 vnstatd[1652]: Info: Interface "ppp0" disabled.
Oct 11 05:22:00 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:22:00 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:22:00 IQ138000 reverse-ssh.sh[1824]: Error: No such file or directory
Oct 11 05:22:00 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:22:00 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:00 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:22:00 IQ138000 wb-adjust-systime[1813]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:22:00 IQ138000 knxd[1837]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:22:00 IQ138000 knxd[1837]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:22:00 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:22:00 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:00 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:22:00 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:22:00 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:00 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:22:00 IQ138000 wb-adjust-systime[1813]: Drift file is valid (was recently edited)
Oct 11 05:22:00 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:22:01 IQ138000 ntpd[1650]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:22:01 IQ138000 mosquitto[1869]: 1760160120: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:22:01 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <error> [1760160121.1063] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.1067] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1508 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:22:01 IQ138000 wb-connection-manager[1508]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:22:01 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:22:01 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:22:01 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:22:01 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:22:01 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:22:01 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.6897] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.6905] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1508 uid=0 result="success"
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.6912] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.6934] manager: NetworkManager state is now CONNECTING
Oct 11 05:22:01 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.7257] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.7695] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.7697] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: MQTT broker localhost:1883
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:22:01 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:01 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.8914] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.8958] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.9171] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] Create indices if necessary
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.9178] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.9252] Config: added 'scan_ssid' value '1'
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.9253] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.9254] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:22:01 IQ138000 NetworkManager[404]: <info>  [1760160121.9265] Config: added 'psk' value '<hidden>'
Oct 11 05:22:01 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] Analyzing data table
Oct 11 05:22:01 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:22:02 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:22:02 IQ138000 ntpd[1650]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:22:02 IQ138000 NetworkManager[404]: <info>  [1760160122.0752] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:22:02 IQ138000 NetworkManager[404]: <info>  [1760160122.0754] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:22:02 IQ138000 wb-mqtt-knx[1964]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:02 IQ138000 wb-mqtt-knx[1964]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:02 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:22:02 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:22:02 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:22:02 IQ138000 wb-mqtt-logs[1974]: MQTT broker localhost:1883
Oct 11 05:22:02 IQ138000 wb-mqtt-logs[1974]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:02 IQ138000 wb-mqtt-logs[1974]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:02 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:22:02 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.548s CPU time.
Oct 11 05:22:02 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:22:02 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:22:03 IQ138000 ntpd[1650]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:22:03 IQ138000 wb-mqtt-confed[1935]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:03 IQ138000 wb-mqtt-confed[1935]: INFO: [wbgo_mqtt] confed-IQ138000-1935: MQTT connection established
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[1960]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:22:03 IQ138000 wb-mqtt-opcua[2004]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:22:03 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:22:03 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:22:03 IQ138000 wb-mqtt-iec104[2122]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:22:03 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:22:04 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:22:04 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:22:04 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:22:04 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:22:04 IQ138000 wb-mqtt-mbgate[1978]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:22:04 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio driver] Started
Oct 11 05:22:04 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:22:04 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:22:04 IQ138000 wb-mqtt-opcua[2146]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:22:04 IQ138000 wb-mqtt-opcua[2146]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:22:04 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:22:04 IQ138000 wb-mqtt-iec104[2122]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:22:04 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:22:04 IQ138000 wb-mqtt-logs[1974]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:04 IQ138000 wb-mqtt-logs[1974]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:04 IQ138000 wb-mqtt-logs[1974]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:04 IQ138000 wb-mqtt-logs[1974]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:22:04 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:22:04 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:22:04 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:22:04 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:04 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:22:04 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:22:05 IQ138000 wb-mqtt-knx[1964]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:05 IQ138000 wb-mqtt-knx[1964]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:05 IQ138000 wb-mqtt-knx[1964]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:05 IQ138000 wb-mqtt-knx[1964]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:22:05 IQ138000 wb-mqtt-knx[1964]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:22:06 IQ138000 python3[1904]: No data file found at /tmp/network_status_cache.json
Oct 11 05:22:06 IQ138000 python3[1904]: Connecting to MQTT
Oct 11 05:22:06 IQ138000 python3[1904]: Connected to MQTT
Oct 11 05:22:06 IQ138000 python3[1904]: Connection returned result: Connection Accepted.
Oct 11 05:22:07 IQ138000 NetworkManager[404]: <info>  [1760160127.0551] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:22:07 IQ138000 NetworkManager[404]: <info>  [1760160127.0553] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:22:07 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=1998 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:22:08 IQ138000 wb-device-manager[1920]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:22:08 IQ138000 wb-device-manager[1920]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New virtual device lo 9144f951-bb83-41e1-89e4-cf176513bd2f /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:22:08 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New active connection lo 9144f951-bb83-41e1-89e4-cf176513bd2f /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:22:09 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:09 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:10 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:22:10 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:22:10 IQ138000 kernel: dldo4: disabling
Oct 11 05:22:10 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:22:10 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:22:10 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:22:10 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:22:10 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:22:10 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:22:10 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:10 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:22:10 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:22:11 IQ138000 knxd[3071]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:22:11 IQ138000 knxd[3071]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:22:11 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:22:11 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:11 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:22:11 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:22:11 IQ138000 wb-mqtt-adc[3153]: MQTT broker localhost:1883
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:22:12 IQ138000 wb-mqtt-adc[3153]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-confed[1935]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:22:12 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:22:13 IQ138000 wb-mqtt-db[1942]: INFO: [sqlite] DB initialization is done
Oct 11 05:22:13 IQ138000 wb-gsm[3314]: main: Called from pid 1 (systemd)
Oct 11 05:22:13 IQ138000 wb-gsm[3364]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:22:13 IQ138000 wb-usb-otg-start.sh[3381]: : wb-usb-otg-start
Oct 11 05:22:13 IQ138000 wb-usb-otg-start.sh[3381]: main: setup_device()
Oct 11 05:22:14 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:22:14 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:22:14 IQ138000 kernel: using random self ethernet address
Oct 11 05:22:14 IQ138000 kernel: using random host ethernet address
Oct 11 05:22:14 IQ138000 wb-usb-otg-start.sh[3381]: main: enabling profile rndis
Oct 11 05:22:14 IQ138000 wb-gsm[3427]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:14 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:22:14 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:22:14 IQ138000 systemd-udevd[3405]: Using default interface naming scheme 'v247'.
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:22:14 IQ138000 NetworkManager[404]: <info>  [1760160134.4123] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:22:14 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:22:14 IQ138000 NetworkManager[404]: <info>  [1760160134.5704] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:22:14 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:22:14 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:22:14 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:22:14 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2456)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:22:15 IQ138000 NetworkManager[404]: <info>  [1760160135.7422] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:22:15 IQ138000 NetworkManager[404]: <info>  [1760160135.7424] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:22:15 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:22:15 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:22:16 IQ138000 wb-gsm[3576]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:22:16 IQ138000 wb-gsm[3587]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:22:16 IQ138000 python3[1904]: Выполнение: service wb-connection-manager stop
Oct 11 05:22:16 IQ138000 wb-gsm[3617]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:22:16 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:22:17 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: DB logger started, go to main loop
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:22:17 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:22:17 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:22:18 IQ138000 npm[1685]: > zigbee2mqtt@2.1.1 start
Oct 11 05:22:18 IQ138000 npm[1685]: > node index.js
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:22:18 IQ138000 wb-mqtt-db[1942]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:22:18 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:22:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:22:20 IQ138000 wb-gsm[3998]: mm_off: Modem is already OFF
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:20 IQ138000 npm[3746]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:22:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:21 IQ138000 wb-gsm[4069]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 05:22:21 IQ138000 wb-gsm[4080]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:22:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:21 IQ138000 wb-gsm[4103]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:22:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:24 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:22:24 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:24 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:24 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:22:24 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:24 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:24 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:22:24 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:22:24 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:22:24 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:22:24 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:22:24 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:22:24 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:22:24 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:22:24 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:22:24 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:22:24 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:22:24 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:22:24 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:22:24 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:22:24 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.150s CPU time.
Oct 11 05:22:24 IQ138000 python3[1904]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:22:24 IQ138000 python3[1904]:  
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: MQTT broker localhost:1883
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:22:24 IQ138000 knxd[4405]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:22:24 IQ138000 knxd[4405]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:22:24 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:22:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: w1 thread Started
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:22:24 IQ138000 wb-mqtt-w1[4415]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:25 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:26 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:27 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <warn>  [1760160147.5288] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <info>  [1760160147.5290] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <info>  [1760160147.5313] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <warn>  [1760160147.5331] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <info>  [1760160147.5344] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:27 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:22:27 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <info>  [1760160147.5793] manager: startup complete
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <info>  [1760160147.5806] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:22:27 IQ138000 NetworkManager[404]: <info>  [1760160147.5807] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:22:27 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:22:27 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:22:27 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:27 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:22:27 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:22:27 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:22:28 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:22:28 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:28 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:22:28 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:22:28 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:22:29 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:22:29 IQ138000 python3[1904]: Выполнение: mmcli -m wbc
Oct 11 05:22:29 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:29 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:22:29 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:29 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:22:30 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:22:30 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:22:30 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:22:30 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:22:30 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:22:30 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:22:30 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:22:30 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:22:30 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:22:30 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:22:30 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:22:30 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:22:30 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:22:30 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:22:30 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:22:30 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:22:30 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:22:30 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:22:30 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:22:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:30 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 05:22:30 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:22:30 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:22:30 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 05:22:30 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 05:22:30 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 05:22:30 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 05:22:30 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 05:22:30 IQ138000 watchdog[4627]:  no test binary files
Oct 11 05:22:30 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 05:22:30 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 05:22:30 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 05:22:30 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:22:30 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 05:22:30 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:22:30 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 05:22:30 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:22:30 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:22:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:30 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:22:30 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:22:30 IQ138000 systemd[1]: Startup finished in 3.792s (kernel) + 50.005s (userspace) = 53.798s.
Oct 11 05:22:30 IQ138000 wb-rules[4613]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:22:30 IQ138000 wb-rules[4613]: INFO: driver is created
Oct 11 05:22:30 IQ138000 wb-rules[4613]: INFO: [wbgo_mqtt] rules-IQ138000-4613: MQTT connection established
Oct 11 05:22:30 IQ138000 wb-rules[4613]: INFO: driver loop is started
Oct 11 05:22:30 IQ138000 wb-rules[4613]: INFO: wait for driver to become ready
Oct 11 05:22:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:30 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:22:32 IQ138000 wb-rules[4613]: INFO: driver is ready
Oct 11 05:22:32 IQ138000 wb-rules[4613]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:22:32 IQ138000 wb-rules[4613]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4613: MQTT connection established
Oct 11 05:22:32 IQ138000 wb-rules[4613]: INFO: [engine] Starting main loop
Oct 11 05:22:32 IQ138000 wb-rules[4613]: INFO: [engine] Starting sync loop
Oct 11 05:22:32 IQ138000 wb-rules[4613]: INFO: the engine is ready
Oct 11 05:22:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:33 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:22:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:22:33 IQ138000 wb-rules[4613]: WARNING: [rule warning] DAC: no config file
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:34 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:34 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:34 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:22:34 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:22:34 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:22:34 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:22:34 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:22:34 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:22:34 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:22:34 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 3e:86:93:50:28:5a
Oct 11 05:22:34 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:22:34 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:22:34 IQ138000 NetworkManager[404]: <info>  [1760160154.7255] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:22:34 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:22:34 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:22:34 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:22:34 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:22:34 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:22:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:22:34 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:22:34 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:22:34 IQ138000 knxd[4970]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:22:34 IQ138000 knxd[4970]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:22:34 IQ138000 systemd-udevd[4962]: Using default interface naming scheme 'v247'.
Oct 11 05:22:34 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:34 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:34 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:22:34 IQ138000 systemd-udevd[4962]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:22:36 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:36 IQ138000 python3[1904]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:22:36 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:37 IQ138000 wb-rules[4613]: INFO: all rule files are loaded
Oct 11 05:22:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:37 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:22:37 IQ138000 wb-gsm[5030]: mm_on: Waiting for modem to start
Oct 11 05:22:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:38 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:22:38 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:39 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:39 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 npm[3746]: [2025-10-11 05:22:40] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 npm[3746]: [2025-10-11 05:22:40] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:22:40 IQ138000 npm[3746]: [2025-10-11 05:22:40] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:40 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:41 IQ138000 npm[3746]: [2025-10-11 05:22:41] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:22:41 IQ138000 npm[3746]: [2025-10-11 05:22:41] info:         zh:zstack:znp: Serialport opened
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:22:41 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:22:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:22:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:42 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:44 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:44 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:22:44.315+00:00
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:22:44.315Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160344328,"cmd_timestamp_ms":1760160164328,"source":"schedule"}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160344328,"cmd_timestamp_ms":1760160164328,"source":"schedule"}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:22:44.485+00:00
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:22:44.485Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160344497,"cmd_timestamp_ms":1760160164497,"source":"schedule"}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160344497,"cmd_timestamp_ms":1760160164497,"source":"schedule"}
Oct 11 05:22:44 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:22:44.627+00:00
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:22:44.627Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160344642,"cmd_timestamp_ms":1760160164642,"source":"schedule"}
Oct 11 05:22:44 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160344642,"cmd_timestamp_ms":1760160164642,"source":"schedule"}
Oct 11 05:22:44 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: Currently 4 devices are joined.
Oct 11 05:22:44 IQ138000 npm[3746]: [2025-10-11 05:22:44] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:22:44 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:22:44 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:22:45 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:22:45.030+00:00
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:22:45.030Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345052,"cmd_timestamp_ms":1760160165052,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345052,"cmd_timestamp_ms":1760160165052,"source":"schedule"}
Oct 11 05:22:45 IQ138000 knxd[5150]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:22:45 IQ138000 knxd[5150]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:22:45 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:22:45 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:45 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:45 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:22:45.183+00:00
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:22:45.183Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345203,"cmd_timestamp_ms":1760160165203,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345203,"cmd_timestamp_ms":1760160165203,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:22:45.313+00:00
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:22:45.313Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345329,"cmd_timestamp_ms":1760160165329,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345329,"cmd_timestamp_ms":1760160165329,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 npm[3746]: [2025-10-11 05:22:45] info:         z2m: Connected to MQTT server
Oct 11 05:22:45 IQ138000 npm[3746]: [2025-10-11 05:22:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:22:45.496+00:00
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:22:45.496Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345519,"cmd_timestamp_ms":1760160165519,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345519,"cmd_timestamp_ms":1760160165519,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:22:45.648+00:00
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:22:45.648Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345663,"cmd_timestamp_ms":1760160165663,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160345663,"cmd_timestamp_ms":1760160165663,"source":"schedule"}
Oct 11 05:22:45 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:22:45 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:22:45 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:22:45 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:45 IQ138000 npm[3746]: [2025-10-11 05:22:45] info:         z2m: Started frontend on port 8282
Oct 11 05:22:46 IQ138000 npm[3746]: [2025-10-11 05:22:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 npm[3746]: [2025-10-11 05:22:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:22:46 IQ138000 npm[3746]: [2025-10-11 05:22:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:22:46.022+00:00
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:22:46 IQ138000 npm[3746]: [2025-10-11 05:22:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:22:46 IQ138000 npm[3746]: [2025-10-11 05:22:46] info:         z2m: Zigbee2MQTT started!
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:22:46.022Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160346072,"cmd_timestamp_ms":1760160166072,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160346072,"cmd_timestamp_ms":1760160166072,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:22:46.356+00:00
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:22:46.356Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160346373,"cmd_timestamp_ms":1760160166373,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160346373,"cmd_timestamp_ms":1760160166373,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:22:46.400+00:00
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:22:46.400Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160346417,"cmd_timestamp_ms":1760160166417,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160346417,"cmd_timestamp_ms":1760160166417,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:22:46.573+00:00
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:22:46.573Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760160346583,"cmd_timestamp_ms":1760160166583,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760160346583,"cmd_timestamp_ms":1760160166583,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:22:46.722+00:00
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:22:46.722Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760160346732,"cmd_timestamp_ms":1760160166732,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760160346732,"cmd_timestamp_ms":1760160166732,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:22:46.886+00:00
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:22:46.886Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160346896,"cmd_timestamp_ms":1760160166896,"source":"schedule"}
Oct 11 05:22:46 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160346896,"cmd_timestamp_ms":1760160166896,"source":"schedule"}
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:22:47.047+00:00
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:22:47.047Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160347061,"cmd_timestamp_ms":1760160167061,"source":"schedule"}
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160347061,"cmd_timestamp_ms":1760160167061,"source":"schedule"}
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:22:47 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:22:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:48 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:22:48 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:22:48 IQ138000 wb-watchdog[5269]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:22:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:22:48 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:48 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:48 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:22:48 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:22:48 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:22:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:49 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:49 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:50 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:51 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:22:52 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:53 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:54 IQ138000 ModemManager[470]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:22:54 IQ138000 ModemManager[470]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:22:54 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:55 IQ138000 ModemManager[470]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:22:55 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:22:55 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:22:55 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:22:55 IQ138000 knxd[5374]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:22:55 IQ138000 knxd[5374]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:22:55 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:22:55 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:22:55 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:22:55 IQ138000 ModemManager[470]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:22:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:55 IQ138000 python3[1904]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:22:55 IQ138000 ModemManager[470]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:22:55 IQ138000 ModemManager[470]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:22:56 IQ138000 ModemManager[470]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:22:56 IQ138000 ModemManager[470]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:22:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:56 IQ138000 ModemManager[470]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:22:56 IQ138000 ModemManager[470]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.6976] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7025] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7064] device (ttyUSB1): modem state 'enabling'
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7107] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7147] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7212] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7247] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:22:56 IQ138000 NetworkManager[404]: <info>  [1760160176.7279] manager: NetworkManager state is now CONNECTING
Oct 11 05:22:56 IQ138000 ModemManager[470]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:22:56 IQ138000 wb-mqtt-nm-helper[1998]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:22:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:56 IQ138000 ModemManager[470]: <info>  [modem0] power state updated: on
Oct 11 05:22:56 IQ138000 python3[1904]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:22:56 IQ138000 python3[1904]:    --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:22:56 IQ138000 python3[1904]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:22:56 IQ138000 python3[1904]:            |                model: A7602E-H
Oct 11 05:22:56 IQ138000 python3[1904]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:22:56 IQ138000 python3[1904]:            |            supported: gsm-umts
Oct 11 05:22:56 IQ138000 python3[1904]:            |              current: gsm-umts
Oct 11 05:22:56 IQ138000 python3[1904]:            |         equipment id: 860803062234204
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   System   |               device: wbc
Oct 11 05:22:56 IQ138000 python3[1904]:            |              drivers: option, rndis_host
Oct 11 05:22:56 IQ138000 python3[1904]:            |               plugin: simtech
Oct 11 05:22:56 IQ138000 python3[1904]:            |         primary port: ttyUSB1
Oct 11 05:22:56 IQ138000 python3[1904]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:22:56 IQ138000 python3[1904]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:22:56 IQ138000 python3[1904]:            |                state: enabling
Oct 11 05:22:56 IQ138000 python3[1904]:            |          power state: on
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:22:56 IQ138000 python3[1904]:            |              current: allowed: any; preferred: none
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   3GPP     |                 imei: 860803062234204
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:22:56 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:22:56 IQ138000 python3[1904]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:22:56 IQ138000 python3[1904]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:22:56 IQ138000 python3[1904]:            |                       slot 2: none
Oct 11 05:22:56 IQ138000 python3[1904]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:22:56 IQ138000 python3[1904]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:22:56 IQ138000 python3[1904]:  successfully requested primary SIM switch in modem
Oct 11 05:22:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:22:59 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:22:59 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:22:59 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:22:59 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:22:59 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:22:59 IQ138000 lsyncd[5424]: 05:22:59 Normal: --- Startup ---
Oct 11 05:22:59 IQ138000 lsyncd[5424]: 05:22:59 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:22:59 IQ138000 lsyncd[5424]: journal
Oct 11 05:22:59 IQ138000 lsyncd[5424]: messages
Oct 11 05:22:59 IQ138000 lsyncd[5424]: iq_network_manager/iq_network_manager.log
Oct 11 05:22:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:22:59 IQ138000 lsyncd[5431]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:22:59 IQ138000 lsyncd[5430]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:22:59 IQ138000 lsyncd[5430]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:22:59 IQ138000 lsyncd[5424]: 05:22:59 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:22:59 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:22:59 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:23:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] simple connect started...
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:23:00 IQ138000 ModemManager[470]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:23:01 IQ138000 ModemManager[470]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:23:01 IQ138000 ModemManager[470]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:23:01 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.0972] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.0993] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.1027] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:23:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.1051] ppp-manager: starting PPP connection
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.1180] ppp-manager: pppd started with pid 5440
Oct 11 05:23:01 IQ138000 pppd[5440]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: initializing
Oct 11 05:23:01 IQ138000 pppd[5440]: pppd 2.4.9 started by root, uid 0
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: Using interface ppp0
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:23:01 IQ138000 pppd[5440]: Using interface ppp0
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:23:01 IQ138000 pppd[5440]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.1819] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:23:01 IQ138000 pppd[5440]: PAP authentication succeeded
Oct 11 05:23:01 IQ138000 pppd[5440]: kernel does not support PPP filtering
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: PAP authentication succeeded
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: kernel does not support PPP filtering
Oct 11 05:23:01 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:23:01 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:23:01 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:23:01 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:23:01 IQ138000 ModemManager[470]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:23:01 IQ138000 pppd[5440]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:23:01 IQ138000 pppd[5440]: local  IP address 10.139.17.28
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: local  IP address 10.139.17.28
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: remote IP address 10.64.64.64
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: primary   DNS address 172.23.10.131
Oct 11 05:23:01 IQ138000 NetworkManager[5440]: secondary DNS address 172.23.10.130
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:23:01 IQ138000 pppd[5440]: remote IP address 10.64.64.64
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.8353] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:23:01 IQ138000 pppd[5440]: primary   DNS address 172.23.10.131
Oct 11 05:23:01 IQ138000 pppd[5440]: secondary DNS address 172.23.10.130
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: ip-up event
Oct 11 05:23:01 IQ138000 pppd[5440]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.8449] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.8474] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.8503] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.8558] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:23:01 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:23:01 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.9000] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:23:01 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:23:01 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:23:01 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:23:01 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:23:01 IQ138000 NetworkManager[404]: <info>  [1760160181.9990] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:23:02 IQ138000 NetworkManager[404]: <info>  [1760160182.0003] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:23:02 IQ138000 NetworkManager[404]: <info>  [1760160182.0027] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:23:02 IQ138000 NetworkManager[404]: <info>  [1760160182.0060] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:23:02 IQ138000 NetworkManager[404]: <info>  [1760160182.0096] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:23:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:23:03 IQ138000 ntpd[1650]: Listen normally on 4 ppp0 10.139.17.28:123
Oct 11 05:23:03 IQ138000 ntpd[1650]: new interface(s) found: waking up resolver
Oct 11 05:23:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:23:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:05 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:23:05 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:23:05 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:23:05 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:23:05 IQ138000 wb-mqtt-knx[1964]: INFO: knxd connected successfully
Oct 11 05:23:05 IQ138000 vnstatd[1652]: Info: Interface "ppp0" enabled.
Oct 11 05:23:06 IQ138000 python3[1904]: Выполнение: mmcli -i any
Oct 11 05:23:07 IQ138000 python3[1904]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:23:07 IQ138000 python3[1904]:    -------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:07 IQ138000 python3[1904]:   -------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Properties |            active: yes
Oct 11 05:23:07 IQ138000 python3[1904]:              |              imsi: 250997340491874
Oct 11 05:23:07 IQ138000 python3[1904]:              |             iccid: 8970199210429593744
Oct 11 05:23:07 IQ138000 python3[1904]:              |       operator id: 25099
Oct 11 05:23:07 IQ138000 python3[1904]:              |     operator name: Beeline
Oct 11 05:23:07 IQ138000 python3[1904]: Выполнение: mmcli -m wbc
Oct 11 05:23:07 IQ138000 python3[1904]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:23:07 IQ138000 python3[1904]:    --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:23:07 IQ138000 python3[1904]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:23:07 IQ138000 python3[1904]:            |                model: A7602E-H
Oct 11 05:23:07 IQ138000 python3[1904]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:23:07 IQ138000 python3[1904]:            |            supported: gsm-umts
Oct 11 05:23:07 IQ138000 python3[1904]:            |              current: gsm-umts
Oct 11 05:23:07 IQ138000 python3[1904]:            |         equipment id: 860803062234204
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   System   |               device: wbc
Oct 11 05:23:07 IQ138000 python3[1904]:            |              drivers: option, rndis_host
Oct 11 05:23:07 IQ138000 python3[1904]:            |               plugin: simtech
Oct 11 05:23:07 IQ138000 python3[1904]:            |         primary port: ttyUSB1
Oct 11 05:23:07 IQ138000 python3[1904]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:23:07 IQ138000 python3[1904]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:23:07 IQ138000 python3[1904]:            |                state: connected
Oct 11 05:23:07 IQ138000 python3[1904]:            |          power state: on
Oct 11 05:23:07 IQ138000 python3[1904]:            |          access tech: lte
Oct 11 05:23:07 IQ138000 python3[1904]:            |       signal quality: 93% (recent)
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:23:07 IQ138000 python3[1904]:            |              current: allowed: any; preferred: none
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   3GPP     |                 imei: 860803062234204
Oct 11 05:23:07 IQ138000 python3[1904]:            |          operator id: 25099
Oct 11 05:23:07 IQ138000 python3[1904]:            |        operator name: beeline
Oct 11 05:23:07 IQ138000 python3[1904]:            |         registration: home
Oct 11 05:23:07 IQ138000 python3[1904]:            | packet service state: attached
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:07 IQ138000 python3[1904]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:23:07 IQ138000 python3[1904]:            |                       slot 2: none
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:23:07 IQ138000 python3[1904]: Current state: home
Oct 11 05:23:07 IQ138000 python3[1904]: SIM registered in the network.
Oct 11 05:23:07 IQ138000 python3[1904]: Выполнение: mmcli -m wbc
Oct 11 05:23:07 IQ138000 python3[1904]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:23:07 IQ138000 python3[1904]:    --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:23:07 IQ138000 python3[1904]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:23:07 IQ138000 python3[1904]:            |                model: A7602E-H
Oct 11 05:23:07 IQ138000 python3[1904]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:23:07 IQ138000 python3[1904]:            |            supported: gsm-umts
Oct 11 05:23:07 IQ138000 python3[1904]:            |              current: gsm-umts
Oct 11 05:23:07 IQ138000 python3[1904]:            |         equipment id: 860803062234204
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   System   |               device: wbc
Oct 11 05:23:07 IQ138000 python3[1904]:            |              drivers: option, rndis_host
Oct 11 05:23:07 IQ138000 python3[1904]:            |               plugin: simtech
Oct 11 05:23:07 IQ138000 python3[1904]:            |         primary port: ttyUSB1
Oct 11 05:23:07 IQ138000 python3[1904]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:23:07 IQ138000 python3[1904]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:23:07 IQ138000 python3[1904]:            |                state: connected
Oct 11 05:23:07 IQ138000 python3[1904]:            |          power state: on
Oct 11 05:23:07 IQ138000 python3[1904]:            |          access tech: lte
Oct 11 05:23:07 IQ138000 python3[1904]:            |       signal quality: 93% (recent)
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:23:07 IQ138000 python3[1904]:            |              current: allowed: any; preferred: none
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   3GPP     |                 imei: 860803062234204
Oct 11 05:23:07 IQ138000 python3[1904]:            |          operator id: 25099
Oct 11 05:23:07 IQ138000 python3[1904]:            |        operator name: beeline
Oct 11 05:23:07 IQ138000 python3[1904]:            |         registration: home
Oct 11 05:23:07 IQ138000 python3[1904]:            | packet service state: attached
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:07 IQ138000 python3[1904]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:23:07 IQ138000 python3[1904]:            |                       slot 2: none
Oct 11 05:23:07 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:23:07 IQ138000 python3[1904]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:07 IQ138000 python3[1904]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:23:07 IQ138000 python3[1904]:    -------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:07 IQ138000 python3[1904]:   -------------------------------
Oct 11 05:23:07 IQ138000 python3[1904]:   Properties |            active: yes
Oct 11 05:23:07 IQ138000 python3[1904]:              |              imsi: 250997340491874
Oct 11 05:23:07 IQ138000 python3[1904]:              |             iccid: 8970199210429593744
Oct 11 05:23:07 IQ138000 python3[1904]:              |       operator id: 25099
Oct 11 05:23:07 IQ138000 python3[1904]:              |     operator name: Beeline
Oct 11 05:23:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:23:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:09 IQ138000 ntpd[1650]: Soliciting pool server 94.228.114.152
Oct 11 05:23:09 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:10 IQ138000 ntpd[1650]: Soliciting pool server 89.179.240.219
Oct 11 05:23:11 IQ138000 ntpd[1650]: Soliciting pool server 188.225.9.167
Oct 11 05:23:12 IQ138000 ntpd[1650]: Soliciting pool server 195.90.182.235
Oct 11 05:23:12 IQ138000 python3[1904]: Выполнение: mmcli -m wbc
Oct 11 05:23:12 IQ138000 python3[1904]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:23:12 IQ138000 python3[1904]:    --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:23:12 IQ138000 python3[1904]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:23:12 IQ138000 python3[1904]:            |                model: A7602E-H
Oct 11 05:23:12 IQ138000 python3[1904]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:23:12 IQ138000 python3[1904]:            |            supported: gsm-umts
Oct 11 05:23:12 IQ138000 python3[1904]:            |              current: gsm-umts
Oct 11 05:23:12 IQ138000 python3[1904]:            |         equipment id: 860803062234204
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   System   |               device: wbc
Oct 11 05:23:12 IQ138000 python3[1904]:            |              drivers: option, rndis_host
Oct 11 05:23:12 IQ138000 python3[1904]:            |               plugin: simtech
Oct 11 05:23:12 IQ138000 python3[1904]:            |         primary port: ttyUSB1
Oct 11 05:23:12 IQ138000 python3[1904]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:23:12 IQ138000 python3[1904]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:23:12 IQ138000 python3[1904]:            |                state: connected
Oct 11 05:23:12 IQ138000 python3[1904]:            |          power state: on
Oct 11 05:23:12 IQ138000 python3[1904]:            |          access tech: lte
Oct 11 05:23:12 IQ138000 python3[1904]:            |       signal quality: 93% (recent)
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:23:12 IQ138000 python3[1904]:            |              current: allowed: any; preferred: none
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   3GPP     |                 imei: 860803062234204
Oct 11 05:23:12 IQ138000 python3[1904]:            |          operator id: 25099
Oct 11 05:23:12 IQ138000 python3[1904]:            |        operator name: beeline
Oct 11 05:23:12 IQ138000 python3[1904]:            |         registration: home
Oct 11 05:23:12 IQ138000 python3[1904]:            | packet service state: attached
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:12 IQ138000 python3[1904]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:23:12 IQ138000 python3[1904]:            |                       slot 2: none
Oct 11 05:23:12 IQ138000 python3[1904]:   --------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:23:12 IQ138000 python3[1904]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:12 IQ138000 python3[1904]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:23:12 IQ138000 python3[1904]:    -------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:23:12 IQ138000 python3[1904]:   -------------------------------
Oct 11 05:23:12 IQ138000 python3[1904]:   Properties |            active: yes
Oct 11 05:23:12 IQ138000 python3[1904]:              |              imsi: 250997340491874
Oct 11 05:23:12 IQ138000 python3[1904]:              |             iccid: 8970199210429593744
Oct 11 05:23:12 IQ138000 python3[1904]:              |       operator id: 25099
Oct 11 05:23:12 IQ138000 python3[1904]:              |     operator name: Beeline
Oct 11 05:23:12 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:23:13 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:23:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:14 IQ138000 ntpd[1650]: Soliciting pool server 51.250.110.169
Oct 11 05:23:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:23:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:15 IQ138000 ntpd[1650]: Soliciting pool server 91.224.234.189
Oct 11 05:23:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:23:16 IQ138000 ntpd[1650]: Soliciting pool server 151.0.2.54
-- Boot 987235c4e07e414ab0bb32108f354a28 --
Oct 11 05:24:58 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:24:58 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:24:58 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:24:58 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:24:58 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:24:58 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:24:58 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:24:58 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:24:58 IQ138000 kernel: Zone ranges:
Oct 11 05:24:58 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:24:58 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:24:58 IQ138000 kernel: Movable zone start for each node
Oct 11 05:24:58 IQ138000 kernel: Early memory node ranges
Oct 11 05:24:58 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:24:58 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:24:58 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:24:58 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:24:58 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:24:58 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:24:58 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:24:58 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:24:58 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:24:58 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:24:58 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:24:58 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:24:58 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:24:58 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:24:58 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:24:58 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:24:58 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:24:58 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:24:58 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:24:58 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:24:58 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:24:58 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:24:58 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:24:58 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:24:58 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:24:58 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:24:58 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:24:58 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:24:58 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:24:58 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:24:58 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:24:58 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:24:58 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:24:58 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:24:58 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:24:58 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:24:58 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:24:58 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:24:58 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:24:58 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:24:58 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:24:58 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:24:58 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:24:58 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:24:58 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:24:58 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:24:58 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:24:58 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:24:58 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:24:58 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:24:58 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:24:58 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:24:58 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:24:58 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:24:58 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:24:58 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:24:58 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:24:58 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:24:58 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:24:58 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:24:58 IQ138000 kernel: No ATAGs?
Oct 11 05:24:58 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:24:58 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:24:58 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:24:58 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:24:58 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:24:58 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:24:58 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:24:58 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:24:58 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:24:58 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:24:58 IQ138000 kernel: PTP clock support registered
Oct 11 05:24:58 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:24:58 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:24:58 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:24:58 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:24:58 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:24:58 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:24:58 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:24:58 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:24:58 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:24:58 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:24:58 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:24:58 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:24:58 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:24:58 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:24:58 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:24:58 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:24:58 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:24:58 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:24:58 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:24:58 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:24:58 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:24:58 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:24:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:24:58 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:24:58 IQ138000 kernel: brd: module loaded
Oct 11 05:24:58 IQ138000 kernel: loop: module loaded
Oct 11 05:24:58 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:24:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:24:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:24:58 IQ138000 kernel: CAN device driver interface
Oct 11 05:24:58 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:24:58 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:24:58 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:24:58 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:24:58 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:24:58 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:24:58 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:24:58 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:24:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:24:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:24:58 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:24:58 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:24:58 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:24:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:24:58 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:24:58 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:24:58 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:24:58 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:24:58 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:24:58 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:24:58 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:24:58 IQ138000 kernel: can: controller area network core
Oct 11 05:24:58 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:24:58 IQ138000 kernel: can: raw protocol
Oct 11 05:24:58 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:24:58 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:24:58 IQ138000 kernel: can: SAE J1939
Oct 11 05:24:58 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:24:58 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:24:58 IQ138000 kernel: registered taskstats version 1
Oct 11 05:24:58 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:24:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:24:58 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:24:58 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:24:58 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:24:58 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:24:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:24:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:24:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:24:54 UTC (1760160294)
Oct 11 05:24:58 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:24:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:24:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:24:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:24:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:24:58 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:24:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:24:58 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:24:58 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:24:58 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:24:58 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:24:58 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:24:58 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:24:58 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:24:58 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: random: fast init done
Oct 11 05:24:58 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:24:58 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:24:58 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:24:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:24:58 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:24:58 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:24:58 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:24:58 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:24:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:24:58 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:24:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:24:58 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:24:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:24:58 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:24:58 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:24:58 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:24:58 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:24:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:24:58 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:24:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:24:58 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:24:58 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:24:58 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:24:58 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:24:58 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:24:58 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:24:58 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:24:58 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:24:58 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:24:58 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:24:58 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:24:58 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:24:58 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:24:58 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:24:58 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:24:58 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:24:58 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:24:58 IQ138000 kernel: of_cfs_init
Oct 11 05:24:58 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:24:58 IQ138000 kernel: ALSA device list:
Oct 11 05:24:58 IQ138000 kernel:   No soundcards found.
Oct 11 05:24:58 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:24:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:24:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:24:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:24:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:24:58 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:24:58 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:24:58 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:24:58 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:24:58 IQ138000 kernel:   with arguments:
Oct 11 05:24:58 IQ138000 kernel:     /sbin/init
Oct 11 05:24:58 IQ138000 kernel:   with environment:
Oct 11 05:24:58 IQ138000 kernel:     HOME=/
Oct 11 05:24:58 IQ138000 kernel:     TERM=linux
Oct 11 05:24:58 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:24:58 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:24:58 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:24:58 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:24:58 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:24:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:24:58 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:24:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:24:58 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:24:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:24:58 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:24:58 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:24:58 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:24:58 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:24:58 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:24:58 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:24:58 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:24:58 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:24:58 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:24:58 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:24:58 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:24:58 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:24:58 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:24:58 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:24:58 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:24:58 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:24:58 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:24:58 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:24:58 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:24:58 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:24:58 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:24:58 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:24:58 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:24:58 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:24:58 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:24:58 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:24:58 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:24:58 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:24:58 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:24:58 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:24:58 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:24:58 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:24:58 IQ138000 systemd-journald[139]: Journal started
Oct 11 05:24:58 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:24:58 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:24:58 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:24:58 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:24:58 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:24:58 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:24:58 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:24:58 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:24:58 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:24:58 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:24:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:24:58 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:24:58 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:24:59 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:24:59 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:24:59 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:24:59 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:24:59 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:24:59 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:24:59 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:24:59 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:24:59 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:24:59 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:24:59 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:24:59 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:24:59 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:24:59 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:24:59 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:24:59 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:24:59 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:24:59 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:25:00 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 05:25:00 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:25:00 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:25:00 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:25:00 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:25:00 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:25:00 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:25:00 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:25:00 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:25:00 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:25:00 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:25:00 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:25:00 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:25:00 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:25:00 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:25:00 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:25:00 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 systemd-udevd[163]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:25:00 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:25:00 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:25:00 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:25:00 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:25:00 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:25:00 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:25:00 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:25:00 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:25:00 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:25:01 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:25:01 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:25:01 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:25:01 IQ138000 systemd-fsck[200]: data: recovering journal
Oct 11 05:25:01 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:25:01 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:25:01 IQ138000 systemd-fsck[200]: data: clean, 16453/328656 files, 365684/1313536 blocks
Oct 11 05:25:01 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:25:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:25:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:25:01 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:25:01 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:25:01 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 05:25:01 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 05:25:01 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:25:01 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:25:01 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:25:01 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:25:01 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:25:01 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:25:01 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:25:01 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:25:01 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:25:01 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:25:01 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:25:01 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:25:01 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:25:01 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:25:01 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:25:01 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:25:01 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:25:01 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:25:01 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:25:01 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:25:01 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:25:01 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:25:01 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.679ms for 462 entries.
Oct 11 05:25:01 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 482.3M, max 496.6M, 14.2M free.
Oct 11 05:25:02 IQ138000 kernel: random: crng init done
Oct 11 05:25:02 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:25:01 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:25:02 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 05:25:02 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:25:02 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:25:02 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:25:02 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:25:02 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:25:02 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:25:02 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:25:02 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:25:02 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:25:03 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:25:03 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:25:03 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:25:03 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:25:03 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:25:03 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:25:03 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:25:03 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:25:03 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:25:03 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:25:03 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:25:03 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:25:03 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:25:03 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:25:03 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:25:03 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:25:03 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:25:03 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:25:03 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:25:03 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:25:03 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:25:03 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:25:03 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 05:25:03 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:25:03 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:25:03 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 05:25:03 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:25:03 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:25:03 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:25:03 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:25:03 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:25:03 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:25:03 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 05:25:03 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:25:03 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:25:03 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 05:25:03 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:25:03 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:25:03 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:25:03 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:25:03 IQ138000 wb-watchdog[327]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:25:03 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:25:04 IQ138000 migrate.sh[325]: Error: No such file or directory
Oct 11 05:25:04 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:25:04 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:25:04 IQ138000 migrate.sh[340]: Error: No such file or directory
Oct 11 05:25:04 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Oct 11 05:25:04 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:25:04 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:25:04 IQ138000 migrate.sh[354]: Error: No such file or directory
Oct 11 05:25:04 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:25:04 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:25:04 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:25:04 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:25:04 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:25:04 IQ138000 migrate.sh[365]: Error: No such file or directory
Oct 11 05:25:04 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:25:04 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:25:04 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:25:04 IQ138000 rules-preprocessor[338]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:25:04 IQ138000 rules-preprocessor[338]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Successfully dropped root privileges.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: avahi-daemon 0.8 starting up.
Oct 11 05:25:04 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Successfully called chroot().
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Successfully dropped remaining capabilities.
Oct 11 05:25:04 IQ138000 migrate.sh[378]: Error: No such file or directory
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: No service file found in /etc/avahi/services.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Network interface enumeration completed.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Registering new address record for ::1 on lo.*.
Oct 11 05:25:04 IQ138000 avahi-daemon[363]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:25:04 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:25:04 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:25:04 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:25:04 IQ138000 wpa_supplicant[377]: Successfully initialized wpa_supplicant
Oct 11 05:25:04 IQ138000 wb-watch-configs[391]: Watched dirs: /etc /etc/network
Oct 11 05:25:04 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:25:04 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:25:04 IQ138000 systemd-logind[344]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:25:04 IQ138000 systemd-logind[344]: New seat seat0.
Oct 11 05:25:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:25:04 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:25:04 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:25:04 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:04 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:25:04 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:25:04 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:25:04 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:25:04 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:25:04 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:04 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:25:04 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:25:04 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:25:04 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:25:04 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:25:04 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:25:04 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:25:05 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:25:05 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.0968] NetworkManager (version 1.42.4) is starting... (boot:987235c4-e07e-414a-b0bb-32108f354a28)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.0972] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:25:05 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.1136] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:25:05 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 05:25:05 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.1606] manager[0x6e6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:25:05 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:25:05 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:25:05 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:25:05 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:25:05 IQ138000 avahi-daemon[363]: Server startup complete. Host name is IQ138000.local. Local service cookie is 714219672.
Oct 11 05:25:05 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:25:05 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:25:05 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:25:05 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:25:05 IQ138000 ModemManager[485]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:25:05 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:25:05 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8142] hostname: hostname: using hostnamed
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8145] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8181] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8262] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8281] manager[0x6e6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8283] manager[0x6e6900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8583] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8671] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8728] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.8973] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9012] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9104] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9113] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9127] manager: Networking is enabled by state file
Oct 11 05:25:05 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:25:05 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9183] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9186] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9187] ifupdown: management mode: unmanaged
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9189] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9190] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9740] dhcp: init: Using DHCP client 'internal'
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9774] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9911] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:25:05 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:25:05 IQ138000 NetworkManager[406]: <info>  [1760160305.9991] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.0118] device (lo): Activation: starting connection 'lo' (4e9d6e17-0634-4683-b6b6-694447f42c13)
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.0252] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.0501] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:06 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:25:06 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.4029] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.4052] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.4117] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.4184] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:25:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:25:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:25:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:25:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.6145] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.6335] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.6443] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:25:06 IQ138000 NetworkManager[406]: <info>  [1760160306.6501] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:06 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:25:07 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.4711] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.4757] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.4785] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.5284] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.5338] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.5420] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.5531] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 wpa_supplicant[377]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.6091] modem-manager: ModemManager available
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.6096] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.6118] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.6177] device (lo): Activation: successful, device activated.
Oct 11 05:25:07 IQ138000 wpa_supplicant[377]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9157] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9164] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9199] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9223] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9292] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9297] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9317] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9373] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9408] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9448] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9468] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:25:07 IQ138000 NetworkManager[406]: <info>  [1760160307.9510] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:08 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:25:08 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:25:08 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:25:11 IQ138000 init.sh[1322]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:25:11 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:25:11 IQ138000 init.sh[1336]: In file included from -:16:
Oct 11 05:25:11 IQ138000 init.sh[1336]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:11 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:25:11 IQ138000 init.sh[1322]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:25:11 IQ138000 init.sh[1322]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:25:11 IQ138000 init.sh[1397]: In file included from -:11:
Oct 11 05:25:11 IQ138000 init.sh[1397]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:12 IQ138000 init.sh[1322]: ...
Oct 11 05:25:12 IQ138000 init.sh[1412]: In file included from -:11:
Oct 11 05:25:12 IQ138000 init.sh[1412]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:12 IQ138000 init.sh[1322]: failsafe bias enabled
Oct 11 05:25:12 IQ138000 init.sh[1322]: terminators are enabled
Oct 11 05:25:12 IQ138000 init.sh[1322]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:25:12 IQ138000 init.sh[1432]: In file included from -:24:
Oct 11 05:25:12 IQ138000 init.sh[1432]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:12 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:25:12 IQ138000 init.sh[1322]: ...
Oct 11 05:25:12 IQ138000 init.sh[1447]: In file included from -:24:
Oct 11 05:25:12 IQ138000 init.sh[1447]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:13 IQ138000 init.sh[1322]: failsafe bias enabled
Oct 11 05:25:13 IQ138000 init.sh[1322]: terminators are enabled
Oct 11 05:25:13 IQ138000 init.sh[1322]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:25:13 IQ138000 init.sh[1469]: In file included from -:11:
Oct 11 05:25:13 IQ138000 init.sh[1469]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:13 IQ138000 init.sh[1322]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:25:13 IQ138000 init.sh[1492]: In file included from -:11:
Oct 11 05:25:13 IQ138000 init.sh[1492]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:25:13 IQ138000 init.sh[1322]: ...
Oct 11 05:25:13 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:25:13 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:25:13 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:25:14 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:25:14 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:25:14 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:25:14 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:25:14 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:25:14 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:25:14 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:25:14 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:25:14 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:25:14 IQ138000 lsyncd[1609]: 05:25:14 Normal: --- Startup ---
Oct 11 05:25:14 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:25:14 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:25:14 IQ138000 lsyncd[1609]: 05:25:14 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:25:14 IQ138000 lsyncd[1609]: journal
Oct 11 05:25:14 IQ138000 lsyncd[1609]: iq_network_manager/iq_network_manager.log
Oct 11 05:25:14 IQ138000 lsyncd[1609]: messages
Oct 11 05:25:14 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:25:14 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:25:14 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:25:14 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:25:14 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:25:14 IQ138000 lsyncd[1631]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:25:14 IQ138000 lsyncd[1622]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:25:14 IQ138000 lsyncd[1622]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:25:14 IQ138000 lsyncd[1609]: 05:25:14 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:25:14 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:25:14 IQ138000 ntpd[1620]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:25:14 IQ138000 ntpd[1620]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:25:14 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:25:14 IQ138000 ntpd[1620]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:25:14 IQ138000 ntpd[1620]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:25:14 IQ138000 ntpd[1620]: corporation.  Support and training for ntp-4 are
Oct 11 05:25:14 IQ138000 ntpd[1620]: available at https://www.nwtime.org/support
Oct 11 05:25:14 IQ138000 ntpd[1620]: ----------------------------------------------------
Oct 11 05:25:14 IQ138000 persist_meter_data.sh[1645]: Error: No such file or directory
Oct 11 05:25:14 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:25:14 IQ138000 ntpd[1653]: proto: precision = 1.041 usec (-20)
Oct 11 05:25:14 IQ138000 ntpd[1653]: basedate set to 2020-09-11
Oct 11 05:25:14 IQ138000 ntpd[1653]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:25:14 IQ138000 ntpd[1653]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:25:14 IQ138000 ntpd[1653]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:25:14 IQ138000 ntpd[1653]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:25:14 IQ138000 ntpd[1653]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:25:14 IQ138000 ntpd[1653]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:25:14 IQ138000 ntpd[1653]: Listen normally on 3 lo [::1]:123
Oct 11 05:25:14 IQ138000 ntpd[1653]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:25:14 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:25:15 IQ138000 NetworkManager[406]: <info>  [1760160315.0409] manager: startup complete
Oct 11 05:25:15 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:25:15 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:25:15 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:25:15 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:25:15 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:25:15 IQ138000 wb-mqtt-w1[1678]: MQTT broker localhost:1883
Oct 11 05:25:15 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:15 IQ138000 wb-mqtt-w1[1678]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:25:15 IQ138000 wb-knxd-config.sh[1521]: No /dev/ttyKNX found, disabling level2
Oct 11 05:25:15 IQ138000 wb-mqtt-w1[1678]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:25:15 IQ138000 wb-mqtt-w1[1678]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:25:15 IQ138000 wb-knxd-config.sh[1521]: Restart knxd
Oct 11 05:25:15 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:25:15 IQ138000 wb-connection-manager[1509]: Connection LegacyWiFi not found, skipping
Oct 11 05:25:15 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:25:15 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:25:15 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:25:15 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:25:15 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:25:15 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:25:15 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:25:15 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:25:15 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:15 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:25:15 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:25:15 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:25:15 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:25:15 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:15 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:25:15 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:25:15 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:25:15 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:25:15 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:25:15 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:25:15 IQ138000 ntpd[1653]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:25:15 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:25:15 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:25:15 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:25:15 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:25:15 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:25:16 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:25:16 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:25:16 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:25:16 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:16 IQ138000 vnstatd[1654]: Info: vnStat daemon 2.6 started. (pid:1654 uid:110 gid:117 64-bit)
Oct 11 05:25:16 IQ138000 vnstatd[1654]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:25:16 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 05:25:16 IQ138000 sshd[1742]: Server listening on 0.0.0.0 port 22.
Oct 11 05:25:16 IQ138000 sshd[1742]: Server listening on :: port 22.
Oct 11 05:25:16 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:25:16 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:25:16 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:25:16 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <error> [1760160316.3337] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.3341] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1509 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:25:16 IQ138000 wb-connection-manager[1509]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:25:16 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:25:16 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:25:16 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:25:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:25:16 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:25:16 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:25:16 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:25:16 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:25:16 IQ138000 reverse-ssh.sh[1864]: Error: No such file or directory
Oct 11 05:25:16 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:25:16 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:16 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:25:16 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:25:16 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.8516] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.8523] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1509 uid=0 result="success"
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.8530] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.8550] manager: NetworkManager state is now CONNECTING
Oct 11 05:25:16 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:16 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.8970] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9007] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9009] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:16 IQ138000 ntpd[1653]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9280] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9419] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9512] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9519] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9520] Config: added 'scan_ssid' value '1'
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9521] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9523] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:25:16 IQ138000 NetworkManager[406]: <info>  [1760160316.9524] Config: added 'psk' value '<hidden>'
Oct 11 05:25:17 IQ138000 NetworkManager[406]: <info>  [1760160317.1375] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:25:17 IQ138000 NetworkManager[406]: <info>  [1760160317.1377] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:25:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:25:17 IQ138000 wb-adjust-systime[1863]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:25:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:25:17 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:25:17 IQ138000 mosquitto[1907]: 1760160317: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:25:17 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:25:17 IQ138000 wb-adjust-systime[1863]: Drift file is valid (was recently edited)
Oct 11 05:25:17 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:25:17 IQ138000 knxd[1927]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:25:17 IQ138000 knxd[1927]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:25:17 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:25:17 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:25:17 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:25:17 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:25:17 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:25:17 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:25:17 IQ138000 ntpd[1653]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:25:17 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:25:18 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:25:18 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: MQTT broker localhost:1883
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:25:18 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:18 IQ138000 wb-mqtt-logs[2025]: MQTT broker localhost:1883
Oct 11 05:25:18 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:18 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:18 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:25:18 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] Create indices if necessary
Oct 11 05:25:18 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] Analyzing data table
Oct 11 05:25:18 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:25:18 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:25:18 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.555s CPU time.
Oct 11 05:25:18 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:25:18 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:25:18 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:18 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:25:18 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:25:18 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:25:18 IQ138000 ntpd[1653]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:25:18 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:25:19 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:25:19 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:25:19 IQ138000 wb-mqtt-gpio[1876]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:25:19 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:25:19 IQ138000 wb-mqtt-gpio[1876]: INFO: [gpio driver] Started
Oct 11 05:25:19 IQ138000 wb-mqtt-knx[2143]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:19 IQ138000 wb-mqtt-knx[2143]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:25:19 IQ138000 wb-mqtt-confed[1990]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:25:19 IQ138000 wb-mqtt-opcua[2067]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:25:19 IQ138000 wb-mqtt-confed[1990]: INFO: [wbgo_mqtt] confed-IQ138000-1990: MQTT connection established
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:25:19 IQ138000 wb-mqtt-mbgate[2036]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:25:19 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:25:19 IQ138000 wb-mqtt-iec104[2020]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:25:20 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:25:20 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:25:20 IQ138000 wb-mqtt-opcua[2253]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:25:20 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:25:20 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:25:20 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:25:20 IQ138000 wb-mqtt-iec104[2280]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:25:20 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:20 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:20 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:20 IQ138000 wb-mqtt-logs[2025]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:25:21 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:21 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:25:21 IQ138000 wb-mqtt-opcua[2253]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:25:21 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:25:21 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:25:21 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:25:21 IQ138000 wb-mqtt-knx[2143]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:21 IQ138000 wb-mqtt-knx[2143]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:21 IQ138000 wb-mqtt-knx[2143]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:21 IQ138000 wb-mqtt-knx[2143]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:25:22 IQ138000 wb-mqtt-knx[2143]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:25:22 IQ138000 wb-mqtt-iec104[2280]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:25:22 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:25:22 IQ138000 NetworkManager[406]: <info>  [1760160322.8012] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:25:22 IQ138000 NetworkManager[406]: <info>  [1760160322.8015] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:25:22 IQ138000 python3[1961]: No data file found at /tmp/network_status_cache.json
Oct 11 05:25:22 IQ138000 python3[1961]: Connecting to MQTT
Oct 11 05:25:23 IQ138000 python3[1961]: Connected to MQTT
Oct 11 05:25:23 IQ138000 python3[1961]: Connection returned result: Connection Accepted.
Oct 11 05:25:24 IQ138000 wb-device-manager[1972]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:25:24 IQ138000 wb-device-manager[1972]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:25:25 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:25 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:25 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2051 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New virtual device lo 4e9d6e17-0634-4683-b6b6-694447f42c13 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:25:25 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:25:26 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New active connection lo 4e9d6e17-0634-4683-b6b6-694447f42c13 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:25:26 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:25:26 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:25:26 IQ138000 kernel: dldo4: disabling
Oct 11 05:25:26 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:25:26 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:25:27 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:25:27 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:25:27 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:25:27 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:25:27 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: MQTT broker localhost:1883
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:25:27 IQ138000 wb-mqtt-adc[3174]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-confed[1990]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:25:28 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:25:29 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:29 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:25:29 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:25:29 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:25:29 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:25:29 IQ138000 wb-mqtt-serial[1666]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:25:29 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:25:29 IQ138000 knxd[3341]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:25:29 IQ138000 knxd[3341]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:25:29 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:25:29 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:29 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:25:29 IQ138000 wb-gsm[3379]: main: Called from pid 1 (systemd)
Oct 11 05:25:29 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] DB initialization is done
Oct 11 05:25:29 IQ138000 wb-gsm[3428]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:25:30 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:25:30 IQ138000 wb-usb-otg-start.sh[3503]: : wb-usb-otg-start
Oct 11 05:25:30 IQ138000 wb-usb-otg-start.sh[3503]: main: setup_device()
Oct 11 05:25:30 IQ138000 wb-gsm[3501]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:25:30 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:25:30 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:25:30 IQ138000 kernel: using random self ethernet address
Oct 11 05:25:30 IQ138000 kernel: using random host ethernet address
Oct 11 05:25:30 IQ138000 wb-usb-otg-start.sh[3503]: main: enabling profile rndis
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:25:30 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:25:30 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:25:30 IQ138000 systemd-udevd[3466]: Using default interface naming scheme 'v247'.
Oct 11 05:25:30 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:25:30 IQ138000 NetworkManager[406]: <info>  [1760160330.6438] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:25:30 IQ138000 NetworkManager[406]: <info>  [1760160330.7848] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:25:30 IQ138000 wb-gsm[3558]: should_enable: Should enable GSM modem
Oct 11 05:25:30 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:25:30 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:25:31 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1936)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1943)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:25:31 IQ138000 NetworkManager[406]: <info>  [1760160331.5516] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:25:31 IQ138000 NetworkManager[406]: <info>  [1760160331.5518] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:25:31 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:25:32 IQ138000 wb-gsm[3629]: main: Called from pid 3559 (wb-gsm-mm)
Oct 11 05:25:32 IQ138000 wb-gsm[3640]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:25:32 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:25:32 IQ138000 wb-gsm[3664]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:25:33 IQ138000 python3[1961]: Выполнение: service wb-connection-manager stop
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:25:33 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: DB logger started, go to main loop
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:33 IQ138000 npm[1685]: > zigbee2mqtt@2.1.1 start
Oct 11 05:25:33 IQ138000 npm[1685]: > node index.js
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:25:33 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:25:33 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:25:34 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:34 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:25:35 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:25:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:25:36 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:25:36 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:25:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:36 IQ138000 wb-gsm[4049]: mm_off: Modem is already OFF
Oct 11 05:25:36 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:36 IQ138000 npm[3765]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:25:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:37 IQ138000 wb-gsm[4120]: main: Called from pid 3559 (wb-gsm-mm)
Oct 11 05:25:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:37 IQ138000 wb-gsm[4131]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:25:37 IQ138000 wb-gsm[4154]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:25:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:37 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:25:38 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:25:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:25:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:25:39 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:25:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:25:39 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:25:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:25:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:40 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:25:40 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:25:40 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:40 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:40 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:40 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:40 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:40 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:25:40 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:25:40 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:25:40 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:25:40 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:25:40 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:25:40 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:25:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:40 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:25:40 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:25:40 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:25:40 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:25:40 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:25:40 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:40 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:25:40 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:25:40 IQ138000 wb-mqtt-w1[4505]: MQTT broker localhost:1883
Oct 11 05:25:40 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:25:40 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:25:40 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:25:40 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:25:41 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:25:41 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:25:41 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:25:41 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:25:41 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:25:41 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:25:41 IQ138000 knxd[4500]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:25:41 IQ138000 knxd[4500]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:25:41 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:25:41 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.143s CPU time.
Oct 11 05:25:41 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:25:41 IQ138000 wb-mqtt-w1[4505]: INFO: w1 thread Started
Oct 11 05:25:41 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:41 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:25:41 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:25:41 IQ138000 wb-mqtt-w1[4505]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:25:41 IQ138000 python3[1961]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:25:41 IQ138000 python3[1961]:  
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:25:41 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <warn>  [1760160342.5281] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <info>  [1760160342.5282] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <info>  [1760160342.5303] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <warn>  [1760160342.5322] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <info>  [1760160342.5335] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <info>  [1760160342.5593] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:25:42 IQ138000 NetworkManager[406]: <info>  [1760160342.5611] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:25:42 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:42 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:25:43 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:25:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:25:44 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:25:44 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:25:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:25:44 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:25:44 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:25:44 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:25:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:45 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:25:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:46 IQ138000 python3[1961]: Выполнение: mmcli -m wbc
Oct 11 05:25:46 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:46 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:25:46 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:25:46 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:25:46 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:25:46 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:25:46 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:25:46 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:25:46 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:25:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:25:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:25:46 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:25:46 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:25:46 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:25:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:25:46 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:25:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:25:46 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:25:46 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:25:46 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:25:46 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:25:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:46 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:25:46 IQ138000 watchdog[4629]: starting daemon (5.16):
Oct 11 05:25:46 IQ138000 watchdog[4629]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:25:46 IQ138000 watchdog[4629]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:25:46 IQ138000 watchdog[4629]:  ping: no machine to check
Oct 11 05:25:46 IQ138000 watchdog[4629]:  file: no file to check
Oct 11 05:25:46 IQ138000 watchdog[4629]:  pidfile: /var/run/sshd.pid
Oct 11 05:25:46 IQ138000 watchdog[4629]:  interface: no interface to check
Oct 11 05:25:46 IQ138000 watchdog[4629]:  temperature: no sensors to check
Oct 11 05:25:46 IQ138000 watchdog[4629]:  no test binary files
Oct 11 05:25:46 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:25:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:46 IQ138000 watchdog[4629]:  no repair binary files
Oct 11 05:25:46 IQ138000 watchdog[4629]:  error retry time-out = 30 seconds
Oct 11 05:25:46 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:25:46 IQ138000 watchdog[4629]:  repair attempts = 1
Oct 11 05:25:46 IQ138000 watchdog[4629]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:25:46 IQ138000 watchdog[4629]: watchdog now set to 120 seconds
Oct 11 05:25:46 IQ138000 watchdog[4629]: hardware watchdog identity: WBEC WDT
Oct 11 05:25:46 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:25:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:46 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:25:46 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:25:46 IQ138000 systemd[1]: Startup finished in 3.804s (kernel) + 50.288s (userspace) = 54.093s.
Oct 11 05:25:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:46 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:46 IQ138000 wb-rules[4610]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:25:46 IQ138000 wb-rules[4610]: INFO: driver is created
Oct 11 05:25:46 IQ138000 wb-rules[4610]: INFO: driver loop is started
Oct 11 05:25:46 IQ138000 wb-rules[4610]: INFO: wait for driver to become ready
Oct 11 05:25:46 IQ138000 wb-rules[4610]: INFO: [wbgo_mqtt] rules-IQ138000-4610: MQTT connection established
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:47 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:25:48 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-rules[4610]: INFO: driver is ready
Oct 11 05:25:48 IQ138000 wb-rules[4610]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:25:48 IQ138000 wb-rules[4610]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4610: MQTT connection established
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:48 IQ138000 wb-rules[4610]: INFO: [engine] Starting main loop
Oct 11 05:25:48 IQ138000 wb-rules[4610]: INFO: the engine is ready
Oct 11 05:25:48 IQ138000 wb-rules[4610]: INFO: [engine] Starting sync loop
Oct 11 05:25:48 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:49 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:49 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:25:50 IQ138000 wb-rules[4610]: WARNING: [rule warning] DAC: no config file
Oct 11 05:25:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:50 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:25:50 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:25:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:50 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:25:50 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:50 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:25:50 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:25:50 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:25:50 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:25:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:25:50 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, e2:68:83:24:a9:02
Oct 11 05:25:50 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:25:50 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:25:50 IQ138000 NetworkManager[406]: <info>  [1760160350.7891] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:25:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:25:50 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:25:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:25:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:25:50 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:25:50 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:25:50 IQ138000 systemd-udevd[4967]: Using default interface naming scheme 'v247'.
Oct 11 05:25:50 IQ138000 systemd-udevd[4967]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:25:50 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:25:51 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:25:51 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:25:51 IQ138000 knxd[4995]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 knxd[4995]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:25:51 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:25:51 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:25:51 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:25:51 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:51 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:25:51 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:25:52 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:52 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:52 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:25:53 IQ138000 wb-rules[4610]: INFO: all rule files are loaded
Oct 11 05:25:53 IQ138000 python3[1961]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:25:53 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:53 IQ138000 wb-gsm[5025]: mm_on: Waiting for modem to start
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:54 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:54 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:25:55 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:25:55 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 npm[3765]: [2025-10-11 05:25:56] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:25:56 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 npm[3765]: [2025-10-11 05:25:56] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:25:56 IQ138000 npm[3765]: [2025-10-11 05:25:56] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:25:56 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:25:57 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:25:57 IQ138000 npm[3765]: [2025-10-11 05:25:57] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:25:57 IQ138000 npm[3765]: [2025-10-11 05:25:57] info:         zh:zstack:znp: Serialport opened
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:25:57 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:25:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:58 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:58 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:59 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:59 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:25:59 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:25:59 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:25:59 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:25:59 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:26:00 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:26:00 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:26:00 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:26:00 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:26:00.295+00:00
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:26:00.295Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160540310,"cmd_timestamp_ms":1760160360310,"source":"schedule"}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160540310,"cmd_timestamp_ms":1760160360310,"source":"schedule"}
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:26:00.532+00:00
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:26:00.532Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: Currently 4 devices are joined.
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160540576,"cmd_timestamp_ms":1760160360576,"source":"schedule"}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160540576,"cmd_timestamp_ms":1760160360576,"source":"schedule"}
Oct 11 05:26:00 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:00 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:26:00.730+00:00
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:26:00.730Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160540750,"cmd_timestamp_ms":1760160360750,"source":"schedule"}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160540750,"cmd_timestamp_ms":1760160360750,"source":"schedule"}
Oct 11 05:26:00 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:26:00.936+00:00
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:26:00.936Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160540962,"cmd_timestamp_ms":1760160360962,"source":"schedule"}
Oct 11 05:26:00 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160540962,"cmd_timestamp_ms":1760160360962,"source":"schedule"}
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m: Connected to MQTT server
Oct 11 05:26:00 IQ138000 npm[3765]: [2025-10-11 05:26:00] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:26:01.150+00:00
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:26:01.150Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541175,"cmd_timestamp_ms":1760160361175,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541175,"cmd_timestamp_ms":1760160361175,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:26:01.311+00:00
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:26:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:26:01.311Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541329,"cmd_timestamp_ms":1760160361329,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541329,"cmd_timestamp_ms":1760160361329,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:26:01 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:26:01 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:26:01 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:26:01 IQ138000 wb-rules[4610]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:26:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:01 IQ138000 npm[3765]: [2025-10-11 05:26:01] info:         z2m: Started frontend on port 8282
Oct 11 05:26:01 IQ138000 npm[3765]: [2025-10-11 05:26:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:26:01 IQ138000 npm[3765]: [2025-10-11 05:26:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:26:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:01 IQ138000 npm[3765]: [2025-10-11 05:26:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:26:01.497+00:00
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:26:01 IQ138000 npm[3765]: [2025-10-11 05:26:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:26:01 IQ138000 npm[3765]: [2025-10-11 05:26:01] info:         z2m: Zigbee2MQTT started!
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:26:01.497Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:26:01 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:26:01 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541515,"cmd_timestamp_ms":1760160361515,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541515,"cmd_timestamp_ms":1760160361515,"source":"schedule"}
Oct 11 05:26:01 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:26:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:01 IQ138000 knxd[5163]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:26:01 IQ138000 knxd[5163]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:26:01 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:26:01 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:26:01 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:26:01 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:26:01.888+00:00
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:26:01.888Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541899,"cmd_timestamp_ms":1760160361899,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160541899,"cmd_timestamp_ms":1760160361899,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:26:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:26:01.943+00:00
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:26:01.943Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160541957,"cmd_timestamp_ms":1760160361957,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160541957,"cmd_timestamp_ms":1760160361957,"source":"schedule"}
Oct 11 05:26:01 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:26:01 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:26:02.109+00:00
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:26:02.109Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160542125,"cmd_timestamp_ms":1760160362125,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160542125,"cmd_timestamp_ms":1760160362125,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:26:02.305+00:00
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:26:02.305Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160542320,"cmd_timestamp_ms":1760160362320,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160542320,"cmd_timestamp_ms":1760160362320,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:26:02.489+00:00
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:26:02.489Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760160542500,"cmd_timestamp_ms":1760160362500,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760160542500,"cmd_timestamp_ms":1760160362500,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:26:02.667+00:00
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:26:02.667Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760160542680,"cmd_timestamp_ms":1760160362680,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760160542680,"cmd_timestamp_ms":1760160362680,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:26:02.871+00:00
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:26:02.871Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160542886,"cmd_timestamp_ms":1760160362886,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160542886,"cmd_timestamp_ms":1760160362886,"source":"schedule"}
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:26:02 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:26:02 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:26:03.068+00:00
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:26:03.068Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160543080,"cmd_timestamp_ms":1760160363080,"source":"schedule"}
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160543080,"cmd_timestamp_ms":1760160363080,"source":"schedule"}
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-watchdog[5240]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:26:03 IQ138000 wb-mqtt-serial[1666]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:26:03 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:26:03 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:26:04 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:26:04 IQ138000 wb-rules[4610]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:26:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:26:04 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:26:04 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:26:04 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:26:04 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:26:05 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:26:05 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:26:05 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:05 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:06 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:07 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:07 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:08 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:26:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 31 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:08 IQ138000 wb-mqtt-serial[1666]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:26:09 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:10 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:10 IQ138000 ModemManager[485]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:26:10 IQ138000 ModemManager[485]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:26:10 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:26:10 IQ138000 wb-mqtt-serial[1666]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:26:10 IQ138000 wb-mqtt-serial[1666]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:26:11 IQ138000 ModemManager[485]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:26:11 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:11 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:26:11 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:26:11 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:26:11 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:26:11 IQ138000 knxd[5375]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:26:11 IQ138000 knxd[5375]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:26:11 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:26:11 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:26:11 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:26:11 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:26:12 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:26:12 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:26:12 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:26:12 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:26:12 IQ138000 python3[1961]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:26:12 IQ138000 ModemManager[485]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7712] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7758] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7778] device (ttyUSB1): modem state 'enabling'
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7803] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7828] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7869] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7876] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:12 IQ138000 NetworkManager[406]: <info>  [1760160372.7907] manager: NetworkManager state is now CONNECTING
Oct 11 05:26:12 IQ138000 ModemManager[485]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:26:12 IQ138000 wb-mqtt-nm-helper[2051]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:26:12 IQ138000 ModemManager[485]: <info>  [modem0] power state updated: on
Oct 11 05:26:13 IQ138000 python3[1961]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:26:13 IQ138000 python3[1961]:    --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:26:13 IQ138000 python3[1961]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:26:13 IQ138000 python3[1961]:            |                model: A7602E-H
Oct 11 05:26:13 IQ138000 python3[1961]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:26:13 IQ138000 python3[1961]:            |            supported: gsm-umts
Oct 11 05:26:13 IQ138000 python3[1961]:            |              current: gsm-umts
Oct 11 05:26:13 IQ138000 python3[1961]:            |         equipment id: 860803062234204
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   System   |               device: wbc
Oct 11 05:26:13 IQ138000 python3[1961]:            |              drivers: option, rndis_host
Oct 11 05:26:13 IQ138000 python3[1961]:            |               plugin: simtech
Oct 11 05:26:13 IQ138000 python3[1961]:            |         primary port: ttyUSB1
Oct 11 05:26:13 IQ138000 python3[1961]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:26:13 IQ138000 python3[1961]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:26:13 IQ138000 python3[1961]:            |                state: enabling
Oct 11 05:26:13 IQ138000 python3[1961]:            |          power state: on
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:26:13 IQ138000 python3[1961]:            |              current: allowed: any; preferred: none
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   3GPP     |                 imei: 860803062234204
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:26:13 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:13 IQ138000 python3[1961]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:13 IQ138000 python3[1961]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:26:13 IQ138000 python3[1961]:            |                       slot 2: none
Oct 11 05:26:13 IQ138000 python3[1961]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:26:13 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:26:13 IQ138000 python3[1961]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:26:13 IQ138000 python3[1961]:  successfully requested primary SIM switch in modem
Oct 11 05:26:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:14 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:15 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:26:15 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:15 IQ138000 wb-rules[4610]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:26:15 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:26:15 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:26:15 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:26:15 IQ138000 lsyncd[5421]: 05:26:15 Normal: --- Startup ---
Oct 11 05:26:15 IQ138000 lsyncd[5421]: 05:26:15 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:26:15 IQ138000 lsyncd[5421]: messages
Oct 11 05:26:15 IQ138000 lsyncd[5421]: journal
Oct 11 05:26:15 IQ138000 lsyncd[5421]: iq_network_manager/iq_network_manager.log
Oct 11 05:26:15 IQ138000 lsyncd[5423]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:26:15 IQ138000 lsyncd[5422]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:26:15 IQ138000 lsyncd[5422]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:26:15 IQ138000 lsyncd[5421]: 05:26:15 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:26:15 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:26:15 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:26:16 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:26:17 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] simple connect started...
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:26:17 IQ138000 wb-rules[4610]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:26:17 IQ138000 NetworkManager[406]: <info>  [1760160377.5708] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:17 IQ138000 NetworkManager[406]: <info>  [1760160377.5721] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:26:17 IQ138000 NetworkManager[406]: <info>  [1760160377.5756] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:26:17 IQ138000 NetworkManager[406]: <info>  [1760160377.5778] ppp-manager: starting PPP connection
Oct 11 05:26:17 IQ138000 NetworkManager[406]: <info>  [1760160377.5932] ppp-manager: pppd started with pid 5442
Oct 11 05:26:17 IQ138000 pppd[5442]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:26:17 IQ138000 NetworkManager[5442]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: initializing
Oct 11 05:26:17 IQ138000 pppd[5442]: pppd 2.4.9 started by root, uid 0
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:26:17 IQ138000 pppd[5442]: Using interface ppp0
Oct 11 05:26:17 IQ138000 NetworkManager[5442]: Using interface ppp0
Oct 11 05:26:17 IQ138000 NetworkManager[5442]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:26:17 IQ138000 pppd[5442]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:26:17 IQ138000 NetworkManager[406]: <info>  [1760160377.6581] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:26:17 IQ138000 pppd[5442]: PAP authentication succeeded
Oct 11 05:26:17 IQ138000 NetworkManager[5442]: PAP authentication succeeded
Oct 11 05:26:17 IQ138000 NetworkManager[5442]: kernel does not support PPP filtering
Oct 11 05:26:17 IQ138000 pppd[5442]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:26:17 IQ138000 pppd[5442]: kernel does not support PPP filtering
Oct 11 05:26:17 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:26:17 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:26:17 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:26:17 IQ138000 ModemManager[485]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:26:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:18 IQ138000 pppd[5442]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:26:18 IQ138000 NetworkManager[5442]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:26:18 IQ138000 pppd[5442]: local  IP address 10.102.249.217
Oct 11 05:26:18 IQ138000 NetworkManager[5442]: local  IP address 10.102.249.217
Oct 11 05:26:18 IQ138000 NetworkManager[5442]: remote IP address 10.64.64.64
Oct 11 05:26:18 IQ138000 NetworkManager[5442]: primary   DNS address 172.23.10.130
Oct 11 05:26:18 IQ138000 NetworkManager[5442]: secondary DNS address 172.23.10.131
Oct 11 05:26:18 IQ138000 pppd[5442]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:26:18 IQ138000 pppd[5442]: remote IP address 10.64.64.64
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.2335] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:26:18 IQ138000 pppd[5442]: primary   DNS address 172.23.10.130
Oct 11 05:26:18 IQ138000 pppd[5442]: secondary DNS address 172.23.10.131
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.2419] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:26:18 IQ138000 pppd[5442]: nm-ppp-plugin: ip-up event
Oct 11 05:26:18 IQ138000 pppd[5442]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.2445] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.2493] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.2533] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:26:18 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:26:18 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.3065] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:18 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:26:18 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:26:18 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:26:18 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.3959] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.3972] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.3993] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.4025] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:26:18 IQ138000 NetworkManager[406]: <info>  [1760160378.4069] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:26:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:26:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:18 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:26:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:26:19 IQ138000 ntpd[1653]: Listen normally on 4 ppp0 10.102.249.217:123
Oct 11 05:26:19 IQ138000 ntpd[1653]: new interface(s) found: waking up resolver
Oct 11 05:26:19 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 31 coil(s) @ 5101 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:26:20 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:26:22 IQ138000 ntpd[1653]: Soliciting pool server 90.188.9.144
Oct 11 05:26:22 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:26:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:26:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:26:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:26:22 IQ138000 wb-mqtt-knx[2143]: INFO: knxd connected successfully
Oct 11 05:26:22 IQ138000 ntpd[1653]: Soliciting pool server 85.193.65.152
Oct 11 05:26:22 IQ138000 ntpd[1653]: Soliciting pool server 89.179.240.219
Oct 11 05:26:23 IQ138000 python3[1961]: Выполнение: mmcli -i any
Oct 11 05:26:23 IQ138000 python3[1961]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:26:23 IQ138000 python3[1961]:    -------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:23 IQ138000 python3[1961]:   -------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Properties |            active: yes
Oct 11 05:26:23 IQ138000 python3[1961]:              |              imsi: 250997340491874
Oct 11 05:26:23 IQ138000 python3[1961]:              |             iccid: 8970199210429593744
Oct 11 05:26:23 IQ138000 python3[1961]:              |       operator id: 25099
Oct 11 05:26:23 IQ138000 python3[1961]:              |     operator name: Beeline
Oct 11 05:26:23 IQ138000 python3[1961]: Выполнение: mmcli -m wbc
Oct 11 05:26:23 IQ138000 python3[1961]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:26:23 IQ138000 python3[1961]:    --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:26:23 IQ138000 python3[1961]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:26:23 IQ138000 python3[1961]:            |                model: A7602E-H
Oct 11 05:26:23 IQ138000 python3[1961]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:26:23 IQ138000 python3[1961]:            |            supported: gsm-umts
Oct 11 05:26:23 IQ138000 python3[1961]:            |              current: gsm-umts
Oct 11 05:26:23 IQ138000 python3[1961]:            |         equipment id: 860803062234204
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   System   |               device: wbc
Oct 11 05:26:23 IQ138000 python3[1961]:            |              drivers: option, rndis_host
Oct 11 05:26:23 IQ138000 python3[1961]:            |               plugin: simtech
Oct 11 05:26:23 IQ138000 python3[1961]:            |         primary port: ttyUSB1
Oct 11 05:26:23 IQ138000 python3[1961]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:26:23 IQ138000 python3[1961]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:26:23 IQ138000 python3[1961]:            |                state: connected
Oct 11 05:26:23 IQ138000 python3[1961]:            |          power state: on
Oct 11 05:26:23 IQ138000 python3[1961]:            |          access tech: lte
Oct 11 05:26:23 IQ138000 python3[1961]:            |       signal quality: 93% (recent)
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:26:23 IQ138000 python3[1961]:            |              current: allowed: any; preferred: none
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   3GPP     |                 imei: 860803062234204
Oct 11 05:26:23 IQ138000 python3[1961]:            |          operator id: 25099
Oct 11 05:26:23 IQ138000 python3[1961]:            |        operator name: beeline
Oct 11 05:26:23 IQ138000 python3[1961]:            |         registration: home
Oct 11 05:26:23 IQ138000 python3[1961]:            | packet service state: attached
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:23 IQ138000 python3[1961]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:26:23 IQ138000 python3[1961]:            |                       slot 2: none
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:26:23 IQ138000 python3[1961]: Current state: home
Oct 11 05:26:23 IQ138000 python3[1961]: SIM registered in the network.
Oct 11 05:26:23 IQ138000 python3[1961]: Выполнение: mmcli -m wbc
Oct 11 05:26:23 IQ138000 python3[1961]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:26:23 IQ138000 python3[1961]:    --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:26:23 IQ138000 python3[1961]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:26:23 IQ138000 python3[1961]:            |                model: A7602E-H
Oct 11 05:26:23 IQ138000 python3[1961]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:26:23 IQ138000 python3[1961]:            |            supported: gsm-umts
Oct 11 05:26:23 IQ138000 python3[1961]:            |              current: gsm-umts
Oct 11 05:26:23 IQ138000 python3[1961]:            |         equipment id: 860803062234204
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   System   |               device: wbc
Oct 11 05:26:23 IQ138000 python3[1961]:            |              drivers: option, rndis_host
Oct 11 05:26:23 IQ138000 python3[1961]:            |               plugin: simtech
Oct 11 05:26:23 IQ138000 python3[1961]:            |         primary port: ttyUSB1
Oct 11 05:26:23 IQ138000 python3[1961]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:26:23 IQ138000 python3[1961]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:26:23 IQ138000 python3[1961]:            |                state: connected
Oct 11 05:26:23 IQ138000 python3[1961]:            |          power state: on
Oct 11 05:26:23 IQ138000 python3[1961]:            |          access tech: lte
Oct 11 05:26:23 IQ138000 python3[1961]:            |       signal quality: 93% (recent)
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:26:23 IQ138000 python3[1961]:            |              current: allowed: any; preferred: none
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   3GPP     |                 imei: 860803062234204
Oct 11 05:26:23 IQ138000 python3[1961]:            |          operator id: 25099
Oct 11 05:26:23 IQ138000 python3[1961]:            |        operator name: beeline
Oct 11 05:26:23 IQ138000 python3[1961]:            |         registration: home
Oct 11 05:26:23 IQ138000 python3[1961]:            | packet service state: attached
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:23 IQ138000 python3[1961]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:26:23 IQ138000 python3[1961]:            |                       slot 2: none
Oct 11 05:26:23 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:26:23 IQ138000 python3[1961]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:23 IQ138000 python3[1961]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:26:23 IQ138000 python3[1961]:    -------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:23 IQ138000 python3[1961]:   -------------------------------
Oct 11 05:26:23 IQ138000 python3[1961]:   Properties |            active: yes
Oct 11 05:26:23 IQ138000 python3[1961]:              |              imsi: 250997340491874
Oct 11 05:26:23 IQ138000 python3[1961]:              |             iccid: 8970199210429593744
Oct 11 05:26:23 IQ138000 python3[1961]:              |       operator id: 25099
Oct 11 05:26:23 IQ138000 python3[1961]:              |     operator name: Beeline
Oct 11 05:26:23 IQ138000 ntpd[1653]: Soliciting pool server 109.173.104.200
Oct 11 05:26:23 IQ138000 ntpd[1653]: Soliciting pool server 89.109.251.28
Oct 11 05:26:23 IQ138000 ntpd[1653]: Soliciting pool server 46.0.193.97
Oct 11 05:26:23 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:24 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:24 IQ138000 ntpd[1653]: Soliciting pool server 195.39.248.4
Oct 11 05:26:24 IQ138000 ntpd[1653]: Soliciting pool server 109.195.84.246
Oct 11 05:26:24 IQ138000 ntpd[1653]: Soliciting pool server 89.169.135.41
Oct 11 05:26:24 IQ138000 ntpd[1653]: Soliciting pool server 83.243.68.157
Oct 11 05:26:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:25 IQ138000 ntpd[1653]: Soliciting pool server 92.255.126.4
Oct 11 05:26:25 IQ138000 ntpd[1653]: Soliciting pool server 2a02:6bf:f000:1:2::2
Oct 11 05:26:25 IQ138000 ntpd[1653]: Soliciting pool server 217.170.87.229
Oct 11 05:26:25 IQ138000 ntpd[1653]: Soliciting pool server 217.170.87.229
Oct 11 05:26:25 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:26 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:26 IQ138000 ntpd[1653]: Soliciting pool server 212.113.99.6
Oct 11 05:26:26 IQ138000 ntpd[1653]: Soliciting pool server 192.36.143.130
Oct 11 05:26:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:27 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:27 IQ138000 ntpd[1653]: Soliciting pool server 185.211.244.47
Oct 11 05:26:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:28 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:26:28 IQ138000 python3[1961]: Выполнение: mmcli -m wbc
Oct 11 05:26:28 IQ138000 ntpd[1653]: Soliciting pool server 92.255.126.11
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 05:26:29 IQ138000 python3[1961]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:26:29 IQ138000 python3[1961]:    --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:26:29 IQ138000 python3[1961]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:26:29 IQ138000 python3[1961]:            |                model: A7602E-H
Oct 11 05:26:29 IQ138000 python3[1961]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:26:29 IQ138000 python3[1961]:            |            supported: gsm-umts
Oct 11 05:26:29 IQ138000 python3[1961]:            |              current: gsm-umts
Oct 11 05:26:29 IQ138000 python3[1961]:            |         equipment id: 860803062234204
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   System   |               device: wbc
Oct 11 05:26:29 IQ138000 python3[1961]:            |              drivers: option, rndis_host
Oct 11 05:26:29 IQ138000 python3[1961]:            |               plugin: simtech
Oct 11 05:26:29 IQ138000 python3[1961]:            |         primary port: ttyUSB1
Oct 11 05:26:29 IQ138000 python3[1961]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:26:29 IQ138000 python3[1961]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:26:29 IQ138000 python3[1961]:            |                state: connected
Oct 11 05:26:29 IQ138000 python3[1961]:            |          power state: on
Oct 11 05:26:29 IQ138000 python3[1961]:            |          access tech: lte
Oct 11 05:26:29 IQ138000 python3[1961]:            |       signal quality: 93% (recent)
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:26:29 IQ138000 python3[1961]:            |              current: allowed: any; preferred: none
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   3GPP     |                 imei: 860803062234204
Oct 11 05:26:29 IQ138000 python3[1961]:            |          operator id: 25099
Oct 11 05:26:29 IQ138000 python3[1961]:            |        operator name: beeline
Oct 11 05:26:29 IQ138000 python3[1961]:            |         registration: home
Oct 11 05:26:29 IQ138000 python3[1961]:            | packet service state: attached
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:29 IQ138000 python3[1961]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:26:29 IQ138000 python3[1961]:            |                       slot 2: none
Oct 11 05:26:29 IQ138000 python3[1961]:   --------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:26:29 IQ138000 python3[1961]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:26:29 IQ138000 python3[1961]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:26:29 IQ138000 python3[1961]:    -------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:26:29 IQ138000 python3[1961]:   -------------------------------
Oct 11 05:26:29 IQ138000 python3[1961]:   Properties |            active: yes
Oct 11 05:26:29 IQ138000 python3[1961]:              |              imsi: 250997340491874
Oct 11 05:26:29 IQ138000 python3[1961]:              |             iccid: 8970199210429593744
Oct 11 05:26:29 IQ138000 python3[1961]:              |       operator id: 25099
Oct 11 05:26:29 IQ138000 python3[1961]:              |     operator name: Beeline
Oct 11 05:26:29 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:26:29 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:26:30 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:26:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:26:31 IQ138000 wb-mqtt-serial[1666]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
-- Boot ae969989bf744a58a90950662026244c --
Oct 11 05:28:03 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:28:03 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:28:03 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:28:03 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:28:03 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:28:03 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:28:03 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:28:03 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:28:03 IQ138000 kernel: Zone ranges:
Oct 11 05:28:03 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:28:03 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:28:03 IQ138000 kernel: Movable zone start for each node
Oct 11 05:28:03 IQ138000 kernel: Early memory node ranges
Oct 11 05:28:03 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:28:03 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:28:03 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:28:03 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:28:03 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:28:03 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:28:03 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:28:03 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:28:03 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:28:03 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:28:03 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:28:03 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:28:03 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:28:03 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:28:03 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:28:03 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:28:03 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:28:03 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:28:03 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:28:03 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:28:03 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:28:03 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:28:03 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:28:03 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:28:03 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:28:03 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:28:03 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:28:03 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:28:03 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:28:03 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:28:03 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:28:03 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:28:03 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:28:03 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:28:03 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:28:03 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:28:03 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:28:03 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:28:03 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:28:03 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:28:03 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:28:03 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:28:03 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:28:03 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:28:03 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:28:03 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:28:03 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:28:03 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:28:03 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:28:03 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:28:03 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:28:03 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:28:03 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:28:03 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:28:03 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:28:03 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:28:03 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:28:03 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:28:03 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:28:03 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:28:03 IQ138000 kernel: No ATAGs?
Oct 11 05:28:03 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:28:03 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:28:03 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:28:03 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:28:03 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:28:03 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:28:03 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:28:03 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:28:03 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:28:03 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:28:03 IQ138000 kernel: PTP clock support registered
Oct 11 05:28:03 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:28:03 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:28:03 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:28:03 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:28:03 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:28:03 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:28:03 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:28:03 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:28:03 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:28:03 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:28:03 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:28:03 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:28:03 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:28:03 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:28:03 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:28:03 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:28:03 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:28:03 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:28:03 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:28:03 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:28:03 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:28:03 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:28:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:28:03 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:28:03 IQ138000 kernel: brd: module loaded
Oct 11 05:28:03 IQ138000 kernel: loop: module loaded
Oct 11 05:28:03 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:28:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:28:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:28:03 IQ138000 kernel: CAN device driver interface
Oct 11 05:28:03 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:28:03 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:28:03 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:28:03 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:28:03 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:28:03 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:28:03 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:28:03 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:28:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:28:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:28:03 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:28:03 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:28:03 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:28:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:28:03 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:28:03 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:28:03 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:28:03 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:28:03 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:28:03 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:28:03 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:28:03 IQ138000 kernel: can: controller area network core
Oct 11 05:28:03 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:28:03 IQ138000 kernel: can: raw protocol
Oct 11 05:28:03 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:28:03 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:28:03 IQ138000 kernel: can: SAE J1939
Oct 11 05:28:03 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:28:03 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:28:03 IQ138000 kernel: registered taskstats version 1
Oct 11 05:28:03 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:28:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:28:03 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:28:03 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:28:03 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:28:03 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:28:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:28:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:28:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:27:59 UTC (1760160479)
Oct 11 05:28:03 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:28:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:28:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:28:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:28:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:28:03 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:28:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:28:03 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:28:03 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:28:03 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:28:03 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:28:03 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:28:03 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:28:03 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:28:03 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: random: fast init done
Oct 11 05:28:03 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:28:03 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:28:03 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:28:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:28:03 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:28:03 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:28:03 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:28:03 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:28:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:28:03 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:28:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:28:03 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:28:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:28:03 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:28:03 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:28:03 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:28:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:28:03 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:28:03 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:28:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:28:03 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:28:03 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:28:03 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:28:03 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:28:03 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:28:03 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:28:03 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:28:03 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:28:03 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:28:03 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:28:03 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:28:03 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:28:03 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:28:03 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:28:03 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:28:03 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:28:03 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:28:03 IQ138000 kernel: of_cfs_init
Oct 11 05:28:03 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:28:03 IQ138000 kernel: ALSA device list:
Oct 11 05:28:03 IQ138000 kernel:   No soundcards found.
Oct 11 05:28:03 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:28:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:28:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:28:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:28:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:28:03 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:28:03 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:28:03 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:28:03 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:28:03 IQ138000 kernel:   with arguments:
Oct 11 05:28:03 IQ138000 kernel:     /sbin/init
Oct 11 05:28:03 IQ138000 kernel:   with environment:
Oct 11 05:28:03 IQ138000 kernel:     HOME=/
Oct 11 05:28:03 IQ138000 kernel:     TERM=linux
Oct 11 05:28:03 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:28:03 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:28:03 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:28:03 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:28:03 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:28:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:28:03 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:28:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:28:03 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:28:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:28:03 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:28:03 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:28:03 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:28:03 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:28:03 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:28:03 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:28:03 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:28:03 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:28:03 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:28:03 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:28:03 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:28:03 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:28:03 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:28:03 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:28:03 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:28:03 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:28:03 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:28:03 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:28:03 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:28:03 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:28:03 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:28:03 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:28:03 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:28:03 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:28:03 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:28:03 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:28:03 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:28:03 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:28:03 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:28:03 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:28:03 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:28:03 IQ138000 systemd-journald[138]: Journal started
Oct 11 05:28:03 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:28:03 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:28:03 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:28:03 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:28:03 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:28:03 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:28:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:28:03 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:28:03 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:28:04 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:28:04 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:28:04 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:28:04 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:28:04 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:28:04 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:28:04 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:28:04 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:28:04 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:28:04 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:28:04 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:28:04 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:28:04 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:28:04 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:28:04 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:28:04 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:28:04 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:28:05 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 05:28:05 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:28:05 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:28:05 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:28:05 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:28:05 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:28:05 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:28:05 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:28:05 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:28:05 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:28:05 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:28:05 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:28:05 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:28:05 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:28:05 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:28:05 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 05:28:05 IQ138000 systemd-udevd[166]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:28:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:28:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:28:05 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:28:05 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:28:06 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:28:06 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:28:06 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:28:06 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:28:06 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:28:06 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:28:06 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:28:06 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:28:06 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:28:06 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:28:06 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:28:06 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:28:06 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:28:06 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:28:06 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:28:06 IQ138000 systemd-fsck[207]: data: recovering journal
Oct 11 05:28:06 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:28:06 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:28:06 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:28:06 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:28:06 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:28:06 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:28:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:28:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:28:06 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:28:06 IQ138000 systemd-fsck[207]: data: clean, 16455/328656 files, 369783/1313536 blocks
Oct 11 05:28:06 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 05:28:06 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 05:28:06 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:28:06 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:28:06 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:28:06 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:28:06 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:28:06 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:28:06 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:28:06 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:28:06 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:28:06 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:28:06 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:28:06 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.989ms for 461 entries.
Oct 11 05:28:06 IQ138000 systemd-journald[138]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 05:28:06 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:28:07 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 05:28:07 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:28:07 IQ138000 kernel: random: crng init done
Oct 11 05:28:07 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:28:07 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:28:07 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:28:07 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:28:07 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:28:07 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:28:07 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:28:07 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:28:07 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:28:07 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:28:08 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:28:08 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:28:08 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:28:08 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:28:08 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:28:08 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:28:08 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:28:08 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:28:08 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:28:08 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:28:08 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:28:08 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:28:08 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:28:08 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:28:08 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:28:08 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:28:08 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:28:08 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:28:08 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:28:08 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:28:08 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:28:08 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 05:28:08 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:28:08 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:28:08 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:28:08 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:28:08 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 05:28:08 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:28:08 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:28:08 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:28:08 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:28:08 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:28:08 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 05:28:08 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:28:08 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:28:08 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:28:08 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 05:28:08 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:28:08 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:28:08 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:28:08 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:28:08 IQ138000 migrate.sh[326]: Error: No such file or directory
Oct 11 05:28:08 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:28:08 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:28:08 IQ138000 migrate.sh[342]: Error: No such file or directory
Oct 11 05:28:08 IQ138000 rules-preprocessor[339]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:28:08 IQ138000 rules-preprocessor[339]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:28:08 IQ138000 reverse-ssh.sh[344]: Error: No such file or directory
Oct 11 05:28:09 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:28:09 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:28:09 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:28:09 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:28:09 IQ138000 migrate.sh[354]: Error: No such file or directory
Oct 11 05:28:09 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:28:09 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:28:09 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:28:09 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:28:09 IQ138000 migrate.sh[364]: Error: No such file or directory
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Successfully dropped root privileges.
Oct 11 05:28:09 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: avahi-daemon 0.8 starting up.
Oct 11 05:28:09 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Successfully called chroot().
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Successfully dropped remaining capabilities.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: No service file found in /etc/avahi/services.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:28:09 IQ138000 wb-watch-configs[383]: Watched dirs: /etc /etc/network
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Network interface enumeration completed.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Registering new address record for ::1 on lo.*.
Oct 11 05:28:09 IQ138000 avahi-daemon[366]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:28:09 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:28:09 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:28:09 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:28:09 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:28:09 IQ138000 migrate.sh[386]: Error: No such file or directory
Oct 11 05:28:09 IQ138000 wpa_supplicant[384]: Successfully initialized wpa_supplicant
Oct 11 05:28:09 IQ138000 systemd-logind[346]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:28:09 IQ138000 systemd-logind[346]: New seat seat0.
Oct 11 05:28:09 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:28:09 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:28:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:28:09 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:28:09 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:28:09 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:09 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:28:09 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:28:09 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:28:09 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:28:09 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:28:09 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:09 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:28:09 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:28:09 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:28:09 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:28:09 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:28:09 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:28:09 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:28:09 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:28:09 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.0149] NetworkManager (version 1.42.4) is starting... (boot:ae969989-bf74-4a58-a909-50662026244c)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.0154] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:28:10 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:28:10 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.0318] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:28:10 IQ138000 monit[321]: Starting daemon monitor: monit.
Oct 11 05:28:10 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.0781] manager[0x706900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:28:10 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:28:10 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:28:10 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:28:10 IQ138000 avahi-daemon[366]: Server startup complete. Host name is IQ138000.local. Local service cookie is 426802982.
Oct 11 05:28:10 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:28:10 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:28:10 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:28:10 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:28:10 IQ138000 ModemManager[471]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:28:10 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:28:10 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.6804] hostname: hostname: using hostnamed
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.6807] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.6841] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.6941] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.6960] manager[0x706900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.6962] manager[0x706900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7229] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7387] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7435] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:28:10 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7673] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7734] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7754] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7760] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7764] manager: Networking is enabled by state file
Oct 11 05:28:10 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7831] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7843] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7852] ifupdown: management mode: unmanaged
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7854] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.7856] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:28:10 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.8591] dhcp: init: Using DHCP client 'internal'
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.8613] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.8878] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:28:10 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:28:10 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.9076] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.9196] device (lo): Activation: starting connection 'lo' (abf97de8-3ab1-4750-82b1-ac01d4e18e06)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.9383] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:28:10 IQ138000 NetworkManager[406]: <info>  [1760160490.9472] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.3051] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.3131] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.3178] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.3254] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:28:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:28:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:28:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:28:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.5364] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.5560] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.5641] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:28:11 IQ138000 NetworkManager[406]: <info>  [1760160491.5666] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:11 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:28:12 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.3363] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.3429] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.3477] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.3948] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.3967] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.4031] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.4084] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.4508] modem-manager: ModemManager available
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.4511] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.4526] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.4640] device (lo): Activation: successful, device activated.
Oct 11 05:28:12 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8117] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8124] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8144] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8161] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8301] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8317] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8370] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8438] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8576] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8761] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8852] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:28:12 IQ138000 NetworkManager[406]: <info>  [1760160492.8929] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:13 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:28:13 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:28:13 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:28:16 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:28:16 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:28:16 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 05:28:16 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:16 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:28:16 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:28:16 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:28:16 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 05:28:16 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:16 IQ138000 init.sh[1320]: ...
Oct 11 05:28:16 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 05:28:16 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:17 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:28:17 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:28:17 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:28:17 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 05:28:17 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:17 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:28:17 IQ138000 init.sh[1320]: ...
Oct 11 05:28:17 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 05:28:17 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:18 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:28:18 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:28:18 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:28:18 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 05:28:18 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:18 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:28:18 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 05:28:18 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:28:18 IQ138000 init.sh[1320]: ...
Oct 11 05:28:18 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:28:18 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:28:18 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:28:18 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:28:18 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:28:19 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:28:19 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:28:19 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:28:19 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:28:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:28:19 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:28:19 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:28:19 IQ138000 lsyncd[1607]: 05:28:19 Normal: --- Startup ---
Oct 11 05:28:19 IQ138000 lsyncd[1607]: 05:28:19 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:28:19 IQ138000 lsyncd[1607]: iq_network_manager/iq_network_manager.log
Oct 11 05:28:19 IQ138000 lsyncd[1607]: messages
Oct 11 05:28:19 IQ138000 lsyncd[1607]: journal
Oct 11 05:28:19 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:28:19 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:28:19 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:28:19 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:28:19 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:28:19 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:28:19 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:28:19 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:28:19 IQ138000 ntpd[1617]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:28:19 IQ138000 ntpd[1617]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:28:19 IQ138000 ntpd[1617]: ----------------------------------------------------
Oct 11 05:28:19 IQ138000 ntpd[1617]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:28:19 IQ138000 ntpd[1617]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:28:19 IQ138000 ntpd[1617]: corporation.  Support and training for ntp-4 are
Oct 11 05:28:19 IQ138000 persist_meter_data.sh[1636]: Error: No such file or directory
Oct 11 05:28:19 IQ138000 ntpd[1617]: available at https://www.nwtime.org/support
Oct 11 05:28:19 IQ138000 ntpd[1617]: ----------------------------------------------------
Oct 11 05:28:19 IQ138000 lsyncd[1628]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:28:19 IQ138000 lsyncd[1618]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:28:19 IQ138000 lsyncd[1618]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 05:28:19 IQ138000 lsyncd[1607]: 05:28:19 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:28:19 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:28:19 IQ138000 ntpd[1644]: proto: precision = 1.000 usec (-20)
Oct 11 05:28:19 IQ138000 ntpd[1644]: basedate set to 2020-09-11
Oct 11 05:28:19 IQ138000 ntpd[1644]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:28:19 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:28:19 IQ138000 ntpd[1644]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:28:19 IQ138000 ntpd[1644]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:28:19 IQ138000 ntpd[1644]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:28:19 IQ138000 ntpd[1644]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:28:19 IQ138000 ntpd[1644]: Listen normally on 3 lo [::1]:123
Oct 11 05:28:19 IQ138000 ntpd[1644]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:28:19 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:28:19 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:28:19 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:28:19 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:28:19 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:28:19 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:28:19 IQ138000 wb-mqtt-w1[1670]: MQTT broker localhost:1883
Oct 11 05:28:19 IQ138000 wb-mqtt-w1[1670]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:19 IQ138000 wb-mqtt-w1[1670]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:28:20 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 05:28:20 IQ138000 wb-mqtt-w1[1670]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:28:20 IQ138000 wb-mqtt-w1[1670]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:28:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:28:20 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:28:20 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:28:20 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:28:20 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:28:20 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:28:20 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:28:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:28:20 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:28:20 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:28:20 IQ138000 wb-knxd-config.sh[1517]: No /dev/ttyKNX found, disabling level2
Oct 11 05:28:20 IQ138000 wb-knxd-config.sh[1517]: Restart knxd
Oct 11 05:28:20 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:28:20 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:20 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:28:20 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:28:20 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:28:20 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:28:20 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:28:20 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:28:20 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:28:20 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:28:20 IQ138000 sshd[1724]: Server listening on 0.0.0.0 port 22.
Oct 11 05:28:20 IQ138000 sshd[1724]: Server listening on :: port 22.
Oct 11 05:28:20 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:28:20 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:28:20 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:28:20 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:28:20 IQ138000 ntpd[1644]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:28:20 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:28:20 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:28:20 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:20 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:28:20 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:28:20 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:28:20 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:28:20 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:28:20 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:28:20 IQ138000 vnstatd[1645]: Info: vnStat daemon 2.6 started. (pid:1645 uid:110 gid:117 64-bit)
Oct 11 05:28:20 IQ138000 vnstatd[1645]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:28:20 IQ138000 vnstatd[1645]: Info: Interface "ppp0" disabled.
Oct 11 05:28:20 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:28:21 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:28:21 IQ138000 knxd[1819]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:28:21 IQ138000 knxd[1819]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:28:21 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:28:21 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:28:21 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:28:21 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:28:21 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:28:21 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:28:21 IQ138000 reverse-ssh.sh[1855]: Error: No such file or directory
Oct 11 05:28:21 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:28:21 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:21 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:28:21 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:21 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:28:21 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:28:21 IQ138000 wpa_supplicant[384]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:28:21 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:28:21 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:21 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:28:21 IQ138000 ntpd[1644]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:28:21 IQ138000 NetworkManager[406]: <error> [1760160501.6723] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:28:21 IQ138000 NetworkManager[406]: <info>  [1760160501.6726] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:28:21 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:28:21 IQ138000 wb-adjust-systime[1850]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:28:21 IQ138000 wb-adjust-systime[1850]: Drift file is valid (was recently edited)
Oct 11 05:28:21 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:28:21 IQ138000 mosquitto[1898]: 1760160501: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:28:21 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:28:21 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:28:21 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:28:22 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:28:22 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:28:22 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:28:22 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:28:22 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: MQTT broker localhost:1883
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:22 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4066] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4073] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4080] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4103] manager: NetworkManager state is now CONNECTING
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: INFO: [sqlite] Create indices if necessary
Oct 11 05:28:22 IQ138000 wb-mqtt-db[1964]: INFO: [sqlite] Analyzing data table
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4186] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4653] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.4662] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:22 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.5623] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:22 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.5921] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.5941] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:28:22 IQ138000 wb-mqtt-knx[1977]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:22 IQ138000 wb-mqtt-knx[1977]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.6153] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.6161] Config: added 'scan_ssid' value '1'
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.6323] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.6326] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.6328] Config: added 'psk' value '<hidden>'
Oct 11 05:28:22 IQ138000 ntpd[1644]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:28:22 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:28:22 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:28:22 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.9287] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:28:22 IQ138000 NetworkManager[406]: <info>  [1760160502.9290] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:28:23 IQ138000 wb-mqtt-logs[1984]: MQTT broker localhost:1883
Oct 11 05:28:23 IQ138000 wb-mqtt-logs[1984]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:23 IQ138000 wb-mqtt-logs[1984]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:23 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:28:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:28:23 IQ138000 wb-mqtt-confed[1957]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:28:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.636s CPU time.
Oct 11 05:28:23 IQ138000 wb-mqtt-confed[1957]: INFO: [wbgo_mqtt] confed-IQ138000-1957: MQTT connection established
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:23 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:28:23 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:28:23 IQ138000 ntpd[1644]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:28:23 IQ138000 wb-mqtt-iec104[1969]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:28:23 IQ138000 wb-mqtt-opcua[2011]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:28:24 IQ138000 wb-mqtt-opcua[2011]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:28:24 IQ138000 wb-mqtt-opcua[2011]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:28:24 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:28:24 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:28:24 IQ138000 wb-mqtt-iec104[2141]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:28:24 IQ138000 wb-mqtt-opcua[2152]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [gpio driver] Started
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:28:24 IQ138000 wb-mqtt-gpio[1869]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:28:25 IQ138000 wb-mqtt-mbgate[1992]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:28:25 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:28:25 IQ138000 wb-mqtt-opcua[2152]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:28:25 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:28:25 IQ138000 wb-mqtt-iec104[2141]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:28:25 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:28:25 IQ138000 wb-mqtt-logs[1984]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:25 IQ138000 wb-mqtt-logs[1984]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:25 IQ138000 wb-mqtt-logs[1984]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:25 IQ138000 wb-mqtt-logs[1984]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:28:25 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:25 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:28:25 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:28:25 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:28:25 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:28:25 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:28:26 IQ138000 wb-mqtt-knx[1977]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:26 IQ138000 wb-mqtt-knx[1977]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:26 IQ138000 wb-mqtt-knx[1977]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:26 IQ138000 wb-mqtt-knx[1977]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:28:26 IQ138000 wb-mqtt-knx[1977]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:28:27 IQ138000 python3[1937]: No data file found at /tmp/network_status_cache.json
Oct 11 05:28:27 IQ138000 python3[1937]: Connecting to MQTT
Oct 11 05:28:27 IQ138000 python3[1937]: Connected to MQTT
Oct 11 05:28:27 IQ138000 python3[1937]: Connection returned result: Connection Accepted.
Oct 11 05:28:28 IQ138000 NetworkManager[406]: <info>  [1760160508.0685] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:28:28 IQ138000 NetworkManager[406]: <info>  [1760160508.0698] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:28:28 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2005 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New virtual device lo abf97de8-3ab1-4750-82b1-ac01d4e18e06 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:28:29 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:New active connection lo abf97de8-3ab1-4750-82b1-ac01d4e18e06 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:28:29 IQ138000 wb-device-manager[1944]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:28:29 IQ138000 wb-device-manager[1944]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:28:30 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:30 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:31 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:28:31 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:28:31 IQ138000 kernel: dldo4: disabling
Oct 11 05:28:31 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:28:31 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:28:31 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:28:31 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:31 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:28:31 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:28:31 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:28:31 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:28:31 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:28:31 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:28:31 IQ138000 knxd[3042]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:28:32 IQ138000 knxd[3042]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:28:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:28:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: MQTT broker localhost:1883
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:28:32 IQ138000 wb-mqtt-adc[3065]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:28:32 IQ138000 wb-mqtt-confed[1957]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:28:33 IQ138000 wb-mqtt-db[1964]: INFO: [sqlite] DB initialization is done
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:28:33 IQ138000 wb-mqtt-serial[1658]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:28:34 IQ138000 wb-gsm[3352]: main: Called from pid 1 (systemd)
Oct 11 05:28:34 IQ138000 wb-gsm[3389]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:28:35 IQ138000 wb-usb-otg-start.sh[3435]: : wb-usb-otg-start
Oct 11 05:28:35 IQ138000 wb-usb-otg-start.sh[3435]: main: setup_device()
Oct 11 05:28:35 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:28:35 IQ138000 wb-gsm[3452]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:28:35 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:28:35 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:28:35 IQ138000 kernel: using random self ethernet address
Oct 11 05:28:35 IQ138000 kernel: using random host ethernet address
Oct 11 05:28:35 IQ138000 wb-usb-otg-start.sh[3435]: main: enabling profile rndis
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:28:35 IQ138000 systemd-udevd[3428]: Using default interface naming scheme 'v247'.
Oct 11 05:28:35 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:28:35 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:28:35 IQ138000 NetworkManager[406]: <info>  [1760160515.4203] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:28:35 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:28:35 IQ138000 NetworkManager[406]: <info>  [1760160515.6516] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:28:35 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 05:28:35 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:28:35 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:28:36 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:28:36 IQ138000 NetworkManager[406]: <info>  [1760160516.7144] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:28:36 IQ138000 NetworkManager[406]: <info>  [1760160516.7146] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:28:36 IQ138000 wb-gsm[3576]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:28:36 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:28:37 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: DB logger started, go to main loop
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:28:37 IQ138000 wb-gsm[3591]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:28:37 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:28:37 IQ138000 python3[1937]: Выполнение: service wb-connection-manager stop
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:28:37 IQ138000 wb-gsm[3614]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:28:37 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:28:37 IQ138000 wb-mqtt-db[1964]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:28:38 IQ138000 npm[1673]: > zigbee2mqtt@2.1.1 start
Oct 11 05:28:38 IQ138000 npm[1673]: > node index.js
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:28:38 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:28:38 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:28:39 IQ138000 wb-mqtt-serial[1658]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:40 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:28:40 IQ138000 npm[3665]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:28:41 IQ138000 wb-gsm[3997]: mm_off: Modem is already OFF
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:41 IQ138000 wb-gsm[4067]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 05:28:41 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:42 IQ138000 wb-gsm[4078]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:28:42 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:42 IQ138000 wb-gsm[4101]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:28:42 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:42 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:42 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:42 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:28:43 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:44 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:28:44 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:44 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:44 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:28:44 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:44 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:44 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:44 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:28:44 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:28:44 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:28:44 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:28:44 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:28:44 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:28:44 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:28:44 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:28:44 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:44 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:28:44 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:28:44 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:44 IQ138000 wb-mqtt-w1[4355]: MQTT broker localhost:1883
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:28:44 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:28:44 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:28:44 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:28:44 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:28:44 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:28:44 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:28:44 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:28:45 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:28:45 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:28:45 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:28:45 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:28:45 IQ138000 wb-mqtt-w1[4355]: INFO: w1 thread Started
Oct 11 05:28:45 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:28:45 IQ138000 wb-mqtt-w1[4355]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:28:45 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:28:45 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:28:45 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.151s CPU time.
Oct 11 05:28:45 IQ138000 python3[1937]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:28:45 IQ138000 python3[1937]:  
Oct 11 05:28:45 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:45 IQ138000 knxd[4342]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:28:45 IQ138000 knxd[4342]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:28:45 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:28:45 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:45 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:28:45 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:28:45 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:45 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:45 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:28:46 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:47 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:28:47 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:28:47 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <warn>  [1760160527.5313] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <info>  [1760160527.5315] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <info>  [1760160527.5337] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <warn>  [1760160527.5359] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <info>  [1760160527.5392] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:28:47 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:28:47 IQ138000 wb-mqtt-nm-helper[2005]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <info>  [1760160527.5651] manager: startup complete
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <info>  [1760160527.5724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:28:47 IQ138000 NetworkManager[406]: <info>  [1760160527.5726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:28:47 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:28:47 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:28:47 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:28:47 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:28:47 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:28:48 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:48 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:28:48 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:28:48 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:28:48 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:49 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:28:49 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:28:49 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:28:49 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:28:49 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:28:49 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:28:50 IQ138000 python3[1937]: Выполнение: mmcli -m wbc
Oct 11 05:28:50 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:50 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:28:50 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:28:50 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:28:50 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:28:50 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:28:50 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:28:50 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:28:50 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:28:50 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:28:50 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:28:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:28:50 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:28:50 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:28:50 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:28:50 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:28:50 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:28:50 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:28:50 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:28:50 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:28:50 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:28:50 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:28:50 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:28:50 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:28:50 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:28:51 IQ138000 watchdog[4624]: starting daemon (5.16):
Oct 11 05:28:51 IQ138000 watchdog[4624]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:28:51 IQ138000 watchdog[4624]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:28:51 IQ138000 watchdog[4624]:  ping: no machine to check
Oct 11 05:28:51 IQ138000 watchdog[4624]:  file: no file to check
Oct 11 05:28:51 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:28:51 IQ138000 watchdog[4624]:  pidfile: /var/run/sshd.pid
Oct 11 05:28:51 IQ138000 watchdog[4624]:  interface: no interface to check
Oct 11 05:28:51 IQ138000 watchdog[4624]:  temperature: no sensors to check
Oct 11 05:28:51 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:28:51 IQ138000 watchdog[4624]:  no test binary files
Oct 11 05:28:51 IQ138000 watchdog[4624]:  no repair binary files
Oct 11 05:28:51 IQ138000 watchdog[4624]:  error retry time-out = 30 seconds
Oct 11 05:28:51 IQ138000 watchdog[4624]:  repair attempts = 1
Oct 11 05:28:51 IQ138000 watchdog[4624]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:28:51 IQ138000 watchdog[4624]: watchdog now set to 120 seconds
Oct 11 05:28:51 IQ138000 watchdog[4624]: hardware watchdog identity: WBEC WDT
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:51 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:28:51 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:28:51 IQ138000 systemd[1]: Startup finished in 3.800s (kernel) + 49.808s (userspace) = 53.608s.
Oct 11 05:28:51 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: driver is created
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: driver loop is started
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: wait for driver to become ready
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: driver is ready
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] rules-IQ138000-4608: MQTT connection established
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4608: MQTT connection established
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: [engine] Starting main loop
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: the engine is ready
Oct 11 05:28:51 IQ138000 wb-rules[4608]: INFO: [engine] Starting sync loop
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:51 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 9 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-rules[4608]: WARNING: [rule warning] DAC: no config file
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:52 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:28:53 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:53 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:54 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:54 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:54 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:28:54 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:28:54 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:55 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:28:55 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:55 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:28:55 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:28:55 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:28:55 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:28:55 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:28:55 IQ138000 knxd[4972]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:28:55 IQ138000 knxd[4972]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:28:55 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:28:55 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:28:55 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:28:55 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:28:55 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:28:55 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:28:55 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:28:55 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:28:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:28:55 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:28:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:28:55 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 8e:9f:5b:39:c1:e7
Oct 11 05:28:55 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:28:55 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:28:55 IQ138000 NetworkManager[406]: <info>  [1760160535.6713] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:28:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:28:55 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:28:55 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:28:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:28:55 IQ138000 systemd-udevd[4977]: Using default interface naming scheme 'v247'.
Oct 11 05:28:55 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:28:55 IQ138000 systemd-udevd[4977]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:28:55 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:55 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-rules[4608]: INFO: all rule files are loaded
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:56 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 python3[1937]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:28:57 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:28:58 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:58 IQ138000 wb-gsm[5041]: mm_on: Waiting for modem to start
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:58 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:28:59 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:28:59 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 9 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:29:00 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:29:01 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 npm[3665]: [2025-10-11 05:29:01] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:29:01 IQ138000 npm[3665]: [2025-10-11 05:29:01] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:29:01 IQ138000 npm[3665]: [2025-10-11 05:29:01] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:29:01 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:29:02 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:29:02 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:29:03 IQ138000 npm[3665]: [2025-10-11 05:29:03] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:29:03 IQ138000 npm[3665]: [2025-10-11 05:29:03] info:         zh:zstack:znp: Serialport opened
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:29:03.250+00:00
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:29:03 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:29:03.250Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160723266,"cmd_timestamp_ms":1760160543266,"source":"schedule"}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160723266,"cmd_timestamp_ms":1760160543266,"source":"schedule"}
Oct 11 05:29:03 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:29:03.487+00:00
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:29:03.487Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160723500,"cmd_timestamp_ms":1760160543500,"source":"schedule"}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760160723500,"cmd_timestamp_ms":1760160543500,"source":"schedule"}
Oct 11 05:29:03 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:29:03.698+00:00
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:29:03.698Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160723717,"cmd_timestamp_ms":1760160543717,"source":"schedule"}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160723717,"cmd_timestamp_ms":1760160543717,"source":"schedule"}
Oct 11 05:29:03 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:03 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:03 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:29:03.893+00:00
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:29:03.893Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160723903,"cmd_timestamp_ms":1760160543903,"source":"schedule"}
Oct 11 05:29:03 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160723903,"cmd_timestamp_ms":1760160543903,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:29:04.062+00:00
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:29:04.062Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724076,"cmd_timestamp_ms":1760160544076,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724076,"cmd_timestamp_ms":1760160544076,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:29:04.185+00:00
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:29:04.185Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724196,"cmd_timestamp_ms":1760160544196,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724196,"cmd_timestamp_ms":1760160544196,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:29:04 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:29:04 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:29:04.419+00:00
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:29:04.419Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724430,"cmd_timestamp_ms":1760160544430,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724430,"cmd_timestamp_ms":1760160544430,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:29:04.664+00:00
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:29:04.664Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724685,"cmd_timestamp_ms":1760160544685,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760160724685,"cmd_timestamp_ms":1760160544685,"source":"schedule"}
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:29:04 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:04 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:29:05 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:29:05 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:29:05.122+00:00
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:29:05 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:29:05.122Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160725134,"cmd_timestamp_ms":1760160545134,"source":"schedule"}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160725134,"cmd_timestamp_ms":1760160545134,"source":"schedule"}
Oct 11 05:29:05 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:29:05 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:29:05.352+00:00
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:29:05.352Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160725372,"cmd_timestamp_ms":1760160545372,"source":"schedule"}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160725372,"cmd_timestamp_ms":1760160545372,"source":"schedule"}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:29:05 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:29:05 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:29:05 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:29:05 IQ138000 knxd[5187]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:29:05 IQ138000 knxd[5187]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:29:05 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:29:05 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:29:05 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:29:05.694+00:00
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:29:05.694Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160725712,"cmd_timestamp_ms":1760160545712,"source":"schedule"}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760160725712,"cmd_timestamp_ms":1760160545712,"source":"schedule"}
Oct 11 05:29:05 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:29:05 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:29:05 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:29:06.084+00:00
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:29:06.084Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760160726102,"cmd_timestamp_ms":1760160546102,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760160726102,"cmd_timestamp_ms":1760160546102,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: Currently 4 devices are joined.
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:29:06.330+00:00
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:29:06.330Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760160726343,"cmd_timestamp_ms":1760160546343,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760160726343,"cmd_timestamp_ms":1760160546343,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:29:06.501+00:00
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:29:06.501Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160726512,"cmd_timestamp_ms":1760160546512,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160726512,"cmd_timestamp_ms":1760160546512,"source":"schedule"}
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m: Connected to MQTT server
Oct 11 05:29:06 IQ138000 npm[3665]: [2025-10-11 05:29:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:29:06.694+00:00
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:29:06.694Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160726723,"cmd_timestamp_ms":1760160546723,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760160726723,"cmd_timestamp_ms":1760160546723,"source":"schedule"}
Oct 11 05:29:06 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:06 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:06 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:29:07 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:29:07 IQ138000 wb-rules[4608]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:29:07 IQ138000 npm[3665]: [2025-10-11 05:29:07] info:         z2m: Started frontend on port 8282
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 npm[3665]: [2025-10-11 05:29:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:29:07 IQ138000 npm[3665]: [2025-10-11 05:29:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:29:07 IQ138000 npm[3665]: [2025-10-11 05:29:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:29:07 IQ138000 npm[3665]: [2025-10-11 05:29:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:29:07 IQ138000 npm[3665]: [2025-10-11 05:29:07] info:         z2m: Zigbee2MQTT started!
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:29:07 IQ138000 wb-rules[4608]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:07 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:08 IQ138000 wb-watchdog[5282]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:29:08 IQ138000 wb-mqtt-serial[1658]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:29:09 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:09 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:29:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:29:09 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:29:09 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:29:09 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:29:09 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:29:10 IQ138000 python3[1937]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:29:10 IQ138000 wb-mqtt-serial[1658]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
-- Boot d55c14b38f744fb49e51ad5dad297a7b --
Oct 11 05:34:10 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:34:10 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:34:10 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:34:10 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:34:10 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:34:10 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:34:10 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:34:10 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:34:10 IQ138000 kernel: Zone ranges:
Oct 11 05:34:10 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:34:10 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:34:10 IQ138000 kernel: Movable zone start for each node
Oct 11 05:34:10 IQ138000 kernel: Early memory node ranges
Oct 11 05:34:10 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:34:10 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:34:10 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:34:10 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:34:10 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:34:10 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:34:10 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:34:10 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:34:10 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:34:10 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:34:10 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:34:10 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:34:10 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:34:10 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:34:10 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:34:10 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:34:10 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:34:10 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:34:10 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:34:10 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:34:10 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:34:10 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:34:10 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:34:10 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:34:10 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:34:10 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:34:10 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:34:10 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:34:10 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:34:10 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:34:10 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:34:10 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:34:10 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:34:10 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:34:10 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:34:10 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:34:10 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:34:10 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:34:10 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:34:10 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:34:10 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:34:10 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:34:10 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:34:10 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:34:10 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:34:10 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:34:10 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:34:10 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:34:10 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:34:10 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:34:10 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:34:10 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:34:10 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:34:10 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:34:10 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:34:10 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:34:10 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:34:10 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:34:10 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:34:10 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:34:10 IQ138000 kernel: No ATAGs?
Oct 11 05:34:10 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:34:10 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:34:10 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:34:10 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:34:10 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:34:10 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:34:10 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:34:10 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:34:10 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:34:10 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:34:10 IQ138000 kernel: PTP clock support registered
Oct 11 05:34:10 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:34:10 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:34:10 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:34:10 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:34:10 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:34:10 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:34:10 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:34:10 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:34:10 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:34:10 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:34:10 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:34:10 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:34:10 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:34:10 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:34:10 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:34:10 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:34:10 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:34:10 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:34:10 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:34:10 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:34:10 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:34:10 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:34:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:34:10 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:34:10 IQ138000 kernel: brd: module loaded
Oct 11 05:34:10 IQ138000 kernel: loop: module loaded
Oct 11 05:34:10 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:34:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:34:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:34:10 IQ138000 kernel: CAN device driver interface
Oct 11 05:34:10 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:34:10 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:34:10 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:34:10 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:34:10 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:34:10 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:34:10 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:34:10 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:34:10 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:34:10 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:34:10 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:34:10 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:34:10 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:34:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:34:10 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:34:10 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:34:10 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:34:10 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:34:10 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:34:10 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:34:10 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:34:10 IQ138000 kernel: can: controller area network core
Oct 11 05:34:10 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:34:10 IQ138000 kernel: can: raw protocol
Oct 11 05:34:10 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:34:10 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:34:10 IQ138000 kernel: can: SAE J1939
Oct 11 05:34:10 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:34:10 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:34:10 IQ138000 kernel: registered taskstats version 1
Oct 11 05:34:10 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:34:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:34:10 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:34:10 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:34:10 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:34:10 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:34:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:34:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:34:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:34:06 UTC (1760160846)
Oct 11 05:34:10 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:34:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:34:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:34:10 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:34:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:34:10 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:34:10 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:34:10 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:34:10 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:34:10 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:34:10 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:34:10 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:34:10 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:34:10 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:34:10 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: random: fast init done
Oct 11 05:34:10 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:34:10 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:34:10 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:34:10 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:34:10 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:34:10 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:34:10 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:34:10 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:34:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:34:10 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:34:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:34:10 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:34:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:34:10 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:34:10 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:34:10 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:34:10 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:34:10 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:34:10 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:34:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:34:10 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:34:10 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:34:10 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:34:10 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:34:10 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:34:10 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:34:10 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:34:10 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:34:10 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:34:10 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:34:10 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:34:10 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:34:10 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:34:10 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:34:10 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:34:10 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:34:10 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:34:10 IQ138000 kernel: of_cfs_init
Oct 11 05:34:10 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:34:10 IQ138000 kernel: ALSA device list:
Oct 11 05:34:10 IQ138000 kernel:   No soundcards found.
Oct 11 05:34:10 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:34:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:34:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:34:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:34:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:34:10 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:34:10 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:34:10 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:34:10 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:34:10 IQ138000 kernel:   with arguments:
Oct 11 05:34:10 IQ138000 kernel:     /sbin/init
Oct 11 05:34:10 IQ138000 kernel:   with environment:
Oct 11 05:34:10 IQ138000 kernel:     HOME=/
Oct 11 05:34:10 IQ138000 kernel:     TERM=linux
Oct 11 05:34:10 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:34:10 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:34:10 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:34:10 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:34:10 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:34:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:34:10 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:34:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:34:10 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:34:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:34:10 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:34:10 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:34:10 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:34:10 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:34:10 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:34:10 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:34:10 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:34:10 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:34:10 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:34:10 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:34:10 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:34:10 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:34:10 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:34:10 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:34:10 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:34:10 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:34:10 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:34:10 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:34:10 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:34:10 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:34:10 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:34:10 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:34:10 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:34:10 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:34:10 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:34:10 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:34:10 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:34:10 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:34:10 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:34:10 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:34:10 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:34:10 IQ138000 systemd-journald[139]: Journal started
Oct 11 05:34:10 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:34:10 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:34:10 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:34:10 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:34:10 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:34:10 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:34:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:34:10 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:34:10 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:34:11 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:34:11 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:34:11 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:34:11 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:34:11 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:34:11 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:34:11 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:34:11 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:34:11 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:34:11 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:34:11 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:34:11 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:34:11 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:34:11 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:34:11 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:34:11 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:34:11 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:34:12 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 05:34:12 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:34:12 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:34:12 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:34:12 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:34:12 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:34:12 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:34:12 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:34:12 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:34:12 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:34:12 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:34:12 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:34:12 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:34:12 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:34:12 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:34:12 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:34:12 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:34:12 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 05:34:12 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:34:12 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:34:12 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:34:12 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:34:12 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:34:12 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:34:12 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:34:13 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:34:13 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:34:13 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:34:13 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:34:13 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:34:13 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:34:13 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:34:13 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:34:13 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:34:13 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:34:13 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:34:13 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:34:13 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:34:13 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:34:13 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 05:34:13 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:34:13 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:34:13 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:34:13 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:34:13 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:34:13 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:34:13 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:34:13 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:34:13 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:34:13 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:34:13 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 05:34:13 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:34:13 IQ138000 systemd-fsck[216]: data: clean, 16457/328656 files, 371834/1313536 blocks
Oct 11 05:34:13 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:34:13 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:34:13 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:34:13 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:34:13 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:34:13 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:34:13 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:34:13 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:34:13 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:34:13 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.795ms for 461 entries.
Oct 11 05:34:13 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 05:34:14 IQ138000 kernel: random: crng init done
Oct 11 05:34:14 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:34:13 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:34:14 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 05:34:14 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:34:14 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:34:14 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:34:14 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:34:14 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:34:14 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:34:14 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:34:14 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:34:14 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:34:15 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:34:15 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:34:15 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:34:15 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:34:15 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:34:15 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:34:15 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:34:15 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:34:15 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:34:15 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:34:15 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:34:15 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:34:15 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:34:15 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:34:15 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:34:15 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:34:15 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:34:15 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:34:15 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:34:15 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:34:15 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:34:15 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:34:15 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:34:15 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:34:15 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:34:15 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 05:34:15 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:34:15 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:34:15 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:34:15 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 05:34:15 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:34:15 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:34:15 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:34:15 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:34:15 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 05:34:15 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:34:15 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:34:15 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 05:34:15 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:34:15 IQ138000 wb-watchdog[323]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:34:15 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:34:15 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:34:15 IQ138000 migrate.sh[327]: Error: No such file or directory
Oct 11 05:34:16 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:34:16 IQ138000 migrate.sh[336]: Error: No such file or directory
Oct 11 05:34:16 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:34:16 IQ138000 reverse-ssh.sh[343]: Error: No such file or directory
Oct 11 05:34:16 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:34:16 IQ138000 polkitd[329]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:34:16 IQ138000 migrate.sh[351]: Error: No such file or directory
Oct 11 05:34:16 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:34:16 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:34:16 IQ138000 migrate.sh[358]: Error: No such file or directory
Oct 11 05:34:16 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:34:16 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:34:16 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:34:16 IQ138000 migrate.sh[368]: Error: No such file or directory
Oct 11 05:34:16 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:34:16 IQ138000 rules-preprocessor[335]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:34:16 IQ138000 rules-preprocessor[335]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:34:16 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Successfully dropped root privileges.
Oct 11 05:34:16 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: avahi-daemon 0.8 starting up.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Successfully called chroot().
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Successfully dropped remaining capabilities.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: No service file found in /etc/avahi/services.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Network interface enumeration completed.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Registering new address record for ::1 on lo.*.
Oct 11 05:34:16 IQ138000 avahi-daemon[370]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:34:16 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:34:16 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 05:34:16 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:34:16 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:34:16 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:34:16 IQ138000 wpa_supplicant[381]: Successfully initialized wpa_supplicant
Oct 11 05:34:16 IQ138000 systemd-logind[347]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:34:16 IQ138000 systemd-logind[347]: New seat seat0.
Oct 11 05:34:16 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:34:16 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:34:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:34:16 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:34:16 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:34:16 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:16 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:34:16 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:34:16 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:34:16 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:34:16 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:34:16 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:16 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:34:16 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:34:16 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:34:16 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:34:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:34:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:34:16 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:34:17 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:34:17 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.1005] NetworkManager (version 1.42.4) is starting... (boot:d55c14b3-8f74-4fb4-9e51-ad5dad297a7b)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.1010] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:34:17 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.1190] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:34:17 IQ138000 monit[325]: Starting daemon monitor: monit.
Oct 11 05:34:17 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.1728] manager[0x737128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:34:17 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:34:17 IQ138000 avahi-daemon[370]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3870555938.
Oct 11 05:34:17 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:34:17 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:34:17 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:34:17 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:34:17 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:34:17 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:34:17 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:34:17 IQ138000 ModemManager[480]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:34:17 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:34:17 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8318] hostname: hostname: using hostnamed
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8321] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8410] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8494] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8512] manager[0x737128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8515] manager[0x737128]: rfkill: WWAN hardware radio set enabled
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8764] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8859] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.8966] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:34:17 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9232] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9272] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9337] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9342] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9361] manager: Networking is enabled by state file
Oct 11 05:34:17 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9599] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9603] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9604] ifupdown: management mode: unmanaged
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9606] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:34:17 IQ138000 NetworkManager[406]: <info>  [1760160857.9608] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:34:17 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0126] dhcp: init: Using DHCP client 'internal'
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0151] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0278] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0327] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0412] device (lo): Activation: starting connection 'lo' (770e6ddd-1159-44c3-99b9-e1b083031ceb)
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0499] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.0526] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:18 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:34:18 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.4100] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.4122] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.4226] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.4303] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:18 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:34:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:34:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:34:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:34:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:34:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.6370] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.6563] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.6682] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:34:18 IQ138000 NetworkManager[406]: <info>  [1760160858.6711] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.4958] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.5013] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.5079] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.5650] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.5695] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.5778] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.6164] modem-manager: ModemManager available
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.6227] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.6388] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.6404] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.6445] device (lo): Activation: successful, device activated.
Oct 11 05:34:19 IQ138000 wpa_supplicant[381]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9058] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9092] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9121] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9167] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9263] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9293] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9334] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9390] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9453] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9528] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9569] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:34:19 IQ138000 NetworkManager[406]: <info>  [1760160859.9735] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:20 IQ138000 ModemManager[480]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:34:20 IQ138000 ModemManager[480]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:34:20 IQ138000 ModemManager[480]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:34:23 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:34:23 IQ138000 init.sh[1321]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:34:23 IQ138000 init.sh[1336]: In file included from -:16:
Oct 11 05:34:23 IQ138000 init.sh[1336]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:23 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:34:23 IQ138000 init.sh[1321]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:34:24 IQ138000 init.sh[1321]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:34:24 IQ138000 init.sh[1396]: In file included from -:11:
Oct 11 05:34:24 IQ138000 init.sh[1396]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:24 IQ138000 init.sh[1321]: ...
Oct 11 05:34:24 IQ138000 init.sh[1411]: In file included from -:11:
Oct 11 05:34:24 IQ138000 init.sh[1411]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:24 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 05:34:24 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 05:34:24 IQ138000 init.sh[1321]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:34:24 IQ138000 init.sh[1431]: In file included from -:24:
Oct 11 05:34:24 IQ138000 init.sh[1431]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:25 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:34:25 IQ138000 init.sh[1321]: ...
Oct 11 05:34:25 IQ138000 init.sh[1446]: In file included from -:24:
Oct 11 05:34:25 IQ138000 init.sh[1446]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:25 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 05:34:25 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 05:34:25 IQ138000 init.sh[1321]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:34:25 IQ138000 init.sh[1469]: In file included from -:11:
Oct 11 05:34:25 IQ138000 init.sh[1469]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:25 IQ138000 init.sh[1321]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:34:25 IQ138000 init.sh[1492]: In file included from -:11:
Oct 11 05:34:25 IQ138000 init.sh[1492]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:34:25 IQ138000 init.sh[1321]: ...
Oct 11 05:34:26 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:34:26 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:34:26 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:34:26 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:34:26 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:34:26 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:34:26 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:34:26 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:34:26 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:34:26 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:34:26 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:34:26 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:34:26 IQ138000 lsyncd[1620]: 05:34:26 Normal: --- Startup ---
Oct 11 05:34:26 IQ138000 lsyncd[1620]: 05:34:26 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:34:26 IQ138000 lsyncd[1620]: messages
Oct 11 05:34:26 IQ138000 lsyncd[1620]: iq_network_manager/iq_network_manager.log
Oct 11 05:34:26 IQ138000 lsyncd[1620]: journal
Oct 11 05:34:26 IQ138000 knxd[1614]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:34:26 IQ138000 knxd[1614]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:34:26 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:34:26 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:34:26 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:34:26 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:34:26 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:34:27 IQ138000 lsyncd[1633]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:34:27 IQ138000 lsyncd[1627]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:34:27 IQ138000 lsyncd[1627]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:34:27 IQ138000 lsyncd[1620]: 05:34:27 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:34:27 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:34:27 IQ138000 ntpd[1629]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:34:27 IQ138000 ntpd[1629]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:34:27 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 05:34:27 IQ138000 ntpd[1629]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:34:27 IQ138000 ntpd[1629]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:34:27 IQ138000 ntpd[1629]: corporation.  Support and training for ntp-4 are
Oct 11 05:34:27 IQ138000 ntpd[1629]: available at https://www.nwtime.org/support
Oct 11 05:34:27 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 05:34:27 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:34:27 IQ138000 ntpd[1663]: proto: precision = 1.000 usec (-20)
Oct 11 05:34:27 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:34:27 IQ138000 persist_meter_data.sh[1657]: Error: No such file or directory
Oct 11 05:34:27 IQ138000 ntpd[1663]: basedate set to 2020-09-11
Oct 11 05:34:27 IQ138000 ntpd[1663]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:34:27 IQ138000 ntpd[1663]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:34:27 IQ138000 ntpd[1663]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:34:27 IQ138000 ntpd[1663]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:34:27 IQ138000 ntpd[1663]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:34:27 IQ138000 ntpd[1663]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:34:27 IQ138000 ntpd[1663]: Listen normally on 3 lo [::1]:123
Oct 11 05:34:27 IQ138000 ntpd[1663]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:34:27 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:34:27 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:34:27 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:34:27 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:34:27 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:34:27 IQ138000 wb-connection-manager[1508]: Connection LegacyWiFi not found, skipping
Oct 11 05:34:27 IQ138000 wb-mqtt-w1[1687]: MQTT broker localhost:1883
Oct 11 05:34:27 IQ138000 wb-mqtt-w1[1687]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:27 IQ138000 wb-mqtt-w1[1687]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:34:27 IQ138000 wb-knxd-config.sh[1518]: No /dev/ttyKNX found, disabling level2
Oct 11 05:34:27 IQ138000 wb-knxd-config.sh[1518]: Restart knxd
Oct 11 05:34:27 IQ138000 wb-mqtt-w1[1687]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:34:27 IQ138000 wb-mqtt-w1[1687]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:34:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:34:27 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:34:27 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:34:27 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:34:27 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:34:27 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:34:27 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:34:27 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:27 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:34:27 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:34:27 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:34:27 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:34:27 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:34:27 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:27 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:34:27 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:34:28 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:34:28 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:34:28 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:34:28 IQ138000 wb-connection-manager[1508]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:34:28 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:34:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:34:28 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:34:28 IQ138000 vnstatd[1662]: Info: vnStat daemon 2.6 started. (pid:1662 uid:110 gid:117 64-bit)
Oct 11 05:34:28 IQ138000 vnstatd[1662]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:34:28 IQ138000 vnstatd[1662]: Info: Interface "ppp0" disabled.
Oct 11 05:34:28 IQ138000 ntpd[1663]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:34:28 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:34:28 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:34:28 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:34:28 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:34:28 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:34:28 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:28 IQ138000 sshd[1756]: Server listening on 0.0.0.0 port 22.
Oct 11 05:34:28 IQ138000 sshd[1756]: Server listening on :: port 22.
Oct 11 05:34:28 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:34:28 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:34:28 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:34:28 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:34:28 IQ138000 NetworkManager[406]: <error> [1760160868.5663] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:34:28 IQ138000 NetworkManager[406]: <info>  [1760160868.5666] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1508 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:34:28 IQ138000 wb-connection-manager[1508]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:34:28 IQ138000 wpa_supplicant[381]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:34:28 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:34:28 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:34:28 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:34:28 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:34:28 IQ138000 knxd[1855]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:34:28 IQ138000 knxd[1855]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:34:28 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:34:28 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:34:28 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:34:28 IQ138000 reverse-ssh.sh[1886]: Error: No such file or directory
Oct 11 05:34:28 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:34:29 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:34:29 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1191] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1196] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1508 uid=0 result="success"
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1202] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1221] manager: NetworkManager state is now CONNECTING
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1260] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:29 IQ138000 ntpd[1663]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:34:29 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:29 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1450] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1452] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1759] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1929] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1947] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1952] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1953] Config: added 'scan_ssid' value '1'
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1954] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1955] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.1956] Config: added 'psk' value '<hidden>'
Oct 11 05:34:29 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:34:29 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:29 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:34:29 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:34:29 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:29 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.4100] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:34:29 IQ138000 NetworkManager[406]: <info>  [1760160869.4103] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:34:29 IQ138000 wb-adjust-systime[1890]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:34:29 IQ138000 wb-adjust-systime[1890]: Drift file is valid (was recently edited)
Oct 11 05:34:29 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:34:29 IQ138000 mosquitto[1941]: 1760160869: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:34:29 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:34:29 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:34:29 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:34:29 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:34:29 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:34:29 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:34:30 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:34:30 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:34:30 IQ138000 ntpd[1663]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:34:30 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:34:30 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: MQTT broker localhost:1883
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:34:30 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:34:30 IQ138000 wb-mqtt-knx[2056]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:30 IQ138000 wb-mqtt-knx[2056]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] Create indices if necessary
Oct 11 05:34:30 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] Analyzing data table
Oct 11 05:34:30 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:34:30 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:34:30 IQ138000 wb-mqtt-logs[2067]: MQTT broker localhost:1883
Oct 11 05:34:30 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:34:30 IQ138000 wb-mqtt-logs[2067]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:30 IQ138000 wb-mqtt-logs[2067]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:30 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:34:31 IQ138000 wb-mqtt-confed[2022]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:34:31 IQ138000 wb-mqtt-confed[2022]: INFO: [wbgo_mqtt] confed-IQ138000-2022: MQTT connection established
Oct 11 05:34:31 IQ138000 ntpd[1663]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:34:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:34:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.526s CPU time.
Oct 11 05:34:31 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:34:31 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [gpio driver] Started
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:34:31 IQ138000 wb-mqtt-gpio[1918]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:34:31 IQ138000 wb-mqtt-iec104[2046]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:34:31 IQ138000 wb-mqtt-opcua[2108]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:34:32 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:34:32 IQ138000 wb-mqtt-opcua[2236]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:34:32 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:34:32 IQ138000 wb-mqtt-mbgate[2079]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:34:32 IQ138000 wb-mqtt-opcua[2236]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:34:32 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:34:32 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:34:32 IQ138000 wb-mqtt-iec104[2263]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:34:33 IQ138000 wb-mqtt-knx[2056]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:33 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:33 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:34:33 IQ138000 wb-mqtt-knx[2056]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:33 IQ138000 wb-mqtt-knx[2056]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:33 IQ138000 wb-mqtt-knx[2056]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:34:33 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:34:33 IQ138000 wb-mqtt-knx[2056]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:34:33 IQ138000 wb-mqtt-iec104[2263]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:34:33 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:34:33 IQ138000 wb-mqtt-logs[2067]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:33 IQ138000 wb-mqtt-logs[2067]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:33 IQ138000 wb-mqtt-logs[2067]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:33 IQ138000 wb-mqtt-logs[2067]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:34:33 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:34:33 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:34:33 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:34:34 IQ138000 python3[1992]: No data file found at /tmp/network_status_cache.json
Oct 11 05:34:34 IQ138000 python3[1992]: Connecting to MQTT
Oct 11 05:34:34 IQ138000 python3[1992]: Connected to MQTT
Oct 11 05:34:34 IQ138000 python3[1992]: Connection returned result: Connection Accepted.
Oct 11 05:34:34 IQ138000 NetworkManager[406]: <info>  [1760160874.9381] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:34:34 IQ138000 NetworkManager[406]: <info>  [1760160874.9384] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:34:36 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2097 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:34:36 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:34:36 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:34:36 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:34:36 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:34:36 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:34:37 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:37 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New virtual device lo 770e6ddd-1159-44c3-99b9-e1b083031ceb /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:34:37 IQ138000 wb-device-manager[2008]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:34:37 IQ138000 wb-device-manager[2008]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:34:37 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:New active connection lo 770e6ddd-1159-44c3-99b9-e1b083031ceb /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:34:38 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:34:38 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:34:38 IQ138000 kernel: dldo4: disabling
Oct 11 05:34:38 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:34:38 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:34:39 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:34:39 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:39 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:34:39 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:34:39 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:34:39 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: MQTT broker localhost:1883
Oct 11 05:34:39 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:34:39 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:34:39 IQ138000 knxd[3114]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:34:39 IQ138000 knxd[3114]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:34:39 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:34:39 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:39 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:34:39 IQ138000 wb-mqtt-adc[3111]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:34:40 IQ138000 wb-mqtt-confed[2022]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:34:40 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:34:41 IQ138000 wb-gsm[3327]: main: Called from pid 1 (systemd)
Oct 11 05:34:41 IQ138000 wb-mqtt-db[2035]: INFO: [sqlite] DB initialization is done
Oct 11 05:34:41 IQ138000 wb-gsm[3371]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:34:41 IQ138000 wb-usb-otg-start.sh[3428]: : wb-usb-otg-start
Oct 11 05:34:41 IQ138000 wb-usb-otg-start.sh[3428]: main: setup_device()
Oct 11 05:34:41 IQ138000 wb-gsm[3444]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:34:41 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:34:42 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:34:42 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:34:42 IQ138000 kernel: using random self ethernet address
Oct 11 05:34:42 IQ138000 kernel: using random host ethernet address
Oct 11 05:34:42 IQ138000 wb-usb-otg-start.sh[3428]: main: enabling profile rndis
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:34:42 IQ138000 NetworkManager[406]: <info>  [1760160882.1540] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:34:42 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:34:42 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:34:42 IQ138000 systemd-udevd[3448]: Using default interface naming scheme 'v247'.
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:34:42 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:34:42 IQ138000 NetworkManager[406]: <info>  [1760160882.3840] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:34:42 IQ138000 wb-gsm[3508]: should_enable: Should enable GSM modem
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:34:42 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:34:42 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: DB logger started, go to main loop
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:34:43 IQ138000 wb-gsm[3580]: main: Called from pid 3510 (wb-gsm-mm)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:34:43 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:34:43 IQ138000 NetworkManager[406]: <info>  [1760160883.7380] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:34:43 IQ138000 NetworkManager[406]: <info>  [1760160883.7382] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:34:43 IQ138000 wb-gsm[3595]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:34:43 IQ138000 wb-mqtt-db[2035]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:34:43 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:34:44 IQ138000 wb-gsm[3619]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:34:44 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:34:44 IQ138000 npm[1705]: > zigbee2mqtt@2.1.1 start
Oct 11 05:34:44 IQ138000 npm[1705]: > node index.js
Oct 11 05:34:44 IQ138000 python3[1992]: Выполнение: service wb-connection-manager stop
Oct 11 05:34:44 IQ138000 ModemManager[480]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:34:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:34:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:34:47 IQ138000 wb-gsm[4000]: mm_off: Modem is already OFF
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-gsm[4070]: main: Called from pid 3510 (wb-gsm-mm)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-gsm[4081]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:34:48 IQ138000 npm[3676]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:34:48 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:49 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:34:49 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:34:49 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:34:49 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:34:49 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:50 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:51 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:34:53 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:53 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:34:53 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:53 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:34:53 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:34:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:34:53 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:34:53 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:34:53 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:34:53 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:34:53 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:34:53 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:34:53 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:34:53 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:34:53 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.251s CPU time.
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 knxd[4505]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:34:53 IQ138000 knxd[4505]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:34:53 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:34:53 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:34:53 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: MQTT broker localhost:1883
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:34:53 IQ138000 python3[1992]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:34:53 IQ138000 python3[1992]:  
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: w1 thread Started
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:34:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <warn>  [1760160894.5289] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <info>  [1760160894.5291] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <info>  [1760160894.5312] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <warn>  [1760160894.5346] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <info>  [1760160894.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:34:54 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-nm-helper[2097]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <info>  [1760160894.5708] manager: startup complete
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <info>  [1760160894.5722] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:34:54 IQ138000 NetworkManager[406]: <info>  [1760160894.5724] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:34:54 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:34:54 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:34:54 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:34:55 IQ138000 wpa_supplicant[381]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:34:55 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:34:55 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:55 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:34:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:34:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:57 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:57 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:34:57 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:57 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:57 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:34:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:34:58 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:34:58 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:34:58 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:34:58 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:34:58 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:34:58 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:34:58 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:34:58 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:34:58 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:34:58 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:34:58 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:34:58 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:34:58 IQ138000 python3[1992]: Выполнение: mmcli -m wbc
Oct 11 05:34:58 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:34:58 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:34:58 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:34:58 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:34:58 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:34:58 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:34:58 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:34:58 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:34:58 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:34:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:58 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:34:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:58 IQ138000 watchdog[4630]: starting daemon (5.16):
Oct 11 05:34:58 IQ138000 watchdog[4630]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:34:58 IQ138000 watchdog[4630]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:34:58 IQ138000 watchdog[4630]:  ping: no machine to check
Oct 11 05:34:58 IQ138000 watchdog[4630]:  file: no file to check
Oct 11 05:34:58 IQ138000 watchdog[4630]:  pidfile: /var/run/sshd.pid
Oct 11 05:34:58 IQ138000 watchdog[4630]:  interface: no interface to check
Oct 11 05:34:58 IQ138000 watchdog[4630]:  temperature: no sensors to check
Oct 11 05:34:58 IQ138000 watchdog[4630]:  no test binary files
Oct 11 05:34:58 IQ138000 watchdog[4630]:  no repair binary files
Oct 11 05:34:58 IQ138000 watchdog[4630]:  error retry time-out = 30 seconds
Oct 11 05:34:58 IQ138000 watchdog[4630]:  repair attempts = 1
Oct 11 05:34:58 IQ138000 watchdog[4630]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:34:58 IQ138000 watchdog[4630]: watchdog now set to 120 seconds
Oct 11 05:34:58 IQ138000 watchdog[4630]: hardware watchdog identity: WBEC WDT
Oct 11 05:34:58 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:34:58 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:34:58 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:34:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:58 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:34:58 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:34:58 IQ138000 systemd[1]: Startup finished in 3.793s (kernel) + 50.653s (userspace) = 54.446s.
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:59 IQ138000 wb-rules[4613]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:34:59 IQ138000 wb-rules[4613]: INFO: driver is created
Oct 11 05:34:59 IQ138000 wb-rules[4613]: INFO: [wbgo_mqtt] rules-IQ138000-4613: MQTT connection established
Oct 11 05:34:59 IQ138000 wb-rules[4613]: INFO: driver loop is started
Oct 11 05:34:59 IQ138000 wb-rules[4613]: INFO: wait for driver to become ready
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:34:59 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:00 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 wb-rules[4613]: INFO: driver is ready
Oct 11 05:35:01 IQ138000 wb-rules[4613]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:35:01 IQ138000 wb-rules[4613]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4613: MQTT connection established
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 wb-rules[4613]: INFO: [engine] Starting main loop
Oct 11 05:35:01 IQ138000 wb-rules[4613]: INFO: the engine is ready
Oct 11 05:35:01 IQ138000 wb-rules[4613]: INFO: [engine] Starting sync loop
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 4 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:01 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 CRON[4758]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 CRON[4792]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:35:02 IQ138000 CRON[4758]: pam_unix(cron:session): session closed for user root
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:35:02 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:35:02 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:35:02 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:35:02 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, f2:c1:12:4e:c7:04
Oct 11 05:35:02 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:35:02 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:35:02 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:35:02 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:35:02 IQ138000 NetworkManager[406]: <info>  [1760160902.5116] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:35:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 systemd-udevd[4864]: Using default interface naming scheme 'v247'.
Oct 11 05:35:02 IQ138000 wb-rules[4613]: WARNING: [rule warning] DAC: no config file
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 systemd-udevd[4864]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:35:02 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:35:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:35:03 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:35:03 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:03 IQ138000 knxd[5009]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:35:03 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:35:03 IQ138000 knxd[5009]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:35:03 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:35:03 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:35:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:35:04 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:04 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:35:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:04 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:35:04 IQ138000 python3[1992]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:35:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:35:04 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:35:05 IQ138000 wb-gsm[5028]: mm_on: Waiting for modem to start
Oct 11 05:35:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:05 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:05 IQ138000 wb-rules[4613]: INFO: all rule files are loaded
Oct 11 05:35:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:35:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 05:35:08 IQ138000 npm[3676]: [2025-10-11 05:35:08] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 npm[3676]: [2025-10-11 05:35:08] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:35:08 IQ138000 npm[3676]: [2025-10-11 05:35:08] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:35:08 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:35:09 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 8 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:35:09 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 05:35:09 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:35:09 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:09 IQ138000 npm[3676]: [2025-10-11 05:35:09] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:35:09 IQ138000 npm[3676]: [2025-10-11 05:35:09] info:         zh:zstack:znp: Serialport opened
Oct 11 05:35:09 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:35:09 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 5 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:35:10 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:35:10 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:35:11 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:35:11 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:12 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:35:12 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:12 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:35:12.961+00:00
Oct 11 05:35:12 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:35:12 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:35:12.961Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:12 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161092985,"cmd_timestamp_ms":1760160912985,"source":"schedule"}
Oct 11 05:35:12 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161092985,"cmd_timestamp_ms":1760160912985,"source":"schedule"}
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: Currently 4 devices are joined.
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:35:13.209+00:00
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:35:13.209Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161093259,"cmd_timestamp_ms":1760160913259,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161093259,"cmd_timestamp_ms":1760160913259,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:35:13.361+00:00
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:35:13.361Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093391,"cmd_timestamp_ms":1760160913391,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093391,"cmd_timestamp_ms":1760160913391,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:35:13.539+00:00
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:35:13 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:35:13.539Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093579,"cmd_timestamp_ms":1760160913579,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093579,"cmd_timestamp_ms":1760160913579,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:35:13.654+00:00
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m: Connected to MQTT server
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:35:13.654Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:13 IQ138000 npm[3676]: [2025-10-11 05:35:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093668,"cmd_timestamp_ms":1760160913668,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093668,"cmd_timestamp_ms":1760160913668,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:35:13.817+00:00
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:35:13.817Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093832,"cmd_timestamp_ms":1760160913832,"source":"schedule"}
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161093832,"cmd_timestamp_ms":1760160913832,"source":"schedule"}
Oct 11 05:35:13 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:35:13 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:35:13 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:35:13.968+00:00
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:35:13 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:35:13.968Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161094001,"cmd_timestamp_ms":1760160914001,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161094001,"cmd_timestamp_ms":1760160914001,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:35:14 IQ138000 knxd[5173]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:35:14 IQ138000 knxd[5173]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:35:14 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:35:14 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:35:14 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:35:14 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:14 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:35:14.122+00:00
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:35:14.122Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161094142,"cmd_timestamp_ms":1760160914142,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161094142,"cmd_timestamp_ms":1760160914142,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:35:14 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:35:14 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:35:14 IQ138000 wb-rules[4613]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:35:14 IQ138000 npm[3676]: [2025-10-11 05:35:14] info:         z2m: Started frontend on port 8282
Oct 11 05:35:14 IQ138000 npm[3676]: [2025-10-11 05:35:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:35:14 IQ138000 npm[3676]: [2025-10-11 05:35:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:35:14 IQ138000 npm[3676]: [2025-10-11 05:35:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:35:14 IQ138000 npm[3676]: [2025-10-11 05:35:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:35:14 IQ138000 npm[3676]: [2025-10-11 05:35:14] info:         z2m: Zigbee2MQTT started!
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:35:14 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:14 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:35:14 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:35:14.603+00:00
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:35:14.603Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161094616,"cmd_timestamp_ms":1760160914616,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161094616,"cmd_timestamp_ms":1760160914616,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:35:14 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:35:14.722+00:00
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:35:14.722Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161094734,"cmd_timestamp_ms":1760160914734,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161094734,"cmd_timestamp_ms":1760160914734,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:35:14.904+00:00
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:35:14.904Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161094919,"cmd_timestamp_ms":1760160914919,"source":"schedule"}
Oct 11 05:35:14 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161094919,"cmd_timestamp_ms":1760160914919,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:35:15 IQ138000 wb-watchdog[5227]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:35:15.078+00:00
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:35:15.078Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161095086,"cmd_timestamp_ms":1760160915086,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161095086,"cmd_timestamp_ms":1760160915086,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:35:15 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:35:15.234+00:00
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:35:15.234Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161095246,"cmd_timestamp_ms":1760160915246,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161095246,"cmd_timestamp_ms":1760160915246,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:35:15.423+00:00
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:35:15.423Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161095435,"cmd_timestamp_ms":1760160915435,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161095435,"cmd_timestamp_ms":1760160915435,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:35:15.598+00:00
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:35:15.598Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161095607,"cmd_timestamp_ms":1760160915607,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161095607,"cmd_timestamp_ms":1760160915607,"source":"schedule"}
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 16 input(s) @ 8768 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:15 IQ138000 wb-rules[4613]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:35:16 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:35:16 IQ138000 wb-rules[4613]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:35:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:35:16 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:35:16 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:35:16 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:35:17 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:35:17 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:18 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:35:19 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 05:35:19 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:35:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 4 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:35:22 IQ138000 ModemManager[480]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:35:22 IQ138000 ModemManager[480]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:35:22 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:35:23 IQ138000 ModemManager[480]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:35:23 IQ138000 ModemManager[480]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:35:23 IQ138000 python3[1992]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
-- Boot 86fa70f163104f6e80f03b2dbb667536 --
Oct 11 05:37:03 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:37:03 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:37:03 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:37:03 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:37:03 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:37:03 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:37:03 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:37:03 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:37:03 IQ138000 kernel: Zone ranges:
Oct 11 05:37:03 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:37:03 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:37:03 IQ138000 kernel: Movable zone start for each node
Oct 11 05:37:03 IQ138000 kernel: Early memory node ranges
Oct 11 05:37:03 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:37:03 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:37:03 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:37:03 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:37:03 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:37:03 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:37:03 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:37:03 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:37:03 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:37:03 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:37:03 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:37:03 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:37:03 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:37:03 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:37:03 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:37:03 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:37:03 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:37:03 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:37:03 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:37:03 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:37:03 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:37:03 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:37:03 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:37:03 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:37:03 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:37:03 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:37:03 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:37:03 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:37:03 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:37:03 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:37:03 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:37:03 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:37:03 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:37:03 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:37:03 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:37:03 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:37:03 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:37:03 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:37:03 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:37:03 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:37:03 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:37:03 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:37:03 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:37:03 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:37:03 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:37:03 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:37:03 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:37:03 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:37:03 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:37:03 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:37:03 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:37:03 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:37:03 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:37:03 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:37:03 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:37:03 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:37:03 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:37:03 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:37:03 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:37:03 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:37:03 IQ138000 kernel: No ATAGs?
Oct 11 05:37:03 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:37:03 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:37:03 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:37:03 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:37:03 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:37:03 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:37:03 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:37:03 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:37:03 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:37:03 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:37:03 IQ138000 kernel: PTP clock support registered
Oct 11 05:37:03 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:37:03 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:37:03 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:37:03 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:37:03 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:37:03 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:37:03 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:37:03 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:37:03 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:37:03 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:37:03 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:37:03 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:37:03 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:37:03 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:37:03 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:37:03 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:37:03 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:37:03 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:37:03 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:37:03 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:37:03 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:37:03 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:37:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:37:03 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:37:03 IQ138000 kernel: brd: module loaded
Oct 11 05:37:03 IQ138000 kernel: loop: module loaded
Oct 11 05:37:03 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:37:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:37:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:37:03 IQ138000 kernel: CAN device driver interface
Oct 11 05:37:03 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:37:03 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:37:03 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:37:03 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:37:03 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:37:03 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:37:03 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:37:03 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:37:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:37:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:37:03 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:37:03 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:37:03 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:37:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:37:03 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:37:03 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:37:03 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:37:03 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:37:03 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:37:03 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:37:03 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:37:03 IQ138000 kernel: can: controller area network core
Oct 11 05:37:03 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:37:03 IQ138000 kernel: can: raw protocol
Oct 11 05:37:03 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:37:03 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:37:03 IQ138000 kernel: can: SAE J1939
Oct 11 05:37:03 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:37:03 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:37:03 IQ138000 kernel: registered taskstats version 1
Oct 11 05:37:03 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:37:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:37:03 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:37:03 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:37:03 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:37:03 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:37:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:37:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:37:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:36:59 UTC (1760161019)
Oct 11 05:37:03 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:37:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:37:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:37:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:37:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:37:03 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:37:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:37:03 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:37:03 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:37:03 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:37:03 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:37:03 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:37:03 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:37:03 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:37:03 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: random: fast init done
Oct 11 05:37:03 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:37:03 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:37:03 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:37:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:37:03 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:37:03 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:37:03 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:37:03 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:37:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:37:03 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:37:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:37:03 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:37:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:37:03 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:37:03 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:37:03 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:37:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:37:03 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:37:03 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:37:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:37:03 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:37:03 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:37:03 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:37:03 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:37:03 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:37:03 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:37:03 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:37:03 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:37:03 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:37:03 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:37:03 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:37:03 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:37:03 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:37:03 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:37:03 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:37:03 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:37:03 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:37:03 IQ138000 kernel: of_cfs_init
Oct 11 05:37:03 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:37:03 IQ138000 kernel: ALSA device list:
Oct 11 05:37:03 IQ138000 kernel:   No soundcards found.
Oct 11 05:37:03 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:37:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:37:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:37:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:37:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:37:03 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:37:03 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:37:03 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:37:03 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:37:03 IQ138000 kernel:   with arguments:
Oct 11 05:37:03 IQ138000 kernel:     /sbin/init
Oct 11 05:37:03 IQ138000 kernel:   with environment:
Oct 11 05:37:03 IQ138000 kernel:     HOME=/
Oct 11 05:37:03 IQ138000 kernel:     TERM=linux
Oct 11 05:37:03 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:37:03 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:37:03 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:37:03 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:37:03 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:37:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:37:03 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:37:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:37:03 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:37:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:37:03 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:37:03 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:37:03 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:37:03 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:37:03 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:37:03 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:37:03 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:37:03 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:37:03 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:37:03 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:37:03 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:37:03 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:37:03 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:37:03 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:37:03 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:37:03 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:37:03 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:37:03 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:37:03 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:37:03 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:37:03 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:37:03 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:37:03 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:37:03 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:37:03 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:37:03 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:37:03 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:37:03 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:37:03 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:37:03 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:37:03 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:37:03 IQ138000 systemd-journald[137]: Journal started
Oct 11 05:37:03 IQ138000 systemd-journald[137]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:37:03 IQ138000 systemd-fsck[141]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:37:03 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:37:03 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:37:03 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:37:03 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:37:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:37:03 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:37:03 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:37:04 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:37:04 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:37:04 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:37:04 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:37:04 IQ138000 systemd-random-seed[150]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:37:04 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:37:04 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:37:04 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:37:04 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:37:04 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:37:04 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:37:04 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:37:04 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:37:04 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:37:04 IQ138000 systemd-udevd[155]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:37:04 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:37:04 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:37:05 IQ138000 systemd-udevd[156]: Using default interface naming scheme 'v247'.
Oct 11 05:37:05 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:37:05 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:37:05 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:37:05 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:37:05 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:37:05 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:37:05 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:37:05 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:37:05 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:37:05 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:37:05 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:37:05 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:37:05 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 05:37:05 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:37:05 IQ138000 systemd-udevd[163]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:37:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:37:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:37:05 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:37:05 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:37:05 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:37:05 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:37:05 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:37:06 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:37:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:37:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:37:06 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:37:06 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:37:06 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:37:06 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 05:37:06 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:37:06 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:37:06 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:37:06 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:37:06 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:37:06 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:37:06 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:37:06 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:37:06 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:37:06 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:37:06 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:37:06 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:37:06 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:37:06 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:37:06 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:37:06 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:37:06 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:37:06 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:37:06 IQ138000 systemd-fsck[212]: data: recovering journal
Oct 11 05:37:06 IQ138000 systemd-fsck[212]: data: clean, 16456/328656 files, 371834/1313536 blocks
Oct 11 05:37:06 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:37:06 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:37:06 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:37:06 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:37:06 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:37:06 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:37:06 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:37:06 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:37:06 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:37:06 IQ138000 systemd-journald[137]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.201ms for 461 entries.
Oct 11 05:37:06 IQ138000 systemd-journald[137]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 450.3M, max 496.6M, 46.2M free.
Oct 11 05:37:07 IQ138000 kernel: random: crng init done
Oct 11 05:37:07 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:37:06 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:37:07 IQ138000 wb-configs-early[218]: Checking symlinks to /mnt/data
Oct 11 05:37:07 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:37:07 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:37:07 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:37:07 IQ138000 wb-configs-early[218]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:37:07 IQ138000 wb-configs-early[218]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:37:07 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:37:07 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:37:07 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:37:08 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:37:08 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:37:08 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:37:08 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:37:08 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:37:08 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:37:08 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:37:08 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:37:08 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:37:08 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:37:08 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:37:08 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:37:08 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:37:08 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:37:08 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:37:08 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:37:08 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:37:08 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:37:08 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:37:08 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:37:08 IQ138000 cron[296]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:37:08 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:37:08 IQ138000 cron[296]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:37:08 IQ138000 bluetoothd[293]: Bluetooth daemon 5.55
Oct 11 05:37:08 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:37:08 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:37:08 IQ138000 bluetoothd[293]: Starting SDP server
Oct 11 05:37:08 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:37:08 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:37:08 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:37:08 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:37:08 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:37:08 IQ138000 dbus-daemon[297]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=293 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:37:08 IQ138000 bluetoothd[293]: Bluetooth management interface 1.18 initialized
Oct 11 05:37:08 IQ138000 bluetoothd[293]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:37:08 IQ138000 bluetoothd[293]: sap-server: Operation not permitted (1)
Oct 11 05:37:08 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:37:08 IQ138000 config-manager[294]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:37:08 IQ138000 config-manager[294]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:37:08 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:37:09 IQ138000 migrate.sh[318]: Error: No such file or directory
Oct 11 05:37:09 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:37:09 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:37:09 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:37:09 IQ138000 migrate.sh[326]: Error: No such file or directory
Oct 11 05:37:09 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:37:09 IQ138000 migrate.sh[337]: Error: No such file or directory
Oct 11 05:37:09 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:37:09 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Oct 11 05:37:09 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:37:09 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:37:09 IQ138000 migrate.sh[348]: Error: No such file or directory
Oct 11 05:37:09 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:37:09 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:37:09 IQ138000 migrate.sh[357]: Error: No such file or directory
Oct 11 05:37:09 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:37:09 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:37:09 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:37:09 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:37:09 IQ138000 rules-preprocessor[338]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:37:09 IQ138000 rules-preprocessor[338]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:37:09 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:37:09 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Successfully dropped root privileges.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: avahi-daemon 0.8 starting up.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Successfully called chroot().
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Successfully dropped remaining capabilities.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: No service file found in /etc/avahi/services.
Oct 11 05:37:09 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Network interface enumeration completed.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Registering new address record for ::1 on lo.*.
Oct 11 05:37:09 IQ138000 avahi-daemon[369]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:37:09 IQ138000 wb-watch-configs[384]: Watched dirs: /etc /etc/network
Oct 11 05:37:09 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:37:09 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:37:09 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:37:09 IQ138000 wpa_supplicant[378]: Successfully initialized wpa_supplicant
Oct 11 05:37:09 IQ138000 systemd-logind[347]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:37:09 IQ138000 systemd-logind[347]: New seat seat0.
Oct 11 05:37:09 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:37:09 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:37:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:37:09 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:37:09 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:37:09 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:09 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:37:09 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:37:09 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:37:09 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:37:09 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:37:09 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:09 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:37:09 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:37:10 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:37:10 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:37:10 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:37:10 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:37:10 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.1278] NetworkManager (version 1.42.4) is starting... (boot:86fa70f1-6310-4f6e-80f0-3b2dbb667536)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.1282] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.1395] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:37:10 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:37:10 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.1850] manager[0x6c6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:37:10 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:37:10 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 05:37:10 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:37:10 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:37:10 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:37:10 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:37:10 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:37:10 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:37:10 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:37:10 IQ138000 avahi-daemon[369]: Server startup complete. Host name is IQ138000.local. Local service cookie is 848389125.
Oct 11 05:37:10 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:37:10 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:37:10 IQ138000 ModemManager[468]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:37:10 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:37:10 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.8611] hostname: hostname: using hostnamed
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.8614] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.8652] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.8750] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.8767] manager[0x6c6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.8771] manager[0x6c6900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9044] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9156] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9190] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:37:10 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9499] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9535] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9555] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9560] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9565] manager: Networking is enabled by state file
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9617] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9620] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9621] ifupdown: management mode: unmanaged
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9623] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:37:10 IQ138000 NetworkManager[402]: <info>  [1760161030.9626] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:37:10 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=402 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:37:11 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0297] dhcp: init: Using DHCP client 'internal'
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0319] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0435] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0482] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0554] device (lo): Activation: starting connection 'lo' (9b065e21-dd66-4630-bcbf-52bd5e84fac0)
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0639] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.0669] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:11 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:37:11 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.4341] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.4366] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.4407] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.4525] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:11 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:37:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:37:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:37:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:37:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:37:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.6567] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.6716] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.6802] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:37:11 IQ138000 NetworkManager[402]: <info>  [1760161031.6836] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.4895] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.4985] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.5080] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.5685] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.5707] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.5722] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.5826] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.6305] modem-manager: ModemManager available
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.6310] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.6322] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.6360] device (lo): Activation: successful, device activated.
Oct 11 05:37:12 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9510] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9518] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9538] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9560] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9697] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9703] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9726] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9854] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:12 IQ138000 NetworkManager[402]: <info>  [1760161032.9954] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:37:13 IQ138000 NetworkManager[402]: <info>  [1760161033.0011] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:13 IQ138000 NetworkManager[402]: <info>  [1760161033.0030] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:37:13 IQ138000 NetworkManager[402]: <info>  [1760161033.0080] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:13 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:37:13 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:37:13 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:37:16 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:37:16 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:37:16 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 05:37:16 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:16 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:37:16 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:37:17 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:37:17 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 05:37:17 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:17 IQ138000 init.sh[1319]: ...
Oct 11 05:37:17 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 05:37:17 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:17 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 05:37:17 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 05:37:17 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:37:17 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 05:37:17 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:18 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:37:18 IQ138000 init.sh[1319]: ...
Oct 11 05:37:18 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 05:37:18 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:18 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 05:37:18 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 05:37:18 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:37:18 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 05:37:18 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:18 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:37:18 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 05:37:18 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:37:18 IQ138000 init.sh[1319]: ...
Oct 11 05:37:18 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:37:19 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:37:19 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:37:19 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:37:19 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:37:19 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:37:19 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:37:19 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:37:19 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:37:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:37:19 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:37:19 IQ138000 lsyncd[1613]: 05:37:19 Normal: --- Startup ---
Oct 11 05:37:19 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:37:19 IQ138000 lsyncd[1613]: 05:37:19 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:37:19 IQ138000 lsyncd[1613]: messages
Oct 11 05:37:19 IQ138000 lsyncd[1613]: iq_network_manager/iq_network_manager.log
Oct 11 05:37:19 IQ138000 lsyncd[1613]: journal
Oct 11 05:37:19 IQ138000 knxd[1606]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:37:19 IQ138000 knxd[1606]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:37:19 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:37:19 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:37:19 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:37:19 IQ138000 lsyncd[1631]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:37:19 IQ138000 lsyncd[1622]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:37:19 IQ138000 lsyncd[1622]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 05:37:19 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:37:19 IQ138000 lsyncd[1613]: 05:37:19 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:37:19 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:37:19 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:37:20 IQ138000 NetworkManager[402]: <info>  [1760161040.0387] manager: startup complete
Oct 11 05:37:20 IQ138000 ntpd[1628]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:37:20 IQ138000 ntpd[1628]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:37:20 IQ138000 ntpd[1628]: ----------------------------------------------------
Oct 11 05:37:20 IQ138000 ntpd[1628]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:37:20 IQ138000 ntpd[1628]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:37:20 IQ138000 ntpd[1628]: corporation.  Support and training for ntp-4 are
Oct 11 05:37:20 IQ138000 ntpd[1628]: available at https://www.nwtime.org/support
Oct 11 05:37:20 IQ138000 ntpd[1628]: ----------------------------------------------------
Oct 11 05:37:20 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:37:20 IQ138000 ntpd[1656]: proto: precision = 1.000 usec (-20)
Oct 11 05:37:20 IQ138000 ntpd[1656]: basedate set to 2020-09-11
Oct 11 05:37:20 IQ138000 ntpd[1656]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:37:20 IQ138000 persist_meter_data.sh[1652]: Error: No such file or directory
Oct 11 05:37:20 IQ138000 ntpd[1656]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:37:20 IQ138000 ntpd[1656]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:37:20 IQ138000 ntpd[1656]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:37:20 IQ138000 ntpd[1656]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:37:20 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:37:20 IQ138000 ntpd[1656]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:37:20 IQ138000 ntpd[1656]: Listen normally on 3 lo [::1]:123
Oct 11 05:37:20 IQ138000 ntpd[1656]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:37:20 IQ138000 wb-knxd-config.sh[1513]: No /dev/ttyKNX found, disabling level2
Oct 11 05:37:20 IQ138000 wb-knxd-config.sh[1513]: Restart knxd
Oct 11 05:37:20 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:37:20 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:37:20 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:37:20 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:37:20 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:37:20 IQ138000 wb-mqtt-w1[1690]: MQTT broker localhost:1883
Oct 11 05:37:20 IQ138000 wb-mqtt-w1[1690]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:20 IQ138000 wb-mqtt-w1[1690]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:37:20 IQ138000 wb-mqtt-w1[1690]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:37:20 IQ138000 wb-mqtt-w1[1690]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:37:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:37:20 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:37:20 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 05:37:20 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:37:20 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:37:20 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:37:20 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:37:20 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:37:20 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:37:20 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:37:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:37:20 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:37:20 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:37:20 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:37:20 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:20 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:37:20 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:37:20 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:37:20 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:37:21 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:37:21 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:37:21 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:37:21 IQ138000 ntpd[1656]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:37:21 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:37:21 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:37:21 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:37:21 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:37:21 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:37:21 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:37:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:37:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:37:21 IQ138000 sshd[1753]: Server listening on 0.0.0.0 port 22.
Oct 11 05:37:21 IQ138000 sshd[1753]: Server listening on :: port 22.
Oct 11 05:37:21 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:37:21 IQ138000 vnstatd[1655]: Info: vnStat daemon 2.6 started. (pid:1655 uid:110 gid:117 64-bit)
Oct 11 05:37:21 IQ138000 vnstatd[1655]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:37:21 IQ138000 NetworkManager[402]: <error> [1760161041.3866] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:37:21 IQ138000 NetworkManager[402]: <info>  [1760161041.3869] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:37:21 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:37:21 IQ138000 vnstatd[1655]: Info: Interface "ppp0" disabled.
Oct 11 05:37:21 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:37:21 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:21 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:37:21 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:21 IQ138000 wpa_supplicant[378]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:37:21 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:37:21 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:37:21 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:37:21 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:37:21 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:37:21 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:37:21 IQ138000 knxd[1875]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:37:22 IQ138000 knxd[1875]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:37:22 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0435] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0457] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0522] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0662] manager: NetworkManager state is now CONNECTING
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0823] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:22 IQ138000 ntpd[1656]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0901] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.0916] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1313] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1417] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:22 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1513] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1535] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1549] Config: added 'scan_ssid' value '1'
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1567] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1582] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.1593] Config: added 'psk' value '<hidden>'
Oct 11 05:37:22 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:37:22 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.3015] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:37:22 IQ138000 NetworkManager[402]: <info>  [1760161042.3029] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:37:22 IQ138000 reverse-ssh.sh[1921]: Error: No such file or directory
Oct 11 05:37:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:37:22 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:22 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:37:22 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:22 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:37:22 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:37:22 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:37:22 IQ138000 mosquitto[1953]: 1760161042: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:37:22 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:37:22 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:37:22 IQ138000 wb-adjust-systime[1924]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:37:22 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:37:22 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:37:22 IQ138000 wb-adjust-systime[1924]: Drift file is valid (was recently edited)
Oct 11 05:37:23 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:37:23 IQ138000 ntpd[1656]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:37:23 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:37:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: MQTT broker localhost:1883
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: INFO: [sqlite] Create indices if necessary
Oct 11 05:37:23 IQ138000 wb-mqtt-db[2070]: INFO: [sqlite] Analyzing data table
Oct 11 05:37:23 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:37:23 IQ138000 wb-mqtt-knx[2091]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:23 IQ138000 wb-mqtt-knx[2091]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:37:23 IQ138000 wb-mqtt-gpio[1784]: INFO: [gpio driver] Started
Oct 11 05:37:23 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:37:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:37:23 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:37:23 IQ138000 wb-mqtt-logs[2097]: MQTT broker localhost:1883
Oct 11 05:37:23 IQ138000 wb-mqtt-logs[2097]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:23 IQ138000 wb-mqtt-logs[2097]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:24 IQ138000 ntpd[1656]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:37:24 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:37:24 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.531s CPU time.
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2080]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2127]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:37:24 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:37:24 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:37:24 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:37:24 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:37:24 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:37:24 IQ138000 wb-mqtt-confed[2053]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:37:24 IQ138000 wb-mqtt-confed[2053]: INFO: [wbgo_mqtt] confed-IQ138000-2053: MQTT connection established
Oct 11 05:37:24 IQ138000 wb-mqtt-opcua[2203]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:37:24 IQ138000 wb-mqtt-iec104[2221]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:37:25 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:37:25 IQ138000 wb-mqtt-opcua[2203]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:37:25 IQ138000 wb-mqtt-mbgate[2105]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:37:25 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:37:25 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:37:25 IQ138000 wb-mqtt-iec104[2221]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:37:25 IQ138000 wb-mqtt-logs[2097]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:25 IQ138000 wb-mqtt-logs[2097]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:25 IQ138000 wb-mqtt-logs[2097]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:25 IQ138000 wb-mqtt-logs[2097]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:37:25 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:37:25 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:25 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:37:25 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:37:26 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:37:26 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:37:26 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:37:27 IQ138000 wb-mqtt-knx[2091]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:27 IQ138000 wb-mqtt-knx[2091]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:27 IQ138000 wb-mqtt-knx[2091]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:27 IQ138000 wb-mqtt-knx[2091]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:37:27 IQ138000 wb-mqtt-knx[2091]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:37:27 IQ138000 python3[2030]: No data file found at /tmp/network_status_cache.json
Oct 11 05:37:27 IQ138000 python3[2030]: Connecting to MQTT
Oct 11 05:37:27 IQ138000 python3[2030]: Connected to MQTT
Oct 11 05:37:27 IQ138000 python3[2030]: Connection returned result: Connection Accepted.
Oct 11 05:37:27 IQ138000 NetworkManager[402]: <info>  [1760161047.8646] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:37:27 IQ138000 NetworkManager[402]: <info>  [1760161047.8684] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:37:27 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:37:29 IQ138000 dbus-daemon[297]: [system] Connection :1.17 (uid=0 pid=2117 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:37:29 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:37:30 IQ138000 wb-device-manager[2040]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:37:30 IQ138000 wb-device-manager[2040]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New virtual device lo 9b065e21-dd66-4630-bcbf-52bd5e84fac0 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:37:30 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New active connection lo 9b065e21-dd66-4630-bcbf-52bd5e84fac0 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:37:30 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:30 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:31 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:37:31 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:37:31 IQ138000 kernel: dldo4: disabling
Oct 11 05:37:31 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:37:31 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:37:31 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: MQTT broker localhost:1883
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 11
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 11
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 11
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 1
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 1
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 1
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:37:32 IQ138000 wb-mqtt-adc[3137]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:37:32 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:37:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:37:32 IQ138000 knxd[3199]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:37:32 IQ138000 knxd[3199]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:37:32 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:37:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:37:32 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:37:32 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:37:32 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:37:32 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:37:32 IQ138000 wb-mqtt-confed[2053]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:37:34 IQ138000 wb-gsm[3386]: main: Called from pid 1 (systemd)
Oct 11 05:37:34 IQ138000 wb-mqtt-db[2070]: INFO: [sqlite] DB initialization is done
Oct 11 05:37:34 IQ138000 wb-gsm[3435]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-usb-otg-start.sh[3467]: : wb-usb-otg-start
Oct 11 05:37:34 IQ138000 wb-usb-otg-start.sh[3467]: main: setup_device()
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-gsm[3501]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:37:34 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:37:34 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:37:34 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:37:34 IQ138000 kernel: using random self ethernet address
Oct 11 05:37:34 IQ138000 kernel: using random host ethernet address
Oct 11 05:37:34 IQ138000 wb-usb-otg-start.sh[3467]: main: enabling profile rndis
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:37:34 IQ138000 wb-mqtt-serial[1675]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:37:34 IQ138000 NetworkManager[402]: <info>  [1760161054.8549] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:37:34 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:37:34 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:37:34 IQ138000 systemd-udevd[3477]: Using default interface naming scheme 'v247'.
Oct 11 05:37:34 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:37:34 IQ138000 NetworkManager[402]: <info>  [1760161054.9980] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:37:35 IQ138000 wb-gsm[3549]: should_enable: Should enable GSM modem
Oct 11 05:37:35 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: DB logger started, go to main loop
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:37:35 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:37:35 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:37:36 IQ138000 wb-gsm[3629]: main: Called from pid 3551 (wb-gsm-mm)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:37:36 IQ138000 wb-gsm[3640]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:37:36 IQ138000 wb-gsm[3663]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:37:36 IQ138000 wb-mqtt-db[2070]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:37:36 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:37:36 IQ138000 NetworkManager[402]: <info>  [1760161056.7073] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:37:36 IQ138000 NetworkManager[402]: <info>  [1760161056.7076] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:37:36 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:37:37 IQ138000 npm[1694]: > zigbee2mqtt@2.1.1 start
Oct 11 05:37:37 IQ138000 npm[1694]: > node index.js
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:37:37 IQ138000 ModemManager[468]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:37:37 IQ138000 python3[2030]: Выполнение: service wb-connection-manager stop
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:37:37 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:37:38 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:37:39 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:37:40 IQ138000 npm[3738]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:37:40 IQ138000 wb-gsm[4050]: mm_off: Modem is already OFF
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:37:40 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:37:41 IQ138000 wb-gsm[4120]: main: Called from pid 3551 (wb-gsm-mm)
Oct 11 05:37:41 IQ138000 wb-gsm[4131]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:37:41 IQ138000 wb-gsm[4155]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:37:41 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:37:42 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:37:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:43 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:44 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:45 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:37:46 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:37:46 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:37:46 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:46 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:46 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:46 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:37:46 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:37:46 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:37:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:37:46 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:37:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 knxd[4554]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:37:46 IQ138000 knxd[4554]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:37:46 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:37:46 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:37:46 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:46 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: MQTT broker localhost:1883
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:37:46 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:37:46 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:37:46 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: w1 thread Started
Oct 11 05:37:46 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:37:46 IQ138000 wb-mqtt-w1[4562]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:37:46 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:37:46 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:37:46 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.161s CPU time.
Oct 11 05:37:46 IQ138000 python3[2030]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:37:46 IQ138000 python3[2030]:  
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:37:46 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <warn>  [1760161067.5294] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <info>  [1760161067.5297] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <info>  [1760161067.5318] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <warn>  [1760161067.5338] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:37:47 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <info>  [1760161067.5400] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:37:47 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <info>  [1760161067.5731] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:37:47 IQ138000 NetworkManager[402]: <info>  [1760161067.5733] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:37:47 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:37:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:48 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:37:48 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:37:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:48 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:37:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:37:48 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:49 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:37:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:50 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:37:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:51 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:37:51 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:37:51 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:37:51 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:37:51 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:37:51 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:37:51 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:37:51 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:37:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:37:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:37:51 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:37:51 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:37:51 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:37:51 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:37:51 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:37:51 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:37:51 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:37:51 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:37:51 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:37:51 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:37:51 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:37:51 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 05:37:51 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:37:51 IQ138000 python3[2030]: Выполнение: mmcli -m wbc
Oct 11 05:37:51 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:37:51 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 05:37:51 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 05:37:51 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 05:37:51 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 05:37:51 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 05:37:51 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:37:51 IQ138000 watchdog[4627]:  no test binary files
Oct 11 05:37:51 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 05:37:51 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:37:51 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 05:37:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:37:51 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 05:37:51 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:37:51 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 05:37:51 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 05:37:51 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:37:51 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:51 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:37:51 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:37:51 IQ138000 systemd[1]: Startup finished in 3.795s (kernel) + 50.440s (userspace) = 54.235s.
Oct 11 05:37:51 IQ138000 wb-rules[4609]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:37:51 IQ138000 wb-rules[4609]: INFO: driver is created
Oct 11 05:37:51 IQ138000 wb-rules[4609]: INFO: [wbgo_mqtt] rules-IQ138000-4609: MQTT connection established
Oct 11 05:37:51 IQ138000 wb-rules[4609]: INFO: driver loop is started
Oct 11 05:37:51 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:51 IQ138000 wb-rules[4609]: INFO: wait for driver to become ready
Oct 11 05:37:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:37:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:37:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:37:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:52 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:52 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:53 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:53 IQ138000 wb-rules[4609]: INFO: driver is ready
Oct 11 05:37:53 IQ138000 wb-rules[4609]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:37:53 IQ138000 wb-rules[4609]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4609: MQTT connection established
Oct 11 05:37:53 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:53 IQ138000 wb-rules[4609]: INFO: [engine] Starting main loop
Oct 11 05:37:53 IQ138000 wb-rules[4609]: INFO: the engine is ready
Oct 11 05:37:53 IQ138000 wb-rules[4609]: INFO: [engine] Starting sync loop
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 6 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:54 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:37:54 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:37:54 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:37:54 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:37:54 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:54 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:37:54 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:37:54 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:37:54 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:54 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 4a:01:28:5d:2f:d8
Oct 11 05:37:54 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:37:54 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:37:54 IQ138000 NetworkManager[402]: <info>  [1760161074.9708] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:37:55 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:37:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:37:55 IQ138000 systemd-udevd[4797]: Using default interface naming scheme 'v247'.
Oct 11 05:37:55 IQ138000 systemd-udevd[4797]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:37:55 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 05:37:55 IQ138000 wb-rules[4609]: WARNING: [rule warning] DAC: no config file
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:55 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:37:56 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:37:56 IQ138000 knxd[4994]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:37:56 IQ138000 knxd[4994]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:37:56 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:37:56 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:37:56 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:37:56 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:37:57 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:37:57 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:57 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:37:57 IQ138000 wb-gsm[5009]: mm_on: Waiting for modem to start
Oct 11 05:37:57 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:37:57 IQ138000 python3[2030]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:37:57 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:37:58 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:58 IQ138000 wb-rules[4609]: INFO: all rule files are loaded
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:37:59 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:37:59 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 npm[3738]: [2025-10-11 05:38:00] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:38:00 IQ138000 npm[3738]: [2025-10-11 05:38:00] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:38:00 IQ138000 npm[3738]: [2025-10-11 05:38:00] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:00 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:00 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:01 IQ138000 npm[3738]: [2025-10-11 05:38:01] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:01 IQ138000 npm[3738]: [2025-10-11 05:38:01] info:         zh:zstack:znp: Serialport opened
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:01 IQ138000 CRON[5066]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:01 IQ138000 CRON[5070]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 05:38:01 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:01 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:01 IQ138000 sSMTP[5078]: Unable to locate mail
Oct 11 05:38:01 IQ138000 sSMTP[5078]: Cannot open mail:25
Oct 11 05:38:01 IQ138000 cron[5078]: sendmail: Cannot open mail:25
Oct 11 05:38:01 IQ138000 CRON[5066]: (root) MAIL (mailed 225 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 05:38:01 IQ138000 CRON[5066]: pam_unix(cron:session): session closed for user root
Oct 11 05:38:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:38:02 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:38:02 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:38:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:38:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:38:02 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:02 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:38:03 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:38:04 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: Currently 4 devices are joined.
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:38:04 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m: Connected to MQTT server
Oct 11 05:38:04 IQ138000 npm[3738]: [2025-10-11 05:38:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:38:05 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:38:05 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:38:05 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:38:05 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:38:05 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:05 IQ138000 npm[3738]: [2025-10-11 05:38:05] info:         z2m: Started frontend on port 8282
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:05 IQ138000 npm[3738]: [2025-10-11 05:38:05] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:38:05 IQ138000 npm[3738]: [2025-10-11 05:38:05] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:38:05 IQ138000 npm[3738]: [2025-10-11 05:38:05] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:38:05 IQ138000 npm[3738]: [2025-10-11 05:38:05] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:38:05 IQ138000 npm[3738]: [2025-10-11 05:38:05] info:         z2m: Zigbee2MQTT started!
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:38:05.832+00:00
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:38:05.832Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161265848,"cmd_timestamp_ms":1760161085848,"source":"schedule"}
Oct 11 05:38:05 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161265848,"cmd_timestamp_ms":1760161085848,"source":"schedule"}
Oct 11 05:38:05 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:38:06.081+00:00
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:38:06.081Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161266102,"cmd_timestamp_ms":1760161086102,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161266102,"cmd_timestamp_ms":1760161086102,"source":"schedule"}
Oct 11 05:38:06 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:38:06.266+00:00
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:38:06.266Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266279,"cmd_timestamp_ms":1760161086279,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266279,"cmd_timestamp_ms":1760161086279,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:38:06.517+00:00
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:38:06.517Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266530,"cmd_timestamp_ms":1760161086530,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266530,"cmd_timestamp_ms":1760161086530,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:38:06.736+00:00
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:38:06.736Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266751,"cmd_timestamp_ms":1760161086751,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266751,"cmd_timestamp_ms":1760161086751,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:06 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:38:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:38:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:38:06.877+00:00
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:38:06 IQ138000 knxd[5175]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:38:06 IQ138000 knxd[5175]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:38:06 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:38:06 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:38:06 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:38:06.877Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266926,"cmd_timestamp_ms":1760161086926,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161266926,"cmd_timestamp_ms":1760161086926,"source":"schedule"}
Oct 11 05:38:06 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:38:07.090+00:00
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:38:07.090Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161267111,"cmd_timestamp_ms":1760161087111,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161267111,"cmd_timestamp_ms":1760161087111,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:38:07 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:38:07.250+00:00
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:38:07.250Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161267261,"cmd_timestamp_ms":1760161087261,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161267261,"cmd_timestamp_ms":1760161087261,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 4 input(s) @ 4884 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:38:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:38:07.604+00:00
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:38:07.604Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161267617,"cmd_timestamp_ms":1760161087617,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161267617,"cmd_timestamp_ms":1760161087617,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:38:07.815+00:00
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:38:07.815Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161267828,"cmd_timestamp_ms":1760161087828,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161267828,"cmd_timestamp_ms":1760161087828,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:38:07.974+00:00
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:38:07.974Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161267994,"cmd_timestamp_ms":1760161087994,"source":"schedule"}
Oct 11 05:38:07 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161267994,"cmd_timestamp_ms":1760161087994,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-watchdog[5225]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:38:08.134+00:00
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:38:08.134Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161268147,"cmd_timestamp_ms":1760161088147,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161268147,"cmd_timestamp_ms":1760161088147,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:38:08 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:38:08.308+00:00
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:38:08.308Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161268323,"cmd_timestamp_ms":1760161088323,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161268323,"cmd_timestamp_ms":1760161088323,"source":"schedule"}
Oct 11 05:38:08 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:38:08.455+00:00
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:38:08.455Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161268469,"cmd_timestamp_ms":1760161088469,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161268469,"cmd_timestamp_ms":1760161088469,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:38:08.607+00:00
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:38:08.607Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161268618,"cmd_timestamp_ms":1760161088618,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161268618,"cmd_timestamp_ms":1760161088618,"source":"schedule"}
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:38:08 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:38:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:09 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:38:09 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:38:09 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:38:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:38:09 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:38:09 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:38:09 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:38:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:38:10 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:10 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:38:11 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:38:11 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:38:11 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:11 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:12 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:12 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:12 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:13 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:13 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:14 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:38:14 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:15 IQ138000 ModemManager[468]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:38:15 IQ138000 ModemManager[468]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:38:15 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:16 IQ138000 ModemManager[468]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:38:16 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:38:16 IQ138000 python3[2030]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:38:16 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:38:16 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:38:17 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:38:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:38:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:38:17 IQ138000 knxd[5391]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:38:17 IQ138000 knxd[5391]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:38:17 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:38:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:38:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:38:17 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:38:17 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:38:17 IQ138000 ModemManager[468]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:38:17 IQ138000 ModemManager[468]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7361] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7389] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7413] device (ttyUSB1): modem state 'enabling'
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7447] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7473] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7507] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7515] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:17 IQ138000 NetworkManager[402]: <info>  [1760161097.7538] manager: NetworkManager state is now CONNECTING
Oct 11 05:38:17 IQ138000 ModemManager[468]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:38:17 IQ138000 wb-mqtt-nm-helper[2117]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:38:17 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:17 IQ138000 ModemManager[468]: <info>  [modem0] power state updated: on
Oct 11 05:38:17 IQ138000 python3[2030]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:38:17 IQ138000 python3[2030]:    --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:38:17 IQ138000 python3[2030]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:38:17 IQ138000 python3[2030]:            |                model: A7602E-H
Oct 11 05:38:17 IQ138000 python3[2030]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:38:17 IQ138000 python3[2030]:            |            supported: gsm-umts
Oct 11 05:38:17 IQ138000 python3[2030]:            |              current: gsm-umts
Oct 11 05:38:17 IQ138000 python3[2030]:            |         equipment id: 860803062234204
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   System   |               device: wbc
Oct 11 05:38:17 IQ138000 python3[2030]:            |              drivers: option, rndis_host
Oct 11 05:38:17 IQ138000 python3[2030]:            |               plugin: simtech
Oct 11 05:38:17 IQ138000 python3[2030]:            |         primary port: ttyUSB1
Oct 11 05:38:17 IQ138000 python3[2030]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:38:17 IQ138000 python3[2030]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:38:17 IQ138000 python3[2030]:            |                state: enabling
Oct 11 05:38:17 IQ138000 python3[2030]:            |          power state: on
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:38:17 IQ138000 python3[2030]:            |              current: allowed: any; preferred: none
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   3GPP     |                 imei: 860803062234204
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:38:17 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:17 IQ138000 python3[2030]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:17 IQ138000 python3[2030]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:38:17 IQ138000 python3[2030]:            |                       slot 2: none
Oct 11 05:38:17 IQ138000 python3[2030]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:38:18 IQ138000 python3[2030]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:38:18 IQ138000 python3[2030]:  successfully requested primary SIM switch in modem
Oct 11 05:38:18 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:18 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:38:19 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:19 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:20 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:38:20 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:38:20 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:38:20 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:38:20 IQ138000 lsyncd[5426]: 05:38:20 Normal: --- Startup ---
Oct 11 05:38:20 IQ138000 lsyncd[5426]: 05:38:20 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:38:20 IQ138000 lsyncd[5426]: iq_network_manager/iq_network_manager.log
Oct 11 05:38:20 IQ138000 lsyncd[5426]: journal
Oct 11 05:38:20 IQ138000 lsyncd[5426]: messages
Oct 11 05:38:20 IQ138000 lsyncd[5428]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:38:20 IQ138000 lsyncd[5427]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:38:20 IQ138000 lsyncd[5427]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:38:20 IQ138000 lsyncd[5426]: 05:38:20 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:38:20 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:38:20 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:38:21 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] simple connect started...
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:38:22 IQ138000 ModemManager[468]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:38:22 IQ138000 NetworkManager[402]: <info>  [1760161102.5575] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:22 IQ138000 NetworkManager[402]: <info>  [1760161102.5588] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:38:22 IQ138000 NetworkManager[402]: <info>  [1760161102.5619] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:38:22 IQ138000 NetworkManager[402]: <info>  [1760161102.5639] ppp-manager: starting PPP connection
Oct 11 05:38:22 IQ138000 NetworkManager[402]: <info>  [1760161102.5819] ppp-manager: pppd started with pid 5445
Oct 11 05:38:22 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:38:22 IQ138000 pppd[5445]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: initializing
Oct 11 05:38:22 IQ138000 NetworkManager[5445]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:38:22 IQ138000 pppd[5445]: pppd 2.4.9 started by root, uid 0
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:38:22 IQ138000 pppd[5445]: Using interface ppp0
Oct 11 05:38:22 IQ138000 NetworkManager[5445]: Using interface ppp0
Oct 11 05:38:22 IQ138000 NetworkManager[5445]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:38:22 IQ138000 pppd[5445]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:38:22 IQ138000 NetworkManager[402]: <info>  [1760161102.6497] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:38:22 IQ138000 pppd[5445]: PAP authentication succeeded
Oct 11 05:38:22 IQ138000 NetworkManager[5445]: PAP authentication succeeded
Oct 11 05:38:22 IQ138000 pppd[5445]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:38:22 IQ138000 pppd[5445]: kernel does not support PPP filtering
Oct 11 05:38:22 IQ138000 NetworkManager[5445]: kernel does not support PPP filtering
Oct 11 05:38:22 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:38:22 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:22 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:38:22 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:22 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:38:23 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:23 IQ138000 ModemManager[468]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:23 IQ138000 pppd[5445]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:38:23 IQ138000 NetworkManager[5445]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:38:23 IQ138000 pppd[5445]: local  IP address 10.97.222.218
Oct 11 05:38:23 IQ138000 pppd[5445]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:38:23 IQ138000 NetworkManager[5445]: local  IP address 10.97.222.218
Oct 11 05:38:23 IQ138000 NetworkManager[5445]: remote IP address 10.64.64.64
Oct 11 05:38:23 IQ138000 NetworkManager[5445]: primary   DNS address 172.23.10.130
Oct 11 05:38:23 IQ138000 NetworkManager[5445]: secondary DNS address 172.23.10.131
Oct 11 05:38:23 IQ138000 pppd[5445]: remote IP address 10.64.64.64
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.3007] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:23 IQ138000 pppd[5445]: primary   DNS address 172.23.10.130
Oct 11 05:38:23 IQ138000 pppd[5445]: secondary DNS address 172.23.10.131
Oct 11 05:38:23 IQ138000 pppd[5445]: nm-ppp-plugin: ip-up event
Oct 11 05:38:23 IQ138000 pppd[5445]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.3118] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.3158] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.3188] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.3237] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:38:23 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=402 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:38:23 IQ138000 dbus-daemon[297]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.3655] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:23 IQ138000 dbus-daemon[297]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=402 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:38:23 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:23 IQ138000 dbus-daemon[297]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:38:23 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.4709] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.4720] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.4739] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.4759] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:38:23 IQ138000 NetworkManager[402]: <info>  [1760161103.4791] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:23 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:24 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:25 IQ138000 ntpd[1656]: Listen normally on 4 ppp0 10.97.222.218:123
Oct 11 05:38:25 IQ138000 ntpd[1656]: new interface(s) found: waking up resolver
Oct 11 05:38:25 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:25 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:25 IQ138000 vnstatd[1655]: Info: Interface "ppp0" enabled.
Oct 11 05:38:25 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:25 IQ138000 wb-mqtt-serial[1675]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:38:26 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:38:26 IQ138000 ntpd[1656]: Soliciting pool server 51.250.110.169
Oct 11 05:38:27 IQ138000 ntpd[1656]: Soliciting pool server 89.179.240.219
Oct 11 05:38:27 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:38:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:38:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:38:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:38:27 IQ138000 wb-mqtt-knx[2091]: INFO: knxd connected successfully
Oct 11 05:38:27 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:38:27 IQ138000 wb-mqtt-serial[1675]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:38:27 IQ138000 wb-mqtt-serial[1675]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:38:27 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:38:28 IQ138000 python3[2030]: Выполнение: mmcli -i any
Oct 11 05:38:28 IQ138000 ntpd[1656]: Soliciting pool server 87.103.245.205
Oct 11 05:38:28 IQ138000 python3[2030]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:38:28 IQ138000 python3[2030]:    -------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:28 IQ138000 python3[2030]:   -------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Properties |            active: yes
Oct 11 05:38:28 IQ138000 python3[2030]:              |              imsi: 250997340491874
Oct 11 05:38:28 IQ138000 python3[2030]:              |             iccid: 8970199210429593744
Oct 11 05:38:28 IQ138000 python3[2030]:              |       operator id: 25099
Oct 11 05:38:28 IQ138000 python3[2030]:              |     operator name: Beeline
Oct 11 05:38:28 IQ138000 python3[2030]: Выполнение: mmcli -m wbc
Oct 11 05:38:28 IQ138000 ntpd[1656]: Soliciting pool server 51.250.0.158
Oct 11 05:38:28 IQ138000 ntpd[1656]: Soliciting pool server 51.250.68.198
Oct 11 05:38:28 IQ138000 python3[2030]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:38:28 IQ138000 python3[2030]:    --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:38:28 IQ138000 python3[2030]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:38:28 IQ138000 python3[2030]:            |                model: A7602E-H
Oct 11 05:38:28 IQ138000 python3[2030]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:38:28 IQ138000 python3[2030]:            |            supported: gsm-umts
Oct 11 05:38:28 IQ138000 python3[2030]:            |              current: gsm-umts
Oct 11 05:38:28 IQ138000 python3[2030]:            |         equipment id: 860803062234204
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   System   |               device: wbc
Oct 11 05:38:28 IQ138000 python3[2030]:            |              drivers: option, rndis_host
Oct 11 05:38:28 IQ138000 python3[2030]:            |               plugin: simtech
Oct 11 05:38:28 IQ138000 python3[2030]:            |         primary port: ttyUSB1
Oct 11 05:38:28 IQ138000 python3[2030]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:38:28 IQ138000 python3[2030]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:38:28 IQ138000 python3[2030]:            |                state: connected
Oct 11 05:38:28 IQ138000 python3[2030]:            |          power state: on
Oct 11 05:38:28 IQ138000 python3[2030]:            |          access tech: lte
Oct 11 05:38:28 IQ138000 python3[2030]:            |       signal quality: 96% (recent)
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:38:28 IQ138000 python3[2030]:            |              current: allowed: any; preferred: none
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   3GPP     |                 imei: 860803062234204
Oct 11 05:38:28 IQ138000 python3[2030]:            |          operator id: 25099
Oct 11 05:38:28 IQ138000 python3[2030]:            |        operator name: beeline
Oct 11 05:38:28 IQ138000 python3[2030]:            |         registration: home
Oct 11 05:38:28 IQ138000 python3[2030]:            | packet service state: attached
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:28 IQ138000 python3[2030]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:38:28 IQ138000 python3[2030]:            |                       slot 2: none
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:38:28 IQ138000 python3[2030]: Current state: home
Oct 11 05:38:28 IQ138000 python3[2030]: SIM registered in the network.
Oct 11 05:38:28 IQ138000 python3[2030]: Выполнение: mmcli -m wbc
Oct 11 05:38:28 IQ138000 python3[2030]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:38:28 IQ138000 python3[2030]:    --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:38:28 IQ138000 python3[2030]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:38:28 IQ138000 python3[2030]:            |                model: A7602E-H
Oct 11 05:38:28 IQ138000 python3[2030]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:38:28 IQ138000 python3[2030]:            |            supported: gsm-umts
Oct 11 05:38:28 IQ138000 python3[2030]:            |              current: gsm-umts
Oct 11 05:38:28 IQ138000 python3[2030]:            |         equipment id: 860803062234204
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   System   |               device: wbc
Oct 11 05:38:28 IQ138000 python3[2030]:            |              drivers: option, rndis_host
Oct 11 05:38:28 IQ138000 python3[2030]:            |               plugin: simtech
Oct 11 05:38:28 IQ138000 python3[2030]:            |         primary port: ttyUSB1
Oct 11 05:38:28 IQ138000 python3[2030]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:38:28 IQ138000 python3[2030]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:38:28 IQ138000 python3[2030]:            |                state: connected
Oct 11 05:38:28 IQ138000 python3[2030]:            |          power state: on
Oct 11 05:38:28 IQ138000 python3[2030]:            |          access tech: lte
Oct 11 05:38:28 IQ138000 python3[2030]:            |       signal quality: 96% (recent)
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:38:28 IQ138000 python3[2030]:            |              current: allowed: any; preferred: none
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   3GPP     |                 imei: 860803062234204
Oct 11 05:38:28 IQ138000 python3[2030]:            |          operator id: 25099
Oct 11 05:38:28 IQ138000 python3[2030]:            |        operator name: beeline
Oct 11 05:38:28 IQ138000 python3[2030]:            |         registration: home
Oct 11 05:38:28 IQ138000 python3[2030]:            | packet service state: attached
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:28 IQ138000 python3[2030]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:38:28 IQ138000 python3[2030]:            |                       slot 2: none
Oct 11 05:38:28 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:38:28 IQ138000 python3[2030]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:28 IQ138000 python3[2030]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:38:28 IQ138000 python3[2030]:    -------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:28 IQ138000 python3[2030]:   -------------------------------
Oct 11 05:38:28 IQ138000 python3[2030]:   Properties |            active: yes
Oct 11 05:38:28 IQ138000 python3[2030]:              |              imsi: 250997340491874
Oct 11 05:38:28 IQ138000 python3[2030]:              |             iccid: 8970199210429593744
Oct 11 05:38:28 IQ138000 python3[2030]:              |       operator id: 25099
Oct 11 05:38:28 IQ138000 python3[2030]:              |     operator name: Beeline
Oct 11 05:38:28 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:29 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:29 IQ138000 ntpd[1656]: Soliciting pool server 185.209.85.222
Oct 11 05:38:29 IQ138000 ntpd[1656]: Soliciting pool server 37.79.216.163
Oct 11 05:38:29 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.3
Oct 11 05:38:29 IQ138000 ntpd[1656]: Soliciting pool server 5.23.52.97
Oct 11 05:38:29 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:29 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:30 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:30 IQ138000 ntpd[1656]: Soliciting pool server 217.69.139.133
Oct 11 05:38:30 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.22
Oct 11 05:38:30 IQ138000 ntpd[1656]: Soliciting pool server 51.250.53.172
Oct 11 05:38:30 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:31 IQ138000 ntpd[1656]: Soliciting pool server 185.247.185.18
Oct 11 05:38:31 IQ138000 ntpd[1656]: Soliciting pool server 192.36.143.130
Oct 11 05:38:31 IQ138000 ntpd[1656]: Soliciting pool server 151.0.2.53
Oct 11 05:38:31 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:32 IQ138000 ntpd[1656]: Soliciting pool server 2001:678:68c::3
Oct 11 05:38:32 IQ138000 ntpd[1656]: Soliciting pool server 162.159.200.123
Oct 11 05:38:32 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:32 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 python3[2030]: Выполнение: mmcli -m wbc
Oct 11 05:38:33 IQ138000 python3[2030]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:38:33 IQ138000 python3[2030]:    --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:38:33 IQ138000 python3[2030]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:38:33 IQ138000 python3[2030]:            |                model: A7602E-H
Oct 11 05:38:33 IQ138000 python3[2030]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:38:33 IQ138000 python3[2030]:            |            supported: gsm-umts
Oct 11 05:38:33 IQ138000 python3[2030]:            |              current: gsm-umts
Oct 11 05:38:33 IQ138000 python3[2030]:            |         equipment id: 860803062234204
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   System   |               device: wbc
Oct 11 05:38:33 IQ138000 python3[2030]:            |              drivers: option, rndis_host
Oct 11 05:38:33 IQ138000 python3[2030]:            |               plugin: simtech
Oct 11 05:38:33 IQ138000 python3[2030]:            |         primary port: ttyUSB1
Oct 11 05:38:33 IQ138000 python3[2030]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:38:33 IQ138000 python3[2030]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:38:33 IQ138000 python3[2030]:            |                state: connected
Oct 11 05:38:33 IQ138000 python3[2030]:            |          power state: on
Oct 11 05:38:33 IQ138000 python3[2030]:            |          access tech: lte
Oct 11 05:38:33 IQ138000 python3[2030]:            |       signal quality: 96% (recent)
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:38:33 IQ138000 python3[2030]:            |              current: allowed: any; preferred: none
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   3GPP     |                 imei: 860803062234204
Oct 11 05:38:33 IQ138000 python3[2030]:            |          operator id: 25099
Oct 11 05:38:33 IQ138000 python3[2030]:            |        operator name: beeline
Oct 11 05:38:33 IQ138000 python3[2030]:            |         registration: home
Oct 11 05:38:33 IQ138000 python3[2030]:            | packet service state: attached
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:33 IQ138000 python3[2030]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:38:33 IQ138000 python3[2030]:            |                       slot 2: none
Oct 11 05:38:33 IQ138000 python3[2030]:   --------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:38:33 IQ138000 python3[2030]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 python3[2030]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:38:33 IQ138000 python3[2030]:    -------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:38:33 IQ138000 python3[2030]:   -------------------------------
Oct 11 05:38:33 IQ138000 python3[2030]:   Properties |            active: yes
Oct 11 05:38:33 IQ138000 python3[2030]:              |              imsi: 250997340491874
Oct 11 05:38:33 IQ138000 python3[2030]:              |             iccid: 8970199210429593744
Oct 11 05:38:33 IQ138000 python3[2030]:              |       operator id: 25099
Oct 11 05:38:33 IQ138000 python3[2030]:              |     operator name: Beeline
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:33 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:38:34 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:38:35 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:38:35 IQ138000 wb-mqtt-serial[1675]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
-- Boot 8d460246a6c04e559fd231141b637b06 --
Oct 11 05:40:11 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:40:11 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:40:11 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:40:11 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:40:11 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:40:11 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:40:11 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:40:11 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:40:11 IQ138000 kernel: Zone ranges:
Oct 11 05:40:11 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:40:11 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:40:11 IQ138000 kernel: Movable zone start for each node
Oct 11 05:40:11 IQ138000 kernel: Early memory node ranges
Oct 11 05:40:11 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:40:11 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:40:11 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:40:11 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:40:11 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:40:11 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:40:11 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:40:11 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:40:11 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:40:11 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:40:11 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:40:11 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:40:11 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:40:11 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:40:11 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:40:11 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:40:11 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:40:11 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:40:11 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:40:11 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:40:11 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:40:11 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:40:11 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:40:11 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:40:11 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:40:11 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:40:11 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:40:11 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:40:11 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:40:11 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:40:11 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:40:11 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:40:11 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:40:11 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:40:11 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:40:11 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:40:11 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:40:11 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:40:11 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:40:11 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:40:11 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:40:11 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:40:11 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:40:11 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:40:11 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:40:11 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:40:11 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:40:11 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:40:11 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:40:11 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:40:11 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:40:11 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:40:11 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:40:11 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:40:11 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:40:11 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:40:11 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:40:11 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:40:11 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:40:11 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:40:11 IQ138000 kernel: No ATAGs?
Oct 11 05:40:11 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:40:11 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:40:11 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:40:11 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:40:11 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:40:11 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:40:11 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:40:11 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:40:11 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:40:11 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:40:11 IQ138000 kernel: PTP clock support registered
Oct 11 05:40:11 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:40:11 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:40:11 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:40:11 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:40:11 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:40:11 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:40:11 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:40:11 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:40:11 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:40:11 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:40:11 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:40:11 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:40:11 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:40:11 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:40:11 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:40:11 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:40:11 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:40:11 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:40:11 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:40:11 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:40:11 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:40:11 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:40:11 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:40:11 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:40:11 IQ138000 kernel: brd: module loaded
Oct 11 05:40:11 IQ138000 kernel: loop: module loaded
Oct 11 05:40:11 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:40:11 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:40:11 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:40:11 IQ138000 kernel: CAN device driver interface
Oct 11 05:40:11 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:40:11 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:40:11 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:40:11 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:40:11 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:40:11 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:40:11 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:40:11 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:40:11 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:40:11 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:40:11 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:40:11 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:40:11 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:40:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:40:11 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:40:11 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:40:11 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:40:11 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:40:11 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:40:11 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:40:11 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:40:11 IQ138000 kernel: can: controller area network core
Oct 11 05:40:11 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:40:11 IQ138000 kernel: can: raw protocol
Oct 11 05:40:11 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:40:11 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:40:11 IQ138000 kernel: can: SAE J1939
Oct 11 05:40:11 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:40:11 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:40:11 IQ138000 kernel: registered taskstats version 1
Oct 11 05:40:11 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:40:11 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:40:11 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:40:11 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:40:11 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:40:11 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:40:11 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:40:11 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:40:11 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:40:07 UTC (1760161207)
Oct 11 05:40:11 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:40:11 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:40:11 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:40:11 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:40:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:40:11 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:40:11 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:40:11 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:40:11 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:40:11 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:40:11 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:40:11 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:40:11 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:40:11 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:40:11 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: random: fast init done
Oct 11 05:40:11 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:40:11 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:40:11 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:40:11 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:40:11 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:40:11 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:40:11 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:40:11 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:40:11 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:40:11 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:40:11 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:40:11 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:40:11 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:40:11 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:40:11 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:40:11 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:40:11 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:40:11 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:40:11 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:40:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:40:11 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:40:11 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:40:11 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:40:11 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:40:11 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:40:11 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:40:11 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:40:11 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:40:11 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:40:11 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:40:11 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:40:11 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:40:11 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:40:11 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:40:11 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:40:11 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:40:11 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:40:11 IQ138000 kernel: of_cfs_init
Oct 11 05:40:11 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:40:11 IQ138000 kernel: ALSA device list:
Oct 11 05:40:11 IQ138000 kernel:   No soundcards found.
Oct 11 05:40:11 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:40:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:40:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:40:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:40:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:40:11 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:40:11 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:40:11 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:40:11 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:40:11 IQ138000 kernel:   with arguments:
Oct 11 05:40:11 IQ138000 kernel:     /sbin/init
Oct 11 05:40:11 IQ138000 kernel:   with environment:
Oct 11 05:40:11 IQ138000 kernel:     HOME=/
Oct 11 05:40:11 IQ138000 kernel:     TERM=linux
Oct 11 05:40:11 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:40:11 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:40:11 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:40:11 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:40:11 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:40:11 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:40:11 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:40:11 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:40:11 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:40:11 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:40:11 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:40:11 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:40:11 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:40:11 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:40:11 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:40:11 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:40:11 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:40:11 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:40:11 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:40:11 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:40:11 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:40:11 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:40:11 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:40:11 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:40:11 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:40:11 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:40:11 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:40:11 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:40:11 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:40:11 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:40:11 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:40:11 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:40:11 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:40:11 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:40:11 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:40:11 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:40:11 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:40:11 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:40:11 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:40:11 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:40:11 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:40:11 IQ138000 systemd-journald[139]: Journal started
Oct 11 05:40:11 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:40:11 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278739/524288 blocks
Oct 11 05:40:11 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:40:11 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:40:11 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:40:11 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:40:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:40:11 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:40:11 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:40:12 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:40:12 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:40:12 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:40:12 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:40:12 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:40:12 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:40:12 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:40:12 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:40:12 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:40:12 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:40:12 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:40:12 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:40:12 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:40:12 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:40:12 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:40:12 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:40:12 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:40:13 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 05:40:13 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:40:13 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:40:13 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:40:13 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:40:13 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:40:13 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:40:13 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:40:13 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:40:13 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:40:13 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:40:13 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 05:40:13 IQ138000 systemd-udevd[162]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:40:13 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:40:13 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:40:13 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:40:13 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:40:14 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:40:14 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:40:14 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:40:14 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:40:14 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:40:14 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:40:14 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:40:14 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:40:14 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:40:14 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:40:14 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:40:14 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:40:14 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:40:14 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:40:14 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 05:40:14 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 05:40:14 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:40:14 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:40:14 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:40:14 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:40:14 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:40:14 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:40:14 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:40:14 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:40:14 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:40:14 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:40:14 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:40:14 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:40:14 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:40:14 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:40:14 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:40:14 IQ138000 systemd-fsck[215]: data: recovering journal
Oct 11 05:40:14 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:40:14 IQ138000 systemd-fsck[215]: data: clean, 16457/328656 files, 361595/1313536 blocks
Oct 11 05:40:14 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:40:14 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:40:15 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:40:15 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:40:15 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:40:15 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:40:15 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:40:15 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:40:15 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:40:15 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 50.193ms for 461 entries.
Oct 11 05:40:15 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 458.3M, max 496.6M, 38.2M free.
Oct 11 05:40:15 IQ138000 kernel: random: crng init done
Oct 11 05:40:15 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:40:15 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:40:15 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:40:15 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 05:40:15 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:40:15 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:40:15 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:40:16 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:40:16 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:40:16 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:40:16 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:40:16 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:40:16 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:40:16 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:40:16 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:40:16 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:40:16 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:40:16 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:40:16 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:40:16 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:40:16 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:40:16 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:40:16 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:40:16 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:40:16 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:40:16 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:40:16 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:40:16 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:40:16 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:40:16 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:40:16 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:40:16 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:40:16 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:40:16 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:40:16 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:40:16 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:40:16 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:40:16 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 05:40:17 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:40:17 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:40:17 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 05:40:17 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:40:17 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:40:17 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:40:17 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:40:17 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:40:17 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 05:40:17 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:40:17 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:40:17 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 05:40:17 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:40:17 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:40:17 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:40:17 IQ138000 migrate.sh[320]: Error: No such file or directory
Oct 11 05:40:17 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:40:17 IQ138000 migrate.sh[331]: Error: No such file or directory
Oct 11 05:40:17 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:40:17 IQ138000 migrate.sh[342]: Error: No such file or directory
Oct 11 05:40:17 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:40:17 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Oct 11 05:40:17 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:40:17 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:40:17 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:40:17 IQ138000 migrate.sh[353]: Error: No such file or directory
Oct 11 05:40:17 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:40:17 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:40:17 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:40:17 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:40:17 IQ138000 migrate.sh[365]: Error: No such file or directory
Oct 11 05:40:17 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:40:17 IQ138000 rules-preprocessor[340]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:40:17 IQ138000 rules-preprocessor[340]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Successfully dropped root privileges.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: avahi-daemon 0.8 starting up.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Successfully called chroot().
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Successfully dropped remaining capabilities.
Oct 11 05:40:17 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: No service file found in /etc/avahi/services.
Oct 11 05:40:17 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Network interface enumeration completed.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Registering new address record for ::1 on lo.*.
Oct 11 05:40:17 IQ138000 avahi-daemon[366]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:40:17 IQ138000 wb-watch-configs[385]: Watched dirs: /etc /etc/network
Oct 11 05:40:17 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:40:17 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:40:17 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:40:17 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 05:40:17 IQ138000 wpa_supplicant[384]: Successfully initialized wpa_supplicant
Oct 11 05:40:17 IQ138000 systemd-logind[346]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:40:17 IQ138000 systemd-logind[346]: New seat seat0.
Oct 11 05:40:17 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:40:17 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:40:17 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:17 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:40:17 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:40:17 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:40:17 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:17 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:40:17 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:40:17 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:40:17 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:40:17 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:40:18 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:18 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:40:18 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:40:18 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:40:18 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:40:18 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:40:18 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:40:18 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:40:18 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:40:18 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:40:18 IQ138000 NetworkManager[406]: <info>  [1760161218.3763] NetworkManager (version 1.42.4) is starting... (boot:8d460246-a6c0-4e55-9fd2-31141b637b06)
Oct 11 05:40:18 IQ138000 NetworkManager[406]: <info>  [1760161218.3767] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:40:18 IQ138000 NetworkManager[406]: <info>  [1760161218.3956] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:40:18 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:40:18 IQ138000 avahi-daemon[366]: Server startup complete. Host name is IQ138000.local. Local service cookie is 2404159306.
Oct 11 05:40:18 IQ138000 monit[324]: Starting daemon monitor: monit.
Oct 11 05:40:18 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:40:18 IQ138000 NetworkManager[406]: <info>  [1760161218.4419] manager[0x676900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:40:18 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:40:18 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:40:18 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:40:18 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:40:18 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:40:18 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:40:18 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:40:18 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:40:18 IQ138000 ModemManager[485]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:40:19 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:40:19 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1157] hostname: hostname: using hostnamed
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1160] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1200] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1282] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1300] manager[0x676900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1302] manager[0x676900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1564] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1640] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1676] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.1972] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:40:19 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2084] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2102] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2107] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2115] manager: Networking is enabled by state file
Oct 11 05:40:19 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2205] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2207] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2209] ifupdown: management mode: unmanaged
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2210] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2211] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:40:19 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2761] dhcp: init: Using DHCP client 'internal'
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2793] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.2932] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.3007] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.3101] device (lo): Activation: starting connection 'lo' (1633fb20-42f1-43cf-ae2d-d80c39622020)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.3196] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.3239] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:19 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:40:19 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.6843] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.6869] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.6904] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.6953] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:40:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:40:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:40:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:40:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:40:19 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.9043] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.9192] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.9269] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:40:19 IQ138000 NetworkManager[406]: <info>  [1760161219.9296] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.7510] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.7549] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.7573] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8133] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8154] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8171] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8220] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8794] modem-manager: ModemManager available
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8806] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8855] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:40:20 IQ138000 NetworkManager[406]: <info>  [1760161220.8905] device (lo): Activation: successful, device activated.
Oct 11 05:40:21 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.1824] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.1841] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.1874] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.1908] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2075] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2092] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2126] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2155] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2201] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2252] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2285] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:40:21 IQ138000 NetworkManager[406]: <info>  [1760161221.2340] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:22 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:40:22 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:40:22 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:40:24 IQ138000 init.sh[1321]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:40:24 IQ138000 init.sh[1336]: In file included from -:16:
Oct 11 05:40:24 IQ138000 init.sh[1336]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:24 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:40:25 IQ138000 init.sh[1321]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:40:25 IQ138000 init.sh[1321]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:40:25 IQ138000 init.sh[1396]: In file included from -:11:
Oct 11 05:40:25 IQ138000 init.sh[1396]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:25 IQ138000 init.sh[1321]: ...
Oct 11 05:40:25 IQ138000 init.sh[1411]: In file included from -:11:
Oct 11 05:40:25 IQ138000 init.sh[1411]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:25 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 05:40:25 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 05:40:25 IQ138000 init.sh[1321]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:40:26 IQ138000 init.sh[1431]: In file included from -:24:
Oct 11 05:40:26 IQ138000 init.sh[1431]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:26 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:40:26 IQ138000 init.sh[1321]: ...
Oct 11 05:40:26 IQ138000 init.sh[1446]: In file included from -:24:
Oct 11 05:40:26 IQ138000 init.sh[1446]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:26 IQ138000 init.sh[1321]: failsafe bias enabled
Oct 11 05:40:26 IQ138000 init.sh[1321]: terminators are enabled
Oct 11 05:40:26 IQ138000 init.sh[1321]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:40:26 IQ138000 init.sh[1468]: In file included from -:11:
Oct 11 05:40:26 IQ138000 init.sh[1468]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:26 IQ138000 init.sh[1321]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:40:27 IQ138000 init.sh[1492]: In file included from -:11:
Oct 11 05:40:27 IQ138000 init.sh[1492]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:40:27 IQ138000 init.sh[1321]: ...
Oct 11 05:40:27 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:40:27 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:40:27 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:40:27 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:40:27 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:40:27 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:40:27 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:40:27 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:40:27 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:40:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:40:27 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:40:27 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:40:27 IQ138000 knxd[1606]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:40:27 IQ138000 knxd[1606]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:40:27 IQ138000 lsyncd[1611]: 05:40:27 Normal: --- Startup ---
Oct 11 05:40:27 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:40:27 IQ138000 lsyncd[1611]: 05:40:27 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:40:27 IQ138000 lsyncd[1611]: messages
Oct 11 05:40:27 IQ138000 lsyncd[1611]: iq_network_manager/iq_network_manager.log
Oct 11 05:40:27 IQ138000 lsyncd[1611]: journal
Oct 11 05:40:27 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:40:27 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:40:28 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:40:28 IQ138000 ntpd[1623]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:40:28 IQ138000 ntpd[1623]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:40:28 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 05:40:28 IQ138000 ntpd[1623]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:40:28 IQ138000 ntpd[1623]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:40:28 IQ138000 ntpd[1623]: corporation.  Support and training for ntp-4 are
Oct 11 05:40:28 IQ138000 ntpd[1623]: available at https://www.nwtime.org/support
Oct 11 05:40:28 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 05:40:28 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:40:28 IQ138000 lsyncd[1634]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:40:28 IQ138000 lsyncd[1624]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:40:28 IQ138000 lsyncd[1624]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:40:28 IQ138000 lsyncd[1611]: 05:40:28 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:40:28 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:40:28 IQ138000 ntpd[1646]: proto: precision = 1.000 usec (-20)
Oct 11 05:40:28 IQ138000 ntpd[1646]: basedate set to 2020-09-11
Oct 11 05:40:28 IQ138000 persist_meter_data.sh[1647]: Error: No such file or directory
Oct 11 05:40:28 IQ138000 ntpd[1646]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:40:28 IQ138000 ntpd[1646]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:40:28 IQ138000 ntpd[1646]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:40:28 IQ138000 ntpd[1646]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:40:28 IQ138000 ntpd[1646]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:40:28 IQ138000 ntpd[1646]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:40:28 IQ138000 ntpd[1646]: Listen normally on 3 lo [::1]:123
Oct 11 05:40:28 IQ138000 ntpd[1646]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:40:28 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:40:28 IQ138000 wb-knxd-config.sh[1522]: No /dev/ttyKNX found, disabling level2
Oct 11 05:40:28 IQ138000 wb-knxd-config.sh[1522]: Restart knxd
Oct 11 05:40:28 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:40:28 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:40:28 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:40:28 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:40:28 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:40:28 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:40:28 IQ138000 wb-mqtt-w1[1691]: MQTT broker localhost:1883
Oct 11 05:40:28 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:40:28 IQ138000 wb-mqtt-w1[1691]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:28 IQ138000 wb-mqtt-w1[1691]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:40:28 IQ138000 wb-mqtt-w1[1691]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:40:28 IQ138000 wb-mqtt-w1[1691]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:40:28 IQ138000 wb-connection-manager[1509]: Connection LegacyWiFi not found, skipping
Oct 11 05:40:28 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:40:28 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:40:28 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:40:28 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:40:28 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:40:28 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:40:28 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:40:28 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:40:28 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:28 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:40:28 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:40:28 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:40:28 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:40:28 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:28 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:40:29 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:40:29 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:40:29 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:40:29 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:40:29 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:40:29 IQ138000 ntpd[1646]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:40:29 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:40:29 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:40:29 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:40:29 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:40:29 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:40:29 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:40:29 IQ138000 vnstatd[1660]: Info: vnStat daemon 2.6 started. (pid:1660 uid:110 gid:117 64-bit)
Oct 11 05:40:29 IQ138000 vnstatd[1660]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:40:29 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:40:29 IQ138000 vnstatd[1660]: Info: Interface "ppp0" disabled.
Oct 11 05:40:29 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:40:29 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:29 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:40:29 IQ138000 sshd[1749]: Server listening on 0.0.0.0 port 22.
Oct 11 05:40:29 IQ138000 sshd[1749]: Server listening on :: port 22.
Oct 11 05:40:29 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:40:29 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:40:29 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:40:29 IQ138000 NetworkManager[406]: <error> [1760161229.5807] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:40:29 IQ138000 NetworkManager[406]: <info>  [1760161229.5810] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1509 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:40:29 IQ138000 wb-connection-manager[1509]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:40:29 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:40:29 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:40:29 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:40:29 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:40:29 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:40:29 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:40:29 IQ138000 reverse-ssh.sh[1853]: Error: No such file or directory
Oct 11 05:40:29 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:29 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:40:29 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:40:29 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:40:30 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:30 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:40:30 IQ138000 ntpd[1646]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1281] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1287] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1509 uid=0 result="success"
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1294] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1338] manager: NetworkManager state is now CONNECTING
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1418] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1442] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1444] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1802] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.1988] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.2008] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.2013] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.2014] Config: added 'scan_ssid' value '1'
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.2016] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.2017] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:40:30 IQ138000 NetworkManager[406]: <info>  [1760161230.2018] Config: added 'psk' value '<hidden>'
Oct 11 05:40:30 IQ138000 wb-adjust-systime[1851]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:40:30 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:40:30 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:40:30 IQ138000 wb-adjust-systime[1851]: Drift file is valid (was recently edited)
Oct 11 05:40:30 IQ138000 mosquitto[1895]: 1760161230: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:40:30 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:40:30 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:40:30 IQ138000 knxd[1914]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:40:30 IQ138000 knxd[1914]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:40:30 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:40:30 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:40:30 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:40:30 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:40:30 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:40:30 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:40:30 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:40:30 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: MQTT broker localhost:1883
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:31 IQ138000 ntpd[1646]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:40:31 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:40:31 IQ138000 wb-mqtt-logs[1991]: MQTT broker localhost:1883
Oct 11 05:40:31 IQ138000 wb-mqtt-logs[1991]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:31 IQ138000 wb-mqtt-logs[1991]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: INFO: [sqlite] Create indices if necessary
Oct 11 05:40:31 IQ138000 wb-mqtt-db[1975]: INFO: [sqlite] Analyzing data table
Oct 11 05:40:31 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:40:31 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:40:31 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:40:31 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:40:31 IQ138000 wb-mqtt-iec104[1985]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:40:32 IQ138000 ntpd[1646]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:40:32 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:40:32 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.542s CPU time.
Oct 11 05:40:32 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:40:32 IQ138000 wb-mqtt-confed[1970]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:40:32 IQ138000 wb-mqtt-confed[1970]: INFO: [wbgo_mqtt] confed-IQ138000-1970: MQTT connection established
Oct 11 05:40:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:40:32 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:32 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:40:32 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:40:32 IQ138000 NetworkManager[406]: <info>  [1760161232.5500] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:40:32 IQ138000 NetworkManager[406]: <info>  [1760161232.5503] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:40:32 IQ138000 wb-mqtt-opcua[2031]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:40:32 IQ138000 wb-mqtt-iec104[2149]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:40:32 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:40:32 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:40:33 IQ138000 wb-mqtt-logs[1991]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:33 IQ138000 wb-mqtt-logs[1991]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:33 IQ138000 wb-mqtt-logs[1991]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:33 IQ138000 wb-mqtt-logs[1991]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:40:33 IQ138000 wb-mqtt-gpio[1865]: INFO: [gpio driver] Started
Oct 11 05:40:33 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:40:33 IQ138000 wb-mqtt-knx[2168]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:33 IQ138000 wb-mqtt-knx[2168]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:33 IQ138000 wb-mqtt-opcua[2235]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:40:33 IQ138000 wb-mqtt-iec104[2149]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:40:33 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:40:33 IQ138000 wb-mqtt-mbgate[2003]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:40:33 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:40:33 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:40:33 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:40:33 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:40:33 IQ138000 wb-mqtt-opcua[2235]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:40:33 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:40:34 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:34 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:40:34 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:40:35 IQ138000 wb-mqtt-knx[2168]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:35 IQ138000 wb-mqtt-knx[2168]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:35 IQ138000 wb-mqtt-knx[2168]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:35 IQ138000 wb-mqtt-knx[2168]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:40:35 IQ138000 wb-mqtt-knx[2168]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:40:35 IQ138000 python3[1950]: No data file found at /tmp/network_status_cache.json
Oct 11 05:40:35 IQ138000 python3[1950]: Connecting to MQTT
Oct 11 05:40:36 IQ138000 python3[1950]: Connected to MQTT
Oct 11 05:40:36 IQ138000 python3[1950]: Connection returned result: Connection Accepted.
Oct 11 05:40:36 IQ138000 wpa_supplicant[384]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:40:38 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2027 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:40:38 IQ138000 wb-device-manager[1955]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:40:38 IQ138000 wb-device-manager[1955]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New virtual device lo 1633fb20-42f1-43cf-ae2d-d80c39622020 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:40:38 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New active connection lo 1633fb20-42f1-43cf-ae2d-d80c39622020 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:40:38 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:38 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:39 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:40:39 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:40:39 IQ138000 kernel: dldo4: disabling
Oct 11 05:40:39 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:40:39 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:40:39 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: MQTT broker localhost:1883
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:40:40 IQ138000 wb-mqtt-adc[3085]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:40:40 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:40:40 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:40:40 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:40:40 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:40:40 IQ138000 wb-mqtt-confed[1970]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-db[1975]: INFO: [sqlite] DB initialization is done
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:40:41 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:40:42 IQ138000 wb-gsm[3323]: main: Called from pid 1 (systemd)
Oct 11 05:40:42 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:40:42 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:40:42 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:40:42 IQ138000 wb-mqtt-serial[1679]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:40:42 IQ138000 wb-usb-otg-start.sh[3375]: : wb-usb-otg-start
Oct 11 05:40:42 IQ138000 wb-usb-otg-start.sh[3375]: main: setup_device()
Oct 11 05:40:42 IQ138000 wb-gsm[3361]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:40:42 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:42 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:40:42 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:40:42 IQ138000 knxd[3382]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:40:42 IQ138000 knxd[3382]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:40:42 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:40:42 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:42 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:40:42 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:40:42 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:40:42 IQ138000 kernel: using random self ethernet address
Oct 11 05:40:42 IQ138000 kernel: using random host ethernet address
Oct 11 05:40:42 IQ138000 wb-usb-otg-start.sh[3375]: main: enabling profile rndis
Oct 11 05:40:42 IQ138000 wb-gsm[3437]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:40:42 IQ138000 systemd-udevd[3388]: Using default interface naming scheme 'v247'.
Oct 11 05:40:42 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:40:42 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:40:42 IQ138000 NetworkManager[406]: <info>  [1760161242.9447] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:40:42 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:40:43 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:40:43 IQ138000 NetworkManager[406]: <info>  [1760161243.1381] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:40:43 IQ138000 wb-gsm[3500]: should_enable: Should enable GSM modem
Oct 11 05:40:43 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:40:43 IQ138000 wb-mqtt-db[1975]: INFO: DB logger started, go to main loop
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:40:43 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:43 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:43 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:40:43 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:40:44 IQ138000 wb-gsm[3579]: main: Called from pid 3501 (wb-gsm-mm)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:40:44 IQ138000 wb-gsm[3590]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:40:44 IQ138000 wb-mqtt-db[1975]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:40:44 IQ138000 wb-gsm[3614]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:40:44 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:40:44 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:40:45 IQ138000 npm[1699]: > zigbee2mqtt@2.1.1 start
Oct 11 05:40:45 IQ138000 npm[1699]: > node index.js
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:40:45 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:40:45 IQ138000 ModemManager[485]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:40:46 IQ138000 python3[1950]: Выполнение: service wb-connection-manager stop
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:40:46 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:40:47 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:40:48 IQ138000 npm[3679]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:48 IQ138000 wb-gsm[3999]: mm_off: Modem is already OFF
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:40:48 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-gsm[4069]: main: Called from pid 3501 (wb-gsm-mm)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:40:49 IQ138000 wb-gsm[4080]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:40:49 IQ138000 wb-gsm[4103]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:40:49 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:50 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:40:50 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:50 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:40:51 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:51 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:40:51 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:51 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:40:51 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:40:52 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:40:53 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:40:53 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:53 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:53 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:40:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:53 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:53 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:40:53 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:40:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:40:53 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:40:53 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:40:53 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:40:53 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:40:53 IQ138000 knxd[4502]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:40:53 IQ138000 knxd[4502]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:40:53 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:40:53 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:40:53 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:40:53 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: MQTT broker localhost:1883
Oct 11 05:40:53 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:40:53 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:40:53 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:53 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:40:53 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.186s CPU time.
Oct 11 05:40:53 IQ138000 python3[1950]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:40:53 IQ138000 python3[1950]:  
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: w1 thread Started
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:40:53 IQ138000 wb-mqtt-w1[4510]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:40:54 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <warn>  [1760161255.5292] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <info>  [1760161255.5294] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <info>  [1760161255.5313] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <warn>  [1760161255.5331] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <info>  [1760161255.5343] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <info>  [1760161255.5650] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:40:55 IQ138000 NetworkManager[406]: <info>  [1760161255.5652] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:40:55 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:40:55 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:40:56 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:40:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:40:56 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:40:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:56 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:40:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:40:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:40:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:57 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:40:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:40:58 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 05:40:58 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:40:58 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:40:59 IQ138000 NetworkManager[406]: <info>  [1760161259.0886] manager: startup complete
Oct 11 05:40:59 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:40:59 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:40:59 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:40:59 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:40:59 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:40:59 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:40:59 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:40:59 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:40:59 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:40:59 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:40:59 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:40:59 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:40:59 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:40:59 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:40:59 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:40:59 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:40:59 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:40:59 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:40:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:40:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:40:59 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:40:59 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:40:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 05:40:59 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:40:59 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:40:59 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:40:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:40:59 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:00 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:41:00 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:00 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:00 IQ138000 watchdog[4636]: starting daemon (5.16):
Oct 11 05:41:00 IQ138000 watchdog[4636]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:41:00 IQ138000 watchdog[4636]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:41:00 IQ138000 watchdog[4636]:  ping: no machine to check
Oct 11 05:41:00 IQ138000 watchdog[4636]:  file: no file to check
Oct 11 05:41:00 IQ138000 watchdog[4636]:  pidfile: /var/run/sshd.pid
Oct 11 05:41:00 IQ138000 watchdog[4636]:  interface: no interface to check
Oct 11 05:41:00 IQ138000 watchdog[4636]:  temperature: no sensors to check
Oct 11 05:41:00 IQ138000 watchdog[4636]:  no test binary files
Oct 11 05:41:00 IQ138000 watchdog[4636]:  no repair binary files
Oct 11 05:41:00 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:41:00 IQ138000 watchdog[4636]:  error retry time-out = 30 seconds
Oct 11 05:41:00 IQ138000 watchdog[4636]:  repair attempts = 1
Oct 11 05:41:00 IQ138000 watchdog[4636]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:41:00 IQ138000 watchdog[4636]: watchdog now set to 120 seconds
Oct 11 05:41:00 IQ138000 watchdog[4636]: hardware watchdog identity: WBEC WDT
Oct 11 05:41:00 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:41:00 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:41:00 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:41:00 IQ138000 systemd[1]: Startup finished in 3.794s (kernel) + 50.958s (userspace) = 54.752s.
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:41:00 IQ138000 wb-rules[4586]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:41:00 IQ138000 wb-rules[4586]: INFO: driver is created
Oct 11 05:41:00 IQ138000 wb-rules[4586]: INFO: [wbgo_mqtt] rules-IQ138000-4586: MQTT connection established
Oct 11 05:41:00 IQ138000 wb-rules[4586]: INFO: driver loop is started
Oct 11 05:41:00 IQ138000 wb-rules[4586]: INFO: wait for driver to become ready
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 8 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:00 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:01 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:01 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:02 IQ138000 wb-rules[4586]: INFO: driver is ready
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:41:02 IQ138000 wb-rules[4586]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:41:02 IQ138000 wb-rules[4586]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4586: MQTT connection established
Oct 11 05:41:02 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:02 IQ138000 wb-rules[4586]: INFO: [engine] Starting sync loop
Oct 11 05:41:02 IQ138000 wb-rules[4586]: INFO: [engine] Starting main loop
Oct 11 05:41:02 IQ138000 wb-rules[4586]: INFO: the engine is ready
Oct 11 05:41:02 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:41:02 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:02 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:41:02 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:41:02 IQ138000 NetworkManager[406]: <info>  [1760161262.8535] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:41:02 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, aa:37:f7:34:33:54
Oct 11 05:41:02 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:41:02 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:41:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:41:02 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:41:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:41:02 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:41:02 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:41:02 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:41:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:41:02 IQ138000 systemd-udevd[4724]: Using default interface naming scheme 'v247'.
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 systemd-udevd[4724]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:03 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:41:03 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:41:03 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:41:03 IQ138000 wb-rules[4586]: WARNING: [rule warning] DAC: no config file
Oct 11 05:41:03 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 knxd[4933]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:41:04 IQ138000 knxd[4933]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:41:04 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:41:04 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:41:04 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:04 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:41:05 IQ138000 wb-gsm[5007]: mm_on: Waiting for modem to start
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:05 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:41:05 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:41:05 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:41:06 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:41:06 IQ138000 python3[1950]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:41:06 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:41:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:41:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 05:41:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:06 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:06 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 4 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:07 IQ138000 wb-rules[4586]: INFO: all rule files are loaded
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:07 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wpa_supplicant[384]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 17432 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:08 IQ138000 npm[3679]: [2025-10-11 05:41:08] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 npm[3679]: [2025-10-11 05:41:09] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:41:09 IQ138000 npm[3679]: [2025-10-11 05:41:09] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:09 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:41:10 IQ138000 npm[3679]: [2025-10-11 05:41:10] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:41:10 IQ138000 npm[3679]: [2025-10-11 05:41:10] info:         zh:zstack:znp: Serialport opened
Oct 11 05:41:10 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:10 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:11 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:41:11 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:41:12 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:41:12 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:41:13 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: Currently 4 devices are joined.
Oct 11 05:41:13 IQ138000 npm[3679]: [2025-10-11 05:41:13] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m: Connected to MQTT server
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:41:14 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:41:14 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:41:14.238+00:00
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:41:14 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:41:14.238Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161454261,"cmd_timestamp_ms":1760161274261,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161454261,"cmd_timestamp_ms":1760161274261,"source":"schedule"}
Oct 11 05:41:14 IQ138000 knxd[5131]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:41:14 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:41:14 IQ138000 knxd[5131]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:41:14 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:41:14 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:41:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:14 IQ138000 wb-rules[4586]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:41:14 IQ138000 wb-rules[4586]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:41:14 IQ138000 wb-rules[4586]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:41:14 IQ138000 wb-rules[4586]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:41:14.444+00:00
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:41:14.444Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161454463,"cmd_timestamp_ms":1760161274463,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161454463,"cmd_timestamp_ms":1760161274463,"source":"schedule"}
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m: Started frontend on port 8282
Oct 11 05:41:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:41:14 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:14 IQ138000 npm[3679]: [2025-10-11 05:41:14] info:         z2m: Zigbee2MQTT started!
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:41:14.562+00:00
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:41:14.562Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161454580,"cmd_timestamp_ms":1760161274580,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161454580,"cmd_timestamp_ms":1760161274580,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:41:14.844+00:00
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:41:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:41:14.844Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161454863,"cmd_timestamp_ms":1760161274863,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161454863,"cmd_timestamp_ms":1760161274863,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:41:14.972+00:00
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:41:14.972Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161454983,"cmd_timestamp_ms":1760161274983,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161454983,"cmd_timestamp_ms":1760161274983,"source":"schedule"}
Oct 11 05:41:14 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:41:15.161+00:00
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:41:15.161Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161455175,"cmd_timestamp_ms":1760161275175,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161455175,"cmd_timestamp_ms":1760161275175,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:41:15.377+00:00
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:41:15.377Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161455413,"cmd_timestamp_ms":1760161275413,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161455413,"cmd_timestamp_ms":1760161275413,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:41:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:41:15.525+00:00
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:41:15.525Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:41:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161455538,"cmd_timestamp_ms":1760161275538,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161455538,"cmd_timestamp_ms":1760161275538,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:41:15 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:41:15.900+00:00
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:41:15.900Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161455914,"cmd_timestamp_ms":1760161275914,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161455914,"cmd_timestamp_ms":1760161275914,"source":"schedule"}
Oct 11 05:41:15 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:41:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:41:16.069+00:00
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:41:16.069Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161456087,"cmd_timestamp_ms":1760161276087,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161456087,"cmd_timestamp_ms":1760161276087,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:41:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:41:16.238+00:00
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:41:16.238Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161456257,"cmd_timestamp_ms":1760161276257,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161456257,"cmd_timestamp_ms":1760161276257,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:41:16.377+00:00
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:41:16.377Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161456386,"cmd_timestamp_ms":1760161276386,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161456386,"cmd_timestamp_ms":1760161276386,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:41:16.553+00:00
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:41:16.553Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161456574,"cmd_timestamp_ms":1760161276574,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161456574,"cmd_timestamp_ms":1760161276574,"source":"schedule"}
Oct 11 05:41:16 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:41:16.695+00:00
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:41:16.695Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161456704,"cmd_timestamp_ms":1760161276704,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161456704,"cmd_timestamp_ms":1760161276704,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:41:16.961+00:00
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:41:16.961Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161456975,"cmd_timestamp_ms":1760161276975,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161456975,"cmd_timestamp_ms":1760161276975,"source":"schedule"}
Oct 11 05:41:16 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-watchdog[5250]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:41:17 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:17 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:41:17 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:41:17 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:41:17 IQ138000 wb-rules[4586]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:41:18 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 9494 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:18 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:19 IQ138000 wb-mqtt-serial[1679]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:41:19 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:20 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:22 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:23 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:23 IQ138000 ModemManager[485]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:41:23 IQ138000 ModemManager[485]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:41:24 IQ138000 ModemManager[485]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:41:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:24 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:24 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:41:24 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:41:24 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:41:24 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:41:24 IQ138000 knxd[5370]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:41:24 IQ138000 knxd[5370]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:41:24 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:41:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:41:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:41:24 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:24 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:41:25 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:41:25 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:41:25 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:41:25 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:41:25 IQ138000 ModemManager[485]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:41:25 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:25 IQ138000 ModemManager[485]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7276] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7342] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7395] device (ttyUSB1): modem state 'enabling'
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7427] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7455] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7499] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7506] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:25 IQ138000 NetworkManager[406]: <info>  [1760161285.7540] manager: NetworkManager state is now CONNECTING
Oct 11 05:41:25 IQ138000 ModemManager[485]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:41:25 IQ138000 wb-mqtt-nm-helper[2027]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:41:25 IQ138000 ModemManager[485]: <info>  [modem0] power state updated: on
Oct 11 05:41:26 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:26 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:41:26 IQ138000 python3[1950]:    --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:41:26 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:41:26 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 05:41:26 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:41:26 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 05:41:26 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 05:41:26 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 05:41:26 IQ138000 python3[1950]:            |              drivers: option, rndis_host
Oct 11 05:41:26 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 05:41:26 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 05:41:26 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:41:26 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:41:26 IQ138000 python3[1950]:            |                state: enabling
Oct 11 05:41:26 IQ138000 python3[1950]:            |          power state: on
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:41:26 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:41:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:26 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:26 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:41:26 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 05:41:26 IQ138000 python3[1950]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:41:26 IQ138000 python3[1950]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:41:26 IQ138000 python3[1950]:  successfully requested primary SIM switch in modem
Oct 11 05:41:28 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:41:28 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:41:28 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:41:29 IQ138000 lsyncd[5422]: 05:41:29 Normal: --- Startup ---
Oct 11 05:41:29 IQ138000 lsyncd[5422]: 05:41:29 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:41:29 IQ138000 lsyncd[5422]: iq_network_manager/iq_network_manager.log
Oct 11 05:41:29 IQ138000 lsyncd[5422]: journal
Oct 11 05:41:29 IQ138000 lsyncd[5422]: messages
Oct 11 05:41:29 IQ138000 lsyncd[5424]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:41:29 IQ138000 lsyncd[5423]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:41:29 IQ138000 lsyncd[5423]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:41:29 IQ138000 lsyncd[5422]: 05:41:29 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:41:29 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:41:29 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:41:29 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 4 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:29 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:41:29 IQ138000 wb-rules[4586]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:41:29 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] simple connect started...
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:41:30 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 17 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:41:30 IQ138000 NetworkManager[406]: <info>  [1760161290.5274] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:30 IQ138000 NetworkManager[406]: <info>  [1760161290.5287] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:41:30 IQ138000 NetworkManager[406]: <info>  [1760161290.5322] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:41:30 IQ138000 NetworkManager[406]: <info>  [1760161290.5347] ppp-manager: starting PPP connection
Oct 11 05:41:30 IQ138000 NetworkManager[406]: <info>  [1760161290.5488] ppp-manager: pppd started with pid 5435
Oct 11 05:41:30 IQ138000 pppd[5435]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:41:30 IQ138000 NetworkManager[5435]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: initializing
Oct 11 05:41:30 IQ138000 pppd[5435]: pppd 2.4.9 started by root, uid 0
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:41:30 IQ138000 NetworkManager[5435]: Using interface ppp0
Oct 11 05:41:30 IQ138000 NetworkManager[5435]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:41:30 IQ138000 pppd[5435]: Using interface ppp0
Oct 11 05:41:30 IQ138000 pppd[5435]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:41:30 IQ138000 NetworkManager[406]: <info>  [1760161290.6193] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:41:30 IQ138000 pppd[5435]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:41:30 IQ138000 NetworkManager[5435]: PAP authentication succeeded
Oct 11 05:41:30 IQ138000 NetworkManager[5435]: kernel does not support PPP filtering
Oct 11 05:41:30 IQ138000 pppd[5435]: PAP authentication succeeded
Oct 11 05:41:30 IQ138000 pppd[5435]: kernel does not support PPP filtering
Oct 11 05:41:30 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:41:30 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:41:30 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:30 IQ138000 ModemManager[485]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:41:30 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:41:30 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:31 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:41:31 IQ138000 pppd[5435]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:41:31 IQ138000 NetworkManager[5435]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:41:31 IQ138000 pppd[5435]: local  IP address 10.165.218.218
Oct 11 05:41:31 IQ138000 NetworkManager[5435]: local  IP address 10.165.218.218
Oct 11 05:41:31 IQ138000 NetworkManager[5435]: remote IP address 10.64.64.64
Oct 11 05:41:31 IQ138000 NetworkManager[5435]: primary   DNS address 172.23.10.131
Oct 11 05:41:31 IQ138000 NetworkManager[5435]: secondary DNS address 172.23.10.130
Oct 11 05:41:31 IQ138000 pppd[5435]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:41:31 IQ138000 pppd[5435]: remote IP address 10.64.64.64
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.1610] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:41:31 IQ138000 pppd[5435]: primary   DNS address 172.23.10.131
Oct 11 05:41:31 IQ138000 pppd[5435]: secondary DNS address 172.23.10.130
Oct 11 05:41:31 IQ138000 pppd[5435]: nm-ppp-plugin: ip-up event
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.1696] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:41:31 IQ138000 pppd[5435]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.1719] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.1767] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.1790] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:41:31 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:41:31 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 15 coil(s) @ 5117 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.2209] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:31 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=406 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:41:31 IQ138000 wb-rules[4586]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:41:31 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:41:31 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:41:31 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.3288] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.3299] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.3317] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.3333] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:41:31 IQ138000 NetworkManager[406]: <info>  [1760161291.3362] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:41:31 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:32 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:33 IQ138000 ntpd[1646]: Listen normally on 4 ppp0 10.165.218.218:123
Oct 11 05:41:33 IQ138000 ntpd[1646]: new interface(s) found: waking up resolver
Oct 11 05:41:33 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:33 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:41:34 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:41:34 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:41:34 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:41:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:41:34 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:41:34 IQ138000 wb-mqtt-knx[2168]: INFO: knxd connected successfully
Oct 11 05:41:35 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:41:35 IQ138000 vnstatd[1660]: Info: Interface "ppp0" enabled.
Oct 11 05:41:35 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:41:35 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:41:35 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:41:36 IQ138000 python3[1950]: Выполнение: mmcli -i any
Oct 11 05:41:36 IQ138000 python3[1950]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:41:36 IQ138000 python3[1950]:    -------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:36 IQ138000 python3[1950]:   -------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 05:41:36 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 05:41:36 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 05:41:36 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 05:41:36 IQ138000 python3[1950]:              |     operator name: Beeline
Oct 11 05:41:36 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 05:41:36 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:41:36 IQ138000 python3[1950]:    --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:41:36 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:41:36 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 05:41:36 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:41:36 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 05:41:36 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 05:41:36 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 05:41:36 IQ138000 python3[1950]:            |              drivers: option, rndis_host
Oct 11 05:41:36 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 05:41:36 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 05:41:36 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:41:36 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:41:36 IQ138000 python3[1950]:            |                state: connected
Oct 11 05:41:36 IQ138000 python3[1950]:            |          power state: on
Oct 11 05:41:36 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 05:41:36 IQ138000 python3[1950]:            |       signal quality: 90% (recent)
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:41:36 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 05:41:36 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 05:41:36 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 05:41:36 IQ138000 python3[1950]:            |         registration: home
Oct 11 05:41:36 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:36 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:41:36 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:41:36 IQ138000 python3[1950]: Current state: home
Oct 11 05:41:36 IQ138000 python3[1950]: SIM registered in the network.
Oct 11 05:41:36 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 05:41:36 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:41:36 IQ138000 python3[1950]:    --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:41:36 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:41:36 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 05:41:36 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:41:36 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 05:41:36 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 05:41:36 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 05:41:36 IQ138000 python3[1950]:            |              drivers: option, rndis_host
Oct 11 05:41:36 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 05:41:36 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 05:41:36 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:41:36 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:41:36 IQ138000 python3[1950]:            |                state: connected
Oct 11 05:41:36 IQ138000 python3[1950]:            |          power state: on
Oct 11 05:41:36 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 05:41:36 IQ138000 python3[1950]:            |       signal quality: 90% (recent)
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:41:36 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 05:41:36 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 05:41:36 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 05:41:36 IQ138000 python3[1950]:            |         registration: home
Oct 11 05:41:36 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:36 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:41:36 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 05:41:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:41:36 IQ138000 python3[1950]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:36 IQ138000 python3[1950]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:41:36 IQ138000 python3[1950]:    -------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:36 IQ138000 python3[1950]:   -------------------------------
Oct 11 05:41:36 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 05:41:36 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 05:41:36 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 05:41:36 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 05:41:36 IQ138000 python3[1950]:              |     operator name: Beeline
Oct 11 05:41:37 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:41:38 IQ138000 ntpd[1646]: Soliciting pool server 93.95.100.85
Oct 11 05:41:38 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:38 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:39 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:39 IQ138000 ntpd[1646]: Soliciting pool server 212.113.99.6
Oct 11 05:41:39 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:40 IQ138000 ntpd[1646]: Soliciting pool server 185.188.183.188
Oct 11 05:41:40 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:40 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:41:41 IQ138000 ntpd[1646]: Soliciting pool server 217.69.139.133
Oct 11 05:41:41 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 05:41:41 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:41:41 IQ138000 python3[1950]:    --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:41:41 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:41:41 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 05:41:41 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:41:41 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 05:41:41 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 05:41:41 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 05:41:41 IQ138000 python3[1950]:            |              drivers: option, rndis_host
Oct 11 05:41:41 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 05:41:41 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 05:41:41 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:41:41 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:41:41 IQ138000 python3[1950]:            |                state: connected
Oct 11 05:41:41 IQ138000 python3[1950]:            |          power state: on
Oct 11 05:41:41 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 05:41:41 IQ138000 python3[1950]:            |       signal quality: 90% (recent)
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:41:41 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 05:41:41 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 05:41:41 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 05:41:41 IQ138000 python3[1950]:            |         registration: home
Oct 11 05:41:41 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:41 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:41:41 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 05:41:41 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:41:41 IQ138000 python3[1950]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:41 IQ138000 python3[1950]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:41:41 IQ138000 python3[1950]:    -------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:41 IQ138000 python3[1950]:   -------------------------------
Oct 11 05:41:41 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 05:41:41 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 05:41:41 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 05:41:41 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 05:41:41 IQ138000 python3[1950]:              |     operator name: Beeline
Oct 11 05:41:42 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:41:42 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:41:42 IQ138000 wb-mqtt-serial[1679]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:41:42 IQ138000 wb-mqtt-serial[1679]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:41:42 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:43 IQ138000 ntpd[1646]: Soliciting pool server 92.255.126.12
Oct 11 05:41:43 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:43 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:41:43 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:44 IQ138000 ntpd[1646]: Soliciting pool server 90.188.21.203
Oct 11 05:41:44 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:45 IQ138000 ntpd[1646]: Soliciting pool server 195.90.182.235
Oct 11 05:41:45 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:41:45 IQ138000 wb-mqtt-serial[1679]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:41:45 IQ138000 wb-mqtt-serial[1679]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:41:46 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 05:41:47 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:41:47 IQ138000 python3[1950]:    --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:41:47 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:41:47 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 05:41:47 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:41:47 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 05:41:47 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 05:41:47 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 05:41:47 IQ138000 python3[1950]:            |              drivers: option, rndis_host
Oct 11 05:41:47 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 05:41:47 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 05:41:47 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:41:47 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:41:47 IQ138000 python3[1950]:            |                state: connected
Oct 11 05:41:47 IQ138000 python3[1950]:            |          power state: on
Oct 11 05:41:47 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 05:41:47 IQ138000 python3[1950]:            |       signal quality: 96% (recent)
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:41:47 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 05:41:47 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 05:41:47 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 05:41:47 IQ138000 python3[1950]:            |         registration: home
Oct 11 05:41:47 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:47 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:41:47 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 05:41:47 IQ138000 python3[1950]:   --------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:41:47 IQ138000 python3[1950]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:47 IQ138000 python3[1950]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:41:47 IQ138000 python3[1950]:    -------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:41:47 IQ138000 python3[1950]:   -------------------------------
Oct 11 05:41:47 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 05:41:47 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 05:41:47 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 05:41:47 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 05:41:47 IQ138000 python3[1950]:              |     operator name: Beeline
-- Boot 9323a6461eb24afd8016ca83eaa8dda6 --
Oct 11 05:45:43 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:45:43 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:45:43 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:45:43 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:45:43 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:45:43 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:45:43 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:45:43 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:45:43 IQ138000 kernel: Zone ranges:
Oct 11 05:45:43 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:45:43 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:45:43 IQ138000 kernel: Movable zone start for each node
Oct 11 05:45:43 IQ138000 kernel: Early memory node ranges
Oct 11 05:45:43 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:45:43 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:45:43 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:45:43 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:45:43 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:45:43 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:45:43 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:45:43 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:45:43 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:45:43 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:45:43 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:45:43 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:45:43 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:45:43 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:45:43 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:45:43 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:45:43 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:45:43 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:45:43 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:45:43 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:45:43 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:45:43 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:45:43 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:45:43 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:45:43 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:45:43 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:45:43 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:45:43 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:45:43 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:45:43 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:45:43 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:45:43 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:45:43 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:45:43 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:45:43 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:45:43 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:45:43 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:45:43 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:45:43 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:45:43 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:45:43 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:45:43 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:45:43 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:45:43 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:45:43 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:45:43 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:45:43 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:45:43 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:45:43 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:45:43 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:45:43 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:45:43 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:45:43 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:45:43 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:45:43 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:45:43 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:45:43 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:45:43 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:45:43 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:45:43 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:45:43 IQ138000 kernel: No ATAGs?
Oct 11 05:45:43 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:45:43 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:45:43 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:45:43 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:45:43 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:45:43 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:45:43 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:45:43 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:45:43 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:45:43 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:45:43 IQ138000 kernel: PTP clock support registered
Oct 11 05:45:43 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:45:43 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:45:43 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:45:43 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:45:43 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:45:43 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:45:43 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:45:43 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:45:43 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:45:43 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:45:43 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:45:43 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:45:43 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:45:43 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:45:43 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:45:43 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:45:43 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:45:43 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:45:43 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:45:43 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:45:43 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:45:43 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:45:43 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:45:43 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:45:43 IQ138000 kernel: brd: module loaded
Oct 11 05:45:43 IQ138000 kernel: loop: module loaded
Oct 11 05:45:43 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:45:43 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:45:43 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:45:43 IQ138000 kernel: CAN device driver interface
Oct 11 05:45:43 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:45:43 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:45:43 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:45:43 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:45:43 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:45:43 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:45:43 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:45:43 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:45:43 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:45:43 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:45:43 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:45:43 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:45:43 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:45:43 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:45:43 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:45:43 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:45:43 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:45:43 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:45:43 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:45:43 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:45:43 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:45:43 IQ138000 kernel: can: controller area network core
Oct 11 05:45:43 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:45:43 IQ138000 kernel: can: raw protocol
Oct 11 05:45:43 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:45:43 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:45:43 IQ138000 kernel: can: SAE J1939
Oct 11 05:45:43 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:45:43 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:45:43 IQ138000 kernel: registered taskstats version 1
Oct 11 05:45:43 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:45:43 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:45:43 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:45:43 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:45:43 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:45:43 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:45:43 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:45:43 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:45:43 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:45:39 UTC (1760161539)
Oct 11 05:45:43 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:45:43 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:45:43 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:45:43 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:45:43 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:45:43 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:45:43 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:45:43 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:45:43 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:45:43 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:45:43 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:45:43 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:45:43 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:45:43 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:45:43 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: random: fast init done
Oct 11 05:45:43 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:45:43 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:45:43 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:45:43 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:45:43 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:45:43 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:45:43 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:45:43 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:45:43 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:45:43 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:45:43 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:45:43 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:45:43 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:45:43 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:45:43 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:45:43 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:45:43 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:45:43 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:45:43 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:45:43 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:45:43 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:45:43 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:45:43 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:45:43 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:45:43 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:45:43 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:45:43 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:45:43 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:45:43 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:45:43 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:45:43 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:45:43 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:45:43 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:45:43 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:45:43 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:45:43 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:45:43 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:45:43 IQ138000 kernel: of_cfs_init
Oct 11 05:45:43 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:45:43 IQ138000 kernel: ALSA device list:
Oct 11 05:45:43 IQ138000 kernel:   No soundcards found.
Oct 11 05:45:43 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:45:43 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:45:43 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:45:43 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:45:43 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:45:43 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:45:43 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:45:43 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:45:43 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:45:43 IQ138000 kernel:   with arguments:
Oct 11 05:45:43 IQ138000 kernel:     /sbin/init
Oct 11 05:45:43 IQ138000 kernel:   with environment:
Oct 11 05:45:43 IQ138000 kernel:     HOME=/
Oct 11 05:45:43 IQ138000 kernel:     TERM=linux
Oct 11 05:45:43 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:45:43 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:45:43 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:45:43 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:45:43 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:45:43 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:45:43 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:45:43 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:45:43 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:45:43 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:45:43 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:45:43 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:45:43 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:45:43 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:45:43 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:45:43 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:45:43 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:45:43 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:45:43 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:45:43 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:45:43 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:45:43 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:45:43 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:45:43 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:45:43 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:45:43 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:45:43 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:45:43 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:45:43 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:45:43 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:45:43 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:45:43 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:45:43 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:45:43 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:45:43 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:45:43 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:45:43 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:45:43 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:45:43 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:45:43 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:45:43 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:45:43 IQ138000 systemd-journald[139]: Journal started
Oct 11 05:45:43 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:45:43 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 05:45:43 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:45:43 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:45:43 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:45:43 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:45:43 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:45:43 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:45:43 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:45:43 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:45:43 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:45:44 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:45:44 IQ138000 systemd-random-seed[150]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:45:44 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:45:44 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:45:44 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:45:44 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:45:44 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:45:44 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:45:44 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:45:44 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:45:44 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:45:44 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:45:44 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:45:44 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:45:45 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 05:45:45 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:45:45 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:45:45 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:45:45 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:45:45 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:45:45 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:45:45 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:45:45 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:45:45 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:45:45 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:45:45 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:45:45 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:45:45 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:45:45 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:45:45 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:45:45 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:45:45 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:45:45 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:45:45 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:45:45 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:45:45 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:45:45 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:45:45 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:45:46 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:45:46 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:45:46 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:45:46 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:45:46 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 05:45:46 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 05:45:46 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:45:46 IQ138000 systemd-udevd[166]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:45:46 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:45:46 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:45:46 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:45:46 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:45:46 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:45:46 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:45:46 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:45:46 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:45:46 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:45:46 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:45:46 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:45:46 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:45:46 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:45:46 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:45:46 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:45:46 IQ138000 systemd-fsck[215]: data: recovering journal
Oct 11 05:45:46 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:45:46 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:45:46 IQ138000 systemd-fsck[215]: data: clean, 16459/328656 files, 365696/1313536 blocks
Oct 11 05:45:46 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:45:46 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:45:46 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:45:46 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:45:46 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:45:46 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:45:46 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:45:46 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:45:46 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:45:46 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:45:46 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.244ms for 461 entries.
Oct 11 05:45:46 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 482.3M, max 496.6M, 14.2M free.
Oct 11 05:45:46 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:45:47 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 05:45:47 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:45:47 IQ138000 kernel: random: crng init done
Oct 11 05:45:47 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:45:47 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:45:47 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:45:47 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:45:47 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:45:47 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:45:47 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:45:47 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:45:47 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:45:48 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:45:48 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:45:48 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:45:48 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:45:48 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:45:48 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:45:48 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:45:48 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:45:48 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:45:48 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:45:48 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:45:48 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:45:48 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:45:48 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:45:48 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:45:48 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:45:48 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:45:48 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:45:48 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:45:48 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:45:48 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:45:48 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:45:48 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:45:48 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 05:45:48 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:45:48 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:45:48 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:45:48 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 05:45:48 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:45:48 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:45:48 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:45:48 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:45:48 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:45:48 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:45:48 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:45:48 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 05:45:48 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:45:48 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:45:48 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 05:45:48 IQ138000 migrate.sh[320]: Error: No such file or directory
Oct 11 05:45:48 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:45:48 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:45:48 IQ138000 migrate.sh[331]: Error: No such file or directory
Oct 11 05:45:48 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:45:49 IQ138000 migrate.sh[342]: Error: No such file or directory
Oct 11 05:45:49 IQ138000 reverse-ssh.sh[340]: Error: No such file or directory
Oct 11 05:45:49 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:45:49 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:45:49 IQ138000 migrate.sh[351]: Error: No such file or directory
Oct 11 05:45:49 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:45:49 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:45:49 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:45:49 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:45:49 IQ138000 polkitd[329]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:45:49 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:45:49 IQ138000 migrate.sh[366]: Error: No such file or directory
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Successfully dropped root privileges.
Oct 11 05:45:49 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: avahi-daemon 0.8 starting up.
Oct 11 05:45:49 IQ138000 rules-preprocessor[336]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:45:49 IQ138000 rules-preprocessor[336]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:45:49 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Successfully called chroot().
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Successfully dropped remaining capabilities.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: No service file found in /etc/avahi/services.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Network interface enumeration completed.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Registering new address record for ::1 on lo.*.
Oct 11 05:45:49 IQ138000 avahi-daemon[367]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:45:49 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:45:49 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:45:49 IQ138000 wb-watch-configs[389]: Watched dirs: /etc /etc/network
Oct 11 05:45:49 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:45:49 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:45:49 IQ138000 wpa_supplicant[380]: Successfully initialized wpa_supplicant
Oct 11 05:45:49 IQ138000 systemd-logind[343]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:45:49 IQ138000 systemd-logind[343]: New seat seat0.
Oct 11 05:45:49 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:45:49 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:45:49 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:45:49 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:45:49 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:45:49 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:45:49 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:45:49 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:45:49 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:45:49 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:45:49 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:45:49 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:45:49 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:45:49 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:45:49 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:45:49 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:45:49 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:45:49 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:45:49 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:45:49 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:45:49 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:45:49 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:45:49 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:45:49 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:45:49 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:45:49 IQ138000 monit[325]: Starting daemon monitor: monit.
Oct 11 05:45:49 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:45:49 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:45:50 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:45:50 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:45:50 IQ138000 avahi-daemon[367]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1478680112.
Oct 11 05:45:50 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:45:50 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:45:50 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.1902] NetworkManager (version 1.42.4) is starting... (boot:9323a646-1eb2-4afd-8016-ca83eaa8dda6)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.1907] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:45:50 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.2279] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:45:50 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.2953] manager[0x676900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:45:50 IQ138000 ModemManager[466]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:45:50 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:45:50 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.5963] hostname: hostname: using hostnamed
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.5966] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6004] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6082] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6102] manager[0x676900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6104] manager[0x676900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6380] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6464] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6503] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6813] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6853] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6874] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6882] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6888] manager: Networking is enabled by state file
Oct 11 05:45:50 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=407 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6942] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6945] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6947] ifupdown: management mode: unmanaged
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6949] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.6951] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:45:50 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7519] dhcp: init: Using DHCP client 'internal'
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7541] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7654] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7700] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:45:50 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7761] device (lo): Activation: starting connection 'lo' (ce420056-aac9-4dff-86a3-2737b4e1078f)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7833] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:45:50 IQ138000 NetworkManager[407]: <info>  [1760161550.7859] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:45:50 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:45:50 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.1413] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.1438] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.1464] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.1536] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:45:51 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:45:51 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:45:51 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:45:51 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:45:51 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.3689] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.3775] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.3859] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:45:51 IQ138000 NetworkManager[407]: <info>  [1760161551.3939] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:45:51 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:45:52 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.2481] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.2551] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.2578] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3318] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3336] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3351] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3667] modem-manager: ModemManager available
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3675] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3833] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3847] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.3888] device (lo): Activation: successful, device activated.
Oct 11 05:45:52 IQ138000 wpa_supplicant[380]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.6865] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.6874] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.6894] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.6919] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.6959] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7082] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7139] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7144] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7176] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7205] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7246] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:45:52 IQ138000 NetworkManager[407]: <info>  [1760161552.7290] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:45:53 IQ138000 ModemManager[466]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:45:53 IQ138000 ModemManager[466]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:45:53 IQ138000 ModemManager[466]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:45:56 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:45:56 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:45:56 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 05:45:56 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:56 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:45:56 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:45:56 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:45:56 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 05:45:56 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:57 IQ138000 init.sh[1320]: ...
Oct 11 05:45:57 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 05:45:57 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:57 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:45:57 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:45:57 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:45:57 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 05:45:57 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:57 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:45:57 IQ138000 init.sh[1320]: ...
Oct 11 05:45:57 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 05:45:57 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:58 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:45:58 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:45:58 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:45:58 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 05:45:58 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:58 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:45:58 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 05:45:58 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:45:58 IQ138000 init.sh[1320]: ...
Oct 11 05:45:58 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:45:58 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:45:58 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:45:58 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:45:58 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:45:59 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:45:59 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:45:59 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:45:59 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:45:59 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:45:59 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:45:59 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:45:59 IQ138000 lsyncd[1615]: 05:45:59 Normal: --- Startup ---
Oct 11 05:45:59 IQ138000 lsyncd[1615]: 05:45:59 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:45:59 IQ138000 lsyncd[1615]: journal
Oct 11 05:45:59 IQ138000 lsyncd[1615]: messages
Oct 11 05:45:59 IQ138000 lsyncd[1615]: iq_network_manager/iq_network_manager.log
Oct 11 05:45:59 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:45:59 IQ138000 knxd[1610]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:45:59 IQ138000 knxd[1610]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:45:59 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:45:59 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:45:59 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:45:59 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:45:59 IQ138000 lsyncd[1627]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:45:59 IQ138000 lsyncd[1621]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:45:59 IQ138000 lsyncd[1621]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 05:45:59 IQ138000 lsyncd[1615]: 05:45:59 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:45:59 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:45:59 IQ138000 persist_meter_data.sh[1641]: Error: No such file or directory
Oct 11 05:45:59 IQ138000 ntpd[1624]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:45:59 IQ138000 ntpd[1624]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:45:59 IQ138000 ntpd[1624]: ----------------------------------------------------
Oct 11 05:45:59 IQ138000 ntpd[1624]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:45:59 IQ138000 ntpd[1624]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:45:59 IQ138000 ntpd[1624]: corporation.  Support and training for ntp-4 are
Oct 11 05:45:59 IQ138000 ntpd[1624]: available at https://www.nwtime.org/support
Oct 11 05:45:59 IQ138000 ntpd[1624]: ----------------------------------------------------
Oct 11 05:45:59 IQ138000 ntpd[1653]: proto: precision = 1.000 usec (-20)
Oct 11 05:45:59 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:45:59 IQ138000 ntpd[1653]: basedate set to 2020-09-11
Oct 11 05:45:59 IQ138000 ntpd[1653]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:45:59 IQ138000 ntpd[1653]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:45:59 IQ138000 ntpd[1653]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:45:59 IQ138000 ntpd[1653]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:45:59 IQ138000 ntpd[1653]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:45:59 IQ138000 ntpd[1653]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:45:59 IQ138000 ntpd[1653]: Listen normally on 3 lo [::1]:123
Oct 11 05:45:59 IQ138000 ntpd[1653]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:45:59 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:45:59 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:45:59 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:46:00 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 05:46:00 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 05:46:00 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:46:00 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:46:00 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:46:00 IQ138000 wb-mqtt-w1[1687]: MQTT broker localhost:1883
Oct 11 05:46:00 IQ138000 wb-mqtt-w1[1687]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:00 IQ138000 wb-mqtt-w1[1687]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:46:00 IQ138000 wb-mqtt-w1[1687]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:46:00 IQ138000 wb-mqtt-w1[1687]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:46:00 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:00 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:46:00 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:46:00 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:46:00 IQ138000 wb-connection-manager[1506]: Connection LegacyWiFi not found, skipping
Oct 11 05:46:00 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:46:00 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:46:00 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:46:00 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:00 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:00 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:46:00 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:46:00 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:46:00 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:46:00 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:00 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:46:00 IQ138000 vnstatd[1655]: Info: vnStat daemon 2.6 started. (pid:1655 uid:110 gid:117 64-bit)
Oct 11 05:46:00 IQ138000 vnstatd[1655]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:46:00 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:46:00 IQ138000 vnstatd[1655]: Info: Interface "ppp0" disabled.
Oct 11 05:46:00 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:46:00 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:46:00 IQ138000 ntpd[1653]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:46:00 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:46:00 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:46:00 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:46:00 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:46:00 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:46:00 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:46:00 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:46:00 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:46:00 IQ138000 sshd[1749]: Server listening on 0.0.0.0 port 22.
Oct 11 05:46:00 IQ138000 sshd[1749]: Server listening on :: port 22.
Oct 11 05:46:00 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:46:01 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:46:01 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:46:01 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:01 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:46:01 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:46:01 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <error> [1760161561.2703] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.2706] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1506 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:46:01 IQ138000 wb-connection-manager[1506]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:46:01 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:46:01 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:46:01 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:46:01 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:46:01 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:46:01 IQ138000 wpa_supplicant[380]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:46:01 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:46:01 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:46:01 IQ138000 reverse-ssh.sh[1867]: Error: No such file or directory
Oct 11 05:46:01 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:01 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:46:01 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.7559] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.7611] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1506 uid=0 result="success"
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.7635] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.7736] manager: NetworkManager state is now CONNECTING
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.7835] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:01 IQ138000 ntpd[1653]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:46:01 IQ138000 wb-adjust-systime[1860]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:46:01 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:01 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.8345] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.8418] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.8846] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9109] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9301] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9520] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9536] Config: added 'scan_ssid' value '1'
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9554] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9585] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:46:01 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:46:01 IQ138000 NetworkManager[407]: <info>  [1760161561.9638] Config: added 'psk' value '<hidden>'
Oct 11 05:46:01 IQ138000 wb-adjust-systime[1860]: Drift file is valid (was recently edited)
Oct 11 05:46:02 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:46:02 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:46:02 IQ138000 knxd[1917]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:46:02 IQ138000 knxd[1917]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:46:02 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:46:02 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:02 IQ138000 mosquitto[1907]: 1760161562: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:46:02 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:02 IQ138000 NetworkManager[407]: <info>  [1760161562.1870] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:46:02 IQ138000 NetworkManager[407]: <info>  [1760161562.1872] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:46:02 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:46:02 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:46:02 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:46:02 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:46:02 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:46:02 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:46:02 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:46:02 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:46:02 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:46:02 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:46:02 IQ138000 ntpd[1653]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:46:02 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: MQTT broker localhost:1883
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:46:02 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:02 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:46:02 IQ138000 wb-mqtt-knx[2012]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:02 IQ138000 wb-mqtt-knx[2012]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Create indices if necessary
Oct 11 05:46:02 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Analyzing data table
Oct 11 05:46:03 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:46:03 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:46:03 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:46:03 IQ138000 wb-mqtt-logs[2016]: MQTT broker localhost:1883
Oct 11 05:46:03 IQ138000 wb-mqtt-logs[2016]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:03 IQ138000 wb-mqtt-logs[2016]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:03 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:46:03 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.668s CPU time.
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 05:46:03 IQ138000 wb-mqtt-iec104[1999]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 05:46:03 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:46:03 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:46:03 IQ138000 ntpd[1653]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:46:03 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:46:04 IQ138000 wb-mqtt-iec104[2105]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:46:04 IQ138000 wb-mqtt-opcua[2044]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:46:04 IQ138000 wb-mqtt-confed[1991]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:46:04 IQ138000 wb-mqtt-confed[1991]: INFO: [wbgo_mqtt] confed-IQ138000-1991: MQTT connection established
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:46:04 IQ138000 wb-mqtt-gpio[1871]: INFO: [gpio driver] Started
Oct 11 05:46:04 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:46:05 IQ138000 wb-mqtt-iec104[2105]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:46:05 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:46:05 IQ138000 wb-mqtt-opcua[2208]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:46:05 IQ138000 wb-mqtt-mbgate[2022]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:46:05 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:46:05 IQ138000 wb-mqtt-logs[2016]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:05 IQ138000 wb-mqtt-logs[2016]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:05 IQ138000 wb-mqtt-logs[2016]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:05 IQ138000 wb-mqtt-logs[2016]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:46:05 IQ138000 wb-mqtt-opcua[2208]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:46:05 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:05 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:46:05 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:46:05 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:46:06 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:46:06 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:46:06 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:46:06 IQ138000 wb-mqtt-knx[2012]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:06 IQ138000 wb-mqtt-knx[2012]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:06 IQ138000 wb-mqtt-knx[2012]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:06 IQ138000 wb-mqtt-knx[2012]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:46:06 IQ138000 wb-mqtt-knx[2012]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:46:07 IQ138000 python3[1964]: No data file found at /tmp/network_status_cache.json
Oct 11 05:46:07 IQ138000 python3[1964]: Connecting to MQTT
Oct 11 05:46:07 IQ138000 python3[1964]: Connected to MQTT
Oct 11 05:46:07 IQ138000 python3[1964]: Connection returned result: Connection Accepted.
Oct 11 05:46:07 IQ138000 NetworkManager[407]: <info>  [1760161567.8422] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:46:07 IQ138000 NetworkManager[407]: <info>  [1760161567.8463] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:46:08 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2041 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:46:08 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New virtual device lo ce420056-aac9-4dff-86a3-2737b4e1078f /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:46:09 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New active connection lo ce420056-aac9-4dff-86a3-2737b4e1078f /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:46:10 IQ138000 wb-device-manager[1976]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:46:10 IQ138000 wb-device-manager[1976]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:46:10 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:10 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:11 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:46:11 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:46:11 IQ138000 kernel: dldo4: disabling
Oct 11 05:46:11 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:46:11 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:46:11 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:46:11 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:46:11 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:46:11 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:46:12 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:12 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:46:12 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:46:12 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: MQTT broker localhost:1883
Oct 11 05:46:12 IQ138000 knxd[3113]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:46:12 IQ138000 knxd[3113]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:46:12 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:12 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:12 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:46:12 IQ138000 wb-mqtt-adc[3115]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:46:13 IQ138000 wb-mqtt-confed[1991]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-serial[1668]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:46:13 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] DB initialization is done
Oct 11 05:46:14 IQ138000 wb-gsm[3328]: main: Called from pid 1 (systemd)
Oct 11 05:46:14 IQ138000 wb-gsm[3374]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:46:15 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:15 IQ138000 wb-usb-otg-start.sh[3445]: : wb-usb-otg-start
Oct 11 05:46:15 IQ138000 wb-usb-otg-start.sh[3445]: main: setup_device()
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:46:15 IQ138000 wb-gsm[3451]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:46:15 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:46:15 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:46:15 IQ138000 kernel: using random self ethernet address
Oct 11 05:46:15 IQ138000 kernel: using random host ethernet address
Oct 11 05:46:15 IQ138000 wb-usb-otg-start.sh[3445]: main: enabling profile rndis
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:46:15 IQ138000 systemd-udevd[3431]: Using default interface naming scheme 'v247'.
Oct 11 05:46:15 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:46:15 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:46:15 IQ138000 NetworkManager[407]: <info>  [1760161575.8392] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:46:15 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:46:15 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:46:16 IQ138000 NetworkManager[407]: <info>  [1760161576.0210] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:46:16 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 05:46:16 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:46:16 IQ138000 NetworkManager[407]: <info>  [1760161576.4068] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:46:16 IQ138000 NetworkManager[407]: <info>  [1760161576.4071] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:46:16 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:46:16 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:46:17 IQ138000 wb-gsm[3577]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:46:17 IQ138000 wb-gsm[3588]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:46:17 IQ138000 python3[1964]: Выполнение: service wb-connection-manager stop
Oct 11 05:46:17 IQ138000 wb-gsm[3619]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:46:17 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:46:18 IQ138000 ModemManager[466]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: DB logger started, go to main loop
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:46:18 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:46:18 IQ138000 npm[1704]: > zigbee2mqtt@2.1.1 start
Oct 11 05:46:18 IQ138000 npm[1704]: > node index.js
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:46:18 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:46:19 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:46:19 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:46:20 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:21 IQ138000 npm[3703]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:46:21 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:46:22 IQ138000 wb-gsm[4001]: mm_off: Modem is already OFF
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:22 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:22 IQ138000 wb-gsm[4071]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 05:46:23 IQ138000 wb-gsm[4082]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:46:23 IQ138000 wb-gsm[4105]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:46:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:23 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:46:24 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:46:25 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:25 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:46:25 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:46:25 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:25 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:25 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:25 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:25 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:46:26 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:46:26 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:26 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:46:26 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:46:26 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:46:26 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:46:26 IQ138000 knxd[4363]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:46:26 IQ138000 knxd[4363]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:46:26 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: MQTT broker localhost:1883
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:46:26 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:46:26 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:46:26 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:46:26 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.137s CPU time.
Oct 11 05:46:26 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: w1 thread Started
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:46:26 IQ138000 wb-mqtt-w1[4375]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:46:26 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:26 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:26 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:46:26 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:46:26 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:26 IQ138000 python3[1964]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:46:26 IQ138000 python3[1964]:  
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:26 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <warn>  [1760161587.5292] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <info>  [1760161587.5295] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <info>  [1760161587.5320] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <warn>  [1760161587.5341] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <info>  [1760161587.5358] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:27 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:46:27 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <info>  [1760161587.5959] manager: startup complete
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <info>  [1760161587.5990] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:46:27 IQ138000 NetworkManager[407]: <info>  [1760161587.5992] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:46:27 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:46:27 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:46:27 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:27 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:46:27 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 4 input(s) @ 8740 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:46:28 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:46:29 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:46:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:46:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:46:30 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:46:30 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:46:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:46:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:46:30 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:46:31 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:31 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:46:31 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:46:31 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:46:31 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:46:31 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:46:31 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:46:31 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:46:31 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:46:31 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:46:31 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:46:31 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:46:31 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:46:31 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:46:31 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:46:31 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:46:31 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:46:31 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:46:31 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:46:31 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:46:31 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:46:31 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 05:46:31 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:46:31 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:46:31 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 05:46:31 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 05:46:31 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 05:46:31 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 05:46:31 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 05:46:31 IQ138000 watchdog[4627]:  no test binary files
Oct 11 05:46:31 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 05:46:31 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 05:46:31 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 05:46:31 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:46:31 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:46:31 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 05:46:31 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 05:46:31 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:46:31 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:46:31 IQ138000 python3[1964]: Выполнение: mmcli -m wbc
Oct 11 05:46:31 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:46:31 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:46:31 IQ138000 systemd[1]: Startup finished in 3.765s (kernel) + 50.229s (userspace) = 53.995s.
Oct 11 05:46:31 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:31 IQ138000 wb-rules[4609]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:46:31 IQ138000 wb-rules[4609]: INFO: driver is created
Oct 11 05:46:31 IQ138000 wb-rules[4609]: INFO: [wbgo_mqtt] rules-IQ138000-4609: MQTT connection established
Oct 11 05:46:31 IQ138000 wb-rules[4609]: INFO: driver loop is started
Oct 11 05:46:31 IQ138000 wb-rules[4609]: INFO: wait for driver to become ready
Oct 11 05:46:32 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:33 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 6 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:33 IQ138000 wb-rules[4609]: INFO: driver is ready
Oct 11 05:46:33 IQ138000 wb-rules[4609]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:46:33 IQ138000 wb-rules[4609]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4609: MQTT connection established
Oct 11 05:46:33 IQ138000 wb-rules[4609]: INFO: [engine] Starting main loop
Oct 11 05:46:33 IQ138000 wb-rules[4609]: INFO: [engine] Starting sync loop
Oct 11 05:46:33 IQ138000 wb-rules[4609]: INFO: the engine is ready
Oct 11 05:46:34 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-rules[4609]: WARNING: [rule warning] DAC: no config file
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:34 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:46:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:35 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:35 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:46:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:35 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:36 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:36 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:46:36 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:46:36 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:46:36 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:46:36 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:46:36 IQ138000 knxd[4972]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:46:36 IQ138000 knxd[4972]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:46:36 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:36 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:36 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:36 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:46:36 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:46:36 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:36 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:46:36 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:46:36 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:46:36 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:46:36 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 1a:bf:e8:e6:df:3b
Oct 11 05:46:36 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:46:36 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:46:36 IQ138000 NetworkManager[407]: <info>  [1760161596.8946] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:46:36 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:46:36 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:46:36 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:46:36 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:46:36 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:46:36 IQ138000 systemd-udevd[4981]: Using default interface naming scheme 'v247'.
Oct 11 05:46:37 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:46:37 IQ138000 systemd-udevd[4981]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:37 IQ138000 python3[1964]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:46:37 IQ138000 wpa_supplicant[380]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-rules[4609]: INFO: all rule files are loaded
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:37 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:38 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:46:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:46:38 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:39 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:39 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:39 IQ138000 wb-gsm[5044]: mm_on: Waiting for modem to start
Oct 11 05:46:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:46:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:46:40 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:40 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:46:41 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:46:41 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:46:42 IQ138000 npm[3703]: [2025-10-11 05:46:42] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:46:42 IQ138000 npm[3703]: [2025-10-11 05:46:42] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:46:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:42 IQ138000 npm[3703]: [2025-10-11 05:46:42] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:46:42 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:42 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:46:42 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:46:42 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:46:42 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:46:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:46:43 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:43 IQ138000 npm[3703]: [2025-10-11 05:46:43] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:46:43 IQ138000 npm[3703]: [2025-10-11 05:46:43] info:         zh:zstack:znp: Serialport opened
Oct 11 05:46:43 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:44 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:46:44.964+00:00
Oct 11 05:46:44 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:46:44 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:46:44.964Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:44 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161784980,"cmd_timestamp_ms":1760161604980,"source":"schedule"}
Oct 11 05:46:44 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161784980,"cmd_timestamp_ms":1760161604980,"source":"schedule"}
Oct 11 05:46:45 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:46:45.249+00:00
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:46:45.249Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161785265,"cmd_timestamp_ms":1760161605265,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760161785265,"cmd_timestamp_ms":1760161605265,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:46:45.364+00:00
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:46:45.364Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785376,"cmd_timestamp_ms":1760161605376,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785376,"cmd_timestamp_ms":1760161605376,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:46:45.480+00:00
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:46:45.480Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785491,"cmd_timestamp_ms":1760161605491,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785491,"cmd_timestamp_ms":1760161605491,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:46:45.718+00:00
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:46:45.718Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785729,"cmd_timestamp_ms":1760161605729,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785729,"cmd_timestamp_ms":1760161605729,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:46:45.848+00:00
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:46:45.848Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785868,"cmd_timestamp_ms":1760161605868,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161785868,"cmd_timestamp_ms":1760161605868,"source":"schedule"}
Oct 11 05:46:45 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 input(s) @ 4668 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:46:45 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:46:46.004+00:00
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:46:46.004Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161786015,"cmd_timestamp_ms":1760161606015,"source":"schedule"}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161786015,"cmd_timestamp_ms":1760161606015,"source":"schedule"}
Oct 11 05:46:46 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:46:46.165+00:00
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:46:46.165Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161786180,"cmd_timestamp_ms":1760161606180,"source":"schedule"}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760161786180,"cmd_timestamp_ms":1760161606180,"source":"schedule"}
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: Currently 4 devices are joined.
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:46:46.532+00:00
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:46:46.532Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161786545,"cmd_timestamp_ms":1760161606545,"source":"schedule"}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161786545,"cmd_timestamp_ms":1760161606545,"source":"schedule"}
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m: Connected to MQTT server
Oct 11 05:46:46 IQ138000 npm[3703]: [2025-10-11 05:46:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:46:46.751+00:00
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:46:46.751Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161786774,"cmd_timestamp_ms":1760161606774,"source":"schedule"}
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161786774,"cmd_timestamp_ms":1760161606774,"source":"schedule"}
Oct 11 05:46:46 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:46:46 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:46:46 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:46:46 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:46:46 IQ138000 knxd[5193]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:46:46 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:46 IQ138000 knxd[5193]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:46:46 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:46 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:46:47.039+00:00
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:46:47.039Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161787100,"cmd_timestamp_ms":1760161607100,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760161787100,"cmd_timestamp_ms":1760161607100,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:46:47 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:46:47 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:46:47 IQ138000 wb-rules[4609]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:46:47 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:47 IQ138000 npm[3703]: [2025-10-11 05:46:47] info:         z2m: Started frontend on port 8282
Oct 11 05:46:47 IQ138000 npm[3703]: [2025-10-11 05:46:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:46:47 IQ138000 npm[3703]: [2025-10-11 05:46:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:46:47 IQ138000 npm[3703]: [2025-10-11 05:46:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:46:47 IQ138000 npm[3703]: [2025-10-11 05:46:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:46:47 IQ138000 npm[3703]: [2025-10-11 05:46:47] info:         z2m: Zigbee2MQTT started!
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 7 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:46:47.480+00:00
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:46:47.480Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161787497,"cmd_timestamp_ms":1760161607497,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760161787497,"cmd_timestamp_ms":1760161607497,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:46:47.542+00:00
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:46:47.542Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161787559,"cmd_timestamp_ms":1760161607559,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760161787559,"cmd_timestamp_ms":1760161607559,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:46:47.662+00:00
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:46:47.662Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161787674,"cmd_timestamp_ms":1760161607674,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161787674,"cmd_timestamp_ms":1760161607674,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:46:47.834+00:00
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:46:47.834Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161787849,"cmd_timestamp_ms":1760161607849,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:47 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760161787849,"cmd_timestamp_ms":1760161607849,"source":"schedule"}
Oct 11 05:46:47 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:46:48 IQ138000 wb-watchdog[5246]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:48 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:46:48 IQ138000 wb-rules[4609]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:46:48 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:46:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:49 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:49 IQ138000 wb-mqtt-serial[1668]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 05:46:49 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:46:49 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:46:49 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:46:49 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:46:50 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:50 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:46:50 IQ138000 wb-mqtt-serial[1668]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:46:50 IQ138000 wb-mqtt-serial[1668]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:46:51 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:52 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:53 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 6 input(s) @ 17170 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:46:53 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:54 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:55 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:56 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:57 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:46:57 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:46:57 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:46:57 IQ138000 knxd[5382]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:46:57 IQ138000 knxd[5382]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:46:57 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:46:57 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:46:57 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:46:57 IQ138000 ModemManager[466]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:46:57 IQ138000 ModemManager[466]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:46:57 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:58 IQ138000 ModemManager[466]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:46:58 IQ138000 ModemManager[466]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:46:58 IQ138000 python3[1964]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:46:58 IQ138000 ModemManager[466]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:46:59 IQ138000 ModemManager[466]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:46:59 IQ138000 ModemManager[466]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:46:59 IQ138000 ModemManager[466]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:46:59 IQ138000 ModemManager[466]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:46:59 IQ138000 ModemManager[466]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7537] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7585] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7604] device (ttyUSB1): modem state 'enabling'
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7674] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7697] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7755] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7762] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:46:59 IQ138000 NetworkManager[407]: <info>  [1760161619.7796] manager: NetworkManager state is now CONNECTING
Oct 11 05:46:59 IQ138000 ModemManager[466]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:46:59 IQ138000 wb-mqtt-nm-helper[2041]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:46:59 IQ138000 ModemManager[466]: <info>  [modem0] power state updated: on
Oct 11 05:46:59 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:46:59 IQ138000 python3[1964]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:46:59 IQ138000 python3[1964]:    --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:46:59 IQ138000 python3[1964]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:46:59 IQ138000 python3[1964]:            |                model: A7602E-H
Oct 11 05:46:59 IQ138000 python3[1964]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:46:59 IQ138000 python3[1964]:            |            supported: gsm-umts
Oct 11 05:46:59 IQ138000 python3[1964]:            |              current: gsm-umts
Oct 11 05:46:59 IQ138000 python3[1964]:            |         equipment id: 860803062234204
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   System   |               device: wbc
Oct 11 05:46:59 IQ138000 python3[1964]:            |              drivers: option, rndis_host
Oct 11 05:46:59 IQ138000 python3[1964]:            |               plugin: simtech
Oct 11 05:46:59 IQ138000 python3[1964]:            |         primary port: ttyUSB1
Oct 11 05:46:59 IQ138000 python3[1964]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:46:59 IQ138000 python3[1964]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:46:59 IQ138000 python3[1964]:            |                state: enabling
Oct 11 05:46:59 IQ138000 python3[1964]:            |          power state: on
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:46:59 IQ138000 python3[1964]:            |              current: allowed: any; preferred: none
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   3GPP     |                 imei: 860803062234204
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:46:59 IQ138000 python3[1964]:   --------------------------------
Oct 11 05:46:59 IQ138000 python3[1964]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:46:59 IQ138000 python3[1964]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:46:59 IQ138000 python3[1964]:            |                       slot 2: none
Oct 11 05:47:00 IQ138000 python3[1964]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:47:00 IQ138000 python3[1964]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:47:00 IQ138000 python3[1964]:  successfully requested primary SIM switch in modem
Oct 11 05:47:00 IQ138000 wb-rules[4609]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:47:00 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:47:00 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:47:00 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:47:00 IQ138000 lsyncd[5435]: 05:47:00 Normal: --- Startup ---
Oct 11 05:47:00 IQ138000 lsyncd[5435]: 05:47:00 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:47:00 IQ138000 lsyncd[5435]: journal
Oct 11 05:47:00 IQ138000 lsyncd[5435]: iq_network_manager/iq_network_manager.log
Oct 11 05:47:00 IQ138000 lsyncd[5435]: messages
Oct 11 05:47:00 IQ138000 lsyncd[5437]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:47:00 IQ138000 lsyncd[5436]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:47:00 IQ138000 lsyncd[5436]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:47:00 IQ138000 lsyncd[5435]: 05:47:00 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:47:00 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:47:00 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:47:01 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:47:01 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:47:02 IQ138000 wb-rules[4609]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:47:03 IQ138000 ModemManager[466]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:47:03 IQ138000 ModemManager[466]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:47:03 IQ138000 ModemManager[466]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:47:03 IQ138000 ModemManager[466]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] simple connect started...
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:47:04 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:47:04 IQ138000 NetworkManager[407]: <info>  [1760161624.3004] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:47:04 IQ138000 NetworkManager[407]: <info>  [1760161624.3017] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:47:04 IQ138000 NetworkManager[407]: <info>  [1760161624.3060] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:47:04 IQ138000 NetworkManager[407]: <info>  [1760161624.3082] ppp-manager: starting PPP connection
Oct 11 05:47:04 IQ138000 NetworkManager[407]: <info>  [1760161624.3224] ppp-manager: pppd started with pid 5462
Oct 11 05:47:04 IQ138000 pppd[5462]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:47:04 IQ138000 NetworkManager[5462]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: initializing
Oct 11 05:47:04 IQ138000 pppd[5462]: pppd 2.4.9 started by root, uid 0
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:47:04 IQ138000 pppd[5462]: Using interface ppp0
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:47:04 IQ138000 NetworkManager[5462]: Using interface ppp0
Oct 11 05:47:04 IQ138000 NetworkManager[5462]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:47:04 IQ138000 pppd[5462]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:47:04 IQ138000 NetworkManager[5462]: PAP authentication succeeded
Oct 11 05:47:04 IQ138000 NetworkManager[5462]: kernel does not support PPP filtering
Oct 11 05:47:04 IQ138000 pppd[5462]: PAP authentication succeeded
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:47:04 IQ138000 pppd[5462]: kernel does not support PPP filtering
Oct 11 05:47:04 IQ138000 NetworkManager[407]: <info>  [1760161624.3904] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:47:04 IQ138000 pppd[5462]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:47:04 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:47:04 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:47:04 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:47:04 IQ138000 ModemManager[466]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:47:04 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:47:05 IQ138000 pppd[5462]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:47:05 IQ138000 NetworkManager[5462]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:47:05 IQ138000 pppd[5462]: local  IP address 10.98.159.3
Oct 11 05:47:05 IQ138000 NetworkManager[5462]: local  IP address 10.98.159.3
Oct 11 05:47:05 IQ138000 NetworkManager[5462]: remote IP address 10.64.64.64
Oct 11 05:47:05 IQ138000 NetworkManager[5462]: primary   DNS address 172.23.10.130
Oct 11 05:47:05 IQ138000 NetworkManager[5462]: secondary DNS address 172.23.10.131
Oct 11 05:47:05 IQ138000 pppd[5462]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:47:05 IQ138000 pppd[5462]: remote IP address 10.64.64.64
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.0330] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:47:05 IQ138000 pppd[5462]: primary   DNS address 172.23.10.130
Oct 11 05:47:05 IQ138000 pppd[5462]: secondary DNS address 172.23.10.131
Oct 11 05:47:05 IQ138000 pppd[5462]: nm-ppp-plugin: ip-up event
Oct 11 05:47:05 IQ138000 pppd[5462]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.0426] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.0450] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.0474] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.0523] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:47:05 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=407 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:47:05 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:47:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.0978] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:47:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:47:05 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=407 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:47:05 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:47:05 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:47:05 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.2183] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.2196] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.2216] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.2247] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:47:05 IQ138000 NetworkManager[407]: <info>  [1760161625.2281] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:47:05 IQ138000 wb-mqtt-serial[1668]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
-- Boot 66d13821793b4b8190a71b721f5fe236 --
Oct 11 05:53:38 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 05:53:38 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 05:53:38 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 05:53:38 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 05:53:38 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 05:53:38 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 05:53:38 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 05:53:38 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 05:53:38 IQ138000 kernel: Zone ranges:
Oct 11 05:53:38 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 05:53:38 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 05:53:38 IQ138000 kernel: Movable zone start for each node
Oct 11 05:53:38 IQ138000 kernel: Early memory node ranges
Oct 11 05:53:38 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:53:38 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 05:53:38 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 05:53:38 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 05:53:38 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 05:53:38 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 05:53:38 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 05:53:38 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 05:53:38 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 05:53:38 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 05:53:38 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 05:53:38 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 05:53:38 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 05:53:38 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 05:53:38 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 05:53:38 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 05:53:38 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 05:53:38 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 05:53:38 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 05:53:38 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 05:53:38 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 05:53:38 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 05:53:38 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 05:53:38 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 05:53:38 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 05:53:38 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 05:53:38 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 05:53:38 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 05:53:38 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 05:53:38 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 05:53:38 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 05:53:38 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 05:53:38 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 05:53:38 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 05:53:38 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 05:53:38 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 05:53:38 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 05:53:38 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 05:53:38 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 05:53:38 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 05:53:38 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 05:53:38 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 05:53:38 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 05:53:38 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 05:53:38 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 05:53:38 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 05:53:38 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 05:53:38 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 05:53:38 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 05:53:38 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 05:53:38 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 05:53:38 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 05:53:38 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 05:53:38 IQ138000 kernel: devtmpfs: initialized
Oct 11 05:53:38 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 05:53:38 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 05:53:38 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 05:53:38 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 05:53:38 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 05:53:38 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 05:53:38 IQ138000 kernel: No ATAGs?
Oct 11 05:53:38 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 05:53:38 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 05:53:38 IQ138000 kernel: SCSI subsystem initialized
Oct 11 05:53:38 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 05:53:38 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 05:53:38 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 05:53:38 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 05:53:38 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 05:53:38 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 05:53:38 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 05:53:38 IQ138000 kernel: PTP clock support registered
Oct 11 05:53:38 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 05:53:38 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 05:53:38 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 05:53:38 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 05:53:38 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 05:53:38 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 05:53:38 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 05:53:38 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 05:53:38 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 05:53:38 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 05:53:38 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 05:53:38 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 05:53:38 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 05:53:38 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 05:53:38 IQ138000 kernel: Key type id_resolver registered
Oct 11 05:53:38 IQ138000 kernel: Key type id_legacy registered
Oct 11 05:53:38 IQ138000 kernel: Key type asymmetric registered
Oct 11 05:53:38 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 05:53:38 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 05:53:38 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 05:53:38 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 05:53:38 IQ138000 kernel: io scheduler kyber registered
Oct 11 05:53:38 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:53:38 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 05:53:38 IQ138000 kernel: brd: module loaded
Oct 11 05:53:38 IQ138000 kernel: loop: module loaded
Oct 11 05:53:38 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 05:53:38 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:53:38 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:53:38 IQ138000 kernel: CAN device driver interface
Oct 11 05:53:38 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 05:53:38 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 05:53:38 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 05:53:38 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 05:53:38 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 05:53:38 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 05:53:38 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 05:53:38 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 05:53:38 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 05:53:38 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 05:53:38 IQ138000 kernel: i2c /dev entries driver
Oct 11 05:53:38 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 05:53:38 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 05:53:38 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 05:53:38 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 05:53:38 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 05:53:38 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 05:53:38 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 05:53:38 IQ138000 kernel: Segment Routing with IPv6
Oct 11 05:53:38 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 05:53:38 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 05:53:38 IQ138000 kernel: can: controller area network core
Oct 11 05:53:38 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 05:53:38 IQ138000 kernel: can: raw protocol
Oct 11 05:53:38 IQ138000 kernel: can: broadcast manager protocol
Oct 11 05:53:38 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 05:53:38 IQ138000 kernel: can: SAE J1939
Oct 11 05:53:38 IQ138000 kernel: Key type dns_resolver registered
Oct 11 05:53:38 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 05:53:38 IQ138000 kernel: registered taskstats version 1
Oct 11 05:53:38 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 05:53:38 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 05:53:38 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 05:53:38 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:53:38 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 05:53:38 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 05:53:38 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 05:53:38 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 05:53:38 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T05:53:34 UTC (1760162014)
Oct 11 05:53:38 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 05:53:38 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:53:38 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 05:53:38 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 05:53:38 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 05:53:38 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 05:53:38 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 05:53:38 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 05:53:38 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 05:53:38 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 05:53:38 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 05:53:38 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 05:53:38 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 05:53:38 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 05:53:38 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: random: fast init done
Oct 11 05:53:38 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 05:53:38 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 05:53:38 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 05:53:38 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 05:53:38 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 05:53:38 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 05:53:38 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 05:53:38 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 05:53:38 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 05:53:38 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:53:38 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 05:53:38 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 05:53:38 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 05:53:38 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 05:53:38 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 05:53:38 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 05:53:38 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 05:53:38 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 05:53:38 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 05:53:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 05:53:38 IQ138000 kernel: libphy: stmmac: probed
Oct 11 05:53:38 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:53:38 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 05:53:38 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:53:38 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 05:53:38 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 05:53:38 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 05:53:38 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 05:53:38 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 05:53:38 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 05:53:38 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 05:53:38 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 05:53:38 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 05:53:38 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:53:38 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 05:53:38 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 05:53:38 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 05:53:38 IQ138000 kernel: of_cfs_init
Oct 11 05:53:38 IQ138000 kernel: of_cfs_init: OK
Oct 11 05:53:38 IQ138000 kernel: ALSA device list:
Oct 11 05:53:38 IQ138000 kernel:   No soundcards found.
Oct 11 05:53:38 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 05:53:38 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 05:53:38 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 05:53:38 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 05:53:38 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 05:53:38 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 05:53:38 IQ138000 kernel: devtmpfs: mounted
Oct 11 05:53:38 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 05:53:38 IQ138000 kernel: Run /sbin/init as init process
Oct 11 05:53:38 IQ138000 kernel:   with arguments:
Oct 11 05:53:38 IQ138000 kernel:     /sbin/init
Oct 11 05:53:38 IQ138000 kernel:   with environment:
Oct 11 05:53:38 IQ138000 kernel:     HOME=/
Oct 11 05:53:38 IQ138000 kernel:     TERM=linux
Oct 11 05:53:38 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 05:53:38 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 05:53:38 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 05:53:38 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 05:53:38 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 05:53:38 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:53:38 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 05:53:38 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:53:38 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 05:53:38 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 05:53:38 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 05:53:38 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 05:53:38 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 05:53:38 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 05:53:38 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 05:53:38 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:53:38 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 05:53:38 IQ138000 systemd[1]: Reached target Paths.
Oct 11 05:53:38 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 05:53:38 IQ138000 systemd[1]: Reached target Slices.
Oct 11 05:53:38 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 05:53:38 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 05:53:38 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 05:53:38 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 05:53:38 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 05:53:38 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 05:53:38 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 05:53:38 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:53:38 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 05:53:38 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 05:53:38 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 05:53:38 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 05:53:38 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 05:53:38 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:53:38 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 05:53:38 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 05:53:38 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 05:53:38 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 05:53:38 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 05:53:38 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 05:53:38 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 05:53:38 IQ138000 systemd-journald[140]: Journal started
Oct 11 05:53:38 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 05:53:38 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278738/524288 blocks
Oct 11 05:53:38 IQ138000 systemd[1]: Started Journal Service.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 05:53:38 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 05:53:38 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 05:53:38 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 05:53:38 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 05:53:38 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 05:53:38 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 05:53:39 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:53:39 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:53:39 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 05:53:39 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 05:53:39 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 05:53:39 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 05:53:39 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 05:53:39 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 05:53:39 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 05:53:39 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 05:53:39 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 05:53:39 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 05:53:39 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 05:53:39 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 05:53:39 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 05:53:39 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 05:53:39 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 05:53:40 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 05:53:40 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 05:53:40 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 05:53:40 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 05:53:40 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 05:53:40 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 05:53:40 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 05:53:40 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 05:53:40 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 05:53:40 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 05:53:40 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 05:53:40 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 05:53:40 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 05:53:40 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 05:53:40 IQ138000 systemd-udevd[160]: eth1: Failed to query device driver: Device or resource busy
Oct 11 05:53:40 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 05:53:40 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 05:53:40 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 05:53:40 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 05:53:40 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 05:53:40 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 05:53:40 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 05:53:40 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 05:53:41 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 05:53:41 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 05:53:41 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 05:53:41 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 05:53:41 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 05:53:41 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 05:53:41 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 05:53:41 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 05:53:41 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 05:53:41 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 05:53:41 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 05:53:41 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 05:53:41 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 05:53:41 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 05:53:41 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 05:53:41 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 05:53:41 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 05:53:41 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 05:53:41 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 05:53:41 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 05:53:41 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:53:41 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 05:53:41 IQ138000 systemd-udevd[167]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:53:41 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 05:53:41 IQ138000 systemd[1]: Reached target Swap.
Oct 11 05:53:41 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 05:53:41 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 05:53:41 IQ138000 systemd-fsck[214]: data: clean, 16462/328656 files, 371848/1313536 blocks
Oct 11 05:53:41 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 05:53:41 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 05:53:41 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 05:53:41 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 05:53:41 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 05:53:41 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 05:53:41 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 05:53:41 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 05:53:41 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 05:53:41 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.989ms for 461 entries.
Oct 11 05:53:41 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 05:53:42 IQ138000 kernel: random: crng init done
Oct 11 05:53:42 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 05:53:41 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 05:53:42 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 05:53:42 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 05:53:42 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 05:53:42 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 05:53:42 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 05:53:42 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 05:53:42 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 05:53:42 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 05:53:42 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 05:53:42 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 05:53:43 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 05:53:43 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 05:53:43 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 05:53:43 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 05:53:43 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 05:53:43 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 05:53:43 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 05:53:43 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 05:53:43 IQ138000 systemd[1]: Reached target Timers.
Oct 11 05:53:43 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 05:53:43 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 05:53:43 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 05:53:43 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 05:53:43 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 05:53:43 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 05:53:43 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 05:53:43 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 05:53:43 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:53:43 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 05:53:43 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 05:53:43 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 05:53:43 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 05:53:43 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 05:53:43 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 05:53:43 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 05:53:43 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 05:53:43 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 05:53:43 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 05:53:43 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 05:53:43 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 05:53:43 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:53:43 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 05:53:43 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 05:53:43 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 05:53:43 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 05:53:43 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 05:53:43 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 05:53:43 IQ138000 migrate.sh[318]: Error: No such file or directory
Oct 11 05:53:43 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 05:53:43 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 05:53:43 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:53:43 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:53:44 IQ138000 migrate.sh[328]: Error: No such file or directory
Oct 11 05:53:44 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 05:53:44 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:53:44 IQ138000 migrate.sh[343]: Error: No such file or directory
Oct 11 05:53:44 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 05:53:44 IQ138000 systemd[1]: Started watch config files.
Oct 11 05:53:44 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Oct 11 05:53:44 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 05:53:44 IQ138000 migrate.sh[356]: Error: No such file or directory
Oct 11 05:53:44 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 05:53:44 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 05:53:44 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 05:53:44 IQ138000 rules-preprocessor[337]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:53:44 IQ138000 rules-preprocessor[337]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:53:44 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 05:53:44 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 05:53:44 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 05:53:44 IQ138000 migrate.sh[364]: Error: No such file or directory
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Successfully dropped root privileges.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: avahi-daemon 0.8 starting up.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Successfully called chroot().
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Successfully dropped remaining capabilities.
Oct 11 05:53:44 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: No service file found in /etc/avahi/services.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv6 for mDNS.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: New relevant interface lo.IPv4 for mDNS.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Network interface enumeration completed.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Registering new address record for ::1 on lo.*.
Oct 11 05:53:44 IQ138000 avahi-daemon[366]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 05:53:44 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:53:44 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 05:53:44 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 05:53:44 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 05:53:44 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:44 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 05:53:44 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 05:53:44 IQ138000 systemd-logind[344]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 05:53:44 IQ138000 wpa_supplicant[378]: Successfully initialized wpa_supplicant
Oct 11 05:53:44 IQ138000 systemd-logind[344]: New seat seat0.
Oct 11 05:53:44 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 05:53:44 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:44 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:53:44 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:53:44 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:53:44 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 05:53:44 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 05:53:44 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:44 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:53:44 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 05:53:44 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 05:53:44 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 05:53:44 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 05:53:44 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 05:53:44 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 05:53:44 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 05:53:44 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:53:44 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:53:44 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 05:53:44 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 05:53:44 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 05:53:44 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 05:53:45 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 05:53:45 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 05:53:45 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.0687] NetworkManager (version 1.42.4) is starting... (boot:66d13821-793b-4b81-90a7-1b721f5fe236)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.0691] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.0854] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 05:53:45 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 05:53:45 IQ138000 systemd[1]: Started User Login Management.
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.1322] manager[0x6e6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 05:53:45 IQ138000 avahi-daemon[366]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3828063430.
Oct 11 05:53:45 IQ138000 systemd[1]: Started Network Manager.
Oct 11 05:53:45 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 05:53:45 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 05:53:45 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 05:53:45 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 05:53:45 IQ138000 ModemManager[478]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 05:53:45 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 05:53:45 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7200] hostname: hostname: using hostnamed
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7204] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7240] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7320] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7340] manager[0x6e6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7342] manager[0x6e6900]: rfkill: WWAN hardware radio set enabled
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7648] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7730] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.7762] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8108] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8148] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8169] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8175] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8180] manager: Networking is enabled by state file
Oct 11 05:53:45 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8374] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8377] settings: Loaded settings plugin: keyfile (internal)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8378] ifupdown: management mode: unmanaged
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8380] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.8382] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 05:53:45 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:53:45 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9012] dhcp: init: Using DHCP client 'internal'
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9035] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9147] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9188] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9243] device (lo): Activation: starting connection 'lo' (7bb3db5e-7db8-40bd-a442-6d89ab010554)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9335] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 05:53:45 IQ138000 NetworkManager[405]: <info>  [1760162025.9368] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:53:45 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:53:45 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.2911] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.2932] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.2977] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.3013] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:53:46 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 05:53:46 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 05:53:46 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 05:53:46 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 05:53:46 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.5044] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.5142] device (wlan0): driver supports Access Point (AP) mode
Oct 11 05:53:46 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.5235] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 05:53:46 IQ138000 NetworkManager[405]: <info>  [1760162026.5322] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.3413] device (wlan1): driver supports Access Point (AP) mode
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.3459] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.3501] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.3992] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4024] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4052] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4113] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4599] modem-manager: ModemManager available
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4604] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4617] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.4654] device (lo): Activation: successful, device activated.
Oct 11 05:53:47 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7569] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7576] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7595] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7614] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7734] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7761] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7783] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7824] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7888] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7935] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.7966] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 05:53:47 IQ138000 NetworkManager[405]: <info>  [1760162027.8023] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:48 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 05:53:48 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 05:53:48 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 05:53:51 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:53:51 IQ138000 init.sh[1320]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 05:53:51 IQ138000 init.sh[1335]: In file included from -:16:
Oct 11 05:53:51 IQ138000 init.sh[1335]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:51 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:53:51 IQ138000 init.sh[1320]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 05:53:51 IQ138000 init.sh[1320]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 05:53:51 IQ138000 init.sh[1395]: In file included from -:11:
Oct 11 05:53:51 IQ138000 init.sh[1395]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:51 IQ138000 init.sh[1320]: ...
Oct 11 05:53:51 IQ138000 init.sh[1410]: In file included from -:11:
Oct 11 05:53:51 IQ138000 init.sh[1410]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:52 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:53:52 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:53:52 IQ138000 init.sh[1320]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 05:53:52 IQ138000 init.sh[1429]: In file included from -:24:
Oct 11 05:53:52 IQ138000 init.sh[1429]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:52 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 05:53:52 IQ138000 init.sh[1320]: ...
Oct 11 05:53:52 IQ138000 init.sh[1445]: In file included from -:24:
Oct 11 05:53:52 IQ138000 init.sh[1445]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:53 IQ138000 init.sh[1320]: failsafe bias enabled
Oct 11 05:53:53 IQ138000 init.sh[1320]: terminators are enabled
Oct 11 05:53:53 IQ138000 init.sh[1320]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 05:53:53 IQ138000 init.sh[1467]: In file included from -:11:
Oct 11 05:53:53 IQ138000 init.sh[1467]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:53 IQ138000 init.sh[1320]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 05:53:53 IQ138000 init.sh[1490]: In file included from -:11:
Oct 11 05:53:53 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 05:53:53 IQ138000 init.sh[1320]: ...
Oct 11 05:53:53 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 05:53:53 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 05:53:53 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 05:53:53 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 05:53:53 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 05:53:54 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 05:53:54 IQ138000 systemd[1]: Reached target Network.
Oct 11 05:53:54 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 05:53:54 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 05:53:54 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:53:54 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:53:54 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 05:53:54 IQ138000 lsyncd[1619]: 05:53:54 Normal: --- Startup ---
Oct 11 05:53:54 IQ138000 knxd[1614]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:53:54 IQ138000 knxd[1614]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:53:54 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 05:53:54 IQ138000 lsyncd[1619]: 05:53:54 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:53:54 IQ138000 lsyncd[1619]: messages
Oct 11 05:53:54 IQ138000 lsyncd[1619]: journal
Oct 11 05:53:54 IQ138000 lsyncd[1619]: iq_network_manager/iq_network_manager.log
Oct 11 05:53:54 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:53:54 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 05:53:54 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 05:53:54 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 05:53:54 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 05:53:54 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 05:53:54 IQ138000 persist_meter_data.sh[1650]: Error: No such file or directory
Oct 11 05:53:54 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 05:53:54 IQ138000 ntpd[1629]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 05:53:54 IQ138000 ntpd[1629]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 05:53:54 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 05:53:54 IQ138000 ntpd[1629]: ntp-4 is maintained by Network Time Foundation,
Oct 11 05:53:54 IQ138000 ntpd[1629]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 05:53:54 IQ138000 ntpd[1629]: corporation.  Support and training for ntp-4 are
Oct 11 05:53:54 IQ138000 ntpd[1629]: available at https://www.nwtime.org/support
Oct 11 05:53:54 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 05:53:54 IQ138000 lsyncd[1642]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:53:54 IQ138000 lsyncd[1631]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:53:54 IQ138000 lsyncd[1631]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:53:54 IQ138000 lsyncd[1619]: 05:53:54 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:53:54 IQ138000 ntpd[1661]: proto: precision = 1.000 usec (-20)
Oct 11 05:53:54 IQ138000 ntpd[1661]: basedate set to 2020-09-11
Oct 11 05:53:54 IQ138000 ntpd[1661]: gps base set to 2020-09-13 (week 2123)
Oct 11 05:53:54 IQ138000 ntpd[1661]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 05:53:54 IQ138000 ntpd[1661]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 05:53:54 IQ138000 ntpd[1661]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 05:53:54 IQ138000 ntpd[1661]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 05:53:54 IQ138000 ntpd[1661]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 05:53:54 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 05:53:54 IQ138000 ntpd[1661]: Listen normally on 3 lo [::1]:123
Oct 11 05:53:54 IQ138000 ntpd[1661]: Listening on routing socket on fd #20 for interface updates
Oct 11 05:53:55 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 05:53:55 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 05:53:55 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 05:53:55 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:53:55 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:53:55 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 05:53:55 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 05:53:55 IQ138000 wb-mqtt-w1[1690]: MQTT broker localhost:1883
Oct 11 05:53:55 IQ138000 wb-mqtt-w1[1690]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:55 IQ138000 wb-mqtt-w1[1690]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:53:55 IQ138000 wb-mqtt-w1[1690]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 05:53:55 IQ138000 wb-mqtt-w1[1690]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 05:53:55 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:53:55 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:53:55 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 05:53:55 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 05:53:55 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 05:53:55 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 05:53:55 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 05:53:55 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 05:53:55 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:55 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:53:55 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:53:55 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:53:55 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 05:53:55 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 05:53:55 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:55 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 05:53:55 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 05:53:55 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 05:53:55 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 05:53:55 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 05:53:55 IQ138000 vnstatd[1667]: Info: vnStat daemon 2.6 started. (pid:1667 uid:110 gid:117 64-bit)
Oct 11 05:53:55 IQ138000 vnstatd[1667]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 05:53:55 IQ138000 vnstatd[1667]: Info: Interface "ppp0" disabled.
Oct 11 05:53:55 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 05:53:55 IQ138000 ntpd[1661]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:53:55 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 05:53:55 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 05:53:55 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 05:53:55 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 05:53:56 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 05:53:56 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 05:53:56 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 05:53:56 IQ138000 sshd[1749]: Server listening on 0.0.0.0 port 22.
Oct 11 05:53:56 IQ138000 sshd[1749]: Server listening on :: port 22.
Oct 11 05:53:56 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <error> [1760162036.1441] audit: failed to open auditd socket: Protocol not supported
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.1444] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 05:53:56 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 05:53:56 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:53:56 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 05:53:56 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 05:53:56 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:53:56 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:53:56 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 05:53:56 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:53:56 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:53:56 IQ138000 wpa_supplicant[378]: wlan0: Reject scan trigger since one is already pending
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5436] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5442] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5450] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:56 IQ138000 knxd[1825]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:53:56 IQ138000 knxd[1825]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5552] manager: NetworkManager state is now CONNECTING
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5675] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:56 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5887] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.5890] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:56 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 05:53:56 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6592] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6768] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6853] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6860] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6861] Config: added 'scan_ssid' value '1'
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6863] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6905] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.6907] Config: added 'psk' value '<hidden>'
Oct 11 05:53:56 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:53:56 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 05:53:56 IQ138000 reverse-ssh.sh[1864]: Error: No such file or directory
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.8191] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:53:56 IQ138000 NetworkManager[405]: <info>  [1760162036.8193] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:53:56 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 05:53:56 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:56 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:53:56 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:53:56 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 05:53:56 IQ138000 ntpd[1661]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:53:56 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 05:53:56 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 05:53:57 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:57 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 05:53:57 IQ138000 wb-adjust-systime[1858]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Warning: Error resolving bridge address: Name or service not known.
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 05:53:57 IQ138000 mosquitto[1920]: 1760162037: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 05:53:57 IQ138000 wb-adjust-systime[1858]: Drift file is valid (was recently edited)
Oct 11 05:53:57 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 05:53:57 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 05:53:57 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 05:53:57 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 05:53:57 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 05:53:57 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 05:53:57 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 05:53:57 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 05:53:57 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 05:53:57 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 05:53:57 IQ138000 wb-mqtt-db[2000]: MQTT broker localhost:1883
Oct 11 05:53:57 IQ138000 wb-mqtt-db[2000]: Config file /etc/wb-mqtt-db.conf
Oct 11 05:53:57 IQ138000 ntpd[1661]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:53:57 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:57 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:53:57 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:57 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:53:57 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 05:53:58 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] Creating tables if necessary
Oct 11 05:53:58 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 05:53:58 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] Create indices if necessary
Oct 11 05:53:58 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] Analyzing data table
Oct 11 05:53:58 IQ138000 systemd[1]: Started metrics sender.
Oct 11 05:53:58 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 05:53:58 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 05:53:58 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 05:53:58 IQ138000 wb-mqtt-logs[2030]: MQTT broker localhost:1883
Oct 11 05:53:58 IQ138000 wb-mqtt-logs[2030]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:58 IQ138000 wb-mqtt-logs[2030]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:53:58 IQ138000 ntpd[1661]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 05:53:58 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 05:53:58 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.542s CPU time.
Oct 11 05:53:59 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 05:53:59 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [gpio driver] Started
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:53:59 IQ138000 wb-mqtt-gpio[1879]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2003]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:53:59 IQ138000 wb-mqtt-opcua[2059]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:53:59 IQ138000 wb-mqtt-mbgate[2042]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 05:53:59 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 05:53:59 IQ138000 wb-mqtt-confed[1994]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:53:59 IQ138000 wb-mqtt-confed[1994]: INFO: [wbgo_mqtt] confed-IQ138000-1994: MQTT connection established
Oct 11 05:53:59 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 05:53:59 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 05:53:59 IQ138000 wb-mqtt-iec104[2170]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 05:54:00 IQ138000 wb-mqtt-opcua[2177]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 05:54:00 IQ138000 wb-mqtt-opcua[2177]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 05:54:00 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:00 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 05:54:00 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 05:54:00 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 05:54:01 IQ138000 wb-mqtt-iec104[2170]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 05:54:01 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:54:01 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:54:01 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:54:01 IQ138000 wb-mqtt-knx[2020]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:54:01 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 05:54:01 IQ138000 wb-mqtt-knx[2020]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 05:54:01 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 05:54:01 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 05:54:01 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 05:54:01 IQ138000 wb-mqtt-logs[2030]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:54:01 IQ138000 wb-mqtt-logs[2030]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:54:01 IQ138000 wb-mqtt-logs[2030]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:54:01 IQ138000 wb-mqtt-logs[2030]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:54:02 IQ138000 python3[1970]: No data file found at /tmp/network_status_cache.json
Oct 11 05:54:02 IQ138000 python3[1970]: Connecting to MQTT
Oct 11 05:54:02 IQ138000 python3[1970]: Connected to MQTT
Oct 11 05:54:02 IQ138000 python3[1970]: Connection returned result: Connection Accepted.
Oct 11 05:54:02 IQ138000 NetworkManager[405]: <info>  [1760162042.9979] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:54:02 IQ138000 NetworkManager[405]: <info>  [1760162042.9983] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:54:03 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2049 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 05:54:03 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:54:03 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 05:54:03 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New virtual device lo 7bb3db5e-7db8-40bd-a442-6d89ab010554 /org/freedesktop/NetworkManager/Settings/7
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:54:04 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New active connection lo 7bb3db5e-7db8-40bd-a442-6d89ab010554 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 05:54:04 IQ138000 wb-device-manager[1980]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 05:54:04 IQ138000 wb-device-manager[1980]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 05:54:05 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:54:05 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:54:06 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 05:54:06 IQ138000 kernel: dc5ldo: disabling
Oct 11 05:54:06 IQ138000 kernel: dldo4: disabling
Oct 11 05:54:06 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 05:54:06 IQ138000 kernel: vcc-sd: disabling
Oct 11 05:54:06 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:54:07 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:54:07 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:54:07 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 05:54:07 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 05:54:07 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 05:54:07 IQ138000 knxd[3066]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:54:07 IQ138000 knxd[3066]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:54:07 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:54:07 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:54:07 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:54:07 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: MQTT broker localhost:1883
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] ADC worker thread is started
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:54:07 IQ138000 wb-mqtt-adc[3120]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-confed[1994]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-serial[1677]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 05:54:08 IQ138000 wb-mqtt-db[2000]: INFO: [sqlite] DB initialization is done
Oct 11 05:54:09 IQ138000 wb-gsm[3332]: main: Called from pid 1 (systemd)
Oct 11 05:54:09 IQ138000 wb-gsm[3379]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:54:10 IQ138000 wb-usb-otg-start.sh[3442]: : wb-usb-otg-start
Oct 11 05:54:10 IQ138000 wb-usb-otg-start.sh[3442]: main: setup_device()
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:54:10 IQ138000 wb-gsm[3446]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:54:10 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 05:54:10 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 05:54:10 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 05:54:10 IQ138000 kernel: using random self ethernet address
Oct 11 05:54:10 IQ138000 kernel: using random host ethernet address
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 05:54:10 IQ138000 wb-usb-otg-start.sh[3442]: main: enabling profile rndis
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 05:54:10 IQ138000 NetworkManager[405]: <info>  [1760162050.8225] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 05:54:10 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 05:54:10 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 05:54:10 IQ138000 systemd-udevd[3436]: Using default interface naming scheme 'v247'.
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 05:54:10 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 05:54:10 IQ138000 wb-gsm[3498]: should_enable: Should enable GSM modem
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 05:54:10 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 05:54:10 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 05:54:11 IQ138000 NetworkManager[405]: <info>  [1760162051.0580] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 05:54:11 IQ138000 NetworkManager[405]: <info>  [1760162051.6306] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 05:54:11 IQ138000 NetworkManager[405]: <info>  [1760162051.6308] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 05:54:11 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 05:54:11 IQ138000 wb-gsm[3575]: main: Called from pid 3504 (wb-gsm-mm)
Oct 11 05:54:11 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 05:54:12 IQ138000 wb-gsm[3586]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: DB logger started, go to main loop
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 05:54:12 IQ138000 wb-gsm[3613]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 05:54:12 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 05:54:12 IQ138000 python3[1970]: Выполнение: service wb-connection-manager stop
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 05:54:12 IQ138000 wb-mqtt-db[2000]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 05:54:13 IQ138000 npm[1697]: > zigbee2mqtt@2.1.1 start
Oct 11 05:54:13 IQ138000 npm[1697]: > node index.js
Oct 11 05:54:13 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:54:13 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 05:54:14 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:15 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 npm[3699]: Starting Zigbee2MQTT without watchdog.
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 05:54:16 IQ138000 wb-gsm[3996]: mm_off: Modem is already OFF
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:16 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:17 IQ138000 wb-gsm[4066]: main: Called from pid 3504 (wb-gsm-mm)
Oct 11 05:54:17 IQ138000 wb-gsm[4077]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 05:54:17 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:17 IQ138000 wb-gsm[4100]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 05:54:17 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:17 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:18 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:18 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:18 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 05:54:18 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 4866 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:54:19 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:54:19 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 05:54:19 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 05:54:19 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 05:54:19 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:19 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 05:54:19 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:19 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:20 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 05:54:20 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:20 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:20 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 05:54:20 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:54:20 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 05:54:20 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:54:20 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:54:20 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:20 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:54:20 IQ138000 knxd[4395]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:54:20 IQ138000 knxd[4395]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:54:20 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: MQTT broker localhost:1883
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 05:54:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:54:20 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 05:54:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:54:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: w1 thread Started
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 05:54:20 IQ138000 wb-mqtt-w1[4404]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 05:54:20 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 05:54:20 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:54:20 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:54:20 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 05:54:20 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 05:54:20 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 05:54:20 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.204s CPU time.
Oct 11 05:54:20 IQ138000 python3[1970]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 05:54:20 IQ138000 python3[1970]:  
Oct 11 05:54:20 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:20 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:54:20 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:54:20 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 05:54:20 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:21 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:21 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <warn>  [1760162061.5281] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <info>  [1760162061.5283] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <info>  [1760162061.5301] manager: NetworkManager state is now DISCONNECTED
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <warn>  [1760162061.5320] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <info>  [1760162061.5333] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:21 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:54:21 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <info>  [1760162061.5738] manager: startup complete
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <info>  [1760162061.5750] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 05:54:21 IQ138000 NetworkManager[405]: <info>  [1760162061.5751] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 05:54:21 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 05:54:21 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 05:54:21 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 05:54:21 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 05:54:21 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:22 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 05:54:22 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:54:22 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 05:54:22 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:23 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:54:24 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 05:54:24 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:54:24 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 05:54:24 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 8962 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:54:24 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:54:24 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:54:24 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:54:24 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:54:25 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 05:54:25 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 05:54:25 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:25 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:26 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:26 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 05:54:26 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 05:54:26 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 05:54:26 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 05:54:26 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:54:26 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 05:54:26 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 05:54:26 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 05:54:26 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 05:54:26 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 05:54:26 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 05:54:26 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 05:54:26 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 05:54:26 IQ138000 systemd[1]: Started User command handler service.
Oct 11 05:54:26 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 05:54:26 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 05:54:26 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 05:54:26 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 05:54:26 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 05:54:26 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 05:54:26 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:26 IQ138000 watchdog[4621]: starting daemon (5.16):
Oct 11 05:54:26 IQ138000 watchdog[4621]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 05:54:26 IQ138000 watchdog[4621]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 05:54:26 IQ138000 watchdog[4621]:  ping: no machine to check
Oct 11 05:54:26 IQ138000 watchdog[4621]:  file: no file to check
Oct 11 05:54:26 IQ138000 watchdog[4621]:  pidfile: /var/run/sshd.pid
Oct 11 05:54:26 IQ138000 watchdog[4621]:  interface: no interface to check
Oct 11 05:54:26 IQ138000 watchdog[4621]:  temperature: no sensors to check
Oct 11 05:54:26 IQ138000 watchdog[4621]:  no test binary files
Oct 11 05:54:26 IQ138000 watchdog[4621]:  no repair binary files
Oct 11 05:54:26 IQ138000 watchdog[4621]:  error retry time-out = 30 seconds
Oct 11 05:54:26 IQ138000 watchdog[4621]:  repair attempts = 1
Oct 11 05:54:26 IQ138000 watchdog[4621]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 05:54:26 IQ138000 watchdog[4621]: watchdog now set to 120 seconds
Oct 11 05:54:26 IQ138000 watchdog[4621]: hardware watchdog identity: WBEC WDT
Oct 11 05:54:26 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 05:54:26 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 05:54:26 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 05:54:26 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:26 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 05:54:26 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 05:54:26 IQ138000 systemd[1]: Startup finished in 3.800s (kernel) + 50.280s (userspace) = 54.081s.
Oct 11 05:54:26 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:26 IQ138000 wb-rules[4614]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 05:54:26 IQ138000 wb-rules[4614]: INFO: driver is created
Oct 11 05:54:26 IQ138000 wb-rules[4614]: INFO: [wbgo_mqtt] rules-IQ138000-4614: MQTT connection established
Oct 11 05:54:26 IQ138000 wb-rules[4614]: INFO: driver loop is started
Oct 11 05:54:26 IQ138000 wb-rules[4614]: INFO: wait for driver to become ready
Oct 11 05:54:27 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:27 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:27 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:27 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:28 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:28 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:28 IQ138000 wb-rules[4614]: INFO: driver is ready
Oct 11 05:54:28 IQ138000 wb-rules[4614]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 05:54:28 IQ138000 wb-rules[4614]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4614: MQTT connection established
Oct 11 05:54:28 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:28 IQ138000 wb-rules[4614]: INFO: [engine] Starting main loop
Oct 11 05:54:28 IQ138000 wb-rules[4614]: INFO: [engine] Starting sync loop
Oct 11 05:54:28 IQ138000 wb-rules[4614]: INFO: the engine is ready
Oct 11 05:54:29 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:29 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:29 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:29 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:29 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:54:29 IQ138000 wb-rules[4614]: WARNING: [rule warning] DAC: no config file
Oct 11 05:54:29 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:30 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 05:54:30 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 05:54:30 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 05:54:30 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:30 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:54:30 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 05:54:30 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 02:9c:e8:82:db:1a
Oct 11 05:54:30 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 05:54:30 IQ138000 NetworkManager[405]: <info>  [1760162070.5579] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 05:54:30 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 05:54:30 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 05:54:30 IQ138000 knxd[4957]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:54:30 IQ138000 knxd[4957]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:54:30 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:54:30 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:54:30 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:54:30 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 05:54:30 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 05:54:30 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 05:54:30 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 05:54:30 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 05:54:30 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 systemd-udevd[4963]: Using default interface naming scheme 'v247'.
Oct 11 05:54:30 IQ138000 systemd-udevd[4963]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:30 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:31 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:31 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:32 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 05:54:32 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 python3[1970]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:32 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:33 IQ138000 wb-rules[4614]: INFO: all rule files are loaded
Oct 11 05:54:33 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:33 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 05:54:33 IQ138000 wb-gsm[5027]: mm_on: Waiting for modem to start
Oct 11 05:54:33 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:54:34 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:34 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 05:54:35 IQ138000 npm[3699]: [2025-10-11 05:54:35] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 05:54:35 IQ138000 npm[3699]: [2025-10-11 05:54:35] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 05:54:36 IQ138000 npm[3699]: [2025-10-11 05:54:36] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 05:54:36 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:54:36 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:37 IQ138000 npm[3699]: [2025-10-11 05:54:37] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 05:54:37 IQ138000 npm[3699]: [2025-10-11 05:54:37] info:         zh:zstack:znp: Serialport opened
Oct 11 05:54:37 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:37 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:38 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 05:54:38 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 05:54:38 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 05:54:38 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 05:54:38 IQ138000 wb-mqtt-serial[1677]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 05:54:38 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:38 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 05:54:39 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:39 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: Currently 4 devices are joined.
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 08:54:40.215+00:00
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T08:54:40.215Z","to":"2025-10-11T09:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162260244,"cmd_timestamp_ms":1760162080244,"source":"schedule"}
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162260244,"cmd_timestamp_ms":1760162080244,"source":"schedule"}
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m: Connected to MQTT server
Oct 11 05:54:40 IQ138000 npm[3699]: [2025-10-11 05:54:40] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 08:54:40.489+00:00
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T08:54:40.489Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162260526,"cmd_timestamp_ms":1760162080526,"source":"schedule"}
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162260526,"cmd_timestamp_ms":1760162080526,"source":"schedule"}
Oct 11 05:54:40 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:40 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 05:54:40 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:54:40 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 08:54:40.738+00:00
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T08:54:40.738Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162260786,"cmd_timestamp_ms":1760162080786,"source":"schedule"}
Oct 11 05:54:40 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162260786,"cmd_timestamp_ms":1760162080786,"source":"schedule"}
Oct 11 05:54:40 IQ138000 knxd[5135]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:54:40 IQ138000 knxd[5135]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:54:40 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:54:40 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:54:40 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:40 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:54:40 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:54:40 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:54:40 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:54:40 IQ138000 wb-rules[4614]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 05:54:41 IQ138000 npm[3699]: [2025-10-11 05:54:41] info:         z2m: Started frontend on port 8282
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 08:54:41.061+00:00
Oct 11 05:54:41 IQ138000 npm[3699]: [2025-10-11 05:54:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 05:54:41 IQ138000 npm[3699]: [2025-10-11 05:54:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T08:54:41.061Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261086,"cmd_timestamp_ms":1760162081086,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261086,"cmd_timestamp_ms":1760162081086,"source":"schedule"}
Oct 11 05:54:41 IQ138000 npm[3699]: [2025-10-11 05:54:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 05:54:41 IQ138000 npm[3699]: [2025-10-11 05:54:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 05:54:41 IQ138000 npm[3699]: [2025-10-11 05:54:41] info:         z2m: Zigbee2MQTT started!
Oct 11 05:54:41 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 08:54:41.334+00:00
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T08:54:41.334Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261356,"cmd_timestamp_ms":1760162081356,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261356,"cmd_timestamp_ms":1760162081356,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 08:54:41.384+00:00
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T08:54:41.384Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261399,"cmd_timestamp_ms":1760162081399,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261399,"cmd_timestamp_ms":1760162081399,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 08:54:41.494+00:00
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T08:54:41.494Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261531,"cmd_timestamp_ms":1760162081531,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261531,"cmd_timestamp_ms":1760162081531,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 08:54:41.641+00:00
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T08:54:41.641Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261654,"cmd_timestamp_ms":1760162081654,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162261654,"cmd_timestamp_ms":1760162081654,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 05:54:41 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:41 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 08:54:41.973+00:00
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T08:54:41.973Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162261986,"cmd_timestamp_ms":1760162081986,"source":"schedule"}
Oct 11 05:54:41 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162261986,"cmd_timestamp_ms":1760162081986,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 08:54:42.229+00:00
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T08:54:42.229Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162262245,"cmd_timestamp_ms":1760162082245,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162262245,"cmd_timestamp_ms":1760162082245,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 08:54:42.491+00:00
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T08:54:42.491Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162262506,"cmd_timestamp_ms":1760162082506,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162262506,"cmd_timestamp_ms":1760162082506,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 08:54:42.668+00:00
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T08:54:42.668Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760162262684,"cmd_timestamp_ms":1760162082684,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760162262684,"cmd_timestamp_ms":1760162082684,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 08:54:42.882+00:00
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T08:54:42.882Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760162262891,"cmd_timestamp_ms":1760162082891,"source":"schedule"}
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760162262891,"cmd_timestamp_ms":1760162082891,"source":"schedule"}
Oct 11 05:54:42 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:42 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 08:54:43.017+00:00
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T08:54:43.017Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162263027,"cmd_timestamp_ms":1760162083027,"source":"schedule"}
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162263027,"cmd_timestamp_ms":1760162083027,"source":"schedule"}
Oct 11 05:54:43 IQ138000 wb-watchdog[5238]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 08:54:43.156+00:00
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T08:54:43.156Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162263172,"cmd_timestamp_ms":1760162083172,"source":"schedule"}
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162263172,"cmd_timestamp_ms":1760162083172,"source":"schedule"}
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 05:54:43 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 05:54:44 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:44 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 05:54:44 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 05:54:44 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 05:54:44 IQ138000 wb-rules[4614]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 05:54:44 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:44 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:44 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 05:54:44 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 05:54:44 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 05:54:45 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:45 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:45 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:46 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:46 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:47 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:48 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:49 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:50 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:50 IQ138000 ModemManager[478]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 05:54:50 IQ138000 ModemManager[478]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 05:54:50 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 05:54:50 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:54:50 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:54:51 IQ138000 knxd[5372]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 05:54:51 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:54:51 IQ138000 knxd[5372]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 05:54:51 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 05:54:51 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 05:54:51 IQ138000 ModemManager[478]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 05:54:51 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:54:51 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:51 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:54:51 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:54:52 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 05:54:52 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 05:54:52 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 05:54:52 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 05:54:52 IQ138000 ModemManager[478]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7245] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7281] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7304] device (ttyUSB1): modem state 'enabling'
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7380] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7402] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7447] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7465] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:52 IQ138000 NetworkManager[405]: <info>  [1760162092.7499] manager: NetworkManager state is now CONNECTING
Oct 11 05:54:52 IQ138000 ModemManager[478]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 05:54:52 IQ138000 wb-mqtt-nm-helper[2049]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 05:54:52 IQ138000 ModemManager[478]: <info>  [modem0] power state updated: on
Oct 11 05:54:53 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:54:53 IQ138000 python3[1970]:    --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:54:53 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:54:53 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 05:54:53 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:54:53 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 05:54:53 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 05:54:53 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 05:54:53 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 05:54:53 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 05:54:53 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 05:54:53 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:54:53 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:54:53 IQ138000 python3[1970]:            |                state: enabling
Oct 11 05:54:53 IQ138000 python3[1970]:            |          power state: on
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:54:53 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:54:53 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:54:53 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:54:53 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:54:53 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 05:54:53 IQ138000 python3[1970]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 05:54:53 IQ138000 python3[1970]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 05:54:53 IQ138000 python3[1970]:  successfully requested primary SIM switch in modem
Oct 11 05:54:55 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 05:54:55 IQ138000 wb-rules[4614]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 05:54:55 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 05:54:55 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 05:54:55 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 05:54:55 IQ138000 lsyncd[5424]: 05:54:55 Normal: --- Startup ---
Oct 11 05:54:55 IQ138000 lsyncd[5424]: 05:54:55 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 05:54:55 IQ138000 lsyncd[5424]: journal
Oct 11 05:54:55 IQ138000 lsyncd[5424]: iq_network_manager/iq_network_manager.log
Oct 11 05:54:55 IQ138000 lsyncd[5424]: messages
Oct 11 05:54:55 IQ138000 lsyncd[5432]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 05:54:55 IQ138000 lsyncd[5427]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 05:54:55 IQ138000 lsyncd[5427]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 05:54:55 IQ138000 lsyncd[5424]: 05:54:55 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 05:54:55 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 05:54:55 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 05:54:56 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] simple connect started...
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (6/10): register
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 05:54:57 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 05:54:57 IQ138000 wb-rules[4614]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 05:54:57 IQ138000 NetworkManager[405]: <info>  [1760162097.5336] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:57 IQ138000 NetworkManager[405]: <info>  [1760162097.5349] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 05:54:57 IQ138000 NetworkManager[405]: <info>  [1760162097.5388] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 05:54:57 IQ138000 NetworkManager[405]: <info>  [1760162097.5409] ppp-manager: starting PPP connection
Oct 11 05:54:57 IQ138000 NetworkManager[405]: <info>  [1760162097.5558] ppp-manager: pppd started with pid 5443
Oct 11 05:54:57 IQ138000 pppd[5443]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:54:57 IQ138000 NetworkManager[5443]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: initializing
Oct 11 05:54:57 IQ138000 pppd[5443]: pppd 2.4.9 started by root, uid 0
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 05:54:57 IQ138000 pppd[5443]: Using interface ppp0
Oct 11 05:54:57 IQ138000 NetworkManager[5443]: Using interface ppp0
Oct 11 05:54:57 IQ138000 NetworkManager[5443]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 05:54:57 IQ138000 pppd[5443]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 05:54:57 IQ138000 NetworkManager[405]: <info>  [1760162097.6428] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 05:54:57 IQ138000 pppd[5443]: PAP authentication succeeded
Oct 11 05:54:57 IQ138000 NetworkManager[5443]: PAP authentication succeeded
Oct 11 05:54:57 IQ138000 NetworkManager[5443]: kernel does not support PPP filtering
Oct 11 05:54:57 IQ138000 pppd[5443]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 05:54:57 IQ138000 pppd[5443]: kernel does not support PPP filtering
Oct 11 05:54:57 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 05:54:57 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 05:54:57 IQ138000 ModemManager[478]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 05:54:58 IQ138000 pppd[5443]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:54:58 IQ138000 NetworkManager[5443]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 05:54:58 IQ138000 pppd[5443]: local  IP address 10.96.33.134
Oct 11 05:54:58 IQ138000 NetworkManager[5443]: local  IP address 10.96.33.134
Oct 11 05:54:58 IQ138000 NetworkManager[5443]: remote IP address 10.64.64.64
Oct 11 05:54:58 IQ138000 NetworkManager[5443]: primary   DNS address 172.23.10.130
Oct 11 05:54:58 IQ138000 NetworkManager[5443]: secondary DNS address 172.23.10.131
Oct 11 05:54:58 IQ138000 pppd[5443]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 05:54:58 IQ138000 pppd[5443]: remote IP address 10.64.64.64
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.1972] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 05:54:58 IQ138000 pppd[5443]: primary   DNS address 172.23.10.130
Oct 11 05:54:58 IQ138000 pppd[5443]: secondary DNS address 172.23.10.131
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.2059] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 05:54:58 IQ138000 pppd[5443]: nm-ppp-plugin: ip-up event
Oct 11 05:54:58 IQ138000 pppd[5443]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.2087] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.2114] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.2165] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 05:54:58 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:54:58 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.2985] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:58 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 05:54:58 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 05:54:58 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 05:54:58 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.3920] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.3933] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.3955] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.3979] device (ttyUSB1): Activation: successful, device activated.
Oct 11 05:54:58 IQ138000 NetworkManager[405]: <info>  [1760162098.4020] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 05:54:58 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:58 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 05:54:59 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:59 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:54:59 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:54:59 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:54:59 IQ138000 ntpd[1661]: Listen normally on 4 ppp0 10.96.33.134:123
Oct 11 05:54:59 IQ138000 ntpd[1661]: new interface(s) found: waking up resolver
Oct 11 05:54:59 IQ138000 ntpd[1661]: Soliciting pool server 92.255.126.11
Oct 11 05:55:00 IQ138000 vnstatd[1667]: Info: Interface "ppp0" enabled.
Oct 11 05:55:00 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:55:00 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 05:55:00 IQ138000 ntpd[1661]: Soliciting pool server 185.211.244.47
Oct 11 05:55:01 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 05:55:01 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 05:55:01 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 05:55:01 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 05:55:01 IQ138000 wb-mqtt-knx[2020]: INFO: knxd connected successfully
Oct 11 05:55:01 IQ138000 CRON[5538]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 05:55:01 IQ138000 CRON[5542]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 05:55:01 IQ138000 CRON[5538]: pam_unix(cron:session): session closed for user root
Oct 11 05:55:01 IQ138000 ntpd[1661]: Soliciting pool server 185.209.85.222
Oct 11 05:55:02 IQ138000 ntpd[1661]: Soliciting pool server 193.192.36.3
Oct 11 05:55:02 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 05:55:02 IQ138000 ntpd[1661]: Soliciting pool server 92.255.126.18
Oct 11 05:55:03 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:55:03 IQ138000 python3[1970]: Выполнение: mmcli -i any
Oct 11 05:55:03 IQ138000 python3[1970]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 05:55:03 IQ138000 python3[1970]:    -------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:55:03 IQ138000 python3[1970]:   -------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 05:55:03 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 05:55:03 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 05:55:03 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 05:55:03 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 05:55:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 05:55:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:55:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:55:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:55:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 05:55:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:55:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 05:55:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 05:55:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 05:55:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 05:55:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 05:55:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 05:55:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:55:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:55:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 05:55:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 05:55:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 05:55:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:55:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 05:55:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 05:55:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 05:55:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 05:55:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:55:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:55:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:55:03 IQ138000 python3[1970]: Current state: home
Oct 11 05:55:03 IQ138000 python3[1970]: SIM registered in the network.
Oct 11 05:55:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 05:55:03 IQ138000 ntpd[1661]: Soliciting pool server 213.234.203.30
Oct 11 05:55:03 IQ138000 ntpd[1661]: Soliciting pool server 92.255.126.3
Oct 11 05:55:03 IQ138000 ntpd[1661]: Soliciting pool server 46.160.198.122
Oct 11 05:55:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 05:55:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 05:55:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 05:55:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 05:55:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 05:55:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 05:55:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 05:55:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 05:55:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 05:55:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 05:55:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 05:55:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 05:55:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 05:55:03 IQ138000 python3[1970]:            |                state: connected
Oct 11 05:55:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 05:55:03 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 05:55:03 IQ138000 python3[1970]:            |       signal quality: 93% (recent)
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 05:55:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 05:55:03 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 05:55:03 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 05:55:03 IQ138000 python3[1970]:            |         registration: home
Oct 11 05:55:03 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 05:55:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:55:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 05:55:04 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 05:55:04 IQ138000 python3[1970]:   --------------------------------
Oct 11 05:55:04 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 05:55:04 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:55:04 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 05:55:04 IQ138000 python3[1970]:    -------------------------------
Oct 11 05:55:04 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 05:55:04 IQ138000 python3[1970]:   -------------------------------
Oct 11 05:55:04 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 05:55:04 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 05:55:04 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 05:55:04 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 05:55:04 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 05:55:04 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:55:04 IQ138000 ntpd[1661]: Soliciting pool server 92.255.126.2
Oct 11 05:55:04 IQ138000 ntpd[1661]: Soliciting pool server 195.122.253.38
Oct 11 05:55:04 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 05:55:04 IQ138000 ntpd[1661]: Soliciting pool server 62.76.113.232
Oct 11 05:55:05 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 05:55:05 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 05:55:05 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:55:05 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:55:05 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:55:05 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:55:05 IQ138000 ntpd[1661]: Soliciting pool server 109.195.84.246
Oct 11 05:55:05 IQ138000 ntpd[1661]: Soliciting pool server 188.68.222.140
Oct 11 05:55:05 IQ138000 ntpd[1661]: Soliciting pool server 162.159.200.1
Oct 11 05:55:06 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:55:06 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:55:06 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 05:55:06 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:55:06 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 05:55:06 IQ138000 wb-mqtt-serial[1677]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 05:55:06 IQ138000 ntpd[1661]: Soliciting pool server 90.188.9.144
Oct 11 05:55:06 IQ138000 ntpd[1661]: Soliciting pool server 188.191.80.88
-- Boot 1ca90f30ab1b4c09801fca646231184c --
Oct 11 06:04:58 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 06:04:58 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 06:04:58 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 06:04:58 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 06:04:58 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 06:04:58 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 06:04:58 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 06:04:58 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 06:04:58 IQ138000 kernel: Zone ranges:
Oct 11 06:04:58 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 06:04:58 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 06:04:58 IQ138000 kernel: Movable zone start for each node
Oct 11 06:04:58 IQ138000 kernel: Early memory node ranges
Oct 11 06:04:58 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 06:04:58 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 06:04:58 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 06:04:58 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 06:04:58 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 06:04:58 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 06:04:58 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 06:04:58 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 06:04:58 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 06:04:58 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 06:04:58 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 06:04:58 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 06:04:58 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 06:04:58 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 06:04:58 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 06:04:58 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 06:04:58 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 06:04:58 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 06:04:58 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 06:04:58 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 06:04:58 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 06:04:58 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 06:04:58 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 06:04:58 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 06:04:58 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 06:04:58 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 06:04:58 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 06:04:58 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 06:04:58 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 06:04:58 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 06:04:58 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 06:04:58 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 06:04:58 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 06:04:58 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 06:04:58 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 06:04:58 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 06:04:58 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 06:04:58 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 06:04:58 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 06:04:58 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 06:04:58 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 06:04:58 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 06:04:58 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 06:04:58 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 06:04:58 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 06:04:58 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 06:04:58 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 06:04:58 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 06:04:58 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 06:04:58 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 06:04:58 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 06:04:58 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 06:04:58 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 06:04:58 IQ138000 kernel: devtmpfs: initialized
Oct 11 06:04:58 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 06:04:58 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 06:04:58 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 06:04:58 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 06:04:58 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 06:04:58 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 06:04:58 IQ138000 kernel: No ATAGs?
Oct 11 06:04:58 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 06:04:58 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 06:04:58 IQ138000 kernel: SCSI subsystem initialized
Oct 11 06:04:58 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 06:04:58 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 06:04:58 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 06:04:58 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 06:04:58 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 06:04:58 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 06:04:58 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 06:04:58 IQ138000 kernel: PTP clock support registered
Oct 11 06:04:58 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 06:04:58 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 06:04:58 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 06:04:58 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 06:04:58 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 06:04:58 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 06:04:58 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 06:04:58 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 06:04:58 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 06:04:58 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 06:04:58 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 06:04:58 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 06:04:58 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 06:04:58 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 06:04:58 IQ138000 kernel: Key type id_resolver registered
Oct 11 06:04:58 IQ138000 kernel: Key type id_legacy registered
Oct 11 06:04:58 IQ138000 kernel: Key type asymmetric registered
Oct 11 06:04:58 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 06:04:58 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 06:04:58 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 06:04:58 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 06:04:58 IQ138000 kernel: io scheduler kyber registered
Oct 11 06:04:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 06:04:58 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 06:04:58 IQ138000 kernel: brd: module loaded
Oct 11 06:04:58 IQ138000 kernel: loop: module loaded
Oct 11 06:04:58 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 06:04:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 06:04:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 06:04:58 IQ138000 kernel: CAN device driver interface
Oct 11 06:04:58 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 06:04:58 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 06:04:58 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 06:04:58 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 06:04:58 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 06:04:58 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 06:04:58 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 06:04:58 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 06:04:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 06:04:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 06:04:58 IQ138000 kernel: i2c /dev entries driver
Oct 11 06:04:58 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 06:04:58 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 06:04:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 06:04:58 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 06:04:58 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 06:04:58 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 06:04:58 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 06:04:58 IQ138000 kernel: Segment Routing with IPv6
Oct 11 06:04:58 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 06:04:58 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 06:04:58 IQ138000 kernel: can: controller area network core
Oct 11 06:04:58 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 06:04:58 IQ138000 kernel: can: raw protocol
Oct 11 06:04:58 IQ138000 kernel: can: broadcast manager protocol
Oct 11 06:04:58 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 06:04:58 IQ138000 kernel: can: SAE J1939
Oct 11 06:04:58 IQ138000 kernel: Key type dns_resolver registered
Oct 11 06:04:58 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 06:04:58 IQ138000 kernel: registered taskstats version 1
Oct 11 06:04:58 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 06:04:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 06:04:58 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 06:04:58 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:04:58 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 06:04:58 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 06:04:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 06:04:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 06:04:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T06:04:54 UTC (1760162694)
Oct 11 06:04:58 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 06:04:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 06:04:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 06:04:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 06:04:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 06:04:58 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 06:04:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 06:04:58 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 06:04:58 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 06:04:58 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 06:04:58 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 06:04:58 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 06:04:58 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 06:04:58 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 06:04:58 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: random: fast init done
Oct 11 06:04:58 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 06:04:58 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 06:04:58 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 06:04:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 06:04:58 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 06:04:58 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 06:04:58 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 06:04:58 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 06:04:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 06:04:58 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:04:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 06:04:58 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 06:04:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 06:04:58 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 06:04:58 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 06:04:58 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 06:04:58 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 06:04:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 06:04:58 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 06:04:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 06:04:58 IQ138000 kernel: libphy: stmmac: probed
Oct 11 06:04:58 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 06:04:58 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 06:04:58 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 06:04:58 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 06:04:58 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 06:04:58 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 06:04:58 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 06:04:58 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 06:04:58 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 06:04:58 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 06:04:58 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 06:04:58 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 06:04:58 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 06:04:58 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 06:04:58 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 06:04:58 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 06:04:58 IQ138000 kernel: of_cfs_init
Oct 11 06:04:58 IQ138000 kernel: of_cfs_init: OK
Oct 11 06:04:58 IQ138000 kernel: ALSA device list:
Oct 11 06:04:58 IQ138000 kernel:   No soundcards found.
Oct 11 06:04:58 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 06:04:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 06:04:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 06:04:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 06:04:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 06:04:58 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 06:04:58 IQ138000 kernel: devtmpfs: mounted
Oct 11 06:04:58 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 06:04:58 IQ138000 kernel: Run /sbin/init as init process
Oct 11 06:04:58 IQ138000 kernel:   with arguments:
Oct 11 06:04:58 IQ138000 kernel:     /sbin/init
Oct 11 06:04:58 IQ138000 kernel:   with environment:
Oct 11 06:04:58 IQ138000 kernel:     HOME=/
Oct 11 06:04:58 IQ138000 kernel:     TERM=linux
Oct 11 06:04:58 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 06:04:58 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 06:04:58 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 06:04:58 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 06:04:58 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 06:04:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 06:04:58 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 06:04:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 06:04:58 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 06:04:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 06:04:58 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 06:04:58 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 06:04:58 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 06:04:58 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 06:04:58 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 06:04:58 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 06:04:58 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 06:04:58 IQ138000 systemd[1]: Reached target Paths.
Oct 11 06:04:58 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 06:04:58 IQ138000 systemd[1]: Reached target Slices.
Oct 11 06:04:58 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 06:04:58 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 06:04:58 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 06:04:58 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 06:04:58 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 06:04:58 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 06:04:58 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 06:04:58 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 06:04:58 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 06:04:58 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 06:04:58 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 06:04:58 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 06:04:58 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 06:04:58 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 06:04:58 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 06:04:58 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 06:04:58 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 06:04:58 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 06:04:58 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 06:04:58 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 06:04:58 IQ138000 systemd-journald[139]: Journal started
Oct 11 06:04:58 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 06:04:58 IQ138000 systemd-fsck[142]: rootfs1: clean, 37039/131072 files, 278737/524288 blocks
Oct 11 06:04:58 IQ138000 systemd[1]: Started Journal Service.
Oct 11 06:04:58 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 06:04:58 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 06:04:58 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 06:04:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 06:04:58 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 06:04:58 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 06:04:58 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 06:04:58 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 06:04:58 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 06:04:59 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 06:04:59 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 06:04:59 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 06:04:59 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 06:04:59 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 06:04:59 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 06:04:59 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 06:04:59 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 06:04:59 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 06:04:59 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 06:04:59 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 06:04:59 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 06:04:59 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 06:04:59 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 06:05:00 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 06:05:00 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 06:05:00 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 06:05:00 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 06:05:00 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 06:05:00 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 06:05:00 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 06:05:00 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 06:05:00 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 06:05:00 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 06:05:00 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 06:05:00 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 06:05:00 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 06:05:00 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 06:05:00 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 06:05:00 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 06:05:00 IQ138000 systemd-udevd[161]: eth1: Failed to query device driver: Device or resource busy
Oct 11 06:05:00 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 06:05:00 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 06:05:00 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 06:05:00 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 06:05:00 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 06:05:01 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 06:05:01 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 06:05:01 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 06:05:01 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 06:05:01 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 06:05:01 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 06:05:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 06:05:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 06:05:01 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 06:05:01 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 06:05:01 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 06:05:01 IQ138000 systemd-udevd[166]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 06:05:01 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 06:05:01 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 06:05:01 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 06:05:01 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 06:05:01 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 06:05:01 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 06:05:01 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 06:05:01 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 06:05:01 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 06:05:01 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 06:05:01 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 06:05:01 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 06:05:01 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 06:05:01 IQ138000 systemd[1]: Reached target Swap.
Oct 11 06:05:01 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 06:05:01 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 06:05:01 IQ138000 systemd-fsck[214]: data: clean, 16462/328656 files, 371854/1313536 blocks
Oct 11 06:05:01 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 06:05:01 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 06:05:01 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 06:05:01 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 06:05:01 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 06:05:01 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 06:05:01 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 06:05:02 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 06:05:02 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 06:05:02 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.005ms for 461 entries.
Oct 11 06:05:02 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 06:05:02 IQ138000 kernel: random: crng init done
Oct 11 06:05:02 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 06:05:02 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 06:05:02 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 06:05:02 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 06:05:02 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 06:05:02 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 06:05:02 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 06:05:02 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 06:05:02 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 06:05:02 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 06:05:03 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 06:05:03 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 06:05:03 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 06:05:03 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 06:05:03 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 06:05:03 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 06:05:03 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 06:05:03 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 06:05:03 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 06:05:03 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 06:05:03 IQ138000 systemd[1]: Reached target Timers.
Oct 11 06:05:03 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 06:05:03 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 06:05:03 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 06:05:03 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 06:05:03 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 06:05:03 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 06:05:03 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 06:05:03 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 06:05:03 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 06:05:03 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 06:05:03 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 06:05:03 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 06:05:03 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 06:05:03 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 06:05:03 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 06:05:03 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 06:05:03 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 06:05:03 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 06:05:03 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 06:05:03 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 06:05:03 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 06:05:03 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 06:05:03 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 06:05:03 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 06:05:03 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 06:05:03 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 06:05:03 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 06:05:03 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 06:05:03 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 06:05:03 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 06:05:03 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 06:05:04 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 06:05:04 IQ138000 migrate.sh[322]: Error: No such file or directory
Oct 11 06:05:04 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 06:05:04 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 06:05:04 IQ138000 migrate.sh[332]: Error: No such file or directory
Oct 11 06:05:04 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 06:05:04 IQ138000 migrate.sh[343]: Error: No such file or directory
Oct 11 06:05:04 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 06:05:04 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 06:05:04 IQ138000 systemd[1]: Started watch config files.
Oct 11 06:05:04 IQ138000 reverse-ssh.sh[353]: Error: No such file or directory
Oct 11 06:05:04 IQ138000 migrate.sh[356]: Error: No such file or directory
Oct 11 06:05:04 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 06:05:04 IQ138000 rules-preprocessor[337]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 06:05:04 IQ138000 rules-preprocessor[337]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 06:05:04 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 06:05:04 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 06:05:04 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 06:05:04 IQ138000 migrate.sh[364]: Error: No such file or directory
Oct 11 06:05:04 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 06:05:04 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 06:05:04 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Successfully dropped root privileges.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: avahi-daemon 0.8 starting up.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Successfully called chroot().
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Successfully dropped remaining capabilities.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: No service file found in /etc/avahi/services.
Oct 11 06:05:04 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: New relevant interface lo.IPv6 for mDNS.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: New relevant interface lo.IPv4 for mDNS.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Network interface enumeration completed.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Registering new address record for ::1 on lo.*.
Oct 11 06:05:04 IQ138000 avahi-daemon[367]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 06:05:04 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 06:05:04 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 06:05:04 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 06:05:04 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 06:05:04 IQ138000 systemd-logind[345]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 06:05:04 IQ138000 systemd-logind[345]: New seat seat0.
Oct 11 06:05:04 IQ138000 wpa_supplicant[379]: Successfully initialized wpa_supplicant
Oct 11 06:05:04 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 06:05:04 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 06:05:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 06:05:04 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 06:05:04 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 06:05:04 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:04 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 06:05:04 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 06:05:04 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 06:05:04 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 06:05:04 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 06:05:04 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:04 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 06:05:04 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 06:05:04 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 06:05:04 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 06:05:04 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 06:05:04 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 06:05:04 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 06:05:05 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 06:05:05 IQ138000 systemd[1]: Started User Login Management.
Oct 11 06:05:05 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 06:05:05 IQ138000 monit[324]: Starting daemon monitor: monit.
Oct 11 06:05:05 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 06:05:05 IQ138000 avahi-daemon[367]: Server startup complete. Host name is IQ138000.local. Local service cookie is 2496607331.
Oct 11 06:05:05 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.2057] NetworkManager (version 1.42.4) is starting... (boot:1ca90f30-ab1b-4c09-801f-ca646231184c)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.2061] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.2209] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 06:05:05 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 06:05:05 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.2704] manager[0x716900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 06:05:05 IQ138000 systemd[1]: Started Network Manager.
Oct 11 06:05:05 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 06:05:05 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 06:05:05 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 06:05:05 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 06:05:05 IQ138000 ModemManager[479]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 06:05:05 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 06:05:05 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.8609] hostname: hostname: using hostnamed
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.8612] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.8647] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.8743] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.8772] manager[0x716900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.8786] manager[0x716900]: rfkill: WWAN hardware radio set enabled
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9086] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9188] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9231] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 06:05:05 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9631] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9696] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9734] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9749] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9765] manager: Networking is enabled by state file
Oct 11 06:05:05 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9823] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9826] settings: Loaded settings plugin: keyfile (internal)
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9827] ifupdown: management mode: unmanaged
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9828] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 06:05:05 IQ138000 NetworkManager[405]: <info>  [1760162705.9830] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 06:05:06 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0332] dhcp: init: Using DHCP client 'internal'
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0357] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0472] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0508] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0590] device (lo): Activation: starting connection 'lo' (567efbba-b3b3-4db8-ab45-db8fd0cb9a54)
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0661] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.0744] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:06 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:05:06 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.4309] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.4332] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.4364] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.4448] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 06:05:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 06:05:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 06:05:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 06:05:06 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.6526] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.6602] device (wlan0): driver supports Access Point (AP) mode
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.6656] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 06:05:06 IQ138000 NetworkManager[405]: <info>  [1760162706.6685] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:06 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 06:05:07 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.5155] device (wlan1): driver supports Access Point (AP) mode
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.5219] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.5259] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.5859] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.5950] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.6000] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.6389] modem-manager: ModemManager available
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.6400] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.6530] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.6542] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.6579] device (lo): Activation: successful, device activated.
Oct 11 06:05:07 IQ138000 wpa_supplicant[379]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.9823] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.9830] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.9851] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 06:05:07 IQ138000 NetworkManager[405]: <info>  [1760162707.9881] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0201] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0207] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0230] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0267] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0337] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0477] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0514] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 06:05:08 IQ138000 NetworkManager[405]: <info>  [1760162708.0598] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:08 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 06:05:08 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 06:05:08 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 06:05:11 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 06:05:11 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 06:05:11 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:11 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:05:11 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 06:05:12 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 06:05:12 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 06:05:12 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:12 IQ138000 init.sh[1319]: ...
Oct 11 06:05:12 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 06:05:12 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:12 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 06:05:12 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 06:05:12 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 06:05:12 IQ138000 init.sh[1428]: In file included from -:24:
Oct 11 06:05:12 IQ138000 init.sh[1428]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:12 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:05:12 IQ138000 init.sh[1319]: ...
Oct 11 06:05:12 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 06:05:12 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:13 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 06:05:13 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 06:05:13 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 06:05:13 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 06:05:13 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:13 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 06:05:13 IQ138000 init.sh[1489]: In file included from -:11:
Oct 11 06:05:13 IQ138000 init.sh[1489]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:05:13 IQ138000 init.sh[1319]: ...
Oct 11 06:05:13 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 06:05:13 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 06:05:13 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 06:05:14 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 06:05:14 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 06:05:14 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 06:05:14 IQ138000 systemd[1]: Reached target Network.
Oct 11 06:05:14 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 06:05:14 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 06:05:14 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:05:14 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 06:05:14 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 06:05:14 IQ138000 lsyncd[1614]: 06:05:14 Normal: --- Startup ---
Oct 11 06:05:14 IQ138000 knxd[1607]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:05:14 IQ138000 knxd[1607]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:05:14 IQ138000 lsyncd[1614]: 06:05:14 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 06:05:14 IQ138000 lsyncd[1614]: messages
Oct 11 06:05:14 IQ138000 lsyncd[1614]: iq_network_manager/iq_network_manager.log
Oct 11 06:05:14 IQ138000 lsyncd[1614]: journal
Oct 11 06:05:14 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 06:05:14 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 06:05:14 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 06:05:14 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 06:05:14 IQ138000 lsyncd[1630]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 06:05:14 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 06:05:14 IQ138000 lsyncd[1627]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 06:05:14 IQ138000 lsyncd[1627]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 06:05:14 IQ138000 lsyncd[1614]: 06:05:14 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 06:05:14 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 06:05:14 IQ138000 ntpd[1629]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 06:05:14 IQ138000 ntpd[1629]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 06:05:14 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 06:05:14 IQ138000 ntpd[1629]: ntp-4 is maintained by Network Time Foundation,
Oct 11 06:05:14 IQ138000 ntpd[1629]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 06:05:14 IQ138000 ntpd[1629]: corporation.  Support and training for ntp-4 are
Oct 11 06:05:14 IQ138000 ntpd[1629]: available at https://www.nwtime.org/support
Oct 11 06:05:14 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 06:05:14 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 06:05:14 IQ138000 ntpd[1656]: proto: precision = 1.041 usec (-20)
Oct 11 06:05:14 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 06:05:15 IQ138000 ntpd[1656]: basedate set to 2020-09-11
Oct 11 06:05:15 IQ138000 ntpd[1656]: gps base set to 2020-09-13 (week 2123)
Oct 11 06:05:15 IQ138000 persist_meter_data.sh[1652]: Error: No such file or directory
Oct 11 06:05:15 IQ138000 ntpd[1656]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 06:05:15 IQ138000 ntpd[1656]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 06:05:15 IQ138000 ntpd[1656]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 06:05:15 IQ138000 ntpd[1656]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 06:05:15 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 06:05:15 IQ138000 ntpd[1656]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 06:05:15 IQ138000 ntpd[1656]: Listen normally on 3 lo [::1]:123
Oct 11 06:05:15 IQ138000 ntpd[1656]: Listening on routing socket on fd #20 for interface updates
Oct 11 06:05:15 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 06:05:15 IQ138000 wb-knxd-config.sh[1519]: No /dev/ttyKNX found, disabling level2
Oct 11 06:05:15 IQ138000 wb-knxd-config.sh[1519]: Restart knxd
Oct 11 06:05:15 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 06:05:15 IQ138000 wb-connection-manager[1507]: Connection LegacyWiFi not found, skipping
Oct 11 06:05:15 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 06:05:15 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 06:05:15 IQ138000 wb-mqtt-w1[1682]: MQTT broker localhost:1883
Oct 11 06:05:15 IQ138000 wb-mqtt-w1[1682]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:15 IQ138000 wb-mqtt-w1[1682]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 06:05:15 IQ138000 NetworkManager[405]: <info>  [1760162715.3562] manager: startup complete
Oct 11 06:05:15 IQ138000 wb-mqtt-w1[1682]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 06:05:15 IQ138000 wb-mqtt-w1[1682]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 06:05:15 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:05:15 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 06:05:15 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 06:05:15 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 06:05:15 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 06:05:15 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 06:05:15 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 06:05:15 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:05:15 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 06:05:15 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:15 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:05:15 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 06:05:15 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 06:05:15 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 06:05:15 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 06:05:15 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:15 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 06:05:15 IQ138000 wb-connection-manager[1507]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 06:05:15 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 06:05:15 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 06:05:15 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 06:05:15 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 06:05:15 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 06:05:15 IQ138000 ntpd[1656]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:05:15 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 06:05:15 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 06:05:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 06:05:16 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 06:05:16 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 06:05:16 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 06:05:16 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 06:05:16 IQ138000 vnstatd[1655]: Info: vnStat daemon 2.6 started. (pid:1655 uid:110 gid:117 64-bit)
Oct 11 06:05:16 IQ138000 vnstatd[1655]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 06:05:16 IQ138000 vnstatd[1655]: Info: Interface "ppp0" disabled.
Oct 11 06:05:16 IQ138000 sshd[1732]: Server listening on 0.0.0.0 port 22.
Oct 11 06:05:16 IQ138000 sshd[1732]: Server listening on :: port 22.
Oct 11 06:05:16 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 06:05:16 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <error> [1760162716.3009] audit: failed to open auditd socket: Protocol not supported
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.3013] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1507 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:05:16 IQ138000 wb-connection-manager[1507]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 06:05:16 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:16 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 06:05:16 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 06:05:16 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 06:05:16 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:05:16 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:16 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 06:05:16 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:05:16 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 06:05:16 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 06:05:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 06:05:16 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 06:05:16 IQ138000 knxd[1837]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:05:16 IQ138000 knxd[1837]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:05:16 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 06:05:16 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.7859] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.7866] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1507 uid=0 result="success"
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.7937] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.7958] manager: NetworkManager state is now CONNECTING
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8079] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8122] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8124] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8238] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8289] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8344] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8350] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8352] Config: added 'scan_ssid' value '1'
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8353] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8354] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:05:16 IQ138000 NetworkManager[405]: <info>  [1760162716.8355] Config: added 'psk' value '<hidden>'
Oct 11 06:05:16 IQ138000 reverse-ssh.sh[1869]: Error: No such file or directory
Oct 11 06:05:16 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:05:16 IQ138000 ntpd[1656]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:05:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:05:17 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:17 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 06:05:17 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 06:05:17 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 06:05:17 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Warning: Error resolving bridge address: Name or service not known.
Oct 11 06:05:17 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 06:05:17 IQ138000 mosquitto[1922]: 1760162717: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 06:05:17 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 06:05:17 IQ138000 wb-adjust-systime[1866]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 06:05:17 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 06:05:17 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 06:05:17 IQ138000 wb-adjust-systime[1866]: Drift file is valid (was recently edited)
Oct 11 06:05:17 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 06:05:17 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 06:05:17 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 06:05:17 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 06:05:17 IQ138000 ntpd[1656]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:05:17 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 06:05:18 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: MQTT broker localhost:1883
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: Config file /etc/wb-mqtt-db.conf
Oct 11 06:05:18 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:18 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 06:05:18 IQ138000 wb-mqtt-knx[2035]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:18 IQ138000 wb-mqtt-knx[2035]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:18 IQ138000 systemd[1]: Started metrics sender.
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] Creating tables if necessary
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] Create indices if necessary
Oct 11 06:05:18 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] Analyzing data table
Oct 11 06:05:18 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 06:05:18 IQ138000 wb-mqtt-logs[2043]: MQTT broker localhost:1883
Oct 11 06:05:18 IQ138000 wb-mqtt-logs[2043]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:18 IQ138000 wb-mqtt-logs[2043]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:18 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 06:05:18 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 06:05:18 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:05:18 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.532s CPU time.
Oct 11 06:05:18 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 06:05:18 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 06:05:18 IQ138000 ntpd[1656]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:05:18 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 06:05:19 IQ138000 wb-mqtt-gpio[1799]: INFO: [gpio driver] Started
Oct 11 06:05:19 IQ138000 wb-mqtt-confed[2002]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 06:05:19 IQ138000 wb-mqtt-confed[2002]: INFO: [wbgo_mqtt] confed-IQ138000-2002: MQTT connection established
Oct 11 06:05:19 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:05:19 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 06:05:19 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:05:19 IQ138000 wb-mqtt-iec104[2028]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:05:20 IQ138000 wb-mqtt-iec104[2028]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 06:05:20 IQ138000 wb-mqtt-iec104[2028]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 06:05:20 IQ138000 wb-mqtt-opcua[2215]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 06:05:20 IQ138000 NetworkManager[405]: <info>  [1760162720.0771] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:05:20 IQ138000 NetworkManager[405]: <info>  [1760162720.0774] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:05:20 IQ138000 wb-mqtt-mbgate[2051]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 06:05:20 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 06:05:20 IQ138000 wb-mqtt-opcua[2215]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 06:05:20 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 06:05:20 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 06:05:20 IQ138000 wb-mqtt-iec104[2279]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 06:05:20 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:20 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 06:05:21 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 06:05:21 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 06:05:21 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 06:05:21 IQ138000 wb-mqtt-knx[2035]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:21 IQ138000 wb-mqtt-logs[2043]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:21 IQ138000 wb-mqtt-logs[2043]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:21 IQ138000 wb-mqtt-logs[2043]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:21 IQ138000 wb-mqtt-logs[2043]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 06:05:21 IQ138000 wb-mqtt-knx[2035]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:21 IQ138000 wb-mqtt-knx[2035]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:21 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 06:05:21 IQ138000 wb-mqtt-knx[2035]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 06:05:21 IQ138000 wb-mqtt-knx[2035]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 06:05:21 IQ138000 wb-mqtt-iec104[2279]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 06:05:21 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 06:05:22 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 06:05:23 IQ138000 python3[1971]: No data file found at /tmp/network_status_cache.json
Oct 11 06:05:23 IQ138000 python3[1971]: Connecting to MQTT
Oct 11 06:05:23 IQ138000 python3[1971]: Connected to MQTT
Oct 11 06:05:23 IQ138000 python3[1971]: Connection returned result: Connection Accepted.
Oct 11 06:05:23 IQ138000 wpa_supplicant[379]: wlan0: Reject scan trigger since one is already pending
Oct 11 06:05:25 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2071 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 06:05:25 IQ138000 wb-device-manager[1980]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 06:05:25 IQ138000 wb-device-manager[1980]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New virtual device lo 567efbba-b3b3-4db8-ab45-db8fd0cb9a54 /org/freedesktop/NetworkManager/Settings/7
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 06:05:25 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New active connection lo 567efbba-b3b3-4db8-ab45-db8fd0cb9a54 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 06:05:25 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:25 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:26 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 06:05:26 IQ138000 kernel: dc5ldo: disabling
Oct 11 06:05:26 IQ138000 kernel: dldo4: disabling
Oct 11 06:05:26 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 06:05:26 IQ138000 kernel: vcc-sd: disabling
Oct 11 06:05:27 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:05:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:05:27 IQ138000 knxd[3093]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:05:27 IQ138000 knxd[3093]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:05:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:05:27 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:27 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:05:27 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 06:05:27 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 06:05:27 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 06:05:27 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 06:05:27 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: MQTT broker localhost:1883
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 11
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 11
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 11
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 1
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 1
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 1
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] ADC worker thread is started
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 06:05:27 IQ138000 wb-mqtt-adc[3145]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 06:05:28 IQ138000 wb-mqtt-confed[2002]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 06:05:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 06:05:29 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 06:05:29 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 06:05:29 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 06:05:29 IQ138000 wb-mqtt-serial[1670]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 06:05:29 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] DB initialization is done
Oct 11 06:05:29 IQ138000 wb-gsm[3391]: main: Called from pid 1 (systemd)
Oct 11 06:05:30 IQ138000 wb-gsm[3437]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 06:05:30 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 06:05:30 IQ138000 wb-gsm[3494]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 06:05:30 IQ138000 wb-usb-otg-start.sh[3502]: : wb-usb-otg-start
Oct 11 06:05:30 IQ138000 wb-usb-otg-start.sh[3502]: main: setup_device()
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 06:05:30 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 06:05:30 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 06:05:30 IQ138000 kernel: using random self ethernet address
Oct 11 06:05:30 IQ138000 kernel: using random host ethernet address
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 484)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 491)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 498)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 511)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 524)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 537)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 550)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 563)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 06:05:30 IQ138000 wb-usb-otg-start.sh[3502]: main: enabling profile rndis
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 06:05:30 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 06:05:31 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 06:05:31 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 06:05:31 IQ138000 systemd-udevd[3475]: Using default interface naming scheme 'v247'.
Oct 11 06:05:31 IQ138000 NetworkManager[405]: <info>  [1760162731.1015] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 06:05:31 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 06:05:31 IQ138000 wb-gsm[3547]: should_enable: Should enable GSM modem
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 950)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 957)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 964)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 977)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 990)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1003)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1016)
Oct 11 06:05:31 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 06:05:31 IQ138000 NetworkManager[405]: <info>  [1760162731.2302] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 06:05:31 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 06:05:31 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 06:05:32 IQ138000 wb-gsm[3628]: main: Called from pid 3556 (wb-gsm-mm)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 06:05:32 IQ138000 wb-gsm[3639]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 06:05:32 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 06:05:32 IQ138000 wb-gsm[3663]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 06:05:33 IQ138000 python3[1971]: Выполнение: service wb-connection-manager stop
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 06:05:33 IQ138000 ModemManager[479]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 06:05:33 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 06:05:34 IQ138000 npm[1687]: > zigbee2mqtt@2.1.1 start
Oct 11 06:05:34 IQ138000 npm[1687]: > node index.js
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 06:05:34 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 06:05:34 IQ138000 wb-mqtt-db[2012]: INFO: DB logger started, go to main loop
Oct 11 06:05:34 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:34 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:34 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 06:05:35 IQ138000 wb-mqtt-serial[1670]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 06:05:35 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 06:05:36 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:36 IQ138000 npm[3763]: Starting Zigbee2MQTT without watchdog.
Oct 11 06:05:37 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:37 IQ138000 wb-gsm[4053]: mm_off: Modem is already OFF
Oct 11 06:05:37 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:05:37 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 06:05:37 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 06:05:38 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:38 IQ138000 wb-gsm[4123]: main: Called from pid 3556 (wb-gsm-mm)
Oct 11 06:05:38 IQ138000 wb-gsm[4134]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 06:05:38 IQ138000 wb-gsm[4157]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 06:05:38 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:38 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 06:05:39 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:05:40 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:41 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:05:41 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:41 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 06:05:41 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:41 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 06:05:41 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:41 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:41 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:41 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 06:05:41 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:05:41 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 06:05:41 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 06:05:41 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 06:05:41 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 06:05:41 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 06:05:41 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 06:05:41 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 06:05:41 IQ138000 systemd[1]: Started User command handler service.
Oct 11 06:05:41 IQ138000 knxd[4431]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:05:41 IQ138000 knxd[4431]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: MQTT broker localhost:1883
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:05:41 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:05:41 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:05:41 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:05:41 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: w1 thread Started
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:05:41 IQ138000 wb-mqtt-w1[4444]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:05:41 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 06:05:41 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 06:05:41 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 06:05:41 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.140s CPU time.
Oct 11 06:05:41 IQ138000 python3[1971]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 06:05:41 IQ138000 python3[1971]:  
Oct 11 06:05:42 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:05:42 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <warn>  [1760162742.5292] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <info>  [1760162742.5296] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <info>  [1760162742.5322] manager: NetworkManager state is now DISCONNECTED
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <warn>  [1760162742.5347] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <info>  [1760162742.5363] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:05:42 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <info>  [1760162742.5906] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:05:42 IQ138000 NetworkManager[405]: <info>  [1760162742.5908] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:05:42 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:05:42 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:05:42 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:43 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:05:44 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:05:44 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:05:44 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:05:45 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 06:05:45 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:05:45 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 06:05:46 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:05:46 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 06:05:46 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 06:05:46 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 06:05:46 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 06:05:46 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 06:05:46 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 06:05:46 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 06:05:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 06:05:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 06:05:46 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 06:05:46 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 06:05:46 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 06:05:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 06:05:46 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 06:05:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 06:05:46 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 06:05:46 IQ138000 systemd[1]: Started User command handler service.
Oct 11 06:05:46 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 06:05:46 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 06:05:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:05:46 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 06:05:46 IQ138000 watchdog[4627]: starting daemon (5.16):
Oct 11 06:05:46 IQ138000 watchdog[4627]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 06:05:46 IQ138000 watchdog[4627]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 06:05:46 IQ138000 watchdog[4627]:  ping: no machine to check
Oct 11 06:05:46 IQ138000 watchdog[4627]:  file: no file to check
Oct 11 06:05:46 IQ138000 watchdog[4627]:  pidfile: /var/run/sshd.pid
Oct 11 06:05:46 IQ138000 watchdog[4627]:  interface: no interface to check
Oct 11 06:05:46 IQ138000 watchdog[4627]:  temperature: no sensors to check
Oct 11 06:05:46 IQ138000 watchdog[4627]:  no test binary files
Oct 11 06:05:46 IQ138000 watchdog[4627]:  no repair binary files
Oct 11 06:05:46 IQ138000 watchdog[4627]:  error retry time-out = 30 seconds
Oct 11 06:05:46 IQ138000 watchdog[4627]:  repair attempts = 1
Oct 11 06:05:46 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 06:05:46 IQ138000 watchdog[4627]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 06:05:46 IQ138000 watchdog[4627]: watchdog now set to 120 seconds
Oct 11 06:05:46 IQ138000 watchdog[4627]: hardware watchdog identity: WBEC WDT
Oct 11 06:05:46 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 06:05:46 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 06:05:46 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:46 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 06:05:46 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 06:05:46 IQ138000 systemd[1]: Startup finished in 3.773s (kernel) + 50.383s (userspace) = 54.156s.
Oct 11 06:05:46 IQ138000 wb-rules[4607]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 06:05:46 IQ138000 wb-rules[4607]: INFO: driver is created
Oct 11 06:05:46 IQ138000 wb-rules[4607]: INFO: [wbgo_mqtt] rules-IQ138000-4607: MQTT connection established
Oct 11 06:05:46 IQ138000 wb-rules[4607]: INFO: driver loop is started
Oct 11 06:05:46 IQ138000 wb-rules[4607]: INFO: wait for driver to become ready
Oct 11 06:05:46 IQ138000 python3[1971]: Выполнение: mmcli -m wbc
Oct 11 06:05:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:47 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:47 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:48 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:48 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 4 input(s) @ 12852 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:05:48 IQ138000 wb-rules[4607]: INFO: driver is ready
Oct 11 06:05:48 IQ138000 wb-rules[4607]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 06:05:48 IQ138000 wb-rules[4607]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4607: MQTT connection established
Oct 11 06:05:48 IQ138000 wb-rules[4607]: INFO: [engine] Starting sync loop
Oct 11 06:05:48 IQ138000 wb-rules[4607]: INFO: [engine] Starting main loop
Oct 11 06:05:48 IQ138000 wb-rules[4607]: INFO: the engine is ready
Oct 11 06:05:49 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:50 IQ138000 wb-rules[4607]: WARNING: [rule warning] DAC: no config file
Oct 11 06:05:50 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 06:05:50 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:50 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 06:05:51 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:51 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 06:05:51 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 06:05:51 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 06:05:51 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:05:52 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, e2:f7:87:ed:01:78
Oct 11 06:05:52 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 06:05:52 IQ138000 NetworkManager[405]: <info>  [1760162752.0262] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 06:05:52 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 06:05:52 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 06:05:52 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 06:05:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 06:05:52 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 06:05:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 06:05:52 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 06:05:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 06:05:52 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 06:05:52 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 06:05:52 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 06:05:52 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:05:52 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:05:52 IQ138000 systemd-udevd[4974]: Using default interface naming scheme 'v247'.
Oct 11 06:05:52 IQ138000 systemd-udevd[4974]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 06:05:52 IQ138000 knxd[4981]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:05:52 IQ138000 knxd[4981]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:05:52 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:05:52 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:05:52 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 06:05:52 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:05:52 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:05:52 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-rules[4607]: INFO: all rule files are loaded
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 python3[1971]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:05:53 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:05:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:05:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:05:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:05:54 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:05:55 IQ138000 wb-gsm[5039]: mm_on: Waiting for modem to start
Oct 11 06:05:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:05:55 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:55 IQ138000 wpa_supplicant[379]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:05:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:55 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:56 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:56 IQ138000 npm[3763]: [2025-10-11 06:05:56] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 06:05:56 IQ138000 npm[3763]: [2025-10-11 06:05:56] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 06:05:56 IQ138000 npm[3763]: [2025-10-11 06:05:56] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 06:05:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 06:05:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 06:05:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:56 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:05:57 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:57 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:05:57 IQ138000 npm[3763]: [2025-10-11 06:05:57] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 06:05:57 IQ138000 npm[3763]: [2025-10-11 06:05:57] info:         zh:zstack:znp: Serialport opened
Oct 11 06:05:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 06:05:58 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 06:05:58 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 06:05:58 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 06:05:58 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 06:05:58 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:05:59 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:00 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 09:06:00.355+00:00
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T09:06:00.355Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162940368,"cmd_timestamp_ms":1760162760368,"source":"schedule"}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162940368,"cmd_timestamp_ms":1760162760368,"source":"schedule"}
Oct 11 06:06:00 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 09:06:00.577+00:00
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T09:06:00.577Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162940590,"cmd_timestamp_ms":1760162760590,"source":"schedule"}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162940590,"cmd_timestamp_ms":1760162760590,"source":"schedule"}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 09:06:00.711+00:00
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T09:06:00.711Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162940731,"cmd_timestamp_ms":1760162760731,"source":"schedule"}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162940731,"cmd_timestamp_ms":1760162760731,"source":"schedule"}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 09:06:00.875+00:00
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T09:06:00.875Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162940889,"cmd_timestamp_ms":1760162760889,"source":"schedule"}
Oct 11 06:06:00 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162940889,"cmd_timestamp_ms":1760162760889,"source":"schedule"}
Oct 11 06:06:00 IQ138000 npm[3763]: [2025-10-11 06:06:00] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 06:06:00 IQ138000 npm[3763]: [2025-10-11 06:06:00] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 06:06:00 IQ138000 npm[3763]: [2025-10-11 06:06:00] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m: Currently 4 devices are joined.
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 09:06:01.017+00:00
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T09:06:01.017Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941044,"cmd_timestamp_ms":1760162761044,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941044,"cmd_timestamp_ms":1760162761044,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 09:06:01.159+00:00
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T09:06:01.159Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941188,"cmd_timestamp_ms":1760162761188,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941188,"cmd_timestamp_ms":1760162761188,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 09:06:01.308+00:00
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T09:06:01.308Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941326,"cmd_timestamp_ms":1760162761326,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941326,"cmd_timestamp_ms":1760162761326,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {0}[0]
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 09:06:01.452+00:00
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T09:06:01.452Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941470,"cmd_timestamp_ms":1760162761470,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760162941470,"cmd_timestamp_ms":1760162761470,"source":"schedule"}
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m: Connected to MQTT server
Oct 11 06:06:01 IQ138000 npm[3763]: [2025-10-11 06:06:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 06:06:01 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 09:06:01.768+00:00
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T09:06:01.768Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162941799,"cmd_timestamp_ms":1760162761799,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162941799,"cmd_timestamp_ms":1760162761799,"source":"schedule"}
Oct 11 06:06:01 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:06:01 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:06:01 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:06:01 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:06:01 IQ138000 wb-rules[4607]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 09:06:01.989+00:00
Oct 11 06:06:01 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T09:06:01.989Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162942007,"cmd_timestamp_ms":1760162762007,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162942007,"cmd_timestamp_ms":1760162762007,"source":"schedule"}
Oct 11 06:06:02 IQ138000 npm[3763]: [2025-10-11 06:06:02] info:         z2m: Started frontend on port 8282
Oct 11 06:06:02 IQ138000 npm[3763]: [2025-10-11 06:06:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 06:06:02 IQ138000 npm[3763]: [2025-10-11 06:06:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 06:06:02 IQ138000 npm[3763]: [2025-10-11 06:06:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 06:06:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:02 IQ138000 npm[3763]: [2025-10-11 06:06:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 06:06:02 IQ138000 npm[3763]: [2025-10-11 06:06:02] info:         z2m: Zigbee2MQTT started!
Oct 11 06:06:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:02 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 06:06:02 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:06:02 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 06:06:02 IQ138000 knxd[5199]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:06:02 IQ138000 knxd[5199]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:06:02 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 06:06:02 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:06:02 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 09:06:02.389+00:00
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T09:06:02.389Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162942403,"cmd_timestamp_ms":1760162762403,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760162942403,"cmd_timestamp_ms":1760162762403,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 06:06:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 09:06:02.584+00:00
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T09:06:02.584Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760162942602,"cmd_timestamp_ms":1760162762602,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760162942602,"cmd_timestamp_ms":1760162762602,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:02 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:02 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 09:06:02.820+00:00
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T09:06:02.820Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760162942831,"cmd_timestamp_ms":1760162762831,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760162942831,"cmd_timestamp_ms":1760162762831,"source":"schedule"}
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 09:06:02.986+00:00
Oct 11 06:06:02 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T09:06:02.986Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162943020,"cmd_timestamp_ms":1760162763020,"source":"schedule"}
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162943020,"cmd_timestamp_ms":1760162763020,"source":"schedule"}
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:06:03 IQ138000 wb-watchdog[5233]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 09:06:03.152+00:00
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T09:06:03.152Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162943165,"cmd_timestamp_ms":1760162763165,"source":"schedule"}
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760162943165,"cmd_timestamp_ms":1760162763165,"source":"schedule"}
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:06:03 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 06:06:03 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 06:06:03 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 06:06:04 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 06:06:04 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 06:06:04 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:04 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 06:06:04 IQ138000 wb-rules[4607]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 06:06:04 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:04 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:06:04 IQ138000 systemd[1]: Starting Daily apt upgrade and clean activities...
Oct 11 06:06:04 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 06:06:04 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 06:06:04 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 06:06:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:05 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:05 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:06:06 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:06 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:07 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:06:07 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:09 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:10 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:11 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:12 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:12 IQ138000 ModemManager[479]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 06:06:12 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 06:06:12 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:06:12 IQ138000 ModemManager[479]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 06:06:12 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:06:12 IQ138000 knxd[5389]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:06:12 IQ138000 knxd[5389]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:06:12 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:06:12 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:06:12 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:06:13 IQ138000 ModemManager[479]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 06:06:13 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:13 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:06:13 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 06:06:14 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 06:06:14 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:06:14 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 06:06:14 IQ138000 python3[1971]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:06:14 IQ138000 ModemManager[479]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 06:06:14 IQ138000 ModemManager[479]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.7874] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.7896] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.7918] device (ttyUSB1): modem state 'enabling'
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.7959] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.7999] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.8063] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.8070] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:14 IQ138000 NetworkManager[405]: <info>  [1760162774.8107] manager: NetworkManager state is now CONNECTING
Oct 11 06:06:14 IQ138000 ModemManager[479]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 06:06:14 IQ138000 wb-mqtt-nm-helper[2071]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 06:06:14 IQ138000 ModemManager[479]: <info>  [modem0] power state updated: on
Oct 11 06:06:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:15 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Command: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162955380,"cmd_timestamp_ms":1760162775380,"source":"regulation"}
Oct 11 06:06:15 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760162955380,"cmd_timestamp_ms":1760162775380,"source":"regulation"}
Oct 11 06:06:15 IQ138000 python3[1971]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:06:15 IQ138000 python3[1971]:    --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:06:15 IQ138000 python3[1971]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:06:15 IQ138000 python3[1971]:            |                model: A7602E-H
Oct 11 06:06:15 IQ138000 python3[1971]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:06:15 IQ138000 python3[1971]:            |            supported: gsm-umts
Oct 11 06:06:15 IQ138000 python3[1971]:            |              current: gsm-umts
Oct 11 06:06:15 IQ138000 python3[1971]:            |         equipment id: 860803062234204
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   System   |               device: wbc
Oct 11 06:06:15 IQ138000 python3[1971]:            |              drivers: option, rndis_host
Oct 11 06:06:15 IQ138000 python3[1971]:            |               plugin: simtech
Oct 11 06:06:15 IQ138000 python3[1971]:            |         primary port: ttyUSB1
Oct 11 06:06:15 IQ138000 python3[1971]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:06:15 IQ138000 python3[1971]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:06:15 IQ138000 python3[1971]:            |                state: enabling
Oct 11 06:06:15 IQ138000 python3[1971]:            |          power state: on
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:06:15 IQ138000 python3[1971]:            |              current: allowed: any; preferred: none
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   3GPP     |                 imei: 860803062234204
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:06:15 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:15 IQ138000 python3[1971]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:06:15 IQ138000 python3[1971]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:06:15 IQ138000 python3[1971]:            |                       slot 2: none
Oct 11 06:06:15 IQ138000 python3[1971]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 06:06:15 IQ138000 python3[1971]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 06:06:15 IQ138000 python3[1971]:  successfully requested primary SIM switch in modem
Oct 11 06:06:15 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:06:15 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:06:15 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 06:06:15 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 06:06:15 IQ138000 lsyncd[5434]: 06:06:15 Normal: --- Startup ---
Oct 11 06:06:15 IQ138000 lsyncd[5434]: 06:06:15 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 06:06:15 IQ138000 lsyncd[5434]: journal
Oct 11 06:06:15 IQ138000 lsyncd[5434]: iq_network_manager/iq_network_manager.log
Oct 11 06:06:15 IQ138000 lsyncd[5434]: messages
Oct 11 06:06:15 IQ138000 lsyncd[5436]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 06:06:15 IQ138000 lsyncd[5435]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 06:06:15 IQ138000 lsyncd[5435]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 06:06:15 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:15 IQ138000 lsyncd[5434]: 06:06:15 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 06:06:15 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 06:06:15 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 06:06:16 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:06:16 IQ138000 wb-rules[4607]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 06:06:16 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:16 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 06:06:17 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 06:06:17 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:17 IQ138000 wb-rules[4607]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 06:06:17 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] simple connect started...
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (6/10): register
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 06:06:19 IQ138000 ModemManager[479]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 06:06:19 IQ138000 NetworkManager[405]: <info>  [1760162779.6071] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:19 IQ138000 NetworkManager[405]: <info>  [1760162779.6102] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 06:06:19 IQ138000 NetworkManager[405]: <info>  [1760162779.6151] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 06:06:19 IQ138000 NetworkManager[405]: <info>  [1760162779.6181] ppp-manager: starting PPP connection
Oct 11 06:06:19 IQ138000 NetworkManager[405]: <info>  [1760162779.6316] ppp-manager: pppd started with pid 5468
Oct 11 06:06:19 IQ138000 pppd[5468]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:06:19 IQ138000 NetworkManager[5468]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: initializing
Oct 11 06:06:19 IQ138000 pppd[5468]: pppd 2.4.9 started by root, uid 0
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 06:06:19 IQ138000 pppd[5468]: Using interface ppp0
Oct 11 06:06:19 IQ138000 NetworkManager[5468]: Using interface ppp0
Oct 11 06:06:19 IQ138000 NetworkManager[5468]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 06:06:19 IQ138000 pppd[5468]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 06:06:19 IQ138000 NetworkManager[405]: <info>  [1760162779.7065] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 06:06:19 IQ138000 pppd[5468]: PAP authentication succeeded
Oct 11 06:06:19 IQ138000 pppd[5468]: kernel does not support PPP filtering
Oct 11 06:06:19 IQ138000 pppd[5468]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 06:06:19 IQ138000 NetworkManager[5468]: PAP authentication succeeded
Oct 11 06:06:19 IQ138000 NetworkManager[5468]: kernel does not support PPP filtering
Oct 11 06:06:19 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 06:06:19 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 06:06:20 IQ138000 ModemManager[479]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 06:06:20 IQ138000 pppd[5468]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:06:20 IQ138000 NetworkManager[5468]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:06:20 IQ138000 pppd[5468]: local  IP address 10.0.218.107
Oct 11 06:06:20 IQ138000 pppd[5468]: remote IP address 10.64.64.64
Oct 11 06:06:20 IQ138000 pppd[5468]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 06:06:20 IQ138000 NetworkManager[5468]: local  IP address 10.0.218.107
Oct 11 06:06:20 IQ138000 NetworkManager[5468]: remote IP address 10.64.64.64
Oct 11 06:06:20 IQ138000 NetworkManager[5468]: primary   DNS address 172.23.10.130
Oct 11 06:06:20 IQ138000 NetworkManager[5468]: secondary DNS address 172.23.10.131
Oct 11 06:06:20 IQ138000 pppd[5468]: primary   DNS address 172.23.10.130
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.2993] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:06:20 IQ138000 pppd[5468]: secondary DNS address 172.23.10.131
Oct 11 06:06:20 IQ138000 vnstatd[1655]: Info: Interface "ppp0" enabled.
Oct 11 06:06:20 IQ138000 pppd[5468]: nm-ppp-plugin: ip-up event
Oct 11 06:06:20 IQ138000 pppd[5468]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.3157] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.3188] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.3299] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.3381] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 06:06:20 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.3497] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 06:06:20 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=405 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:06:20 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:06:20 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 06:06:20 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:06:20 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.4427] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.4442] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.4462] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.4520] device (ttyUSB1): Activation: successful, device activated.
Oct 11 06:06:20 IQ138000 NetworkManager[405]: <info>  [1760162780.4606] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 06:06:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:06:20 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:06:21 IQ138000 ntpd[1656]: Listen normally on 4 ppp0 10.0.218.107:123
Oct 11 06:06:21 IQ138000 ntpd[1656]: new interface(s) found: waking up resolver
Oct 11 06:06:21 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 ntpd[1656]: Soliciting pool server 46.160.198.122
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 06:06:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:06:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-knx[2035]: INFO: knxd connected successfully
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:22 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:23 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.2
Oct 11 06:06:23 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:06:23 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:06:23 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:23 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:06:23 IQ138000 wb-mqtt-serial[1670]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:06:23 IQ138000 ntpd[1656]: Soliciting pool server 87.103.245.205
Oct 11 06:06:24 IQ138000 ntpd[1656]: Soliciting pool server 92.255.126.11
Oct 11 06:06:24 IQ138000 ntpd[1656]: Soliciting pool server 89.208.34.110
Oct 11 06:06:24 IQ138000 ntpd[1656]: Soliciting pool server 188.225.9.167
Oct 11 06:06:25 IQ138000 ntpd[1656]: Soliciting pool server 89.109.251.21
Oct 11 06:06:25 IQ138000 python3[1971]: Выполнение: mmcli -i any
Oct 11 06:06:25 IQ138000 python3[1971]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 06:06:25 IQ138000 python3[1971]:    -------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:06:25 IQ138000 python3[1971]:   -------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Properties |            active: yes
Oct 11 06:06:25 IQ138000 python3[1971]:              |              imsi: 250997340491874
Oct 11 06:06:25 IQ138000 python3[1971]:              |             iccid: 8970199210429593744
Oct 11 06:06:25 IQ138000 python3[1971]:              |       operator id: 25099
Oct 11 06:06:25 IQ138000 python3[1971]:              |     operator name: Beeline
Oct 11 06:06:25 IQ138000 python3[1971]: Выполнение: mmcli -m wbc
Oct 11 06:06:25 IQ138000 python3[1971]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:06:25 IQ138000 python3[1971]:    --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:06:25 IQ138000 python3[1971]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:06:25 IQ138000 python3[1971]:            |                model: A7602E-H
Oct 11 06:06:25 IQ138000 python3[1971]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:06:25 IQ138000 python3[1971]:            |            supported: gsm-umts
Oct 11 06:06:25 IQ138000 python3[1971]:            |              current: gsm-umts
Oct 11 06:06:25 IQ138000 python3[1971]:            |         equipment id: 860803062234204
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   System   |               device: wbc
Oct 11 06:06:25 IQ138000 python3[1971]:            |              drivers: option, rndis_host
Oct 11 06:06:25 IQ138000 python3[1971]:            |               plugin: simtech
Oct 11 06:06:25 IQ138000 python3[1971]:            |         primary port: ttyUSB1
Oct 11 06:06:25 IQ138000 python3[1971]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:06:25 IQ138000 python3[1971]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:06:25 IQ138000 python3[1971]:            |                state: connected
Oct 11 06:06:25 IQ138000 python3[1971]:            |          power state: on
Oct 11 06:06:25 IQ138000 python3[1971]:            |          access tech: lte
Oct 11 06:06:25 IQ138000 python3[1971]:            |       signal quality: 93% (recent)
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:06:25 IQ138000 python3[1971]:            |              current: allowed: any; preferred: none
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   3GPP     |                 imei: 860803062234204
Oct 11 06:06:25 IQ138000 python3[1971]:            |          operator id: 25099
Oct 11 06:06:25 IQ138000 python3[1971]:            |        operator name: beeline
Oct 11 06:06:25 IQ138000 python3[1971]:            |         registration: home
Oct 11 06:06:25 IQ138000 python3[1971]:            | packet service state: attached
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:06:25 IQ138000 python3[1971]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:06:25 IQ138000 python3[1971]:            |                       slot 2: none
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:06:25 IQ138000 python3[1971]: Current state: home
Oct 11 06:06:25 IQ138000 python3[1971]: SIM registered in the network.
Oct 11 06:06:25 IQ138000 python3[1971]: Выполнение: mmcli -m wbc
Oct 11 06:06:25 IQ138000 python3[1971]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:06:25 IQ138000 python3[1971]:    --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:06:25 IQ138000 python3[1971]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:06:25 IQ138000 python3[1971]:            |                model: A7602E-H
Oct 11 06:06:25 IQ138000 python3[1971]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:06:25 IQ138000 python3[1971]:            |            supported: gsm-umts
Oct 11 06:06:25 IQ138000 python3[1971]:            |              current: gsm-umts
Oct 11 06:06:25 IQ138000 python3[1971]:            |         equipment id: 860803062234204
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   System   |               device: wbc
Oct 11 06:06:25 IQ138000 python3[1971]:            |              drivers: option, rndis_host
Oct 11 06:06:25 IQ138000 python3[1971]:            |               plugin: simtech
Oct 11 06:06:25 IQ138000 python3[1971]:            |         primary port: ttyUSB1
Oct 11 06:06:25 IQ138000 python3[1971]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:06:25 IQ138000 python3[1971]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:06:25 IQ138000 python3[1971]:            |                state: connected
Oct 11 06:06:25 IQ138000 python3[1971]:            |          power state: on
Oct 11 06:06:25 IQ138000 python3[1971]:            |          access tech: lte
Oct 11 06:06:25 IQ138000 python3[1971]:            |       signal quality: 93% (recent)
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:06:25 IQ138000 python3[1971]:            |              current: allowed: any; preferred: none
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   3GPP     |                 imei: 860803062234204
Oct 11 06:06:25 IQ138000 python3[1971]:            |          operator id: 25099
Oct 11 06:06:25 IQ138000 python3[1971]:            |        operator name: beeline
Oct 11 06:06:25 IQ138000 python3[1971]:            |         registration: home
Oct 11 06:06:25 IQ138000 python3[1971]:            | packet service state: attached
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:06:25 IQ138000 python3[1971]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:06:25 IQ138000 python3[1971]:            |                       slot 2: none
Oct 11 06:06:25 IQ138000 python3[1971]:   --------------------------------
Oct 11 06:06:25 IQ138000 python3[1971]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:06:25 IQ138000 python3[1971]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:06:25 IQ138000 ntpd[1656]: Soliciting pool server 192.36.143.130
Oct 11 06:06:25 IQ138000 ntpd[1656]: Soliciting pool server 91.218.222.71
Oct 11 06:06:25 IQ138000 ntpd[1656]: Soliciting pool server 178.186.166.30
Oct 11 06:06:26 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:26 IQ138000 python3[1971]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:06:26 IQ138000 python3[1971]:    -------------------------------
Oct 11 06:06:26 IQ138000 python3[1971]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:06:26 IQ138000 python3[1971]:   -------------------------------
Oct 11 06:06:26 IQ138000 python3[1971]:   Properties |            active: yes
Oct 11 06:06:26 IQ138000 python3[1971]:              |              imsi: 250997340491874
Oct 11 06:06:26 IQ138000 python3[1971]:              |             iccid: 8970199210429593744
Oct 11 06:06:26 IQ138000 python3[1971]:              |       operator id: 25099
Oct 11 06:06:26 IQ138000 python3[1971]:              |     operator name: Beeline
Oct 11 06:06:26 IQ138000 systemd[1]: apt-daily-upgrade.service: Succeeded.
Oct 11 06:06:26 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:26 IQ138000 systemd[1]: Finished Daily apt upgrade and clean activities.
Oct 11 06:06:26 IQ138000 systemd[1]: apt-daily-upgrade.service: Consumed 5.004s CPU time.
Oct 11 06:06:26 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:06:26 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:26 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:26 IQ138000 ntpd[1656]: Soliciting pool server 82.146.53.58
Oct 11 06:06:26 IQ138000 ntpd[1656]: Soliciting pool server 178.208.255.95
Oct 11 06:06:27 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:06:27 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:27 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:27 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:06:27 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:27 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:06:27 IQ138000 ntpd[1656]: Soliciting pool server 162.159.200.123
Oct 11 06:06:28 IQ138000 wb-mqtt-serial[1670]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:06:28 IQ138000 wb-mqtt-serial[1670]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:06:28 IQ138000 wb-mqtt-serial[1670]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:06:28 IQ138000 ntpd[1656]: Soliciting pool server 2a12:4141:face:6::a
Oct 11 06:06:31 IQ138000 python3[1971]: Выполнение: mmcli -m wbc
-- Boot 8e548c0901b243c9a049f610b8648ec7 --
Oct 11 06:17:03 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 06:17:03 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 06:17:03 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 06:17:03 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 06:17:03 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 06:17:03 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 06:17:03 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 06:17:03 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 06:17:03 IQ138000 kernel: Zone ranges:
Oct 11 06:17:03 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 06:17:03 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 06:17:03 IQ138000 kernel: Movable zone start for each node
Oct 11 06:17:03 IQ138000 kernel: Early memory node ranges
Oct 11 06:17:03 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 06:17:03 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 06:17:03 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 06:17:03 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 06:17:03 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 06:17:03 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 06:17:03 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 06:17:03 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 06:17:03 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 06:17:03 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 06:17:03 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 06:17:03 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 06:17:03 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 06:17:03 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 06:17:03 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 06:17:03 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 06:17:03 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 06:17:03 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 06:17:03 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 06:17:03 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 06:17:03 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 06:17:03 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 06:17:03 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 06:17:03 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 06:17:03 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 06:17:03 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 06:17:03 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 06:17:03 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 06:17:03 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 06:17:03 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 06:17:03 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 06:17:03 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 06:17:03 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 06:17:03 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 06:17:03 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 06:17:03 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 06:17:03 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 06:17:03 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 06:17:03 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 06:17:03 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 06:17:03 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 06:17:03 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 06:17:03 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 06:17:03 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 06:17:03 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 06:17:03 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 06:17:03 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 06:17:03 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 06:17:03 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 06:17:03 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 06:17:03 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 06:17:03 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 06:17:03 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 06:17:03 IQ138000 kernel: devtmpfs: initialized
Oct 11 06:17:03 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 06:17:03 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 06:17:03 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 06:17:03 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 06:17:03 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 06:17:03 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 06:17:03 IQ138000 kernel: No ATAGs?
Oct 11 06:17:03 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 06:17:03 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 06:17:03 IQ138000 kernel: SCSI subsystem initialized
Oct 11 06:17:03 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 06:17:03 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 06:17:03 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 06:17:03 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 06:17:03 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 06:17:03 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 06:17:03 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 06:17:03 IQ138000 kernel: PTP clock support registered
Oct 11 06:17:03 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 06:17:03 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 06:17:03 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 06:17:03 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 06:17:03 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 06:17:03 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 06:17:03 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 06:17:03 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 06:17:03 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 06:17:03 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 06:17:03 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 06:17:03 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 06:17:03 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 06:17:03 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 06:17:03 IQ138000 kernel: Key type id_resolver registered
Oct 11 06:17:03 IQ138000 kernel: Key type id_legacy registered
Oct 11 06:17:03 IQ138000 kernel: Key type asymmetric registered
Oct 11 06:17:03 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 06:17:03 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 06:17:03 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 06:17:03 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 06:17:03 IQ138000 kernel: io scheduler kyber registered
Oct 11 06:17:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 06:17:03 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 06:17:03 IQ138000 kernel: brd: module loaded
Oct 11 06:17:03 IQ138000 kernel: loop: module loaded
Oct 11 06:17:03 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 06:17:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 06:17:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 06:17:03 IQ138000 kernel: CAN device driver interface
Oct 11 06:17:03 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 06:17:03 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 06:17:03 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 06:17:03 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 06:17:03 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 06:17:03 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 06:17:03 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 06:17:03 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 06:17:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 06:17:03 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 06:17:03 IQ138000 kernel: i2c /dev entries driver
Oct 11 06:17:03 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 06:17:03 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 06:17:03 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 06:17:03 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 06:17:03 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 06:17:03 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 06:17:03 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 06:17:03 IQ138000 kernel: Segment Routing with IPv6
Oct 11 06:17:03 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 06:17:03 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 06:17:03 IQ138000 kernel: can: controller area network core
Oct 11 06:17:03 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 06:17:03 IQ138000 kernel: can: raw protocol
Oct 11 06:17:03 IQ138000 kernel: can: broadcast manager protocol
Oct 11 06:17:03 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 06:17:03 IQ138000 kernel: can: SAE J1939
Oct 11 06:17:03 IQ138000 kernel: Key type dns_resolver registered
Oct 11 06:17:03 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 06:17:03 IQ138000 kernel: registered taskstats version 1
Oct 11 06:17:03 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 06:17:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 06:17:03 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 06:17:03 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:17:03 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 06:17:03 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 06:17:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 06:17:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 06:17:03 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T06:16:59 UTC (1760163419)
Oct 11 06:17:03 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 06:17:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 06:17:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 06:17:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 06:17:03 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 06:17:03 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 06:17:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 06:17:03 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 06:17:03 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 06:17:03 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 06:17:03 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 06:17:03 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 06:17:03 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 06:17:03 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 06:17:03 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: random: fast init done
Oct 11 06:17:03 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 06:17:03 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 06:17:03 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 06:17:03 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 06:17:03 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 06:17:03 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 06:17:03 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 06:17:03 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 06:17:03 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 06:17:03 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:17:03 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 06:17:03 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 06:17:03 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 06:17:03 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 06:17:03 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 06:17:03 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 06:17:03 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 06:17:03 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 06:17:03 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 06:17:03 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 06:17:03 IQ138000 kernel: libphy: stmmac: probed
Oct 11 06:17:03 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 06:17:03 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 06:17:03 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 06:17:03 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 06:17:03 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 06:17:03 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 06:17:03 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 06:17:03 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 06:17:03 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 06:17:03 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 06:17:03 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 06:17:03 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 06:17:03 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 06:17:03 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 06:17:03 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 06:17:03 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 06:17:03 IQ138000 kernel: of_cfs_init
Oct 11 06:17:03 IQ138000 kernel: of_cfs_init: OK
Oct 11 06:17:03 IQ138000 kernel: ALSA device list:
Oct 11 06:17:03 IQ138000 kernel:   No soundcards found.
Oct 11 06:17:03 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 06:17:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 06:17:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 06:17:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 06:17:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 06:17:03 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 06:17:03 IQ138000 kernel: devtmpfs: mounted
Oct 11 06:17:03 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 06:17:03 IQ138000 kernel: Run /sbin/init as init process
Oct 11 06:17:03 IQ138000 kernel:   with arguments:
Oct 11 06:17:03 IQ138000 kernel:     /sbin/init
Oct 11 06:17:03 IQ138000 kernel:   with environment:
Oct 11 06:17:03 IQ138000 kernel:     HOME=/
Oct 11 06:17:03 IQ138000 kernel:     TERM=linux
Oct 11 06:17:03 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 06:17:03 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 06:17:03 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 06:17:03 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 06:17:03 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 06:17:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 06:17:03 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 06:17:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 06:17:03 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 06:17:03 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 06:17:03 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 06:17:03 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 06:17:03 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 06:17:03 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 06:17:03 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 06:17:03 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 06:17:03 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 06:17:03 IQ138000 systemd[1]: Reached target Paths.
Oct 11 06:17:03 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 06:17:03 IQ138000 systemd[1]: Reached target Slices.
Oct 11 06:17:03 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 06:17:03 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 06:17:03 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 06:17:03 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 06:17:03 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 06:17:03 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 06:17:03 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 06:17:03 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 06:17:03 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 06:17:03 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 06:17:03 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 06:17:03 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 06:17:03 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 06:17:03 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 06:17:03 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 06:17:03 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 06:17:03 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 06:17:03 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 06:17:03 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 06:17:03 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 06:17:03 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 06:17:03 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 06:17:03 IQ138000 systemd-journald[140]: Journal started
Oct 11 06:17:03 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 06:17:03 IQ138000 systemd-fsck[143]: rootfs1: clean, 37044/131072 files, 278742/524288 blocks
Oct 11 06:17:03 IQ138000 systemd[1]: Started Journal Service.
Oct 11 06:17:03 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 06:17:03 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 06:17:03 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 06:17:03 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 06:17:03 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 06:17:03 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 06:17:03 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 06:17:03 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 06:17:03 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 06:17:03 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 06:17:04 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 06:17:04 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 06:17:04 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 06:17:04 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 06:17:04 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 06:17:04 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 06:17:04 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 06:17:04 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 06:17:04 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 06:17:04 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 06:17:04 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 06:17:04 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 06:17:04 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 06:17:04 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 06:17:04 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 06:17:04 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 06:17:04 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 06:17:04 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 06:17:05 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 06:17:05 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 06:17:05 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 06:17:05 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 06:17:05 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 06:17:05 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 06:17:05 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 06:17:05 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 06:17:05 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 06:17:05 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 06:17:05 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 06:17:05 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 06:17:05 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 06:17:05 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 06:17:05 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 06:17:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 06:17:05 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 06:17:05 IQ138000 systemd-udevd[163]: eth1: Failed to query device driver: Device or resource busy
Oct 11 06:17:05 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 06:17:05 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 06:17:05 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 06:17:05 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 06:17:05 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 06:17:06 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 06:17:06 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 06:17:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 06:17:06 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 06:17:06 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 06:17:06 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 06:17:06 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 06:17:06 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 06:17:06 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 06:17:06 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 06:17:06 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 06:17:06 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 06:17:06 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 06:17:06 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 06:17:06 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 06:17:06 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 06:17:06 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 06:17:06 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 06:17:06 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 06:17:06 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 06:17:06 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 06:17:06 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 06:17:06 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 06:17:06 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 06:17:06 IQ138000 systemd-fsck[213]: data: recovering journal
Oct 11 06:17:06 IQ138000 systemd[1]: Reached target Swap.
Oct 11 06:17:06 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 06:17:06 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 06:17:06 IQ138000 systemd-fsck[213]: data: Clearing orphaned inode 128458 (uid=0, gid=101, mode=0100640, size=8388608)
Oct 11 06:17:06 IQ138000 systemd-fsck[213]: data: clean, 16462/328656 files, 371860/1313536 blocks
Oct 11 06:17:06 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 06:17:06 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 06:17:06 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 06:17:06 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 06:17:06 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 06:17:06 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 06:17:06 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 06:17:06 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 06:17:07 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 06:17:07 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.710ms for 463 entries.
Oct 11 06:17:07 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 06:17:07 IQ138000 kernel: random: crng init done
Oct 11 06:17:07 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 06:17:07 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 06:17:07 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 06:17:07 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 06:17:07 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 06:17:07 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 06:17:07 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 06:17:07 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 06:17:07 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 06:17:07 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 06:17:07 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 06:17:08 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 06:17:08 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 06:17:08 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 06:17:08 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 06:17:08 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 06:17:08 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 06:17:08 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 06:17:08 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 06:17:08 IQ138000 systemd[1]: Reached target Timers.
Oct 11 06:17:08 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 06:17:08 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 06:17:08 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 06:17:08 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 06:17:08 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 06:17:08 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 06:17:08 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 06:17:08 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 06:17:08 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 06:17:08 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 06:17:08 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 06:17:08 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 06:17:08 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 06:17:08 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 06:17:08 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 06:17:08 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 06:17:08 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 06:17:08 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 06:17:08 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 06:17:08 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 06:17:08 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 06:17:08 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 06:17:08 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 06:17:08 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 06:17:08 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 06:17:08 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 06:17:08 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 06:17:08 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 06:17:08 IQ138000 migrate.sh[323]: Error: No such file or directory
Oct 11 06:17:09 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 06:17:09 IQ138000 migrate.sh[335]: Error: No such file or directory
Oct 11 06:17:09 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 06:17:09 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 06:17:09 IQ138000 reverse-ssh.sh[347]: Error: No such file or directory
Oct 11 06:17:09 IQ138000 polkitd[328]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 06:17:09 IQ138000 systemd[1]: Started watch config files.
Oct 11 06:17:09 IQ138000 migrate.sh[346]: Error: No such file or directory
Oct 11 06:17:09 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 06:17:09 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 06:17:09 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 06:17:09 IQ138000 rules-preprocessor[337]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 06:17:09 IQ138000 rules-preprocessor[337]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 06:17:09 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 06:17:09 IQ138000 migrate.sh[362]: Error: No such file or directory
Oct 11 06:17:09 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 06:17:09 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 06:17:09 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Successfully dropped root privileges.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: avahi-daemon 0.8 starting up.
Oct 11 06:17:09 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Successfully called chroot().
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Successfully dropped remaining capabilities.
Oct 11 06:17:09 IQ138000 migrate.sh[374]: Error: No such file or directory
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: No service file found in /etc/avahi/services.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: New relevant interface lo.IPv6 for mDNS.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: New relevant interface lo.IPv4 for mDNS.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Network interface enumeration completed.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Registering new address record for ::1 on lo.*.
Oct 11 06:17:09 IQ138000 avahi-daemon[364]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 06:17:09 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 06:17:09 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 06:17:09 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 06:17:09 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 06:17:09 IQ138000 wpa_supplicant[377]: Successfully initialized wpa_supplicant
Oct 11 06:17:09 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 06:17:09 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 06:17:09 IQ138000 systemd-logind[345]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 06:17:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 06:17:09 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 06:17:09 IQ138000 systemd-logind[345]: New seat seat0.
Oct 11 06:17:09 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 06:17:09 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:09 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 06:17:09 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 06:17:09 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 06:17:09 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 06:17:09 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 06:17:09 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:09 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 06:17:09 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 06:17:09 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 06:17:09 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 06:17:09 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 06:17:09 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 06:17:09 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 06:17:09 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 06:17:10 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 06:17:10 IQ138000 systemd[1]: Started User Login Management.
Oct 11 06:17:10 IQ138000 monit[322]: Starting daemon monitor: monit.
Oct 11 06:17:10 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 06:17:10 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 06:17:10 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 06:17:10 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.2235] NetworkManager (version 1.42.4) is starting... (boot:8e548c09-01b2-43c9-a049-f610b8648ec7)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.2240] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 06:17:10 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 06:17:10 IQ138000 avahi-daemon[364]: Server startup complete. Host name is IQ138000.local. Local service cookie is 2003446495.
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.2451] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 06:17:10 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 06:17:10 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.3329] manager[0x666900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 06:17:10 IQ138000 systemd[1]: Started Network Manager.
Oct 11 06:17:10 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 06:17:10 IQ138000 ModemManager[469]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 06:17:10 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 06:17:10 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7221] hostname: hostname: using hostnamed
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7225] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7261] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7359] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7379] manager[0x666900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7381] manager[0x666900]: rfkill: WWAN hardware radio set enabled
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7677] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7782] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.7826] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8107] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8157] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8206] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8212] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8217] manager: Networking is enabled by state file
Oct 11 06:17:10 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8292] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8296] settings: Loaded settings plugin: keyfile (internal)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8297] ifupdown: management mode: unmanaged
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8299] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8301] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 06:17:10 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8841] dhcp: init: Using DHCP client 'internal'
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.8867] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.9014] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.9067] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.9149] device (lo): Activation: starting connection 'lo' (ffad80e9-4e4d-4a35-90b4-2d01767ca77c)
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.9235] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 06:17:10 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 06:17:10 IQ138000 NetworkManager[403]: <info>  [1760163430.9283] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:10 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:17:10 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.2813] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.2845] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.2931] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.2985] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 06:17:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 06:17:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 06:17:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 06:17:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.4897] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.4956] device (wlan0): driver supports Access Point (AP) mode
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.5030] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 06:17:11 IQ138000 NetworkManager[403]: <info>  [1760163431.5072] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:11 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 06:17:12 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.3461] device (wlan1): driver supports Access Point (AP) mode
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.3511] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.3540] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.4562] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 wpa_supplicant[377]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.4608] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.4645] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.4742] modem-manager: ModemManager available
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.4785] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.5035] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.5048] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.5090] device (lo): Activation: successful, device activated.
Oct 11 06:17:12 IQ138000 wpa_supplicant[377]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8095] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8103] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8124] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8159] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8271] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8279] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8325] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8345] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8379] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8417] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8434] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 06:17:12 IQ138000 NetworkManager[403]: <info>  [1760163432.8476] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:13 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 06:17:13 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 06:17:13 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 06:17:16 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:17:16 IQ138000 init.sh[1317]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 06:17:16 IQ138000 init.sh[1332]: In file included from -:16:
Oct 11 06:17:16 IQ138000 init.sh[1332]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:16 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:17:16 IQ138000 init.sh[1317]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 06:17:16 IQ138000 init.sh[1317]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 06:17:16 IQ138000 init.sh[1392]: In file included from -:11:
Oct 11 06:17:16 IQ138000 init.sh[1392]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:17 IQ138000 init.sh[1317]: ...
Oct 11 06:17:17 IQ138000 init.sh[1407]: In file included from -:11:
Oct 11 06:17:17 IQ138000 init.sh[1407]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:17 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 06:17:17 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 06:17:17 IQ138000 init.sh[1317]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 06:17:17 IQ138000 init.sh[1426]: In file included from -:24:
Oct 11 06:17:17 IQ138000 init.sh[1426]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:17 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 06:17:17 IQ138000 init.sh[1317]: ...
Oct 11 06:17:17 IQ138000 init.sh[1442]: In file included from -:24:
Oct 11 06:17:17 IQ138000 init.sh[1442]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:18 IQ138000 init.sh[1317]: failsafe bias enabled
Oct 11 06:17:18 IQ138000 init.sh[1317]: terminators are enabled
Oct 11 06:17:18 IQ138000 init.sh[1317]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 06:17:18 IQ138000 init.sh[1464]: In file included from -:11:
Oct 11 06:17:18 IQ138000 init.sh[1464]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:18 IQ138000 init.sh[1317]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 06:17:18 IQ138000 init.sh[1487]: In file included from -:11:
Oct 11 06:17:18 IQ138000 init.sh[1487]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 06:17:18 IQ138000 init.sh[1317]: ...
Oct 11 06:17:18 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 06:17:18 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 06:17:18 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 06:17:18 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 06:17:19 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 06:17:19 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 06:17:19 IQ138000 systemd[1]: Reached target Network.
Oct 11 06:17:19 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 06:17:19 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 06:17:19 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:17:19 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 06:17:19 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 06:17:19 IQ138000 lsyncd[1616]: 06:17:19 Normal: --- Startup ---
Oct 11 06:17:19 IQ138000 lsyncd[1616]: 06:17:19 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 06:17:19 IQ138000 lsyncd[1616]: journal
Oct 11 06:17:19 IQ138000 lsyncd[1616]: iq_network_manager/iq_network_manager.log
Oct 11 06:17:19 IQ138000 lsyncd[1616]: messages
Oct 11 06:17:19 IQ138000 knxd[1611]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:17:19 IQ138000 knxd[1611]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:17:19 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 06:17:19 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 06:17:19 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 06:17:19 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 06:17:19 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 06:17:19 IQ138000 lsyncd[1630]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 06:17:19 IQ138000 lsyncd[1626]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 06:17:19 IQ138000 lsyncd[1626]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 06:17:19 IQ138000 ntpd[1628]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 06:17:19 IQ138000 lsyncd[1616]: 06:17:19 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 06:17:19 IQ138000 ntpd[1628]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 06:17:19 IQ138000 ntpd[1628]: ----------------------------------------------------
Oct 11 06:17:19 IQ138000 ntpd[1628]: ntp-4 is maintained by Network Time Foundation,
Oct 11 06:17:19 IQ138000 ntpd[1628]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 06:17:19 IQ138000 ntpd[1628]: corporation.  Support and training for ntp-4 are
Oct 11 06:17:19 IQ138000 ntpd[1628]: available at https://www.nwtime.org/support
Oct 11 06:17:19 IQ138000 ntpd[1628]: ----------------------------------------------------
Oct 11 06:17:19 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 06:17:19 IQ138000 ntpd[1651]: proto: precision = 1.000 usec (-20)
Oct 11 06:17:19 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 06:17:19 IQ138000 persist_meter_data.sh[1653]: Error: No such file or directory
Oct 11 06:17:19 IQ138000 ntpd[1651]: basedate set to 2020-09-11
Oct 11 06:17:19 IQ138000 ntpd[1651]: gps base set to 2020-09-13 (week 2123)
Oct 11 06:17:19 IQ138000 ntpd[1651]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 06:17:19 IQ138000 ntpd[1651]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 06:17:19 IQ138000 ntpd[1651]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 06:17:19 IQ138000 ntpd[1651]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 06:17:19 IQ138000 ntpd[1651]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 06:17:19 IQ138000 ntpd[1651]: Listen normally on 3 lo [::1]:123
Oct 11 06:17:19 IQ138000 ntpd[1651]: Listening on routing socket on fd #20 for interface updates
Oct 11 06:17:19 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 06:17:19 IQ138000 wb-knxd-config.sh[1514]: No /dev/ttyKNX found, disabling level2
Oct 11 06:17:19 IQ138000 wb-knxd-config.sh[1514]: Restart knxd
Oct 11 06:17:19 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 06:17:20 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 06:17:20 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 06:17:20 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 06:17:20 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 06:17:20 IQ138000 wb-mqtt-w1[1683]: MQTT broker localhost:1883
Oct 11 06:17:20 IQ138000 wb-mqtt-w1[1683]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:20 IQ138000 wb-mqtt-w1[1683]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 06:17:20 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:17:20 IQ138000 wb-mqtt-w1[1683]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 06:17:20 IQ138000 wb-mqtt-w1[1683]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 06:17:20 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 06:17:20 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 06:17:20 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 06:17:20 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 06:17:20 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 06:17:20 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 06:17:20 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:20 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:17:20 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 06:17:20 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 06:17:20 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 06:17:20 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:20 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 06:17:20 IQ138000 wb-connection-manager[1504]: Connection LegacyWiFi not found, skipping
Oct 11 06:17:20 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 06:17:20 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 06:17:20 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 06:17:20 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 06:17:20 IQ138000 wb-connection-manager[1504]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 06:17:20 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 06:17:20 IQ138000 ntpd[1651]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:17:20 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 06:17:20 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 06:17:20 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 06:17:20 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 06:17:20 IQ138000 sshd[1740]: Server listening on 0.0.0.0 port 22.
Oct 11 06:17:20 IQ138000 sshd[1740]: Server listening on :: port 22.
Oct 11 06:17:20 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 06:17:20 IQ138000 wb-connection-manager[1504]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 06:17:21 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 06:17:21 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 06:17:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 06:17:21 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 06:17:21 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 06:17:21 IQ138000 vnstatd[1654]: Info: vnStat daemon 2.6 started. (pid:1654 uid:110 gid:117 64-bit)
Oct 11 06:17:21 IQ138000 vnstatd[1654]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 06:17:21 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 06:17:21 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:21 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 06:17:21 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:21 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 06:17:21 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 06:17:21 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 06:17:21 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 06:17:21 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 06:17:21 IQ138000 NetworkManager[403]: <error> [1760163441.5443] audit: failed to open auditd socket: Protocol not supported
Oct 11 06:17:21 IQ138000 NetworkManager[403]: <info>  [1760163441.5447] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1504 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:17:21 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 06:17:21 IQ138000 wb-connection-manager[1504]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 06:17:21 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 06:17:21 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 06:17:21 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 06:17:21 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 06:17:21 IQ138000 reverse-ssh.sh[1871]: Error: No such file or directory
Oct 11 06:17:21 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:21 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 06:17:21 IQ138000 ntpd[1651]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:17:22 IQ138000 wb-adjust-systime[1867]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 06:17:22 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:17:22 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2482] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2488] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1504 uid=0 result="success"
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2496] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2518] manager: NetworkManager state is now CONNECTING
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2696] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2721] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.2723] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:22 IQ138000 wb-adjust-systime[1867]: Drift file is valid (was recently edited)
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3212] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3233] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3250] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3255] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3256] Config: added 'scan_ssid' value '1'
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3257] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3258] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.3259] Config: added 'psk' value '<hidden>'
Oct 11 06:17:22 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 06:17:22 IQ138000 knxd[1931]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:17:22 IQ138000 knxd[1931]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:17:22 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:17:22 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:22 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Warning: Error resolving bridge address: Name or service not known.
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 06:17:22 IQ138000 mosquitto[1938]: 1760163442: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 06:17:22 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 06:17:22 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 06:17:22 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.6796] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:17:22 IQ138000 NetworkManager[403]: <info>  [1760163442.6799] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:17:22 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 06:17:22 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 06:17:22 IQ138000 ntpd[1651]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:17:22 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 06:17:22 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 06:17:23 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 06:17:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: MQTT broker localhost:1883
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: Config file /etc/wb-mqtt-db.conf
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:23 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 06:17:23 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: INFO: [sqlite] Creating tables if necessary
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: INFO: [sqlite] Create indices if necessary
Oct 11 06:17:23 IQ138000 wb-mqtt-db[2041]: INFO: [sqlite] Analyzing data table
Oct 11 06:17:23 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 06:17:23 IQ138000 systemd[1]: Started metrics sender.
Oct 11 06:17:23 IQ138000 wb-mqtt-knx[2068]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:23 IQ138000 wb-mqtt-knx[2068]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:23 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 06:17:23 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 06:17:23 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 06:17:23 IQ138000 wb-mqtt-logs[2073]: MQTT broker localhost:1883
Oct 11 06:17:23 IQ138000 wb-mqtt-logs[2073]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:23 IQ138000 wb-mqtt-logs[2073]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [gpio driver] Started
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 06:17:23 IQ138000 wb-mqtt-gpio[1803]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 06:17:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:17:23 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.532s CPU time.
Oct 11 06:17:23 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 06:17:23 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 06:17:23 IQ138000 ntpd[1651]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2098]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:17:24 IQ138000 wb-mqtt-confed[2033]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 06:17:24 IQ138000 wb-mqtt-confed[2033]: INFO: [wbgo_mqtt] confed-IQ138000-2033: MQTT connection established
Oct 11 06:17:24 IQ138000 wb-mqtt-mbgate[2079]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 06:17:24 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:24 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 06:17:24 IQ138000 wb-mqtt-iec104[2055]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 06:17:24 IQ138000 wb-mqtt-opcua[2208]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 06:17:25 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 06:17:25 IQ138000 wb-mqtt-iec104[2251]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 06:17:25 IQ138000 wb-mqtt-opcua[2208]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 06:17:25 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 06:17:25 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 06:17:25 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:25 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 06:17:25 IQ138000 wb-mqtt-iec104[2251]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 06:17:25 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 06:17:26 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 06:17:26 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 06:17:26 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 06:17:26 IQ138000 wb-mqtt-logs[2073]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:26 IQ138000 wb-mqtt-logs[2073]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:26 IQ138000 wb-mqtt-logs[2073]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:26 IQ138000 wb-mqtt-logs[2073]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 06:17:26 IQ138000 wb-mqtt-knx[2068]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:26 IQ138000 wb-mqtt-knx[2068]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:26 IQ138000 wb-mqtt-knx[2068]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:26 IQ138000 wb-mqtt-knx[2068]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 06:17:26 IQ138000 wb-mqtt-knx[2068]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 06:17:27 IQ138000 NetworkManager[403]: <info>  [1760163447.8422] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:17:27 IQ138000 NetworkManager[403]: <info>  [1760163447.8425] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:17:28 IQ138000 python3[2000]: No data file found at /tmp/network_status_cache.json
Oct 11 06:17:28 IQ138000 python3[2000]: Connecting to MQTT
Oct 11 06:17:28 IQ138000 python3[2000]: Connected to MQTT
Oct 11 06:17:28 IQ138000 python3[2000]: Connection returned result: Connection Accepted.
Oct 11 06:17:29 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2091 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 06:17:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New virtual device lo ffad80e9-4e4d-4a35-90b4-2d01767ca77c /org/freedesktop/NetworkManager/Settings/7
Oct 11 06:17:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 06:17:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection lo ffad80e9-4e4d-4a35-90b4-2d01767ca77c /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 06:17:30 IQ138000 wb-device-manager[2012]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 06:17:30 IQ138000 wb-device-manager[2012]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 06:17:30 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:30 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:31 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 06:17:31 IQ138000 kernel: dc5ldo: disabling
Oct 11 06:17:31 IQ138000 kernel: dldo4: disabling
Oct 11 06:17:31 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 06:17:31 IQ138000 kernel: vcc-sd: disabling
Oct 11 06:17:31 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 06:17:31 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 06:17:31 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 06:17:32 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 06:17:32 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: MQTT broker localhost:1883
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] ADC worker thread is started
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 06:17:32 IQ138000 wb-mqtt-adc[3108]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 06:17:32 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:17:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:17:32 IQ138000 knxd[3208]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:17:32 IQ138000 knxd[3208]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:17:32 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:17:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:17:32 IQ138000 wb-mqtt-confed[2033]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-gsm[3328]: main: Called from pid 1 (systemd)
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 06:17:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 06:17:34 IQ138000 wb-gsm[3374]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 06:17:34 IQ138000 wb-usb-otg-start.sh[3421]: : wb-usb-otg-start
Oct 11 06:17:34 IQ138000 wb-usb-otg-start.sh[3421]: main: setup_device()
Oct 11 06:17:34 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 06:17:34 IQ138000 wb-mqtt-db[2041]: INFO: [sqlite] DB initialization is done
Oct 11 06:17:34 IQ138000 wb-gsm[3441]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 06:17:34 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 06:17:34 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 06:17:34 IQ138000 kernel: using random self ethernet address
Oct 11 06:17:34 IQ138000 kernel: using random host ethernet address
Oct 11 06:17:34 IQ138000 wb-usb-otg-start.sh[3421]: main: enabling profile rndis
Oct 11 06:17:34 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 06:17:34 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 06:17:34 IQ138000 systemd-udevd[3419]: Using default interface naming scheme 'v247'.
Oct 11 06:17:34 IQ138000 NetworkManager[403]: <info>  [1760163454.7046] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 06:17:34 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 06:17:34 IQ138000 NetworkManager[403]: <info>  [1760163454.8719] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:17:34 IQ138000 wb-gsm[3498]: should_enable: Should enable GSM modem
Oct 11 06:17:34 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 06:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 06:17:36 IQ138000 wb-gsm[3573]: main: Called from pid 3499 (wb-gsm-mm)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 06:17:36 IQ138000 wb-gsm[3584]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 06:17:36 IQ138000 wb-gsm[3607]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 06:17:36 IQ138000 NetworkManager[403]: <info>  [1760163456.6294] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:17:36 IQ138000 NetworkManager[403]: <info>  [1760163456.6297] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 06:17:36 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 06:17:36 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: DB logger started, go to main loop
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 06:17:37 IQ138000 ModemManager[469]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 06:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 06:17:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 06:17:38 IQ138000 python3[2000]: Выполнение: service wb-connection-manager stop
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 06:17:38 IQ138000 npm[1691]: > zigbee2mqtt@2.1.1 start
Oct 11 06:17:38 IQ138000 npm[1691]: > node index.js
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 06:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 06:17:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 06:17:40 IQ138000 wb-gsm[3997]: mm_off: Modem is already OFF
Oct 11 06:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:41 IQ138000 npm[3801]: Starting Zigbee2MQTT without watchdog.
Oct 11 06:17:41 IQ138000 wb-gsm[4067]: main: Called from pid 3499 (wb-gsm-mm)
Oct 11 06:17:41 IQ138000 wb-gsm[4078]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 06:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:41 IQ138000 wb-gsm[4102]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 06:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 06:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 06:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 06:17:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 06:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 06:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 06:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 06:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:17:46 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 06:17:46 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:46 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:46 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 06:17:46 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:46 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 06:17:46 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:17:46 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 06:17:46 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 06:17:46 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 06:17:46 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 06:17:46 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: MQTT broker localhost:1883
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 06:17:46 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 06:17:46 IQ138000 systemd[1]: Started User command handler service.
Oct 11 06:17:46 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 06:17:46 IQ138000 knxd[4501]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:17:46 IQ138000 knxd[4501]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:17:46 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: w1 thread Started
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 06:17:46 IQ138000 wb-mqtt-w1[4506]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 06:17:46 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 06:17:46 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 06:17:46 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 06:17:46 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.187s CPU time.
Oct 11 06:17:46 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:46 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:17:46 IQ138000 python3[2000]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 06:17:46 IQ138000 python3[2000]:  
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <warn>  [1760163467.5299] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <info>  [1760163467.5301] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <info>  [1760163467.5323] manager: NetworkManager state is now DISCONNECTED
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <warn>  [1760163467.5345] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <info>  [1760163467.5360] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:17:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <info>  [1760163467.5645] manager: startup complete
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <info>  [1760163467.5689] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:17:47 IQ138000 NetworkManager[403]: <info>  [1760163467.5691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:17:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 06:17:47 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 06:17:47 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 06:17:47 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:47 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:17:48 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:17:48 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 06:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:17:48 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 06:17:48 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 06:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 06:17:51 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:17:51 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 06:17:51 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 06:17:51 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 06:17:51 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 06:17:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 06:17:51 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 06:17:51 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 06:17:51 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 06:17:51 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 06:17:51 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 06:17:51 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 06:17:51 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 06:17:51 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 06:17:51 IQ138000 systemd[1]: Started User command handler service.
Oct 11 06:17:51 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 06:17:51 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 06:17:51 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 06:17:51 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 06:17:51 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 06:17:51 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 06:17:51 IQ138000 watchdog[4619]: starting daemon (5.16):
Oct 11 06:17:51 IQ138000 watchdog[4619]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 06:17:51 IQ138000 watchdog[4619]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 06:17:51 IQ138000 watchdog[4619]:  ping: no machine to check
Oct 11 06:17:51 IQ138000 watchdog[4619]:  file: no file to check
Oct 11 06:17:51 IQ138000 watchdog[4619]:  pidfile: /var/run/sshd.pid
Oct 11 06:17:51 IQ138000 watchdog[4619]:  interface: no interface to check
Oct 11 06:17:51 IQ138000 watchdog[4619]:  temperature: no sensors to check
Oct 11 06:17:51 IQ138000 watchdog[4619]:  no test binary files
Oct 11 06:17:51 IQ138000 watchdog[4619]:  no repair binary files
Oct 11 06:17:51 IQ138000 watchdog[4619]:  error retry time-out = 30 seconds
Oct 11 06:17:51 IQ138000 watchdog[4619]:  repair attempts = 1
Oct 11 06:17:51 IQ138000 watchdog[4619]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 06:17:51 IQ138000 watchdog[4619]: watchdog now set to 120 seconds
Oct 11 06:17:51 IQ138000 watchdog[4619]: hardware watchdog identity: WBEC WDT
Oct 11 06:17:51 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 06:17:51 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 06:17:51 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 06:17:51 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 06:17:51 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 06:17:51 IQ138000 systemd[1]: Startup finished in 3.788s (kernel) + 50.210s (userspace) = 53.998s.
Oct 11 06:17:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:17:51 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:51 IQ138000 wb-rules[4612]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 06:17:51 IQ138000 wb-rules[4612]: INFO: driver is created
Oct 11 06:17:51 IQ138000 wb-rules[4612]: INFO: [wbgo_mqtt] rules-IQ138000-4612: MQTT connection established
Oct 11 06:17:51 IQ138000 wb-rules[4612]: INFO: driver loop is started
Oct 11 06:17:51 IQ138000 wb-rules[4612]: INFO: wait for driver to become ready
Oct 11 06:17:52 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:53 IQ138000 wb-rules[4612]: INFO: driver is ready
Oct 11 06:17:53 IQ138000 wb-rules[4612]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 06:17:53 IQ138000 wb-rules[4612]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4612: MQTT connection established
Oct 11 06:17:53 IQ138000 wb-rules[4612]: INFO: [engine] Starting main loop
Oct 11 06:17:53 IQ138000 wb-rules[4612]: INFO: the engine is ready
Oct 11 06:17:53 IQ138000 wb-rules[4612]: INFO: [engine] Starting sync loop
Oct 11 06:17:53 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:54 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 06:17:54 IQ138000 wb-rules[4612]: WARNING: [rule warning] DAC: no config file
Oct 11 06:17:55 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 06:17:55 IQ138000 NetworkManager[403]: <info>  [1760163475.1119] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 06:17:55 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 36:70:e9:4d:56:96
Oct 11 06:17:55 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 06:17:55 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 06:17:55 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 06:17:55 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 06:17:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 06:17:55 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:17:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 06:17:55 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 06:17:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 06:17:55 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:55 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:55 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 06:17:55 IQ138000 systemd-udevd[4887]: Using default interface naming scheme 'v247'.
Oct 11 06:17:55 IQ138000 systemd-udevd[4887]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:17:55 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:55 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 06:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 06:17:56 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:17:56 IQ138000 knxd[4994]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:17:56 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:17:56 IQ138000 knxd[4994]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:17:56 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:17:56 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:17:57 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:17:58 IQ138000 wb-gsm[5015]: mm_on: Waiting for modem to start
Oct 11 06:17:58 IQ138000 wb-rules[4612]: INFO: all rule files are loaded
Oct 11 06:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:17:58 IQ138000 python3[2000]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 06:17:58 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:17:59 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 06:18:00 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 npm[3801]: [2025-10-11 06:18:01] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 npm[3801]: [2025-10-11 06:18:01] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 06:18:01 IQ138000 npm[3801]: [2025-10-11 06:18:01] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:01 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:18:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:02 IQ138000 npm[3801]: [2025-10-11 06:18:02] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 06:18:02 IQ138000 npm[3801]: [2025-10-11 06:18:02] info:         zh:zstack:znp: Serialport opened
Oct 11 06:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:02 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 06:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:04 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 06:18:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 06:18:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 06:18:05 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 09:18:05.533+00:00
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T09:18:05.533Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: Currently 4 devices are joined.
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163665552,"cmd_timestamp_ms":1760163485552,"source":"schedule"}
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163665552,"cmd_timestamp_ms":1760163485552,"source":"schedule"}
Oct 11 06:18:05 IQ138000 npm[3801]: [2025-10-11 06:18:05] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 09:18:05.778+00:00
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T09:18:05.778Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760163665799,"cmd_timestamp_ms":1760163485799,"source":"schedule"}
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760163665799,"cmd_timestamp_ms":1760163485799,"source":"schedule"}
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 09:18:05.904+00:00
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T09:18:05.904Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163665919,"cmd_timestamp_ms":1760163485919,"source":"schedule"}
Oct 11 06:18:05 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163665919,"cmd_timestamp_ms":1760163485919,"source":"schedule"}
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m: Connected to MQTT server
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 09:18:06.069+00:00
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T09:18:06.069Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666089,"cmd_timestamp_ms":1760163486089,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666089,"cmd_timestamp_ms":1760163486089,"source":"schedule"}
Oct 11 06:18:06 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 09:18:06.207+00:00
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T09:18:06.207Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666232,"cmd_timestamp_ms":1760163486232,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666232,"cmd_timestamp_ms":1760163486232,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 09:18:06.338+00:00
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T09:18:06.338Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666355,"cmd_timestamp_ms":1760163486355,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666355,"cmd_timestamp_ms":1760163486355,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:18:06 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:18:06 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:18:06 IQ138000 wb-rules[4612]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 09:18:06.498+00:00
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T09:18:06.498Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666512,"cmd_timestamp_ms":1760163486512,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666512,"cmd_timestamp_ms":1760163486512,"source":"schedule"}
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m: Started frontend on port 8282
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.93,"last_seen":1760153444666,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.19,"last_seen":1760152934814,"power_outage_count":48745,"temperature":24.56,"voltage":3025}'
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {0}[0]
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760153220634,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 06:18:06 IQ138000 npm[3801]: [2025-10-11 06:18:06] info:         z2m: Zigbee2MQTT started!
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 09:18:06.825+00:00
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T09:18:06.825Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666852,"cmd_timestamp_ms":1760163486852,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163666852,"cmd_timestamp_ms":1760163486852,"source":"schedule"}
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 06:18:06 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 06:18:06 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 06:18:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:18:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:18:06 IQ138000 knxd[5182]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:18:06 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:18:06 IQ138000 knxd[5182]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:18:07 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:18:07 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 09:18:07.059+00:00
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T09:18:07.059Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163667093,"cmd_timestamp_ms":1760163487093,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163667093,"cmd_timestamp_ms":1760163487093,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 06:18:07 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 09:18:07.272+00:00
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T09:18:07.272Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163667287,"cmd_timestamp_ms":1760163487287,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163667287,"cmd_timestamp_ms":1760163487287,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 09:18:07.487+00:00
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T09:18:07.487Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163667500,"cmd_timestamp_ms":1760163487500,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163667500,"cmd_timestamp_ms":1760163487500,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 09:18:07.706+00:00
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T09:18:07.706Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760163667717,"cmd_timestamp_ms":1760163487717,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760163667717,"cmd_timestamp_ms":1760163487717,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 09:18:07.862+00:00
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T09:18:07.862Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760163667871,"cmd_timestamp_ms":1760163487871,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760163667871,"cmd_timestamp_ms":1760163487871,"source":"schedule"}
Oct 11 06:18:07 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 09:18:08.060+00:00
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T09:18:08.060Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163668076,"cmd_timestamp_ms":1760163488076,"source":"schedule"}
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163668076,"cmd_timestamp_ms":1760163488076,"source":"schedule"}
Oct 11 06:18:08 IQ138000 wb-watchdog[5227]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 09:18:08.234+00:00
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T09:18:08.234Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163668244,"cmd_timestamp_ms":1760163488244,"source":"schedule"}
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163668244,"cmd_timestamp_ms":1760163488244,"source":"schedule"}
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 06:18:08 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 06:18:08 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 06:18:09 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 06:18:09 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 06:18:09 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 06:18:09 IQ138000 wb-rules[4612]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 06:18:09 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:09 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:18:09 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 06:18:09 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 06:18:09 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 06:18:10 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:11 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:12 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:18:13 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:14 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:15 IQ138000 ModemManager[469]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 06:18:15 IQ138000 ModemManager[469]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 06:18:15 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:16 IQ138000 ModemManager[469]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 06:18:16 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:18:16 IQ138000 python3[2000]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 06:18:16 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 06:18:17 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 06:18:17 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 06:18:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:18:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:18:17 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:18:17 IQ138000 knxd[5382]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 06:18:17 IQ138000 knxd[5382]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 06:18:17 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:18:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 06:18:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 06:18:17 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 06:18:17 IQ138000 ModemManager[469]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 06:18:17 IQ138000 ModemManager[469]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7518] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7552] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7580] device (ttyUSB1): modem state 'enabling'
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7624] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7657] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7698] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7720] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:17 IQ138000 NetworkManager[403]: <info>  [1760163497.7748] manager: NetworkManager state is now CONNECTING
Oct 11 06:18:17 IQ138000 ModemManager[469]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 06:18:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 06:18:17 IQ138000 ModemManager[469]: <info>  [modem0] power state updated: on
Oct 11 06:18:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:17 IQ138000 python3[2000]:            |                state: enabling
Oct 11 06:18:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:17 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 06:18:18 IQ138000 python3[2000]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 06:18:18 IQ138000 python3[2000]:  successfully requested primary SIM switch in modem
Oct 11 06:18:20 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Command: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760163680563,"cmd_timestamp_ms":1760163500563,"source":"regulation"}
Oct 11 06:18:20 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760163680563,"cmd_timestamp_ms":1760163500563,"source":"regulation"}
Oct 11 06:18:20 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 06:18:20 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 06:18:20 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 06:18:20 IQ138000 lsyncd[5414]: 06:18:20 Normal: --- Startup ---
Oct 11 06:18:20 IQ138000 lsyncd[5414]: 06:18:20 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 06:18:20 IQ138000 lsyncd[5414]: iq_network_manager/iq_network_manager.log
Oct 11 06:18:20 IQ138000 lsyncd[5414]: messages
Oct 11 06:18:20 IQ138000 lsyncd[5414]: journal
Oct 11 06:18:20 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:18:20 IQ138000 lsyncd[5419]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 06:18:20 IQ138000 lsyncd[5417]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 06:18:20 IQ138000 lsyncd[5417]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 06:18:20 IQ138000 lsyncd[5414]: 06:18:20 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 06:18:20 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 06:18:20 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 06:18:21 IQ138000 wb-rules[4612]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 06:18:22 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 06:18:22 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] simple connect started...
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (6/10): register
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 06:18:22 IQ138000 wb-rules[4612]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 06:18:22 IQ138000 NetworkManager[403]: <info>  [1760163502.5669] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:22 IQ138000 NetworkManager[403]: <info>  [1760163502.5683] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 06:18:22 IQ138000 NetworkManager[403]: <info>  [1760163502.5719] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 06:18:22 IQ138000 NetworkManager[403]: <info>  [1760163502.5739] ppp-manager: starting PPP connection
Oct 11 06:18:22 IQ138000 NetworkManager[403]: <info>  [1760163502.5870] ppp-manager: pppd started with pid 5442
Oct 11 06:18:22 IQ138000 pppd[5442]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:18:22 IQ138000 NetworkManager[5442]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: initializing
Oct 11 06:18:22 IQ138000 pppd[5442]: pppd 2.4.9 started by root, uid 0
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 06:18:22 IQ138000 pppd[5442]: Using interface ppp0
Oct 11 06:18:22 IQ138000 NetworkManager[5442]: Using interface ppp0
Oct 11 06:18:22 IQ138000 NetworkManager[5442]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 06:18:22 IQ138000 pppd[5442]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 06:18:22 IQ138000 NetworkManager[403]: <info>  [1760163502.6504] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 06:18:22 IQ138000 pppd[5442]: PAP authentication succeeded
Oct 11 06:18:22 IQ138000 NetworkManager[5442]: PAP authentication succeeded
Oct 11 06:18:22 IQ138000 pppd[5442]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 06:18:22 IQ138000 pppd[5442]: kernel does not support PPP filtering
Oct 11 06:18:22 IQ138000 NetworkManager[5442]: kernel does not support PPP filtering
Oct 11 06:18:22 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 06:18:22 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 06:18:22 IQ138000 ModemManager[469]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 06:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:23 IQ138000 pppd[5442]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:18:23 IQ138000 NetworkManager[5442]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:18:23 IQ138000 pppd[5442]: local  IP address 10.65.181.46
Oct 11 06:18:23 IQ138000 pppd[5442]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 06:18:23 IQ138000 NetworkManager[5442]: local  IP address 10.65.181.46
Oct 11 06:18:23 IQ138000 NetworkManager[5442]: remote IP address 10.64.64.64
Oct 11 06:18:23 IQ138000 NetworkManager[5442]: primary   DNS address 172.23.10.130
Oct 11 06:18:23 IQ138000 NetworkManager[5442]: secondary DNS address 172.23.10.131
Oct 11 06:18:23 IQ138000 pppd[5442]: remote IP address 10.64.64.64
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.1994] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:18:23 IQ138000 pppd[5442]: primary   DNS address 172.23.10.130
Oct 11 06:18:23 IQ138000 pppd[5442]: secondary DNS address 172.23.10.131
Oct 11 06:18:23 IQ138000 pppd[5442]: nm-ppp-plugin: ip-up event
Oct 11 06:18:23 IQ138000 pppd[5442]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.2097] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.2128] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.2157] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.2211] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 06:18:23 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:18:23 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.2686] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:23 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:18:23 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:18:23 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:18:23 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.3636] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.3649] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.3669] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.3694] device (ttyUSB1): Activation: successful, device activated.
Oct 11 06:18:23 IQ138000 NetworkManager[403]: <info>  [1760163503.3727] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 06:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:24 IQ138000 ntpd[1651]: Listen normally on 4 ppp0 10.65.181.46:123
Oct 11 06:18:24 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 06:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:25 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 06:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:27 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 06:18:27 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 06:18:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 06:18:27 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 06:18:27 IQ138000 wb-mqtt-knx[2068]: INFO: knxd connected successfully
Oct 11 06:18:27 IQ138000 ntpd[1651]: Soliciting pool server 85.142.100.8
Oct 11 06:18:28 IQ138000 python3[2000]: Выполнение: mmcli -i any
Oct 11 06:18:28 IQ138000 python3[2000]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 06:18:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:18:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:28 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:28 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:28 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:28 IQ138000 python3[2000]: Current state: home
Oct 11 06:18:28 IQ138000 python3[2000]: SIM registered in the network.
Oct 11 06:18:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:28 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:28 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:28 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:28 IQ138000 ntpd[1651]: Soliciting pool server 92.255.126.4
Oct 11 06:18:28 IQ138000 ntpd[1651]: Soliciting pool server 91.235.144.128
Oct 11 06:18:28 IQ138000 ntpd[1651]: Soliciting pool server 82.146.53.58
Oct 11 06:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:29 IQ138000 ntpd[1651]: Soliciting pool server 94.100.180.133
Oct 11 06:18:29 IQ138000 ntpd[1651]: Soliciting pool server 92.255.126.17
Oct 11 06:18:29 IQ138000 ntpd[1651]: Soliciting pool server 92.241.18.100
Oct 11 06:18:29 IQ138000 ntpd[1651]: Soliciting pool server 46.146.231.187
Oct 11 06:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:30 IQ138000 ntpd[1651]: Soliciting pool server 51.250.110.169
Oct 11 06:18:30 IQ138000 ntpd[1651]: Soliciting pool server 195.122.253.38
Oct 11 06:18:30 IQ138000 ntpd[1651]: Soliciting pool server 185.211.244.47
Oct 11 06:18:30 IQ138000 ntpd[1651]: Soliciting pool server 188.225.33.239
Oct 11 06:18:31 IQ138000 ntpd[1651]: Soliciting pool server 109.195.84.246
Oct 11 06:18:31 IQ138000 ntpd[1651]: Soliciting pool server 193.106.93.116
Oct 11 06:18:31 IQ138000 ntpd[1651]: Soliciting pool server 85.193.65.152
Oct 11 06:18:31 IQ138000 ntpd[1651]: Soliciting pool server 89.109.251.28
Oct 11 06:18:32 IQ138000 ntpd[1651]: Soliciting pool server 109.111.178.39
Oct 11 06:18:32 IQ138000 ntpd[1651]: Soliciting pool server 2a02:6bf:f000:1:4::22
Oct 11 06:18:32 IQ138000 ntpd[1651]: Soliciting pool server 90.188.9.144
Oct 11 06:18:32 IQ138000 ntpd[1651]: Soliciting pool server 162.159.200.123
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 06:18:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:33 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:33 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:33 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:33 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:18:33 IQ138000 python3[2000]: OLD SETTINGS: None
Oct 11 06:18:33 IQ138000 python3[2000]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 06:18:33 IQ138000 python3[2000]: New settings applied
Oct 11 06:18:33 IQ138000 do-upgrade.sh[2057]: 1760163503
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:18:34 IQ138000 python3[5623]: Connection 'LegacyWiFi' does not exist.
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:18:34 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' is temporarily empty. Skipping this update.
Oct 11 06:18:34 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 python3[5632]: {
Oct 11 06:18:34 IQ138000 python3[5632]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 06:18:34 IQ138000 python3[5632]:     "tiers": {
Oct 11 06:18:34 IQ138000 python3[5632]:         "high": [
Oct 11 06:18:34 IQ138000 python3[5632]:             "wb-eth0",
Oct 11 06:18:34 IQ138000 python3[5632]:             "ServiceAP"
Oct 11 06:18:34 IQ138000 python3[5632]:         ],
Oct 11 06:18:34 IQ138000 python3[5632]:         "low": [
Oct 11 06:18:34 IQ138000 python3[5632]:             "wb-gsm-sim1",
Oct 11 06:18:34 IQ138000 python3[5632]:             "wb-gsm-sim2"
Oct 11 06:18:34 IQ138000 python3[5632]:         ],
Oct 11 06:18:34 IQ138000 python3[5632]:         "medium": []
Oct 11 06:18:34 IQ138000 python3[5632]:     },
Oct 11 06:18:34 IQ138000 python3[5632]:     "debug": false
Oct 11 06:18:34 IQ138000 python3[5632]: }
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 python3[2000]: COMMAND "systemctl is-active wb-connection-manager" exited with 3
Oct 11 06:18:34 IQ138000 python3[2000]: [stdout]
Oct 11 06:18:34 IQ138000 python3[2000]: "inactive
Oct 11 06:18:34 IQ138000 python3[2000]: "
Oct 11 06:18:34 IQ138000 python3[2000]: Service wb-connection-manager is not active. No action taken.
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.e025e5ee does not match aorg 0000000000.00000000 from server@82.146.53.58 xmt 0xec94753c.625ba212
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.e0067df9 does not match aorg 0000000000.00000000 from server@51.250.110.169 xmt 0xec94753c.631d368c
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.e02ffa48 does not match aorg 0000000000.00000000 from server@85.142.100.8 xmt 0xec94753c.63228f4d
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.dffd5dca does not match aorg 0000000000.00000000 from server@188.225.33.239 xmt 0xec94753c.634b4830
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.e01578fc does not match aorg 0000000000.00000000 from server@92.255.126.17 xmt 0xec94753c.635d24de
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.e00e3db8 does not match aorg 0000000000.00000000 from server@46.146.231.187 xmt 0xec94753c.63e01148
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.dfed4414 does not match aorg 0000000000.00000000 from server@89.109.251.28 xmt 0xec94753c.675fe8cd
Oct 11 06:18:36 IQ138000 ntpd[1651]: receive: Unexpected origin timestamp 0xec94753c.e02029c0 does not match aorg 0000000000.00000000 from server@91.235.144.128 xmt 0xec94753c.71aa044d
Oct 11 06:18:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:38 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:38 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:38 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:38 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:38 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:38 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:38 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:38 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:38 IQ138000 do-upgrade.sh[2057]: 1760163518
Oct 11 06:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:43 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:43 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:43 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:43 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:43 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:43 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:43 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:43 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:18:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:18:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:48 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:48 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:48 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:48 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:48 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:48 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:48 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:48 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:18:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:53 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:53 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:53 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:53 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:54 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:54 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:54 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:54 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:18:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:18:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:18:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:18:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:18:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:18:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:18:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:18:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:18:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:18:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:18:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:18:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:18:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:18:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:18:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:18:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:18:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:18:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:18:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:18:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:18:59 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:18:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:18:59 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:18:59 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:18:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:18:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:18:59 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:18:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:18:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:18:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:18:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:18:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:18:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:18:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:18:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:19:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:04 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:04 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:04 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:04 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:08 IQ138000 wb-watchdog[6082]: [INFO] Interval #3 started. Waiting up to 60 seconds for error...
Oct 11 06:19:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:09 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:09 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:09 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:09 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:09 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:09 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:09 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:09 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:09 IQ138000 wb-rules[4612]: INFO: [engine] Stopping sync loop
Oct 11 06:19:09 IQ138000 wb-rules[4612]: INFO: [engine] Stop main loop
Oct 11 06:19:09 IQ138000 systemd[1]: Stopping MQTT Rule engine for Wiren Board...
Oct 11 06:19:09 IQ138000 systemd[1]: wb-rules.service: Succeeded.
Oct 11 06:19:09 IQ138000 systemd[1]: Stopped MQTT Rule engine for Wiren Board.
Oct 11 06:19:09 IQ138000 systemd[1]: wb-rules.service: Consumed 27.063s CPU time.
Oct 11 06:19:10 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 06:19:10 IQ138000 wb-rules[6102]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 06:19:10 IQ138000 wb-rules[6102]: INFO: driver is created
Oct 11 06:19:10 IQ138000 systemd[1]: Stopping Data collection and transformation service...
Oct 11 06:19:10 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 06:19:10 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 11 06:19:10 IQ138000 wb-rules[6102]: INFO: [wbgo_mqtt] rules-IQ138000-6102: MQTT connection established
Oct 11 06:19:10 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 11 06:19:10 IQ138000 wb-rules[6102]: INFO: driver loop is started
Oct 11 06:19:10 IQ138000 wb-rules[6102]: INFO: wait for driver to become ready
Oct 11 06:19:10 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 06:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:10 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 06:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:11 IQ138000 wb-rules[6102]: INFO: driver is ready
Oct 11 06:19:11 IQ138000 wb-rules[6102]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 06:19:11 IQ138000 wb-rules[6102]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-6102: MQTT connection established
Oct 11 06:19:11 IQ138000 wb-rules[6102]: INFO: [engine] Starting main loop
Oct 11 06:19:11 IQ138000 wb-rules[6102]: INFO: the engine is ready
Oct 11 06:19:11 IQ138000 wb-rules[6102]: INFO: [engine] Starting sync loop
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-rules[6102]: WARNING: [rule warning] DAC: no config file
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 06:19:13 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 06:19:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:19:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 06:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:14 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:14 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:14 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:14 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:14 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:14 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:14 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:14 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:14 IQ138000 wb-rules[6102]: INFO: all rule files are loaded
Oct 11 06:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 06:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 06:19:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 06:19:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 06:19:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 06:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:19:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 06:19:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 06:19:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:19 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:19 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:19 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:19 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:19:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:20 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:20 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:20 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:20 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:19:20 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 2.
Oct 11 06:19:20 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 06:19:20 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 06:19:20 IQ138000 lsyncd[6566]: 06:19:20 Normal: --- Startup ---
Oct 11 06:19:20 IQ138000 lsyncd[6566]: 06:19:20 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 06:19:20 IQ138000 lsyncd[6566]: journal
Oct 11 06:19:20 IQ138000 lsyncd[6566]: messages
Oct 11 06:19:20 IQ138000 lsyncd[6566]: iq_network_manager/iq_network_manager.log
Oct 11 06:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:19:21 IQ138000 lsyncd[6566]: 06:19:21 Normal: Startup of "/var/log/p7/usr/bin/iqnergy/" finished: 0
Oct 11 06:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-11 09:19:23.012+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-11T09:19:23.012Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743027,"cmd_timestamp_ms":1760163563027,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743027,"cmd_timestamp_ms":1760163563027,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 09:19:23.203+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T09:19:23.203Z","to":"2025-10-11T10:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760163743215,"cmd_timestamp_ms":1760163563215,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760163743215,"cmd_timestamp_ms":1760163563215,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-11 09:19:23.299+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-11T09:19:23.299Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743314,"cmd_timestamp_ms":1760163563314,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743314,"cmd_timestamp_ms":1760163563314,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-11 09:19:23.422+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-11T09:19:23.422Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743448,"cmd_timestamp_ms":1760163563448,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743448,"cmd_timestamp_ms":1760163563448,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-11 09:19:23.521+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-11T09:19:23.521Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743560,"cmd_timestamp_ms":1760163563560,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743560,"cmd_timestamp_ms":1760163563560,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-11 09:19:23.647+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-11T09:19:23.647Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743661,"cmd_timestamp_ms":1760163563661,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743661,"cmd_timestamp_ms":1760163563661,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 09:19:23.761+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T09:19:23.761Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743771,"cmd_timestamp_ms":1760163563771,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743771,"cmd_timestamp_ms":1760163563771,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 09:19:23.892+00:00
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T09:19:23.892Z","to":"2025-10-11T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":0}}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743906,"cmd_timestamp_ms":1760163563906,"source":"schedule"}
Oct 11 06:19:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760163743906,"cmd_timestamp_ms":1760163563906,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 09:19:24.130+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T09:19:24.130Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163744147,"cmd_timestamp_ms":1760163564147,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163744147,"cmd_timestamp_ms":1760163564147,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 09:19:24.246+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T09:19:24.246Z","to":"2025-10-11T09:20:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163744260,"cmd_timestamp_ms":1760163564260,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163744260,"cmd_timestamp_ms":1760163564260,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 09:19:24.375+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T09:19:24.375Z","to":"2025-10-11T10:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163744390,"cmd_timestamp_ms":1760163564390,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760163744390,"cmd_timestamp_ms":1760163564390,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-11 09:19:24.488+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-11T09:19:24.488Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760163744501,"cmd_timestamp_ms":1760163564501,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760163744501,"cmd_timestamp_ms":1760163564501,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-11 09:19:24.616+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-11T09:19:24.616Z","to":"2025-10-12T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760163744626,"cmd_timestamp_ms":1760163564626,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760163744626,"cmd_timestamp_ms":1760163564626,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-11 09:19:24.748+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-11T09:19:24.748Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163744758,"cmd_timestamp_ms":1760163564758,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163744758,"cmd_timestamp_ms":1760163564758,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-11 09:19:24.904+00:00
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-11T09:19:24.904Z","to":"2025-10-11T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163744915,"cmd_timestamp_ms":1760163564915,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760163744915,"cmd_timestamp_ms":1760163564915,"source":"schedule"}
Oct 11 06:19:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 06:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:25 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:25 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:25 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:25 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 06:19:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:25 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:25 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:25 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:25 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:25 IQ138000 wb-rules[6102]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 06:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 06:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:30 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:30 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:30 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:30 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:19:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:35 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:35 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:35 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:35 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:38 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 06:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:19:39 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 06:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:19:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:19:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 06:19:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:19:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:19:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:19:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:19:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:19:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:19:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:19:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:19:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:19:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:19:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:19:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:19:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:19:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:19:40 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:19:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:19:40 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:19:40 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:19:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:19:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 06:19:40 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:19:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 06:19:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 06:19:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 06:19:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:19:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:19:40 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:19:40 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:19:40 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:19:40 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc --set-primary-sim-slot=2
Oct 11 06:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:46 IQ138000 ModemManager[469]: <info>  [modem0] mobile equipment forced PS detach: all contexts have been deactivated
Oct 11 06:19:46 IQ138000 ModemManager[469]: <info>  [modem0/bearer0] explicitly disconnected
Oct 11 06:19:46 IQ138000 ModemManager[469]: <info>  [modem0] 3GPP registration state changed (home -> idle)
Oct 11 06:19:46 IQ138000 ModemManager[469]: <info>  [modem0] network request to deactivate context (cid 1)
Oct 11 06:19:46 IQ138000 ModemManager[469]: <info>  [modem0] network request to deactivate context (cid 3)
Oct 11 06:19:46 IQ138000 ModemManager[469]: <info>  [modem0/bearer0] explicitly disconnected
Oct 11 06:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:46 IQ138000 pppd[5442]: LCP terminated by peer
Oct 11 06:19:47 IQ138000 NetworkManager[5442]: LCP terminated by peer
Oct 11 06:19:47 IQ138000 NetworkManager[5442]: Connect time 1.4 minutes.
Oct 11 06:19:47 IQ138000 NetworkManager[5442]: Sent 360188 bytes, received 1048013 bytes.
Oct 11 06:19:46 IQ138000 pppd[5442]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 06:19:46 IQ138000 pppd[5442]: Connect time 1.4 minutes.
Oct 11 06:19:47 IQ138000 pppd[5442]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 06:19:46 IQ138000 pppd[5442]: Sent 360188 bytes, received 1048013 bytes.
Oct 11 06:19:47 IQ138000 NetworkManager[403]: <info>  [1760163587.0072] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:19:47 IQ138000 ModemManager[469]: <warn>  [modem0/bearer0] checking if connected failed: Couldn't check current list of active PDP contexts: Unknown error
Oct 11 06:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:48 IQ138000 ntpd[1651]: Deleting interface #4 *multiple*, 10.65.181.46#123, interface stats: received=179, sent=181, dropped=4, active_time=84 secs
Oct 11 06:19:48 IQ138000 ntpd[1651]: 90.188.9.144 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 109.111.178.39 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 162.159.200.123 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 89.109.251.28 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 85.193.65.152 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 109.195.84.246 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 193.106.93.116 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 195.122.253.38 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 188.225.33.239 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 51.250.110.169 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 185.211.244.47 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 46.146.231.187 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 92.255.126.17 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 92.241.18.100 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 94.100.180.133 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 91.235.144.128 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 82.146.53.58 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 92.255.126.4 local addr 10.65.181.46 -> <null>
Oct 11 06:19:48 IQ138000 ntpd[1651]: 85.142.100.8 local addr 10.65.181.46 -> <null>
Oct 11 06:19:50 IQ138000 pppd[5442]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 11 06:19:50 IQ138000 pppd[5442]: Connection terminated.
Oct 11 06:19:50 IQ138000 NetworkManager[5442]: Connection terminated.
Oct 11 06:19:50 IQ138000 avahi-daemon[364]: Withdrawing workstation service for ppp0.
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0133] device (ttyUSB1): state change: activated -> failed (reason 'ppp-disconnect', sys-iface-state: 'managed')
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0164] manager: NetworkManager state is now DISCONNECTED
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <warn>  [1760163590.0211] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim1'
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0310] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:19:50 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:19:50 IQ138000 ModemManager[469]: <info>  [modem0] state changed (connected -> disconnecting)
Oct 11 06:19:50 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0787] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0827] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0835] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0866] manager: NetworkManager state is now CONNECTING
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <warn>  [1760163590.0880] modem-broadband[ttyUSB1]: failed to connect 'wb-gsm-sim1': unable to determine the network id
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0885] device (ttyUSB1): state change: prepare -> failed (reason 'modem-init-failed', sys-iface-state: 'managed')
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0906] manager: NetworkManager state is now DISCONNECTED
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <warn>  [1760163590.0944] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim1'
Oct 11 06:19:50 IQ138000 NetworkManager[403]: <info>  [1760163590.0966] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:19:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 06:19:50 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:19:50 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:19:50 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 06:19:51 IQ138000 pppd[5442]: Terminating on signal 15
Oct 11 06:19:51 IQ138000 NetworkManager[5442]: Terminating on signal 15
Oct 11 06:19:51 IQ138000 NetworkManager[5442]: Modem hangup
Oct 11 06:19:51 IQ138000 pppd[5442]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 11 06:19:51 IQ138000 pppd[5442]: Modem hangup
Oct 11 06:19:51 IQ138000 pppd[5442]: nm-ppp-plugin: cleaning up
Oct 11 06:19:51 IQ138000 pppd[5442]: Exit.
Oct 11 06:19:51 IQ138000 python3[2000]: Команда "mmcli -m wbc --set-primary-sim-slot=2" выполнена. Результат:
Oct 11 06:19:51 IQ138000 python3[2000]:  successfully requested primary SIM switch in modem
Oct 11 06:19:52 IQ138000 ModemManager[469]: <info>  [modem0] state changed (disconnecting -> enabled)
Oct 11 06:19:52 IQ138000 ModemManager[469]: <info>  [modem0] state changed (enabled -> disabling)
Oct 11 06:19:52 IQ138000 ModemManager[469]: <info>  [modem0/bearer0] connection #1 finished: duration 90s
Oct 11 06:19:52 IQ138000 ModemManager[469]: <info>  [modem0] 3GPP registration state changed (idle -> unknown)
Oct 11 06:19:52 IQ138000 NetworkManager[403]: <info>  [1760163592.9511] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 11 06:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:55 IQ138000 ModemManager[469]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 06:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:56 IQ138000 ModemManager[469]: <warn>  [modem1] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 06:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:56 IQ138000 ModemManager[469]: <warn>  [modem1/sim1] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:19:57 IQ138000 ModemManager[469]: <warn>  [modem1/sim1] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:19:57 IQ138000 ModemManager[469]: <warn>  [modem1] couldn't load list of own numbers: Operation not supported
Oct 11 06:19:58 IQ138000 ModemManager[469]: <info>  [modem1] state changed (unknown -> disabled)
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0730] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/13)
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0760] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0786] device (ttyUSB1): modem state 'enabling'
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0809] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0829] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0870] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0877] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:19:58 IQ138000 NetworkManager[403]: <info>  [1760163598.0905] manager: NetworkManager state is now CONNECTING
Oct 11 06:19:58 IQ138000 ModemManager[469]: <info>  [modem1] state changed (disabled -> enabling)
Oct 11 06:19:58 IQ138000 ModemManager[469]: <info>  [modem1] power state updated: on
Oct 11 06:19:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/5
Oct 11 06:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:00 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:20:01 IQ138000 python3[2000]: Выполнение: mmcli -i any
Oct 11 06:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:01 IQ138000 python3[2000]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 06:20:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:01 IQ138000 python3[2000]:            |                state: enabling
Oct 11 06:20:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:01 IQ138000 python3[2000]: Current state:
Oct 11 06:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:02 IQ138000 ModemManager[469]: <info>  [modem1] state changed (enabling -> enabled)
Oct 11 06:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:02 IQ138000 ModemManager[469]: <info>  [modem1] 3GPP registration state changed (unknown -> registering)
Oct 11 06:20:02 IQ138000 ModemManager[469]: <info>  [modem1] 3GPP registration state changed (registering -> home)
Oct 11 06:20:02 IQ138000 ModemManager[469]: <info>  [modem1] state changed (enabled -> registered)
Oct 11 06:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] simple connect started...
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] simple connect state (6/10): register
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] simple connect state (7/10): wait to get packet service state attached
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] simple connect state (8/10): bearer
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] simple connect state (9/10): connect
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] state changed (registered -> connecting)
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] state changed (connecting -> connected)
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] simple connect state (10/10): all done
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.3559] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.3572] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.3580] ppp-manager: starting PPP connection
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.3699] ppp-manager: pppd started with pid 7182
Oct 11 06:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: initializing
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:20:03 IQ138000 pppd[7182]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:20:03 IQ138000 pppd[7182]: pppd 2.4.9 started by root, uid 0
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 06:20:03 IQ138000 pppd[7182]: Using interface ppp0
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: Using interface ppp0
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 06:20:03 IQ138000 pppd[7182]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.4324] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/14)
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 06:20:03 IQ138000 pppd[7182]: PAP authentication succeeded
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: PAP authentication succeeded
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: kernel does not support PPP filtering
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 06:20:03 IQ138000 pppd[7182]: kernel does not support PPP filtering
Oct 11 06:20:03 IQ138000 ModemManager[469]: <info>  [modem1] mobile equipment request to activate context (cid 2)
Oct 11 06:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:03 IQ138000 pppd[7182]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:20:03 IQ138000 pppd[7182]: local  IP address 10.44.154.106
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: local  IP address 10.44.154.106
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: remote IP address 10.64.64.64
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: primary   DNS address 176.59.62.126
Oct 11 06:20:03 IQ138000 NetworkManager[7182]: secondary DNS address 176.59.62.125
Oct 11 06:20:03 IQ138000 pppd[7182]: remote IP address 10.64.64.64
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.8833] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:20:03 IQ138000 pppd[7182]: primary   DNS address 176.59.62.126
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.8870] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 06:20:03 IQ138000 pppd[7182]: secondary DNS address 176.59.62.125
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: ip-up event
Oct 11 06:20:03 IQ138000 pppd[7182]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.8989] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.9023] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.9081] policy: set 'wb-gsm-sim2' (ppp0) as default for IPv4 routing and DNS
Oct 11 06:20:03 IQ138000 NetworkManager[403]: <info>  [1760163603.9584] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 06:20:03 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:20:03 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:20:04 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:20:04 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:20:04 IQ138000 NetworkManager[403]: <info>  [1760163604.0483] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 06:20:04 IQ138000 NetworkManager[403]: <info>  [1760163604.0496] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 06:20:04 IQ138000 NetworkManager[403]: <info>  [1760163604.0518] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 06:20:04 IQ138000 NetworkManager[403]: <info>  [1760163604.0539] device (ttyUSB1): Activation: successful, device activated.
Oct 11 06:20:04 IQ138000 NetworkManager[403]: <info>  [1760163604.0572] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 06:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:20:05 IQ138000 ntpd[1651]: Listen normally on 5 ppp0 10.44.154.106:123
Oct 11 06:20:05 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 06:20:05 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 06:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:20:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:20:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:08 IQ138000 wb-watchdog[7280]: [INFO] Interval #4 started. Waiting up to 60 seconds for error...
Oct 11 06:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:11 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:11 IQ138000 python3[2000]: Current state: home
Oct 11 06:20:11 IQ138000 python3[2000]: SIM registered in the network.
Oct 11 06:20:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:11 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-11 09:20:14.003+00:00
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-11T09:20:14.003Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760163794013,"cmd_timestamp_ms":1760163614013,"source":"schedule"}
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760163794013,"cmd_timestamp_ms":1760163614013,"source":"schedule"}
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-11 09:20:14.024+00:00
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-11T09:20:14.024Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760163794035,"cmd_timestamp_ms":1760163614035,"source":"schedule"}
Oct 11 06:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760163794035,"cmd_timestamp_ms":1760163614035,"source":"schedule"}
Oct 11 06:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:14 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:20:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:16 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 06:20:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 06:20:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:22 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:27 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:32 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:37 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:42 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:48 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:53 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:20:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:20:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:20:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:20:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:20:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:20:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:20:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:20:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:20:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:20:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:20:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:20:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:20:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:20:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:20:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:20:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:20:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:20:58 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:20:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:20:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:20:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:20:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:20:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:20:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:20:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:20:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:20:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:20:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:20:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:20:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:20:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:20:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:20:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:20:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:20:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:21:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:03 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:21:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:21:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:21:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:21:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:21:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:21:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:21:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:21:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:21:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:21:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:21:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:08 IQ138000 wb-watchdog[7965]: [INFO] Interval #5 started. Waiting up to 60 seconds for error...
Oct 11 06:21:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:21:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:08 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:21:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:21:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:21:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:21:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:21:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:21:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:21:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:21:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:21:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:21:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:21:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:13 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:21:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:21:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:21:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:21:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:21:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:21:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:21:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:21:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:21:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:21:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:21:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:21:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:21:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:21:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:21:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:21:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:21:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:21:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:21:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:21:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:21:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:21:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 11 06:21:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 06:21:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 06:21:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 06:21:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 11 06:21:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 11 06:21:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 11 06:21:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 11 06:21:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 06:21:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 06:21:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 06:21:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 06:21:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 06:21:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 06:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 06:21:29 IQ138000 ModemManager[469]: <info>  [modem1] mobile equipment forced PS detach: all contexts have been deactivated
Oct 11 06:21:29 IQ138000 ModemManager[469]: <info>  [modem1/bearer1] explicitly disconnected
Oct 11 06:21:29 IQ138000 ModemManager[469]: <info>  [modem1] 3GPP registration state changed (home -> idle)
Oct 11 06:21:29 IQ138000 ModemManager[469]: <info>  [modem1] network request to deactivate context (cid 1)
Oct 11 06:21:29 IQ138000 ModemManager[469]: <info>  [modem1] network request to deactivate context (cid 2)
Oct 11 06:21:29 IQ138000 ModemManager[469]: <info>  [modem1/bearer1] explicitly disconnected
Oct 11 06:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:30 IQ138000 pppd[7182]: LCP terminated by peer
Oct 11 06:21:30 IQ138000 NetworkManager[7182]: LCP terminated by peer
Oct 11 06:21:30 IQ138000 NetworkManager[7182]: Connect time 1.5 minutes.
Oct 11 06:21:30 IQ138000 NetworkManager[7182]: Sent 7564 bytes, received 8124 bytes.
Oct 11 06:21:30 IQ138000 pppd[7182]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 06:21:30 IQ138000 pppd[7182]: Connect time 1.5 minutes.
Oct 11 06:21:30 IQ138000 pppd[7182]: Sent 7564 bytes, received 8124 bytes.
Oct 11 06:21:30 IQ138000 pppd[7182]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 06:21:30 IQ138000 NetworkManager[403]: <info>  [1760163690.7956] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:21:32 IQ138000 ntpd[1651]: Deleting interface #5 *multiple*, 10.44.154.106#123, interface stats: received=60, sent=60, dropped=0, active_time=87 secs
Oct 11 06:21:32 IQ138000 ntpd[1651]: 85.142.100.8 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 92.255.126.4 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 82.146.53.58 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 91.235.144.128 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 94.100.180.133 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 92.241.18.100 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 92.255.126.17 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 46.146.231.187 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 185.211.244.47 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 51.250.110.169 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 188.225.33.239 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 195.122.253.38 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 193.106.93.116 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 109.195.84.246 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 85.193.65.152 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 89.109.251.28 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 162.159.200.123 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 109.111.178.39 local addr 10.44.154.106 -> <null>
Oct 11 06:21:32 IQ138000 ntpd[1651]: 90.188.9.144 local addr 10.44.154.106 -> <null>
Oct 11 06:21:33 IQ138000 pppd[7182]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 11 06:21:33 IQ138000 pppd[7182]: Connection terminated.
Oct 11 06:21:33 IQ138000 NetworkManager[7182]: Connection terminated.
Oct 11 06:21:33 IQ138000 avahi-daemon[364]: Withdrawing workstation service for ppp0.
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.8129] device (ttyUSB1): state change: activated -> failed (reason 'ppp-disconnect', sys-iface-state: 'managed')
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.8171] manager: NetworkManager state is now DISCONNECTED
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <warn>  [1760163693.8314] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim2'
Oct 11 06:21:33 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.8562] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:33 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:21:33 IQ138000 ModemManager[469]: <info>  [modem1] state changed (connected -> disconnecting)
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9449] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9511] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9521] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9542] manager: NetworkManager state is now CONNECTING
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <warn>  [1760163693.9556] modem-broadband[ttyUSB1]: failed to connect 'wb-gsm-sim2': unable to determine the network id
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9563] device (ttyUSB1): state change: prepare -> failed (reason 'modem-init-failed', sys-iface-state: 'managed')
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9590] manager: NetworkManager state is now DISCONNECTED
Oct 11 06:21:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/5
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <warn>  [1760163693.9615] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim2'
Oct 11 06:21:33 IQ138000 NetworkManager[403]: <info>  [1760163693.9636] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:34 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:21:34 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:21:34 IQ138000 python3[2000]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 06:21:34 IQ138000 python3[2000]:  successfully requested primary SIM switch in modem
Oct 11 06:21:34 IQ138000 pppd[7182]: Terminating on signal 15
Oct 11 06:21:34 IQ138000 pppd[7182]: Modem hangup
Oct 11 06:21:34 IQ138000 pppd[7182]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 11 06:21:34 IQ138000 NetworkManager[7182]: Terminating on signal 15
Oct 11 06:21:34 IQ138000 NetworkManager[7182]: Modem hangup
Oct 11 06:21:34 IQ138000 pppd[7182]: Exit.
Oct 11 06:21:34 IQ138000 pppd[7182]: nm-ppp-plugin: cleaning up
Oct 11 06:21:35 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 06:21:36 IQ138000 ModemManager[469]: <info>  [modem1] state changed (disconnecting -> enabled)
Oct 11 06:21:36 IQ138000 ModemManager[469]: <info>  [modem1] state changed (enabled -> disabling)
Oct 11 06:21:36 IQ138000 ModemManager[469]: <info>  [modem1/bearer1] connection #1 finished: duration 92s
Oct 11 06:21:39 IQ138000 ModemManager[469]: <info>  [modem1] 3GPP registration state changed (idle -> unknown)
Oct 11 06:21:39 IQ138000 NetworkManager[403]: <info>  [1760163699.1176] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 11 06:21:39 IQ138000 python3[2000]: Выполнение: service wb-connection-manager start
Oct 11 06:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:41 IQ138000 ModemManager[469]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 06:21:41 IQ138000 ModemManager[469]: <warn>  [modem2] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 06:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:41 IQ138000 ModemManager[469]: <warn>  [modem2/sim2] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:21:41 IQ138000 ModemManager[469]: <warn>  [modem2/sim2] couldn't load GID1: SIM failure
Oct 11 06:21:42 IQ138000 ModemManager[469]: <warn>  [modem2/sim2] couldn't load GID2: SIM failure
Oct 11 06:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:42 IQ138000 ModemManager[469]: <warn>  [modem2/sim2] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 06:21:42 IQ138000 ModemManager[469]: <warn>  [modem2/sim2] couldn't load GID1: SIM failure
Oct 11 06:21:42 IQ138000 ModemManager[469]: <warn>  [modem2/sim2] couldn't load GID2: SIM failure
Oct 11 06:21:42 IQ138000 ModemManager[469]: <info>  [modem2] state changed (unknown -> disabled)
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7485] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/15)
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7516] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7561] device (ttyUSB1): modem state 'enabling'
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7580] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7601] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7632] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7638] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:42 IQ138000 NetworkManager[403]: <info>  [1760163702.7678] manager: NetworkManager state is now CONNECTING
Oct 11 06:21:42 IQ138000 ModemManager[469]: <info>  [modem2] state changed (disabled -> enabling)
Oct 11 06:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:21:42 IQ138000 ModemManager[469]: <info>  [modem2] power state updated: on
Oct 11 06:21:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/7
Oct 11 06:21:44 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 06:21:44 IQ138000 python3[2000]: Команда "service wb-connection-manager start" выполнена. Результат:
Oct 11 06:21:44 IQ138000 python3[2000]:  
Oct 11 06:21:44 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:21:45 IQ138000 wb-connection-manager[8516]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 06:21:45 IQ138000 wb-connection-manager[8516]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 06:21:45 IQ138000 NetworkManager[403]: <info>  [1760163705.8603] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8516 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:21:45 IQ138000 wb-connection-manager[8516]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1465] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1470] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8516 uid=0 result="success"
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1477] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1592] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1615] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1617] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1731] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1759] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1776] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1781] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1783] Config: added 'scan_ssid' value '1'
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1784] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1785] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.1786] Config: added 'psk' value '<hidden>'
Oct 11 06:21:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/8
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.2486] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:21:46 IQ138000 NetworkManager[403]: <info>  [1760163706.2488] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:21:46 IQ138000 ModemManager[469]: <info>  [modem2] state changed (enabling -> enabled)
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] 3GPP registration state changed (unknown -> registering)
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] 3GPP registration state changed (registering -> home)
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] state changed (enabled -> registered)
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] simple connect started...
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] simple connect state (6/10): register
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] simple connect state (7/10): wait to get packet service state attached
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] simple connect state (8/10): bearer
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] simple connect state (9/10): connect
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] state changed (registered -> connecting)
Oct 11 06:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:21:47 IQ138000 ModemManager[469]: <info>  [modem2] state changed (connecting -> connected)
Oct 11 06:21:48 IQ138000 ModemManager[469]: <info>  [modem2] simple connect state (10/10): all done
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.0118] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.0132] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.0140] ppp-manager: starting PPP connection
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.0257] ppp-manager: pppd started with pid 8539
Oct 11 06:21:48 IQ138000 pppd[8539]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: initializing
Oct 11 06:21:48 IQ138000 pppd[8539]: pppd 2.4.9 started by root, uid 0
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 06:21:48 IQ138000 pppd[8539]: Using interface ppp0
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: Using interface ppp0
Oct 11 06:21:48 IQ138000 pppd[8539]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.0926] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/16)
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 06:21:48 IQ138000 pppd[8539]: PAP authentication succeeded
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: PAP authentication succeeded
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: kernel does not support PPP filtering
Oct 11 06:21:48 IQ138000 pppd[8539]: kernel does not support PPP filtering
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 06:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:21:48 IQ138000 ModemManager[469]: <info>  [modem2] mobile equipment request to activate context (cid 3)
Oct 11 06:21:48 IQ138000 pppd[8539]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 06:21:48 IQ138000 pppd[8539]: local  IP address 10.37.94.94
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: local  IP address 10.37.94.94
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: remote IP address 10.64.64.64
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: primary   DNS address 172.23.10.130
Oct 11 06:21:48 IQ138000 NetworkManager[8539]: secondary DNS address 172.23.10.131
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 06:21:48 IQ138000 pppd[8539]: remote IP address 10.64.64.64
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.7576] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 06:21:48 IQ138000 pppd[8539]: primary   DNS address 172.23.10.130
Oct 11 06:21:48 IQ138000 pppd[8539]: secondary DNS address 172.23.10.131
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: ip-up event
Oct 11 06:21:48 IQ138000 pppd[8539]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.7666] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.7692] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.7714] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.7767] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.8250] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:48 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 06:21:48 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 06:21:48 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 06:21:48 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.9146] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.9169] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.9227] device (ttyUSB1): Activation: successful, device activated.
Oct 11 06:21:48 IQ138000 NetworkManager[403]: <info>  [1760163708.9306] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 06:21:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:21:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:49 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:49 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:21:49 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:21:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:21:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:21:49 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:21:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:21:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:21:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:21:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:21:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:50 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:21:50 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:21:50 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:21:50 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:21:50 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 06:21:51 IQ138000 ntpd[1651]: Listen normally on 6 ppp0 10.37.94.94:123
Oct 11 06:21:51 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 06:21:51 IQ138000 python3[2000]: Command output: {
Oct 11 06:21:51 IQ138000 python3[2000]:     "wb-gsm-sim1": {
Oct 11 06:21:51 IQ138000 python3[2000]:         "250997340491874": {
Oct 11 06:21:51 IQ138000 python3[2000]:             "avg_signal_rating": 96.0,
Oct 11 06:21:51 IQ138000 python3[2000]:             "records": 1208,
Oct 11 06:21:51 IQ138000 python3[2000]:             "last_timestamp": {
Oct 11 06:21:51 IQ138000 python3[2000]:                 "iso": "2025-10-11T06:19:50",
Oct 11 06:21:51 IQ138000 python3[2000]:                 "timestamp": 1760163590
Oct 11 06:21:51 IQ138000 python3[2000]:             }
Oct 11 06:21:51 IQ138000 python3[2000]:         }
Oct 11 06:21:51 IQ138000 python3[2000]:     },
Oct 11 06:21:51 IQ138000 python3[2000]:     "wb-gsm-sim2": {
Oct 11 06:21:51 IQ138000 python3[2000]:         "250207496118656": {
Oct 11 06:21:51 IQ138000 python3[2000]:             "avg_signal_rating": 89.07551240560949,
Oct 11 06:21:51 IQ138000 python3[2000]:             "records": 927,
Oct 11 06:21:51 IQ138000 python3[2000]:             "last_timestamp": {
Oct 11 06:21:51 IQ138000 python3[2000]:                 "iso": "2025-10-11T06:21:33",
Oct 11 06:21:51 IQ138000 python3[2000]:                 "timestamp": 1760163693
Oct 11 06:21:51 IQ138000 python3[2000]:             }
Oct 11 06:21:51 IQ138000 python3[2000]:         }
Oct 11 06:21:51 IQ138000 python3[2000]:     }
Oct 11 06:21:51 IQ138000 python3[2000]: }
Oct 11 06:21:51 IQ138000 python3[2000]: Data successfully saved to /tmp/network_status_cache.json
Oct 11 06:21:51 IQ138000 python3[2000]: Slots with signal ratings: [{'slot': 'wb-gsm-sim1', 'imsi': '250997340491874', 'avg_signal_rating': 96.0}, {'slot': 'wb-gsm-sim2', 'imsi': '250207496118656', 'avg_signal_rating': 89.07551240560949}]
Oct 11 06:21:51 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:21:51 IQ138000 python3[8635]: {
Oct 11 06:21:51 IQ138000 python3[8635]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 06:21:51 IQ138000 python3[8635]:     "tiers": {
Oct 11 06:21:51 IQ138000 python3[8635]:         "high": [
Oct 11 06:21:51 IQ138000 python3[8635]:             "wb-eth0",
Oct 11 06:21:51 IQ138000 python3[8635]:             "ServiceAP"
Oct 11 06:21:51 IQ138000 python3[8635]:         ],
Oct 11 06:21:51 IQ138000 python3[8635]:         "low": [
Oct 11 06:21:51 IQ138000 python3[8635]:             "wb-gsm-sim2",
Oct 11 06:21:51 IQ138000 python3[8635]:             "wb-gsm-sim1"
Oct 11 06:21:51 IQ138000 python3[8635]:         ],
Oct 11 06:21:51 IQ138000 python3[8635]:         "medium": []
Oct 11 06:21:51 IQ138000 python3[8635]:     },
Oct 11 06:21:51 IQ138000 python3[8635]:     "debug": false
Oct 11 06:21:51 IQ138000 python3[8635]: }
Oct 11 06:21:51 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:21:51 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:21:51 IQ138000 python3[8638]: {
Oct 11 06:21:51 IQ138000 python3[8638]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 06:21:51 IQ138000 python3[8638]:     "tiers": {
Oct 11 06:21:51 IQ138000 python3[8638]:         "high": [
Oct 11 06:21:51 IQ138000 python3[8638]:             "wb-eth0",
Oct 11 06:21:51 IQ138000 python3[8638]:             "ServiceAP"
Oct 11 06:21:51 IQ138000 python3[8638]:         ],
Oct 11 06:21:51 IQ138000 python3[8638]:         "low": [
Oct 11 06:21:51 IQ138000 python3[8638]:             "wb-gsm-sim1",
Oct 11 06:21:51 IQ138000 python3[8638]:             "wb-gsm-sim2"
Oct 11 06:21:51 IQ138000 python3[8638]:         ],
Oct 11 06:21:51 IQ138000 python3[8638]:         "medium": []
Oct 11 06:21:51 IQ138000 python3[8638]:     },
Oct 11 06:21:51 IQ138000 python3[8638]:     "debug": false
Oct 11 06:21:51 IQ138000 python3[8638]: }
Oct 11 06:21:51 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:21:52 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:21:52 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' is temporarily empty. Skipping this update.
Oct 11 06:21:52 IQ138000 python3[8641]: {
Oct 11 06:21:52 IQ138000 python3[8641]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 11 06:21:52 IQ138000 python3[8641]:     "tiers": {
Oct 11 06:21:52 IQ138000 python3[8641]:         "high": [
Oct 11 06:21:52 IQ138000 python3[8641]:             "wb-eth0",
Oct 11 06:21:52 IQ138000 python3[8641]:             "ServiceAP"
Oct 11 06:21:52 IQ138000 python3[8641]:         ],
Oct 11 06:21:52 IQ138000 python3[8641]:         "low": [
Oct 11 06:21:52 IQ138000 python3[8641]:             "wb-gsm-sim1",
Oct 11 06:21:52 IQ138000 python3[8641]:             "wb-gsm-sim2"
Oct 11 06:21:52 IQ138000 python3[8641]:         ],
Oct 11 06:21:52 IQ138000 python3[8641]:         "medium": [
Oct 11 06:21:52 IQ138000 python3[8641]:             "LegacyWiFi"
Oct 11 06:21:52 IQ138000 python3[8641]:         ]
Oct 11 06:21:52 IQ138000 python3[8641]:     },
Oct 11 06:21:52 IQ138000 python3[8641]:     "debug": false
Oct 11 06:21:52 IQ138000 python3[8641]: }
Oct 11 06:21:52 IQ138000 python3[2000]: File '/etc/wb-connection-manager.conf' was modified.
Oct 11 06:21:52 IQ138000 python3[2000]: Выполнение: service wb-connection-manager restart
Oct 11 06:21:52 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 06:21:52 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 06:21:52 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 06:21:52 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 06:21:52 IQ138000 python3[2000]: Команда "service wb-connection-manager restart" выполнена. Результат:
Oct 11 06:21:52 IQ138000 python3[2000]:  
Oct 11 06:21:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:21:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:21:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:21:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:21:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:21:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:21:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:21:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:21:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:21:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:21:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:21:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:21:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:21:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:21:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:21:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:21:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:21:52 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:21:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:21:52 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:21:52 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:21:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:21:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:21:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:21:52 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:21:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:21:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:21:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:21:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:21:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:21:52 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:21:52 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:21:52 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:21:52 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-connection-manager[8646]: Connection LegacyWiFi not found, skipping
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-connection-manager[8646]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-connection-manager[8646]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:21:53 IQ138000 NetworkManager[403]: <info>  [1760163713.5446] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:21:53 IQ138000 wb-connection-manager[8646]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:21:53 IQ138000 NetworkManager[403]: <info>  [1760163713.9632] device (wlan1): state change: config -> deactivating (reason 'user-requested', sys-iface-state: 'managed')
Oct 11 06:21:53 IQ138000 NetworkManager[403]: <info>  [1760163713.9674] audit: op="connection-deactivate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:21:53 IQ138000 NetworkManager[403]: <info>  [1760163713.9810] device (wlan1): state change: deactivating -> disconnected (reason 'user-requested', sys-iface-state: 'managed')
Oct 11 06:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0204] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0224] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:21:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/8
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0582] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0592] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0602] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0681] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0709] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0711] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0961] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.0987] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.1025] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.1033] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.1035] Config: added 'scan_ssid' value '1'
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.1040] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.1042] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:21:54 IQ138000 NetworkManager[403]: <info>  [1760163714.1043] Config: added 'psk' value '<hidden>'
Oct 11 06:21:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 06:21:56 IQ138000 python3[2000]: OLD SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 06:21:56 IQ138000 python3[2000]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 06:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:21:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 06:21:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 06:21:58 IQ138000 NetworkManager[403]: <info>  [1760163718.2125] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:21:58 IQ138000 NetworkManager[403]: <info>  [1760163718.2138] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:04 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 06:22:04 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.365s CPU time.
Oct 11 06:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:22:08 IQ138000 wb-watchdog[8836]: [INFO] Interval #6 started. Waiting up to 60 seconds for error...
Oct 11 06:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:19 IQ138000 NetworkManager[403]: <warn>  [1760163739.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:22:19 IQ138000 NetworkManager[403]: <info>  [1760163739.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:22:19 IQ138000 NetworkManager[403]: <warn>  [1760163739.0272] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:22:19 IQ138000 NetworkManager[403]: <info>  [1760163739.0291] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:22:19 IQ138000 NetworkManager[403]: <info>  [1760163739.0305] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:22:19 IQ138000 NetworkManager[403]: <info>  [1760163739.0354] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:22:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 11 06:22:19 IQ138000 wb-connection-manager[8646]: Error during connection "ServiceAP" checking: org.freedesktop.DBus.Error.UnknownMethod: No such interface “org.freedesktop.DBus.Properties” on object at path /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 11 06:22:19 IQ138000 wb-connection-manager[8646]: Armed sticky timeout until 2025-10-11T06:37:19.573703 for device ttyUSB1
Oct 11 06:22:19 IQ138000 wb-connection-manager[8646]: Current connection changed to wb-gsm-sim1
Oct 11 06:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:22:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:22:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:22:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:22:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:22:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:22:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:22:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:22:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:22:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:22:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:22:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:22:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:22:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:22:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:22:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:22:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:22:22 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:22:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:22:22 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:22:22 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:22:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:22:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:22:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:22:22 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:22:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:22:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:22:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:22:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:22:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:22:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:22:22 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:22:22 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:22:22 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:22:22 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:22:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:22:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:22:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:22:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:22:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:22:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:22:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:22:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:22:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:22:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:22:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:22:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:22:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:22:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:22:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:22:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:22:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:22:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:22:52 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:22:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:22:52 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:22:52 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:22:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:22:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:22:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:22:52 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:22:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:22:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:22:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:22:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:22:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:22:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:22:52 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:22:52 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:22:52 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:22:52 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:58 IQ138000 NetworkManager[403]: <info>  [1760163778.2045] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:08 IQ138000 wb-watchdog[9439]: [INFO] Interval #7 started. Waiting up to 60 seconds for error...
Oct 11 06:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:23:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:23:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4496] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4549] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4572] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4666] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4715] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4717] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4826] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4845] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4862] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4865] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4866] Config: added 'scan_ssid' value '1'
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4867] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4868] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.4869] Config: added 'psk' value '<hidden>'
Oct 11 06:23:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/10
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.5630] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:23:20 IQ138000 NetworkManager[403]: <info>  [1760163800.5632] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:23:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:23:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:23:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:23:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:23:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:23:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:23:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:23:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:23:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:23:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:23:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:23:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:23:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:23:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:23:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:23:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:23:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:23:23 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:23:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:23:23 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:23:23 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:23:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:23:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:23:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:23:23 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:23:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:23:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:23:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:23:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:23:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:23:23 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:23:23 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:23:23 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:23:23 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L2, row count 7183, limit 7042
Oct 11 06:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:46 IQ138000 NetworkManager[403]: <warn>  [1760163826.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:23:46 IQ138000 NetworkManager[403]: <info>  [1760163826.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:23:46 IQ138000 NetworkManager[403]: <warn>  [1760163826.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:23:46 IQ138000 NetworkManager[403]: <info>  [1760163826.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:23:46 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:23:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/10
Oct 11 06:23:46 IQ138000 NetworkManager[403]: <info>  [1760163826.0763] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:23:46 IQ138000 NetworkManager[403]: <info>  [1760163826.0766] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:46 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:23:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:23:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:23:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:23:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:23:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:23:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:23:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:23:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:23:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:23:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:23:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:23:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:23:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:23:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:23:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:23:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:23:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:23:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:23:53 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:23:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:23:53 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:23:53 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:23:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:23:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:23:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:23:53 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:23:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:23:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:23:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:23:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:23:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:23:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:23:53 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:23:53 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:23:53 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:23:53 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:24:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:24:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:24:03 IQ138000 NetworkManager[403]: <info>  [1760163843.1832] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:24:08 IQ138000 wb-watchdog[10161]: [INFO] Interval #8 started. Waiting up to 60 seconds for error...
Oct 11 06:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:24:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:24:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:24:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:24:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:24:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:24:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:24:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:24:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:24:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:24:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:24:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:24:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:24:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:24:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:24:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:24:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:24:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:24:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:24:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:24:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:24:23 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:24:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:24:23 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:24:23 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:24:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:24:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:24:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:24:23 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:24:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:24:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:24:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:24:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:24:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:24:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:24:23 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:24:23 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:24:23 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:24:23 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:24:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:24:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.4805] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.4840] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.4855] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.4907] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.4930] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.4933] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5040] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5059] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5083] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5086] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5088] Config: added 'scan_ssid' value '1'
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5089] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5090] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:24:47 IQ138000 NetworkManager[403]: <info>  [1760163887.5101] Config: added 'psk' value '<hidden>'
Oct 11 06:24:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/11
Oct 11 06:24:50 IQ138000 NetworkManager[403]: <info>  [1760163890.5943] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:24:50 IQ138000 NetworkManager[403]: <info>  [1760163890.5982] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:24:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:24:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:24:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:24:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:24:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:24:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:24:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:24:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:24:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:24:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:24:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:24:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:24:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:24:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:24:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:24:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:24:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:24:53 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:24:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:24:53 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:24:53 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:24:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:24:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:24:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:24:53 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:24:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:24:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:24:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:24:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:24:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:24:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:24:53 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:24:53 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:24:53 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:24:53 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:25:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:25:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:25:01 IQ138000 CRON[10687]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 06:25:01 IQ138000 CRON[10688]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 06:25:01 IQ138000 CRON[10696]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 06:25:01 IQ138000 CRON[10697]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Oct 11 06:25:01 IQ138000 CRON[10688]: pam_unix(cron:session): session closed for user root
Oct 11 06:25:01 IQ138000 CRON[10687]: pam_unix(cron:session): session closed for user root
Oct 11 06:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:08 IQ138000 wb-watchdog[10793]: [INFO] Interval #9 started. Waiting up to 60 seconds for error...
Oct 11 06:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:13 IQ138000 NetworkManager[403]: <warn>  [1760163913.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:25:13 IQ138000 NetworkManager[403]: <info>  [1760163913.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:25:13 IQ138000 NetworkManager[403]: <warn>  [1760163913.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:25:13 IQ138000 NetworkManager[403]: <info>  [1760163913.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:25:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/11
Oct 11 06:25:13 IQ138000 NetworkManager[403]: <info>  [1760163913.0654] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:25:13 IQ138000 NetworkManager[403]: <info>  [1760163913.0656] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:25:19 IQ138000 NetworkManager[403]: <info>  [1760163919.2453] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:25:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:25:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:25:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:25:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:25:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:25:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:25:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:25:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:25:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:25:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:25:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:25:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:25:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:25:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:25:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:25:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:25:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:25:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:25:23 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:25:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:25:23 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:25:23 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:25:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:25:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:25:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:25:23 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:25:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:25:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:25:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:25:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:25:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:25:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:25:23 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:25:23 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:25:23 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:25:23 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:25:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:25:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:25:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:25:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:25:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:25:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:25:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:25:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:25:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:25:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:25:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:25:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:25:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:25:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:25:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:25:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:25:54 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:25:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:25:54 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:25:54 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:25:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:25:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:25:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:25:54 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:25:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:25:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:25:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:25:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:25:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:25:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:25:54 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:25:54 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:25:54 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:25:54 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:26:08 IQ138000 wb-watchdog[11491]: [INFO] Interval #10 started. Waiting up to 60 seconds for error...
Oct 11 06:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 06:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4631] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4636] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4651] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4759] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4803] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4813] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4954] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.4984] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5001] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5004] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5005] Config: added 'scan_ssid' value '1'
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5005] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5007] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5007] Config: added 'psk' value '<hidden>'
Oct 11 06:26:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/12
Oct 11 06:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5979] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:26:14 IQ138000 NetworkManager[403]: <info>  [1760163974.5982] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:26:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:26:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:26:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:26:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:26:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:26:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:26:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:26:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:26:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:26:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:26:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:26:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:26:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:26:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:26:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:26:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:26:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:26:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:26:24 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:26:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:26:24 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:26:24 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:26:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:26:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:26:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:26:24 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:26:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:26:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:26:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:26:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:26:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:26:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:26:24 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:26:24 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:26:24 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:26:24 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:40 IQ138000 NetworkManager[403]: <warn>  [1760164000.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:26:40 IQ138000 NetworkManager[403]: <info>  [1760164000.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:26:40 IQ138000 NetworkManager[403]: <warn>  [1760164000.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:26:40 IQ138000 NetworkManager[403]: <info>  [1760164000.0293] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:26:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:26:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/12
Oct 11 06:26:40 IQ138000 NetworkManager[403]: <info>  [1760164000.0705] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:26:40 IQ138000 NetworkManager[403]: <info>  [1760164000.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:26:46 IQ138000 NetworkManager[403]: <info>  [1760164006.2437] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:26:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:26:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:26:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:26:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:26:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:26:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:26:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:26:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:26:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:26:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:26:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:26:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:26:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:26:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:26:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:26:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:26:54 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:26:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:26:54 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:26:54 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:26:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:26:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:26:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:26:54 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:26:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:26:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:26:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:26:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:26:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:26:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:26:54 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:26:54 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:26:54 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:26:54 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:26:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:26:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:08 IQ138000 wb-watchdog[12101]: [INFO] Interval #11 started. Waiting up to 60 seconds for error...
Oct 11 06:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:27:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:27:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:27:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:27:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:27:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:27:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:27:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:27:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:27:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:27:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:27:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:27:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:27:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:27:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:27:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:27:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:27:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:27:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:27:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:27:24 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:27:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:27:24 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:27:24 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:27:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:27:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:27:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:27:24 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:27:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:27:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:27:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:27:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:27:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:27:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:27:24 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:27:24 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:27:24 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:27:24 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:27:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:27:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6030] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6043] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6049] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6174] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6192] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6194] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6291] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6321] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6338] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6341] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6342] Config: added 'scan_ssid' value '1'
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6343] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6344] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:27:41 IQ138000 NetworkManager[403]: <info>  [1760164061.6345] Config: added 'psk' value '<hidden>'
Oct 11 06:27:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/13
Oct 11 06:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:44 IQ138000 NetworkManager[403]: <info>  [1760164064.7035] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:27:44 IQ138000 NetworkManager[403]: <info>  [1760164064.7050] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:27:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:27:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:27:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:27:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:27:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:27:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:27:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:27:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:27:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:27:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:27:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:27:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:27:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:27:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:27:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:27:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:27:54 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:27:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:27:54 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:27:54 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:27:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:27:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:27:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:27:54 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:27:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:27:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:27:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:27:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:27:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:27:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:27:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:27:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:27:55 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:27:55 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:27:55 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:27:55 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:27:58 IQ138000 npm[3801]: [2025-10-11 06:27:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760164078593,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 06:27:58 IQ138000 npm[3801]: [2025-10-11 06:27:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x00158d0007e48747","ieee_address":"0x00158d0007e48747"},"type":"device_announce"}'
Oct 11 06:27:59 IQ138000 npm[3801]: [2025-10-11 06:27:59] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50,"last_seen":1760164079047,"power_outage_count":25795,"pressure":993.6,"temperature":21.18,"voltage":3005}'
Oct 11 06:27:59 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Command: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760164259097,"cmd_timestamp_ms":1760164079097,"source":"regulation"}
Oct 11 06:27:59 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760164259097,"cmd_timestamp_ms":1760164079097,"source":"regulation"}
Oct 11 06:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:28:00 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 06:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:07 IQ138000 NetworkManager[403]: <warn>  [1760164087.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:28:07 IQ138000 NetworkManager[403]: <info>  [1760164087.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:28:07 IQ138000 NetworkManager[403]: <warn>  [1760164087.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:28:07 IQ138000 NetworkManager[403]: <info>  [1760164087.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:28:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/13
Oct 11 06:28:07 IQ138000 NetworkManager[403]: <info>  [1760164087.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:28:07 IQ138000 NetworkManager[403]: <info>  [1760164087.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:08 IQ138000 wb-watchdog[12816]: [INFO] Interval #12 started. Waiting up to 60 seconds for error...
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:12 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 NetworkManager[403]: <info>  [1760164093.3590] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:28:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:28:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:28:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:28:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:28:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:28:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:28:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:28:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:28:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:28:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:28:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:28:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:28:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:28:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:28:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:28:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:28:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:28:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:28:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:28:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:28:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:28:25 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:28:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:28:25 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:28:25 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:28:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:28:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:28:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:28:25 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:28:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:28:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:28:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:28:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:28:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:28:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:28:25 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:28:25 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:28:25 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:28:25 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:28:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:28:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:28:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:28:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:28:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:28:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:28:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:28:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:28:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:28:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:28:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:28:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:28:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:28:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:28:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:28:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:28:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:28:55 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:28:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:28:55 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:28:55 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:28:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:28:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:28:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:28:55 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:28:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:28:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:28:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:28:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:28:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:28:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:28:55 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:28:55 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:28:55 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:28:55 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:29:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:29:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:08 IQ138000 wb-watchdog[13425]: [INFO] Interval #13 started. Waiting up to 60 seconds for error...
Oct 11 06:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5672] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5677] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5683] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5743] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5764] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5766] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5891] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5917] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5941] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5945] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5947] Config: added 'scan_ssid' value '1'
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5948] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5949] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:29:08 IQ138000 NetworkManager[403]: <info>  [1760164148.5951] Config: added 'psk' value '<hidden>'
Oct 11 06:29:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/14
Oct 11 06:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:11 IQ138000 NetworkManager[403]: <info>  [1760164151.6661] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:29:11 IQ138000 NetworkManager[403]: <info>  [1760164151.6663] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:29:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:29:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:29:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:29:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:29:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:29:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:29:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:29:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:29:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:29:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:29:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:29:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:29:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:29:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:29:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:29:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:29:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:29:25 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:29:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:29:25 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:29:25 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:29:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:29:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:29:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:29:25 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:29:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:29:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:29:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:29:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:29:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:29:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:29:25 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:29:25 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:29:25 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:29:25 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:34 IQ138000 NetworkManager[403]: <warn>  [1760164174.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:29:34 IQ138000 NetworkManager[403]: <info>  [1760164174.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:29:34 IQ138000 NetworkManager[403]: <warn>  [1760164174.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:29:34 IQ138000 NetworkManager[403]: <info>  [1760164174.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:29:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/14
Oct 11 06:29:34 IQ138000 NetworkManager[403]: <info>  [1760164174.0770] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:29:34 IQ138000 NetworkManager[403]: <info>  [1760164174.0783] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:29:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:29:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:29:40 IQ138000 NetworkManager[403]: <info>  [1760164180.3375] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5888 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:29:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:29:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:29:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:29:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:29:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:29:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:29:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:29:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:29:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:29:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:29:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:29:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:29:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:29:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:29:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:29:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:29:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:29:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:29:55 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:29:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:29:55 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:29:55 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:29:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:29:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:29:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:29:55 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:29:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:29:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:29:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:29:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:29:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:29:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:29:55 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:29:55 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:29:55 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:29:55 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:29:57 IQ138000 ntpd[1651]: 89.109.251.28 local addr 10.37.94.94 -> <null>
Oct 11 06:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:29:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:29:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:08 IQ138000 wb-watchdog[14133]: [INFO] Interval #14 started. Waiting up to 60 seconds for error...
Oct 11 06:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:30:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:30:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:30:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:30:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:30:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:30:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:30:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:30:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:30:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:30:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:30:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:30:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:30:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:30:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:30:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:30:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:30:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:30:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:30:25 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:30:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:30:25 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:30:25 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:30:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:30:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:30:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:30:25 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:30:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:30:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:30:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:30:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:30:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:30:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:30:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:30:26 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:30:26 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:30:26 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:30:26 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6593] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6599] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6605] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6655] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6674] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6676] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6782] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6827] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6844] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6857] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6858] Config: added 'scan_ssid' value '1'
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6859] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6861] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.6862] Config: added 'psk' value '<hidden>'
Oct 11 06:30:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/15
Oct 11 06:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.7666] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:30:35 IQ138000 NetworkManager[403]: <info>  [1760164235.7668] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:30:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:30:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:30:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:30:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:30:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:30:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:30:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:30:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:30:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:30:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:30:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:30:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:30:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:30:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:30:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:30:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:30:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:30:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:30:56 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:30:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:30:56 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:30:56 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:30:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:30:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:30:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:30:56 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:30:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:30:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:30:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:30:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:30:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:30:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:30:56 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:30:56 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:30:56 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:30:56 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:31:01 IQ138000 NetworkManager[403]: <warn>  [1760164261.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:31:01 IQ138000 NetworkManager[403]: <info>  [1760164261.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:31:01 IQ138000 NetworkManager[403]: <warn>  [1760164261.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:31:01 IQ138000 NetworkManager[403]: <info>  [1760164261.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:31:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/15
Oct 11 06:31:01 IQ138000 NetworkManager[403]: <info>  [1760164261.0683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:31:01 IQ138000 NetworkManager[403]: <info>  [1760164261.0685] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:07 IQ138000 NetworkManager[403]: <info>  [1760164267.4249] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:08 IQ138000 wb-watchdog[14740]: [INFO] Interval #15 started. Waiting up to 60 seconds for error...
Oct 11 06:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:31:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:31:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:31:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:31:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:31:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:31:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:31:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:31:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:31:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:31:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:31:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:31:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:31:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:31:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:31:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:31:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:31:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:31:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:31:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:31:26 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:31:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:31:26 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:31:26 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:31:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:31:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:31:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:31:26 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:31:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:31:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:31:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:31:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:31:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:31:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:31:26 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:31:26 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:31:26 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:31:26 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:31:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:31:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:31:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:31:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:31:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:31:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:31:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:31:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:31:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:31:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:31:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:31:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:31:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:31:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:31:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:31:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:31:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:31:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:31:56 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:31:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:31:56 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:31:56 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:31:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:31:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:31:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:31:56 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:31:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:31:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:31:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:31:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:31:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:31:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:31:56 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:31:56 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:31:56 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:31:56 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5763] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5768] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5774] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5863] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5891] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5893] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.5984] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6010] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6045] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6048] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6049] Config: added 'scan_ssid' value '1'
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6050] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6052] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6052] Config: added 'psk' value '<hidden>'
Oct 11 06:32:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/16
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6810] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:32:02 IQ138000 NetworkManager[403]: <info>  [1760164322.6813] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:03 IQ138000 systemd[1]: Starting Cleanup of Temporary Directories...
Oct 11 06:32:03 IQ138000 systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
Oct 11 06:32:03 IQ138000 systemd[1]: Finished Cleanup of Temporary Directories.
Oct 11 06:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:32:08 IQ138000 wb-watchdog[15443]: [INFO] Interval #16 started. Waiting up to 60 seconds for error...
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:32:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:32:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:32:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:32:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:32:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:32:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:32:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:32:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:32:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:32:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:32:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:32:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:32:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:32:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:32:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:32:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:32:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:32:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:32:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:32:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:32:26 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:32:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:32:26 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:32:26 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:32:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:32:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:32:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:32:26 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:32:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:32:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:32:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:32:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:32:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:32:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:32:26 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:32:26 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:32:26 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:32:26 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:28 IQ138000 NetworkManager[403]: <warn>  [1760164348.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:32:28 IQ138000 NetworkManager[403]: <info>  [1760164348.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:32:28 IQ138000 NetworkManager[403]: <warn>  [1760164348.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:32:28 IQ138000 NetworkManager[403]: <info>  [1760164348.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:32:28 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:32:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/16
Oct 11 06:32:28 IQ138000 NetworkManager[403]: <info>  [1760164348.0645] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:32:28 IQ138000 NetworkManager[403]: <info>  [1760164348.0647] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:32:28 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 06:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:32:34 IQ138000 NetworkManager[403]: <info>  [1760164354.3277] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:32:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:32:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:32:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:32:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:32:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:32:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:32:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:32:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:32:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:32:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:32:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:32:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:32:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:32:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:32:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:32:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:32:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:32:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:32:56 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:32:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:32:56 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:32:56 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:32:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:32:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:32:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:32:56 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:32:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:32:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:32:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:32:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:32:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:32:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:32:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:32:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:32:57 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:32:57 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:32:57 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:32:57 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8756 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:08 IQ138000 wb-watchdog[16063]: [INFO] Interval #17 started. Waiting up to 60 seconds for error...
Oct 11 06:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:33:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:33:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:33:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:33:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:33:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:33:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:33:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:33:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:33:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:33:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:33:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:33:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:33:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:33:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:33:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:33:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:33:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:33:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:33:27 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:33:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:33:27 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:33:27 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:33:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:33:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:33:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:33:27 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:33:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:33:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:33:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:33:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:33:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:33:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:33:27 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:33:27 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:33:27 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:33:27 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5088] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5094] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5102] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5161] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5180] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5182] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5264] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5307] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5327] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5331] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5332] Config: added 'scan_ssid' value '1'
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5333] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5334] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:33:29 IQ138000 NetworkManager[403]: <info>  [1760164409.5335] Config: added 'psk' value '<hidden>'
Oct 11 06:33:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/17
Oct 11 06:33:31 IQ138000 NetworkManager[403]: <info>  [1760164411.6161] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:33:31 IQ138000 NetworkManager[403]: <info>  [1760164411.6166] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:55 IQ138000 NetworkManager[403]: <warn>  [1760164435.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:33:55 IQ138000 NetworkManager[403]: <info>  [1760164435.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:33:55 IQ138000 NetworkManager[403]: <warn>  [1760164435.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:33:55 IQ138000 NetworkManager[403]: <info>  [1760164435.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:33:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/17
Oct 11 06:33:55 IQ138000 NetworkManager[403]: <info>  [1760164435.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:33:55 IQ138000 NetworkManager[403]: <info>  [1760164435.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:33:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:33:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:33:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:33:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:33:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:33:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:33:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:33:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:33:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:33:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:33:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:33:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:33:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:33:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:33:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:33:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:33:57 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:33:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:33:57 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:33:57 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:33:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:33:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:33:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:33:57 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:33:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:33:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:33:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:33:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:33:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:33:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:33:57 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:33:57 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:33:57 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:33:57 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:34:01 IQ138000 NetworkManager[403]: <info>  [1760164441.2444] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:34:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:34:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:34:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:08 IQ138000 wb-watchdog[16766]: [INFO] Interval #18 started. Waiting up to 60 seconds for error...
Oct 11 06:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:34:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:34:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:34:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:34:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:34:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:34:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:34:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:34:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:34:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:34:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:34:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:34:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:34:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:34:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:34:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:34:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:34:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:34:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:34:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:34:27 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:34:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:34:27 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:34:27 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:34:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:34:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:34:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:34:27 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:34:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:34:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:34:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:34:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:34:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:34:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:34:27 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:34:27 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:34:27 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:34:27 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:34:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:34:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.6863] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.6869] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.6876] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7002] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7033] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7036] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7129] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7174] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7296] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7303] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7306] Config: added 'scan_ssid' value '1'
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7307] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7309] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.7311] Config: added 'psk' value '<hidden>'
Oct 11 06:34:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/18
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.8114] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:34:56 IQ138000 NetworkManager[403]: <info>  [1760164496.8127] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:34:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:34:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:34:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:34:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:34:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:34:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:34:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:34:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:34:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:34:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:34:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:34:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:34:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:34:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:34:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:34:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:34:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:34:57 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:34:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:34:57 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:34:57 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:34:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:34:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:34:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:34:57 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:34:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:34:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:34:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:34:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:34:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:34:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:34:57 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:34:57 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:34:57 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:34:57 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:34:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:34:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:35:01 IQ138000 CRON[17300]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 06:35:01 IQ138000 CRON[17309]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 06:35:01 IQ138000 CRON[17300]: pam_unix(cron:session): session closed for user root
Oct 11 06:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:08 IQ138000 wb-watchdog[17382]: [INFO] Interval #19 started. Waiting up to 60 seconds for error...
Oct 11 06:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:35:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:22 IQ138000 NetworkManager[403]: <warn>  [1760164522.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:35:22 IQ138000 NetworkManager[403]: <info>  [1760164522.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:35:22 IQ138000 NetworkManager[403]: <warn>  [1760164522.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:35:22 IQ138000 NetworkManager[403]: <info>  [1760164522.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/18
Oct 11 06:35:22 IQ138000 NetworkManager[403]: <info>  [1760164522.0630] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:35:22 IQ138000 NetworkManager[403]: <info>  [1760164522.0632] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:35:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:35:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:35:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:35:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:35:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:35:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:35:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:35:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:35:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:35:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:35:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:35:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:35:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:35:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:35:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:35:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:35:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:35:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:35:27 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:35:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:35:27 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:35:27 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:35:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:35:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:35:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:35:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:35:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:35:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:35:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:35:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:35:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:35:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:35:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:35:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:35:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:35:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:35:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:35:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:35:28 IQ138000 NetworkManager[403]: <info>  [1760164528.4730] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L3, row count 7183, limit 7042
Oct 11 06:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:35:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:35:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:35:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:35:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:35:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:35:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:35:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:35:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:35:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:35:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:35:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:35:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:35:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:35:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:35:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:35:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:35:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:35:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:35:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:35:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:35:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:35:58 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:35:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:35:58 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:35:58 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:35:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:35:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:35:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:35:58 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:35:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:35:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:35:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:35:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:35:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:35:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:35:58 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:35:58 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:35:58 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:35:58 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:08 IQ138000 wb-watchdog[18087]: [INFO] Interval #20 started. Waiting up to 60 seconds for error...
Oct 11 06:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8507] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8513] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8523] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8577] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8596] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8599] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8679] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8700] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8717] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8720] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8721] Config: added 'scan_ssid' value '1'
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8722] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8724] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.8724] Config: added 'psk' value '<hidden>'
Oct 11 06:36:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/19
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.9434] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:36:23 IQ138000 NetworkManager[403]: <info>  [1760164583.9436] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:36:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:36:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:36:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:36:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:36:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:36:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:36:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:36:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:36:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:36:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:36:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:36:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:36:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:36:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:36:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:36:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:36:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:36:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:36:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:36:28 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:36:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:36:28 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:36:28 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:36:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:36:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:36:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:36:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:36:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:36:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:36:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:36:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:36:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:36:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:36:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:36:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:36:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:36:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:36:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:36:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:49 IQ138000 NetworkManager[403]: <warn>  [1760164609.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:36:49 IQ138000 NetworkManager[403]: <info>  [1760164609.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:36:49 IQ138000 NetworkManager[403]: <warn>  [1760164609.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:36:49 IQ138000 NetworkManager[403]: <info>  [1760164609.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:36:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/19
Oct 11 06:36:49 IQ138000 NetworkManager[403]: <info>  [1760164609.0663] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:36:49 IQ138000 NetworkManager[403]: <info>  [1760164609.0665] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:55 IQ138000 NetworkManager[403]: <info>  [1760164615.6667] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:36:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:36:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:36:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:36:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:36:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:36:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:36:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:36:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:36:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:36:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:36:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:36:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:36:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:36:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:36:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:36:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:36:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:36:58 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:36:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:36:58 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:36:58 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:36:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:36:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:36:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:36:58 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:36:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:36:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:36:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:36:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:36:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:36:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:36:58 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:36:58 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:36:58 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:36:58 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:37:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:08 IQ138000 wb-watchdog[18697]: [INFO] Interval #21 started. Waiting up to 60 seconds for error...
Oct 11 06:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:37:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:37:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:37:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:37:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:37:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:37:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:37:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:37:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:37:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:37:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:37:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:37:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:37:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:37:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:37:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:37:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:37:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:37:28 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:37:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:37:28 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:37:28 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:37:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:37:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:37:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:37:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:37:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:37:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:37:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:37:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:37:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:37:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:37:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:37:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:37:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:37:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:37:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.0861] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.0866] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.0872] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.0935] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.0977] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.0979] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1077] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1106] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1125] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1130] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1131] Config: added 'scan_ssid' value '1'
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1132] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1133] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1134] Config: added 'psk' value '<hidden>'
Oct 11 06:37:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/20
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1799] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:37:51 IQ138000 NetworkManager[403]: <info>  [1760164671.1802] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:37:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:37:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:37:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:37:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:37:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:37:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:37:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:37:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:37:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:37:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:37:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:37:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:37:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:37:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:37:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:37:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:37:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:37:59 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:37:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:37:59 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:37:59 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:37:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:37:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:37:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:37:59 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:37:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:37:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:37:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:37:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:37:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:37:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:37:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:37:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:37:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:37:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:01 IQ138000 CRON[19344]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 06:38:01 IQ138000 CRON[19351]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 06:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:03 IQ138000 sSMTP[19371]: Unable to locate mail
Oct 11 06:38:03 IQ138000 sSMTP[19371]: Cannot open mail:25
Oct 11 06:38:03 IQ138000 cron[19371]: sendmail: Cannot open mail:25
Oct 11 06:38:03 IQ138000 CRON[19344]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 06:38:03 IQ138000 CRON[19344]: pam_unix(cron:session): session closed for user root
Oct 11 06:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:08 IQ138000 wb-watchdog[19422]: [INFO] Interval #22 started. Waiting up to 60 seconds for error...
Oct 11 06:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:38:16 IQ138000 NetworkManager[403]: <warn>  [1760164696.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:38:16 IQ138000 NetworkManager[403]: <info>  [1760164696.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:38:16 IQ138000 NetworkManager[403]: <warn>  [1760164696.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:38:16 IQ138000 NetworkManager[403]: <info>  [1760164696.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:38:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/20
Oct 11 06:38:16 IQ138000 NetworkManager[403]: <info>  [1760164696.0686] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:38:16 IQ138000 NetworkManager[403]: <info>  [1760164696.0688] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:38:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:38:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:21 IQ138000 NetworkManager[403]: <info>  [1760164701.8650] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:38:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:38:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:38:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:38:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:38:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:38:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:38:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:38:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:38:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:38:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:38:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:38:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:38:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:38:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:38:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:38:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:38:29 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:38:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:38:29 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:38:29 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:38:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:38:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:38:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:38:29 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:38:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:38:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:38:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:38:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:38:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:38:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:38:29 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:38:29 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:38:29 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:38:29 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10004 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:38:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:38:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:38:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:38:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:38:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:38:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:38:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:38:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:38:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:38:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:38:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:38:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:38:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:38:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:38:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:38:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:38:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:38:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:38:59 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:38:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:38:59 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:38:59 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:38:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:38:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:38:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:38:59 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:38:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:38:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:38:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:38:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:38:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:38:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:38:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:38:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:38:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:38:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:39:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:39:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:39:08 IQ138000 wb-watchdog[20032]: [INFO] Interval #23 started. Waiting up to 60 seconds for error...
Oct 11 06:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2695] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2702] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2709] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2763] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2779] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2781] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2865] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2886] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2907] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2911] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2912] Config: added 'scan_ssid' value '1'
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2914] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2916] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.2917] Config: added 'psk' value '<hidden>'
Oct 11 06:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/21
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.3758] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:39:17 IQ138000 NetworkManager[403]: <info>  [1760164757.3760] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:39:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:39:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:39:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:39:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:39:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:39:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:39:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:39:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:39:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:39:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:39:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:39:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:39:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:39:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:39:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:39:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:39:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:39:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:39:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:39:29 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:39:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:39:29 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:39:29 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:39:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:39:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:39:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:39:29 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:39:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:39:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:39:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:39:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:39:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:39:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:39:29 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:39:29 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:39:29 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:39:29 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:43 IQ138000 NetworkManager[403]: <warn>  [1760164783.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:39:43 IQ138000 NetworkManager[403]: <info>  [1760164783.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:39:43 IQ138000 NetworkManager[403]: <warn>  [1760164783.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:39:43 IQ138000 NetworkManager[403]: <info>  [1760164783.0290] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:39:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:39:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/21
Oct 11 06:39:43 IQ138000 NetworkManager[403]: <info>  [1760164783.0803] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:39:43 IQ138000 NetworkManager[403]: <info>  [1760164783.0805] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:39:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:39:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:39:49 IQ138000 NetworkManager[403]: <info>  [1760164789.0393] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:39:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:39:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:39:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:39:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:39:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:39:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:39:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:39:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:39:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:39:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:39:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:39:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:39:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:39:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:39:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:39:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:39:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:39:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:39:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:39:59 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:39:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:39:59 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:39:59 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:39:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:39:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:39:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:39:59 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:39:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:39:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:39:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:39:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:39:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:39:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:39:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:39:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:39:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:39:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:08 IQ138000 wb-watchdog[20729]: [INFO] Interval #24 started. Waiting up to 60 seconds for error...
Oct 11 06:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:40:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:40:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:40:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:40:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:40:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:40:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:40:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:40:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:40:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:40:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:40:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:40:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:40:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:40:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:40:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:40:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:40:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:40:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:40:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:40:30 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:40:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:40:30 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:40:30 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:40:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:40:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:40:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:40:30 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:40:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:40:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:40:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:40:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:40:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:40:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:40:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:40:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:40:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:40:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2658] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2663] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2670] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2724] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2749] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2750] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2827] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2846] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2863] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2867] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2868] Config: added 'scan_ssid' value '1'
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2869] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2870] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:40:44 IQ138000 NetworkManager[403]: <info>  [1760164844.2871] Config: added 'psk' value '<hidden>'
Oct 11 06:40:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/22
Oct 11 06:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:40:47 IQ138000 NetworkManager[403]: <info>  [1760164847.3942] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:40:47 IQ138000 NetworkManager[403]: <info>  [1760164847.3944] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:40:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:40:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:41:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:41:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:41:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:41:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:41:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:41:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:41:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:41:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:41:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:41:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:41:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:41:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:41:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:41:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:41:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:41:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:41:00 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:41:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:41:00 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:41:00 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:41:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:41:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:41:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:41:00 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:41:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:41:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:41:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:41:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:41:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:41:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:41:00 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:41:00 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:41:00 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:41:00 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:08 IQ138000 wb-watchdog[21338]: [INFO] Interval #25 started. Waiting up to 60 seconds for error...
Oct 11 06:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:10 IQ138000 NetworkManager[403]: <warn>  [1760164870.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:41:10 IQ138000 NetworkManager[403]: <info>  [1760164870.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:41:10 IQ138000 NetworkManager[403]: <warn>  [1760164870.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:41:10 IQ138000 NetworkManager[403]: <info>  [1760164870.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/22
Oct 11 06:41:10 IQ138000 NetworkManager[403]: <info>  [1760164870.0721] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:41:10 IQ138000 NetworkManager[403]: <info>  [1760164870.0723] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:16 IQ138000 NetworkManager[403]: <info>  [1760164876.0351] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:41:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:41:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:41:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:41:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:41:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:41:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:41:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:41:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:41:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:41:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:41:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:41:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:41:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:41:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:41:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:41:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:41:30 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:41:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:41:30 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:41:30 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:41:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:41:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:41:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:41:30 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:41:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:41:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:41:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:41:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:41:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:41:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:41:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:41:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:41:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:41:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:41:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:41:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:41:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:41:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:42:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:42:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:42:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:42:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:42:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:42:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:42:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:42:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:42:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:42:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:42:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:42:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:42:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:42:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:42:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:42:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:42:00 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:42:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:42:00 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:42:00 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:42:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:42:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:42:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:42:00 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:42:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:42:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:42:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:42:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:42:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:42:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:42:00 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:42:00 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:42:00 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:42:00 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:08 IQ138000 wb-watchdog[22047]: [INFO] Interval #26 started. Waiting up to 60 seconds for error...
Oct 11 06:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3684] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3689] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3694] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3770] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3795] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3797] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3879] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3896] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3912] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3915] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3916] Config: added 'scan_ssid' value '1'
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3917] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3918] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.3919] Config: added 'psk' value '<hidden>'
Oct 11 06:42:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/23
Oct 11 06:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.4858] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:42:11 IQ138000 NetworkManager[403]: <info>  [1760164931.4860] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:12 IQ138000 ntpd[1651]: 90.188.9.144 local addr 10.37.94.94 -> <null>
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:42:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:42:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:42:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:42:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:42:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:42:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:42:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:42:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:42:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:42:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:42:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:42:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:42:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:42:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:42:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:42:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:42:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:42:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:42:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:42:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:42:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:42:30 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:42:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:42:30 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:42:30 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:42:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:42:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:42:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:42:30 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:42:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:42:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:42:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:42:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:42:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:42:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:42:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:42:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:42:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:42:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:42:37 IQ138000 NetworkManager[403]: <warn>  [1760164957.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:42:37 IQ138000 NetworkManager[403]: <info>  [1760164957.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:42:37 IQ138000 NetworkManager[403]: <warn>  [1760164957.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:42:37 IQ138000 NetworkManager[403]: <info>  [1760164957.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:42:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/23
Oct 11 06:42:37 IQ138000 NetworkManager[403]: <info>  [1760164957.0641] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:42:37 IQ138000 NetworkManager[403]: <info>  [1760164957.0643] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:42:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:42:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:43 IQ138000 NetworkManager[403]: <info>  [1760164963.1406] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:42:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L3, row count 7183, limit 7042
Oct 11 06:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:43:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:43:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:43:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:43:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:43:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:43:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:43:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:43:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:43:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:43:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:43:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:43:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:43:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:43:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:43:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:43:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:43:01 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:43:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:43:01 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:43:01 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:43:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:43:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:43:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:43:01 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:43:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:43:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:43:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:43:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:43:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:43:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:43:01 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:43:01 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:43:01 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:43:01 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:08 IQ138000 wb-watchdog[22662]: [INFO] Interval #27 started. Waiting up to 60 seconds for error...
Oct 11 06:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17410 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:43:18 IQ138000 ntpd[1651]: 82.146.53.58 local addr 10.37.94.94 -> <null>
Oct 11 06:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:43:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:43:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:43:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:43:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:43:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:43:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:43:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:43:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:43:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:43:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:43:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:43:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:43:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:43:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:43:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:43:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:43:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:43:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:43:31 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:43:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:43:31 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:43:31 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:43:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:43:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:43:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:43:31 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:43:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:43:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:43:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:43:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:43:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:43:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:43:31 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:43:31 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:43:31 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:43:31 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:43:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4399] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4415] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4423] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4530] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4577] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4589] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:43:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:43:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4736] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4774] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4800] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4804] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4805] Config: added 'scan_ssid' value '1'
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4806] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4807] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.4808] Config: added 'psk' value '<hidden>'
Oct 11 06:43:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/24
Oct 11 06:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.5503] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:43:38 IQ138000 NetworkManager[403]: <info>  [1760165018.5505] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:44:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:44:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:44:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:44:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:44:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:44:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:44:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:44:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:44:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:44:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:44:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:44:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:44:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:44:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:44:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:44:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:44:01 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:44:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:44:01 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:44:01 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:44:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:44:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:44:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:44:01 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:44:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:44:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:44:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:44:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:44:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:44:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:44:01 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:44:01 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:44:01 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:44:01 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:04 IQ138000 NetworkManager[403]: <warn>  [1760165044.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:44:04 IQ138000 NetworkManager[403]: <info>  [1760165044.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:44:04 IQ138000 NetworkManager[403]: <warn>  [1760165044.0238] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:44:04 IQ138000 NetworkManager[403]: <info>  [1760165044.0251] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:44:04 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:44:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/24
Oct 11 06:44:04 IQ138000 NetworkManager[403]: <info>  [1760165044.0662] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:44:04 IQ138000 NetworkManager[403]: <info>  [1760165044.0664] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:04 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:08 IQ138000 wb-watchdog[23380]: [INFO] Interval #28 started. Waiting up to 60 seconds for error...
Oct 11 06:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:10 IQ138000 NetworkManager[403]: <info>  [1760165050.1880] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:44:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:44:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:44:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:44:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:44:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:44:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:44:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:44:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:44:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:44:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:44:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:44:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:44:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:44:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:44:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:44:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:44:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:44:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:44:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:44:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:44:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:44:31 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:44:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:44:31 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:44:31 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:44:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:44:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:44:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:44:31 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:44:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:44:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:44:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:44:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:44:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:44:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:44:31 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:44:31 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:44:31 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:44:31 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:44:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:44:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:44:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:44:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:01 IQ138000 CRON[23898]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 06:45:01 IQ138000 CRON[23902]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 06:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:01 IQ138000 CRON[23898]: pam_unix(cron:session): session closed for user root
Oct 11 06:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:45:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:45:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:45:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:45:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:45:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:45:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:45:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:45:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:45:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:45:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:45:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:45:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:45:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:45:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:45:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:45:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:45:01 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:45:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:45:01 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:45:01 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:45:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:45:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:45:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:45:01 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:45:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:45:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:45:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:45:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:45:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:45:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:45:01 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:45:01 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:45:01 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:45:01 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4320] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4325] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4348] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4454] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4482] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4485] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4649] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4687] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4720] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4724] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4725] Config: added 'scan_ssid' value '1'
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4726] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4728] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:45:05 IQ138000 NetworkManager[403]: <info>  [1760165105.4729] Config: added 'psk' value '<hidden>'
Oct 11 06:45:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/25
Oct 11 06:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:08 IQ138000 NetworkManager[403]: <info>  [1760165108.5514] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:45:08 IQ138000 NetworkManager[403]: <info>  [1760165108.5517] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:45:08 IQ138000 wb-watchdog[23984]: [INFO] Interval #29 started. Waiting up to 60 seconds for error...
Oct 11 06:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:45:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:45:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:31 IQ138000 NetworkManager[403]: <warn>  [1760165131.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:45:31 IQ138000 NetworkManager[403]: <info>  [1760165131.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:45:31 IQ138000 NetworkManager[403]: <warn>  [1760165131.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:45:31 IQ138000 NetworkManager[403]: <info>  [1760165131.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/25
Oct 11 06:45:31 IQ138000 NetworkManager[403]: <info>  [1760165131.0757] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:45:31 IQ138000 NetworkManager[403]: <info>  [1760165131.0759] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:45:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:45:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:45:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:45:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:45:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:45:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:45:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:45:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:45:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:45:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:45:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:45:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:45:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:45:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:45:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:45:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:45:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:45:32 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:45:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:45:32 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:45:32 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:45:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:45:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:45:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:45:32 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:45:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:45:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:45:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:45:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:45:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:45:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:45:32 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:45:32 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:45:32 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:45:32 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:36 IQ138000 ntpd[1651]: 91.235.144.128 local addr 10.37.94.94 -> <null>
Oct 11 06:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L1, row count 7183, limit 7042
Oct 11 06:45:37 IQ138000 NetworkManager[403]: <info>  [1760165137.1949] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:46:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:46:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:46:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:46:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:46:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:46:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:46:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:46:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:46:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:46:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:46:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:46:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:46:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:46:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:46:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:46:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:46:02 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:46:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:46:02 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:46:02 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:46:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:46:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:46:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:46:02 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:46:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:46:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:46:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:46:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:46:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:46:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:46:02 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:46:02 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:46:02 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:46:02 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:08 IQ138000 wb-watchdog[24686]: [INFO] Interval #30 started. Waiting up to 60 seconds for error...
Oct 11 06:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 06:46:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5394 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:46:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:46:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:46:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4359] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4369] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4382] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4561] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4591] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4593] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4758] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4807] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4839] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4843] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4845] Config: added 'scan_ssid' value '1'
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4854] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4855] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.4856] Config: added 'psk' value '<hidden>'
Oct 11 06:46:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/26
Oct 11 06:46:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:46:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:46:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:46:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:46:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:46:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:46:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:46:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:46:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:46:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:46:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:46:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:46:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:46:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:46:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:46:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:46:32 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:46:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:46:32 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:46:32 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:46:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:46:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:46:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:46:32 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:46:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:46:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.5907] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:46:32 IQ138000 NetworkManager[403]: <info>  [1760165192.5910] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:46:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:46:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:46:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:46:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:46:32 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:46:32 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:46:32 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:46:32 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:46 IQ138000 ntpd[1651]: 85.193.65.152 local addr 10.37.94.94 -> <null>
Oct 11 06:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:46:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:46:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:46:58 IQ138000 NetworkManager[403]: <warn>  [1760165218.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:46:58 IQ138000 NetworkManager[403]: <info>  [1760165218.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:46:58 IQ138000 NetworkManager[403]: <warn>  [1760165218.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:46:58 IQ138000 NetworkManager[403]: <info>  [1760165218.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:46:58 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:46:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/26
Oct 11 06:46:58 IQ138000 NetworkManager[403]: <info>  [1760165218.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:46:58 IQ138000 NetworkManager[403]: <info>  [1760165218.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:46:58 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:47:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:47:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:47:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:47:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:47:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:47:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:47:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:47:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:47:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:47:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:47:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:47:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:47:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:47:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:47:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:47:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:47:02 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:47:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:47:02 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:47:02 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:47:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:47:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:47:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:47:02 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:47:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:47:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:47:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:47:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:47:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:47:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:47:02 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:47:02 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:47:02 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:47:02 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:04 IQ138000 NetworkManager[403]: <info>  [1760165224.2335] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:08 IQ138000 wb-watchdog[25296]: [INFO] Interval #31 started. Waiting up to 60 seconds for error...
Oct 11 06:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:47:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:47:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5888 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 06:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:47:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:47:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:47:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:47:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:47:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:47:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:47:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:47:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:47:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:47:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:47:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:47:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:47:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:47:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:47:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:47:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:47:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:47:32 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:47:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:47:32 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:47:32 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:47:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:47:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:47:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:47:32 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:47:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:47:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:47:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:47:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:47:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:47:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:47:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:47:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:47:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:47:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:47:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:47:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16936 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L1, row count 7183, limit 7042
Oct 11 06:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:52 IQ138000 ntpd[1651]: 195.122.253.38 local addr 10.37.94.94 -> <null>
Oct 11 06:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4671] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4676] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4682] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4744] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4764] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4766] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4847] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4868] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4885] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4888] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4890] Config: added 'scan_ssid' value '1'
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4890] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4892] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:47:59 IQ138000 NetworkManager[403]: <info>  [1760165279.4892] Config: added 'psk' value '<hidden>'
Oct 11 06:47:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/27
Oct 11 06:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:48:02 IQ138000 NetworkManager[403]: <info>  [1760165282.5734] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:48:02 IQ138000 NetworkManager[403]: <info>  [1760165282.5737] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:48:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:48:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:48:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:48:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:48:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:48:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:48:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:48:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:48:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:48:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:48:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:48:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:48:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:48:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:48:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:48:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:48:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:48:03 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:48:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:48:03 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:48:03 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:48:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:48:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:48:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:48:03 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:48:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:48:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:48:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:48:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:48:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:48:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:48:03 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:48:03 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:48:03 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:48:03 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:48:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:48:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:08 IQ138000 wb-watchdog[26014]: [INFO] Interval #32 started. Waiting up to 60 seconds for error...
Oct 11 06:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:25 IQ138000 NetworkManager[403]: <warn>  [1760165305.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:48:25 IQ138000 NetworkManager[403]: <info>  [1760165305.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:48:25 IQ138000 NetworkManager[403]: <warn>  [1760165305.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:48:25 IQ138000 NetworkManager[403]: <info>  [1760165305.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:48:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/27
Oct 11 06:48:25 IQ138000 NetworkManager[403]: <info>  [1760165305.0646] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:48:25 IQ138000 NetworkManager[403]: <info>  [1760165305.0648] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:48:31 IQ138000 NetworkManager[403]: <info>  [1760165311.2173] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:48:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:48:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:48:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:48:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:48:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:48:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:48:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:48:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:48:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:48:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:48:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:48:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:48:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:48:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:48:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:48:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:48:33 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:48:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:48:33 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:48:33 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:48:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:48:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:48:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:48:33 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:48:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:48:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:48:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:48:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:48:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:48:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:48:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:48:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:48:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:48:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:48:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:48:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L1, row count 7183, limit 7042
Oct 11 06:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:49:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:49:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:49:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:49:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:49:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:49:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:49:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:49:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:49:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:49:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:49:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:49:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:49:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:49:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:49:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:49:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:49:03 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:49:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:49:03 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:49:03 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:49:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:49:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:49:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:49:03 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:49:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:49:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:49:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:49:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:49:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:49:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:49:03 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:49:03 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:49:03 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:49:03 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:08 IQ138000 wb-watchdog[26620]: [INFO] Interval #33 started. Waiting up to 60 seconds for error...
Oct 11 06:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.3907] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.3919] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.3926] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4074] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4109] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4125] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4340] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4418] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4463] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4479] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4480] Config: added 'scan_ssid' value '1'
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4481] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4487] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.4488] Config: added 'psk' value '<hidden>'
Oct 11 06:49:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/28
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.5228] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:49:26 IQ138000 NetworkManager[403]: <info>  [1760165366.5240] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:49:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:49:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:49:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:49:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:49:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:49:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:49:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:49:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:49:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:49:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:49:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:49:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:49:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:49:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:49:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:49:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:49:33 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:49:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:49:33 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:49:33 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:49:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:49:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:49:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:49:33 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:49:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:49:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:49:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:49:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:49:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:49:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:49:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:49:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:49:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:49:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:49:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:49:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:49:52 IQ138000 NetworkManager[403]: <warn>  [1760165392.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:49:52 IQ138000 NetworkManager[403]: <info>  [1760165392.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:49:52 IQ138000 NetworkManager[403]: <warn>  [1760165392.0305] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:49:52 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:49:52 IQ138000 NetworkManager[403]: <info>  [1760165392.0346] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:49:52 IQ138000 NetworkManager[403]: <info>  [1760165392.0349] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:49:52 IQ138000 NetworkManager[403]: <info>  [1760165392.0393] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:49:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/28
Oct 11 06:49:52 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:49:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:49:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:49:58 IQ138000 NetworkManager[403]: <info>  [1760165398.1547] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:50:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:50:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:50:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:50:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:50:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:50:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:50:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:50:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:50:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:50:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:50:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:50:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:50:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:50:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:50:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:50:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:50:03 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:50:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:50:03 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:50:03 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:50:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:50:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:50:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:50:03 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:50:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:50:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:50:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:50:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:50:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:50:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:50:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:50:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:50:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:50:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:50:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:50:08 IQ138000 wb-watchdog[27323]: [INFO] Interval #34 started. Waiting up to 60 seconds for error...
Oct 11 06:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 06:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:50:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:50:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:50:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:50:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:50:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:50:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:50:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:50:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:50:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:50:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:50:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:50:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:50:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:50:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:50:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:50:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:50:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:50:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:50:34 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:50:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:50:34 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:50:34 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:50:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:50:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:50:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:50:34 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:50:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:50:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:50:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:50:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:50:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:50:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:50:34 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:50:34 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:50:34 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:50:34 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5270] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5274] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5281] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5337] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5356] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5358] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5441] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5462] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5478] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5481] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5482] Config: added 'scan_ssid' value '1'
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5483] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5484] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:50:53 IQ138000 NetworkManager[403]: <info>  [1760165453.5485] Config: added 'psk' value '<hidden>'
Oct 11 06:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:50:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/29
Oct 11 06:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:50:55 IQ138000 NetworkManager[403]: <info>  [1760165455.6398] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:50:55 IQ138000 NetworkManager[403]: <info>  [1760165455.6424] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:50:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:50:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:51:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:51:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:51:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:51:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:51:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:51:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:51:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:51:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:51:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:51:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:51:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:51:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:51:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:51:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:51:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:51:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:51:04 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:51:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:51:04 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:51:04 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:51:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:51:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:51:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:51:04 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:51:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:51:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:51:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:51:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:51:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:51:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:51:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:51:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:51:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:51:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:51:08 IQ138000 wb-watchdog[27931]: [INFO] Interval #35 started. Waiting up to 60 seconds for error...
Oct 11 06:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:51:19 IQ138000 NetworkManager[403]: <warn>  [1760165479.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:51:19 IQ138000 NetworkManager[403]: <info>  [1760165479.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:51:19 IQ138000 NetworkManager[403]: <warn>  [1760165479.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:51:19 IQ138000 NetworkManager[403]: <info>  [1760165479.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:51:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/29
Oct 11 06:51:19 IQ138000 NetworkManager[403]: <info>  [1760165479.0706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:51:19 IQ138000 NetworkManager[403]: <info>  [1760165479.0708] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:51:25 IQ138000 NetworkManager[403]: <info>  [1760165485.3024] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:51:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:51:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:51:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:51:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:51:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:51:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:51:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:51:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:51:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:51:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:51:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:51:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:51:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:51:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:51:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:51:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:51:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:51:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:51:34 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:51:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:51:34 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:51:34 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:51:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:51:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:51:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:51:34 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:51:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:51:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:51:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:51:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:51:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:51:34 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:51:34 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:51:34 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:51:34 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L2, row count 7183, limit 7042
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:51:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:51:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:51:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:51:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:52:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:52:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:52:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:52:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:52:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:52:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:52:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:52:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:52:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:52:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:52:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:52:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:52:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:52:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:52:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:52:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:52:04 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:52:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:52:04 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:52:04 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:52:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:52:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:52:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:52:04 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:52:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:52:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:52:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:52:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:52:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:52:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:52:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:52:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:52:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:52:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:08 IQ138000 wb-watchdog[28632]: [INFO] Interval #36 started. Waiting up to 60 seconds for error...
Oct 11 06:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:52:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:52:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:52:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0360] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0377] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0384] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0437] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0456] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0458] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0560] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0582] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0603] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0606] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0608] Config: added 'scan_ssid' value '1'
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0609] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0610] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.0610] Config: added 'psk' value '<hidden>'
Oct 11 06:52:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/30
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.1365] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:52:21 IQ138000 NetworkManager[403]: <info>  [1760165541.1377] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:52:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:52:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:52:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:52:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:52:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:52:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:52:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:52:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:52:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:52:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:52:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:52:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:52:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:52:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:52:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:52:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:52:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:52:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:52:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:52:35 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:52:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:52:35 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:52:35 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:52:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:52:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:52:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:52:35 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:52:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:52:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:52:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:52:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:52:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:52:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:52:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:52:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:52:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:52:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:52:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:52:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:46 IQ138000 NetworkManager[403]: <warn>  [1760165566.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:52:46 IQ138000 NetworkManager[403]: <info>  [1760165566.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:52:46 IQ138000 NetworkManager[403]: <warn>  [1760165566.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:52:46 IQ138000 NetworkManager[403]: <info>  [1760165566.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:52:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/30
Oct 11 06:52:46 IQ138000 NetworkManager[403]: <info>  [1760165566.0745] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:52:46 IQ138000 NetworkManager[403]: <info>  [1760165566.0747] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:51 IQ138000 NetworkManager[403]: <info>  [1760165571.7957] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:52:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:52:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:53:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:53:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:53:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:53:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:53:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:53:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:53:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:53:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:53:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:53:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:53:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:53:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:53:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:53:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:53:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:53:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:53:05 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:53:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:53:05 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:53:05 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:53:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:53:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:53:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:53:05 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:53:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:53:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:53:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:53:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:53:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:53:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:53:05 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:53:05 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:53:05 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:53:05 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:53:08 IQ138000 wb-watchdog[29252]: [INFO] Interval #37 started. Waiting up to 60 seconds for error...
Oct 11 06:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 06:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:53:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:53:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:53:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:53:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:53:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:53:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:53:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:53:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:53:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:53:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:53:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:53:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:53:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:53:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:53:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:53:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:53:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:53:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:53:35 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:53:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:53:35 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:53:35 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:53:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:53:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:53:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:53:35 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:53:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:53:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:53:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:53:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:53:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:53:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:53:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:53:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:53:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:53:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L1, row count 7183, limit 7042
Oct 11 06:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9520] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9537] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9543] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9595] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9618] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9620] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9725] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9748] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9765] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9771] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9772] Config: added 'scan_ssid' value '1'
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9773] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9775] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:53:46 IQ138000 NetworkManager[403]: <info>  [1760165626.9775] Config: added 'psk' value '<hidden>'
Oct 11 06:53:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/31
Oct 11 06:53:47 IQ138000 NetworkManager[403]: <info>  [1760165627.0502] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:53:47 IQ138000 NetworkManager[403]: <info>  [1760165627.0504] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:54:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:54:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:54:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:54:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:54:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:54:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:54:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:54:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:54:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:54:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:54:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:54:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:54:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:54:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:54:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:54:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:54:05 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:54:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:54:05 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:54:05 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:54:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:54:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:54:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:54:05 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:54:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:54:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:54:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:54:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:54:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:54:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:54:05 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:54:05 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:54:05 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:54:05 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:54:08 IQ138000 wb-watchdog[29955]: [INFO] Interval #38 started. Waiting up to 60 seconds for error...
Oct 11 06:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:12 IQ138000 NetworkManager[403]: <warn>  [1760165652.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:54:12 IQ138000 NetworkManager[403]: <info>  [1760165652.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:54:12 IQ138000 NetworkManager[403]: <warn>  [1760165652.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:54:12 IQ138000 NetworkManager[403]: <info>  [1760165652.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:54:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/31
Oct 11 06:54:12 IQ138000 NetworkManager[403]: <info>  [1760165652.1784] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:54:12 IQ138000 NetworkManager[403]: <info>  [1760165652.1787] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:17 IQ138000 NetworkManager[403]: <info>  [1760165657.8187] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:54:18 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:54:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:54:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:54:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:54:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:54:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:54:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:54:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:54:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:54:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:54:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:54:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:54:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:54:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:54:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:54:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:54:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:54:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:54:35 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:54:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:54:35 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:54:35 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:54:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:54:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:54:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:54:35 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:54:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:54:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:54:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:54:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:54:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:54:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:54:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:54:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:54:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:54:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:54:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:54:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:54:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:54:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:54:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:54:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:54:56 IQ138000 npm[3801]: [2025-10-11 06:54:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.93,"last_seen":1760165696245,"linkquality":91,"power_outage_count":48745,"temperature":24.79,"voltage":3025}'
Oct 11 06:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:54:56 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Command: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760165876551,"cmd_timestamp_ms":1760165696551,"source":"regulation"}
Oct 11 06:54:56 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760165876551,"cmd_timestamp_ms":1760165696551,"source":"regulation"}
Oct 11 06:54:56 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760165876562,"cmd_timestamp_ms":1760165696562,"source":"regulation"}
Oct 11 06:54:56 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760165876562,"cmd_timestamp_ms":1760165696562,"source":"regulation"}
Oct 11 06:54:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L3, row count 7183, limit 7042
Oct 11 06:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L2, row count 7183, limit 7042
Oct 11 06:54:57 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 06:54:57 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 06:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:01 IQ138000 CRON[30494]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 06:55:01 IQ138000 CRON[30498]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 06:55:01 IQ138000 CRON[30494]: pam_unix(cron:session): session closed for user root
Oct 11 06:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:55:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:55:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:55:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:55:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:55:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:55:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:55:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:55:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:55:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:55:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:55:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:55:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:55:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:55:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:55:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:55:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:55:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:55:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:55:06 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:55:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:55:06 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:55:06 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:55:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:55:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:55:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:55:06 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:55:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:55:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:55:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:55:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:55:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:55:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:55:06 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:55:06 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:55:06 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:55:06 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:08 IQ138000 wb-watchdog[30575]: [INFO] Interval #39 started. Waiting up to 60 seconds for error...
Oct 11 06:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2081] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2105] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2112] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2179] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2197] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2200] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2369] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2387] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2403] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2406] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2407] Config: added 'scan_ssid' value '1'
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2408] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2410] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.2411] Config: added 'psk' value '<hidden>'
Oct 11 06:55:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/32
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.3175] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:55:13 IQ138000 NetworkManager[403]: <info>  [1760165713.3177] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:55:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:55:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:32 IQ138000 npm[3801]: [2025-10-11 06:55:32] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.93,"last_seen":1760165732177,"linkquality":94,"power_outage_count":48745,"temperature":24.83,"voltage":3025}'
Oct 11 06:55:32 IQ138000 npm[3801]: [2025-10-11 06:55:32] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.88,"last_seen":1760165732216,"linkquality":91,"power_outage_count":48745,"temperature":24.83,"voltage":3025}'
Oct 11 06:55:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:55:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:55:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:55:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:55:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:55:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:55:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:55:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:55:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:55:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:55:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:55:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:55:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:55:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:55:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:55:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:55:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:55:36 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:55:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:55:36 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:55:36 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:55:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:55:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:55:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:55:36 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:55:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:55:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:55:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:55:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:55:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:55:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:55:36 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:55:36 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:55:36 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:55:36 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:38 IQ138000 NetworkManager[403]: <warn>  [1760165738.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:55:38 IQ138000 NetworkManager[403]: <info>  [1760165738.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:55:38 IQ138000 NetworkManager[403]: <warn>  [1760165738.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:55:38 IQ138000 NetworkManager[403]: <info>  [1760165738.0282] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:55:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/32
Oct 11 06:55:38 IQ138000 NetworkManager[403]: <info>  [1760165738.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:55:38 IQ138000 NetworkManager[403]: <info>  [1760165738.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 06:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:43 IQ138000 NetworkManager[403]: <info>  [1760165743.9726] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:56:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:56:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:56:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:56:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:56:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:56:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:56:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:56:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:56:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:56:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:56:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:56:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:56:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:56:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:56:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:56:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:56:06 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:56:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:56:06 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:56:06 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:56:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:56:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:56:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:56:06 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:56:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:56:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:56:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:56:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:56:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:56:06 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:56:06 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:56:06 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:56:06 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:08 IQ138000 wb-watchdog[31292]: [INFO] Interval #40 started. Waiting up to 60 seconds for error...
Oct 11 06:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 06:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:56:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:56:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:56:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:56:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:56:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:56:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:56:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:56:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:56:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:56:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:56:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:56:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:56:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:56:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:56:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:56:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:56:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:56:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:56:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:56:36 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:56:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:56:36 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:56:36 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:56:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:56:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:56:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:56:36 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:56:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:56:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:56:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:56:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:56:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:56:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:56:36 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:56:36 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:56:36 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:56:36 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3611] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3630] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3640] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3727] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3747] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3749] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3856] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3887] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3915] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3918] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3919] Config: added 'scan_ssid' value '1'
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3931] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3933] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.3935] Config: added 'psk' value '<hidden>'
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/33
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.4930] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:56:39 IQ138000 NetworkManager[403]: <info>  [1760165799.4932] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:56:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:56:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:05 IQ138000 NetworkManager[403]: <warn>  [1760165825.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:57:05 IQ138000 NetworkManager[403]: <info>  [1760165825.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:57:05 IQ138000 NetworkManager[403]: <warn>  [1760165825.0237] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:57:05 IQ138000 NetworkManager[403]: <info>  [1760165825.0250] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:57:05 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:57:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/33
Oct 11 06:57:05 IQ138000 NetworkManager[403]: <info>  [1760165825.0710] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:57:05 IQ138000 NetworkManager[403]: <info>  [1760165825.0718] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:05 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:57:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:57:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:57:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:57:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:57:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:57:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:57:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:57:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:57:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:57:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:57:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:57:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:57:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:57:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:57:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:57:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:57:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:57:06 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:57:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:57:06 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:57:06 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:57:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:57:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:57:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:57:06 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:57:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:57:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:57:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:57:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:57:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:57:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:57:06 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:57:06 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:57:06 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:57:06 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:57:08 IQ138000 wb-watchdog[31888]: [INFO] Interval #41 started. Waiting up to 60 seconds for error...
Oct 11 06:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:11 IQ138000 NetworkManager[403]: <info>  [1760165831.1423] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 06:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:57:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:57:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:57:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:57:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:57:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:57:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:57:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:57:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:57:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:57:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:57:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:57:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:57:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:57:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:57:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:57:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:57:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:57:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:57:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:57:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:57:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:57:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:57:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:57:37 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:57:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:57:37 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:57:37 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:57:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:57:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:57:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:57:37 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:57:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:57:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:57:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:57:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:57:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:57:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:57:37 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:57:37 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:57:37 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:57:37 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:57:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:57:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4414] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4420] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4426] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4498] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4521] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4523] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4666] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4720] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4777] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4780] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4781] Config: added 'scan_ssid' value '1'
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4782] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4783] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:58:06 IQ138000 NetworkManager[403]: <info>  [1760165886.4784] Config: added 'psk' value '<hidden>'
Oct 11 06:58:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/34
Oct 11 06:58:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:58:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:58:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:58:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:58:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:58:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:58:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:58:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:58:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:58:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:58:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:58:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:58:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:58:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:58:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:58:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:58:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:58:07 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:58:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:58:07 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:58:07 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:58:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:58:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:58:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:58:07 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:58:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:58:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:58:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:58:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:58:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:58:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:58:07 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:58:07 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:58:07 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:58:07 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:08 IQ138000 wb-watchdog[32608]: [INFO] Interval #42 started. Waiting up to 60 seconds for error...
Oct 11 06:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:09 IQ138000 NetworkManager[403]: <info>  [1760165889.5523] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:58:09 IQ138000 NetworkManager[403]: <info>  [1760165889.5525] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 06:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:58:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:32 IQ138000 NetworkManager[403]: <warn>  [1760165912.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:58:32 IQ138000 NetworkManager[403]: <info>  [1760165912.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:58:32 IQ138000 NetworkManager[403]: <warn>  [1760165912.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:58:32 IQ138000 NetworkManager[403]: <info>  [1760165912.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:58:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/34
Oct 11 06:58:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:32 IQ138000 NetworkManager[403]: <info>  [1760165912.0623] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:58:32 IQ138000 NetworkManager[403]: <info>  [1760165912.0624] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:58:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:58:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:58:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:58:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:58:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:58:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:58:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:58:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:58:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:58:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:58:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:58:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:58:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:58:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:58:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:58:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:58:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:58:37 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:58:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:58:37 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:58:37 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:58:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:58:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:58:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:58:37 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:58:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:58:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:58:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:58:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:58:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:58:37 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:58:37 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:58:37 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:58:37 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:38 IQ138000 NetworkManager[403]: <info>  [1760165918.2331] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 06:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 06:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:58:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 06:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:58:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:58:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 06:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 06:59:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:59:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:59:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:59:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:59:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:59:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:59:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:59:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:59:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:59:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:59:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:59:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:59:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:59:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:59:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:59:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:59:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:59:07 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:59:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:59:07 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:59:07 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:59:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:59:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:59:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:59:07 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:59:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:59:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:59:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:59:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:59:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:59:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:59:07 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:59:07 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:59:07 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:59:07 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:59:08 IQ138000 wb-watchdog[774]: [INFO] Interval #43 started. Waiting up to 60 seconds for error...
Oct 11 06:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 06:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 06:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 06:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 06:59:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 06:59:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 06:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4157] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4162] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4167] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4246] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4321] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4333] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4557] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4595] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4656] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4660] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4661] Config: added 'scan_ssid' value '1'
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4661] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4662] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.4663] Config: added 'psk' value '<hidden>'
Oct 11 06:59:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/35
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.5450] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 06:59:33 IQ138000 NetworkManager[403]: <info>  [1760165973.5459] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 06:59:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 06:59:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 06:59:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 06:59:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 06:59:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 06:59:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 06:59:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 06:59:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 06:59:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 06:59:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 06:59:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 06:59:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 06:59:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 06:59:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 06:59:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 06:59:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 06:59:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 06:59:37 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 06:59:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 06:59:37 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 06:59:37 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 06:59:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 06:59:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:59:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 06:59:37 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 06:59:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 06:59:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:59:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 06:59:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 06:59:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 06:59:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 06:59:37 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 06:59:37 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 06:59:37 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 06:59:37 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 06:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:59:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 06:59:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 06:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 06:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 06:59:59 IQ138000 NetworkManager[403]: <warn>  [1760165999.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 06:59:59 IQ138000 NetworkManager[403]: <info>  [1760165999.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 06:59:59 IQ138000 NetworkManager[403]: <warn>  [1760165999.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 06:59:59 IQ138000 NetworkManager[403]: <info>  [1760165999.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 06:59:59 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:59:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/35
Oct 11 06:59:59 IQ138000 NetworkManager[403]: <info>  [1760165999.0773] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 06:59:59 IQ138000 NetworkManager[403]: <info>  [1760165999.0775] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 06:59:59 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 06:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:00:05 IQ138000 NetworkManager[403]: <info>  [1760166005.1711] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:00:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:00:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:00:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:00:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:00:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:00:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:00:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:00:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:00:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:00:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:00:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:00:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:00:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:00:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:00:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:00:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:00:08 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:00:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:00:08 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:00:08 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:00:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:00:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:00:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:00:08 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:00:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:00:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:00:08 IQ138000 wb-watchdog[1467]: [INFO] Interval #44 started. Waiting up to 60 seconds for error...
Oct 11 07:00:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:00:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:00:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:00:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:00:08 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:00:08 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:00:08 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:00:08 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:09 IQ138000 npm[3801]: [2025-10-11 07:00:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.29,"last_seen":1760166009553,"linkquality":40,"power_outage_count":25795,"pressure":993.7,"temperature":20.26,"voltage":2995}'
Oct 11 07:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:00:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-11 10:00:14.010+00:00
Oct 11 07:00:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 07:00:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-11T10:00:14.010Z","to":"2025-10-11T22:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 07:00:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760166194021,"cmd_timestamp_ms":1760166014021,"source":"schedule"}
Oct 11 07:00:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760166194021,"cmd_timestamp_ms":1760166014021,"source":"schedule"}
Oct 11 07:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:15 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {0}[0]
Oct 11 07:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:00:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:00:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:00:29 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Command: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760166209027,"cmd_timestamp_ms":1760166029027,"source":"regulation"}
Oct 11 07:00:29 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760166209027,"cmd_timestamp_ms":1760166029027,"source":"regulation"}
Oct 11 07:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:30 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 07:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:00:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:00:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:00:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:00:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:00:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:00:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:00:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:00:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:00:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:00:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:00:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:00:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:00:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:00:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:00:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:00:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:00:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:00:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:00:38 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:00:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:00:38 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:00:38 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:00:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:00:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:00:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:00:38 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:00:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:00:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:00:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:00:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:00:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:00:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:00:38 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:00:38 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:00:38 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:00:38 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:00:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:00:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L3, row count 7183, limit 7042
Oct 11 07:00:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L1, row count 7183, limit 7042
Oct 11 07:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5163] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5167] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5173] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5319] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5340] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5342] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5429] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5448] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5468] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5471] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5472] Config: added 'scan_ssid' value '1'
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5473] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5474] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:01:00 IQ138000 NetworkManager[403]: <info>  [1760166060.5475] Config: added 'psk' value '<hidden>'
Oct 11 07:01:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/36
Oct 11 07:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:02 IQ138000 NetworkManager[403]: <info>  [1760166062.6325] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:01:02 IQ138000 NetworkManager[403]: <info>  [1760166062.6327] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:01:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:01:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:01:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:01:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:01:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:01:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:01:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:01:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:01:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:01:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:01:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:01:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:01:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:01:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:01:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:01:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:01:08 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:01:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:01:08 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:01:08 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:01:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:01:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:01:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:01:08 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:01:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:01:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:01:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:01:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:01:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:01:08 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:01:08 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:01:08 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:01:08 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:01:08 IQ138000 wb-watchdog[2147]: [INFO] Interval #45 started. Waiting up to 60 seconds for error...
Oct 11 07:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:01:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:01:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:01:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:26 IQ138000 NetworkManager[403]: <warn>  [1760166086.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:01:26 IQ138000 NetworkManager[403]: <info>  [1760166086.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:01:26 IQ138000 NetworkManager[403]: <warn>  [1760166086.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:01:26 IQ138000 NetworkManager[403]: <info>  [1760166086.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:01:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/36
Oct 11 07:01:26 IQ138000 NetworkManager[403]: <info>  [1760166086.0756] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:01:26 IQ138000 NetworkManager[403]: <info>  [1760166086.0771] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:32 IQ138000 NetworkManager[403]: <info>  [1760166092.2985] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:01:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:01:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:01:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:01:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:01:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:01:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:01:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:01:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:01:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:01:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:01:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:01:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:01:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:01:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:01:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:01:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:01:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:01:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:01:38 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:01:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:01:38 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:01:38 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:01:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:01:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:01:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:01:38 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:01:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:01:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:01:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:01:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:01:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:01:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:01:38 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:01:38 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:01:38 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:01:38 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:01:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:01:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:01:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:01:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:02:08 IQ138000 wb-watchdog[2860]: [INFO] Interval #46 started. Waiting up to 60 seconds for error...
Oct 11 07:02:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:02:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:02:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:02:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:02:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:02:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:02:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:02:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:02:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:02:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:02:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:02:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:02:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:02:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:02:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:02:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:02:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:02:08 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:02:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:02:08 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:02:08 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:02:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:02:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:02:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:02:08 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:02:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:02:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:02:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:02:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:02:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:02:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:02:08 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:02:08 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:02:08 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:02:08 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:02:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5128] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5132] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5141] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5193] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5216] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5218] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5304] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5336] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5359] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5362] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5363] Config: added 'scan_ssid' value '1'
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5364] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5365] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.5366] Config: added 'psk' value '<hidden>'
Oct 11 07:02:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/37
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.6105] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:02:27 IQ138000 NetworkManager[403]: <info>  [1760166147.6108] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:02:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:02:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:02:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:02:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:02:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:02:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:02:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:02:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:02:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:02:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:02:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:02:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:02:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:02:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:02:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:02:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:02:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:02:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:02:39 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:02:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:02:39 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:02:39 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:02:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:02:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:02:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:02:39 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:02:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:02:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:02:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:02:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:02:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:02:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:02:39 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:02:39 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:02:39 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:02:39 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:53 IQ138000 NetworkManager[403]: <warn>  [1760166173.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:02:53 IQ138000 NetworkManager[403]: <info>  [1760166173.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:02:53 IQ138000 NetworkManager[403]: <warn>  [1760166173.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:02:53 IQ138000 NetworkManager[403]: <info>  [1760166173.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:02:53 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:02:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/37
Oct 11 07:02:53 IQ138000 NetworkManager[403]: <info>  [1760166173.0727] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:02:53 IQ138000 NetworkManager[403]: <info>  [1760166173.0729] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:02:53 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:02:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:02:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:02:59 IQ138000 NetworkManager[403]: <info>  [1760166179.3059] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:03:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:03:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:03:08 IQ138000 wb-watchdog[3504]: [INFO] Interval #47 started. Waiting up to 60 seconds for error...
Oct 11 07:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:03:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:03:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:03:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:03:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:03:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:03:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:03:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:03:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:03:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:03:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:03:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:03:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:03:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:03:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:03:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:03:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:03:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:03:09 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:03:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:03:09 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:03:09 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:03:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:03:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:03:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:03:09 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:03:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:03:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:03:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:03:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:03:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:03:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:03:09 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:03:09 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:03:09 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:03:09 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:03:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:03:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:03:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:03:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:03:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:03:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:03:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:03:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:03:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:03:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:03:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:03:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:03:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:03:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:03:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:03:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:03:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:03:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:03:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:03:39 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:03:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:03:39 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:03:39 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:03:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:03:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:03:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:03:39 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:03:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:03:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:03:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:03:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:03:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:03:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:03:39 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:03:39 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:03:39 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:03:39 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5429] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5443] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5450] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5509] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5527] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5529] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5609] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5645] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5665] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5668] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5669] Config: added 'scan_ssid' value '1'
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5670] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5671] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:03:54 IQ138000 NetworkManager[403]: <info>  [1760166234.5671] Config: added 'psk' value '<hidden>'
Oct 11 07:03:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/38
Oct 11 07:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:03:57 IQ138000 NetworkManager[403]: <info>  [1760166237.6500] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:03:57 IQ138000 NetworkManager[403]: <info>  [1760166237.6502] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:04:08 IQ138000 wb-watchdog[4230]: [INFO] Interval #48 started. Waiting up to 60 seconds for error...
Oct 11 07:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:04:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:04:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:04:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:04:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:04:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:04:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:04:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:04:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:04:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:04:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:04:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:04:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:04:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:04:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:04:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:04:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:04:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:04:09 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:04:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:04:09 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:04:09 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:04:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:04:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:04:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:04:09 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:04:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:04:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:04:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:04:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:04:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:04:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:04:09 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:04:09 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:04:09 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:04:09 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:04:20 IQ138000 NetworkManager[403]: <warn>  [1760166260.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:04:20 IQ138000 NetworkManager[403]: <info>  [1760166260.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:04:20 IQ138000 NetworkManager[403]: <warn>  [1760166260.0263] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:04:20 IQ138000 NetworkManager[403]: <info>  [1760166260.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:04:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/38
Oct 11 07:04:20 IQ138000 NetworkManager[403]: <info>  [1760166260.0694] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:04:20 IQ138000 NetworkManager[403]: <info>  [1760166260.0696] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:26 IQ138000 NetworkManager[403]: <info>  [1760166266.2900] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:04:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:04:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:04:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:04:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:04:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:04:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:04:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:04:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:04:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:04:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:04:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:04:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:04:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:04:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:04:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:04:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:04:39 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:04:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:04:39 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:04:39 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:04:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:04:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:04:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:04:39 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:04:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:04:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:04:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:04:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:04:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:04:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:04:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:04:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:04:40 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:04:40 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:04:40 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:04:40 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:04:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:04:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:01 IQ138000 CRON[4792]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:05:01 IQ138000 CRON[4802]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 07:05:01 IQ138000 CRON[4792]: pam_unix(cron:session): session closed for user root
Oct 11 07:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:05:08 IQ138000 wb-watchdog[4864]: [INFO] Interval #49 started. Waiting up to 60 seconds for error...
Oct 11 07:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:05:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:05:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:05:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:05:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:05:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:05:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:05:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:05:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:05:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:05:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:05:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:05:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:05:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:05:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:05:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:05:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:05:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:05:10 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:05:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:05:10 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:05:10 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:05:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:05:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:05:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:05:10 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:05:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:05:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:05:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:05:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:05:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:05:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:05:10 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:05:10 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:05:10 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:05:10 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:05:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:05:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5308] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5313] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5318] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5387] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5419] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5421] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5563] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5583] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5618] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5622] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5623] Config: added 'scan_ssid' value '1'
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5624] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5625] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:05:21 IQ138000 NetworkManager[403]: <info>  [1760166321.5626] Config: added 'psk' value '<hidden>'
Oct 11 07:05:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/39
Oct 11 07:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:24 IQ138000 NetworkManager[403]: <info>  [1760166324.6412] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:05:24 IQ138000 NetworkManager[403]: <info>  [1760166324.6437] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:05:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:05:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:05:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:05:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:05:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:05:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:05:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:05:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:05:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:05:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:05:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:05:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:05:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:05:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:05:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:05:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:05:40 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:05:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:05:40 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:05:40 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:05:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:05:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:05:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:05:40 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:05:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:05:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:05:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:05:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:05:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:05:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:05:40 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:05:40 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:05:40 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:05:40 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:05:47 IQ138000 NetworkManager[403]: <warn>  [1760166347.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:05:47 IQ138000 NetworkManager[403]: <info>  [1760166347.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:05:47 IQ138000 NetworkManager[403]: <warn>  [1760166347.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:05:47 IQ138000 NetworkManager[403]: <info>  [1760166347.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:05:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/39
Oct 11 07:05:47 IQ138000 NetworkManager[403]: <info>  [1760166347.0664] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:05:47 IQ138000 NetworkManager[403]: <info>  [1760166347.0666] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:05:53 IQ138000 NetworkManager[403]: <info>  [1760166353.2990] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:08 IQ138000 wb-watchdog[5591]: [INFO] Interval #50 started. Waiting up to 60 seconds for error...
Oct 11 07:06:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:06:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:06:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:06:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:06:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:06:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:06:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:06:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:06:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:06:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:06:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:06:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:06:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:06:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:06:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:06:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:06:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:06:10 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:06:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:06:10 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:06:10 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:06:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:06:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:06:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:06:10 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:06:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:06:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:06:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:06:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:06:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:06:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:06:10 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:06:10 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:06:10 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:06:10 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:06:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:06:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:06:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:06:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:37 IQ138000 npm[3801]: [2025-10-11 07:06:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.34,"last_seen":1760166397228,"linkquality":40,"power_outage_count":35250,"temperature":23.04,"voltage":3075}'
Oct 11 07:06:37 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 07:06:37 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 07:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:06:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:06:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:06:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:06:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:06:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:06:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:06:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:06:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:06:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:06:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:06:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:06:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:06:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:06:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:06:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:06:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:06:40 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:06:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:06:40 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:06:40 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:06:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:06:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:06:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:06:40 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:06:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:06:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:06:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:06:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:06:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:06:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:06:40 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:06:40 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:06:40 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:06:40 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5322] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5352] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5360] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5433] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5472] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5474] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5619] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5660] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5687] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5691] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5692] Config: added 'scan_ssid' value '1'
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5693] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5694] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.5695] Config: added 'psk' value '<hidden>'
Oct 11 07:06:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/40
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.6423] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:06:48 IQ138000 NetworkManager[403]: <info>  [1760166408.6425] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:07:08 IQ138000 wb-watchdog[6218]: [INFO] Interval #51 started. Waiting up to 60 seconds for error...
Oct 11 07:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:07:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:07:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:07:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:07:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:07:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:07:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:07:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:07:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:07:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:07:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:07:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:07:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:07:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:07:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:07:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:07:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:07:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:07:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:07:10 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:07:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:07:10 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:07:10 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:07:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:07:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:07:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:07:10 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:07:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:07:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:07:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:07:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:07:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:07:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:07:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:07:11 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:07:11 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:07:11 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:07:11 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:14 IQ138000 NetworkManager[403]: <warn>  [1760166434.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:07:14 IQ138000 NetworkManager[403]: <info>  [1760166434.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:07:14 IQ138000 NetworkManager[403]: <warn>  [1760166434.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:07:14 IQ138000 NetworkManager[403]: <info>  [1760166434.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:07:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:07:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/40
Oct 11 07:07:14 IQ138000 NetworkManager[403]: <info>  [1760166434.0692] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:07:14 IQ138000 NetworkManager[403]: <info>  [1760166434.0695] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:07:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:07:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:20 IQ138000 NetworkManager[403]: <info>  [1760166440.3060] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 07:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:07:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L1, row count 7183, limit 7042
Oct 11 07:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:07:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:07:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:07:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:07:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:07:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:07:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:07:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:07:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:07:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:07:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:07:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:07:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:07:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:07:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:07:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:07:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:07:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:07:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:07:41 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:07:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:07:41 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:07:41 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:07:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:07:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:07:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:07:41 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:07:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:07:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:07:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:07:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:07:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:07:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:07:41 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:07:41 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:07:41 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:07:41 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:01 IQ138000 CRON[6875]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:08:01 IQ138000 CRON[6879]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 07:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:08:02 IQ138000 sSMTP[6898]: Unable to locate mail
Oct 11 07:08:02 IQ138000 cron[6898]: sendmail: Cannot open mail:25
Oct 11 07:08:02 IQ138000 sSMTP[6898]: Cannot open mail:25
Oct 11 07:08:02 IQ138000 CRON[6875]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 07:08:02 IQ138000 CRON[6875]: pam_unix(cron:session): session closed for user root
Oct 11 07:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:08 IQ138000 wb-watchdog[6944]: [INFO] Interval #52 started. Waiting up to 60 seconds for error...
Oct 11 07:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:08:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:08:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:08:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:08:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:08:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:08:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:08:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:08:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:08:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:08:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:08:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:08:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:08:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:08:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:08:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:08:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:08:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:08:11 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:08:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:08:11 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:08:11 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:08:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:08:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:08:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:08:11 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:08:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:08:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:08:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:08:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:08:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:08:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:08:11 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:08:11 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:08:11 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:08:11 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8227] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8232] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8238] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8324] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8343] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8350] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8508] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8525] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8540] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8543] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8544] Config: added 'scan_ssid' value '1'
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8545] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8546] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:08:15 IQ138000 NetworkManager[403]: <info>  [1760166495.8547] Config: added 'psk' value '<hidden>'
Oct 11 07:08:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/41
Oct 11 07:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:08:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:08:18 IQ138000 NetworkManager[403]: <info>  [1760166498.9426] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:08:18 IQ138000 NetworkManager[403]: <info>  [1760166498.9428] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:08:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:41 IQ138000 NetworkManager[403]: <warn>  [1760166521.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:08:41 IQ138000 NetworkManager[403]: <info>  [1760166521.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:08:41 IQ138000 NetworkManager[403]: <warn>  [1760166521.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:08:41 IQ138000 NetworkManager[403]: <info>  [1760166521.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:08:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/41
Oct 11 07:08:41 IQ138000 NetworkManager[403]: <info>  [1760166521.0640] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:08:41 IQ138000 NetworkManager[403]: <info>  [1760166521.0642] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:08:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:08:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:08:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:08:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:08:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:08:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:08:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:08:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:08:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:08:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:08:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:08:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:08:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:08:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:08:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:08:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:08:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:08:41 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:08:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:08:41 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:08:41 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:08:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:08:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:08:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:08:41 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:08:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:08:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:08:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:08:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:08:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:08:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:08:41 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:08:41 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:08:41 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:08:41 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:47 IQ138000 NetworkManager[403]: <info>  [1760166527.6160] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:08:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:08:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:09:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:09:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:09 IQ138000 wb-watchdog[7566]: [INFO] Interval #53 started. Waiting up to 60 seconds for error...
Oct 11 07:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:09:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:09:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:09:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:09:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:09:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:09:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:09:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:09:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:09:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:09:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:09:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:09:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:09:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:09:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:09:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:09:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:09:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:09:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:09:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:09:11 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:09:11 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:09:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:09:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:09:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:09:11 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:09:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:09:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:09:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:09:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:09:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:09:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:09:11 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:09:11 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:09:11 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:09:11 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:09:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:09:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:09:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L3, row count 7183, limit 7042
Oct 11 07:09:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:09:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:09:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:09:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:09:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:09:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:09:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:09:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:09:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:09:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:09:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:09:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:09:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:09:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:09:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:09:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:09:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:09:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:09:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:09:41 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:09:41 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:09:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:09:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:09:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:09:41 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:09:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:09:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:09:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:09:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:09:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:09:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:09:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:09:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:09:42 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:09:42 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:09:42 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:09:42 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8059] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8070] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8078] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8132] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8151] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8153] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8274] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8296] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8317] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8321] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8322] Config: added 'scan_ssid' value '1'
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8323] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8324] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.8325] Config: added 'psk' value '<hidden>'
Oct 11 07:09:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/42
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.9057] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:09:42 IQ138000 NetworkManager[403]: <info>  [1760166582.9059] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:08 IQ138000 NetworkManager[403]: <warn>  [1760166608.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:10:08 IQ138000 NetworkManager[403]: <info>  [1760166608.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:10:08 IQ138000 NetworkManager[403]: <warn>  [1760166608.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:10:08 IQ138000 NetworkManager[403]: <info>  [1760166608.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/42
Oct 11 07:10:08 IQ138000 NetworkManager[403]: <info>  [1760166608.0723] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:10:08 IQ138000 NetworkManager[403]: <info>  [1760166608.0725] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:09 IQ138000 wb-watchdog[8268]: [INFO] Interval #54 started. Waiting up to 60 seconds for error...
Oct 11 07:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:10:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:10:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:10:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:10:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:10:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:10:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:10:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:10:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:10:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:10:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:10:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:10:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:10:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:10:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:10:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:10:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:10:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:10:12 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:10:12 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:10:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:10:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:10:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:10:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:10:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:10:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:10:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:10:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:10:12 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:10:12 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:10:12 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:10:12 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-11 10:10:14.008+00:00
Oct 11 07:10:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 07:10:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-11T10:10:14.008Z","to":"2025-10-11T22:05:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 11 07:10:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760166794019,"cmd_timestamp_ms":1760166614019,"source":"schedule"}
Oct 11 07:10:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760166794019,"cmd_timestamp_ms":1760166614019,"source":"schedule"}
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:10:14 IQ138000 NetworkManager[403]: <info>  [1760166614.5615] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:10:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:10:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:10:29 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Command: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760166809025,"cmd_timestamp_ms":1760166629025,"source":"regulation"}
Oct 11 07:10:29 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760166809025,"cmd_timestamp_ms":1760166629025,"source":"regulation"}
Oct 11 07:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 07:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:10:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:10:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:10:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:10:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:10:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:10:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:10:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:10:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:10:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:10:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:10:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:10:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:10:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:10:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:10:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:10:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:10:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:10:42 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:10:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:10:42 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:10:42 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:10:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:10:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:10:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:10:42 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:10:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:10:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:10:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:10:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:10:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:10:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:10:42 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:10:42 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:10:42 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:10:42 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:10:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Frequency, row count 7183, limit 7042
Oct 11 07:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:11:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:11:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:09 IQ138000 wb-watchdog[8896]: [INFO] Interval #55 started. Waiting up to 60 seconds for error...
Oct 11 07:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8566] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8571] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8578] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8638] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8662] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8664] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8768] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8790] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8810] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8815] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8816] Config: added 'scan_ssid' value '1'
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8817] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8819] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.8820] Config: added 'psk' value '<hidden>'
Oct 11 07:11:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/43
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.9492] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:11:09 IQ138000 NetworkManager[403]: <info>  [1760166669.9495] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:11:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:11:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:11:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:11:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:11:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:11:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:11:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:11:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:11:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:11:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:11:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:11:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:11:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:11:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:11:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:11:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:11:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:11:12 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:11:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:11:12 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:11:12 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:11:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:11:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:11:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:11:12 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:11:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:11:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:11:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:11:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:11:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:11:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:11:12 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:11:12 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:11:12 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:11:12 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:11:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:11:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:35 IQ138000 NetworkManager[403]: <warn>  [1760166695.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:11:35 IQ138000 NetworkManager[403]: <info>  [1760166695.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:11:35 IQ138000 NetworkManager[403]: <warn>  [1760166695.0238] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:11:35 IQ138000 NetworkManager[403]: <info>  [1760166695.0252] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:11:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/43
Oct 11 07:11:35 IQ138000 NetworkManager[403]: <info>  [1760166695.0712] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:11:35 IQ138000 NetworkManager[403]: <info>  [1760166695.0714] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:11:41 IQ138000 NetworkManager[403]: <info>  [1760166701.6299] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:11:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:11:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:11:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:11:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:11:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:11:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:11:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:11:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:11:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:11:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:11:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:11:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:11:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:11:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:11:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:11:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:11:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:11:42 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:11:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:11:42 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:11:42 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:11:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:11:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:11:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:11:42 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:11:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:11:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:11:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:11:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:11:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:11:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:11:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:11:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:11:43 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:11:43 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:11:43 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:11:43 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:11:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:11:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:12:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:12:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:09 IQ138000 wb-watchdog[9589]: [INFO] Interval #56 started. Waiting up to 60 seconds for error...
Oct 11 07:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:12:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:12:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:12:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:12:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:12:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:12:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:12:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:12:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:12:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:12:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:12:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:12:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:12:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:12:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:12:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:12:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:12:13 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:12:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:12:13 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:12:13 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:12:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:12:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:12:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:12:13 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:12:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:12:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:12:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:12:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:12:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:12:13 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:12:13 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:12:13 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:12:13 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:12:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:12:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9208] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9214] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9220] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9290] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9348] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9356] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9517] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9535] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9553] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9560] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9561] Config: added 'scan_ssid' value '1'
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9562] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9563] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:12:36 IQ138000 NetworkManager[403]: <info>  [1760166756.9564] Config: added 'psk' value '<hidden>'
Oct 11 07:12:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/44
Oct 11 07:12:37 IQ138000 NetworkManager[403]: <info>  [1760166757.0225] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:12:37 IQ138000 NetworkManager[403]: <info>  [1760166757.0239] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:12:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:12:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:12:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:12:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:12:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:12:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:12:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:12:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:12:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:12:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:12:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:12:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:12:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:12:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:12:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:12:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:12:43 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:12:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:12:43 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:12:43 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:12:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:12:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:12:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:12:43 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:12:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:12:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:12:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:12:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:12:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:12:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:12:43 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:12:43 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:12:43 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:12:43 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:13:02 IQ138000 NetworkManager[403]: <warn>  [1760166782.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:13:02 IQ138000 NetworkManager[403]: <info>  [1760166782.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:13:02 IQ138000 NetworkManager[403]: <warn>  [1760166782.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:13:02 IQ138000 NetworkManager[403]: <info>  [1760166782.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:13:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/44
Oct 11 07:13:02 IQ138000 NetworkManager[403]: <info>  [1760166782.0674] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:13:02 IQ138000 NetworkManager[403]: <info>  [1760166782.0676] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:07 IQ138000 NetworkManager[403]: <info>  [1760166787.6926] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:09 IQ138000 wb-watchdog[10218]: [INFO] Interval #57 started. Waiting up to 60 seconds for error...
Oct 11 07:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:13:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:13:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:13:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:13:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:13:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:13:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:13:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:13:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:13:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:13:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:13:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:13:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:13:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:13:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:13:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:13:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:13:13 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:13:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:13:13 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:13:13 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:13:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:13:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:13:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:13:13 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:13:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:13:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:13:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:13:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:13:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:13:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:13:13 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:13:13 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:13:13 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:13:13 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:13:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:13:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:13:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:13:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:13:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L2, row count 7183, limit 7042
Oct 11 07:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:13:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:13:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:13:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:13:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:13:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:13:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:13:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:13:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:13:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:13:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:13:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:13:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:13:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:13:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:13:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:13:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:13:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:13:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:13:43 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:13:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:13:43 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:13:43 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:13:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:13:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:13:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:13:43 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:13:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:13:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:13:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:13:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:13:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:13:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:13:43 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:13:43 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:13:43 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:13:43 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:13:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:13:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.0818] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.0823] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.0829] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.0897] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.0918] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.0920] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1027] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1052] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1088] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1092] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1093] Config: added 'scan_ssid' value '1'
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1094] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1096] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1097] Config: added 'psk' value '<hidden>'
Oct 11 07:14:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/45
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1827] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:14:03 IQ138000 NetworkManager[403]: <info>  [1760166843.1829] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:06 IQ138000 npm[3801]: [2025-10-11 07:14:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.88,"last_seen":1760166846538,"linkquality":94,"power_outage_count":48745,"temperature":25.35,"voltage":3025}'
Oct 11 07:14:06 IQ138000 npm[3801]: [2025-10-11 07:14:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.04,"last_seen":1760166846559,"linkquality":98,"power_outage_count":48745,"temperature":25.35,"voltage":3025}'
Oct 11 07:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:09 IQ138000 wb-watchdog[10925]: [INFO] Interval #58 started. Waiting up to 60 seconds for error...
Oct 11 07:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:14:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:14:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:14:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:14:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:14:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:14:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:14:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:14:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:14:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:14:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:14:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:14:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:14:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:14:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:14:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:14:13 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:14:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:14:13 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:14:13 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:14:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:14:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:14:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:14:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:14:14 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:14:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:14:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:14:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:14:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:14:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:14:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:14:14 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:14:14 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:14:14 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:14:14 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 07:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 4351 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 07:14:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 07:14:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 07:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:28 IQ138000 NetworkManager[403]: <warn>  [1760166868.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:14:28 IQ138000 NetworkManager[403]: <info>  [1760166868.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:14:28 IQ138000 NetworkManager[403]: <warn>  [1760166868.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:14:28 IQ138000 NetworkManager[403]: <info>  [1760166868.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:14:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/45
Oct 11 07:14:28 IQ138000 NetworkManager[403]: <info>  [1760166868.0681] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:14:28 IQ138000 NetworkManager[403]: <info>  [1760166868.0683] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:33 IQ138000 NetworkManager[403]: <info>  [1760166873.8275] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:14:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:14:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:14:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:14:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:14:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:14:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:14:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:14:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:14:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:14:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:14:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:14:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:14:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:14:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:14:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:14:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:14:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:14:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:14:44 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:14:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:14:44 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:14:44 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:14:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:14:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:14:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:14:44 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:14:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:14:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:14:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:14:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:14:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:14:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:14:44 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:14:44 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:14:44 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:14:44 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:14:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:14:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:01 IQ138000 CRON[11453]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:15:01 IQ138000 CRON[11457]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 07:15:01 IQ138000 CRON[11453]: pam_unix(cron:session): session closed for user root
Oct 11 07:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:09 IQ138000 wb-watchdog[11530]: [INFO] Interval #59 started. Waiting up to 60 seconds for error...
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:15:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:15:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:15:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:15:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:15:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:15:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:15:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:15:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:15:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:15:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:15:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:15:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:15:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:15:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:15:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:15:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:15:14 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:15:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:15:14 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:15:14 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:15:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:15:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:15:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:15:14 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:15:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:15:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:15:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:15:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:15:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:15:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:15:14 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:15:14 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:15:14 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:15:14 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8732 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:15:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:15:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2677] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2681] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2687] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2776] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2800] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2802] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2895] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2922] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2939] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2943] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2944] Config: added 'scan_ssid' value '1'
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2945] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2946] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.2947] Config: added 'psk' value '<hidden>'
Oct 11 07:15:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/46
Oct 11 07:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.3677] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:15:29 IQ138000 NetworkManager[403]: <info>  [1760166929.3679] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:15:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:15:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:15:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:15:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:15:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:15:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:15:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:15:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:15:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:15:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:15:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:15:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:15:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:15:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:15:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:15:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:15:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:15:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:15:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:15:44 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:15:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:15:44 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:15:44 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:15:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:15:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:15:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:15:44 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:15:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:15:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:15:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:15:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:15:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:15:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:15:44 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:15:44 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:15:44 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:15:44 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:55 IQ138000 NetworkManager[403]: <warn>  [1760166955.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:15:55 IQ138000 NetworkManager[403]: <info>  [1760166955.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:15:55 IQ138000 NetworkManager[403]: <warn>  [1760166955.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:15:55 IQ138000 NetworkManager[403]: <info>  [1760166955.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:15:55 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:15:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/46
Oct 11 07:15:55 IQ138000 NetworkManager[403]: <info>  [1760166955.0693] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:15:55 IQ138000 NetworkManager[403]: <info>  [1760166955.0695] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:15:55 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:16:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:16:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:16:01 IQ138000 NetworkManager[403]: <info>  [1760166961.0600] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:09 IQ138000 wb-watchdog[12245]: [INFO] Interval #60 started. Waiting up to 60 seconds for error...
Oct 11 07:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:16:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:16:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:16:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:16:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:16:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:16:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:16:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:16:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:16:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:16:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:16:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:16:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:16:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:16:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:16:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:16:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:16:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:16:14 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:16:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:16:14 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:16:14 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:16:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:16:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:16:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:16:14 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:16:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:16:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:16:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:16:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:16:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:16:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:16:14 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:16:14 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:16:14 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:16:14 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:16:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:16:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:16:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:16:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:16:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:16:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:16:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:16:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:16:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:16:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:16:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:16:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:16:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:16:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:16:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:16:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:16:44 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:16:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:16:44 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:16:44 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:16:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:16:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:16:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:16:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:16:45 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:16:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:16:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:16:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:16:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:16:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:16:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:16:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:16:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:16:45 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:16:45 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:16:45 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:16:45 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6761] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6766] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6786] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6870] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6890] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6891] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.6988] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7021] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7039] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7042] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7043] Config: added 'scan_ssid' value '1'
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7044] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7045] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:16:56 IQ138000 NetworkManager[403]: <info>  [1760167016.7046] Config: added 'psk' value '<hidden>'
Oct 11 07:16:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/47
Oct 11 07:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:16:58 IQ138000 NetworkManager[403]: <info>  [1760167018.7895] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:16:58 IQ138000 NetworkManager[403]: <info>  [1760167018.7898] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:01 IQ138000 CRON[12770]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:17:01 IQ138000 CRON[12774]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 07:17:01 IQ138000 CRON[12770]: pam_unix(cron:session): session closed for user root
Oct 11 07:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:09 IQ138000 wb-watchdog[12843]: [INFO] Interval #61 started. Waiting up to 60 seconds for error...
Oct 11 07:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:17:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:17:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:17:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:17:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:17:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:17:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:17:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:17:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:17:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:17:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:17:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:17:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:17:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:17:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:17:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:17:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:17:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:17:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:17:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:17:15 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:17:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:17:15 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:17:15 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:17:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:17:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:17:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:17:15 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:17:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:17:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:17:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:17:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:17:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:17:15 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:17:15 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:17:15 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:17:15 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:17:22 IQ138000 NetworkManager[403]: <warn>  [1760167042.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:17:22 IQ138000 NetworkManager[403]: <info>  [1760167042.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:17:22 IQ138000 NetworkManager[403]: <warn>  [1760167042.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:17:22 IQ138000 NetworkManager[403]: <info>  [1760167042.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:17:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/47
Oct 11 07:17:22 IQ138000 NetworkManager[403]: <info>  [1760167042.0715] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:17:22 IQ138000 NetworkManager[403]: <info>  [1760167042.0717] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:28 IQ138000 NetworkManager[403]: <info>  [1760167048.4568] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:17:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:17:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:17:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:17:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:17:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:17:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:17:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:17:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:17:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:17:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:17:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:17:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:17:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:17:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:17:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:17:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:17:45 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:17:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:17:45 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:17:45 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:17:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:17:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:17:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:17:45 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:17:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:17:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:17:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:17:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:17:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:17:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:17:45 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:17:45 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:17:45 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:17:45 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:17:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:17:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:17:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:17:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:18:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:18:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:09 IQ138000 wb-watchdog[13571]: [INFO] Interval #62 started. Waiting up to 60 seconds for error...
Oct 11 07:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:18:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:18:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:18:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:18:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:18:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:18:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:18:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:18:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:18:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:18:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:18:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:18:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:18:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:18:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:18:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:18:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:18:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:18:15 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:18:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:18:15 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:18:15 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:18:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:18:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:18:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:18:15 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:18:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:18:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:18:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:18:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:18:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:18:15 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:18:15 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:18:15 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:18:15 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:18:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:21 IQ138000 npm[3801]: [2025-10-11 07:18:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.29,"last_seen":1760167101885,"linkquality":51,"power_outage_count":25795,"pressure":993.7,"temperature":20.36,"voltage":2995}'
Oct 11 07:18:21 IQ138000 npm[3801]: [2025-10-11 07:18:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.89,"last_seen":1760167101915,"linkquality":58,"power_outage_count":25795,"pressure":993.7,"temperature":20.36,"voltage":2995}'
Oct 11 07:18:21 IQ138000 npm[3801]: [2025-10-11 07:18:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.89,"last_seen":1760167101956,"linkquality":54,"power_outage_count":25795,"pressure":993.5,"temperature":20.36,"voltage":2995}'
Oct 11 07:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7556] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7561] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7567] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7625] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7645] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7647] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7740] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7760] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7776] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7779] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7780] Config: added 'scan_ssid' value '1'
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7780] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7781] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.7782] Config: added 'psk' value '<hidden>'
Oct 11 07:18:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/48
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.8630] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:18:23 IQ138000 NetworkManager[403]: <info>  [1760167103.8643] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:18:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:18:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:18:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:18:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:18:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:18:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:18:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:18:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:18:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:18:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:18:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:18:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:18:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:18:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:18:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:18:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:18:45 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:18:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:18:45 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:18:45 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:18:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:18:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:18:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:18:45 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:18:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:18:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:18:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:18:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:18:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:18:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:18:45 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:18:45 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:18:45 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:18:45 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:18:46 IQ138000 ntpd[1651]: 162.159.200.123 local addr 10.37.94.94 -> <null>
Oct 11 07:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:49 IQ138000 NetworkManager[403]: <warn>  [1760167129.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:18:49 IQ138000 NetworkManager[403]: <info>  [1760167129.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:18:49 IQ138000 NetworkManager[403]: <warn>  [1760167129.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:18:49 IQ138000 NetworkManager[403]: <info>  [1760167129.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:18:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/48
Oct 11 07:18:49 IQ138000 NetworkManager[403]: <info>  [1760167129.0706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:18:49 IQ138000 NetworkManager[403]: <info>  [1760167129.0708] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:55 IQ138000 NetworkManager[403]: <info>  [1760167135.5214] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:18:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:18:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:09 IQ138000 wb-watchdog[14187]: [INFO] Interval #63 started. Waiting up to 60 seconds for error...
Oct 11 07:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:19:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:19:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:19:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:19:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:19:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:19:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:19:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:19:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:19:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:19:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:19:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:19:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:19:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:19:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:19:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:19:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:19:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:19:16 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:19:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:19:16 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:19:16 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:19:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:19:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:19:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:19:16 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:19:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:19:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:19:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:19:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:19:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:19:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:19:16 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:19:16 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:19:16 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:19:16 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:19:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:19:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:19:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:19:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:19:32 IQ138000 npm[3801]: [2025-10-11 07:19:32] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.89,"last_seen":1760167172967,"linkquality":58,"power_outage_count":25795,"pressure":993.5,"temperature":20.36,"voltage":2995}'
Oct 11 07:19:33 IQ138000 npm[3801]: [2025-10-11 07:19:33] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.92,"last_seen":1760167173020,"linkquality":58,"power_outage_count":25795,"pressure":993.5,"temperature":20.36,"voltage":2995}'
Oct 11 07:19:33 IQ138000 npm[3801]: [2025-10-11 07:19:33] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.92,"last_seen":1760167173020,"linkquality":58,"power_outage_count":25795,"pressure":993.8,"temperature":20.36,"voltage":2995}'
Oct 11 07:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:19:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:19:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:19:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:19:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:19:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:19:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:19:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:19:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:19:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:19:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:19:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:19:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:19:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:19:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:19:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:19:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:19:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:19:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:19:46 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:19:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:19:46 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:19:46 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:19:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:19:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:19:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:19:46 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:19:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:19:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:19:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:19:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:19:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:19:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:19:46 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:19:46 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:19:46 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:19:46 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9605] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9610] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9617] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9713] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9751] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9766] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9862] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9881] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9905] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9908] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9909] Config: added 'scan_ssid' value '1'
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9910] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9912] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:19:50 IQ138000 NetworkManager[403]: <info>  [1760167190.9913] Config: added 'psk' value '<hidden>'
Oct 11 07:19:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/49
Oct 11 07:19:51 IQ138000 NetworkManager[403]: <info>  [1760167191.0716] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:19:51 IQ138000 NetworkManager[403]: <info>  [1760167191.0731] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:19:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:09 IQ138000 wb-watchdog[14876]: [INFO] Interval #64 started. Waiting up to 60 seconds for error...
Oct 11 07:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-11 10:20:14.009+00:00
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-11T10:20:14.009Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":1}}
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760167394021,"cmd_timestamp_ms":1760167214021,"source":"schedule"}
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760167394021,"cmd_timestamp_ms":1760167214021,"source":"schedule"}
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-11 10:20:14.031+00:00
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-11T10:20:14.031Z","to":"2025-10-11T23:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":2,"i":1}}
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760167394039,"cmd_timestamp_ms":1760167214039,"source":"schedule"}
Oct 11 07:20:14 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760167394039,"cmd_timestamp_ms":1760167214039,"source":"schedule"}
Oct 11 07:20:15 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 07:20:15 IQ138000 wb-rules[6102]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 07:20:16 IQ138000 NetworkManager[403]: <warn>  [1760167216.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:20:16 IQ138000 NetworkManager[403]: <info>  [1760167216.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:20:16 IQ138000 NetworkManager[403]: <warn>  [1760167216.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:20:16 IQ138000 NetworkManager[403]: <info>  [1760167216.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:20:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/49
Oct 11 07:20:16 IQ138000 NetworkManager[403]: <info>  [1760167216.0657] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:20:16 IQ138000 NetworkManager[403]: <info>  [1760167216.0658] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:20:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:20:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:20:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:20:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:20:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:20:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:20:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:20:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:20:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:20:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:20:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:20:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:20:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:20:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:20:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:20:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:20:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:20:16 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:20:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:20:16 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:20:16 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:20:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:20:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:20:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:20:16 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:20:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:20:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:20:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:20:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:20:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:20:16 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:20:16 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:20:16 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:20:16 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:20:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:20:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:21 IQ138000 NetworkManager[403]: <info>  [1760167221.8056] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:28 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:20:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:20:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:20:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:20:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:20:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:20:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:20:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:20:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:20:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:20:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:20:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:20:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:20:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:20:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:20:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:20:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:20:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:20:46 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:20:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:20:46 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:20:46 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:20:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:20:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:20:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:20:46 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:20:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:20:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:20:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:20:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:20:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:20:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:20:46 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:20:46 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:20:46 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:20:46 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:20:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:20:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L2, row count 7183, limit 7042
Oct 11 07:20:57 IQ138000 ntpd[1651]: 85.142.100.8 local addr 10.37.94.94 -> <null>
Oct 11 07:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:10 IQ138000 wb-watchdog[15511]: [INFO] Interval #65 started. Waiting up to 60 seconds for error...
Oct 11 07:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:21:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:21:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:21:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:21:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:21:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:21:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:21:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:21:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:21:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:21:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:21:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:21:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:21:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:21:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:21:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:21:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:21:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:21:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:21:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:21:16 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:21:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:21:16 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:21:16 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:21:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:21:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:21:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:21:16 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:21:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:21:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:21:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:21:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:21:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:21:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:21:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:21:17 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:21:17 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:21:17 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:21:17 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.1831] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.1837] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.1843] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.1894] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.1912] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.1914] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2003] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2028] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2049] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2053] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2054] Config: added 'scan_ssid' value '1'
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2055] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2056] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2057] Config: added 'psk' value '<hidden>'
Oct 11 07:21:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/50
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2781] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:21:17 IQ138000 NetworkManager[403]: <info>  [1760167277.2783] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:21:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:21:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:42 IQ138000 NetworkManager[403]: <warn>  [1760167302.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:21:42 IQ138000 NetworkManager[403]: <info>  [1760167302.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:21:42 IQ138000 NetworkManager[403]: <warn>  [1760167302.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:21:42 IQ138000 NetworkManager[403]: <info>  [1760167302.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:21:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/50
Oct 11 07:21:42 IQ138000 NetworkManager[403]: <info>  [1760167302.0726] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:21:42 IQ138000 NetworkManager[403]: <info>  [1760167302.0727] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:21:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:21:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:21:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:21:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:21:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:21:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:21:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:21:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:21:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:21:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:21:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:21:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:21:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:21:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:21:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:21:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:21:47 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:21:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:21:47 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:21:47 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:21:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:21:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:21:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:21:47 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:21:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:21:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:21:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:21:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:21:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:21:47 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:21:47 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:21:47 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:21:47 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:47 IQ138000 NetworkManager[403]: <info>  [1760167307.9406] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:21:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:21:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:09 IQ138000 wb-watchdog[16201]: [INFO] Interval #66 started. Waiting up to 60 seconds for error...
Oct 11 07:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:22:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:22:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:22:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:22:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:22:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:22:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:22:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:22:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:22:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:22:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:22:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:22:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:22:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:22:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:22:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:22:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:22:17 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:22:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:22:17 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:22:17 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:22:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:22:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:22:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:22:17 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:22:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:22:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:22:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:22:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:22:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:22:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:22:17 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:22:17 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:22:17 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:22:17 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2196] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2202] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2208] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2327] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2346] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2348] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2443] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2462] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2481] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2484] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2485] Config: added 'scan_ssid' value '1'
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2486] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2487] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.2488] Config: added 'psk' value '<hidden>'
Oct 11 07:22:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/51
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.3209] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:22:43 IQ138000 NetworkManager[403]: <info>  [1760167363.3211] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:22:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:22:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:22:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:22:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:22:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:22:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:22:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:22:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:22:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:22:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:22:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:22:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:22:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:22:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:22:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:22:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:22:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:22:47 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:22:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:22:47 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:22:47 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:22:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:22:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:22:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:22:47 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:22:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:22:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:22:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:22:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:22:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:22:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:22:47 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:22:47 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:22:47 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:22:47 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:08 IQ138000 NetworkManager[403]: <warn>  [1760167388.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:23:08 IQ138000 NetworkManager[403]: <info>  [1760167388.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:23:08 IQ138000 NetworkManager[403]: <warn>  [1760167388.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:23:08 IQ138000 NetworkManager[403]: <info>  [1760167388.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:23:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/51
Oct 11 07:23:08 IQ138000 NetworkManager[403]: <info>  [1760167388.0705] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:23:08 IQ138000 NetworkManager[403]: <info>  [1760167388.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:23:08 IQ138000 ntpd[1651]: 109.111.178.39 local addr 10.37.94.94 -> <null>
Oct 11 07:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:09 IQ138000 wb-watchdog[16818]: [INFO] Interval #67 started. Waiting up to 60 seconds for error...
Oct 11 07:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:23:14 IQ138000 NetworkManager[403]: <info>  [1760167394.0256] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:23:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:23:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:23:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:23:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:23:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:23:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:23:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:23:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:23:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:23:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:23:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:23:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:23:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:23:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:23:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:23:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:23:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:23:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:23:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:23:17 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:23:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:23:17 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:23:17 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:23:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:23:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:23:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:23:17 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:23:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:23:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:23:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:23:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:23:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:23:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:23:17 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:23:17 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:23:17 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:23:17 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:23:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:23:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:23:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:23:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:23:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:23:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:23:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:23:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:23:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:23:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:23:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:23:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:23:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:23:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:23:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:23:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:23:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:23:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:23:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:23:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:23:47 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:23:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:23:47 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:23:47 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:23:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:23:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:23:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:23:47 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:23:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:23:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:23:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:23:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:23:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:23:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:23:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:23:48 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:23:48 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:23:48 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:23:48 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.3933] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.3938] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.3944] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4004] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4037] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4039] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4164] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4204] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4222] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4225] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4226] Config: added 'scan_ssid' value '1'
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4227] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4228] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4229] Config: added 'psk' value '<hidden>'
Oct 11 07:24:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/52
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4920] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:24:09 IQ138000 NetworkManager[403]: <info>  [1760167449.4922] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:24:09 IQ138000 wb-watchdog[17537]: [INFO] Interval #68 started. Waiting up to 60 seconds for error...
Oct 11 07:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:24:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:24:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:24:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:24:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:24:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:24:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:24:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:24:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:24:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:24:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:24:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:24:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:24:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:24:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:24:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:24:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:24:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:24:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:24:18 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:24:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:24:18 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:24:18 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:24:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:24:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:24:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:24:18 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:24:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:24:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:24:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:24:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:24:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:24:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:24:18 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:24:18 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:24:18 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:24:18 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:24:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:35 IQ138000 NetworkManager[403]: <warn>  [1760167475.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:24:35 IQ138000 NetworkManager[403]: <info>  [1760167475.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:24:35 IQ138000 NetworkManager[403]: <warn>  [1760167475.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:24:35 IQ138000 NetworkManager[403]: <info>  [1760167475.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:24:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/52
Oct 11 07:24:35 IQ138000 NetworkManager[403]: <info>  [1760167475.0699] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:24:35 IQ138000 NetworkManager[403]: <info>  [1760167475.0701] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:24:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:24:41 IQ138000 NetworkManager[403]: <info>  [1760167481.1310] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 18 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:24:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:24:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:24:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:24:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:24:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:24:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:24:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:24:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:24:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:24:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:24:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:24:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:24:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:24:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:24:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:24:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:24:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:24:48 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:24:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:24:48 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:24:48 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:24:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:24:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:24:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:24:48 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:24:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:24:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:24:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:24:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:24:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:24:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:24:48 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:24:48 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:24:48 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:24:48 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:24:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:24:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:24:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L2, row count 7183, limit 7042
Oct 11 07:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:01 IQ138000 CRON[18066]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:25:01 IQ138000 CRON[18071]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 07:25:02 IQ138000 CRON[18066]: pam_unix(cron:session): session closed for user root
Oct 11 07:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:09 IQ138000 wb-watchdog[18149]: [INFO] Interval #69 started. Waiting up to 60 seconds for error...
Oct 11 07:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8744 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 07:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 07:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 07:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 07:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 07:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:25:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:25:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:25:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:25:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:25:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:25:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:25:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:25:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:25:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:25:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:25:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:25:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:25:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:25:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:25:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:25:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:25:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:25:18 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:25:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:25:18 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:25:18 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:25:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:25:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:25:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:25:18 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:25:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:25:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:25:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:25:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:25:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:25:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:25:18 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:25:18 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:25:18 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:25:18 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4313] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4327] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4377] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4521] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4540] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4542] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4649] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4691] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4745] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4748] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4749] Config: added 'scan_ssid' value '1'
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4750] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4752] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.4754] Config: added 'psk' value '<hidden>'
Oct 11 07:25:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/53
Oct 11 07:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.5482] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:25:36 IQ138000 NetworkManager[403]: <info>  [1760167536.5484] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L1, row count 7183, limit 7042
Oct 11 07:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:25:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:25:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:25:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:25:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:25:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:25:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:25:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:25:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:25:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:25:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:25:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:25:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:25:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:25:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:25:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:25:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:25:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:25:48 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:25:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:25:48 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:25:48 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:25:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:25:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:25:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:25:48 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:25:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:25:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:25:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:25:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:25:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:25:48 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:25:48 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:25:48 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:25:48 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:25:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:25:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:02 IQ138000 NetworkManager[403]: <warn>  [1760167562.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:26:02 IQ138000 NetworkManager[403]: <info>  [1760167562.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:26:02 IQ138000 NetworkManager[403]: <warn>  [1760167562.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:26:02 IQ138000 NetworkManager[403]: <info>  [1760167562.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:26:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/53
Oct 11 07:26:02 IQ138000 NetworkManager[403]: <info>  [1760167562.0748] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:26:02 IQ138000 NetworkManager[403]: <info>  [1760167562.0750] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:26:08 IQ138000 NetworkManager[403]: <info>  [1760167568.2185] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:09 IQ138000 wb-watchdog[18848]: [INFO] Interval #70 started. Waiting up to 60 seconds for error...
Oct 11 07:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:26:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:26:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:26:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:26:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:26:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:26:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:26:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:26:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:26:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:26:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:26:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:26:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:26:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:26:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:26:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:26:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:26:19 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:26:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:26:19 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:26:19 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:26:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:26:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:26:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:26:19 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:26:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:26:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:26:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:26:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:26:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:26:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:26:19 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:26:19 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:26:19 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:26:19 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:26:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:26:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:26:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:26:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:26:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:26:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:26:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:26:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:26:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:26:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:26:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:26:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:26:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:26:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:26:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:26:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:26:49 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:26:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:26:49 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:26:49 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:26:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:26:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:26:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:26:49 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:26:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:26:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:26:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:26:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:26:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:26:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:26:49 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:26:49 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:26:49 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:26:49 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4679] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4684] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4690] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4742] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4765] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4767] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4901] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4940] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4988] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4992] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4993] Config: added 'scan_ssid' value '1'
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4994] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4995] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:27:03 IQ138000 NetworkManager[403]: <info>  [1760167623.4996] Config: added 'psk' value '<hidden>'
Oct 11 07:27:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/54
Oct 11 07:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:27:06 IQ138000 NetworkManager[403]: <info>  [1760167626.5739] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:27:06 IQ138000 NetworkManager[403]: <info>  [1760167626.5745] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:09 IQ138000 wb-watchdog[19454]: [INFO] Interval #71 started. Waiting up to 60 seconds for error...
Oct 11 07:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:27:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:27:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:27:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:27:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:27:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:27:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:27:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:27:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:27:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:27:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:27:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:27:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:27:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:27:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:27:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:27:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:27:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:27:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:27:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:27:19 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:27:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:27:19 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:27:19 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:27:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:27:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:27:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:27:19 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:27:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:27:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:27:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:27:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:27:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:27:19 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:27:19 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:27:19 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:27:19 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:27:29 IQ138000 NetworkManager[403]: <warn>  [1760167649.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:27:29 IQ138000 NetworkManager[403]: <info>  [1760167649.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:27:29 IQ138000 NetworkManager[403]: <warn>  [1760167649.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:27:29 IQ138000 NetworkManager[403]: <info>  [1760167649.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:27:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/54
Oct 11 07:27:29 IQ138000 NetworkManager[403]: <info>  [1760167649.0716] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:27:29 IQ138000 NetworkManager[403]: <info>  [1760167649.0718] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:27:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:27:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:35 IQ138000 NetworkManager[403]: <info>  [1760167655.2311] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:27:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:27:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:27:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:27:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:27:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:27:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:27:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:27:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:27:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:27:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:27:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:27:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:27:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:27:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:27:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:27:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:27:49 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:27:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:27:49 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:27:49 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:27:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:27:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:27:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:27:49 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:27:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:27:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:27:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:27:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:27:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:27:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:27:49 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:27:49 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:27:49 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:27:49 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:28:09 IQ138000 wb-watchdog[20164]: [INFO] Interval #72 started. Waiting up to 60 seconds for error...
Oct 11 07:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:28:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:28:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:28:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:28:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:28:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:28:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:28:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:28:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:28:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:28:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:28:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:28:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:28:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:28:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:28:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:28:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:28:19 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:28:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:28:19 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:28:19 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:28:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:28:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:28:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:28:19 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:28:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:28:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:28:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:28:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:28:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:28:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:28:20 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:28:20 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:28:20 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:28:20 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4103] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4108] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4113] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4171] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4238] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4241] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4341] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4364] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4383] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4386] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4387] Config: added 'scan_ssid' value '1'
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4388] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4389] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.4390] Config: added 'psk' value '<hidden>'
Oct 11 07:28:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/55
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.5241] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:28:30 IQ138000 NetworkManager[403]: <info>  [1760167710.5243] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:28:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:28:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:28:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:28:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:28:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:28:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:28:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:28:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:28:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:28:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:28:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:28:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:28:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:28:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:28:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:28:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:28:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:28:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:28:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:28:50 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:28:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:28:50 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:28:50 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:28:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:28:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:28:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:28:50 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:28:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:28:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:28:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:28:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:28:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:28:50 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:28:50 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:28:50 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:28:50 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:56 IQ138000 NetworkManager[403]: <warn>  [1760167736.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:28:56 IQ138000 NetworkManager[403]: <info>  [1760167736.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:28:56 IQ138000 NetworkManager[403]: <warn>  [1760167736.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:28:56 IQ138000 NetworkManager[403]: <info>  [1760167736.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:28:56 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:28:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/55
Oct 11 07:28:56 IQ138000 NetworkManager[403]: <info>  [1760167736.0679] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:28:56 IQ138000 NetworkManager[403]: <info>  [1760167736.0681] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:28:56 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:02 IQ138000 NetworkManager[403]: <info>  [1760167742.2180] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:10 IQ138000 wb-watchdog[20786]: [INFO] Interval #73 started. Waiting up to 60 seconds for error...
Oct 11 07:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 07:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 07:29:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 07:29:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 07:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:29:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:29:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:29:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:29:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:29:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:29:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:29:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:29:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:29:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:29:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:29:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:29:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:29:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:29:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:29:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:29:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:29:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:29:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:29:20 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:29:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:29:20 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:29:20 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:29:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:29:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:29:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:29:20 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:29:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:29:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:29:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:29:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:29:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:29:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:29:20 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:29:20 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:29:20 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:29:20 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:29:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:29:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:29:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:29:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:29:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:29:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:29:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:29:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:29:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:29:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:29:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:29:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:29:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:29:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:29:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:29:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:29:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:29:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:29:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:29:50 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:29:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:29:50 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:29:50 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:29:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:29:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:29:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:29:50 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:29:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:29:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:29:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:29:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:29:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:29:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:29:50 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:29:50 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:29:50 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:29:50 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:29:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:29:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4196] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4207] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4220] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4438] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4468] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4470] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4683] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4718] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4750] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4754] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4755] Config: added 'scan_ssid' value '1'
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4756] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4757] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:29:57 IQ138000 NetworkManager[403]: <info>  [1760167797.4757] Config: added 'psk' value '<hidden>'
Oct 11 07:29:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/56
Oct 11 07:30:00 IQ138000 NetworkManager[403]: <info>  [1760167800.5529] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:30:00 IQ138000 NetworkManager[403]: <info>  [1760167800.5545] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:09 IQ138000 wb-watchdog[21485]: [INFO] Interval #74 started. Waiting up to 60 seconds for error...
Oct 11 07:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:30:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:30:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:30:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:30:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:30:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:30:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:30:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:30:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:30:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:30:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:30:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:30:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:30:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:30:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:30:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:30:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:30:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:30:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:30:20 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:30:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:30:20 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:30:20 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:30:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:30:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:30:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:30:20 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:30:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:30:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:30:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:30:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:30:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:30:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:30:20 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:30:20 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:30:20 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:30:20 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:30:23 IQ138000 NetworkManager[403]: <warn>  [1760167823.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:30:23 IQ138000 NetworkManager[403]: <info>  [1760167823.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:30:23 IQ138000 NetworkManager[403]: <warn>  [1760167823.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:30:23 IQ138000 NetworkManager[403]: <info>  [1760167823.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:30:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/56
Oct 11 07:30:23 IQ138000 NetworkManager[403]: <info>  [1760167823.0694] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:30:23 IQ138000 NetworkManager[403]: <info>  [1760167823.0696] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:29 IQ138000 NetworkManager[403]: <info>  [1760167829.1835] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:30:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:30:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:30:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:30:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:30:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:30:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:30:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:30:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:30:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:30:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:30:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:30:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:30:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:30:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:30:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:30:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:30:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:30:51 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:30:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:30:51 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:30:51 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:30:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:30:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:30:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:30:51 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:30:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:30:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:30:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:30:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:30:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:30:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:30:51 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:30:51 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:30:51 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:30:51 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:30:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L3, row count 7183, limit 7042
Oct 11 07:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:30:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:30:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:31:09 IQ138000 wb-watchdog[22093]: [INFO] Interval #75 started. Waiting up to 60 seconds for error...
Oct 11 07:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:31:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:31:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:31:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:31:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:31:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:31:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:31:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:31:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:31:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:31:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:31:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:31:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:31:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:31:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:31:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:31:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:31:21 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:31:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:31:21 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:31:21 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:31:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:31:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:31:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:31:21 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:31:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:31:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:31:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:31:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:31:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:31:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:31:21 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:31:21 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:31:21 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:31:21 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4592] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4618] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4644] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4739] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4778] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4790] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4894] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4925] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4955] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4959] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4960] Config: added 'scan_ssid' value '1'
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4961] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4963] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.4964] Config: added 'psk' value '<hidden>'
Oct 11 07:31:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/57
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.5675] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:31:24 IQ138000 NetworkManager[403]: <info>  [1760167884.5678] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:31:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:31:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:50 IQ138000 NetworkManager[403]: <warn>  [1760167910.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:31:50 IQ138000 NetworkManager[403]: <info>  [1760167910.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:31:50 IQ138000 NetworkManager[403]: <warn>  [1760167910.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:31:50 IQ138000 NetworkManager[403]: <info>  [1760167910.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:31:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:31:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/57
Oct 11 07:31:50 IQ138000 NetworkManager[403]: <info>  [1760167910.0738] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:31:50 IQ138000 NetworkManager[403]: <info>  [1760167910.0740] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:31:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:31:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:31:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:31:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:31:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:31:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:31:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:31:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:31:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:31:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:31:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:31:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:31:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:31:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:31:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:31:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:31:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:31:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:31:51 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:31:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:31:51 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:31:51 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:31:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:31:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:31:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:31:51 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:31:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:31:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:31:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:31:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:31:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:31:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:31:51 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:31:51 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:31:51 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:31:51 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:31:56 IQ138000 NetworkManager[403]: <info>  [1760167916.2170] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:09 IQ138000 wb-watchdog[22795]: [INFO] Interval #76 started. Waiting up to 60 seconds for error...
Oct 11 07:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:32:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:32:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:32:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:32:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:32:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:32:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:32:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:32:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:32:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:32:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:32:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:32:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:32:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:32:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:32:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:32:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:32:21 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:32:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:32:21 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:32:21 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:32:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:32:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:32:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:32:21 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:32:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:32:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:32:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:32:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:32:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:32:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:32:21 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:32:21 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:32:21 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:32:21 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:32:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:32:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16936 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:41 IQ138000 npm[3801]: [2025-10-11 07:32:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.92,"last_seen":1760167961723,"linkquality":61,"power_outage_count":25795,"pressure":993.8,"temperature":20.42,"voltage":2995}'
Oct 11 07:32:41 IQ138000 npm[3801]: [2025-10-11 07:32:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.74,"last_seen":1760167961744,"linkquality":58,"power_outage_count":25795,"pressure":993.8,"temperature":20.42,"voltage":2995}'
Oct 11 07:32:41 IQ138000 npm[3801]: [2025-10-11 07:32:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.74,"last_seen":1760167961744,"linkquality":58,"power_outage_count":25795,"pressure":993.5,"temperature":20.42,"voltage":2995}'
Oct 11 07:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5341] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5352] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5358] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5425] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5453] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5455] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5568] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5595] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5613] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5617] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5618] Config: added 'scan_ssid' value '1'
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5619] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5620] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:32:51 IQ138000 NetworkManager[403]: <info>  [1760167971.5621] Config: added 'psk' value '<hidden>'
Oct 11 07:32:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/58
Oct 11 07:32:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:32:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:32:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:32:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:32:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:32:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:32:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:32:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:32:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:32:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:32:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:32:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:32:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:32:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:32:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:32:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:32:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:32:51 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:32:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:32:51 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:32:51 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:32:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:32:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:32:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:32:51 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:32:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:32:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:32:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:32:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:32:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:32:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:32:51 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:32:51 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:32:51 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:32:51 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:32:53 IQ138000 NetworkManager[403]: <info>  [1760167973.6347] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:32:53 IQ138000 NetworkManager[403]: <info>  [1760167973.6359] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:09 IQ138000 wb-watchdog[23416]: [INFO] Interval #77 started. Waiting up to 60 seconds for error...
Oct 11 07:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:33:17 IQ138000 NetworkManager[403]: <warn>  [1760167997.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:33:17 IQ138000 NetworkManager[403]: <info>  [1760167997.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:33:17 IQ138000 NetworkManager[403]: <warn>  [1760167997.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:33:17 IQ138000 NetworkManager[403]: <info>  [1760167997.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:33:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/58
Oct 11 07:33:17 IQ138000 NetworkManager[403]: <info>  [1760167997.0627] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:33:17 IQ138000 NetworkManager[403]: <info>  [1760167997.0630] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:33:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:33:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:33:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:33:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:33:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:33:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:33:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:33:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:33:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:33:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:33:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:33:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:33:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:33:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:33:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:33:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:33:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:33:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:33:21 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:33:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:33:21 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:33:21 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:33:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:33:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:33:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:33:21 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:33:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:33:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:33:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:33:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:33:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:33:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:33:22 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:33:22 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:33:22 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:33:22 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:23 IQ138000 NetworkManager[403]: <info>  [1760168003.2901] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:33:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:33:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:33:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:33:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:33:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:33:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:33:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:33:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:33:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:33:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:33:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:33:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:33:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:33:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:33:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:33:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:33:52 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:33:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:33:52 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:33:52 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:33:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:33:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:33:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:33:52 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:33:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:33:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:33:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:33:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:33:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:33:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:33:52 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:33:52 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:33:52 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:33:52 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:34:09 IQ138000 wb-watchdog[24118]: [INFO] Interval #78 started. Waiting up to 60 seconds for error...
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5426] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5431] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5437] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5593] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5612] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5614] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5700] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5763] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5782] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5786] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5787] Config: added 'scan_ssid' value '1'
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5788] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5790] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.5791] Config: added 'psk' value '<hidden>'
Oct 11 07:34:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/59
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.6459] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:34:18 IQ138000 NetworkManager[403]: <info>  [1760168058.6462] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:34:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:34:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:34:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:34:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:34:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:34:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:34:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:34:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:34:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:34:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:34:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:34:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:34:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:34:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:34:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:34:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:34:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:34:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:34:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:34:22 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:34:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:34:22 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:34:22 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:34:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:34:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:34:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:34:22 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:34:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:34:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:34:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:34:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:34:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:34:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:34:22 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:34:22 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:34:22 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:34:22 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:34:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:34:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:34:44 IQ138000 NetworkManager[403]: <warn>  [1760168084.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:34:44 IQ138000 NetworkManager[403]: <info>  [1760168084.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:34:44 IQ138000 NetworkManager[403]: <warn>  [1760168084.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:34:44 IQ138000 NetworkManager[403]: <info>  [1760168084.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:34:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:34:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/59
Oct 11 07:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:44 IQ138000 NetworkManager[403]: <info>  [1760168084.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:34:44 IQ138000 NetworkManager[403]: <info>  [1760168084.0715] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:50 IQ138000 NetworkManager[403]: <info>  [1760168090.2960] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:34:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:34:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:34:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:34:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:34:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:34:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:34:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:34:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:34:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:34:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:34:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:34:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:34:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:34:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:34:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:34:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:34:52 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:34:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:34:52 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:34:52 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:34:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:34:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:34:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:34:52 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:34:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:34:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:34:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:34:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:34:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:34:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:34:52 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:34:52 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:34:52 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:34:52 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:34:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L3, row count 7183, limit 7042
Oct 11 07:35:01 IQ138000 CRON[24645]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:35:01 IQ138000 CRON[24649]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 07:35:01 IQ138000 CRON[24645]: pam_unix(cron:session): session closed for user root
Oct 11 07:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:09 IQ138000 wb-watchdog[24731]: [INFO] Interval #79 started. Waiting up to 60 seconds for error...
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:35:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:35:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:35:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:35:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:35:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:35:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:35:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:35:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:35:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:35:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:35:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:35:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:35:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:35:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:35:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:35:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:35:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:35:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:35:22 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:35:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:35:22 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:35:22 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:35:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:35:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:35:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:35:22 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:35:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:35:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:35:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:35:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:35:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:35:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:35:22 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:35:22 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:35:22 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:35:22 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:35:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:35:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:35:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:35:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6101] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6106] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6126] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6219] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6250] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6273] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6402] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6422] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6453] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6456] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6457] Config: added 'scan_ssid' value '1'
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6458] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6459] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:35:45 IQ138000 NetworkManager[403]: <info>  [1760168145.6460] Config: added 'psk' value '<hidden>'
Oct 11 07:35:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/60
Oct 11 07:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:48 IQ138000 NetworkManager[403]: <info>  [1760168148.7205] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:35:48 IQ138000 NetworkManager[403]: <info>  [1760168148.7207] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:35:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:35:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:35:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:35:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:35:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:35:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:35:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:35:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:35:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:35:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:35:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:35:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:35:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:35:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:35:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:35:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:35:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:35:52 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:35:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:35:52 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:35:52 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:35:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:35:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:35:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:35:52 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:35:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:35:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:35:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:35:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:35:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:35:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:35:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:35:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:35:53 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:35:53 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:35:53 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:35:53 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:35:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:35:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:36:09 IQ138000 wb-watchdog[25438]: [INFO] Interval #80 started. Waiting up to 60 seconds for error...
Oct 11 07:36:11 IQ138000 NetworkManager[403]: <warn>  [1760168171.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:36:11 IQ138000 NetworkManager[403]: <info>  [1760168171.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:36:11 IQ138000 NetworkManager[403]: <warn>  [1760168171.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:36:11 IQ138000 NetworkManager[403]: <info>  [1760168171.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:36:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/60
Oct 11 07:36:11 IQ138000 NetworkManager[403]: <info>  [1760168171.0719] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:36:11 IQ138000 NetworkManager[403]: <info>  [1760168171.0733] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:36:17 IQ138000 NetworkManager[403]: <info>  [1760168177.5501] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:36:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:36:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:36:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:36:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:36:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:36:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:36:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:36:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:36:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:36:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:36:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:36:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:36:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:36:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:36:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:36:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:36:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:36:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:36:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:36:23 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:36:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:36:23 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:36:23 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:36:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:36:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:36:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:36:23 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:36:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:36:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:36:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:36:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:36:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:36:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:36:23 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:36:23 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:36:23 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:36:23 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:36:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:36:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:36:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:36:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:36:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:36:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:36:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:36:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:36:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:36:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:36:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:36:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:36:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:36:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:36:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:36:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:36:53 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:36:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:36:53 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:36:53 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:36:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:36:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:36:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:36:53 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:36:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:36:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:36:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:36:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:36:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:36:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:36:53 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:36:53 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:36:53 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:36:53 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:56 IQ138000 npm[3801]: [2025-10-11 07:36:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.04,"last_seen":1760168216821,"linkquality":98,"power_outage_count":48745,"temperature":24.83,"voltage":3025}'
Oct 11 07:36:56 IQ138000 npm[3801]: [2025-10-11 07:36:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.78,"last_seen":1760168216857,"linkquality":102,"power_outage_count":48745,"temperature":24.83,"voltage":3025}'
Oct 11 07:36:56 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0004450311/temperature, row count 7183, limit 7042
Oct 11 07:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:09 IQ138000 wb-watchdog[26048]: [INFO] Interval #81 started. Waiting up to 60 seconds for error...
Oct 11 07:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8034] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8039] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8044] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8095] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8115] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8117] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8196] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8215] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8236] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8239] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8240] Config: added 'scan_ssid' value '1'
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8241] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8243] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8243] Config: added 'psk' value '<hidden>'
Oct 11 07:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/61
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8940] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:37:12 IQ138000 NetworkManager[403]: <info>  [1760168232.8942] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:37:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:37:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:37:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:37:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:37:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:37:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:37:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:37:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:37:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:37:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:37:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:37:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:37:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:37:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:37:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:37:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:37:23 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:37:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:37:23 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:37:23 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:37:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:37:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:37:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:37:23 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:37:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:37:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:37:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:37:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:37:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:37:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:37:23 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:37:23 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:37:23 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:37:23 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:38 IQ138000 NetworkManager[403]: <warn>  [1760168258.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:37:38 IQ138000 NetworkManager[403]: <info>  [1760168258.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:37:38 IQ138000 NetworkManager[403]: <warn>  [1760168258.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:37:38 IQ138000 NetworkManager[403]: <info>  [1760168258.0289] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:37:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/61
Oct 11 07:37:38 IQ138000 NetworkManager[403]: <info>  [1760168258.0736] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:37:38 IQ138000 NetworkManager[403]: <info>  [1760168258.0737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:37:44 IQ138000 NetworkManager[403]: <info>  [1760168264.5696] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:37:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:37:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:37:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:37:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:37:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:37:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:37:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:37:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:37:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:37:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:37:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:37:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:37:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:37:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:37:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:37:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:37:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:37:53 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:37:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:37:53 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:37:53 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:37:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:37:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:37:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:37:53 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:37:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:37:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:37:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:37:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:37:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:37:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:37:53 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:37:53 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:37:53 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:37:53 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:37:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:37:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:38:01 IQ138000 CRON[26683]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:38:01 IQ138000 CRON[26687]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 07:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:02 IQ138000 sSMTP[26698]: Unable to locate mail
Oct 11 07:38:02 IQ138000 cron[26698]: sendmail: Cannot open mail:25
Oct 11 07:38:02 IQ138000 sSMTP[26698]: Cannot open mail:25
Oct 11 07:38:02 IQ138000 CRON[26683]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 07:38:02 IQ138000 CRON[26683]: pam_unix(cron:session): session closed for user root
Oct 11 07:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:38:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:38:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:38:09 IQ138000 wb-watchdog[26776]: [INFO] Interval #82 started. Waiting up to 60 seconds for error...
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:17 IQ138000 npm[3801]: [2025-10-11 07:38:17] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.78,"last_seen":1760168297349,"linkquality":98,"power_outage_count":48745,"temperature":24.87,"voltage":3025}'
Oct 11 07:38:17 IQ138000 npm[3801]: [2025-10-11 07:38:17] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.84,"last_seen":1760168297367,"linkquality":98,"power_outage_count":48745,"temperature":24.87,"voltage":3025}'
Oct 11 07:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:38:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:38:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:38:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:38:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:38:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:38:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:38:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:38:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:38:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:38:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:38:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:38:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:38:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:38:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:38:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:38:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:38:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:38:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:38:24 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:38:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:38:24 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:38:24 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:38:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:38:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:38:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:38:24 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:38:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:38:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:38:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:38:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:38:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:38:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:38:24 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:38:24 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:38:24 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:38:24 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 07:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0206] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0211] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0217] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0300] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0346] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0347] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0438] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0463] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0483] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0487] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0488] Config: added 'scan_ssid' value '1'
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0489] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0490] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.0491] Config: added 'psk' value '<hidden>'
Oct 11 07:38:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/62
Oct 11 07:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.1261] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:38:40 IQ138000 NetworkManager[403]: <info>  [1760168320.1263] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:38:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:38:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:38:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:38:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:38:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:38:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:38:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:38:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:38:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:38:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:38:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:38:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:38:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:38:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:38:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:38:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:38:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:38:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:38:54 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:38:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:38:54 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:38:54 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:38:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:38:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:38:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:38:54 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:38:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:38:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:38:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:38:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:38:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:38:54 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:38:54 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:38:54 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:38:54 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:05 IQ138000 NetworkManager[403]: <warn>  [1760168345.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:39:05 IQ138000 NetworkManager[403]: <info>  [1760168345.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:39:05 IQ138000 NetworkManager[403]: <warn>  [1760168345.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:39:05 IQ138000 NetworkManager[403]: <info>  [1760168345.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:39:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/62
Oct 11 07:39:05 IQ138000 NetworkManager[403]: <info>  [1760168345.0711] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:39:05 IQ138000 NetworkManager[403]: <info>  [1760168345.0713] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:09 IQ138000 wb-watchdog[27381]: [INFO] Interval #83 started. Waiting up to 60 seconds for error...
Oct 11 07:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:10 IQ138000 NetworkManager[403]: <info>  [1760168350.7724] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:39:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:39:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:39:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:39:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:39:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:39:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:39:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:39:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:39:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:39:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:39:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:39:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:39:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:39:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:39:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:39:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:39:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:39:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:39:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:39:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:39:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:39:24 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:39:24 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:39:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:39:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:39:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:39:24 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:39:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:39:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:39:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:39:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:39:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:39:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:39:24 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:39:24 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:39:24 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:39:24 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_40/External Sensor 1, row count 7183, limit 7042
Oct 11 07:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:39:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:39:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:39:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:39:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:39:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:39:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:39:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:39:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:39:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:39:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:39:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:39:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:39:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:39:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:39:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:39:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:39:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:39:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:39:54 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:39:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:39:54 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:39:54 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:39:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:39:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:39:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:39:54 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:39:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:39:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:39:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:39:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:39:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:39:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:39:54 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:39:54 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:39:54 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:39:54 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:39:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:39:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9443] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9448] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9453] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9527] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9553] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9567] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9662] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9695] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9730] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9734] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9736] Config: added 'scan_ssid' value '1'
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9737] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9739] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:40:05 IQ138000 NetworkManager[403]: <info>  [1760168405.9740] Config: added 'psk' value '<hidden>'
Oct 11 07:40:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/63
Oct 11 07:40:06 IQ138000 NetworkManager[403]: <info>  [1760168406.0543] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:40:06 IQ138000 NetworkManager[403]: <info>  [1760168406.0562] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:40:09 IQ138000 wb-watchdog[28080]: [INFO] Interval #84 started. Waiting up to 60 seconds for error...
Oct 11 07:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:40:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:40:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:40:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:40:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:40:22 IQ138000 ntpd[1651]: 92.241.18.100 local addr 10.37.94.94 -> <null>
Oct 11 07:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:40:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:40:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:40:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:40:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:40:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:40:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:40:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:40:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:40:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:40:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:40:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:40:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:40:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:40:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:40:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:40:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:40:24 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:40:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:40:24 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:40:24 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:40:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:40:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:40:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:40:24 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:40:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:40:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:40:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:40:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:40:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:40:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:40:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:40:25 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:40:25 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:40:25 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:40:25 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:31 IQ138000 NetworkManager[403]: <warn>  [1760168431.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:40:31 IQ138000 NetworkManager[403]: <info>  [1760168431.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:40:31 IQ138000 NetworkManager[403]: <warn>  [1760168431.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:40:31 IQ138000 NetworkManager[403]: <info>  [1760168431.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:40:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/63
Oct 11 07:40:31 IQ138000 NetworkManager[403]: <info>  [1760168431.0720] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:40:31 IQ138000 NetworkManager[403]: <info>  [1760168431.0735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:40:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:40:36 IQ138000 NetworkManager[403]: <info>  [1760168436.7547] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:40:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:40:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:40:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:40:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:40:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:40:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:40:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:40:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:40:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:40:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:40:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:40:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:40:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:40:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:40:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:40:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:40:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:40:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:40:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:40:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:40:55 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:40:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:40:55 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:40:55 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:40:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:40:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:40:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:40:55 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:40:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:40:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:40:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:40:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:40:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:40:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:40:55 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:40:55 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:40:55 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:40:55 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:40:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L1, row count 7183, limit 7042
Oct 11 07:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:09 IQ138000 wb-watchdog[28690]: [INFO] Interval #85 started. Waiting up to 60 seconds for error...
Oct 11 07:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:41:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:41:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:41:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:41:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:41:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:41:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:41:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:41:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:41:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:41:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:41:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:41:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:41:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:41:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:41:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:41:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:41:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:41:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:41:25 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:41:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:41:25 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:41:25 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:41:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:41:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:41:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:41:25 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:41:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:41:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:41:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:41:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:41:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:41:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:41:25 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:41:25 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:41:25 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:41:25 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:31 IQ138000 NetworkManager[403]: <info>  [1760168491.9950] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:41:31 IQ138000 NetworkManager[403]: <info>  [1760168491.9956] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:41:31 IQ138000 NetworkManager[403]: <info>  [1760168491.9962] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0148] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0184] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0201] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0349] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0384] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0421] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0439] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0454] Config: added 'scan_ssid' value '1'
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0465] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0478] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.0493] Config: added 'psk' value '<hidden>'
Oct 11 07:41:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/64
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.1316] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:41:32 IQ138000 NetworkManager[403]: <info>  [1760168492.1318] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16920 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5394 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:41:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:41:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:41:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:41:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:41:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:41:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:41:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:41:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:41:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:41:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:41:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:41:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:41:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:41:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:41:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:41:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:41:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:41:55 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:41:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:41:55 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:41:55 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:41:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:41:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:41:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:41:55 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:41:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:41:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:41:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:41:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:41:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:41:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:41:55 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:41:55 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:41:55 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:41:55 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:41:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:41:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:41:57 IQ138000 NetworkManager[403]: <warn>  [1760168517.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:41:57 IQ138000 NetworkManager[403]: <info>  [1760168517.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:41:57 IQ138000 NetworkManager[403]: <warn>  [1760168517.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:41:57 IQ138000 NetworkManager[403]: <info>  [1760168517.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:41:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/64
Oct 11 07:41:57 IQ138000 NetworkManager[403]: <info>  [1760168517.0660] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:41:57 IQ138000 NetworkManager[403]: <info>  [1760168517.0661] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:42:02 IQ138000 NetworkManager[403]: <info>  [1760168522.8524] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:42:10 IQ138000 wb-watchdog[29400]: [INFO] Interval #86 started. Waiting up to 60 seconds for error...
Oct 11 07:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:42:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:42:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:42:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:42:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:42:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:42:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:42:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:42:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:42:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:42:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:42:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:42:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:42:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:42:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:42:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:42:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:42:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:42:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:42:25 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:42:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:42:25 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:42:25 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:42:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:42:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:42:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:42:25 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:42:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:42:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:42:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:42:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:42:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:42:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:42:25 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:42:25 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:42:25 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:42:25 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is disconnected
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 07:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 07:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:48 IQ138000 npm[3801]: [2025-10-11 07:42:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.84,"last_seen":1760168568573,"linkquality":72,"power_outage_count":48745,"temperature":24.83,"voltage":3025}'
Oct 11 07:42:48 IQ138000 npm[3801]: [2025-10-11 07:42:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.77,"last_seen":1760168568595,"linkquality":76,"power_outage_count":48745,"temperature":24.83,"voltage":3025}'
Oct 11 07:42:48 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0004450311/humidity, row count 7183, limit 7042
Oct 11 07:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:42:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:42:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:42:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:42:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:42:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:42:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:42:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:42:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:42:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:42:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:42:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:42:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:42:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:42:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:42:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:42:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:42:55 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:42:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:42:55 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:42:55 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:42:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:42:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:42:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:42:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:42:56 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:42:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:42:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:42:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:42:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:42:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:42:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:42:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:42:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:42:56 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:42:56 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:42:56 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:42:56 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1089] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1093] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1100] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1161] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1189] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1191] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1289] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1310] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1327] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1332] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1335] Config: added 'scan_ssid' value '1'
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1336] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1338] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.1339] Config: added 'psk' value '<hidden>'
Oct 11 07:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:42:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/65
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.2088] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:42:58 IQ138000 NetworkManager[403]: <info>  [1760168578.2090] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:42:58 IQ138000 npm[3801]: [2025-10-11 07:42:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.74,"last_seen":1760168578631,"linkquality":58,"power_outage_count":25795,"pressure":993.5,"temperature":20.4,"voltage":2995}'
Oct 11 07:42:58 IQ138000 npm[3801]: [2025-10-11 07:42:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.18,"last_seen":1760168578650,"linkquality":54,"power_outage_count":25795,"pressure":993.5,"temperature":20.4,"voltage":2995}'
Oct 11 07:42:58 IQ138000 npm[3801]: [2025-10-11 07:42:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.18,"last_seen":1760168578650,"linkquality":54,"power_outage_count":25795,"pressure":993.8,"temperature":20.4,"voltage":2995}'
Oct 11 07:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:43:09 IQ138000 npm[3801]: [2025-10-11 07:43:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.18,"last_seen":1760168589049,"linkquality":58,"power_outage_count":25795,"pressure":993.8,"temperature":20.44,"voltage":2995}'
Oct 11 07:43:09 IQ138000 npm[3801]: [2025-10-11 07:43:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.15,"last_seen":1760168589079,"linkquality":65,"power_outage_count":25795,"pressure":993.8,"temperature":20.44,"voltage":2995}'
Oct 11 07:43:09 IQ138000 npm[3801]: [2025-10-11 07:43:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.15,"last_seen":1760168589079,"linkquality":65,"power_outage_count":25795,"pressure":993.5,"temperature":20.44,"voltage":2995}'
Oct 11 07:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:10 IQ138000 wb-watchdog[30027]: [INFO] Interval #87 started. Waiting up to 60 seconds for error...
Oct 11 07:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:23 IQ138000 NetworkManager[403]: <warn>  [1760168603.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:43:23 IQ138000 NetworkManager[403]: <info>  [1760168603.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:43:23 IQ138000 NetworkManager[403]: <warn>  [1760168603.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:43:23 IQ138000 NetworkManager[403]: <info>  [1760168603.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:43:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/65
Oct 11 07:43:23 IQ138000 NetworkManager[403]: <info>  [1760168603.0721] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:43:23 IQ138000 NetworkManager[403]: <info>  [1760168603.0723] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:43:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:43:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:43:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:43:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:43:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:43:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:43:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:43:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:43:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:43:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:43:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:43:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:43:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:43:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:43:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:43:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:43:26 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:43:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:43:26 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:43:26 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:43:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:43:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:43:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:43:26 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:43:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:43:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:43:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:43:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:43:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:43:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:43:26 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:43:26 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:43:26 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:43:26 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:28 IQ138000 NetworkManager[403]: <info>  [1760168608.8854] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:43:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0007e48747/battery, row count 7183, limit 7042
Oct 11 07:43:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L3, row count 7183, limit 7042
Oct 11 07:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:43:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:43:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:43:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:43:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:43:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:43:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:43:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:43:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:43:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:43:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:43:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:43:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:43:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:43:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:43:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:43:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:43:56 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:43:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:43:56 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:43:56 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:43:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:43:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:43:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:43:56 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:43:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:43:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:43:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:43:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:43:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:43:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:43:56 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:43:56 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:43:56 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:43:56 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:10 IQ138000 wb-watchdog[30730]: [INFO] Interval #88 started. Waiting up to 60 seconds for error...
Oct 11 07:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16912 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:44:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:44:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.2833] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.2853] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.2861] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.2918] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.2935] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.2937] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3043] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3077] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3097] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3102] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3103] Config: added 'scan_ssid' value '1'
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3104] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3105] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3106] Config: added 'psk' value '<hidden>'
Oct 11 07:44:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/66
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3815] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:44:24 IQ138000 NetworkManager[403]: <info>  [1760168664.3817] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:44:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:44:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:44:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:44:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:44:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:44:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:44:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:44:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:44:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:44:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:44:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:44:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:44:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:44:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:44:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:44:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:44:26 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:44:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:44:26 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:44:26 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:44:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:44:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:44:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:44:26 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:44:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:44:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:44:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:44:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:44:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:44:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:44:26 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:44:26 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:44:26 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:44:26 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:44:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:44:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:50 IQ138000 NetworkManager[403]: <warn>  [1760168690.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:44:50 IQ138000 NetworkManager[403]: <info>  [1760168690.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:44:50 IQ138000 NetworkManager[403]: <warn>  [1760168690.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:44:50 IQ138000 NetworkManager[403]: <info>  [1760168690.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:44:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:44:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/66
Oct 11 07:44:50 IQ138000 NetworkManager[403]: <info>  [1760168690.0664] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:44:50 IQ138000 NetworkManager[403]: <info>  [1760168690.0680] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:44:56 IQ138000 NetworkManager[403]: <info>  [1760168696.0562] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:44:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:44:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:44:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:44:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:44:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:44:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:44:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:44:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:44:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:44:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:44:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:44:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:44:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:44:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:44:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:44:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:44:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:44:56 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:44:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:44:56 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:44:56 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:44:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:44:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:44:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:44:56 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:44:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:44:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:44:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:44:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:44:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:44:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:44:56 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:44:56 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:44:56 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:44:56 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:01 IQ138000 CRON[31250]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:45:01 IQ138000 CRON[31260]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 07:45:01 IQ138000 CRON[31250]: pam_unix(cron:session): session closed for user root
Oct 11 07:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:45:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:45:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:45:10 IQ138000 wb-watchdog[31343]: [INFO] Interval #89 started. Waiting up to 60 seconds for error...
Oct 11 07:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:45:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:45:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:19 IQ138000 npm[3801]: [2025-10-11 07:45:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.77,"last_seen":1760168719364,"linkquality":94,"power_outage_count":48745,"temperature":24.8,"voltage":3025}'
Oct 11 07:45:19 IQ138000 npm[3801]: [2025-10-11 07:45:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.78,"last_seen":1760168719377,"linkquality":94,"power_outage_count":48745,"temperature":24.8,"voltage":3025}'
Oct 11 07:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:45:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:45:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:45:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:45:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:45:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:45:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:45:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:45:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:45:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:45:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:45:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:45:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:45:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:45:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:45:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:45:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:45:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:45:27 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:45:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:45:27 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:45:27 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:45:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:45:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:45:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:45:27 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:45:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:45:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:45:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:45:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:45:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:45:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:45:27 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:45:27 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:45:27 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:45:27 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:45:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:45:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3364] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3379] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3388] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3483] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3515] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3517] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3661] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3681] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3711] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3727] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3739] Config: added 'scan_ssid' value '1'
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3749] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3759] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:45:51 IQ138000 NetworkManager[403]: <info>  [1760168751.3768] Config: added 'psk' value '<hidden>'
Oct 11 07:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/67
Oct 11 07:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:45:54 IQ138000 NetworkManager[403]: <info>  [1760168754.4854] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:45:54 IQ138000 NetworkManager[403]: <info>  [1760168754.4856] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:45:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:45:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:45:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:45:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:45:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:45:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:45:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:45:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:45:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:45:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:45:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:45:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:45:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:45:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:45:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:45:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:45:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:45:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:45:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:45:57 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:45:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:45:57 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:45:57 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:45:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:45:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:45:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:45:57 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:45:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:45:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:45:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:45:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:45:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:45:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:45:57 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:45:57 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:45:57 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:45:57 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:10 IQ138000 wb-watchdog[32050]: [INFO] Interval #90 started. Waiting up to 60 seconds for error...
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:46:17 IQ138000 NetworkManager[403]: <warn>  [1760168777.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:46:17 IQ138000 NetworkManager[403]: <info>  [1760168777.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:46:17 IQ138000 NetworkManager[403]: <warn>  [1760168777.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:46:17 IQ138000 NetworkManager[403]: <info>  [1760168777.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:46:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/67
Oct 11 07:46:17 IQ138000 NetworkManager[403]: <info>  [1760168777.0779] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:46:17 IQ138000 NetworkManager[403]: <info>  [1760168777.0781] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:23 IQ138000 NetworkManager[403]: <info>  [1760168783.1263] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:46:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:46:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:46:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:46:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:46:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:46:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:46:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:46:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:46:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:46:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:46:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:46:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:46:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:46:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:46:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:46:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:46:27 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:46:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:46:27 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:46:27 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:46:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:46:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:46:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:46:27 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:46:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:46:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:46:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:46:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:46:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:46:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:46:27 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:46:27 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:46:27 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:46:27 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:46:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:46:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:46:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:46:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:46:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:46:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:46:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:46:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:46:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:46:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:46:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:46:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:46:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:46:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:46:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:46:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:46:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:46:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:46:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:46:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:46:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:46:57 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:46:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:46:57 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:46:57 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:46:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:46:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:46:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:46:57 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:46:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:46:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:46:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:46:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:46:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:46:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:46:57 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:46:57 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:46:57 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:46:57 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:10 IQ138000 wb-watchdog[32646]: [INFO] Interval #91 started. Waiting up to 60 seconds for error...
Oct 11 07:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:47:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:47:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3690] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3695] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3702] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3793] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3811] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3814] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3911] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3937] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3959] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3964] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3967] Config: added 'scan_ssid' value '1'
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3977] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3982] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.3984] Config: added 'psk' value '<hidden>'
Oct 11 07:47:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/68
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.4985] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:47:18 IQ138000 NetworkManager[403]: <info>  [1760168838.4988] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12804 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:47:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:47:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:47:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:47:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:47:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:47:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:47:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:47:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:47:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:47:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:47:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:47:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:47:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:47:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:47:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:47:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:47:27 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:47:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:47:27 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:47:27 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:47:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:47:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:47:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:47:27 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:47:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:47:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:47:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:47:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:47:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:47:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:47:27 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:47:27 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:47:27 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:47:27 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:44 IQ138000 NetworkManager[403]: <warn>  [1760168864.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:47:44 IQ138000 NetworkManager[403]: <info>  [1760168864.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:47:44 IQ138000 NetworkManager[403]: <warn>  [1760168864.0262] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:47:44 IQ138000 NetworkManager[403]: <info>  [1760168864.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:47:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:47:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/68
Oct 11 07:47:44 IQ138000 NetworkManager[403]: <info>  [1760168864.0791] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:47:44 IQ138000 NetworkManager[403]: <info>  [1760168864.0793] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:47:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:50 IQ138000 NetworkManager[403]: <info>  [1760168870.1492] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:47:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:47:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:47:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:47:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:47:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:47:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:47:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:47:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:47:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:47:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:47:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:47:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:47:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:47:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:47:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:47:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:47:58 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:47:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:47:58 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:47:58 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:47:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:47:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:47:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:47:58 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:47:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:47:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:47:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:47:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:47:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:47:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:47:58 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:47:58 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:47:58 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:47:58 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5892 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:48:10 IQ138000 wb-watchdog[928]: [INFO] Interval #92 started. Waiting up to 60 seconds for error...
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13074 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:48:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:48:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:48:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:48:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:48:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:48:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:48:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:48:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:48:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:48:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:48:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:48:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:48:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:48:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:48:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:48:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:48:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:48:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:48:28 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:48:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:48:28 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:48:28 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:48:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:48:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:48:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:48:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:48:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:48:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:48:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:48:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:48:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:48:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:48:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:48:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:48:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:48:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:48:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:48:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.6975] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.6980] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.6986] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7040] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7057] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7059] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7155] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7202] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7221] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7224] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7225] Config: added 'scan_ssid' value '1'
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7226] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7227] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:48:45 IQ138000 NetworkManager[403]: <info>  [1760168925.7228] Config: added 'psk' value '<hidden>'
Oct 11 07:48:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/69
Oct 11 07:48:48 IQ138000 NetworkManager[403]: <info>  [1760168928.7978] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:48:48 IQ138000 NetworkManager[403]: <info>  [1760168928.7980] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:48:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:48:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:48:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:48:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:48:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:48:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:48:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:48:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:48:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:48:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:48:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:48:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:48:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:48:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:48:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:48:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:48:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:48:58 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:48:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:48:58 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:48:58 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:48:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:48:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:48:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:48:58 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:48:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:48:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:48:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:48:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:48:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:48:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:48:58 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:48:58 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:48:58 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:48:58 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:10 IQ138000 wb-watchdog[1540]: [INFO] Interval #93 started. Waiting up to 60 seconds for error...
Oct 11 07:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:49:11 IQ138000 NetworkManager[403]: <warn>  [1760168951.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:49:11 IQ138000 NetworkManager[403]: <info>  [1760168951.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:49:11 IQ138000 NetworkManager[403]: <warn>  [1760168951.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:49:11 IQ138000 NetworkManager[403]: <info>  [1760168951.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:49:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/69
Oct 11 07:49:11 IQ138000 NetworkManager[403]: <info>  [1760168951.0751] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:49:11 IQ138000 NetworkManager[403]: <info>  [1760168951.0754] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:17 IQ138000 NetworkManager[403]: <info>  [1760168957.6331] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:49:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:49:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:49:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:49:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:49:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:49:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:49:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:49:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:49:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:49:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:49:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:49:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:49:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:49:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:49:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:49:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:49:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:49:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:49:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:49:28 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:49:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:49:28 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:49:28 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:49:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:49:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:49:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:49:28 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:49:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:49:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:49:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:49:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:49:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:49:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:49:28 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:49:28 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:49:28 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:49:28 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:49:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:49:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:55 IQ138000 npm[3801]: [2025-10-11 07:49:55] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.78,"last_seen":1760168995634,"linkquality":98,"power_outage_count":48745,"temperature":24.84,"voltage":3025}'
Oct 11 07:49:55 IQ138000 npm[3801]: [2025-10-11 07:49:55] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.74,"last_seen":1760168995647,"linkquality":94,"power_outage_count":48745,"temperature":24.84,"voltage":3025}'
Oct 11 07:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:49:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:49:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:49:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:49:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:49:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:49:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:49:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:49:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:49:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:49:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:49:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:49:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:49:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:49:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:49:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:49:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:49:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:49:58 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:49:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:49:58 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:49:58 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:49:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:49:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:49:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:49:58 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:49:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:49:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:49:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:49:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:49:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:49:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:49:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:49:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:49:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:49:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:49:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:49:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:50:10 IQ138000 wb-watchdog[2282]: [INFO] Interval #94 started. Waiting up to 60 seconds for error...
Oct 11 07:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9071] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9089] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9102] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9153] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9170] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9171] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9266] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9286] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9304] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9308] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9310] Config: added 'scan_ssid' value '1'
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9320] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9323] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:50:12 IQ138000 NetworkManager[403]: <info>  [1760169012.9324] Config: added 'psk' value '<hidden>'
Oct 11 07:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/70
Oct 11 07:50:13 IQ138000 NetworkManager[403]: <info>  [1760169013.0102] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:50:13 IQ138000 NetworkManager[403]: <info>  [1760169013.0104] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:50:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:50:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:50:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:50:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:50:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:50:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:50:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:50:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:50:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:50:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:50:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:50:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:50:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:50:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:50:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:50:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:50:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:50:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:50:29 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:50:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:50:29 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:50:29 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:50:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:50:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:50:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:50:29 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:50:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:50:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:50:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:50:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:50:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:50:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:50:29 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:50:29 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:50:29 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:50:29 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:50:38 IQ138000 NetworkManager[403]: <warn>  [1760169038.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:50:38 IQ138000 NetworkManager[403]: <info>  [1760169038.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:50:38 IQ138000 NetworkManager[403]: <warn>  [1760169038.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:50:38 IQ138000 NetworkManager[403]: <info>  [1760169038.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:50:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/70
Oct 11 07:50:38 IQ138000 NetworkManager[403]: <info>  [1760169038.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:50:38 IQ138000 NetworkManager[403]: <info>  [1760169038.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:43 IQ138000 NetworkManager[403]: <info>  [1760169043.7571] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:50:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:50:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:50:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:50:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:50:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:50:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:50:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:50:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:50:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:50:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:50:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:50:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:50:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:50:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:50:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:50:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:50:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:50:59 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:50:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:50:59 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:50:59 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:50:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:50:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:50:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:50:59 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:50:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:50:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:50:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:50:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:50:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:50:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:50:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:50:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:50:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:50:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:51:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:51:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:51:10 IQ138000 wb-watchdog[2932]: [INFO] Interval #95 started. Waiting up to 60 seconds for error...
Oct 11 07:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:51:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:51:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:51:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:51:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:51:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:51:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:51:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:51:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:51:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:51:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:51:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:51:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:51:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:51:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:51:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:51:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:51:29 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:51:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:51:29 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:51:29 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:51:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:51:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:51:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:51:29 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:51:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:51:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:51:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:51:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:51:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:51:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:51:29 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:51:29 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:51:29 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:51:29 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:51:38 IQ138000 NetworkManager[403]: <info>  [1760169098.9905] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:51:38 IQ138000 NetworkManager[403]: <info>  [1760169098.9927] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:51:38 IQ138000 NetworkManager[403]: <info>  [1760169098.9934] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0014] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0078] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0080] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0186] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0205] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0231] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0235] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0236] Config: added 'scan_ssid' value '1'
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0237] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0238] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.0239] Config: added 'psk' value '<hidden>'
Oct 11 07:51:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/71
Oct 11 07:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.1022] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:51:39 IQ138000 NetworkManager[403]: <info>  [1760169099.1032] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:51:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:51:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:55 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0004450311/linkquality, row count 7183, limit 7042
Oct 11 07:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:51:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:51:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:51:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:51:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:51:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:51:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:51:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:51:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:51:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:51:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:51:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:51:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:51:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:51:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:51:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:51:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:51:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:51:59 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:51:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:51:59 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:51:59 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:51:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:51:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:51:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:51:59 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:51:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:51:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:51:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:51:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:51:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:51:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:51:59 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:51:59 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:51:59 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:51:59 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:04 IQ138000 NetworkManager[403]: <warn>  [1760169124.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:52:04 IQ138000 NetworkManager[403]: <info>  [1760169124.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:52:04 IQ138000 NetworkManager[403]: <warn>  [1760169124.0275] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:52:04 IQ138000 NetworkManager[403]: <info>  [1760169124.0293] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:52:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/71
Oct 11 07:52:04 IQ138000 NetworkManager[403]: <info>  [1760169124.0722] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:52:04 IQ138000 NetworkManager[403]: <info>  [1760169124.0724] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:52:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:52:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:09 IQ138000 NetworkManager[403]: <info>  [1760169129.8005] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:10 IQ138000 wb-watchdog[3642]: [INFO] Interval #96 started. Waiting up to 60 seconds for error...
Oct 11 07:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:52:11 IQ138000 kernel: hrtimer: interrupt took 135374 ns
Oct 11 07:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:21 IQ138000 npm[3801]: [2025-10-11 07:52:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.74,"last_seen":1760169141399,"linkquality":98,"power_outage_count":48745,"temperature":24.84,"voltage":3025}'
Oct 11 07:52:21 IQ138000 npm[3801]: [2025-10-11 07:52:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.97,"last_seen":1760169141412,"linkquality":102,"power_outage_count":48745,"temperature":24.84,"voltage":3025}'
Oct 11 07:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:52:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:52:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:52:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:52:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:52:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:52:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:52:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:52:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:52:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:52:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:52:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:52:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:52:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:52:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:52:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:52:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:52:29 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:52:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:52:29 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:52:29 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:52:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:52:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:52:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:52:29 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:52:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:52:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:52:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:52:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:52:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:52:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:52:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:52:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:52:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:52:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:52:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:52:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:52:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:52:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:52:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:52:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:53:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:53:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:53:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:53:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:53:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:53:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:53:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:53:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:53:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:53:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:53:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:53:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:53:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:53:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:53:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:53:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:53:00 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:53:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:53:00 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:53:00 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:53:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:53:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:53:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:53:00 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:53:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:53:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:53:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:53:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:53:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:53:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:53:00 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:53:00 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:53:00 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:53:00 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9547] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9565] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9576] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9708] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9736] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9738] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:53:04 IQ138000 NetworkManager[403]: <info>  [1760169184.9973] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0003] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:53:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/72
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0027] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0035] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0036] Config: added 'scan_ssid' value '1'
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0037] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0038] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0041] Config: added 'psk' value '<hidden>'
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0714] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:53:05 IQ138000 NetworkManager[403]: <info>  [1760169185.0716] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:10 IQ138000 wb-watchdog[4273]: [INFO] Interval #97 started. Waiting up to 60 seconds for error...
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:30 IQ138000 NetworkManager[403]: <warn>  [1760169210.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:53:30 IQ138000 NetworkManager[403]: <info>  [1760169210.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:53:30 IQ138000 NetworkManager[403]: <warn>  [1760169210.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:53:30 IQ138000 NetworkManager[403]: <info>  [1760169210.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:53:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/72
Oct 11 07:53:30 IQ138000 NetworkManager[403]: <info>  [1760169210.0738] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:53:30 IQ138000 NetworkManager[403]: <info>  [1760169210.0740] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:53:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:53:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:53:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:53:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:53:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:53:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:53:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:53:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:53:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:53:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:53:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:53:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:53:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:53:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:53:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:53:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:53:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:53:30 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:53:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:53:30 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:53:30 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:53:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:53:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:53:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:53:30 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:53:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:53:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:53:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:53:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:53:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:53:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:53:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:53:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:53:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:53:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:35 IQ138000 NetworkManager[403]: <info>  [1760169215.7577] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:54:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:54:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:54:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:54:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:54:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:54:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:54:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:54:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:54:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:54:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:54:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:54:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:54:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:54:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:54:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:54:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:54:00 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:54:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:54:00 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:54:00 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:54:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:54:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:54:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:54:00 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:54:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:54:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:54:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:54:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:54:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:54:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:54:00 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:54:00 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:54:00 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:54:00 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13318 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:54:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:54:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:10 IQ138000 wb-watchdog[5024]: [INFO] Interval #98 started. Waiting up to 60 seconds for error...
Oct 11 07:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:54:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:54:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:54:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:54:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:54:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:54:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:54:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:54:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:54:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:54:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:54:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:54:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:54:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:54:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:54:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:54:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:54:30 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:54:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:54:30 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:54:30 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:54:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:54:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:54:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:54:30 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:54:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:54:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:54:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:54:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:54:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:54:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:54:30 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:54:30 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:54:30 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:54:30 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9475] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9500] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9508] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9593] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9618] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9620] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9721] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9770] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9788] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9791] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9792] Config: added 'scan_ssid' value '1'
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9793] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9794] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:54:30 IQ138000 NetworkManager[403]: <info>  [1760169270.9795] Config: added 'psk' value '<hidden>'
Oct 11 07:54:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/73
Oct 11 07:54:31 IQ138000 NetworkManager[403]: <info>  [1760169271.0512] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:54:31 IQ138000 NetworkManager[403]: <info>  [1760169271.0514] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:54:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:54:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:54:46 IQ138000 npm[3801]: [2025-10-11 07:54:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.07,"last_seen":1760169286822,"linkquality":58,"power_outage_count":25795,"pressure":993.6,"temperature":20.47,"voltage":2995}'
Oct 11 07:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:56 IQ138000 NetworkManager[403]: <warn>  [1760169296.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:54:56 IQ138000 NetworkManager[403]: <info>  [1760169296.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:54:56 IQ138000 NetworkManager[403]: <warn>  [1760169296.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:54:56 IQ138000 NetworkManager[403]: <info>  [1760169296.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:54:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/73
Oct 11 07:54:56 IQ138000 NetworkManager[403]: <info>  [1760169296.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:54:56 IQ138000 NetworkManager[403]: <info>  [1760169296.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:54:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:54:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:55:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:55:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:55:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:55:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:55:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:55:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:55:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:55:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:55:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:55:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:55:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:55:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:55:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:55:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:55:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:55:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:55:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:55:01 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:55:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:55:01 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:55:01 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:55:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:55:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:55:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:55:01 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:55:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:55:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:55:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:55:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:55:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:55:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:55:01 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:55:01 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:55:01 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:55:01 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:55:01 IQ138000 CRON[5555]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 07:55:01 IQ138000 CRON[5559]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 07:55:01 IQ138000 CRON[5555]: pam_unix(cron:session): session closed for user root
Oct 11 07:55:01 IQ138000 NetworkManager[403]: <info>  [1760169301.7547] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:55:07 IQ138000 npm[3801]: [2025-10-11 07:55:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.72,"last_seen":1760169307275,"linkquality":105,"power_outage_count":48745,"temperature":25.02,"voltage":3025}'
Oct 11 07:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 07:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:55:10 IQ138000 wb-watchdog[5642]: [INFO] Interval #99 started. Waiting up to 60 seconds for error...
Oct 11 07:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 07:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:55:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:55:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 07:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:55:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:55:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:55:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:55:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:55:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:55:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:55:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:55:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:55:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:55:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:55:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:55:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:55:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:55:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:55:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:55:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:55:31 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:55:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:55:31 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:55:31 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:55:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:55:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:55:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:55:31 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:55:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:55:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:55:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:55:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:55:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:55:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:55:31 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:55:31 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:55:31 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:55:31 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:55:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L1, row count 7183, limit 7042
Oct 11 07:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:55:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:55:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:55:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:55:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2044] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2049] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2055] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2114] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2132] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2134] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2229] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2249] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2267] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2270] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2271] Config: added 'scan_ssid' value '1'
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2272] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2273] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2274] Config: added 'psk' value '<hidden>'
Oct 11 07:55:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/74
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.2999] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:55:57 IQ138000 NetworkManager[403]: <info>  [1760169357.3001] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:56:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:56:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:56:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:56:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:56:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:56:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:56:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:56:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:56:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:56:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:56:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:56:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:56:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:56:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:56:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:56:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:56:01 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:56:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:56:01 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:56:01 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:56:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:56:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:56:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:56:01 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:56:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:56:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:56:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:56:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:56:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:56:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:56:01 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:56:01 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:56:01 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:56:01 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:10 IQ138000 wb-watchdog[6374]: [INFO] Interval #100 started. Waiting up to 60 seconds for error...
Oct 11 07:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:56:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:56:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:56:22 IQ138000 NetworkManager[403]: <warn>  [1760169382.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:56:22 IQ138000 NetworkManager[403]: <info>  [1760169382.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:56:22 IQ138000 NetworkManager[403]: <warn>  [1760169382.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:56:22 IQ138000 NetworkManager[403]: <info>  [1760169382.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:56:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/74
Oct 11 07:56:22 IQ138000 NetworkManager[403]: <info>  [1760169382.0771] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:56:22 IQ138000 NetworkManager[403]: <info>  [1760169382.0774] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:56:27 IQ138000 NetworkManager[403]: <info>  [1760169387.9507] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:56:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:56:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:56:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:56:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:56:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:56:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:56:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:56:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:56:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:56:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:56:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:56:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:56:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:56:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:56:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:56:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:56:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:56:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:56:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:56:31 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:56:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:56:31 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:56:31 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:56:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:56:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:56:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:56:31 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:56:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:56:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:56:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:56:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:56:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:56:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:56:31 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:56:31 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:56:31 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:56:31 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:56:48 IQ138000 npm[3801]: [2025-10-11 07:56:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.72,"last_seen":1760169408467,"linkquality":98,"power_outage_count":48745,"temperature":24.8,"voltage":3025}'
Oct 11 07:56:48 IQ138000 npm[3801]: [2025-10-11 07:56:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.94,"last_seen":1760169408481,"linkquality":102,"power_outage_count":48745,"temperature":24.8,"voltage":3025}'
Oct 11 07:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:57:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:57:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:57:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:57:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:57:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:57:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:57:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:57:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:57:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:57:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:57:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:57:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:57:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:57:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:57:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:57:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:57:01 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:57:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:57:01 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:57:01 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:57:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:57:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:57:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:57:01 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:57:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:57:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:57:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:57:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:57:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:57:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:57:01 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:57:01 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:57:01 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:57:01 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:57:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:57:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17156 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:10 IQ138000 wb-watchdog[6985]: [INFO] Interval #101 started. Waiting up to 60 seconds for error...
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 07:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 07:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4204] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4225] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4238] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4402] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4441] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4443] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4652] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4725] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:57:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/75
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4755] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4757] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4758] Config: added 'scan_ssid' value '1'
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4759] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4760] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.4761] Config: added 'psk' value '<hidden>'
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.5483] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:57:23 IQ138000 NetworkManager[403]: <info>  [1760169443.5499] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:57:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:57:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:57:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:57:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:57:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:57:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:57:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:57:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:57:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:57:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:57:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:57:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:57:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:57:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:57:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:57:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:57:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:57:32 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:57:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:57:32 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:57:32 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:57:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:57:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:57:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:57:32 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:57:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:57:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:57:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:57:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:57:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:57:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:57:32 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:57:32 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:57:32 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:57:32 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:57:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:57:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:57:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:57:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:57:49 IQ138000 NetworkManager[403]: <warn>  [1760169469.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:57:49 IQ138000 NetworkManager[403]: <info>  [1760169469.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:57:49 IQ138000 NetworkManager[403]: <warn>  [1760169469.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:57:49 IQ138000 NetworkManager[403]: <info>  [1760169469.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:57:49 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:57:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/75
Oct 11 07:57:49 IQ138000 NetworkManager[403]: <info>  [1760169469.0747] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:57:49 IQ138000 NetworkManager[403]: <info>  [1760169469.0749] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:57:49 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 07:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:55 IQ138000 NetworkManager[403]: <info>  [1760169475.1900] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:58:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:58:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:58:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:58:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:58:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:58:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:58:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:58:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:58:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:58:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:58:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:58:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:58:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:58:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:58:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:58:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:58:02 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:58:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:58:02 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:58:02 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:58:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:58:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:58:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:58:02 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:58:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:58:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:58:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:58:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:58:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:58:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:58:02 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:58:02 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:58:02 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:58:02 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:58:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:58:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:10 IQ138000 wb-watchdog[7689]: [INFO] Interval #102 started. Waiting up to 60 seconds for error...
Oct 11 07:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 07:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:58:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:58:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8344 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:58:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:58:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:58:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:58:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:58:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:58:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:58:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:58:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:58:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:58:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:58:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:58:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:58:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:58:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:58:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:58:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:58:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:58:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:58:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:58:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:58:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:58:32 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:58:32 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:58:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:58:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:58:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:58:32 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:58:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:58:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:58:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:58:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:58:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:58:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:58:32 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:58:32 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:58:32 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:58:32 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 07:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7618] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7623] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7629] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7715] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7733] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7735] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7835] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7854] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7871] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7875] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7876] Config: added 'scan_ssid' value '1'
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7877] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7878] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 07:58:50 IQ138000 NetworkManager[403]: <info>  [1760169530.7879] Config: added 'psk' value '<hidden>'
Oct 11 07:58:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/76
Oct 11 07:58:53 IQ138000 NetworkManager[403]: <info>  [1760169533.8711] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 07:58:53 IQ138000 NetworkManager[403]: <info>  [1760169533.8739] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 07:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 07:59:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:59:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:59:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:59:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:59:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:59:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:59:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:59:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:59:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:59:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:59:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:59:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:59:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:59:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:59:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:59:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:59:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:59:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:59:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:59:02 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:59:02 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:59:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:59:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:59:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:59:02 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:59:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:59:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:59:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:59:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:59:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:59:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:59:02 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:59:02 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:59:02 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:59:02 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:59:09 IQ138000 npm[3801]: [2025-10-11 07:59:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.94,"last_seen":1760169549234,"linkquality":102,"power_outage_count":48745,"temperature":24.72,"voltage":3025}'
Oct 11 07:59:09 IQ138000 npm[3801]: [2025-10-11 07:59:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.08,"last_seen":1760169549248,"linkquality":102,"power_outage_count":48745,"temperature":24.72,"voltage":3025}'
Oct 11 07:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:10 IQ138000 wb-watchdog[8310]: [INFO] Interval #103 started. Waiting up to 60 seconds for error...
Oct 11 07:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:16 IQ138000 NetworkManager[403]: <warn>  [1760169556.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 07:59:16 IQ138000 NetworkManager[403]: <info>  [1760169556.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 07:59:16 IQ138000 NetworkManager[403]: <warn>  [1760169556.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 07:59:16 IQ138000 NetworkManager[403]: <info>  [1760169556.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 07:59:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/76
Oct 11 07:59:16 IQ138000 NetworkManager[403]: <info>  [1760169556.0648] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 07:59:16 IQ138000 NetworkManager[403]: <info>  [1760169556.0650] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 07:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:22 IQ138000 NetworkManager[403]: <info>  [1760169562.5582] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 07:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 07:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 07:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 07:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 07:59:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 07:59:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 07:59:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 07:59:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 07:59:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 07:59:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 07:59:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 07:59:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 07:59:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 07:59:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 07:59:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 07:59:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 07:59:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 07:59:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 07:59:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 07:59:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 07:59:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 07:59:32 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 07:59:32 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 07:59:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 07:59:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:59:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 07:59:32 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 07:59:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 07:59:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 07:59:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:59:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 07:59:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 07:59:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 07:59:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 07:59:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 07:59:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 07:59:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 07:59:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 07:59:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 07:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 07:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 07:59:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 07:59:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 07:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 07:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 07:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 07:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 07:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:00:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:00:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:00:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:00:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:00:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:00:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:00:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:00:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:00:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:00:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:00:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:00:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:00:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:00:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:00:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:00:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:00:03 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:00:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:00:03 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:00:03 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:00:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:00:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:00:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:00:03 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:00:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:00:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:00:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:00:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:00:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:00:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:00:03 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:00:03 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:00:03 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:00:03 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:10 IQ138000 wb-watchdog[9017]: [INFO] Interval #104 started. Waiting up to 60 seconds for error...
Oct 11 08:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:00:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:00:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0729] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0734] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0740] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0828] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0845] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0846] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0959] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.0986] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1003] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1007] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1008] Config: added 'scan_ssid' value '1'
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1009] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1010] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1011] Config: added 'psk' value '<hidden>'
Oct 11 08:00:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/77
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1818] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:00:18 IQ138000 NetworkManager[403]: <info>  [1760169618.1820] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:00:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:00:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:00:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:00:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:00:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:00:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:00:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:00:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:00:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:00:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:00:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:00:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:00:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:00:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:00:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:00:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:00:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:00:33 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:00:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:00:33 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:00:33 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:00:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:00:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:00:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:00:33 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:00:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:00:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:00:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:00:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:00:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:00:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:00:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:00:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:00:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:00:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:00:43 IQ138000 NetworkManager[403]: <warn>  [1760169643.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:00:43 IQ138000 NetworkManager[403]: <info>  [1760169643.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:00:43 IQ138000 NetworkManager[403]: <warn>  [1760169643.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:00:43 IQ138000 NetworkManager[403]: <info>  [1760169643.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:00:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/77
Oct 11 08:00:43 IQ138000 NetworkManager[403]: <info>  [1760169643.0665] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:00:43 IQ138000 NetworkManager[403]: <info>  [1760169643.0667] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:48 IQ138000 NetworkManager[403]: <info>  [1760169648.8522] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:00:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:00:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 08:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:01:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:01:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:01:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:01:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:01:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:01:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:01:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:01:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:01:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:01:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:01:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:01:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:01:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:01:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:01:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:01:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:01:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:01:03 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:01:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:01:03 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:01:03 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:01:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:01:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:01:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:01:03 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:01:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:01:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:01:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:01:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:01:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:01:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:01:03 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:01:03 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:01:03 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:01:03 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:10 IQ138000 wb-watchdog[9628]: [INFO] Interval #105 started. Waiting up to 60 seconds for error...
Oct 11 08:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 08:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12808 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:01:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:01:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:01:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:01:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:01:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:01:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:01:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:01:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:01:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:01:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:01:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:01:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:01:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:01:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:01:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:01:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:01:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:01:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:01:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:01:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:01:33 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:01:33 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:01:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:01:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:01:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:01:33 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:01:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:01:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:01:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:01:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:01:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:01:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:01:33 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:01:33 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:01:33 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:01:33 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L1, row count 7183, limit 7042
Oct 11 08:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:01:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:01:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2805] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2816] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2822] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2874] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2892] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2894] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.2982] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3004] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3023] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3026] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3027] Config: added 'scan_ssid' value '1'
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3028] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3030] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3030] Config: added 'psk' value '<hidden>'
Oct 11 08:01:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/78
Oct 11 08:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3726] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:01:44 IQ138000 NetworkManager[403]: <info>  [1760169704.3727] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:01:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:02:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:02:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:02:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:02:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:02:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:02:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:02:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:02:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:02:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:02:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:02:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:02:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:02:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:02:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:02:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:02:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:02:03 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:02:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:02:03 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:02:03 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:02:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:02:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:02:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:02:03 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:02:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:02:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:02:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:02:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:02:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:02:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:02:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:02:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:02:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:02:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:02:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:02:10 IQ138000 NetworkManager[403]: <warn>  [1760169730.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:02:10 IQ138000 NetworkManager[403]: <info>  [1760169730.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:02:10 IQ138000 NetworkManager[403]: <warn>  [1760169730.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:02:10 IQ138000 NetworkManager[403]: <info>  [1760169730.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:02:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:02:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/78
Oct 11 08:02:10 IQ138000 NetworkManager[403]: <info>  [1760169730.0623] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:02:10 IQ138000 NetworkManager[403]: <info>  [1760169730.0625] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:02:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:10 IQ138000 wb-watchdog[10330]: [INFO] Interval #106 started. Waiting up to 60 seconds for error...
Oct 11 08:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:02:16 IQ138000 NetworkManager[403]: <info>  [1760169736.0767] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:02:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:02:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:02:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:02:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:02:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:02:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:02:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:02:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:02:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:02:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:02:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:02:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:02:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:02:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:02:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:02:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:02:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:02:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:02:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:02:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:02:34 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:02:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:02:34 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:02:34 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:02:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:02:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:02:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:02:34 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:02:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:02:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:02:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:02:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:02:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:02:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:02:34 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:02:34 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:02:34 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:02:34 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:02:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:02:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:03:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:03:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:03:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:03:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:03:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:03:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:03:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:03:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:03:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:03:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:03:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:03:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:03:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:03:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:03:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:03:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:03:04 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:03:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:03:04 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:03:04 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:03:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:03:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:03:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:03:04 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:03:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:03:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:03:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:03:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:03:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:03:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:03:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:03:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:03:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:03:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:03:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:03:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:10 IQ138000 wb-watchdog[10944]: [INFO] Interval #107 started. Waiting up to 60 seconds for error...
Oct 11 08:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3020] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3070] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3086] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3188] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3209] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3211] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3302] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3323] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3342] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3346] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3347] Config: added 'scan_ssid' value '1'
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3348] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3349] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:03:11 IQ138000 NetworkManager[403]: <info>  [1760169791.3350] Config: added 'psk' value '<hidden>'
Oct 11 08:03:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/79
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:14 IQ138000 NetworkManager[403]: <info>  [1760169794.4179] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:03:14 IQ138000 NetworkManager[403]: <info>  [1760169794.4181] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:03:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:03:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:26 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 08:03:26 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 11 08:03:26 IQ138000 systemd[1]: data-handler.service: Consumed 31.340s CPU time.
Oct 11 08:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:03:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:03:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:03:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:03:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:03:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:03:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:03:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:03:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:03:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:03:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:03:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:03:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:03:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:03:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:03:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:03:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:03:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:03:34 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:03:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:03:34 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:03:34 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:03:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:03:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:03:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:03:34 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:03:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:03:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:03:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:03:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:03:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:03:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:03:34 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:03:34 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:03:34 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:03:34 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:03:37 IQ138000 NetworkManager[403]: <warn>  [1760169817.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:03:37 IQ138000 NetworkManager[403]: <info>  [1760169817.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:03:37 IQ138000 NetworkManager[403]: <warn>  [1760169817.0261] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:03:37 IQ138000 NetworkManager[403]: <info>  [1760169817.0277] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:03:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/79
Oct 11 08:03:37 IQ138000 NetworkManager[403]: <info>  [1760169817.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:03:37 IQ138000 NetworkManager[403]: <info>  [1760169817.0702] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:03:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:03:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:03:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:43 IQ138000 NetworkManager[403]: <info>  [1760169823.0842] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 08:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:46 IQ138000 npm[3801]: [2025-10-11 08:03:46] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.19,"last_seen":1760169826829,"linkquality":40,"power_outage_count":35250,"temperature":23.12,"voltage":3075}'
Oct 11 08:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:03:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:03:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:04:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:04:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:04:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:04:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:04:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:04:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:04:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:04:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:04:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:04:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:04:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:04:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:04:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:04:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:04:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:04:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:04:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:04:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:04:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:04:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:04:04 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:04:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:04:04 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:04:04 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:04:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:04:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:04:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:04:04 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:04:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:04:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:04:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:04:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:04:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:04:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:04:04 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:04:04 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:04:04 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:04:04 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:10 IQ138000 wb-watchdog[11647]: [INFO] Interval #108 started. Waiting up to 60 seconds for error...
Oct 11 08:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:04:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:04:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16936 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:04:26 IQ138000 systemd[1]: data-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 08:04:26 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 11 08:04:26 IQ138000 systemd[1]: data-handler.service: Consumed 31.340s CPU time.
Oct 11 08:04:26 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 08:04:26 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 08:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:04:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:04:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:04:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:04:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:04:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:04:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:04:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:04:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:04:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:04:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:04:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:04:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:04:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:04:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:04:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:04:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:04:34 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:04:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:04:34 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:04:34 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:04:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:04:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:04:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:04:34 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:04:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:04:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:04:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:04:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:04:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:04:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:04:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:04:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:04:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:04:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:04:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:04:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3512] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3525] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3531] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3586] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3609] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3611] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3710] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3730] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3746] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3749] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3750] Config: added 'scan_ssid' value '1'
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3751] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3752] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.3753] Config: added 'psk' value '<hidden>'
Oct 11 08:04:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/80
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.4634] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:04:38 IQ138000 NetworkManager[403]: <info>  [1760169878.4636] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:01 IQ138000 CRON[12174]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:05:01 IQ138000 CRON[12178]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 08:05:01 IQ138000 CRON[12174]: pam_unix(cron:session): session closed for user root
Oct 11 08:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:04 IQ138000 NetworkManager[403]: <warn>  [1760169904.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:05:04 IQ138000 NetworkManager[403]: <info>  [1760169904.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:05:04 IQ138000 NetworkManager[403]: <warn>  [1760169904.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:05:04 IQ138000 NetworkManager[403]: <info>  [1760169904.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:05:04 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:05:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/80
Oct 11 08:05:04 IQ138000 NetworkManager[403]: <info>  [1760169904.0712] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:05:04 IQ138000 NetworkManager[403]: <info>  [1760169904.0714] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:04 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:05:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:05:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:05:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:05:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:05:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:05:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:05:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:05:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:05:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:05:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:05:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:05:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:05:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:05:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:05:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:05:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:05:05 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:05:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:05:05 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:05:05 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:05:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:05:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:05:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:05:05 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:05:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:05:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:05:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:05:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:05:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:05:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:05:05 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:05:05 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:05:05 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:05:05 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:10 IQ138000 NetworkManager[403]: <info>  [1760169910.1132] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:05:10 IQ138000 wb-watchdog[12275]: [INFO] Interval #109 started. Waiting up to 60 seconds for error...
Oct 11 08:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:05:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:05:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:05:17 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L1, row count 7183, limit 7042
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:05:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:05:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:05:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:05:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:05:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:05:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:05:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:05:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:05:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:05:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:05:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:05:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:05:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:05:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:05:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:05:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:05:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:05:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:05:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:05:35 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:05:35 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:05:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:05:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:05:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:05:35 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:05:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:05:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:05:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:05:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:05:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:05:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:05:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:05:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:05:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:05:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:05:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:05:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.4670] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.4677] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.4716] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.4796] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.4836] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.4853] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:06:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5060] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5096] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5140] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5158] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5171] Config: added 'scan_ssid' value '1'
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5181] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5192] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:06:05 IQ138000 NetworkManager[403]: <info>  [1760169965.5206] Config: added 'psk' value '<hidden>'
Oct 11 08:06:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/81
Oct 11 08:06:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:06:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:06:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:06:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:06:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:06:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:06:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:06:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:06:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:06:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:06:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:06:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:06:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:06:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:06:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:06:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:06:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:06:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:06:05 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:06:05 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:06:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:06:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:06:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:06:05 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:06:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:06:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:06:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:06:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:06:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:06:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:06:05 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:06:05 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:06:05 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:06:05 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:08 IQ138000 NetworkManager[403]: <info>  [1760169968.5938] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:06:08 IQ138000 NetworkManager[403]: <info>  [1760169968.5959] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:06:10 IQ138000 wb-watchdog[12988]: [INFO] Interval #110 started. Waiting up to 60 seconds for error...
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:06:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:06:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12808 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:31 IQ138000 NetworkManager[403]: <warn>  [1760169991.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:06:31 IQ138000 NetworkManager[403]: <info>  [1760169991.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:06:31 IQ138000 NetworkManager[403]: <warn>  [1760169991.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:06:31 IQ138000 NetworkManager[403]: <info>  [1760169991.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:06:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/81
Oct 11 08:06:31 IQ138000 NetworkManager[403]: <info>  [1760169991.0671] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:06:31 IQ138000 NetworkManager[403]: <info>  [1760169991.0673] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:06:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:06:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:06:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:06:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:06:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:06:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:06:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:06:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:06:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:06:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:06:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:06:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:06:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:06:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:06:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:06:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:06:35 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:06:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:06:35 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:06:35 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:06:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:06:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:06:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:06:35 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:06:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:06:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:06:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:06:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:06:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:06:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:06:35 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:06:35 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:06:35 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:06:35 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:06:37 IQ138000 NetworkManager[403]: <info>  [1760169997.2549] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:06:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:06:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:07:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:07:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:07:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:07:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:07:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:07:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:07:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:07:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:07:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:07:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:07:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:07:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:07:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:07:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:07:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:07:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:07:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:07:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:07:06 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:07:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:07:06 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:07:06 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:07:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:07:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:07:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:07:06 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:07:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:07:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:07:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:07:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:07:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:07:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:07:06 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:07:06 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:07:06 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:07:06 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:10 IQ138000 wb-watchdog[13580]: [INFO] Interval #111 started. Waiting up to 60 seconds for error...
Oct 11 08:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 08:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:07:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:07:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5137] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5156] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5162] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5281] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5323] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5339] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5484] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5506] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5525] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5528] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5529] Config: added 'scan_ssid' value '1'
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5530] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5531] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.5532] Config: added 'psk' value '<hidden>'
Oct 11 08:07:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/82
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.6222] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:07:32 IQ138000 NetworkManager[403]: <info>  [1760170052.6224] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:07:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:07:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:07:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:07:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:07:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:07:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:07:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:07:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:07:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:07:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:07:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:07:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:07:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:07:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:07:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:07:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:07:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:07:36 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:07:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:07:36 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:07:36 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:07:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:07:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:07:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:07:36 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:07:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:07:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:07:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:07:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:07:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:07:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:07:36 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:07:36 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:07:36 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:07:36 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:07:58 IQ138000 NetworkManager[403]: <warn>  [1760170078.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:07:58 IQ138000 NetworkManager[403]: <info>  [1760170078.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:07:58 IQ138000 NetworkManager[403]: <warn>  [1760170078.0284] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:07:58 IQ138000 NetworkManager[403]: <info>  [1760170078.0292] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:07:58 IQ138000 NetworkManager[403]: <info>  [1760170078.0296] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:07:58 IQ138000 NetworkManager[403]: <info>  [1760170078.0341] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:07:58 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:07:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/82
Oct 11 08:07:58 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:01 IQ138000 CRON[14214]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:08:01 IQ138000 CRON[14218]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 08:08:03 IQ138000 sSMTP[14241]: Unable to locate mail
Oct 11 08:08:03 IQ138000 cron[14241]: sendmail: Cannot open mail:25
Oct 11 08:08:03 IQ138000 sSMTP[14241]: Cannot open mail:25
Oct 11 08:08:03 IQ138000 CRON[14214]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 08:08:03 IQ138000 CRON[14214]: pam_unix(cron:session): session closed for user root
Oct 11 08:08:04 IQ138000 NetworkManager[403]: <info>  [1760170084.2576] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:08:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:08:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:08:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:08:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:08:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:08:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:08:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:08:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:08:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:08:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:08:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:08:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:08:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:08:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:08:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:08:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:08:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:08:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:08:06 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:08:06 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:08:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:08:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:08:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:08:06 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:08:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:08:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:08:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:08:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:08:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:08:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:08:06 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:08:06 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:08:06 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:08:06 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:08 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:10 IQ138000 wb-watchdog[14314]: [INFO] Interval #112 started. Waiting up to 60 seconds for error...
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:08:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:08:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:08:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:08:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:08:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:08:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:08:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:08:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:08:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:08:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:08:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:08:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:08:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:08:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:08:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:08:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:08:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:08:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:08:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:08:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:08:36 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:08:36 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:08:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:08:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:08:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:08:36 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:08:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:08:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:08:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:08:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:08:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:08:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:08:36 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:08:36 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:08:36 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:08:36 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5445] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5450] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5455] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5504] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5522] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5525] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5616] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5636] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5654] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5657] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5659] Config: added 'scan_ssid' value '1'
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5660] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5661] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:08:59 IQ138000 NetworkManager[403]: <info>  [1760170139.5662] Config: added 'psk' value '<hidden>'
Oct 11 08:08:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/83
Oct 11 08:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:02 IQ138000 NetworkManager[403]: <info>  [1760170142.6476] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:09:02 IQ138000 NetworkManager[403]: <info>  [1760170142.6478] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:09:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:09:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:09:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:09:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:09:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:09:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:09:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:09:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:09:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:09:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:09:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:09:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:09:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:09:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:09:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:09:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:09:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:09:06 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:09:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:09:06 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:09:06 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:09:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:09:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:09:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:09:06 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:09:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:09:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:09:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:09:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:09:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:09:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:09:06 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:09:06 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:09:06 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:09:06 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:10 IQ138000 wb-watchdog[14923]: [INFO] Interval #113 started. Waiting up to 60 seconds for error...
Oct 11 08:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:09:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:09:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:25 IQ138000 NetworkManager[403]: <warn>  [1760170165.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:09:25 IQ138000 NetworkManager[403]: <info>  [1760170165.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:09:25 IQ138000 NetworkManager[403]: <warn>  [1760170165.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:09:25 IQ138000 NetworkManager[403]: <info>  [1760170165.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:09:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/83
Oct 11 08:09:25 IQ138000 NetworkManager[403]: <info>  [1760170165.0737] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:09:25 IQ138000 NetworkManager[403]: <info>  [1760170165.0739] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:09:31 IQ138000 NetworkManager[403]: <info>  [1760170171.3040] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:09:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:09:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:09:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:09:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:09:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:09:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:09:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:09:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:09:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:09:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:09:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:09:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:09:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:09:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:09:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:09:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:09:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:09:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:09:37 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:09:37 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:09:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:09:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:09:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:09:37 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:09:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:09:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:09:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:09:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:09:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:09:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:09:37 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:09:37 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:09:37 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:09:37 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:09:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:09:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:10:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:10:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:10:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:10:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:10:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:10:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:10:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:10:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:10:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:10:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:10:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:10:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:10:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:10:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:10:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:10:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:10:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:10:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:10:07 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:10:07 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:10:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:10:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:10:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:10:07 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:10:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:10:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:10:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:10:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:10:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:10:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:10:07 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:10:07 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:10:07 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:10:07 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:10 IQ138000 wb-watchdog[15617]: [INFO] Interval #114 started. Waiting up to 60 seconds for error...
Oct 11 08:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 08:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6458] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6462] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6476] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6531] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6550] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6552] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6634] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6656] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6675] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6679] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6680] Config: added 'scan_ssid' value '1'
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6681] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6682] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.6683] Config: added 'psk' value '<hidden>'
Oct 11 08:10:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/84
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.7408] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:10:26 IQ138000 NetworkManager[403]: <info>  [1760170226.7410] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:10:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:10:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:10:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:10:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:10:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:10:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:10:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:10:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:10:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:10:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:10:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:10:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:10:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:10:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:10:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:10:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:10:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:10:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:10:37 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:10:37 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:10:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:10:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:10:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:10:37 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:10:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:10:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:10:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:10:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:10:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:10:37 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:10:37 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:10:37 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:10:37 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:52 IQ138000 NetworkManager[403]: <warn>  [1760170252.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:10:52 IQ138000 NetworkManager[403]: <info>  [1760170252.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:10:52 IQ138000 NetworkManager[403]: <warn>  [1760170252.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:10:52 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:10:52 IQ138000 NetworkManager[403]: <info>  [1760170252.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:10:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/84
Oct 11 08:10:52 IQ138000 NetworkManager[403]: <info>  [1760170252.0693] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:10:52 IQ138000 NetworkManager[403]: <info>  [1760170252.0694] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:10:52 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:10:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:10:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:10:58 IQ138000 NetworkManager[403]: <info>  [1760170258.4292] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:11:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:11:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:11:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:11:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:11:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:11:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:11:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:11:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:11:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:11:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:11:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:11:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:11:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:11:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:11:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:11:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:11:07 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:11:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:11:07 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:11:07 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:11:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:11:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:11:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:11:07 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:11:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:11:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:11:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:11:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:11:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:11:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:11:07 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:11:07 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:11:07 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:11:07 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:10 IQ138000 wb-watchdog[16237]: [INFO] Interval #115 started. Waiting up to 60 seconds for error...
Oct 11 08:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:11:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:11:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:11:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:11:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:11:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:11:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:11:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:11:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:11:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:11:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:11:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:11:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:11:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:11:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:11:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:11:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:11:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:11:37 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:11:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:11:37 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:11:37 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:11:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:11:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:11:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:11:37 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:11:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:11:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:11:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:11:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:11:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:11:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:11:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:11:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:11:38 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:11:38 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:11:38 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:11:38 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:42 IQ138000 npm[3801]: [2025-10-11 08:11:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.08,"last_seen":1760170302253,"linkquality":76,"power_outage_count":48745,"temperature":24.21,"voltage":3025}'
Oct 11 08:11:42 IQ138000 npm[3801]: [2025-10-11 08:11:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.45,"last_seen":1760170302268,"linkquality":80,"power_outage_count":48745,"temperature":24.21,"voltage":3025}'
Oct 11 08:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7548] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7553] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7559] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7631] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7658] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7661] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7772] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7806] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7845] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7849] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7850] Config: added 'scan_ssid' value '1'
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7851] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7863] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:11:53 IQ138000 NetworkManager[403]: <info>  [1760170313.7864] Config: added 'psk' value '<hidden>'
Oct 11 08:11:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/85
Oct 11 08:11:56 IQ138000 NetworkManager[403]: <info>  [1760170316.8615] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:11:56 IQ138000 NetworkManager[403]: <info>  [1760170316.8618] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:12:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:12:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:12:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:12:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:12:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:12:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:12:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:12:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:12:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:12:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:12:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:12:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:12:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:12:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:12:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:12:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:12:08 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:12:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:12:08 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:12:08 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:12:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:12:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:12:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:12:08 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:12:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:12:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:12:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:12:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:12:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:12:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:12:08 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:12:08 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:12:08 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:12:08 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:10 IQ138000 wb-watchdog[16929]: [INFO] Interval #116 started. Waiting up to 60 seconds for error...
Oct 11 08:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 08:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:19 IQ138000 NetworkManager[403]: <warn>  [1760170339.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:12:19 IQ138000 NetworkManager[403]: <info>  [1760170339.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:12:19 IQ138000 NetworkManager[403]: <warn>  [1760170339.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:12:19 IQ138000 NetworkManager[403]: <info>  [1760170339.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:12:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/85
Oct 11 08:12:19 IQ138000 NetworkManager[403]: <info>  [1760170339.0692] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:12:19 IQ138000 NetworkManager[403]: <info>  [1760170339.0694] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:25 IQ138000 NetworkManager[403]: <info>  [1760170345.5303] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:12:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:12:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:12:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:12:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:12:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:12:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:12:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:12:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:12:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:12:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:12:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:12:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:12:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:12:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:12:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:12:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:12:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:12:38 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:12:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:12:38 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:12:38 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:12:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:12:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:12:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:12:38 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:12:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:12:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:12:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:12:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:12:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:12:38 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:12:38 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:12:38 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:12:38 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 08:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L1, row count 7183, limit 7042
Oct 11 08:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_16/External Sensor 1, row count 7183, limit 7042
Oct 11 08:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:13:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:13:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:13:07 IQ138000 npm[3801]: [2025-10-11 08:13:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.45,"last_seen":1760170387810,"linkquality":98,"power_outage_count":48745,"temperature":24.28,"voltage":3025}'
Oct 11 08:13:07 IQ138000 npm[3801]: [2025-10-11 08:13:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.51,"last_seen":1760170387834,"linkquality":102,"power_outage_count":48745,"temperature":24.28,"voltage":3025}'
Oct 11 08:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:13:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:13:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:13:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:13:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:13:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:13:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:13:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:13:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:13:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:13:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:13:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:13:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:13:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:13:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:13:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:13:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:13:08 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:13:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:13:08 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:13:08 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:13:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:13:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:13:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:13:08 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:13:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:13:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:13:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:13:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:13:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:13:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:13:08 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:13:08 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:13:08 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:13:08 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:11 IQ138000 wb-watchdog[17558]: [INFO] Interval #117 started. Waiting up to 60 seconds for error...
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:13:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.8847] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.8852] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.8862] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.8918] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.8945] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.8947] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9034] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9052] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9068] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9071] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9072] Config: added 'scan_ssid' value '1'
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9073] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9074] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9075] Config: added 'psk' value '<hidden>'
Oct 11 08:13:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/86
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9797] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:13:20 IQ138000 NetworkManager[403]: <info>  [1760170400.9800] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:13:26 IQ138000 lsyncd[6566]: 08:13:26 Normal: Calling rsync with filter-list of new/modified files/dirs
Oct 11 08:13:26 IQ138000 lsyncd[6566]: /data-handler/20251011-061910000.txt
Oct 11 08:13:26 IQ138000 lsyncd[6566]: /data-handler/
Oct 11 08:13:26 IQ138000 lsyncd[6566]: /
Oct 11 08:13:26 IQ138000 lsyncd[6566]: /data-handler/20251011-080426000.txt
Oct 11 08:13:26 IQ138000 lsyncd[6566]: /data-handler/20251011-061302000.txt
Oct 11 08:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:27 IQ138000 lsyncd[6566]: 08:13:27 Normal: Finished (list): 0
Oct 11 08:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:13:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:13:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:13:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:13:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:13:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:13:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:13:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:13:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:13:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:13:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:13:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:13:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:13:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:13:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:13:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:13:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:13:38 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:13:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:13:38 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:13:38 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:13:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:13:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:13:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:13:38 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:13:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:13:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:13:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:13:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:13:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:13:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:13:38 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:13:38 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:13:38 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:13:38 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:13:46 IQ138000 NetworkManager[403]: <warn>  [1760170426.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:13:46 IQ138000 NetworkManager[403]: <info>  [1760170426.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:13:46 IQ138000 NetworkManager[403]: <warn>  [1760170426.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:13:46 IQ138000 NetworkManager[403]: <info>  [1760170426.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:13:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/86
Oct 11 08:13:46 IQ138000 NetworkManager[403]: <info>  [1760170426.0804] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:13:46 IQ138000 NetworkManager[403]: <info>  [1760170426.0806] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:13:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:51 IQ138000 NetworkManager[403]: <info>  [1760170431.6708] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:14:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:14:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:14:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:14:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:14:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:14:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:14:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:14:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:14:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:14:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:14:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:14:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:14:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:14:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:14:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:14:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:14:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:14:09 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:14:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:14:09 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:14:09 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:14:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:14:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:14:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:14:09 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:14:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:14:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:14:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:14:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:14:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:14:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:14:09 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:14:09 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:14:09 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:14:09 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:14:11 IQ138000 wb-watchdog[18276]: [INFO] Interval #118 started. Waiting up to 60 seconds for error...
Oct 11 08:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:14:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:14:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:14:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:14:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:14:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:14:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:14:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:14:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:14:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:14:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:14:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:14:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:14:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:14:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:14:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:14:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:14:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:14:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:14:39 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:14:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:14:39 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:14:39 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:14:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:14:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:14:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:14:39 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:14:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:14:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:14:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:14:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:14:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:14:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:14:39 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:14:39 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:14:39 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:14:39 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9440] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9445] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9450] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9506] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9525] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9527] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9629] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9648] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9666] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9669] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9670] Config: added 'scan_ssid' value '1'
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9671] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9672] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:14:46 IQ138000 NetworkManager[403]: <info>  [1760170486.9673] Config: added 'psk' value '<hidden>'
Oct 11 08:14:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/87
Oct 11 08:14:47 IQ138000 NetworkManager[403]: <info>  [1760170487.0375] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:14:47 IQ138000 NetworkManager[403]: <info>  [1760170487.0377] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:14:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L3, row count 7183, limit 7042
Oct 11 08:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:14:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:14:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:01 IQ138000 CRON[18779]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:15:01 IQ138000 CRON[18783]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 08:15:01 IQ138000 CRON[18779]: pam_unix(cron:session): session closed for user root
Oct 11 08:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:15:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:15:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:15:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:15:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:15:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:15:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:15:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:15:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:15:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:15:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:15:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:15:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:15:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:15:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:15:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:15:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:15:09 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:15:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:15:09 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:15:09 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:15:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:15:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:15:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:15:09 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:15:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:15:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:15:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:15:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:15:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:15:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:15:09 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:15:09 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:15:09 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:15:09 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:11 IQ138000 wb-watchdog[18878]: [INFO] Interval #119 started. Waiting up to 60 seconds for error...
Oct 11 08:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 NetworkManager[403]: <warn>  [1760170512.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:15:12 IQ138000 NetworkManager[403]: <info>  [1760170512.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:15:12 IQ138000 NetworkManager[403]: <warn>  [1760170512.0368] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:15:12 IQ138000 NetworkManager[403]: <info>  [1760170512.0397] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:15:12 IQ138000 NetworkManager[403]: <info>  [1760170512.0400] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:15:12 IQ138000 NetworkManager[403]: <info>  [1760170512.0513] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:15:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/87
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:17 IQ138000 NetworkManager[403]: <info>  [1760170517.9181] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:15:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:15:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:15:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:15:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:15:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:15:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:15:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:15:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:15:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:15:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:15:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:15:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:15:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:15:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:15:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:15:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:15:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:15:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:15:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:15:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:15:39 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:15:39 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:15:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:15:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:15:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:15:39 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:15:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:15:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:15:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:15:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:15:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:15:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:15:39 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:15:39 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:15:39 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:15:39 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:15:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:15:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:16:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:16:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:16:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:16:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:16:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:16:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:16:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:16:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:16:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:16:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:16:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:16:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:16:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:16:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:16:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:16:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:16:09 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:16:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:16:09 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:16:09 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:16:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:16:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:16:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:16:09 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:16:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:16:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:16:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:16:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:16:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:16:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:16:09 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:16:09 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:16:09 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:16:09 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:16:11 IQ138000 wb-watchdog[19595]: [INFO] Interval #120 started. Waiting up to 60 seconds for error...
Oct 11 08:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2418] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2434] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2441] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2496] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2524] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2525] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2623] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2645] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2662] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2664] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2665] Config: added 'scan_ssid' value '1'
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2666] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2667] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.2668] Config: added 'psk' value '<hidden>'
Oct 11 08:16:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/88
Oct 11 08:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.3356] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:16:13 IQ138000 NetworkManager[403]: <info>  [1760170573.3358] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:16:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:16:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:38 IQ138000 NetworkManager[403]: <warn>  [1760170598.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:16:38 IQ138000 NetworkManager[403]: <info>  [1760170598.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:16:38 IQ138000 NetworkManager[403]: <warn>  [1760170598.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:16:38 IQ138000 NetworkManager[403]: <info>  [1760170598.0251] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:16:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/88
Oct 11 08:16:38 IQ138000 NetworkManager[403]: <info>  [1760170598.0704] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:16:38 IQ138000 NetworkManager[403]: <info>  [1760170598.0706] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:16:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:16:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:16:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:16:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:16:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:16:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:16:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:16:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:16:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:16:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:16:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:16:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:16:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:16:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:16:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:16:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:16:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:16:40 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:16:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:16:40 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:16:40 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:16:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:16:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:16:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:16:40 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:16:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:16:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:16:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:16:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:16:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:16:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:16:40 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:16:40 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:16:40 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:16:40 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:16:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:16:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:44 IQ138000 NetworkManager[403]: <info>  [1760170604.0116] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:16:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:16:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:01 IQ138000 CRON[20099]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:17:01 IQ138000 CRON[20103]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 08:17:01 IQ138000 CRON[20099]: pam_unix(cron:session): session closed for user root
Oct 11 08:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:17:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:17:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:17:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:17:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:17:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:17:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:17:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:17:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:17:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:17:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:17:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:17:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:17:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:17:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:17:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:17:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:17:10 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:17:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:17:10 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:17:10 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:17:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:17:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:17:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:17:10 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:17:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:17:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:17:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:17:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:17:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:17:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:17:10 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:17:10 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:17:10 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:17:10 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:17:11 IQ138000 wb-watchdog[20204]: [INFO] Interval #121 started. Waiting up to 60 seconds for error...
Oct 11 08:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:17:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:17:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L3, row count 7183, limit 7042
Oct 11 08:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.4989] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.4994] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5002] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5077] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5095] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5097] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5238] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5258] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5282] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5285] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5286] Config: added 'scan_ssid' value '1'
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5287] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5288] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5289] Config: added 'psk' value '<hidden>'
Oct 11 08:17:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/89
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5980] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:17:39 IQ138000 NetworkManager[403]: <info>  [1760170659.5985] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:17:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:17:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:17:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:17:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:17:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:17:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:17:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:17:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:17:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:17:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:17:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:17:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:17:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:17:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:17:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:17:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:17:40 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:17:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:17:40 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:17:40 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:17:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:17:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:17:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:17:40 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:17:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:17:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:17:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:17:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:17:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:17:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:17:40 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:17:40 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:17:40 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:17:40 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:04 IQ138000 npm[3801]: [2025-10-11 08:18:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.51,"last_seen":1760170684151,"linkquality":102,"power_outage_count":48745,"temperature":24.46,"voltage":3025}'
Oct 11 08:18:04 IQ138000 npm[3801]: [2025-10-11 08:18:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.49,"last_seen":1760170684167,"linkquality":105,"power_outage_count":48745,"temperature":24.46,"voltage":3025}'
Oct 11 08:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:05 IQ138000 NetworkManager[403]: <warn>  [1760170685.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:18:05 IQ138000 NetworkManager[403]: <info>  [1760170685.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:18:05 IQ138000 NetworkManager[403]: <warn>  [1760170685.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:18:05 IQ138000 NetworkManager[403]: <info>  [1760170685.0252] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:18:05 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:18:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/89
Oct 11 08:18:05 IQ138000 NetworkManager[403]: <info>  [1760170685.0659] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:18:05 IQ138000 NetworkManager[403]: <info>  [1760170685.0661] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:05 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:18:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:18:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:18:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:18:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:18:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:18:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:18:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:18:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:18:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:18:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:18:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:18:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:18:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:18:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:18:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:18:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:18:10 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:18:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:18:10 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:18:10 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:18:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:18:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:18:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:18:10 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:18:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:18:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:18:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:18:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:18:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:18:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:18:10 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:18:10 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:18:10 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:18:10 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:18:11 IQ138000 wb-watchdog[20917]: [INFO] Interval #122 started. Waiting up to 60 seconds for error...
Oct 11 08:18:11 IQ138000 NetworkManager[403]: <info>  [1760170691.2696] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:18:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:18:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:18:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:18:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:18:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:18:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:18:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:18:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:18:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:18:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:18:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:18:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:18:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:18:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:18:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:18:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:18:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:18:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:18:40 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:18:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:18:40 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:18:40 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:18:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:18:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:18:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:18:40 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:18:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:18:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:18:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:18:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:18:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:18:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:18:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:18:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:18:41 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:18:41 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:18:41 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:18:41 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:18:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:18:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:18:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L1, row count 7183, limit 7042
Oct 11 08:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5620] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5625] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5631] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5688] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5709] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5711] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5795] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5817] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5834] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5837] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5838] Config: added 'scan_ssid' value '1'
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5839] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5840] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:19:06 IQ138000 NetworkManager[403]: <info>  [1760170746.5841] Config: added 'psk' value '<hidden>'
Oct 11 08:19:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/90
Oct 11 08:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:09 IQ138000 NetworkManager[403]: <info>  [1760170749.6685] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:19:09 IQ138000 NetworkManager[403]: <info>  [1760170749.6687] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:19:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:19:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:19:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:19:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:19:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:19:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:19:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:19:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:19:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:19:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:19:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:19:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:19:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:19:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:19:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:19:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:19:11 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:19:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:19:11 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:19:11 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:19:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:19:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:19:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:19:11 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:19:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:19:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:19:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:19:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:19:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:19:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:19:11 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:19:11 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:19:11 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:19:11 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:19:11 IQ138000 wb-watchdog[21540]: [INFO] Interval #123 started. Waiting up to 60 seconds for error...
Oct 11 08:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:32 IQ138000 NetworkManager[403]: <warn>  [1760170772.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:19:32 IQ138000 NetworkManager[403]: <info>  [1760170772.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:19:32 IQ138000 NetworkManager[403]: <warn>  [1760170772.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:19:32 IQ138000 NetworkManager[403]: <info>  [1760170772.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:19:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/90
Oct 11 08:19:32 IQ138000 NetworkManager[403]: <info>  [1760170772.0703] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:19:32 IQ138000 NetworkManager[403]: <info>  [1760170772.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0004450311/voltage, row count 7183, limit 7042
Oct 11 08:19:38 IQ138000 NetworkManager[403]: <info>  [1760170778.3440] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:19:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:19:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:19:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:19:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:19:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:19:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:19:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:19:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:19:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:19:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:19:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:19:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:19:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:19:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:19:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:19:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:19:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:19:41 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:19:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:19:41 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:19:41 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:19:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:19:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:19:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:19:41 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:19:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:19:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:19:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:19:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:19:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:19:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:19:41 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:19:41 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:19:41 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:19:41 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:20:11 IQ138000 wb-watchdog[22227]: [INFO] Interval #124 started. Waiting up to 60 seconds for error...
Oct 11 08:20:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:20:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:20:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:20:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:20:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:20:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:20:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:20:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:20:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:20:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:20:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:20:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:20:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:20:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:20:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:20:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:20:11 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:20:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:20:11 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:20:11 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:20:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:20:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:20:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:20:11 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:20:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:20:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:20:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:20:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:20:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:20:11 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:20:11 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:20:11 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:20:11 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:20:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:20:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:20:19 IQ138000 npm[3801]: [2025-10-11 08:20:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.49,"last_seen":1760170819899,"linkquality":116,"power_outage_count":48745,"temperature":24.39,"voltage":3025}'
Oct 11 08:20:19 IQ138000 npm[3801]: [2025-10-11 08:20:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.57,"last_seen":1760170819911,"linkquality":116,"power_outage_count":48745,"temperature":24.39,"voltage":3025}'
Oct 11 08:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7468] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7479] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7495] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7566] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7582] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7584] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7671] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7694] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7716] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7719] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7720] Config: added 'scan_ssid' value '1'
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7721] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7722] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.7723] Config: added 'psk' value '<hidden>'
Oct 11 08:20:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/91
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.8516] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:20:33 IQ138000 NetworkManager[403]: <info>  [1760170833.8518] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:20:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:20:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:20:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:20:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:20:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:20:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:20:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:20:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:20:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:20:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:20:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:20:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:20:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:20:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:20:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:20:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:20:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:20:41 IQ138000 python3[2000]:            |       signal quality: 96% (recent)
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:20:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:20:41 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:20:41 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:20:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:20:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:20:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:20:41 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:20:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:20:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:20:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:20:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:20:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:20:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:20:41 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:20:41 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:20:41 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:20:41 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:20:59 IQ138000 NetworkManager[403]: <warn>  [1760170859.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:20:59 IQ138000 NetworkManager[403]: <info>  [1760170859.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:20:59 IQ138000 NetworkManager[403]: <warn>  [1760170859.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:20:59 IQ138000 NetworkManager[403]: <info>  [1760170859.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:20:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/91
Oct 11 08:20:59 IQ138000 NetworkManager[403]: <info>  [1760170859.0692] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:20:59 IQ138000 NetworkManager[403]: <info>  [1760170859.0694] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:21:05 IQ138000 NetworkManager[403]: <info>  [1760170865.5378] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:21:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:21:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:21:11 IQ138000 wb-watchdog[22833]: [INFO] Interval #125 started. Waiting up to 60 seconds for error...
Oct 11 08:21:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:21:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:21:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:21:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:21:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:21:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:21:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:21:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:21:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:21:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:21:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:21:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:21:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:21:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:21:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:21:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:21:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:21:12 IQ138000 python3[2000]:            |       signal quality: 93% (recent)
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:21:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:21:12 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:21:12 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:21:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:21:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:21:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:21:12 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:21:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:21:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:21:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:21:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:21:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:21:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:21:12 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:21:12 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:21:12 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:21:12 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:21:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:21:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:21:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:21:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:21:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:21:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 11 08:21:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:21:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:21:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:21:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:21:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:21:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:21:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:21:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:21:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:21:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:21:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:21:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:21:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:21:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:21:42 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:21:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:21:42 IQ138000 python3[2000]:            |          operator id: 25099
Oct 11 08:21:42 IQ138000 python3[2000]:            |        operator name: beeline
Oct 11 08:21:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:21:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:21:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 11 08:21:42 IQ138000 python3[2000]:            |                       slot 2: none
Oct 11 08:21:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 11 08:21:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:21:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 11 08:21:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 11 08:21:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:21:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:21:42 IQ138000 python3[2000]:              |              imsi: 250997340491874
Oct 11 08:21:42 IQ138000 python3[2000]:              |             iccid: 8970199210429593744
Oct 11 08:21:42 IQ138000 python3[2000]:              |       operator id: 25099
Oct 11 08:21:42 IQ138000 python3[2000]:              |     operator name: Beeline
Oct 11 08:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:43 IQ138000 NetworkManager[403]: <info>  [1760170903.0693] device (ttyUSB1): state change: activated -> deactivating (reason 'user-requested', sys-iface-state: 'managed')
Oct 11 08:21:43 IQ138000 NetworkManager[403]: <info>  [1760170903.0720] manager: NetworkManager state is now DISCONNECTING
Oct 11 08:21:43 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 08:21:43 IQ138000 NetworkManager[403]: <info>  [1760170903.0929] audit: op="connection-deactivate" uuid="5d4297ba-c319-4c05-a153-17cb42e6e196" name="wb-gsm-sim1" pid=8646 uid=0 result="success"
Oct 11 08:21:43 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 08:21:43 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 08:21:43 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 08:21:43 IQ138000 pppd[8539]: Terminating on signal 15
Oct 11 08:21:43 IQ138000 pppd[8539]: nm-ppp-plugin: status 10 / phase 'terminate'
Oct 11 08:21:43 IQ138000 NetworkManager[8539]: Terminating on signal 15
Oct 11 08:21:43 IQ138000 NetworkManager[8539]: Connect time 120.0 minutes.
Oct 11 08:21:43 IQ138000 NetworkManager[8539]: Sent 4539670 bytes, received 2752119 bytes.
Oct 11 08:21:43 IQ138000 NetworkManager[8539]: Connection terminated.
Oct 11 08:21:43 IQ138000 pppd[8539]: Connect time 120.0 minutes.
Oct 11 08:21:43 IQ138000 pppd[8539]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 08:21:43 IQ138000 pppd[8539]: Sent 4539670 bytes, received 2752119 bytes.
Oct 11 08:21:43 IQ138000 pppd[8539]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 08:21:43 IQ138000 dbus-daemon[298]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.6" (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.132" (uid=0 pid=8539 comm="/usr/sbin/pppd nodetach lock nodefaultroute noipv6")
Oct 11 08:21:43 IQ138000 NetworkManager[403]: <info>  [1760170903.2216] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 08:21:43 IQ138000 pppd[8539]: Connection terminated.
Oct 11 08:21:43 IQ138000 pppd[8539]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 11 08:21:43 IQ138000 avahi-daemon[364]: Withdrawing workstation service for ppp0.
Oct 11 08:21:43 IQ138000 ModemManager[469]: <info>  [modem2] state changed (connected -> disconnecting)
Oct 11 08:21:43 IQ138000 dbus-daemon[298]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.6" (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.132" (uid=0 pid=8539 comm="/usr/sbin/pppd nodetach lock nodefaultroute noipv6")
Oct 11 08:21:43 IQ138000 dbus-daemon[298]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.6" (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.132" (uid=0 pid=8539 comm="/usr/sbin/pppd nodetach lock nodefaultroute noipv6")
Oct 11 08:21:43 IQ138000 dbus-daemon[298]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.6" (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.132" (uid=0 pid=8539 comm="/usr/sbin/pppd nodetach lock nodefaultroute noipv6")
Oct 11 08:21:43 IQ138000 ModemManager[469]: <info>  [modem2] mobile equipment request to deactivate context (cid 3)
Oct 11 08:21:43 IQ138000 ModemManager[469]: <info>  [modem2/bearer2] explicitly disconnected
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:21:43 IQ138000 pppd[8539]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 11 08:21:43 IQ138000 pppd[8539]: nm-ppp-plugin: cleaning up
Oct 11 08:21:43 IQ138000 pppd[8539]: Exit.
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:44 IQ138000 ModemManager[469]: <info>  [modem2] state changed (disconnecting -> registered)
Oct 11 08:21:44 IQ138000 ModemManager[469]: <info>  [modem2/bearer2] connection #1 finished: duration 7196s
Oct 11 08:21:44 IQ138000 NetworkManager[403]: <info>  [1760170904.3165] device (ttyUSB1): state change: deactivating -> disconnected (reason 'user-requested', sys-iface-state: 'managed')
Oct 11 08:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:44 IQ138000 ntpd[1651]: Deleting interface #6 *multiple*, 10.37.94.94#123, interface stats: received=751, sent=752, dropped=0, active_time=7193 secs
Oct 11 08:21:44 IQ138000 ntpd[1651]: 92.255.126.4 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 94.100.180.133 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 92.255.126.17 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 46.146.231.187 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 185.211.244.47 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 51.250.110.169 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 188.225.33.239 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 193.106.93.116 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 ntpd[1651]: 109.195.84.246 local addr 10.37.94.94 -> <null>
Oct 11 08:21:44 IQ138000 NetworkManager[403]: <info>  [1760170904.3887] manager: NetworkManager state is now DISCONNECTED
Oct 11 08:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/7
Oct 11 08:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:45 IQ138000 ModemManager[469]: <info>  [modem2] mobile equipment forced PS detach: all contexts have been deactivated
Oct 11 08:21:45 IQ138000 ModemManager[469]: <info>  [modem2] 3GPP registration state changed (home -> idle)
Oct 11 08:21:45 IQ138000 ModemManager[469]: <info>  [modem2] state changed (registered -> enabled)
Oct 11 08:21:45 IQ138000 ModemManager[469]: <info>  [modem2] network request to deactivate context (cid 1)
Oct 11 08:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:21:45 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 08:21:51 IQ138000 ModemManager[469]: <info>  [modem2] state changed (enabled -> disabling)
Oct 11 08:21:51 IQ138000 ModemManager[469]: <info>  [modem2] 3GPP registration state changed (idle -> unknown)
Oct 11 08:21:51 IQ138000 NetworkManager[403]: <info>  [1760170911.8323] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 11 08:21:54 IQ138000 ModemManager[469]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 08:21:54 IQ138000 ModemManager[469]: <warn>  [modem3] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 08:21:54 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 08:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:21:56 IQ138000 ModemManager[469]: <warn>  [modem3/sim3] couldn't load operator identifier: Missing +CRSM prefix
Oct 11 08:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:21:57 IQ138000 ModemManager[469]: <warn>  [modem3/sim3] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 08:21:57 IQ138000 ModemManager[469]: <warn>  [modem3/sim3] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 08:21:57 IQ138000 ModemManager[469]: <warn>  [modem3] couldn't load list of own numbers: Operation not supported
Oct 11 08:21:58 IQ138000 ModemManager[469]: <info>  [modem3] state changed (unknown -> disabled)
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1419] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/17)
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1458] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1497] device (ttyUSB1): modem state 'enabling'
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1520] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1547] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1591] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1599] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:21:58 IQ138000 NetworkManager[403]: <info>  [1760170918.1620] manager: NetworkManager state is now CONNECTING
Oct 11 08:21:58 IQ138000 ModemManager[469]: <info>  [modem3] state changed (disabled -> enabling)
Oct 11 08:21:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/92
Oct 11 08:21:58 IQ138000 ModemManager[469]: <info>  [modem3] power state updated: on
Oct 11 08:21:59 IQ138000 wb-connection-manager[8646]: Changed SIM slot to 2 to check connectivity
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.1835] device (ttyUSB1): state change: prepare -> deactivating (reason 'new-activation', sys-iface-state: 'managed')
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.1851] manager: NetworkManager state is now DISCONNECTING
Oct 11 08:21:59 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=403 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.1895] device (ttyUSB1): disconnecting for new activation request.
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.1902] audit: op="connection-activate" uuid="8b9964d4-b8dd-34d3-a3ed-481840bcf8c9" name="wb-gsm-sim2" pid=8646 uid=0 result="success"
Oct 11 08:21:59 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 08:21:59 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 08:21:59 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.3014] device (ttyUSB1): state change: deactivating -> disconnected (reason 'new-activation', sys-iface-state: 'managed')
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.3044] manager: NetworkManager state is now DISCONNECTED
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.3058] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.3084] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:21:59 IQ138000 NetworkManager[403]: <info>  [1760170919.3103] manager: NetworkManager state is now CONNECTING
Oct 11 08:21:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/93
Oct 11 08:21:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/92
Oct 11 08:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:02 IQ138000 ModemManager[469]: <info>  [modem3] state changed (enabling -> enabled)
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] 3GPP registration state changed (unknown -> registering)
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] 3GPP registration state changed (registering -> home)
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] state changed (enabled -> registered)
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] simple connect started...
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] simple connect state (6/10): register
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] simple connect state (7/10): wait to get packet service state attached
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] simple connect state (8/10): bearer
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] simple connect state (9/10): connect
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] state changed (registered -> connecting)
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] state changed (connecting -> connected)
Oct 11 08:22:03 IQ138000 ModemManager[469]: <info>  [modem3] simple connect state (10/10): all done
Oct 11 08:22:03 IQ138000 NetworkManager[403]: <info>  [1760170923.8073] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:03 IQ138000 NetworkManager[403]: <info>  [1760170923.8088] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 08:22:03 IQ138000 NetworkManager[403]: <info>  [1760170923.8097] ppp-manager: starting PPP connection
Oct 11 08:22:03 IQ138000 NetworkManager[403]: <info>  [1760170923.8217] ppp-manager: pppd started with pid 23531
Oct 11 08:22:03 IQ138000 pppd[23531]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 08:22:03 IQ138000 NetworkManager[23531]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: initializing
Oct 11 08:22:03 IQ138000 pppd[23531]: pppd 2.4.9 started by root, uid 0
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 08:22:03 IQ138000 pppd[23531]: Using interface ppp0
Oct 11 08:22:03 IQ138000 NetworkManager[23531]: Using interface ppp0
Oct 11 08:22:03 IQ138000 NetworkManager[23531]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 08:22:03 IQ138000 pppd[23531]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 08:22:03 IQ138000 NetworkManager[403]: <info>  [1760170923.8848] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/18)
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 08:22:03 IQ138000 pppd[23531]: PAP authentication succeeded
Oct 11 08:22:03 IQ138000 pppd[23531]: kernel does not support PPP filtering
Oct 11 08:22:03 IQ138000 pppd[23531]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 08:22:03 IQ138000 NetworkManager[23531]: PAP authentication succeeded
Oct 11 08:22:03 IQ138000 NetworkManager[23531]: kernel does not support PPP filtering
Oct 11 08:22:04 IQ138000 ModemManager[469]: <info>  [modem3] mobile equipment request to activate context (cid 2)
Oct 11 08:22:04 IQ138000 pppd[23531]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 08:22:04 IQ138000 NetworkManager[23531]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 08:22:04 IQ138000 pppd[23531]: local  IP address 10.148.99.160
Oct 11 08:22:04 IQ138000 NetworkManager[23531]: local  IP address 10.148.99.160
Oct 11 08:22:04 IQ138000 NetworkManager[23531]: remote IP address 10.64.64.64
Oct 11 08:22:04 IQ138000 NetworkManager[23531]: primary   DNS address 176.59.62.125
Oct 11 08:22:04 IQ138000 NetworkManager[23531]: secondary DNS address 176.59.62.126
Oct 11 08:22:04 IQ138000 pppd[23531]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 08:22:04 IQ138000 pppd[23531]: remote IP address 10.64.64.64
Oct 11 08:22:04 IQ138000 pppd[23531]: primary   DNS address 176.59.62.125
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.2863] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 08:22:04 IQ138000 pppd[23531]: secondary DNS address 176.59.62.126
Oct 11 08:22:04 IQ138000 pppd[23531]: nm-ppp-plugin: ip-up event
Oct 11 08:22:04 IQ138000 pppd[23531]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.2964] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.2990] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3040] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3066] policy: set 'wb-gsm-sim2' (ppp0) as default for IPv4 routing and DNS
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3616] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3823] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3836] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3857] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3877] device (ttyUSB1): Activation: successful, device activated.
Oct 11 08:22:04 IQ138000 NetworkManager[403]: <info>  [1760170924.3911] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 08:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:05 IQ138000 ntpd[1651]: Listen normally on 7 ppp0 10.148.99.160:123
Oct 11 08:22:05 IQ138000 ntpd[1651]: new interface(s) found: waking up resolver
Oct 11 08:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:05 IQ138000 vnstatd[1654]: Info: Interface "ppp0" enabled.
Oct 11 08:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:06 IQ138000 wb-connection-manager[8646]: Armed sticky timeout until 2025-10-11T08:37:06.616430 for device ttyUSB1
Oct 11 08:22:06 IQ138000 wb-connection-manager[8646]: Current connection changed to wb-gsm-sim2
Oct 11 08:22:11 IQ138000 wb-watchdog[23641]: [INFO] Interval #126 started. Waiting up to 60 seconds for error...
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.1769] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.5811] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.5815] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.5821] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.5886] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.5907] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.5909] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6005] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6027] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6045] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6048] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6050] Config: added 'scan_ssid' value '1'
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6051] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6053] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6054] Config: added 'psk' value '<hidden>'
Oct 11 08:22:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:22:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/94
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6913] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:22:12 IQ138000 NetworkManager[403]: <info>  [1760170932.6915] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:22:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:22:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:22:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:22:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:22:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:22:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:22:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:22:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:22:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:22:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:22:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:22:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:22:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:22:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:22:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:22:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:22:12 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:22:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:22:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:22:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:22:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:22:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:22:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:22:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:22:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:22:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:22:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:22:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:22:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:22:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:22:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:22:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:22:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:22:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:22:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:22:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:22:15 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 08:22:15 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.377s CPU time.
Oct 11 08:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:22:21 IQ138000 ntpd[1651]: Soliciting pool server 45.90.217.6
Oct 11 08:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:22:38 IQ138000 NetworkManager[403]: <warn>  [1760170958.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:22:38 IQ138000 NetworkManager[403]: <info>  [1760170958.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:22:38 IQ138000 NetworkManager[403]: <warn>  [1760170958.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:22:38 IQ138000 NetworkManager[403]: <info>  [1760170958.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:22:38 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:22:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/94
Oct 11 08:22:38 IQ138000 NetworkManager[403]: <info>  [1760170958.0699] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:22:38 IQ138000 NetworkManager[403]: <info>  [1760170958.0701] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:22:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:22:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:22:38 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:22:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:22:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:22:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:22:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:22:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:22:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:22:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:22:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:22:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:22:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:22:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:22:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:22:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:22:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:22:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:22:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:22:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:22:42 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:22:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:22:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:22:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:22:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:22:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:22:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:22:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:22:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:22:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:22:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:22:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:22:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:22:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:22:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:22:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:22:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:22:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:22:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:22:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:22:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:22:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:23:11 IQ138000 wb-watchdog[24257]: [INFO] Interval #127 started. Waiting up to 60 seconds for error...
Oct 11 08:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:23:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:23:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:23:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:23:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:23:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:23:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:23:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:23:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:23:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:23:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:23:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:23:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:23:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:23:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:23:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:23:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:23:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:23:13 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:23:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:23:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:23:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:23:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:23:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:23:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:23:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:23:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:23:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:23:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:23:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:23:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:23:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:23:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:23:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:23:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:23:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:23:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:23:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:23:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:23:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:17 IQ138000 NetworkManager[403]: <info>  [1760170997.2079] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L2, row count 7183, limit 7042
Oct 11 08:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4347] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4404] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4433] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4587] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4605] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4607] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4803] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4828] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4845] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4853] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4866] Config: added 'scan_ssid' value '1'
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4868] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4869] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:23:39 IQ138000 NetworkManager[403]: <info>  [1760171019.4870] Config: added 'psk' value '<hidden>'
Oct 11 08:23:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/95
Oct 11 08:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:42 IQ138000 NetworkManager[403]: <info>  [1760171022.5621] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:23:42 IQ138000 NetworkManager[403]: <info>  [1760171022.5627] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:23:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:23:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:23:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:23:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:23:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:23:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:23:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:23:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:23:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:23:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:23:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:23:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:23:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:23:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:23:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:23:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:23:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:23:43 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:23:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:23:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:23:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:23:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:23:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:23:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:23:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:23:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:23:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:23:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:23:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:23:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:23:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:23:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:23:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:23:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:23:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:23:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:23:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:23:52 IQ138000 python3[2000]: OLD SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 08:23:52 IQ138000 python3[2000]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:24:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:05 IQ138000 NetworkManager[403]: <warn>  [1760171045.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:24:05 IQ138000 NetworkManager[403]: <info>  [1760171045.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:24:05 IQ138000 NetworkManager[403]: <warn>  [1760171045.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:24:05 IQ138000 NetworkManager[403]: <info>  [1760171045.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:24:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/95
Oct 11 08:24:05 IQ138000 NetworkManager[403]: <info>  [1760171045.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:24:05 IQ138000 NetworkManager[403]: <info>  [1760171045.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:11 IQ138000 wb-watchdog[24968]: [INFO] Interval #128 started. Waiting up to 60 seconds for error...
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:24:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:24:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:24:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:24:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:24:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:24:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:24:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:24:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:24:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:24:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:24:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:24:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:24:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:24:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:24:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:24:13 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:24:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:24:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:24:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:24:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:24:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:24:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:24:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:24:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:24:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:24:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:24:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:24:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:24:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:24:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:24:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:24:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:24:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:24:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:22 IQ138000 NetworkManager[403]: <info>  [1760171062.1566] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:24:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:24:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:24:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:24:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:24:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:24:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:24:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:24:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:24:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:24:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:24:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:24:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:24:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:24:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:24:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:24:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:24:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:24:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:24:43 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:24:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:24:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:24:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:24:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:24:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:24:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:24:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:24:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:24:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:24:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:24:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:24:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:24:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:24:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:24:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:24:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:24:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:24:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:24:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:24:51 IQ138000 npm[3801]: [2025-10-11 08:24:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.57,"last_seen":1760171091151,"linkquality":98,"power_outage_count":48745,"temperature":24.53,"voltage":3025}'
Oct 11 08:24:51 IQ138000 npm[3801]: [2025-10-11 08:24:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.51,"last_seen":1760171091164,"linkquality":94,"power_outage_count":48745,"temperature":24.53,"voltage":3025}'
Oct 11 08:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:24:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:24:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:01 IQ138000 CRON[25484]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:25:01 IQ138000 CRON[25488]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 08:25:01 IQ138000 CRON[25484]: pam_unix(cron:session): session closed for user root
Oct 11 08:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1674] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1682] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1690] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1745] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1763] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1765] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1853] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1871] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1887] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1889] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1890] Config: added 'scan_ssid' value '1'
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1891] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1892] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.1893] Config: added 'psk' value '<hidden>'
Oct 11 08:25:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/96
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.2591] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:25:06 IQ138000 NetworkManager[403]: <info>  [1760171106.2593] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:11 IQ138000 wb-watchdog[25580]: [INFO] Interval #129 started. Waiting up to 60 seconds for error...
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:25:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:25:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:25:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:25:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:25:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:25:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:25:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:25:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:25:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:25:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:25:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:25:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:25:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:25:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:25:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:25:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:25:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:25:13 IQ138000 python3[2000]:            |       signal quality: 80% (recent)
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:25:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:25:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:25:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:25:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:25:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:25:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:25:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:25:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:25:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:25:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:25:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:25:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:25:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:25:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:25:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:25:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:25:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:25:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:25:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:25:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:25:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:25:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:31 IQ138000 NetworkManager[403]: <warn>  [1760171131.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:25:31 IQ138000 NetworkManager[403]: <info>  [1760171131.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:25:31 IQ138000 NetworkManager[403]: <warn>  [1760171131.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:25:31 IQ138000 NetworkManager[403]: <info>  [1760171131.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:25:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/96
Oct 11 08:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:31 IQ138000 NetworkManager[403]: <info>  [1760171131.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:25:31 IQ138000 NetworkManager[403]: <info>  [1760171131.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:25:36 IQ138000 NetworkManager[403]: <info>  [1760171136.9512] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:25:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:25:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:25:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:25:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:25:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:25:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:25:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:25:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:25:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:25:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:25:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:25:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:25:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:25:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:25:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:25:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:25:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:25:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:25:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:25:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:25:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:25:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:25:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:25:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:25:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:25:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:25:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:25:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:25:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:25:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:25:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:25:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:25:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:25:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:25:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:25:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:25:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:25:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:26:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:26:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:26:11 IQ138000 wb-watchdog[26282]: [INFO] Interval #130 started. Waiting up to 60 seconds for error...
Oct 11 08:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:26:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:26:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:26:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:26:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:26:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:26:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:26:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:26:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:26:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:26:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:26:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:26:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:26:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:26:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:26:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:26:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:26:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:26:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:26:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:26:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:26:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:26:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:26:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:26:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:26:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:26:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:26:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:26:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:26:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:26:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:26:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:26:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:26:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:26:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:26:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:26:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:26:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:26:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:31 IQ138000 NetworkManager[403]: <info>  [1760171191.9918] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:26:31 IQ138000 NetworkManager[403]: <info>  [1760171191.9923] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:26:31 IQ138000 NetworkManager[403]: <info>  [1760171191.9951] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0011] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0065] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0067] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0152] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0186] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0207] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0210] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0211] Config: added 'scan_ssid' value '1'
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0212] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0213] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0214] Config: added 'psk' value '<hidden>'
Oct 11 08:26:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/97
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0897] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:26:32 IQ138000 NetworkManager[403]: <info>  [1760171192.0900] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:26:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:26:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:26:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:26:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:26:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:26:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:26:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:26:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:26:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:26:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:26:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:26:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:26:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:26:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:26:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:26:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:26:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:26:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:26:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:26:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:26:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:26:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:26:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:26:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:26:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:26:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:26:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:26:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:26:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:26:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:26:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:26:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:26:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:26:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:26:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:26:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:26:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:26:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:26:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:26:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:26:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:26:57 IQ138000 NetworkManager[403]: <warn>  [1760171217.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:26:57 IQ138000 NetworkManager[403]: <info>  [1760171217.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:26:57 IQ138000 NetworkManager[403]: <warn>  [1760171217.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:26:57 IQ138000 NetworkManager[403]: <info>  [1760171217.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:26:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/97
Oct 11 08:26:57 IQ138000 NetworkManager[403]: <info>  [1760171217.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:26:57 IQ138000 NetworkManager[403]: <info>  [1760171217.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:26:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L1, row count 7183, limit 7042
Oct 11 08:26:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L2, row count 7183, limit 7042
Oct 11 08:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:02 IQ138000 NetworkManager[403]: <info>  [1760171222.7054] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:04 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L3, row count 7183, limit 7042
Oct 11 08:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:11 IQ138000 wb-watchdog[26892]: [INFO] Interval #131 started. Waiting up to 60 seconds for error...
Oct 11 08:27:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:27:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:27:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:27:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:27:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:27:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:27:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:27:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:27:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:27:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:27:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:27:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:27:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:27:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:27:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:27:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:27:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:27:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:27:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:27:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:27:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:27:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:27:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:27:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:27:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:27:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:27:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:27:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:27:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:27:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:27:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:27:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:27:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:27:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:27:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:27:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:27:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:26 IQ138000 npm[3801]: [2025-10-11 08:27:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.51,"last_seen":1760171246960,"linkquality":94,"power_outage_count":48745,"temperature":24.36,"voltage":3025}'
Oct 11 08:27:26 IQ138000 npm[3801]: [2025-10-11 08:27:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.82,"last_seen":1760171246972,"linkquality":94,"power_outage_count":48745,"temperature":24.36,"voltage":3025}'
Oct 11 08:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:27:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:27:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:27:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:27:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:27:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:27:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:27:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:27:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:27:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:27:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:27:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:27:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:27:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:27:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:27:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:27:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:27:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:27:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:27:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:27:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:27:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:27:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:27:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:27:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:27:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:27:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:27:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:27:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:27:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:27:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:27:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:27:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:27:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:27:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:27:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:27:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:27:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:27:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:27:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:27:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:27:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:27:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:27:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8491] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8496] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8510] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8564] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8583] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8585] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8666] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8707] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8737] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8741] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8742] Config: added 'scan_ssid' value '1'
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8743] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8744] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.8745] Config: added 'psk' value '<hidden>'
Oct 11 08:27:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/98
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.9565] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:27:57 IQ138000 NetworkManager[403]: <info>  [1760171277.9567] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:28:11 IQ138000 wb-watchdog[27603]: [INFO] Interval #132 started. Waiting up to 60 seconds for error...
Oct 11 08:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:28:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:28:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:28:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:28:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:28:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:28:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:28:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:28:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:28:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:28:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:28:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:28:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:28:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:28:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:28:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:28:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:28:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:28:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:28:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:28:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:28:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:28:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:28:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:28:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:28:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:28:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:28:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:28:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:28:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:28:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:28:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:28:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:28:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:28:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:28:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:28:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:28:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:28:23 IQ138000 NetworkManager[403]: <warn>  [1760171303.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:28:23 IQ138000 NetworkManager[403]: <info>  [1760171303.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:28:23 IQ138000 NetworkManager[403]: <warn>  [1760171303.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:28:23 IQ138000 NetworkManager[403]: <info>  [1760171303.0271] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:28:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/98
Oct 11 08:28:23 IQ138000 NetworkManager[403]: <info>  [1760171303.0769] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:28:23 IQ138000 NetworkManager[403]: <info>  [1760171303.0771] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:28 IQ138000 NetworkManager[403]: <info>  [1760171308.6870] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:28:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:28:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:28:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:28:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:28:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:28:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:28:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:28:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:28:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:28:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:28:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:28:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:28:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:28:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:28:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:28:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:28:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:28:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:28:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:28:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:28:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:28:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:28:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:28:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:28:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:28:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:28:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:28:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:28:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:28:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:28:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:28:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:28:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:28:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:28:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:28:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:11 IQ138000 wb-watchdog[28210]: [INFO] Interval #133 started. Waiting up to 60 seconds for error...
Oct 11 08:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:29:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:29:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:29:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:29:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:29:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:29:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:29:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:29:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:29:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:29:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:29:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:29:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:29:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:29:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:29:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:29:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:29:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:29:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:29:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:29:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:29:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:29:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:29:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:29:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:29:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:29:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:29:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:29:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:29:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:29:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:29:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:29:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:29:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:29:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:29:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:29:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:29:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:29:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.7843] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.7873] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.7886] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8000] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8023] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8025] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8126] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8160] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8179] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8184] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8185] Config: added 'scan_ssid' value '1'
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8186] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8188] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8189] Config: added 'psk' value '<hidden>'
Oct 11 08:29:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/99
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8841] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:29:23 IQ138000 NetworkManager[403]: <info>  [1760171363.8843] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:29:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:29:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:29:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:29:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:29:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:29:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:29:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:29:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:29:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:29:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:29:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:29:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:29:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:29:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:29:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:29:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:29:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:29:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:29:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:29:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:29:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:29:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:29:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:29:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:29:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:29:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:29:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:29:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:29:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:29:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:29:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:29:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:29:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:29:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:29:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:29:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:49 IQ138000 NetworkManager[403]: <warn>  [1760171389.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:29:49 IQ138000 NetworkManager[403]: <info>  [1760171389.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:29:49 IQ138000 NetworkManager[403]: <warn>  [1760171389.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:29:49 IQ138000 NetworkManager[403]: <info>  [1760171389.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:29:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/99
Oct 11 08:29:49 IQ138000 NetworkManager[403]: <info>  [1760171389.0781] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:29:49 IQ138000 NetworkManager[403]: <info>  [1760171389.0783] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:29:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:29:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:55 IQ138000 NetworkManager[403]: <info>  [1760171395.5407] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:11 IQ138000 wb-watchdog[28916]: [INFO] Interval #134 started. Waiting up to 60 seconds for error...
Oct 11 08:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:30:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:30:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:30:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:30:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:30:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:30:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:30:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:30:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:30:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:30:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:30:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:30:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:30:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:30:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:30:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:30:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:30:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:30:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:30:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:30:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:30:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:30:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:30:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:30:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:30:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:30:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:30:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:30:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:30:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:30:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:30:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:30:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:30:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:30:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:30:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:30:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:30:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:30:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:30:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:30:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:30:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:30:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:30:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:30:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:30:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:30:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:30:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:30:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:30:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:30:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:30:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:30:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:30:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:30:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:30:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:30:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:30:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:30:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:30:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:30:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:30:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:30:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:30:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:30:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:30:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:30:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:30:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:30:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:30:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:30:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:30:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:30:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:30:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:30:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:30:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.8935] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.8940] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.8946] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9043] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9064] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9066] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9242] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9294] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9341] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9345] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9346] Config: added 'scan_ssid' value '1'
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9347] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9348] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:30:50 IQ138000 NetworkManager[403]: <info>  [1760171450.9349] Config: added 'psk' value '<hidden>'
Oct 11 08:30:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/100
Oct 11 08:30:51 IQ138000 NetworkManager[403]: <info>  [1760171451.0123] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:30:51 IQ138000 NetworkManager[403]: <info>  [1760171451.0125] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:31:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:31:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:11 IQ138000 wb-watchdog[29529]: [INFO] Interval #135 started. Waiting up to 60 seconds for error...
Oct 11 08:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:31:16 IQ138000 NetworkManager[403]: <warn>  [1760171476.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:31:16 IQ138000 NetworkManager[403]: <info>  [1760171476.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:31:16 IQ138000 NetworkManager[403]: <warn>  [1760171476.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:31:16 IQ138000 NetworkManager[403]: <info>  [1760171476.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:31:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/100
Oct 11 08:31:16 IQ138000 NetworkManager[403]: <info>  [1760171476.0735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:31:16 IQ138000 NetworkManager[403]: <info>  [1760171476.0738] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:31:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:31:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:31:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:31:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:31:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:31:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:31:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:31:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:31:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:31:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:31:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:31:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:31:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:31:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:31:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:31:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:31:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:31:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:31:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:31:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:31:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:31:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:31:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:31:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:31:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:31:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:31:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:31:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:31:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:31:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:31:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:31:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:31:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:31:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:31:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:31:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:31:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:31:21 IQ138000 NetworkManager[403]: <info>  [1760171481.6421] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:31:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:31:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L1, row count 7183, limit 7042
Oct 11 08:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:31:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:31:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:31:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:31:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:31:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:31:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:31:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:31:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:31:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:31:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:31:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:31:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:31:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:31:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:31:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:31:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:31:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:31:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:31:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:31:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:31:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:31:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:31:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:31:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:31:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:31:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:31:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:31:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:31:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:31:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:31:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:31:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:31:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:31:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:31:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:31:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:31:48 IQ138000 npm[3801]: [2025-10-11 08:31:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.82,"last_seen":1760171508169,"linkquality":109,"power_outage_count":48745,"temperature":24.44,"voltage":3025}'
Oct 11 08:31:48 IQ138000 npm[3801]: [2025-10-11 08:31:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.76,"last_seen":1760171508180,"linkquality":105,"power_outage_count":48745,"temperature":24.44,"voltage":3025}'
Oct 11 08:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:11 IQ138000 wb-watchdog[30222]: [INFO] Interval #136 started. Waiting up to 60 seconds for error...
Oct 11 08:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6087] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6092] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6097] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6186] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6218] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6233] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6387] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6413] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6430] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6435] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6437] Config: added 'scan_ssid' value '1'
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6439] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6454] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.6456] Config: added 'psk' value '<hidden>'
Oct 11 08:32:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/101
Oct 11 08:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.7151] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:32:16 IQ138000 NetworkManager[403]: <info>  [1760171536.7152] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:32:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:32:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:32:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:32:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:32:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:32:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:32:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:32:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:32:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:32:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:32:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:32:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:32:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:32:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:32:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:32:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:32:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:32:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:32:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:32:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:32:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:32:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:32:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:32:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:32:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:32:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:32:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:32:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:32:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:32:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:32:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:32:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:32:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:32:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:32:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:32:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:32:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:32:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:32:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:32:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:32:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:32:42 IQ138000 NetworkManager[403]: <warn>  [1760171562.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:32:42 IQ138000 NetworkManager[403]: <info>  [1760171562.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:32:42 IQ138000 NetworkManager[403]: <warn>  [1760171562.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:32:42 IQ138000 NetworkManager[403]: <info>  [1760171562.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:32:42 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:32:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/101
Oct 11 08:32:42 IQ138000 NetworkManager[403]: <info>  [1760171562.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:32:42 IQ138000 NetworkManager[403]: <info>  [1760171562.0699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:32:42 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:32:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:32:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:32:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:32:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:32:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:32:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:32:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:32:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:32:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:32:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:32:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:32:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:32:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:32:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:32:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:32:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:32:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:32:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:32:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:32:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:32:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:32:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:32:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:32:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:32:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:32:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:32:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:32:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:32:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:32:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:32:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:32:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:32:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:32:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:32:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:32:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:32:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:32:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:48 IQ138000 NetworkManager[403]: <info>  [1760171568.3386] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 4347 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:32:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:32:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:33:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:11 IQ138000 wb-watchdog[30848]: [INFO] Interval #137 started. Waiting up to 60 seconds for error...
Oct 11 08:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:33:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:33:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:33:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:33:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:33:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:33:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:33:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:33:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:33:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:33:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:33:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:33:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:33:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:33:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:33:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:33:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:33:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:33:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:33:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:33:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:33:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:33:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:33:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:33:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:33:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:33:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:33:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:33:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:33:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:33:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:33:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:33:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:33:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:33:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:33:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8708 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:33:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5480] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5502] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5509] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5559] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5576] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5578] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5688] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5731] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5763] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5766] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5767] Config: added 'scan_ssid' value '1'
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5770] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5772] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:33:43 IQ138000 NetworkManager[403]: <info>  [1760171623.5773] Config: added 'psk' value '<hidden>'
Oct 11 08:33:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/102
Oct 11 08:33:45 IQ138000 NetworkManager[403]: <info>  [1760171625.6581] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:33:45 IQ138000 NetworkManager[403]: <info>  [1760171625.6589] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:33:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:33:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:33:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:33:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:33:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:33:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:33:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:33:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:33:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:33:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:33:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:33:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:33:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:33:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:33:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:33:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:33:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:33:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:33:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:33:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:33:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:33:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:33:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:33:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:33:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:33:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:33:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:33:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:33:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:33:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:33:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:33:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:33:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:33:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:33:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:33:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:33:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:33:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:34:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:34:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:34:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:09 IQ138000 NetworkManager[403]: <warn>  [1760171649.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:34:09 IQ138000 NetworkManager[403]: <info>  [1760171649.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:34:09 IQ138000 NetworkManager[403]: <warn>  [1760171649.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:34:09 IQ138000 NetworkManager[403]: <info>  [1760171649.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:34:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/102
Oct 11 08:34:09 IQ138000 NetworkManager[403]: <info>  [1760171649.0674] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:34:09 IQ138000 NetworkManager[403]: <info>  [1760171649.0676] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:34:11 IQ138000 wb-watchdog[31547]: [INFO] Interval #138 started. Waiting up to 60 seconds for error...
Oct 11 08:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:34:15 IQ138000 NetworkManager[403]: <info>  [1760171655.2925] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:34:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:34:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:34:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:34:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:34:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:34:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:34:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:34:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:34:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:34:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:34:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:34:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:34:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:34:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:34:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:34:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:34:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:34:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:34:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:34:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:34:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:34:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:34:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:34:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:34:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:34:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:34:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:34:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:34:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:34:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:34:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:34:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:34:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:34:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:34:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:34:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:34:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:34:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:34:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:39 IQ138000 npm[3801]: [2025-10-11 08:34:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.76,"last_seen":1760171679042,"linkquality":105,"power_outage_count":48745,"temperature":24.42,"voltage":3025}'
Oct 11 08:34:39 IQ138000 npm[3801]: [2025-10-11 08:34:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.79,"last_seen":1760171679063,"linkquality":105,"power_outage_count":48745,"temperature":24.42,"voltage":3025}'
Oct 11 08:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:34:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:34:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:34:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:34:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:34:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:34:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:34:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:34:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:34:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:34:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:34:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:34:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:34:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:34:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:34:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:34:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:34:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:34:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:34:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:34:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:34:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:34:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:34:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:34:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:34:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:34:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:34:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:34:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:34:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:34:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:34:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:34:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:34:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:34:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:34:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:34:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:34:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:34:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:01 IQ138000 CRON[32064]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:35:01 IQ138000 CRON[32068]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 08:35:01 IQ138000 CRON[32064]: pam_unix(cron:session): session closed for user root
Oct 11 08:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:35:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:35:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3341] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3346] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3357] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3418] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3443] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3445] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3554] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3581] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3602] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3608] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3626] Config: added 'scan_ssid' value '1'
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3627] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3631] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.3632] Config: added 'psk' value '<hidden>'
Oct 11 08:35:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/103
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.4345] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:35:10 IQ138000 NetworkManager[403]: <info>  [1760171710.4348] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:11 IQ138000 wb-watchdog[32155]: [INFO] Interval #139 started. Waiting up to 60 seconds for error...
Oct 11 08:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:35:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:35:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:35:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:35:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:35:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:35:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:35:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:35:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:35:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:35:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:35:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:35:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:35:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:35:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:35:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:35:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:35:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:35:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:35:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:35:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:35:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:35:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:35:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:35:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:35:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:35:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:35:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:35:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:35:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:35:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:35:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:35:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:35:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:35:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:35:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:35:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:35:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:36 IQ138000 NetworkManager[403]: <warn>  [1760171736.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:35:36 IQ138000 NetworkManager[403]: <info>  [1760171736.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:35:36 IQ138000 NetworkManager[403]: <warn>  [1760171736.0272] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:35:36 IQ138000 NetworkManager[403]: <info>  [1760171736.0313] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:35:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:35:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/103
Oct 11 08:35:36 IQ138000 NetworkManager[403]: <info>  [1760171736.0688] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:35:36 IQ138000 NetworkManager[403]: <info>  [1760171736.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:35:42 IQ138000 NetworkManager[403]: <info>  [1760171742.0706] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:35:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:35:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:35:43 IQ138000 npm[3801]: [2025-10-11 08:35:43] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.07,"last_seen":1760171743699,"linkquality":69,"power_outage_count":25795,"pressure":993.6,"temperature":20.77,"voltage":2995}'
Oct 11 08:35:43 IQ138000 npm[3801]: [2025-10-11 08:35:43] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.17,"last_seen":1760171743714,"linkquality":69,"power_outage_count":25795,"pressure":993.6,"temperature":20.77,"voltage":2995}'
Oct 11 08:35:43 IQ138000 npm[3801]: [2025-10-11 08:35:43] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.17,"last_seen":1760171743714,"linkquality":69,"power_outage_count":25795,"pressure":993.3,"temperature":20.77,"voltage":2995}'
Oct 11 08:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:35:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:35:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:35:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:35:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:35:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:35:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:35:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:35:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:35:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:35:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:35:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:35:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:35:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:35:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:35:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:35:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:35:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:35:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:35:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:35:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:35:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:35:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:35:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:35:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:35:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:35:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:35:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:35:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:35:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:35:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:35:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:35:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:35:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:35:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:35:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:36:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:36:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:36:11 IQ138000 wb-watchdog[425]: [INFO] Interval #140 started. Waiting up to 60 seconds for error...
Oct 11 08:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:36:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:36:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:36:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:36:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:36:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:36:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:36:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:36:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:36:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:36:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:36:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:36:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:36:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:36:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:36:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:36:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:36:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:36:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:36:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:36:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:36:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:36:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:36:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:36:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:36:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:36:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:36:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:36:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:36:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:36:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:36:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:36:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:36:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:36:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:36:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:36:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1355] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1367] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1382] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1523] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1546] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1547] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1690] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1710] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1728] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1731] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1732] Config: added 'scan_ssid' value '1'
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1733] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1734] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:36:37 IQ138000 NetworkManager[403]: <info>  [1760171797.1735] Config: added 'psk' value '<hidden>'
Oct 11 08:36:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/104
Oct 11 08:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:36:41 IQ138000 NetworkManager[403]: <info>  [1760171801.2491] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:36:41 IQ138000 NetworkManager[403]: <info>  [1760171801.2494] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:36:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:36:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:36:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:36:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:36:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:36:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:36:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:36:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:36:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:36:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:36:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:36:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:36:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:36:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:36:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:36:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:36:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:36:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:36:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:36:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:36:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:36:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:36:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:36:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:36:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:36:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:36:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:36:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:36:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:36:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:36:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:36:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:36:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:36:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:36:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:36:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:36:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:36:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:36:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:37:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:37:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:02 IQ138000 NetworkManager[403]: <warn>  [1760171822.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:37:02 IQ138000 NetworkManager[403]: <info>  [1760171822.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:37:02 IQ138000 NetworkManager[403]: <warn>  [1760171822.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:37:02 IQ138000 NetworkManager[403]: <info>  [1760171822.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:37:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/104
Oct 11 08:37:02 IQ138000 NetworkManager[403]: <info>  [1760171822.0647] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:37:02 IQ138000 NetworkManager[403]: <info>  [1760171822.0649] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:37:07 IQ138000 NetworkManager[403]: <info>  [1760171827.8503] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:37:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:37:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:11 IQ138000 wb-watchdog[1035]: [INFO] Interval #141 started. Waiting up to 60 seconds for error...
Oct 11 08:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:37:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:37:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:37:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:37:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:37:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:37:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:37:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:37:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:37:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:37:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:37:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:37:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:37:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:37:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:37:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:37:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:37:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:37:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:37:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:37:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:37:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:37:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:37:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:37:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:37:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:37:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:37:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:37:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:37:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:37:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:37:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:37:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:37:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:37:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:37:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:37:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:37:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:37:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:37:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:37:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:37:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:37:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:37:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:37:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:37:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:37:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:37:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:37:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:37:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:37:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:37:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:37:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:37:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:37:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:37:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:37:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:37:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:37:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:37:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:37:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:37:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:37:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:37:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:37:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:37:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:37:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:37:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:37:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:37:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:37:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:37:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:37:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:01 IQ138000 CRON[1663]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:38:01 IQ138000 CRON[1668]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 08:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.7845] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.7850] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.7856] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.7945] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.7967] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.7969] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8073] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8102] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8124] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8129] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8130] Config: added 'scan_ssid' value '1'
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8131] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8135] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8136] Config: added 'psk' value '<hidden>'
Oct 11 08:38:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/105
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8899] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:38:02 IQ138000 NetworkManager[403]: <info>  [1760171882.8901] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:38:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:38:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:38:08 IQ138000 sSMTP[1695]: Unable to locate mail
Oct 11 08:38:08 IQ138000 sSMTP[1695]: Cannot open mail:25
Oct 11 08:38:08 IQ138000 cron[1695]: sendmail: Cannot open mail:25
Oct 11 08:38:08 IQ138000 CRON[1663]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 08:38:08 IQ138000 CRON[1663]: pam_unix(cron:session): session closed for user root
Oct 11 08:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:38:11 IQ138000 wb-watchdog[1755]: [INFO] Interval #142 started. Waiting up to 60 seconds for error...
Oct 11 08:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:38:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:38:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:38:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:38:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:38:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:38:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:38:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:38:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:38:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:38:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:38:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:38:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:38:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:38:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:38:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:38:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:38:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:38:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:38:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:38:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:38:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:38:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:38:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:38:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:38:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:38:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:38:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:38:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:38:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:38:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:38:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:38:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:38:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:38:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:38:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:38:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:38:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:28 IQ138000 NetworkManager[403]: <warn>  [1760171908.0206] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:38:28 IQ138000 NetworkManager[403]: <info>  [1760171908.0208] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:38:28 IQ138000 NetworkManager[403]: <warn>  [1760171908.0235] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:38:28 IQ138000 NetworkManager[403]: <info>  [1760171908.0248] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:38:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/105
Oct 11 08:38:28 IQ138000 NetworkManager[403]: <info>  [1760171908.0673] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:38:28 IQ138000 NetworkManager[403]: <info>  [1760171908.0674] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:34 IQ138000 NetworkManager[403]: <info>  [1760171914.5633] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:38:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:38:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:38:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:38:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:38:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:38:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:38:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:38:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:38:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:38:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:38:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:38:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:38:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:38:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:38:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:38:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:38:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:38:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:38:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:38:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:38:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:38:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:38:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:38:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:38:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:38:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:38:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:38:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:38:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:38:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:38:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:38:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:38:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:38:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:38:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:38:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:38:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:38:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:39:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:39:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:11 IQ138000 wb-watchdog[2416]: [INFO] Interval #143 started. Waiting up to 60 seconds for error...
Oct 11 08:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:39:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:39:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:39:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:39:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:39:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:39:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:39:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:39:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:39:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:39:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:39:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:39:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:39:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:39:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:39:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:39:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:39:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:39:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:39:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:39:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:39:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:39:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:39:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:39:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:39:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:39:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:39:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:39:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:39:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:39:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:39:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:39:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:39:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:39:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:39:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:39:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6516] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6522] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6530] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6620] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6656] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6658] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6826] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6922] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6970] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6987] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6989] Config: added 'scan_ssid' value '1'
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6990] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6991] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.6992] Config: added 'psk' value '<hidden>'
Oct 11 08:39:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/106
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.7819] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:39:29 IQ138000 NetworkManager[403]: <info>  [1760171969.7822] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:39:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:39:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:39:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:39:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:39:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:39:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:39:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:39:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:39:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:39:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:39:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:39:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:39:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:39:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:39:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:39:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:39:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:39:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:39:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:39:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:39:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:39:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:39:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:39:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:39:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:39:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:39:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:39:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:39:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:39:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:39:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:39:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:39:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:39:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:39:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:39:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:39:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:39:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:39:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:55 IQ138000 NetworkManager[403]: <warn>  [1760171995.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:39:55 IQ138000 NetworkManager[403]: <info>  [1760171995.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:39:55 IQ138000 NetworkManager[403]: <warn>  [1760171995.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:39:55 IQ138000 NetworkManager[403]: <info>  [1760171995.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:39:55 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:39:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/106
Oct 11 08:39:55 IQ138000 NetworkManager[403]: <info>  [1760171995.0656] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:39:55 IQ138000 NetworkManager[403]: <info>  [1760171995.0658] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:39:55 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:39:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:39:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:40:01 IQ138000 NetworkManager[403]: <info>  [1760172001.3913] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:11 IQ138000 wb-watchdog[3148]: [INFO] Interval #144 started. Waiting up to 60 seconds for error...
Oct 11 08:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:40:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:40:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:40:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:40:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:40:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:40:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:40:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:40:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:40:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:40:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:40:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:40:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:40:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:40:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:40:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:40:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:40:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:40:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:40:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:40:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:40:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:40:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:40:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:40:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:40:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:40:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:40:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:40:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:40:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:40:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:40:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:40:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:40:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:40:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:40:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:40:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:40:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:40:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:40:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:40:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:40:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:40:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:40:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:40:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:40:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:40:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:40:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:40:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:40:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:40:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:40:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:40:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:40:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:40:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:40:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:40:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:40:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:40:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:40:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:40:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:40:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:40:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:40:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:40:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:40:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:40:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:40:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:40:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:40:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:40:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:40:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:40:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:40:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:40:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:40:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:40:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:40:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4520] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4525] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4531] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4588] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4618] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4620] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4704] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4732] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4749] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4752] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4753] Config: added 'scan_ssid' value '1'
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4754] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4755] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.4756] Config: added 'psk' value '<hidden>'
Oct 11 08:40:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/107
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.5467] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:40:56 IQ138000 NetworkManager[403]: <info>  [1760172056.5477] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:40:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L3, row count 7183, limit 7042
Oct 11 08:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:41:01 IQ138000 NetworkManager[403]: <info>  [1760172061.9208] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:41:01 IQ138000 NetworkManager[403]: <info>  [1760172061.9210] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:41:10 IQ138000 NetworkManager[403]: <info>  [1760172070.3847] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:41:10 IQ138000 NetworkManager[403]: <info>  [1760172070.3849] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:41:12 IQ138000 wb-watchdog[3803]: [INFO] Interval #145 started. Waiting up to 60 seconds for error...
Oct 11 08:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:41:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:41:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:41:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:41:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:41:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:41:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:41:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:41:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:41:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:41:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:41:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:41:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:41:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:41:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:41:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:41:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:41:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:41:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:41:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:41:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:41:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:41:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:41:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:41:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:41:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:41:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:41:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:41:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:41:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:41:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:41:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:41:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:41:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:41:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:41:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:41:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:41:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:41:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:41:22 IQ138000 NetworkManager[403]: <warn>  [1760172082.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:41:22 IQ138000 NetworkManager[403]: <info>  [1760172082.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:41:22 IQ138000 NetworkManager[403]: <warn>  [1760172082.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:41:22 IQ138000 NetworkManager[403]: <info>  [1760172082.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:41:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:41:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/107
Oct 11 08:41:22 IQ138000 NetworkManager[403]: <info>  [1760172082.0645] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:41:22 IQ138000 NetworkManager[403]: <info>  [1760172082.0646] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:27 IQ138000 npm[3801]: [2025-10-11 08:41:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.17,"last_seen":1760172087601,"linkquality":54,"power_outage_count":25795,"pressure":993.3,"temperature":20.81,"voltage":2995}'
Oct 11 08:41:27 IQ138000 npm[3801]: [2025-10-11 08:41:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.91,"last_seen":1760172087617,"linkquality":54,"power_outage_count":25795,"pressure":993.3,"temperature":20.81,"voltage":2995}'
Oct 11 08:41:27 IQ138000 npm[3801]: [2025-10-11 08:41:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.91,"last_seen":1760172087617,"linkquality":54,"power_outage_count":25795,"pressure":993.5,"temperature":20.81,"voltage":2995}'
Oct 11 08:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:28 IQ138000 NetworkManager[403]: <info>  [1760172088.1691] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:41:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:41:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:41:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:41:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:41:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:41:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:41:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:41:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:41:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:41:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:41:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:41:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:41:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:41:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:41:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:41:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:41:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:41:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:41:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:41:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:41:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:41:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:41:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:41:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:41:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:41:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:41:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:41:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:41:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:41:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:41:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:41:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:41:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:41:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:41:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:41:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:41:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:41:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:12 IQ138000 wb-watchdog[4588]: [INFO] Interval #146 started. Waiting up to 60 seconds for error...
Oct 11 08:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:42:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:42:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:42:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:42:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:42:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:42:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:42:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:42:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:42:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:42:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:42:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:42:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:42:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:42:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:42:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:42:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:42:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:42:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:42:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:42:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:42:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:42:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:42:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:42:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:42:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:42:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:42:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:42:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:42:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:42:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:42:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:42:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:42:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:42:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:42:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:42:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2522] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2530] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2541] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2612] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2634] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2636] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2750] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2768] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2784] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2787] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2788] Config: added 'scan_ssid' value '1'
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2789] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2790] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:42:23 IQ138000 NetworkManager[403]: <info>  [1760172143.2791] Config: added 'psk' value '<hidden>'
Oct 11 08:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/108
Oct 11 08:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:26 IQ138000 NetworkManager[403]: <info>  [1760172146.3643] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:42:26 IQ138000 NetworkManager[403]: <info>  [1760172146.3645] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:42:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:42:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:49 IQ138000 NetworkManager[403]: <warn>  [1760172169.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:42:49 IQ138000 NetworkManager[403]: <info>  [1760172169.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:42:49 IQ138000 NetworkManager[403]: <warn>  [1760172169.0270] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:42:49 IQ138000 NetworkManager[403]: <info>  [1760172169.0288] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:42:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/108
Oct 11 08:42:49 IQ138000 NetworkManager[403]: <info>  [1760172169.0750] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:42:49 IQ138000 NetworkManager[403]: <info>  [1760172169.0752] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:42:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:42:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:42:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:42:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:42:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:42:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:42:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:42:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:42:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:42:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:42:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:42:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:42:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:42:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:42:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:42:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:42:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:42:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:42:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:42:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:42:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:42:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:42:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:42:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:42:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:42:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:42:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:42:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:42:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:42:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:42:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:42:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:42:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:42:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:42:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:42:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:42:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:42:54 IQ138000 NetworkManager[403]: <info>  [1760172174.9874] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17432 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:01 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:43:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:43:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:12 IQ138000 wb-watchdog[5219]: [INFO] Interval #147 started. Waiting up to 60 seconds for error...
Oct 11 08:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:43:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:43:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:43:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:43:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:43:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:43:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:43:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:43:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:43:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:43:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:43:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:43:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:43:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:43:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:43:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:43:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:43:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:43:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:43:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:43:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:43:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:43:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:43:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:43:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:43:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:43:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:43:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:43:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:43:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:43:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:43:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:43:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:43:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:43:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:43:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:43:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:26 IQ138000 npm[3801]: [2025-10-11 08:43:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.79,"last_seen":1760172206223,"linkquality":105,"power_outage_count":48745,"temperature":24.94,"voltage":3025}'
Oct 11 08:43:26 IQ138000 npm[3801]: [2025-10-11 08:43:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":48.01,"last_seen":1760172206236,"linkquality":105,"power_outage_count":48745,"temperature":24.94,"voltage":3025}'
Oct 11 08:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:43:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:43:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:43:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:43:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0279] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0286] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0295] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0422] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0441] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0443] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0555] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0577] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0607] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0611] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0613] Config: added 'scan_ssid' value '1'
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0614] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0615] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.0616] Config: added 'psk' value '<hidden>'
Oct 11 08:43:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/109
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.1314] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:43:50 IQ138000 NetworkManager[403]: <info>  [1760172230.1317] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:43:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:43:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:43:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:43:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:43:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:43:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:43:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:43:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:43:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:43:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:43:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:43:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:43:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:43:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:43:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:43:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:43:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:43:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:43:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:43:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:43:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:43:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:43:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:43:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:43:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:43:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:43:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:43:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:43:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:43:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:43:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:43:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:43:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:43:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:43:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:43:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:44:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:44:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:12 IQ138000 wb-watchdog[5902]: [INFO] Interval #148 started. Waiting up to 60 seconds for error...
Oct 11 08:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:15 IQ138000 NetworkManager[403]: <warn>  [1760172255.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:44:15 IQ138000 NetworkManager[403]: <info>  [1760172255.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:44:15 IQ138000 NetworkManager[403]: <warn>  [1760172255.0265] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:44:15 IQ138000 NetworkManager[403]: <info>  [1760172255.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:44:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/109
Oct 11 08:44:15 IQ138000 NetworkManager[403]: <info>  [1760172255.0724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:44:15 IQ138000 NetworkManager[403]: <info>  [1760172255.0726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:20 IQ138000 NetworkManager[403]: <info>  [1760172260.7482] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:44:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:44:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:44:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:44:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:44:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:44:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:44:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:44:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:44:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:44:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:44:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:44:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:44:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:44:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:44:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:44:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:44:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:44:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:44:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:44:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:44:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:44:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:44:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:44:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:44:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:44:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:44:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:44:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:44:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:44:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:44:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:44:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:44:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:44:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:44:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:44:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:44:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:44:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:44:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:44:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:44:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:44:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:44:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:44:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:44:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:44:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:44:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:44:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:44:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:44:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:44:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:44:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:44:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:44:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:44:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:44:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:44:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:44:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:44:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:44:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:44:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:44:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:44:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:44:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:44:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:44:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:44:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:44:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:44:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:44:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:44:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:44:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:44:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:44:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:44:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:01 IQ138000 CRON[6393]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:45:01 IQ138000 CRON[6398]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 08:45:01 IQ138000 CRON[6393]: pam_unix(cron:session): session closed for user root
Oct 11 08:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 08:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:45:12 IQ138000 wb-watchdog[6567]: [INFO] Interval #149 started. Waiting up to 60 seconds for error...
Oct 11 08:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6700] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6705] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6711] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6776] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6803] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6805] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6899] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6922] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6942] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6946] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6948] Config: added 'scan_ssid' value '1'
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6949] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6951] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.6952] Config: added 'psk' value '<hidden>'
Oct 11 08:45:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/110
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.7734] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:45:15 IQ138000 NetworkManager[403]: <info>  [1760172315.7737] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:45:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:45:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:45:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:45:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:45:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:45:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:45:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:45:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:45:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:45:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:45:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:45:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:45:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:45:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:45:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:45:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:45:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:45:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:45:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:45:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:45:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:45:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:45:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:45:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:45:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:45:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:45:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:45:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:45:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:45:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:45:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:45:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:45:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:45:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:45:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:41 IQ138000 NetworkManager[403]: <warn>  [1760172341.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:45:41 IQ138000 NetworkManager[403]: <info>  [1760172341.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:45:41 IQ138000 NetworkManager[403]: <warn>  [1760172341.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:45:41 IQ138000 NetworkManager[403]: <info>  [1760172341.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:45:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/110
Oct 11 08:45:41 IQ138000 NetworkManager[403]: <info>  [1760172341.0682] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:45:41 IQ138000 NetworkManager[403]: <info>  [1760172341.0696] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:45:47 IQ138000 NetworkManager[403]: <info>  [1760172347.4158] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:45:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:45:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:45:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:45:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:45:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:45:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:45:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:45:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:45:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:45:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:45:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:45:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:45:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:45:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:45:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:45:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:45:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:45:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:45:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:45:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:45:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:45:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:45:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:45:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:45:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:45:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:45:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:45:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:45:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:45:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:45:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:45:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:45:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:45:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:45:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:45:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:45:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:45:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:02 IQ138000 npm[3801]: [2025-10-11 08:46:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":48.12,"last_seen":1760172362042,"linkquality":109,"power_outage_count":48745,"temperature":25.18,"voltage":3025}'
Oct 11 08:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:12 IQ138000 wb-watchdog[7276]: [INFO] Interval #150 started. Waiting up to 60 seconds for error...
Oct 11 08:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 08:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:46:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:46:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:46:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:46:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:46:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:46:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:46:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:46:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:46:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:46:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:46:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:46:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:46:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:46:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:46:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:46:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:46:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:46:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:46:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:46:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:46:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:46:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:46:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:46:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:46:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:46:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:46:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:46:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:46:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:46:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:46:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:46:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:46:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:46:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:46:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:46:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:46:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:46:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:46:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.2777] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.2781] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.2786] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.2838] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.2859] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.2878] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3021] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3042] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3060] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3063] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3065] Config: added 'scan_ssid' value '1'
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3066] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3067] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.3068] Config: added 'psk' value '<hidden>'
Oct 11 08:46:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/111
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.4006] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:46:42 IQ138000 NetworkManager[403]: <info>  [1760172402.4010] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:46:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:46:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:46:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:46:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:46:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:46:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:46:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:46:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:46:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:46:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:46:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:46:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:46:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:46:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:46:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:46:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:46:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:46:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:46:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:46:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:46:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:46:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:46:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:46:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:46:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:46:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:46:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:46:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:46:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:46:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:46:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:46:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:46:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:46:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:46:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:46:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:46:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:46:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:46:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:47:08 IQ138000 NetworkManager[403]: <warn>  [1760172428.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:47:08 IQ138000 NetworkManager[403]: <info>  [1760172428.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:47:08 IQ138000 NetworkManager[403]: <warn>  [1760172428.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:47:08 IQ138000 NetworkManager[403]: <info>  [1760172428.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:47:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/111
Oct 11 08:47:08 IQ138000 NetworkManager[403]: <info>  [1760172428.0679] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:47:08 IQ138000 NetworkManager[403]: <info>  [1760172428.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:12 IQ138000 wb-watchdog[7857]: [INFO] Interval #151 started. Waiting up to 60 seconds for error...
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:47:14 IQ138000 NetworkManager[403]: <info>  [1760172434.0531] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:47:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:47:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:47:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:47:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:47:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:47:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:47:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:47:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:47:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:47:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:47:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:47:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:47:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:47:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:47:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:47:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:47:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:47:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:47:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:47:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:47:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:47:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:47:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:47:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:47:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:47:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:47:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:47:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:47:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:47:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:47:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:47:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:47:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:47:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:47:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:47:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:47:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:47:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:47:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:47:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:47:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:47:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:47:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:47:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:47:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:47:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:47:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:47:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:47:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:47:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:47:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:47:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:47:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:47:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:47:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:47:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:47:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:47:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:47:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:47:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:47:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:47:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:47:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:47:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:47:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:47:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:47:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:47:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:47:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:47:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:47:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:47:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:47:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:47:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:47:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:47:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:47:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:47:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:47:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:47:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:48:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:48:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.1751] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.1756] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.1762] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.1849] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.1883] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.1894] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2029] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2062] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2081] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2085] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2087] Config: added 'scan_ssid' value '1'
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2088] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2089] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2090] Config: added 'psk' value '<hidden>'
Oct 11 08:48:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/112
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2754] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:48:09 IQ138000 NetworkManager[403]: <info>  [1760172489.2756] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:48:12 IQ138000 wb-watchdog[8595]: [INFO] Interval #152 started. Waiting up to 60 seconds for error...
Oct 11 08:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 08:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:48:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:48:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:48:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:48:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:48:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:48:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:48:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:48:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:48:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:48:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:48:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:48:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:48:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:48:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:48:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:48:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:48:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:48:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:48:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:48:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:48:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:48:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:48:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:48:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:48:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:48:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:48:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:48:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:48:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:48:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:48:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:48:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:48:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:48:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:48:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:48:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:48:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:48:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:34 IQ138000 NetworkManager[403]: <warn>  [1760172514.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:48:34 IQ138000 NetworkManager[403]: <info>  [1760172514.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:48:34 IQ138000 NetworkManager[403]: <warn>  [1760172514.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:48:34 IQ138000 NetworkManager[403]: <info>  [1760172514.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:48:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/112
Oct 11 08:48:34 IQ138000 NetworkManager[403]: <info>  [1760172514.0653] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:48:34 IQ138000 NetworkManager[403]: <info>  [1760172514.0655] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:39 IQ138000 NetworkManager[403]: <info>  [1760172519.9100] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:48:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:48:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:48:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:48:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:48:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:48:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:48:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:48:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:48:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:48:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:48:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:48:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:48:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:48:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:48:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:48:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:48:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:48:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:48:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:48:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:48:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:48:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:48:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:48:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:48:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:48:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:48:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:48:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:48:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:48:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:48:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:48:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:48:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:48:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:48:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:48:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L1, row count 7183, limit 7042
Oct 11 08:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:49:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:49:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:12 IQ138000 wb-watchdog[9197]: [INFO] Interval #153 started. Waiting up to 60 seconds for error...
Oct 11 08:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:49:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:49:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:49:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:49:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:49:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:49:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:49:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:49:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:49:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:49:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:49:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:49:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:49:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:49:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:49:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:49:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:49:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:49:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:49:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:49:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:49:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:49:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:49:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:49:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:49:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:49:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:49:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:49:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:49:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:49:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:49:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:49:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:49:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:49:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:49:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:49:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:49:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:49:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:49:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:49:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8551] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8556] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8563] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8680] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8697] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8700] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8806] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8827] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8856] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8859] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8860] Config: added 'scan_ssid' value '1'
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8861] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8862] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.8863] Config: added 'psk' value '<hidden>'
Oct 11 08:49:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/113
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.9539] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:49:34 IQ138000 NetworkManager[403]: <info>  [1760172574.9541] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:49:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:49:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9494 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5892 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8441 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:49:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:49:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:49:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:49:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:49:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:49:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:49:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:49:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:49:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:49:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:49:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:49:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:49:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:49:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:49:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:49:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:49:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:49:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:49:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:49:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:49:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:49:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:49:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:49:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:49:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:49:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:49:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:49:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:49:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:49:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:49:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:49:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:49:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:49:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:49:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:49:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:49:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:00 IQ138000 NetworkManager[403]: <warn>  [1760172600.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:50:00 IQ138000 NetworkManager[403]: <info>  [1760172600.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:50:00 IQ138000 NetworkManager[403]: <warn>  [1760172600.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:50:00 IQ138000 NetworkManager[403]: <info>  [1760172600.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:50:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/113
Oct 11 08:50:00 IQ138000 NetworkManager[403]: <info>  [1760172600.0628] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:50:00 IQ138000 NetworkManager[403]: <info>  [1760172600.0630] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:06 IQ138000 NetworkManager[403]: <info>  [1760172606.6273] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 08:50:12 IQ138000 wb-watchdog[9889]: [INFO] Interval #154 started. Waiting up to 60 seconds for error...
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 08:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:50:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:50:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:50:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:50:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:50:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:50:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:50:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:50:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:50:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:50:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:50:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:50:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:50:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:50:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:50:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:50:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:50:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:50:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:50:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:50:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:50:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:50:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:50:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:50:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:50:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:50:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:50:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:50:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:50:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:50:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:50:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:50:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:50:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:50:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:50:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:50:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:50:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:50:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:50:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:50:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:50:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:50:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:50:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:50:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:50:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:50:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:50:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:50:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:50:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:50:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:50:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:50:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:50:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:50:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:50:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:50:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:50:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:50:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:50:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:50:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:50:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:50:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:50:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:50:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:50:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:50:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:50:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:50:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:50:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:50:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:50:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:50:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:50:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:50:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:50:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:50:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:50:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:50:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8760] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8813] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8833] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8885] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8907] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8911] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.8997] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9030] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9050] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9053] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9054] Config: added 'scan_ssid' value '1'
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9055] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9057] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9058] Config: added 'psk' value '<hidden>'
Oct 11 08:51:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/114
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9916] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:51:01 IQ138000 NetworkManager[403]: <info>  [1760172661.9917] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:51:04 IQ138000 npm[3801]: [2025-10-11 08:51:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.91,"last_seen":1760172664005,"linkquality":47,"power_outage_count":25795,"pressure":993.5,"temperature":21.11,"voltage":2995}'
Oct 11 08:51:04 IQ138000 npm[3801]: [2025-10-11 08:51:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.48,"last_seen":1760172664047,"linkquality":47,"power_outage_count":25795,"pressure":993.5,"temperature":21.11,"voltage":2995}'
Oct 11 08:51:04 IQ138000 npm[3801]: [2025-10-11 08:51:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.48,"last_seen":1760172664047,"linkquality":47,"power_outage_count":25795,"pressure":993.2,"temperature":21.11,"voltage":2995}'
Oct 11 08:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:51:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:51:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:12 IQ138000 wb-watchdog[10521]: [INFO] Interval #155 started. Waiting up to 60 seconds for error...
Oct 11 08:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:51:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:51:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:51:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:51:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:51:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:51:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:51:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:51:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:51:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:51:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:51:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:51:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:51:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:51:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:51:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:51:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:51:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:51:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:51:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:51:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:51:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:51:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:51:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:51:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:51:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:51:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:51:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:51:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:51:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:51:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:51:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:51:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:51:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:51:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:51:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:51:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:51:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:51:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:27 IQ138000 NetworkManager[403]: <warn>  [1760172687.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:51:27 IQ138000 NetworkManager[403]: <info>  [1760172687.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:51:27 IQ138000 NetworkManager[403]: <warn>  [1760172687.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:51:27 IQ138000 NetworkManager[403]: <info>  [1760172687.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:51:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/114
Oct 11 08:51:27 IQ138000 NetworkManager[403]: <info>  [1760172687.0678] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:51:27 IQ138000 NetworkManager[403]: <info>  [1760172687.0680] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 08:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:51:32 IQ138000 NetworkManager[403]: <info>  [1760172692.7115] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L2, row count 7183, limit 7042
Oct 11 08:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:51:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:51:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:51:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:51:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:51:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:51:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:51:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:51:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:51:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:51:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:51:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:51:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:51:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:51:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:51:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:51:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:51:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:51:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:51:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:51:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:51:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:51:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:51:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:51:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:51:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:51:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:51:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:51:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:51:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:51:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:51:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:51:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:51:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:51:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:51:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:51:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:51:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:51:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:51:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:51:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:51:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:51:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:51:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:52:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:52:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:12 IQ138000 wb-watchdog[11212]: [INFO] Interval #156 started. Waiting up to 60 seconds for error...
Oct 11 08:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:52:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:52:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:52:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:52:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:52:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:52:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:52:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:52:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:52:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:52:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:52:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:52:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:52:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:52:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:52:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:52:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:52:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:52:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:52:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:52:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:52:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:52:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:52:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:52:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:52:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:52:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:52:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:52:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:52:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:52:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:52:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:52:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:52:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:52:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:52:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:52:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:52:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6142] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6149] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6156] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6229] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6248] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6249] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6428] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6466] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6516] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6534] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6545] Config: added 'scan_ssid' value '1'
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6557] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6572] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.6587] Config: added 'psk' value '<hidden>'
Oct 11 08:52:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/115
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.7375] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:52:27 IQ138000 NetworkManager[403]: <info>  [1760172747.7377] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 08:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:52:53 IQ138000 NetworkManager[403]: <warn>  [1760172773.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:52:53 IQ138000 NetworkManager[403]: <info>  [1760172773.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:52:53 IQ138000 NetworkManager[403]: <warn>  [1760172773.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:52:53 IQ138000 NetworkManager[403]: <info>  [1760172773.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:52:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/115
Oct 11 08:52:53 IQ138000 NetworkManager[403]: <info>  [1760172773.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:52:53 IQ138000 NetworkManager[403]: <info>  [1760172773.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:52:54 IQ138000 npm[3801]: [2025-10-11 08:52:54] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":48.12,"last_seen":1760172774374,"linkquality":102,"power_outage_count":48745,"temperature":25.46,"voltage":3025}'
Oct 11 08:52:54 IQ138000 npm[3801]: [2025-10-11 08:52:54] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":46.1,"last_seen":1760172774385,"linkquality":102,"power_outage_count":48745,"temperature":25.46,"voltage":3025}'
Oct 11 08:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:52:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:52:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:52:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:52:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:52:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:52:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:52:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:52:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:52:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:52:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:52:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:52:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:52:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:52:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:52:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:52:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:52:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:52:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:52:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:52:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:52:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:52:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:52:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:52:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:52:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:52:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:52:55 IQ138000 npm[3801]: [2025-10-11 08:52:55] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.72,"last_seen":1760172775482,"linkquality":61,"power_outage_count":25795,"pressure":993.3,"temperature":21.12,"voltage":3005}'
Oct 11 08:52:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:52:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:52:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:52:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:52:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:52:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:52:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:52:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:52:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:52:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:52:59 IQ138000 NetworkManager[403]: <info>  [1760172779.3723] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:12 IQ138000 wb-watchdog[11815]: [INFO] Interval #157 started. Waiting up to 60 seconds for error...
Oct 11 08:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:53:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:53:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:53:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:53:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:53:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:53:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:53:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:53:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:53:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:53:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:53:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:53:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:53:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:53:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:53:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:53:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:53:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:53:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:53:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:53:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:53:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:53:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:53:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:53:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:53:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:53:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:53:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:53:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:53:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:53:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:53:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:53:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:53:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:53:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:53:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:53:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:53:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:53:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:53:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:53:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:53:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:53:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:53:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:53:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:53:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.3896] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.3903] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.3909] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.3969] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.3997] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4000] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4192] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4224] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4340] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4350] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4352] Config: added 'scan_ssid' value '1'
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4353] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4355] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.4427] Config: added 'psk' value '<hidden>'
Oct 11 08:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:53:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/116
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.5173] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:53:54 IQ138000 NetworkManager[403]: <info>  [1760172834.5175] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:53:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:53:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:53:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:53:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:53:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:53:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:53:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:53:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:53:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:53:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:53:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:53:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:53:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:53:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:53:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:53:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:53:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:53:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:53:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:53:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:53:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:53:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:53:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:53:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:53:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:53:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:53:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:53:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:53:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:53:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:53:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:53:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:53:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:53:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:53:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:12 IQ138000 wb-watchdog[12537]: [INFO] Interval #158 started. Waiting up to 60 seconds for error...
Oct 11 08:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 08:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 08:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:20 IQ138000 NetworkManager[403]: <warn>  [1760172860.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:54:20 IQ138000 NetworkManager[403]: <info>  [1760172860.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:54:20 IQ138000 NetworkManager[403]: <warn>  [1760172860.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:54:20 IQ138000 NetworkManager[403]: <info>  [1760172860.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:54:20 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:54:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/116
Oct 11 08:54:20 IQ138000 NetworkManager[403]: <info>  [1760172860.0690] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:54:20 IQ138000 NetworkManager[403]: <info>  [1760172860.0692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:20 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:54:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:54:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:54:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:54:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:54:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:54:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:54:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:54:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:54:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:54:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:54:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:54:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:54:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:54:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:54:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:54:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:54:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:54:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:54:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:54:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:54:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:54:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:54:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:54:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:54:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:54:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:54:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:54:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:54:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:54:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:54:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:54:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:54:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:54:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:54:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:54:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:54:26 IQ138000 NetworkManager[403]: <info>  [1760172866.1770] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:54:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:54:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:54:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:54:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:54:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:54:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:54:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:54:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:54:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:54:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:54:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:54:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:54:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:54:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:54:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:54:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:54:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:54:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:54:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:54:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:54:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:54:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:54:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:54:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:54:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:54:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:54:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:54:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:54:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:54:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:54:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:54:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:54:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:54:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:54:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:01 IQ138000 CRON[12988]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 08:55:01 IQ138000 CRON[12992]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 08:55:01 IQ138000 CRON[12988]: pam_unix(cron:session): session closed for user root
Oct 11 08:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 08:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:12 IQ138000 wb-watchdog[13160]: [INFO] Interval #159 started. Waiting up to 60 seconds for error...
Oct 11 08:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 08:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:55:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:55:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1517] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1523] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1530] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1580] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1597] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1600] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1683] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1705] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1722] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1725] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1727] Config: added 'scan_ssid' value '1'
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1728] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1729] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:55:21 IQ138000 NetworkManager[403]: <info>  [1760172921.1730] Config: added 'psk' value '<hidden>'
Oct 11 08:55:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/117
Oct 11 08:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:25 IQ138000 NetworkManager[403]: <info>  [1760172925.2572] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:55:25 IQ138000 NetworkManager[403]: <info>  [1760172925.2574] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:55:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:55:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:55:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:55:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:55:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:55:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:55:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:55:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:55:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:55:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:55:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:55:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:55:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:55:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:55:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:55:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:55:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:55:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:55:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:55:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:55:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:55:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:55:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:55:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:55:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:55:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:55:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:55:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:55:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:55:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:55:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:55:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:55:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:55:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:55:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:55:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:46 IQ138000 NetworkManager[403]: <warn>  [1760172946.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:55:46 IQ138000 NetworkManager[403]: <info>  [1760172946.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:55:46 IQ138000 NetworkManager[403]: <warn>  [1760172946.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:55:46 IQ138000 NetworkManager[403]: <info>  [1760172946.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:55:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/117
Oct 11 08:55:46 IQ138000 NetworkManager[403]: <info>  [1760172946.0736] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:55:46 IQ138000 NetworkManager[403]: <info>  [1760172946.0738] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:55:51 IQ138000 NetworkManager[403]: <info>  [1760172951.8502] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:55:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:55:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:55:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:55:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:55:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:55:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:55:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:55:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:55:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:55:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:55:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:55:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:55:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:55:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:55:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:55:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:55:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:55:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:55:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:55:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:55:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:55:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:55:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:55:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:55:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:55:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:55:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:55:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:55:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:55:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:55:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:55:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:55:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:55:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:55:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:55:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:55:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:56:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:56:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:12 IQ138000 wb-watchdog[13815]: [INFO] Interval #160 started. Waiting up to 60 seconds for error...
Oct 11 08:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:56:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:56:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:56:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:56:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:56:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:56:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:56:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:56:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:56:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:56:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:56:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:56:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:56:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:56:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:56:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:56:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:56:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:56:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:56:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:56:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:56:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:56:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:56:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:56:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:56:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:56:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:56:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:56:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:56:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:56:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:56:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:56:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:56:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:56:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:56:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:56:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8610] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8635] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8644] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8714] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8747] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8756] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8875] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8927] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8958] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8971] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8973] Config: added 'scan_ssid' value '1'
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8974] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8976] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.8976] Config: added 'psk' value '<hidden>'
Oct 11 08:56:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/118
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.9864] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:56:46 IQ138000 NetworkManager[403]: <info>  [1760173006.9884] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:56:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:56:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L2, row count 7183, limit 7042
Oct 11 08:56:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:56:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:56:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:56:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:56:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:56:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:56:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:56:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:56:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:56:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:56:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:56:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:56:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:56:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:56:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:56:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:56:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:56:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:56:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:56:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:56:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:56:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:56:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:56:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:56:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:56:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:56:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:56:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:56:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:56:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:56:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:56:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:56:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:56:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:56:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:56:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:12 IQ138000 NetworkManager[403]: <warn>  [1760173032.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:57:12 IQ138000 NetworkManager[403]: <info>  [1760173032.0228] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:57:12 IQ138000 NetworkManager[403]: <warn>  [1760173032.0259] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:57:12 IQ138000 NetworkManager[403]: <info>  [1760173032.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:57:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/118
Oct 11 08:57:12 IQ138000 NetworkManager[403]: <info>  [1760173032.1944] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:57:12 IQ138000 NetworkManager[403]: <info>  [1760173032.1947] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:12 IQ138000 wb-watchdog[14468]: [INFO] Interval #161 started. Waiting up to 60 seconds for error...
Oct 11 08:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:18 IQ138000 NetworkManager[403]: <info>  [1760173038.5847] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:57:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:57:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:57:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:57:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:57:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:57:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:57:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:57:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:57:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:57:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:57:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:57:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:57:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:57:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:57:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:57:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:57:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:57:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:57:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:57:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:57:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:57:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:57:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:57:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:57:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:57:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:57:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:57:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:57:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:57:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:57:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:57:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:57:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:57:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:57:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:57:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:57:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:57:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:57:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:57:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:57:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:57:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:57:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:57:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:57:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:57:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:57:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:57:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:57:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:57:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:57:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:57:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:57:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:57:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:57:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:57:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:57:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:57:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:57:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:57:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:57:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:57:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:57:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:57:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:57:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:57:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:57:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:57:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:57:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:57:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:57:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:57:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:57:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:57:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:57:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:57:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:57:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:57:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:57:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:57:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 08:58:12 IQ138000 wb-watchdog[15174]: [INFO] Interval #162 started. Waiting up to 60 seconds for error...
Oct 11 08:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5287] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5305] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5312] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5376] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5395] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5397] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5490] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5512] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5533] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5536] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5537] Config: added 'scan_ssid' value '1'
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5538] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5539] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.5540] Config: added 'psk' value '<hidden>'
Oct 11 08:58:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/119
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.6332] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:58:13 IQ138000 NetworkManager[403]: <info>  [1760173093.6334] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 08:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:58:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:58:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:20 IQ138000 npm[3801]: [2025-10-11 08:58:20] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":46.1,"last_seen":1760173100784,"linkquality":91,"power_outage_count":48745,"temperature":25.98,"voltage":3025}'
Oct 11 08:58:20 IQ138000 npm[3801]: [2025-10-11 08:58:20] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.38,"last_seen":1760173100797,"linkquality":87,"power_outage_count":48745,"temperature":25.98,"voltage":3025}'
Oct 11 08:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:58:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:58:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:58:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:58:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:58:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:58:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:58:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:58:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:58:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:58:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:58:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:58:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:58:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:58:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:58:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:58:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:58:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:58:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:58:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:58:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:58:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:58:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:58:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:58:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:58:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:58:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:58:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:58:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:58:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:58:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:58:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:58:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:58:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:58:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:58:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:58:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:39 IQ138000 NetworkManager[403]: <warn>  [1760173119.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 08:58:39 IQ138000 NetworkManager[403]: <info>  [1760173119.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 08:58:39 IQ138000 NetworkManager[403]: <warn>  [1760173119.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 08:58:39 IQ138000 NetworkManager[403]: <info>  [1760173119.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 08:58:39 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:58:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/119
Oct 11 08:58:39 IQ138000 NetworkManager[403]: <info>  [1760173119.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 08:58:39 IQ138000 NetworkManager[403]: <info>  [1760173119.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 08:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:58:39 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 08:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:45 IQ138000 NetworkManager[403]: <info>  [1760173125.2582] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 08:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:58:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:58:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:58:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:58:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:58:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:58:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:58:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:58:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:58:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:58:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:58:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:58:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:58:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:58:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:58:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:58:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:58:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:58:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:58:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:58:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:58:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:58:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:58:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:58:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:58:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:58:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:58:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:58:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:58:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:58:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:58:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:58:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:58:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:58:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:58:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:58:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:58:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:58:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:58:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:58:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:58:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 08:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:59:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:59:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:13 IQ138000 wb-watchdog[15784]: [INFO] Interval #163 started. Waiting up to 60 seconds for error...
Oct 11 08:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:59:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:59:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:59:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:59:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:59:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:59:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:59:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:59:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:59:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:59:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:59:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:59:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:59:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:59:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:59:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:59:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:59:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:59:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:59:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:59:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:59:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:59:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:59:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:59:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:59:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:59:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:59:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:59:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:59:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:59:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:59:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:59:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:59:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:59:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:59:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:59:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:59:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 08:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:31 IQ138000 npm[3801]: [2025-10-11 08:59:31] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.12,"last_seen":1760173171128,"linkquality":36,"power_outage_count":35250,"temperature":23.38,"voltage":3075}'
Oct 11 08:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 08:59:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L3, row count 7183, limit 7042
Oct 11 08:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 08:59:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 08:59:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 08:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.1917] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.1922] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.1928] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2006] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2022] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2024] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2130] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2156] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2179] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2182] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2184] Config: added 'scan_ssid' value '1'
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2185] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2186] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 08:59:40 IQ138000 NetworkManager[403]: <info>  [1760173180.2187] Config: added 'psk' value '<hidden>'
Oct 11 08:59:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/120
Oct 11 08:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 08:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4628 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:44 IQ138000 NetworkManager[403]: <info>  [1760173184.3079] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 08:59:44 IQ138000 NetworkManager[403]: <info>  [1760173184.3081] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 08:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 08:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 08:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 08:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 9220 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 08:59:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 08:59:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 08:59:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 08:59:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 08:59:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 08:59:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 08:59:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 08:59:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 08:59:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 08:59:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 08:59:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 08:59:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 08:59:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 08:59:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 08:59:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 08:59:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 08:59:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 08:59:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 08:59:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 08:59:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 08:59:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 08:59:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 08:59:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:59:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 08:59:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 08:59:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 08:59:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:59:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 08:59:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 08:59:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 08:59:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 08:59:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 08:59:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 08:59:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 08:59:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 08:59:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 08:59:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:00:05 IQ138000 NetworkManager[403]: <warn>  [1760173205.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:00:05 IQ138000 NetworkManager[403]: <info>  [1760173205.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:00:05 IQ138000 NetworkManager[403]: <warn>  [1760173205.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:00:05 IQ138000 NetworkManager[403]: <info>  [1760173205.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:00:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/120
Oct 11 09:00:05 IQ138000 NetworkManager[403]: <info>  [1760173205.0674] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:00:05 IQ138000 NetworkManager[403]: <info>  [1760173205.0676] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:00:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:00:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:00:10 IQ138000 NetworkManager[403]: <info>  [1760173210.9107] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:00:13 IQ138000 wb-watchdog[16504]: [INFO] Interval #164 started. Waiting up to 60 seconds for error...
Oct 11 09:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:00:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:00:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:00:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:00:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:00:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:00:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:00:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:00:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:00:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:00:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:00:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:00:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:00:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:00:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:00:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:00:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:00:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:00:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:00:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:00:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:00:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:00:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:00:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:00:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:00:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:00:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:00:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:00:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:00:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:00:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:00:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:00:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:00:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:00:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:00:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:00:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:00:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:00:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:00:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:00:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:00:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:00:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:00:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:00:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:00:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:00:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:00:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:00:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:00:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:00:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:00:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:00:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:00:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:00:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:00:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:00:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:00:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:00:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:00:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:00:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:00:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:00:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:00:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:00:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:00:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:00:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:00:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:00:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:00:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:00:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:00:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:00:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:00:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:00:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:00:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:00:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:00:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:00:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8392] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8397] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8403] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8470] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8492] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8494] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8618] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8654] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8682] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8685] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8687] Config: added 'scan_ssid' value '1'
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8688] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8689] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.8690] Config: added 'psk' value '<hidden>'
Oct 11 09:01:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/121
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.9403] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:01:05 IQ138000 NetworkManager[403]: <info>  [1760173265.9405] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:01:13 IQ138000 wb-watchdog[17108]: [INFO] Interval #165 started. Waiting up to 60 seconds for error...
Oct 11 09:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:01:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:01:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:01:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:01:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:01:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:01:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:01:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:01:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:01:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:01:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:01:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:01:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:01:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:01:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:01:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:01:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:01:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:01:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:01:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:01:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:01:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:01:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:01:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:01:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:01:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:01:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:01:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:01:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:01:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:01:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:01:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:01:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:01:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:01:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:01:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:01:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:01:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:01:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:01:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:01:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:01:31 IQ138000 NetworkManager[403]: <warn>  [1760173291.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:01:31 IQ138000 NetworkManager[403]: <info>  [1760173291.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:01:31 IQ138000 NetworkManager[403]: <warn>  [1760173291.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:01:31 IQ138000 NetworkManager[403]: <info>  [1760173291.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:01:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/121
Oct 11 09:01:31 IQ138000 NetworkManager[403]: <info>  [1760173291.0730] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:01:31 IQ138000 NetworkManager[403]: <info>  [1760173291.0732] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:01:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:01:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:01:37 IQ138000 NetworkManager[403]: <info>  [1760173297.6101] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:47 IQ138000 npm[3801]: [2025-10-11 09:01:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":46.12,"last_seen":1760173307397,"linkquality":54,"power_outage_count":35250,"temperature":23.53,"voltage":3075}'
Oct 11 09:01:47 IQ138000 npm[3801]: [2025-10-11 09:01:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":45.84,"last_seen":1760173307412,"linkquality":54,"power_outage_count":35250,"temperature":23.53,"voltage":3075}'
Oct 11 09:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:01:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:01:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:01:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:01:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:01:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:01:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:01:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:01:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:01:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:01:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:01:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:01:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:01:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:01:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:01:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:01:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:01:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:01:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:01:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:01:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:01:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:01:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:01:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:01:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:01:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:01:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:01:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:01:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:01:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:01:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:01:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:01:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:01:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:01:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:01:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:01:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:01:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:01:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:02:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:02:13 IQ138000 wb-watchdog[17811]: [INFO] Interval #166 started. Waiting up to 60 seconds for error...
Oct 11 09:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:02:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:02:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:02:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:02:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:02:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:02:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:02:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:02:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:02:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:02:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:02:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:02:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:02:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:02:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:02:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:02:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:02:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:02:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:02:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:02:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:02:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:02:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:02:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:02:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:02:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:02:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:02:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:02:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:02:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:02:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:02:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:02:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:02:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:02:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:02:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:02:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:02:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.6974] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.6982] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.6995] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7086] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7108] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7110] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7199] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7227] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7248] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7252] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7253] Config: added 'scan_ssid' value '1'
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7254] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7255] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7256] Config: added 'psk' value '<hidden>'
Oct 11 09:02:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/122
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.7999] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:02:32 IQ138000 NetworkManager[403]: <info>  [1760173352.8001] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:02:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:02:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:02:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:02:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:02:58 IQ138000 NetworkManager[403]: <warn>  [1760173378.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:02:58 IQ138000 NetworkManager[403]: <info>  [1760173378.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:02:58 IQ138000 NetworkManager[403]: <warn>  [1760173378.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:02:58 IQ138000 NetworkManager[403]: <info>  [1760173378.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:02:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/122
Oct 11 09:02:58 IQ138000 NetworkManager[403]: <info>  [1760173378.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:02:58 IQ138000 NetworkManager[403]: <info>  [1760173378.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:02:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:02:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:02:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:02:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:02:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:02:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:02:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:02:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:02:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:02:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:02:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:02:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:02:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:02:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:02:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:02:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:02:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:02:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:02:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:02:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:02:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:02:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:02:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:02:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:02:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:02:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:02:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:02:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:02:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:02:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:02:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:02:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:02:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:02:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:02:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:02:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:02:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:03:04 IQ138000 NetworkManager[403]: <info>  [1760173384.4154] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:03:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:03:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:13 IQ138000 wb-watchdog[18433]: [INFO] Interval #167 started. Waiting up to 60 seconds for error...
Oct 11 09:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:03:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:03:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:03:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:03:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:03:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:03:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:03:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:03:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:03:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:03:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:03:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:03:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:03:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:03:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:03:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:03:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:03:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:03:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:03:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:03:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:03:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:03:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:03:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:03:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:03:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:03:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:03:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:03:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:03:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:03:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:03:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:03:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:03:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:03:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:03:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:03:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:03:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:03:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:03:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:03:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:03:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:03:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.3856] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.3861] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.3866] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.3928] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.3946] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.3948] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4049] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4072] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4118] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4122] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4123] Config: added 'scan_ssid' value '1'
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4124] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4125] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.4137] Config: added 'psk' value '<hidden>'
Oct 11 09:03:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/123
Oct 11 09:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.5036] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:03:59 IQ138000 NetworkManager[403]: <info>  [1760173439.5038] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:03:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:03:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:03:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:03:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:03:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:03:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:03:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:03:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:03:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:03:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:03:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:03:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:03:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:03:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:03:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:03:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:03:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:03:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:03:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:03:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:03:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:03:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:03:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:03:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:03:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:03:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:04:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:04:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:04:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:04:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:04:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:04:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:04:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:04:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:04:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:04:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:04:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:04:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:04:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:04:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:13 IQ138000 wb-watchdog[19119]: [INFO] Interval #168 started. Waiting up to 60 seconds for error...
Oct 11 09:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:25 IQ138000 NetworkManager[403]: <warn>  [1760173465.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:04:25 IQ138000 NetworkManager[403]: <info>  [1760173465.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:04:25 IQ138000 NetworkManager[403]: <warn>  [1760173465.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:04:25 IQ138000 NetworkManager[403]: <info>  [1760173465.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:04:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:04:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/123
Oct 11 09:04:25 IQ138000 NetworkManager[403]: <info>  [1760173465.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:04:25 IQ138000 NetworkManager[403]: <info>  [1760173465.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:04:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:04:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:04:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:04:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:04:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:04:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:04:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:04:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:04:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:04:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:04:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:04:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:04:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:04:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:04:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:04:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:04:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:04:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:04:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:04:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:04:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:04:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:04:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:04:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:04:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:04:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:04:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:04:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:04:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:04:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:04:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:04:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:04:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:04:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:04:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:04:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:04:31 IQ138000 NetworkManager[403]: <info>  [1760173471.1154] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:04:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:04:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:05:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:05:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:05:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:05:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:05:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:05:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:05:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:05:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:05:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:05:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:05:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:05:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:05:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:05:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:05:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:05:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:05:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:05:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:05:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:05:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:05:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:05:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:05:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:05:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:05:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:05:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:05:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:05:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:05:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:05:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:05:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:05:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:05:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:05:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:05:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:05:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:05:01 IQ138000 CRON[19568]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:05:01 IQ138000 CRON[19572]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 09:05:01 IQ138000 CRON[19568]: pam_unix(cron:session): session closed for user root
Oct 11 09:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:05:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:13 IQ138000 wb-watchdog[19752]: [INFO] Interval #169 started. Waiting up to 60 seconds for error...
Oct 11 09:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.1737] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.1770] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.1779] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.1885] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.1915] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.1925] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2040] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2068] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2086] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2090] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2091] Config: added 'scan_ssid' value '1'
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2092] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2096] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:05:26 IQ138000 NetworkManager[403]: <info>  [1760173526.2097] Config: added 'psk' value '<hidden>'
Oct 11 09:05:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/124
Oct 11 09:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:30 IQ138000 NetworkManager[403]: <info>  [1760173530.2842] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:05:30 IQ138000 NetworkManager[403]: <info>  [1760173530.2863] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:05:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:05:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:05:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:05:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:05:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:05:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:05:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:05:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:05:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:05:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:05:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:05:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:05:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:05:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:05:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:05:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:05:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:05:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:05:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:05:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:05:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:05:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:05:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:05:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:05:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:05:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:05:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:05:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:05:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:05:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:05:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:05:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:05:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:05:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:05:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:05:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:34 IQ138000 npm[3801]: [2025-10-11 09:05:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":50.72,"last_seen":1760173534143,"linkquality":69,"power_outage_count":25795,"pressure":993.3,"temperature":21.41,"voltage":3005}'
Oct 11 09:05:34 IQ138000 npm[3801]: [2025-10-11 09:05:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":49.34,"last_seen":1760173534162,"linkquality":65,"power_outage_count":25795,"pressure":993.3,"temperature":21.41,"voltage":3005}'
Oct 11 09:05:34 IQ138000 npm[3801]: [2025-10-11 09:05:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":49.34,"last_seen":1760173534188,"linkquality":69,"power_outage_count":25795,"pressure":993,"temperature":21.41,"voltage":3005}'
Oct 11 09:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:51 IQ138000 NetworkManager[403]: <warn>  [1760173551.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:05:51 IQ138000 NetworkManager[403]: <info>  [1760173551.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:05:51 IQ138000 NetworkManager[403]: <warn>  [1760173551.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:05:51 IQ138000 NetworkManager[403]: <info>  [1760173551.0275] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:05:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/124
Oct 11 09:05:51 IQ138000 NetworkManager[403]: <info>  [1760173551.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:05:51 IQ138000 NetworkManager[403]: <info>  [1760173551.0712] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:56 IQ138000 NetworkManager[403]: <info>  [1760173556.8918] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:05:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:05:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:06:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:06:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:06:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:06:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:06:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:06:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:06:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:06:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:06:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:06:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:06:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:06:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:06:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:06:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:06:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:06:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:06:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:06:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:06:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:06:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:06:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:06:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:06:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:06:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:06:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:06:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:06:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:06:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:06:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:06:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:06:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:06:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:06:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:06:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:06:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:06:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:13 IQ138000 wb-watchdog[20460]: [INFO] Interval #170 started. Waiting up to 60 seconds for error...
Oct 11 09:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:06:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:06:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:06:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:06:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:06:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:06:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:06:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:06:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:06:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:06:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:06:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:06:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:06:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:06:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:06:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:06:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:06:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:06:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:06:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:06:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:06:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:06:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:06:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:06:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:06:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:06:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:06:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:06:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:06:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:06:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:06:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:06:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:06:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:06:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:06:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8744 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8540] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8565] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8574] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8629] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8662] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8676] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8782] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8802] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8819] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8822] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8823] Config: added 'scan_ssid' value '1'
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8824] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8826] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.8826] Config: added 'psk' value '<hidden>'
Oct 11 09:06:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/125
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.9514] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:06:51 IQ138000 NetworkManager[403]: <info>  [1760173611.9517] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:06:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L2, row count 7183, limit 7042
Oct 11 09:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:06:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:06:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:07:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:07:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:07:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:07:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:07:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:07:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:07:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:07:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:07:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:07:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:07:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:07:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:07:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:07:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:07:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:07:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:07:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:07:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:07:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:07:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:07:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:07:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:07:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:07:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:07:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:07:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:07:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:07:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:07:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:07:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:07:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:07:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:07:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:07:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:07:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:07:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:07:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:07:13 IQ138000 wb-watchdog[21052]: [INFO] Interval #171 started. Waiting up to 60 seconds for error...
Oct 11 09:07:17 IQ138000 NetworkManager[403]: <warn>  [1760173637.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:07:17 IQ138000 NetworkManager[403]: <info>  [1760173637.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:07:17 IQ138000 NetworkManager[403]: <warn>  [1760173637.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:07:17 IQ138000 NetworkManager[403]: <info>  [1760173637.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:07:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/125
Oct 11 09:07:17 IQ138000 NetworkManager[403]: <info>  [1760173637.0692] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:07:17 IQ138000 NetworkManager[403]: <info>  [1760173637.0694] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:07:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:07:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:07:22 IQ138000 NetworkManager[403]: <info>  [1760173642.6551] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:07:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:07:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:07:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:07:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:07:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:07:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:07:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:07:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:07:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:07:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:07:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:07:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:07:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:07:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:07:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:07:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:07:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:07:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:07:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:07:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:07:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:07:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:07:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:07:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:07:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:07:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:07:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:07:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:07:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:07:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:07:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:07:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:07:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:07:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:07:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:07:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:08:01 IQ138000 CRON[21585]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:08:01 IQ138000 CRON[21591]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 09:08:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:08:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:08:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:08:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:08:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:08:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:08:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:08:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:08:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:08:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:08:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:08:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:08:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:08:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:08:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:08:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:08:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:08:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:08:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:08:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:08:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:08:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:08:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:08:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:08:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:08:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:08:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:08:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:08:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:08:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:08:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:08:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:08:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:08:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:08:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:08:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:08:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:08:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:08:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:07 IQ138000 sSMTP[21610]: Unable to locate mail
Oct 11 09:08:07 IQ138000 cron[21610]: sendmail: Cannot open mail:25
Oct 11 09:08:07 IQ138000 sSMTP[21610]: Cannot open mail:25
Oct 11 09:08:07 IQ138000 CRON[21585]: (root) MAIL (mailed 368 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 09:08:07 IQ138000 CRON[21585]: pam_unix(cron:session): session closed for user root
Oct 11 09:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:13 IQ138000 wb-watchdog[21789]: [INFO] Interval #172 started. Waiting up to 60 seconds for error...
Oct 11 09:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7799] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7804] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7818] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7871] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7891] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7893] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7976] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.7997] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.8016] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.8019] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.8020] Config: added 'scan_ssid' value '1'
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.8021] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.8022] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.8023] Config: added 'psk' value '<hidden>'
Oct 11 09:08:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/126
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.9004] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:08:17 IQ138000 NetworkManager[403]: <info>  [1760173697.9006] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:08:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:08:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:08:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:08:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:08:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:08:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:08:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:08:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:08:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:08:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:08:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:08:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:08:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:08:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:08:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:08:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:08:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:08:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:08:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:08:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:08:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:08:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:08:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:08:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:08:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:08:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:08:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:08:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:08:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:08:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:08:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:08:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:08:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:08:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:08:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:08:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:08:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:08:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:08:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:08:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:08:43 IQ138000 NetworkManager[403]: <warn>  [1760173723.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:08:43 IQ138000 NetworkManager[403]: <info>  [1760173723.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:08:43 IQ138000 NetworkManager[403]: <warn>  [1760173723.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:08:43 IQ138000 NetworkManager[403]: <info>  [1760173723.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:08:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/126
Oct 11 09:08:43 IQ138000 NetworkManager[403]: <info>  [1760173723.0795] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:08:43 IQ138000 NetworkManager[403]: <info>  [1760173723.0797] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:49 IQ138000 NetworkManager[403]: <info>  [1760173729.5107] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:08:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L3, row count 7183, limit 7042
Oct 11 09:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:09:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:09:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:09:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:09:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:09:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:09:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:09:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:09:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:09:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:09:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:09:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:09:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:09:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:09:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:09:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:09:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:09:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:09:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:09:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:09:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:09:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:09:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:09:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:09:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:09:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:09:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:09:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:09:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:09:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:09:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:09:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:09:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:09:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:09:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:09:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:09:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:09:13 IQ138000 wb-watchdog[22389]: [INFO] Interval #173 started. Waiting up to 60 seconds for error...
Oct 11 09:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:09:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:09:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:09:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:09:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:09:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:09:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:09:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:09:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:09:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:09:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:09:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:09:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:09:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:09:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:09:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:09:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:09:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:09:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:09:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:09:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:09:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:09:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:09:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:09:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:09:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:09:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:09:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:09:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:09:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:09:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:09:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:09:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:09:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:09:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:09:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:09:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:09:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L3, row count 7183, limit 7042
Oct 11 09:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3344] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3348] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3354] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3461] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3476] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3478] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3585] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3607] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3628] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3632] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3633] Config: added 'scan_ssid' value '1'
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3634] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3635] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.3636] Config: added 'psk' value '<hidden>'
Oct 11 09:09:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/127
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.4419] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:09:44 IQ138000 NetworkManager[403]: <info>  [1760173784.4421] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:09:58 IQ138000 npm[3801]: [2025-10-11 09:09:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.38,"last_seen":1760173798552,"linkquality":98,"power_outage_count":48745,"temperature":26.48,"voltage":3025}'
Oct 11 09:09:58 IQ138000 npm[3801]: [2025-10-11 09:09:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":42.14,"last_seen":1760173798575,"linkquality":102,"power_outage_count":48745,"temperature":26.48,"voltage":3025}'
Oct 11 09:09:58 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760173978625,"cmd_timestamp_ms":1760173798625,"source":"regulation"}
Oct 11 09:09:58 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760173978625,"cmd_timestamp_ms":1760173798625,"source":"regulation"}
Oct 11 09:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:09:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:09:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:09:59 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 09:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:10:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:10:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:10:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:10:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:10:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:10:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:10:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:10:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:10:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:10:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:10:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:10:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:10:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:10:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:10:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:10:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:10:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:10:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:10:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:10:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:10:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:10:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:10:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:10:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:10:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:10:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:10:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:10:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:10:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:10:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:10:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:10:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:10:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:10:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:10:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:10:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:10:04 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 09:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:10 IQ138000 NetworkManager[403]: <warn>  [1760173810.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:10:10 IQ138000 NetworkManager[403]: <info>  [1760173810.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:10:10 IQ138000 NetworkManager[403]: <warn>  [1760173810.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:10:10 IQ138000 NetworkManager[403]: <info>  [1760173810.0251] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:10:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:10:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/127
Oct 11 09:10:10 IQ138000 NetworkManager[403]: <info>  [1760173810.0633] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:10:10 IQ138000 NetworkManager[403]: <info>  [1760173810.0635] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:10:13 IQ138000 wb-watchdog[23089]: [INFO] Interval #174 started. Waiting up to 60 seconds for error...
Oct 11 09:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:10:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:10:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:10:16 IQ138000 NetworkManager[403]: <info>  [1760173816.0582] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:10:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:10:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:10:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:10:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:10:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:10:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:10:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:10:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:10:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:10:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:10:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:10:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:10:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:10:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:10:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:10:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:10:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:10:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:10:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:10:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:10:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:10:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:10:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:10:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:10:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:10:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:10:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:10:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:10:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:10:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:10:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:10:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:10:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:10:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:10:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:10:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:10:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:10:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:10:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L3, row count 7183, limit 7042
Oct 11 09:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:11:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:11:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:11:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:11:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:11:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:11:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:11:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:11:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:11:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:11:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:11:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:11:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:11:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:11:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:11:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:11:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:11:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:11:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:11:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:11:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:11:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:11:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:11:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:11:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:11:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:11:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:11:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:11:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:11:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:11:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:11:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:11:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:11:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:11:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:11:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:11:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:11:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9479] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9491] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9496] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9555] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9579] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9581] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9733] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9755] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9778] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9783] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9784] Config: added 'scan_ssid' value '1'
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9785] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9787] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:11:10 IQ138000 NetworkManager[403]: <info>  [1760173870.9788] Config: added 'psk' value '<hidden>'
Oct 11 09:11:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/128
Oct 11 09:11:11 IQ138000 NetworkManager[403]: <info>  [1760173871.0512] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:11:11 IQ138000 NetworkManager[403]: <info>  [1760173871.0514] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:11:13 IQ138000 wb-watchdog[23714]: [INFO] Interval #175 started. Waiting up to 60 seconds for error...
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:15 IQ138000 NetworkManager[403]: <info>  [1760173875.0426] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:11:15 IQ138000 NetworkManager[403]: <info>  [1760173875.0428] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:23 IQ138000 NetworkManager[403]: <info>  [1760173883.4551] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:11:23 IQ138000 NetworkManager[403]: <info>  [1760173883.4553] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:11:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:11:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:11:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:11:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:11:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:11:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:11:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:11:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:11:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:11:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:11:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:11:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:11:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:11:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:11:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:11:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:11:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:11:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:11:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:11:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:11:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:11:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:11:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:11:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:11:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:11:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:11:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:11:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:11:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:11:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:11:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:11:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:11:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:11:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:11:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:11:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:36 IQ138000 NetworkManager[403]: <warn>  [1760173896.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:11:36 IQ138000 NetworkManager[403]: <info>  [1760173896.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:11:36 IQ138000 NetworkManager[403]: <warn>  [1760173896.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:11:36 IQ138000 NetworkManager[403]: <info>  [1760173896.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:11:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/128
Oct 11 09:11:36 IQ138000 NetworkManager[403]: <info>  [1760173896.0679] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:11:36 IQ138000 NetworkManager[403]: <info>  [1760173896.0681] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:41 IQ138000 NetworkManager[403]: <info>  [1760173901.7122] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:11:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:11:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:12:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:12:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:12:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:12:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:12:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:12:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:12:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:12:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:12:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:12:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:12:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:12:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:12:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:12:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:12:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:12:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:12:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:12:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:12:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:12:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:12:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:12:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:12:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:12:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:12:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:12:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:12:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:12:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:12:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:12:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:12:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:12:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:12:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:12:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:12:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:12:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:12:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:12:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:12:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:12:13 IQ138000 wb-watchdog[24407]: [INFO] Interval #176 started. Waiting up to 60 seconds for error...
Oct 11 09:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:12:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:12:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:12:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:12:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:12:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:12:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:12:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:12:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:12:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:12:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:12:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:12:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:12:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:12:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:12:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:12:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:12:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:12:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:12:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:12:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:12:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:12:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:12:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:12:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:12:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:12:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:12:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:12:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:12:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:12:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:12:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:12:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:12:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:12:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:12:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:12:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6299] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6304] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6318] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6390] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6410] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6412] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6527] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6556] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6578] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6582] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6587] Config: added 'scan_ssid' value '1'
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6588] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6590] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.6591] Config: added 'psk' value '<hidden>'
Oct 11 09:12:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/129
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.7289] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:12:36 IQ138000 NetworkManager[403]: <info>  [1760173956.7291] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:13:02 IQ138000 NetworkManager[403]: <warn>  [1760173982.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:13:02 IQ138000 NetworkManager[403]: <info>  [1760173982.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:13:02 IQ138000 NetworkManager[403]: <warn>  [1760173982.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:13:02 IQ138000 NetworkManager[403]: <info>  [1760173982.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:13:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/129
Oct 11 09:13:02 IQ138000 NetworkManager[403]: <info>  [1760173982.0720] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:13:02 IQ138000 NetworkManager[403]: <info>  [1760173982.0722] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:13:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:13:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:13:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:13:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:13:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:13:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:13:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:13:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:13:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:13:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:13:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:13:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:13:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:13:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:13:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:13:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:13:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:13:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:13:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:13:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:13:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:13:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:13:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:13:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:13:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:13:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:13:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:13:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:13:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:13:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:13:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:13:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:13:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:13:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:13:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:13:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:13:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:13:08 IQ138000 NetworkManager[403]: <info>  [1760173988.3534] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:13:13 IQ138000 wb-watchdog[25032]: [INFO] Interval #177 started. Waiting up to 60 seconds for error...
Oct 11 09:13:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:13:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:13:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:13:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:13:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:13:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:13:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:13:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:13:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:13:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:13:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:13:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:13:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:13:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:13:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:13:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:13:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:13:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:13:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:13:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:13:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:13:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:13:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:13:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:13:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:13:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:13:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:13:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:13:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:13:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:13:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:13:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:13:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:13:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:13:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:13:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:13:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:13:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:13:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:13:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:13:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:13:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2610] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2615] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2621] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2692] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2711] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2714] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2891] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2912] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2930] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2933] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2934] Config: added 'scan_ssid' value '1'
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2935] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2936] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.2937] Config: added 'psk' value '<hidden>'
Oct 11 09:14:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/130
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.3706] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:14:03 IQ138000 NetworkManager[403]: <info>  [1760174043.3709] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:14:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:14:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:14:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:14:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:14:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:14:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:14:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:14:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:14:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:14:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:14:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:14:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:14:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:14:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:14:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:14:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:14:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:14:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:14:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:14:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:14:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:14:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:14:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:14:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:14:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:14:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:14:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:14:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:14:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:14:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:14:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:14:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:14:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:14:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:14:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:13 IQ138000 wb-watchdog[25727]: [INFO] Interval #178 started. Waiting up to 60 seconds for error...
Oct 11 09:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:14:29 IQ138000 NetworkManager[403]: <warn>  [1760174069.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:14:29 IQ138000 NetworkManager[403]: <info>  [1760174069.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:14:29 IQ138000 NetworkManager[403]: <warn>  [1760174069.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:14:29 IQ138000 NetworkManager[403]: <info>  [1760174069.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:14:29 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8744 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:14:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/130
Oct 11 09:14:29 IQ138000 NetworkManager[403]: <info>  [1760174069.0772] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:14:29 IQ138000 NetworkManager[403]: <info>  [1760174069.0774] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:29 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:14:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:14:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:14:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:14:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:14:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:14:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:14:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:14:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:14:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:14:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:14:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:14:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:14:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:14:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:14:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:14:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:14:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:14:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:14:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:14:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:14:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:14:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:14:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:14:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:14:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:14:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:14:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:14:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:14:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:14:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:14:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:14:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:14:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:14:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:14:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:14:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:14:35 IQ138000 NetworkManager[403]: <info>  [1760174075.0287] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:14:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:14:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:14:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L2, row count 7183, limit 7042
Oct 11 09:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:15:01 IQ138000 CRON[26155]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:15:01 IQ138000 CRON[26159]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 09:15:01 IQ138000 CRON[26155]: pam_unix(cron:session): session closed for user root
Oct 11 09:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:15:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:15:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:15:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:15:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:15:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:15:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:15:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:15:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:15:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:15:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:15:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:15:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:15:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:15:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:15:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:15:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:15:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:15:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:15:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:15:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:15:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:15:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:15:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:15:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:15:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:15:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:15:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:15:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:15:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:15:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:15:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:15:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:15:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:15:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:15:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:15:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:15:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:13 IQ138000 wb-watchdog[26342]: [INFO] Interval #179 started. Waiting up to 60 seconds for error...
Oct 11 09:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:15:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9801] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9806] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9812] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9875] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9895] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9897] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:15:29 IQ138000 NetworkManager[403]: <info>  [1760174129.9977] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0006] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0033] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0036] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0037] Config: added 'scan_ssid' value '1'
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0040] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0041] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:15:30 IQ138000 NetworkManager[403]: <info>  [1760174130.0042] Config: added 'psk' value '<hidden>'
Oct 11 09:15:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/131
Oct 11 09:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:33 IQ138000 NetworkManager[403]: <info>  [1760174133.0855] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:15:33 IQ138000 NetworkManager[403]: <info>  [1760174133.0857] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:15:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:15:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:15:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:15:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:15:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:15:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:15:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:15:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:15:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:15:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:15:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:15:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:15:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:15:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:15:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:15:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:15:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:15:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:15:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:15:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:15:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:15:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:15:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:15:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:15:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:15:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:15:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:15:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:15:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:15:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:15:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:15:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:15:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:15:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:15:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:15:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:15:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:15:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:55 IQ138000 NetworkManager[403]: <warn>  [1760174155.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:15:55 IQ138000 NetworkManager[403]: <info>  [1760174155.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:15:55 IQ138000 NetworkManager[403]: <warn>  [1760174155.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:15:55 IQ138000 NetworkManager[403]: <info>  [1760174155.0311] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:15:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/131
Oct 11 09:15:55 IQ138000 NetworkManager[403]: <info>  [1760174155.0848] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:15:55 IQ138000 NetworkManager[403]: <info>  [1760174155.0850] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 09:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:16:00 IQ138000 NetworkManager[403]: <info>  [1760174160.7207] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:16:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:16:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:16:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:16:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:16:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:16:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:16:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:16:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:16:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:16:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:16:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:16:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:16:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:16:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:16:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:16:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:16:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:16:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:16:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:16:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:16:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:16:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:16:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:16:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:16:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:16:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:16:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:16:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:16:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:16:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:16:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:16:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:16:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:16:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:16:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:16:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:16:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:16:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:16:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:16:13 IQ138000 wb-watchdog[27058]: [INFO] Interval #180 started. Waiting up to 60 seconds for error...
Oct 11 09:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:16:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:25 IQ138000 npm[3801]: [2025-10-11 09:16:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":42.14,"last_seen":1760174185213,"linkquality":109,"power_outage_count":48745,"temperature":26.99,"voltage":3025}'
Oct 11 09:16:25 IQ138000 npm[3801]: [2025-10-11 09:16:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.43,"last_seen":1760174185223,"linkquality":105,"power_outage_count":48745,"temperature":26.99,"voltage":3025}'
Oct 11 09:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:16:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:16:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:16:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:16:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:16:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:16:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:16:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:16:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:16:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:16:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:16:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:16:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:16:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:16:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:16:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:16:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:16:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:16:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:16:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:16:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:16:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:16:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:16:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:16:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:16:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:16:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:16:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:16:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:16:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:16:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:16:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:16:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:16:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:16:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:16:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:16:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:16:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5534] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5540] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5546] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5675] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5693] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5695] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5790] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5814] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5837] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5840] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5842] Config: added 'scan_ssid' value '1'
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5842] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5846] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.5847] Config: added 'psk' value '<hidden>'
Oct 11 09:16:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/132
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.6572] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:16:55 IQ138000 NetworkManager[403]: <info>  [1760174215.6575] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:16:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:16:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:01 IQ138000 CRON[27467]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:01 IQ138000 CRON[27472]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 09:17:01 IQ138000 CRON[27467]: pam_unix(cron:session): session closed for user root
Oct 11 09:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:17:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:17:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:17:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:17:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:17:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:17:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:17:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:17:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:17:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:17:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:17:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:17:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:17:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:17:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:17:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:17:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:17:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:17:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:17:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:17:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:17:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:17:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:17:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:17:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:17:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:17:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:17:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:17:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:17:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:17:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:17:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:17:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:17:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:17:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:17:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:17:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:17:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:17:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:17:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-watchdog[27665]: [INFO] Interval #181 started. Waiting up to 60 seconds for error...
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:17:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:17:21 IQ138000 NetworkManager[403]: <warn>  [1760174241.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:17:21 IQ138000 NetworkManager[403]: <info>  [1760174241.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:17:21 IQ138000 NetworkManager[403]: <warn>  [1760174241.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:17:21 IQ138000 NetworkManager[403]: <info>  [1760174241.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:17:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/132
Oct 11 09:17:21 IQ138000 NetworkManager[403]: <info>  [1760174241.0685] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:17:21 IQ138000 NetworkManager[403]: <info>  [1760174241.0687] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:17:27 IQ138000 NetworkManager[403]: <info>  [1760174247.2920] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:17:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:17:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:17:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:17:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:17:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:17:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:17:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:17:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:17:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:17:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:17:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:17:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:17:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:17:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:17:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:17:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:17:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:17:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:17:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:17:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:17:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:17:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:17:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:17:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:17:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:17:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:17:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:17:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:17:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:17:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:17:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:17:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:17:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:17:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:17:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:17:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:17:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:17:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:17:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:18:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:18:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:18:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:18:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:18:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:18:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:18:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:18:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:18:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:18:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:18:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:18:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:18:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:18:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:18:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:18:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:18:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:18:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:18:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:18:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:18:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:18:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:18:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:18:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:18:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:18:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:18:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:18:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:18:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:18:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:18:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:18:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:18:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:18:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:18:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:18:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:18:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:18:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:18:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:13 IQ138000 wb-watchdog[28376]: [INFO] Interval #182 started. Waiting up to 60 seconds for error...
Oct 11 09:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.1866] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.1871] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.1877] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.1941] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.1960] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.1962] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2047] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2066] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2082] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2085] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2086] Config: added 'scan_ssid' value '1'
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2086] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2087] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2088] Config: added 'psk' value '<hidden>'
Oct 11 09:18:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/133
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2837] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:18:22 IQ138000 NetworkManager[403]: <info>  [1760174302.2839] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:18:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:18:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:18:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:18:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:18:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:18:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:18:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:18:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:18:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:18:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:18:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:18:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:18:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:18:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:18:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:18:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:18:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:18:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:18:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:18:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:18:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:18:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:18:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:18:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:18:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:18:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:18:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:18:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:18:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:18:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:18:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:18:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:18:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:18:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:18:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:47 IQ138000 NetworkManager[403]: <warn>  [1760174327.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:18:47 IQ138000 NetworkManager[403]: <info>  [1760174327.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:18:47 IQ138000 NetworkManager[403]: <warn>  [1760174327.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:18:47 IQ138000 NetworkManager[403]: <info>  [1760174327.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:18:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/133
Oct 11 09:18:47 IQ138000 NetworkManager[403]: <info>  [1760174327.0768] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:18:47 IQ138000 NetworkManager[403]: <info>  [1760174327.0770] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:52 IQ138000 NetworkManager[403]: <info>  [1760174332.9285] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:18:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:18:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:18:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:18:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:19:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:19:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:19:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:19:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:19:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:19:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:19:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:19:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:19:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:19:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:19:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:19:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:19:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:19:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:19:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:19:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:19:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:19:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:19:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:19:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:19:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:19:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:19:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:19:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:19:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:19:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:19:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:19:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:19:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:19:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:19:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:19:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:19:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:19:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:19:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:19:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:19:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:19:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:19:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:13 IQ138000 wb-watchdog[28984]: [INFO] Interval #183 started. Waiting up to 60 seconds for error...
Oct 11 09:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:19:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:19:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:19:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:19:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:19:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:19:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:19:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:19:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:19:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:19:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:19:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:19:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:19:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:19:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:19:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:19:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:19:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:19:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:19:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:19:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:19:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:19:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:19:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:19:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:19:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:19:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:19:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:19:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:19:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:19:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:19:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:19:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:19:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:19:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:19:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:19:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L2, row count 7183, limit 7042
Oct 11 09:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:19:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:19:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8084] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8089] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8095] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8193] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8214] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8217] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8318] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8345] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8369] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8373] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8374] Config: added 'scan_ssid' value '1'
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8376] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8378] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.8379] Config: added 'psk' value '<hidden>'
Oct 11 09:19:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/134
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.9163] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:19:47 IQ138000 NetworkManager[403]: <info>  [1760174387.9165] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:20:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:20:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:20:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:20:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:20:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:20:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:20:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:20:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:20:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:20:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:20:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:20:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:20:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:20:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:20:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:20:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:20:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:20:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:20:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:20:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:20:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:20:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:20:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:20:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:20:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:20:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:20:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:20:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:20:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:20:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:20:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:20:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:20:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:20:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:20:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:20:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:20:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:20:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:20:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:20:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:20:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:20:13 IQ138000 NetworkManager[403]: <warn>  [1760174413.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:20:13 IQ138000 NetworkManager[403]: <info>  [1760174413.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:20:13 IQ138000 NetworkManager[403]: <warn>  [1760174413.0276] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:20:13 IQ138000 NetworkManager[403]: <info>  [1760174413.0312] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:20:13 IQ138000 NetworkManager[403]: <info>  [1760174413.0315] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:20:13 IQ138000 NetworkManager[403]: <info>  [1760174413.0334] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:20:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/134
Oct 11 09:20:13 IQ138000 wb-watchdog[29686]: [INFO] Interval #184 started. Waiting up to 60 seconds for error...
Oct 11 09:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:19 IQ138000 NetworkManager[403]: <info>  [1760174419.5867] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:20:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:20:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:20:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:20:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:20:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:20:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:20:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:20:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:20:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:20:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:20:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:20:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:20:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:20:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:20:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:20:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:20:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:20:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:20:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:20:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:20:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:20:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:20:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:20:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:20:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:20:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:20:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:20:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:20:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:20:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:20:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:20:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:20:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:20:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:20:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:20:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:20:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:20:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:21:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:21:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:21:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:21:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:21:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:21:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:21:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:21:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:21:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:21:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:21:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:21:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:21:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:21:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:21:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:21:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:21:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:21:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:21:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:21:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:21:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:21:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:21:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:21:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:21:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:21:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:21:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:21:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:21:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:21:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:21:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:21:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:21:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:21:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:21:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:21:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:21:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:13 IQ138000 wb-watchdog[30300]: [INFO] Interval #185 started. Waiting up to 60 seconds for error...
Oct 11 09:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5246] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5252] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5258] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5310] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5332] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5334] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5513] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5532] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5549] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5553] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5554] Config: added 'scan_ssid' value '1'
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5555] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5556] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.5557] Config: added 'psk' value '<hidden>'
Oct 11 09:21:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/135
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.6256] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:21:14 IQ138000 NetworkManager[403]: <info>  [1760174474.6258] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:21:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:21:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:21:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:21:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:21:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:21:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:21:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:21:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:21:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:21:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:21:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:21:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:21:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:21:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:21:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:21:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:21:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:21:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:21:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:21:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:21:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:21:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:21:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:21:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:21:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:21:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:21:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:21:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:21:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:21:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:21:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:21:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:21:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:21:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:21:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:21:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:21:40 IQ138000 NetworkManager[403]: <warn>  [1760174500.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:21:40 IQ138000 NetworkManager[403]: <info>  [1760174500.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:21:40 IQ138000 NetworkManager[403]: <warn>  [1760174500.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:21:40 IQ138000 NetworkManager[403]: <info>  [1760174500.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:21:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/135
Oct 11 09:21:40 IQ138000 NetworkManager[403]: <info>  [1760174500.0749] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:21:40 IQ138000 NetworkManager[403]: <info>  [1760174500.0752] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:21:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:46 IQ138000 NetworkManager[403]: <info>  [1760174506.2534] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:21:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:21:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:22:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:22:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:22:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:22:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:22:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:22:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:22:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:22:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:22:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:22:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:22:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:22:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:22:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:22:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:22:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:22:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:22:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:22:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:22:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:22:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:22:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:22:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:22:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:22:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:22:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:22:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:22:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:22:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:22:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:22:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:22:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:22:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:22:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:22:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:22:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:22:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:13 IQ138000 wb-watchdog[31002]: [INFO] Interval #186 started. Waiting up to 60 seconds for error...
Oct 11 09:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:22:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:22:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:22:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:22:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:22:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:22:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:22:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:22:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:22:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:22:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:22:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:22:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:22:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:22:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:22:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:22:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:22:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:22:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:22:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:22:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:22:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:22:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:22:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:22:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:22:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:22:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:22:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:22:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:22:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:22:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:22:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:22:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:22:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:22:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:22:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:22:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:22:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:22:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:22:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3126] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3131] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3136] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3222] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3242] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3246] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3389] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3410] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3428] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3432] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3433] Config: added 'scan_ssid' value '1'
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3434] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3435] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.3436] Config: added 'psk' value '<hidden>'
Oct 11 09:22:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/136
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.4102] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:22:41 IQ138000 NetworkManager[403]: <info>  [1760174561.4105] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:22:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:22:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:22:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:07 IQ138000 NetworkManager[403]: <warn>  [1760174587.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:23:07 IQ138000 NetworkManager[403]: <info>  [1760174587.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:23:07 IQ138000 NetworkManager[403]: <warn>  [1760174587.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:23:07 IQ138000 NetworkManager[403]: <info>  [1760174587.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:23:07 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:23:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/136
Oct 11 09:23:07 IQ138000 NetworkManager[403]: <info>  [1760174587.0660] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:23:07 IQ138000 NetworkManager[403]: <info>  [1760174587.0662] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:23:07 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:23:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:23:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:23:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:23:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:23:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:23:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:23:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:23:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:23:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:23:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:23:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:23:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:23:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:23:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:23:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:23:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:23:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:23:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:23:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:23:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:23:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:23:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:23:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:23:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:23:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:23:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:23:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:23:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:23:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:23:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:23:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:23:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:23:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:23:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:23:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:23:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:23:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:13 IQ138000 NetworkManager[403]: <info>  [1760174593.0652] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:23:13 IQ138000 wb-watchdog[31612]: [INFO] Interval #187 started. Waiting up to 60 seconds for error...
Oct 11 09:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:23:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:23:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:23:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:23:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 8974 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:23:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:23:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:23:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:23:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:23:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:23:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:23:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:23:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:23:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:23:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:23:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:23:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:23:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:23:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:23:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:23:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:23:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:23:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:23:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:23:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:23:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:23:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:23:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:23:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:23:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:23:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:23:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:23:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:23:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:23:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:23:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:23:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:23:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:23:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:23:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:23:42 IQ138000 npm[3801]: [2025-10-11 09:23:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.43,"last_seen":1760174622028,"linkquality":102,"power_outage_count":48745,"temperature":27.52,"voltage":3025}'
Oct 11 09:23:42 IQ138000 npm[3801]: [2025-10-11 09:23:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.51,"last_seen":1760174622043,"linkquality":98,"power_outage_count":48745,"temperature":27.52,"voltage":3025}'
Oct 11 09:23:42 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760174802103,"cmd_timestamp_ms":1760174622103,"source":"regulation"}
Oct 11 09:23:42 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760174802103,"cmd_timestamp_ms":1760174622103,"source":"regulation"}
Oct 11 09:23:43 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 09:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:23:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:48 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 09:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:23:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:23:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.8918] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.8951] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.8988] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9052] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9100] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9102] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9216] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9242] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:24:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:24:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9277] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9296] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9299] Config: added 'scan_ssid' value '1'
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9300] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9301] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:24:07 IQ138000 NetworkManager[403]: <info>  [1760174647.9302] Config: added 'psk' value '<hidden>'
Oct 11 09:24:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/137
Oct 11 09:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:24:08 IQ138000 NetworkManager[403]: <info>  [1760174648.0033] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:24:08 IQ138000 NetworkManager[403]: <info>  [1760174648.0035] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:24:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:24:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:24:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:24:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:24:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:24:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:24:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:24:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:24:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:24:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:24:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:24:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:24:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:24:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:24:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:24:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:24:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:24:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:24:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:24:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:24:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:24:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:24:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:24:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:24:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:24:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:24:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:24:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:24:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:24:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:24:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:24:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:24:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:24:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:24:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:24:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:13 IQ138000 wb-watchdog[32321]: [INFO] Interval #188 started. Waiting up to 60 seconds for error...
Oct 11 09:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:24:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:24:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:33 IQ138000 NetworkManager[403]: <warn>  [1760174673.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:24:33 IQ138000 NetworkManager[403]: <info>  [1760174673.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:24:33 IQ138000 NetworkManager[403]: <warn>  [1760174673.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:24:33 IQ138000 NetworkManager[403]: <info>  [1760174673.0286] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:24:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/137
Oct 11 09:24:33 IQ138000 NetworkManager[403]: <info>  [1760174673.0835] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:24:33 IQ138000 NetworkManager[403]: <info>  [1760174673.0837] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:24:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:24:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:24:38 IQ138000 NetworkManager[403]: <info>  [1760174678.6489] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:24:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:24:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:24:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:24:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:24:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:24:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:24:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:24:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:24:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:24:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:24:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:24:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:24:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:24:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:24:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:24:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:24:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:24:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:24:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:24:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:24:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:24:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:24:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:24:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:24:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:24:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:24:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:24:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:24:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:24:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:24:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:24:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:24:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:24:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:24:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:24:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:24:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:24:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:24:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L1, row count 7183, limit 7042
Oct 11 09:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:01 IQ138000 CRON[32752]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:25:01 IQ138000 CRON[32762]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 09:25:01 IQ138000 CRON[32752]: pam_unix(cron:session): session closed for user root
Oct 11 09:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:25:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:25:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:25:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:25:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:25:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:25:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:25:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:25:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:25:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:25:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:25:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:25:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:25:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:25:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:25:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:25:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:25:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:25:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:25:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:25:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:25:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:25:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:25:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:25:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:25:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:25:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:25:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:25:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:25:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:25:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:25:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:25:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:25:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:25:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:25:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:25:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:25:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:25:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:25:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:25:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-watchdog[491]: [INFO] Interval #189 started. Waiting up to 60 seconds for error...
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.6695] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.6701] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.6707] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.6815] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.6844] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.6857] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7126] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7171] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7210] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7214] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7224] Config: added 'scan_ssid' value '1'
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7225] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7226] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7227] Config: added 'psk' value '<hidden>'
Oct 11 09:25:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/138
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7900] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:25:33 IQ138000 NetworkManager[403]: <info>  [1760174733.7902] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:25:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:25:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:25:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:25:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:25:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:25:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:25:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:25:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:25:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:25:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:25:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:25:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:25:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:25:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:25:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:25:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:25:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:25:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:25:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:25:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:25:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:25:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:25:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:25:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:25:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:25:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:25:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:25:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:25:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:25:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:25:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:25:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:25:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:25:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:25:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:25:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:25:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:25:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:59 IQ138000 NetworkManager[403]: <warn>  [1760174759.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:25:59 IQ138000 NetworkManager[403]: <info>  [1760174759.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:25:59 IQ138000 NetworkManager[403]: <warn>  [1760174759.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:25:59 IQ138000 NetworkManager[403]: <info>  [1760174759.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:25:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/138
Oct 11 09:25:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:25:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:25:59 IQ138000 NetworkManager[403]: <info>  [1760174759.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:25:59 IQ138000 NetworkManager[403]: <info>  [1760174759.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:26:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:26:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:26:05 IQ138000 NetworkManager[403]: <info>  [1760174765.4957] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:26:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:26:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:26:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:26:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:26:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:26:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:26:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:26:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:26:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:26:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:26:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:26:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:26:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:26:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:26:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:26:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:26:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:26:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:26:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:26:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:26:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:26:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:26:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:26:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:26:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:26:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:26:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:26:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:26:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:26:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:26:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:26:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:26:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:26:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:26:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:26:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:26:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:13 IQ138000 wb-watchdog[1209]: [INFO] Interval #190 started. Waiting up to 60 seconds for error...
Oct 11 09:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:26:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:26:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:26:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:26:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:26:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:26:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:26:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:26:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:26:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:26:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:26:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:26:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:26:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:26:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:26:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:26:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:26:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:26:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:26:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:26:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:26:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:26:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:26:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:26:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:26:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:26:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:26:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:26:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:26:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:26:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:26:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:26:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:26:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:26:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:26:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:26:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:26:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:26:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.3818] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.3823] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.3828] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.3885] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.3906] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.3908] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4019] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4057] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4076] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4079] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4081] Config: added 'scan_ssid' value '1'
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4082] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4083] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.4084] Config: added 'psk' value '<hidden>'
Oct 11 09:27:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/139
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.5192] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:27:00 IQ138000 NetworkManager[403]: <info>  [1760174820.5194] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:27:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:27:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:27:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:27:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:27:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:27:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:27:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:27:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:27:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:27:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:27:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:27:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:27:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:27:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:27:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:27:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:27:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:27:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:27:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:27:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:27:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:27:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:27:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:27:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:27:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:27:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:27:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:27:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:27:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:27:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:27:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:27:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:27:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:27:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:27:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:27:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:27:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:27:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:27:13 IQ138000 wb-watchdog[1816]: [INFO] Interval #191 started. Waiting up to 60 seconds for error...
Oct 11 09:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:27:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:27:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:26 IQ138000 NetworkManager[403]: <warn>  [1760174846.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:27:26 IQ138000 NetworkManager[403]: <info>  [1760174846.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:27:26 IQ138000 NetworkManager[403]: <warn>  [1760174846.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:27:26 IQ138000 NetworkManager[403]: <info>  [1760174846.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:27:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:27:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/139
Oct 11 09:27:26 IQ138000 NetworkManager[403]: <info>  [1760174846.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:27:26 IQ138000 NetworkManager[403]: <info>  [1760174846.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:27:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:27:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:27:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:27:32 IQ138000 NetworkManager[403]: <info>  [1760174852.1501] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:27:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:27:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:27:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L1, row count 7183, limit 7042
Oct 11 09:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:27:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:27:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:27:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:27:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:27:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:27:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:27:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:27:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:27:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:27:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:27:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:27:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:27:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:27:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:27:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:27:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:27:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:27:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:27:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:27:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:27:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:27:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:27:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:27:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:27:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:27:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:27:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:27:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:27:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:27:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:27:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:27:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:27:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:27:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:27:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:27:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:43 IQ138000 npm[3801]: [2025-10-11 09:27:43] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.51,"last_seen":1760174863123,"linkquality":94,"power_outage_count":48745,"temperature":26.99,"voltage":3025}'
Oct 11 09:27:43 IQ138000 npm[3801]: [2025-10-11 09:27:43] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.16,"last_seen":1760174863137,"linkquality":94,"power_outage_count":48745,"temperature":26.99,"voltage":3025}'
Oct 11 09:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:27:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:27:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:28:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:28:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:28:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:28:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:28:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:28:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:28:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:28:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:28:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:28:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:28:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:28:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:28:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:28:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:28:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:28:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:28:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:28:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:28:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:28:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:28:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:28:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:28:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:28:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:28:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:28:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:28:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:28:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:28:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:28:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:28:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:28:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:28:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:28:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:28:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:28:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:28:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:28:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-watchdog[2580]: [INFO] Interval #192 started. Waiting up to 60 seconds for error...
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8732 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:28:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2759] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2763] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2771] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2828] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2846] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2847] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2958] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.2988] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.3029] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.3034] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.3035] Config: added 'scan_ssid' value '1'
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.3036] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.3038] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:28:27 IQ138000 NetworkManager[403]: <info>  [1760174907.3039] Config: added 'psk' value '<hidden>'
Oct 11 09:28:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/140
Oct 11 09:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:28:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:28:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:31 IQ138000 NetworkManager[403]: <info>  [1760174911.3994] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:28:31 IQ138000 NetworkManager[403]: <info>  [1760174911.3997] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:28:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:28:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:28:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:28:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:28:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:28:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:28:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:28:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:28:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:28:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:28:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:28:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:28:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:28:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:28:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:28:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:28:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:28:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:28:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:28:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:28:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:28:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:28:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:28:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:28:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:28:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:28:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:28:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:28:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:28:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:28:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:28:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:28:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:28:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:28:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:28:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:28:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:53 IQ138000 NetworkManager[403]: <warn>  [1760174933.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:28:53 IQ138000 NetworkManager[403]: <info>  [1760174933.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:28:53 IQ138000 NetworkManager[403]: <warn>  [1760174933.0308] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:28:53 IQ138000 NetworkManager[403]: <info>  [1760174933.0334] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:28:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/140
Oct 11 09:28:53 IQ138000 NetworkManager[403]: <info>  [1760174933.0742] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:28:53 IQ138000 NetworkManager[403]: <info>  [1760174933.0744] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:28:59 IQ138000 NetworkManager[403]: <info>  [1760174939.0252] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:29:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:29:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:29:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:29:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:29:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:29:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:29:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:29:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:29:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:29:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:29:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:29:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:29:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:29:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:29:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:29:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:29:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:29:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:29:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:29:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:29:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:29:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:29:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:29:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:29:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:29:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:29:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:29:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:29:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:29:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:29:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:29:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:29:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:29:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:29:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:29:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:29:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:29:13 IQ138000 wb-watchdog[3214]: [INFO] Interval #193 started. Waiting up to 60 seconds for error...
Oct 11 09:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:29:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:29:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L1, row count 7183, limit 7042
Oct 11 09:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:29:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:29:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:29:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:29:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:29:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:29:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:29:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:29:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:29:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:29:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:29:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:29:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:29:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:29:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:29:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:29:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:29:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:29:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:29:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:29:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:29:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:29:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:29:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:29:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:29:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:29:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:29:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:29:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:29:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:29:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:29:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:29:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:29:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:29:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:29:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:29:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:29:53 IQ138000 npm[3801]: [2025-10-11 09:29:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.16,"last_seen":1760174993839,"linkquality":94,"power_outage_count":48745,"temperature":26.84,"voltage":3025}'
Oct 11 09:29:53 IQ138000 npm[3801]: [2025-10-11 09:29:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.32,"last_seen":1760174993855,"linkquality":94,"power_outage_count":48745,"temperature":26.84,"voltage":3025}'
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2692] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2697] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2703] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2773] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2795] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2797] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2914] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2936] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2955] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2958] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2960] Config: added 'scan_ssid' value '1'
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2960] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2962] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.2963] Config: added 'psk' value '<hidden>'
Oct 11 09:29:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/141
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.3676] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:29:54 IQ138000 NetworkManager[403]: <info>  [1760174994.3685] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:30:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:30:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:30:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:30:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:30:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:30:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:30:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:30:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:30:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:30:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:30:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:30:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:30:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:30:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:30:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:30:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:30:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:30:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:30:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:30:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:30:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:30:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:30:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:30:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:30:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:30:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:30:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:30:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:30:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:30:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:30:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:30:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:30:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:30:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:30:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:30:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:30:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-watchdog[3946]: [INFO] Interval #194 started. Waiting up to 60 seconds for error...
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:30:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:30:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:20 IQ138000 NetworkManager[403]: <warn>  [1760175020.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:30:20 IQ138000 NetworkManager[403]: <info>  [1760175020.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:30:20 IQ138000 NetworkManager[403]: <warn>  [1760175020.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:30:20 IQ138000 NetworkManager[403]: <info>  [1760175020.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:30:20 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:30:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/141
Oct 11 09:30:20 IQ138000 NetworkManager[403]: <info>  [1760175020.0638] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:30:20 IQ138000 NetworkManager[403]: <info>  [1760175020.0640] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:30:20 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:30:26 IQ138000 NetworkManager[403]: <info>  [1760175026.0018] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:30:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:30:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:30:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:30:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:30:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:30:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:30:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:30:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:30:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:30:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:30:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:30:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:30:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:30:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:30:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:30:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:30:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:30:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:30:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:30:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:30:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:30:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:30:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:30:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:30:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:30:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:30:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:30:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:30:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:30:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:30:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:30:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:30:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:30:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:30:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:30:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:30:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:30:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:30:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:30:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:30:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:30:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:30:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:31:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:31:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:31:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:31:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:31:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:31:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:31:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:31:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:31:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:31:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:31:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:31:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:31:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:31:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:31:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:31:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:31:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:31:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:31:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:31:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:31:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:31:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:31:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:31:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:31:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:31:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:31:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:31:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:31:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:31:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:31:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:31:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:31:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:31:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:31:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:31:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:31:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:31:13 IQ138000 wb-watchdog[4583]: [INFO] Interval #195 started. Waiting up to 60 seconds for error...
Oct 11 09:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:31:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:31:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:31:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9736] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9741] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9747] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9801] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9821] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9823] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9925] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9946] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9965] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9969] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9970] Config: added 'scan_ssid' value '1'
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9971] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9972] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:31:20 IQ138000 NetworkManager[403]: <info>  [1760175080.9973] Config: added 'psk' value '<hidden>'
Oct 11 09:31:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/142
Oct 11 09:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:31:24 IQ138000 NetworkManager[403]: <info>  [1760175084.0803] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:31:24 IQ138000 NetworkManager[403]: <info>  [1760175084.0806] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:31:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:31:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8748 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:31:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:31:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:31:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:31:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:31:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:31:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:31:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:31:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:31:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:31:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:31:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:31:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:31:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:31:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:31:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:31:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:31:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:31:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:31:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:31:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:31:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:31:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:31:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:31:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:31:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:31:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:31:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:31:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:31:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:31:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:31:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:31:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:31:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:31:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:31:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:46 IQ138000 NetworkManager[403]: <warn>  [1760175106.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:31:46 IQ138000 NetworkManager[403]: <info>  [1760175106.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:31:46 IQ138000 NetworkManager[403]: <warn>  [1760175106.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:31:46 IQ138000 NetworkManager[403]: <info>  [1760175106.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:31:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/142
Oct 11 09:31:46 IQ138000 NetworkManager[403]: <info>  [1760175106.0710] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:31:46 IQ138000 NetworkManager[403]: <info>  [1760175106.0712] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:51 IQ138000 NetworkManager[403]: <info>  [1760175111.6948] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:31:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:32:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:32:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:32:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:32:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:32:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:32:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:32:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:32:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:32:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:32:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:32:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:32:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:32:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:32:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:32:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:32:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:32:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:32:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:32:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:32:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:32:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:32:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:32:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:32:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:32:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:32:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:32:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:32:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:32:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:32:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:32:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:32:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:32:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:32:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:32:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:32:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:32:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:32:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:32:13 IQ138000 wb-watchdog[5296]: [INFO] Interval #196 started. Waiting up to 60 seconds for error...
Oct 11 09:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:32:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:32:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:32:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:32:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:32:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:32:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:32:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:32:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:32:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:32:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:32:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:32:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:32:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:32:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:32:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:32:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:32:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:32:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:32:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:32:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:32:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:32:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:32:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:32:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:32:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:32:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:32:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:32:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:32:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:32:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:32:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:32:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:32:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:32:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:32:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:32:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:32:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:32:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6374] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6379] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6385] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6439] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6458] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6460] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6548] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6570] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6590] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6593] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6594] Config: added 'scan_ssid' value '1'
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6595] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6596] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.6597] Config: added 'psk' value '<hidden>'
Oct 11 09:32:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/143
Oct 11 09:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.7276] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:32:46 IQ138000 NetworkManager[403]: <info>  [1760175166.7278] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:33:12 IQ138000 NetworkManager[403]: <warn>  [1760175192.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:33:12 IQ138000 NetworkManager[403]: <info>  [1760175192.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:33:12 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:33:12 IQ138000 NetworkManager[403]: <warn>  [1760175192.0271] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:33:12 IQ138000 NetworkManager[403]: <info>  [1760175192.0673] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:33:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/143
Oct 11 09:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:33:12 IQ138000 NetworkManager[403]: <info>  [1760175192.2205] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:33:12 IQ138000 NetworkManager[403]: <info>  [1760175192.2207] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:33:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:33:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:33:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:33:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:33:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:33:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:33:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:33:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:33:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:33:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:33:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:33:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:33:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:33:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:33:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:33:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:33:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:33:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:33:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:33:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:33:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:33:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:33:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:33:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:33:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:33:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:33:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:33:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:33:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:33:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:33:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:33:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:33:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:33:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:33:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:33:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:33:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:33:12 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:33:13 IQ138000 wb-watchdog[5909]: [INFO] Interval #197 started. Waiting up to 60 seconds for error...
Oct 11 09:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:33:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:33:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:33:18 IQ138000 NetworkManager[403]: <info>  [1760175198.3703] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:33:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:33:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:33:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:33:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:33:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:33:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:33:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:33:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:33:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:33:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:33:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:33:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:33:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:33:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:33:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:33:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:33:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:33:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:33:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:33:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:33:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:33:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:33:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:33:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:33:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:33:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:33:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:33:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:33:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:33:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:33:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:33:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:33:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:33:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:33:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:33:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:33:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:33:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:33:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:33:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:33:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:33:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8724 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:34:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:34:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:34:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:34:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:34:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:34:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:34:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:34:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:34:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:34:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:34:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:34:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:34:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:34:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:34:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:34:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:34:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:34:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:34:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:34:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:34:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:34:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:34:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:34:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:34:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:34:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:34:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:34:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:34:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:34:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:34:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:34:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:34:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:34:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:34:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:34:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:34:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3543] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3557] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3596] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3656] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3673] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3674] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3822] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3867] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3895] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3899] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3900] Config: added 'scan_ssid' value '1'
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3901] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3902] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:34:13 IQ138000 NetworkManager[403]: <info>  [1760175253.3903] Config: added 'psk' value '<hidden>'
Oct 11 09:34:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/144
Oct 11 09:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:13 IQ138000 wb-watchdog[6633]: [INFO] Interval #198 started. Waiting up to 60 seconds for error...
Oct 11 09:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:15 IQ138000 npm[3801]: [2025-10-11 09:34:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.32,"last_seen":1760175255011,"linkquality":91,"power_outage_count":48745,"temperature":26.68,"voltage":3025}'
Oct 11 09:34:15 IQ138000 npm[3801]: [2025-10-11 09:34:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.21,"last_seen":1760175255033,"linkquality":87,"power_outage_count":48745,"temperature":26.68,"voltage":3025}'
Oct 11 09:34:15 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760175435083,"cmd_timestamp_ms":1760175255083,"source":"regulation"}
Oct 11 09:34:15 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760175435083,"cmd_timestamp_ms":1760175255083,"source":"regulation"}
Oct 11 09:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:34:16 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 09:34:16 IQ138000 NetworkManager[403]: <info>  [1760175256.5121] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:34:16 IQ138000 NetworkManager[403]: <info>  [1760175256.5149] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:34:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:34:21 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 09:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:34:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:34:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:34:39 IQ138000 NetworkManager[403]: <warn>  [1760175279.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:34:39 IQ138000 NetworkManager[403]: <info>  [1760175279.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:34:39 IQ138000 NetworkManager[403]: <warn>  [1760175279.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:34:39 IQ138000 NetworkManager[403]: <info>  [1760175279.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:34:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/144
Oct 11 09:34:39 IQ138000 NetworkManager[403]: <info>  [1760175279.0635] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:34:39 IQ138000 NetworkManager[403]: <info>  [1760175279.0637] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:34:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:34:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:34:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:34:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:34:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:34:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:34:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:34:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:34:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:34:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:34:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:34:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:34:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:34:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:34:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:34:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:34:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:34:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:34:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:34:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:34:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:34:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:34:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:34:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:34:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:34:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:34:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:34:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:34:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:34:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:34:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:34:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:34:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:34:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:34:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:34:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:45 IQ138000 NetworkManager[403]: <info>  [1760175285.1083] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:35:01 IQ138000 CRON[7071]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:35:01 IQ138000 CRON[7075]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 09:35:01 IQ138000 CRON[7071]: pam_unix(cron:session): session closed for user root
Oct 11 09:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:35:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:35:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:35:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:35:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:35:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:35:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:35:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:35:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:35:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:35:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:35:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:35:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:35:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:35:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:35:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:35:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:35:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:35:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:35:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:35:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:35:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:35:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:35:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:35:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:35:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:35:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:35:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:35:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:35:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:35:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:35:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:35:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:35:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:35:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:35:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:35:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:13 IQ138000 wb-watchdog[7263]: [INFO] Interval #199 started. Waiting up to 60 seconds for error...
Oct 11 09:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:35:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:35:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L2, row count 7183, limit 7042
Oct 11 09:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2318] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2323] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2329] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2417] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2468] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2486] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2589] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2614] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2635] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2643] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2645] Config: added 'scan_ssid' value '1'
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2646] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2649] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.2666] Config: added 'psk' value '<hidden>'
Oct 11 09:35:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/145
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.3403] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:35:40 IQ138000 NetworkManager[403]: <info>  [1760175340.3405] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:35:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:35:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:35:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:35:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:35:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:35:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:35:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:35:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:35:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:35:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:35:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:35:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:35:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:35:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:35:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:35:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:35:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:35:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:35:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:35:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:35:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:35:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:35:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:35:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:35:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:35:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:35:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:35:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:35:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:35:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:35:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:35:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:35:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:35:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:35:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:35:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:36:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:05 IQ138000 NetworkManager[403]: <warn>  [1760175365.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:36:05 IQ138000 NetworkManager[403]: <info>  [1760175365.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:36:05 IQ138000 NetworkManager[403]: <warn>  [1760175365.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:36:05 IQ138000 NetworkManager[403]: <info>  [1760175365.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/145
Oct 11 09:36:05 IQ138000 NetworkManager[403]: <info>  [1760175365.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:36:05 IQ138000 NetworkManager[403]: <info>  [1760175365.0702] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:36:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:36:10 IQ138000 NetworkManager[403]: <info>  [1760175370.9543] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-watchdog[7969]: [INFO] Interval #200 started. Waiting up to 60 seconds for error...
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:36:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:36:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:36:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:36:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:36:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:36:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:36:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:36:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:36:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:36:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:36:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:36:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:36:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:36:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:36:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:36:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:36:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:36:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:36:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:36:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:36:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:36:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:36:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:36:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:36:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:36:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:36:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:36:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:36:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:36:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:36:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:36:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:36:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:36:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:36:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:36:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:36:15 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0004450311/last_seen, row count 7183, limit 7042
Oct 11 09:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:36:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:40 IQ138000 npm[3801]: [2025-10-11 09:36:40] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.21,"last_seen":1760175400776,"linkquality":83,"power_outage_count":48745,"temperature":26.59,"voltage":3025}'
Oct 11 09:36:40 IQ138000 npm[3801]: [2025-10-11 09:36:40] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.43,"last_seen":1760175400786,"linkquality":83,"power_outage_count":48745,"temperature":26.59,"voltage":3025}'
Oct 11 09:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:36:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:36:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:36:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:36:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:36:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:36:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:36:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:36:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:36:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:36:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:36:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:36:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:36:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:36:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:36:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:36:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:36:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:36:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:36:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:36:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:36:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:36:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:36:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:36:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:36:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:36:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:36:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:36:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:36:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:36:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:36:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:36:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:36:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:36:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:36:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:36:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:36:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:36:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:36:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L3, row count 7183, limit 7042
Oct 11 09:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.8870] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.8875] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.8895] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.8966] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.8993] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9007] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9093] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9128] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9145] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9148] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9149] Config: added 'scan_ssid' value '1'
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9149] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9150] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9151] Config: added 'psk' value '<hidden>'
Oct 11 09:37:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/146
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9855] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:37:05 IQ138000 NetworkManager[403]: <info>  [1760175425.9857] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:37:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:37:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-watchdog[8558]: [INFO] Interval #201 started. Waiting up to 60 seconds for error...
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:37:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:37:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:37:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:37:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:37:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:37:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:37:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:37:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:37:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:37:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:37:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:37:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:37:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:37:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:37:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:37:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:37:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:37:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:37:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:37:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:37:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:37:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:37:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:37:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:37:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:37:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:37:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:37:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:37:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:37:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:37:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:37:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:37:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:37:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:37:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:37:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:37:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:37:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:37:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:37:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:31 IQ138000 NetworkManager[403]: <warn>  [1760175451.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:37:31 IQ138000 NetworkManager[403]: <info>  [1760175451.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:37:31 IQ138000 NetworkManager[403]: <warn>  [1760175451.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:37:31 IQ138000 NetworkManager[403]: <info>  [1760175451.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:37:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/146
Oct 11 09:37:31 IQ138000 NetworkManager[403]: <info>  [1760175451.0759] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:37:31 IQ138000 NetworkManager[403]: <info>  [1760175451.0761] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:37:36 IQ138000 NetworkManager[403]: <info>  [1760175456.6412] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:37:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:37:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:37:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:37:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:37:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:37:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:37:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:37:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:37:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:37:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:37:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:37:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:37:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:37:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:37:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:37:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:37:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:37:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:37:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:37:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:37:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:37:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:37:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:37:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:37:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:37:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:37:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:37:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:37:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:37:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:37:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:37:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:37:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:37:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:37:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:37:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:37:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:37:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:01 IQ138000 CRON[9107]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:38:01 IQ138000 CRON[9112]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 09:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:38:07 IQ138000 sSMTP[9131]: Unable to locate mail
Oct 11 09:38:07 IQ138000 sSMTP[9131]: Cannot open mail:25
Oct 11 09:38:07 IQ138000 cron[9131]: sendmail: Cannot open mail:25
Oct 11 09:38:07 IQ138000 CRON[9107]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 09:38:07 IQ138000 CRON[9107]: pam_unix(cron:session): session closed for user root
Oct 11 09:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:38:13 IQ138000 wb-watchdog[9290]: [INFO] Interval #202 started. Waiting up to 60 seconds for error...
Oct 11 09:38:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:38:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:38:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:38:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:38:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:38:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:38:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:38:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:38:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:38:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:38:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:38:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:38:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:38:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:38:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:38:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:38:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:38:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:38:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:38:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:38:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:38:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:38:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:38:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:38:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:38:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:38:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:38:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:38:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:38:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:38:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:38:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:38:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:38:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:38:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:38:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:38:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:38:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7269] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7273] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7279] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7369] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7402] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7411] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7504] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7533] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7556] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7560] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7562] Config: added 'scan_ssid' value '1'
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7563] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7565] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.7566] Config: added 'psk' value '<hidden>'
Oct 11 09:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/147
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.8332] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:38:31 IQ138000 NetworkManager[403]: <info>  [1760175511.8334] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 18177 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:38:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:38:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:38:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:38:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:38:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:38:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:38:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:38:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:38:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:38:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:38:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:38:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:38:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:38:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:38:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:38:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:38:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:38:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:38:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:38:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:38:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:38:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:38:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:38:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:38:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:38:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:38:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:38:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:38:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:38:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:38:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:38:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:38:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:38:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:38:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:38:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:38:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:38:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:57 IQ138000 NetworkManager[403]: <warn>  [1760175537.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:38:57 IQ138000 NetworkManager[403]: <info>  [1760175537.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:38:57 IQ138000 NetworkManager[403]: <warn>  [1760175537.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:38:57 IQ138000 NetworkManager[403]: <info>  [1760175537.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:38:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/147
Oct 11 09:38:57 IQ138000 NetworkManager[403]: <info>  [1760175537.0645] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:38:57 IQ138000 NetworkManager[403]: <info>  [1760175537.0647] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:39:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:39:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:39:03 IQ138000 NetworkManager[403]: <info>  [1760175543.4751] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 09:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:13 IQ138000 wb-watchdog[9896]: [INFO] Interval #203 started. Waiting up to 60 seconds for error...
Oct 11 09:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:39:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:39:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:39:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:39:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:39:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:39:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:39:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:39:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:39:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:39:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:39:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:39:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:39:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:39:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:39:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:39:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:39:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:39:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:39:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:39:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:39:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:39:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:39:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:39:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:39:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:39:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:39:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:39:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:39:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:39:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:39:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:39:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:39:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:39:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:39:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:39:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:39:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:39:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:39:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:39:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:39:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:39:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:39:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:39:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:39:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:39:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:39:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:39:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:39:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:39:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:39:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:39:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:39:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:39:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:39:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:39:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:39:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:39:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:39:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:39:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:39:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:39:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:39:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:39:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:39:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:39:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:39:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:39:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:39:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:39:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:39:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:39:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:39:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:39:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:39:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:39:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4057] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4093] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4101] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4265] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4325] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4343] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4569] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4617] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:39:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/148
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4658] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4663] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4665] Config: added 'scan_ssid' value '1'
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4666] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4667] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.4704] Config: added 'psk' value '<hidden>'
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.5391] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:39:58 IQ138000 NetworkManager[403]: <info>  [1760175598.5394] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 09:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:40:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:40:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:13 IQ138000 wb-watchdog[10596]: [INFO] Interval #204 started. Waiting up to 60 seconds for error...
Oct 11 09:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:40:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:40:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:40:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:40:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:40:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:40:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:40:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:40:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:40:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:40:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:40:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:40:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:40:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:40:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:40:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:40:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:40:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:40:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:40:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:40:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:40:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:40:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:40:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:40:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:40:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:40:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:40:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:40:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:40:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:40:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:40:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:40:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:40:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:40:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:40:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:40:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:24 IQ138000 NetworkManager[403]: <warn>  [1760175624.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:40:24 IQ138000 NetworkManager[403]: <info>  [1760175624.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:40:24 IQ138000 NetworkManager[403]: <warn>  [1760175624.0266] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:40:24 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:40:24 IQ138000 NetworkManager[403]: <info>  [1760175624.0349] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:40:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/148
Oct 11 09:40:24 IQ138000 NetworkManager[403]: <info>  [1760175624.0736] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:40:24 IQ138000 NetworkManager[403]: <info>  [1760175624.0738] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:40:24 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:40:30 IQ138000 NetworkManager[403]: <info>  [1760175630.1547] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:40:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:40:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:40:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:40:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:40:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:40:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:40:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:40:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:40:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:40:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:40:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:40:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:40:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:40:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:40:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:40:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:40:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:40:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:40:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:40:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:40:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:40:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:40:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:40:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:40:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:40:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:40:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:40:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:40:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:40:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:40:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:40:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:40:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:40:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:40:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:40:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:40:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:40:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:40:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:40:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:41:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:06 IQ138000 npm[3801]: [2025-10-11 09:41:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":49.34,"last_seen":1760175666499,"linkquality":69,"power_outage_count":25795,"pressure":993,"temperature":21.75,"voltage":3005}'
Oct 11 09:41:06 IQ138000 npm[3801]: [2025-10-11 09:41:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":49.38,"last_seen":1760175666520,"linkquality":69,"power_outage_count":25795,"pressure":993,"temperature":21.75,"voltage":3005}'
Oct 11 09:41:06 IQ138000 npm[3801]: [2025-10-11 09:41:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":49.38,"last_seen":1760175666520,"linkquality":69,"power_outage_count":25795,"pressure":992.7,"temperature":21.75,"voltage":3005}'
Oct 11 09:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 09:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:13 IQ138000 wb-watchdog[11216]: [INFO] Interval #205 started. Waiting up to 60 seconds for error...
Oct 11 09:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:41:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:41:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:41:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:41:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:41:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:41:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:41:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:41:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:41:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:41:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:41:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:41:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:41:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:41:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:41:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:41:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:41:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:41:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:41:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:41:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:41:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:41:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:41:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:41:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:41:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:41:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:41:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:41:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:41:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:41:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:41:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:41:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:41:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:41:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:41:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:41:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2754] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2771] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2777] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2830] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2847] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2849] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.2972] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3004] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3023] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3027] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3029] Config: added 'scan_ssid' value '1'
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3029] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3031] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:41:25 IQ138000 NetworkManager[403]: <info>  [1760175685.3032] Config: added 'psk' value '<hidden>'
Oct 11 09:41:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/149
Oct 11 09:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:41:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:29 IQ138000 NetworkManager[403]: <info>  [1760175689.3796] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:41:29 IQ138000 NetworkManager[403]: <info>  [1760175689.3799] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:41:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:41:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:41:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:41:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:41:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:41:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:41:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:41:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:41:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:41:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:41:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:41:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:41:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:41:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:41:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:41:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:41:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:41:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:41:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:41:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:41:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:41:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:41:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:41:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:41:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:41:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:41:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:41:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:41:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:41:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:41:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:41:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:41:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:41:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:41:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:41:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:41:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:51 IQ138000 NetworkManager[403]: <warn>  [1760175711.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:41:51 IQ138000 NetworkManager[403]: <info>  [1760175711.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:41:51 IQ138000 NetworkManager[403]: <warn>  [1760175711.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:41:51 IQ138000 NetworkManager[403]: <info>  [1760175711.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:41:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/149
Oct 11 09:41:51 IQ138000 NetworkManager[403]: <info>  [1760175711.0714] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:41:51 IQ138000 NetworkManager[403]: <info>  [1760175711.0716] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:57 IQ138000 NetworkManager[403]: <info>  [1760175717.0154] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:41:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:41:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:13 IQ138000 wb-watchdog[11914]: [INFO] Interval #206 started. Waiting up to 60 seconds for error...
Oct 11 09:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:42:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:42:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:42:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:42:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:42:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:42:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:42:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:42:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:42:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:42:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:42:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:42:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:42:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:42:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:42:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:42:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:42:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:42:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:42:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:42:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:42:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:42:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:42:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:42:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:42:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:42:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:42:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:42:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:42:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:42:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:42:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:42:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:42:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:42:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:42:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:42:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:42:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:42:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:42:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:42:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:42:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:42:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:42:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:42:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:42:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:42:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:42:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:42:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:42:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:42:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:42:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:42:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:42:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:42:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:42:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:42:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:42:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:42:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:42:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:42:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:42:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:42:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:42:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:42:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:42:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:42:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:42:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:42:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:42:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:42:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:42:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:42:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:42:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:42:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:42:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1002] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1007] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1012] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1069] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1091] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1093] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1216] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1242] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1260] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1265] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1266] Config: added 'scan_ssid' value '1'
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1268] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1272] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1273] Config: added 'psk' value '<hidden>'
Oct 11 09:42:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/150
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1990] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:42:52 IQ138000 NetworkManager[403]: <info>  [1760175772.1992] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:43:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:43:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:13 IQ138000 wb-watchdog[12526]: [INFO] Interval #207 started. Waiting up to 60 seconds for error...
Oct 11 09:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:43:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:43:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:43:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:43:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:43:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:43:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:43:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:43:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:43:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:43:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:43:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:43:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:43:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:43:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:43:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:43:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:43:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:43:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:43:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:43:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:43:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:43:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:43:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:43:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:43:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:43:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:43:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:43:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:43:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:43:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:43:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:43:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:43:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:43:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:43:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:43:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:43:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:43:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:43:17 IQ138000 NetworkManager[403]: <warn>  [1760175797.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:43:17 IQ138000 NetworkManager[403]: <info>  [1760175797.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:43:17 IQ138000 NetworkManager[403]: <warn>  [1760175797.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:43:17 IQ138000 NetworkManager[403]: <info>  [1760175797.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:43:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/150
Oct 11 09:43:17 IQ138000 NetworkManager[403]: <info>  [1760175797.0704] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:43:17 IQ138000 NetworkManager[403]: <info>  [1760175797.0706] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:43:22 IQ138000 npm[3801]: [2025-10-11 09:43:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.83,"last_seen":1760175802479,"linkquality":102,"power_outage_count":48745,"temperature":27.01,"voltage":3025}'
Oct 11 09:43:22 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760175982516,"cmd_timestamp_ms":1760175802516,"source":"regulation"}
Oct 11 09:43:22 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760175982516,"cmd_timestamp_ms":1760175802516,"source":"regulation"}
Oct 11 09:43:22 IQ138000 NetworkManager[403]: <info>  [1760175802.8133] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 09:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:23 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 09:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:28 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 09:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:38 IQ138000 npm[3801]: [2025-10-11 09:43:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.83,"last_seen":1760175818350,"linkquality":91,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 09:43:38 IQ138000 npm[3801]: [2025-10-11 09:43:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.65,"last_seen":1760175818360,"linkquality":87,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 09:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:43:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:43:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:43:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:43:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:43:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:43:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:43:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:43:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:43:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:43:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:43:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:43:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:43:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:43:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:43:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:43:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:43:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:43:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:43:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:43:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:43:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:43:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:43:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:43:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:43:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:43:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:43:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:43:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:43:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:43:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:43:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:43:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:43:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:43:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:43:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:43:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:43:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:43:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:43:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:44:08 IQ138000 npm[3801]: [2025-10-11 09:44:08] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.92,"last_seen":1760175848719,"linkquality":54,"power_outage_count":25795,"pressure":992.9,"temperature":21.76,"voltage":3005}'
Oct 11 09:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:44:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:13 IQ138000 wb-watchdog[13230]: [INFO] Interval #208 started. Waiting up to 60 seconds for error...
Oct 11 09:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:44:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:44:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:44:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:44:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:44:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:44:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:44:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:44:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:44:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:44:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:44:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:44:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:44:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:44:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:44:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:44:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:44:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:44:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:44:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:44:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:44:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:44:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:44:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:44:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:44:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:44:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:44:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:44:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:44:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:44:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:44:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:44:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:44:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:44:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:44:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8322] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8329] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8340] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8421] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8457] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8472] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8572] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8609] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8640] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8644] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8645] Config: added 'scan_ssid' value '1'
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8646] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8647] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.8648] Config: added 'psk' value '<hidden>'
Oct 11 09:44:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/151
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.9377] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:44:17 IQ138000 NetworkManager[403]: <info>  [1760175857.9380] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:44:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:44:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:43 IQ138000 NetworkManager[403]: <warn>  [1760175883.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:44:43 IQ138000 NetworkManager[403]: <info>  [1760175883.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:44:43 IQ138000 NetworkManager[403]: <warn>  [1760175883.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:44:43 IQ138000 NetworkManager[403]: <info>  [1760175883.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:44:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/151
Oct 11 09:44:43 IQ138000 NetworkManager[403]: <info>  [1760175883.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:44:43 IQ138000 NetworkManager[403]: <info>  [1760175883.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:44:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:44:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:44:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:44:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:44:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:44:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:44:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:44:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:44:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:44:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:44:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:44:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:44:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:44:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:44:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:44:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:44:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:44:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:44:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:44:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:44:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:44:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:44:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:44:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:44:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:44:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:44:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:44:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:44:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:44:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:44:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:44:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:44:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:44:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:44:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:44:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:44:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:49 IQ138000 NetworkManager[403]: <info>  [1760175889.5590] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:44:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:44:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:02 IQ138000 CRON[13679]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:45:02 IQ138000 CRON[13683]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 09:45:02 IQ138000 CRON[13679]: pam_unix(cron:session): session closed for user root
Oct 11 09:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:10 IQ138000 npm[3801]: [2025-10-11 09:45:10] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.92,"last_seen":1760175910036,"linkquality":40,"power_outage_count":25795,"pressure":992.9,"temperature":21.72,"voltage":3005}'
Oct 11 09:45:10 IQ138000 npm[3801]: [2025-10-11 09:45:10] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.65,"last_seen":1760175910050,"linkquality":40,"power_outage_count":25795,"pressure":992.9,"temperature":21.72,"voltage":3005}'
Oct 11 09:45:10 IQ138000 npm[3801]: [2025-10-11 09:45:10] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.65,"last_seen":1760175910050,"linkquality":40,"power_outage_count":25795,"pressure":993,"temperature":21.72,"voltage":3005}'
Oct 11 09:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-watchdog[13850]: [INFO] Interval #209 started. Waiting up to 60 seconds for error...
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:45:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:45:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:45:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:45:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:45:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:45:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:45:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:45:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:45:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:45:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:45:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:45:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:45:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:45:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:45:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:45:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:45:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:45:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:45:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:45:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:45:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:45:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:45:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:45:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:45:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:45:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:45:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:45:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:45:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:45:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:45:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:45:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:45:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:45:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:45:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:45:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:45:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:45:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:45:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16912 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6370] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6384] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6391] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6446] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6463] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6465] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6546] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6566] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6584] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6588] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6589] Config: added 'scan_ssid' value '1'
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6590] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6591] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.6591] Config: added 'psk' value '<hidden>'
Oct 11 09:45:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/152
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.7272] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:45:44 IQ138000 NetworkManager[403]: <info>  [1760175944.7277] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:45:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:45:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:45:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:45:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:45:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:45:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:45:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:45:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:45:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:45:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:45:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:45:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:45:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:45:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:45:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:45:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:45:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:45:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:45:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:45:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:45:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:45:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:45:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:45:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:45:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:45:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:45:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:45:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:45:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:45:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:45:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:45:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:45:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:45:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:45:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:45:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:45:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:45:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:45:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:45:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:45:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:46:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:46:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:10 IQ138000 NetworkManager[403]: <warn>  [1760175970.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:46:10 IQ138000 NetworkManager[403]: <info>  [1760175970.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:46:10 IQ138000 NetworkManager[403]: <warn>  [1760175970.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:46:10 IQ138000 NetworkManager[403]: <info>  [1760175970.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:46:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:46:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/152
Oct 11 09:46:10 IQ138000 NetworkManager[403]: <info>  [1760175970.0631] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:46:10 IQ138000 NetworkManager[403]: <info>  [1760175970.0634] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:46:13 IQ138000 wb-watchdog[14567]: [INFO] Interval #210 started. Waiting up to 60 seconds for error...
Oct 11 09:46:16 IQ138000 NetworkManager[403]: <info>  [1760175976.3628] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:46:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:46:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:46:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:46:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:46:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:46:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:46:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:46:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:46:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:46:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:46:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:46:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:46:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:46:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:46:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:46:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:46:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:46:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:46:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:46:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:46:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:46:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:46:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:46:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:46:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:46:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:46:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:46:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:46:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:46:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:46:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:46:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:46:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:46:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:46:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:46:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:46:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:46:19 IQ138000 npm[3801]: [2025-10-11 09:46:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.65,"last_seen":1760175979164,"linkquality":102,"power_outage_count":48745,"temperature":26.55,"voltage":3025}'
Oct 11 09:46:19 IQ138000 npm[3801]: [2025-10-11 09:46:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.88,"last_seen":1760175979177,"linkquality":98,"power_outage_count":48745,"temperature":26.55,"voltage":3025}'
Oct 11 09:46:19 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760176159250,"cmd_timestamp_ms":1760175979250,"source":"regulation"}
Oct 11 09:46:19 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760176159250,"cmd_timestamp_ms":1760175979250,"source":"regulation"}
Oct 11 09:46:20 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 09:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:46:25 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 09:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:46:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:46:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:46:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:46:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:46:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:46:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:46:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:46:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:46:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:46:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:46:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:46:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:46:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:46:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:46:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:46:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:46:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:46:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:46:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:46:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:46:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:46:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:46:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:46:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:46:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:46:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:46:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:46:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:46:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:46:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:46:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:46:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:46:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:46:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:46:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:46:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:46:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:46:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:46:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10004 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3342] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3352] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3360] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3441] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3467] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3469] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3558] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3578] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3597] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3603] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3604] Config: added 'scan_ssid' value '1'
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3605] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3606] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:47:11 IQ138000 NetworkManager[403]: <info>  [1760176031.3607] Config: added 'psk' value '<hidden>'
Oct 11 09:47:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/153
Oct 11 09:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:13 IQ138000 wb-watchdog[15163]: [INFO] Interval #211 started. Waiting up to 60 seconds for error...
Oct 11 09:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:47:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:47:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:14 IQ138000 NetworkManager[403]: <info>  [1760176034.4421] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:47:14 IQ138000 NetworkManager[403]: <info>  [1760176034.4423] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:47:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:47:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:47:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:47:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:47:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:47:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:47:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:47:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:47:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:47:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:47:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:47:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:47:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:47:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:47:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:47:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:47:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:47:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:47:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:47:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:47:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:47:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:47:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:47:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:47:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:47:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:47:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:47:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:47:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:47:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:47:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:47:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:47:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:47:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:47:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:47:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is disconnected
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 09:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 09:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 09:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 09:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 09:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 09:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:37 IQ138000 NetworkManager[403]: <warn>  [1760176057.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:47:37 IQ138000 NetworkManager[403]: <info>  [1760176057.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:47:37 IQ138000 NetworkManager[403]: <warn>  [1760176057.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:47:37 IQ138000 NetworkManager[403]: <info>  [1760176057.0285] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:47:37 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:47:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/153
Oct 11 09:47:37 IQ138000 NetworkManager[403]: <info>  [1760176057.0676] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:47:37 IQ138000 NetworkManager[403]: <info>  [1760176057.0677] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:43 IQ138000 NetworkManager[403]: <info>  [1760176063.0715] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:47:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:47:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:47:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:47:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:47:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:47:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:47:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:47:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:47:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:47:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:47:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:47:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:47:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:47:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:47:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:47:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:47:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:47:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:47:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:47:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:47:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:47:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:47:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:47:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:47:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:47:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:47:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:47:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:47:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:47:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:47:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:47:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:47:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:47:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:47:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:47:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:48:04 IQ138000 npm[3801]: [2025-10-11 09:48:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.88,"last_seen":1760176084770,"linkquality":98,"power_outage_count":48745,"temperature":26.23,"voltage":3025}'
Oct 11 09:48:04 IQ138000 npm[3801]: [2025-10-11 09:48:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.96,"last_seen":1760176084784,"linkquality":98,"power_outage_count":48745,"temperature":26.23,"voltage":3025}'
Oct 11 09:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:48:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9226 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:48:13 IQ138000 wb-watchdog[15885]: [INFO] Interval #212 started. Waiting up to 60 seconds for error...
Oct 11 09:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:48:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:48:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:48:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:48:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:48:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:48:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:48:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:48:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:48:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:48:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:48:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:48:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:48:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:48:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:48:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:48:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:48:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:48:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:48:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:48:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:48:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:48:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:48:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:48:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:48:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:48:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:48:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:48:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:48:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:48:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:48:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:48:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:48:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:48:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:48:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:48:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:48:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:48:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:48:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:48:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1033] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1038] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1043] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1095] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1114] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1115] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1196] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1223] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1279] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1283] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1285] Config: added 'scan_ssid' value '1'
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1286] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1287] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:48:38 IQ138000 NetworkManager[403]: <info>  [1760176118.1288] Config: added 'psk' value '<hidden>'
Oct 11 09:48:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/154
Oct 11 09:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:41 IQ138000 NetworkManager[403]: <info>  [1760176121.1991] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:48:41 IQ138000 NetworkManager[403]: <info>  [1760176121.1995] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:48:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:48:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:48:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:48:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:48:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:48:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:48:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:48:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:48:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:48:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:48:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:48:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:48:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:48:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:48:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:48:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:48:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:48:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:48:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:48:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:48:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:48:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:48:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:48:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:48:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:48:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:48:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:48:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:48:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:48:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:48:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:48:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:48:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:48:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:48:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:48:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:48:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:49:03 IQ138000 NetworkManager[403]: <warn>  [1760176143.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:49:03 IQ138000 NetworkManager[403]: <info>  [1760176143.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:49:03 IQ138000 NetworkManager[403]: <warn>  [1760176143.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:49:03 IQ138000 NetworkManager[403]: <info>  [1760176143.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:49:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/154
Oct 11 09:49:03 IQ138000 NetworkManager[403]: <info>  [1760176143.0693] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:49:03 IQ138000 NetworkManager[403]: <info>  [1760176143.0695] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:49:08 IQ138000 NetworkManager[403]: <info>  [1760176148.8400] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:49:13 IQ138000 wb-watchdog[16492]: [INFO] Interval #213 started. Waiting up to 60 seconds for error...
Oct 11 09:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 09:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:49:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:49:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:49:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:49:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:49:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:49:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:49:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:49:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:49:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:49:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:49:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:49:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:49:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:49:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:49:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:49:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:49:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:49:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:49:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:49:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:49:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:49:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:49:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:49:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:49:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:49:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:49:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:49:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:49:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:49:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:49:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:49:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:49:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:49:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:49:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:49:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:49:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:49:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:49:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:49:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:49:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:49:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:49:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:49:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:49:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:49:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:49:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:49:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:49:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:49:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:49:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:49:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:49:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:49:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:49:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:49:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:49:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:49:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:49:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:49:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:49:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:49:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:49:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:49:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:49:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:49:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:49:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:49:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:49:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:49:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:49:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:49:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:49:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:49:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:49:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:49:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:49:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6751] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6756] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6763] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6819] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6838] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6839] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.6979] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7005] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7032] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7037] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7038] Config: added 'scan_ssid' value '1'
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7039] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7040] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7041] Config: added 'psk' value '<hidden>'
Oct 11 09:50:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/155
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7830] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:50:03 IQ138000 NetworkManager[403]: <info>  [1760176203.7832] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:50:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:50:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:13 IQ138000 wb-watchdog[17189]: [INFO] Interval #214 started. Waiting up to 60 seconds for error...
Oct 11 09:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:50:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:50:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:50:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:50:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:50:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:50:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:50:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:50:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:50:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:50:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:50:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:50:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:50:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:50:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:50:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:50:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:50:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:50:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:50:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:50:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:50:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:50:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:50:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:50:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:50:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:50:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:50:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:50:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:50:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:50:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:50:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:50:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:50:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:50:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:50:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:50:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:29 IQ138000 NetworkManager[403]: <warn>  [1760176229.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:50:29 IQ138000 NetworkManager[403]: <info>  [1760176229.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:50:29 IQ138000 NetworkManager[403]: <warn>  [1760176229.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:50:29 IQ138000 NetworkManager[403]: <info>  [1760176229.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:50:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/155
Oct 11 09:50:29 IQ138000 NetworkManager[403]: <info>  [1760176229.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:50:29 IQ138000 NetworkManager[403]: <info>  [1760176229.0711] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:35 IQ138000 NetworkManager[403]: <info>  [1760176235.4056] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:50:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:50:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:50:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:50:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:50:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:50:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:50:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:50:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:50:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:50:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:50:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:50:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:50:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:50:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:50:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:50:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:50:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:50:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:50:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:50:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:50:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:50:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:50:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:50:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:50:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:50:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:50:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:50:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:50:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:50:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:50:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:50:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:50:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:50:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:50:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:50:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:04 IQ138000 npm[3801]: [2025-10-11 09:51:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.65,"last_seen":1760176264090,"linkquality":43,"power_outage_count":25795,"pressure":993,"temperature":21.66,"voltage":3005}'
Oct 11 09:51:04 IQ138000 npm[3801]: [2025-10-11 09:51:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.4,"last_seen":1760176264100,"linkquality":43,"power_outage_count":25795,"pressure":993,"temperature":21.66,"voltage":3005}'
Oct 11 09:51:04 IQ138000 npm[3801]: [2025-10-11 09:51:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.4,"last_seen":1760176264125,"linkquality":43,"power_outage_count":25795,"pressure":992.7,"temperature":21.66,"voltage":3005}'
Oct 11 09:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:51:13 IQ138000 wb-watchdog[17810]: [INFO] Interval #215 started. Waiting up to 60 seconds for error...
Oct 11 09:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 09:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:51:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:51:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:51:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:51:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:51:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:51:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:51:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:51:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:51:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:51:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:51:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:51:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:51:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:51:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:51:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:51:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:51:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:51:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:51:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:51:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:51:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:51:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:51:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:51:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:51:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:51:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:51:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:51:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:51:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:51:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:51:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:51:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:51:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:51:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:51:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:51:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:51:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2240] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2252] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2260] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2315] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2334] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2335] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2446] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2465] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2483] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2486] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2487] Config: added 'scan_ssid' value '1'
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2488] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2490] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.2491] Config: added 'psk' value '<hidden>'
Oct 11 09:51:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/156
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.3162] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:51:30 IQ138000 NetworkManager[403]: <info>  [1760176290.3164] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L3, row count 7183, limit 7042
Oct 11 09:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:51:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:51:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 09:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:51:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:51:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:51:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:51:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:51:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:51:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:51:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:51:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:51:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:51:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:51:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:51:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:51:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:51:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:51:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:51:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:51:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:51:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:51:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:51:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:51:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:51:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:51:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:51:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:51:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:51:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:51:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:51:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:51:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:51:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:51:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:51:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:51:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:51:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:51:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:51:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:51:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:51:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:51:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:55 IQ138000 NetworkManager[403]: <warn>  [1760176315.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:51:55 IQ138000 NetworkManager[403]: <info>  [1760176315.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:51:55 IQ138000 NetworkManager[403]: <warn>  [1760176315.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:51:55 IQ138000 NetworkManager[403]: <info>  [1760176315.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:51:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/156
Oct 11 09:51:55 IQ138000 NetworkManager[403]: <info>  [1760176315.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:51:55 IQ138000 NetworkManager[403]: <info>  [1760176315.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:00 IQ138000 NetworkManager[403]: <info>  [1760176320.9577] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 18 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:52:13 IQ138000 wb-watchdog[18505]: [INFO] Interval #216 started. Waiting up to 60 seconds for error...
Oct 11 09:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:52:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:52:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:52:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:52:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:52:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:52:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:52:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:52:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:52:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:52:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:52:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:52:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:52:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:52:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:52:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:52:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:52:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:52:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:52:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:52:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:52:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:52:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:52:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:52:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:52:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:52:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:52:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:52:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:52:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:52:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:52:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:52:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:52:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:52:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:52:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:52:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:52:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:52:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:52:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:52:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:52:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:52:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:52:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:52:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:52:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:52:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:52:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:52:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:52:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:52:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:52:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:52:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:52:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:52:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:52:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:52:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:52:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:52:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:52:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:52:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:52:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:52:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:52:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:52:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:52:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:52:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:52:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:52:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:52:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:52:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:52:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:52:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:52:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:52:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:52:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1449] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1453] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1459] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1510] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1528] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1529] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1613] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1634] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1650] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1653] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1654] Config: added 'scan_ssid' value '1'
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1654] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1656] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.1656] Config: added 'psk' value '<hidden>'
Oct 11 09:52:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/157
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.2305] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:52:56 IQ138000 NetworkManager[403]: <info>  [1760176376.2307] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 09:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:53:13 IQ138000 wb-watchdog[19117]: [INFO] Interval #217 started. Waiting up to 60 seconds for error...
Oct 11 09:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:53:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:53:21 IQ138000 NetworkManager[403]: <warn>  [1760176401.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:53:21 IQ138000 NetworkManager[403]: <info>  [1760176401.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:53:21 IQ138000 NetworkManager[403]: <warn>  [1760176401.0265] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:53:21 IQ138000 NetworkManager[403]: <info>  [1760176401.0314] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:53:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/157
Oct 11 09:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:53:21 IQ138000 NetworkManager[403]: <info>  [1760176401.0836] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:53:21 IQ138000 NetworkManager[403]: <info>  [1760176401.0838] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:53:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:53:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:53:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:53:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:53:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:53:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:53:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:53:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:53:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:53:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:53:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:53:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:53:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:53:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:53:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:53:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:53:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:53:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:53:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:53:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:53:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:53:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:53:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:53:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:53:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:53:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:53:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:53:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:53:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:53:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:53:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:53:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:53:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:53:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:53:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:53:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:26 IQ138000 NetworkManager[403]: <info>  [1760176406.8557] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:53:27 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:53:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:53:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:53:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:53:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:53:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:53:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:53:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:53:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:53:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:53:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:53:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:53:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:53:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:53:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:53:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:53:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:53:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:53:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:53:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:53:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:53:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:53:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:53:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:53:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:53:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:53:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:53:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:53:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:53:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:53:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:53:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:53:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:53:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:53:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:53:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:53:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:53:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:53:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:53:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:54:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:54:13 IQ138000 wb-watchdog[19829]: [INFO] Interval #218 started. Waiting up to 60 seconds for error...
Oct 11 09:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:54:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:54:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:54:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:54:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:54:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:54:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:54:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:54:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:54:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:54:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:54:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:54:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:54:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:54:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:54:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:54:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:54:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:54:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:54:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:54:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:54:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:54:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:54:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:54:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:54:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:54:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:54:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:54:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:54:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:54:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:54:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:54:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:54:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:54:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:54:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:54:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8135] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8139] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8146] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8200] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8219] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8221] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8340] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8361] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8381] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8384] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8385] Config: added 'scan_ssid' value '1'
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8386] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8388] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.8388] Config: added 'psk' value '<hidden>'
Oct 11 09:54:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/158
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.9102] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:54:21 IQ138000 NetworkManager[403]: <info>  [1760176461.9121] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:54:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:36 IQ138000 npm[3801]: [2025-10-11 09:54:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.4,"last_seen":1760176476678,"linkquality":40,"power_outage_count":25795,"pressure":992.7,"temperature":21.64,"voltage":3005}'
Oct 11 09:54:36 IQ138000 npm[3801]: [2025-10-11 09:54:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.81,"last_seen":1760176476691,"linkquality":40,"power_outage_count":25795,"pressure":992.7,"temperature":21.64,"voltage":3005}'
Oct 11 09:54:36 IQ138000 npm[3801]: [2025-10-11 09:54:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.81,"last_seen":1760176476705,"linkquality":40,"power_outage_count":25795,"pressure":993,"temperature":21.64,"voltage":3005}'
Oct 11 09:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:54:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:47 IQ138000 NetworkManager[403]: <warn>  [1760176487.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:54:47 IQ138000 NetworkManager[403]: <info>  [1760176487.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:54:47 IQ138000 NetworkManager[403]: <warn>  [1760176487.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:54:47 IQ138000 NetworkManager[403]: <info>  [1760176487.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:54:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/158
Oct 11 09:54:47 IQ138000 NetworkManager[403]: <info>  [1760176487.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:54:47 IQ138000 NetworkManager[403]: <info>  [1760176487.0723] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:54:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:54:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:54:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:54:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:54:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:54:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:54:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:54:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:54:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:54:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:54:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:54:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:54:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:54:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:54:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:54:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:54:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:54:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:54:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:54:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:54:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:54:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:54:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:54:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:54:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:54:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:54:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:54:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:54:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:54:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:54:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:54:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:54:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:54:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:54:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:54:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:54:53 IQ138000 NetworkManager[403]: <info>  [1760176493.5288] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:54:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:54:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:55:01 IQ138000 CRON[20263]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 09:55:01 IQ138000 CRON[20267]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 09:55:01 IQ138000 CRON[20263]: pam_unix(cron:session): session closed for user root
Oct 11 09:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:55:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:55:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:13 IQ138000 wb-watchdog[20445]: [INFO] Interval #219 started. Waiting up to 60 seconds for error...
Oct 11 09:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:55:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:55:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:55:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:55:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:55:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:55:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:55:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:55:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:55:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:55:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:55:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:55:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:55:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:55:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:55:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:55:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:55:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:55:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:55:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:55:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:55:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:55:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:55:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:55:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:55:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:55:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:55:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:55:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:55:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:55:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:55:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:55:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:55:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:55:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:55:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:55:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:55:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:55:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:55:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:55:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:55:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:55:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:55:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L2, row count 7183, limit 7042
Oct 11 09:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4650] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4669] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4686] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4788] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4812] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4814] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4922] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4946] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4969] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4984] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4986] Config: added 'scan_ssid' value '1'
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4987] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4988] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.4989] Config: added 'psk' value '<hidden>'
Oct 11 09:55:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/159
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.5737] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:55:48 IQ138000 NetworkManager[403]: <info>  [1760176548.5739] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:55:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:55:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:55:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:55:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:55:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:55:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:55:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:55:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:55:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:55:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:55:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:55:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:55:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:55:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:55:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:55:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:55:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:55:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:55:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:55:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:55:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:55:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:55:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:55:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:55:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:55:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:55:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:55:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:55:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:55:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:55:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:55:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:55:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:55:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:55:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:56:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:56:13 IQ138000 wb-watchdog[21149]: [INFO] Interval #220 started. Waiting up to 60 seconds for error...
Oct 11 09:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 09:56:14 IQ138000 NetworkManager[403]: <warn>  [1760176574.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:56:14 IQ138000 NetworkManager[403]: <info>  [1760176574.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:56:14 IQ138000 NetworkManager[403]: <warn>  [1760176574.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:56:14 IQ138000 NetworkManager[403]: <info>  [1760176574.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:56:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:56:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/159
Oct 11 09:56:14 IQ138000 NetworkManager[403]: <info>  [1760176574.0659] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:56:14 IQ138000 NetworkManager[403]: <info>  [1760176574.0660] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:56:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:56:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:56:20 IQ138000 NetworkManager[403]: <info>  [1760176580.1852] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:56:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:56:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:56:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:56:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:56:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:56:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:56:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:56:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:56:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:56:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:56:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:56:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:56:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:56:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:56:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:56:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:56:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:56:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:56:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:56:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:56:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:56:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:56:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:56:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:56:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:56:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:56:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:56:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:56:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:56:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:56:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:56:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:56:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:56:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:56:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:56:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:56:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:30 IQ138000 npm[3801]: [2025-10-11 09:56:30] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.97,"last_seen":1760176590774,"linkquality":51,"power_outage_count":35250,"temperature":23.76,"voltage":3075}'
Oct 11 09:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:56:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:41 IQ138000 npm[3801]: [2025-10-11 09:56:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.96,"last_seen":1760176601876,"linkquality":102,"power_outage_count":48745,"temperature":26.75,"voltage":3025}'
Oct 11 09:56:41 IQ138000 npm[3801]: [2025-10-11 09:56:41] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.66,"last_seen":1760176601887,"linkquality":102,"power_outage_count":48745,"temperature":26.75,"voltage":3025}'
Oct 11 09:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 09:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:56:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:56:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5892 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:56:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:56:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:56:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:56:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:56:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:56:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:56:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:56:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:56:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:56:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:56:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:56:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:56:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:56:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:56:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:56:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:56:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:56:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:56:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:56:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:56:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:56:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:56:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:56:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:56:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:56:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:56:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:56:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:56:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:56:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:56:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:56:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:56:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:56:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:56:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:56:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-watchdog[21759]: [INFO] Interval #221 started. Waiting up to 60 seconds for error...
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 09:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1453] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1460] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1468] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1557] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1574] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1575] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1706] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1756] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1780] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1786] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1788] Config: added 'scan_ssid' value '1'
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1790] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1793] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:57:15 IQ138000 NetworkManager[403]: <info>  [1760176635.1796] Config: added 'psk' value '<hidden>'
Oct 11 09:57:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/160
Oct 11 09:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:18 IQ138000 NetworkManager[403]: <info>  [1760176638.2721] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:57:18 IQ138000 NetworkManager[403]: <info>  [1760176638.2723] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:57:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:57:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:57:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:57:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:57:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:57:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:57:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:57:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:57:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:57:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:57:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:57:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:57:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:57:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:57:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:57:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:57:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:57:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:57:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:57:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:57:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:57:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:57:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:57:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:57:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:57:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:57:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:57:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:57:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:57:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:57:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:57:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:57:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:57:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:57:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:57:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:57:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:57:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:57:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:57:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L2, row count 7183, limit 7042
Oct 11 09:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:40 IQ138000 NetworkManager[403]: <warn>  [1760176660.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:57:40 IQ138000 NetworkManager[403]: <info>  [1760176660.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:57:40 IQ138000 NetworkManager[403]: <warn>  [1760176660.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:57:40 IQ138000 NetworkManager[403]: <info>  [1760176660.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:57:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 09:57:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/160
Oct 11 09:57:40 IQ138000 NetworkManager[403]: <info>  [1760176660.0757] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:57:40 IQ138000 NetworkManager[403]: <info>  [1760176660.0759] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:45 IQ138000 NetworkManager[403]: <info>  [1760176665.8649] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:57:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:57:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:57:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:57:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:57:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:57:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:57:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:57:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:57:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:57:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:57:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:57:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:57:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:57:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:57:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:57:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:57:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:57:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:57:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:57:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:57:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:57:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:57:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:57:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:57:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:57:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:57:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:57:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:57:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:57:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:57:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:57:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:57:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:57:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:57:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:57:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 09:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:58:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:58:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:13 IQ138000 wb-watchdog[22463]: [INFO] Interval #222 started. Waiting up to 60 seconds for error...
Oct 11 09:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:58:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:58:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:58:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:58:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:58:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:58:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:58:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:58:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:58:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:58:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:58:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:58:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:58:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:58:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:58:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:58:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:58:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:58:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:58:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:58:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:58:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:58:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:58:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:58:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:58:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:58:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:58:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:58:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:58:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:58:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:58:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:58:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:58:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:58:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:58:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:58:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:29 IQ138000 npm[3801]: [2025-10-11 09:58:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.81,"last_seen":1760176709379,"linkquality":36,"power_outage_count":25795,"pressure":993,"temperature":21.62,"voltage":3005}'
Oct 11 09:58:29 IQ138000 npm[3801]: [2025-10-11 09:58:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.4,"last_seen":1760176709391,"linkquality":32,"power_outage_count":25795,"pressure":993,"temperature":21.62,"voltage":3005}'
Oct 11 09:58:29 IQ138000 npm[3801]: [2025-10-11 09:58:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.4,"last_seen":1760176709391,"linkquality":32,"power_outage_count":25795,"pressure":992.7,"temperature":21.62,"voltage":3005}'
Oct 11 09:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.8853] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.8858] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.8864] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.8916] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.8936] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.8938] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9023] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9045] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9064] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9068] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9069] Config: added 'scan_ssid' value '1'
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9070] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9071] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 09:58:40 IQ138000 NetworkManager[403]: <info>  [1760176720.9072] Config: added 'psk' value '<hidden>'
Oct 11 09:58:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/161
Oct 11 09:58:43 IQ138000 NetworkManager[403]: <info>  [1760176723.9867] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 09:58:43 IQ138000 NetworkManager[403]: <info>  [1760176723.9869] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 09:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:58:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:58:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:58:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:58:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:58:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:58:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:58:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:58:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:58:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:58:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:58:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:58:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:58:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:58:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:58:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:58:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:58:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:58:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:58:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:58:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:58:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:58:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:58:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:58:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:58:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:58:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:58:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:58:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:58:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:58:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:58:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:58:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:58:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:58:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:58:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:59:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:06 IQ138000 NetworkManager[403]: <warn>  [1760176746.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 09:59:06 IQ138000 NetworkManager[403]: <info>  [1760176746.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 09:59:06 IQ138000 NetworkManager[403]: <warn>  [1760176746.0259] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 09:59:06 IQ138000 NetworkManager[403]: <info>  [1760176746.0288] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 09:59:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/161
Oct 11 09:59:06 IQ138000 NetworkManager[403]: <info>  [1760176746.0775] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 09:59:06 IQ138000 NetworkManager[403]: <info>  [1760176746.0777] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 09:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:10 IQ138000 npm[3801]: [2025-10-11 09:59:10] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.4,"last_seen":1760176750114,"linkquality":25,"power_outage_count":25795,"pressure":992.7,"temperature":21.59,"voltage":3005}'
Oct 11 09:59:10 IQ138000 npm[3801]: [2025-10-11 09:59:10] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.63,"last_seen":1760176750133,"linkquality":18,"power_outage_count":25795,"pressure":992.7,"temperature":21.59,"voltage":3005}'
Oct 11 09:59:10 IQ138000 npm[3801]: [2025-10-11 09:59:10] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.63,"last_seen":1760176750154,"linkquality":18,"power_outage_count":25795,"pressure":993,"temperature":21.59,"voltage":3005}'
Oct 11 09:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:59:11 IQ138000 NetworkManager[403]: <info>  [1760176751.6454] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 09:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:13 IQ138000 wb-watchdog[23066]: [INFO] Interval #223 started. Waiting up to 60 seconds for error...
Oct 11 09:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 09:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:59:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8966 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 09:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:59:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:59:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:59:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:59:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:59:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:59:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:59:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:59:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:59:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:59:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:59:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:59:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:59:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:59:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:59:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:59:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:59:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:59:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:59:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:59:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:59:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:59:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:59:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:59:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:59:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:59:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:59:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:59:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:59:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:59:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:59:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:59:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:59:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:59:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:59:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:59:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:59:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:59:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L1, row count 7183, limit 7042
Oct 11 09:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:59:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 09:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 09:59:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 09:59:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 09:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 09:59:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 09:59:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 09:59:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 09:59:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 09:59:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 09:59:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 09:59:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 09:59:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 09:59:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 09:59:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 09:59:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 09:59:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 09:59:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 09:59:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 09:59:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 09:59:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 09:59:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 09:59:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 09:59:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 09:59:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 09:59:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 09:59:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:59:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 09:59:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 09:59:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 09:59:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:59:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 09:59:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 09:59:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 09:59:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 09:59:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 09:59:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 09:59:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 09:59:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 09:59:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 09:59:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 09:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 09:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 09:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 09:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:00:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:00:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6330] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6335] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6344] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6389] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6406] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6409] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6508] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6541] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6559] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6562] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6563] Config: added 'scan_ssid' value '1'
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6564] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6565] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.6566] Config: added 'psk' value '<hidden>'
Oct 11 10:00:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/162
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.7427] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:00:06 IQ138000 NetworkManager[403]: <info>  [1760176806.7429] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:13 IQ138000 wb-watchdog[23790]: [INFO] Interval #224 started. Waiting up to 60 seconds for error...
Oct 11 10:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:00:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:00:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:00:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:00:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:00:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:00:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:00:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:00:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:00:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:00:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:00:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:00:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:00:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:00:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:00:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:00:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:00:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:00:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:00:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:00:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:00:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:00:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:00:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:00:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:00:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:00:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:00:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:00:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:00:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:00:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:00:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:00:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:00:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:00:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:00:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:00:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:00:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:00:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:00:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:00:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:00:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:32 IQ138000 NetworkManager[403]: <warn>  [1760176832.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:00:32 IQ138000 NetworkManager[403]: <info>  [1760176832.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:00:32 IQ138000 NetworkManager[403]: <warn>  [1760176832.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:00:32 IQ138000 NetworkManager[403]: <info>  [1760176832.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:00:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/162
Oct 11 10:00:32 IQ138000 NetworkManager[403]: <info>  [1760176832.0692] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:00:32 IQ138000 NetworkManager[403]: <info>  [1760176832.0694] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:38 IQ138000 NetworkManager[403]: <info>  [1760176838.3413] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:00:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:00:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:00:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:00:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:00:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:00:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:00:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:00:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:00:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:00:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:00:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:00:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:00:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:00:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:00:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:00:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:00:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:00:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:00:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:00:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:00:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:00:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:00:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:00:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:00:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:00:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:00:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:00:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:00:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:00:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:00:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:00:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:00:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:00:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:00:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:00:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:00:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:00:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:00:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-watchdog[24402]: [INFO] Interval #225 started. Waiting up to 60 seconds for error...
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:01:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:01:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:01:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:01:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:01:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:01:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:01:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:01:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:01:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:01:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:01:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:01:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:01:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:01:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:01:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:01:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:01:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:01:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:01:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:01:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:01:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:01:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:01:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:01:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:01:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:01:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:01:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:01:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:01:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:01:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:01:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:01:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:01:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:01:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:01:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:01:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:01:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3050] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3055] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3090] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3153] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3171] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3173] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3273] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3296] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3325] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3328] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3330] Config: added 'scan_ssid' value '1'
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3331] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3332] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.3333] Config: added 'psk' value '<hidden>'
Oct 11 10:01:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/163
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.4125] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:01:33 IQ138000 NetworkManager[403]: <info>  [1760176893.4128] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:01:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:01:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:01:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:01:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:01:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:01:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:01:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:01:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:01:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:01:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:01:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:01:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:01:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:01:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:01:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:01:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:01:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:01:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:01:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:01:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:01:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:01:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:01:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:01:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:01:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:01:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:01:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:01:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:01:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:01:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:01:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:01:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:01:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:01:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:01:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:01:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:01:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:01:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:01:59 IQ138000 NetworkManager[403]: <warn>  [1760176919.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:01:59 IQ138000 NetworkManager[403]: <info>  [1760176919.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:01:59 IQ138000 NetworkManager[403]: <warn>  [1760176919.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:01:59 IQ138000 NetworkManager[403]: <info>  [1760176919.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:01:59 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:01:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/163
Oct 11 10:01:59 IQ138000 NetworkManager[403]: <info>  [1760176919.0651] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:01:59 IQ138000 NetworkManager[403]: <info>  [1760176919.0653] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:01:59 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:02:05 IQ138000 NetworkManager[403]: <info>  [1760176925.0728] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:02:13 IQ138000 wb-watchdog[25093]: [INFO] Interval #226 started. Waiting up to 60 seconds for error...
Oct 11 10:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:02:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:02:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:02:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:02:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:02:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:02:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:02:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:02:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:02:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:02:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:02:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:02:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:02:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:02:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:02:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:02:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:02:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:02:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:02:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:02:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:02:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:02:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:02:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:02:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:02:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:02:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:02:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:02:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:02:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:02:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:02:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:02:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:02:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:02:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:02:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:02:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:02:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:02:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:02:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:02:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:02:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:02:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:02:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:02:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:02:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:02:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:02:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:02:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:02:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:02:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:02:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:02:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:02:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:02:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:02:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:02:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:02:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:02:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:02:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:02:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:02:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:02:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:02:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:02:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:02:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:02:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:02:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:02:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:02:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:02:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:02:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:02:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:02:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:02:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:02:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:02:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0135] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0140] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0145] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0209] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0226] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0228] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0354] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0382] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0406] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0412] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0414] Config: added 'scan_ssid' value '1'
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0415] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0418] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:03:00 IQ138000 NetworkManager[403]: <info>  [1760176980.0420] Config: added 'psk' value '<hidden>'
Oct 11 10:03:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/164
Oct 11 10:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:03 IQ138000 NetworkManager[403]: <info>  [1760176983.1194] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:03:03 IQ138000 NetworkManager[403]: <info>  [1760176983.1196] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:03:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:13 IQ138000 wb-watchdog[25715]: [INFO] Interval #227 started. Waiting up to 60 seconds for error...
Oct 11 10:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:03:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:03:25 IQ138000 NetworkManager[403]: <warn>  [1760177005.0240] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:03:25 IQ138000 NetworkManager[403]: <info>  [1760177005.0242] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:03:25 IQ138000 NetworkManager[403]: <warn>  [1760177005.0272] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:03:25 IQ138000 NetworkManager[403]: <info>  [1760177005.0285] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:03:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/164
Oct 11 10:03:25 IQ138000 NetworkManager[403]: <info>  [1760177005.0706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:03:25 IQ138000 NetworkManager[403]: <info>  [1760177005.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:03:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:03:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:03:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:03:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:03:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:03:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:03:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:03:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:03:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:03:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:03:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:03:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:03:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:03:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:03:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:03:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:03:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:03:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:03:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:03:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:03:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:03:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:03:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:03:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:03:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:03:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:03:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:03:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:03:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:03:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:03:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:03:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:03:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:03:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:03:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:03:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:03:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:03:30 IQ138000 NetworkManager[403]: <info>  [1760177010.7640] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:32 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:03:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:03:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:03:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:03:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:03:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:03:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:03:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:03:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:03:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:03:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:03:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:03:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:03:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:03:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:03:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:03:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:03:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:03:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:03:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:03:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:03:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:03:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:03:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:03:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:03:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:03:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:03:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:03:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:03:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:03:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:03:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:03:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:03:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:03:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:03:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:03:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:03:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:03:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:03:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:03:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:03:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:13 IQ138000 wb-watchdog[26405]: [INFO] Interval #228 started. Waiting up to 60 seconds for error...
Oct 11 10:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6524] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6529] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6535] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6618] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6640] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6642] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:04:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6803] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6840] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6882] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6886] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6888] Config: added 'scan_ssid' value '1'
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6889] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6891] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.6892] Config: added 'psk' value '<hidden>'
Oct 11 10:04:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/165
Oct 11 10:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:04:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:04:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:04:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:04:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:04:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:04:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:04:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:04:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:04:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:04:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:04:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:04:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:04:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:04:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:04:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:04:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:04:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:04:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:04:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:04:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:04:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:04:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:04:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:04:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:04:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:04:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.8005] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:04:25 IQ138000 NetworkManager[403]: <info>  [1760177065.8007] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:04:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:04:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:04:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:04:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:04:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:04:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:04:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:04:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:04:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:04:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:04:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:04:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:04:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:04:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:51 IQ138000 NetworkManager[403]: <warn>  [1760177091.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:04:51 IQ138000 NetworkManager[403]: <info>  [1760177091.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:04:51 IQ138000 NetworkManager[403]: <warn>  [1760177091.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:04:51 IQ138000 NetworkManager[403]: <info>  [1760177091.0274] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:04:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/165
Oct 11 10:04:51 IQ138000 NetworkManager[403]: <info>  [1760177091.0731] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:04:51 IQ138000 NetworkManager[403]: <info>  [1760177091.0733] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:04:54 IQ138000 npm[3801]: [2025-10-11 10:04:54] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.63,"last_seen":1760177094009,"linkquality":47,"power_outage_count":25795,"pressure":993,"temperature":21.75,"voltage":3005}'
Oct 11 10:04:54 IQ138000 npm[3801]: [2025-10-11 10:04:54] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.19,"last_seen":1760177094026,"linkquality":47,"power_outage_count":25795,"pressure":993,"temperature":21.75,"voltage":3005}'
Oct 11 10:04:54 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0007e48747/temperature, row count 7183, limit 7042
Oct 11 10:04:54 IQ138000 npm[3801]: [2025-10-11 10:04:54] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.19,"last_seen":1760177094026,"linkquality":47,"power_outage_count":25795,"pressure":992.7,"temperature":21.75,"voltage":3005}'
Oct 11 10:04:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:04:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:04:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:04:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:04:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:04:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:04:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:04:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:04:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:04:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:04:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:04:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:04:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:04:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:04:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:04:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:04:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:04:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:04:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:04:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:04:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:04:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:04:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:04:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:04:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:04:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:04:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:04:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:04:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:04:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:04:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:04:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:04:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:04:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:04:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:04:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:04:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:04:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:04:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:04:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:04:57 IQ138000 NetworkManager[403]: <info>  [1760177097.3532] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:01 IQ138000 CRON[26852]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:05:01 IQ138000 CRON[26856]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 10:05:01 IQ138000 CRON[26852]: pam_unix(cron:session): session closed for user root
Oct 11 10:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:05:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:14 IQ138000 wb-watchdog[27037]: [INFO] Interval #229 started. Waiting up to 60 seconds for error...
Oct 11 10:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:05:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:05:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:05:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:05:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:05:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:05:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:05:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:05:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:05:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:05:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:05:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:05:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:05:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:05:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:05:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:05:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:05:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:05:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:05:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:05:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:05:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:05:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:05:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:05:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:05:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:05:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:05:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:05:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:05:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:05:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:05:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:05:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:05:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:05:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:05:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:05:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:05:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:05:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:05:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:05:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2614] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2641] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2648] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2706] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2723] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2725] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2884] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2948] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2967] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2970] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2972] Config: added 'scan_ssid' value '1'
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2973] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2974] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.2975] Config: added 'psk' value '<hidden>'
Oct 11 10:05:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/166
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.3794] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:05:52 IQ138000 NetworkManager[403]: <info>  [1760177152.3796] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:05:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:05:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:05:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:05:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:05:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:05:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:05:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:05:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:05:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:05:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:05:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:05:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:05:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:05:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:05:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:05:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:05:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:05:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:05:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:05:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:05:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:05:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:05:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:05:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:05:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:05:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:05:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:05:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:05:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:05:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:05:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:05:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:05:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:05:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:05:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:05:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:05:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:06:14 IQ138000 wb-watchdog[27755]: [INFO] Interval #230 started. Waiting up to 60 seconds for error...
Oct 11 10:06:18 IQ138000 NetworkManager[403]: <warn>  [1760177178.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:06:18 IQ138000 NetworkManager[403]: <info>  [1760177178.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:06:18 IQ138000 NetworkManager[403]: <warn>  [1760177178.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:06:18 IQ138000 NetworkManager[403]: <info>  [1760177178.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:06:18 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:06:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/166
Oct 11 10:06:18 IQ138000 NetworkManager[403]: <info>  [1760177178.0668] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:06:18 IQ138000 NetworkManager[403]: <info>  [1760177178.0671] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:18 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:06:24 IQ138000 NetworkManager[403]: <info>  [1760177184.0394] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:06:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:06:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:06:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:06:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:06:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:06:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:06:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:06:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:06:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:06:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:06:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:06:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:06:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:06:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:06:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:06:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:06:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:06:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:06:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:06:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:06:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:06:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:06:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:06:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:06:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:06:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:06:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:06:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:06:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:06:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:06:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:06:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:06:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:06:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:06:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:06:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:06:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:06:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:06:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:06:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:06:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:06:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:06:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:06:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:06:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:06:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:06:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:06:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:06:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:06:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:06:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:06:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:06:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:06:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:06:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:06:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:06:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:06:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:06:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:06:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:06:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:06:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:06:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:06:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:06:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:06:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:06:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:06:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:06:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:06:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:06:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:06:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:06:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:06:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:06:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:06:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:06:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:06:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:06:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:07:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:14 IQ138000 wb-watchdog[28349]: [INFO] Interval #231 started. Waiting up to 60 seconds for error...
Oct 11 10:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1417] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1428] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1435] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1488] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1508] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1510] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1625] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1650] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1668] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1671] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1673] Config: added 'scan_ssid' value '1'
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1674] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1675] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:07:19 IQ138000 NetworkManager[403]: <info>  [1760177239.1676] Config: added 'psk' value '<hidden>'
Oct 11 10:07:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/167
Oct 11 10:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:07:23 IQ138000 NetworkManager[403]: <info>  [1760177243.2386] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:07:23 IQ138000 NetworkManager[403]: <info>  [1760177243.2395] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:07:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:07:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:07:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:07:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:07:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:07:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:07:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:07:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:07:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:07:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:07:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:07:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:07:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:07:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:07:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:07:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:07:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:07:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:07:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:07:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:07:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:07:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:07:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:07:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:07:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:07:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:07:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:07:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:07:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:07:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:07:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:07:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:07:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:07:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:07:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:07:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:07:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8744 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_22/External Sensor 1, row count 7183, limit 7042
Oct 11 10:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:07:44 IQ138000 NetworkManager[403]: <warn>  [1760177264.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:07:44 IQ138000 NetworkManager[403]: <info>  [1760177264.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:07:44 IQ138000 NetworkManager[403]: <warn>  [1760177264.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:07:44 IQ138000 NetworkManager[403]: <info>  [1760177264.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:07:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/167
Oct 11 10:07:44 IQ138000 NetworkManager[403]: <info>  [1760177264.0724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:07:44 IQ138000 NetworkManager[403]: <info>  [1760177264.0725] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:07:49 IQ138000 NetworkManager[403]: <info>  [1760177269.8609] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:07:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:07:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:07:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:07:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:07:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:07:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:07:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:07:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:07:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:07:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:07:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:07:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:07:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:07:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:07:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:07:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:07:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:07:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:07:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:07:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:07:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:07:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:07:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:07:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:07:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:07:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:07:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:07:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:07:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:07:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:07:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:07:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:07:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:07:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:07:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:07:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:07:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:07:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:01 IQ138000 CRON[28872]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:08:01 IQ138000 CRON[28878]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 10:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:07 IQ138000 sSMTP[28902]: Unable to locate mail
Oct 11 10:08:07 IQ138000 sSMTP[28902]: Cannot open mail:25
Oct 11 10:08:07 IQ138000 cron[28902]: sendmail: Cannot open mail:25
Oct 11 10:08:07 IQ138000 CRON[28872]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 10:08:07 IQ138000 CRON[28872]: pam_unix(cron:session): session closed for user root
Oct 11 10:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:08:14 IQ138000 wb-watchdog[29078]: [INFO] Interval #232 started. Waiting up to 60 seconds for error...
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:08:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:08:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:08:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:08:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:08:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:08:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:08:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:08:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:08:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:08:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:08:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:08:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:08:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:08:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:08:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:08:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:08:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:08:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:08:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:08:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:08:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:08:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:08:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:08:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:08:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:08:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:08:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:08:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:08:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:08:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:08:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:08:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:08:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:08:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:08:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:08:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:08:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:08:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:08:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:08:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:08:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.8937] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.8942] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.8947] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.8994] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9012] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9014] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9135] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9157] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9173] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9176] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9177] Config: added 'scan_ssid' value '1'
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9178] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9180] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9181] Config: added 'psk' value '<hidden>'
Oct 11 10:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:08:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/168
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9923] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:08:44 IQ138000 NetworkManager[403]: <info>  [1760177324.9925] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:08:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:08:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:08:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:08:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:08:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:08:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:08:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:08:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:08:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:08:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:08:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:08:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:08:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:08:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:08:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:08:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:08:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:08:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:08:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:08:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:08:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:08:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:08:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:08:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:08:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:08:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:08:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:08:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:08:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:08:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:08:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:08:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:08:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:08:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:08:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:08:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:08:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:09:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:09:10 IQ138000 NetworkManager[403]: <warn>  [1760177350.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:09:10 IQ138000 NetworkManager[403]: <info>  [1760177350.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:09:10 IQ138000 NetworkManager[403]: <warn>  [1760177350.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:09:10 IQ138000 NetworkManager[403]: <info>  [1760177350.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:09:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/168
Oct 11 10:09:10 IQ138000 NetworkManager[403]: <info>  [1760177350.0756] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:09:10 IQ138000 NetworkManager[403]: <info>  [1760177350.0758] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:14 IQ138000 wb-watchdog[29681]: [INFO] Interval #233 started. Waiting up to 60 seconds for error...
Oct 11 10:09:15 IQ138000 NetworkManager[403]: <info>  [1760177355.6707] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:09:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:09:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:09:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:09:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:09:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:09:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:09:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:09:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:09:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:09:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:09:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:09:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:09:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:09:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:09:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:09:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:09:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:09:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:09:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:09:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:09:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:09:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:09:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:09:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:09:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:09:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:09:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:09:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:09:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:09:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:09:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:09:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:09:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:09:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:09:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:09:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:09:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:09:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:09:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:09:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:09:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:09:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:09:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:09:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:09:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:09:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:09:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:09:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:09:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:09:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:09:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:09:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:09:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:09:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:09:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:09:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:09:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:09:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:09:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:09:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:09:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:09:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:09:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:09:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:09:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:09:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:09:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:09:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:09:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:09:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:09:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:09:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:09:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:09:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:09:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:09:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:09:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:09:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.5987] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.5992] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6000] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6090] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6112] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6114] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6211] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6231] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6250] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6254] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6255] Config: added 'scan_ssid' value '1'
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6256] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6258] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.6259] Config: added 'psk' value '<hidden>'
Oct 11 10:10:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/169
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.7002] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:10:10 IQ138000 NetworkManager[403]: <info>  [1760177410.7004] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:10:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:10:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:14 IQ138000 wb-watchdog[30383]: [INFO] Interval #234 started. Waiting up to 60 seconds for error...
Oct 11 10:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:10:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:10:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:10:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:10:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:10:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:10:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:10:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:10:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:10:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:10:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:10:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:10:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:10:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:10:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:10:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:10:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:10:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:10:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:10:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:10:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:10:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:10:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:10:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:10:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:10:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:10:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:10:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:10:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:10:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:10:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:10:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:10:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:10:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:10:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:10:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:10:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:10:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:10:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:10:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8724 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:36 IQ138000 NetworkManager[403]: <warn>  [1760177436.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:10:36 IQ138000 NetworkManager[403]: <info>  [1760177436.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:10:36 IQ138000 NetworkManager[403]: <warn>  [1760177436.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:10:36 IQ138000 NetworkManager[403]: <info>  [1760177436.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:10:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:10:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/169
Oct 11 10:10:36 IQ138000 NetworkManager[403]: <info>  [1760177436.0783] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:10:36 IQ138000 NetworkManager[403]: <info>  [1760177436.0785] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:10:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:42 IQ138000 NetworkManager[403]: <info>  [1760177442.3460] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:10:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:10:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:10:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:10:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:10:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:10:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:10:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:10:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:10:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:10:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:10:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:10:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:10:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:10:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:10:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:10:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:10:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:10:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:10:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:10:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:10:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:10:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:10:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:10:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:10:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:10:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:10:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:10:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:10:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:10:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:10:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:10:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:10:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:10:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:10:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:10:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:10:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:11:14 IQ138000 wb-watchdog[31004]: [INFO] Interval #235 started. Waiting up to 60 seconds for error...
Oct 11 10:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:11:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:11:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:11:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:11:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:11:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:11:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:11:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:11:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:11:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:11:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:11:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:11:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:11:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:11:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:11:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:11:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:11:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:11:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:11:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:11:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:11:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:11:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:11:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:11:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:11:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:11:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:11:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:11:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:11:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:11:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:11:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:11:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:11:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:11:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:11:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:11:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:11:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:11:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L3, row count 7183, limit 7042
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.3768] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.3787] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.3794] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.3848] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.3865] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.3866] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4053] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4091] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4118] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4122] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4123] Config: added 'scan_ssid' value '1'
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4124] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4126] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:11:37 IQ138000 NetworkManager[403]: <info>  [1760177497.4127] Config: added 'psk' value '<hidden>'
Oct 11 10:11:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/170
Oct 11 10:11:40 IQ138000 NetworkManager[403]: <info>  [1760177500.5147] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:11:40 IQ138000 NetworkManager[403]: <info>  [1760177500.5149] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:11:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:11:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:11:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:11:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:11:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:11:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:11:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:11:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:11:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:11:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:11:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:11:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:11:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:11:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:11:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:11:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:11:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:11:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:11:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:11:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:11:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:11:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:11:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:11:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:11:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:11:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:11:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:11:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:11:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:11:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:11:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:11:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:11:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:11:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:11:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:11:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:11:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:11:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:11:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:03 IQ138000 NetworkManager[403]: <warn>  [1760177523.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:12:03 IQ138000 NetworkManager[403]: <info>  [1760177523.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:12:03 IQ138000 NetworkManager[403]: <warn>  [1760177523.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:12:03 IQ138000 NetworkManager[403]: <info>  [1760177523.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:12:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/170
Oct 11 10:12:03 IQ138000 NetworkManager[403]: <info>  [1760177523.0703] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:12:03 IQ138000 NetworkManager[403]: <info>  [1760177523.0705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:09 IQ138000 NetworkManager[403]: <info>  [1760177529.1937] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:14 IQ138000 wb-watchdog[31704]: [INFO] Interval #236 started. Waiting up to 60 seconds for error...
Oct 11 10:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:12:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:12:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:12:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:12:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:12:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:12:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:12:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:12:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:12:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:12:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:12:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:12:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:12:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:12:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:12:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:12:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:12:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:12:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:12:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:12:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:12:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:12:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:12:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:12:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:12:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:12:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:12:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:12:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:12:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:12:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:12:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:12:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:12:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:12:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:12:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:12:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:12:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:12:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:12:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:12:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L2, row count 7183, limit 7042
Oct 11 10:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:12:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:12:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:12:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:12:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:12:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:12:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:12:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:12:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:12:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:12:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:12:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:12:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:12:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:12:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:12:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:12:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:12:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:12:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:12:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:12:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:12:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:12:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:12:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:12:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:12:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:12:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:12:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:12:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:12:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:12:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:12:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:12:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:12:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:12:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:12:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:12:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:12:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:13:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:13:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3240] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3245] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3251] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3307] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3330] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3332] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3418] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3438] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3456] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3460] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3461] Config: added 'scan_ssid' value '1'
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3462] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3464] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.3465] Config: added 'psk' value '<hidden>'
Oct 11 10:13:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/171
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.4347] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:13:04 IQ138000 NetworkManager[403]: <info>  [1760177584.4349] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:13:14 IQ138000 wb-watchdog[32309]: [INFO] Interval #237 started. Waiting up to 60 seconds for error...
Oct 11 10:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:13:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:13:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:13:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:13:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:13:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:13:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:13:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:13:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:13:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:13:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:13:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:13:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:13:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:13:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:13:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:13:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:13:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:13:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:13:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:13:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:13:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:13:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:13:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:13:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:13:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:13:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:13:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:13:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:13:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:13:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:13:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:13:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:13:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:13:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:13:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:13:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:13:30 IQ138000 NetworkManager[403]: <warn>  [1760177610.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:13:30 IQ138000 NetworkManager[403]: <info>  [1760177610.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:13:30 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:13:30 IQ138000 NetworkManager[403]: <warn>  [1760177610.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:13:30 IQ138000 NetworkManager[403]: <info>  [1760177610.0282] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:13:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/171
Oct 11 10:13:30 IQ138000 NetworkManager[403]: <info>  [1760177610.0784] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:13:30 IQ138000 NetworkManager[403]: <info>  [1760177610.0787] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:13:30 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:13:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:13:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:36 IQ138000 NetworkManager[403]: <info>  [1760177616.0693] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:13:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:13:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:13:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:13:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:13:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:13:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:13:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:13:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:13:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:13:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:13:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:13:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:13:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:13:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:13:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:13:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:13:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:13:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:13:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:13:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:13:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:13:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:13:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:13:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:13:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:13:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:13:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:13:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:13:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:13:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:13:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:13:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:13:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:13:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:13:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:13:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:13:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:13:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:13:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:14 IQ138000 wb-watchdog[569]: [INFO] Interval #238 started. Waiting up to 60 seconds for error...
Oct 11 10:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:14:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:14:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:14:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:14:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:14:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:14:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:14:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:14:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:14:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:14:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:14:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:14:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:14:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:14:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:14:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:14:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:14:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:14:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:14:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:14:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:14:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:14:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:14:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:14:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:14:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:14:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:14:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:14:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:14:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:14:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:14:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:14:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:14:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:14:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:14:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:14:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:14:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:14:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.2893] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.2899] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.2905] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.2963] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.2981] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.2982] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3081] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3100] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3116] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3119] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3120] Config: added 'scan_ssid' value '1'
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3121] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3122] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:14:31 IQ138000 NetworkManager[403]: <info>  [1760177671.3123] Config: added 'psk' value '<hidden>'
Oct 11 10:14:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/172
Oct 11 10:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:35 IQ138000 NetworkManager[403]: <info>  [1760177675.3925] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:14:35 IQ138000 NetworkManager[403]: <info>  [1760177675.3927] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:14:57 IQ138000 NetworkManager[403]: <warn>  [1760177697.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:14:57 IQ138000 NetworkManager[403]: <info>  [1760177697.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:14:57 IQ138000 NetworkManager[403]: <warn>  [1760177697.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:14:57 IQ138000 NetworkManager[403]: <info>  [1760177697.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:14:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/172
Oct 11 10:14:57 IQ138000 NetworkManager[403]: <info>  [1760177697.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:14:57 IQ138000 NetworkManager[403]: <info>  [1760177697.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:15:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:15:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:15:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:15:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:15:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:15:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:15:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:15:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:15:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:15:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:15:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:15:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:15:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:15:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:15:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:15:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:15:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:15:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:15:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:15:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:15:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:15:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:15:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:15:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:15:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:15:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:15:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:15:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:15:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:15:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:15:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:15:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:15:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:15:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:15:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:15:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:02 IQ138000 CRON[1006]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:15:02 IQ138000 CRON[1010]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 10:15:02 IQ138000 CRON[1006]: pam_unix(cron:session): session closed for user root
Oct 11 10:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:03 IQ138000 NetworkManager[403]: <info>  [1760177703.0338] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:15:14 IQ138000 wb-watchdog[1193]: [INFO] Interval #239 started. Waiting up to 60 seconds for error...
Oct 11 10:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 10:15:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 10:15:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 10:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:15:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:15:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:15:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:15:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:15:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:15:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:15:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:15:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:15:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:15:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:15:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:15:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:15:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:15:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:15:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:15:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:15:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:15:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:15:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:15:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:15:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:15:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:15:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:15:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:15:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:15:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:15:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:15:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:15:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:15:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:15:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:15:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:15:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:15:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:15:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:15:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:15:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:15:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2092] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2099] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2106] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2249] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2293] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2296] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2483] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2513] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2538] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2543] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2544] Config: added 'scan_ssid' value '1'
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2545] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2546] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.2547] Config: added 'psk' value '<hidden>'
Oct 11 10:15:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/173
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.3406] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:15:58 IQ138000 NetworkManager[403]: <info>  [1760177758.3409] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:16:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:16:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:16:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:16:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:16:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:16:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:16:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:16:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:16:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:16:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:16:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:16:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:16:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:16:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:16:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:16:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:16:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:16:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:16:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:16:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:16:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:16:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:16:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:16:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:16:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:16:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:16:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:16:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:16:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:16:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:16:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:16:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:16:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:16:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:16:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:16:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:16:14 IQ138000 wb-watchdog[1914]: [INFO] Interval #240 started. Waiting up to 60 seconds for error...
Oct 11 10:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:23 IQ138000 NetworkManager[403]: <warn>  [1760177783.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:16:23 IQ138000 NetworkManager[403]: <info>  [1760177783.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:16:23 IQ138000 NetworkManager[403]: <warn>  [1760177783.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:16:23 IQ138000 NetworkManager[403]: <info>  [1760177783.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:16:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/173
Oct 11 10:16:23 IQ138000 NetworkManager[403]: <info>  [1760177783.0666] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:16:23 IQ138000 NetworkManager[403]: <info>  [1760177783.0668] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:16:29 IQ138000 NetworkManager[403]: <info>  [1760177789.0544] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:16:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:16:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:16:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:16:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:16:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:16:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:16:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:16:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:16:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:16:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:16:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:16:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:16:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:16:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:16:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:16:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:16:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:16:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:16:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:16:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:16:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:16:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:16:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:16:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:16:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:16:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:16:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:16:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:16:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:16:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:16:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:16:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:16:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:16:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:16:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:16:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:16:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:16:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:16:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:16:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:16:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:17:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:17:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:17:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:17:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:17:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:17:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:17:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:17:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:17:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:17:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:17:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:17:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:17:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:17:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:17:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:17:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:17:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:17:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:17:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:17:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:17:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:17:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:17:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:17:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:17:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:17:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:17:01 IQ138000 CRON[2372]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:01 IQ138000 CRON[2378]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 10:17:01 IQ138000 CRON[2372]: pam_unix(cron:session): session closed for user root
Oct 11 10:17:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:17:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:17:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:17:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:17:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:17:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:17:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:17:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:17:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:17:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:17:14 IQ138000 wb-watchdog[2584]: [INFO] Interval #241 started. Waiting up to 60 seconds for error...
Oct 11 10:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:17:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:17:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.1809] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.1814] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.1820] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.1957] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.1977] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.1979] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2088] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2109] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2129] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2133] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2135] Config: added 'scan_ssid' value '1'
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2136] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2137] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2138] Config: added 'psk' value '<hidden>'
Oct 11 10:17:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/174
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2899] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:17:24 IQ138000 NetworkManager[403]: <info>  [1760177844.2901] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:17:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:17:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:17:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:17:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:17:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:17:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:17:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:17:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:17:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:17:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:17:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:17:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:17:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:17:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:17:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:17:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:17:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:17:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:17:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:17:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:17:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:17:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:17:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:17:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:17:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:17:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:17:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:17:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:17:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:17:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:17:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:17:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:17:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:17:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:17:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:17:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:17:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:17:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:49 IQ138000 NetworkManager[403]: <warn>  [1760177869.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:17:49 IQ138000 NetworkManager[403]: <info>  [1760177869.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:17:49 IQ138000 NetworkManager[403]: <warn>  [1760177869.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:17:49 IQ138000 NetworkManager[403]: <info>  [1760177869.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:17:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/174
Oct 11 10:17:49 IQ138000 NetworkManager[403]: <info>  [1760177869.0739] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:17:49 IQ138000 NetworkManager[403]: <info>  [1760177869.0740] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:54 IQ138000 NetworkManager[403]: <info>  [1760177874.9718] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:18:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:18:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:18:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:18:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:18:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:18:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:18:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:18:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:18:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:18:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:18:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:18:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:18:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:18:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:18:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:18:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:18:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:18:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:18:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:18:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:18:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:18:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:18:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:18:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:18:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:18:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:18:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:18:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:18:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:18:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:18:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:18:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:18:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:18:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:18:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:18:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:18:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:18:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:18:14 IQ138000 wb-watchdog[3310]: [INFO] Interval #242 started. Waiting up to 60 seconds for error...
Oct 11 10:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:18:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:18:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:18:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:18:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:18:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:18:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:18:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:18:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:18:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:18:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:18:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:18:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:18:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:18:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:18:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:18:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:18:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:18:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:18:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:18:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:18:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:18:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:18:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:18:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:18:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:18:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:18:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:18:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:18:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:18:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:18:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:18:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:18:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:18:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:18:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:18:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:18:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0018] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0023] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0028] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0145] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0173] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0175] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0279] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0310] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0342] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0356] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0359] Config: added 'scan_ssid' value '1'
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0360] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0362] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.0363] Config: added 'psk' value '<hidden>'
Oct 11 10:18:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/175
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.1114] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:18:50 IQ138000 NetworkManager[403]: <info>  [1760177930.1117] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:19:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:19:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:19:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:19:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:19:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:19:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:19:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:19:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:19:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:19:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:19:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:19:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:19:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:19:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:19:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:19:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:19:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:19:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:19:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:19:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:19:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:19:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:19:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:19:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:19:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:19:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:19:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:19:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:19:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:19:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:19:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:19:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:19:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:19:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:19:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:19:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:14 IQ138000 wb-watchdog[3940]: [INFO] Interval #243 started. Waiting up to 60 seconds for error...
Oct 11 10:19:15 IQ138000 NetworkManager[403]: <warn>  [1760177955.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:19:15 IQ138000 NetworkManager[403]: <info>  [1760177955.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:19:15 IQ138000 NetworkManager[403]: <warn>  [1760177955.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:19:15 IQ138000 NetworkManager[403]: <info>  [1760177955.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:19:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/175
Oct 11 10:19:15 IQ138000 NetworkManager[403]: <info>  [1760177955.0743] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:19:15 IQ138000 NetworkManager[403]: <info>  [1760177955.0746] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:20 IQ138000 NetworkManager[403]: <info>  [1760177960.7472] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:19:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:19:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:19:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:19:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:19:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:19:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:19:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:19:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:19:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:19:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:19:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:19:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:19:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:19:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:19:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:19:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:19:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:19:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:19:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:19:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:19:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:19:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:19:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:19:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:19:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:19:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:19:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:19:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:19:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:19:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:19:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:19:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:19:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:19:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:19:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:19:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L3, row count 7183, limit 7042
Oct 11 10:19:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L1, row count 7183, limit 7042
Oct 11 10:19:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L2, row count 7183, limit 7042
Oct 11 10:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:19:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:19:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:20:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:20:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:20:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:20:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:20:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:20:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:20:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:20:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:20:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:20:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:20:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:20:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:20:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:20:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:20:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:20:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:20:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:20:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:20:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:20:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:20:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:20:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:20:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:20:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:20:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:20:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:20:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:20:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:20:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:20:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:20:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:20:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:20:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:20:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:20:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:20:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:20:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:14 IQ138000 wb-watchdog[4686]: [INFO] Interval #244 started. Waiting up to 60 seconds for error...
Oct 11 10:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.8778] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.8796] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.8808] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.8873] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.8937] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.8939] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9042] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9062] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9080] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9084] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9085] Config: added 'scan_ssid' value '1'
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9086] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9087] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9088] Config: added 'psk' value '<hidden>'
Oct 11 10:20:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/176
Oct 11 10:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9789] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:20:15 IQ138000 NetworkManager[403]: <info>  [1760178015.9792] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:20:22 IQ138000 npm[3801]: [2025-10-11 10:20:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.97,"last_seen":1760178022201,"linkquality":47,"power_outage_count":35250,"temperature":24.04,"voltage":3075}'
Oct 11 10:20:22 IQ138000 npm[3801]: [2025-10-11 10:20:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":42.28,"last_seen":1760178022212,"linkquality":47,"power_outage_count":35250,"temperature":24.04,"voltage":3075}'
Oct 11 10:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:20:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:20:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:20:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:20:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:20:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:20:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:20:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:20:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:20:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:20:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:20:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:20:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:20:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:20:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:20:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:20:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:20:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:20:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:20:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:20:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:20:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:20:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:20:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:20:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:20:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:20:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:20:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:20:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:20:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:20:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:20:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:20:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:20:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:20:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:20:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:20:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:41 IQ138000 NetworkManager[403]: <warn>  [1760178041.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:20:41 IQ138000 NetworkManager[403]: <info>  [1760178041.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:20:41 IQ138000 NetworkManager[403]: <warn>  [1760178041.0306] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:20:41 IQ138000 NetworkManager[403]: <info>  [1760178041.0313] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:20:41 IQ138000 NetworkManager[403]: <info>  [1760178041.0314] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:20:41 IQ138000 NetworkManager[403]: <info>  [1760178041.0392] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:20:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/176
Oct 11 10:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:20:46 IQ138000 NetworkManager[403]: <info>  [1760178046.6590] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:20:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:20:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:21:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:21:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:21:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:21:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:21:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:21:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:21:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:21:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:21:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:21:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:21:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:21:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:21:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:21:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:21:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:21:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:21:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:21:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:21:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:21:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:21:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:21:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:21:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:21:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:21:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:21:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:21:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:21:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:21:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:21:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:21:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:21:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:21:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:21:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:21:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:21:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:21:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:21:14 IQ138000 wb-watchdog[5302]: [INFO] Interval #245 started. Waiting up to 60 seconds for error...
Oct 11 10:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:21:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:21:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:21:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:21:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:21:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:21:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:21:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:21:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:21:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:21:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:21:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:21:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:21:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:21:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:21:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:21:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:21:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:21:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:21:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:21:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:21:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:21:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:21:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:21:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:21:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:21:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:21:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:21:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:21:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:21:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:21:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:21:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:21:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:21:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:21:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:21:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:21:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:21:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8635] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8639] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8645] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8705] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8724] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8726] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8817] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8845] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8863] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8866] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8867] Config: added 'scan_ssid' value '1'
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8868] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8869] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.8870] Config: added 'psk' value '<hidden>'
Oct 11 10:21:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/177
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.9614] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:21:41 IQ138000 NetworkManager[403]: <info>  [1760178101.9621] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:21:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:21:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:22:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:22:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:22:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:22:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:22:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:22:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:22:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:22:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:22:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:22:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:22:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:22:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:22:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:22:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:22:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:22:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:22:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:22:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:22:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:22:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:22:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:22:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:22:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:22:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:22:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:22:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:22:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:22:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:22:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:22:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:22:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:22:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:22:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:22:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:22:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:22:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:07 IQ138000 NetworkManager[403]: <warn>  [1760178127.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:22:07 IQ138000 NetworkManager[403]: <info>  [1760178127.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:22:07 IQ138000 NetworkManager[403]: <warn>  [1760178127.0282] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:22:07 IQ138000 NetworkManager[403]: <info>  [1760178127.0288] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:22:07 IQ138000 NetworkManager[403]: <info>  [1760178127.0290] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:22:07 IQ138000 NetworkManager[403]: <info>  [1760178127.0303] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:22:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/177
Oct 11 10:22:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:22:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 NetworkManager[403]: <info>  [1760178132.6947] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:14 IQ138000 wb-watchdog[5998]: [INFO] Interval #246 started. Waiting up to 60 seconds for error...
Oct 11 10:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:22:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:22:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:25 IQ138000 npm[3801]: [2025-10-11 10:22:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.19,"last_seen":1760178145078,"linkquality":47,"power_outage_count":25795,"pressure":992.7,"temperature":22.26,"voltage":3005}'
Oct 11 10:22:25 IQ138000 npm[3801]: [2025-10-11 10:22:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":46.73,"last_seen":1760178145092,"linkquality":43,"power_outage_count":25795,"pressure":992.7,"temperature":22.26,"voltage":3005}'
Oct 11 10:22:25 IQ138000 npm[3801]: [2025-10-11 10:22:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":46.73,"last_seen":1760178145117,"linkquality":40,"power_outage_count":25795,"pressure":992.8,"temperature":22.26,"voltage":3005}'
Oct 11 10:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:22:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:22:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:22:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:22:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:22:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:22:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:22:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:22:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:22:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:22:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:22:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:22:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:22:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:22:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:22:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:22:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:22:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:22:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:22:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:22:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:22:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:22:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:22:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:22:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:22:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:22:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:22:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:22:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:22:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:22:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:22:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:22:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:22:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:22:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:22:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:22:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:22:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:22:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:23:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:23:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:23:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:23:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:23:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:23:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:23:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:23:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:23:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:23:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:23:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:23:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:23:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:23:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:23:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:23:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:23:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:23:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:23:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:23:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:23:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:23:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:23:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:23:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:23:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:23:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:23:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:23:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:23:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:23:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:23:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:23:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:23:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:23:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:23:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:23:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.8953] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.8958] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.8964] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9017] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9038] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9040] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9121] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9141] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9159] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9162] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9163] Config: added 'scan_ssid' value '1'
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9164] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9165] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9166] Config: added 'psk' value '<hidden>'
Oct 11 10:23:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/178
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9946] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:23:07 IQ138000 NetworkManager[403]: <info>  [1760178187.9949] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:23:14 IQ138000 wb-watchdog[6639]: [INFO] Interval #247 started. Waiting up to 60 seconds for error...
Oct 11 10:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:23:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:23:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:33 IQ138000 NetworkManager[403]: <warn>  [1760178213.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:23:33 IQ138000 NetworkManager[403]: <info>  [1760178213.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:23:33 IQ138000 NetworkManager[403]: <warn>  [1760178213.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:23:33 IQ138000 NetworkManager[403]: <info>  [1760178213.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:23:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/178
Oct 11 10:23:33 IQ138000 NetworkManager[403]: <info>  [1760178213.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:23:33 IQ138000 NetworkManager[403]: <info>  [1760178213.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:23:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:23:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:23:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:23:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:23:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:23:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:23:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:23:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:23:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:23:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:23:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:23:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:23:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:23:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:23:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:23:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:23:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:23:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:23:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:23:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:23:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:23:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:23:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:23:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:23:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:23:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:23:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:23:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:23:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:23:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:23:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:23:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:23:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:23:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:23:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:23:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L2, row count 7183, limit 7042
Oct 11 10:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:38 IQ138000 NetworkManager[403]: <info>  [1760178218.6666] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:39 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:24:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:24:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:24:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:24:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:24:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:24:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:24:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:24:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:24:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:24:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:24:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:24:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:24:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:24:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:24:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:24:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:24:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:24:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:24:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:24:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:24:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:24:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:24:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:24:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:24:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:24:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:24:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:24:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:24:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:24:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:24:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:24:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:24:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:24:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:24:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:24:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:24:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:24:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:24:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:14 IQ138000 wb-watchdog[7339]: [INFO] Interval #248 started. Waiting up to 60 seconds for error...
Oct 11 10:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:24:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:24:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7232] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7237] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7244] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7301] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7322] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7324] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7435] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7476] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7493] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7497] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7499] Config: added 'scan_ssid' value '1'
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7500] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7501] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.7502] Config: added 'psk' value '<hidden>'
Oct 11 10:24:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/179
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.8205] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:24:33 IQ138000 NetworkManager[403]: <info>  [1760178273.8208] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:24:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:24:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:24:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:24:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:24:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:24:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:24:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:24:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:24:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:24:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:24:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:24:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:24:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:24:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:24:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:24:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:24:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:24:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:24:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:24:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:24:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:24:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:24:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:24:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:24:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:24:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:24:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:24:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:24:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:24:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:24:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:24:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:24:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:24:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:24:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:24:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:24:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:24:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:24:59 IQ138000 NetworkManager[403]: <warn>  [1760178299.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:24:59 IQ138000 NetworkManager[403]: <info>  [1760178299.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:24:59 IQ138000 NetworkManager[403]: <warn>  [1760178299.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:24:59 IQ138000 NetworkManager[403]: <info>  [1760178299.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:24:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/179
Oct 11 10:24:59 IQ138000 NetworkManager[403]: <info>  [1760178299.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:24:59 IQ138000 NetworkManager[403]: <info>  [1760178299.0719] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:01 IQ138000 CRON[7766]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:25:01 IQ138000 CRON[7770]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 10:25:01 IQ138000 CRON[7766]: pam_unix(cron:session): session closed for user root
Oct 11 10:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:25:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:25:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:25:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:25:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:25:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:25:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:25:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:25:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:25:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:25:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:25:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:25:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:25:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:25:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:25:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:25:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:25:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:25:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:25:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:25:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:25:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:25:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:25:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:25:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:25:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:25:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:25:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:25:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:25:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:25:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:25:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:25:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:25:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:25:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:25:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:25:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:25:05 IQ138000 NetworkManager[403]: <info>  [1760178305.4741] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:25:14 IQ138000 wb-watchdog[7973]: [INFO] Interval #249 started. Waiting up to 60 seconds for error...
Oct 11 10:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:25:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:25:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:25:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:25:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:25:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:25:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:25:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:25:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:25:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:25:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:25:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:25:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:25:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:25:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:25:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:25:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:25:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:25:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:25:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:25:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:25:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:25:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:25:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:25:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:25:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:25:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:25:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:25:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:25:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:25:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:25:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:25:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:25:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:25:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:25:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:25:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L2, row count 7183, limit 7042
Oct 11 10:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:25:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:25:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5168] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5174] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5181] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5236] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5256] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5258] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5358] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5379] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5397] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5402] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5403] Config: added 'scan_ssid' value '1'
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5404] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5405] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.5406] Config: added 'psk' value '<hidden>'
Oct 11 10:26:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/180
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.6178] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:26:00 IQ138000 NetworkManager[403]: <info>  [1760178360.6180] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:26:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:26:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:26:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:26:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:26:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:26:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:26:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:26:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:26:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:26:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:26:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:26:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:26:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:26:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:26:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:26:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:26:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:26:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:26:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:26:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:26:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:26:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:26:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:26:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:26:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:26:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:26:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:26:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:26:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:26:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:26:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:26:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:26:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:26:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:26:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:26:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:26:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:14 IQ138000 wb-watchdog[8679]: [INFO] Interval #250 started. Waiting up to 60 seconds for error...
Oct 11 10:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:26:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:26:26 IQ138000 NetworkManager[403]: <warn>  [1760178386.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:26:26 IQ138000 NetworkManager[403]: <info>  [1760178386.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:26:26 IQ138000 NetworkManager[403]: <warn>  [1760178386.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:26:26 IQ138000 NetworkManager[403]: <info>  [1760178386.0286] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:26:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:26:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/180
Oct 11 10:26:26 IQ138000 NetworkManager[403]: <info>  [1760178386.0732] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:26:26 IQ138000 NetworkManager[403]: <info>  [1760178386.0741] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:26:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:32 IQ138000 NetworkManager[403]: <info>  [1760178392.2356] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:26:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:26:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:26:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:26:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:26:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:26:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:26:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:26:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:26:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:26:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:26:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:26:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:26:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:26:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:26:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:26:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:26:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:26:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:26:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:26:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:26:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:26:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:26:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:26:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:26:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:26:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:26:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:26:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:26:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:26:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:26:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:26:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:26:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:26:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:26:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:26:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:26:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:26:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:27:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:27:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:27:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:27:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:27:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:27:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:27:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:27:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:27:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:27:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:27:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:27:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:27:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:27:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:27:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:27:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:27:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:27:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:27:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:27:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:27:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:27:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:27:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:27:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:27:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:27:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:27:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:27:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:27:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:27:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:27:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:27:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:27:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:27:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:27:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:27:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-watchdog[9274]: [INFO] Interval #251 started. Waiting up to 60 seconds for error...
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3065] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3103] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3110] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3171] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3190] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3192] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3284] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3345] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3378] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3381] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3382] Config: added 'scan_ssid' value '1'
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3383] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3384] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:27:27 IQ138000 NetworkManager[403]: <info>  [1760178447.3385] Config: added 'psk' value '<hidden>'
Oct 11 10:27:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/181
Oct 11 10:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:31 IQ138000 NetworkManager[403]: <info>  [1760178451.4130] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:27:31 IQ138000 NetworkManager[403]: <info>  [1760178451.4132] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:27:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:27:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:27:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:27:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:27:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:27:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:27:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:27:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:27:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:27:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:27:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:27:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:27:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:27:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:27:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:27:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:27:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:27:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:27:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:27:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:27:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:27:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:27:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:27:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:27:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:27:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:27:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:27:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:27:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:27:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:27:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:27:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:27:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:27:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:27:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:27:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:53 IQ138000 NetworkManager[403]: <warn>  [1760178473.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:27:53 IQ138000 NetworkManager[403]: <info>  [1760178473.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:27:53 IQ138000 NetworkManager[403]: <warn>  [1760178473.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:27:53 IQ138000 NetworkManager[403]: <info>  [1760178473.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:27:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/181
Oct 11 10:27:53 IQ138000 NetworkManager[403]: <info>  [1760178473.0715] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:27:53 IQ138000 NetworkManager[403]: <info>  [1760178473.0726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:27:59 IQ138000 NetworkManager[403]: <info>  [1760178479.0521] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:28:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:28:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:28:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:28:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:28:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:28:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:28:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:28:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:28:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:28:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:28:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:28:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:28:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:28:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:28:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:28:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:28:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:28:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:28:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:28:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:28:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:28:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:28:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:28:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:28:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:28:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:28:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:28:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:28:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:28:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:28:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:28:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:28:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:28:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:28:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:28:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:28:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:14 IQ138000 wb-watchdog[9992]: [INFO] Interval #252 started. Waiting up to 60 seconds for error...
Oct 11 10:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:28:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:28:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:28:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:28:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:28:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:28:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:28:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:28:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:28:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:28:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:28:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:28:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:28:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:28:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:28:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:28:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:28:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:28:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:28:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:28:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:28:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:28:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:28:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:28:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:28:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:28:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:28:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:28:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:28:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:28:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:28:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:28:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:28:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:28:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:28:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:28:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:28:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:28:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1781] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1786] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1791] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1847] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1864] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1866] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1954] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1976] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.1996] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2001] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2002] Config: added 'scan_ssid' value '1'
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2003] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2004] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2006] Config: added 'psk' value '<hidden>'
Oct 11 10:28:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/182
Oct 11 10:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2768] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:28:54 IQ138000 NetworkManager[403]: <info>  [1760178534.2784] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:28:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L2, row count 7183, limit 7042
Oct 11 10:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:28:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:28:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:29:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:29:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:29:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:29:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:29:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:29:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:29:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:29:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:29:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:29:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:29:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:29:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:29:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:29:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:29:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:29:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:29:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:29:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:29:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:29:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:29:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:29:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:29:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:29:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:29:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:29:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:29:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:29:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:29:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:29:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:29:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:29:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:29:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:29:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:29:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:29:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:14 IQ138000 wb-watchdog[10595]: [INFO] Interval #253 started. Waiting up to 60 seconds for error...
Oct 11 10:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:29:19 IQ138000 NetworkManager[403]: <warn>  [1760178559.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:29:19 IQ138000 NetworkManager[403]: <info>  [1760178559.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:29:19 IQ138000 NetworkManager[403]: <warn>  [1760178559.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:29:19 IQ138000 NetworkManager[403]: <info>  [1760178559.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:29:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/182
Oct 11 10:29:19 IQ138000 NetworkManager[403]: <info>  [1760178559.0818] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:29:19 IQ138000 NetworkManager[403]: <info>  [1760178559.0820] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:29:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:29:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:24 IQ138000 NetworkManager[403]: <info>  [1760178564.9184] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:29:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:29:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:29:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:29:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:29:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:29:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:29:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:29:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:29:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:29:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:29:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:29:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:29:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:29:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:29:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:29:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:29:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:29:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:29:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:29:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:29:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:29:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:29:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:29:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:29:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:29:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:29:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:29:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:29:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:29:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:29:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:29:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:29:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:29:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:29:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:29:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:29:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:29:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L3, row count 7183, limit 7042
Oct 11 10:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:29:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:29:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16936 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:30:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:30:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:30:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:30:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:30:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:30:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:30:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:30:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:30:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:30:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:30:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:30:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:30:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:30:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:30:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:30:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:30:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:30:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:30:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:30:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:30:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:30:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:30:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:30:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:30:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:30:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:30:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:30:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:30:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:30:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:30:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:30:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:30:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:30:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:30:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:30:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:30:14 IQ138000 wb-watchdog[11297]: [INFO] Interval #254 started. Waiting up to 60 seconds for error...
Oct 11 10:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:30:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:30:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1203] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1209] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1223] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1277] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1296] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1299] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1386] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1414] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1450] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1455] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1456] Config: added 'scan_ssid' value '1'
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1457] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1459] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.1460] Config: added 'psk' value '<hidden>'
Oct 11 10:30:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/183
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.2372] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:30:20 IQ138000 NetworkManager[403]: <info>  [1760178620.2374] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:30:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:30:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:30:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:30:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:30:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:30:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:30:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:30:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:30:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:30:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:30:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:30:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:30:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:30:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:30:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:30:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:30:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:30:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:30:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:30:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:30:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:30:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:30:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:30:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:30:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:30:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:30:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:30:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:30:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:30:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:30:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:30:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:30:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:30:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:30:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:30:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:30:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:30:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:30:45 IQ138000 NetworkManager[403]: <warn>  [1760178645.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:30:45 IQ138000 NetworkManager[403]: <info>  [1760178645.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:30:45 IQ138000 NetworkManager[403]: <warn>  [1760178645.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:30:45 IQ138000 NetworkManager[403]: <info>  [1760178645.0271] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:30:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/183
Oct 11 10:30:45 IQ138000 NetworkManager[403]: <info>  [1760178645.0679] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:30:45 IQ138000 NetworkManager[403]: <info>  [1760178645.0681] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:30:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:30:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:50 IQ138000 NetworkManager[403]: <info>  [1760178650.8715] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:30:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L2, row count 7183, limit 7042
Oct 11 10:30:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L2, row count 7183, limit 7042
Oct 11 10:30:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L1, row count 7183, limit 7042
Oct 11 10:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:30:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:30:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:31:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:31:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:31:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:31:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:31:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:31:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:31:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:31:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:31:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:31:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:31:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:31:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:31:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:31:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:31:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:31:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:31:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:31:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:31:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:31:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:31:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:31:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:31:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:31:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:31:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:31:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:31:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:31:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:31:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:31:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:31:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:31:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:31:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:31:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:31:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:31:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:14 IQ138000 wb-watchdog[11926]: [INFO] Interval #255 started. Waiting up to 60 seconds for error...
Oct 11 10:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:31:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:31:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 10:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 5, row count 7183, limit 7042
Oct 11 10:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 2, row count 7183, limit 7042
Oct 11 10:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 6, row count 7183, limit 7042
Oct 11 10:31:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:31:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:31:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:31:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:31:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:31:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:31:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:31:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:31:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:31:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:31:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:31:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:31:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:31:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:31:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:31:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:31:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:31:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:31:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:31:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:31:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:31:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:31:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:31:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:31:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:31:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:31:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:31:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:31:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:31:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:31:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:31:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:31:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:31:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:31:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:31:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:31:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:31:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:31:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1310] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1319] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1326] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1380] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1404] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1406] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1499] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1518] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1535] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1538] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1539] Config: added 'scan_ssid' value '1'
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1540] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1542] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.1543] Config: added 'psk' value '<hidden>'
Oct 11 10:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/184
Oct 11 10:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.2336] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:31:46 IQ138000 NetworkManager[403]: <info>  [1760178706.2338] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:31:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:31:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:32:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:32:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:32:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:32:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:32:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:32:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:32:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:32:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:32:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:32:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:32:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:32:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:32:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:32:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:32:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:32:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:32:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:32:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:32:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:32:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:32:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:32:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:32:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:32:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:32:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:32:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:32:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:32:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:32:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:32:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:32:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:32:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:32:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:32:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:32:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:32:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:11 IQ138000 NetworkManager[403]: <warn>  [1760178731.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:32:11 IQ138000 NetworkManager[403]: <info>  [1760178731.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:32:11 IQ138000 NetworkManager[403]: <warn>  [1760178731.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:32:11 IQ138000 NetworkManager[403]: <info>  [1760178731.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:32:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/184
Oct 11 10:32:11 IQ138000 NetworkManager[403]: <info>  [1760178731.0689] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:32:11 IQ138000 NetworkManager[403]: <info>  [1760178731.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:14 IQ138000 wb-watchdog[12621]: [INFO] Interval #256 started. Waiting up to 60 seconds for error...
Oct 11 10:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:32:16 IQ138000 NetworkManager[403]: <info>  [1760178736.9119] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:32:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:32:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:32:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:32:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:32:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:32:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:32:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:32:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:32:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:32:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:32:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:32:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:32:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:32:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:32:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:32:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:32:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:32:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:32:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:32:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:32:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:32:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:32:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:32:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:32:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:32:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:32:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:32:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:32:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:32:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:32:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:32:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:32:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:32:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:32:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:32:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:32:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:32:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:32:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:32:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L1, row count 7183, limit 7042
Oct 11 10:32:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L2, row count 7183, limit 7042
Oct 11 10:32:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L1, row count 7183, limit 7042
Oct 11 10:32:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L3, row count 7183, limit 7042
Oct 11 10:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:33:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:33:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:33:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:33:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:33:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:33:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:33:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:33:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:33:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:33:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:33:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:33:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:33:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:33:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:33:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:33:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:33:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:33:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:33:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:33:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:33:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:33:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:33:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:33:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:33:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:33:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:33:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:33:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:33:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:33:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:33:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:33:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:33:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:33:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:33:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:33:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:33:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:33:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9334] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9368] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9374] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9459] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9485] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9486] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9580] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9602] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9619] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9622] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9623] Config: added 'scan_ssid' value '1'
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9624] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9626] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:33:11 IQ138000 NetworkManager[403]: <info>  [1760178791.9627] Config: added 'psk' value '<hidden>'
Oct 11 10:33:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/185
Oct 11 10:33:12 IQ138000 NetworkManager[403]: <info>  [1760178792.1495] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:33:12 IQ138000 NetworkManager[403]: <info>  [1760178792.1498] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:33:14 IQ138000 wb-watchdog[13228]: [INFO] Interval #257 started. Waiting up to 60 seconds for error...
Oct 11 10:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:33:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:33:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:33:37 IQ138000 NetworkManager[403]: <warn>  [1760178817.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:33:37 IQ138000 NetworkManager[403]: <info>  [1760178817.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:33:37 IQ138000 NetworkManager[403]: <warn>  [1760178817.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:33:37 IQ138000 NetworkManager[403]: <info>  [1760178817.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:33:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/185
Oct 11 10:33:37 IQ138000 NetworkManager[403]: <info>  [1760178817.0707] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:33:37 IQ138000 NetworkManager[403]: <info>  [1760178817.0709] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:33:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:33:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:33:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:33:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:33:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:33:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:33:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:33:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:33:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:33:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:33:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:33:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:33:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:33:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:33:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:33:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:33:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:33:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:33:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:33:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:33:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:33:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:33:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:33:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:33:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:33:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:33:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:33:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:33:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:33:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:33:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:33:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:33:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:33:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:33:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:33:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:33:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:33:42 IQ138000 NetworkManager[403]: <info>  [1760178822.6968] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:33:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:33:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:33:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:34:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:34:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:34:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:34:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:34:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:34:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:34:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:34:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:34:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:34:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:34:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:34:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:34:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:34:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:34:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:34:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:34:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:34:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:34:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:34:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:34:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:34:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:34:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:34:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:34:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:34:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:34:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:34:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:34:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:34:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:34:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:34:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:34:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:34:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:34:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:34:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:34:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:34:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:34:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:34:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:34:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12836 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:14 IQ138000 wb-watchdog[13933]: [INFO] Interval #258 started. Waiting up to 60 seconds for error...
Oct 11 10:34:15 IQ138000 npm[3801]: [2025-10-11 10:34:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.3,"last_seen":1760178855245,"linkquality":109,"power_outage_count":48745,"temperature":26.77,"voltage":3025}'
Oct 11 10:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:34:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:34:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:34:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:34:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8344] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8349] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8356] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8469] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8489] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8490] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8694] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8717] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8736] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8740] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8741] Config: added 'scan_ssid' value '1'
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8742] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8744] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.8744] Config: added 'psk' value '<hidden>'
Oct 11 10:34:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/186
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.9579] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:34:37 IQ138000 NetworkManager[403]: <info>  [1760178877.9581] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:34:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:34:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:34:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:34:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:34:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:34:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:34:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:34:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:34:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:34:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:34:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:34:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:34:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:34:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:34:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:34:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:34:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:34:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:34:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:34:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:34:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:34:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:34:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:34:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:34:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:34:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:34:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:34:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:34:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:34:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:34:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:34:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:34:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:34:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:34:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:34:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L1, row count 7183, limit 7042
Oct 11 10:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:35:01 IQ138000 CRON[14353]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:35:01 IQ138000 CRON[14363]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 10:35:01 IQ138000 CRON[14353]: pam_unix(cron:session): session closed for user root
Oct 11 10:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:03 IQ138000 NetworkManager[403]: <warn>  [1760178903.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:35:03 IQ138000 NetworkManager[403]: <info>  [1760178903.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:35:03 IQ138000 NetworkManager[403]: <warn>  [1760178903.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:35:03 IQ138000 NetworkManager[403]: <info>  [1760178903.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:35:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/186
Oct 11 10:35:03 IQ138000 NetworkManager[403]: <info>  [1760178903.0650] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:35:03 IQ138000 NetworkManager[403]: <info>  [1760178903.0652] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:35:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:35:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:35:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:35:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:35:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:35:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:35:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:35:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:35:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:35:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:35:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:35:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:35:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:35:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:35:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:35:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:35:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:35:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:35:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:35:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:35:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:35:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:35:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:35:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:35:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:35:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:35:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:35:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:35:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:35:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:35:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:35:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:35:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:35:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:35:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:35:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:35:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:35:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:35:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:35:09 IQ138000 NetworkManager[403]: <info>  [1760178909.6332] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 10:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:14 IQ138000 wb-watchdog[14550]: [INFO] Interval #259 started. Waiting up to 60 seconds for error...
Oct 11 10:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8724 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 1, row count 7183, limit 7042
Oct 11 10:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L3, row count 7183, limit 7042
Oct 11 10:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 4, row count 7183, limit 7042
Oct 11 10:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 3, row count 7183, limit 7042
Oct 11 10:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:35:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:35:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:35:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:35:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:35:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:35:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:35:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:35:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:35:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:35:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:35:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:35:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:35:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:35:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:35:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:35:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:35:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:35:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:35:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:35:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:35:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:35:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:35:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:35:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:35:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:35:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:35:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:35:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:35:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:35:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:35:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:35:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:35:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:35:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:35:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:35:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:35:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:35:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:35:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:35:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:35:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8741] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8746] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8751] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8828] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8859] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8861] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8946] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8974] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8994] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.8999] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.9000] Config: added 'scan_ssid' value '1'
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.9001] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.9003] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.9004] Config: added 'psk' value '<hidden>'
Oct 11 10:36:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/187
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.9794] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:36:04 IQ138000 NetworkManager[403]: <info>  [1760178964.9796] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:36:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:36:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:36:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:36:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:36:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:36:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:36:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:36:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:36:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:36:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:36:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:36:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:36:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:36:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:36:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:36:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:36:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:36:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:36:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:36:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:36:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:36:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:36:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:36:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:36:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:36:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:36:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:36:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:36:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:36:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:36:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:36:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:36:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:36:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:36:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:36:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:36:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:36:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:36:14 IQ138000 wb-watchdog[15262]: [INFO] Interval #260 started. Waiting up to 60 seconds for error...
Oct 11 10:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:36:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:36:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:36:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:36:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:36:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:30 IQ138000 NetworkManager[403]: <warn>  [1760178990.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:36:30 IQ138000 NetworkManager[403]: <info>  [1760178990.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:36:30 IQ138000 NetworkManager[403]: <warn>  [1760178990.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:36:30 IQ138000 NetworkManager[403]: <info>  [1760178990.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:36:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/187
Oct 11 10:36:30 IQ138000 NetworkManager[403]: <info>  [1760178990.0705] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:36:30 IQ138000 NetworkManager[403]: <info>  [1760178990.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:35 IQ138000 NetworkManager[403]: <info>  [1760178995.6421] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:36:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:36:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:36:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:36:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:36:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:36:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:36:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:36:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:36:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:36:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:36:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:36:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:36:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:36:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:36:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:36:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:36:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:36:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:36:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:36:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:36:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:36:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:36:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:36:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:36:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:36:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:36:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:36:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:36:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:36:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:36:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:36:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:36:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:36:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:36:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:36:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:36:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:36:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:36:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:37:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:37:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:37:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:37:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:37:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:37:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:37:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:37:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:37:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:37:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:37:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:37:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:37:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:37:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:37:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:37:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:37:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:37:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:37:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:37:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:37:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:37:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:37:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:37:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:37:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:37:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:37:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:37:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:37:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:37:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:37:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:37:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:37:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:37:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:37:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:37:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:37:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 npm[3801]: [2025-10-11 10:37:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":46.73,"last_seen":1760179034391,"linkquality":51,"power_outage_count":25795,"pressure":992.8,"temperature":22.78,"voltage":3005}'
Oct 11 10:37:14 IQ138000 npm[3801]: [2025-10-11 10:37:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":45.8,"last_seen":1760179034421,"linkquality":47,"power_outage_count":25795,"pressure":992.8,"temperature":22.78,"voltage":3005}'
Oct 11 10:37:14 IQ138000 npm[3801]: [2025-10-11 10:37:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":45.8,"last_seen":1760179034462,"linkquality":47,"power_outage_count":25795,"pressure":992.7,"temperature":22.78,"voltage":3005}'
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-watchdog[15872]: [INFO] Interval #261 started. Waiting up to 60 seconds for error...
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 10:37:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 10:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.7969] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.7974] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.7987] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8046] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8064] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8066] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8159] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8190] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8209] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8212] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8213] Config: added 'scan_ssid' value '1'
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8214] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8215] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8216] Config: added 'psk' value '<hidden>'
Oct 11 10:37:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/188
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8902] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:37:30 IQ138000 NetworkManager[403]: <info>  [1760179050.8904] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:37:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:37:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:37:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:37:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:37:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:37:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:37:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:37:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:37:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:37:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:37:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:37:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:37:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:37:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:37:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:37:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:37:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:37:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:37:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:37:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:37:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:37:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:37:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:37:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:37:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:37:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:37:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:37:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:37:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:37:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:37:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:37:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:37:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:37:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:37:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:37:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:37:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:37:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:37:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:37:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:37:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:56 IQ138000 NetworkManager[403]: <warn>  [1760179076.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:37:56 IQ138000 NetworkManager[403]: <info>  [1760179076.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:37:56 IQ138000 NetworkManager[403]: <warn>  [1760179076.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:37:56 IQ138000 NetworkManager[403]: <info>  [1760179076.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:37:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/188
Oct 11 10:37:56 IQ138000 NetworkManager[403]: <info>  [1760179076.0680] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:37:56 IQ138000 NetworkManager[403]: <info>  [1760179076.0682] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:38:01 IQ138000 CRON[16387]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:38:01 IQ138000 CRON[16391]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 10:38:02 IQ138000 NetworkManager[403]: <info>  [1760179082.5474] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:38:03 IQ138000 sSMTP[16410]: Unable to locate mail
Oct 11 10:38:03 IQ138000 cron[16410]: sendmail: Cannot open mail:25
Oct 11 10:38:03 IQ138000 sSMTP[16410]: Cannot open mail:25
Oct 11 10:38:03 IQ138000 CRON[16387]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 10:38:03 IQ138000 CRON[16387]: pam_unix(cron:session): session closed for user root
Oct 11 10:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:38:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:38:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:38:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:38:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:38:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:38:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:38:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:38:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:38:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:38:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:38:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:38:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:38:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:38:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:38:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:38:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:38:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:38:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:38:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:38:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:38:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:38:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:38:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:38:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:38:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:38:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:38:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:38:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:38:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:38:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:38:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:38:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:38:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:38:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:38:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:38:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:14 IQ138000 wb-watchdog[16587]: [INFO] Interval #262 started. Waiting up to 60 seconds for error...
Oct 11 10:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:38:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:38:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:38:30 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 10:38:30 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 11 10:38:30 IQ138000 systemd[1]: data-handler.service: Consumed 46.680s CPU time.
Oct 11 10:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:35 IQ138000 npm[3801]: [2025-10-11 10:38:35] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":45.15,"last_seen":1760179115529,"linkquality":69,"power_outage_count":25795,"pressure":992.7,"temperature":22.75,"voltage":2995}'
Oct 11 10:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:38:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:38:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:38:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:38:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:38:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:38:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:38:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:38:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:38:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:38:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:38:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:38:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:38:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:38:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:38:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:38:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:38:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:38:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:38:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:38:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:38:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:38:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:38:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:38:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:38:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:38:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:38:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:38:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:38:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:38:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:38:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:38:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:38:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:38:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:38:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:38:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:38:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L1, row count 7183, limit 7042
Oct 11 10:38:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L3, row count 7183, limit 7042
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.6967] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7000] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7008] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7126] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7157] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7171] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7326] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7375] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7403] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7416] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7418] Config: added 'scan_ssid' value '1'
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7419] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7420] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.7421] Config: added 'psk' value '<hidden>'
Oct 11 10:38:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/189
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.8091] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:38:57 IQ138000 NetworkManager[403]: <info>  [1760179137.8095] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:39:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:39:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:39:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:39:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:39:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:39:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:39:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:39:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:39:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:39:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:39:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:39:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:39:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:39:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:39:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:39:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:39:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:39:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:39:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:39:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:39:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:39:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:39:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:39:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:39:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:39:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:39:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:39:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:39:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:39:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:39:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:39:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:39:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:39:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:39:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:39:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:39:14 IQ138000 wb-watchdog[17198]: [INFO] Interval #263 started. Waiting up to 60 seconds for error...
Oct 11 10:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:39:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:39:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:23 IQ138000 NetworkManager[403]: <warn>  [1760179163.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:39:23 IQ138000 NetworkManager[403]: <info>  [1760179163.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:39:23 IQ138000 NetworkManager[403]: <warn>  [1760179163.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:39:23 IQ138000 NetworkManager[403]: <info>  [1760179163.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:39:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/189
Oct 11 10:39:23 IQ138000 NetworkManager[403]: <info>  [1760179163.0664] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:39:23 IQ138000 NetworkManager[403]: <info>  [1760179163.0666] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:39:29 IQ138000 NetworkManager[403]: <info>  [1760179169.4678] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:30 IQ138000 systemd[1]: data-handler.service: Scheduled restart job, restart counter is at 2.
Oct 11 10:39:30 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 11 10:39:30 IQ138000 systemd[1]: data-handler.service: Consumed 46.680s CPU time.
Oct 11 10:39:30 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 10:39:30 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 10:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:39:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:39:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:39:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:39:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:39:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:39:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:39:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:39:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:39:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:39:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:39:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:39:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:39:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:39:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:39:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:39:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:39:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:39:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:39:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:39:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:39:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:39:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:39:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:39:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:39:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:39:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:39:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:39:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:39:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:39:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:39:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:39:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:39:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:39:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:39:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:39:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:39:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:39:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:40:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:40:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:40:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:40:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:40:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:40:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:40:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:40:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:40:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:40:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:40:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:40:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:40:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:40:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:40:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:40:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:40:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:40:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:40:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:40:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:40:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:40:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:40:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:40:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:40:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:40:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:40:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:40:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:40:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:40:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:40:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:40:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:40:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:40:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:40:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:40:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:40:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:40:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:14 IQ138000 wb-watchdog[17910]: [INFO] Interval #264 started. Waiting up to 60 seconds for error...
Oct 11 10:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.5926] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.5930] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.5939] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.5989] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6007] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6009] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6093] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6120] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6142] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6145] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6147] Config: added 'scan_ssid' value '1'
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6148] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6149] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6150] Config: added 'psk' value '<hidden>'
Oct 11 10:40:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/190
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6896] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:40:24 IQ138000 NetworkManager[403]: <info>  [1760179224.6899] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:40:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:40:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:40:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:40:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:40:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:40:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:40:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:40:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:40:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:40:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:40:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:40:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:40:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:40:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:40:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:40:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:40:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:40:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:40:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:40:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:40:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:40:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:40:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:40:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:40:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:40:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:40:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:40:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:40:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:40:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:40:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:40:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:40:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:40:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:40:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:40:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:40:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:50 IQ138000 NetworkManager[403]: <warn>  [1760179250.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:40:50 IQ138000 NetworkManager[403]: <info>  [1760179250.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:40:50 IQ138000 NetworkManager[403]: <warn>  [1760179250.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:40:50 IQ138000 NetworkManager[403]: <info>  [1760179250.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:40:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:40:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/190
Oct 11 10:40:50 IQ138000 NetworkManager[403]: <info>  [1760179250.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:40:50 IQ138000 NetworkManager[403]: <info>  [1760179250.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:40:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:40:56 IQ138000 NetworkManager[403]: <info>  [1760179256.3516] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:40:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L3, row count 7183, limit 7042
Oct 11 10:40:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L1, row count 7183, limit 7042
Oct 11 10:40:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L2, row count 7183, limit 7042
Oct 11 10:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:41:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:41:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:41:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:41:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:41:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:41:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:41:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:41:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:41:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:41:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:41:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:41:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:41:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:41:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:41:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:41:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:41:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:41:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:41:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:41:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:41:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:41:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:41:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:41:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:41:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:41:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:41:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:41:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:41:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:41:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:41:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:41:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:41:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:41:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:41:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:41:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:14 IQ138000 wb-watchdog[18520]: [INFO] Interval #265 started. Waiting up to 60 seconds for error...
Oct 11 10:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:41:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:41:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:41:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:41:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:41:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:41:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:41:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:41:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:41:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:41:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:41:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:41:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:41:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:41:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:41:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:41:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:41:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:41:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:41:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:41:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:41:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:41:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:41:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:41:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:41:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:41:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:41:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:41:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:41:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:41:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:41:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:41:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:41:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:41:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:41:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:41:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:41:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:41:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:41:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:41:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:41:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:41:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:41:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:41:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:41:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3658] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3663] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3684] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3769] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3816] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3818] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3937] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.3981] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.4049] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.4053] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.4055] Config: added 'scan_ssid' value '1'
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.4056] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.4057] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:41:51 IQ138000 NetworkManager[403]: <info>  [1760179311.4058] Config: added 'psk' value '<hidden>'
Oct 11 10:41:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/191
Oct 11 10:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:41:54 IQ138000 NetworkManager[403]: <info>  [1760179314.5089] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:41:54 IQ138000 NetworkManager[403]: <info>  [1760179314.5091] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:42:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:42:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:42:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:42:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:42:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:42:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:42:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:42:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:42:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:42:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:42:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:42:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:42:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:42:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:42:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:42:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:42:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:42:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:42:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:42:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:42:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:42:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:42:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:42:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:42:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:42:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:42:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:42:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:42:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:42:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:42:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:42:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:42:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:42:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:42:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:42:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:42:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:42:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:42:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:42:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:42:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:42:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:42:14 IQ138000 wb-watchdog[19224]: [INFO] Interval #266 started. Waiting up to 60 seconds for error...
Oct 11 10:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12836 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:42:17 IQ138000 NetworkManager[403]: <warn>  [1760179337.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:42:17 IQ138000 NetworkManager[403]: <info>  [1760179337.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:42:17 IQ138000 NetworkManager[403]: <warn>  [1760179337.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:42:17 IQ138000 NetworkManager[403]: <info>  [1760179337.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:42:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/191
Oct 11 10:42:17 IQ138000 NetworkManager[403]: <info>  [1760179337.0704] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:42:17 IQ138000 NetworkManager[403]: <info>  [1760179337.0705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:42:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:42:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:42:23 IQ138000 NetworkManager[403]: <info>  [1760179343.1199] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:42:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:42:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:42:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:42:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:42:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:42:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:42:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:42:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:42:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:42:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:42:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:42:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:42:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:42:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:42:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:42:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:42:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:42:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:42:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:42:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:42:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:42:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:42:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:42:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:42:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:42:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:42:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:42:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:42:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:42:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:42:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:42:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:42:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:42:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:42:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:42:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:42:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:42:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L1, row count 7183, limit 7042
Oct 11 10:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:43:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:43:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:43:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:43:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:43:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:43:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:43:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:43:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:43:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:43:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:43:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:43:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:43:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:43:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:43:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:43:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:43:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:43:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:43:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:43:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:43:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:43:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:43:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:43:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:43:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:43:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:43:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:43:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:43:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:43:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:43:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:43:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:43:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:43:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:43:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:14 IQ138000 wb-watchdog[19842]: [INFO] Interval #267 started. Waiting up to 60 seconds for error...
Oct 11 10:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2576] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2581] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2586] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2641] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2662] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2663] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2753] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2771] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2787] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2790] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2791] Config: added 'scan_ssid' value '1'
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2792] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2793] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.2794] Config: added 'psk' value '<hidden>'
Oct 11 10:43:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/192
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.3571] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:43:18 IQ138000 NetworkManager[403]: <info>  [1760179398.3573] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:43:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:43:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8732 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:43:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:43:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:43:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:43:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:43:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:43:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:43:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:43:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:43:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:43:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:43:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:43:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:43:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:43:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:43:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:43:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:43:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:43:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:43:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:43:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:43:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:43:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:43:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:43:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:43:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:43:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:43:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:43:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:43:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:43:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:43:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:43:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:43:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:43:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:43:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:43:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:44 IQ138000 NetworkManager[403]: <warn>  [1760179424.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:43:44 IQ138000 NetworkManager[403]: <info>  [1760179424.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:43:44 IQ138000 NetworkManager[403]: <warn>  [1760179424.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:43:44 IQ138000 NetworkManager[403]: <info>  [1760179424.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:43:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:43:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/192
Oct 11 10:43:44 IQ138000 NetworkManager[403]: <info>  [1760179424.0746] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:43:44 IQ138000 NetworkManager[403]: <info>  [1760179424.0749] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:50 IQ138000 NetworkManager[403]: <info>  [1760179430.1085] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:44:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:44:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:44:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:44:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:44:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:44:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:44:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:44:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:44:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:44:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:44:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:44:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:44:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:44:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:44:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:44:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:44:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:44:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:44:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:44:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:44:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:44:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:44:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:44:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:44:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:44:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:44:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:44:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:44:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:44:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:44:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:44:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:44:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:44:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:44:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:44:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:44:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:44:14 IQ138000 wb-watchdog[20531]: [INFO] Interval #268 started. Waiting up to 60 seconds for error...
Oct 11 10:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:44:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:44:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:44:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:44:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:44:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:44:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:44:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:44:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:44:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:44:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:44:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:44:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:44:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:44:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:44:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:44:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:44:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:44:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:44:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:44:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:44:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:44:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:44:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:44:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:44:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:44:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:44:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:44:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:44:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:44:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:44:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:44:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:44:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:44:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:44:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:44:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:44:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:44:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:44:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:44:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:44:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:44:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:44:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:44:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:44:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3124] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3135] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3141] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3194] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3218] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3220] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3326] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3345] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3363] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3366] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3367] Config: added 'scan_ssid' value '1'
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3368] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3369] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:44:45 IQ138000 NetworkManager[403]: <info>  [1760179485.3370] Config: added 'psk' value '<hidden>'
Oct 11 10:44:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/193
Oct 11 10:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:49 IQ138000 NetworkManager[403]: <info>  [1760179489.4230] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:44:49 IQ138000 NetworkManager[403]: <info>  [1760179489.4233] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:44:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L3, row count 7183, limit 7042
Oct 11 10:44:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L2, row count 7183, limit 7042
Oct 11 10:44:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L1, row count 7183, limit 7042
Oct 11 10:44:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L3, row count 7183, limit 7042
Oct 11 10:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:44:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:44:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:45:01 IQ138000 CRON[20956]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:45:01 IQ138000 CRON[20962]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 10:45:01 IQ138000 CRON[20956]: pam_unix(cron:session): session closed for user root
Oct 11 10:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:11 IQ138000 NetworkManager[403]: <warn>  [1760179511.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:45:11 IQ138000 NetworkManager[403]: <info>  [1760179511.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:45:11 IQ138000 NetworkManager[403]: <warn>  [1760179511.0274] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:45:11 IQ138000 NetworkManager[403]: <info>  [1760179511.0291] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:45:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/193
Oct 11 10:45:11 IQ138000 NetworkManager[403]: <info>  [1760179511.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:45:11 IQ138000 NetworkManager[403]: <info>  [1760179511.0705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:45:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:45:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:45:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:45:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:45:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:45:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:45:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:45:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:45:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:45:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:45:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:45:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:45:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:45:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:45:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:45:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:45:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:45:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:45:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:45:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:45:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:45:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:45:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:45:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:45:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:45:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:45:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:45:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:45:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:45:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:45:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:45:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:45:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:45:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:14 IQ138000 wb-watchdog[21162]: [INFO] Interval #269 started. Waiting up to 60 seconds for error...
Oct 11 10:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:17 IQ138000 NetworkManager[403]: <info>  [1760179517.0744] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:45:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:45:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:45:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:45:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:45:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:45:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:45:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:45:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:45:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:45:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:45:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:45:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:45:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:45:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:45:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:45:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:45:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:45:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:45:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:45:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:45:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:45:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:45:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:45:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:45:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:45:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:45:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:45:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:45:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:45:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:45:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:45:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:45:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:45:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:45:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:45:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:45:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:45:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:45:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:45:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:45:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:46:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:46:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:46:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:46:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3248] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3253] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3258] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3311] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3339] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3341] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3526] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3568] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3605] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3615] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3617] Config: added 'scan_ssid' value '1'
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3618] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3619] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.3621] Config: added 'psk' value '<hidden>'
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:46:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/194
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.4812] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:46:12 IQ138000 NetworkManager[403]: <info>  [1760179572.4814] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:46:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:46:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:46:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:46:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:46:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:46:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:46:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:46:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:46:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:46:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:46:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:46:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:46:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:46:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:46:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:46:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:46:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:46:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:46:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:46:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:46:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:46:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:46:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:46:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:46:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:46:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:46:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:46:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:46:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:46:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:46:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:46:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:46:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:46:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:46:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:46:14 IQ138000 wb-watchdog[21860]: [INFO] Interval #270 started. Waiting up to 60 seconds for error...
Oct 11 10:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:46:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:46:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:38 IQ138000 NetworkManager[403]: <warn>  [1760179598.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:46:38 IQ138000 NetworkManager[403]: <info>  [1760179598.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:46:38 IQ138000 NetworkManager[403]: <warn>  [1760179598.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:46:38 IQ138000 NetworkManager[403]: <info>  [1760179598.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:46:38 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:46:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/194
Oct 11 10:46:38 IQ138000 NetworkManager[403]: <info>  [1760179598.0904] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:46:38 IQ138000 NetworkManager[403]: <info>  [1760179598.0940] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:38 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:46:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:46:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:46:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:46:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:46:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:46:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:46:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:46:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:46:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:46:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:46:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:46:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:46:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:46:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:46:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:46:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:46:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:46:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:46:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:46:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:46:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:46:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:46:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:46:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:46:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:46:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:46:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:46:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:46:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:46:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:46:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:46:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:46:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:46:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:46:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:46:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:46:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:46:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:46:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:44 IQ138000 NetworkManager[403]: <info>  [1760179604.1476] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:47:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:47:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:47:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:47:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:47:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:47:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:47:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:47:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:47:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:47:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:47:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:47:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:47:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:47:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:47:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:47:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:47:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:47:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:47:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:47:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:47:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:47:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:47:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:47:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:47:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:47:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:47:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:47:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:47:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:47:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:47:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:47:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:47:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:47:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:47:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:47:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:47:14 IQ138000 wb-watchdog[22467]: [INFO] Interval #271 started. Waiting up to 60 seconds for error...
Oct 11 10:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 10:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:47:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:47:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 10:47:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 10:47:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 10:47:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 10:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1418] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1423] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1429] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1485] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1505] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1507] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1666] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1711] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1732] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1736] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1737] Config: added 'scan_ssid' value '1'
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1738] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1740] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:47:39 IQ138000 NetworkManager[403]: <info>  [1760179659.1741] Config: added 'psk' value '<hidden>'
Oct 11 10:47:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/195
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:43 IQ138000 NetworkManager[403]: <info>  [1760179663.2689] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:47:43 IQ138000 NetworkManager[403]: <info>  [1760179663.2697] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:47:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:47:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:47:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:47:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:47:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:47:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:47:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:47:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:47:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:47:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:47:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:47:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:47:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:47:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:47:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:47:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:47:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:47:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:47:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:47:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:47:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:47:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:47:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:47:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:47:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:47:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:47:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:47:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:47:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:47:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:47:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:47:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:47:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:47:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:47:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:47:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:47:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:47:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:47:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:04 IQ138000 NetworkManager[403]: <warn>  [1760179684.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:48:04 IQ138000 NetworkManager[403]: <info>  [1760179684.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:48:04 IQ138000 NetworkManager[403]: <warn>  [1760179684.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:48:04 IQ138000 NetworkManager[403]: <info>  [1760179684.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:48:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/195
Oct 11 10:48:04 IQ138000 NetworkManager[403]: <info>  [1760179684.0725] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:48:04 IQ138000 NetworkManager[403]: <info>  [1760179684.0727] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:09 IQ138000 NetworkManager[403]: <info>  [1760179689.8881] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:48:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:48:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:48:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:48:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:48:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:48:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:48:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:48:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:48:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:48:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:48:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:48:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:48:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:48:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:48:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:48:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:48:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:48:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:48:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:48:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:48:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:48:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:48:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:48:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:48:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:48:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:48:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:48:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:48:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:48:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:48:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:48:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:48:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:48:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:48:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:48:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:48:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:48:14 IQ138000 wb-watchdog[23186]: [INFO] Interval #272 started. Waiting up to 60 seconds for error...
Oct 11 10:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:48:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:48:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:48:30 IQ138000 lsyncd[6566]: 10:48:30 Normal: Calling rsync with filter-list of new/modified files/dirs
Oct 11 10:48:30 IQ138000 lsyncd[6566]: /data-handler/20251011-080426000.txt
Oct 11 10:48:30 IQ138000 lsyncd[6566]: /data-handler/
Oct 11 10:48:30 IQ138000 lsyncd[6566]: /
Oct 11 10:48:30 IQ138000 lsyncd[6566]: /data-handler/20251011-103930000.txt
Oct 11 10:48:30 IQ138000 lsyncd[6566]: /data-handler/20251011-061751000.txt
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:31 IQ138000 lsyncd[6566]: 10:48:31 Normal: Finished (list): 0
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:48:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:48:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:48:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:48:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:48:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:48:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:48:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:48:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:48:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:48:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:48:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:48:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:48:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:48:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:48:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:48:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:48:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:48:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:48:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:48:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:48:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:48:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:48:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:48:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:48:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:48:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:48:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:48:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:48:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:48:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:48:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:48:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:48:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:48:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:48:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:48:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:48:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:49:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:49:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1678] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1703] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1709] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1768] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1784] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1786] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1886] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1906] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1924] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1927] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1928] Config: added 'scan_ssid' value '1'
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1929] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1931] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.1932] Config: added 'psk' value '<hidden>'
Oct 11 10:49:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/196
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.2658] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:49:05 IQ138000 NetworkManager[403]: <info>  [1760179745.2660] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:49:14 IQ138000 wb-watchdog[23788]: [INFO] Interval #273 started. Waiting up to 60 seconds for error...
Oct 11 10:49:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:49:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:49:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:49:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:49:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:49:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:49:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:49:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:49:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:49:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:49:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:49:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:49:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:49:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:49:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:49:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:49:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:49:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:49:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:49:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:49:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:49:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:49:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:49:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:49:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:49:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:49:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:49:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:49:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:49:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:49:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:49:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:49:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:49:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:49:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:49:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:49:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:49:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:49:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:49:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:30 IQ138000 NetworkManager[403]: <warn>  [1760179770.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:49:30 IQ138000 NetworkManager[403]: <info>  [1760179770.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:49:30 IQ138000 NetworkManager[403]: <warn>  [1760179770.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:49:30 IQ138000 NetworkManager[403]: <info>  [1760179770.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:49:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/196
Oct 11 10:49:30 IQ138000 NetworkManager[403]: <info>  [1760179770.0697] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:49:30 IQ138000 NetworkManager[403]: <info>  [1760179770.0700] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:49:35 IQ138000 NetworkManager[403]: <info>  [1760179775.8759] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L1, row count 7183, limit 7042
Oct 11 10:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 10:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:49:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:49:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:49:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:49:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:49:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:49:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:49:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:49:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:49:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:49:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:49:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:49:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:49:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:49:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:49:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:49:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:49:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:49:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:49:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:49:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:49:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:49:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:49:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:49:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:49:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:49:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:49:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:49:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:49:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:49:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:49:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:49:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:49:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:49:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:49:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:49:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:49:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:49:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:04 IQ138000 npm[3801]: [2025-10-11 10:50:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.3,"last_seen":1760179804510,"linkquality":105,"power_outage_count":48745,"temperature":27.26,"voltage":3025}'
Oct 11 10:50:04 IQ138000 npm[3801]: [2025-10-11 10:50:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.73,"last_seen":1760179804531,"linkquality":102,"power_outage_count":48745,"temperature":27.26,"voltage":3025}'
Oct 11 10:50:04 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760179984587,"cmd_timestamp_ms":1760179804587,"source":"regulation"}
Oct 11 10:50:04 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760179984587,"cmd_timestamp_ms":1760179804587,"source":"regulation"}
Oct 11 10:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:05 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 10:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:10 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:50:15 IQ138000 wb-watchdog[24501]: [INFO] Interval #274 started. Waiting up to 60 seconds for error...
Oct 11 10:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8720 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:50:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:50:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:50:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:50:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:50:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:50:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:50:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:50:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:50:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:50:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:50:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:50:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:50:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:50:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:50:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:50:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:50:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:50:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:50:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:50:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:50:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:50:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:50:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:50:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:50:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:50:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:50:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:50:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:50:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:50:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:50:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:50:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:50:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:50:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:50:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10000 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:50:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:50:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5394 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9640] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9659] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9667] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9729] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9754] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9756] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9866] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9908] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9942] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9945] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9946] Config: added 'scan_ssid' value '1'
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9947] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9949] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:50:30 IQ138000 NetworkManager[403]: <info>  [1760179830.9949] Config: added 'psk' value '<hidden>'
Oct 11 10:50:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/197
Oct 11 10:50:31 IQ138000 NetworkManager[403]: <info>  [1760179831.0681] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:50:31 IQ138000 NetworkManager[403]: <info>  [1760179831.0686] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:50:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:50:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:50:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:50:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:50:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:50:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:50:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:50:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:50:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:50:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:50:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:50:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:50:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:50:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:50:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:50:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:50:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:50:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:50:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:50:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:50:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:50:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:50:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:50:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:50:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:50:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:50:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:50:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:50:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:50:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:50:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:50:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:50:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:50:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:50:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:50:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:50:56 IQ138000 NetworkManager[403]: <warn>  [1760179856.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:50:56 IQ138000 NetworkManager[403]: <info>  [1760179856.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:50:56 IQ138000 NetworkManager[403]: <warn>  [1760179856.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:50:56 IQ138000 NetworkManager[403]: <info>  [1760179856.0277] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:50:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/197
Oct 11 10:50:56 IQ138000 NetworkManager[403]: <info>  [1760179856.0677] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:50:56 IQ138000 NetworkManager[403]: <info>  [1760179856.0692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:50:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_38/External Sensor 1, row count 7183, limit 7042
Oct 11 10:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:01 IQ138000 NetworkManager[403]: <info>  [1760179861.7551] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:51:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:51:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:09 IQ138000 npm[3801]: [2025-10-11 10:51:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":41.84,"last_seen":1760179869837,"linkquality":18,"power_outage_count":35250,"temperature":24.19,"voltage":3075}'
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:51:14 IQ138000 wb-watchdog[25101]: [INFO] Interval #275 started. Waiting up to 60 seconds for error...
Oct 11 10:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:51:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:51:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:51:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:51:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:51:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:51:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:51:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:51:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:51:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:51:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:51:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:51:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:51:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:51:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:51:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:51:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:51:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:51:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:51:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:51:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:51:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:51:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:51:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:51:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:51:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:51:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:51:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:51:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:51:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:51:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:51:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:51:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:51:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:51:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:51:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:51:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:51:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:51:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:51:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:51:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:51:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L2, row count 7183, limit 7042
Oct 11 10:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:51:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:51:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:51:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:51:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:51:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:51:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:51:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:51:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:51:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:51:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:51:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:51:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:51:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:51:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:51:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:51:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:51:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:51:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:51:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:51:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:51:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:51:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:51:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:51:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:51:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:51:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:51:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:51:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:51:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:51:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:51:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:51:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:51:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:51:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:51:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:51:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:51:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:51:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:51:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:51:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:51:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:51:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8005] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8010] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8030] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8108] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8149] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8151] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8243] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8267] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8290] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8296] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8297] Config: added 'scan_ssid' value '1'
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8299] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8300] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8301] Config: added 'psk' value '<hidden>'
Oct 11 10:51:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/198
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8978] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:51:56 IQ138000 NetworkManager[403]: <info>  [1760179916.8981] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:52:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:52:14 IQ138000 wb-watchdog[25798]: [INFO] Interval #276 started. Waiting up to 60 seconds for error...
Oct 11 10:52:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:52:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:52:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:52:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:52:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:52:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:52:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:52:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:52:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:52:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:52:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:52:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:52:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:52:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:52:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:52:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:52:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:52:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:52:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:52:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:52:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:52:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:52:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:52:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:52:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:52:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:52:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:52:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:52:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:52:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:52:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:52:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:52:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:52:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:52:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:52:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:52:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:22 IQ138000 NetworkManager[403]: <warn>  [1760179942.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:52:22 IQ138000 NetworkManager[403]: <info>  [1760179942.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:52:22 IQ138000 NetworkManager[403]: <warn>  [1760179942.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:52:22 IQ138000 NetworkManager[403]: <info>  [1760179942.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:52:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/198
Oct 11 10:52:22 IQ138000 NetworkManager[403]: <info>  [1760179942.0681] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:52:22 IQ138000 NetworkManager[403]: <info>  [1760179942.0683] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:52:28 IQ138000 NetworkManager[403]: <info>  [1760179948.5316] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 9984 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:52:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:52:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:52:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:52:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:52:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:52:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:52:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:52:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:52:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:52:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:52:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:52:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:52:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:52:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:52:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:52:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:52:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:52:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:52:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:52:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:52:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:52:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:52:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:52:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:52:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:52:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:52:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:52:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:52:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:52:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:52:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:52:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:52:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:52:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:52:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:52:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:52:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L2, row count 7183, limit 7042
Oct 11 10:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:53:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:53:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:53:14 IQ138000 wb-watchdog[26422]: [INFO] Interval #277 started. Waiting up to 60 seconds for error...
Oct 11 10:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:53:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:53:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:53:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:53:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:53:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:53:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:53:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:53:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:53:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:53:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:53:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:53:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:53:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:53:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:53:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:53:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:53:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:53:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:53:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:53:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:53:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:53:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:53:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:53:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:53:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:53:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:53:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:53:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:53:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:53:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:53:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:53:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:53:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:53:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:53:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:53:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:53:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:53:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:53:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.6819] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.6831] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.6838] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.6934] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.6952] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.6954] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7043] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7064] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7081] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7085] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7086] Config: added 'scan_ssid' value '1'
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7087] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7088] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7089] Config: added 'psk' value '<hidden>'
Oct 11 10:53:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/199
Oct 11 10:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7965] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:53:23 IQ138000 NetworkManager[403]: <info>  [1760180003.7967] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:53:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L3, row count 7183, limit 7042
Oct 11 10:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:53:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:53:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:53:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:53:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:53:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:53:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:53:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:53:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:53:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:53:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:53:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:53:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:53:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:53:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:53:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:53:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:53:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:53:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:53:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:53:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:53:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:53:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:53:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:53:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:53:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:53:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:53:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:53:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:53:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:53:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:53:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:53:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:53:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:53:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:53:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:53:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:53:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:49 IQ138000 NetworkManager[403]: <warn>  [1760180029.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:53:49 IQ138000 NetworkManager[403]: <info>  [1760180029.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:53:49 IQ138000 NetworkManager[403]: <warn>  [1760180029.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:53:49 IQ138000 NetworkManager[403]: <info>  [1760180029.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:53:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/199
Oct 11 10:53:49 IQ138000 NetworkManager[403]: <info>  [1760180029.0741] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:53:49 IQ138000 NetworkManager[403]: <info>  [1760180029.0743] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:54 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:53:55 IQ138000 NetworkManager[403]: <info>  [1760180035.4176] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:00 IQ138000 npm[3801]: [2025-10-11 10:54:00] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.73,"last_seen":1760180040609,"linkquality":76,"power_outage_count":48745,"temperature":26.75,"voltage":3025}'
Oct 11 10:54:00 IQ138000 npm[3801]: [2025-10-11 10:54:00] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":33.58,"last_seen":1760180040630,"linkquality":83,"power_outage_count":48745,"temperature":26.75,"voltage":3025}'
Oct 11 10:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:54:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:54:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:54:14 IQ138000 wb-watchdog[27128]: [INFO] Interval #278 started. Waiting up to 60 seconds for error...
Oct 11 10:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:54:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:54:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:54:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:54:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:54:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:54:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:54:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:54:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:54:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:54:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:54:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:54:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:54:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:54:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:54:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:54:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:54:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:54:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:54:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:54:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:54:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:54:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:54:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:54:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:54:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:54:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:54:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:54:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:54:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:54:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:54:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:54:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:54:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:54:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:54:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:54:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:54:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:54:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:54:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:54:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:54:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:54:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:54:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:54:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:54:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:54:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:54:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:54:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:54:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:54:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:54:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:54:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:54:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:54:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:54:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:54:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:54:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:54:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:54:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:54:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:54:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:54:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:54:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:54:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:54:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:54:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:54:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:54:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:54:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:54:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:54:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:54:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:54:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:54:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:54:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6194] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6202] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6208] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6257] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6274] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6276] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6415] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6433] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6449] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6452] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6453] Config: added 'scan_ssid' value '1'
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6454] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6455] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:54:50 IQ138000 NetworkManager[403]: <info>  [1760180090.6455] Config: added 'psk' value '<hidden>'
Oct 11 10:54:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/200
Oct 11 10:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:53 IQ138000 NetworkManager[403]: <info>  [1760180093.7278] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:54:53 IQ138000 NetworkManager[403]: <info>  [1760180093.7281] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:55:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:55:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:55:01 IQ138000 CRON[27553]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 10:55:01 IQ138000 CRON[27559]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 10:55:01 IQ138000 CRON[27553]: pam_unix(cron:session): session closed for user root
Oct 11 10:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:14 IQ138000 wb-watchdog[27744]: [INFO] Interval #279 started. Waiting up to 60 seconds for error...
Oct 11 10:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 10:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:55:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:55:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:55:16 IQ138000 NetworkManager[403]: <warn>  [1760180116.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:55:16 IQ138000 NetworkManager[403]: <info>  [1760180116.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:55:16 IQ138000 NetworkManager[403]: <warn>  [1760180116.0258] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:55:16 IQ138000 NetworkManager[403]: <info>  [1760180116.0274] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:55:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/200
Oct 11 10:55:16 IQ138000 NetworkManager[403]: <info>  [1760180116.0722] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:55:16 IQ138000 NetworkManager[403]: <info>  [1760180116.0724] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:55:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:55:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:55:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:55:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:55:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:55:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:55:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:55:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:55:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:55:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:55:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:55:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:55:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:55:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:55:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:55:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:55:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:55:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:55:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:55:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:55:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:55:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:55:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:55:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:55:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:55:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:55:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:55:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:55:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:55:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:55:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:55:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:55:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:55:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:55:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:55:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:55:22 IQ138000 NetworkManager[403]: <info>  [1760180122.3851] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:55:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:55:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:55:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:55:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:55:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:55:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:55:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:55:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:55:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:55:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:55:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:55:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:55:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:55:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:55:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:55:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:55:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:55:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:55:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:55:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:55:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:55:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:55:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:55:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:55:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:55:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:55:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:55:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:55:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:55:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:55:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:55:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:55:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:55:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:55:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:55:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:55:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:55:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10000 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:06 IQ138000 npm[3801]: [2025-10-11 10:56:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":33.58,"last_seen":1760180166307,"linkquality":91,"power_outage_count":48745,"temperature":26.53,"voltage":3025}'
Oct 11 10:56:06 IQ138000 npm[3801]: [2025-10-11 10:56:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.68,"last_seen":1760180166321,"linkquality":94,"power_outage_count":48745,"temperature":26.53,"voltage":3025}'
Oct 11 10:56:06 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760180346409,"cmd_timestamp_ms":1760180166409,"source":"regulation"}
Oct 11 10:56:06 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760180346409,"cmd_timestamp_ms":1760180166409,"source":"regulation"}
Oct 11 10:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: request timed out
Oct 11 10:56:14 IQ138000 wb-watchdog[28447]: [INFO] Interval #280 started. Waiting up to 60 seconds for error...
Oct 11 10:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3650] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3673] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3681] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3740] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3762] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3763] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3880] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3908] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3932] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3941] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3942] Config: added 'scan_ssid' value '1'
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3943] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3944] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.3945] Config: added 'psk' value '<hidden>'
Oct 11 10:56:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/201
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.4736] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:56:17 IQ138000 NetworkManager[403]: <info>  [1760180177.4738] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:56:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:56:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:56:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:56:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:56:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:56:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:56:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:56:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:56:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:56:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:56:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:56:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:56:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:56:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:56:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:56:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:56:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:56:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:56:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:56:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:56:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:56:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:56:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:56:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:56:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:56:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:56:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:56:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:56:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:56:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:56:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:56:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:56:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:56:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:56:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:56:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:56:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:56:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:56:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:56:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:56:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:43 IQ138000 NetworkManager[403]: <warn>  [1760180203.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:56:43 IQ138000 NetworkManager[403]: <info>  [1760180203.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:56:43 IQ138000 NetworkManager[403]: <warn>  [1760180203.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:56:43 IQ138000 NetworkManager[403]: <info>  [1760180203.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:56:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:56:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/201
Oct 11 10:56:43 IQ138000 NetworkManager[403]: <info>  [1760180203.0642] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:56:43 IQ138000 NetworkManager[403]: <info>  [1760180203.0644] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:43 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 10:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:56:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:56:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:56:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:56:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:56:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:56:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:56:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:56:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:56:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:56:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:56:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:56:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:56:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:56:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:56:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:56:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:56:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:56:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:56:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:56:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:56:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:56:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:56:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:56:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:56:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:56:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:56:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:56:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:56:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:56:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:56:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:56:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:56:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:56:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:56:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:56:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:49 IQ138000 NetworkManager[403]: <info>  [1760180209.1140] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 10:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:56:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L3, row count 7183, limit 7042
Oct 11 10:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:14 IQ138000 wb-watchdog[29054]: [INFO] Interval #281 started. Waiting up to 60 seconds for error...
Oct 11 10:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:57:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:57:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:57:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:57:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:57:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:57:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:57:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:57:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:57:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:57:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:57:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:57:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:57:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:57:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:57:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:57:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:57:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:57:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:57:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:57:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:57:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:57:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:57:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:57:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:57:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:57:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:57:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:57:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:57:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:57:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:57:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:57:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:57:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:57:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:57:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:57:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:57:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:57:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:57:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:57:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L2, row count 7183, limit 7042
Oct 11 10:57:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L3, row count 7183, limit 7042
Oct 11 10:57:37 IQ138000 npm[3801]: [2025-10-11 10:57:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":45.15,"last_seen":1760180257608,"linkquality":32,"power_outage_count":25795,"pressure":992.7,"temperature":23.29,"voltage":2995}'
Oct 11 10:57:37 IQ138000 npm[3801]: [2025-10-11 10:57:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":45.08,"last_seen":1760180257631,"linkquality":36,"power_outage_count":25795,"pressure":992.7,"temperature":23.29,"voltage":2995}'
Oct 11 10:57:37 IQ138000 npm[3801]: [2025-10-11 10:57:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":45.08,"last_seen":1760180257631,"linkquality":36,"power_outage_count":25795,"pressure":992.5,"temperature":23.29,"voltage":2995}'
Oct 11 10:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:57:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:57:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3206] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3212] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3217] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3270] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3287] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3289] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3368] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3388] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3418] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3421] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3422] Config: added 'scan_ssid' value '1'
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3423] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3424] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:57:44 IQ138000 NetworkManager[403]: <info>  [1760180264.3425] Config: added 'psk' value '<hidden>'
Oct 11 10:57:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/202
Oct 11 10:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:47 IQ138000 NetworkManager[403]: <info>  [1760180267.4230] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:57:47 IQ138000 NetworkManager[403]: <info>  [1760180267.4232] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:57:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:57:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:57:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:57:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:57:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:57:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:57:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:57:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:57:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:57:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:57:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:57:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:57:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:57:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:57:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:57:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:57:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:57:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:57:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:57:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:57:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:57:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:57:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:57:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:57:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:57:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:57:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:57:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:57:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:57:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:57:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:57:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:57:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:57:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:57:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:10 IQ138000 NetworkManager[403]: <warn>  [1760180290.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:58:10 IQ138000 NetworkManager[403]: <info>  [1760180290.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:58:10 IQ138000 NetworkManager[403]: <warn>  [1760180290.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:58:10 IQ138000 NetworkManager[403]: <info>  [1760180290.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:58:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/202
Oct 11 10:58:10 IQ138000 NetworkManager[403]: <info>  [1760180290.0735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:58:10 IQ138000 NetworkManager[403]: <info>  [1760180290.0737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:58:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:58:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:14 IQ138000 wb-watchdog[29771]: [INFO] Interval #282 started. Waiting up to 60 seconds for error...
Oct 11 10:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 NetworkManager[403]: <info>  [1760180296.0778] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:58:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:58:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:58:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:58:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:58:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:58:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:58:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:58:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:58:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:58:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:58:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:58:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:58:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:58:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:58:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:58:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:58:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:58:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:58:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:58:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:58:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:58:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:58:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:58:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:58:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:58:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:58:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:58:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:58:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:58:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:58:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:58:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:58:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:58:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:58:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:58:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:58:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:58:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:58:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:58:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:58:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:58:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:58:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:58:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:58:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:58:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:58:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:58:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:58:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:58:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:58:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:58:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:58:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:58:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:58:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:58:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:58:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:58:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:58:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:58:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:58:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:58:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:58:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:58:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:58:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:58:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:58:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:58:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:58:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:58:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:58:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:58:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:58:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:58:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:58:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:58:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:58:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:58:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L2, row count 7183, limit 7042
Oct 11 10:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:59:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1311] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1316] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1335] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1411] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1438] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1447] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1533] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1560] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1585] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1588] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1589] Config: added 'scan_ssid' value '1'
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1592] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1594] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.1595] Config: added 'psk' value '<hidden>'
Oct 11 10:59:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/203
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.2307] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 10:59:11 IQ138000 NetworkManager[403]: <info>  [1760180351.2309] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 10:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 10:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 10:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:14 IQ138000 wb-watchdog[30376]: [INFO] Interval #283 started. Waiting up to 60 seconds for error...
Oct 11 10:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:59:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:59:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:59:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:59:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:59:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:59:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:59:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:59:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:59:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:59:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:59:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:59:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:59:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:59:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:59:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:59:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:59:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:59:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:59:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:59:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:59:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:59:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:59:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:59:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:59:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:59:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:59:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:59:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:59:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:59:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:59:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:59:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:59:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:59:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:59:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:59:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:59:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:59:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:36 IQ138000 NetworkManager[403]: <warn>  [1760180376.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 10:59:36 IQ138000 NetworkManager[403]: <info>  [1760180376.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 10:59:36 IQ138000 NetworkManager[403]: <warn>  [1760180376.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 10:59:36 IQ138000 NetworkManager[403]: <info>  [1760180376.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 10:59:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/203
Oct 11 10:59:36 IQ138000 NetworkManager[403]: <info>  [1760180376.0706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 10:59:36 IQ138000 NetworkManager[403]: <info>  [1760180376.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 10:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0007e48747/voltage, row count 7183, limit 7042
Oct 11 10:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 10:59:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 10:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:41 IQ138000 NetworkManager[403]: <info>  [1760180381.8897] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 10:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 10:59:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 10:59:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 10:59:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 10:59:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 10:59:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 10:59:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 10:59:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 10:59:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 10:59:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 10:59:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 10:59:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 10:59:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 10:59:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 10:59:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 10:59:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 10:59:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 10:59:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 10:59:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 10:59:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 10:59:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 10:59:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 10:59:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:59:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 10:59:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 10:59:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 10:59:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 10:59:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 10:59:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 10:59:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 10:59:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 10:59:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 10:59:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 10:59:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 10:59:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 10:59:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 10:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 10:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 10:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 10:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 10:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 10:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 10:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 10:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:00:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:00:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:14 IQ138000 wb-watchdog[31083]: [INFO] Interval #284 started. Waiting up to 60 seconds for error...
Oct 11 11:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:00:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:00:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:00:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:00:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:00:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:00:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:00:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:00:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:00:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:00:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:00:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:00:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:00:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:00:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:00:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:00:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:00:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:00:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:00:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:00:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:00:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:00:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:00:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:00:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:00:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:00:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:00:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:00:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:00:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:00:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:00:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:00:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:00:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:00:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:00:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:00:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:00:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:00:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.8982] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.8987] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.8993] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9055] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9071] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9073] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9162] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9184] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9202] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9206] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9207] Config: added 'scan_ssid' value '1'
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9208] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9209] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9210] Config: added 'psk' value '<hidden>'
Oct 11 11:00:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/204
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9946] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:00:36 IQ138000 NetworkManager[403]: <info>  [1760180436.9948] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:00:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:00:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:00:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:00:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:00:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:00:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:00:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:00:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:00:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:00:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:00:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:00:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:00:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:00:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:00:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:00:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:00:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:00:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:00:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:00:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:00:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:00:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:00:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:00:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:00:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:00:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:00:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:00:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:00:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:00:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:00:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:00:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:00:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:00:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:00:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:00:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:00:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:00:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12816 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:02 IQ138000 NetworkManager[403]: <warn>  [1760180462.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:01:02 IQ138000 NetworkManager[403]: <info>  [1760180462.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:01:02 IQ138000 NetworkManager[403]: <warn>  [1760180462.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:01:02 IQ138000 NetworkManager[403]: <info>  [1760180462.0301] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:01:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/204
Oct 11 11:01:02 IQ138000 NetworkManager[403]: <info>  [1760180462.0732] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:01:02 IQ138000 NetworkManager[403]: <info>  [1760180462.0734] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:07 IQ138000 NetworkManager[403]: <info>  [1760180467.6629] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:14 IQ138000 wb-watchdog[31687]: [INFO] Interval #285 started. Waiting up to 60 seconds for error...
Oct 11 11:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:01:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:01:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:01:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:01:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:01:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:01:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:01:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:01:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:01:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:01:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:01:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:01:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:01:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:01:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:01:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:01:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:01:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:01:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:01:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:01:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:01:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:01:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:01:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:01:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:01:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:01:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:01:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:01:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:01:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:01:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:01:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:01:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:01:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:01:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:01:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:01:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:01:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:01:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:01:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:01:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4664 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:01:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:01:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:01:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:01:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:01:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:01:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:01:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:01:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:01:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:01:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:01:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:01:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:01:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:01:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:01:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:01:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:01:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:01:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:01:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:01:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:01:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:01:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:01:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:01:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:01:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:01:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:01:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:01:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:01:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:01:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:01:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:01:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:01:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:01:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:01:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:01:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:01:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:01:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:01:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7374] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7379] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7384] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7450] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7469] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7471] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7558] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7577] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7594] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7597] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7599] Config: added 'scan_ssid' value '1'
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7600] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7602] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.7604] Config: added 'psk' value '<hidden>'
Oct 11 11:02:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/205
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.8286] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:02:02 IQ138000 NetworkManager[403]: <info>  [1760180522.8288] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:02:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:14 IQ138000 wb-watchdog[32389]: [INFO] Interval #286 started. Waiting up to 60 seconds for error...
Oct 11 11:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:02:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:02:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:02:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:02:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:02:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:02:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:02:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:02:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:02:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:02:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:02:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:02:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:02:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:02:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:02:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:02:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:02:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:02:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:02:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:02:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:02:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:02:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:02:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:02:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:02:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:02:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:02:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:02:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:02:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:02:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:02:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:02:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:02:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:02:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:02:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:02:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:02:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:02:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:02:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:28 IQ138000 NetworkManager[403]: <warn>  [1760180548.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:02:28 IQ138000 NetworkManager[403]: <info>  [1760180548.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:02:28 IQ138000 NetworkManager[403]: <warn>  [1760180548.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:02:28 IQ138000 NetworkManager[403]: <info>  [1760180548.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:02:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/205
Oct 11 11:02:28 IQ138000 NetworkManager[403]: <info>  [1760180548.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:02:28 IQ138000 NetworkManager[403]: <info>  [1760180548.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:02:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:34 IQ138000 NetworkManager[403]: <info>  [1760180554.4940] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:02:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 11:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 11:02:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 11:02:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 11:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:02:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:02:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:02:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:02:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:02:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:02:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:02:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:02:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:02:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:02:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:02:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:02:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:02:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:02:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:02:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:02:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:02:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:02:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:02:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:02:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:02:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:02:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:02:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:02:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:02:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:02:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:02:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:02:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:02:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:02:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:02:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:02:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:02:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:02:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:02:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:02:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:02:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:02:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:02:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:03:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:14 IQ138000 wb-watchdog[560]: [INFO] Interval #287 started. Waiting up to 60 seconds for error...
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:03:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:03:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:03:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:03:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:03:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:03:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:03:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:03:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:03:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:03:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:03:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:03:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:03:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:03:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:03:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:03:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:03:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:03:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:03:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:03:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:03:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:03:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:03:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:03:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:03:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:03:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:03:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:03:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:03:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:03:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:03:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:03:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:03:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:03:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:03:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:03:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:03:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:03:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.4887] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.4892] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.4900] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.4954] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.4971] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.4973] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5124] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5153] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5180] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5183] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5184] Config: added 'scan_ssid' value '1'
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5185] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5187] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5188] Config: added 'psk' value '<hidden>'
Oct 11 11:03:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/206
Oct 11 11:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5923] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:03:29 IQ138000 NetworkManager[403]: <info>  [1760180609.5925] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:03:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:03:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:03:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:03:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:03:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:03:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:03:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:03:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:03:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:03:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:03:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:03:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:03:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:03:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:03:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:03:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:03:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:03:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:03:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:03:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:03:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:03:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:03:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:03:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:03:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:03:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:03:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:03:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:03:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:03:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:03:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:03:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:03:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:03:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:03:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:03:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:03:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:03:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:03:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:03:55 IQ138000 NetworkManager[403]: <warn>  [1760180635.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:03:55 IQ138000 NetworkManager[403]: <info>  [1760180635.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:03:55 IQ138000 NetworkManager[403]: <warn>  [1760180635.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:03:55 IQ138000 NetworkManager[403]: <info>  [1760180635.0277] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:03:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/206
Oct 11 11:03:55 IQ138000 NetworkManager[403]: <info>  [1760180635.0682] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:03:55 IQ138000 NetworkManager[403]: <info>  [1760180635.0684] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:01 IQ138000 NetworkManager[403]: <info>  [1760180641.2200] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:04:14 IQ138000 wb-watchdog[1268]: [INFO] Interval #288 started. Waiting up to 60 seconds for error...
Oct 11 11:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:04:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:04:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:04:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:04:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:04:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:04:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:04:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:04:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:04:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:04:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:04:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:04:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:04:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:04:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:04:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:04:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:04:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:04:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:04:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:04:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:04:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:04:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:04:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:04:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:04:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:04:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:04:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:04:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:04:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:04:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:04:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:04:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:04:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:04:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:04:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:04:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:04:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:04:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:04:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:04:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:04:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:04:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:04:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:04:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:04:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:04:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:04:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:04:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:04:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:04:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:04:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:04:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:04:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:04:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:04:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:04:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:04:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:04:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:04:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:04:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:04:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:04:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:04:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:04:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:04:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:04:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:04:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:04:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:04:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:04:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:04:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:04:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:04:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:04:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:04:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.3939] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.3958] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.3966] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4072] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4092] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4094] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4269] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4346] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4367] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4370] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4371] Config: added 'scan_ssid' value '1'
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4372] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4374] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.4374] Config: added 'psk' value '<hidden>'
Oct 11 11:04:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/207
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.5174] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:04:56 IQ138000 NetworkManager[403]: <info>  [1760180696.5176] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:04:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:04:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:01 IQ138000 CRON[1705]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:05:01 IQ138000 CRON[1709]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 11:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:01 IQ138000 CRON[1705]: pam_unix(cron:session): session closed for user root
Oct 11 11:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:05:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:14 IQ138000 wb-watchdog[1903]: [INFO] Interval #289 started. Waiting up to 60 seconds for error...
Oct 11 11:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:05:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:05:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:05:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:05:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:05:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:05:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:05:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:05:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:05:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:05:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:05:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:05:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:05:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:05:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:05:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:05:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:05:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:05:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:05:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:05:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:05:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:05:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:05:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:05:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:05:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:05:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:05:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:05:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:05:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:05:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:05:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:05:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:05:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:05:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:05:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:05:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:05:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:05:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:05:22 IQ138000 NetworkManager[403]: <warn>  [1760180722.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:05:22 IQ138000 NetworkManager[403]: <info>  [1760180722.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:05:22 IQ138000 NetworkManager[403]: <warn>  [1760180722.0262] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:05:22 IQ138000 NetworkManager[403]: <info>  [1760180722.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:05:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:05:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/207
Oct 11 11:05:22 IQ138000 NetworkManager[403]: <info>  [1760180722.0730] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:05:22 IQ138000 NetworkManager[403]: <info>  [1760180722.0733] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:28 IQ138000 NetworkManager[403]: <info>  [1760180728.2157] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L2, row count 7183, limit 7042
Oct 11 11:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:05:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:05:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:05:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:05:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:05:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:05:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:05:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:05:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:05:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:05:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:05:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:05:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:05:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:05:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:05:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:05:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:05:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:05:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:05:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:05:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:05:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:05:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:05:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:05:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:05:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:05:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:05:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:05:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:05:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:05:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:05:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:05:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:05:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:05:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:05:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:05:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:05:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:06:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:06:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:14 IQ138000 wb-watchdog[2648]: [INFO] Interval #290 started. Waiting up to 60 seconds for error...
Oct 11 11:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:06:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:06:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:06:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:06:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:06:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:06:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:06:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:06:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:06:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:06:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:06:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:06:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:06:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:06:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:06:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:06:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:06:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:06:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:06:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:06:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:06:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:06:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:06:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:06:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:06:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:06:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:06:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:06:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:06:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:06:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:06:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:06:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:06:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:06:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:06:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:06:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.4932] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.4937] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.4943] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5009] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5052] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5065] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5187] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5219] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5261] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5264] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5265] Config: added 'scan_ssid' value '1'
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5266] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5268] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:06:23 IQ138000 NetworkManager[403]: <info>  [1760180783.5268] Config: added 'psk' value '<hidden>'
Oct 11 11:06:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/208
Oct 11 11:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:26 IQ138000 NetworkManager[403]: <info>  [1760180786.6082] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:06:26 IQ138000 NetworkManager[403]: <info>  [1760180786.6084] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:06:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:06:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:06:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:06:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:06:49 IQ138000 NetworkManager[403]: <warn>  [1760180809.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:06:49 IQ138000 NetworkManager[403]: <info>  [1760180809.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:06:49 IQ138000 NetworkManager[403]: <warn>  [1760180809.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:06:49 IQ138000 NetworkManager[403]: <info>  [1760180809.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:06:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/208
Oct 11 11:06:49 IQ138000 NetworkManager[403]: <info>  [1760180809.0660] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:06:49 IQ138000 NetworkManager[403]: <info>  [1760180809.0662] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:06:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:06:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:06:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:06:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:06:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:06:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:06:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:06:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:06:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:06:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:06:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:06:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:06:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:06:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:06:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:06:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:06:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:06:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:06:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:06:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:06:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:06:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:06:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:06:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:06:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:06:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:06:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:06:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:06:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:06:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:06:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:06:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:06:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:06:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:06:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:06:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:06:55 IQ138000 NetworkManager[403]: <info>  [1760180815.2520] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:07:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:14 IQ138000 wb-watchdog[3290]: [INFO] Interval #291 started. Waiting up to 60 seconds for error...
Oct 11 11:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:07:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:07:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:07:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:07:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:07:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:07:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:07:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:07:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:07:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:07:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:07:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:07:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:07:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:07:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:07:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:07:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:07:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:07:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:07:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:07:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:07:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:07:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:07:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:07:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:07:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:07:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:07:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:07:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:07:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:07:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:07:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:07:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:07:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:07:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:07:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:07:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:07:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:23 IQ138000 npm[3801]: [2025-10-11 11:07:23] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.68,"last_seen":1760180843992,"linkquality":105,"power_outage_count":48745,"temperature":27.04,"voltage":3025}'
Oct 11 11:07:24 IQ138000 npm[3801]: [2025-10-11 11:07:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.71,"last_seen":1760180844004,"linkquality":102,"power_outage_count":48745,"temperature":27.04,"voltage":3025}'
Oct 11 11:07:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760181024069,"cmd_timestamp_ms":1760180844069,"source":"regulation"}
Oct 11 11:07:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760181024069,"cmd_timestamp_ms":1760180844069,"source":"regulation"}
Oct 11 11:07:25 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 11:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:07:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:30 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 11:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:07:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 11:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:07:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:07:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.1896] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.1902] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.1908] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.1974] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.1991] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.1992] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2079] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2098] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2115] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2117] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2118] Config: added 'scan_ssid' value '1'
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2119] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2120] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2121] Config: added 'psk' value '<hidden>'
Oct 11 11:07:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/209
Oct 11 11:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2911] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:07:50 IQ138000 NetworkManager[403]: <info>  [1760180870.2913] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:07:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:07:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:07:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:07:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:07:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:07:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:07:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:07:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:07:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:07:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:07:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:07:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:07:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:07:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:07:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:07:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:07:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:07:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:07:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:07:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:07:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:07:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:07:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:07:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:07:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:07:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:07:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:07:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:07:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:07:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:07:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:07:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:07:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:07:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:07:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:07:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:07:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:07:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:07:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:08:01 IQ138000 CRON[3840]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:08:01 IQ138000 CRON[3844]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 11:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:02 IQ138000 sSMTP[3869]: Unable to locate mail
Oct 11 11:08:02 IQ138000 cron[3869]: sendmail: Cannot open mail:25
Oct 11 11:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:02 IQ138000 sSMTP[3869]: Cannot open mail:25
Oct 11 11:08:02 IQ138000 CRON[3840]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 11:08:02 IQ138000 CRON[3840]: pam_unix(cron:session): session closed for user root
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:08:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:14 IQ138000 wb-watchdog[4042]: [INFO] Interval #292 started. Waiting up to 60 seconds for error...
Oct 11 11:08:15 IQ138000 NetworkManager[403]: <warn>  [1760180895.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:08:15 IQ138000 NetworkManager[403]: <info>  [1760180895.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:08:15 IQ138000 NetworkManager[403]: <warn>  [1760180895.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:08:15 IQ138000 NetworkManager[403]: <info>  [1760180895.0271] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:08:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/209
Oct 11 11:08:15 IQ138000 NetworkManager[403]: <info>  [1760180895.0711] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:08:15 IQ138000 NetworkManager[403]: <info>  [1760180895.0712] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:20 IQ138000 NetworkManager[403]: <info>  [1760180900.9245] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:08:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:08:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:08:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:08:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:08:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:08:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:08:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:08:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:08:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:08:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:08:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:08:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:08:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:08:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:08:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:08:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:08:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:08:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:08:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:08:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:08:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:08:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:08:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:08:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:08:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:08:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:08:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:08:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:08:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:08:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:08:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:08:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:08:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:08:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:08:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:08:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:08:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17154 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4640 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:08:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:08:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:08:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:08:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:08:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:08:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:08:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:08:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:08:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:08:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:08:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:08:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:08:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:08:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:08:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:08:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:08:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:08:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:08:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:08:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:08:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:08:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:08:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:08:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:08:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:08:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:08:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:08:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:08:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:08:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:08:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:08:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:08:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:08:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:08:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:08:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:08:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:08:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:08:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5140 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:09:14 IQ138000 wb-watchdog[4676]: [INFO] Interval #293 started. Waiting up to 60 seconds for error...
Oct 11 11:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:09:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8425] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8447] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8454] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8514] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8533] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8535] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8633] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8654] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8674] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8680] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8681] Config: added 'scan_ssid' value '1'
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8682] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8683] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.8684] Config: added 'psk' value '<hidden>'
Oct 11 11:09:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/210
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.9380] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:09:15 IQ138000 NetworkManager[403]: <info>  [1760180955.9383] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:09:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:09:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:09:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:09:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:09:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:09:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:09:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:09:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:09:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:09:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:09:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:09:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:09:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:09:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:09:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:09:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:09:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:09:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:09:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:09:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:09:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:09:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:09:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:09:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:09:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:09:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:09:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:09:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:09:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:09:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:09:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:09:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:09:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:09:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:09:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:09:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:09:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:09:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:09:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:41 IQ138000 NetworkManager[403]: <warn>  [1760180981.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:09:41 IQ138000 NetworkManager[403]: <info>  [1760180981.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:09:41 IQ138000 NetworkManager[403]: <warn>  [1760180981.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:09:41 IQ138000 NetworkManager[403]: <info>  [1760180981.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:09:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/210
Oct 11 11:09:41 IQ138000 NetworkManager[403]: <info>  [1760180981.0735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:09:41 IQ138000 NetworkManager[403]: <info>  [1760180981.0755] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:09:47 IQ138000 NetworkManager[403]: <info>  [1760180987.6306] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:09:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:09:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:09:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:09:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:09:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:09:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:09:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:09:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:09:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:09:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:09:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:09:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:09:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:09:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:09:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:09:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:09:53 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:09:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:09:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:09:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:09:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:09:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:09:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:09:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:09:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:09:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:09:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:09:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:09:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:09:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:09:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:09:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:09:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:09:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:09:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:09:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:09:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:09:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:10:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:14 IQ138000 wb-watchdog[5375]: [INFO] Interval #294 started. Waiting up to 60 seconds for error...
Oct 11 11:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:10:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:10:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:10:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:10:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:10:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:10:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:10:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:10:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:10:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:10:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:10:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:10:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:10:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:10:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:10:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:10:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:10:24 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:10:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:10:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:10:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:10:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:10:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:10:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:10:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:10:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:10:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:10:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:10:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:10:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:10:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:10:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:10:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:10:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:10:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:10:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:10:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:10:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:10:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6029] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6054] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6081] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6145] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6187] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6189] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6341] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6369] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6387] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6391] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6392] Config: added 'scan_ssid' value '1'
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6393] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6394] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.6395] Config: added 'psk' value '<hidden>'
Oct 11 11:10:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/211
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.7131] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:10:42 IQ138000 NetworkManager[403]: <info>  [1760181042.7134] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:10:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:10:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:10:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:10:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:10:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:10:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:10:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:10:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:10:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:10:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:10:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:10:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:10:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:10:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:10:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:10:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:10:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:10:54 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:10:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:10:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:10:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:10:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:10:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:10:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:10:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:10:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:10:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:10:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:10:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:10:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:10:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:10:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:10:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:10:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:10:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:10:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:10:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:08 IQ138000 NetworkManager[403]: <warn>  [1760181068.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:11:08 IQ138000 NetworkManager[403]: <info>  [1760181068.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:11:08 IQ138000 NetworkManager[403]: <warn>  [1760181068.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:11:08 IQ138000 NetworkManager[403]: <info>  [1760181068.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:11:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/211
Oct 11 11:11:08 IQ138000 NetworkManager[403]: <info>  [1760181068.0631] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:11:08 IQ138000 NetworkManager[403]: <info>  [1760181068.0633] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:11:14 IQ138000 NetworkManager[403]: <info>  [1760181074.3604] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:11:14 IQ138000 wb-watchdog[5995]: [INFO] Interval #295 started. Waiting up to 60 seconds for error...
Oct 11 11:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:11:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:11:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:11:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:11:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:11:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:11:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:11:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:11:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:11:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:11:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:11:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:11:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:11:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:11:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:11:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:11:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:11:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:11:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:11:24 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:11:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:11:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:11:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:11:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:11:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:11:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:11:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:11:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:11:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:11:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:11:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:11:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:11:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:11:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:11:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:11:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:11:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:11:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:11:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:11:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:11:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:11:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:11:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:11:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:11:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:11:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:11:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:11:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:11:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:11:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:11:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:11:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:11:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:11:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:11:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:11:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:11:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:11:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:11:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:11:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:11:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:11:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:11:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:11:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:11:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:11:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:11:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:11:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:11:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:11:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:11:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:11:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:11:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:11:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:11:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:11:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:11:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:11:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:11:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:11:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:12:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:12:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5541] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5546] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5552] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5609] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5626] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5629] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5712] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5734] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5750] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5753] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5755] Config: added 'scan_ssid' value '1'
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5755] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5757] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.5757] Config: added 'psk' value '<hidden>'
Oct 11 11:12:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/212
Oct 11 11:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.6455] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:12:09 IQ138000 NetworkManager[403]: <info>  [1760181129.6459] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:12:14 IQ138000 wb-watchdog[6720]: [INFO] Interval #296 started. Waiting up to 60 seconds for error...
Oct 11 11:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:12:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:12:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:12:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:12:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:12:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:12:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:12:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:12:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:12:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:12:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:12:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:12:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:12:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:12:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:12:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:12:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:12:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:12:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:12:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:12:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:12:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:12:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:12:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:12:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:12:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:12:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:12:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:12:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:12:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:12:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:12:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:12:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:12:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:12:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:12:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:12:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:12:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:12:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:35 IQ138000 NetworkManager[403]: <warn>  [1760181155.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:12:35 IQ138000 NetworkManager[403]: <info>  [1760181155.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:12:35 IQ138000 NetworkManager[403]: <warn>  [1760181155.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:12:35 IQ138000 NetworkManager[403]: <info>  [1760181155.0273] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:12:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:12:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/212
Oct 11 11:12:35 IQ138000 NetworkManager[403]: <info>  [1760181155.0740] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:12:35 IQ138000 NetworkManager[403]: <info>  [1760181155.0742] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:41 IQ138000 NetworkManager[403]: <info>  [1760181161.2910] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:12:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:12:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:12:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:12:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:12:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:12:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:12:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:12:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:12:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:12:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:12:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:12:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:12:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:12:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:12:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:12:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:12:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:12:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:12:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:12:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:12:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:12:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:12:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:12:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:12:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:12:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:12:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:12:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:12:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:12:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:12:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:12:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:12:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:12:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:12:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:12:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:12:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:12:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:12:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:13:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:13:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:14 IQ138000 wb-watchdog[7338]: [INFO] Interval #297 started. Waiting up to 60 seconds for error...
Oct 11 11:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:13:22 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 11:13:22 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 11 11:13:22 IQ138000 systemd[1]: data-handler.service: Consumed 10.447s CPU time.
Oct 11 11:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:13:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:13:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:13:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:13:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:13:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:13:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:13:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:13:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:13:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:13:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:13:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:13:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:13:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:13:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:13:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:13:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:13:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:13:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:13:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:13:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:13:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:13:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:13:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:13:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:13:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:13:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:13:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:13:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:13:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:13:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:13:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:13:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:13:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:13:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:13:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:13:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:13:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:13:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:13:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.2959] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.2964] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.2984] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3039] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3058] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3059] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3147] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3180] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3210] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3226] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3238] Config: added 'scan_ssid' value '1'
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3249] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3260] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:13:36 IQ138000 NetworkManager[403]: <info>  [1760181216.3269] Config: added 'psk' value '<hidden>'
Oct 11 11:13:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/213
Oct 11 11:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:13:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:13:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:40 IQ138000 NetworkManager[403]: <info>  [1760181220.4039] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:13:40 IQ138000 NetworkManager[403]: <info>  [1760181220.4041] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:13:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:13:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:13:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:13:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:13:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:13:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:13:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:13:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:13:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:13:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:13:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:13:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:13:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:13:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:13:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:13:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:13:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:13:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:13:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:13:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:13:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:13:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:13:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:13:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:13:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:13:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:13:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:13:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:13:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:13:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:13:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:13:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:13:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:13:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:13:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:13:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:02 IQ138000 NetworkManager[403]: <warn>  [1760181242.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:14:02 IQ138000 NetworkManager[403]: <info>  [1760181242.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:14:02 IQ138000 NetworkManager[403]: <warn>  [1760181242.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:14:02 IQ138000 NetworkManager[403]: <info>  [1760181242.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:14:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:14:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/213
Oct 11 11:14:02 IQ138000 NetworkManager[403]: <info>  [1760181242.0683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:14:02 IQ138000 NetworkManager[403]: <info>  [1760181242.0685] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:14:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:08 IQ138000 NetworkManager[403]: <info>  [1760181248.0467] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:14:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:14:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:14:14 IQ138000 wb-watchdog[8041]: [INFO] Interval #298 started. Waiting up to 60 seconds for error...
Oct 11 11:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:22 IQ138000 systemd[1]: data-handler.service: Scheduled restart job, restart counter is at 3.
Oct 11 11:14:22 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 11 11:14:22 IQ138000 systemd[1]: data-handler.service: Consumed 10.447s CPU time.
Oct 11 11:14:22 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 11:14:22 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 11:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:14:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:14:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:14:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:14:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:14:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:14:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:14:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:14:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:14:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:14:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:14:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:14:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:14:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:14:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:14:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:14:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:14:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:14:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:14:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:14:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:14:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:14:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:14:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:14:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:14:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:14:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:14:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:14:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:14:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:14:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:14:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:14:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:14:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:14:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:14:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:14:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:14:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:14:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:14:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:14:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:14:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:14:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:14:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:14:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:14:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:14:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:14:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:14:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:14:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:14:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:14:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:14:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:14:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:14:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:14:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:14:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:14:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:14:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:14:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:14:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:14:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:14:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:14:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:14:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:14:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:14:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:14:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:14:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:14:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:14:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:14:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:14:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:14:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:14:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:14:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:14:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:02 IQ138000 CRON[8484]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:15:02 IQ138000 CRON[8488]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 11:15:02 IQ138000 CRON[8484]: pam_unix(cron:session): session closed for user root
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1395] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1409] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1420] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1502] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1524] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1526] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1625] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1650] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1674] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1679] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1680] Config: added 'scan_ssid' value '1'
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1681] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1683] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:15:03 IQ138000 NetworkManager[403]: <info>  [1760181303.1684] Config: added 'psk' value '<hidden>'
Oct 11 11:15:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/214
Oct 11 11:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:15:07 IQ138000 NetworkManager[403]: <info>  [1760181307.2634] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:15:07 IQ138000 NetworkManager[403]: <info>  [1760181307.2636] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:15:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:14 IQ138000 wb-watchdog[8667]: [INFO] Interval #299 started. Waiting up to 60 seconds for error...
Oct 11 11:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:15:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:15:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:15:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:15:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:15:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:15:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:15:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:15:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:15:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:15:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:15:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:15:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:15:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:15:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:15:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:15:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:15:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:15:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:15:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:15:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:15:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:15:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:15:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:15:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:15:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:15:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:15:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:15:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:15:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:15:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:15:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:15:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:15:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:15:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:15:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:15:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:15:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:15:28 IQ138000 NetworkManager[403]: <warn>  [1760181328.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:15:28 IQ138000 NetworkManager[403]: <info>  [1760181328.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:15:28 IQ138000 NetworkManager[403]: <warn>  [1760181328.0267] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:15:28 IQ138000 NetworkManager[403]: <info>  [1760181328.0297] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:15:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/214
Oct 11 11:15:28 IQ138000 NetworkManager[403]: <info>  [1760181328.0738] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:15:28 IQ138000 NetworkManager[403]: <info>  [1760181328.0752] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:15:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:33 IQ138000 NetworkManager[403]: <info>  [1760181333.9178] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:15:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:15:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:15:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:15:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:15:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:15:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:15:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:15:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:15:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:15:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:15:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:15:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:15:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:15:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:15:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:15:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:15:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:15:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:15:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:15:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:15:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:15:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:15:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:15:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:15:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:15:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:15:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:15:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:15:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:15:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:15:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:15:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:15:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:15:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:15:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:15:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:15:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:15:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:15:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:15:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:15:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:01 IQ138000 npm[3801]: [2025-10-11 11:16:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.71,"last_seen":1760181361107,"linkquality":98,"power_outage_count":48745,"temperature":26.53,"voltage":3025}'
Oct 11 11:16:01 IQ138000 npm[3801]: [2025-10-11 11:16:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.18,"last_seen":1760181361123,"linkquality":98,"power_outage_count":48745,"temperature":26.53,"voltage":3025}'
Oct 11 11:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:01 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760181541208,"cmd_timestamp_ms":1760181361208,"source":"regulation"}
Oct 11 11:16:01 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760181541208,"cmd_timestamp_ms":1760181361208,"source":"regulation"}
Oct 11 11:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:16:02 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 11:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:16:07 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 11:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5108>: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:16:14 IQ138000 wb-watchdog[9368]: [INFO] Interval #300 started. Waiting up to 60 seconds for error...
Oct 11 11:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:16:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:16:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:16:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:16:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:16:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:16:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:16:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:16:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:16:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:16:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:16:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:16:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:16:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:16:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:16:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:16:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:16:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:16:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:16:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:16:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:16:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:16:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:16:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:16:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:16:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:16:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:16:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:16:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:16:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:16:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:16:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:16:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:16:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:16:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:16:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:16:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:16:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:16:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1331] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1345] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1352] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1402] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1420] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1422] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1548] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1569] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1588] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1591] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1593] Config: added 'scan_ssid' value '1'
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1594] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1595] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.1596] Config: added 'psk' value '<hidden>'
Oct 11 11:16:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/215
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.2412] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:16:29 IQ138000 NetworkManager[403]: <info>  [1760181389.2414] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:16:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:54 IQ138000 NetworkManager[403]: <warn>  [1760181414.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:16:54 IQ138000 NetworkManager[403]: <info>  [1760181414.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:16:54 IQ138000 NetworkManager[403]: <warn>  [1760181414.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:16:54 IQ138000 NetworkManager[403]: <info>  [1760181414.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:16:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/215
Oct 11 11:16:54 IQ138000 NetworkManager[403]: <info>  [1760181414.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:16:54 IQ138000 NetworkManager[403]: <info>  [1760181414.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:16:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:16:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:16:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:16:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:16:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:16:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:16:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:16:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:16:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:16:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:16:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:16:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:16:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:16:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:16:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:16:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:16:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:16:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:16:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:16:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:16:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:16:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:16:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:16:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:16:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:16:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:16:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:16:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:16:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:16:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:16:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:16:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:16:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:16:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:16:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:16:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:16:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:16:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:16:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:16:59 IQ138000 NetworkManager[403]: <info>  [1760181419.8238] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:01 IQ138000 CRON[9801]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:17:01 IQ138000 CRON[9805]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 11:17:01 IQ138000 CRON[9801]: pam_unix(cron:session): session closed for user root
Oct 11 11:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:17:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 11:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:17:14 IQ138000 wb-watchdog[9991]: [INFO] Interval #301 started. Waiting up to 60 seconds for error...
Oct 11 11:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:17:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:17:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:17:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:17:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:17:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:17:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:17:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:17:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:17:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:17:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:17:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:17:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:17:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:17:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:17:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:17:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:17:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:17:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:17:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:17:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:17:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:17:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:17:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:17:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:17:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:17:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:17:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:17:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:17:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:17:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:17:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:17:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:17:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:17:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:17:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:17:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:17:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:17:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L3, row count 7183, limit 7042
Oct 11 11:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8356] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8361] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8366] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8452] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8469] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8470] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8588] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8625] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8656] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8671] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8673] Config: added 'scan_ssid' value '1'
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8674] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8675] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.8676] Config: added 'psk' value '<hidden>'
Oct 11 11:17:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/216
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.9375] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:17:54 IQ138000 NetworkManager[403]: <info>  [1760181474.9377] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:17:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:17:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:17:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:17:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:17:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:17:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:17:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:17:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:17:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:17:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:17:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:17:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:17:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:17:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:17:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:17:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:17:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:17:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:17:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:17:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:17:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:17:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:17:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:17:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:17:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:17:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:17:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:17:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:17:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:17:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:17:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:17:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:17:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:17:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:17:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:17:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:17:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:18:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:18:14 IQ138000 wb-watchdog[10706]: [INFO] Interval #302 started. Waiting up to 60 seconds for error...
Oct 11 11:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:18:20 IQ138000 NetworkManager[403]: <warn>  [1760181500.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:18:20 IQ138000 NetworkManager[403]: <info>  [1760181500.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:18:20 IQ138000 NetworkManager[403]: <warn>  [1760181500.0269] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:18:20 IQ138000 NetworkManager[403]: <info>  [1760181500.0287] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:18:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/216
Oct 11 11:18:20 IQ138000 NetworkManager[403]: <info>  [1760181500.0721] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:18:20 IQ138000 NetworkManager[403]: <info>  [1760181500.0723] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:18:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:18:26 IQ138000 NetworkManager[403]: <info>  [1760181506.5926] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:18:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:18:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:18:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:18:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:18:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:18:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:18:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:18:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:18:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:18:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:18:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:18:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:18:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:18:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:18:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:18:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:18:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:18:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:18:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:18:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:18:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:18:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:18:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:18:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:18:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:18:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:18:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:18:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:18:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:18:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:18:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:18:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:18:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:18:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:18:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:18:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:18:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:18:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:18:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:18:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:18:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:18:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:18:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:18:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:18:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:18:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:18:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:18:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:18:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:18:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:18:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:18:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:18:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:18:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:18:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:18:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:18:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:18:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:18:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:18:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:18:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:18:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:18:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:18:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:18:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:18:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:18:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:18:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:18:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:18:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:18:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:18:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:18:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:18:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:18:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:19:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:14 IQ138000 wb-watchdog[11314]: [INFO] Interval #303 started. Waiting up to 60 seconds for error...
Oct 11 11:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5251] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5264] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5270] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5357] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5375] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5377] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5485] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5507] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5529] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5533] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5534] Config: added 'scan_ssid' value '1'
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5535] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5536] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.5537] Config: added 'psk' value '<hidden>'
Oct 11 11:19:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/217
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.6442] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:19:21 IQ138000 NetworkManager[403]: <info>  [1760181561.6444] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:19:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:19:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:19:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:19:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:19:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:19:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:19:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:19:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:19:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:19:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:19:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:19:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:19:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:19:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:19:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:19:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:19:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:19:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:19:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:19:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:19:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:19:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:19:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:19:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:19:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:19:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:19:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:19:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:19:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:19:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:19:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:19:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:19:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:19:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:19:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:19:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:19:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:19:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:47 IQ138000 NetworkManager[403]: <warn>  [1760181587.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:19:47 IQ138000 NetworkManager[403]: <info>  [1760181587.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:19:47 IQ138000 NetworkManager[403]: <warn>  [1760181587.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:19:47 IQ138000 NetworkManager[403]: <info>  [1760181587.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:19:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:19:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/217
Oct 11 11:19:47 IQ138000 NetworkManager[403]: <info>  [1760181587.0769] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:19:47 IQ138000 NetworkManager[403]: <info>  [1760181587.0784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:19:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:19:53 IQ138000 NetworkManager[403]: <info>  [1760181593.2919] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:19:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:19:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:19:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:19:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:19:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:19:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:19:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:19:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:19:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:19:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:19:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:19:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:19:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:19:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:19:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:19:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:19:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:19:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:19:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:19:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:19:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:19:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:19:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:19:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:19:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:19:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:19:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:19:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:19:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:19:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:19:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:19:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:19:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:19:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:19:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:19:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:14 IQ138000 wb-watchdog[12013]: [INFO] Interval #304 started. Waiting up to 60 seconds for error...
Oct 11 11:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:20:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:20:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:20:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:20:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:20:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:20:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:20:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:20:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:20:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:20:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:20:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:20:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:20:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:20:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:20:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:20:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:20:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:20:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:20:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:20:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:20:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:20:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:20:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:20:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:20:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:20:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:20:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:20:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:20:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:20:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:20:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:20:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:20:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:20:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:20:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:20:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:20:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:20:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:20:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:20:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:20:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.2908] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.2921] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.2946] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3076] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3098] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3100] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3216] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3243] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3286] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3290] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3291] Config: added 'scan_ssid' value '1'
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3292] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3293] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:20:48 IQ138000 NetworkManager[403]: <info>  [1760181648.3294] Config: added 'psk' value '<hidden>'
Oct 11 11:20:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/218
Oct 11 11:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:20:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:20:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:51 IQ138000 npm[3801]: [2025-10-11 11:20:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":45.08,"last_seen":1760181651675,"linkquality":80,"power_outage_count":25795,"pressure":992.5,"temperature":23.66,"voltage":2995}'
Oct 11 11:20:51 IQ138000 npm[3801]: [2025-10-11 11:20:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":44.87,"last_seen":1760181651695,"linkquality":83,"power_outage_count":25795,"pressure":992.5,"temperature":23.66,"voltage":2995}'
Oct 11 11:20:51 IQ138000 npm[3801]: [2025-10-11 11:20:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":44.87,"last_seen":1760181651695,"linkquality":83,"power_outage_count":25795,"pressure":992.3,"temperature":23.66,"voltage":2995}'
Oct 11 11:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:52 IQ138000 NetworkManager[403]: <info>  [1760181652.4094] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:20:52 IQ138000 NetworkManager[403]: <info>  [1760181652.4096] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:20:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:20:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:20:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:20:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:20:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:20:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:20:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:20:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:20:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:20:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:20:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:20:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:20:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:20:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:20:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:20:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:20:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:20:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:20:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:20:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:20:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:20:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:20:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:20:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:20:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:20:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:20:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:20:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:20:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:20:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:20:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:20:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:20:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:20:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:20:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:20:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:20:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:21:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16936 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:14 IQ138000 NetworkManager[403]: <warn>  [1760181674.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:21:14 IQ138000 NetworkManager[403]: <info>  [1760181674.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:21:14 IQ138000 NetworkManager[403]: <warn>  [1760181674.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:21:14 IQ138000 NetworkManager[403]: <info>  [1760181674.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:21:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/218
Oct 11 11:21:14 IQ138000 NetworkManager[403]: <info>  [1760181674.0767] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:21:14 IQ138000 NetworkManager[403]: <info>  [1760181674.0770] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:21:14 IQ138000 wb-watchdog[12628]: [INFO] Interval #305 started. Waiting up to 60 seconds for error...
Oct 11 11:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:21:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:20 IQ138000 NetworkManager[403]: <info>  [1760181680.0294] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:21:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:21:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:21:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:21:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:21:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:21:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:21:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:21:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:21:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:21:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:21:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:21:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:21:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:21:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:21:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:21:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:21:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:21:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:21:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:21:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:21:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:21:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:21:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:21:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:21:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:21:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:21:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:21:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:21:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:21:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:21:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:21:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:21:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:21:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:21:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:21:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:21:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:21:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:21:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:21:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:21:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:21:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:21:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:21:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:21:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:21:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:21:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:21:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:21:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:21:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:21:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:21:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:21:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:21:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:21:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:21:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:21:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:21:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:21:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:21:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:21:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:21:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:21:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:21:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:21:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:21:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:21:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:21:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:21:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:21:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:21:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:21:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:21:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:21:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:21:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:22:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:22:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 11:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:22:14 IQ138000 wb-watchdog[13328]: [INFO] Interval #306 started. Waiting up to 60 seconds for error...
Oct 11 11:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:22:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1184] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1188] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1194] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1262] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1279] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1281] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1442] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1460] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1476] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1479] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1480] Config: added 'scan_ssid' value '1'
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1481] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1482] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.1483] Config: added 'psk' value '<hidden>'
Oct 11 11:22:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/219
Oct 11 11:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.2285] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:22:15 IQ138000 NetworkManager[403]: <info>  [1760181735.2288] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:22:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:22:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:22:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:22:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:22:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:22:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:22:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:22:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:22:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:22:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:22:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:22:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:22:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:22:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:22:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:22:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:22:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:22:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:22:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:22:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:22:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:22:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:22:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:22:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:22:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:22:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:22:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:22:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:22:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:22:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:22:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:22:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:22:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:22:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:22:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:22:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:22:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:40 IQ138000 NetworkManager[403]: <warn>  [1760181760.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:22:40 IQ138000 NetworkManager[403]: <info>  [1760181760.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:22:40 IQ138000 NetworkManager[403]: <warn>  [1760181760.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:22:40 IQ138000 NetworkManager[403]: <info>  [1760181760.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:22:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/219
Oct 11 11:22:40 IQ138000 NetworkManager[403]: <info>  [1760181760.0729] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:22:40 IQ138000 NetworkManager[403]: <info>  [1760181760.0731] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:45 IQ138000 NetworkManager[403]: <info>  [1760181765.8444] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:22:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:22:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:22:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:22:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:22:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:22:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:22:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:22:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:22:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:22:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:22:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:22:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:22:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:22:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:22:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:22:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:22:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:22:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:22:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:22:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:22:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:22:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:22:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:22:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:22:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:22:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:22:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:22:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:22:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:22:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:22:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:22:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:22:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:22:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:22:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:22:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:22:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:22:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:23:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:23:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:14 IQ138000 wb-watchdog[13939]: [INFO] Interval #307 started. Waiting up to 60 seconds for error...
Oct 11 11:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:23:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:23:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:22 IQ138000 lsyncd[6566]: 11:23:22 Normal: Calling rsync with filter-list of new/modified files/dirs
Oct 11 11:23:22 IQ138000 lsyncd[6566]: /data-handler/20251011-103930000.txt
Oct 11 11:23:22 IQ138000 lsyncd[6566]: /data-handler/
Oct 11 11:23:22 IQ138000 lsyncd[6566]: /
Oct 11 11:23:22 IQ138000 lsyncd[6566]: /data-handler/20251011-111422000.txt
Oct 11 11:23:22 IQ138000 lsyncd[6566]: /data-handler/20251011-061910000.txt
Oct 11 11:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:23 IQ138000 lsyncd[6566]: 11:23:23 Normal: Finished (list): 0
Oct 11 11:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:23:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:23:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:23:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:23:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:23:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:23:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:23:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:23:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:23:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:23:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:23:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:23:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:23:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:23:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:23:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:23:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:23:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:23:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:23:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:23:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:23:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:23:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:23:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:23:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:23:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:23:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:23:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:23:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:23:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:23:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:23:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:23:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:23:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:23:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:23:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:23:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:23:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.8953] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.8963] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.8970] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9023] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9055] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9057] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9132] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9149] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9165] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9168] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9170] Config: added 'scan_ssid' value '1'
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9171] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9173] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9174] Config: added 'psk' value '<hidden>'
Oct 11 11:23:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/220
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9872] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:23:40 IQ138000 NetworkManager[403]: <info>  [1760181820.9874] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:23:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:23:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:23:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:23:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:23:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:23:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:23:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:23:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:23:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:23:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:23:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:23:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:23:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:23:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:23:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:23:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:23:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:23:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:23:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:23:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:23:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:23:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:23:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:23:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:23:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:23:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:23:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:23:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:23:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:23:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:23:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:23:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:23:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:23:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:23:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:23:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:23:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:23:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:23:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:24:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:06 IQ138000 NetworkManager[403]: <warn>  [1760181846.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:24:06 IQ138000 NetworkManager[403]: <info>  [1760181846.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:24:06 IQ138000 NetworkManager[403]: <warn>  [1760181846.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:24:06 IQ138000 NetworkManager[403]: <info>  [1760181846.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:24:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/220
Oct 11 11:24:06 IQ138000 NetworkManager[403]: <info>  [1760181846.0731] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:24:06 IQ138000 NetworkManager[403]: <info>  [1760181846.0740] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:24:11 IQ138000 NetworkManager[403]: <info>  [1760181851.6457] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:14 IQ138000 wb-watchdog[14648]: [INFO] Interval #308 started. Waiting up to 60 seconds for error...
Oct 11 11:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:24:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:24:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:24:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:24:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:24:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:24:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:24:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:24:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:24:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:24:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:24:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:24:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:24:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:24:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:24:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:24:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:24:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:24:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:24:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:24:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:24:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:24:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:24:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:24:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:24:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:24:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:24:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:24:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:24:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:24:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:24:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:24:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:24:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:24:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:24:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:24:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:24:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:24:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 11:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:24:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L3, row count 7183, limit 7042
Oct 11 11:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:24:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:24:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:24:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:25:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:25:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:25:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:25:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:25:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:25:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:25:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:25:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:25:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:25:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:25:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:25:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:25:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:25:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:25:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:25:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:25:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:25:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:25:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:25:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:25:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:25:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:25:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:25:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:25:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:25:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:25:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:25:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:25:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:25:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:25:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:25:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:25:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:25:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:25:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:25:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:01 IQ138000 CRON[15078]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:25:01 IQ138000 CRON[15083]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 11:25:01 IQ138000 CRON[15078]: pam_unix(cron:session): session closed for user root
Oct 11 11:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5456] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5474] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5482] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5537] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5555] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5557] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5657] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5685] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5705] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5710] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5711] Config: added 'scan_ssid' value '1'
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5712] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5713] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.5714] Config: added 'psk' value '<hidden>'
Oct 11 11:25:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/221
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.6393] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:25:06 IQ138000 NetworkManager[403]: <info>  [1760181906.6397] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:25:14 IQ138000 wb-watchdog[15269]: [INFO] Interval #309 started. Waiting up to 60 seconds for error...
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:25:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:25:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:25:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:25:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:25:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:25:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:25:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:25:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:25:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:25:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:25:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:25:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:25:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:25:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:25:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:25:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:25:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:25:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:25:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:25:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:25:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:25:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:25:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:25:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:25:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:25:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:25:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:25:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:25:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:25:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:25:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:25:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:25:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:25:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:25:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:25:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:25:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:25:32 IQ138000 NetworkManager[403]: <warn>  [1760181932.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:25:32 IQ138000 NetworkManager[403]: <info>  [1760181932.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:25:32 IQ138000 NetworkManager[403]: <warn>  [1760181932.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:25:32 IQ138000 NetworkManager[403]: <info>  [1760181932.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:25:32 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:25:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/221
Oct 11 11:25:32 IQ138000 NetworkManager[403]: <info>  [1760181932.0744] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:25:32 IQ138000 NetworkManager[403]: <info>  [1760181932.0746] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:25:32 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:25:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:38 IQ138000 NetworkManager[403]: <info>  [1760181938.2831] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:25:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:26:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:26:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:26:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:26:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:26:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:26:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:26:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:26:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:26:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:26:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:26:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:26:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:26:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:26:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:26:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:26:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:26:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:26:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:26:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:26:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:26:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:26:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:26:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:26:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:26:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:26:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:26:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:26:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:26:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:26:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:26:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:26:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:26:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:26:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:26:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:26:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:26:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:26:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:14 IQ138000 wb-watchdog[15959]: [INFO] Interval #310 started. Waiting up to 60 seconds for error...
Oct 11 11:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:23 IQ138000 npm[3801]: [2025-10-11 11:26:23] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.18,"last_seen":1760181983610,"linkquality":94,"power_outage_count":48745,"temperature":27.05,"voltage":3025}'
Oct 11 11:26:23 IQ138000 npm[3801]: [2025-10-11 11:26:23] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.19,"last_seen":1760181983625,"linkquality":94,"power_outage_count":48745,"temperature":27.05,"voltage":3025}'
Oct 11 11:26:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760182163688,"cmd_timestamp_ms":1760181983688,"source":"regulation"}
Oct 11 11:26:23 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760182163688,"cmd_timestamp_ms":1760181983688,"source":"regulation"}
Oct 11 11:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:24 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 11:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:29 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 11:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:26:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:26:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:26:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:26:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:26:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:26:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:26:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:26:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:26:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:26:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:26:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:26:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:26:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:26:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:26:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:26:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:26:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:26:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:26:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:26:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:26:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:26:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:26:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:26:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:26:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:26:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:26:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:26:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:26:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:26:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:26:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:26:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:26:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:26:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:26:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:26:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.3776] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.3780] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.3786] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.3894] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.3920] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.3922] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4075] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4126] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4174] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4180] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4182] Config: added 'scan_ssid' value '1'
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4183] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4186] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:26:33 IQ138000 NetworkManager[403]: <info>  [1760181993.4188] Config: added 'psk' value '<hidden>'
Oct 11 11:26:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/222
Oct 11 11:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:36 IQ138000 NetworkManager[403]: <info>  [1760181996.5471] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:26:36 IQ138000 NetworkManager[403]: <info>  [1760181996.5477] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:26:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:26:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:26:59 IQ138000 NetworkManager[403]: <warn>  [1760182019.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:26:59 IQ138000 NetworkManager[403]: <info>  [1760182019.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:26:59 IQ138000 NetworkManager[403]: <warn>  [1760182019.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:26:59 IQ138000 NetworkManager[403]: <info>  [1760182019.0275] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:26:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/222
Oct 11 11:26:59 IQ138000 NetworkManager[403]: <info>  [1760182019.0848] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:26:59 IQ138000 NetworkManager[403]: <info>  [1760182019.0850] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:27:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:27:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:27:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:27:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:27:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:27:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:27:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:27:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:27:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:27:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:27:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:27:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:27:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:27:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:27:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:27:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:27:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:27:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:27:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:27:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:27:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:27:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:27:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:27:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:27:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:27:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:27:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:27:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:27:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:27:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:27:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:27:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:27:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:27:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:27:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:27:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:27:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:27:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:27:05 IQ138000 NetworkManager[403]: <info>  [1760182025.1093] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:27:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:14 IQ138000 wb-watchdog[16583]: [INFO] Interval #311 started. Waiting up to 60 seconds for error...
Oct 11 11:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:27:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:27:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:27:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:27:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:27:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:27:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:27:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:27:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:27:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:27:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:27:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:27:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:27:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:27:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:27:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:27:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:27:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:27:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:27:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:27:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:27:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:27:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:27:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:27:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:27:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:27:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:27:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:27:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:27:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:27:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:27:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:27:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:27:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:27:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:27:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:27:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:27:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:27:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:27:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L1, row count 7183, limit 7042
Oct 11 11:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:27:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:27:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.1953] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.1959] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.1966] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2034] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2061] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2063] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2155] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2175] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2196] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2200] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2201] Config: added 'scan_ssid' value '1'
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2202] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2203] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2204] Config: added 'psk' value '<hidden>'
Oct 11 11:28:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/223
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2951] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:28:00 IQ138000 NetworkManager[403]: <info>  [1760182080.2954] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:28:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:28:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:28:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:28:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:28:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:28:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:28:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:28:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:28:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:28:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:28:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:28:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:28:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:28:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:28:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:28:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:28:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:28:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:28:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:28:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:28:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:28:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:28:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:28:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:28:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:28:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:28:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:28:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:28:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:28:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:28:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:28:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:28:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:28:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:28:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:28:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:28:14 IQ138000 wb-watchdog[17282]: [INFO] Interval #312 started. Waiting up to 60 seconds for error...
Oct 11 11:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:25 IQ138000 NetworkManager[403]: <warn>  [1760182105.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:28:25 IQ138000 NetworkManager[403]: <info>  [1760182105.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:28:25 IQ138000 NetworkManager[403]: <warn>  [1760182105.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:28:25 IQ138000 NetworkManager[403]: <info>  [1760182105.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:28:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/223
Oct 11 11:28:25 IQ138000 NetworkManager[403]: <info>  [1760182105.0739] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:28:25 IQ138000 NetworkManager[403]: <info>  [1760182105.0741] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:28:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:30 IQ138000 NetworkManager[403]: <info>  [1760182110.9609] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:28:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:28:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:28:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:28:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:28:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:28:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:28:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:28:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:28:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:28:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:28:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:28:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:28:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:28:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:28:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:28:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:28:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:28:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:28:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:28:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:28:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:28:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:28:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:28:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:28:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:28:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:28:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:28:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:28:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:28:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:28:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:28:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:28:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:28:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:28:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:28:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:28:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:28:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:28:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:29:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:29:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:29:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:29:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:29:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:29:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:29:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:29:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:29:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:29:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:29:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:29:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:29:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:29:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:29:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:29:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:29:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:29:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:29:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:29:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:29:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:29:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:29:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:29:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:29:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:29:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:29:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:29:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:29:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:29:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:29:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:29:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:29:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:29:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:29:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:29:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:29:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:29:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:29:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:14 IQ138000 wb-watchdog[17902]: [INFO] Interval #313 started. Waiting up to 60 seconds for error...
Oct 11 11:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:25 IQ138000 NetworkManager[403]: <info>  [1760182165.9884] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:29:25 IQ138000 NetworkManager[403]: <info>  [1760182165.9889] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:29:25 IQ138000 NetworkManager[403]: <info>  [1760182165.9896] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:29:25 IQ138000 NetworkManager[403]: <info>  [1760182165.9953] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:29:25 IQ138000 NetworkManager[403]: <info>  [1760182165.9978] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:29:25 IQ138000 NetworkManager[403]: <info>  [1760182165.9980] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0075] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0094] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0112] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0115] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0115] Config: added 'scan_ssid' value '1'
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0116] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0117] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0118] Config: added 'psk' value '<hidden>'
Oct 11 11:29:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/224
Oct 11 11:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0889] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:29:26 IQ138000 NetworkManager[403]: <info>  [1760182166.0891] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:29:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:29:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:29:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:29:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:29:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:29:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:29:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:29:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:29:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:29:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:29:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:29:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:29:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:29:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:29:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:29:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:29:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:29:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:29:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:29:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:29:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:29:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:29:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:29:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:29:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:29:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:29:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:29:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:29:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:29:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:29:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:29:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:29:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:29:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:29:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:29:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:29:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:29:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:29:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:29:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:29:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L1, row count 7183, limit 7042
Oct 11 11:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:49 IQ138000 npm[3801]: [2025-10-11 11:29:49] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.63,"last_seen":1760182189613,"linkquality":98,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 11:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:51 IQ138000 NetworkManager[403]: <warn>  [1760182191.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:29:51 IQ138000 NetworkManager[403]: <info>  [1760182191.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:29:51 IQ138000 NetworkManager[403]: <warn>  [1760182191.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:29:51 IQ138000 NetworkManager[403]: <info>  [1760182191.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:29:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/224
Oct 11 11:29:51 IQ138000 NetworkManager[403]: <info>  [1760182191.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:29:51 IQ138000 NetworkManager[403]: <info>  [1760182191.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:56 IQ138000 NetworkManager[403]: <info>  [1760182196.7296] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:30:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:30:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:30:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:30:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:30:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:30:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:30:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:30:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:30:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:30:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:30:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:30:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:30:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:30:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:30:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:30:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:30:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:30:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:30:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:30:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:30:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:30:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:30:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:30:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:30:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:30:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:30:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:30:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:30:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:30:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:30:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:30:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:30:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:30:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:30:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:30:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:30:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 11:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:30:14 IQ138000 wb-watchdog[18604]: [INFO] Interval #314 started. Waiting up to 60 seconds for error...
Oct 11 11:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:30:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:30:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:30:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:30:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:30:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:30:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:30:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:30:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:30:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:30:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:30:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:30:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:30:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:30:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:30:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:30:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:30:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:30:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:30:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:30:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:30:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:30:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:30:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:30:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:30:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:30:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:30:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:30:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:30:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:30:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:30:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:30:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:30:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:30:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:30:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:30:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:30:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:30:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:30:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:30:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:30:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:30:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7636] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7642] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7648] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7704] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7724] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7726] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7847] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7869] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7889] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7894] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7895] Config: added 'scan_ssid' value '1'
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7896] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7897] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.7899] Config: added 'psk' value '<hidden>'
Oct 11 11:30:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/225
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.8584] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:30:51 IQ138000 NetworkManager[403]: <info>  [1760182251.8587] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:30:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L1, row count 7183, limit 7042
Oct 11 11:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:30:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:30:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:31:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:31:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:31:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:31:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:31:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:31:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:31:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:31:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:31:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:31:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:31:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:31:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:31:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:31:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:31:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:31:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:31:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:31:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:31:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:31:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:31:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:31:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:31:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:31:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:31:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:31:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:31:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:31:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:31:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:31:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:31:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:31:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:31:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:31:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:31:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:31:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:31:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:31:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:31:14 IQ138000 wb-watchdog[19216]: [INFO] Interval #315 started. Waiting up to 60 seconds for error...
Oct 11 11:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:31:17 IQ138000 NetworkManager[403]: <warn>  [1760182277.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:31:17 IQ138000 NetworkManager[403]: <info>  [1760182277.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:31:17 IQ138000 NetworkManager[403]: <warn>  [1760182277.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:31:17 IQ138000 NetworkManager[403]: <info>  [1760182277.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:31:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/225
Oct 11 11:31:17 IQ138000 NetworkManager[403]: <info>  [1760182277.0733] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:31:17 IQ138000 NetworkManager[403]: <info>  [1760182277.0735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4886 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:31:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:31:23 IQ138000 NetworkManager[403]: <info>  [1760182283.5258] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:31:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:31:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:31:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:31:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:31:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:31:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:31:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:31:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:31:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:31:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:31:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:31:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:31:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:31:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:31:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:31:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:31:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:31:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:31:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:31:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:31:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:31:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:31:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:31:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:31:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:31:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:31:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:31:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:31:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:31:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:31:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:31:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:31:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:31:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:31:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:31:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:31:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:31:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:32:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:32:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:32:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:32:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:32:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:32:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:32:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:32:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:32:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:32:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:32:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:32:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:32:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:32:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:32:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:32:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:32:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:32:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:32:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:32:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:32:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:32:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:32:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:32:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:32:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:32:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:32:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:32:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:32:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:32:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:32:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:32:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:32:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:32:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:32:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:32:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:32:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:32:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:32:14 IQ138000 wb-watchdog[19916]: [INFO] Interval #316 started. Waiting up to 60 seconds for error...
Oct 11 11:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:32:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:32:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.5853] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.5879] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.5892] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.5964] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.5985] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.5988] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6086] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6126] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6146] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6150] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6151] Config: added 'scan_ssid' value '1'
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6152] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6153] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6154] Config: added 'psk' value '<hidden>'
Oct 11 11:32:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/226
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6939] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:32:18 IQ138000 NetworkManager[403]: <info>  [1760182338.6941] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:28 IQ138000 npm[3801]: [2025-10-11 11:32:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":44.87,"last_seen":1760182348845,"linkquality":51,"power_outage_count":25795,"pressure":992.3,"temperature":23.51,"voltage":2995}'
Oct 11 11:32:28 IQ138000 npm[3801]: [2025-10-11 11:32:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.38,"last_seen":1760182348855,"linkquality":51,"power_outage_count":25795,"pressure":992.3,"temperature":23.51,"voltage":2995}'
Oct 11 11:32:28 IQ138000 npm[3801]: [2025-10-11 11:32:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.38,"last_seen":1760182348874,"linkquality":51,"power_outage_count":25795,"pressure":992.5,"temperature":23.51,"voltage":2995}'
Oct 11 11:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:32:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:32:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:32:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:32:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:32:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:32:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:32:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:32:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:32:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:32:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:32:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:32:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:32:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:32:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:32:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:32:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:32:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:32:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:32:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:32:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:32:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:32:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:32:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:32:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:32:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:32:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:32:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:32:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:32:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:32:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:32:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:32:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:32:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:32:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:32:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:32:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:44 IQ138000 NetworkManager[403]: <warn>  [1760182364.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:32:44 IQ138000 NetworkManager[403]: <info>  [1760182364.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:32:44 IQ138000 NetworkManager[403]: <warn>  [1760182364.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:32:44 IQ138000 NetworkManager[403]: <info>  [1760182364.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:32:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:32:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/226
Oct 11 11:32:44 IQ138000 NetworkManager[403]: <info>  [1760182364.0678] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:32:44 IQ138000 NetworkManager[403]: <info>  [1760182364.0680] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:32:50 IQ138000 NetworkManager[403]: <info>  [1760182370.3290] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:32:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:32:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:33:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:33:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:33:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:33:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:33:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:33:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:33:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:33:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:33:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:33:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:33:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:33:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:33:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:33:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:33:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:33:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:33:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:33:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:33:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:33:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:33:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:33:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:33:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:33:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:33:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:33:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:33:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:33:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:33:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:33:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:33:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:33:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:33:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:33:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:33:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:33:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:33:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:14 IQ138000 wb-watchdog[20532]: [INFO] Interval #317 started. Waiting up to 60 seconds for error...
Oct 11 11:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:33:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:33:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:33:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:33:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:33:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:33:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:33:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:33:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:33:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:33:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:33:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:33:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:33:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:33:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:33:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:33:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:33:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:33:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:33:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:33:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:33:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:33:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:33:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:33:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:33:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:33:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:33:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:33:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:33:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:33:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:33:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:33:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:33:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:33:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:33:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:33:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:33:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:33:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:33:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L2, row count 7183, limit 7042
Oct 11 11:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:33:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7227] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7231] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7236] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7300] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7322] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7323] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7453] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7527] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7600] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7618] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7628] Config: added 'scan_ssid' value '1'
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7638] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7646] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:33:45 IQ138000 NetworkManager[403]: <info>  [1760182425.7647] Config: added 'psk' value '<hidden>'
Oct 11 11:33:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/227
Oct 11 11:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:33:48 IQ138000 NetworkManager[403]: <info>  [1760182428.8475] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:33:48 IQ138000 NetworkManager[403]: <info>  [1760182428.8477] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:33:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:33:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:34:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:34:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:34:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:34:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:34:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:34:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:34:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:34:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:34:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:34:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:34:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:34:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:34:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:34:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:34:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:34:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:34:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:34:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:34:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:34:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:34:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:34:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:34:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:34:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:34:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:34:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:34:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:34:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:34:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:34:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:34:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:34:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:34:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:34:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:34:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:34:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:34:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:11 IQ138000 NetworkManager[403]: <warn>  [1760182451.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:34:11 IQ138000 NetworkManager[403]: <info>  [1760182451.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:34:11 IQ138000 NetworkManager[403]: <warn>  [1760182451.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:34:11 IQ138000 NetworkManager[403]: <info>  [1760182451.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:34:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/227
Oct 11 11:34:11 IQ138000 NetworkManager[403]: <info>  [1760182451.0688] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:34:11 IQ138000 NetworkManager[403]: <info>  [1760182451.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:14 IQ138000 wb-watchdog[21234]: [INFO] Interval #318 started. Waiting up to 60 seconds for error...
Oct 11 11:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:17 IQ138000 NetworkManager[403]: <info>  [1760182457.6667] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:34:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:34:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:34:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:34:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:34:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:34:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:34:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:34:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:34:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:34:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:34:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:34:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:34:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:34:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:34:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:34:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:34:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:34:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:34:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:34:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:34:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:34:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:34:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:34:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:34:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:34:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:34:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:34:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:34:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:34:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:34:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:34:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:34:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:34:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:34:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:34:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:34:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:34:38 IQ138000 systemd[1]: Starting Daily apt download activities...
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 11:34:42 IQ138000 systemd[1]: apt-daily.service: Succeeded.
Oct 11 11:34:42 IQ138000 systemd[1]: Finished Daily apt download activities.
Oct 11 11:34:42 IQ138000 systemd[1]: apt-daily.service: Consumed 3.403s CPU time.
Oct 11 11:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 11:34:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 11:34:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 11:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:34:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:34:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:35:01 IQ138000 CRON[21711]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:35:01 IQ138000 CRON[21721]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 11:35:01 IQ138000 CRON[21711]: pam_unix(cron:session): session closed for user root
Oct 11 11:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:35:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:35:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:35:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:35:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:35:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:35:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:35:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:35:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:35:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:35:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:35:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:35:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:35:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:35:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:35:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:35:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:35:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:35:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:35:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:35:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:35:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:35:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:35:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:35:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:35:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:35:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:35:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:35:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:35:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:35:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:35:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:35:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:35:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:35:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:35:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:35:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:35:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:35:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8215] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8256] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8274] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8342] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8360] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8362] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8480] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8510] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8549] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8553] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8554] Config: added 'scan_ssid' value '1'
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8555] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8556] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.8557] Config: added 'psk' value '<hidden>'
Oct 11 11:35:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/228
Oct 11 11:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.9391] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:35:12 IQ138000 NetworkManager[403]: <info>  [1760182512.9393] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-watchdog[21915]: [INFO] Interval #319 started. Waiting up to 60 seconds for error...
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:35:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:35:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:35:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:35:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:35:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:35:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:35:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:35:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:35:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:35:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:35:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:35:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:35:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:35:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:35:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:35:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:35:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:35:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:35:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:35:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:35:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:35:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:35:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:35:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:35:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:35:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:35:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:35:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:35:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:35:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:35:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:35:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:35:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:35:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:35:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:35:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L1, row count 7183, limit 7042
Oct 11 11:35:38 IQ138000 NetworkManager[403]: <warn>  [1760182538.0205] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:35:38 IQ138000 NetworkManager[403]: <info>  [1760182538.0207] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:35:38 IQ138000 NetworkManager[403]: <warn>  [1760182538.0238] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:35:38 IQ138000 NetworkManager[403]: <info>  [1760182538.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:35:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/228
Oct 11 11:35:38 IQ138000 NetworkManager[403]: <info>  [1760182538.0730] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:35:38 IQ138000 NetworkManager[403]: <info>  [1760182538.0731] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:44 IQ138000 NetworkManager[403]: <info>  [1760182544.5955] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:35:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:35:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:36:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:36:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:36:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:36:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:36:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:36:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:36:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:36:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:36:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:36:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:36:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:36:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:36:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:36:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:36:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:36:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:36:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:36:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:36:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:36:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:36:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:36:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:36:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:36:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:36:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:36:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:36:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:36:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:36:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:36:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:36:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:36:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:36:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:36:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:36:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:36:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:36:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:36:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:14 IQ138000 wb-watchdog[22601]: [INFO] Interval #320 started. Waiting up to 60 seconds for error...
Oct 11 11:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:36:21 IQ138000 npm[3801]: [2025-10-11 11:36:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.38,"last_seen":1760182581484,"linkquality":65,"power_outage_count":25795,"pressure":992.5,"temperature":23.45,"voltage":2995}'
Oct 11 11:36:21 IQ138000 npm[3801]: [2025-10-11 11:36:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.57,"last_seen":1760182581496,"linkquality":69,"power_outage_count":25795,"pressure":992.5,"temperature":23.45,"voltage":2995}'
Oct 11 11:36:21 IQ138000 npm[3801]: [2025-10-11 11:36:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.57,"last_seen":1760182581520,"linkquality":69,"power_outage_count":25795,"pressure":992.2,"temperature":23.45,"voltage":2995}'
Oct 11 11:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:36:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:31 IQ138000 npm[3801]: [2025-10-11 11:36:31] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.57,"last_seen":1760182591894,"linkquality":61,"power_outage_count":25795,"pressure":992.2,"temperature":23.48,"voltage":2995}'
Oct 11 11:36:31 IQ138000 npm[3801]: [2025-10-11 11:36:31] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.42,"last_seen":1760182591908,"linkquality":61,"power_outage_count":25795,"pressure":992.2,"temperature":23.48,"voltage":2995}'
Oct 11 11:36:31 IQ138000 npm[3801]: [2025-10-11 11:36:31] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.42,"last_seen":1760182591908,"linkquality":61,"power_outage_count":25795,"pressure":992.6,"temperature":23.48,"voltage":2995}'
Oct 11 11:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:36:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:36:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:36:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:36:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:36:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:36:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:36:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:36:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:36:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:36:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:36:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:36:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:36:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:36:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:36:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:36:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:36:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:36:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:36:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:36:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:36:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:36:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:36:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:36:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:36:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:36:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:36:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:36:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:36:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:36:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:36:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:36:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:36:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:36:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:36:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:36:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0058] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0065] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0073] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0136] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0154] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0155] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0292] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0339] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0363] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0369] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0370] Config: added 'scan_ssid' value '1'
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0371] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0373] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.0374] Config: added 'psk' value '<hidden>'
Oct 11 11:36:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/229
Oct 11 11:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.1139] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:36:40 IQ138000 NetworkManager[403]: <info>  [1760182600.1142] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:36:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:36:52 IQ138000 npm[3801]: [2025-10-11 11:36:52] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.42,"last_seen":1760182612423,"linkquality":87,"power_outage_count":25795,"pressure":992.6,"temperature":23.46,"voltage":2995}'
Oct 11 11:36:52 IQ138000 npm[3801]: [2025-10-11 11:36:52] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.62,"last_seen":1760182612460,"linkquality":83,"power_outage_count":25795,"pressure":992.6,"temperature":23.46,"voltage":2995}'
Oct 11 11:36:52 IQ138000 npm[3801]: [2025-10-11 11:36:52] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.62,"last_seen":1760182612460,"linkquality":83,"power_outage_count":25795,"pressure":992.3,"temperature":23.46,"voltage":2995}'
Oct 11 11:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L3, row count 7183, limit 7042
Oct 11 11:36:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L2, row count 7183, limit 7042
Oct 11 11:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:37:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:37:02 IQ138000 npm[3801]: [2025-10-11 11:37:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.62,"last_seen":1760182622821,"linkquality":69,"power_outage_count":25795,"pressure":992.4,"temperature":23.46,"voltage":2995}'
Oct 11 11:37:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:37:05 IQ138000 NetworkManager[403]: <warn>  [1760182625.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:37:05 IQ138000 NetworkManager[403]: <info>  [1760182625.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:37:05 IQ138000 NetworkManager[403]: <warn>  [1760182625.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:37:05 IQ138000 NetworkManager[403]: <info>  [1760182625.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:37:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/229
Oct 11 11:37:05 IQ138000 NetworkManager[403]: <info>  [1760182625.0634] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:37:05 IQ138000 NetworkManager[403]: <info>  [1760182625.0636] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:37:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:37:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:37:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:37:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:37:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:37:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:37:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:37:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:37:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:37:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:37:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:37:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:37:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:37:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:37:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:37:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:37:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:37:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:37:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:37:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:37:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:37:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:37:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:37:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:37:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:37:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:37:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:37:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:37:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:37:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:37:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:37:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:37:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:37:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:37:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:37:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:10 IQ138000 NetworkManager[403]: <info>  [1760182630.8036] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:37:13 IQ138000 npm[3801]: [2025-10-11 11:37:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.62,"last_seen":1760182633648,"linkquality":61,"power_outage_count":25795,"pressure":992.4,"temperature":23.44,"voltage":2995}'
Oct 11 11:37:13 IQ138000 npm[3801]: [2025-10-11 11:37:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.93,"last_seen":1760182633659,"linkquality":61,"power_outage_count":25795,"pressure":992.4,"temperature":23.44,"voltage":2995}'
Oct 11 11:37:13 IQ138000 npm[3801]: [2025-10-11 11:37:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.93,"last_seen":1760182633676,"linkquality":58,"power_outage_count":25795,"pressure":992.6,"temperature":23.44,"voltage":2995}'
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:37:14 IQ138000 wb-watchdog[23228]: [INFO] Interval #321 started. Waiting up to 60 seconds for error...
Oct 11 11:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:37:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:37:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 11:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:37:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:37:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:37:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:37:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:37:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:37:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:37:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:37:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:37:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:37:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:37:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:37:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:37:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:37:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:37:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:37:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:37:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:37:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:37:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:37:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:37:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:37:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:37:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:37:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:37:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:37:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:37:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:37:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:37:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:37:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:37:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:37:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:37:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:37:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:37:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:37:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:44 IQ138000 npm[3801]: [2025-10-11 11:37:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.93,"last_seen":1760182664251,"linkquality":58,"power_outage_count":25795,"pressure":992.6,"temperature":23.46,"voltage":2995}'
Oct 11 11:37:44 IQ138000 npm[3801]: [2025-10-11 11:37:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":48.02,"last_seen":1760182664268,"linkquality":58,"power_outage_count":25795,"pressure":992.6,"temperature":23.46,"voltage":2995}'
Oct 11 11:37:44 IQ138000 npm[3801]: [2025-10-11 11:37:44] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":48.02,"last_seen":1760182664268,"linkquality":58,"power_outage_count":25795,"pressure":992.2,"temperature":23.46,"voltage":2995}'
Oct 11 11:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:37:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:37:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:01 IQ138000 CRON[23728]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:38:01 IQ138000 CRON[23733]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 11:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:38:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:38:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:38:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:38:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:38:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:38:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:38:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:38:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:38:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:38:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:38:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:38:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:38:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:38:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:38:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:38:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:38:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:38:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:38:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:38:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:38:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:38:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:38:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:38:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:38:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:38:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:38:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:38:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:38:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:38:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:38:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:38:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:38:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:38:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8731] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8735] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8742] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8827] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8849] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8851] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.8983] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9019] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9040] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9044] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9046] Config: added 'scan_ssid' value '1'
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9047] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9050] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9051] Config: added 'psk' value '<hidden>'
Oct 11 11:38:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/230
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9750] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:38:05 IQ138000 NetworkManager[403]: <info>  [1760182685.9752] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:07 IQ138000 sSMTP[23755]: Unable to locate mail
Oct 11 11:38:07 IQ138000 sSMTP[23755]: Cannot open mail:25
Oct 11 11:38:07 IQ138000 cron[23755]: sendmail: Cannot open mail:25
Oct 11 11:38:07 IQ138000 CRON[23728]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 11:38:07 IQ138000 CRON[23728]: pam_unix(cron:session): session closed for user root
Oct 11 11:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:38:14 IQ138000 wb-watchdog[23945]: [INFO] Interval #322 started. Waiting up to 60 seconds for error...
Oct 11 11:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:38:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:31 IQ138000 NetworkManager[403]: <warn>  [1760182711.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:38:31 IQ138000 NetworkManager[403]: <info>  [1760182711.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:38:31 IQ138000 NetworkManager[403]: <warn>  [1760182711.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:38:31 IQ138000 NetworkManager[403]: <info>  [1760182711.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:38:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/230
Oct 11 11:38:31 IQ138000 NetworkManager[403]: <info>  [1760182711.0689] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:38:31 IQ138000 NetworkManager[403]: <info>  [1760182711.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:38:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:38:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:38:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:38:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:38:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:38:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:38:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:38:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:38:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:38:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:38:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:38:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:38:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:38:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:38:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:38:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:38:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:38:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:38:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:38:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:38:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:38:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:38:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:38:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:38:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:38:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:38:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:38:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:38:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:38:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:38:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:38:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:38:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:38:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:38:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:38:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:38:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:38:36 IQ138000 NetworkManager[403]: <info>  [1760182716.6472] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:38:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:38:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:38:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:38:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:39:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:39:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:39:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:39:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:39:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:39:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:39:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:39:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:39:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:39:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:39:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:39:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:39:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:39:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:39:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:39:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:39:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:39:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:39:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:39:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:39:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:39:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:39:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:39:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:39:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:39:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:39:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:39:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:39:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:39:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:39:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:39:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:39:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:39:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:39:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:39:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:39:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:39:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:14 IQ138000 wb-watchdog[24551]: [INFO] Interval #323 started. Waiting up to 60 seconds for error...
Oct 11 11:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:15 IQ138000 npm[3801]: [2025-10-11 11:39:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":48.02,"last_seen":1760182755478,"linkquality":69,"power_outage_count":25795,"pressure":992.2,"temperature":23.45,"voltage":2995}'
Oct 11 11:39:15 IQ138000 npm[3801]: [2025-10-11 11:39:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.82,"last_seen":1760182755500,"linkquality":69,"power_outage_count":25795,"pressure":992.2,"temperature":23.45,"voltage":2995}'
Oct 11 11:39:15 IQ138000 npm[3801]: [2025-10-11 11:39:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.82,"last_seen":1760182755523,"linkquality":65,"power_outage_count":25795,"pressure":992.6,"temperature":23.45,"voltage":2995}'
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:25 IQ138000 npm[3801]: [2025-10-11 11:39:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.82,"last_seen":1760182765892,"linkquality":83,"power_outage_count":25795,"pressure":992.6,"temperature":23.44,"voltage":2995}'
Oct 11 11:39:25 IQ138000 npm[3801]: [2025-10-11 11:39:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.95,"last_seen":1760182765905,"linkquality":83,"power_outage_count":25795,"pressure":992.6,"temperature":23.44,"voltage":2995}'
Oct 11 11:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:26 IQ138000 npm[3801]: [2025-10-11 11:39:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.95,"last_seen":1760182765966,"linkquality":83,"power_outage_count":25795,"pressure":992.3,"temperature":23.44,"voltage":2995}'
Oct 11 11:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8287] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8292] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8299] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8360] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8381] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8383] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8484] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8507] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8526] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8530] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8531] Config: added 'scan_ssid' value '1'
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8533] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8534] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.8535] Config: added 'psk' value '<hidden>'
Oct 11 11:39:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/231
Oct 11 11:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.9251] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:39:31 IQ138000 NetworkManager[403]: <info>  [1760182771.9253] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:39:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:39:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:39:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:39:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:39:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:39:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:39:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:39:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:39:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:39:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:39:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:39:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:39:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:39:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:39:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:39:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:39:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:39:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:39:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:39:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:39:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:39:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:39:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:39:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:39:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:39:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:39:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:39:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:39:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:39:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:39:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:39:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:39:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:39:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:39:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:39:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:39:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:39:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:39:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:39:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:39:57 IQ138000 NetworkManager[403]: <warn>  [1760182797.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:39:57 IQ138000 NetworkManager[403]: <info>  [1760182797.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:39:57 IQ138000 NetworkManager[403]: <warn>  [1760182797.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:39:57 IQ138000 NetworkManager[403]: <info>  [1760182797.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:39:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/231
Oct 11 11:39:57 IQ138000 NetworkManager[403]: <info>  [1760182797.0735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:39:57 IQ138000 NetworkManager[403]: <info>  [1760182797.0737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:40:03 IQ138000 NetworkManager[403]: <info>  [1760182803.5649] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:40:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:40:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:40:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:40:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:40:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:40:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:40:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:40:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:40:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:40:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:40:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:40:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:40:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:40:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:40:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:40:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:40:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:40:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:40:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:40:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:40:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:40:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:40:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:40:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:40:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:40:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:40:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:40:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:40:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:40:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:40:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:40:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:40:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:40:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:40:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:40:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:40:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:40:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:40:14 IQ138000 wb-watchdog[25263]: [INFO] Interval #324 started. Waiting up to 60 seconds for error...
Oct 11 11:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 11:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 11:40:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 11:40:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 11:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:40:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:40:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:40:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:40:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:40:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:40:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:40:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:40:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:40:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:40:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:40:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:40:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:40:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:40:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:40:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:40:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:40:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:40:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:40:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:40:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:40:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:40:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:40:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:40:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:40:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:40:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:40:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:40:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:40:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:40:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:40:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:40:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:40:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:40:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:40:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:40:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:40:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.6824] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.6829] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.6835] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.6891] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.6915] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.6917] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7002] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7024] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7046] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7050] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7052] Config: added 'scan_ssid' value '1'
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7053] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7054] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7055] Config: added 'psk' value '<hidden>'
Oct 11 11:40:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/232
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7769] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:40:58 IQ138000 NetworkManager[403]: <info>  [1760182858.7785] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:41:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:41:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:41:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:41:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:41:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:41:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:41:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:41:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:41:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:41:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:41:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:41:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:41:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:41:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:41:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:41:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:41:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:41:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:41:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:41:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:41:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:41:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:41:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:41:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:41:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:41:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:41:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:41:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:41:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:41:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:41:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:41:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:41:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:41:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:41:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:41:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:41:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:14 IQ138000 wb-watchdog[25857]: [INFO] Interval #325 started. Waiting up to 60 seconds for error...
Oct 11 11:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:41:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:24 IQ138000 NetworkManager[403]: <warn>  [1760182884.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:41:24 IQ138000 NetworkManager[403]: <info>  [1760182884.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:41:24 IQ138000 NetworkManager[403]: <warn>  [1760182884.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:41:24 IQ138000 NetworkManager[403]: <info>  [1760182884.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:41:24 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:41:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/232
Oct 11 11:41:24 IQ138000 NetworkManager[403]: <info>  [1760182884.0647] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:41:24 IQ138000 NetworkManager[403]: <info>  [1760182884.0650] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:24 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:30 IQ138000 NetworkManager[403]: <info>  [1760182890.4809] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:41:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:41:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:41:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:41:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:41:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:41:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:41:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:41:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:41:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:41:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:41:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:41:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:41:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:41:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:41:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:41:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:41:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:41:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:41:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:41:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:41:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:41:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:41:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:41:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:41:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:41:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:41:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:41:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:41:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:41:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:41:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:41:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:41:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:41:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:41:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:41:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:41:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:41:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:41:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:41:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:42:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:42:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:42:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:42:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:42:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:42:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:42:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:42:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:42:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:42:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:42:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:42:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:42:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:42:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:42:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:42:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:42:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:42:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:42:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:42:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:42:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:42:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:42:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:42:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:42:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:42:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:42:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:42:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:42:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:42:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:42:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:42:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:42:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:42:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:42:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:14 IQ138000 wb-watchdog[26573]: [INFO] Interval #326 started. Waiting up to 60 seconds for error...
Oct 11 11:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5076] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5093] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5110] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5188] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5208] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5210] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5322] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5343] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5364] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5367] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5368] Config: added 'scan_ssid' value '1'
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5369] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5370] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:42:25 IQ138000 NetworkManager[403]: <info>  [1760182945.5371] Config: added 'psk' value '<hidden>'
Oct 11 11:42:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/233
Oct 11 11:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:27 IQ138000 NetworkManager[403]: <info>  [1760182947.6162] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:42:27 IQ138000 NetworkManager[403]: <info>  [1760182947.6164] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:42:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:42:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:42:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:42:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:42:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:42:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:42:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:42:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:42:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:42:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:42:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:42:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:42:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:42:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:42:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:42:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:42:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:42:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:42:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:42:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:42:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:42:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:42:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:42:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:42:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:42:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:42:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:42:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:42:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:42:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:42:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:42:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:42:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:42:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:42:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:42:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:42:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:42:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:42:51 IQ138000 NetworkManager[403]: <warn>  [1760182971.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:42:51 IQ138000 NetworkManager[403]: <info>  [1760182971.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:42:51 IQ138000 NetworkManager[403]: <warn>  [1760182971.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:42:51 IQ138000 NetworkManager[403]: <info>  [1760182971.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:42:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/233
Oct 11 11:42:51 IQ138000 NetworkManager[403]: <info>  [1760182971.0753] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:42:51 IQ138000 NetworkManager[403]: <info>  [1760182971.0755] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:42:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:42:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L3, row count 7183, limit 7042
Oct 11 11:42:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L1, row count 7183, limit 7042
Oct 11 11:42:57 IQ138000 NetworkManager[403]: <info>  [1760182977.3026] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:43:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:43:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:43:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:43:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:43:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:43:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:43:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:43:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:43:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:43:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:43:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:43:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:43:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:43:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:43:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:43:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:43:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:43:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:43:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:43:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:43:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:43:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:43:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:43:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:43:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:43:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:43:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:43:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:43:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:43:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:43:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:43:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:43:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:43:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:43:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:43:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:43:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:43:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:14 IQ138000 wb-watchdog[27193]: [INFO] Interval #327 started. Waiting up to 60 seconds for error...
Oct 11 11:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:43:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:43:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:43:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:43:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:43:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:43:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:43:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:43:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:43:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:43:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:43:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:43:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:43:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:43:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:43:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:43:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:43:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:43:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:43:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:43:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:43:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:43:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:43:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:43:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:43:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:43:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:43:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:43:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:43:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:43:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:43:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:43:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:43:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:43:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:43:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:43:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:43:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2694] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2700] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2706] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2804] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2829] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2830] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2925] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2953] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2974] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2978] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2979] Config: added 'scan_ssid' value '1'
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2980] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2982] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.2983] Config: added 'psk' value '<hidden>'
Oct 11 11:43:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/234
Oct 11 11:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.3951] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:43:52 IQ138000 NetworkManager[403]: <info>  [1760183032.3953] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:43:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:43:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:44:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:44:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:44:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:44:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:44:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:44:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:44:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:44:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:44:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:44:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:44:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:44:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:44:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:44:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:44:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:44:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:44:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:44:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:44:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:44:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:44:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:44:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:44:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:44:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:44:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:44:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:44:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:44:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:44:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:44:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:44:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:44:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:44:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:44:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:44:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:44:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:44:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:44:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:14 IQ138000 wb-watchdog[27875]: [INFO] Interval #328 started. Waiting up to 60 seconds for error...
Oct 11 11:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:18 IQ138000 NetworkManager[403]: <warn>  [1760183058.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:44:18 IQ138000 NetworkManager[403]: <info>  [1760183058.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:44:18 IQ138000 NetworkManager[403]: <warn>  [1760183058.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:44:18 IQ138000 NetworkManager[403]: <info>  [1760183058.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:44:18 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:44:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/234
Oct 11 11:44:18 IQ138000 NetworkManager[403]: <info>  [1760183058.0688] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:44:18 IQ138000 NetworkManager[403]: <info>  [1760183058.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:44:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:44:18 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:24 IQ138000 NetworkManager[403]: <info>  [1760183064.1096] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:44:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:44:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:44:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:44:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:44:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:44:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:44:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:44:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:44:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:44:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:44:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:44:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:44:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:44:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:44:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:44:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:44:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:44:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:44:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:44:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:44:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:44:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:44:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:44:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:44:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:44:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:44:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:44:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:44:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:44:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:44:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:44:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:44:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:44:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:44:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:44:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:44:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:44:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:45:01 IQ138000 CRON[28319]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:45:01 IQ138000 CRON[28323]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 11:45:01 IQ138000 CRON[28319]: pam_unix(cron:session): session closed for user root
Oct 11 11:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:45:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:45:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:45:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:45:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:45:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:45:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:45:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:45:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:45:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:45:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:45:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:45:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:45:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:45:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:45:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:45:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:45:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:45:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:45:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:45:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:45:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:45:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:45:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:45:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:45:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:45:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:45:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:45:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:45:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:45:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:45:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:45:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:45:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:45:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:45:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:45:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:45:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:14 IQ138000 wb-watchdog[28517]: [INFO] Interval #329 started. Waiting up to 60 seconds for error...
Oct 11 11:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1549] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1554] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1561] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1684] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1779] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1797] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1920] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1964] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1984] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1988] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1989] Config: added 'scan_ssid' value '1'
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1990] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1993] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:45:19 IQ138000 NetworkManager[403]: <info>  [1760183119.1994] Config: added 'psk' value '<hidden>'
Oct 11 11:45:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/235
Oct 11 11:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:23 IQ138000 NetworkManager[403]: <info>  [1760183123.2832] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:45:23 IQ138000 NetworkManager[403]: <info>  [1760183123.2834] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:45:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:45:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:45:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:45:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:45:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:45:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:45:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:45:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:45:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:45:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:45:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:45:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:45:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:45:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:45:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:45:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:45:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:45:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:45:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:45:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:45:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:45:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:45:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:45:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:45:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:45:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:45:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:45:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:45:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:45:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:45:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:45:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:45:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:45:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:45:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:45:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:45:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:45:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:45:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:44 IQ138000 NetworkManager[403]: <warn>  [1760183144.0226] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:45:44 IQ138000 NetworkManager[403]: <info>  [1760183144.0229] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:45:44 IQ138000 NetworkManager[403]: <warn>  [1760183144.0342] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:45:44 IQ138000 NetworkManager[403]: <info>  [1760183144.0350] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:45:44 IQ138000 NetworkManager[403]: <info>  [1760183144.0352] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:45:44 IQ138000 NetworkManager[403]: <info>  [1760183144.0371] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:45:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/235
Oct 11 11:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:45:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:45:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:45:49 IQ138000 NetworkManager[403]: <info>  [1760183149.8720] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:46:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:46:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:46:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:46:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:46:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:46:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:46:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:46:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:46:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:46:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:46:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:46:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:46:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:46:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:46:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:46:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:46:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:46:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:46:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:46:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:46:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:46:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:46:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:46:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:46:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:46:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:46:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:46:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:46:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:46:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:46:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:46:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:46:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:46:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:46:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:46:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:46:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:46:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:46:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:14 IQ138000 wb-watchdog[29197]: [INFO] Interval #330 started. Waiting up to 60 seconds for error...
Oct 11 11:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:46:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:46:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:46:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:46:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:46:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:46:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:46:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:46:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:46:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:46:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:46:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:46:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:46:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:46:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:46:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:46:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:46:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:46:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:46:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:46:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:46:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:46:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:46:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:46:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:46:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:46:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:46:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:46:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:46:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:46:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:46:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:46:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:46:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:46:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:46:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:46:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:46:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:46:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:44 IQ138000 NetworkManager[403]: <info>  [1760183204.9819] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:46:44 IQ138000 NetworkManager[403]: <info>  [1760183204.9823] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:46:44 IQ138000 NetworkManager[403]: <info>  [1760183204.9828] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:46:44 IQ138000 NetworkManager[403]: <info>  [1760183204.9929] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:46:44 IQ138000 NetworkManager[403]: <info>  [1760183204.9956] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:46:44 IQ138000 NetworkManager[403]: <info>  [1760183204.9970] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0087] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0122] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0141] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0144] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0145] Config: added 'scan_ssid' value '1'
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0146] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0147] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0148] Config: added 'psk' value '<hidden>'
Oct 11 11:46:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/236
Oct 11 11:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0937] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:46:45 IQ138000 NetworkManager[403]: <info>  [1760183205.0939] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:46:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:46:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:47:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:47:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:47:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:47:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:47:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:47:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:47:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:47:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:47:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:47:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:47:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:47:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:47:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:47:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:47:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:47:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:47:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:47:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:47:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:47:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:47:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:47:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:47:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:47:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:47:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:47:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:47:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:47:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:47:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:47:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:47:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:47:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:47:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:47:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:47:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:47:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:47:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:47:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:10 IQ138000 NetworkManager[403]: <warn>  [1760183230.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:47:10 IQ138000 NetworkManager[403]: <info>  [1760183230.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:47:10 IQ138000 NetworkManager[403]: <warn>  [1760183230.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:47:10 IQ138000 NetworkManager[403]: <info>  [1760183230.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:47:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/236
Oct 11 11:47:10 IQ138000 NetworkManager[403]: <info>  [1760183230.0678] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:47:10 IQ138000 NetworkManager[403]: <info>  [1760183230.0680] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:47:14 IQ138000 wb-watchdog[29823]: [INFO] Interval #331 started. Waiting up to 60 seconds for error...
Oct 11 11:47:15 IQ138000 NetworkManager[403]: <info>  [1760183235.7275] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:47:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:47:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:47:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:47:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:47:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:47:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:47:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:47:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:47:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:47:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:47:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:47:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:47:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:47:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:47:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:47:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:47:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:47:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:47:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:47:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:47:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:47:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:47:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:47:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:47:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:47:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:47:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:47:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:47:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:47:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:47:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:47:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:47:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:47:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:47:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:47:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:47:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:47:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:47:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:47:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:47:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:48:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:48:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:48:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:48:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:48:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:48:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:48:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:48:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:48:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:48:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:48:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:48:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:48:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:48:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:48:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:48:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:48:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:48:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:48:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:48:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:48:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:48:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:48:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:48:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:48:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:48:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:48:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:48:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:48:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:48:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:48:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:48:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:48:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:48:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:48:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:48:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:48:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:48:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:48:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.7909] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.7933] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.7947] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8023] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8046] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8048] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8155] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8178] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8213] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8228] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8236] Config: added 'scan_ssid' value '1'
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8239] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8242] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.8244] Config: added 'psk' value '<hidden>'
Oct 11 11:48:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/237
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.9030] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:48:10 IQ138000 NetworkManager[403]: <info>  [1760183290.9032] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:48:14 IQ138000 npm[3801]: [2025-10-11 11:48:14] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.58,"last_seen":1760183294099,"linkquality":29,"power_outage_count":35250,"temperature":24.19,"voltage":3075}'
Oct 11 11:48:14 IQ138000 wb-watchdog[30532]: [INFO] Interval #332 started. Waiting up to 60 seconds for error...
Oct 11 11:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:48:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:48:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:48:36 IQ138000 NetworkManager[403]: <warn>  [1760183316.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:48:36 IQ138000 NetworkManager[403]: <info>  [1760183316.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:48:36 IQ138000 NetworkManager[403]: <warn>  [1760183316.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:48:36 IQ138000 NetworkManager[403]: <info>  [1760183316.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:48:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/237
Oct 11 11:48:36 IQ138000 NetworkManager[403]: <info>  [1760183316.0644] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:48:36 IQ138000 NetworkManager[403]: <info>  [1760183316.0646] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:48:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:48:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:48:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:48:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:48:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:48:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:48:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:48:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:48:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:48:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:48:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:48:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:48:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:48:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:48:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:48:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:48:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:48:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:48:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:48:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:48:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:48:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:48:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:48:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:48:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:48:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:48:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:48:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:48:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:48:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:48:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:48:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:48:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:48:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:48:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:48:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:48:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:48:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:48:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:42 IQ138000 NetworkManager[403]: <info>  [1760183322.5628] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:48:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:48:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:49:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:49:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:49:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:49:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:49:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:49:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:49:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:49:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:49:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:49:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:49:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:49:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:49:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:49:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:49:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:49:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:49:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:49:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:49:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:49:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:49:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:49:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:49:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:49:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:49:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:49:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:49:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:49:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:49:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:49:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:49:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:49:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:49:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:49:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:49:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:49:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:49:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:49:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:49:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:49:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:49:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:49:14 IQ138000 wb-watchdog[31129]: [INFO] Interval #333 started. Waiting up to 60 seconds for error...
Oct 11 11:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L1, row count 7183, limit 7042
Oct 11 11:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6601] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6641] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6661] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6733] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6751] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6753] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6886] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6906] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6923] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6926] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6927] Config: added 'scan_ssid' value '1'
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6928] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6929] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.6930] Config: added 'psk' value '<hidden>'
Oct 11 11:49:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/238
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.7669] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:49:37 IQ138000 NetworkManager[403]: <info>  [1760183377.7671] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:49:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:49:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:49:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:49:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:49:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:49:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:49:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:49:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:49:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:49:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:49:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:49:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:49:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:49:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:49:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:49:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:49:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:49:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:49:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:49:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:49:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:49:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:49:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:49:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:49:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:49:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:49:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:49:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:49:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:49:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:49:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:49:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:49:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:49:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:49:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:49:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:49:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:49:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:50:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:50:03 IQ138000 NetworkManager[403]: <warn>  [1760183403.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:50:03 IQ138000 NetworkManager[403]: <info>  [1760183403.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:50:03 IQ138000 NetworkManager[403]: <warn>  [1760183403.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:50:03 IQ138000 NetworkManager[403]: <info>  [1760183403.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:50:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/238
Oct 11 11:50:03 IQ138000 NetworkManager[403]: <info>  [1760183403.0666] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:50:03 IQ138000 NetworkManager[403]: <info>  [1760183403.0668] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:50:09 IQ138000 NetworkManager[403]: <info>  [1760183409.3900] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:50:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:50:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:50:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:50:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:50:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:50:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:50:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:50:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:50:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:50:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:50:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:50:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:50:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:50:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:50:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:50:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:50:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:50:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:50:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:50:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:50:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:50:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:50:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:50:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:50:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:50:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:50:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:50:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:50:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:50:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:50:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:50:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:50:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:50:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:50:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:50:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:50:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:14 IQ138000 wb-watchdog[31844]: [INFO] Interval #334 started. Waiting up to 60 seconds for error...
Oct 11 11:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:15 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:50:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:50:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:50:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:50:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:50:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:50:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:50:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:50:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:50:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:50:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:50:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:50:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:50:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:50:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:50:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:50:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:50:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:50:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:50:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:50:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:50:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:50:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:50:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:50:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:50:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:50:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:50:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:50:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:50:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:50:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:50:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:50:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:50:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:50:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:50:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:50:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:50:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:50:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:50:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:51:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4632] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4637] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4643] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4696] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4716] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4718] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4838] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4865] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4888] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4891] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4893] Config: added 'scan_ssid' value '1'
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4893] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4895] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.4896] Config: added 'psk' value '<hidden>'
Oct 11 11:51:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/239
Oct 11 11:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.5631] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:51:04 IQ138000 NetworkManager[403]: <info>  [1760183464.5633] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:51:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:51:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:51:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:51:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:51:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:51:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:51:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:51:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:51:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:51:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:51:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:51:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:51:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:51:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:51:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:51:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:51:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:51:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:51:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:51:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:51:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:51:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:51:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:51:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:51:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:51:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:51:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:51:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:51:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:51:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:51:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:51:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:51:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:51:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:51:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:51:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:51:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:14 IQ138000 wb-watchdog[32441]: [INFO] Interval #335 started. Waiting up to 60 seconds for error...
Oct 11 11:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:51:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:30 IQ138000 NetworkManager[403]: <warn>  [1760183490.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:51:30 IQ138000 NetworkManager[403]: <info>  [1760183490.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:51:30 IQ138000 NetworkManager[403]: <warn>  [1760183490.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:51:30 IQ138000 NetworkManager[403]: <info>  [1760183490.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:51:30 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:51:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/239
Oct 11 11:51:30 IQ138000 NetworkManager[403]: <info>  [1760183490.0649] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:51:30 IQ138000 NetworkManager[403]: <info>  [1760183490.0652] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:51:30 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 11:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:36 IQ138000 NetworkManager[403]: <info>  [1760183496.1821] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:51:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L3, row count 7183, limit 7042
Oct 11 11:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:51:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:51:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:51:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:51:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:51:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:51:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:51:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:51:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:51:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:51:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:51:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:51:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:51:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:51:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:51:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:51:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:51:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:51:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:51:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:51:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:51:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:51:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:51:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:51:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:51:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:51:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:51:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:51:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:51:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:51:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:51:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:51:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:51:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:51:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:51:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:51:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:51:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:51:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:51:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:51:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:52:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:52:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:52:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:52:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:52:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:52:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:52:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:52:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:52:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:52:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:52:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:52:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:52:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:52:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:52:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:52:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:52:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:52:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:52:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:52:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:52:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:52:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:52:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:52:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:52:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:52:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:52:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:52:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:52:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:52:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:52:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:52:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:52:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:52:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:52:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:52:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:52:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:15 IQ138000 wb-watchdog[706]: [INFO] Interval #336 started. Waiting up to 60 seconds for error...
Oct 11 11:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3446] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3451] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3457] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3551] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3573] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3575] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3685] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3713] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3744] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3748] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3749] Config: added 'scan_ssid' value '1'
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3750] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3760] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:52:31 IQ138000 NetworkManager[403]: <info>  [1760183551.3762] Config: added 'psk' value '<hidden>'
Oct 11 11:52:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/240
Oct 11 11:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:52:32 IQ138000 NetworkManager[403]: <info>  [1760183552.4503] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:52:32 IQ138000 NetworkManager[403]: <info>  [1760183552.4505] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:52:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:52:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:52:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:52:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:52:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:52:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:52:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:52:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:52:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:52:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:52:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:52:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:52:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:52:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:52:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:52:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:52:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:52:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:52:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:52:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:52:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:52:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:52:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:52:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:52:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:52:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:52:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:52:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:52:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:52:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:52:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:52:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:52:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:52:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:52:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:52:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:52:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:52:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:52:57 IQ138000 NetworkManager[403]: <warn>  [1760183577.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:52:57 IQ138000 NetworkManager[403]: <info>  [1760183577.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:52:57 IQ138000 NetworkManager[403]: <warn>  [1760183577.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:52:57 IQ138000 NetworkManager[403]: <info>  [1760183577.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:52:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/240
Oct 11 11:52:57 IQ138000 NetworkManager[403]: <info>  [1760183577.0663] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:52:57 IQ138000 NetworkManager[403]: <info>  [1760183577.0666] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:52:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Frequency, row count 7183, limit 7042
Oct 11 11:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:03 IQ138000 NetworkManager[403]: <info>  [1760183583.0616] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:53:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:53:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:53:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:53:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:53:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:53:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:53:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:53:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:53:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:53:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:53:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:53:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:53:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:53:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:53:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:53:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:53:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:53:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:53:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:53:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:53:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:53:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:53:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:53:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:53:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:53:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:53:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:53:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:53:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:53:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:53:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:53:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:53:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:53:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:53:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:53:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:53:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:15 IQ138000 wb-watchdog[1335]: [INFO] Interval #337 started. Waiting up to 60 seconds for error...
Oct 11 11:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:53:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:53:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:53:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:53:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:53:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:53:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:53:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:53:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:53:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:53:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:53:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:53:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:53:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:53:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:53:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:53:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:53:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:53:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:53:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:53:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:53:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:53:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:53:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:53:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:53:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:53:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:53:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:53:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:53:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:53:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:53:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:53:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:53:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:53:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:53:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:53:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:53:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:53:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:53:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:53:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:53:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:53:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1499] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1512] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1540] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1640] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1671] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1674] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1773] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1801] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1820] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1825] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1826] Config: added 'scan_ssid' value '1'
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1827] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1828] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.1829] Config: added 'psk' value '<hidden>'
Oct 11 11:53:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/241
Oct 11 11:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.2525] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:53:58 IQ138000 NetworkManager[403]: <info>  [1760183638.2528] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:54:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:54:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:54:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:54:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:54:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:54:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:54:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:54:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:54:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:54:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:54:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:54:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:54:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:54:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:54:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:54:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:54:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:54:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:54:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:54:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:54:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:54:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:54:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:54:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:54:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:54:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 11:54:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:54:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:54:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:54:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:54:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:54:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:54:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:54:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:54:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:54:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:15 IQ138000 wb-watchdog[2051]: [INFO] Interval #338 started. Waiting up to 60 seconds for error...
Oct 11 11:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:54:23 IQ138000 NetworkManager[403]: <warn>  [1760183663.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:54:23 IQ138000 NetworkManager[403]: <info>  [1760183663.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:54:23 IQ138000 NetworkManager[403]: <warn>  [1760183663.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:54:23 IQ138000 NetworkManager[403]: <info>  [1760183663.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:54:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/241
Oct 11 11:54:23 IQ138000 NetworkManager[403]: <info>  [1760183663.0749] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:54:23 IQ138000 NetworkManager[403]: <info>  [1760183663.0751] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:28 IQ138000 NetworkManager[403]: <info>  [1760183668.8717] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:54:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:54:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:54:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:54:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:54:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:54:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:54:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:54:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:54:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:54:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:54:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:54:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:54:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:54:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:54:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:54:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:54:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:54:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:54:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:54:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:54:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:54:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:54:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:54:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:54:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:54:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:54:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:54:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:54:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:54:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:54:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:54:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:54:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:54:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:54:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:54:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:54:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:54:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 11:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:55:01 IQ138000 CRON[2521]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 11:55:01 IQ138000 CRON[2525]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 11:55:01 IQ138000 CRON[2521]: pam_unix(cron:session): session closed for user root
Oct 11 11:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 11:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:55:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:55:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:55:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:55:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:55:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:55:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:55:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:55:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:55:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:55:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:55:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:55:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:55:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:55:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:55:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:55:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:55:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:55:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:55:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:55:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:55:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:55:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:55:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:55:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:55:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:55:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:55:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:55:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:55:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:55:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:55:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:55:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:55:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:55:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:55:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:55:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:15 IQ138000 wb-watchdog[2738]: [INFO] Interval #339 started. Waiting up to 60 seconds for error...
Oct 11 11:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8611] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8616] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8640] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8707] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8725] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8727] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8823] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8842] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8858] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8861] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8862] Config: added 'scan_ssid' value '1'
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8863] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8865] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.8866] Config: added 'psk' value '<hidden>'
Oct 11 11:55:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/242
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.9675] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:55:23 IQ138000 NetworkManager[403]: <info>  [1760183723.9677] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:55:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L2, row count 7183, limit 7042
Oct 11 11:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:55:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:55:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:55:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:55:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:55:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:55:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:55:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:55:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:55:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:55:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:55:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:55:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:55:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:55:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:55:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:55:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:55:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:55:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:55:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:55:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:55:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:55:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:55:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:55:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:55:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:55:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:55:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:55:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:55:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:55:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:55:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:55:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:55:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:55:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:55:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:55:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:55:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:55:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:55:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:49 IQ138000 NetworkManager[403]: <warn>  [1760183749.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:55:49 IQ138000 NetworkManager[403]: <info>  [1760183749.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:55:49 IQ138000 NetworkManager[403]: <warn>  [1760183749.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:55:49 IQ138000 NetworkManager[403]: <info>  [1760183749.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:55:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/242
Oct 11 11:55:49 IQ138000 NetworkManager[403]: <info>  [1760183749.0665] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:55:49 IQ138000 NetworkManager[403]: <info>  [1760183749.0667] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:55 IQ138000 NetworkManager[403]: <info>  [1760183755.5750] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:56:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:56:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:56:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:56:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:56:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:56:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:56:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:56:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:56:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:56:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:56:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:56:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:56:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:56:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:56:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:56:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:56:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:56:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:56:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:56:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:56:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:56:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:56:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:56:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:56:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:56:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:56:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:56:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:56:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:56:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:56:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:56:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:56:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:56:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:56:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:56:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:56:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:56:15 IQ138000 wb-watchdog[3438]: [INFO] Interval #340 started. Waiting up to 60 seconds for error...
Oct 11 11:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:56:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:56:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:56:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:56:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:56:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:56:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:56:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:56:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:56:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:56:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:56:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:56:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:56:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:56:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:56:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:56:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:56:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:56:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:56:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:56:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:56:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:56:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:56:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:56:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:56:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:56:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:56:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:56:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:56:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:56:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:56:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:56:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:56:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:56:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:56:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:56:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:56:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:56:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:56:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:56:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:56:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:56:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9043] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9051] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9071] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9141] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9170] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9172] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9260] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9282] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9302] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9306] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9307] Config: added 'scan_ssid' value '1'
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9308] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9310] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:56:50 IQ138000 NetworkManager[403]: <info>  [1760183810.9311] Config: added 'psk' value '<hidden>'
Oct 11 11:56:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/243
Oct 11 11:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:51 IQ138000 NetworkManager[403]: <info>  [1760183811.0078] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:56:51 IQ138000 NetworkManager[403]: <info>  [1760183811.0081] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:57:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:57:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:57:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:57:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:57:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:57:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:57:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:57:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:57:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:57:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:57:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:57:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:57:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:57:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:57:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:57:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:57:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:57:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:57:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:57:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:57:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:57:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:57:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:57:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:57:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:57:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:57:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:57:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:57:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:57:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:57:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:57:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:57:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:57:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:57:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:57:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:15 IQ138000 wb-watchdog[4078]: [INFO] Interval #341 started. Waiting up to 60 seconds for error...
Oct 11 11:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:16 IQ138000 NetworkManager[403]: <warn>  [1760183836.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:57:16 IQ138000 NetworkManager[403]: <info>  [1760183836.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:57:16 IQ138000 NetworkManager[403]: <warn>  [1760183836.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:57:16 IQ138000 NetworkManager[403]: <info>  [1760183836.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:57:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/243
Oct 11 11:57:16 IQ138000 NetworkManager[403]: <info>  [1760183836.0747] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:57:16 IQ138000 NetworkManager[403]: <info>  [1760183836.0749] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:57:16 IQ138000 npm[3801]: [2025-10-11 11:57:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.95,"last_seen":1760183836812,"linkquality":54,"power_outage_count":25795,"pressure":992.3,"temperature":22.93,"voltage":2995}'
Oct 11 11:57:16 IQ138000 npm[3801]: [2025-10-11 11:57:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.17,"last_seen":1760183836827,"linkquality":54,"power_outage_count":25795,"pressure":992.3,"temperature":22.93,"voltage":2995}'
Oct 11 11:57:16 IQ138000 npm[3801]: [2025-10-11 11:57:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.17,"last_seen":1760183836862,"linkquality":51,"power_outage_count":25795,"pressure":992.2,"temperature":22.93,"voltage":2995}'
Oct 11 11:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:21 IQ138000 NetworkManager[403]: <info>  [1760183841.6617] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:57:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17170 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:57:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:57:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:57:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:57:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:57:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:57:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:57:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:57:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:57:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:57:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:57:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:57:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:57:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:57:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:57:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:57:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:57:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:57:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:57:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:57:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:57:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:57:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:57:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:57:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:57:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:57:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:57:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:57:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:57:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:57:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:57:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:57:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:57:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:57:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:57:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:57:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 5 input(s) @ 5905 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:57:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:57:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:58:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:58:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:58:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:58:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:58:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:58:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:58:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:58:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:58:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:58:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:58:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:58:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:58:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:58:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:58:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:58:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:58:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:58:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:58:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:58:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:58:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:58:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:58:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:58:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:58:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:58:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:58:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:58:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:58:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:58:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:58:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:58:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:58:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:58:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:58:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:58:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:58:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:15 IQ138000 wb-watchdog[4820]: [INFO] Interval #342 started. Waiting up to 60 seconds for error...
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7751] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7756] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7762] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7810] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7838] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7849] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7967] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.7986] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8017] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8020] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8021] Config: added 'scan_ssid' value '1'
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8022] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8023] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8024] Config: added 'psk' value '<hidden>'
Oct 11 11:58:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/244
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8738] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:58:16 IQ138000 NetworkManager[403]: <info>  [1760183896.8749] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:58:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 11:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:58:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 11:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 11:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:58:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:58:42 IQ138000 NetworkManager[403]: <warn>  [1760183922.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 11:58:42 IQ138000 NetworkManager[403]: <info>  [1760183922.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 11:58:42 IQ138000 NetworkManager[403]: <warn>  [1760183922.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 11:58:42 IQ138000 NetworkManager[403]: <info>  [1760183922.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 11:58:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/244
Oct 11 11:58:42 IQ138000 NetworkManager[403]: <info>  [1760183922.0680] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 11:58:42 IQ138000 NetworkManager[403]: <info>  [1760183922.0682] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 11:58:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:58:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:58:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:58:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:58:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:58:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:58:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:58:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:58:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:58:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:58:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:58:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:58:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:58:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:58:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:58:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:58:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:58:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:58:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:58:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:58:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:58:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:58:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:58:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:58:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:58:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:58:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:58:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:58:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:58:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:58:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:58:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:58:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:58:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:58:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:58:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:58:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:58:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:48 IQ138000 NetworkManager[403]: <info>  [1760183928.5269] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 11:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:58:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:58:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 11:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 11:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:59:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:59:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:59:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:59:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:59:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:59:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:59:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:59:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:59:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:59:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:59:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:59:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:59:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:59:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:59:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:59:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:59:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:59:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:59:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:59:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:59:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:59:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:59:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:59:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:59:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:59:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:59:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:59:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:59:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:59:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:59:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:59:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:59:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:59:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:59:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:15 IQ138000 wb-watchdog[5423]: [INFO] Interval #343 started. Waiting up to 60 seconds for error...
Oct 11 11:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4620 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 11:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 11:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:59:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6324] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6328] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6336] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6411] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6438] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6440] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6543] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6569] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6590] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6594] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6595] Config: added 'scan_ssid' value '1'
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6596] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6597] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.6598] Config: added 'psk' value '<hidden>'
Oct 11 11:59:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/245
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.7303] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 11:59:43 IQ138000 NetworkManager[403]: <info>  [1760183983.7305] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 11:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 11:59:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 11:59:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 11:59:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 11:59:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 11:59:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 11:59:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 11:59:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 11:59:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 11:59:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 11:59:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 11:59:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 11:59:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 11:59:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 11:59:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 11:59:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 11:59:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 11:59:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 11:59:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 11:59:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 11:59:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 11:59:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 11:59:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:59:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 11:59:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 11:59:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 11:59:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 11:59:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 11:59:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 11:59:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 11:59:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 11:59:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 11:59:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 11:59:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 11:59:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 11:59:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 11:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 11:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 11:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 11:59:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 11:59:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 11:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 11:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 11:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:09 IQ138000 NetworkManager[403]: <warn>  [1760184009.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:00:09 IQ138000 NetworkManager[403]: <info>  [1760184009.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:00:09 IQ138000 NetworkManager[403]: <warn>  [1760184009.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:00:09 IQ138000 NetworkManager[403]: <info>  [1760184009.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:00:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/245
Oct 11 12:00:09 IQ138000 NetworkManager[403]: <info>  [1760184009.0682] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:00:09 IQ138000 NetworkManager[403]: <info>  [1760184009.0692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:00:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:00:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:00:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:00:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:00:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:00:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:00:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:00:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:00:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:00:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:00:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:00:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:00:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:00:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:00:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:00:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:00:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:00:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:00:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:00:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:00:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:00:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:00:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:00:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:00:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:00:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:00:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:00:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:00:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:00:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:00:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:00:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:00:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:00:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:00:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:00:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:00:15 IQ138000 NetworkManager[403]: <info>  [1760184015.3874] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:15 IQ138000 wb-watchdog[6161]: [INFO] Interval #344 started. Waiting up to 60 seconds for error...
Oct 11 12:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:21 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:00:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:00:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:00:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:00:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:00:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:00:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:00:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:00:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:00:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:00:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:00:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:00:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:00:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:00:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:00:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:00:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:00:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:00:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:00:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:00:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:00:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:00:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:00:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:00:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:00:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:00:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:00:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:00:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:00:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:00:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:00:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:00:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:00:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:00:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:00:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:00:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:00:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:00:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:00:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:00:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:00:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.3920] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.3925] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.3930] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.3975] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.3991] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.3993] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4135] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4177] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4205] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4224] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4241] Config: added 'scan_ssid' value '1'
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4243] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4245] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.4247] Config: added 'psk' value '<hidden>'
Oct 11 12:01:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/246
Oct 11 12:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.5069] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:01:10 IQ138000 NetworkManager[403]: <info>  [1760184070.5080] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:01:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:01:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:01:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:01:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:01:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:01:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:01:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:01:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:01:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:01:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:01:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:01:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:01:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:01:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:01:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:01:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:01:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:01:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:01:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:01:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:01:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:01:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:01:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:01:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:01:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:01:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:01:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:01:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:01:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:01:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:01:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:01:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:01:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:01:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:01:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:01:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:01:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:01:15 IQ138000 wb-watchdog[6773]: [INFO] Interval #345 started. Waiting up to 60 seconds for error...
Oct 11 12:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:01:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:01:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:01:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:01:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:01:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:01:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:01:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:36 IQ138000 NetworkManager[403]: <warn>  [1760184096.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:01:36 IQ138000 NetworkManager[403]: <info>  [1760184096.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:01:36 IQ138000 NetworkManager[403]: <warn>  [1760184096.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:01:36 IQ138000 NetworkManager[403]: <info>  [1760184096.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:01:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:01:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/246
Oct 11 12:01:36 IQ138000 NetworkManager[403]: <info>  [1760184096.0666] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:01:36 IQ138000 NetworkManager[403]: <info>  [1760184096.0668] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:42 IQ138000 NetworkManager[403]: <info>  [1760184102.1401] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:01:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:01:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:01:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:01:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:01:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:01:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:01:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:01:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:01:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:01:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:01:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:01:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:01:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:01:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:01:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:01:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:01:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:01:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:01:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:01:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:01:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:01:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:01:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:01:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:01:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:01:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:01:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:01:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:01:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:01:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:01:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:01:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:01:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:01:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:01:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:01:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:01:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:01:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:02:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:02:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:02:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:02:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:02:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:02:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:02:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:02:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:02:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:02:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:02:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:02:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:02:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:02:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:02:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:02:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:02:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:02:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:02:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:02:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:02:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:02:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:02:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:02:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:02:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:02:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:02:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:02:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:02:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:02:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:02:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:02:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:02:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:02:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:02:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:02:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:02:16 IQ138000 wb-watchdog[7478]: [INFO] Interval #346 started. Waiting up to 60 seconds for error...
Oct 11 12:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:02:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:02:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:02:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1665] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1690] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1701] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1796] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1814] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1815] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1917] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1949] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1969] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1973] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1974] Config: added 'scan_ssid' value '1'
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1975] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1976] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:02:37 IQ138000 NetworkManager[403]: <info>  [1760184157.1977] Config: added 'psk' value '<hidden>'
Oct 11 12:02:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/247
Oct 11 12:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:02:40 IQ138000 NetworkManager[403]: <info>  [1760184160.2787] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:02:40 IQ138000 NetworkManager[403]: <info>  [1760184160.2789] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:02:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:02:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:02:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:02:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:02:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:02:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:02:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:02:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:02:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:02:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:02:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:02:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:02:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:02:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:02:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:02:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:02:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:02:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:02:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:02:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:02:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:02:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:02:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:02:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:02:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:02:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:02:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:02:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:02:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:02:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:02:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:02:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:02:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:02:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:02:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:02:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:02:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L2, row count 7183, limit 7042
Oct 11 12:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:02 IQ138000 NetworkManager[403]: <warn>  [1760184182.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:03:02 IQ138000 NetworkManager[403]: <info>  [1760184182.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:03:02 IQ138000 NetworkManager[403]: <warn>  [1760184182.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:03:02 IQ138000 NetworkManager[403]: <info>  [1760184182.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:03:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/247
Oct 11 12:03:02 IQ138000 NetworkManager[403]: <info>  [1760184182.0674] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:03:02 IQ138000 NetworkManager[403]: <info>  [1760184182.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:07 IQ138000 NetworkManager[403]: <info>  [1760184187.9333] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:03:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:03:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:03:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:03:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:03:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:03:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:03:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:03:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:03:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:03:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:03:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:03:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:03:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:03:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:03:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:03:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:03:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:03:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:03:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:03:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:03:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:03:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:03:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:03:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:03:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:03:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:03:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:03:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:03:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:03:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:03:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:03:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:03:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:03:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:03:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:03:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:03:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:03:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:03:16 IQ138000 wb-watchdog[8111]: [INFO] Interval #347 started. Waiting up to 60 seconds for error...
Oct 11 12:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:03:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:03:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:03:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:03:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:03:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:03:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:03:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:03:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:03:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:03:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:03:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:03:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:03:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:03:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:03:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:03:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:03:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:03:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:03:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:03:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:03:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:03:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:03:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:03:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:03:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:03:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:03:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:03:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:03:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:03:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:03:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:03:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:03:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:03:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:03:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:03:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:03:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:03:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:03:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:03:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:03:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0652] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0656] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0664] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0740] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0770] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0773] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0917] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.0956] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1008] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1012] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1014] Config: added 'scan_ssid' value '1'
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1014] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1016] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1017] Config: added 'psk' value '<hidden>'
Oct 11 12:04:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/248
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1691] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:04:03 IQ138000 NetworkManager[403]: <info>  [1760184243.1693] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:04:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:04:16 IQ138000 wb-watchdog[8790]: [INFO] Interval #348 started. Waiting up to 60 seconds for error...
Oct 11 12:04:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:04:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:04:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:04:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:04:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:04:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:04:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:04:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:04:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:04:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:04:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:04:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:04:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:04:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:04:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:04:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:04:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:04:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:04:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:04:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:04:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:04:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:04:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:04:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:04:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:04:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:04:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:04:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:04:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:04:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:04:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:04:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:04:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:04:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:04:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:04:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:04:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:04:28 IQ138000 NetworkManager[403]: <warn>  [1760184268.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:04:28 IQ138000 NetworkManager[403]: <info>  [1760184268.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:04:28 IQ138000 NetworkManager[403]: <warn>  [1760184268.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:04:28 IQ138000 NetworkManager[403]: <info>  [1760184268.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:04:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/248
Oct 11 12:04:28 IQ138000 NetworkManager[403]: <info>  [1760184268.0662] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:04:28 IQ138000 NetworkManager[403]: <info>  [1760184268.0678] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:04:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:33 IQ138000 NetworkManager[403]: <info>  [1760184273.8455] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:04:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:04:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:04:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:04:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:04:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:04:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:04:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:04:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:04:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:04:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:04:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:04:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:04:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:04:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:04:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:04:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:04:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:04:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:04:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:04:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:04:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:04:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:04:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:04:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:04:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:04:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:04:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:04:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:04:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:04:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:04:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:04:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:04:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:04:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:04:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:04:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:04:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:04:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:05:01 IQ138000 CRON[9215]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:05:01 IQ138000 CRON[9219]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 12:05:01 IQ138000 CRON[9215]: pam_unix(cron:session): session closed for user root
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:05:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:05:16 IQ138000 wb-watchdog[9433]: [INFO] Interval #349 started. Waiting up to 60 seconds for error...
Oct 11 12:05:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:05:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:05:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:05:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:05:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:05:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:05:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:05:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:05:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:05:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:05:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:05:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:05:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:05:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:05:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:05:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:05:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:05:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:05:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:05:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:05:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:05:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:05:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:05:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:05:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:05:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:05:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:05:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:05:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:05:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:05:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:05:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:05:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:05:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:05:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:05:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:05:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0675] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0696] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0705] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0835] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0853] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0855] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0947] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0970] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0986] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0989] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0990] Config: added 'scan_ssid' value '1'
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0991] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0992] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.0993] Config: added 'psk' value '<hidden>'
Oct 11 12:05:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/249
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.1709] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:05:29 IQ138000 NetworkManager[403]: <info>  [1760184329.1714] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:05:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:05:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:05:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:05:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:05:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:05:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:05:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:05:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:05:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:05:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:05:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:05:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:05:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:05:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:05:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:05:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:05:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:05:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:05:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:05:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:05:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:05:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:05:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:05:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:05:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:05:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:05:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:05:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:05:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:05:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:05:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:05:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:05:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:05:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:05:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:05:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:05:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:05:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:05:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:05:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:05:54 IQ138000 NetworkManager[403]: <warn>  [1760184354.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:05:54 IQ138000 NetworkManager[403]: <info>  [1760184354.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:05:54 IQ138000 NetworkManager[403]: <warn>  [1760184354.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:05:54 IQ138000 NetworkManager[403]: <info>  [1760184354.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:05:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/249
Oct 11 12:05:54 IQ138000 NetworkManager[403]: <info>  [1760184354.0667] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:05:54 IQ138000 NetworkManager[403]: <info>  [1760184354.0669] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:05:59 IQ138000 NetworkManager[403]: <info>  [1760184359.8414] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:06:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:06:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:06:16 IQ138000 wb-watchdog[10117]: [INFO] Interval #350 started. Waiting up to 60 seconds for error...
Oct 11 12:06:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:06:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:06:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:06:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:06:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:06:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:06:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:06:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:06:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:06:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:06:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:06:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:06:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:06:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:06:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:06:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:06:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:06:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:06:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:06:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:06:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:06:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:06:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:06:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:06:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:06:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:06:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:06:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:06:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:06:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:06:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:06:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:06:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:06:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:06:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:06:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:06:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:06:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:06:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:06:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:06:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:06:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:06:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:06:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:06:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:06:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:06:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:06:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:06:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:06:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:06:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:06:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:06:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:06:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:06:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:06:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:06:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:06:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:06:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:06:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:06:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:06:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:06:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:06:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:06:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:06:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:06:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:06:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:06:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:06:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:06:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:06:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:06:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:06:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:06:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:06:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:06:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9985 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.7928] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.7952] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.7960] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8030] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8048] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8050] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8153] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8180] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8207] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8214] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8217] Config: added 'scan_ssid' value '1'
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8218] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8220] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8221] Config: added 'psk' value '<hidden>'
Oct 11 12:06:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/250
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8959] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:06:54 IQ138000 NetworkManager[403]: <info>  [1760184414.8961] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L2, row count 7183, limit 7042
Oct 11 12:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:16 IQ138000 wb-watchdog[10734]: [INFO] Interval #351 started. Waiting up to 60 seconds for error...
Oct 11 12:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:07:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:07:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:07:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:07:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:07:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:07:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:07:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:07:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:07:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:07:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:07:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:07:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:07:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:07:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:07:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:07:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:07:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:07:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:07:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:07:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:07:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:07:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:07:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:07:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:07:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:07:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:07:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:07:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:07:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:07:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:07:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:07:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:07:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:07:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:07:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:07:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:20 IQ138000 NetworkManager[403]: <warn>  [1760184440.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:07:20 IQ138000 NetworkManager[403]: <info>  [1760184440.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:07:20 IQ138000 NetworkManager[403]: <warn>  [1760184440.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:07:20 IQ138000 NetworkManager[403]: <info>  [1760184440.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:07:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/250
Oct 11 12:07:20 IQ138000 NetworkManager[403]: <info>  [1760184440.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:07:20 IQ138000 NetworkManager[403]: <info>  [1760184440.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:07:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:07:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:26 IQ138000 NetworkManager[403]: <info>  [1760184446.5339] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L1, row count 7183, limit 7042
Oct 11 12:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:07:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:07:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:07:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:07:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:07:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:07:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:07:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:07:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:07:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:07:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:07:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:07:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:07:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:07:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:07:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:07:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:07:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:07:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:07:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:07:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:07:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:07:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:07:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:07:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:07:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:07:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:07:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:07:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:07:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:07:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:07:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:07:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:07:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:07:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:07:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:07:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:07:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:07:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:07:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:07:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:01 IQ138000 CRON[11228]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:08:01 IQ138000 CRON[11232]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 12:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:08:07 IQ138000 sSMTP[11243]: Unable to locate mail
Oct 11 12:08:07 IQ138000 cron[11243]: sendmail: Cannot open mail:25
Oct 11 12:08:07 IQ138000 sSMTP[11243]: Cannot open mail:25
Oct 11 12:08:07 IQ138000 CRON[11228]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 12:08:07 IQ138000 CRON[11228]: pam_unix(cron:session): session closed for user root
Oct 11 12:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:16 IQ138000 wb-watchdog[11458]: [INFO] Interval #352 started. Waiting up to 60 seconds for error...
Oct 11 12:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:08:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:08:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:08:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:08:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:08:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:08:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:08:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:08:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:08:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:08:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:08:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:08:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:08:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:08:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:08:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:08:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:08:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:08:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:08:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:08:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:08:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:08:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:08:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:08:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:08:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:08:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:08:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:08:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:08:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:08:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:08:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:08:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:08:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:08:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:08:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:08:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:08:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5465] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5469] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5481] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5542] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5560] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5563] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5667] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5687] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5708] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5711] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5713] Config: added 'scan_ssid' value '1'
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5715] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5716] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.5717] Config: added 'psk' value '<hidden>'
Oct 11 12:08:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/251
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.6465] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:08:21 IQ138000 NetworkManager[403]: <info>  [1760184501.6467] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:08:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:08:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 9984 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16932 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:47 IQ138000 NetworkManager[403]: <warn>  [1760184527.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:08:47 IQ138000 NetworkManager[403]: <info>  [1760184527.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:08:47 IQ138000 NetworkManager[403]: <warn>  [1760184527.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:08:47 IQ138000 NetworkManager[403]: <info>  [1760184527.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:08:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:08:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/251
Oct 11 12:08:47 IQ138000 NetworkManager[403]: <info>  [1760184527.0894] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:08:47 IQ138000 NetworkManager[403]: <info>  [1760184527.0896] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:08:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:08:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:08:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:08:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:08:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:08:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:08:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:08:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:08:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:08:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:08:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:08:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:08:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:08:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:08:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:08:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:08:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:08:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:08:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:08:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:08:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:08:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:08:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:08:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:08:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:08:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:08:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:08:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:08:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:08:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:08:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:08:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:08:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:08:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:08:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:08:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:08:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:08:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:53 IQ138000 NetworkManager[403]: <info>  [1760184533.3114] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:08:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:08:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:09:16 IQ138000 wb-watchdog[12058]: [INFO] Interval #353 started. Waiting up to 60 seconds for error...
Oct 11 12:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:09:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:09:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:09:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:09:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:09:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:09:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:09:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:09:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:09:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:09:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:09:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:09:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:09:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:09:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:09:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:09:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:09:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:09:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:09:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:09:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:09:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:09:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:09:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:09:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:09:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:09:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:09:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:09:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:09:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:09:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:09:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:09:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:09:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:09:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:09:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:09:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:09:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:09:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:09:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:09:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.2967] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.2972] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.2977] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3053] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3088] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3090] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3217] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3241] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3265] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3269] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3271] Config: added 'scan_ssid' value '1'
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3282] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3285] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:09:48 IQ138000 NetworkManager[403]: <info>  [1760184588.3286] Config: added 'psk' value '<hidden>'
Oct 11 12:09:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/252
Oct 11 12:09:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:09:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:09:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:09:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:09:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:09:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:09:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:09:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:09:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:09:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:09:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:09:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:09:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:09:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:09:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:09:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:09:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:09:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:09:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:09:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:09:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:09:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:09:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:09:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:09:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:09:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:09:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:09:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:09:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:09:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:09:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:09:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:09:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:09:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:09:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:09:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:09:52 IQ138000 NetworkManager[403]: <info>  [1760184592.4035] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:09:52 IQ138000 NetworkManager[403]: <info>  [1760184592.4037] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:09:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:09:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:10:14 IQ138000 NetworkManager[403]: <warn>  [1760184614.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:10:14 IQ138000 NetworkManager[403]: <info>  [1760184614.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:10:14 IQ138000 NetworkManager[403]: <warn>  [1760184614.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:10:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/252
Oct 11 12:10:14 IQ138000 NetworkManager[403]: <info>  [1760184614.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:10:14 IQ138000 NetworkManager[403]: <info>  [1760184614.0635] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:10:14 IQ138000 NetworkManager[403]: <info>  [1760184614.0637] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:10:16 IQ138000 wb-watchdog[12771]: [INFO] Interval #354 started. Waiting up to 60 seconds for error...
Oct 11 12:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:10:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:10:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:10:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:10:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:10:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:10:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:10:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:10:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:10:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:10:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:10:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:10:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:10:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:10:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:10:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:10:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:10:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:10:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:10:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:10:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:10:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:10:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:10:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:10:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:10:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:10:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:10:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:10:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:10:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:10:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:10:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:10:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:10:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:10:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:10:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:10:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:10:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:10:20 IQ138000 NetworkManager[403]: <info>  [1760184620.0513] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:10:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:10:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:10:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:10:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:10:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:10:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:10:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:10:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:10:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:10:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:10:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:10:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:10:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:10:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:10:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:10:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:10:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:10:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:10:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:10:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:10:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:10:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:10:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:10:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:10:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:10:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:10:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:10:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:10:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:10:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:10:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:10:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:10:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:10:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:10:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:10:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:10:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:10:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:10:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:11:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:11:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1454] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1459] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1465] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1555] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1574] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1576] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1666] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1687] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1707] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1711] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1713] Config: added 'scan_ssid' value '1'
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1713] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1715] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.1716] Config: added 'psk' value '<hidden>'
Oct 11 12:11:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/253
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.2448] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:11:15 IQ138000 NetworkManager[403]: <info>  [1760184675.2449] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:16 IQ138000 wb-watchdog[13375]: [INFO] Interval #355 started. Waiting up to 60 seconds for error...
Oct 11 12:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:11:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:11:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:11:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:11:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:11:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:11:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:11:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:11:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:11:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:11:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:11:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:11:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:11:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:11:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:11:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:11:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:11:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:11:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:11:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:11:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:11:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:11:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:11:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:11:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:11:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:11:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:11:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:11:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:11:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:11:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:11:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:11:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:11:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:11:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:11:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:11:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:11:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:11:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 12:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:11:39 IQ138000 npm[3801]: [2025-10-11 12:11:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.63,"last_seen":1760184699408,"linkquality":116,"power_outage_count":48745,"temperature":27.57,"voltage":3025}'
Oct 11 12:11:39 IQ138000 npm[3801]: [2025-10-11 12:11:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.4,"last_seen":1760184699419,"linkquality":116,"power_outage_count":48745,"temperature":27.57,"voltage":3025}'
Oct 11 12:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:11:40 IQ138000 NetworkManager[403]: <warn>  [1760184700.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:11:40 IQ138000 NetworkManager[403]: <info>  [1760184700.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:11:40 IQ138000 NetworkManager[403]: <warn>  [1760184700.0259] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:11:40 IQ138000 NetworkManager[403]: <info>  [1760184700.0274] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:11:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/253
Oct 11 12:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:40 IQ138000 NetworkManager[403]: <info>  [1760184700.0737] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:11:40 IQ138000 NetworkManager[403]: <info>  [1760184700.0739] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:11:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:11:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:11:45 IQ138000 NetworkManager[403]: <info>  [1760184705.8626] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:11:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:11:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:11:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:11:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:11:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:11:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:11:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:11:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:11:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:11:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:11:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:11:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:11:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:11:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:11:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:11:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:11:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:11:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:11:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:11:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:11:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:11:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:11:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:11:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:11:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:11:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:11:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:11:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:11:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:11:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:11:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:11:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:11:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:11:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:11:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:12:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:12:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:16 IQ138000 wb-watchdog[14077]: [INFO] Interval #356 started. Waiting up to 60 seconds for error...
Oct 11 12:12:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:12:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:12:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:12:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:12:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:12:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:12:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:12:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:12:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:12:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:12:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:12:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:12:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:12:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:12:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:12:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:12:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:12:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:12:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:12:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:12:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:12:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:12:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:12:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:12:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:12:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:12:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:12:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:12:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:12:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:12:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:12:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:12:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:12:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:12:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:12:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:12:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:12:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:12:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9022] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9039] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9072] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9138] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9176] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9178] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9264] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9293] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9332] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9335] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9336] Config: added 'scan_ssid' value '1'
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9337] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9338] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:12:40 IQ138000 NetworkManager[403]: <info>  [1760184760.9339] Config: added 'psk' value '<hidden>'
Oct 11 12:12:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/254
Oct 11 12:12:41 IQ138000 NetworkManager[403]: <info>  [1760184761.0107] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:12:41 IQ138000 NetworkManager[403]: <info>  [1760184761.0109] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:12:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:12:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:12:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:12:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:12:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:12:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:12:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:12:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:12:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:12:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:12:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:12:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:12:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:12:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:12:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:12:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:12:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:12:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:12:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:12:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:12:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:12:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:12:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:12:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:12:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:12:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:12:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:12:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:12:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:12:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:12:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:12:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:12:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:12:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:12:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:12:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L3, row count 7183, limit 7042
Oct 11 12:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:13:06 IQ138000 NetworkManager[403]: <warn>  [1760184786.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:13:06 IQ138000 NetworkManager[403]: <info>  [1760184786.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:13:06 IQ138000 NetworkManager[403]: <warn>  [1760184786.0266] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:13:06 IQ138000 NetworkManager[403]: <info>  [1760184786.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:13:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/254
Oct 11 12:13:06 IQ138000 NetworkManager[403]: <info>  [1760184786.0734] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:13:06 IQ138000 NetworkManager[403]: <info>  [1760184786.0742] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:11 IQ138000 NetworkManager[403]: <info>  [1760184791.6580] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:13:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:16 IQ138000 wb-watchdog[14705]: [INFO] Interval #357 started. Waiting up to 60 seconds for error...
Oct 11 12:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:13:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:13:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:13:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:13:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:13:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:13:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:13:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:13:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:13:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:13:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:13:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:13:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:13:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:13:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:13:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:13:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:13:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:13:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:13:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:13:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:13:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:13:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:13:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:13:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:13:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:13:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:13:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:13:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:13:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:13:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:13:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:13:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:13:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:13:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:13:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:13:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:13:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:13:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:13:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:13:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:13:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:13:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:13:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:13:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:13:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:13:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:13:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:13:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:13:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:13:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:13:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:13:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:13:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:13:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:13:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:13:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:13:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:13:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:13:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:13:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:13:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:13:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:13:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:13:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:13:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:13:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:13:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:13:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:13:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:13:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:13:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:13:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:13:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:13:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:13:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:13:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:13:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:14:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5788] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5793] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5799] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5854] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5879] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5881] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5962] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.5981] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6010] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6013] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6015] Config: added 'scan_ssid' value '1'
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6015] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6017] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6018] Config: added 'psk' value '<hidden>'
Oct 11 12:14:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/255
Oct 11 12:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6868] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:14:06 IQ138000 NetworkManager[403]: <info>  [1760184846.6870] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 12:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:14:16 IQ138000 wb-watchdog[15381]: [INFO] Interval #358 started. Waiting up to 60 seconds for error...
Oct 11 12:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:14:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:14:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:14:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:14:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:14:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:14:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:14:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:14:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:14:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:14:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:14:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:14:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:14:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:14:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:14:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:14:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:14:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:14:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:14:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:14:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:14:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:14:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:14:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:14:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:14:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:14:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:14:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:14:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:14:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:14:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:14:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:14:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:14:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:14:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:14:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:14:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:14:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:14:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:14:32 IQ138000 NetworkManager[403]: <warn>  [1760184872.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:14:32 IQ138000 NetworkManager[403]: <info>  [1760184872.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:14:32 IQ138000 NetworkManager[403]: <warn>  [1760184872.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:14:32 IQ138000 NetworkManager[403]: <info>  [1760184872.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:14:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/255
Oct 11 12:14:32 IQ138000 NetworkManager[403]: <info>  [1760184872.0706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:14:32 IQ138000 NetworkManager[403]: <info>  [1760184872.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:14:38 IQ138000 NetworkManager[403]: <info>  [1760184878.3201] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:14:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:14:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:14:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:14:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:14:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:14:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:14:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:14:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:14:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:14:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:14:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:14:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:14:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:14:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:14:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:14:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:14:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:14:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:14:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:14:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:14:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:14:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:14:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:14:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:14:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:14:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:14:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:14:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:14:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:14:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:14:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:14:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:14:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:14:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:14:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:14:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:14:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:14:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:14:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:14:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:15:01 IQ138000 CRON[15811]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:15:01 IQ138000 CRON[15821]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 12:15:01 IQ138000 CRON[15811]: pam_unix(cron:session): session closed for user root
Oct 11 12:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:15:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:15:16 IQ138000 wb-watchdog[16022]: [INFO] Interval #359 started. Waiting up to 60 seconds for error...
Oct 11 12:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:15:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:15:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:15:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:15:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:15:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:15:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:15:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:15:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:15:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:15:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:15:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:15:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:15:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:15:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:15:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:15:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:15:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:15:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:15:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:15:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:15:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:15:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:15:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:15:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:15:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:15:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:15:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:15:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:15:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:15:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:15:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:15:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:15:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:15:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:15:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:15:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:15:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:15:30 IQ138000 npm[3801]: [2025-10-11 12:15:30] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.4,"last_seen":1760184930472,"linkquality":94,"power_outage_count":48745,"temperature":27.06,"voltage":3025}'
Oct 11 12:15:30 IQ138000 npm[3801]: [2025-10-11 12:15:30] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.53,"last_seen":1760184930481,"linkquality":98,"power_outage_count":48745,"temperature":27.06,"voltage":3025}'
Oct 11 12:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4014] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4020] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4027] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4132] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4165] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4167] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4359] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4383] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4404] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4408] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4410] Config: added 'scan_ssid' value '1'
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4411] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4413] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.4414] Config: added 'psk' value '<hidden>'
Oct 11 12:15:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/256
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.5295] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:15:33 IQ138000 NetworkManager[403]: <info>  [1760184933.5298] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:15:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:15:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:15:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:48 IQ138000 npm[3801]: [2025-10-11 12:15:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":47.17,"last_seen":1760184948329,"linkquality":21,"power_outage_count":25795,"pressure":992.2,"temperature":22.7,"voltage":2995}'
Oct 11 12:15:48 IQ138000 npm[3801]: [2025-10-11 12:15:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":46.94,"last_seen":1760184948348,"linkquality":18,"power_outage_count":25795,"pressure":992.2,"temperature":22.7,"voltage":2995}'
Oct 11 12:15:48 IQ138000 npm[3801]: [2025-10-11 12:15:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":46.94,"last_seen":1760184948364,"linkquality":14,"power_outage_count":25795,"pressure":992,"temperature":22.7,"voltage":2995}'
Oct 11 12:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:15:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:15:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:15:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:15:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:15:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:15:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:15:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:15:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:15:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:15:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:15:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:15:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:15:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:15:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:15:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:15:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:15:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:15:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:15:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:15:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:15:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:15:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:15:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:15:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:15:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:15:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:15:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:15:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:15:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:15:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:15:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:15:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:15:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:15:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:15:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:15:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:15:59 IQ138000 NetworkManager[403]: <warn>  [1760184959.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:15:59 IQ138000 NetworkManager[403]: <info>  [1760184959.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:15:59 IQ138000 NetworkManager[403]: <warn>  [1760184959.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:15:59 IQ138000 NetworkManager[403]: <info>  [1760184959.0283] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:15:59 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:15:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/256
Oct 11 12:15:59 IQ138000 NetworkManager[403]: <info>  [1760184959.0728] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:15:59 IQ138000 NetworkManager[403]: <info>  [1760184959.0730] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:15:59 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:16:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:05 IQ138000 NetworkManager[403]: <info>  [1760184965.1157] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:16 IQ138000 wb-watchdog[16712]: [INFO] Interval #360 started. Waiting up to 60 seconds for error...
Oct 11 12:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:16:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:16:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:16:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:16:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:16:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:16:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:16:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:16:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:16:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:16:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:16:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:16:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:16:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:16:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:16:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:16:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:16:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:16:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:16:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:16:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:16:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:16:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:16:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:16:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:16:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:16:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:16:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:16:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:16:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:16:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:16:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:16:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:16:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:16:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:16:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:16:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:16:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:16:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:16:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:16:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:16:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:16:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:16:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:16:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:16:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:16:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:16:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:16:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:16:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:16:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:16:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:16:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:16:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:16:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:16:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:16:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:16:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:16:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:16:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:16:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:16:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:16:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:16:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:16:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:16:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:16:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:16:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:16:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:16:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:16:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:16:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:16:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:16:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:16:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L3, row count 7183, limit 7042
Oct 11 12:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:16:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:16:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2124] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2128] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2140] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2253] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2283] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2285] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2425] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2456] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2472] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2475] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2476] Config: added 'scan_ssid' value '1'
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2477] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2478] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:17:00 IQ138000 NetworkManager[403]: <info>  [1760185020.2479] Config: added 'psk' value '<hidden>'
Oct 11 12:17:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/257
Oct 11 12:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:01 IQ138000 CRON[17135]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:17:01 IQ138000 CRON[17139]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 12:17:01 IQ138000 CRON[17135]: pam_unix(cron:session): session closed for user root
Oct 11 12:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:04 IQ138000 NetworkManager[403]: <info>  [1760185024.3331] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:17:04 IQ138000 NetworkManager[403]: <info>  [1760185024.3333] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:17:16 IQ138000 wb-watchdog[17333]: [INFO] Interval #361 started. Waiting up to 60 seconds for error...
Oct 11 12:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:17:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:18 IQ138000 kernel: RTW: OnDeAuth(wlan1) reason=3, ta=fc:70:2e:21:e2:7e, ignore=0
Oct 11 12:17:18 IQ138000 kernel: RTW: OnDeAuth(wlan0) reason=3, ta=fc:70:2e:21:e2:7e, ignore=0
Oct 11 12:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:17:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:17:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:17:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:17:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:17:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:17:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:17:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:17:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:17:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:17:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:17:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:17:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:17:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:17:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:17:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:17:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:17:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:17:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:17:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:17:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:17:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:17:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:17:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:17:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:17:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:17:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:17:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:17:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:17:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:17:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:17:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:17:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:17:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:17:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:17:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:17:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:25 IQ138000 NetworkManager[403]: <warn>  [1760185045.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:17:25 IQ138000 NetworkManager[403]: <info>  [1760185045.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:17:25 IQ138000 NetworkManager[403]: <warn>  [1760185045.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:17:25 IQ138000 NetworkManager[403]: <info>  [1760185045.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:17:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/257
Oct 11 12:17:25 IQ138000 NetworkManager[403]: <info>  [1760185045.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:17:25 IQ138000 NetworkManager[403]: <info>  [1760185045.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:17:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:30 IQ138000 NetworkManager[403]: <info>  [1760185050.9407] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:17:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:17:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:17:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:17:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:17:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:17:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:17:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:17:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:17:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:17:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:17:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:17:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:17:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:17:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:17:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:17:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:17:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:17:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:17:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:17:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:17:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:17:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:17:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:17:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:17:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:17:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:17:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:17:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:17:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:17:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:17:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:17:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:17:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:17:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:17:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:17:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:17:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:17:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:17:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:17:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:18:16 IQ138000 wb-watchdog[18049]: [INFO] Interval #362 started. Waiting up to 60 seconds for error...
Oct 11 12:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:18:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:18:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:18:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:18:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:18:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:18:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:18:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:18:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:18:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:18:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:18:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:18:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:18:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:18:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:18:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:18:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:18:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:18:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:18:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:18:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:18:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:18:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:18:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:18:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:18:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:18:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:18:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:18:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:18:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:18:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:18:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:18:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:18:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:18:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:18:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:18:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:18:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0378] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0383] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0390] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0529] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0551] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0553] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0653] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0678] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0699] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0702] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0704] Config: added 'scan_ssid' value '1'
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0704] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0706] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.0707] Config: added 'psk' value '<hidden>'
Oct 11 12:18:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/258
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.1429] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:18:26 IQ138000 NetworkManager[403]: <info>  [1760185106.1432] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:51 IQ138000 NetworkManager[403]: <warn>  [1760185131.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:18:51 IQ138000 NetworkManager[403]: <info>  [1760185131.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:18:51 IQ138000 NetworkManager[403]: <warn>  [1760185131.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:18:51 IQ138000 NetworkManager[403]: <info>  [1760185131.0275] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:18:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/258
Oct 11 12:18:51 IQ138000 NetworkManager[403]: <info>  [1760185131.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:18:51 IQ138000 NetworkManager[403]: <info>  [1760185131.0709] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:18:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:18:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:18:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:18:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:18:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:18:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:18:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:18:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:18:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:18:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:18:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:18:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:18:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:18:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:18:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:18:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:18:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:18:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:18:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:18:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:18:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:18:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:18:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:18:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:18:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:18:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:18:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:18:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:18:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:18:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:18:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:18:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:18:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:18:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:18:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:18:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:18:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:18:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:18:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:56 IQ138000 NetworkManager[403]: <info>  [1760185136.7810] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:18:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:18:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:19:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:16 IQ138000 wb-watchdog[18645]: [INFO] Interval #363 started. Waiting up to 60 seconds for error...
Oct 11 12:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:19:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:19:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:19:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:19:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:19:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:19:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:19:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:19:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:19:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:19:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:19:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:19:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:19:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:19:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:19:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:19:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:19:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:19:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:19:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:19:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:19:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:19:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:19:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:19:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:19:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:19:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:19:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:19:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:19:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:19:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:19:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:19:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:19:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:19:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:19:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:19:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:19:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:19:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:19:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:19:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7048] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7052] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7058] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7143] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7162] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7164] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7259] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7281] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7299] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7303] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7304] Config: added 'scan_ssid' value '1'
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7305] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7306] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7307] Config: added 'psk' value '<hidden>'
Oct 11 12:19:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/259
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7997] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:19:51 IQ138000 NetworkManager[403]: <info>  [1760185191.7999] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:19:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:19:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:19:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:19:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:19:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:19:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:19:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:19:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:19:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:19:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:19:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:19:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:19:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:19:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:19:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:19:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:19:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:19:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:19:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:19:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:19:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:19:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:19:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:19:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:19:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:19:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:19:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:19:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:19:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:19:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:19:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:19:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:19:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:19:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:19:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:19:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:19:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:19:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:16 IQ138000 wb-watchdog[19359]: [INFO] Interval #364 started. Waiting up to 60 seconds for error...
Oct 11 12:20:17 IQ138000 NetworkManager[403]: <warn>  [1760185217.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:20:17 IQ138000 NetworkManager[403]: <info>  [1760185217.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:20:17 IQ138000 NetworkManager[403]: <warn>  [1760185217.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:20:17 IQ138000 NetworkManager[403]: <info>  [1760185217.0251] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:20:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/259
Oct 11 12:20:17 IQ138000 NetworkManager[403]: <info>  [1760185217.0618] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:20:17 IQ138000 NetworkManager[403]: <info>  [1760185217.0620] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:20:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:20:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:20:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:20:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:20:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:20:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:20:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:20:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:20:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:20:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:20:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:20:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:20:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:20:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:20:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:20:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:20:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:20:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:20:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:20:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:20:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:20:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:20:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:20:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:20:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:20:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:20:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:20:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:20:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:20:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:20:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:20:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:20:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:20:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:20:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:20:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:20:23 IQ138000 NetworkManager[403]: <info>  [1760185223.4637] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:20:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:29 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:20:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:20:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:20:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:20:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:20:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:20:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:20:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:20:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:20:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:20:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:20:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:20:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:20:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:20:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:20:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:20:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:20:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:20:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:20:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:20:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:20:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:20:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:20:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:20:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:20:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:20:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:20:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:20:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:20:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:20:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:20:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:20:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:20:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:20:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:20:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:20:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:20:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:20:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:20:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:20:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:20:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:21:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:16 IQ138000 wb-watchdog[19963]: [INFO] Interval #365 started. Waiting up to 60 seconds for error...
Oct 11 12:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.3895] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.3901] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.3908] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.3966] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.3984] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.3986] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4086] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4110] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4128] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4131] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4132] Config: added 'scan_ssid' value '1'
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4133] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4135] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.4135] Config: added 'psk' value '<hidden>'
Oct 11 12:21:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/260
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.5057] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:21:18 IQ138000 NetworkManager[403]: <info>  [1760185278.5060] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:21:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:21:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:21:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:21:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:21:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:21:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:21:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:21:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:21:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:21:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:21:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:21:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:21:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:21:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:21:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:21:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:21:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:21:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:21:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:21:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:21:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:21:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:21:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:21:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:21:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:21:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:21:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:21:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:21:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:21:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:21:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:21:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:21:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:21:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:21:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:21:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:21:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_40/External Sensor 1, row count 7183, limit 7042
Oct 11 12:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:21:44 IQ138000 NetworkManager[403]: <warn>  [1760185304.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:21:44 IQ138000 NetworkManager[403]: <info>  [1760185304.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:21:44 IQ138000 NetworkManager[403]: <warn>  [1760185304.0264] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:21:44 IQ138000 NetworkManager[403]: <info>  [1760185304.0303] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:21:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:21:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/260
Oct 11 12:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:44 IQ138000 NetworkManager[403]: <info>  [1760185304.0799] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:21:44 IQ138000 NetworkManager[403]: <info>  [1760185304.0801] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:21:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:21:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:21:50 IQ138000 NetworkManager[403]: <info>  [1760185310.1728] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:21:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:21:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:21:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:21:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:21:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:21:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:21:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:21:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:21:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:21:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:21:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:21:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:21:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:21:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:21:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:21:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:21:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:21:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:21:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:21:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:21:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:21:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:21:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:21:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:21:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:21:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:21:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:21:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:21:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:21:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:21:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:21:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:21:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:21:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:21:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:22:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:22:17 IQ138000 wb-watchdog[20671]: [INFO] Interval #366 started. Waiting up to 60 seconds for error...
Oct 11 12:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:22:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:22:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:22:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:22:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:22:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:22:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:22:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:22:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:22:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:22:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:22:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:22:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:22:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:22:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:22:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:22:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:22:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:22:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:22:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:22:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:22:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:22:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:22:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:22:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:22:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:22:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:22:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:22:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:22:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:22:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:22:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:22:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:22:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:22:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:22:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:22:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:22:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:22:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3368] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3373] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3378] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3433] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3466] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3468] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3560] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3603] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3648] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3652] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3653] Config: added 'scan_ssid' value '1'
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3654] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3655] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:22:45 IQ138000 NetworkManager[403]: <info>  [1760185365.3656] Config: added 'psk' value '<hidden>'
Oct 11 12:22:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/261
Oct 11 12:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:22:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:49 IQ138000 NetworkManager[403]: <info>  [1760185369.4509] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:22:49 IQ138000 NetworkManager[403]: <info>  [1760185369.4512] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:22:52 IQ138000 npm[3801]: [2025-10-11 12:22:52] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":36.11,"last_seen":1760185372371,"linkquality":91,"power_outage_count":48745,"temperature":27.29,"voltage":3025}'
Oct 11 12:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:22:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:22:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:22:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:22:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:22:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:22:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:22:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:22:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:22:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:22:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:22:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:22:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:22:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:22:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:22:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:22:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:22:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:22:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:22:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:22:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:22:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:22:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:22:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:22:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:22:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:22:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:22:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:22:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:22:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:22:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:22:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:22:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:22:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:22:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:22:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:22:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:22:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:22:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L1, row count 7183, limit 7042
Oct 11 12:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:23:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:11 IQ138000 NetworkManager[403]: <warn>  [1760185391.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:23:11 IQ138000 NetworkManager[403]: <info>  [1760185391.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:23:11 IQ138000 NetworkManager[403]: <warn>  [1760185391.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:23:11 IQ138000 NetworkManager[403]: <info>  [1760185391.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:23:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/261
Oct 11 12:23:11 IQ138000 NetworkManager[403]: <info>  [1760185391.0648] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:23:11 IQ138000 NetworkManager[403]: <info>  [1760185391.0650] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:17 IQ138000 NetworkManager[403]: <info>  [1760185397.1634] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:23:17 IQ138000 wb-watchdog[21299]: [INFO] Interval #367 started. Waiting up to 60 seconds for error...
Oct 11 12:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:23:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:23:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:23:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:23:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:23:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:23:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:23:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:23:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:23:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:23:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:23:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:23:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:23:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:23:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:23:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:23:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:23:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:23:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:23:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:23:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:23:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:23:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:23:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:23:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:23:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:23:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:23:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:23:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:23:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:23:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:23:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:23:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:23:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:23:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:23:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:23:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:23:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:23:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:23:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:23:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:23:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:23:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:23:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:23:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:23:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:23:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:23:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:23:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:23:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:23:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:23:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:23:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:23:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:23:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:23:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:23:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:23:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:23:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:23:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:23:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:23:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:23:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:23:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:23:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:23:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:23:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:23:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:23:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:23:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:23:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:23:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:23:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:23:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:23:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:23:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:23:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:23:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:23:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:23:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2036] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2041] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2054] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2135] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2158] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2160] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2249] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2272] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2317] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2326] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2330] Config: added 'scan_ssid' value '1'
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2332] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2336] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.2340] Config: added 'psk' value '<hidden>'
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/262
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.3882] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:24:12 IQ138000 NetworkManager[403]: <info>  [1760185452.3885] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:24:17 IQ138000 wb-watchdog[21982]: [INFO] Interval #368 started. Waiting up to 60 seconds for error...
Oct 11 12:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:24:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:24:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:24:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:24:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:24:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:24:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:24:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:24:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:24:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:24:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:24:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:24:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:24:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:24:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:24:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:24:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:24:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:24:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:24:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:24:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:24:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:24:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:24:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:24:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:24:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:24:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:24:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:24:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:24:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:24:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:24:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:24:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:24:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:24:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:24:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:24:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:24:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:37 IQ138000 NetworkManager[403]: <warn>  [1760185477.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:24:37 IQ138000 NetworkManager[403]: <info>  [1760185477.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:24:37 IQ138000 NetworkManager[403]: <warn>  [1760185477.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:24:37 IQ138000 NetworkManager[403]: <info>  [1760185477.0275] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:24:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/262
Oct 11 12:24:37 IQ138000 NetworkManager[403]: <info>  [1760185477.0716] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:24:37 IQ138000 NetworkManager[403]: <info>  [1760185477.0718] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:24:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:24:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:43 IQ138000 NetworkManager[403]: <info>  [1760185483.0654] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:24:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:24:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:24:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:24:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:24:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:24:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:24:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:24:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:24:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:24:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:24:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:24:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:24:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:24:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:24:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:24:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:24:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:24:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:24:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:24:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:24:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:24:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:24:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:24:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:24:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:24:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:24:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:24:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:24:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:24:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:24:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:24:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:24:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:24:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:24:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:24:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:25:01 IQ138000 CRON[22413]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:25:01 IQ138000 CRON[22417]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 12:25:01 IQ138000 CRON[22413]: pam_unix(cron:session): session closed for user root
Oct 11 12:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:25:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:17 IQ138000 wb-watchdog[22626]: [INFO] Interval #369 started. Waiting up to 60 seconds for error...
Oct 11 12:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:25:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:25:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:25:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:25:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:25:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:25:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:25:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:25:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:25:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:25:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:25:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:25:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:25:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:25:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:25:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:25:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:25:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:25:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:25:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:25:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:25:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:25:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:25:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:25:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:25:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:25:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:25:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:25:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:25:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:25:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:25:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:25:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:25:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:25:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:25:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:25:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:25:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:25:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:25:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L3, row count 7183, limit 7042
Oct 11 12:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:25:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.1906] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.1910] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.1917] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.1972] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.1990] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.1992] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2074] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2103] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2133] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2137] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2138] Config: added 'scan_ssid' value '1'
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2139] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2140] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2141] Config: added 'psk' value '<hidden>'
Oct 11 12:25:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/263
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2900] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:25:38 IQ138000 NetworkManager[403]: <info>  [1760185538.2903] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:25:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:25:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:25:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:25:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:25:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:25:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:25:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:25:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:25:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:25:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:25:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:25:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:25:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:25:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:25:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:25:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:25:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:25:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:25:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:25:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:25:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:25:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:25:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:25:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:25:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:25:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:25:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:25:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:25:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:25:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:25:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:25:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:25:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:25:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:25:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:25:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:25:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:25:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:25:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:26:03 IQ138000 NetworkManager[403]: <warn>  [1760185563.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:26:03 IQ138000 NetworkManager[403]: <info>  [1760185563.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:26:03 IQ138000 NetworkManager[403]: <warn>  [1760185563.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:26:03 IQ138000 NetworkManager[403]: <info>  [1760185563.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:26:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/263
Oct 11 12:26:03 IQ138000 NetworkManager[403]: <info>  [1760185563.0658] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:26:03 IQ138000 NetworkManager[403]: <info>  [1760185563.0660] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:26:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:08 IQ138000 NetworkManager[403]: <info>  [1760185568.9176] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:26:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:26:17 IQ138000 wb-watchdog[23316]: [INFO] Interval #370 started. Waiting up to 60 seconds for error...
Oct 11 12:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:26:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:26:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:26:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:26:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:26:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:26:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:26:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:26:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:26:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:26:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:26:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:26:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:26:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:26:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:26:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:26:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:26:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:26:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:26:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:26:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:26:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:26:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:26:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:26:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:26:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:26:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:26:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:26:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:26:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:26:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:26:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:26:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:26:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:26:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:26:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:26:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:26:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:26:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:26:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:26:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:26:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:26:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:26:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:26:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:26:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:26:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:26:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:26:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:26:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:26:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:26:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:26:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:26:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:26:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:26:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:26:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:26:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:26:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:26:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:26:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:26:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:26:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:26:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:26:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:26:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:26:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:26:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:26:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:26:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:26:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:26:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:26:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:26:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:26:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:26:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.7901] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.7933] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.7942] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.7995] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8031] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8033] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8145] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8184] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8231] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8248] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8261] Config: added 'scan_ssid' value '1'
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8274] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8285] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8295] Config: added 'psk' value '<hidden>'
Oct 11 12:27:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/264
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8968] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:27:03 IQ138000 NetworkManager[403]: <info>  [1760185623.8972] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:27:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:27:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:27:17 IQ138000 wb-watchdog[23934]: [INFO] Interval #371 started. Waiting up to 60 seconds for error...
Oct 11 12:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:27:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:27:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:27:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:27:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:27:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:27:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:27:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:27:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:27:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:27:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:27:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:27:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:27:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:27:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:27:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:27:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:27:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:27:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:27:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:27:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:27:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:27:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:27:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:27:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:27:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:27:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:27:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:27:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:27:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:27:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:27:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:27:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:27:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:27:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:27:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:27:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:27:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:27:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:29 IQ138000 NetworkManager[403]: <warn>  [1760185649.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:27:29 IQ138000 NetworkManager[403]: <info>  [1760185649.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:27:29 IQ138000 NetworkManager[403]: <warn>  [1760185649.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:27:29 IQ138000 NetworkManager[403]: <info>  [1760185649.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:27:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/264
Oct 11 12:27:29 IQ138000 NetworkManager[403]: <info>  [1760185649.0653] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:27:29 IQ138000 NetworkManager[403]: <info>  [1760185649.0655] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:27:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:27:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:35 IQ138000 NetworkManager[403]: <info>  [1760185655.5507] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:27:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:27:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:27:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:27:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:27:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:27:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:27:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:27:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:27:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:27:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:27:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:27:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:27:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:27:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:27:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:27:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:27:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:27:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:27:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:27:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:27:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:27:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:27:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:27:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:27:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:27:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:27:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:27:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:27:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:27:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:27:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:27:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:27:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:27:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:27:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:27:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:27:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:27:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:28:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:17 IQ138000 wb-watchdog[24646]: [INFO] Interval #372 started. Waiting up to 60 seconds for error...
Oct 11 12:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:28:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:28:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:28:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:28:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:28:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:28:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:28:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:28:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:28:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:28:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:28:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:28:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:28:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:28:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:28:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:28:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:28:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:28:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:28:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:28:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:28:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:28:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:28:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:28:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:28:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:28:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:28:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:28:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:28:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:28:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:28:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:28:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:28:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:28:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:28:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:28:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:28:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:28:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5384] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5389] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5396] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5451] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5476] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5477] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5594] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5643] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5708] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5712] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5713] Config: added 'scan_ssid' value '1'
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5714] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5715] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.5716] Config: added 'psk' value '<hidden>'
Oct 11 12:28:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/265
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.6419] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:28:30 IQ138000 NetworkManager[403]: <info>  [1760185710.6422] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:28:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:28:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:28:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:56 IQ138000 NetworkManager[403]: <warn>  [1760185736.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:28:56 IQ138000 NetworkManager[403]: <info>  [1760185736.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:28:56 IQ138000 NetworkManager[403]: <warn>  [1760185736.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:28:56 IQ138000 NetworkManager[403]: <info>  [1760185736.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:28:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/265
Oct 11 12:28:56 IQ138000 NetworkManager[403]: <info>  [1760185736.0670] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:28:56 IQ138000 NetworkManager[403]: <info>  [1760185736.0672] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:28:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:28:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:28:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:28:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:28:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:28:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:28:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:28:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:28:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:28:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:28:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:28:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:28:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:28:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:28:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:28:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:28:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:28:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:28:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:28:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:28:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:28:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:28:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:28:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:28:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:28:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:28:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:28:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:28:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:28:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:28:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:28:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:28:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:28:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:28:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:28:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:28:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:29:02 IQ138000 NetworkManager[403]: <info>  [1760185742.2378] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:29:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:17 IQ138000 wb-watchdog[25242]: [INFO] Interval #373 started. Waiting up to 60 seconds for error...
Oct 11 12:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:29:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:29:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:29:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:29:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:29:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:29:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:29:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:29:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:29:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:29:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:29:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:29:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:29:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:29:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:29:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:29:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:29:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:29:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:29:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:29:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:29:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:29:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:29:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:29:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:29:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:29:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:29:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:29:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:29:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:29:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:29:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:29:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:29:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:29:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:29:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:29:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:29:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:29:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4640 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:29:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:29:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:29:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:29:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:29:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:29:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:29:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:29:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:29:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:29:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:29:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:29:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:29:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:29:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:29:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:29:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:29:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:29:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:29:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:29:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:29:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:29:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:29:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:29:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:29:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:29:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:29:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:29:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:29:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:29:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:29:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:29:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:29:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:29:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:29:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:29:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:29:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:29:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:29:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:29:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.2966] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.2977] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.2985] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3042] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3063] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3065] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3222] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3267] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3303] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3307] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3308] Config: added 'scan_ssid' value '1'
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3309] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3311] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.3312] Config: added 'psk' value '<hidden>'
Oct 11 12:29:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/266
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.4069] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:29:57 IQ138000 NetworkManager[403]: <info>  [1760185797.4071] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:30:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:30:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:30:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:30:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:17 IQ138000 wb-watchdog[25961]: [INFO] Interval #374 started. Waiting up to 60 seconds for error...
Oct 11 12:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:23 IQ138000 NetworkManager[403]: <warn>  [1760185823.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:30:23 IQ138000 NetworkManager[403]: <info>  [1760185823.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:30:23 IQ138000 NetworkManager[403]: <warn>  [1760185823.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:30:23 IQ138000 NetworkManager[403]: <info>  [1760185823.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:30:23 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:30:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/266
Oct 11 12:30:23 IQ138000 NetworkManager[403]: <info>  [1760185823.0662] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:30:23 IQ138000 NetworkManager[403]: <info>  [1760185823.0664] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:23 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:30:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:30:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:30:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:30:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:30:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:30:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:30:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:30:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:30:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:30:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:30:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:30:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:30:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:30:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:30:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:30:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:30:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:30:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:30:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:30:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:30:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:30:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:30:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:30:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:30:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:30:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:30:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:30:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:30:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:30:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:30:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:30:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:30:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:30:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:30:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:30:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:29 IQ138000 NetworkManager[403]: <info>  [1760185829.0423] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:30:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:30:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:30:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:30:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:30:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:30:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:30:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:30:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:30:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:30:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:30:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:30:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:30:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:30:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:30:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:30:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:30:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:30:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:30:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:30:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:30:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:30:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:30:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:30:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:30:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:30:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:30:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:30:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:30:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:30:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:30:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:30:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:30:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:30:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:30:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:30:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:30:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:30:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:30:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:30:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:30:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:31:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:31:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:31:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:17 IQ138000 wb-watchdog[26564]: [INFO] Interval #375 started. Waiting up to 60 seconds for error...
Oct 11 12:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1819] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1826] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1835] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1885] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1904] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1906] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.1986] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2007] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2024] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2027] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2028] Config: added 'scan_ssid' value '1'
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2029] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2030] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:31:24 IQ138000 NetworkManager[403]: <info>  [1760185884.2031] Config: added 'psk' value '<hidden>'
Oct 11 12:31:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/267
Oct 11 12:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:27 IQ138000 NetworkManager[403]: <info>  [1760185887.2783] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:31:27 IQ138000 NetworkManager[403]: <info>  [1760185887.2785] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:31:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:31:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:31:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:31:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:31:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:31:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:31:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:31:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:31:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:31:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:31:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:31:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:31:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:31:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:31:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:31:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:31:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:31:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:31:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:31:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:31:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:31:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:31:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:31:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:31:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:31:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:31:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:31:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:31:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:31:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:31:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:31:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:31:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:31:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:31:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:31:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:31:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:31:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:31:49 IQ138000 NetworkManager[403]: <warn>  [1760185909.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:31:49 IQ138000 NetworkManager[403]: <info>  [1760185909.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:31:49 IQ138000 NetworkManager[403]: <warn>  [1760185909.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:31:49 IQ138000 NetworkManager[403]: <info>  [1760185909.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:31:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/267
Oct 11 12:31:49 IQ138000 NetworkManager[403]: <info>  [1760185909.0725] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:31:49 IQ138000 NetworkManager[403]: <info>  [1760185909.0726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:31:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:31:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:54 IQ138000 NetworkManager[403]: <info>  [1760185914.9006] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:31:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:31:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:31:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:31:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:31:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:31:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:31:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:31:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:31:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:31:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:31:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:31:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:31:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:31:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:31:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:31:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:31:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:31:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:31:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:31:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:31:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:31:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:31:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:31:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:31:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:31:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:31:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:31:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:31:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:31:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:31:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:31:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:31:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:31:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:31:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:31:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:32:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:17 IQ138000 wb-watchdog[27266]: [INFO] Interval #376 started. Waiting up to 60 seconds for error...
Oct 11 12:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:32:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:32:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:32:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:32:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:32:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:32:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:32:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:32:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:32:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:32:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:32:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:32:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:32:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:32:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:32:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:32:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:32:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:32:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:32:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:32:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:32:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:32:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:32:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:32:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:32:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:32:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:32:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:32:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:32:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:32:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:32:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:32:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:32:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:32:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:32:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:32:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8553] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8557] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8563] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8630] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8648] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8649] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8759] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8789] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8815] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8819] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8821] Config: added 'scan_ssid' value '1'
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8822] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8823] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.8824] Config: added 'psk' value '<hidden>'
Oct 11 12:32:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/268
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.9537] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:32:49 IQ138000 NetworkManager[403]: <info>  [1760185969.9540] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:32:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:32:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:32:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:32:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:32:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:32:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:32:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:32:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:32:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:32:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:32:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:32:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:32:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:32:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:32:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:32:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:32:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:32:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:32:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:32:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:32:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:32:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:32:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:32:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:32:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:32:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:32:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:32:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:32:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:32:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:32:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:32:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:32:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:32:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:32:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:32:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:32:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8748 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:15 IQ138000 NetworkManager[403]: <warn>  [1760185995.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:33:15 IQ138000 NetworkManager[403]: <info>  [1760185995.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:33:15 IQ138000 NetworkManager[403]: <warn>  [1760185995.0263] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:33:15 IQ138000 NetworkManager[403]: <info>  [1760185995.0316] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:33:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/268
Oct 11 12:33:15 IQ138000 NetworkManager[403]: <info>  [1760185995.0681] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:33:15 IQ138000 NetworkManager[403]: <info>  [1760185995.0683] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:33:17 IQ138000 wb-watchdog[27889]: [INFO] Interval #377 started. Waiting up to 60 seconds for error...
Oct 11 12:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:21 IQ138000 NetworkManager[403]: <info>  [1760186001.6046] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:33:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:33:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:33:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:33:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:33:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:33:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:33:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:33:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:33:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:33:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:33:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:33:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:33:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:33:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:33:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:33:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:33:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:33:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:33:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:33:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:33:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:33:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:33:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:33:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:33:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:33:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:33:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:33:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:33:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:33:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:33:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:33:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:33:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:33:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:33:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:33:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:33:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:33:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:33:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:49 IQ138000 npm[3801]: [2025-10-11 12:33:49] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.61,"last_seen":1760186029664,"linkquality":72,"power_outage_count":25795,"pressure":992.2,"temperature":22.67,"voltage":2995}'
Oct 11 12:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:33:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:33:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:33:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:33:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:33:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:33:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:33:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:33:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:33:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:33:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:33:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:33:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:33:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:33:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:33:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:33:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:33:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:33:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:33:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:33:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:33:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:33:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:33:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:33:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:33:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:33:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:33:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:33:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:33:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:33:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:33:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:33:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:33:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:33:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:33:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:33:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:33:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:33:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:33:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:34:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6065] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6070] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6085] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6149] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6179] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6181] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6273] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6293] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6311] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6315] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6316] Config: added 'scan_ssid' value '1'
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6317] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6319] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.6320] Config: added 'psk' value '<hidden>'
Oct 11 12:34:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/269
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.7051] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:34:16 IQ138000 NetworkManager[403]: <info>  [1760186056.7053] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:34:17 IQ138000 wb-watchdog[28569]: [INFO] Interval #378 started. Waiting up to 60 seconds for error...
Oct 11 12:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:34:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:34:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:34:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:34:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:34:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:34:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:34:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:34:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:34:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:34:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:34:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:34:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:34:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:34:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:34:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:34:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:34:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:34:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:34:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:34:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:34:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:34:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:34:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:34:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:34:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:34:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:34:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:34:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:34:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:34:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:34:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:34:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:34:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:34:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:34:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:34:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:34:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:34:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:34:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:42 IQ138000 NetworkManager[403]: <warn>  [1760186082.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:34:42 IQ138000 NetworkManager[403]: <info>  [1760186082.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:34:42 IQ138000 NetworkManager[403]: <warn>  [1760186082.0284] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:34:42 IQ138000 NetworkManager[403]: <info>  [1760186082.0303] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:34:42 IQ138000 NetworkManager[403]: <info>  [1760186082.0305] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:34:42 IQ138000 NetworkManager[403]: <info>  [1760186082.0330] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:34:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/269
Oct 11 12:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:34:48 IQ138000 NetworkManager[403]: <info>  [1760186088.3413] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:34:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:34:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:34:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:34:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:34:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:34:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:34:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:34:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:34:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:34:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:34:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:34:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:34:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:34:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:34:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:34:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:34:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:34:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:34:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:34:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:34:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:34:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:34:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:34:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:34:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:34:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:34:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:34:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:34:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:34:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:34:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:34:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:34:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:34:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:34:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:34:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:34:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:34:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:34:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:34:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:01 IQ138000 CRON[29000]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:35:01 IQ138000 CRON[29004]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 12:35:01 IQ138000 CRON[29000]: pam_unix(cron:session): session closed for user root
Oct 11 12:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:35:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:35:17 IQ138000 wb-watchdog[29212]: [INFO] Interval #379 started. Waiting up to 60 seconds for error...
Oct 11 12:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:35:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:35:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:35:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:35:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:35:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:35:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:35:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:35:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:35:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:35:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:35:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:35:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:35:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:35:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:35:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:35:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:35:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:35:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:35:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:35:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:35:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:35:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:35:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:35:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:35:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:35:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:35:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:35:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:35:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:35:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:35:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:35:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:35:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:35:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:35:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:35:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:35:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3134] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3150] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3159] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3294] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3355] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3359] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3538] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3577] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3615] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3620] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3621] Config: added 'scan_ssid' value '1'
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3622] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3623] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.3624] Config: added 'psk' value '<hidden>'
Oct 11 12:35:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/270
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.4628] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:35:43 IQ138000 NetworkManager[403]: <info>  [1760186143.4631] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:35:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:35:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:35:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:35:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:35:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:35:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:35:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:35:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:35:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:35:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:35:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:35:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:35:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:35:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:35:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:35:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:35:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:35:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:35:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:35:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:35:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:35:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:35:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:35:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:35:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:35:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:35:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:35:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:35:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:35:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:35:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:35:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:35:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:35:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:35:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:35:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:35:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:35:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:35:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:35:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:35:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:36:09 IQ138000 NetworkManager[403]: <warn>  [1760186169.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:36:09 IQ138000 NetworkManager[403]: <info>  [1760186169.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:36:09 IQ138000 NetworkManager[403]: <warn>  [1760186169.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:36:09 IQ138000 NetworkManager[403]: <info>  [1760186169.0281] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:36:09 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:36:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/270
Oct 11 12:36:09 IQ138000 NetworkManager[403]: <info>  [1760186169.0752] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:36:09 IQ138000 NetworkManager[403]: <info>  [1760186169.0766] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:09 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:36:15 IQ138000 NetworkManager[403]: <info>  [1760186175.0785] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:17 IQ138000 wb-watchdog[29900]: [INFO] Interval #380 started. Waiting up to 60 seconds for error...
Oct 11 12:36:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:36:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:36:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:36:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:36:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:36:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:36:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:36:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:36:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:36:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:36:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:36:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:36:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:36:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:36:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:36:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:36:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:36:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:36:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:36:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:36:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:36:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:36:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:36:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:36:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:36:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:36:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:36:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:36:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:36:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:36:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:36:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:36:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:36:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:36:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:36:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:36:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:36:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:36:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:36:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:36:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:36:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:36:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:36:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:36:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:36:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:36:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:36:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:36:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:36:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:36:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:36:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:36:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:36:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:36:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:36:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:36:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:36:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:36:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:36:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:36:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:36:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:36:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:36:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:36:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:36:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:36:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:36:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:36:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:36:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:36:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:36:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:36:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:36:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:36:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:36:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:36:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:36:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:36:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:36:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:37:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9752] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9756] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9761] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9816] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9841] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9843] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9925] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9942] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9957] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9961] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9962] Config: added 'scan_ssid' value '1'
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9963] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9964] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:37:09 IQ138000 NetworkManager[403]: <info>  [1760186229.9966] Config: added 'psk' value '<hidden>'
Oct 11 12:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:37:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/271
Oct 11 12:37:10 IQ138000 NetworkManager[403]: <info>  [1760186230.0787] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:37:10 IQ138000 NetworkManager[403]: <info>  [1760186230.0789] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:17 IQ138000 wb-watchdog[30526]: [INFO] Interval #381 started. Waiting up to 60 seconds for error...
Oct 11 12:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:37:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:37:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:37:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:37:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:37:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:37:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:37:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:37:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:37:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:37:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:37:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:37:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:37:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:37:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:37:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:37:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:37:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:37:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:37:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:37:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:37:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:37:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:37:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:37:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:37:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:37:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:37:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:37:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:37:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:37:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:37:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:37:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:37:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:37:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:37:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:37:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:37:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:37:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:37:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:37:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:35 IQ138000 NetworkManager[403]: <warn>  [1760186255.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:37:35 IQ138000 NetworkManager[403]: <info>  [1760186255.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:37:35 IQ138000 NetworkManager[403]: <warn>  [1760186255.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:37:35 IQ138000 NetworkManager[403]: <info>  [1760186255.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:37:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/271
Oct 11 12:37:35 IQ138000 NetworkManager[403]: <info>  [1760186255.0723] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:37:35 IQ138000 NetworkManager[403]: <info>  [1760186255.0725] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d0007e48747/last_seen, row count 7183, limit 7042
Oct 11 12:37:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L1, row count 7183, limit 7042
Oct 11 12:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:37:40 IQ138000 NetworkManager[403]: <info>  [1760186260.6811] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:38:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:38:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:38:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:38:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:38:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:38:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:38:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:38:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:38:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:38:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:38:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:38:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:38:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:38:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:38:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:38:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:38:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:38:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:38:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:38:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:38:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:38:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:38:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:38:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:38:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:38:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:38:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:38:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:38:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:38:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:38:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:38:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:38:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:38:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:38:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:38:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:38:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:38:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:01 IQ138000 CRON[31010]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:38:01 IQ138000 CRON[31014]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 12:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17432 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:38:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:08 IQ138000 sSMTP[31037]: Unable to locate mail
Oct 11 12:38:08 IQ138000 cron[31037]: sendmail: Cannot open mail:25
Oct 11 12:38:08 IQ138000 sSMTP[31037]: Cannot open mail:25
Oct 11 12:38:08 IQ138000 CRON[31010]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 12:38:08 IQ138000 CRON[31010]: pam_unix(cron:session): session closed for user root
Oct 11 12:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:38:17 IQ138000 wb-watchdog[31239]: [INFO] Interval #382 started. Waiting up to 60 seconds for error...
Oct 11 12:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:38:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:38:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:38:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:38:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:38:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:38:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:38:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:38:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:38:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:38:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:38:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:38:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:38:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:38:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:38:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:38:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:38:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:38:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:38:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:38:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:38:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:38:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:38:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:38:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:38:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:38:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:38:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:38:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:38:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:38:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:38:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:38:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:38:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:38:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:38:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:38:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:38:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6086] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6091] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6099] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6156] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6174] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6176] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6254] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6273] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6293] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6296] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6297] Config: added 'scan_ssid' value '1'
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6300] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6301] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.6302] Config: added 'psk' value '<hidden>'
Oct 11 12:38:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/272
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.7035] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:38:35 IQ138000 NetworkManager[403]: <info>  [1760186315.7037] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:38:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:38:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:38:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:39:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:39:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:39:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:39:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:39:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:39:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:39:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:39:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:39:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:39:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:39:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:39:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:39:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:39:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:39:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:39:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:39:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:39:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:39:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:39:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:39:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:39:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:39:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:39:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:39:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:39:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:39:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:39:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:39:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:39:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:39:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:39:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:39:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:39:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:39:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:39:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:39:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:39:01 IQ138000 NetworkManager[403]: <warn>  [1760186341.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:39:01 IQ138000 NetworkManager[403]: <info>  [1760186341.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:39:01 IQ138000 NetworkManager[403]: <warn>  [1760186341.0236] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:39:01 IQ138000 NetworkManager[403]: <info>  [1760186341.0250] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:39:01 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:39:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/272
Oct 11 12:39:01 IQ138000 NetworkManager[403]: <info>  [1760186341.0612] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:39:01 IQ138000 NetworkManager[403]: <info>  [1760186341.0614] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:01 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:39:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:39:07 IQ138000 NetworkManager[403]: <info>  [1760186347.3323] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 12:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:39:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:17 IQ138000 wb-watchdog[31838]: [INFO] Interval #383 started. Waiting up to 60 seconds for error...
Oct 11 12:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:39:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:39:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:39:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:39:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:39:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:39:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:39:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:39:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:39:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:39:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:39:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:39:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:39:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:39:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:39:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:39:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:39:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:39:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:39:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:39:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:39:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:39:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:39:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:39:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:39:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:39:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:39:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:39:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:39:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:39:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:39:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:39:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:39:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:39:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:39:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:39:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:39:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 12:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:39:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:39:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:39:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:39:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:39:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:40:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:40:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:40:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:40:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:40:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:40:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:40:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:40:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:40:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:40:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:40:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:40:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:40:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:40:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:40:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:40:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:40:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:40:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:40:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:40:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:40:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:40:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:40:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:40:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:40:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:40:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:40:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:40:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:40:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:40:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:40:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:40:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:40:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:40:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:40:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:40:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:40:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1438] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1443] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1449] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1522] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1539] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1541] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1665] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1709] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1742] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1745] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1748] Config: added 'scan_ssid' value '1'
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1749] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1750] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:40:02 IQ138000 NetworkManager[403]: <info>  [1760186402.1751] Config: added 'psk' value '<hidden>'
Oct 11 12:40:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/273
Oct 11 12:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:05 IQ138000 NetworkManager[403]: <info>  [1760186405.2592] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:40:05 IQ138000 NetworkManager[403]: <info>  [1760186405.2594] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:40:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:17 IQ138000 wb-watchdog[32551]: [INFO] Interval #384 started. Waiting up to 60 seconds for error...
Oct 11 12:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:27 IQ138000 NetworkManager[403]: <warn>  [1760186427.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:40:27 IQ138000 NetworkManager[403]: <info>  [1760186427.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:40:27 IQ138000 NetworkManager[403]: <warn>  [1760186427.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:40:27 IQ138000 NetworkManager[403]: <info>  [1760186427.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:40:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/273
Oct 11 12:40:27 IQ138000 NetworkManager[403]: <info>  [1760186427.0782] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:40:27 IQ138000 NetworkManager[403]: <info>  [1760186427.0784] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:40:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:40:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:40:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:40:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:40:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:40:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:40:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:40:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:40:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:40:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:40:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:40:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:40:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:40:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:40:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:40:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:40:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:40:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:40:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:40:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:40:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:40:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:40:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:40:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:40:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:40:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:40:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:40:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:40:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:40:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:40:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:40:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:40:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:40:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:40:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:40:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:40:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:40:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:40:32 IQ138000 NetworkManager[403]: <info>  [1760186432.8517] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:40:39 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:40:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:40:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:40:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:40:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:41:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:41:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:41:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:41:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:41:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:41:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:41:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:41:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:41:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:41:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:41:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:41:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:41:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:41:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:41:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:41:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:41:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:41:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:41:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:41:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:41:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:41:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:41:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:41:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:41:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:41:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:41:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:41:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:41:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:41:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:41:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:41:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:41:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:41:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:41:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:41:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:41:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:41:17 IQ138000 wb-watchdog[706]: [INFO] Interval #385 started. Waiting up to 60 seconds for error...
Oct 11 12:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:41:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:41:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.7809] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.7814] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.7820] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.7872] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.7902] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.7906] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8066] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8085] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8112] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8116] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8117] Config: added 'scan_ssid' value '1'
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8118] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8119] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8120] Config: added 'psk' value '<hidden>'
Oct 11 12:41:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/274
Oct 11 12:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8958] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:41:27 IQ138000 NetworkManager[403]: <info>  [1760186487.8965] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:41:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:41:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:41:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:41:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:41:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:41:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:41:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:41:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:41:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:41:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:41:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:41:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:41:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:41:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:41:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:41:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:41:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:41:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:41:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:41:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:41:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:41:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:41:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:41:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:41:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:41:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:41:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:41:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:41:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:41:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:41:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:41:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:41:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:41:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:41:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:41:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:41:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:41:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:41:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:41:53 IQ138000 NetworkManager[403]: <warn>  [1760186513.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:41:53 IQ138000 NetworkManager[403]: <info>  [1760186513.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:41:53 IQ138000 NetworkManager[403]: <warn>  [1760186513.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:41:53 IQ138000 NetworkManager[403]: <info>  [1760186513.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:41:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/274
Oct 11 12:41:53 IQ138000 NetworkManager[403]: <info>  [1760186513.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:41:53 IQ138000 NetworkManager[403]: <info>  [1760186513.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:41:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:41:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:41:59 IQ138000 NetworkManager[403]: <info>  [1760186519.5216] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:42:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:42:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:42:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:42:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:42:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:42:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:42:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:42:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:42:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:42:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:42:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:42:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:42:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:42:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:42:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:42:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:42:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:42:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:42:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:42:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:42:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:42:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:42:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:42:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:42:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:42:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:42:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:42:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:42:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:42:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:42:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:42:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:42:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:42:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:42:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:42:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:42:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:42:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:17 IQ138000 wb-watchdog[1423]: [INFO] Interval #386 started. Waiting up to 60 seconds for error...
Oct 11 12:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:42:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:42:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:42:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:42:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:42:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:42:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:42:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:42:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:42:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:42:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:42:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:42:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:42:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:42:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:42:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:42:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:42:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:42:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:42:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:42:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:42:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:42:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:42:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:42:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:42:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:42:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:42:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:42:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:42:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:42:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:42:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:42:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:42:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:42:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:42:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:42:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:42:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:42:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:42:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:42:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:42:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:42:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:42:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4480] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4485] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4490] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4557] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4575] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4577] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4741] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4789] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4829] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4832] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4834] Config: added 'scan_ssid' value '1'
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4834] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4836] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.4837] Config: added 'psk' value '<hidden>'
Oct 11 12:42:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/275
Oct 11 12:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.5689] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:42:54 IQ138000 NetworkManager[403]: <info>  [1760186574.5691] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:42:57 IQ138000 npm[3801]: [2025-10-11 12:42:57] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.39,"last_seen":1760186577830,"linkquality":54,"power_outage_count":35250,"temperature":24.32,"voltage":3075}'
Oct 11 12:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:43:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:43:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:43:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:43:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:43:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:43:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:43:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:43:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:43:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:43:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:43:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:43:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:43:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:43:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:43:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:43:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:43:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:43:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:43:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:43:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:43:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:43:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:43:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:43:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:43:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:43:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:43:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:43:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:43:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:43:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:43:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:43:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:43:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:43:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:43:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:43:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:43:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:43:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 12:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:17 IQ138000 wb-watchdog[2066]: [INFO] Interval #387 started. Waiting up to 60 seconds for error...
Oct 11 12:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 12:43:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 12:43:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 12:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:20 IQ138000 NetworkManager[403]: <warn>  [1760186600.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:43:20 IQ138000 NetworkManager[403]: <info>  [1760186600.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:43:20 IQ138000 NetworkManager[403]: <warn>  [1760186600.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:43:20 IQ138000 NetworkManager[403]: <info>  [1760186600.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:43:20 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:43:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/275
Oct 11 12:43:20 IQ138000 NetworkManager[403]: <info>  [1760186600.0685] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:43:20 IQ138000 NetworkManager[403]: <info>  [1760186600.0687] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:20 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:26 IQ138000 NetworkManager[403]: <info>  [1760186606.1643] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:43:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:43:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:43:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:43:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:43:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:43:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:43:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:43:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:43:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:43:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:43:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:43:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:43:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:43:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:43:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:43:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:43:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:43:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:43:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:43:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:43:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:43:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:43:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:43:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:43:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:43:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:43:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:43:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:43:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:43:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:43:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:43:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:43:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:43:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:43:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:43:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:43:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L1, row count 7183, limit 7042
Oct 11 12:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:43:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:43:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8344 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:43:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:43:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:44:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:44:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:44:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:44:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:44:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:44:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:44:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:44:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:44:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:44:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:44:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:44:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:44:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:44:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:44:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:44:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:44:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:44:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:44:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:44:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:44:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:44:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:44:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:44:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:44:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:44:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:44:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:44:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:44:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:44:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:44:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:44:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:44:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:44:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:44:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:44:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:44:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:17 IQ138000 wb-watchdog[2798]: [INFO] Interval #388 started. Waiting up to 60 seconds for error...
Oct 11 12:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2258] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2262] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2268] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2344] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2360] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2362] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2440] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2504] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2520] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2524] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2525] Config: added 'scan_ssid' value '1'
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2526] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2527] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:44:21 IQ138000 NetworkManager[403]: <info>  [1760186661.2528] Config: added 'psk' value '<hidden>'
Oct 11 12:44:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/276
Oct 11 12:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:25 IQ138000 NetworkManager[403]: <info>  [1760186665.3247] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:44:25 IQ138000 NetworkManager[403]: <info>  [1760186665.3251] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:44:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:44:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:44:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:44:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:44:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:44:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:44:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:44:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:44:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:44:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:44:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:44:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:44:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:44:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:44:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:44:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:44:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:44:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:44:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:44:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:44:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:44:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:44:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:44:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:44:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:44:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:44:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:44:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:44:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:44:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:44:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:44:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:44:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:44:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:44:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:44:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:44:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:44:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:44:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:44:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:46 IQ138000 NetworkManager[403]: <warn>  [1760186686.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:44:46 IQ138000 NetworkManager[403]: <info>  [1760186686.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:44:46 IQ138000 NetworkManager[403]: <warn>  [1760186686.0305] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:44:46 IQ138000 NetworkManager[403]: <info>  [1760186686.0326] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:44:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/276
Oct 11 12:44:46 IQ138000 NetworkManager[403]: <info>  [1760186686.0767] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:44:46 IQ138000 NetworkManager[403]: <info>  [1760186686.0769] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:51 IQ138000 NetworkManager[403]: <info>  [1760186691.9877] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 12:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 12:44:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 12:44:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 12:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:45:01 IQ138000 CRON[3224]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:45:01 IQ138000 CRON[3228]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 12:45:01 IQ138000 CRON[3224]: pam_unix(cron:session): session closed for user root
Oct 11 12:45:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:45:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:45:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:45:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:45:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:45:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:45:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:45:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:45:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:45:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:45:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:45:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:45:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:45:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:45:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:45:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:45:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:45:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:45:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:45:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:45:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:45:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:45:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:45:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:45:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:45:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:45:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:45:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:45:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:45:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:45:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:45:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:45:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:45:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:45:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:45:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:45:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:45:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:45:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:45:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:45:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:17 IQ138000 wb-watchdog[3451]: [INFO] Interval #389 started. Waiting up to 60 seconds for error...
Oct 11 12:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:45:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:45:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:45:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:45:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:45:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:45:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:45:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:45:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:45:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:45:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:45:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:45:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:45:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:45:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:45:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:45:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:45:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:45:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:45:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:45:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:45:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:45:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:45:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:45:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:45:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:45:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:45:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:45:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:45:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:45:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:45:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:45:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:45:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:45:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:45:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:45:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:45:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:45:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:45:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:45:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.1817] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.1842] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.1852] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.1960] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.1991] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.1992] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2088] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2107] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2136] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2140] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2141] Config: added 'scan_ssid' value '1'
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2141] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2143] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2144] Config: added 'psk' value '<hidden>'
Oct 11 12:45:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/277
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2863] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:45:47 IQ138000 NetworkManager[403]: <info>  [1760186747.2867] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12836 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:46:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:46:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:46:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:46:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:46:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:46:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:46:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:46:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:46:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:46:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:46:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:46:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:46:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:46:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:46:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:46:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:46:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:46:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:46:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:46:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:46:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:46:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:46:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:46:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:46:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:46:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:46:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:46:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:46:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:46:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:46:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:46:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:46:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:46:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:46:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:46:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:46:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:46:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:46:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:12 IQ138000 NetworkManager[403]: <warn>  [1760186772.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:46:12 IQ138000 NetworkManager[403]: <info>  [1760186772.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:46:12 IQ138000 NetworkManager[403]: <warn>  [1760186772.0262] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:46:12 IQ138000 NetworkManager[403]: <info>  [1760186772.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:46:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/277
Oct 11 12:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:12 IQ138000 NetworkManager[403]: <info>  [1760186772.1776] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:46:12 IQ138000 NetworkManager[403]: <info>  [1760186772.1778] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:46:17 IQ138000 wb-watchdog[4161]: [INFO] Interval #390 started. Waiting up to 60 seconds for error...
Oct 11 12:46:17 IQ138000 NetworkManager[403]: <info>  [1760186777.9246] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:46:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:46:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:46:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:46:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:46:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:46:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:46:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:46:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:46:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:46:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:46:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:46:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:46:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:46:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:46:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:46:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:46:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:46:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:46:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:46:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:46:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:46:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:46:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:46:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:46:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:46:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:46:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:46:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:46:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:46:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:46:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:46:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:46:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:46:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:46:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:46:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:47:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:47:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:47:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:47:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:47:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:47:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:47:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:47:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:47:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:47:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:47:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:47:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:47:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:47:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:47:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:47:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:47:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:47:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:47:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:47:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:47:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:47:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:47:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:47:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:47:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:47:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:47:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:47:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:47:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:47:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:47:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:47:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:47:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:47:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:47:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:47:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:47:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:47:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8605] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8610] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8616] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8673] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8707] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8709] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8815] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8834] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8856] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8860] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8861] Config: added 'scan_ssid' value '1'
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8862] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8863] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.8864] Config: added 'psk' value '<hidden>'
Oct 11 12:47:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/278
Oct 11 12:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.9623] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:47:12 IQ138000 NetworkManager[403]: <info>  [1760186832.9625] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:17 IQ138000 wb-watchdog[4812]: [INFO] Interval #391 started. Waiting up to 60 seconds for error...
Oct 11 12:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:47:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:47:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:47:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:47:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:47:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:47:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:47:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:47:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:47:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:47:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:47:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:47:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:47:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:47:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:47:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:47:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:47:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:47:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:47:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:47:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:47:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:47:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:47:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:47:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:47:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:47:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:47:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:47:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:47:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:47:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:47:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:47:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:47:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:47:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L1, row count 7183, limit 7042
Oct 11 12:47:38 IQ138000 NetworkManager[403]: <warn>  [1760186858.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:47:38 IQ138000 NetworkManager[403]: <info>  [1760186858.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:47:38 IQ138000 NetworkManager[403]: <warn>  [1760186858.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:47:38 IQ138000 NetworkManager[403]: <info>  [1760186858.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:47:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/278
Oct 11 12:47:38 IQ138000 NetworkManager[403]: <info>  [1760186858.0697] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:47:38 IQ138000 NetworkManager[403]: <info>  [1760186858.0700] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:47:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:47:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:43 IQ138000 NetworkManager[403]: <info>  [1760186863.6689] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:47:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:47:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:47:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:48:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:48:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:48:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:48:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:48:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:48:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:48:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:48:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:48:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:48:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:48:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:48:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:48:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:48:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:48:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:48:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:48:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:48:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:48:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:48:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:48:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:48:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:48:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:48:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:48:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:48:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:48:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:48:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:48:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:48:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:48:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:48:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:48:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:48:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:48:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:48:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:48:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:48:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:17 IQ138000 wb-watchdog[5528]: [INFO] Interval #392 started. Waiting up to 60 seconds for error...
Oct 11 12:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:48:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:48:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:48:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:48:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:48:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:48:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:48:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:48:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:48:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:48:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:48:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:48:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:48:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:48:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:48:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:48:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:48:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:48:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:48:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:48:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:48:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:48:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:48:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:48:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:48:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:48:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:48:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:48:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:48:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:48:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:48:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:48:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:48:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:48:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:48:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:48:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:48:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:48:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:48:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.5908] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.5924] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.5934] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6004] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6028] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6030] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6139] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6163] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6191] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6196] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6197] Config: added 'scan_ssid' value '1'
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6200] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6204] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6205] Config: added 'psk' value '<hidden>'
Oct 11 12:48:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/279
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6919] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:48:38 IQ138000 NetworkManager[403]: <info>  [1760186918.6921] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:48:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:48:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:48:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:48:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:49:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:49:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:49:04 IQ138000 NetworkManager[403]: <warn>  [1760186944.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:49:04 IQ138000 NetworkManager[403]: <info>  [1760186944.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:49:04 IQ138000 NetworkManager[403]: <warn>  [1760186944.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:49:04 IQ138000 NetworkManager[403]: <info>  [1760186944.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:49:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/279
Oct 11 12:49:04 IQ138000 NetworkManager[403]: <info>  [1760186944.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:49:04 IQ138000 NetworkManager[403]: <info>  [1760186944.0702] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:49:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:49:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:49:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:49:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:49:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:49:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:49:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:49:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:49:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:49:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:49:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:49:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:49:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:49:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:49:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:49:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:49:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:49:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:49:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:49:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:49:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:49:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:49:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:49:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:49:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:49:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:49:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:49:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:49:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:49:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:49:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:49:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:49:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:49:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:49:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:49:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:49:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:10 IQ138000 NetworkManager[403]: <info>  [1760186950.3442] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:17 IQ138000 wb-watchdog[6146]: [INFO] Interval #393 started. Waiting up to 60 seconds for error...
Oct 11 12:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:49:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:49:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:49:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:49:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:49:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:49:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:49:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:49:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:49:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:49:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:49:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:49:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:49:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:49:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:49:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:49:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:49:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:49:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:49:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:49:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:49:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:49:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:49:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:49:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:49:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:49:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:49:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:49:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:49:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:49:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:49:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:49:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:49:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:49:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:49:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:49:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:49:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:49:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:49:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:49:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:49:50 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 12:49:50 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 11 12:49:50 IQ138000 systemd[1]: data-handler.service: Consumed 29.175s CPU time.
Oct 11 12:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:50:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:50:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:50:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:50:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:50:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:50:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:50:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:50:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:50:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:50:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:50:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:50:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:50:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:50:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:50:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:50:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:50:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:50:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:50:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:50:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:50:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:50:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:50:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:50:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:50:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:50:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:50:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:50:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:50:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:50:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:50:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:50:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:50:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:50:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:50:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:50:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4114] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4125] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4147] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4326] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4364] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4366] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4592] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4663] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:50:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/280
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4685] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4690] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4691] Config: added 'scan_ssid' value '1'
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4692] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4694] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.4695] Config: added 'psk' value '<hidden>'
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.5479] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:50:05 IQ138000 NetworkManager[403]: <info>  [1760187005.5482] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:17 IQ138000 wb-watchdog[6867]: [INFO] Interval #394 started. Waiting up to 60 seconds for error...
Oct 11 12:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:50:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:50:31 IQ138000 NetworkManager[403]: <warn>  [1760187031.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:50:31 IQ138000 NetworkManager[403]: <info>  [1760187031.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:50:31 IQ138000 NetworkManager[403]: <warn>  [1760187031.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:50:31 IQ138000 NetworkManager[403]: <info>  [1760187031.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:50:31 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:50:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/280
Oct 11 12:50:31 IQ138000 NetworkManager[403]: <info>  [1760187031.0663] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:50:31 IQ138000 NetworkManager[403]: <info>  [1760187031.0665] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:31 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:50:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:50:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:50:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:50:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:50:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:50:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:50:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:50:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:50:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:50:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:50:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:50:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:50:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:50:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:50:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:50:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:50:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:50:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:50:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:50:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:50:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:50:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:50:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:50:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:50:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:50:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:50:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:50:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:50:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:50:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:50:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:50:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:50:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:50:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:50:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:50:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:50:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:37 IQ138000 NetworkManager[403]: <info>  [1760187037.1572] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:50:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:50:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:50:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:50 IQ138000 systemd[1]: data-handler.service: Scheduled restart job, restart counter is at 4.
Oct 11 12:50:50 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 11 12:50:50 IQ138000 systemd[1]: data-handler.service: Consumed 29.175s CPU time.
Oct 11 12:50:50 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 12:50:50 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 12:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:51:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:51:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:51:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:51:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:51:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:51:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:51:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:51:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:51:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:51:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:51:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:51:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:51:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:51:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:51:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:51:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:51:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:51:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:51:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:51:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:51:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:51:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:51:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:51:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:51:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:51:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:51:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:51:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:51:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:51:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:51:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:51:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:51:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:51:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:51:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:51:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:17 IQ138000 wb-watchdog[7481]: [INFO] Interval #395 started. Waiting up to 60 seconds for error...
Oct 11 12:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.1978] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.1983] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.1989] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2092] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2161] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2175] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2277] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2314] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2332] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2335] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2336] Config: added 'scan_ssid' value '1'
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2337] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2338] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:51:32 IQ138000 NetworkManager[403]: <info>  [1760187092.2339] Config: added 'psk' value '<hidden>'
Oct 11 12:51:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/281
Oct 11 12:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:51:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:51:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:51:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:51:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:51:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:51:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:51:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:51:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:51:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:51:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:51:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:51:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:51:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:51:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:51:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:51:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:51:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:51:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:51:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:51:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:51:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:51:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:51:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:51:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:51:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:51:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:51:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:51:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:51:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:51:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:51:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:51:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:51:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:51:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:51:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:51:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:51:36 IQ138000 NetworkManager[403]: <info>  [1760187096.3170] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:51:36 IQ138000 NetworkManager[403]: <info>  [1760187096.3173] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:51:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:51:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:51:57 IQ138000 NetworkManager[403]: <warn>  [1760187117.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:51:57 IQ138000 NetworkManager[403]: <info>  [1760187117.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:51:57 IQ138000 NetworkManager[403]: <warn>  [1760187117.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:51:57 IQ138000 NetworkManager[403]: <info>  [1760187117.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:51:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/281
Oct 11 12:51:57 IQ138000 NetworkManager[403]: <info>  [1760187117.0717] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:51:57 IQ138000 NetworkManager[403]: <info>  [1760187117.0720] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:51:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:51:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:02 IQ138000 NetworkManager[403]: <info>  [1760187122.8928] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:52:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:52:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:52:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:52:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:52:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:52:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:52:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:52:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:52:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:52:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:52:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:52:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:52:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:52:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:52:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:52:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:52:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:52:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:52:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:52:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:52:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:52:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:52:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:52:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:52:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:52:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:52:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:52:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:52:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:52:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:52:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:52:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:52:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:52:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:52:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:52:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:52:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:52:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:52:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:52:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:52:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:52:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9226 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:17 IQ138000 wb-watchdog[8175]: [INFO] Interval #396 started. Waiting up to 60 seconds for error...
Oct 11 12:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:52:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:52:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:52:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:52:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:52:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:52:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:52:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:52:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:52:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:52:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:52:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:52:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:52:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:52:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:52:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:52:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:52:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:52:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:52:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:52:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:52:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:52:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:52:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:52:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:52:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:52:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:52:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:52:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:52:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:52:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:52:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:52:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:52:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:52:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:52:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:52:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:52:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:52:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.8816] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.8840] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.8851] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.8920] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.8956] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.8958] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9070] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9098] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9129] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9134] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9135] Config: added 'scan_ssid' value '1'
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9135] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9137] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9137] Config: added 'psk' value '<hidden>'
Oct 11 12:52:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/282
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9793] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:52:57 IQ138000 NetworkManager[403]: <info>  [1760187177.9795] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:52:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:52:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:53:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:53:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:53:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:53:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:53:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:53:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:53:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:53:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:53:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:53:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:53:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:53:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:53:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:53:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:53:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:53:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:53:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:53:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:53:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:53:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:53:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:53:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:53:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:53:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:53:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:53:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:53:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:53:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:53:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:53:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:53:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:53:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:53:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:53:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:53:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:53:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:53:17 IQ138000 wb-watchdog[8805]: [INFO] Interval #397 started. Waiting up to 60 seconds for error...
Oct 11 12:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:53:23 IQ138000 NetworkManager[403]: <warn>  [1760187203.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:53:23 IQ138000 NetworkManager[403]: <info>  [1760187203.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:53:23 IQ138000 NetworkManager[403]: <warn>  [1760187203.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:53:23 IQ138000 NetworkManager[403]: <info>  [1760187203.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:53:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/282
Oct 11 12:53:23 IQ138000 NetworkManager[403]: <info>  [1760187203.0736] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:53:23 IQ138000 NetworkManager[403]: <info>  [1760187203.0739] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:53:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:53:28 IQ138000 NetworkManager[403]: <info>  [1760187208.6384] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:53:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:53:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:53:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:53:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:53:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:53:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:53:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:53:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:53:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:53:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:53:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:53:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:53:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:53:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:53:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:53:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:53:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:53:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:53:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:53:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:53:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:53:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:53:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:53:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:53:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:53:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:53:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:53:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:53:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:53:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:53:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:53:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:53:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:53:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:53:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:53:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:53:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:53:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:53:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:53:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:54:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:54:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:54:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:54:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:54:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:54:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:54:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:54:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:54:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:54:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:54:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:54:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:54:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:54:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:54:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:54:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:54:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:54:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:54:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:54:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:54:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:54:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:54:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:54:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:54:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:54:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:54:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:54:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:54:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:54:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:54:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:54:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:54:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:54:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:54:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:54:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:54:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:54:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:54:17 IQ138000 wb-watchdog[9494]: [INFO] Interval #398 started. Waiting up to 60 seconds for error...
Oct 11 12:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:54:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:54:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.6909] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.6920] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.6927] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.6988] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7005] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7008] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7122] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7156] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7173] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7178] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7179] Config: added 'scan_ssid' value '1'
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7180] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7181] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7182] Config: added 'psk' value '<hidden>'
Oct 11 12:54:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/283
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7923] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:54:23 IQ138000 NetworkManager[403]: <info>  [1760187263.7926] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:54:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:54:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:54:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:54:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:54:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:54:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:54:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:54:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:54:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:54:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:54:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:54:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:54:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:54:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:54:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:54:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:54:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:54:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:54:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:54:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:54:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:54:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:54:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:54:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:54:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:54:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:54:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:54:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:54:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:54:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:54:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:54:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:54:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:54:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:54:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:54:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:54:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:54:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:54:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:54:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:54:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:54:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:54:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:54:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:49 IQ138000 NetworkManager[403]: <warn>  [1760187289.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:54:49 IQ138000 NetworkManager[403]: <info>  [1760187289.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:54:49 IQ138000 NetworkManager[403]: <warn>  [1760187289.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:54:49 IQ138000 NetworkManager[403]: <info>  [1760187289.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:54:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/283
Oct 11 12:54:49 IQ138000 NetworkManager[403]: <info>  [1760187289.0826] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:54:49 IQ138000 NetworkManager[403]: <info>  [1760187289.0828] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:55 IQ138000 NetworkManager[403]: <info>  [1760187295.4222] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:54:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L1, row count 7183, limit 7042
Oct 11 12:54:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_16/External Sensor 1, row count 7183, limit 7042
Oct 11 12:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:55:01 IQ138000 CRON[9909]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 12:55:01 IQ138000 CRON[9913]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 12:55:01 IQ138000 CRON[9909]: pam_unix(cron:session): session closed for user root
Oct 11 12:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:55:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:55:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:55:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:55:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:55:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:55:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:55:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:55:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:55:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:55:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:55:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:55:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:55:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:55:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:55:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:55:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:55:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:55:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:55:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:55:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:55:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:55:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:55:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:55:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:55:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:55:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:55:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:55:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:55:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:55:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:55:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:55:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:55:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:55:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:55:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:55:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:55:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:55:17 IQ138000 wb-watchdog[10134]: [INFO] Interval #399 started. Waiting up to 60 seconds for error...
Oct 11 12:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:55:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:55:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:55:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:55:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:55:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:55:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:55:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:55:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:55:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:55:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:55:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:55:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:55:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:55:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:55:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:55:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:55:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:55:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:55:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:55:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:55:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:55:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:55:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:55:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:55:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:55:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:55:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:55:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:55:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:55:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:55:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:55:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:55:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:55:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:55:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:55:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:55:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:55:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:55:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:55:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.5935] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.5940] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.5947] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6044] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6074] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6086] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6205] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6229] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6246] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6249] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6250] Config: added 'scan_ssid' value '1'
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6251] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6253] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6254] Config: added 'psk' value '<hidden>'
Oct 11 12:55:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/284
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6930] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:55:50 IQ138000 NetworkManager[403]: <info>  [1760187350.6932] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:55:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:55:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:56:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:56:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:56:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:56:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:56:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:56:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:56:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:56:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:56:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:56:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:56:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:56:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:56:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:56:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:56:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:56:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:56:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:56:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:56:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:56:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:56:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:56:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:56:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:56:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:56:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:56:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:56:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:56:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:56:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:56:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:56:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:56:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:56:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:56:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:56:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:56:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:56:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:16 IQ138000 NetworkManager[403]: <warn>  [1760187376.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:56:16 IQ138000 NetworkManager[403]: <info>  [1760187376.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:56:16 IQ138000 NetworkManager[403]: <warn>  [1760187376.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:56:16 IQ138000 NetworkManager[403]: <info>  [1760187376.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:56:16 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:56:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/284
Oct 11 12:56:16 IQ138000 NetworkManager[403]: <info>  [1760187376.0646] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:56:16 IQ138000 NetworkManager[403]: <info>  [1760187376.0648] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:56:16 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 12:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:56:17 IQ138000 wb-watchdog[10822]: [INFO] Interval #400 started. Waiting up to 60 seconds for error...
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:22 IQ138000 NetworkManager[403]: <info>  [1760187382.2969] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:56:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:56:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:56:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:56:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:56:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:56:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:56:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:56:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:56:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:56:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:56:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:56:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:56:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:56:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:56:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:56:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:56:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:56:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:56:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:56:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:56:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:56:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:56:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:56:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:56:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:56:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:56:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:56:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:56:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:56:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:56:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:56:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:56:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:56:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:56:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:56:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:56:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:56:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:56:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:56:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:56:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L3, row count 7183, limit 7042
Oct 11 12:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:57:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:57:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:57:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:57:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:57:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:57:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:57:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:57:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:57:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:57:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:57:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:57:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:57:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:57:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:57:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:57:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:57:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:57:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:57:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:57:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:57:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:57:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:57:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:57:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:57:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:57:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:57:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:57:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:57:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:57:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:57:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:57:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:57:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:57:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:57:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:57:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:57:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:57:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 12:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:57:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:57:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2500] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2516] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2524] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:57:17 IQ138000 wb-watchdog[11435]: [INFO] Interval #401 started. Waiting up to 60 seconds for error...
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2668] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2702] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2707] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2801] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2824] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2843] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2851] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2852] Config: added 'scan_ssid' value '1'
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2853] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2854] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:57:17 IQ138000 NetworkManager[403]: <info>  [1760187437.2856] Config: added 'psk' value '<hidden>'
Oct 11 12:57:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/285
Oct 11 12:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:20 IQ138000 NetworkManager[403]: <info>  [1760187440.3614] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:57:20 IQ138000 NetworkManager[403]: <info>  [1760187440.3616] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:57:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:57:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:57:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:57:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:57:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:57:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:57:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:57:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:57:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:57:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:57:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:57:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:57:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:57:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:57:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:57:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:57:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:57:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:57:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:57:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:57:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:57:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:57:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:57:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:57:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:57:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:57:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:57:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:57:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:57:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:57:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:57:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:57:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:57:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:57:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:43 IQ138000 NetworkManager[403]: <warn>  [1760187463.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:57:43 IQ138000 NetworkManager[403]: <info>  [1760187463.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:57:43 IQ138000 NetworkManager[403]: <warn>  [1760187463.0267] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:57:43 IQ138000 NetworkManager[403]: <info>  [1760187463.0293] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:57:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/285
Oct 11 12:57:43 IQ138000 NetworkManager[403]: <info>  [1760187463.0763] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:57:43 IQ138000 NetworkManager[403]: <info>  [1760187463.0765] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:48 IQ138000 NetworkManager[403]: <info>  [1760187468.9813] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 12:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:58:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:58:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:58:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:58:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:58:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:58:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:58:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:58:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:58:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:58:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:58:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:58:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:58:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:58:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:58:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:58:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:58:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:58:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:58:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:58:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:58:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:58:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:58:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:58:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:58:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:58:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:58:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:58:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:58:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:58:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:58:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:58:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:58:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:58:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:58:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:58:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:58:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:58:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 12:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 12:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:17 IQ138000 wb-watchdog[12146]: [INFO] Interval #402 started. Waiting up to 60 seconds for error...
Oct 11 12:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:58:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:58:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:58:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:58:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:58:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:58:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:58:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:58:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:58:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:58:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:58:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:58:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:58:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:58:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:58:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:58:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:58:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:58:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:58:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:58:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:58:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:58:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:58:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:58:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:58:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:58:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:58:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:58:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:58:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:58:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:58:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:58:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:58:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:58:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:58:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:58:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:58:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:58:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:58:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:58:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.8844] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.8859] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.8872] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.8920] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.8939] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.8940] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9039] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9063] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9080] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9083] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9084] Config: added 'scan_ssid' value '1'
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9085] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9086] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 12:58:43 IQ138000 NetworkManager[403]: <info>  [1760187523.9087] Config: added 'psk' value '<hidden>'
Oct 11 12:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/286
Oct 11 12:58:44 IQ138000 NetworkManager[403]: <info>  [1760187524.0167] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 12:58:44 IQ138000 NetworkManager[403]: <info>  [1760187524.0169] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 12:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:59:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:59:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:59:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:59:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:59:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:59:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:59:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:59:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:59:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:59:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:59:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:59:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:59:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:59:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:59:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:59:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:59:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:59:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:59:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:59:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:59:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:59:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:59:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:59:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:59:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:59:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:59:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:59:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:59:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:59:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:59:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:59:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:59:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:59:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:59:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:59:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:59:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:59:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:59:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:59:09 IQ138000 NetworkManager[403]: <warn>  [1760187549.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 12:59:09 IQ138000 NetworkManager[403]: <info>  [1760187549.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 12:59:09 IQ138000 NetworkManager[403]: <warn>  [1760187549.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 12:59:09 IQ138000 NetworkManager[403]: <info>  [1760187549.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 12:59:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/286
Oct 11 12:59:09 IQ138000 NetworkManager[403]: <info>  [1760187549.0791] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 12:59:09 IQ138000 NetworkManager[403]: <info>  [1760187549.0793] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 12:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 12:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:14 IQ138000 NetworkManager[403]: <info>  [1760187554.6574] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 12:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:17 IQ138000 wb-watchdog[12753]: [INFO] Interval #403 started. Waiting up to 60 seconds for error...
Oct 11 12:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:59:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:59:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 12:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 12:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:59:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:59:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 12:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 12:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L3, row count 7183, limit 7042
Oct 11 12:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 12:59:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 12:59:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 12:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:59:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 12:59:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 12:59:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 12:59:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 12:59:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 12:59:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 12:59:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 12:59:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 12:59:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 12:59:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 12:59:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 12:59:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 12:59:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 12:59:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 12:59:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 12:59:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 12:59:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 12:59:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 12:59:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 12:59:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 12:59:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 12:59:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 12:59:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:59:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 12:59:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 12:59:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 12:59:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:59:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 12:59:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 12:59:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 12:59:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 12:59:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 12:59:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 12:59:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 12:59:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 12:59:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 12:59:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 12:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 12:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 12:59:50 IQ138000 lsyncd[6566]: 12:59:50 Normal: Calling rsync with filter-list of new/modified files/dirs
Oct 11 12:59:50 IQ138000 lsyncd[6566]: /data-handler/20251011-111422000.txt
Oct 11 12:59:50 IQ138000 lsyncd[6566]: /data-handler/
Oct 11 12:59:50 IQ138000 lsyncd[6566]: /
Oct 11 12:59:50 IQ138000 lsyncd[6566]: /data-handler/20251011-125050000.txt
Oct 11 12:59:50 IQ138000 lsyncd[6566]: /data-handler/20251011-080426000.txt
Oct 11 12:59:50 IQ138000 lsyncd[13136]: kex_exchange_identification: Connection closed by remote host
Oct 11 12:59:50 IQ138000 lsyncd[13136]: Connection closed by 45.89.26.233 port 22
Oct 11 12:59:50 IQ138000 lsyncd[13135]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 12:59:50 IQ138000 lsyncd[13135]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 12:59:50 IQ138000 lsyncd[6566]: 12:59:50 Normal: Retrying (list): 255
Oct 11 12:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:59:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 12:59:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 12:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 12:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 12:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 12:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 12:59:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 12:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16932 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:00:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:00:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:00:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:00:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:00:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:00:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:00:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:00:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:00:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:00:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:00:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:00:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:00:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:00:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:00:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:00:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:00:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:00:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:00:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:00:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:00:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:00:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:00:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:00:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:00:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:00:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:00:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:00:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:00:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:00:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:00:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:00:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:00:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:00:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:00:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:00:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7369] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7376] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7384] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7482] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7517] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7519] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7696] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7714] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7755] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7759] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7762] Config: added 'scan_ssid' value '1'
Oct 11 13:00:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/287
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7763] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7764] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.7765] Config: added 'psk' value '<hidden>'
Oct 11 13:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.8565] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:00:09 IQ138000 NetworkManager[403]: <info>  [1760187609.8567] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:00:17 IQ138000 wb-watchdog[13455]: [INFO] Interval #404 started. Waiting up to 60 seconds for error...
Oct 11 13:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:00:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:35 IQ138000 NetworkManager[403]: <warn>  [1760187635.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:00:35 IQ138000 NetworkManager[403]: <info>  [1760187635.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:00:35 IQ138000 NetworkManager[403]: <warn>  [1760187635.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:00:35 IQ138000 NetworkManager[403]: <info>  [1760187635.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:00:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/287
Oct 11 13:00:35 IQ138000 NetworkManager[403]: <info>  [1760187635.0679] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:00:35 IQ138000 NetworkManager[403]: <info>  [1760187635.0681] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:00:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:00:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:00:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:00:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:00:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:00:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:00:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:00:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:00:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:00:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:00:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:00:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:00:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:00:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:00:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:00:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:00:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:00:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:00:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:00:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:00:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:00:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:00:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:00:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:00:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:00:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:00:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:00:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:00:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:00:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:00:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:00:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:00:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:00:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:00:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:00:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:00:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 4287 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:41 IQ138000 NetworkManager[403]: <info>  [1760187641.5130] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:00:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:00:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:00:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L1, row count 7183, limit 7042
Oct 11 13:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:00:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:00:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:01:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:01:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:01:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:01:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:01:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:01:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:01:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:01:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:01:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:01:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:01:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:01:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:01:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:01:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:01:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:01:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:01:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:01:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:01:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:01:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:01:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:01:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:01:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:01:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:01:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:01:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:01:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:01:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:01:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:01:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:01:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:01:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:01:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:01:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:01:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:01:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:17 IQ138000 wb-watchdog[14069]: [INFO] Interval #405 started. Waiting up to 60 seconds for error...
Oct 11 13:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4137] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4165] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4174] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4230] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4253] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4255] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4430] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4450] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4467] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4471] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4472] Config: added 'scan_ssid' value '1'
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4473] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4475] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.4475] Config: added 'psk' value '<hidden>'
Oct 11 13:01:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/288
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.5284] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:01:36 IQ138000 NetworkManager[403]: <info>  [1760187696.5292] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:01:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:01:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:01:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:01:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:01:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:01:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:01:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:01:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:01:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:01:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:01:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:01:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:01:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:01:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:01:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:01:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:01:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:01:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:01:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:01:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:01:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:01:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:01:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:01:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:01:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:01:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:01:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:01:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:01:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:01:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:01:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:01:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:01:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:01:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:01:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:01:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:01:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:01:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:01:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:01:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:02 IQ138000 NetworkManager[403]: <warn>  [1760187722.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:02:02 IQ138000 NetworkManager[403]: <info>  [1760187722.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:02:02 IQ138000 NetworkManager[403]: <warn>  [1760187722.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:02:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:02:02 IQ138000 NetworkManager[403]: <info>  [1760187722.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:02:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/288
Oct 11 13:02:02 IQ138000 NetworkManager[403]: <info>  [1760187722.0738] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:02:02 IQ138000 NetworkManager[403]: <info>  [1760187722.0740] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:02:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:08 IQ138000 NetworkManager[403]: <info>  [1760187728.1711] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:02:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:02:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:02:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:02:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:02:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:02:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:02:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:02:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:02:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:02:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:02:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:02:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:02:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:02:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:02:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:02:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:02:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:02:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:02:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:02:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:02:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:02:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:02:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:02:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:02:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:02:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:02:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:02:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:02:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:02:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:02:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:02:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:02:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:02:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:02:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:02:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:02:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:17 IQ138000 wb-watchdog[14771]: [INFO] Interval #406 started. Waiting up to 60 seconds for error...
Oct 11 13:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:02:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:02:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:02:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:02:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:02:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:02:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:02:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:02:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:02:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:02:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:02:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:02:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:02:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:02:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:02:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:02:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:02:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:02:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:02:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:02:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:02:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:02:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:02:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:02:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:02:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:02:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:02:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:02:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:02:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:02:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:02:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:02:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:02:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:02:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:02:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:02:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:02:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:02:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:02:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:02:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:03:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1485] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1489] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1495] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1586] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1606] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1608] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1729] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1762] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1792] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1802] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1803] Config: added 'scan_ssid' value '1'
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1804] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1806] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:03:03 IQ138000 NetworkManager[403]: <info>  [1760187783.1807] Config: added 'psk' value '<hidden>'
Oct 11 13:03:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/289
Oct 11 13:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:03:06 IQ138000 NetworkManager[403]: <info>  [1760187786.2567] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:03:06 IQ138000 NetworkManager[403]: <info>  [1760187786.2569] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:03:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:03:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:03:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:03:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:03:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:03:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:03:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:03:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:03:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:03:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:03:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:03:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:03:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:03:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:03:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:03:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:03:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:03:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:03:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:03:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:03:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:03:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:03:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:03:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:03:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:03:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:03:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:03:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:03:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:03:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:03:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:03:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:03:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:03:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:03:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:03:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:03:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:17 IQ138000 wb-watchdog[15370]: [INFO] Interval #407 started. Waiting up to 60 seconds for error...
Oct 11 13:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:28 IQ138000 NetworkManager[403]: <warn>  [1760187808.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:03:28 IQ138000 NetworkManager[403]: <info>  [1760187808.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:03:28 IQ138000 NetworkManager[403]: <warn>  [1760187808.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:03:28 IQ138000 NetworkManager[403]: <info>  [1760187808.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:03:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/289
Oct 11 13:03:28 IQ138000 NetworkManager[403]: <info>  [1760187808.0661] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:03:28 IQ138000 NetworkManager[403]: <info>  [1760187808.0663] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:33 IQ138000 NetworkManager[403]: <info>  [1760187813.8394] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:03:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:03:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:03:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:03:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:03:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:03:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:03:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:03:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:03:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:03:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:03:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:03:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:03:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:03:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:03:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:03:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:03:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:03:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:03:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:03:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:03:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:03:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:03:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:03:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:03:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:03:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:03:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:03:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:03:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:03:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:03:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:03:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:03:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:03:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:03:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:03:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:03:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:03:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:04:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:04:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:04:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:04:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:04:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:04:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:04:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:04:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:04:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:04:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:04:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:04:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:04:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:04:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:04:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:04:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:04:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:04:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:04:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:04:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:04:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:04:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:04:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:04:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:04:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:04:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:04:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:04:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:04:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:04:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:04:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:04:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:04:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:04:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:04:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:04:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:04:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:04:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:04:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:17 IQ138000 wb-watchdog[16082]: [INFO] Interval #408 started. Waiting up to 60 seconds for error...
Oct 11 13:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is disconnected
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 13:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 13:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1217] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1222] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1228] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1301] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1318] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1320] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1410] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1430] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1449] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1452] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1454] Config: added 'scan_ssid' value '1'
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1455] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1456] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.1457] Config: added 'psk' value '<hidden>'
Oct 11 13:04:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/290
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.2143] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:04:29 IQ138000 NetworkManager[403]: <info>  [1760187869.2145] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:04:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:04:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:04:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:04:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:04:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:04:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:04:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:04:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:04:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:04:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:04:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:04:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:04:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:04:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:04:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:04:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:04:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:04:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:04:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:04:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:04:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:04:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:04:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:04:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:04:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:04:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:04:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:04:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:04:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:04:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:04:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:04:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:04:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:04:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:04:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:04:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:04:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:04:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:54 IQ138000 NetworkManager[403]: <warn>  [1760187894.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:04:54 IQ138000 NetworkManager[403]: <info>  [1760187894.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:04:54 IQ138000 NetworkManager[403]: <warn>  [1760187894.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:04:54 IQ138000 NetworkManager[403]: <info>  [1760187894.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:04:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/290
Oct 11 13:04:54 IQ138000 NetworkManager[403]: <info>  [1760187894.0726] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:04:54 IQ138000 NetworkManager[403]: <info>  [1760187894.0728] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 NetworkManager[403]: <info>  [1760187899.8308] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:05:01 IQ138000 CRON[16492]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:05:01 IQ138000 CRON[16496]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 13:05:01 IQ138000 CRON[16492]: pam_unix(cron:session): session closed for user root
Oct 11 13:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:05:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:05:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:05:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:05:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:05:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:05:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:05:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:05:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:05:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:05:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:05:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:05:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:05:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:05:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:05:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:05:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:05:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:05:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:05:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:05:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:05:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:05:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:05:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:05:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:05:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:05:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:05:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:05:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:05:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:05:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:05:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:05:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:05:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:05:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:05:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:05:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:05:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:05:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:05:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:05:17 IQ138000 wb-watchdog[16705]: [INFO] Interval #409 started. Waiting up to 60 seconds for error...
Oct 11 13:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:05:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L2, row count 7183, limit 7042
Oct 11 13:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:05:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:05:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:05:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:05:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:05:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:05:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:05:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:05:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:05:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:05:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:05:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:05:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:05:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:05:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:05:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:05:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:05:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:05:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:05:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:05:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:05:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:05:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:05:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:05:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:05:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:05:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:05:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:05:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:05:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:05:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:05:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:05:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:05:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:05:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:05:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6679] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6684] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6719] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6780] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6814] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6828] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6939] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6970] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.6998] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7014] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7022] Config: added 'scan_ssid' value '1'
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7024] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7025] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7026] Config: added 'psk' value '<hidden>'
Oct 11 13:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/291
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7724] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:05:54 IQ138000 NetworkManager[403]: <info>  [1760187954.7726] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:05:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:05:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:06:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:06:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:06:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:06:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:06:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:06:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:06:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:06:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:06:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:06:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:06:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:06:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:06:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:06:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:06:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:06:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:06:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:06:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:06:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:06:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:06:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:06:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:06:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:06:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:06:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:06:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:06:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:06:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:06:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:06:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:06:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:06:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:06:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:06:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:06:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:06:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:06:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:18 IQ138000 wb-watchdog[17404]: [INFO] Interval #410 started. Waiting up to 60 seconds for error...
Oct 11 13:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:06:20 IQ138000 NetworkManager[403]: <warn>  [1760187980.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:06:20 IQ138000 NetworkManager[403]: <info>  [1760187980.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:06:20 IQ138000 NetworkManager[403]: <warn>  [1760187980.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:06:20 IQ138000 NetworkManager[403]: <info>  [1760187980.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:06:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/291
Oct 11 13:06:20 IQ138000 NetworkManager[403]: <info>  [1760187980.0683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:06:20 IQ138000 NetworkManager[403]: <info>  [1760187980.0685] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:06:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:06:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:26 IQ138000 NetworkManager[403]: <info>  [1760187986.3616] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:06:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:06:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:06:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:06:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:06:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:06:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:06:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:06:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:06:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:06:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:06:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:06:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:06:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:06:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:06:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:06:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:06:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:06:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:06:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:06:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:06:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:06:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:06:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:06:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:06:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:06:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:06:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:06:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:06:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:06:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:06:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:06:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:06:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:06:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:06:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:06:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:06:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:06:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 13:07:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:07:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:07:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:07:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:07:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:07:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:07:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:07:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:07:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:07:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:07:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:07:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:07:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:07:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:07:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:07:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:07:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:07:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:07:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:07:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:07:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:07:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:07:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:07:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:07:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:07:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:07:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:07:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:07:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:07:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:07:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:07:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:07:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:07:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:07:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:07:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:07:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:07:18 IQ138000 wb-watchdog[18032]: [INFO] Interval #411 started. Waiting up to 60 seconds for error...
Oct 11 13:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3403] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3408] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3415] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3472] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3490] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3492] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3577] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3611] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3638] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3642] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3644] Config: added 'scan_ssid' value '1'
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3645] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3646] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.3647] Config: added 'psk' value '<hidden>'
Oct 11 13:07:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/292
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.4432] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:07:21 IQ138000 NetworkManager[403]: <info>  [1760188041.4434] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:07:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:07:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:07:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:07:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:07:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:07:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:07:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:07:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:07:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:07:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:07:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:07:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:07:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:07:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:07:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:07:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:07:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:07:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:07:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:07:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:07:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:07:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:07:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:07:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:07:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:07:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:07:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:07:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:07:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:07:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:07:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:07:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:07:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:07:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:07:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:07:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:07:47 IQ138000 NetworkManager[403]: <warn>  [1760188067.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:07:47 IQ138000 NetworkManager[403]: <info>  [1760188067.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:07:47 IQ138000 NetworkManager[403]: <warn>  [1760188067.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:07:47 IQ138000 NetworkManager[403]: <info>  [1760188067.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:07:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:07:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/292
Oct 11 13:07:47 IQ138000 NetworkManager[403]: <info>  [1760188067.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:07:47 IQ138000 NetworkManager[403]: <info>  [1760188067.0721] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:07:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:53 IQ138000 NetworkManager[403]: <info>  [1760188073.1030] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:07:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:07:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:01 IQ138000 CRON[18506]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:08:01 IQ138000 CRON[18510]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 13:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:08:07 IQ138000 sSMTP[18568]: Unable to locate mail
Oct 11 13:08:07 IQ138000 sSMTP[18568]: Cannot open mail:25
Oct 11 13:08:07 IQ138000 cron[18568]: sendmail: Cannot open mail:25
Oct 11 13:08:07 IQ138000 CRON[18506]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 13:08:07 IQ138000 CRON[18506]: pam_unix(cron:session): session closed for user root
Oct 11 13:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:08:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:08:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:08:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:08:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:08:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:08:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:08:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:08:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:08:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:08:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:08:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:08:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:08:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:08:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:08:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:08:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:08:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:08:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:08:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:08:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:08:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:08:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:08:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:08:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:08:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:08:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:08:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:08:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:08:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:08:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:08:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:08:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:08:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:08:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:08:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:18 IQ138000 wb-watchdog[18729]: [INFO] Interval #412 started. Waiting up to 60 seconds for error...
Oct 11 13:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:08:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:08:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:08:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:08:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:08:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:08:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:08:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:08:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:08:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:08:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:08:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:08:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:08:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:08:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:08:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:08:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:08:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:08:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:08:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:08:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:08:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:08:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:08:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:08:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:08:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:08:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:08:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:08:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:08:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:08:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:08:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:08:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:08:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:08:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:08:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:08:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:08:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:08:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:08:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:08:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.1822] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.1827] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.1832] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.1941] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.1973] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.1975] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2153] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2229] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2269] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2273] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2274] Config: added 'scan_ssid' value '1'
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2276] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2278] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.2279] Config: added 'psk' value '<hidden>'
Oct 11 13:08:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/293
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.3033] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:08:48 IQ138000 NetworkManager[403]: <info>  [1760188128.3035] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:52 IQ138000 NetworkManager[403]: <info>  [1760188132.9042] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:08:52 IQ138000 NetworkManager[403]: <info>  [1760188132.9044] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17156 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L1, row count 7183, limit 7042
Oct 11 13:08:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L2, row count 7183, limit 7042
Oct 11 13:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:08:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:08:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:09:01 IQ138000 NetworkManager[403]: <info>  [1760188141.3644] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:09:01 IQ138000 NetworkManager[403]: <info>  [1760188141.3646] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:09:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:04 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L3, row count 7183, limit 7042
Oct 11 13:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:13 IQ138000 NetworkManager[403]: <warn>  [1760188153.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:09:13 IQ138000 NetworkManager[403]: <info>  [1760188153.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:09:13 IQ138000 NetworkManager[403]: <warn>  [1760188153.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:09:13 IQ138000 NetworkManager[403]: <info>  [1760188153.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:09:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:09:13 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:09:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/293
Oct 11 13:09:13 IQ138000 NetworkManager[403]: <info>  [1760188153.0851] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:09:13 IQ138000 NetworkManager[403]: <info>  [1760188153.0853] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:09:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:09:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:09:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:09:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:09:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:09:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:09:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:09:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:09:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:09:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:09:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:09:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:09:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:09:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:09:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:09:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:09:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:09:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:09:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:09:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:09:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:09:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:09:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:09:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:09:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:09:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:09:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:09:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:09:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:09:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:09:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:09:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:09:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:09:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:09:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:18 IQ138000 wb-watchdog[19356]: [INFO] Interval #413 started. Waiting up to 60 seconds for error...
Oct 11 13:09:18 IQ138000 NetworkManager[403]: <info>  [1760188158.9458] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:09:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:09:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:09:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:09:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:09:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:09:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:09:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:09:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:09:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:09:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:09:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:09:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:09:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:09:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:09:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:09:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:09:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:09:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:09:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:09:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:09:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:09:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:09:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:09:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:09:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:09:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:09:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:09:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:09:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:09:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:09:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:09:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:09:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:09:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:09:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:09:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:09:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:09:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:50 IQ138000 lsyncd[6566]: 13:09:50 Normal: Calling rsync with filter-list of new/modified files/dirs
Oct 11 13:09:50 IQ138000 lsyncd[6566]: /data-handler/20251011-111422000.txt
Oct 11 13:09:50 IQ138000 lsyncd[6566]: /data-handler/
Oct 11 13:09:50 IQ138000 lsyncd[6566]: /
Oct 11 13:09:50 IQ138000 lsyncd[6566]: /data-handler/20251011-125050000.txt
Oct 11 13:09:50 IQ138000 lsyncd[6566]: /data-handler/20251011-080426000.txt
Oct 11 13:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:56 IQ138000 lsyncd[6566]: 13:09:56 Normal: Finished (list): 0
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 13:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 13:10:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 13:10:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 13:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:10:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:10:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:10:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:10:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:10:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:10:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:10:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:10:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:10:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:10:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:10:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:10:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:10:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:10:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:10:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:10:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:10:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:10:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:10:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:10:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:10:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:10:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:10:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:10:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:10:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:10:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:10:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:10:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:10:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:10:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:10:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:10:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:10:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:10:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:10:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0209] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0215] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0223] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0296] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0319] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0321] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0535] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0600] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0669] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0673] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0675] Config: added 'scan_ssid' value '1'
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0676] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0677] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:10:14 IQ138000 NetworkManager[403]: <info>  [1760188214.0678] Config: added 'psk' value '<hidden>'
Oct 11 13:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/294
Oct 11 13:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:10:17 IQ138000 NetworkManager[403]: <info>  [1760188217.1759] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:10:17 IQ138000 NetworkManager[403]: <info>  [1760188217.1765] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:18 IQ138000 wb-watchdog[20060]: [INFO] Interval #414 started. Waiting up to 60 seconds for error...
Oct 11 13:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:10:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:10:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:10:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:10:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:10:39 IQ138000 NetworkManager[403]: <warn>  [1760188239.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:10:39 IQ138000 NetworkManager[403]: <info>  [1760188239.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:10:39 IQ138000 NetworkManager[403]: <warn>  [1760188239.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:10:39 IQ138000 NetworkManager[403]: <info>  [1760188239.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:10:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/294
Oct 11 13:10:39 IQ138000 NetworkManager[403]: <info>  [1760188239.0705] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:10:39 IQ138000 NetworkManager[403]: <info>  [1760188239.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:10:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:10:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:10:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:10:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:10:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:10:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:10:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:10:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:10:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:10:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:10:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:10:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:10:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:10:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:10:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:10:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:10:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:10:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:10:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:10:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:10:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:10:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:10:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:10:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:10:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:10:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:10:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:10:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:10:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:10:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:10:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:10:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:10:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:10:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:10:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:10:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:44 IQ138000 NetworkManager[403]: <info>  [1760188244.8278] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8768 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:11:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:03 IQ138000 npm[3801]: [2025-10-11 13:11:03] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":36.11,"last_seen":1760188263519,"linkquality":98,"power_outage_count":48745,"temperature":26.55,"voltage":3025}'
Oct 11 13:11:03 IQ138000 npm[3801]: [2025-10-11 13:11:03] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.61,"last_seen":1760188263530,"linkquality":94,"power_outage_count":48745,"temperature":26.55,"voltage":3025}'
Oct 11 13:11:03 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760188443597,"cmd_timestamp_ms":1760188263597,"source":"regulation"}
Oct 11 13:11:03 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760188443597,"cmd_timestamp_ms":1760188263597,"source":"regulation"}
Oct 11 13:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:04 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 13:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:09 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 13:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:11:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:11:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:11:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:11:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:11:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:11:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:11:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:11:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:11:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:11:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:11:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:11:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:11:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:11:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:11:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:11:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:11:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:11:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:11:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:11:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:11:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:11:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:11:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:11:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:11:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:11:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:11:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:11:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:11:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:11:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:11:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:11:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:11:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:11:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:11:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:11:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:11:18 IQ138000 wb-watchdog[20662]: [INFO] Interval #415 started. Waiting up to 60 seconds for error...
Oct 11 13:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:11:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17170 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9395] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9414] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9421] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9490] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9519] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9521] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9653] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9673] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9692] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9695] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9696] Config: added 'scan_ssid' value '1'
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9697] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9700] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:11:39 IQ138000 NetworkManager[403]: <info>  [1760188299.9701] Config: added 'psk' value '<hidden>'
Oct 11 13:11:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/295
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:40 IQ138000 NetworkManager[403]: <info>  [1760188300.0586] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:11:40 IQ138000 NetworkManager[403]: <info>  [1760188300.0588] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:11:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:11:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:11:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:11:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:11:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:11:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:11:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:11:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:11:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:11:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:11:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:11:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:11:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:11:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:11:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:11:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:11:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:11:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:11:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:11:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:11:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:11:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:11:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:11:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:11:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:11:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:11:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:11:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:11:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:11:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:11:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:11:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:11:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:11:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:11:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:11:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:11:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:11:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:11:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:05 IQ138000 NetworkManager[403]: <warn>  [1760188325.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:12:05 IQ138000 NetworkManager[403]: <info>  [1760188325.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:12:05 IQ138000 NetworkManager[403]: <warn>  [1760188325.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:12:05 IQ138000 NetworkManager[403]: <info>  [1760188325.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:12:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/295
Oct 11 13:12:05 IQ138000 NetworkManager[403]: <info>  [1760188325.0666] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:12:05 IQ138000 NetworkManager[403]: <info>  [1760188325.0669] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:10 IQ138000 NetworkManager[403]: <info>  [1760188330.7015] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:12:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:12:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:12:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:12:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:12:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:12:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:12:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:12:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:12:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:12:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:12:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:12:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:12:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:12:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:12:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:12:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:12:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:12:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:12:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:12:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:12:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:12:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:12:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:12:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:12:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:12:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:12:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:12:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:12:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:12:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:12:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:12:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:12:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:12:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:12:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:12:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:12:18 IQ138000 wb-watchdog[21376]: [INFO] Interval #416 started. Waiting up to 60 seconds for error...
Oct 11 13:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:12:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:12:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:12:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:12:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:12:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:12:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:12:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:12:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:12:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:12:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:12:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:12:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:12:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:12:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:12:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:12:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:12:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:12:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:12:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:12:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:12:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:12:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:12:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:12:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:12:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:12:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:12:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:12:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:12:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:12:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:12:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:12:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:12:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:12:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:12:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:12:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:12:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:12:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:12:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:12:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:12:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:12:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:13:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6391] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6395] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6405] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6490] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6511] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6512] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6617] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6641] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6666] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6670] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6671] Config: added 'scan_ssid' value '1'
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6673] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6675] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.6676] Config: added 'psk' value '<hidden>'
Oct 11 13:13:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/296
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.7377] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:13:05 IQ138000 NetworkManager[403]: <info>  [1760188385.7379] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:13:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:13:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:13:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:13:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:13:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:13:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:13:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:13:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:13:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:13:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:13:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:13:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:13:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:13:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:13:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:13:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:13:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:13:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:13:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:13:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:13:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:13:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:13:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:13:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:13:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:13:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:13:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:13:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:13:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:13:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:13:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:13:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:13:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:13:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:13:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:13:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:18 IQ138000 wb-watchdog[21979]: [INFO] Interval #417 started. Waiting up to 60 seconds for error...
Oct 11 13:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:13:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:13:31 IQ138000 NetworkManager[403]: <warn>  [1760188411.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:13:31 IQ138000 NetworkManager[403]: <info>  [1760188411.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:13:31 IQ138000 NetworkManager[403]: <warn>  [1760188411.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:13:31 IQ138000 NetworkManager[403]: <info>  [1760188411.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:13:31 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:13:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/296
Oct 11 13:13:31 IQ138000 NetworkManager[403]: <info>  [1760188411.0664] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:13:31 IQ138000 NetworkManager[403]: <info>  [1760188411.0667] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:31 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:13:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L1, row count 7183, limit 7042
Oct 11 13:13:37 IQ138000 NetworkManager[403]: <info>  [1760188417.3795] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:13:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:13:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:13:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:13:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:13:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:13:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:13:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:13:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:13:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:13:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:13:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:13:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:13:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:13:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:13:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:13:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:13:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:13:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:13:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:13:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:13:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:13:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:13:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:13:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:13:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:13:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:13:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:13:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:13:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:13:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:13:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:13:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:13:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:13:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:13:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:13:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:13:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:13:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:13:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:13:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:13:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:13:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:13:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:13:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:14:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:14:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:14:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:14:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:14:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:14:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:14:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:14:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:14:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:14:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:14:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:14:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:14:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:14:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:14:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:14:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:14:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:14:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:14:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:14:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:14:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:14:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:14:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:14:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:14:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:14:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:14:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:14:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:14:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:14:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:14:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:14:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:14:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:14:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:14:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:14:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:14:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:14:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:14:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:14:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:18 IQ138000 wb-watchdog[22689]: [INFO] Interval #418 started. Waiting up to 60 seconds for error...
Oct 11 13:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:14:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:14:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3430] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3435] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3442] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3502] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3544] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3546] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3653] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3708] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3728] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3743] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3744] Config: added 'scan_ssid' value '1'
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3745] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3747] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:14:32 IQ138000 NetworkManager[403]: <info>  [1760188472.3747] Config: added 'psk' value '<hidden>'
Oct 11 13:14:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/297
Oct 11 13:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:36 IQ138000 NetworkManager[403]: <info>  [1760188476.4620] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:14:36 IQ138000 NetworkManager[403]: <info>  [1760188476.4625] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:14:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:14:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:14:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:14:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:14:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:14:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:14:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:14:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:14:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:14:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:14:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:14:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:14:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:14:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:14:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:14:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:14:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:14:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:14:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:14:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:14:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:14:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:14:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:14:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:14:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:14:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:14:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:14:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:14:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:14:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:14:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:14:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:14:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:14:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:14:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:14:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:14:51 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 13:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:14:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:14:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:14:58 IQ138000 NetworkManager[403]: <warn>  [1760188498.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:14:58 IQ138000 NetworkManager[403]: <info>  [1760188498.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:14:58 IQ138000 NetworkManager[403]: <warn>  [1760188498.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:14:58 IQ138000 NetworkManager[403]: <info>  [1760188498.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:14:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/297
Oct 11 13:14:58 IQ138000 NetworkManager[403]: <info>  [1760188498.0778] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:14:58 IQ138000 NetworkManager[403]: <info>  [1760188498.0780] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:01 IQ138000 CRON[23093]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:15:01 IQ138000 CRON[23097]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 13:15:01 IQ138000 CRON[23093]: pam_unix(cron:session): session closed for user root
Oct 11 13:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:04 IQ138000 NetworkManager[403]: <info>  [1760188504.0831] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:15:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:15:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:15:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:15:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:15:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:15:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:15:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:15:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:15:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:15:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:15:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:15:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:15:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:15:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:15:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:15:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:15:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:15:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:15:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:15:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:15:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:15:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:15:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:15:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:15:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:15:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:15:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:15:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:15:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:15:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:15:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:15:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:15:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:15:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:15:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:15:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:15:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:15:18 IQ138000 wb-watchdog[23319]: [INFO] Interval #419 started. Waiting up to 60 seconds for error...
Oct 11 13:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:15:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:15:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:15:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:15:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:15:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:15:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:15:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:15:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:15:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:15:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:15:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:15:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:15:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:15:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:15:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:15:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:15:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:15:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:15:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:15:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:15:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:15:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:15:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:15:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:15:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:15:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:15:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:15:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:15:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:15:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:15:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:15:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:15:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:15:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:15:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:15:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:15:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:15:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:15:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:15:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:15:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:15:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:15:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1228] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1232] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1238] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1296] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1315] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1317] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1407] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1427] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1445] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1449] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1450] Config: added 'scan_ssid' value '1'
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1451] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1452] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.1453] Config: added 'psk' value '<hidden>'
Oct 11 13:15:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/298
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.2256] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:15:59 IQ138000 NetworkManager[403]: <info>  [1760188559.2259] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16916 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:16:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:16:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:16:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:16:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:16:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:16:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:16:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:16:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:16:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:16:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:16:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:16:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:16:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:16:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:16:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:16:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:16:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:16:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:16:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:16:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:16:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:16:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:16:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:16:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:16:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:16:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:16:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:16:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:16:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:16:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:16:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:16:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:16:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:16:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:16:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:16:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:18 IQ138000 wb-watchdog[24005]: [INFO] Interval #420 started. Waiting up to 60 seconds for error...
Oct 11 13:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:24 IQ138000 NetworkManager[403]: <warn>  [1760188584.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:16:24 IQ138000 NetworkManager[403]: <info>  [1760188584.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:16:24 IQ138000 NetworkManager[403]: <warn>  [1760188584.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:16:24 IQ138000 NetworkManager[403]: <info>  [1760188584.0271] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:16:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/298
Oct 11 13:16:24 IQ138000 NetworkManager[403]: <info>  [1760188584.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:16:24 IQ138000 NetworkManager[403]: <info>  [1760188584.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:29 IQ138000 NetworkManager[403]: <info>  [1760188589.8480] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:16:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:16:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:16:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:16:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:16:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:16:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:16:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:16:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:16:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:16:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:16:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:16:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:16:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:16:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:16:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:16:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:16:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:16:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:16:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:16:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:16:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:16:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:16:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:16:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:16:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:16:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:16:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:16:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:16:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:16:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:16:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:16:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:16:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:16:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:16:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:16:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:16:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:16:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:16:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:16:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:16:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:01 IQ138000 CRON[24415]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:17:01 IQ138000 CRON[24419]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 13:17:01 IQ138000 CRON[24415]: pam_unix(cron:session): session closed for user root
Oct 11 13:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:17:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:17:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:17:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:17:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:17:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:17:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:17:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:17:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:17:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:17:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:17:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:17:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:17:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:17:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:17:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:17:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:17:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:17:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:17:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:17:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:17:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:17:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:17:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:17:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:17:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:17:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:17:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:17:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:17:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:17:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:17:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:17:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:17:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:17:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:17:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:17:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:18 IQ138000 wb-watchdog[24641]: [INFO] Interval #421 started. Waiting up to 60 seconds for error...
Oct 11 13:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0114] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0119] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0125] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0197] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0219] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0221] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0354] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0393] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0473] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0477] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0478] Config: added 'scan_ssid' value '1'
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0481] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0482] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.0483] Config: added 'psk' value '<hidden>'
Oct 11 13:17:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/299
Oct 11 13:17:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:17:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.1153] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:17:25 IQ138000 NetworkManager[403]: <info>  [1760188645.1155] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:17:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:17:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:17:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:17:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:17:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:17:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:17:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:17:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:17:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:17:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:17:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:17:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:17:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:17:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:17:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:17:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:17:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:17:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:17:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:17:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:17:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:17:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:17:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:17:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:17:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:17:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:17:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:17:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:17:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:17:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:17:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:17:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:17:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:17:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:17:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:17:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:17:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:17:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:17:50 IQ138000 NetworkManager[403]: <warn>  [1760188670.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:17:50 IQ138000 NetworkManager[403]: <info>  [1760188670.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:17:50 IQ138000 NetworkManager[403]: <warn>  [1760188670.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:17:50 IQ138000 NetworkManager[403]: <info>  [1760188670.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:17:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/299
Oct 11 13:17:50 IQ138000 NetworkManager[403]: <info>  [1760188670.0726] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:17:50 IQ138000 NetworkManager[403]: <info>  [1760188670.0728] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:17:55 IQ138000 NetworkManager[403]: <info>  [1760188675.7601] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:18:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:15 IQ138000 npm[3801]: [2025-10-11 13:18:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.87,"last_seen":1760188695383,"linkquality":87,"power_outage_count":48745,"temperature":26.82,"voltage":3025}'
Oct 11 13:18:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:18:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:18:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:18:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:18:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:18:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:18:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:18:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:18:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:18:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:18:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:18:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:18:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:18:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:18:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:18:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:18:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:18:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:18:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:18:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:18:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:18:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:18:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:18:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:18:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:18:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:18:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:18:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:18:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:18:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:18:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:18:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:18:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:18:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:18:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:18:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:18:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:18:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:18:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:18:18 IQ138000 wb-watchdog[25336]: [INFO] Interval #422 started. Waiting up to 60 seconds for error...
Oct 11 13:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:18:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:18:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:18:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:18:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:18:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:18:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:18:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:18:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:18:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:18:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:18:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:18:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:18:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:18:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:18:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:18:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:18:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:18:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:18:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:18:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:18:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:18:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:18:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:18:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:18:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:18:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:18:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:18:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:18:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:18:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:18:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:18:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:18:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:18:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:18:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:18:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:18:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:18:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:18:50 IQ138000 NetworkManager[403]: <info>  [1760188730.9817] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:18:50 IQ138000 NetworkManager[403]: <info>  [1760188730.9847] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:18:50 IQ138000 NetworkManager[403]: <info>  [1760188730.9857] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:18:50 IQ138000 NetworkManager[403]: <info>  [1760188730.9933] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:18:50 IQ138000 NetworkManager[403]: <info>  [1760188730.9953] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:18:50 IQ138000 NetworkManager[403]: <info>  [1760188730.9955] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0079] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0120] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0139] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0143] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0144] Config: added 'scan_ssid' value '1'
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0144] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0146] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0146] Config: added 'psk' value '<hidden>'
Oct 11 13:18:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/300
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0926] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:18:51 IQ138000 NetworkManager[403]: <info>  [1760188731.0928] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:18:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:18:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:19:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:19:16 IQ138000 NetworkManager[403]: <warn>  [1760188756.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:19:16 IQ138000 NetworkManager[403]: <info>  [1760188756.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:19:16 IQ138000 NetworkManager[403]: <warn>  [1760188756.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:19:16 IQ138000 NetworkManager[403]: <info>  [1760188756.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:19:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/300
Oct 11 13:19:16 IQ138000 NetworkManager[403]: <info>  [1760188756.0719] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:19:16 IQ138000 NetworkManager[403]: <info>  [1760188756.0721] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:19:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:19:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:19:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:19:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:19:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:19:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:19:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:19:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:19:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:19:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:19:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:19:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:19:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:19:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:19:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:19:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:19:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:19:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:19:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:19:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:19:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:19:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:19:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:19:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:19:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:19:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:19:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:19:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:19:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:19:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:19:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:19:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:19:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:19:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:19:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:19:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:19:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:19:18 IQ138000 wb-watchdog[25950]: [INFO] Interval #423 started. Waiting up to 60 seconds for error...
Oct 11 13:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:21 IQ138000 NetworkManager[403]: <info>  [1760188761.7307] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:19:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:19:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:19:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:19:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:19:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:19:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:19:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:19:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:19:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:19:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:19:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:19:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:19:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:19:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:19:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:19:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:19:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:19:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:19:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:19:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:19:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:19:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:19:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:19:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:19:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:19:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:19:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:19:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:19:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:19:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:19:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:19:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:19:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:19:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:19:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:19:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:19:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:19:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:19:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:19:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:19:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:20:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7512] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7517] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7522] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7582] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7599] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7601] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7678] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7698] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7717] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7720] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7721] Config: added 'scan_ssid' value '1'
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7722] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7723] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.7725] Config: added 'psk' value '<hidden>'
Oct 11 13:20:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/301
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.8502] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:20:16 IQ138000 NetworkManager[403]: <info>  [1760188816.8504] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 13:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:20:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:20:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:20:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:20:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:20:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:20:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:20:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:20:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:20:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:20:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:20:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:20:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:20:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:20:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:20:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:20:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:20:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:20:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:20:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:20:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:20:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:20:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:20:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:20:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:20:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:20:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:20:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:20:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:20:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:20:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:20:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:20:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:20:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:20:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:20:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:18 IQ138000 wb-watchdog[26662]: [INFO] Interval #424 started. Waiting up to 60 seconds for error...
Oct 11 13:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:20:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:28 IQ138000 npm[3801]: [2025-10-11 13:20:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":49.61,"last_seen":1760188828605,"linkquality":72,"power_outage_count":25795,"pressure":992.2,"temperature":22.8,"voltage":2995}'
Oct 11 13:20:28 IQ138000 npm[3801]: [2025-10-11 13:20:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.58,"last_seen":1760188828622,"linkquality":72,"power_outage_count":25795,"pressure":992.2,"temperature":22.8,"voltage":2995}'
Oct 11 13:20:28 IQ138000 npm[3801]: [2025-10-11 13:20:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.58,"last_seen":1760188828622,"linkquality":72,"power_outage_count":25795,"pressure":991.7,"temperature":22.8,"voltage":2995}'
Oct 11 13:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:42 IQ138000 NetworkManager[403]: <warn>  [1760188842.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:20:42 IQ138000 NetworkManager[403]: <info>  [1760188842.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:20:42 IQ138000 NetworkManager[403]: <warn>  [1760188842.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:20:42 IQ138000 NetworkManager[403]: <info>  [1760188842.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:20:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/301
Oct 11 13:20:42 IQ138000 NetworkManager[403]: <info>  [1760188842.0740] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:20:42 IQ138000 NetworkManager[403]: <info>  [1760188842.0742] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:20:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:20:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:20:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:20:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:20:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:20:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:20:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:20:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:20:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:20:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:20:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:20:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:20:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:20:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:20:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:20:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:20:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:20:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:20:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:20:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:20:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:20:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:20:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:20:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:20:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:20:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:20:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:20:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:20:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:20:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:20:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:20:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:20:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:20:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:20:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:20:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:20:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:48 IQ138000 NetworkManager[403]: <info>  [1760188848.5064] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:20:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:20:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5506 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:21:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:07 IQ138000 npm[3801]: [2025-10-11 13:21:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.39,"last_seen":1760188867600,"linkquality":21,"power_outage_count":35250,"temperature":24.55,"voltage":3075}'
Oct 11 13:21:07 IQ138000 npm[3801]: [2025-10-11 13:21:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.04,"last_seen":1760188867611,"linkquality":25,"power_outage_count":35250,"temperature":24.55,"voltage":3075}'
Oct 11 13:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:21:11 IQ138000 npm[3801]: [2025-10-11 13:21:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.87,"last_seen":1760188871756,"linkquality":105,"power_outage_count":48745,"temperature":27.06,"voltage":3025}'
Oct 11 13:21:11 IQ138000 npm[3801]: [2025-10-11 13:21:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.19,"last_seen":1760188871766,"linkquality":105,"power_outage_count":48745,"temperature":27.06,"voltage":3025}'
Oct 11 13:21:11 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760189051810,"cmd_timestamp_ms":1760188871810,"source":"regulation"}
Oct 11 13:21:11 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760189051810,"cmd_timestamp_ms":1760188871810,"source":"regulation"}
Oct 11 13:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:12 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 13:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5101>: Serial protocol error: request timed out
Oct 11 13:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:17 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 13:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:18 IQ138000 wb-watchdog[27257]: [INFO] Interval #425 started. Waiting up to 60 seconds for error...
Oct 11 13:21:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:21:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:21:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:21:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:21:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:21:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:21:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:21:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:21:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:21:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:21:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:21:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:21:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:21:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:21:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:21:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:21:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:21:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:21:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:21:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:21:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:21:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:21:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:21:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:21:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:21:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:21:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:21:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:21:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:21:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:21:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:21:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:21:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:21:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:21:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:21:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:21:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:21:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:21:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4599] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4605] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4612] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4669] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4686] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4689] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4782] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4804] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4822] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4826] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4827] Config: added 'scan_ssid' value '1'
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4828] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4829] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.4830] Config: added 'psk' value '<hidden>'
Oct 11 13:21:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/302
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.5534] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:21:43 IQ138000 NetworkManager[403]: <info>  [1760188903.5536] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:21:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:21:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:21:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:21:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:21:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:21:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:21:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:21:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:21:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:21:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:21:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:21:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:21:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:21:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:21:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:21:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:21:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:21:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:21:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:21:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:21:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:21:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:21:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:21:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:21:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:21:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:21:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:21:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:21:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:21:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:21:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:21:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:21:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:21:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:21:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:21:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:21:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:21:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:21:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:21:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:22:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:22:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:09 IQ138000 NetworkManager[403]: <warn>  [1760188929.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:22:09 IQ138000 NetworkManager[403]: <info>  [1760188929.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:22:09 IQ138000 NetworkManager[403]: <warn>  [1760188929.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:22:09 IQ138000 NetworkManager[403]: <info>  [1760188929.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:22:09 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:22:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/302
Oct 11 13:22:09 IQ138000 NetworkManager[403]: <info>  [1760188929.0728] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:22:09 IQ138000 NetworkManager[403]: <info>  [1760188929.0731] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:09 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:22:15 IQ138000 NetworkManager[403]: <info>  [1760188935.1922] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:22:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:22:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:22:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:22:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:22:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:22:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:22:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:22:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:22:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:22:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:22:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:22:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:22:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:22:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:22:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:22:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:22:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:22:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:22:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:22:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:22:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:22:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:22:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:22:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:22:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:22:18 IQ138000 wb-watchdog[27977]: [INFO] Interval #426 started. Waiting up to 60 seconds for error...
Oct 11 13:22:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:22:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:22:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:22:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:22:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:22:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:22:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:22:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:22:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:22:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:22:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:22:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:22:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:22:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:22:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:22:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:22:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:22:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:22:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:22:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:22:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:22:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:22:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:22:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:22:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:22:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:22:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:22:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:22:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:22:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:22:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:22:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:22:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:22:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:22:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:22:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:22:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:22:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:22:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:22:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:22:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:22:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:22:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:22:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:22:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:22:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:22:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:22:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 13:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:22:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L3, row count 7183, limit 7042
Oct 11 13:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:23:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3030] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3036] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3044] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3126] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3152] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3157] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3349] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3395] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3435] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3439] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3440] Config: added 'scan_ssid' value '1'
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3441] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3442] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:23:10 IQ138000 NetworkManager[403]: <info>  [1760188990.3443] Config: added 'psk' value '<hidden>'
Oct 11 13:23:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/303
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:23:14 IQ138000 NetworkManager[403]: <info>  [1760188994.4361] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:23:14 IQ138000 NetworkManager[403]: <info>  [1760188994.4363] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:18 IQ138000 wb-watchdog[28563]: [INFO] Interval #427 started. Waiting up to 60 seconds for error...
Oct 11 13:23:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:23:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:23:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:23:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:23:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:23:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:23:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:23:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:23:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:23:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:23:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:23:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:23:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:23:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:23:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:23:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:23:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:23:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:23:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:23:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:23:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:23:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:23:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:23:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:23:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:23:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:23:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:23:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:23:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:23:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:23:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:23:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:23:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:23:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:23:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:23:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:23:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:23:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:36 IQ138000 NetworkManager[403]: <warn>  [1760189016.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:23:36 IQ138000 NetworkManager[403]: <info>  [1760189016.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:23:36 IQ138000 NetworkManager[403]: <warn>  [1760189016.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:23:36 IQ138000 NetworkManager[403]: <info>  [1760189016.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:23:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/303
Oct 11 13:23:36 IQ138000 NetworkManager[403]: <info>  [1760189016.0682] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:23:36 IQ138000 NetworkManager[403]: <info>  [1760189016.0684] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:42 IQ138000 NetworkManager[403]: <info>  [1760189022.0832] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:23:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:23:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:23:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:23:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:23:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:23:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:23:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:23:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:23:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:23:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:23:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:23:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:23:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:23:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:23:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:23:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:23:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:23:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:23:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:23:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:23:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:23:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:23:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:23:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:23:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:23:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:23:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:23:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:23:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:23:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:23:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:23:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:23:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:23:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:23:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:23:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:23:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:23:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:23:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:23:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:24:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:19 IQ138000 wb-watchdog[29280]: [INFO] Interval #428 started. Waiting up to 60 seconds for error...
Oct 11 13:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:24:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:24:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:24:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:24:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:24:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:24:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:24:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:24:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:24:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:24:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:24:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:24:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:24:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:24:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:24:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:24:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:24:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:24:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:24:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:24:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:24:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:24:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:24:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:24:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:24:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:24:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:24:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:24:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:24:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:24:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:24:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:24:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:24:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:24:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:24:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.1923] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.1928] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.1949] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2018] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2049] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2052] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2176] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2228] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2309] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2323] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2327] Config: added 'scan_ssid' value '1'
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2333] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2335] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.2336] Config: added 'psk' value '<hidden>'
Oct 11 13:24:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/304
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.3090] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:24:37 IQ138000 NetworkManager[403]: <info>  [1760189077.3092] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:24:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:24:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:24:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:24:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:24:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:24:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:24:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:24:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:24:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:24:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:24:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:24:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:24:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:24:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:24:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:24:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:24:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:24:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:24:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:24:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:24:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:24:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:24:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:24:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:24:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:24:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:24:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:24:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:24:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:24:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:24:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:24:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:24:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:24:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:24:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:24:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:24:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:24:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:24:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:24:56 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 13:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 13:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:02 IQ138000 NetworkManager[403]: <warn>  [1760189102.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:25:02 IQ138000 NetworkManager[403]: <info>  [1760189102.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:25:02 IQ138000 NetworkManager[403]: <warn>  [1760189102.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:25:02 IQ138000 NetworkManager[403]: <info>  [1760189102.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:25:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/304
Oct 11 13:25:02 IQ138000 CRON[29678]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:25:02 IQ138000 NetworkManager[403]: <info>  [1760189102.0735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:25:02 IQ138000 NetworkManager[403]: <info>  [1760189102.0738] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:25:02 IQ138000 CRON[29685]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 13:25:02 IQ138000 CRON[29678]: pam_unix(cron:session): session closed for user root
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:25:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:25:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:07 IQ138000 NetworkManager[403]: <info>  [1760189107.9871] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:19 IQ138000 wb-watchdog[29920]: [INFO] Interval #429 started. Waiting up to 60 seconds for error...
Oct 11 13:25:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:25:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:25:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:25:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:25:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:25:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:25:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:25:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:25:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:25:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:25:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:25:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:25:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:25:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:25:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:25:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:25:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:25:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:25:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:25:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:25:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:25:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:25:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:25:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:25:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:25:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:25:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:25:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:25:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:25:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:25:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:25:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:25:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:25:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:25:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:25:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:25:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:25:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:25:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:25:42 IQ138000 npm[3801]: [2025-10-11 13:25:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.58,"last_seen":1760189142118,"linkquality":69,"power_outage_count":25795,"pressure":991.7,"temperature":22.84,"voltage":2995}'
Oct 11 13:25:42 IQ138000 npm[3801]: [2025-10-11 13:25:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50,"last_seen":1760189142133,"linkquality":65,"power_outage_count":25795,"pressure":991.7,"temperature":22.84,"voltage":2995}'
Oct 11 13:25:42 IQ138000 npm[3801]: [2025-10-11 13:25:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50,"last_seen":1760189142164,"linkquality":65,"power_outage_count":25795,"pressure":992,"temperature":22.84,"voltage":2995}'
Oct 11 13:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:25:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:25:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:25:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:25:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:25:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:25:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:25:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:25:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:25:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:25:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:25:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:25:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:25:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:25:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:25:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:25:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:25:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:25:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:25:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:25:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:25:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:25:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:25:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:25:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:25:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:25:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:25:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:25:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:25:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:25:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:25:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:25:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:25:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:25:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:25:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:25:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:25:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:25:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9447] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9452] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9457] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9503] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9518] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9519] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9631] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9668] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9687] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9691] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9692] Config: added 'scan_ssid' value '1'
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9693] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9694] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:26:02 IQ138000 NetworkManager[403]: <info>  [1760189162.9695] Config: added 'psk' value '<hidden>'
Oct 11 13:26:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/305
Oct 11 13:26:03 IQ138000 NetworkManager[403]: <info>  [1760189163.0436] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:26:03 IQ138000 NetworkManager[403]: <info>  [1760189163.0448] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:26:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:19 IQ138000 wb-watchdog[30603]: [INFO] Interval #430 started. Waiting up to 60 seconds for error...
Oct 11 13:26:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:26:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:26:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:26:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:26:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:26:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:26:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:26:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:26:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:26:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:26:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:26:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:26:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:26:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:26:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:26:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:26:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:26:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:26:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:26:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:26:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:26:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:26:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:26:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:26:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:26:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:26:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:26:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:26:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:26:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:26:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:26:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:26:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:26:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:26:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:26:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:26:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:26:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:28 IQ138000 NetworkManager[403]: <warn>  [1760189188.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:26:28 IQ138000 NetworkManager[403]: <info>  [1760189188.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:26:28 IQ138000 NetworkManager[403]: <warn>  [1760189188.0265] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:26:28 IQ138000 NetworkManager[403]: <info>  [1760189188.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:26:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/305
Oct 11 13:26:28 IQ138000 NetworkManager[403]: <info>  [1760189188.0736] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:26:28 IQ138000 NetworkManager[403]: <info>  [1760189188.0737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:26:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:26:33 IQ138000 NetworkManager[403]: <info>  [1760189193.7079] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:26:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:26:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:26:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:26:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:26:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:26:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:26:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:26:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:26:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:26:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:26:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:26:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:26:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:26:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:26:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:26:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:26:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:26:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:26:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:26:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:26:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:26:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:26:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:26:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:26:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:26:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:26:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:26:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:26:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:26:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:26:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:26:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:26:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:26:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:26:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:26:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:26:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:26:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:27:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:27:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:19 IQ138000 wb-watchdog[31231]: [INFO] Interval #431 started. Waiting up to 60 seconds for error...
Oct 11 13:27:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:27:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:27:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:27:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:27:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:27:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:27:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:27:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:27:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:27:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:27:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:27:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:27:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:27:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:27:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:27:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:27:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:27:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:27:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:27:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:27:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:27:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:27:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:27:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:27:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:27:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:27:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:27:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:27:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:27:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:27:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:27:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:27:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:27:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:27:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:27:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:27:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0770] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0775] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0781] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0840] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0860] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0862] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0971] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.0992] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1013] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1016] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1017] Config: added 'scan_ssid' value '1'
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1018] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1019] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1020] Config: added 'psk' value '<hidden>'
Oct 11 13:27:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/306
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1842] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:27:29 IQ138000 NetworkManager[403]: <info>  [1760189249.1844] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:27:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:27:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:27:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:27:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:27:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:27:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:27:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:27:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:27:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:27:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:27:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:27:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:27:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:27:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:27:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:27:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:27:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:27:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:27:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:27:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:27:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:27:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:27:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:27:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:27:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:27:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:27:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:27:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:27:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:27:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:27:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:27:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:27:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:27:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:27:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:27:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:27:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:27:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:27:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:27:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:27:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:27:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:27:54 IQ138000 NetworkManager[403]: <warn>  [1760189274.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:27:54 IQ138000 NetworkManager[403]: <info>  [1760189274.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:27:54 IQ138000 NetworkManager[403]: <warn>  [1760189274.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:27:54 IQ138000 NetworkManager[403]: <info>  [1760189274.0273] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:27:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/306
Oct 11 13:27:54 IQ138000 NetworkManager[403]: <info>  [1760189274.0733] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:27:54 IQ138000 NetworkManager[403]: <info>  [1760189274.0735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:27:59 IQ138000 NetworkManager[403]: <info>  [1760189279.7967] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:28:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:28:19 IQ138000 wb-watchdog[31917]: [INFO] Interval #432 started. Waiting up to 60 seconds for error...
Oct 11 13:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:28:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:28:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:28:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:28:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:28:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:28:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:28:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:28:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:28:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:28:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:28:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:28:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:28:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:28:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:28:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:28:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:28:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:28:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:28:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:28:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:28:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:28:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:28:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:28:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:28:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:28:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:28:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:28:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:28:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:28:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:28:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:28:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:28:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:28:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:28:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:28:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:28:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:28:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:28:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:28:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:28:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:28:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:28:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:28:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:28:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:28:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:28:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:28:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:28:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:28:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:28:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:28:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:28:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:28:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:28:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:28:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:28:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:28:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:28:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:28:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:28:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:28:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:28:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:28:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:28:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:28:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:28:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:28:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:28:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:28:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:28:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:28:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:28:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:28:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:28:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7488] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7492] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7499] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7603] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7628] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7629] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7706] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7734] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7751] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7754] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7755] Config: added 'scan_ssid' value '1'
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7756] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7757] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.7758] Config: added 'psk' value '<hidden>'
Oct 11 13:28:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/307
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.8472] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:28:54 IQ138000 NetworkManager[403]: <info>  [1760189334.8474] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:28:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:28:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:29:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:19 IQ138000 wb-watchdog[32530]: [INFO] Interval #433 started. Waiting up to 60 seconds for error...
Oct 11 13:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:29:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:29:20 IQ138000 NetworkManager[403]: <warn>  [1760189360.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:29:20 IQ138000 NetworkManager[403]: <info>  [1760189360.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:29:20 IQ138000 NetworkManager[403]: <warn>  [1760189360.0302] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:29:20 IQ138000 NetworkManager[403]: <info>  [1760189360.0310] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:29:20 IQ138000 NetworkManager[403]: <info>  [1760189360.0312] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:29:20 IQ138000 NetworkManager[403]: <info>  [1760189360.0349] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:29:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/307
Oct 11 13:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:29:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:29:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:29:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:29:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:29:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:29:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:29:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:29:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:29:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:29:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:29:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:29:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:29:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:29:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:29:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:29:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:29:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:29:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:29:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:29:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:29:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:29:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:29:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:29:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:29:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:29:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:29:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:29:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:29:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:29:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:29:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:29:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:29:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:29:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:29:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:29:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:29:26 IQ138000 NetworkManager[403]: <info>  [1760189366.5348] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:29:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:29:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:29:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:29:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:29:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:29:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:29:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:29:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:29:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:29:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:29:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:29:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:29:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:29:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:29:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:29:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:29:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:29:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:29:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:29:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:29:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:29:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:29:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:29:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:29:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:29:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:29:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:29:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:29:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:29:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:29:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:29:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:29:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:29:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:29:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:29:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:29:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:29:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:29:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:30:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8764 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:19 IQ138000 wb-watchdog[805]: [INFO] Interval #434 started. Waiting up to 60 seconds for error...
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.5961] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.5966] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.5971] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6040] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6057] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6068] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6157] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6217] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6295] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6299] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6300] Config: added 'scan_ssid' value '1'
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6301] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6303] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.6303] Config: added 'psk' value '<hidden>'
Oct 11 13:30:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/308
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.7066] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:30:21 IQ138000 NetworkManager[403]: <info>  [1760189421.7068] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:30:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:30:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:30:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:30:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:30:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:30:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:30:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:30:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:30:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:30:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:30:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:30:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:30:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:30:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:30:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:30:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:30:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:30:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:30:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:30:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:30:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:30:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:30:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:30:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:30:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:30:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:30:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:30:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:30:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:30:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:30:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:30:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:30:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:30:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:30:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:30:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:30:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:30:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:30:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:30:47 IQ138000 NetworkManager[403]: <warn>  [1760189447.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:30:47 IQ138000 NetworkManager[403]: <info>  [1760189447.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:30:47 IQ138000 NetworkManager[403]: <warn>  [1760189447.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:30:47 IQ138000 NetworkManager[403]: <info>  [1760189447.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:30:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/308
Oct 11 13:30:47 IQ138000 NetworkManager[403]: <info>  [1760189447.0686] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:30:47 IQ138000 NetworkManager[403]: <info>  [1760189447.0688] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:30:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:30:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:30:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:30:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:30:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:30:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:30:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:30:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:30:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:30:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:30:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:30:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:30:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:30:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:30:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:30:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:30:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:30:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:30:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:30:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:30:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:30:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:30:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:30:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:30:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:30:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:30:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:30:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:30:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:30:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:30:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:30:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:30:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:30:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:30:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:30:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:30:53 IQ138000 NetworkManager[403]: <info>  [1760189453.3533] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:30:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:30:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:19 IQ138000 wb-watchdog[1411]: [INFO] Interval #435 started. Waiting up to 60 seconds for error...
Oct 11 13:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:31:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:31:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:31:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:31:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:31:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:31:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:31:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:31:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:31:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:31:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:31:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:31:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:31:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:31:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:31:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:31:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:31:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:31:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:31:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:31:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:31:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:31:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:31:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:31:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:31:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:31:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:31:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:31:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:31:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:31:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:31:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:31:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:31:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:31:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:31:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:31:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 13:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:31:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 13:31:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 13:31:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 13:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L1, row count 7183, limit 7042
Oct 11 13:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:31:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:31:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3225] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3230] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3235] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3286] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3311] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3314] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3397] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3419] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3438] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3441] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3442] Config: added 'scan_ssid' value '1'
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3443] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3444] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.3445] Config: added 'psk' value '<hidden>'
Oct 11 13:31:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/309
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.4242] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:31:48 IQ138000 NetworkManager[403]: <info>  [1760189508.4246] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:31:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:31:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:31:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:31:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:31:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:31:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:31:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:31:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:31:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:31:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:31:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:31:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:31:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:31:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:31:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:31:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:31:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:31:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:31:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:31:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:31:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:31:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:31:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:31:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:31:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:31:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:31:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:31:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:31:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:31:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:31:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:31:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:31:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:31:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:31:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:31:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:32:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:32:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:14 IQ138000 NetworkManager[403]: <warn>  [1760189534.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:32:14 IQ138000 NetworkManager[403]: <info>  [1760189534.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:32:14 IQ138000 NetworkManager[403]: <warn>  [1760189534.0267] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:32:14 IQ138000 NetworkManager[403]: <info>  [1760189534.0287] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:32:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:32:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/309
Oct 11 13:32:14 IQ138000 NetworkManager[403]: <info>  [1760189534.0852] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:32:14 IQ138000 NetworkManager[403]: <info>  [1760189534.0854] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:14 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:19 IQ138000 wb-watchdog[2153]: [INFO] Interval #436 started. Waiting up to 60 seconds for error...
Oct 11 13:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:20 IQ138000 NetworkManager[403]: <info>  [1760189540.0603] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:32:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:32:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:32:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:32:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:32:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:32:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:32:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:32:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:32:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:32:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:32:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:32:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:32:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:32:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:32:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:32:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:32:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:32:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:32:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:32:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:32:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:32:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:32:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:32:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:32:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:32:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:32:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:32:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:32:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:32:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:32:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:32:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:32:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:32:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:32:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:32:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:32:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:32:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:32:26 IQ138000 npm[3801]: [2025-10-11 13:32:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.29,"last_seen":1760189546560,"linkquality":0,"power_outage_count":25795,"pressure":992.1,"temperature":22.84,"voltage":2995}'
Oct 11 13:32:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:32:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:26 IQ138000 npm[3801]: [2025-10-11 13:32:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":50.29,"last_seen":1760189546689,"linkquality":36,"power_outage_count":25795,"pressure":992.1,"temperature":22.84,"voltage":2995}'
Oct 11 13:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:32:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:32:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:32:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:32:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:32:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:32:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:32:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:32:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:32:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:32:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:32:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:32:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:32:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:32:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:32:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:32:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:32:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:32:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:32:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:32:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:32:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:32:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:32:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:32:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:32:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:32:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:32:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:32:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:32:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:32:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:32:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:32:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:32:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:32:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:32:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:32:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:32:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:32:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:32:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:33:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1549] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1554] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1559] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1611] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1632] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1635] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1714] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1736] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1753] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1756] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1758] Config: added 'scan_ssid' value '1'
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1759] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1760] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:33:15 IQ138000 NetworkManager[403]: <info>  [1760189595.1761] Config: added 'psk' value '<hidden>'
Oct 11 13:33:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/310
Oct 11 13:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:33:19 IQ138000 NetworkManager[403]: <info>  [1760189599.2601] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:33:19 IQ138000 NetworkManager[403]: <info>  [1760189599.2603] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:33:19 IQ138000 wb-watchdog[2796]: [INFO] Interval #437 started. Waiting up to 60 seconds for error...
Oct 11 13:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:33:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:33:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:33:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:33:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:33:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:33:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:33:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:33:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:33:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:33:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:33:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:33:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:33:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:33:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:33:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:33:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:33:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:33:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:33:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:33:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:33:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:33:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:33:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:33:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:33:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:33:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:33:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:33:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:33:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:33:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:33:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:33:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:33:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:33:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:33:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:33:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:33:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5120 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:33:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L2, row count 7183, limit 7042
Oct 11 13:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:40 IQ138000 NetworkManager[403]: <warn>  [1760189620.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:33:40 IQ138000 NetworkManager[403]: <info>  [1760189620.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:33:40 IQ138000 NetworkManager[403]: <warn>  [1760189620.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:33:40 IQ138000 NetworkManager[403]: <info>  [1760189620.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:33:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/310
Oct 11 13:33:40 IQ138000 NetworkManager[403]: <info>  [1760189620.0734] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:33:40 IQ138000 NetworkManager[403]: <info>  [1760189620.0736] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:33:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:45 IQ138000 NetworkManager[403]: <info>  [1760189625.8916] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17432 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:33:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:33:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:33:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:33:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:33:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:33:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:33:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:33:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:33:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:33:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:33:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:33:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:33:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:33:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:33:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:33:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:33:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:33:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:33:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:33:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:33:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:33:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:33:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:33:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:33:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:33:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:33:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:33:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:33:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:33:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:33:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:33:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:33:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:33:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:33:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:33:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:33:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:33:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:34:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:34:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:19 IQ138000 wb-watchdog[3522]: [INFO] Interval #438 started. Waiting up to 60 seconds for error...
Oct 11 13:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:34:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:34:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:34:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:34:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:34:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:34:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:34:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:34:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:34:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:34:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:34:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:34:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:34:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:34:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:34:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:34:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:34:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:34:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:34:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:34:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:34:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:34:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:34:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:34:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:34:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:34:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:34:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:34:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:34:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:34:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:34:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:34:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:34:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:34:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:34:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:34:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:34:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:34:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8412] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8452] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8465] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8562] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8582] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8584] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8702] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8720] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8736] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8739] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8740] Config: added 'scan_ssid' value '1'
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8741] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8742] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.8743] Config: added 'psk' value '<hidden>'
Oct 11 13:34:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/311
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.9435] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:34:40 IQ138000 NetworkManager[403]: <info>  [1760189680.9437] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:34:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 9218 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:34:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:34:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:34:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:34:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:34:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:34:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:34:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:34:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:34:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:34:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:34:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:34:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:34:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:34:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:34:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:34:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:34:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:34:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:34:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:34:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:34:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:34:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:34:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:34:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:34:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:34:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:34:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:34:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:34:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:34:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:34:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:34:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:34:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:34:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:34:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:34:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:34:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:34:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:34:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:35:01 IQ138000 CRON[3917]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:35:01 IQ138000 CRON[3921]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 13:35:01 IQ138000 CRON[3917]: pam_unix(cron:session): session closed for user root
Oct 11 13:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:35:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:35:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:06 IQ138000 NetworkManager[403]: <warn>  [1760189706.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:35:06 IQ138000 NetworkManager[403]: <info>  [1760189706.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:35:06 IQ138000 NetworkManager[403]: <warn>  [1760189706.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:35:06 IQ138000 NetworkManager[403]: <info>  [1760189706.0252] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:35:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/311
Oct 11 13:35:06 IQ138000 NetworkManager[403]: <info>  [1760189706.0794] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:35:06 IQ138000 NetworkManager[403]: <info>  [1760189706.0809] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 NetworkManager[403]: <info>  [1760189712.6686] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:19 IQ138000 wb-watchdog[4167]: [INFO] Interval #439 started. Waiting up to 60 seconds for error...
Oct 11 13:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:35:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:35:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:35:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:35:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:35:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:35:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:35:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:35:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:35:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:35:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:35:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:35:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:35:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:35:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:35:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:35:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:35:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:35:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:35:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:35:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:35:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:35:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:35:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:35:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:35:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:35:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:35:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:35:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:35:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:35:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:35:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:35:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:35:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:35:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:35:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:35:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:35:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:35:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:35:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:35:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:35:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:35:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:35:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:35:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:35:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:35:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:35:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:35:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:35:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:35:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:35:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:35:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:35:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:35:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:35:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:35:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:35:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:35:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:35:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:35:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:35:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:35:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:35:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:35:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:35:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:35:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:35:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:35:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:35:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:35:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:35:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:35:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:35:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:35:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:35:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:35:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:35:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4640 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:36:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6618] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6636] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6652] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6727] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6748] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6750] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6842] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6874] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6943] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6956] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6970] Config: added 'scan_ssid' value '1'
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6977] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6981] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.6982] Config: added 'psk' value '<hidden>'
Oct 11 13:36:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/312
Oct 11 13:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.7785] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:36:07 IQ138000 NetworkManager[403]: <info>  [1760189767.7787] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:36:19 IQ138000 wb-watchdog[4895]: [INFO] Interval #440 started. Waiting up to 60 seconds for error...
Oct 11 13:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:36:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:36:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:36:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:36:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:36:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:36:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:36:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:36:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:36:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:36:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:36:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:36:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:36:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:36:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:36:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:36:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:36:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:36:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:36:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:36:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:36:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:36:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:36:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:36:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:36:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:36:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:36:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:36:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:36:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:36:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:36:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:36:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:36:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:36:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:36:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:36:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:36:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:36:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:36:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:33 IQ138000 NetworkManager[403]: <warn>  [1760189793.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:36:33 IQ138000 NetworkManager[403]: <info>  [1760189793.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:36:33 IQ138000 NetworkManager[403]: <warn>  [1760189793.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:36:33 IQ138000 NetworkManager[403]: <info>  [1760189793.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:36:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/312
Oct 11 13:36:33 IQ138000 NetworkManager[403]: <info>  [1760189793.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:36:33 IQ138000 NetworkManager[403]: <info>  [1760189793.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:36:39 IQ138000 NetworkManager[403]: <info>  [1760189799.4168] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:36:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:36:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:36:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:36:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:36:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:36:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:36:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:36:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:36:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:36:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:36:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:36:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:36:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:36:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:36:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:36:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:36:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:36:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:36:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:36:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:36:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:36:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:36:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:36:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:36:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:36:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:36:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:36:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:36:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:36:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:36:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:36:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:36:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:36:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:36:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:36:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:36:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:36:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:37:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:19 IQ138000 wb-watchdog[5518]: [INFO] Interval #441 started. Waiting up to 60 seconds for error...
Oct 11 13:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:37:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:37:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:37:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:37:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:37:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:37:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:37:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:37:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:37:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:37:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:37:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:37:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:37:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:37:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:37:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:37:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:37:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:37:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:37:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:37:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:37:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:37:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:37:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:37:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:37:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:37:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:37:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:37:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:37:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:37:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:37:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:37:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:37:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:37:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:37:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:37:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:26 IQ138000 npm[3801]: [2025-10-11 13:37:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.97,"last_seen":1760189846721,"linkquality":58,"power_outage_count":35250,"temperature":24.52,"voltage":3075}'
Oct 11 13:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:37:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4536] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4571] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4592] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4721] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4740] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4848] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4878] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4911] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4925] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4926] Config: added 'scan_ssid' value '1'
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4927] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4929] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.4930] Config: added 'psk' value '<hidden>'
Oct 11 13:37:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/313
Oct 11 13:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.5631] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:37:34 IQ138000 NetworkManager[403]: <info>  [1760189854.5633] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:37:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:37:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:37:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:37:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:37:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:37:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:37:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:37:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:37:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:37:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:37:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:37:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:37:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:37:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:37:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:37:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:37:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:37:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:37:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:37:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:37:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:37:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:37:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:37:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:37:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:37:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:37:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:37:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:37:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:37:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:37:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:37:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:37:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:37:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:37:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:37:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:37:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:37:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:37:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:37:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:38:00 IQ138000 NetworkManager[403]: <warn>  [1760189880.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:38:00 IQ138000 NetworkManager[403]: <info>  [1760189880.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:38:00 IQ138000 NetworkManager[403]: <warn>  [1760189880.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:38:00 IQ138000 NetworkManager[403]: <info>  [1760189880.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:38:00 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:38:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/313
Oct 11 13:38:00 IQ138000 NetworkManager[403]: <info>  [1760189880.0680] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:38:00 IQ138000 NetworkManager[403]: <info>  [1760189880.0682] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:00 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:38:01 IQ138000 CRON[5992]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:38:01 IQ138000 CRON[5996]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 13:38:02 IQ138000 sSMTP[6015]: Unable to locate mail
Oct 11 13:38:02 IQ138000 sSMTP[6015]: Cannot open mail:25
Oct 11 13:38:02 IQ138000 cron[6015]: sendmail: Cannot open mail:25
Oct 11 13:38:02 IQ138000 CRON[5992]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 13:38:02 IQ138000 CRON[5992]: pam_unix(cron:session): session closed for user root
Oct 11 13:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:38:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:06 IQ138000 NetworkManager[403]: <info>  [1760189886.1715] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:38:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:19 IQ138000 wb-watchdog[6237]: [INFO] Interval #442 started. Waiting up to 60 seconds for error...
Oct 11 13:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:38:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:38:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:38:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:38:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:38:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:38:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:38:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:38:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:38:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:38:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:38:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:38:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:38:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:38:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:38:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:38:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:38:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:38:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:38:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:38:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:38:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:38:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:38:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:38:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:38:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:38:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:38:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:38:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:38:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:38:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:38:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:38:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:38:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:38:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:38:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:38:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:38:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:38:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:38:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:38:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:38:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:38:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:38:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:38:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:38:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:38:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:38:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:38:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:38:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:38:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:38:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:38:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:38:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:38:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:38:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:38:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:38:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:38:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:38:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:38:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:38:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:38:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:38:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:38:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:38:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:38:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:38:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:38:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:38:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:38:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:38:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:38:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:38:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:38:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:38:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:38:55 IQ138000 npm[3801]: [2025-10-11 13:38:55] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.19,"last_seen":1760189935872,"linkquality":102,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 13:38:55 IQ138000 npm[3801]: [2025-10-11 13:38:55] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.17,"last_seen":1760189935883,"linkquality":105,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 13:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L2, row count 7183, limit 7042
Oct 11 13:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2377] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2398] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2420] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2613] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2645] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2647] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2786] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2809] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2851] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2855] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2856] Config: added 'scan_ssid' value '1'
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2857] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2858] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.2859] Config: added 'psk' value '<hidden>'
Oct 11 13:39:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/314
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.3547] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:39:01 IQ138000 NetworkManager[403]: <info>  [1760189941.3550] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:39:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:39:06 IQ138000 NetworkManager[403]: <info>  [1760189946.9309] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:39:06 IQ138000 NetworkManager[403]: <info>  [1760189946.9340] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5892 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:39:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:15 IQ138000 NetworkManager[403]: <info>  [1760189955.3554] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:39:15 IQ138000 NetworkManager[403]: <info>  [1760189955.3556] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:19 IQ138000 wb-watchdog[6868]: [INFO] Interval #443 started. Waiting up to 60 seconds for error...
Oct 11 13:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:39:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:39:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:39:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:39:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:39:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:39:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:39:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:39:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:39:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:39:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:39:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:39:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:39:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:39:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:39:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:39:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:39:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:39:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:39:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:39:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:39:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:39:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:39:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:39:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:39:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:39:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:39:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:39:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:39:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:39:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:39:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:39:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:39:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:39:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:39:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:39:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:39:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:39:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:39:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:39:27 IQ138000 NetworkManager[403]: <warn>  [1760189967.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:39:27 IQ138000 NetworkManager[403]: <info>  [1760189967.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:39:27 IQ138000 NetworkManager[403]: <warn>  [1760189967.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:39:27 IQ138000 NetworkManager[403]: <info>  [1760189967.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:39:27 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:39:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/314
Oct 11 13:39:27 IQ138000 NetworkManager[403]: <info>  [1760189967.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:39:27 IQ138000 NetworkManager[403]: <info>  [1760189967.0705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:32 IQ138000 NetworkManager[403]: <info>  [1760189972.9872] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:39:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:39:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:39:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:39:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:39:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:39:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:39:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:39:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:39:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:39:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:39:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:39:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:39:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:39:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:39:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:39:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:39:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:39:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:39:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:39:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:39:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:39:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:39:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:39:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:39:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:39:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:39:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:39:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:39:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:39:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:39:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:39:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:39:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:39:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:39:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:39:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:39:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:39:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:39:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:39:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:39:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 8974 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:19 IQ138000 wb-watchdog[7576]: [INFO] Interval #444 started. Waiting up to 60 seconds for error...
Oct 11 13:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:40:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:40:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:40:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:40:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:40:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:40:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:40:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:40:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:40:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:40:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:40:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:40:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:40:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:40:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:40:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:40:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:40:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:40:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:40:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:40:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:40:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:40:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:40:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:40:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:40:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:40:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:40:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:40:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:40:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:40:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:40:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:40:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:40:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:40:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:40:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:40:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:40:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:40:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9704] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9708] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9714] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9768] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9785] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9787] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9909] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9940] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9973] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:40:27 IQ138000 NetworkManager[403]: <info>  [1760190027.9988] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:40:28 IQ138000 NetworkManager[403]: <info>  [1760190028.0002] Config: added 'scan_ssid' value '1'
Oct 11 13:40:28 IQ138000 NetworkManager[403]: <info>  [1760190028.0011] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:40:28 IQ138000 NetworkManager[403]: <info>  [1760190028.0013] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:40:28 IQ138000 NetworkManager[403]: <info>  [1760190028.0014] Config: added 'psk' value '<hidden>'
Oct 11 13:40:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/315
Oct 11 13:40:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:40:31 IQ138000 NetworkManager[403]: <info>  [1760190031.0735] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:40:31 IQ138000 NetworkManager[403]: <info>  [1760190031.0738] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:40:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:40:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:53 IQ138000 NetworkManager[403]: <warn>  [1760190053.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:40:53 IQ138000 NetworkManager[403]: <info>  [1760190053.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:40:53 IQ138000 NetworkManager[403]: <warn>  [1760190053.0297] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:40:53 IQ138000 NetworkManager[403]: <info>  [1760190053.0329] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:40:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/315
Oct 11 13:40:53 IQ138000 NetworkManager[403]: <info>  [1760190053.0894] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:40:53 IQ138000 NetworkManager[403]: <info>  [1760190053.0904] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:40:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:40:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:40:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:40:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:40:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:40:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:40:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:40:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:40:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:40:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:40:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:40:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:40:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:40:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:40:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:40:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:40:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:40:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:40:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:40:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:40:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:40:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:40:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:40:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:40:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:40:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:40:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:40:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:40:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:40:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:40:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:40:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:40:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:40:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:40:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:40:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:40:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:40:58 IQ138000 NetworkManager[403]: <info>  [1760190058.7199] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:41:19 IQ138000 wb-watchdog[8189]: [INFO] Interval #445 started. Waiting up to 60 seconds for error...
Oct 11 13:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:41:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:41:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:41:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:41:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:41:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:41:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:41:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:41:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:41:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:41:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:41:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:41:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:41:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:41:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:41:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:41:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:41:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:41:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:41:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:41:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:41:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:41:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:41:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:41:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:41:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:41:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:41:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:41:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:41:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:41:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:41:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:41:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:41:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:41:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:41:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:41:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:41:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:41:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:41:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L3, row count 7183, limit 7042
Oct 11 13:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 18 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:41:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:41:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:51 IQ138000 npm[3801]: [2025-10-11 13:41:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.17,"last_seen":1760190111729,"linkquality":102,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 13:41:51 IQ138000 npm[3801]: [2025-10-11 13:41:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.22,"last_seen":1760190111742,"linkquality":98,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 13:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.7914] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.7919] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.7925] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.7980] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8013] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8015] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8099] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8118] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8138] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8143] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8145] Config: added 'scan_ssid' value '1'
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8145] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8147] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8147] Config: added 'psk' value '<hidden>'
Oct 11 13:41:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/316
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8885] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:41:53 IQ138000 NetworkManager[403]: <info>  [1760190113.8888] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:41:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:41:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:41:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:41:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:41:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:41:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:41:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:41:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:41:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:41:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:41:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:41:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:41:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:41:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:41:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:41:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:41:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:41:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:41:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:41:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:41:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:41:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:41:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:41:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:41:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:41:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:41:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:41:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:41:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:41:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:41:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:41:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:41:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:41:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:41:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:42:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:42:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:42:19 IQ138000 NetworkManager[403]: <warn>  [1760190139.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:42:19 IQ138000 NetworkManager[403]: <info>  [1760190139.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:42:19 IQ138000 NetworkManager[403]: <warn>  [1760190139.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:42:19 IQ138000 NetworkManager[403]: <info>  [1760190139.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:42:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/316
Oct 11 13:42:19 IQ138000 NetworkManager[403]: <info>  [1760190139.0713] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:42:19 IQ138000 NetworkManager[403]: <info>  [1760190139.0715] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:42:19 IQ138000 wb-watchdog[8898]: [INFO] Interval #446 started. Waiting up to 60 seconds for error...
Oct 11 13:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:42:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:42:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:42:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:42:25 IQ138000 NetworkManager[403]: <info>  [1760190145.5165] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8966 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:42:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:42:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:42:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:42:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:42:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:42:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:42:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:42:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:42:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:42:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:42:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:42:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:42:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:42:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:42:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:42:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:42:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:42:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:42:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:42:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:42:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:42:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:42:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:42:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:42:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:42:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:42:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:42:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:42:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:42:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:42:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:42:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:42:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:42:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:42:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:42:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:42:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16932 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:42:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:42:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:42:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:42:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:42:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:42:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:42:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:42:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:42:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:42:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:42:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:42:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:42:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:42:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:42:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:42:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:42:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:42:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:42:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:42:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:42:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:42:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:42:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:42:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:42:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:42:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:42:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:42:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:42:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:42:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:42:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:42:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:42:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:42:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:42:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:42:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:42:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:42:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:42:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:42:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:43:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:19 IQ138000 wb-watchdog[9496]: [INFO] Interval #447 started. Waiting up to 60 seconds for error...
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.4999] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5014] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5052] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5127] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5158] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5170] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5265] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5287] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5307] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5311] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5312] Config: added 'scan_ssid' value '1'
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5313] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5314] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.5315] Config: added 'psk' value '<hidden>'
Oct 11 13:43:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/317
Oct 11 13:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.6034] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:43:20 IQ138000 NetworkManager[403]: <info>  [1760190200.6036] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:43:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:43:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:43:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:43:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:43:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:43:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:43:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:43:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:43:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:43:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:43:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:43:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:43:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:43:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:43:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:43:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:43:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:43:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:43:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:43:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:43:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:43:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:43:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:43:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:43:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:43:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:43:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:43:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:43:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:43:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:43:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:43:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:43:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:43:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:43:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:43:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:43:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:46 IQ138000 NetworkManager[403]: <warn>  [1760190226.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:43:46 IQ138000 NetworkManager[403]: <info>  [1760190226.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:43:46 IQ138000 NetworkManager[403]: <warn>  [1760190226.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:43:46 IQ138000 NetworkManager[403]: <info>  [1760190226.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:43:46 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:43:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/317
Oct 11 13:43:46 IQ138000 NetworkManager[403]: <info>  [1760190226.0717] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:43:46 IQ138000 NetworkManager[403]: <info>  [1760190226.0719] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:46 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:43:52 IQ138000 NetworkManager[403]: <info>  [1760190232.2828] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:43:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:43:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:43:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:43:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:43:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:43:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:43:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:43:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:43:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:43:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:43:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:43:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:43:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:43:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:43:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:43:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:43:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:43:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:43:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:43:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:43:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:43:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:43:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:43:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:43:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:43:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:43:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:43:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:43:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:43:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:43:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:43:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:43:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:43:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:43:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:43:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:43:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:43:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:44:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:44:19 IQ138000 wb-watchdog[10209]: [INFO] Interval #448 started. Waiting up to 60 seconds for error...
Oct 11 13:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:44:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:44:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:44:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:44:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:44:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:44:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:44:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:44:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:44:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:44:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:44:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:44:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:44:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:44:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:44:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:44:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:44:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:44:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:44:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:44:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:44:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:44:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:44:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:44:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:44:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:44:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:44:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:44:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:44:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:44:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:44:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:44:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:44:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:44:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:44:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:44:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:44:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:44:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3266] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3271] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3277] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3334] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3353] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3354] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3434] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3478] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3505] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3512] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3513] Config: added 'scan_ssid' value '1'
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3514] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3515] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:44:47 IQ138000 NetworkManager[403]: <info>  [1760190287.3516] Config: added 'psk' value '<hidden>'
Oct 11 13:44:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/318
Oct 11 13:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:44:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:44:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:44:51 IQ138000 NetworkManager[403]: <info>  [1760190291.4234] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:44:51 IQ138000 NetworkManager[403]: <info>  [1760190291.4237] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:44:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:44:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:44:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:44:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:44:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:44:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:44:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:44:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:44:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:44:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:44:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:44:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:44:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:44:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:44:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:44:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:44:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:44:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:44:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:44:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:44:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:44:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:44:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:44:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:44:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:44:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:44:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:44:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:44:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:44:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:44:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:44:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:44:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:44:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:44:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:44:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:44:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:45:01 IQ138000 CRON[10592]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:45:01 IQ138000 CRON[10596]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 13:45:01 IQ138000 CRON[10592]: pam_unix(cron:session): session closed for user root
Oct 11 13:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 18 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:05 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 13:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:45:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 NetworkManager[403]: <warn>  [1760190313.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:45:13 IQ138000 NetworkManager[403]: <info>  [1760190313.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:45:13 IQ138000 NetworkManager[403]: <warn>  [1760190313.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:45:13 IQ138000 NetworkManager[403]: <info>  [1760190313.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:45:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/318
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 NetworkManager[403]: <info>  [1760190313.0666] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:45:13 IQ138000 NetworkManager[403]: <info>  [1760190313.0668] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:45:19 IQ138000 NetworkManager[403]: <info>  [1760190319.0935] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:19 IQ138000 wb-watchdog[10842]: [INFO] Interval #449 started. Waiting up to 60 seconds for error...
Oct 11 13:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:45:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:45:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:45:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:45:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:45:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:45:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:45:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:45:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:45:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:45:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:45:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:45:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:45:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:45:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:45:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:45:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:45:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:45:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:45:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:45:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:45:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:45:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:45:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:45:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:45:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:45:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:45:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:45:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:45:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:45:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:45:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:45:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:45:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:45:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:45:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:45:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:45:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:45:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:42 IQ138000 npm[3801]: [2025-10-11 13:45:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.22,"last_seen":1760190342803,"linkquality":98,"power_outage_count":48745,"temperature":27.17,"voltage":3025}'
Oct 11 13:45:42 IQ138000 npm[3801]: [2025-10-11 13:45:42] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.08,"last_seen":1760190342814,"linkquality":94,"power_outage_count":48745,"temperature":27.17,"voltage":3025}'
Oct 11 13:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:45:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:45:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:45:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:45:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:45:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:45:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:45:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:45:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:45:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:45:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:45:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:45:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:45:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:45:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:45:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:45:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:45:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:45:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:45:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:45:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:45:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:45:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:45:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:45:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:45:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:45:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:45:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:45:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:45:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:45:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:45:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:45:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:45:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:45:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:45:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:45:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:45:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:45:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:46:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:46:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0780] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0786] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0792] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0893] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0910] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0912] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.0995] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1016] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1057] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1061] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1062] Config: added 'scan_ssid' value '1'
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1063] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1064] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1065] Config: added 'psk' value '<hidden>'
Oct 11 13:46:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/319
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1929] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:46:14 IQ138000 NetworkManager[403]: <info>  [1760190374.1931] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:19 IQ138000 wb-watchdog[11519]: [INFO] Interval #450 started. Waiting up to 60 seconds for error...
Oct 11 13:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:46:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:46:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:46:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:46:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:46:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:46:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:46:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:46:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:46:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:46:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:46:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:46:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:46:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:46:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:46:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:46:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:46:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:46:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:46:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:46:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:46:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:46:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:46:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:46:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:46:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:46:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:46:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:46:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:46:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:46:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:46:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:46:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:46:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:46:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:46:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:46:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:46:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:46:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:46:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:39 IQ138000 NetworkManager[403]: <warn>  [1760190399.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:46:39 IQ138000 NetworkManager[403]: <info>  [1760190399.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:46:39 IQ138000 NetworkManager[403]: <warn>  [1760190399.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:46:39 IQ138000 NetworkManager[403]: <info>  [1760190399.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:46:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/319
Oct 11 13:46:39 IQ138000 NetworkManager[403]: <info>  [1760190399.0728] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:46:39 IQ138000 NetworkManager[403]: <info>  [1760190399.0751] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:44 IQ138000 NetworkManager[403]: <info>  [1760190404.8065] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:46:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:46:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:46:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:46:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:46:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:46:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:46:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:46:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:46:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:46:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:46:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:46:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:46:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:46:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:46:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:46:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:46:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:46:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:46:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:46:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:46:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:46:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:46:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:46:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:46:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:46:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:46:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:46:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:46:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:46:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:46:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:46:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:46:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:46:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:46:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:46:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:46:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:19 IQ138000 wb-watchdog[12147]: [INFO] Interval #451 started. Waiting up to 60 seconds for error...
Oct 11 13:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:47:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:47:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:47:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:47:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:47:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:47:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:47:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:47:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:47:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:47:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:47:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:47:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:47:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:47:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:47:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:47:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:47:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:47:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:47:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:47:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:47:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:47:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:47:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:47:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:47:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:47:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:47:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:47:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:47:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:47:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:47:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:47:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:47:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:47:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:47:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:47:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:47:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:47:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9433] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9437] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9444] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9554] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9591] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9599] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9730] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9770] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9823] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9828] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9829] Config: added 'scan_ssid' value '1'
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9830] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9832] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:47:39 IQ138000 NetworkManager[403]: <info>  [1760190459.9833] Config: added 'psk' value '<hidden>'
Oct 11 13:47:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/320
Oct 11 13:47:40 IQ138000 NetworkManager[403]: <info>  [1760190460.0540] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:47:40 IQ138000 NetworkManager[403]: <info>  [1760190460.0542] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:47:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:47:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:47:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:47:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:47:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:47:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:47:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:47:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:47:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:47:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:47:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:47:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:47:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:47:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:47:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:47:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:47:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:47:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:47:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:47:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:47:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:47:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:47:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:47:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:47:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:47:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:47:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:47:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:47:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:47:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:47:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:47:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:47:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:47:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:47:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:47:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:47:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:47:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:47:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:05 IQ138000 NetworkManager[403]: <warn>  [1760190485.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:48:05 IQ138000 NetworkManager[403]: <info>  [1760190485.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:48:05 IQ138000 NetworkManager[403]: <warn>  [1760190485.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:48:05 IQ138000 NetworkManager[403]: <info>  [1760190485.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:48:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/320
Oct 11 13:48:05 IQ138000 NetworkManager[403]: <info>  [1760190485.0741] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:48:05 IQ138000 NetworkManager[403]: <info>  [1760190485.0760] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:10 IQ138000 NetworkManager[403]: <info>  [1760190490.6884] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:48:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:48:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:19 IQ138000 wb-watchdog[12844]: [INFO] Interval #452 started. Waiting up to 60 seconds for error...
Oct 11 13:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:48:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:48:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:48:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:48:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:48:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:48:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:48:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:48:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:48:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:48:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:48:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:48:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:48:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:48:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:48:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:48:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:48:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:48:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:48:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:48:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:48:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:48:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:48:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:48:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:48:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:48:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:48:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:48:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:48:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:48:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:48:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:48:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:48:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:48:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:48:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:48:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:48:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:48:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:48:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:48:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:48:53 IQ138000 npm[3801]: [2025-10-11 13:48:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.08,"last_seen":1760190533710,"linkquality":98,"power_outage_count":48745,"temperature":27.12,"voltage":3025}'
Oct 11 13:48:53 IQ138000 npm[3801]: [2025-10-11 13:48:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.2,"last_seen":1760190533721,"linkquality":105,"power_outage_count":48745,"temperature":27.12,"voltage":3025}'
Oct 11 13:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:48:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L2, row count 7183, limit 7042
Oct 11 13:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:48:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:48:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:48:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:48:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:48:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:48:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:48:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:48:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:48:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:48:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:48:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:48:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:48:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:48:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:48:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:48:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:48:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:48:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:48:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:48:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:48:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:48:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:48:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:48:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:48:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:48:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:48:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:49:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:49:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:49:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:49:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:49:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:49:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:49:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:49:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:49:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:49:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:49:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6677] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6690] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6697] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6807] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6837] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6848] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6959] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.6980] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7006] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7012] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7013] Config: added 'scan_ssid' value '1'
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7014] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7015] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7016] Config: added 'psk' value '<hidden>'
Oct 11 13:49:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/321
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7782] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:49:05 IQ138000 NetworkManager[403]: <info>  [1760190545.7784] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:49:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:19 IQ138000 wb-watchdog[13456]: [INFO] Interval #453 started. Waiting up to 60 seconds for error...
Oct 11 13:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:49:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:49:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:49:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:49:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:49:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:49:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:49:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:49:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:49:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:49:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:49:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:49:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:49:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:49:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:49:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:49:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:49:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:49:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:49:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:49:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:49:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:49:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:49:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:49:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:49:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:49:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:49:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:49:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:49:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:49:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:49:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:49:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:49:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:49:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:49:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:49:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:49:31 IQ138000 NetworkManager[403]: <warn>  [1760190571.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:49:31 IQ138000 NetworkManager[403]: <info>  [1760190571.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:49:31 IQ138000 NetworkManager[403]: <warn>  [1760190571.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:49:31 IQ138000 NetworkManager[403]: <info>  [1760190571.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:49:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/321
Oct 11 13:49:31 IQ138000 NetworkManager[403]: <info>  [1760190571.0771] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:49:31 IQ138000 NetworkManager[403]: <info>  [1760190571.0773] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:37 IQ138000 NetworkManager[403]: <info>  [1760190577.4520] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:49:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:49:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:50:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:50:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:50:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:50:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:50:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:50:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:50:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:50:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:50:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:50:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:50:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:50:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:50:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:50:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:50:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:50:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:50:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:50:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:50:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:50:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:50:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:50:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:50:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:50:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:50:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:50:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:50:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:50:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:50:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:50:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:50:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:50:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:50:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:50:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:50:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:50:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:50:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:50:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:50:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:50:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:50:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:19 IQ138000 wb-watchdog[14172]: [INFO] Interval #454 started. Waiting up to 60 seconds for error...
Oct 11 13:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:50:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:50:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:50:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:50:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:50:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:50:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:50:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:50:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:50:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:50:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:50:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:50:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:50:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:50:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:50:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:50:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:50:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:50:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:50:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:50:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:50:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:50:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:50:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:50:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:50:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:50:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:50:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:50:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:50:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:50:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:50:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:50:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:50:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:50:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:50:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:50:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7350] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7356] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7362] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7452] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7471] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7473] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7575] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7600] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7633] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7637] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7638] Config: added 'scan_ssid' value '1'
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7639] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7641] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.7641] Config: added 'psk' value '<hidden>'
Oct 11 13:50:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/322
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.8363] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:50:32 IQ138000 NetworkManager[403]: <info>  [1760190632.8365] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:50:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:50:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:50:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L3, row count 7183, limit 7042
Oct 11 13:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:50:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:50:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:50:58 IQ138000 NetworkManager[403]: <warn>  [1760190658.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:50:58 IQ138000 NetworkManager[403]: <info>  [1760190658.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:50:58 IQ138000 NetworkManager[403]: <warn>  [1760190658.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:50:58 IQ138000 NetworkManager[403]: <info>  [1760190658.0252] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:50:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/322
Oct 11 13:50:58 IQ138000 NetworkManager[403]: <info>  [1760190658.0675] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:50:58 IQ138000 NetworkManager[403]: <info>  [1760190658.0677] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:51:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:51:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:51:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:51:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:51:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:51:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:51:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:51:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:51:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:51:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:51:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:51:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:51:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:51:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:51:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:51:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:51:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:51:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:51:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:51:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:51:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:51:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:51:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:51:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:51:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:51:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:51:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:51:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:51:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:51:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:51:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:51:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:51:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:51:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:51:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:51:04 IQ138000 NetworkManager[403]: <info>  [1760190664.5371] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:51:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:51:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:51:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:51:19 IQ138000 wb-watchdog[14775]: [INFO] Interval #455 started. Waiting up to 60 seconds for error...
Oct 11 13:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:51:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:51:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:51:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:51:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:51:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:51:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:51:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:51:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:51:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:51:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:51:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:51:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:51:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:51:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:51:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:51:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:51:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:51:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:51:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:51:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:51:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:51:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:51:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:51:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:51:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:51:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:51:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:51:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:51:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:51:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:51:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:51:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:51:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:51:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:51:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:51:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:51:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:51:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:51:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:51:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:51:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L3, row count 7183, limit 7042
Oct 11 13:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:51:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:51:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5440] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5444] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5454] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5511] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5528] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5530] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5633] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5654] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5673] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5676] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5677] Config: added 'scan_ssid' value '1'
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5678] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5679] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.5680] Config: added 'psk' value '<hidden>'
Oct 11 13:51:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/323
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.6352] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:51:59 IQ138000 NetworkManager[403]: <info>  [1760190719.6354] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:52:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:52:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:52:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:52:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:52:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:52:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:52:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:52:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:52:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:52:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:52:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:52:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:52:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:52:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:52:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:52:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:52:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:52:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:52:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:52:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:52:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:52:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:52:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:52:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:52:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:52:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:52:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:52:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:52:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:52:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:52:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:52:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:52:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:52:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:52:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:52:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:52:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:52:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:19 IQ138000 wb-watchdog[15469]: [INFO] Interval #456 started. Waiting up to 60 seconds for error...
Oct 11 13:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:52:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:52:25 IQ138000 NetworkManager[403]: <warn>  [1760190745.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:52:25 IQ138000 NetworkManager[403]: <info>  [1760190745.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:52:25 IQ138000 NetworkManager[403]: <warn>  [1760190745.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:52:25 IQ138000 NetworkManager[403]: <info>  [1760190745.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:52:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:52:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/323
Oct 11 13:52:25 IQ138000 NetworkManager[403]: <info>  [1760190745.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:52:25 IQ138000 NetworkManager[403]: <info>  [1760190745.0702] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:52:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 13:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:52:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:52:31 IQ138000 NetworkManager[403]: <info>  [1760190751.2785] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:52:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:52:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:52:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:52:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:52:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:52:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:52:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:52:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:52:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:52:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:52:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:52:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:52:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:52:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:52:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:52:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:52:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:52:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:52:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:52:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:52:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:52:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:52:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:52:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:52:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:52:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:52:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:52:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:52:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:52:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:52:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:52:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:52:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:52:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:52:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:52:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:52:34 IQ138000 npm[3801]: [2025-10-11 13:52:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.2,"last_seen":1760190754750,"linkquality":94,"power_outage_count":48745,"temperature":27.29,"voltage":3025}'
Oct 11 13:52:34 IQ138000 npm[3801]: [2025-10-11 13:52:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.15,"last_seen":1760190754762,"linkquality":98,"power_outage_count":48745,"temperature":27.29,"voltage":3025}'
Oct 11 13:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:52:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 13:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 13:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 13:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 13:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 13:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:52:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:52:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L3, row count 7183, limit 7042
Oct 11 13:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:53:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:53:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:53:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:53:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:53:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:53:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:53:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:53:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:53:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:53:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:53:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:53:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:53:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:53:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:53:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:53:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:53:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:53:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:53:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:53:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:53:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:53:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:53:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:53:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:53:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:53:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:53:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:53:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:53:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:53:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:53:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:53:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:53:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:53:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:53:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:53:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:53:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:53:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:53:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:19 IQ138000 wb-watchdog[16085]: [INFO] Interval #457 started. Waiting up to 60 seconds for error...
Oct 11 13:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3760] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3764] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3770] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3824] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3842] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3844] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.3976] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4034] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4075] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4091] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4093] Config: added 'scan_ssid' value '1'
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4094] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4096] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:53:26 IQ138000 NetworkManager[403]: <info>  [1760190806.4097] Config: added 'psk' value '<hidden>'
Oct 11 13:53:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/324
Oct 11 13:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:28 IQ138000 NetworkManager[403]: <info>  [1760190808.4957] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:53:28 IQ138000 NetworkManager[403]: <info>  [1760190808.4959] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:53:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:53:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:53:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:53:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:53:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:53:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:53:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:53:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:53:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:53:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:53:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:53:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:53:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:53:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:53:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:53:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:53:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:53:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:53:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:53:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:53:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:53:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:53:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:53:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:53:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:53:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:53:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:53:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:53:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:53:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:53:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:53:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:53:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:53:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:53:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:53:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 13:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:53:52 IQ138000 NetworkManager[403]: <warn>  [1760190832.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:53:52 IQ138000 NetworkManager[403]: <info>  [1760190832.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:53:52 IQ138000 NetworkManager[403]: <warn>  [1760190832.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:53:52 IQ138000 NetworkManager[403]: <info>  [1760190832.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:53:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/324
Oct 11 13:53:52 IQ138000 NetworkManager[403]: <info>  [1760190832.0621] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:53:52 IQ138000 NetworkManager[403]: <info>  [1760190832.0623] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:53:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:53:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:53:58 IQ138000 NetworkManager[403]: <info>  [1760190838.1135] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:54:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:54:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:54:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:54:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:54:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:54:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:54:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:54:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:54:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:54:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:54:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:54:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:54:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:54:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:54:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:54:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:54:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:54:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:54:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:54:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:54:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:54:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:54:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:54:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:54:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:54:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:54:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:54:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:54:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:54:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:54:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:54:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:54:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:54:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:54:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:54:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:54:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:54:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:19 IQ138000 wb-watchdog[16790]: [INFO] Interval #458 started. Waiting up to 60 seconds for error...
Oct 11 13:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:54:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:54:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:54:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:54:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:54:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:54:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:54:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:54:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:54:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:54:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:54:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:54:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:54:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:54:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:54:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:54:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:54:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:54:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:54:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:54:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:54:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:54:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:54:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:54:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:54:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:54:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:54:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:54:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:54:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:54:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:54:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:54:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:54:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:54:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:54:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:54:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:54:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:54:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:54:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:54:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.1870] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.1904] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.1914] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2015] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2039] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2051] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2171] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2190] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2209] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2212] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2213] Config: added 'scan_ssid' value '1'
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2214] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2215] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2216] Config: added 'psk' value '<hidden>'
Oct 11 13:54:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/325
Oct 11 13:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2935] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:54:53 IQ138000 NetworkManager[403]: <info>  [1760190893.2937] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:01 IQ138000 CRON[17171]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 13:55:01 IQ138000 CRON[17175]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 13:55:01 IQ138000 CRON[17171]: pam_unix(cron:session): session closed for user root
Oct 11 13:55:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:55:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:55:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:55:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:55:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:55:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:55:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:55:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:55:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:55:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:55:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:55:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:55:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:55:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:55:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:55:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:55:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:55:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:55:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:55:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:55:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:55:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:55:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:55:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:55:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:55:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:55:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:55:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:55:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:55:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:55:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:55:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:55:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:55:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:55:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:55:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 13:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:18 IQ138000 NetworkManager[403]: <warn>  [1760190918.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:55:18 IQ138000 NetworkManager[403]: <info>  [1760190918.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:55:18 IQ138000 NetworkManager[403]: <warn>  [1760190918.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:55:18 IQ138000 NetworkManager[403]: <info>  [1760190918.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:55:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/325
Oct 11 13:55:18 IQ138000 NetworkManager[403]: <info>  [1760190918.0740] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:55:18 IQ138000 NetworkManager[403]: <info>  [1760190918.0742] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:19 IQ138000 wb-watchdog[17418]: [INFO] Interval #459 started. Waiting up to 60 seconds for error...
Oct 11 13:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:55:23 IQ138000 NetworkManager[403]: <info>  [1760190923.8901] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:55:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:55:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:55:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:55:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:55:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:55:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:55:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:55:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:55:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:55:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:55:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:55:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:55:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:55:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:55:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:55:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:55:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:55:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:55:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:55:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:55:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:55:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:55:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:55:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:55:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:55:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:55:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:55:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:55:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:55:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:55:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:55:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:55:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:55:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:55:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:55:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:55:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:55:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:55:45 IQ138000 npm[3801]: [2025-10-11 13:55:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.15,"last_seen":1760190945675,"linkquality":102,"power_outage_count":48745,"temperature":27.15,"voltage":3025}'
Oct 11 13:55:45 IQ138000 npm[3801]: [2025-10-11 13:55:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.42,"last_seen":1760190945696,"linkquality":102,"power_outage_count":48745,"temperature":27.15,"voltage":3025}'
Oct 11 13:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 13:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:55:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:55:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:55:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:56:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:56:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:56:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:56:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:56:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:56:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:56:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:56:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:56:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:56:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:56:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:56:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:56:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:56:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:56:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:56:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:56:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:56:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:56:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:56:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:56:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:56:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:56:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:56:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:56:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:56:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:56:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:56:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:56:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:56:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:56:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:56:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:56:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:56:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:56:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:56:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:56:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:56:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 13:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:56:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:56:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 13:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9242 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:56:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:56:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.8938] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.8943] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.8957] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9032] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9050] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9052] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9156] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9176] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9195] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9200] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9201] Config: added 'scan_ssid' value '1'
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9202] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9204] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9204] Config: added 'psk' value '<hidden>'
Oct 11 13:56:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/326
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9907] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:56:18 IQ138000 NetworkManager[403]: <info>  [1760190978.9909] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:19 IQ138000 wb-watchdog[18116]: [INFO] Interval #460 started. Waiting up to 60 seconds for error...
Oct 11 13:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:56:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:56:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:56:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:56:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:56:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:56:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:56:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:56:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:56:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:56:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:56:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:56:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:56:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:56:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:56:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:56:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:56:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:56:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:56:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:56:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:56:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:56:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:56:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:56:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:56:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:56:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:56:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:56:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:56:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:56:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:56:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:56:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:56:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:56:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:56:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:56:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:56:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:56:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4628 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:56:44 IQ138000 NetworkManager[403]: <warn>  [1760191004.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:56:44 IQ138000 NetworkManager[403]: <info>  [1760191004.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:56:44 IQ138000 NetworkManager[403]: <warn>  [1760191004.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:56:44 IQ138000 NetworkManager[403]: <info>  [1760191004.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:56:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/326
Oct 11 13:56:44 IQ138000 NetworkManager[403]: <info>  [1760191004.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:56:44 IQ138000 NetworkManager[403]: <info>  [1760191004.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:56:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:56:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:56:49 IQ138000 NetworkManager[403]: <info>  [1760191009.6627] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L2, row count 7183, limit 7042
Oct 11 13:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:57:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:57:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:57:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:57:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:57:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:57:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:57:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:57:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:57:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:57:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:57:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:57:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:57:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:57:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:57:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:57:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:57:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:57:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:57:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:57:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:57:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:57:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:57:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:57:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:57:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:57:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:57:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:57:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:57:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:57:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:57:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:57:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:57:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:57:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:57:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:57:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:57:19 IQ138000 wb-watchdog[18729]: [INFO] Interval #461 started. Waiting up to 60 seconds for error...
Oct 11 13:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:57:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:57:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:57:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:57:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:57:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:57:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:57:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:57:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:57:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:57:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:57:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:57:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:57:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:57:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:57:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:57:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:57:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:57:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:57:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:57:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:57:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:57:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:57:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:57:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:57:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:57:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:57:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:57:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:57:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:57:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:57:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:57:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:57:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:57:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:57:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:57:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:57:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:57:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:57:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:57:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7653] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7659] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7670] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7747] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7773] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7775] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7895] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7933] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7952] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7955] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7957] Config: added 'scan_ssid' value '1'
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7957] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7959] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.7960] Config: added 'psk' value '<hidden>'
Oct 11 13:57:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/327
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.8697] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:57:44 IQ138000 NetworkManager[403]: <info>  [1760191064.8699] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:57:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:57:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:58:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:58:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:58:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:58:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:58:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:58:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:58:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:58:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:58:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:58:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:58:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:58:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:58:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:58:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:58:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:58:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:58:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:58:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:58:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:58:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:58:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:58:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:58:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:58:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:58:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:58:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:58:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:58:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:58:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:58:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:58:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:58:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:58:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:58:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:58:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:58:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:58:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:10 IQ138000 NetworkManager[403]: <warn>  [1760191090.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:58:10 IQ138000 NetworkManager[403]: <info>  [1760191090.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:58:10 IQ138000 NetworkManager[403]: <warn>  [1760191090.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:58:10 IQ138000 NetworkManager[403]: <info>  [1760191090.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:58:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/327
Oct 11 13:58:10 IQ138000 NetworkManager[403]: <info>  [1760191090.0711] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:58:10 IQ138000 NetworkManager[403]: <info>  [1760191090.0713] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 13:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:16 IQ138000 NetworkManager[403]: <info>  [1760191096.4950] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:58:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:19 IQ138000 wb-watchdog[19425]: [INFO] Interval #462 started. Waiting up to 60 seconds for error...
Oct 11 13:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:58:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:58:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:58:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:58:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:58:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:58:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:58:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:58:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:58:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:58:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:58:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:58:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:58:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:58:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:58:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:58:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:58:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:58:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:58:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:58:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:58:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:58:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:58:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:58:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:58:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:58:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:58:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:58:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:58:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:58:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:58:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:58:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:58:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:58:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:58:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:58:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:58:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 13:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:58:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 13:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:58:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:58:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:58:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:59:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:59:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:59:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:59:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:59:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:59:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:59:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:59:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:59:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:59:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:59:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:59:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:59:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:59:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:59:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:59:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:59:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:59:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:59:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:59:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:59:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:59:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:59:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:59:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:59:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:59:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:59:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:59:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:59:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:59:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:59:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:59:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:59:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:59:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:59:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:59:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:59:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:59:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:59:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 13:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4275] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4295] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4306] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4454] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4477] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4479] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4653] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4673] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4690] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4694] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4695] Config: added 'scan_ssid' value '1'
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4696] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4697] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.4699] Config: added 'psk' value '<hidden>'
Oct 11 13:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:59:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/328
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.5603] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 13:59:11 IQ138000 NetworkManager[403]: <info>  [1760191151.5605] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 13:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 13:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:19 IQ138000 wb-watchdog[20042]: [INFO] Interval #463 started. Waiting up to 60 seconds for error...
Oct 11 13:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 13:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 13:59:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 13:59:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 13:59:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 13:59:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 13:59:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 13:59:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 13:59:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 13:59:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 13:59:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 13:59:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 13:59:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 13:59:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 13:59:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 13:59:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 13:59:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 13:59:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 13:59:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 13:59:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 13:59:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 13:59:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 13:59:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:59:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 13:59:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 13:59:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 13:59:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:59:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 13:59:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 13:59:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 13:59:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 13:59:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 13:59:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 13:59:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 13:59:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 13:59:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 13:59:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 13:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:37 IQ138000 NetworkManager[403]: <warn>  [1760191177.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 13:59:37 IQ138000 NetworkManager[403]: <info>  [1760191177.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 13:59:37 IQ138000 NetworkManager[403]: <warn>  [1760191177.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 13:59:37 IQ138000 NetworkManager[403]: <info>  [1760191177.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 13:59:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/328
Oct 11 13:59:37 IQ138000 NetworkManager[403]: <info>  [1760191177.0711] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 13:59:37 IQ138000 NetworkManager[403]: <info>  [1760191177.0713] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 13:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 13:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 13:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 13:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 13:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:43 IQ138000 NetworkManager[403]: <info>  [1760191183.1873] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 13:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 13:59:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 13:59:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 13:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 13:59:56 IQ138000 npm[3801]: [2025-10-11 13:59:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.42,"last_seen":1760191196794,"linkquality":116,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 13:59:56 IQ138000 npm[3801]: [2025-10-11 13:59:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.35,"last_seen":1760191196807,"linkquality":116,"power_outage_count":48745,"temperature":27.1,"voltage":3025}'
Oct 11 13:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 13:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 13:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:00:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:00:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:00:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:00:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:00:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:00:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:00:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:00:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:00:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:00:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:00:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:00:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:00:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:00:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:00:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:00:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:00:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:00:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:00:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:00:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:00:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:00:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:00:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:00:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:00:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:00:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:00:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:00:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:00:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:00:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:00:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:00:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:00:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:00:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:00:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:00:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:00:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:00:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:00:19 IQ138000 wb-watchdog[20749]: [INFO] Interval #464 started. Waiting up to 60 seconds for error...
Oct 11 14:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:00:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:00:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:00:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:00:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:00:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:00:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:00:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:00:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:00:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:00:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:00:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:00:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:00:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:00:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:00:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:00:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:00:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:00:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:00:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:00:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:00:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:00:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:00:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:00:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:00:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:00:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:00:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:00:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:00:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:00:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:00:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:00:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:00:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:00:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:00:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:00:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:00:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.1924] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.1948] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.1955] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2063] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2096] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2106] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2213] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2236] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2253] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2256] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2258] Config: added 'scan_ssid' value '1'
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2259] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2260] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.2261] Config: added 'psk' value '<hidden>'
Oct 11 14:00:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/329
Oct 11 14:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.3026] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:00:38 IQ138000 NetworkManager[403]: <info>  [1760191238.3029] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9494 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:00:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:00:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:00:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:00:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:03 IQ138000 NetworkManager[403]: <warn>  [1760191263.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:01:03 IQ138000 NetworkManager[403]: <info>  [1760191263.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:01:03 IQ138000 NetworkManager[403]: <warn>  [1760191263.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:01:03 IQ138000 NetworkManager[403]: <info>  [1760191263.0284] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:01:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/329
Oct 11 14:01:03 IQ138000 NetworkManager[403]: <info>  [1760191263.0690] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:01:03 IQ138000 NetworkManager[403]: <info>  [1760191263.0692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:01:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:01:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:01:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:01:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:01:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:01:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:01:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:01:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:01:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:01:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:01:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:01:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:01:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:01:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:01:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:01:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:01:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:01:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:01:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:01:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:01:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:01:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:01:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:01:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:01:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:01:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:01:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:01:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:01:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:01:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:01:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:01:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:01:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:01:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:01:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:01:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:01:08 IQ138000 NetworkManager[403]: <info>  [1760191268.9510] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:01:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:01:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:15 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:01:19 IQ138000 wb-watchdog[21364]: [INFO] Interval #465 started. Waiting up to 60 seconds for error...
Oct 11 14:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:01:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:01:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:01:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:01:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:01:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:01:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:01:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:01:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:01:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:01:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:01:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:01:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:01:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:01:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:01:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:01:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:01:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:01:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:01:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:01:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:01:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:01:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:01:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:01:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:01:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:01:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:01:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:01:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:01:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:01:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:01:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:01:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:01:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:01:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:01:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:01:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:01:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:01:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:01:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:01:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:01:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:01:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L2, row count 7183, limit 7042
Oct 11 14:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:01:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:01:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:02:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9347] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9358] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9379] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9445] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9469] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9471] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9554] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9572] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9593] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9597] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9599] Config: added 'scan_ssid' value '1'
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9600] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9601] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:02:03 IQ138000 NetworkManager[403]: <info>  [1760191323.9602] Config: added 'psk' value '<hidden>'
Oct 11 14:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/330
Oct 11 14:02:04 IQ138000 NetworkManager[403]: <info>  [1760191324.0279] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:02:04 IQ138000 NetworkManager[403]: <info>  [1760191324.0281] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:02:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:02:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:02:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:02:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:02:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:02:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:02:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:02:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:02:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:02:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:02:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:02:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:02:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:02:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:02:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:02:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:02:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:02:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:02:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:02:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:02:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:02:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:02:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:02:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:02:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:02:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:02:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:02:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:02:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:02:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:02:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:02:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:02:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:02:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:02:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:02:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:02:19 IQ138000 wb-watchdog[22067]: [INFO] Interval #466 started. Waiting up to 60 seconds for error...
Oct 11 14:02:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:02:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:29 IQ138000 NetworkManager[403]: <warn>  [1760191349.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:02:29 IQ138000 NetworkManager[403]: <info>  [1760191349.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:02:29 IQ138000 NetworkManager[403]: <warn>  [1760191349.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:02:29 IQ138000 NetworkManager[403]: <info>  [1760191349.0297] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:02:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/330
Oct 11 14:02:29 IQ138000 NetworkManager[403]: <info>  [1760191349.0681] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:02:29 IQ138000 NetworkManager[403]: <info>  [1760191349.0683] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:02:34 IQ138000 NetworkManager[403]: <info>  [1760191354.6425] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:02:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:02:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:02:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:02:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:02:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:02:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:02:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:02:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:02:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:02:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:02:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:02:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:02:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:02:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:02:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:02:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:02:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:02:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:02:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:02:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:02:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:02:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:02:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:02:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:02:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:02:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:02:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:02:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:02:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:02:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:02:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:02:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:02:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:02:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:02:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:02:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:02:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:02:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:02:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:02:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:02 IQ138000 npm[3801]: [2025-10-11 14:03:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.35,"last_seen":1760191382708,"linkquality":105,"power_outage_count":48745,"temperature":27.22,"voltage":3025}'
Oct 11 14:03:02 IQ138000 npm[3801]: [2025-10-11 14:03:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.47,"last_seen":1760191382720,"linkquality":102,"power_outage_count":48745,"temperature":27.22,"voltage":3025}'
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:03:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:03:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:03:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:03:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:03:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:03:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:03:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:03:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:03:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:03:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:03:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:03:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:03:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:03:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:03:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:03:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:03:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:03:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:03:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:03:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:03:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:03:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:03:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:03:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:03:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:03:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:03:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:03:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:03:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:03:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:03:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:03:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:03:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:03:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:03:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:03:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:03:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:03:19 IQ138000 wb-watchdog[22662]: [INFO] Interval #467 started. Waiting up to 60 seconds for error...
Oct 11 14:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:03:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.6796] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.6805] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.6811] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.6927] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.6953] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.6954] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7063] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7092] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7110] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7113] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7114] Config: added 'scan_ssid' value '1'
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7115] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7116] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7117] Config: added 'psk' value '<hidden>'
Oct 11 14:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/331
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7882] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:03:29 IQ138000 NetworkManager[403]: <info>  [1760191409.7885] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:03:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:03:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:03:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:03:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:03:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:03:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:03:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:03:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:03:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:03:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:03:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:03:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:03:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:03:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:03:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:03:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:03:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:03:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:03:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:03:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:03:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:03:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:03:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:03:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:03:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:03:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:03:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:03:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:03:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:03:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:03:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:03:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:03:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:03:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:03:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:03:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:03:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:03:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:03:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:03:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:55 IQ138000 NetworkManager[403]: <warn>  [1760191435.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:03:55 IQ138000 NetworkManager[403]: <info>  [1760191435.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:03:55 IQ138000 NetworkManager[403]: <warn>  [1760191435.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:03:55 IQ138000 NetworkManager[403]: <info>  [1760191435.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:03:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/331
Oct 11 14:03:55 IQ138000 NetworkManager[403]: <info>  [1760191435.0664] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:03:55 IQ138000 NetworkManager[403]: <info>  [1760191435.0666] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:01 IQ138000 NetworkManager[403]: <info>  [1760191441.3730] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:04:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:04:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:04:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:04:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:04:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:04:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:04:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:04:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:04:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:04:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:04:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:04:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:04:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:04:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:04:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:04:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:04:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:04:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:04:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:04:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:04:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:04:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:04:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:04:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:04:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:04:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:04:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:04:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:04:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:04:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:04:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:04:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:04:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:04:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:04:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:04:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:19 IQ138000 wb-watchdog[23373]: [INFO] Interval #468 started. Waiting up to 60 seconds for error...
Oct 11 14:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:04:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:04:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:04:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:04:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:04:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:04:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:04:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:04:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:04:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:04:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:04:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:04:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:04:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:04:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:04:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:04:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:04:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:04:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:04:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:04:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:04:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:04:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:04:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:04:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:04:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:04:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:04:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:04:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:04:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:04:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:04:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:04:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:04:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:04:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:04:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:04:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3241] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3259] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3281] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3387] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3413] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3414] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3535] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3561] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3593] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3596] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3599] Config: added 'scan_ssid' value '1'
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3600] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3602] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.3602] Config: added 'psk' value '<hidden>'
Oct 11 14:04:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/332
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.4536] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:04:56 IQ138000 NetworkManager[403]: <info>  [1760191496.4538] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:01 IQ138000 CRON[23757]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:05:01 IQ138000 CRON[23761]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 14:05:01 IQ138000 CRON[23757]: pam_unix(cron:session): session closed for user root
Oct 11 14:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:05:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:05:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:05:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:05:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:05:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:05:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:05:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:05:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:05:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:05:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:05:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:05:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:05:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:05:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:05:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:05:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:05:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:05:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:05:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:05:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:05:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:05:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:05:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:05:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:05:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:05:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:05:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:05:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:05:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:05:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:05:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:05:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:05:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:05:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:05:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:05:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:05:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:05:15 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 14:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:05:19 IQ138000 wb-watchdog[24011]: [INFO] Interval #469 started. Waiting up to 60 seconds for error...
Oct 11 14:05:22 IQ138000 NetworkManager[403]: <warn>  [1760191522.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:05:22 IQ138000 NetworkManager[403]: <info>  [1760191522.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:05:22 IQ138000 NetworkManager[403]: <warn>  [1760191522.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:05:22 IQ138000 NetworkManager[403]: <info>  [1760191522.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:05:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/332
Oct 11 14:05:22 IQ138000 NetworkManager[403]: <info>  [1760191522.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:05:22 IQ138000 NetworkManager[403]: <info>  [1760191522.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:05:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:28 IQ138000 NetworkManager[403]: <info>  [1760191528.0826] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:05:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:33 IQ138000 npm[3801]: [2025-10-11 14:05:33] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.47,"last_seen":1760191533466,"linkquality":98,"power_outage_count":48745,"temperature":27.16,"voltage":3025}'
Oct 11 14:05:33 IQ138000 npm[3801]: [2025-10-11 14:05:33] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.32,"last_seen":1760191533481,"linkquality":98,"power_outage_count":48745,"temperature":27.16,"voltage":3025}'
Oct 11 14:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:05:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:05:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:05:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:05:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:05:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:05:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:05:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:05:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:05:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:05:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:05:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:05:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:05:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:05:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:05:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:05:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:05:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:05:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:05:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:05:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:05:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:05:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:05:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:05:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:05:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:05:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:05:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:05:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:05:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:05:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:05:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:05:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:05:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:05:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:05:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:05:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:05:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:05:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:05:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:06:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:06:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:06:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:06:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:06:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:06:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:06:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:06:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:06:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:06:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:06:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:06:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:06:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:06:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:06:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:06:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:06:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:06:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:06:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:06:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:06:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:06:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:06:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:06:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:06:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:06:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:06:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:06:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:06:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:06:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:06:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:06:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:06:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:06:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:06:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:06:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:06:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:06:19 IQ138000 wb-watchdog[24699]: [INFO] Interval #470 started. Waiting up to 60 seconds for error...
Oct 11 14:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:06:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:06:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3280] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3296] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3312] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3364] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3381] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3383] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3478] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3496] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3515] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3519] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3521] Config: added 'scan_ssid' value '1'
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3522] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3523] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.3524] Config: added 'psk' value '<hidden>'
Oct 11 14:06:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/333
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.4348] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:06:23 IQ138000 NetworkManager[403]: <info>  [1760191583.4351] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:06:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:06:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:06:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:06:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:06:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:06:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:06:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:06:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:06:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:06:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:06:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:06:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:06:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:06:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:06:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:06:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:06:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:06:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:06:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:06:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:06:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:06:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:06:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:06:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:06:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:06:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:06:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:06:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:06:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:06:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:06:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:06:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:06:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:06:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:06:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:06:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:06:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:06:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:06:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:06:49 IQ138000 NetworkManager[403]: <warn>  [1760191609.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:06:49 IQ138000 NetworkManager[403]: <info>  [1760191609.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:06:49 IQ138000 NetworkManager[403]: <warn>  [1760191609.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:06:49 IQ138000 NetworkManager[403]: <info>  [1760191609.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:06:49 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:06:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/333
Oct 11 14:06:49 IQ138000 NetworkManager[403]: <info>  [1760191609.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:06:49 IQ138000 NetworkManager[403]: <info>  [1760191609.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:49 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:55 IQ138000 NetworkManager[403]: <info>  [1760191615.1352] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:06:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L1, row count 7183, limit 7042
Oct 11 14:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:07:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:07:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:07:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:07:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:07:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:07:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:07:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:07:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:07:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:07:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:07:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:07:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:07:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:07:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:07:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:07:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:07:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:07:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:07:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:07:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:07:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:07:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:07:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:07:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:07:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:07:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:07:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:07:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:07:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:07:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:07:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:07:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:07:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:07:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:07:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:07:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:07:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8344 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:19 IQ138000 wb-watchdog[25329]: [INFO] Interval #471 started. Waiting up to 60 seconds for error...
Oct 11 14:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:07:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:07:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:07:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:07:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:07:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:07:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:07:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:07:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:07:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:07:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:07:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:07:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:07:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:07:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:07:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:07:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:07:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:07:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:07:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:07:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:07:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:07:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:07:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:07:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:07:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:07:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:07:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:07:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:07:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:07:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:07:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:07:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:07:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:07:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:07:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:07:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:07:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:07:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.1986] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.1991] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2011] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2111] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2146] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2149] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2249] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2269] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2289] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2292] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2293] Config: added 'scan_ssid' value '1'
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2294] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2297] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:07:50 IQ138000 NetworkManager[403]: <info>  [1760191670.2299] Config: added 'psk' value '<hidden>'
Oct 11 14:07:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/334
Oct 11 14:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:07:53 IQ138000 NetworkManager[403]: <info>  [1760191673.3100] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:07:53 IQ138000 NetworkManager[403]: <info>  [1760191673.3103] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:07:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:07:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:01 IQ138000 CRON[25787]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:08:01 IQ138000 CRON[25791]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 14:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:03 IQ138000 sSMTP[25811]: Unable to locate mail
Oct 11 14:08:03 IQ138000 cron[25811]: sendmail: Cannot open mail:25
Oct 11 14:08:03 IQ138000 sSMTP[25811]: Cannot open mail:25
Oct 11 14:08:03 IQ138000 CRON[25787]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 14:08:03 IQ138000 CRON[25787]: pam_unix(cron:session): session closed for user root
Oct 11 14:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:08:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:08:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:08:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:08:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:08:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:08:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:08:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:08:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:08:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:08:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:08:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:08:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:08:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:08:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:08:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:08:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:08:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:08:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:08:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:08:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:08:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:08:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:08:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:08:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:08:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:08:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:08:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:08:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:08:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:08:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:08:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:08:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:08:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:08:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:08:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:08:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:08:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:08:09 IQ138000 npm[3801]: [2025-10-11 14:08:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.97,"last_seen":1760191689701,"linkquality":29,"power_outage_count":35250,"temperature":24.04,"voltage":3075}'
Oct 11 14:08:09 IQ138000 npm[3801]: [2025-10-11 14:08:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.16,"last_seen":1760191689709,"linkquality":32,"power_outage_count":35250,"temperature":24.04,"voltage":3075}'
Oct 11 14:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:15 IQ138000 NetworkManager[403]: <warn>  [1760191695.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:08:15 IQ138000 NetworkManager[403]: <info>  [1760191695.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:08:15 IQ138000 NetworkManager[403]: <warn>  [1760191695.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:08:15 IQ138000 NetworkManager[403]: <info>  [1760191695.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:08:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/334
Oct 11 14:08:15 IQ138000 NetworkManager[403]: <info>  [1760191695.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:08:15 IQ138000 NetworkManager[403]: <info>  [1760191695.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5126 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-watchdog[26025]: [INFO] Interval #472 started. Waiting up to 60 seconds for error...
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:20 IQ138000 NetworkManager[403]: <info>  [1760191700.9513] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:08:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:08:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:08:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:08:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:08:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:08:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:08:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:08:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:08:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:08:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:08:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:08:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:08:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:08:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:08:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:08:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:08:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:08:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:08:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:08:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:08:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:08:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:08:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:08:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:08:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:08:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:08:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:08:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:08:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:08:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:08:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:08:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:08:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:08:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:08:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:08:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:08:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:08:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:08:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:08:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 18 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:08:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:09:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:09:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:09:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:09:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:09:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:09:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:09:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:09:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:09:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:09:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:09:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:09:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:09:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:09:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:09:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:09:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:09:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:09:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:09:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:09:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:09:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:09:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:09:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:09:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:09:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:09:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:09:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:09:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:09:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:09:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:09:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:09:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:09:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:09:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:09:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:09:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8637] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8642] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8649] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8712] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8740] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8844] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8870] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8900] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8905] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8906] Config: added 'scan_ssid' value '1'
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8907] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8908] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.8909] Config: added 'psk' value '<hidden>'
Oct 11 14:09:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/335
Oct 11 14:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.9634] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:09:15 IQ138000 NetworkManager[403]: <info>  [1760191755.9638] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:19 IQ138000 wb-watchdog[26637]: [INFO] Interval #473 started. Waiting up to 60 seconds for error...
Oct 11 14:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:09:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:09:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L1, row count 7183, limit 7042
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:09:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:09:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:09:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:09:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:09:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:09:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:09:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:09:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:09:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:09:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:09:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:09:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:09:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:09:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:09:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:09:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:09:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:09:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:09:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:09:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:09:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:09:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:09:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:09:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:09:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:09:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:09:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:09:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:09:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:09:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:09:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:09:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:09:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:09:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:09:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:09:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:41 IQ138000 NetworkManager[403]: <warn>  [1760191781.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:09:41 IQ138000 NetworkManager[403]: <info>  [1760191781.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:09:41 IQ138000 NetworkManager[403]: <warn>  [1760191781.0276] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:09:41 IQ138000 NetworkManager[403]: <info>  [1760191781.0287] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:09:41 IQ138000 NetworkManager[403]: <info>  [1760191781.0289] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:09:41 IQ138000 NetworkManager[403]: <info>  [1760191781.0333] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:09:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/335
Oct 11 14:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:09:47 IQ138000 NetworkManager[403]: <info>  [1760191787.6354] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:09:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:09:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:04 IQ138000 npm[3801]: [2025-10-11 14:10:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.32,"last_seen":1760191804677,"linkquality":94,"power_outage_count":48745,"temperature":27.16,"voltage":3025}'
Oct 11 14:10:04 IQ138000 npm[3801]: [2025-10-11 14:10:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.42,"last_seen":1760191804692,"linkquality":102,"power_outage_count":48745,"temperature":27.16,"voltage":3025}'
Oct 11 14:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:10:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:10:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:10:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:10:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:10:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:10:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:10:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:10:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:10:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:10:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:10:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:10:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:10:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:10:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:10:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:10:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:10:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:10:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:10:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:10:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:10:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:10:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:10:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:10:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:10:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:10:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:10:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:10:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:10:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:10:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:10:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:10:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:10:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:10:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:10:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:10:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:10:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:19 IQ138000 wb-watchdog[27354]: [INFO] Interval #474 started. Waiting up to 60 seconds for error...
Oct 11 14:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:10:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:10:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:10:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:10:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:10:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:10:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:10:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:10:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:10:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:10:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:10:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:10:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:10:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:10:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:10:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:10:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:10:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:10:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:10:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:10:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:10:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:10:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:10:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:10:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:10:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:10:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:10:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:10:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:10:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:10:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:10:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:10:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:10:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:10:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:10:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:10:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:10:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:10:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:10:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6105] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6119] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6127] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6236] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6254] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6256] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6362] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6403] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6422] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6426] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6427] Config: added 'scan_ssid' value '1'
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6428] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6429] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.6430] Config: added 'psk' value '<hidden>'
Oct 11 14:10:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/336
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.7122] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:10:42 IQ138000 NetworkManager[403]: <info>  [1760191842.7124] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:10:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:10:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:10:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:08 IQ138000 NetworkManager[403]: <warn>  [1760191868.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:11:08 IQ138000 NetworkManager[403]: <info>  [1760191868.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:11:08 IQ138000 NetworkManager[403]: <warn>  [1760191868.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:11:08 IQ138000 NetworkManager[403]: <info>  [1760191868.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:11:08 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:11:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/336
Oct 11 14:11:08 IQ138000 NetworkManager[403]: <info>  [1760191868.0639] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:11:08 IQ138000 NetworkManager[403]: <info>  [1760191868.0641] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:08 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:11:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:11:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:11:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:11:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:11:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:11:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:11:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:11:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:11:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:11:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:11:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:11:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:11:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:11:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:11:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:11:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:11:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:11:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:11:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:11:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:11:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:11:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:11:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:11:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:11:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:11:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:11:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:11:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:11:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:11:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:11:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:11:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:11:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:11:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:11:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:11:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:11:14 IQ138000 NetworkManager[403]: <info>  [1760191874.3642] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:11:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:11:19 IQ138000 wb-watchdog[27955]: [INFO] Interval #475 started. Waiting up to 60 seconds for error...
Oct 11 14:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:11:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:11:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel 0x00158d00033b5dc6/humidity, row count 7183, limit 7042
Oct 11 14:11:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L1, row count 7183, limit 7042
Oct 11 14:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:11:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:11:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:11:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:11:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:11:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:11:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:11:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:11:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:11:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:11:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:11:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:11:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:11:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:11:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:11:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:11:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:11:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:11:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:11:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:11:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:11:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:11:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:11:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:11:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:11:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:11:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:11:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:11:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:11:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:11:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:11:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:11:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:11:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:11:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:11:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:11:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:11:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:11:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 14:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:11:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:11:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:12:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3557] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3561] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3567] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3654] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3676] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3679] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3820] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3872] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3912] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3915] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3917] Config: added 'scan_ssid' value '1'
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3917] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3919] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:12:09 IQ138000 NetworkManager[403]: <info>  [1760191929.3920] Config: added 'psk' value '<hidden>'
Oct 11 14:12:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/337
Oct 11 14:12:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:12:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:12:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:12:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:12:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:12:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:12:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:12:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:12:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:12:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:12:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:12:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:12:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:12:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:12:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:12:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:12:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:12:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:12:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:12:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:12:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:12:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:12:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:12:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:12:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:12:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:12:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:12:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:12:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:12:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:12:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:12:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:12:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:12:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:12:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:12:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:12:11 IQ138000 NetworkManager[403]: <info>  [1760191931.4763] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:12:11 IQ138000 NetworkManager[403]: <info>  [1760191931.4800] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:12:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:20 IQ138000 wb-watchdog[28668]: [INFO] Interval #476 started. Waiting up to 60 seconds for error...
Oct 11 14:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:35 IQ138000 NetworkManager[403]: <warn>  [1760191955.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:12:35 IQ138000 NetworkManager[403]: <info>  [1760191955.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:12:35 IQ138000 NetworkManager[403]: <warn>  [1760191955.0268] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:12:35 IQ138000 NetworkManager[403]: <info>  [1760191955.0284] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:12:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/337
Oct 11 14:12:35 IQ138000 NetworkManager[403]: <info>  [1760191955.0714] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:12:35 IQ138000 NetworkManager[403]: <info>  [1760191955.0716] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:12:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:12:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:12:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:12:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:12:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:12:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:12:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:12:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:12:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:12:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:12:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:12:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:12:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:12:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:12:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:12:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:12:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:12:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:12:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:12:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:12:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:12:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:12:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:12:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:12:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:12:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:12:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:12:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:12:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:12:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:12:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:12:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:12:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:12:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:12:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:12:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:12:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:12:41 IQ138000 NetworkManager[403]: <info>  [1760191961.0700] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:12:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:13:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:13:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:13:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:13:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:13:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:13:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:13:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:13:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:13:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:13:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:13:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:13:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:13:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:13:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:13:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:13:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:13:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:13:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:13:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:13:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:13:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:13:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:13:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:13:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:13:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:13:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:13:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:13:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:13:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:13:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:13:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:13:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:13:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:13:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:13:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:13:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:13:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:13:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:20 IQ138000 wb-watchdog[29278]: [INFO] Interval #477 started. Waiting up to 60 seconds for error...
Oct 11 14:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:13:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:13:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0674] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0679] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0685] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0742] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0780] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0797] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0908] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0927] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0943] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0946] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0947] Config: added 'scan_ssid' value '1'
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0948] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0949] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.0950] Config: added 'psk' value '<hidden>'
Oct 11 14:13:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/338
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.1704] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:13:36 IQ138000 NetworkManager[403]: <info>  [1760192016.1724] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:13:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:13:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:13:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:13:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:13:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:13:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:13:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:13:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:13:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:13:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:13:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:13:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:13:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:13:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:13:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:13:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:13:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:13:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:13:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:13:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:13:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:13:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:13:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:13:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:13:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:13:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:13:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:13:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:13:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:13:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:13:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:13:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:13:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:13:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:13:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:13:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:13:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:13:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:45 IQ138000 npm[3801]: [2025-10-11 14:13:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.42,"last_seen":1760192025709,"linkquality":94,"power_outage_count":48745,"temperature":26.98,"voltage":3025}'
Oct 11 14:13:45 IQ138000 npm[3801]: [2025-10-11 14:13:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.23,"last_seen":1760192025721,"linkquality":94,"power_outage_count":48745,"temperature":26.98,"voltage":3025}'
Oct 11 14:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:13:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:13:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:14:01 IQ138000 NetworkManager[403]: <warn>  [1760192041.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:14:01 IQ138000 NetworkManager[403]: <info>  [1760192041.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:14:01 IQ138000 NetworkManager[403]: <warn>  [1760192041.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:14:01 IQ138000 NetworkManager[403]: <info>  [1760192041.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:14:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/338
Oct 11 14:14:01 IQ138000 NetworkManager[403]: <info>  [1760192041.0712] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:14:01 IQ138000 NetworkManager[403]: <info>  [1760192041.0714] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:14:06 IQ138000 NetworkManager[403]: <info>  [1760192046.7808] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:14:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:14:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:14:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:14:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:14:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:14:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:14:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:14:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:14:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:14:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:14:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:14:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:14:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:14:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:14:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:14:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:14:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:14:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:14:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:14:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:14:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:14:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:14:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:14:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:14:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:14:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:14:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:14:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:14:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:14:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:14:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:14:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:14:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:14:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:14:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:14:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:20 IQ138000 wb-watchdog[29976]: [INFO] Interval #478 started. Waiting up to 60 seconds for error...
Oct 11 14:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:14:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:14:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:14:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:14:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:14:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:14:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:14:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:14:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:14:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:14:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:14:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:14:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:14:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:14:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:14:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:14:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:14:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:14:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:14:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:14:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:14:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:14:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:14:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:14:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:14:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:14:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:14:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:14:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:14:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:14:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:14:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:14:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:14:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:14:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:14:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:14:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:14:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:14:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:15:01 IQ138000 CRON[30344]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:15:01 IQ138000 CRON[30354]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 14:15:01 IQ138000 CRON[30344]: pam_unix(cron:session): session closed for user root
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9414] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9419] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9424] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9480] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9501] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9503] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9593] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9613] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9628] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9631] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9632] Config: added 'scan_ssid' value '1'
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9633] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9635] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:15:01 IQ138000 NetworkManager[403]: <info>  [1760192101.9636] Config: added 'psk' value '<hidden>'
Oct 11 14:15:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/339
Oct 11 14:15:02 IQ138000 NetworkManager[403]: <info>  [1760192102.0348] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:15:02 IQ138000 NetworkManager[403]: <info>  [1760192102.0350] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:15:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:15:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:15:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:15:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:15:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:15:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:15:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:15:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:15:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:15:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:15:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:15:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:15:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:15:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:15:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:15:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:15:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:15:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:15:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:15:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:15:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:15:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:15:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:15:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:15:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:15:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:15:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:15:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:15:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:15:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:15:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:15:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:15:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:15:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:15:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:15:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:15:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:15:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:15:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:15:20 IQ138000 wb-watchdog[30615]: [INFO] Interval #479 started. Waiting up to 60 seconds for error...
Oct 11 14:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:27 IQ138000 NetworkManager[403]: <warn>  [1760192127.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:15:27 IQ138000 NetworkManager[403]: <info>  [1760192127.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:15:27 IQ138000 NetworkManager[403]: <warn>  [1760192127.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:15:27 IQ138000 NetworkManager[403]: <info>  [1760192127.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:15:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/339
Oct 11 14:15:27 IQ138000 NetworkManager[403]: <info>  [1760192127.0669] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:15:27 IQ138000 NetworkManager[403]: <info>  [1760192127.0672] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:32 IQ138000 NetworkManager[403]: <info>  [1760192132.6907] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:15:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:15:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:15:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:15:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:15:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:15:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:15:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:15:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:15:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:15:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:15:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:15:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:15:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:15:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:15:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:15:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:15:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:15:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:15:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:15:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:15:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:15:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:15:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:15:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:15:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:15:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:15:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:15:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:15:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:15:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:15:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:15:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:15:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:15:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:15:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:15:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:15:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:15:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:16:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:16:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:16:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:16:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:16:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:16:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:16:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:16:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:16:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:16:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:16:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:16:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:16:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:16:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:16:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:16:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:16:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:16:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:16:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:16:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:16:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:16:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:16:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:16:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:16:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:16:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:16:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:16:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:16:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:16:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:16:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:16:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:16:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:16:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:16:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:16:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:20 IQ138000 wb-watchdog[31305]: [INFO] Interval #480 started. Waiting up to 60 seconds for error...
Oct 11 14:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:16:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8807] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8811] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8816] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8863] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8888] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8890] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8974] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.8995] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9013] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9017] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9018] Config: added 'scan_ssid' value '1'
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9019] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9020] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9021] Config: added 'psk' value '<hidden>'
Oct 11 14:16:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/340
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9746] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:16:27 IQ138000 NetworkManager[403]: <info>  [1760192187.9749] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:36 IQ138000 npm[3801]: [2025-10-11 14:16:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.23,"last_seen":1760192196547,"linkquality":83,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 14:16:36 IQ138000 npm[3801]: [2025-10-11 14:16:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.25,"last_seen":1760192196561,"linkquality":83,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 14:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:16:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:16:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:16:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:16:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:16:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:16:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:16:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:16:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:16:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:16:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:16:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:16:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:16:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:16:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:16:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:16:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:16:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:16:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:16:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:16:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:16:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:16:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:16:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:16:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:16:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:16:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:16:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:16:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:16:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:16:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:16:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:16:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:16:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:16:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:16:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:16:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:16:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:16:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:16:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:53 IQ138000 NetworkManager[403]: <warn>  [1760192213.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:16:53 IQ138000 NetworkManager[403]: <info>  [1760192213.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:16:53 IQ138000 NetworkManager[403]: <warn>  [1760192213.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:16:53 IQ138000 NetworkManager[403]: <info>  [1760192213.0300] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:16:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/340
Oct 11 14:16:53 IQ138000 NetworkManager[403]: <info>  [1760192213.0742] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:16:53 IQ138000 NetworkManager[403]: <info>  [1760192213.0744] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:16:58 IQ138000 NetworkManager[403]: <info>  [1760192218.6554] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:16:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:16:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:01 IQ138000 CRON[31689]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:17:01 IQ138000 CRON[31693]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 14:17:01 IQ138000 CRON[31689]: pam_unix(cron:session): session closed for user root
Oct 11 14:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:17:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:17:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:17:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:17:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:17:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:17:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:17:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:17:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:17:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:17:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:17:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:17:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:17:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:17:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:17:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:17:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:17:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:17:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:17:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:17:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:17:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:17:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:17:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:17:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:17:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:17:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:17:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:17:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:17:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:17:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:17:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:17:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:17:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:17:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:17:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:17:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:20 IQ138000 wb-watchdog[31923]: [INFO] Interval #481 started. Waiting up to 60 seconds for error...
Oct 11 14:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:17:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L2, row count 7183, limit 7042
Oct 11 14:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:17:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:17:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:17:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:17:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:17:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:17:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:17:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:17:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:17:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:17:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:17:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:17:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:17:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:17:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:17:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:17:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:17:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:17:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:17:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:17:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:17:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:17:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:17:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:17:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:17:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:17:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:17:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:17:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:17:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:17:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:17:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:17:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:17:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:17:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:17:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:17:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:17:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6671] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6736] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6761] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6832] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6877] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6879] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6970] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.6996] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7022] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7027] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7028] Config: added 'scan_ssid' value '1'
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7029] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7031] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7032] Config: added 'psk' value '<hidden>'
Oct 11 14:17:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/341
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7743] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:17:53 IQ138000 NetworkManager[403]: <info>  [1760192273.7745] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:17:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:17:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:18:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:18:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:18:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:18:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:18:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:18:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:18:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:18:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:18:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:18:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:18:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:18:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:18:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:18:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:18:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:18:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:18:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:18:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:18:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:18:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:18:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:18:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:18:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:18:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:18:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:18:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:18:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:18:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:18:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:18:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:18:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:18:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:18:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:18:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:18:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:17 IQ138000 npm[3801]: [2025-10-11 14:18:17] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.88,"last_seen":1760192297163,"linkquality":91,"power_outage_count":48745,"temperature":27.01,"voltage":3025}'
Oct 11 14:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:19 IQ138000 NetworkManager[403]: <warn>  [1760192299.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:18:19 IQ138000 NetworkManager[403]: <info>  [1760192299.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:18:19 IQ138000 NetworkManager[403]: <warn>  [1760192299.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:18:19 IQ138000 NetworkManager[403]: <info>  [1760192299.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:18:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/341
Oct 11 14:18:19 IQ138000 NetworkManager[403]: <info>  [1760192299.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:18:19 IQ138000 NetworkManager[403]: <info>  [1760192299.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:18:20 IQ138000 wb-watchdog[32626]: [INFO] Interval #482 started. Waiting up to 60 seconds for error...
Oct 11 14:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:18:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:18:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:25 IQ138000 NetworkManager[403]: <info>  [1760192305.4001] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:18:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:18:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:18:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:18:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:18:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:18:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:18:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:18:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:18:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:18:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:18:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:18:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:18:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:18:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:18:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:18:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:18:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:18:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:18:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:18:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:18:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:18:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:18:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:18:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:18:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:18:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:18:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:18:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:18:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:18:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:18:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:18:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:18:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:18:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:18:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:18:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:18:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:18:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:18:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:18:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:18:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:18:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:18:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L3, row count 7183, limit 7042
Oct 11 14:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:19:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:19:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:19:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:19:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:19:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:19:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:19:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:19:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:19:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:19:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:19:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:19:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:19:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:19:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:19:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:19:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:19:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:19:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:19:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:19:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:19:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:19:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:19:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:19:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:19:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:19:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:19:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:19:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:19:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:19:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:19:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:19:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:19:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:19:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:19:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.3937] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.3942] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.3949] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4018] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4062] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4064] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4315] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4400] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4437] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4440] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4441] Config: added 'scan_ssid' value '1'
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4442] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4443] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.4444] Config: added 'psk' value '<hidden>'
Oct 11 14:19:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/342
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.5309] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:19:20 IQ138000 NetworkManager[403]: <info>  [1760192360.5311] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:19:20 IQ138000 wb-watchdog[801]: [INFO] Interval #483 started. Waiting up to 60 seconds for error...
Oct 11 14:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:19:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:19:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:19:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:19:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:19:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:19:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:19:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:19:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:19:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:19:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:19:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:19:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:19:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:19:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:19:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:19:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:19:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:19:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:19:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:19:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:19:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:19:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:19:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:19:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:19:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:19:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:19:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:19:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:19:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:19:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:19:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:19:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:19:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:19:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:19:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:19:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:19:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:19:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:19:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:19:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:19:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:19:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:19:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:19:46 IQ138000 NetworkManager[403]: <warn>  [1760192386.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:19:46 IQ138000 NetworkManager[403]: <info>  [1760192386.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:19:46 IQ138000 NetworkManager[403]: <warn>  [1760192386.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:19:46 IQ138000 NetworkManager[403]: <info>  [1760192386.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:19:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/342
Oct 11 14:19:46 IQ138000 NetworkManager[403]: <info>  [1760192386.0652] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:19:46 IQ138000 NetworkManager[403]: <info>  [1760192386.0654] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:52 IQ138000 NetworkManager[403]: <info>  [1760192392.1848] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:20:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:20:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:20:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:20:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:20:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:20:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:20:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:20:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:20:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:20:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:20:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:20:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:20:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:20:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:20:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:20:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:20:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:20:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:20:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:20:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:20:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:20:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:20:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:20:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:20:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:20:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:20:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:20:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:20:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:20:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:20:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:20:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:20:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:20:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:20:20 IQ138000 wb-watchdog[1501]: [INFO] Interval #484 started. Waiting up to 60 seconds for error...
Oct 11 14:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:20:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:20:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:20:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:20:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:20:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:20:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:20:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:20:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:20:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:20:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:20:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:20:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:20:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:20:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:20:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:20:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:20:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:20:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:20:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:20:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:20:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:20:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:20:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:20:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:20:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:20:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:20:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:20:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:20:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:20:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:20:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:20:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:20:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:20:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:20:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:20:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:20:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:20:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:20:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3111] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3116] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3122] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3176] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3194] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3197] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3295] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3323] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3345] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3351] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3352] Config: added 'scan_ssid' value '1'
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3353] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3354] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.3355] Config: added 'psk' value '<hidden>'
Oct 11 14:20:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/343
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.4211] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:20:47 IQ138000 NetworkManager[403]: <info>  [1760192447.4213] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:20:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:20:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 NetworkManager[403]: <warn>  [1760192473.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:21:13 IQ138000 NetworkManager[403]: <info>  [1760192473.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:21:13 IQ138000 NetworkManager[403]: <warn>  [1760192473.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:21:13 IQ138000 NetworkManager[403]: <info>  [1760192473.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:21:13 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:21:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/343
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 NetworkManager[403]: <info>  [1760192473.0678] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:21:13 IQ138000 NetworkManager[403]: <info>  [1760192473.0680] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:21:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:21:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:21:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:21:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:21:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:21:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:21:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:21:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:21:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:21:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:21:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:21:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:21:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:21:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:21:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:21:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:21:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:21:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:21:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:21:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:21:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:21:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:21:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:21:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:21:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 npm[3801]: [2025-10-11 14:21:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":40.88,"last_seen":1760192473631,"linkquality":83,"power_outage_count":48745,"temperature":26.78,"voltage":3025}'
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 npm[3801]: [2025-10-11 14:21:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.21,"last_seen":1760192473644,"linkquality":80,"power_outage_count":48745,"temperature":26.78,"voltage":3025}'
Oct 11 14:21:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:21:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:21:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:21:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:21:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:21:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:21:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:21:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:21:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:21:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:13 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:19 IQ138000 NetworkManager[403]: <info>  [1760192479.0895] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:21:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:21:20 IQ138000 wb-watchdog[2164]: [INFO] Interval #485 started. Waiting up to 60 seconds for error...
Oct 11 14:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:21:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:21:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:21:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:21:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:21:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:21:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:21:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:21:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:21:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:21:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:21:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:21:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:21:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:21:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:21:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:21:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:21:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:21:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:21:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:21:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:21:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:21:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:21:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:21:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:21:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:21:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:21:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:21:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:21:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:21:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:21:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:21:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:21:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:21:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:21:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:21:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:21:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:21:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:21:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:22:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:22:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:22:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:22:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:22:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:22:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:22:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:22:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:22:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:22:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:22:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:22:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:22:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:22:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:22:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:22:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:22:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:22:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:22:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:22:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:22:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:22:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:22:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:22:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:22:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:22:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:22:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:22:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:22:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:22:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:22:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:22:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:22:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:22:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3576] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3585] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3603] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3657] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3679] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3681] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3766] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3786] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3834] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3838] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3839] Config: added 'scan_ssid' value '1'
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3840] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3841] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:22:14 IQ138000 NetworkManager[403]: <info>  [1760192534.3842] Config: added 'psk' value '<hidden>'
Oct 11 14:22:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/344
Oct 11 14:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:22:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:22:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:22:18 IQ138000 NetworkManager[403]: <info>  [1760192538.4720] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:22:18 IQ138000 NetworkManager[403]: <info>  [1760192538.4722] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:20 IQ138000 wb-watchdog[2895]: [INFO] Interval #486 started. Waiting up to 60 seconds for error...
Oct 11 14:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:22:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:22:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:22:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:22:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:40 IQ138000 NetworkManager[403]: <warn>  [1760192560.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:22:40 IQ138000 NetworkManager[403]: <info>  [1760192560.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:22:40 IQ138000 NetworkManager[403]: <warn>  [1760192560.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:22:40 IQ138000 NetworkManager[403]: <info>  [1760192560.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:22:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/344
Oct 11 14:22:40 IQ138000 NetworkManager[403]: <info>  [1760192560.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:22:40 IQ138000 NetworkManager[403]: <info>  [1760192560.0702] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:22:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:22:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:22:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:22:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:22:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:22:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:22:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:22:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:22:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:22:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:22:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:22:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:22:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:22:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:22:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:22:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:22:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:22:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:22:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:22:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:22:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:22:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:22:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:22:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:22:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:22:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:22:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:22:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:22:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:22:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:22:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:22:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:22:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:22:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:22:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:22:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:22:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:22:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:22:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:46 IQ138000 NetworkManager[403]: <info>  [1760192566.0988] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:22:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:22:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:04 IQ138000 npm[3801]: [2025-10-11 14:23:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":35.21,"last_seen":1760192584274,"linkquality":105,"power_outage_count":48745,"temperature":26.69,"voltage":3025}'
Oct 11 14:23:04 IQ138000 npm[3801]: [2025-10-11 14:23:04] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.32,"last_seen":1760192584287,"linkquality":102,"power_outage_count":48745,"temperature":26.69,"voltage":3025}'
Oct 11 14:23:04 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760192764321,"cmd_timestamp_ms":1760192584321,"source":"regulation"}
Oct 11 14:23:04 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760192764321,"cmd_timestamp_ms":1760192584321,"source":"regulation"}
Oct 11 14:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:05 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 14:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:10 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 14:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:23:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:23:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:23:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:23:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:23:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:23:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:23:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:23:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:23:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:23:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:23:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:23:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:23:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:23:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:23:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:23:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:23:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:23:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:23:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:23:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:23:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:23:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:23:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:23:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:23:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:23:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:23:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:23:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:23:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:23:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:23:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:23:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:23:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:23:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:23:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:23:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:23:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:20 IQ138000 wb-watchdog[3524]: [INFO] Interval #487 started. Waiting up to 60 seconds for error...
Oct 11 14:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:23:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:23:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9494 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1344] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1349] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1355] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1449] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1473] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1486] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1611] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1640] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1657] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1660] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1661] Config: added 'scan_ssid' value '1'
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1662] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1663] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.1664] Config: added 'psk' value '<hidden>'
Oct 11 14:23:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/345
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.2431] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:23:41 IQ138000 NetworkManager[403]: <info>  [1760192621.2433] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:23:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:23:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:23:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:23:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:23:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:23:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:23:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:23:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:23:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:23:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:23:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:23:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:23:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:23:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:23:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:23:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:23:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:23:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:23:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:23:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:23:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:23:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:23:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:23:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:23:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:23:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:23:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:23:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:23:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:23:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:23:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:23:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:23:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:23:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:23:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:23:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:23:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:06 IQ138000 NetworkManager[403]: <warn>  [1760192646.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:24:06 IQ138000 NetworkManager[403]: <info>  [1760192646.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:24:06 IQ138000 NetworkManager[403]: <warn>  [1760192646.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:24:06 IQ138000 NetworkManager[403]: <info>  [1760192646.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:24:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/345
Oct 11 14:24:06 IQ138000 NetworkManager[403]: <info>  [1760192646.0659] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:24:06 IQ138000 NetworkManager[403]: <info>  [1760192646.0661] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:11 IQ138000 NetworkManager[403]: <info>  [1760192651.8513] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 14:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:24:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:24:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:24:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:24:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:24:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:24:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:24:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:24:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:24:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:24:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:24:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:24:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:24:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:24:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:24:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:24:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:24:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:24:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:24:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:24:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:24:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:24:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:24:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:24:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:24:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:24:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:24:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:24:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:24:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:24:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:24:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:24:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:24:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:24:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:24:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:24:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:24:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:24:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:24:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:24:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:20 IQ138000 wb-watchdog[4251]: [INFO] Interval #488 started. Waiting up to 60 seconds for error...
Oct 11 14:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:24:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:24:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:24:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:24:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:24:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:24:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:24:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:24:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:24:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:24:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:24:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:24:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:24:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:24:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:24:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:24:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:24:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:24:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:24:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:24:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:24:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:24:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:24:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:24:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:24:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:24:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:24:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:24:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:24:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:24:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:24:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:24:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:24:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:24:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:24:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:24:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:24:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:24:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:01 IQ138000 CRON[4648]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:25:01 IQ138000 CRON[4652]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 14:25:01 IQ138000 CRON[4648]: pam_unix(cron:session): session closed for user root
Oct 11 14:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2079] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2090] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2096] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2151] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2171] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2176] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2277] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2302] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2331] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2335] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2336] Config: added 'scan_ssid' value '1'
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2337] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2340] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.2341] Config: added 'psk' value '<hidden>'
Oct 11 14:25:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/346
Oct 11 14:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.3071] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:25:07 IQ138000 NetworkManager[403]: <info>  [1760192707.3073] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:25:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:25:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:25:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:25:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:25:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:25:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:25:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:25:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:25:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:25:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:25:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:25:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:25:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:25:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:25:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:25:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:25:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:25:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:25:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:25:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:25:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:25:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:25:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:25:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:25:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:25:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:25:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:25:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:25:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:25:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:25:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:25:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:25:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:25:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:25:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:25:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:20 IQ138000 wb-watchdog[4901]: [INFO] Interval #489 started. Waiting up to 60 seconds for error...
Oct 11 14:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:32 IQ138000 NetworkManager[403]: <warn>  [1760192732.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:25:32 IQ138000 NetworkManager[403]: <info>  [1760192732.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:25:32 IQ138000 NetworkManager[403]: <warn>  [1760192732.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:25:32 IQ138000 NetworkManager[403]: <info>  [1760192732.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:25:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/346
Oct 11 14:25:32 IQ138000 NetworkManager[403]: <info>  [1760192732.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:25:32 IQ138000 NetworkManager[403]: <info>  [1760192732.0701] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:37 IQ138000 NetworkManager[403]: <info>  [1760192737.9237] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:25:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:25:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:25:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:25:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:25:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:25:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:25:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:25:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:25:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:25:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:25:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:25:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:25:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:25:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:25:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:25:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:25:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:25:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:25:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:25:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:25:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:25:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:25:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:25:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:25:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:25:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:25:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:25:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:25:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:25:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:25:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:25:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:25:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:25:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:25:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:25:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:25:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:25:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 8970 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:26:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 14:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:26:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:26:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:26:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:26:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:26:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:26:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:26:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:26:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:26:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:26:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:26:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:26:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:26:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:26:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:26:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:26:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:26:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:26:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:26:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:26:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:26:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:26:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:26:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:26:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:26:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:26:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:26:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:26:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:26:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:26:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:26:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:26:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:26:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:26:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:26:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:26:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:20 IQ138000 wb-watchdog[5607]: [INFO] Interval #490 started. Waiting up to 60 seconds for error...
Oct 11 14:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:26:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9371] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9376] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9383] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9449] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9467] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9469] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9577] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9609] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9647] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9651] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9652] Config: added 'scan_ssid' value '1'
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9652] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9653] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:26:32 IQ138000 NetworkManager[403]: <info>  [1760192792.9654] Config: added 'psk' value '<hidden>'
Oct 11 14:26:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/347
Oct 11 14:26:33 IQ138000 NetworkManager[403]: <info>  [1760192793.0357] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:26:33 IQ138000 NetworkManager[403]: <info>  [1760192793.0359] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:26:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:26:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:26:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:26:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:26:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:26:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:26:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:26:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:26:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:26:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:26:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:26:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:26:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:26:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:26:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:26:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:26:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:26:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:26:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:26:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:26:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:26:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:26:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:26:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:26:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:26:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:26:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:26:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:26:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:26:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:26:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:26:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:26:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:26:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:26:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:26:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:26:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:26:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:26:58 IQ138000 NetworkManager[403]: <warn>  [1760192818.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:26:58 IQ138000 NetworkManager[403]: <info>  [1760192818.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:26:58 IQ138000 NetworkManager[403]: <warn>  [1760192818.0277] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:26:58 IQ138000 NetworkManager[403]: <info>  [1760192818.0293] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:26:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/347
Oct 11 14:26:58 IQ138000 NetworkManager[403]: <info>  [1760192818.0750] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:26:58 IQ138000 NetworkManager[403]: <info>  [1760192818.0752] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:26:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:26:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:27:03 IQ138000 NetworkManager[403]: <info>  [1760192823.6902] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:27:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:27:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:27:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:27:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:27:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:27:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:27:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:27:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:27:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:27:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:27:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:27:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:27:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:27:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:27:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:27:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:27:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:27:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:27:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:27:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:27:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:27:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:27:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:27:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:27:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:27:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:27:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:27:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:27:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:27:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:27:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:27:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:27:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:27:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:27:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:27:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:27:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:27:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:27:20 IQ138000 wb-watchdog[6241]: [INFO] Interval #491 started. Waiting up to 60 seconds for error...
Oct 11 14:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:27:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:27:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:27:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:27:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:27:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:27:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:27:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:27:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:27:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:27:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:27:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:27:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:27:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:27:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:27:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:27:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:27:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:27:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:27:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:27:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:27:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:27:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:27:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:27:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:27:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:27:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:27:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:27:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:27:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:27:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:27:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:27:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:27:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:27:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:27:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:27:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:27:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:27:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:27:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:27:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7209] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7213] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7219] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7275] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7292] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7294] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7393] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7416] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7433] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7436] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7437] Config: added 'scan_ssid' value '1'
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7438] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7439] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.7440] Config: added 'psk' value '<hidden>'
Oct 11 14:27:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/348
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.8154] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:27:58 IQ138000 NetworkManager[403]: <info>  [1760192878.8156] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:28:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:28:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:28:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:28:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:28:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:28:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:28:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:28:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:28:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:28:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:28:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:28:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:28:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:28:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:28:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:28:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:28:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:28:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:28:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:28:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:28:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:28:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:28:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:28:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:28:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:28:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:28:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:28:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:28:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:28:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:28:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:28:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:28:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:28:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:28:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:28:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:28:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:28:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:28:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:28:20 IQ138000 wb-watchdog[6940]: [INFO] Interval #492 started. Waiting up to 60 seconds for error...
Oct 11 14:28:24 IQ138000 NetworkManager[403]: <warn>  [1760192904.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:28:24 IQ138000 NetworkManager[403]: <info>  [1760192904.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:28:24 IQ138000 NetworkManager[403]: <warn>  [1760192904.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:28:24 IQ138000 NetworkManager[403]: <info>  [1760192904.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:28:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/348
Oct 11 14:28:24 IQ138000 NetworkManager[403]: <info>  [1760192904.0694] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:28:24 IQ138000 NetworkManager[403]: <info>  [1760192904.0695] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:30 IQ138000 NetworkManager[403]: <info>  [1760192910.4269] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:28:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:28:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:28:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:28:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:28:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:28:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:28:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:28:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:28:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:28:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:28:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:28:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:28:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:28:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:28:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:28:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:28:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:28:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:28:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:28:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:28:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:28:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:28:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:28:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:28:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:28:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:28:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:28:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:28:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:28:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:28:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:28:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:28:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:28:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:28:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:28:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:28:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:28:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:28:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:29:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:29:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:29:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:29:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:29:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:29:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:29:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:29:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:29:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:29:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:29:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:29:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:29:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:29:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:29:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:29:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:29:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:29:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:29:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:29:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:29:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:29:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:29:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:29:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:29:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:29:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:29:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:29:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:29:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:29:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:29:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:29:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:29:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:29:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:29:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:29:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:29:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:29:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:29:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:29:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:20 IQ138000 wb-watchdog[7567]: [INFO] Interval #493 started. Waiting up to 60 seconds for error...
Oct 11 14:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5056] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5061] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5066] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5123] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5140] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5142] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5258] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5297] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5337] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5341] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5342] Config: added 'scan_ssid' value '1'
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5343] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5344] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.5345] Config: added 'psk' value '<hidden>'
Oct 11 14:29:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/349
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.6444] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:29:25 IQ138000 NetworkManager[403]: <info>  [1760192965.6449] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:30 IQ138000 npm[3801]: [2025-10-11 14:29:30] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.18,"last_seen":1760192970071,"linkquality":25,"power_outage_count":35250,"temperature":24.22,"voltage":3075}'
Oct 11 14:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:29:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:29:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:29:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:29:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:29:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:29:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:29:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:29:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:29:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:29:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:29:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:29:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:29:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:29:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:29:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:29:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:29:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:29:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:29:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:29:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:29:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:29:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:29:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:29:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:29:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:29:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:29:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:29:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:29:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:29:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:29:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:29:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:29:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:29:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:29:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:29:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:29:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:29:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:29:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:29:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:29:51 IQ138000 NetworkManager[403]: <warn>  [1760192991.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:29:51 IQ138000 NetworkManager[403]: <info>  [1760192991.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:29:51 IQ138000 NetworkManager[403]: <warn>  [1760192991.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:29:51 IQ138000 NetworkManager[403]: <info>  [1760192991.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:29:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:29:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/349
Oct 11 14:29:51 IQ138000 NetworkManager[403]: <info>  [1760192991.0663] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:29:51 IQ138000 NetworkManager[403]: <info>  [1760192991.0665] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:29:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12808 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:29:57 IQ138000 NetworkManager[403]: <info>  [1760192997.2769] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:30:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:30:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:30:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:30:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:30:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:30:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:30:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:30:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:30:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:30:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:30:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:30:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:30:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:30:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:30:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:30:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:30:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:30:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:30:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:30:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:30:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:30:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:30:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:30:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:30:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:30:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:30:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:30:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:30:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:30:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:30:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:30:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:30:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:30:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:30:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:30:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:30:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:30:20 IQ138000 wb-watchdog[8266]: [INFO] Interval #494 started. Waiting up to 60 seconds for error...
Oct 11 14:30:21 IQ138000 npm[3801]: [2025-10-11 14:30:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.32,"last_seen":1760193021083,"linkquality":91,"power_outage_count":48745,"temperature":27.2,"voltage":3025}'
Oct 11 14:30:21 IQ138000 npm[3801]: [2025-10-11 14:30:21] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.54,"last_seen":1760193021093,"linkquality":94,"power_outage_count":48745,"temperature":27.2,"voltage":3025}'
Oct 11 14:30:21 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760193201153,"cmd_timestamp_ms":1760193021153,"source":"regulation"}
Oct 11 14:30:21 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760193201153,"cmd_timestamp_ms":1760193021153,"source":"regulation"}
Oct 11 14:30:22 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 14:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:30:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:27 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 14:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:30:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:30:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:30:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:30:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:30:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:30:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:30:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:30:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:30:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:30:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:30:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:30:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:30:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:30:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:30:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:30:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:30:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:30:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:30:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:30:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:30:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:30:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:30:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:30:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:30:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:30:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:30:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:30:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:30:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:30:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:30:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:30:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:30:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:30:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:30:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:30:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:30:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:30:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:30:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3011] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3046] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3075] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3249] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3286] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3288] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3500] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3521] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3544] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3547] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3548] Config: added 'scan_ssid' value '1'
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3548] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3554] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:30:52 IQ138000 NetworkManager[403]: <info>  [1760193052.3556] Config: added 'psk' value '<hidden>'
Oct 11 14:30:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/350
Oct 11 14:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:56 IQ138000 NetworkManager[403]: <info>  [1760193056.4318] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:30:56 IQ138000 NetworkManager[403]: <info>  [1760193056.4320] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:30:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:30:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:31:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:31:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:31:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:31:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:31:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:31:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:31:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:31:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:31:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:31:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:31:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:31:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:31:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:31:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:31:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:31:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:31:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:31:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:31:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:31:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:31:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:31:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:31:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:31:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:31:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:31:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:31:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:31:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:31:18 IQ138000 NetworkManager[403]: <warn>  [1760193078.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:31:18 IQ138000 NetworkManager[403]: <info>  [1760193078.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:31:18 IQ138000 NetworkManager[403]: <warn>  [1760193078.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:31:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:31:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:31:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:31:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:31:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:31:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:31:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:31:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:31:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:31:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:31:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:31:18 IQ138000 NetworkManager[403]: <info>  [1760193078.0285] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:31:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/350
Oct 11 14:31:18 IQ138000 NetworkManager[403]: <info>  [1760193078.0784] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:31:18 IQ138000 NetworkManager[403]: <info>  [1760193078.0786] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:20 IQ138000 wb-watchdog[8890]: [INFO] Interval #495 started. Waiting up to 60 seconds for error...
Oct 11 14:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:31:24 IQ138000 NetworkManager[403]: <info>  [1760193084.0401] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:30 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:31:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:31:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:31:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:31:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:31:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:31:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:31:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:31:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:31:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:31:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:31:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:31:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:31:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:31:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:31:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:31:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:31:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:31:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:31:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:31:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:31:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:31:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:31:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:31:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:31:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:31:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:31:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:31:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:31:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:31:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:31:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:31:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:31:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:31:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:31:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:31:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:31:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:31:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:32:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:32:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:32:11 IQ138000 npm[3801]: [2025-10-11 14:32:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":44.54,"last_seen":1760193131712,"linkquality":83,"power_outage_count":48745,"temperature":27.3,"voltage":3025}'
Oct 11 14:32:11 IQ138000 npm[3801]: [2025-10-11 14:32:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.45,"last_seen":1760193131724,"linkquality":83,"power_outage_count":48745,"temperature":27.3,"voltage":3025}'
Oct 11 14:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:32:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:32:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:32:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:32:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:32:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:32:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:32:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:32:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:32:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:32:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:32:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:32:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:32:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:32:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:32:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:32:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:32:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:32:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:32:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:32:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:32:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:32:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:32:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:32:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:32:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:32:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:32:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:32:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:32:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:32:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:32:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:32:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:32:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:32:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:32:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:32:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:32:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1062] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1068] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1073] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1143] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1166] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1168] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1255] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1277] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1295] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1299] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1315] Config: added 'scan_ssid' value '1'
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1317] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1318] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.1319] Config: added 'psk' value '<hidden>'
Oct 11 14:32:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/351
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.2011] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:32:19 IQ138000 NetworkManager[403]: <info>  [1760193139.2013] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:32:20 IQ138000 wb-watchdog[9593]: [INFO] Interval #496 started. Waiting up to 60 seconds for error...
Oct 11 14:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:32:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:33 IQ138000 npm[3801]: [2025-10-11 14:32:33] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":53.27,"last_seen":1760193153756,"linkquality":76,"power_outage_count":25795,"pressure":992.2,"temperature":22.66,"voltage":2995}'
Oct 11 14:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:44 IQ138000 NetworkManager[403]: <warn>  [1760193164.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:32:44 IQ138000 NetworkManager[403]: <info>  [1760193164.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:32:44 IQ138000 NetworkManager[403]: <warn>  [1760193164.0258] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:32:44 IQ138000 NetworkManager[403]: <info>  [1760193164.0271] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:32:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/351
Oct 11 14:32:44 IQ138000 NetworkManager[403]: <info>  [1760193164.0806] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:32:44 IQ138000 NetworkManager[403]: <info>  [1760193164.0808] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:32:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:32:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:32:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:32:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:32:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:32:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:32:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:32:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:32:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:32:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:32:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:32:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:32:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:32:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:32:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:32:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:32:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:32:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:32:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:32:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:32:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:32:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:32:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:32:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:32:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:32:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:32:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:32:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:32:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:32:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:32:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:32:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:32:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:32:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:32:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:32:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:32:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:49 IQ138000 NetworkManager[403]: <info>  [1760193169.8844] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:32:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:32:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:33:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:33:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:33:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:33:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:33:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:33:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:33:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:33:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:33:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:33:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:33:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:33:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:33:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:33:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:33:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:33:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:33:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:33:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:33:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:33:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:33:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:33:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:33:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:33:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:33:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:33:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:33:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:33:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:33:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:33:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:33:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:33:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:33:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:33:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:33:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:33:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:33:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:33:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:33:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:20 IQ138000 wb-watchdog[10194]: [INFO] Interval #497 started. Waiting up to 60 seconds for error...
Oct 11 14:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:33:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L3, row count 7183, limit 7042
Oct 11 14:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.0959] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.0983] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.0996] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1114] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1138] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1140] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1245] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1261] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1282] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1285] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1289] Config: added 'scan_ssid' value '1'
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1290] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1291] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.1292] Config: added 'psk' value '<hidden>'
Oct 11 14:33:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/352
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.2062] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:33:45 IQ138000 NetworkManager[403]: <info>  [1760193225.2064] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:33:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:33:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:33:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:33:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:33:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:33:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:33:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:33:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:33:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:33:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:33:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:33:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:33:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:33:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:33:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:33:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:33:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:33:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:33:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:33:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:33:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:33:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:33:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:33:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:33:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:33:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:33:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:33:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:33:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:33:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:33:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:33:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:33:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:33:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:33:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:33:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:33:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:33:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:33:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:33:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:33:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:33:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:34:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:10 IQ138000 NetworkManager[403]: <warn>  [1760193250.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:34:10 IQ138000 NetworkManager[403]: <info>  [1760193250.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:34:10 IQ138000 NetworkManager[403]: <warn>  [1760193250.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:34:10 IQ138000 NetworkManager[403]: <info>  [1760193250.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:34:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/352
Oct 11 14:34:10 IQ138000 NetworkManager[403]: <info>  [1760193250.0724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:34:10 IQ138000 NetworkManager[403]: <info>  [1760193250.0726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:34:15 IQ138000 NetworkManager[403]: <info>  [1760193255.8246] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:34:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:34:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:34:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:34:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:34:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:34:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:34:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:34:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:34:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:34:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:34:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:34:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:34:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:34:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:34:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:34:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:34:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:34:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:34:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:34:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:34:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:34:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:34:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:34:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:34:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:34:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:34:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:34:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:34:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:34:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:34:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:34:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:34:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:34:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:34:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:34:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:34:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:34:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:34:20 IQ138000 wb-watchdog[10906]: [INFO] Interval #498 started. Waiting up to 60 seconds for error...
Oct 11 14:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:34:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:34:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:34:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:34:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:34:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:34:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:34:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:34:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:34:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:34:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:34:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:34:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:34:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:34:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:34:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:34:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:34:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:34:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:34:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:34:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:34:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:34:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:34:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:34:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:34:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:34:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:34:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:34:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:34:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:34:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:34:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:34:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:34:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:34:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:34:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:34:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:34:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:34:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:34:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:34:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:34:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:34:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:34:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:01 IQ138000 CRON[11275]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:01 IQ138000 CRON[11279]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 14:35:01 IQ138000 CRON[11275]: pam_unix(cron:session): session closed for user root
Oct 11 14:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8581] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8585] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8591] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8672] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8703] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8705] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8802] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8836] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8866] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8879] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8881] Config: added 'scan_ssid' value '1'
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8884] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8886] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.8887] Config: added 'psk' value '<hidden>'
Oct 11 14:35:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/353
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.9652] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:35:10 IQ138000 NetworkManager[403]: <info>  [1760193310.9654] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:35:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:35:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:35:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:35:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:35:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:35:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:35:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:35:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:35:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:35:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:35:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:35:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:35:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:35:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:35:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:35:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:35:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:35:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:35:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:35:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:35:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:35:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:35:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:35:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:35:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:35:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:35:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:35:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:35:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:35:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:35:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:35:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:35:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:35:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:35:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:35:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:35:20 IQ138000 wb-watchdog[11530]: [INFO] Interval #499 started. Waiting up to 60 seconds for error...
Oct 11 14:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:27 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 14:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:36 IQ138000 NetworkManager[403]: <warn>  [1760193336.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:35:36 IQ138000 NetworkManager[403]: <info>  [1760193336.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:35:36 IQ138000 NetworkManager[403]: <warn>  [1760193336.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:35:36 IQ138000 NetworkManager[403]: <info>  [1760193336.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:35:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/353
Oct 11 14:35:36 IQ138000 NetworkManager[403]: <info>  [1760193336.0683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:35:36 IQ138000 NetworkManager[403]: <info>  [1760193336.0685] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:41 IQ138000 NetworkManager[403]: <info>  [1760193341.6172] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:35:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:35:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:35:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:35:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:35:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:35:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:35:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:35:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:35:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:35:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:35:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:35:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:35:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:35:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:35:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:35:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:35:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:35:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:35:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:35:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:35:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:35:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:35:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:35:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:35:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:35:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:35:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:35:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:35:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:35:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:35:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:35:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:35:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:35:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:35:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:35:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:35:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:35:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:36:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:36:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:36:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:36:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:36:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:36:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:36:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:36:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:36:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:36:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:36:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:36:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:36:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:36:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:36:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:36:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:36:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:36:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:36:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:36:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:36:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:36:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:36:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:36:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:36:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:36:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:36:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:36:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:36:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:36:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:36:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:36:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:36:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:36:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:36:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:36:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:36:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:36:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:36:20 IQ138000 wb-watchdog[12221]: [INFO] Interval #500 started. Waiting up to 60 seconds for error...
Oct 11 14:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:36:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:36:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8689] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8694] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8700] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8747] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8766] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8768] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8864] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8884] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8902] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8906] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8907] Config: added 'scan_ssid' value '1'
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8908] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8910] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.8911] Config: added 'psk' value '<hidden>'
Oct 11 14:36:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/354
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.9688] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:36:36 IQ138000 NetworkManager[403]: <info>  [1760193396.9690] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:36:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:36:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:36:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:36:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:36:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:36:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:36:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:36:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:36:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:36:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:36:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:36:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:36:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:36:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:36:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:36:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:36:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:36:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:36:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:36:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:36:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:36:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:36:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:36:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:36:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:36:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:36:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:36:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:36:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:36:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:36:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:36:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:36:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:36:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:36:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:36:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:36:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:36:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:02 IQ138000 NetworkManager[403]: <warn>  [1760193422.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:37:02 IQ138000 NetworkManager[403]: <info>  [1760193422.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:37:02 IQ138000 NetworkManager[403]: <warn>  [1760193422.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:37:02 IQ138000 NetworkManager[403]: <info>  [1760193422.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:37:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/354
Oct 11 14:37:02 IQ138000 NetworkManager[403]: <info>  [1760193422.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:37:02 IQ138000 NetworkManager[403]: <info>  [1760193422.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:07 IQ138000 npm[3801]: [2025-10-11 14:37:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":53.27,"last_seen":1760193427155,"linkquality":91,"power_outage_count":25795,"pressure":992.2,"temperature":22.74,"voltage":2995}'
Oct 11 14:37:07 IQ138000 npm[3801]: [2025-10-11 14:37:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":53.88,"last_seen":1760193427171,"linkquality":83,"power_outage_count":25795,"pressure":992.2,"temperature":22.74,"voltage":2995}'
Oct 11 14:37:07 IQ138000 npm[3801]: [2025-10-11 14:37:07] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":53.88,"last_seen":1760193427171,"linkquality":83,"power_outage_count":25795,"pressure":992.3,"temperature":22.74,"voltage":2995}'
Oct 11 14:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:08 IQ138000 NetworkManager[403]: <info>  [1760193428.6433] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:37:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:37:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:37:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:37:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:37:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:37:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:37:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:37:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:37:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:37:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:37:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:37:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:37:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:37:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:37:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:37:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:37:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:37:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:37:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:37:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:37:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:37:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:37:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:37:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:37:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:37:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:37:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:37:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:37:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:37:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:37:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:37:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:37:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:37:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:37:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:37:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:37:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:37:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:37:20 IQ138000 wb-watchdog[12851]: [INFO] Interval #501 started. Waiting up to 60 seconds for error...
Oct 11 14:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:37:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L2, row count 7183, limit 7042
Oct 11 14:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:37:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:37:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:37:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:37:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:37:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:37:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:37:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:37:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:37:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:37:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:37:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:37:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:37:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:37:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:37:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:37:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:37:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:37:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:37:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:37:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:37:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:37:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:37:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:37:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:37:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:37:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:37:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:37:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:37:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:37:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:37:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:37:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:37:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:37:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:37:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:37:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:37:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:37:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:37:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:37:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:01 IQ138000 CRON[13303]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:38:01 IQ138000 CRON[13307]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 14:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7286] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7300] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7323] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7381] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7411] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7425] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7550] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7579] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7623] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7633] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7634] Config: added 'scan_ssid' value '1'
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7635] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7637] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.7638] Config: added 'psk' value '<hidden>'
Oct 11 14:38:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/355
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.8349] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:38:03 IQ138000 NetworkManager[403]: <info>  [1760193483.8352] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:38:08 IQ138000 sSMTP[13327]: Unable to locate mail
Oct 11 14:38:08 IQ138000 cron[13327]: sendmail: Cannot open mail:25
Oct 11 14:38:08 IQ138000 sSMTP[13327]: Cannot open mail:25
Oct 11 14:38:08 IQ138000 CRON[13303]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 14:38:08 IQ138000 CRON[13303]: pam_unix(cron:session): session closed for user root
Oct 11 14:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:38:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:38:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:20 IQ138000 wb-watchdog[13543]: [INFO] Interval #502 started. Waiting up to 60 seconds for error...
Oct 11 14:38:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:38:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:38:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:38:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:38:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:38:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:38:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:38:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:38:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:38:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:38:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:38:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:38:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:38:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:38:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:38:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:38:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:38:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:38:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:38:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:38:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:38:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:38:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:38:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:38:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:38:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:38:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:38:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:38:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:38:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:38:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:38:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:38:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:38:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:38:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:38:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:38:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:38:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:38:29 IQ138000 NetworkManager[403]: <warn>  [1760193509.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:38:29 IQ138000 NetworkManager[403]: <info>  [1760193509.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:38:29 IQ138000 NetworkManager[403]: <warn>  [1760193509.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:38:29 IQ138000 NetworkManager[403]: <info>  [1760193509.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:38:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/355
Oct 11 14:38:29 IQ138000 NetworkManager[403]: <info>  [1760193509.0686] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:38:29 IQ138000 NetworkManager[403]: <info>  [1760193509.0688] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:38:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:38:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:35 IQ138000 NetworkManager[403]: <info>  [1760193515.5594] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:38:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:38:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:38:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:38:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:38:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:38:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:38:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:38:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:38:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:38:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:38:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:38:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:38:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:38:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:38:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:38:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:38:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:38:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:38:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:38:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:38:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:38:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:38:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:38:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:38:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:38:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:38:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:38:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:38:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:38:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:38:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:38:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:38:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:38:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:38:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:38:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:39:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:39:20 IQ138000 wb-watchdog[14154]: [INFO] Interval #503 started. Waiting up to 60 seconds for error...
Oct 11 14:39:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:39:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:39:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:39:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:39:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:39:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:39:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:39:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:39:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:39:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:39:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:39:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:39:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:39:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:39:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:39:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:39:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:39:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:39:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:39:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:39:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:39:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:39:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:39:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:39:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:39:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:39:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:39:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:39:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:39:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:39:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:39:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:39:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:39:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:39:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:39:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:39:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:39:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:39:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6209] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6220] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6226] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6275] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6290] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6292] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6375] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6409] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6439] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6453] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6454] Config: added 'scan_ssid' value '1'
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6455] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6456] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.6457] Config: added 'psk' value '<hidden>'
Oct 11 14:39:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/356
Oct 11 14:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.7183] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:39:30 IQ138000 NetworkManager[403]: <info>  [1760193570.7185] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:39:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L2, row count 7183, limit 7042
Oct 11 14:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:39:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:39:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:39:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:39:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:39:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:39:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:39:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:39:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:39:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:39:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:39:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:39:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:39:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:39:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:39:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:39:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:39:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:39:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:39:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:39:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:39:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:39:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:39:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:39:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:39:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:39:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:39:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:39:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:39:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:39:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:39:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:39:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:39:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:39:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:39:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:39:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:39:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:39:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:39:56 IQ138000 NetworkManager[403]: <warn>  [1760193596.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:39:56 IQ138000 NetworkManager[403]: <info>  [1760193596.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:39:56 IQ138000 NetworkManager[403]: <warn>  [1760193596.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:39:56 IQ138000 NetworkManager[403]: <info>  [1760193596.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:39:56 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:39:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/356
Oct 11 14:39:56 IQ138000 NetworkManager[403]: <info>  [1760193596.0654] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:39:56 IQ138000 NetworkManager[403]: <info>  [1760193596.0656] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:39:56 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:40:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:40:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:40:02 IQ138000 NetworkManager[403]: <info>  [1760193602.3450] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:40:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:40:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:40:20 IQ138000 wb-watchdog[14865]: [INFO] Interval #504 started. Waiting up to 60 seconds for error...
Oct 11 14:40:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:40:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:40:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:40:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:40:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:40:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:40:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:40:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:40:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:40:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:40:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:40:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:40:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:40:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:40:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:40:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:40:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:40:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:40:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:40:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:40:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:40:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:40:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:40:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:40:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:40:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:40:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:40:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:40:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:40:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:40:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:40:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:40:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:40:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:40:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:40:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:40:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:40:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:40:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:40:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:40:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:40:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:40:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:40:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:40:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:40:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:40:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:40:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:40:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:40:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:40:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:40:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:40:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:40:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:40:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:40:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:40:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:40:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:40:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:40:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:40:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:40:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:40:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:40:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:40:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:40:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:40:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:40:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:40:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:40:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:40:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:40:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:40:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:40:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:40:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:40:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:40:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4044] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4050] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4058] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4126] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4159] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4161] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4334] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4361] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4381] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4385] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4386] Config: added 'scan_ssid' value '1'
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4387] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4389] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:40:57 IQ138000 NetworkManager[403]: <info>  [1760193657.4390] Config: added 'psk' value '<hidden>'
Oct 11 14:40:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/357
Oct 11 14:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:40:59 IQ138000 NetworkManager[403]: <info>  [1760193659.5201] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:40:59 IQ138000 NetworkManager[403]: <info>  [1760193659.5203] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:41:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:41:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:41:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:20 IQ138000 npm[3801]: [2025-10-11 14:41:20] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":53.88,"last_seen":1760193680029,"linkquality":72,"power_outage_count":25795,"pressure":992.3,"temperature":22.77,"voltage":2995}'
Oct 11 14:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:20 IQ138000 npm[3801]: [2025-10-11 14:41:20] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":54.31,"last_seen":1760193680048,"linkquality":72,"power_outage_count":25795,"pressure":992.3,"temperature":22.77,"voltage":2995}'
Oct 11 14:41:20 IQ138000 npm[3801]: [2025-10-11 14:41:20] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":54.31,"last_seen":1760193680048,"linkquality":72,"power_outage_count":25795,"pressure":992,"temperature":22.77,"voltage":2995}'
Oct 11 14:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:41:20 IQ138000 wb-watchdog[15473]: [INFO] Interval #505 started. Waiting up to 60 seconds for error...
Oct 11 14:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:41:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:41:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:41:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:41:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:41:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:41:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:41:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:41:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:41:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:41:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:41:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:41:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:41:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:41:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:41:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:41:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:41:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:41:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:41:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:41:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:41:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:41:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:41:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:41:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:41:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:41:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:41:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:41:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:41:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:41:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:41:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:41:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:41:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:41:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:41:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:41:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:41:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:41:23 IQ138000 NetworkManager[403]: <warn>  [1760193683.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:41:23 IQ138000 NetworkManager[403]: <info>  [1760193683.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:41:23 IQ138000 NetworkManager[403]: <warn>  [1760193683.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:41:23 IQ138000 NetworkManager[403]: <info>  [1760193683.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:41:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/357
Oct 11 14:41:23 IQ138000 NetworkManager[403]: <info>  [1760193683.0650] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:41:23 IQ138000 NetworkManager[403]: <info>  [1760193683.0652] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:41:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:41:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:41:29 IQ138000 NetworkManager[403]: <info>  [1760193689.1274] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:41:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:41:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L1, row count 7183, limit 7042
Oct 11 14:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8708 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:41:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:41:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:41:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:41:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:41:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:41:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:41:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:41:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:41:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:41:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:41:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:41:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:41:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:41:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:41:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:41:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:41:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:41:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:41:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:41:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:41:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:41:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:41:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:41:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:41:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:41:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:41:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:41:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:41:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:41:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:41:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:41:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:41:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:41:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:41:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:41:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:41:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:41:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:41:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:41:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:42:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:42:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 14:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 14:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 14:42:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 14:42:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 14:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:20 IQ138000 wb-watchdog[16177]: [INFO] Interval #506 started. Waiting up to 60 seconds for error...
Oct 11 14:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:42:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:42:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:42:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:42:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:42:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:42:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:42:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:42:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:42:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:42:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:42:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:42:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:42:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:42:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:42:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:42:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:42:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:42:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:42:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:42:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:42:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:42:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:42:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:42:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:42:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:42:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:42:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:42:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:42:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:42:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:42:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:42:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:42:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:42:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:42:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:42:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1573] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1597] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1606] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1701] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1720] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1724] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1889] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1908] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1932] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1935] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1936] Config: added 'scan_ssid' value '1'
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1937] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1938] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.1939] Config: added 'psk' value '<hidden>'
Oct 11 14:42:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/358
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.2687] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:42:24 IQ138000 NetworkManager[403]: <info>  [1760193744.2689] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:42:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:42:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:49 IQ138000 NetworkManager[403]: <warn>  [1760193769.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:42:49 IQ138000 NetworkManager[403]: <info>  [1760193769.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:42:49 IQ138000 NetworkManager[403]: <warn>  [1760193769.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:42:49 IQ138000 NetworkManager[403]: <info>  [1760193769.0294] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:42:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/358
Oct 11 14:42:49 IQ138000 NetworkManager[403]: <info>  [1760193769.0771] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:42:49 IQ138000 NetworkManager[403]: <info>  [1760193769.0773] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:42:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:42:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:42:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:42:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:42:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:42:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:42:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:42:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:42:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:42:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:42:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:42:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:42:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:42:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:42:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:42:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:42:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:42:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:42:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:42:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:42:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:42:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:42:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:42:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:42:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:42:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:42:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:42:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:42:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:42:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:42:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:42:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:42:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:42:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:42:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:42:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:42:54 IQ138000 NetworkManager[403]: <info>  [1760193774.9257] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:42:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:42:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:43:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:43:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:43:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:43:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:20 IQ138000 wb-watchdog[16790]: [INFO] Interval #507 started. Waiting up to 60 seconds for error...
Oct 11 14:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:43:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:43:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:43:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:43:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:43:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:43:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:43:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:43:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:43:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:43:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:43:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:43:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:43:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:43:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:43:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:43:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:43:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:43:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:43:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:43:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:43:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:43:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:43:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:43:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:43:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:43:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:43:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:43:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:43:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:43:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:43:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:43:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:43:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:43:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:43:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:43:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:43:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:43:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:43:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9060] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9066] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9072] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9143] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9161] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9163] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9241] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9262] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9284] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9288] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9289] Config: added 'scan_ssid' value '1'
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9291] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9292] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:43:49 IQ138000 NetworkManager[403]: <info>  [1760193829.9293] Config: added 'psk' value '<hidden>'
Oct 11 14:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/359
Oct 11 14:43:50 IQ138000 NetworkManager[403]: <info>  [1760193830.0008] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:43:50 IQ138000 NetworkManager[403]: <info>  [1760193830.0010] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:43:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:43:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:43:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:43:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:43:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:43:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:43:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:43:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:43:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:43:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:43:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:43:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:43:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:43:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:43:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:43:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:43:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:43:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:43:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:43:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:43:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:43:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:43:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:43:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:43:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:43:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:43:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:43:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:43:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:43:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:43:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:43:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:43:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:43:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:43:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:43:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:44:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:44:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:15 IQ138000 NetworkManager[403]: <warn>  [1760193855.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:44:15 IQ138000 NetworkManager[403]: <info>  [1760193855.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:44:15 IQ138000 NetworkManager[403]: <warn>  [1760193855.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:44:15 IQ138000 NetworkManager[403]: <info>  [1760193855.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:44:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/359
Oct 11 14:44:15 IQ138000 NetworkManager[403]: <info>  [1760193855.0704] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:44:15 IQ138000 NetworkManager[403]: <info>  [1760193855.0706] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:44:20 IQ138000 wb-watchdog[17491]: [INFO] Interval #508 started. Waiting up to 60 seconds for error...
Oct 11 14:44:20 IQ138000 NetworkManager[403]: <info>  [1760193860.6731] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:44:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:44:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:44:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:44:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:44:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:44:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:44:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:44:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:44:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:44:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:44:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:44:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:44:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:44:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:44:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:44:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:44:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:44:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:44:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:44:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:44:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:44:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:44:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:44:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:44:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:44:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:44:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:44:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:44:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:44:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:44:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:44:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:44:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:44:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:44:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:44:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:44:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:44:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:44:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:44:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:44:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:44:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:44:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:44:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:44:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:44:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:44:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:44:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:44:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:44:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:44:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:44:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:44:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:44:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:44:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:44:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:44:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:44:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:44:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:44:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:44:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:44:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:44:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:44:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:44:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:44:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:44:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:44:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:44:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:44:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:44:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:44:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:44:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:44:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:44:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:01 IQ138000 CRON[17867]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:45:01 IQ138000 CRON[17871]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 14:45:01 IQ138000 CRON[17867]: pam_unix(cron:session): session closed for user root
Oct 11 14:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6270] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6307] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6318] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6447] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6479] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6480] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6622] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6640] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6656] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6660] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6661] Config: added 'scan_ssid' value '1'
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6662] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6663] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.6664] Config: added 'psk' value '<hidden>'
Oct 11 14:45:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/360
Oct 11 14:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:45:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:45:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.7363] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:45:15 IQ138000 NetworkManager[403]: <info>  [1760193915.7366] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:20 IQ138000 wb-watchdog[18112]: [INFO] Interval #509 started. Waiting up to 60 seconds for error...
Oct 11 14:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:45:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:45:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:45:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:45:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:45:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:45:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:45:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:45:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:45:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:45:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:45:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:45:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:45:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:45:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:45:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:45:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:45:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:45:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:45:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:45:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:45:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:45:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:45:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:45:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:45:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:45:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:45:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:45:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:45:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:45:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:45:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:45:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:45:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:45:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:45:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:45:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:45:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:45:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:45:32 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 14:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:41 IQ138000 NetworkManager[403]: <warn>  [1760193941.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:45:41 IQ138000 NetworkManager[403]: <info>  [1760193941.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:45:41 IQ138000 NetworkManager[403]: <warn>  [1760193941.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:45:41 IQ138000 NetworkManager[403]: <info>  [1760193941.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:45:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/360
Oct 11 14:45:41 IQ138000 NetworkManager[403]: <info>  [1760193941.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:45:41 IQ138000 NetworkManager[403]: <info>  [1760193941.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:45:47 IQ138000 NetworkManager[403]: <info>  [1760193947.3616] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:45:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:45:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:45:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:45:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:45:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:45:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:45:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:45:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:45:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:45:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:45:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:45:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:45:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:45:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:45:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:45:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:45:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:45:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:45:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:45:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:45:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:45:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:45:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:45:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:45:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:45:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:45:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:45:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:45:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:45:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:45:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:45:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:45:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:45:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:45:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:45:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:45:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:45:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:46:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5394 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:20 IQ138000 wb-watchdog[18812]: [INFO] Interval #510 started. Waiting up to 60 seconds for error...
Oct 11 14:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:23 IQ138000 npm[3801]: [2025-10-11 14:46:23] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":54.31,"last_seen":1760193983440,"linkquality":87,"power_outage_count":25795,"pressure":992,"temperature":22.78,"voltage":2995}'
Oct 11 14:46:23 IQ138000 npm[3801]: [2025-10-11 14:46:23] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.16,"last_seen":1760193983455,"linkquality":83,"power_outage_count":25795,"pressure":992,"temperature":22.78,"voltage":2995}'
Oct 11 14:46:23 IQ138000 npm[3801]: [2025-10-11 14:46:23] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.16,"last_seen":1760193983455,"linkquality":83,"power_outage_count":25795,"pressure":992.3,"temperature":22.78,"voltage":2995}'
Oct 11 14:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:46:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:46:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:46:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:46:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:46:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:46:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:46:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:46:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:46:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:46:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:46:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:46:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:46:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:46:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:46:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:46:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:46:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:46:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:46:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:46:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:46:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:46:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:46:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:46:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:46:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:46:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:46:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:46:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:46:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:46:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:46:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:46:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:46:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:46:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:46:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:46:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2059] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2065] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2071] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2133] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2160] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2163] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2371] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2393] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2413] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2417] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2418] Config: added 'scan_ssid' value '1'
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2419] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2420] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.2421] Config: added 'psk' value '<hidden>'
Oct 11 14:46:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/361
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.3171] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:46:42 IQ138000 NetworkManager[403]: <info>  [1760194002.3174] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:46:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:46:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:46:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:46:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:46:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:46:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:46:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:46:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:46:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:46:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:46:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:46:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:46:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:46:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:46:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:46:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:46:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:46:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:46:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:46:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:46:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:46:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:46:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:46:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:46:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:46:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:46:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:46:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:46:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:46:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:46:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:46:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:46:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:46:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:46:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:46:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:46:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:46:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:07 IQ138000 NetworkManager[403]: <warn>  [1760194027.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:47:07 IQ138000 NetworkManager[403]: <info>  [1760194027.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:47:07 IQ138000 NetworkManager[403]: <warn>  [1760194027.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:47:07 IQ138000 NetworkManager[403]: <info>  [1760194027.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:47:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/361
Oct 11 14:47:07 IQ138000 NetworkManager[403]: <info>  [1760194027.0679] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:47:07 IQ138000 NetworkManager[403]: <info>  [1760194027.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:12 IQ138000 NetworkManager[403]: <info>  [1760194032.9730] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:20 IQ138000 wb-watchdog[19428]: [INFO] Interval #511 started. Waiting up to 60 seconds for error...
Oct 11 14:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:47:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:47:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:47:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:47:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:47:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:47:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:47:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:47:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:47:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:47:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:47:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:47:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:47:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:47:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:47:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:47:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:47:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:47:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:47:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:47:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:47:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:47:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:47:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:47:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:47:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:47:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:47:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:47:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:47:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:47:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:47:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:47:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:47:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:47:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:47:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:47:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:47:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:47:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:47:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:47:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:47:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:47:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:47:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:47:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:47:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:47:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:47:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:47:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:47:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:47:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:47:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:47:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:47:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:47:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:47:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:47:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:47:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:47:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:47:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:47:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:47:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:47:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:47:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:47:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:47:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:47:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:47:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:47:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:47:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:47:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:47:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:47:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:47:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:47:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:47:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:47:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:47:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:47:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:47:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:48:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9292] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9306] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9328] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9396] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9431] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9435] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9582] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9624] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9650] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9667] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9674] Config: added 'scan_ssid' value '1'
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9676] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9677] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:48:07 IQ138000 NetworkManager[403]: <info>  [1760194087.9678] Config: added 'psk' value '<hidden>'
Oct 11 14:48:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/362
Oct 11 14:48:08 IQ138000 NetworkManager[403]: <info>  [1760194088.0424] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:48:08 IQ138000 NetworkManager[403]: <info>  [1760194088.0426] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8441 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:48:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:20 IQ138000 wb-watchdog[20126]: [INFO] Interval #512 started. Waiting up to 60 seconds for error...
Oct 11 14:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:48:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:48:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:48:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:48:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:48:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:48:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:48:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:48:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:48:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:48:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:48:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:48:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:48:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:48:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:48:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:48:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:48:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:48:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:48:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:48:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:48:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:48:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:48:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:48:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:48:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:48:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:48:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:48:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:48:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:48:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:48:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:48:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:48:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:48:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:48:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:48:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:48:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:48:33 IQ138000 NetworkManager[403]: <warn>  [1760194113.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:48:33 IQ138000 NetworkManager[403]: <info>  [1760194113.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:48:33 IQ138000 NetworkManager[403]: <warn>  [1760194113.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:48:33 IQ138000 NetworkManager[403]: <info>  [1760194113.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:48:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/362
Oct 11 14:48:33 IQ138000 NetworkManager[403]: <info>  [1760194113.0932] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:48:33 IQ138000 NetworkManager[403]: <info>  [1760194113.0934] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:48:38 IQ138000 NetworkManager[403]: <info>  [1760194118.7368] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:48:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:48:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:48:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:48:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:48:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:48:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:48:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:48:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:48:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:48:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:48:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:48:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:48:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:48:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:48:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:48:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:48:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:48:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:48:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:48:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:48:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:48:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:48:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:48:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:48:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:48:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:48:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:48:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:48:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:48:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:48:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:48:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:48:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:48:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:48:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:48:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:48:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:48:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:49:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12828 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:20 IQ138000 wb-watchdog[20746]: [INFO] Interval #513 started. Waiting up to 60 seconds for error...
Oct 11 14:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:49:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:49:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:49:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:49:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:49:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:49:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:49:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:49:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:49:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:49:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:49:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:49:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:49:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:49:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:49:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:49:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:49:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:49:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:49:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:49:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:49:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:49:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:49:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:49:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:49:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:49:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:49:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:49:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:49:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:49:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:49:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:49:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:49:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:49:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:49:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:49:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6599] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6605] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6611] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6665] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6683] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6685] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6777] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6797] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6819] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6822] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6824] Config: added 'scan_ssid' value '1'
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6825] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6826] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.6827] Config: added 'psk' value '<hidden>'
Oct 11 14:49:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/363
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.7532] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:49:33 IQ138000 NetworkManager[403]: <info>  [1760194173.7533] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_22/External Sensor 1, row count 7183, limit 7042
Oct 11 14:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:49:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:49:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:49:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:49:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:49:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:49:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:49:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:49:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:49:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:49:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:49:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:49:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:49:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:49:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:49:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:49:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:49:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:49:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:49:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:49:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:49:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:49:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:49:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:49:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:49:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:49:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:49:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:49:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:49:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:49:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:49:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:49:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:49:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:49:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:49:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:49:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:49:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:49:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:49:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:49:59 IQ138000 NetworkManager[403]: <warn>  [1760194199.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:49:59 IQ138000 NetworkManager[403]: <info>  [1760194199.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:49:59 IQ138000 NetworkManager[403]: <warn>  [1760194199.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:49:59 IQ138000 NetworkManager[403]: <info>  [1760194199.0274] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:49:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/363
Oct 11 14:49:59 IQ138000 NetworkManager[403]: <info>  [1760194199.0732] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:49:59 IQ138000 NetworkManager[403]: <info>  [1760194199.0734] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:50:05 IQ138000 NetworkManager[403]: <info>  [1760194205.3651] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 14:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:20 IQ138000 wb-watchdog[21443]: [INFO] Interval #514 started. Waiting up to 60 seconds for error...
Oct 11 14:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:50:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:50:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:50:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:50:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:50:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:50:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:50:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:50:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:50:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:50:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:50:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:50:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:50:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:50:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:50:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:50:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:50:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:50:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:50:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:50:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:50:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:50:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:50:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:50:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:50:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:50:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:50:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:50:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:50:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:50:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:50:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:50:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:50:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:50:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:50:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:50:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:50:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:50:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:50:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:50:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:50:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:50:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:50:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:50:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:50:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:50:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:50:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:50:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:50:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:50:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:50:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:50:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:50:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:50:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:50:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:50:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:50:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:50:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:50:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:50:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:50:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:50:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:50:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:50:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:50:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:50:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:50:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:50:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:50:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:50:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:50:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:50:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:50:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:50:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:50:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:50:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:50:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:50:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:50:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:50:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:50:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2647] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2653] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2659] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2741] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2759] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2761] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2873] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2904] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2926] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2930] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2931] Config: added 'scan_ssid' value '1'
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2932] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2936] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.2938] Config: added 'psk' value '<hidden>'
Oct 11 14:51:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/364
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.3692] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:51:00 IQ138000 NetworkManager[403]: <info>  [1760194260.3695] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:51:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:20 IQ138000 wb-watchdog[22060]: [INFO] Interval #515 started. Waiting up to 60 seconds for error...
Oct 11 14:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:51:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:26 IQ138000 NetworkManager[403]: <warn>  [1760194286.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:51:26 IQ138000 NetworkManager[403]: <info>  [1760194286.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:51:26 IQ138000 NetworkManager[403]: <warn>  [1760194286.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:51:26 IQ138000 NetworkManager[403]: <info>  [1760194286.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:51:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:51:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/364
Oct 11 14:51:26 IQ138000 NetworkManager[403]: <info>  [1760194286.0696] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:51:26 IQ138000 NetworkManager[403]: <info>  [1760194286.0699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:51:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:51:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:51:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:51:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:51:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:51:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:51:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:51:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:51:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:51:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:51:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:51:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:51:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:51:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:51:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:51:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:51:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:51:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:51:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:51:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:51:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:51:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:51:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:51:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:51:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:51:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:51:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:51:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:51:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:51:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:51:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:51:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:51:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:51:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:51:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:51:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:51:26 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:32 IQ138000 NetworkManager[403]: <info>  [1760194292.0364] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:51:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 14:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 14:51:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 14:51:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 14:51:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 14:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:51:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:51:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:51:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:51:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:51:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:51:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:51:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:51:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:51:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:51:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:51:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:51:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:51:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:51:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:51:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:51:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:51:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:51:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:51:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:51:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:51:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:51:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:51:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:51:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:51:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:51:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:51:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:51:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:51:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:51:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:51:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:51:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:51:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:51:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:51:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:51:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:51:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:52:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:52:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:52:20 IQ138000 wb-watchdog[22760]: [INFO] Interval #516 started. Waiting up to 60 seconds for error...
Oct 11 14:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:52:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:52:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:52:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:52:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:52:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:52:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:52:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:52:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:52:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:52:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:52:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:52:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:52:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:52:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:52:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:52:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:52:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:52:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:52:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:52:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:52:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:52:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:52:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:52:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:52:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:52:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:52:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:52:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:52:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:52:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:52:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:52:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:52:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:52:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:52:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:52:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1592] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1603] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1610] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1666] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1692] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1694] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1786] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1808] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1827] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1830] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1831] Config: added 'scan_ssid' value '1'
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1832] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1833] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:52:27 IQ138000 NetworkManager[403]: <info>  [1760194347.1834] Config: added 'psk' value '<hidden>'
Oct 11 14:52:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/365
Oct 11 14:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:52:31 IQ138000 NetworkManager[403]: <info>  [1760194351.2714] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:52:31 IQ138000 NetworkManager[403]: <info>  [1760194351.2716] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:52:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:52:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:52:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:52:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:52 IQ138000 NetworkManager[403]: <warn>  [1760194372.0240] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:52:52 IQ138000 NetworkManager[403]: <info>  [1760194372.0241] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:52:52 IQ138000 NetworkManager[403]: <warn>  [1760194372.0271] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:52:52 IQ138000 NetworkManager[403]: <info>  [1760194372.0285] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:52:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/365
Oct 11 14:52:52 IQ138000 NetworkManager[403]: <info>  [1760194372.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:52:52 IQ138000 NetworkManager[403]: <info>  [1760194372.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:52:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:52:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:52:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:52:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:52:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:52:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:52:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:52:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:52:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:52:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:52:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:52:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:52:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:52:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:52:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:52:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:52:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:52:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:52:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:52:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:52:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:52:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:52:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:52:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:52:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:52:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:52:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:52:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:52:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:52:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:52:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:52:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:52:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:52:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:52:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:52:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:57 IQ138000 NetworkManager[403]: <info>  [1760194377.8875] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:53:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12852 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:53:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:53:20 IQ138000 wb-watchdog[23361]: [INFO] Interval #517 started. Waiting up to 60 seconds for error...
Oct 11 14:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:53:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:53:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:53:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:53:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:53:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:53:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:53:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:53:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:53:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:53:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:53:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:53:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:53:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:53:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:53:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:53:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:53:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:53:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:53:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:53:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:53:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:53:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:53:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:53:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:53:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:53:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:53:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:53:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:53:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:53:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:53:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:53:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:53:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:53:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:53:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:53:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:53:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:53:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L3, row count 7183, limit 7042
Oct 11 14:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:53:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:53:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8200] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8205] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8211] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8267] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8286] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8288] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8371] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8393] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8412] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8415] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8417] Config: added 'scan_ssid' value '1'
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8418] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8419] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.8420] Config: added 'psk' value '<hidden>'
Oct 11 14:53:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/366
Oct 11 14:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.9153] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:53:52 IQ138000 NetworkManager[403]: <info>  [1760194432.9155] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:53:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:53:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:53:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:53:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:53:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:53:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:53:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:53:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:53:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:53:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:53:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:53:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:53:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:53:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:53:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:53:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:53:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:53:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:53:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:53:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:53:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:53:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:53:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:53:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:53:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:53:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:53:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:53:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:53:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:53:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:53:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:53:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:53:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:53:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:53:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:53:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:53:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:53:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:54:18 IQ138000 NetworkManager[403]: <warn>  [1760194458.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:54:18 IQ138000 NetworkManager[403]: <info>  [1760194458.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:54:18 IQ138000 NetworkManager[403]: <warn>  [1760194458.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:54:18 IQ138000 NetworkManager[403]: <info>  [1760194458.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:54:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/366
Oct 11 14:54:18 IQ138000 NetworkManager[403]: <info>  [1760194458.0756] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:54:18 IQ138000 NetworkManager[403]: <info>  [1760194458.0757] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:54:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:54:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:20 IQ138000 wb-watchdog[24084]: [INFO] Interval #518 started. Waiting up to 60 seconds for error...
Oct 11 14:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:24 IQ138000 NetworkManager[403]: <info>  [1760194464.5964] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:54:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:54:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:54:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:54:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:54:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:54:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:54:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:54:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:54:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:54:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:54:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:54:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:54:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:54:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:54:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:54:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:54:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:54:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:54:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:54:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:54:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:54:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:54:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:54:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:54:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:54:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:54:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:54:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:54:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:54:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:54:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:54:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:54:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:54:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:54:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:54:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:54:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:54:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:54:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:54:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:54:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L2, row count 7183, limit 7042
Oct 11 14:54:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:54:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:54:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:54:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:54:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:54:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:54:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:54:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:54:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:54:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:54:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:54:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:54:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:54:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:54:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:54:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:54:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:54:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:54:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:54:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:54:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:54:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:54:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:54:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:54:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:54:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:54:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:54:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:54:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:54:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:54:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:54:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:54:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:54:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:54:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:54:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:54:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:01 IQ138000 CRON[24461]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 14:55:01 IQ138000 CRON[24465]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 14:55:01 IQ138000 CRON[24461]: pam_unix(cron:session): session closed for user root
Oct 11 14:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:55:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4500] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4505] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4512] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4572] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4634] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4636] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4857] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4904] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4957] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4960] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4962] Config: added 'scan_ssid' value '1'
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4963] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4964] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.4965] Config: added 'psk' value '<hidden>'
Oct 11 14:55:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/367
Oct 11 14:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.5646] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:55:19 IQ138000 NetworkManager[403]: <info>  [1760194519.5650] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:20 IQ138000 wb-watchdog[24711]: [INFO] Interval #519 started. Waiting up to 60 seconds for error...
Oct 11 14:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 14:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 14:55:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 14:55:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 14:55:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 14:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:26 IQ138000 npm[3801]: [2025-10-11 14:55:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.45,"last_seen":1760194526985,"linkquality":76,"power_outage_count":48745,"temperature":26.79,"voltage":3025}'
Oct 11 14:55:27 IQ138000 npm[3801]: [2025-10-11 14:55:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":36.02,"last_seen":1760194526996,"linkquality":76,"power_outage_count":48745,"temperature":26.79,"voltage":3025}'
Oct 11 14:55:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:55:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:55:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:55:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:55:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:55:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:55:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:55:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:55:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:55:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:55:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:55:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:55:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:55:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:55:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:55:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:55:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:55:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:55:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:55:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:55:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:55:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:55:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:55:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:55:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:55:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:55:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:55:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:55:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:55:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:55:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:55:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:55:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:55:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:55:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:55:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:55:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:55:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:55:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:45 IQ138000 NetworkManager[403]: <warn>  [1760194545.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:55:45 IQ138000 NetworkManager[403]: <info>  [1760194545.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:45 IQ138000 NetworkManager[403]: <warn>  [1760194545.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:55:45 IQ138000 NetworkManager[403]: <info>  [1760194545.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:55:45 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:55:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/367
Oct 11 14:55:45 IQ138000 NetworkManager[403]: <info>  [1760194545.0705] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:55:45 IQ138000 NetworkManager[403]: <info>  [1760194545.0707] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:45 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 14:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:55:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:55:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:51 IQ138000 NetworkManager[403]: <info>  [1760194551.1958] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:55:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:55:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:55:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:55:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:55:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:55:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:55:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:55:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:55:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:55:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:55:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:55:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:55:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:55:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:55:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:55:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:55:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:55:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:55:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:55:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:55:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:55:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:55:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:55:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:55:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:55:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:55:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:55:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:55:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:55:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:55:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:55:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:55:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:55:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:55:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:55:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:20 IQ138000 wb-watchdog[25394]: [INFO] Interval #520 started. Waiting up to 60 seconds for error...
Oct 11 14:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:56:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:56:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 14:56:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:56:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:56:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:56:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:56:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:56:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:56:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:56:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:56:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:56:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:56:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:56:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:56:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:56:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:56:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:56:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:56:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:56:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:56:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:56:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:56:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:56:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:56:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:56:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:56:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:56:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:56:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:56:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:56:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:56:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:56:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:56:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:56:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:56:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:56:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:56:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:56:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:56:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:56:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:56:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:56:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.2831] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.2836] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.2842] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.2937] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.2969] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.2979] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3090] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3111] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3147] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3151] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3152] Config: added 'scan_ssid' value '1'
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3153] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3158] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:56:46 IQ138000 NetworkManager[403]: <info>  [1760194606.3159] Config: added 'psk' value '<hidden>'
Oct 11 14:56:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/368
Oct 11 14:56:50 IQ138000 NetworkManager[403]: <info>  [1760194610.3928] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:56:50 IQ138000 NetworkManager[403]: <info>  [1760194610.3930] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:56:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:56:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:56:57 IQ138000 npm[3801]: [2025-10-11 14:56:57] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":36.02,"last_seen":1760194617544,"linkquality":87,"power_outage_count":48745,"temperature":26.81,"voltage":3025}'
Oct 11 14:56:57 IQ138000 npm[3801]: [2025-10-11 14:56:57] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":42.03,"last_seen":1760194617558,"linkquality":91,"power_outage_count":48745,"temperature":26.81,"voltage":3025}'
Oct 11 14:56:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:56:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:56:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:56:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:56:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:56:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:56:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:56:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:56:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:56:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:56:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:56:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:56:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:56:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:56:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:56:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:56:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:56:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:56:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:56:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:56:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:56:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:56:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:56:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:56:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:56:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:56:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:56:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:56:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:56:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:56:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:56:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:56:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:56:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:56:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:56:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:56:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:12 IQ138000 NetworkManager[403]: <warn>  [1760194632.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:57:12 IQ138000 NetworkManager[403]: <info>  [1760194632.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:57:12 IQ138000 NetworkManager[403]: <warn>  [1760194632.0258] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:57:12 IQ138000 NetworkManager[403]: <info>  [1760194632.0543] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:57:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/368
Oct 11 14:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:57:12 IQ138000 NetworkManager[403]: <info>  [1760194632.1909] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:57:12 IQ138000 NetworkManager[403]: <info>  [1760194632.1911] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 14:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 14:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:57:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:18 IQ138000 NetworkManager[403]: <info>  [1760194638.0254] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:57:20 IQ138000 wb-watchdog[26024]: [INFO] Interval #521 started. Waiting up to 60 seconds for error...
Oct 11 14:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:57:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:57:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:57:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:57:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:57:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:57:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:57:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:57:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:57:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:57:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:57:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:57:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:57:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:57:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:57:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:57:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:57:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:57:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:57:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:57:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:57:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:57:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:57:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:57:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:57:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:57:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:57:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:57:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:57:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:57:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:57:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:57:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:57:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:57:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:57:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:57:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:57:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:57:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:57:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:57:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:57:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:57:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:57:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:57:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:57:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:57:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:57:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:57:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:57:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:57:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:57:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:57:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:57:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:57:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:57:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:57:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:57:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:57:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:57:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:57:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:57:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:57:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:57:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:57:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:57:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:57:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:57:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:57:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:57:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:57:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:57:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:57:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:57:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:57:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:57:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:57:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:57:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:58:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:58:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2193] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2199] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2205] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2277] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2300] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2303] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2419] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2452] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2488] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2502] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2504] Config: added 'scan_ssid' value '1'
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2505] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2507] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.2508] Config: added 'psk' value '<hidden>'
Oct 11 14:58:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/369
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.3271] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:58:13 IQ138000 NetworkManager[403]: <info>  [1760194693.3280] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 14:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:20 IQ138000 wb-watchdog[26712]: [INFO] Interval #522 started. Waiting up to 60 seconds for error...
Oct 11 14:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:58:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:58:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:58:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:58:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:58:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:58:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:58:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:58:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:58:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:58:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:58:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:58:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:58:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:58:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:58:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:58:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:58:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:58:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:58:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:58:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:58:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:58:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:58:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:58:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:58:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:58:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:58:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:58:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:58:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:58:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:58:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:58:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:58:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:58:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:58:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9226 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:38 IQ138000 NetworkManager[403]: <warn>  [1760194718.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 14:58:38 IQ138000 NetworkManager[403]: <info>  [1760194718.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 14:58:38 IQ138000 NetworkManager[403]: <warn>  [1760194718.0282] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 14:58:38 IQ138000 NetworkManager[403]: <info>  [1760194718.0335] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 14:58:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/369
Oct 11 14:58:38 IQ138000 NetworkManager[403]: <info>  [1760194718.0845] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 14:58:38 IQ138000 NetworkManager[403]: <info>  [1760194718.0847] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 14:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 14:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:58:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:58:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:58:43 IQ138000 NetworkManager[403]: <info>  [1760194723.9903] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 14:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:58:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:58:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:58:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:58:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:58:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:58:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:58:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:58:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:58:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:58:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:58:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:58:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:58:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:58:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:58:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:58:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:58:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:58:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:58:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:58:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:58:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:58:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:58:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:58:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:58:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:58:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:58:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:58:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:58:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:58:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:58:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:58:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:58:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:58:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:58:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:58:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:58:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:58:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:58:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:59:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:59:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 14:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:59:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:59:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:20 IQ138000 wb-watchdog[27329]: [INFO] Interval #523 started. Waiting up to 60 seconds for error...
Oct 11 14:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 14:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:59:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 14:59:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 14:59:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 14:59:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 14:59:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 14:59:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 14:59:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 14:59:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 14:59:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 14:59:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 14:59:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 14:59:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 14:59:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 14:59:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 14:59:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 14:59:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 14:59:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 14:59:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 14:59:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 14:59:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 14:59:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 14:59:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 14:59:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:59:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 14:59:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 14:59:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 14:59:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:59:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 14:59:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 14:59:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 14:59:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 14:59:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 14:59:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 14:59:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 14:59:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 14:59:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 14:59:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 14:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9485] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9504] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9511] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9574] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9591] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9593] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9672] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9691] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9708] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9711] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9712] Config: added 'scan_ssid' value '1'
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9713] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9714] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 14:59:38 IQ138000 NetworkManager[403]: <info>  [1760194778.9715] Config: added 'psk' value '<hidden>'
Oct 11 14:59:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/370
Oct 11 14:59:39 IQ138000 NetworkManager[403]: <info>  [1760194779.0465] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 14:59:39 IQ138000 NetworkManager[403]: <info>  [1760194779.0467] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 14:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 14:59:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 14:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5394 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 14:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 14:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 14:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 14:59:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 14:59:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 14:59:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:00:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:00:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:00:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:00:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:00:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:00:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:00:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:00:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:00:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:00:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:00:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:00:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:00:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:00:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:00:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:00:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:00:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:00:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:00:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:00:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:00:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:00:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:00:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:00:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:00:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:00:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:00:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:00:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:00:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:00:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:00:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:00:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:00:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:00:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:00:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:00:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:04 IQ138000 NetworkManager[403]: <warn>  [1760194804.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:00:04 IQ138000 NetworkManager[403]: <info>  [1760194804.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:00:04 IQ138000 NetworkManager[403]: <warn>  [1760194804.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:00:04 IQ138000 NetworkManager[403]: <info>  [1760194804.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:00:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/370
Oct 11 15:00:04 IQ138000 NetworkManager[403]: <info>  [1760194804.0623] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:00:04 IQ138000 NetworkManager[403]: <info>  [1760194804.0625] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:00:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:00:09 IQ138000 NetworkManager[403]: <info>  [1760194809.6895] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:20 IQ138000 wb-watchdog[28044]: [INFO] Interval #524 started. Waiting up to 60 seconds for error...
Oct 11 15:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:00:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:00:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:00:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:00:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:00:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:00:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:00:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:00:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:00:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:00:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:00:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:00:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:00:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:00:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:00:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:00:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:00:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:00:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:00:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:00:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:00:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:00:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:00:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:00:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:00:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:00:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:00:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:00:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:00:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:00:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:00:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:00:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:00:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:00:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:00:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:00:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:00:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:00:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:00:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:00:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:00:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:00:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:01:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:01:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:01:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:01:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:01:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:01:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:01:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:01:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:01:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:01:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:01:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:01:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:01:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:01:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:01:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:01:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:01:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:01:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:01:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:01:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:01:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:01:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:01:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:01:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:01:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:01:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:01:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:01:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:01:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:01:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:01:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:01:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:01:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:01:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:01:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:01:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:01:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.6979] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7001] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7008] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7061] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7079] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7081] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7201] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7221] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7271] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7278] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7279] Config: added 'scan_ssid' value '1'
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7280] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7281] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.7282] Config: added 'psk' value '<hidden>'
Oct 11 15:01:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/371
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.8028] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:01:04 IQ138000 NetworkManager[403]: <info>  [1760194864.8031] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:01:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:01:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:20 IQ138000 wb-watchdog[28647]: [INFO] Interval #525 started. Waiting up to 60 seconds for error...
Oct 11 15:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:01:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:30 IQ138000 NetworkManager[403]: <warn>  [1760194890.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:01:30 IQ138000 NetworkManager[403]: <info>  [1760194890.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:01:30 IQ138000 NetworkManager[403]: <warn>  [1760194890.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:01:30 IQ138000 NetworkManager[403]: <info>  [1760194890.0425] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:01:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/371
Oct 11 15:01:30 IQ138000 NetworkManager[403]: <info>  [1760194890.0904] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:01:30 IQ138000 NetworkManager[403]: <info>  [1760194890.0905] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:01:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:01:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:01:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:01:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:01:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:01:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:01:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:01:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:01:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:01:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:01:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:01:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:01:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:01:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:01:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:01:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:01:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:01:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:01:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:01:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:01:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:01:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:01:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:01:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:01:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:01:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:01:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:01:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:01:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:01:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:01:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:01:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:01:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:01:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:01:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:01:36 IQ138000 NetworkManager[403]: <info>  [1760194896.3834] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:01:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L3, row count 7183, limit 7042
Oct 11 15:01:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L1, row count 7183, limit 7042
Oct 11 15:01:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L2, row count 7183, limit 7042
Oct 11 15:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:01:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:01:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:42 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:01:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:01:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:02:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:02:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:02:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:02:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:02:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:02:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:02:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:02:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:02:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:02:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:02:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:02:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:02:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:02:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:02:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:02:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:02:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:02:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:02:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:02:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:02:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:02:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:02:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:02:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:02:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:02:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:02:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:02:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:02:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:02:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:02:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:02:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:02:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:02:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:02:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:02:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:02:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:02:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:02:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:02:20 IQ138000 wb-watchdog[29345]: [INFO] Interval #526 started. Waiting up to 60 seconds for error...
Oct 11 15:02:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:02:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:02:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:02:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:02:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:02:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:02:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:02:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:02:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:02:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:02:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:02:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:02:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:02:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:02:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:02:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:02:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:02:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:02:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:02:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:02:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:02:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:02:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:02:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:02:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:02:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:02:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:02:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:02:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:02:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:02:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:02:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:02:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:02:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:02:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:02:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:02:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:02:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.4991] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.4996] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5008] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5070] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5089] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5090] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5173] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5191] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5211] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5214] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5215] Config: added 'scan_ssid' value '1'
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5216] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5218] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5218] Config: added 'psk' value '<hidden>'
Oct 11 15:02:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/372
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5881] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:02:31 IQ138000 NetworkManager[403]: <info>  [1760194951.5895] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:02:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:02:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:02:57 IQ138000 NetworkManager[403]: <warn>  [1760194977.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:02:57 IQ138000 NetworkManager[403]: <info>  [1760194977.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:02:57 IQ138000 NetworkManager[403]: <warn>  [1760194977.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:02:57 IQ138000 NetworkManager[403]: <info>  [1760194977.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:02:57 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:02:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/372
Oct 11 15:02:57 IQ138000 NetworkManager[403]: <info>  [1760194977.0849] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:02:57 IQ138000 NetworkManager[403]: <info>  [1760194977.0851] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:02:57 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:02:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:02:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:03:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:03:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:03:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:03:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:03:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:03:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:03:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:03:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:03:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:03:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:03:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:03:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:03:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:03:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:03:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:03:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:03:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:03:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:03:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:03:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:03:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:03:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:03:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:03:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:03:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:03:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:03:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:03:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:03:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:03:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:03:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:03:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:03:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:03:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:03:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:03:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:03:03 IQ138000 NetworkManager[403]: <info>  [1760194983.2777] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:03:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:03:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:03:20 IQ138000 wb-watchdog[29961]: [INFO] Interval #527 started. Waiting up to 60 seconds for error...
Oct 11 15:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:03:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:03:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:03:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:03:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:03:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:03:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:03:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:03:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:03:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:03:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:03:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:03:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:03:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:03:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:03:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:03:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:03:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:03:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:03:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:03:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:03:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:03:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:03:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:03:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:03:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:03:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:03:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:03:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:03:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:03:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:03:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:03:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:03:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:03:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:03:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:03:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:03:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:03:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3012] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3038] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3047] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3143] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3162] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3164] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3296] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3337] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3370] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3374] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3376] Config: added 'scan_ssid' value '1'
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3376] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3378] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:03:58 IQ138000 NetworkManager[403]: <info>  [1760195038.3378] Config: added 'psk' value '<hidden>'
Oct 11 15:03:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/373
Oct 11 15:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:04:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:04:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:04:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:04:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:04:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:04:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:04:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:04:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:04:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:04:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:04:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:04:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:04:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:04:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:04:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:04:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:04:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:04:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:04:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:04:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:04:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:04:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:04:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:04:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:04:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:04:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:04:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:04:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:04:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:04:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:04:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:04:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:04:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:04:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:04:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:04:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:04:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:04:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:04:02 IQ138000 NetworkManager[403]: <info>  [1760195042.4081] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:04:02 IQ138000 NetworkManager[403]: <info>  [1760195042.4083] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:04:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:04:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:20 IQ138000 wb-watchdog[30666]: [INFO] Interval #528 started. Waiting up to 60 seconds for error...
Oct 11 15:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:24 IQ138000 NetworkManager[403]: <warn>  [1760195064.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:04:24 IQ138000 NetworkManager[403]: <info>  [1760195064.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:04:24 IQ138000 NetworkManager[403]: <warn>  [1760195064.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:04:24 IQ138000 NetworkManager[403]: <info>  [1760195064.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:04:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/373
Oct 11 15:04:24 IQ138000 NetworkManager[403]: <info>  [1760195064.0719] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:04:24 IQ138000 NetworkManager[403]: <info>  [1760195064.0721] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:30 IQ138000 NetworkManager[403]: <info>  [1760195070.0868] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:04:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:04:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:04:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:04:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:04:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:04:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:04:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:04:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:04:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:04:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:04:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:04:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:04:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:04:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:04:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:04:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:04:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:04:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:04:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:04:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:04:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:04:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:04:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:04:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:04:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:04:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:04:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:04:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:04:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:04:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:04:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:04:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:04:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:04:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:04:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:04:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:04:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:04:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:04:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:01 IQ138000 CRON[31038]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:05:01 IQ138000 CRON[31042]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 15:05:01 IQ138000 CRON[31038]: pam_unix(cron:session): session closed for user root
Oct 11 15:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:05:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:05:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:05:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:05:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:05:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:05:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:05:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:05:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:05:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:05:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:05:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:05:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:05:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:05:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:05:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:05:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:05:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:05:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:05:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:05:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:05:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:05:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:05:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:05:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:05:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:05:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:05:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:05:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:05:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:05:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:05:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:05:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:05:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:05:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:05:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:05:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:05:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17156 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:05:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:20 IQ138000 wb-watchdog[31286]: [INFO] Interval #529 started. Waiting up to 60 seconds for error...
Oct 11 15:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.2859] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.2864] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.2869] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.2924] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.2942] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.2944] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3019] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3039] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3057] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3062] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3064] Config: added 'scan_ssid' value '1'
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3065] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3067] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3068] Config: added 'psk' value '<hidden>'
Oct 11 15:05:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/374
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3819] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:05:25 IQ138000 NetworkManager[403]: <info>  [1760195125.3821] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:05:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:05:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:05:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:05:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:05:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:05:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:05:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:05:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:05:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:05:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:05:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:05:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:05:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:05:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:05:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:05:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:05:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:05:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:05:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:05:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:05:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:05:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:05:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:05:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:05:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:05:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:05:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:05:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:05:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:05:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:05:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:05:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:05:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:05:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:05:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:05:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L2, row count 7183, limit 7042
Oct 11 15:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:05:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:51 IQ138000 NetworkManager[403]: <warn>  [1760195151.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:05:51 IQ138000 NetworkManager[403]: <info>  [1760195151.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:05:51 IQ138000 NetworkManager[403]: <warn>  [1760195151.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:05:51 IQ138000 NetworkManager[403]: <info>  [1760195151.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:05:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:05:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/374
Oct 11 15:05:51 IQ138000 NetworkManager[403]: <info>  [1760195151.0694] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:05:51 IQ138000 NetworkManager[403]: <info>  [1760195151.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:05:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:05:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:05:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:05:57 IQ138000 NetworkManager[403]: <info>  [1760195157.0413] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:06:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:06:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:06:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:06:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:06:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:06:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:06:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:06:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:06:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:06:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:06:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:06:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:06:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:06:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:06:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:06:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:06:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:06:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:06:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:06:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:06:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:06:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:06:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:06:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:06:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:06:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:06:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:06:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:06:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:06:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:06:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:06:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:06:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:06:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:06:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:06:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:06:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:06:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8980 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:06:20 IQ138000 wb-watchdog[31991]: [INFO] Interval #530 started. Waiting up to 60 seconds for error...
Oct 11 15:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:06:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:06:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:06:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:06:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:06:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:06:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:06:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:06:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:06:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:06:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:06:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:06:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:06:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:06:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:06:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:06:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:06:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:06:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:06:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:06:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:06:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:06:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:06:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:06:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:06:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:06:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:06:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:06:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:06:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:06:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:06:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:06:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:06:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:06:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:06:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:06:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:06:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:06:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:06:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:06:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:06:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:06:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:06:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1427] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1431] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1436] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1493] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1513] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1515] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1594] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1624] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1655] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1665] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1666] Config: added 'scan_ssid' value '1'
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1667] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1669] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:06:52 IQ138000 NetworkManager[403]: <info>  [1760195212.1669] Config: added 'psk' value '<hidden>'
Oct 11 15:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/375
Oct 11 15:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:06:56 IQ138000 NetworkManager[403]: <info>  [1760195216.2533] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:06:56 IQ138000 NetworkManager[403]: <info>  [1760195216.2536] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:07:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:07:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:07:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:07:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:07:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:07:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:07:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:07:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:07:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:07:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:07:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:07:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:07:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:07:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:07:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:07:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:07:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:07:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:07:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:07:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:07:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:07:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:07:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:07:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:07:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:07:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:07:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:07:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:07:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:07:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:07:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:07:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:07:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:07:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:07:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:07:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:07:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:07:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:07:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:17 IQ138000 NetworkManager[403]: <warn>  [1760195237.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:07:17 IQ138000 NetworkManager[403]: <info>  [1760195237.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:07:17 IQ138000 NetworkManager[403]: <warn>  [1760195237.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:07:17 IQ138000 NetworkManager[403]: <info>  [1760195237.0281] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:07:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/375
Oct 11 15:07:17 IQ138000 NetworkManager[403]: <info>  [1760195237.0761] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:07:17 IQ138000 NetworkManager[403]: <info>  [1760195237.0763] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:20 IQ138000 wb-watchdog[32611]: [INFO] Interval #531 started. Waiting up to 60 seconds for error...
Oct 11 15:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:22 IQ138000 NetworkManager[403]: <info>  [1760195242.8916] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:07:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:07:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:07:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:07:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:07:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:07:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:07:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:07:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:07:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:07:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:07:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:07:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:07:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:07:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:07:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:07:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:07:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:07:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:07:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:07:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:07:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:07:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:07:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:07:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:07:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:07:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:07:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:07:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:07:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:07:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:07:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:07:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:07:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:07:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:07:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:07:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:07:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:07:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L2, row count 7183, limit 7042
Oct 11 15:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:07:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:07:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:07:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:01 IQ138000 CRON[620]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:08:01 IQ138000 CRON[624]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 15:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:08:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:08:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:08:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:08:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:08:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:08:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:08:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:08:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:08:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:08:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:08:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:08:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:08:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:08:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:08:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:08:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:08:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:08:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:08:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:08:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:08:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:08:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:08:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:08:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:08:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:08:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:08:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:08:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:08:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:08:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:08:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:08:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:08:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:08:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:08:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:08:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:08:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:08:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:07 IQ138000 sSMTP[629]: Unable to locate mail
Oct 11 15:08:07 IQ138000 cron[629]: sendmail: Cannot open mail:25
Oct 11 15:08:07 IQ138000 sSMTP[629]: Cannot open mail:25
Oct 11 15:08:07 IQ138000 CRON[620]: (root) MAIL (mailed 250 bytes of output but got status 0x0001 from MTA
                                    )
Oct 11 15:08:07 IQ138000 CRON[620]: pam_unix(cron:session): session closed for user root
Oct 11 15:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:08:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:08:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.0862] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.0870] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.0879] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.0949] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.0980] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.0990] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1094] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1120] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1151] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1155] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1156] Config: added 'scan_ssid' value '1'
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1157] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1158] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1159] Config: added 'psk' value '<hidden>'
Oct 11 15:08:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/376
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1955] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:08:18 IQ138000 NetworkManager[403]: <info>  [1760195298.1957] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:20 IQ138000 wb-watchdog[864]: [INFO] Interval #532 started. Waiting up to 60 seconds for error...
Oct 11 15:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:08:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:08:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:08:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:08:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:08:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:08:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:08:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:08:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:08:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:08:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:08:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:08:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:08:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:08:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:08:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:08:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:08:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:08:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:08:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:08:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:08:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:08:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:08:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:08:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:08:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:08:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:08:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:08:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:08:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:08:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:08:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:08:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:08:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:08:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:08:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:08:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:08:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:08:43 IQ138000 NetworkManager[403]: <warn>  [1760195323.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:08:43 IQ138000 NetworkManager[403]: <info>  [1760195323.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:08:43 IQ138000 NetworkManager[403]: <warn>  [1760195323.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:08:43 IQ138000 NetworkManager[403]: <info>  [1760195323.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:08:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/376
Oct 11 15:08:43 IQ138000 NetworkManager[403]: <info>  [1760195323.0774] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:08:43 IQ138000 NetworkManager[403]: <info>  [1760195323.0776] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:08:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:08:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:08:48 IQ138000 NetworkManager[403]: <info>  [1760195328.7836] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:08:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:09:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:09:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:09:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:09:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:09:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:09:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:09:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:09:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:09:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:09:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:09:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:09:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:09:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:09:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:09:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:09:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:09:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:09:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:09:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:09:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:09:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:09:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:09:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:09:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:09:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:09:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:09:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:09:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:09:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:09:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:09:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:09:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:09:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:09:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:09:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:09:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:09:20 IQ138000 wb-watchdog[1491]: [INFO] Interval #533 started. Waiting up to 60 seconds for error...
Oct 11 15:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:09:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:09:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:09:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:09:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:09:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:09:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:09:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:09:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:09:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:09:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:09:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:09:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:09:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:09:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:09:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:09:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:09:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:09:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:09:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:09:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:09:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:09:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:09:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:09:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:09:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:09:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:09:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:09:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:09:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:09:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:09:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:09:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:09:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:09:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:09:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:09:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:09:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:09:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:09:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:09:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:09:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:09:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.7953] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.7961] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.7968] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8064] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8093] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8101] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8196] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8225] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8244] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8249] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8250] Config: added 'scan_ssid' value '1'
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8251] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8252] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8253] Config: added 'psk' value '<hidden>'
Oct 11 15:09:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/377
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8986] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:09:43 IQ138000 NetworkManager[403]: <info>  [1760195383.8988] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:09:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:09:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:10:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:10:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:10:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:10:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:10:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:10:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:10:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:10:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:10:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:10:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:10:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:10:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:10:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:10:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:10:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:10:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:10:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:10:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:10:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:10:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:10:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:10:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:10:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:10:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:10:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:10:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:10:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:10:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:10:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:10:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:10:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:10:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:10:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:10:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:10:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:10:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:10:09 IQ138000 NetworkManager[403]: <warn>  [1760195409.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:10:09 IQ138000 NetworkManager[403]: <info>  [1760195409.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:10:09 IQ138000 NetworkManager[403]: <warn>  [1760195409.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:10:09 IQ138000 NetworkManager[403]: <info>  [1760195409.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:10:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/377
Oct 11 15:10:09 IQ138000 NetworkManager[403]: <info>  [1760195409.0696] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:10:09 IQ138000 NetworkManager[403]: <info>  [1760195409.0699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:10:15 IQ138000 NetworkManager[403]: <info>  [1760195415.5280] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:10:20 IQ138000 wb-watchdog[2224]: [INFO] Interval #534 started. Waiting up to 60 seconds for error...
Oct 11 15:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:10:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:10:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:10:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:10:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:10:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:10:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:10:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:10:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:10:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:10:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:10:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:10:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:10:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:10:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:10:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:10:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:10:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:10:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:10:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:10:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:10:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:10:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:10:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:10:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:10:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:10:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:10:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:10:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:10:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:10:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:10:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:10:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:10:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:10:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:10:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:10:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:10:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:10:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:10:35 IQ138000 npm[3801]: [2025-10-11 15:10:35] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.91,"last_seen":1760195435742,"linkquality":109,"power_outage_count":48745,"temperature":26.34,"voltage":3025}'
Oct 11 15:10:35 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760195615787,"cmd_timestamp_ms":1760195435787,"source":"regulation"}
Oct 11 15:10:35 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[8]]},"expiration_stamp_ms":1760195615787,"cmd_timestamp_ms":1760195435787,"source":"regulation"}
Oct 11 15:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:36 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[0]
Oct 11 15:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:41 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,8}[1]
Oct 11 15:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:10:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:10:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:10:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:10:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L2, row count 7183, limit 7042
Oct 11 15:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:11:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:11:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:11:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:11:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:11:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:11:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:11:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:11:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:11:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:11:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:11:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:11:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:11:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:11:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:11:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:11:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:11:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:11:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:11:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:11:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:11:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:11:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:11:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:11:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:11:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:11:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:11:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:11:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:11:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:11:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:11:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:11:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:11:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:11:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:11:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:11:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6118] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6123] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6129] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6180] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6196] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6197] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6285] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6307] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6325] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6329] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6330] Config: added 'scan_ssid' value '1'
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6331] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6333] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.6333] Config: added 'psk' value '<hidden>'
Oct 11 15:11:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/378
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.7080] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:11:10 IQ138000 NetworkManager[403]: <info>  [1760195470.7082] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:20 IQ138000 wb-watchdog[2882]: [INFO] Interval #535 started. Waiting up to 60 seconds for error...
Oct 11 15:11:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:11:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:11:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:11:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:11:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:11:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:11:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:11:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:11:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:11:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:11:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:11:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:11:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:11:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:11:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:11:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:11:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:11:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:11:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:11:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:11:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:11:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:11:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:11:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:11:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:11:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:11:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:11:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:11:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:11:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:11:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:11:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:11:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:11:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:11:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:11:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:11:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:11:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:11:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:11:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:11:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:36 IQ138000 NetworkManager[403]: <warn>  [1760195496.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:11:36 IQ138000 NetworkManager[403]: <info>  [1760195496.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:11:36 IQ138000 NetworkManager[403]: <warn>  [1760195496.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:11:36 IQ138000 NetworkManager[403]: <info>  [1760195496.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:11:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/378
Oct 11 15:11:36 IQ138000 NetworkManager[403]: <info>  [1760195496.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:11:36 IQ138000 NetworkManager[403]: <info>  [1760195496.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L3, row count 7183, limit 7042
Oct 11 15:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:42 IQ138000 NetworkManager[403]: <info>  [1760195502.4456] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:11:48 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:11:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:11:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:12:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:12:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:12:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:12:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:12:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:12:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:12:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:12:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:12:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:12:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:12:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:12:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:12:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:12:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:12:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:12:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:12:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:12:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:12:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:12:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:12:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:12:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:12:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:12:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:12:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:12:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:12:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:12:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:12:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:12:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:12:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:12:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:12:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:12:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:12:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:20 IQ138000 wb-watchdog[3605]: [INFO] Interval #536 started. Waiting up to 60 seconds for error...
Oct 11 15:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:12:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:12:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:12:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:12:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:12:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:12:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:12:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:12:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:12:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:12:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:12:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:12:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:12:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:12:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:12:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:12:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:12:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:12:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:12:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:12:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:12:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:12:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:12:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:12:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:12:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:12:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:12:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:12:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:12:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:12:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:12:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:12:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:12:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:12:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:12:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:12:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:12:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:12:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4114] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4202] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4226] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4358] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4408] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4424] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4564] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4611] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4636] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4641] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4642] Config: added 'scan_ssid' value '1'
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4643] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4645] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.4645] Config: added 'psk' value '<hidden>'
Oct 11 15:12:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/379
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.5524] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:12:37 IQ138000 NetworkManager[403]: <info>  [1760195557.5526] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:12:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:12:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L2, row count 7183, limit 7042
Oct 11 15:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L2, row count 7183, limit 7042
Oct 11 15:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L1, row count 7183, limit 7042
Oct 11 15:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:13:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:03 IQ138000 NetworkManager[403]: <warn>  [1760195583.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:13:03 IQ138000 NetworkManager[403]: <info>  [1760195583.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:13:03 IQ138000 NetworkManager[403]: <warn>  [1760195583.0236] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:13:03 IQ138000 NetworkManager[403]: <info>  [1760195583.0249] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:13:03 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:13:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/379
Oct 11 15:13:03 IQ138000 NetworkManager[403]: <info>  [1760195583.0754] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:13:03 IQ138000 NetworkManager[403]: <info>  [1760195583.0756] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:03 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:13:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:13:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:13:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:13:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:13:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:13:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:13:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:13:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:13:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:13:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:13:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:13:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:13:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:13:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:13:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:13:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:13:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:13:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:13:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:13:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:13:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:13:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:13:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:13:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:13:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:13:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:13:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:13:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:13:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:13:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:13:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:13:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:13:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:13:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:13:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:13:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:09 IQ138000 NetworkManager[403]: <info>  [1760195589.1688] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:13:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:13:20 IQ138000 wb-watchdog[4237]: [INFO] Interval #537 started. Waiting up to 60 seconds for error...
Oct 11 15:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:13:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:13:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:13:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:13:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:13:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:13:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:13:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:13:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:13:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:13:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:13:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:13:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:13:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:13:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:13:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:13:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:13:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:13:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:13:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:13:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:13:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:13:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:13:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:13:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:13:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:13:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:13:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:13:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:13:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:13:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:13:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:13:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:13:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:13:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:13:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:13:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:13:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:13:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 5, row count 7183, limit 7042
Oct 11 15:13:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 2, row count 7183, limit 7042
Oct 11 15:13:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 6, row count 7183, limit 7042
Oct 11 15:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:13:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:13:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2290] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2297] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2306] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2415] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2434] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2436] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2557] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2586] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2615] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2631] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2639] Config: added 'scan_ssid' value '1'
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2641] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2642] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:14:04 IQ138000 NetworkManager[403]: <info>  [1760195644.2644] Config: added 'psk' value '<hidden>'
Oct 11 15:14:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/380
Oct 11 15:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:14:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:14:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:14:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:14:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:14:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:14:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:14:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:14:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:14:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:14:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:14:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:14:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:14:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:14:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:14:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:14:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:14:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:14:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:14:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:14:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:14:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:14:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:14:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:14:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:14:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:14:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:14:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:14:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:14:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:14:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:14:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:14:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:14:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:14:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:14:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:14:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:14:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:14:07 IQ138000 NetworkManager[403]: <info>  [1760195647.3462] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:14:07 IQ138000 NetworkManager[403]: <info>  [1760195647.3465] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:14:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:14:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:20 IQ138000 wb-watchdog[4966]: [INFO] Interval #538 started. Waiting up to 60 seconds for error...
Oct 11 15:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:14:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:14:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:14:29 IQ138000 NetworkManager[403]: <warn>  [1760195669.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:14:29 IQ138000 NetworkManager[403]: <info>  [1760195669.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:14:29 IQ138000 NetworkManager[403]: <warn>  [1760195669.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:14:29 IQ138000 NetworkManager[403]: <info>  [1760195669.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:14:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/380
Oct 11 15:14:29 IQ138000 NetworkManager[403]: <info>  [1760195669.0641] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:14:29 IQ138000 NetworkManager[403]: <info>  [1760195669.0643] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:14:34 IQ138000 NetworkManager[403]: <info>  [1760195674.9164] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:14:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:14:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:14:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:14:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:14:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:14:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:14:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:14:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:14:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:14:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:14:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:14:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:14:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:14:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:14:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:14:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:14:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:14:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:14:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:14:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:14:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:14:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:14:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:14:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:14:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:14:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:14:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:14:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:14:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:14:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:14:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:14:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:14:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:14:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:14:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:14:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:14:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:14:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8736 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:14:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L1, row count 7183, limit 7042
Oct 11 15:14:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L2, row count 7183, limit 7042
Oct 11 15:14:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L1, row count 7183, limit 7042
Oct 11 15:14:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L3, row count 7183, limit 7042
Oct 11 15:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:15:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:15:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:15:01 IQ138000 CRON[5336]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:15:01 IQ138000 CRON[5340]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 15:15:01 IQ138000 CRON[5336]: pam_unix(cron:session): session closed for user root
Oct 11 15:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:15:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:15:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:15:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:15:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:15:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:15:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:15:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:15:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:15:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:15:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:15:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:15:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:15:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:15:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:15:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:15:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:15:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:15:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:15:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:15:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:15:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:15:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:15:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:15:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:15:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:15:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:15:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:15:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:15:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:15:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:15:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:15:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:15:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:15:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:15:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:15:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:15:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:15:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:15:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:15:20 IQ138000 wb-watchdog[5581]: [INFO] Interval #539 started. Waiting up to 60 seconds for error...
Oct 11 15:15:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:27 IQ138000 npm[3801]: [2025-10-11 15:15:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.91,"last_seen":1760195727596,"linkquality":105,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 15:15:27 IQ138000 npm[3801]: [2025-10-11 15:15:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":48.2,"last_seen":1760195727608,"linkquality":102,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 15:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.8874] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.8883] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.8892] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9002] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9034] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9046] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9144] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9185] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9219] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9222] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9223] Config: added 'scan_ssid' value '1'
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9224] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9226] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9227] Config: added 'psk' value '<hidden>'
Oct 11 15:15:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/381
Oct 11 15:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9938] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:15:29 IQ138000 NetworkManager[403]: <info>  [1760195729.9940] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:15:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:15:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:15:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:15:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:15:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:15:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:15:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:15:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:15:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:15:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:15:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:15:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:15:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:15:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:15:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:15:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:15:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:15:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:15:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:15:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:15:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:15:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:15:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:15:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:15:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:15:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:15:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:15:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:15:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:15:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:15:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:15:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:15:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:15:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:15:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:15:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:15:55 IQ138000 NetworkManager[403]: <warn>  [1760195755.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:15:55 IQ138000 NetworkManager[403]: <info>  [1760195755.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:15:55 IQ138000 NetworkManager[403]: <warn>  [1760195755.0279] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:15:55 IQ138000 NetworkManager[403]: <info>  [1760195755.0293] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:15:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/381
Oct 11 15:15:55 IQ138000 NetworkManager[403]: <info>  [1760195755.0753] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:15:55 IQ138000 NetworkManager[403]: <info>  [1760195755.0761] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:15:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:15:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:15:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:00 IQ138000 NetworkManager[403]: <info>  [1760195760.6383] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 5144 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:16:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:16:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:16:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:16:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:16:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:16:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:16:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:16:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:16:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:16:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:16:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:16:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:16:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:16:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:16:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:16:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:16:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:16:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:16:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:16:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:16:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:16:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:16:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:16:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:16:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:16:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:16:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:16:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:16:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:16:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:16:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:16:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:16:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:16:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:16:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:16:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:16:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:16:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:20 IQ138000 wb-watchdog[6318]: [INFO] Interval #540 started. Waiting up to 60 seconds for error...
Oct 11 15:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:16:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:16:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:16:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:16:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:16:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:16:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:16:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:16:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:16:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:16:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:16:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:16:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:16:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:16:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:16:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:16:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:16:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:16:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:16:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:16:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:16:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:16:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:16:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:16:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:16:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:16:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:16:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:16:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:16:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:16:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:16:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:16:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:16:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:16:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:16:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:16:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:16:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5768] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5773] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5784] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5839] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5855] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5857] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5936] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5956] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5972] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5975] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5976] Config: added 'scan_ssid' value '1'
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5977] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5978] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.5979] Config: added 'psk' value '<hidden>'
Oct 11 15:16:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/382
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.6634] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:16:55 IQ138000 NetworkManager[403]: <info>  [1760195815.6636] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L1, row count 7183, limit 7042
Oct 11 15:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:16:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:16:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:01 IQ138000 CRON[6680]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:17:01 IQ138000 CRON[6685]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 15:17:01 IQ138000 CRON[6680]: pam_unix(cron:session): session closed for user root
Oct 11 15:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:17:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:17:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:17:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:17:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:17:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:17:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:17:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:17:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:17:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:17:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:17:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:17:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:17:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:17:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:17:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:17:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:17:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:17:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:17:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:17:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:17:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:17:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:17:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:17:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:17:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:17:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:17:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:17:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:17:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:17:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:17:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:17:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:17:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:17:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:17:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:17:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:17:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:17:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:17:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:17:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:17:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:17:20 IQ138000 wb-watchdog[6947]: [INFO] Interval #541 started. Waiting up to 60 seconds for error...
Oct 11 15:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:17:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:17:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:17:21 IQ138000 NetworkManager[403]: <warn>  [1760195841.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:17:21 IQ138000 NetworkManager[403]: <info>  [1760195841.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:17:21 IQ138000 NetworkManager[403]: <warn>  [1760195841.0268] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:17:21 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:17:21 IQ138000 NetworkManager[403]: <info>  [1760195841.0285] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:17:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/382
Oct 11 15:17:21 IQ138000 NetworkManager[403]: <info>  [1760195841.0746] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:17:21 IQ138000 NetworkManager[403]: <info>  [1760195841.0748] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:17:21 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:17:27 IQ138000 NetworkManager[403]: <info>  [1760195847.2976] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 1, row count 7183, limit 7042
Oct 11 15:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L3, row count 7183, limit 7042
Oct 11 15:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 4, row count 7183, limit 7042
Oct 11 15:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-mr6c_108/Input 3, row count 7183, limit 7042
Oct 11 15:17:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:17:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:17:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:17:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:17:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:17:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:17:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:17:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:17:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:17:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:17:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:17:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:17:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:17:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:17:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:17:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:17:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:17:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:17:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:17:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:17:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:17:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:17:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:17:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:17:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:17:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:17:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:17:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:17:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:17:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:17:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:17:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:17:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:17:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:17:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:17:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:17:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:17:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:17:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:17:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:18:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:18:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:18:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:18:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:18:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:18:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:18:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:18:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:18:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:18:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:18:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:18:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:18:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:18:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:18:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:18:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:18:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:18:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:18:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:18:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:18:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:18:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:18:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:18:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:18:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:18:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:18:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:18:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:18:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:18:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:18:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:18:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:18:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:18:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:18:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:18:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:18:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:18:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:18:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:18:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:18:20 IQ138000 wb-watchdog[7640]: [INFO] Interval #542 started. Waiting up to 60 seconds for error...
Oct 11 15:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.3926] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.3932] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.3939] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4005] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4033] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4038] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4180] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4212] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4232] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4235] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4236] Config: added 'scan_ssid' value '1'
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4237] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4238] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:18:22 IQ138000 NetworkManager[403]: <info>  [1760195902.4239] Config: added 'psk' value '<hidden>'
Oct 11 15:18:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/383
Oct 11 15:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:25 IQ138000 NetworkManager[403]: <info>  [1760195905.5165] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:18:25 IQ138000 NetworkManager[403]: <info>  [1760195905.5182] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:18:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:18:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:18:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:18:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:18:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:18:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:18:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:18:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:18:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:18:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:18:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:18:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:18:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:18:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:18:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:18:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:18:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:18:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:18:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:18:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:18:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:18:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:18:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:18:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:18:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:18:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:18:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:18:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:18:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:18:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:18:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:18:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:18:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:18:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:18:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:18:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:18:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:18:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:18:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:18:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:48 IQ138000 NetworkManager[403]: <warn>  [1760195928.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:18:48 IQ138000 NetworkManager[403]: <info>  [1760195928.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:18:48 IQ138000 NetworkManager[403]: <warn>  [1760195928.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:18:48 IQ138000 NetworkManager[403]: <info>  [1760195928.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:18:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/383
Oct 11 15:18:48 IQ138000 NetworkManager[403]: <info>  [1760195928.0689] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:18:48 IQ138000 NetworkManager[403]: <info>  [1760195928.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:54 IQ138000 NetworkManager[403]: <info>  [1760195934.1658] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:19:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:19:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:19:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:19:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:19:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:19:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:19:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:19:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:19:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:19:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:19:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:19:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:19:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:19:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:19:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:19:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:19:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:19:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:19:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:19:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:19:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:19:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:19:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:19:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:19:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:19:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:19:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:19:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:19:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:19:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:19:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:19:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:19:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:19:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:19:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:19:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8980 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:20 IQ138000 wb-watchdog[8269]: [INFO] Interval #543 started. Waiting up to 60 seconds for error...
Oct 11 15:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:19:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:19:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:19:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:19:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:19:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:19:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:19:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:19:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:19:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:19:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:19:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:19:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:19:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:19:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:19:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:19:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:19:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:19:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:19:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:19:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:19:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:19:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:19:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:19:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:19:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:19:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:19:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:19:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:19:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:19:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:19:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:19:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:19:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:19:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:19:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:19:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:19:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:19:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:19:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:19:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:19:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0486] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0491] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0496] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0557] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0573] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0575] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0695] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0751] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0776] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0779] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0780] Config: added 'scan_ssid' value '1'
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0781] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0782] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.0783] Config: added 'psk' value '<hidden>'
Oct 11 15:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:19:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/384
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.1510] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:19:49 IQ138000 NetworkManager[403]: <info>  [1760195989.1512] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:19:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:19:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:19:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:19:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:20:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:20:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:20:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:20:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:20:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:20:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:20:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:20:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:20:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:20:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:20:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:20:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:20:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:20:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:20:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:20:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:20:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:20:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:20:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:20:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:20:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:20:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:20:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:20:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:20:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:20:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:20:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:20:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:20:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:20:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:20:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:20:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:20:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:20:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:20:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:20:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:20:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:20:14 IQ138000 NetworkManager[403]: <warn>  [1760196014.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:20:14 IQ138000 NetworkManager[403]: <info>  [1760196014.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:20:14 IQ138000 NetworkManager[403]: <warn>  [1760196014.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:20:14 IQ138000 NetworkManager[403]: <info>  [1760196014.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:20:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/384
Oct 11 15:20:14 IQ138000 NetworkManager[403]: <info>  [1760196014.0712] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:20:14 IQ138000 NetworkManager[403]: <info>  [1760196014.0714] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:20:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:19 IQ138000 NetworkManager[403]: <info>  [1760196019.7689] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:20 IQ138000 wb-watchdog[8962]: [INFO] Interval #544 started. Waiting up to 60 seconds for error...
Oct 11 15:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:20:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:20:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:20:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:20:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:20:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:20:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:20:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:20:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:20:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:20:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:20:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:20:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:20:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:20:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:20:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:20:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:20:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:20:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:20:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:20:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:20:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:20:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:20:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:20:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:20:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:20:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:20:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:20:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:20:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:20:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:20:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:20:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:20:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:20:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:20:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:20:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:20:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:20:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:20:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:20:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:20:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L1, row count 7183, limit 7042
Oct 11 15:20:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Urms L3, row count 7183, limit 7042
Oct 11 15:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:21:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:21:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:21:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:21:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:21:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:21:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:21:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:21:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:21:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:21:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:21:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:21:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:21:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:21:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:21:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:21:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:21:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:21:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:21:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:21:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:21:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:21:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:21:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:21:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:21:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:21:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:09 IQ138000 npm[3801]: [2025-10-11 15:21:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":48.2,"last_seen":1760196069067,"linkquality":105,"power_outage_count":48745,"temperature":27.4,"voltage":3025}'
Oct 11 15:21:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:21:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:21:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:21:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:21:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:21:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:21:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:21:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:21:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:21:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:21:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:21:09 IQ138000 npm[3801]: [2025-10-11 15:21:09] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":45.97,"last_seen":1760196069081,"linkquality":105,"power_outage_count":48745,"temperature":27.4,"voltage":3025}'
Oct 11 15:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:09 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760196249164,"cmd_timestamp_ms":1760196069164,"source":"regulation"}
Oct 11 15:21:09 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[1],[4]]},"expiration_stamp_ms":1760196249164,"cmd_timestamp_ms":1760196069164,"source":"regulation"}
Oct 11 15:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:21:10 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[0]
Oct 11 15:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9640] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9654] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9662] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9715] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9757] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9760] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9873] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9904] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9924] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9928] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9930] Config: added 'scan_ssid' value '1'
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9933] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9946] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:21:14 IQ138000 NetworkManager[403]: <info>  [1760196074.9947] Config: added 'psk' value '<hidden>'
Oct 11 15:21:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/385
Oct 11 15:21:15 IQ138000 NetworkManager[403]: <info>  [1760196075.0655] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:21:15 IQ138000 NetworkManager[403]: <info>  [1760196075.0657] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:21:15 IQ138000 wb-rules[6102]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {1,4}[1]
Oct 11 15:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 15:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 15:21:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 15:21:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 15:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:20 IQ138000 wb-watchdog[9589]: [INFO] Interval #545 started. Waiting up to 60 seconds for error...
Oct 11 15:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:21:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:21:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:21:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:21:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:21:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:21:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:21:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:21:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:21:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:21:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:21:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:21:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:21:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:21:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:21:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:21:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:21:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:21:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:21:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:21:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:21:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:21:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:21:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:21:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:21:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:21:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:21:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:21:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:21:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:21:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:21:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:21:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:21:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:21:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:21:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:21:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:21:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:21:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:40 IQ138000 NetworkManager[403]: <warn>  [1760196100.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:21:40 IQ138000 NetworkManager[403]: <info>  [1760196100.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:21:40 IQ138000 NetworkManager[403]: <warn>  [1760196100.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:21:40 IQ138000 NetworkManager[403]: <info>  [1760196100.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:21:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/385
Oct 11 15:21:40 IQ138000 NetworkManager[403]: <info>  [1760196100.0756] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:21:40 IQ138000 NetworkManager[403]: <info>  [1760196100.0771] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:45 IQ138000 NetworkManager[403]: <info>  [1760196105.6827] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:52 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12852 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:22:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:22:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:22:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:22:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:22:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:22:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:22:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:22:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:22:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:22:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:22:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:22:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:22:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:22:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:22:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:22:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:22:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:22:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:22:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:22:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:22:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:22:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:22:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:22:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:22:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:22:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:22:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:22:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:22:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:22:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:22:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:22:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:22:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:22:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:22:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:22:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:22:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:22:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:20 IQ138000 wb-watchdog[10286]: [INFO] Interval #546 started. Waiting up to 60 seconds for error...
Oct 11 15:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:22:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:22:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:22:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:22:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:22:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:22:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:22:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:22:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:22:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:22:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:22:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:22:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:22:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:22:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:22:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:22:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:22:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:22:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:22:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:22:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:22:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:22:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:22:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:22:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:22:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:22:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:22:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:22:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:22:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:22:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:22:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:22:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:22:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:22:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:22:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:22:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:22:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:22:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7671] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7690] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7701] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7837] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7858] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7860] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7968] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.7997] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8019] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8022] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8024] Config: added 'scan_ssid' value '1'
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8025] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8026] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8027] Config: added 'psk' value '<hidden>'
Oct 11 15:22:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/386
Oct 11 15:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8833] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:22:40 IQ138000 NetworkManager[403]: <info>  [1760196160.8835] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:22:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:22:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:22:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:22:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L3, row count 7183, limit 7042
Oct 11 15:22:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L1, row count 7183, limit 7042
Oct 11 15:22:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 S energy L2, row count 7183, limit 7042
Oct 11 15:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:06 IQ138000 NetworkManager[403]: <warn>  [1760196186.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:23:06 IQ138000 NetworkManager[403]: <info>  [1760196186.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:23:06 IQ138000 NetworkManager[403]: <warn>  [1760196186.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:23:06 IQ138000 NetworkManager[403]: <info>  [1760196186.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:23:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/386
Oct 11 15:23:06 IQ138000 NetworkManager[403]: <info>  [1760196186.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:23:06 IQ138000 NetworkManager[403]: <info>  [1760196186.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:23:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:23:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:23:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:23:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:23:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:23:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:23:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:23:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:23:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:23:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:23:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:23:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:23:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:23:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:23:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:23:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:23:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:23:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:23:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:23:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:23:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:23:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:23:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:23:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:23:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:23:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:23:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:23:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:23:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:23:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:23:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:23:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:23:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:23:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:23:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:23:12 IQ138000 NetworkManager[403]: <info>  [1760196192.5924] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:23:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:23:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:20 IQ138000 wb-watchdog[10890]: [INFO] Interval #547 started. Waiting up to 60 seconds for error...
Oct 11 15:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:23:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:23:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:23:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:23:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:34 IQ138000 npm[3801]: [2025-10-11 15:23:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":45.97,"last_seen":1760196214805,"linkquality":109,"power_outage_count":48745,"temperature":27.42,"voltage":3025}'
Oct 11 15:23:34 IQ138000 npm[3801]: [2025-10-11 15:23:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.8,"last_seen":1760196214814,"linkquality":105,"power_outage_count":48745,"temperature":27.42,"voltage":3025}'
Oct 11 15:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:23:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:23:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:23:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:23:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:23:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:23:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:23:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:23:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:23:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:23:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:23:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:23:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:23:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:23:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:23:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:23:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:23:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:23:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:23:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:23:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:23:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:23:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:23:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:23:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:23:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:23:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:23:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:23:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:23:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:23:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:23:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:23:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:23:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:23:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:23:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:23:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:23:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:24:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5012] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5017] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5024] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5119] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5146] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5148] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5254] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5278] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5301] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5305] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5322] Config: added 'scan_ssid' value '1'
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5325] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5326] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.5327] Config: added 'psk' value '<hidden>'
Oct 11 15:24:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/387
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.6077] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:24:07 IQ138000 NetworkManager[403]: <info>  [1760196247.6079] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:24:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:24:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:24:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:24:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:24:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:24:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:24:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:24:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:24:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:24:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:24:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:24:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:24:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:24:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:24:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:24:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:24:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:24:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:24:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:24:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:24:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:24:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:24:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:24:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:24:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:24:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:24:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:24:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:24:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:24:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:24:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:24:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:24:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:24:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:24:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:24:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:24:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:24:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:20 IQ138000 wb-watchdog[11605]: [INFO] Interval #548 started. Waiting up to 60 seconds for error...
Oct 11 15:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:24:33 IQ138000 NetworkManager[403]: <warn>  [1760196273.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:24:33 IQ138000 NetworkManager[403]: <info>  [1760196273.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:24:33 IQ138000 NetworkManager[403]: <warn>  [1760196273.0259] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:24:33 IQ138000 NetworkManager[403]: <info>  [1760196273.0273] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:24:33 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:24:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/387
Oct 11 15:24:33 IQ138000 NetworkManager[403]: <info>  [1760196273.0709] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:24:33 IQ138000 NetworkManager[403]: <info>  [1760196273.0711] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:24:33 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:24:39 IQ138000 NetworkManager[403]: <info>  [1760196279.2714] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:24:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:24:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:24:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:24:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:24:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:24:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:24:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:24:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:24:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:24:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:24:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:24:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:24:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:24:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:24:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:24:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:24:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:24:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:24:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:24:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:24:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:24:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:24:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:24:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:24:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:24:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:24:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:24:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:24:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:24:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:24:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:24:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:24:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:24:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:24:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:24:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:24:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:24:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L1, row count 7183, limit 7042
Oct 11 15:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:25:01 IQ138000 CRON[11971]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:25:01 IQ138000 CRON[11981]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 15:25:01 IQ138000 CRON[11971]: pam_unix(cron:session): session closed for user root
Oct 11 15:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:25:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:25:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:25:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:25:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:25:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:25:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:25:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:25:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:25:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:25:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:25:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:25:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:25:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:25:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:25:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:25:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:25:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:25:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:25:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:25:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:25:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:25:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:25:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:25:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:25:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:25:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:25:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:25:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:25:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:25:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:25:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:25:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:25:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:25:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:25:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:25:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:25:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:25:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 15:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:25:20 IQ138000 wb-watchdog[12215]: [INFO] Interval #549 started. Waiting up to 60 seconds for error...
Oct 11 15:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:25:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:25:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5075] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5080] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5085] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5172] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5195] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5203] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5325] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5362] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5385] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5389] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5390] Config: added 'scan_ssid' value '1'
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5393] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5395] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:25:34 IQ138000 NetworkManager[403]: <info>  [1760196334.5396] Config: added 'psk' value '<hidden>'
Oct 11 15:25:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/388
Oct 11 15:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:37 IQ138000 NetworkManager[403]: <info>  [1760196337.6190] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:25:37 IQ138000 NetworkManager[403]: <info>  [1760196337.6192] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:25:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:25:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:25:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:25:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:25:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:25:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:25:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:25:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:25:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:25:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:25:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:25:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:25:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:25:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:25:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:25:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:25:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:25:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:25:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:25:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:25:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:25:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:25:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:25:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:25:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:25:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:25:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:25:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:25:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:25:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:25:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:25:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:25:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:25:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:25:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:25:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:25:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:25:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:25:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:25:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:00 IQ138000 NetworkManager[403]: <warn>  [1760196360.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:26:00 IQ138000 NetworkManager[403]: <info>  [1760196360.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:26:00 IQ138000 NetworkManager[403]: <warn>  [1760196360.0262] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:26:00 IQ138000 NetworkManager[403]: <info>  [1760196360.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:26:00 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:26:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/388
Oct 11 15:26:00 IQ138000 NetworkManager[403]: <info>  [1760196360.0681] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:26:00 IQ138000 NetworkManager[403]: <info>  [1760196360.0683] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:00 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:06 IQ138000 NetworkManager[403]: <info>  [1760196366.2154] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:26:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:26:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:26:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:26:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:26:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:26:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:26:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:26:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:26:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:26:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:26:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:26:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:26:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:26:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:26:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:26:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:26:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:26:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:26:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:26:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:26:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:26:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:26:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:26:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:26:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:26:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:26:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:26:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:26:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:26:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:26:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:26:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:26:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:26:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:26:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:26:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:26:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:20 IQ138000 wb-watchdog[12930]: [INFO] Interval #550 started. Waiting up to 60 seconds for error...
Oct 11 15:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:26:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:26:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:26:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:26:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:26:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:26:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:26:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:26:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:26:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:26:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:26:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:26:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:26:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:26:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:26:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:26:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:26:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:26:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:26:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:26:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:26:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:26:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:26:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:26:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:26:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:26:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:26:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:26:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:26:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:26:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:26:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:26:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:26:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:26:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:26:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:26:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:26:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:26:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:26:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L3, row count 7183, limit 7042
Oct 11 15:26:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L2, row count 7183, limit 7042
Oct 11 15:26:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 AP energy L1, row count 7183, limit 7042
Oct 11 15:26:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L3, row count 7183, limit 7042
Oct 11 15:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4108] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4115] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4122] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4335] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4407] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4409] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4611] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4665] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:27:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/389
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4712] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4717] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4718] Config: added 'scan_ssid' value '1'
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4719] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4720] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:27:01 IQ138000 NetworkManager[403]: <info>  [1760196421.4721] Config: added 'psk' value '<hidden>'
Oct 11 15:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:04 IQ138000 NetworkManager[403]: <info>  [1760196424.5492] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:27:04 IQ138000 NetworkManager[403]: <info>  [1760196424.5494] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:27:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:27:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:27:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:27:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:27:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:27:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:27:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:27:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:27:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:27:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:27:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:27:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:27:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:27:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:27:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:27:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:27:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:27:11 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:27:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:27:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:27:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:27:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:27:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:27:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:27:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:27:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:27:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:27:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:27:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:27:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:27:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:27:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:27:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:27:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:27:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:27:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:27:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:20 IQ138000 wb-watchdog[13544]: [INFO] Interval #551 started. Waiting up to 60 seconds for error...
Oct 11 15:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:27:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:27:27 IQ138000 NetworkManager[403]: <warn>  [1760196447.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:27:27 IQ138000 NetworkManager[403]: <info>  [1760196447.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:27:27 IQ138000 NetworkManager[403]: <warn>  [1760196447.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:27:27 IQ138000 NetworkManager[403]: <info>  [1760196447.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:27:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/389
Oct 11 15:27:27 IQ138000 NetworkManager[403]: <info>  [1760196447.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:27:27 IQ138000 NetworkManager[403]: <info>  [1760196447.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:27:33 IQ138000 NetworkManager[403]: <info>  [1760196453.1717] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:27:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:27:38 IQ138000 npm[3801]: [2025-10-11 15:27:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":57.1,"last_seen":1760196458755,"linkquality":80,"power_outage_count":25795,"pressure":992.2,"temperature":22.77,"voltage":2995}'
Oct 11 15:27:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:27:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:27:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:27:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:27:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:27:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:27:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:27:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:27:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:27:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:27:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:27:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:27:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:27:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:27:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:27:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:27:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:27:41 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:27:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:27:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:27:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:27:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:27:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:27:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:27:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:27:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:27:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:27:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:27:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:27:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:27:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:27:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:27:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:27:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:27:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:27:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:27:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:27:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:27:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:27:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:27:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:28:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:28:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:28:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:28:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:28:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:28:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:28:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:28:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:28:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:28:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:28:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:28:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:28:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:28:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:28:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:28:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:28:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:28:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:28:11 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:28:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:28:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:28:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:28:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:28:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:28:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:28:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:28:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:28:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:28:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:28:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:28:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:28:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:28:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:28:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:28:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:28:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:28:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:28:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 15:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:28:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:20 IQ138000 wb-watchdog[14229]: [INFO] Interval #552 started. Waiting up to 60 seconds for error...
Oct 11 15:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:24 IQ138000 npm[3801]: [2025-10-11 15:28:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":48.13,"last_seen":1760196504788,"linkquality":76,"power_outage_count":35250,"temperature":24.1,"voltage":3075}'
Oct 11 15:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2311] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2316] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2330] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2387] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2411] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2413] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2501] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2523] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2540] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2546] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2547] Config: added 'scan_ssid' value '1'
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2549] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2551] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.2552] Config: added 'psk' value '<hidden>'
Oct 11 15:28:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/390
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.3257] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:28:28 IQ138000 NetworkManager[403]: <info>  [1760196508.3262] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:28:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:28:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:28:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:28:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:28:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:28:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:28:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:28:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:28:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:28:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:28:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:28:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:28:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:28:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:28:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:28:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:28:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:28:42 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:28:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:28:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:28:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:28:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:28:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:28:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:28:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:28:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:28:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:28:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:28:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:28:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:28:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:28:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:28:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:28:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:28:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:28:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:28:53 IQ138000 NetworkManager[403]: <warn>  [1760196533.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:28:53 IQ138000 NetworkManager[403]: <info>  [1760196533.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:28:53 IQ138000 NetworkManager[403]: <warn>  [1760196533.0264] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:28:53 IQ138000 NetworkManager[403]: <info>  [1760196533.0366] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:28:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/390
Oct 11 15:28:53 IQ138000 NetworkManager[403]: <info>  [1760196533.0843] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:28:53 IQ138000 NetworkManager[403]: <info>  [1760196533.0849] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:28:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:28:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:28:58 IQ138000 NetworkManager[403]: <info>  [1760196538.9865] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:29:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:29:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:29:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:29:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:29:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:29:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:29:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:29:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:29:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:29:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:29:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:29:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:29:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:29:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:29:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:29:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:29:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:29:12 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:29:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:29:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:29:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:29:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:29:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:29:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:29:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:29:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:29:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:29:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:29:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:29:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:29:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:29:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:29:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:29:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:29:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:29:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:29:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:29:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:20 IQ138000 wb-watchdog[14856]: [INFO] Interval #553 started. Waiting up to 60 seconds for error...
Oct 11 15:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:29:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:29:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:29:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:29:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:29:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:29:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:29:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:29:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:29:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:29:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:29:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:29:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:29:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:29:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:29:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:29:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:29:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:29:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:29:42 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:29:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:29:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:29:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:29:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:29:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:29:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:29:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:29:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:29:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:29:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:29:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:29:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:29:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:29:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:29:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:29:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:29:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:29:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:29:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:53 IQ138000 NetworkManager[403]: <info>  [1760196593.9816] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:29:53 IQ138000 NetworkManager[403]: <info>  [1760196593.9829] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:29:53 IQ138000 NetworkManager[403]: <info>  [1760196593.9851] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:29:53 IQ138000 NetworkManager[403]: <info>  [1760196593.9964] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:29:53 IQ138000 NetworkManager[403]: <info>  [1760196593.9991] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:29:53 IQ138000 NetworkManager[403]: <info>  [1760196593.9992] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0154] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0175] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0190] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0193] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0194] Config: added 'scan_ssid' value '1'
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0195] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0196] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0197] Config: added 'psk' value '<hidden>'
Oct 11 15:29:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/391
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0917] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:29:54 IQ138000 NetworkManager[403]: <info>  [1760196594.0919] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:29:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:29:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:30:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:30:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:30:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:30:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:30:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:30:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:30:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:30:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:30:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:30:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:30:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:30:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:30:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:30:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:30:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:30:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:30:12 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:30:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:30:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:30:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:30:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:30:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:30:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:30:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:30:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:30:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:30:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:30:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:30:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:30:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:30:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:30:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:30:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:30:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:30:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:30:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:30:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:30:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:19 IQ138000 NetworkManager[403]: <warn>  [1760196619.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:30:19 IQ138000 NetworkManager[403]: <info>  [1760196619.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:30:19 IQ138000 NetworkManager[403]: <warn>  [1760196619.0258] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:30:19 IQ138000 NetworkManager[403]: <info>  [1760196619.0276] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:30:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/391
Oct 11 15:30:19 IQ138000 NetworkManager[403]: <info>  [1760196619.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:30:19 IQ138000 NetworkManager[403]: <info>  [1760196619.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:20 IQ138000 wb-watchdog[15551]: [INFO] Interval #554 started. Waiting up to 60 seconds for error...
Oct 11 15:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:30:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:30:24 IQ138000 NetworkManager[403]: <info>  [1760196624.7634] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:30:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:30:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:30:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:30:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:30:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:30:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:30:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:30:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:30:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:30:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:30:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:30:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:30:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:30:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:30:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:30:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:30:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:30:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:30:43 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:30:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:30:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:30:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:30:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:30:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:30:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:30:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:30:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:30:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:30:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:30:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:30:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:30:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:30:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:30:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:30:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:30:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:30:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:30:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:30:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:30:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:30:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:30:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:31:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:31:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:31:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:31:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:31:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:31:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:31:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:31:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:31:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:31:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:31:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:31:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:31:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:31:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:31:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:31:13 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:31:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:31:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:31:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:31:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:31:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:31:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:31:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:31:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:31:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:31:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:31:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:31:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:31:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:31:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:31:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:31:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:31:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:31:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:31:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:31:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:31:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8317] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8324] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8330] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8436] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8453] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8455] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8604] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8637] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8670] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8687] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8689] Config: added 'scan_ssid' value '1'
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8690] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8693] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.8694] Config: added 'psk' value '<hidden>'
Oct 11 15:31:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/392
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.9497] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:31:19 IQ138000 NetworkManager[403]: <info>  [1760196679.9500] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:31:20 IQ138000 wb-watchdog[16164]: [INFO] Interval #555 started. Waiting up to 60 seconds for error...
Oct 11 15:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:31 IQ138000 npm[3801]: [2025-10-11 15:31:31] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":48.13,"last_seen":1760196691260,"linkquality":61,"power_outage_count":35250,"temperature":24.07,"voltage":3075}'
Oct 11 15:31:31 IQ138000 npm[3801]: [2025-10-11 15:31:31] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":49.38,"last_seen":1760196691276,"linkquality":61,"power_outage_count":35250,"temperature":24.07,"voltage":3075}'
Oct 11 15:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:31:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:31:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L1, row count 7183, limit 7042
Oct 11 15:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:31:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:31:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:31:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:31:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:31:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:31:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:31:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:31:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:31:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:31:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:31:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:31:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:31:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:31:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:31:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:31:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:31:43 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:31:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:31:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:31:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:31:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:31:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:31:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:31:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:31:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:31:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:31:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:31:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:31:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:31:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:31:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:31:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:31:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:31:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:31:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:31:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:31:45 IQ138000 NetworkManager[403]: <warn>  [1760196705.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:31:45 IQ138000 NetworkManager[403]: <info>  [1760196705.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:31:45 IQ138000 NetworkManager[403]: <warn>  [1760196705.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:31:45 IQ138000 NetworkManager[403]: <info>  [1760196705.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:31:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/392
Oct 11 15:31:45 IQ138000 NetworkManager[403]: <info>  [1760196705.0683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:31:45 IQ138000 NetworkManager[403]: <info>  [1760196705.0685] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:31:51 IQ138000 NetworkManager[403]: <info>  [1760196711.6067] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:31:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:31:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:31:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:31:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:32:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:32:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:32:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:32:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:32:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:32:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:32:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:32:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:32:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:32:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:32:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:32:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:32:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:32:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:32:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:32:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:32:13 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:32:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:32:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:32:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:32:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:32:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:32:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:32:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:32:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:32:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:32:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:32:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:32:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:32:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:32:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:32:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:32:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:32:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:32:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:32:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:32:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:32:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:32:20 IQ138000 wb-watchdog[16873]: [INFO] Interval #556 started. Waiting up to 60 seconds for error...
Oct 11 15:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:32:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:32:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:32:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:32:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:32:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:32:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:32:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:32:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:32:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:32:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:32:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:32:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:32:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:32:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:32:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:32:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:32:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:32:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:32:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:32:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:32:44 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:32:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:32:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:32:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:32:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:32:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:32:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:32:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:32:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:32:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:32:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:32:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:32:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:32:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:32:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:32:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:32:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:32:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:32:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:32:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.4958] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.4962] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.4967] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5016] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5031] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5033] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5121] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5170] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5191] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5194] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5195] Config: added 'scan_ssid' value '1'
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5196] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5199] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5200] Config: added 'psk' value '<hidden>'
Oct 11 15:32:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/393
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5900] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:32:46 IQ138000 NetworkManager[403]: <info>  [1760196766.5902] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:32:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:32:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 4339 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:32:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_38/External Sensor 1, row count 7183, limit 7042
Oct 11 15:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:33:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:12 IQ138000 NetworkManager[403]: <warn>  [1760196792.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:33:12 IQ138000 NetworkManager[403]: <info>  [1760196792.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:33:12 IQ138000 NetworkManager[403]: <warn>  [1760196792.0259] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:33:12 IQ138000 NetworkManager[403]: <info>  [1760196792.0336] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:33:12 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:33:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/393
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:12 IQ138000 NetworkManager[403]: <info>  [1760196792.1816] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:33:12 IQ138000 NetworkManager[403]: <info>  [1760196792.1833] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:33:12 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:33:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:33:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:33:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:33:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:33:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:33:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:33:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:33:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:33:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:33:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:33:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:33:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:33:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:33:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:33:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:33:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:33:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:33:14 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:33:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:33:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:33:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:33:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:33:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:33:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:33:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:33:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:33:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:33:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:33:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:33:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:33:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:33:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:33:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:33:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:33:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:33:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:33:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:33:18 IQ138000 NetworkManager[403]: <info>  [1760196798.2664] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:33:20 IQ138000 wb-watchdog[17483]: [INFO] Interval #557 started. Waiting up to 60 seconds for error...
Oct 11 15:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:33:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:33:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L2, row count 7183, limit 7042
Oct 11 15:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:33:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:33:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:33:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:33:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:33:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:33:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:33:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:33:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:33:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:33:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:33:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:33:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:33:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:33:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:33:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:33:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:33:44 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:33:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:33:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:33:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:33:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:33:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:33:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:33:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:33:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:33:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:33:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:33:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:33:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:33:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:33:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:33:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:33:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:33:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:33:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:33:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:33:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:34:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:34:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13320 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2479] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2484] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2489] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2547] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2567] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2569] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2655] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2673] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2690] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2694] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2695] Config: added 'scan_ssid' value '1'
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2696] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2697] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:34:13 IQ138000 NetworkManager[403]: <info>  [1760196853.2699] Config: added 'psk' value '<hidden>'
Oct 11 15:34:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/394
Oct 11 15:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:34:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:34:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:34:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:34:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:34:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:34:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:34:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:34:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:34:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:34:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:34:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:34:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:34:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:34:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:34:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:34:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:34:14 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:34:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:34:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:34:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:34:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:34:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:34:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:34:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:34:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:34:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:34:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:34:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:34:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:34:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:34:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:34:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:34:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:34:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:34:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:34:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:34:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:34:17 IQ138000 NetworkManager[403]: <info>  [1760196857.3434] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:34:17 IQ138000 NetworkManager[403]: <info>  [1760196857.3436] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:20 IQ138000 wb-watchdog[18178]: [INFO] Interval #558 started. Waiting up to 60 seconds for error...
Oct 11 15:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:39 IQ138000 NetworkManager[403]: <warn>  [1760196879.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:34:39 IQ138000 NetworkManager[403]: <info>  [1760196879.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:34:39 IQ138000 NetworkManager[403]: <warn>  [1760196879.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:34:39 IQ138000 NetworkManager[403]: <info>  [1760196879.0276] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:34:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/394
Oct 11 15:34:39 IQ138000 NetworkManager[403]: <info>  [1760196879.0722] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:34:39 IQ138000 NetworkManager[403]: <info>  [1760196879.0724] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:34:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:34:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:34:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:34:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:34:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:34:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:34:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:34:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:34:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:34:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:34:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:34:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:34:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:34:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:34:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:34:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:34:44 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:34:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:34:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:34:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:34:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:34:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:34:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:34:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:34:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:34:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:34:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:34:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:34:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:34:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:34:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:34:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:34:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:34:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:34:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:34:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:34:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:34:45 IQ138000 NetworkManager[403]: <info>  [1760196885.1039] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:34:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:34:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:34:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:34:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L2, row count 7183, limit 7042
Oct 11 15:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:01 IQ138000 CRON[18554]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:35:01 IQ138000 CRON[18558]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 15:35:01 IQ138000 CRON[18554]: pam_unix(cron:session): session closed for user root
Oct 11 15:35:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:35:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:35:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:35:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:35:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:35:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:35:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:35:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:35:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:35:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:35:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:35:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:35:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:35:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:35:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:35:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:35:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:35:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:35:15 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:35:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:35:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:35:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:35:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:35:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:35:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:35:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:35:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:35:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:35:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:35:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:35:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:35:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:35:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:35:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:35:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:35:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:35:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:35:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:35:20 IQ138000 wb-watchdog[18799]: [INFO] Interval #559 started. Waiting up to 60 seconds for error...
Oct 11 15:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:35:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:35:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L3, row count 7183, limit 7042
Oct 11 15:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2041] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2046] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2051] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2097] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2115] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2117] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2228] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2258] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2286] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2299] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2300] Config: added 'scan_ssid' value '1'
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2301] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2302] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2303] Config: added 'psk' value '<hidden>'
Oct 11 15:35:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/395
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2962] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:35:40 IQ138000 NetworkManager[403]: <info>  [1760196940.2966] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:35:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:35:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:35:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:35:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:35:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:35:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:35:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:35:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:35:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:35:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:35:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:35:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:35:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:35:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:35:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:35:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:35:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:35:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:35:45 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:35:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:35:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:35:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:35:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:35:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:35:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:35:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:35:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:35:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:35:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:35:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:35:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:35:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:35:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:35:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:35:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:35:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:35:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:35:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:36:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:05 IQ138000 NetworkManager[403]: <warn>  [1760196965.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:36:05 IQ138000 NetworkManager[403]: <info>  [1760196965.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:36:05 IQ138000 NetworkManager[403]: <warn>  [1760196965.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:36:05 IQ138000 NetworkManager[403]: <info>  [1760196965.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:36:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/395
Oct 11 15:36:05 IQ138000 NetworkManager[403]: <info>  [1760196965.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:36:05 IQ138000 NetworkManager[403]: <info>  [1760196965.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5394 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:36:10 IQ138000 NetworkManager[403]: <info>  [1760196970.9464] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:36:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:36:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:36:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:36:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:36:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:36:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:36:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:36:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:36:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:36:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:36:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:36:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:36:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:36:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:36:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:36:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:36:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:36:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:36:15 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:36:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:36:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:36:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:36:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:36:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:36:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:36:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:36:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:36:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:36:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:36:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:36:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:36:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:36:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:36:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:36:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:36:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:36:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:36:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:20 IQ138000 wb-watchdog[19509]: [INFO] Interval #560 started. Waiting up to 60 seconds for error...
Oct 11 15:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 5144 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:36:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:36:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:36:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:36:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:36:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:36:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:36:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:36:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:36:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:36:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:36:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:36:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:36:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:36:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:36:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:36:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:36:45 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:36:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:36:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:36:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:36:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:36:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:36:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:36:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:36:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:36:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:36:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:36:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:36:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:36:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:36:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:36:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:36:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:36:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:36:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:36:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:36:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9224 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:36:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:36:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1459] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1464] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1469] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1525] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1544] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1545] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1632] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1653] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1671] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1674] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1675] Config: added 'scan_ssid' value '1'
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1676] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1677] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.1678] Config: added 'psk' value '<hidden>'
Oct 11 15:37:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/396
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.2494] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:37:06 IQ138000 NetworkManager[403]: <info>  [1760197026.2497] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:37:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:37:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:37:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:37:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:37:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:37:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:37:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:37:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:37:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:37:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:37:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:37:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:37:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:37:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:37:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:37:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:37:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:37:16 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:37:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:37:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:37:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:37:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:37:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:37:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:37:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:37:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:37:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:37:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:37:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:37:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:37:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:37:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:37:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:37:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:37:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:37:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:37:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:37:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:37:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:37:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:20 IQ138000 wb-watchdog[20123]: [INFO] Interval #561 started. Waiting up to 60 seconds for error...
Oct 11 15:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:31 IQ138000 NetworkManager[403]: <warn>  [1760197051.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:37:31 IQ138000 NetworkManager[403]: <info>  [1760197051.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:37:31 IQ138000 NetworkManager[403]: <warn>  [1760197051.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:37:31 IQ138000 NetworkManager[403]: <info>  [1760197051.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:37:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/396
Oct 11 15:37:31 IQ138000 NetworkManager[403]: <info>  [1760197051.0688] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:37:31 IQ138000 NetworkManager[403]: <info>  [1760197051.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:36 IQ138000 NetworkManager[403]: <info>  [1760197056.9366] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:37:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:37:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:37:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:37:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:37:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:37:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:37:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:37:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:37:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:37:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:37:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:37:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:37:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:37:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:37:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:37:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:37:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:37:46 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:37:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:37:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:37:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:37:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:37:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:37:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:37:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:37:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:37:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:37:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:37:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:37:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:37:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:37:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:37:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:37:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:37:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:37:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:37:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:38:01 IQ138000 CRON[20583]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:38:01 IQ138000 CRON[20588]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 15:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:38:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:38:07 IQ138000 sSMTP[20607]: Unable to locate mail
Oct 11 15:38:07 IQ138000 cron[20607]: sendmail: Cannot open mail:25
Oct 11 15:38:07 IQ138000 sSMTP[20607]: Cannot open mail:25
Oct 11 15:38:07 IQ138000 CRON[20583]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 15:38:07 IQ138000 CRON[20583]: pam_unix(cron:session): session closed for user root
Oct 11 15:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:38:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:38:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:38:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:38:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:38:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:38:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:38:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:38:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:38:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:38:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:38:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:38:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:38:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:38:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:38:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:38:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:38:16 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:38:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:38:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:38:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:38:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:38:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:38:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:38:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:38:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:38:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:38:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:38:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:38:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:38:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:38:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:38:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:38:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:38:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:38:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:38:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:20 IQ138000 wb-watchdog[20833]: [INFO] Interval #562 started. Waiting up to 60 seconds for error...
Oct 11 15:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:38:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.1837] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.1842] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.1847] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.1910] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.1937] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.1939] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2025] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2053] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2076] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2082] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2084] Config: added 'scan_ssid' value '1'
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2085] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2087] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2105] Config: added 'psk' value '<hidden>'
Oct 11 15:38:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/397
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2823] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:38:32 IQ138000 NetworkManager[403]: <info>  [1760197112.2825] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:38:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:38:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8980 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:38:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:38:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:38:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:38:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:38:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:38:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:38:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:38:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:38:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:38:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:38:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:38:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:38:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:38:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:38:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:38:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:38:46 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:38:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:38:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:38:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:38:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:38:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:38:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:38:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:38:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:38:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:38:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:38:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:38:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:38:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:38:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:38:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:38:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:38:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:38:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:38:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:57 IQ138000 NetworkManager[403]: <warn>  [1760197137.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:38:57 IQ138000 NetworkManager[403]: <info>  [1760197137.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:38:57 IQ138000 NetworkManager[403]: <warn>  [1760197137.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:38:57 IQ138000 NetworkManager[403]: <info>  [1760197137.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:38:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/397
Oct 11 15:38:57 IQ138000 NetworkManager[403]: <info>  [1760197137.0733] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:38:57 IQ138000 NetworkManager[403]: <info>  [1760197137.0735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L3, row count 7183, limit 7042
Oct 11 15:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:39:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:39:02 IQ138000 NetworkManager[403]: <info>  [1760197142.9147] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:39:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:39:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:39:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:39:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:39:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:39:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:39:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:39:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:39:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:39:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:39:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:39:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:39:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:39:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:39:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:39:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:39:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:39:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:39:16 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:39:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:39:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:39:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:39:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:39:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:39:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:39:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:39:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:39:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:39:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:39:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:39:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:39:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:39:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:39:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:39:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:39:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:39:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:39:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:39:20 IQ138000 wb-watchdog[21454]: [INFO] Interval #563 started. Waiting up to 60 seconds for error...
Oct 11 15:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:39:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:39:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:39:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L2, row count 7183, limit 7042
Oct 11 15:39:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L3, row count 7183, limit 7042
Oct 11 15:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:39:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:39:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:39:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:39:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:39:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:39:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:39:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:39:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:39:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:39:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:39:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:39:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:39:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:39:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:39:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:39:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:39:47 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:39:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:39:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:39:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:39:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:39:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:39:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:39:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:39:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:39:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:39:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:39:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:39:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:39:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:39:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:39:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:39:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:39:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:39:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:39:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8290] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8295] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8302] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8369] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8388] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8390] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8478] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8499] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8516] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8519] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8520] Config: added 'scan_ssid' value '1'
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8521] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8523] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.8525] Config: added 'psk' value '<hidden>'
Oct 11 15:39:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/398
Oct 11 15:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.9341] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:39:57 IQ138000 NetworkManager[403]: <info>  [1760197197.9345] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:40:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:40:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 15:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:40:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:40:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:40:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:40:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:40:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:40:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:40:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:40:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:40:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:40:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:40:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:40:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:40:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:40:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:40:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:40:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:40:17 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:40:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:40:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:40:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:40:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:40:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:40:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:40:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:40:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:40:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:40:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:40:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:40:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:40:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:40:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:40:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:40:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:40:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:40:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:40:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 15:40:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 15:40:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 15:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:40:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:40:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:20 IQ138000 wb-watchdog[22134]: [INFO] Interval #564 started. Waiting up to 60 seconds for error...
Oct 11 15:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:23 IQ138000 NetworkManager[403]: <warn>  [1760197223.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:40:23 IQ138000 NetworkManager[403]: <info>  [1760197223.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:40:23 IQ138000 NetworkManager[403]: <warn>  [1760197223.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:40:23 IQ138000 NetworkManager[403]: <info>  [1760197223.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:40:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/398
Oct 11 15:40:23 IQ138000 NetworkManager[403]: <info>  [1760197223.0627] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:40:23 IQ138000 NetworkManager[403]: <info>  [1760197223.0629] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:40:29 IQ138000 NetworkManager[403]: <info>  [1760197229.5584] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:40:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:40:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:40:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:40:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:40:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:40:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:40:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:40:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:40:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:40:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:40:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:40:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:40:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:40:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:40:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:40:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:40:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:40:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:40:47 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:40:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:40:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:40:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:40:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:40:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:40:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:40:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:40:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:40:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:40:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:40:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:40:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:40:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:40:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:40:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:40:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:40:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:40:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:40:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:40:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:40:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Irms L2, row count 7183, limit 7042
Oct 11 15:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:41:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:41:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:41:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:41:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:41:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:41:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:41:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:41:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:41:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:41:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:41:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:41:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:41:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:41:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:41:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:41:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:41:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:41:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:41:17 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:41:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:41:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:41:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:41:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:41:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:41:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:41:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:41:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:41:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:41:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:41:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:41:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:41:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:41:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:41:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:41:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:41:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:41:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:41:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:20 IQ138000 wb-watchdog[22765]: [INFO] Interval #565 started. Waiting up to 60 seconds for error...
Oct 11 15:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.6839] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.6857] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.6867] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.6966] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.6986] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.6988] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7100] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7123] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7144] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7147] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7148] Config: added 'scan_ssid' value '1'
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7149] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7164] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7165] Config: added 'psk' value '<hidden>'
Oct 11 15:41:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/399
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7946] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:41:24 IQ138000 NetworkManager[403]: <info>  [1760197284.7948] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16920 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:41:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:41:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:41:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:41:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:41:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:41:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:41:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:41:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:41:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:41:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:41:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:41:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:41:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:41:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:41:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:41:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:41:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:41:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:41:47 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:41:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:41:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:41:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:41:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:41:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:41:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:41:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:41:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:41:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:41:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:41:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:41:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:41:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:41:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:41:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:41:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:41:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:41:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:41:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:41:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:41:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:41:50 IQ138000 NetworkManager[403]: <warn>  [1760197310.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:41:50 IQ138000 NetworkManager[403]: <info>  [1760197310.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:41:50 IQ138000 NetworkManager[403]: <warn>  [1760197310.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:41:50 IQ138000 NetworkManager[403]: <info>  [1760197310.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:41:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/399
Oct 11 15:41:50 IQ138000 NetworkManager[403]: <info>  [1760197310.0642] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:41:50 IQ138000 NetworkManager[403]: <info>  [1760197310.0644] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:41:56 IQ138000 NetworkManager[403]: <info>  [1760197316.4139] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:41:57 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:42:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:42:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:42:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:42:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:42:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:42:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:42:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:42:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:42:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:42:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:42:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:42:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:42:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:42:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:42:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:42:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:42:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:42:18 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:42:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:42:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:42:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:42:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:42:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:42:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:42:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:42:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:42:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:42:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:42:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:42:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:42:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:42:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:42:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:42:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:42:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:42:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:42:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:42:20 IQ138000 wb-watchdog[23473]: [INFO] Interval #566 started. Waiting up to 60 seconds for error...
Oct 11 15:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8980 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:42:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:42:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:42:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:42:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:42:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:42:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:42:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:42:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:42:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:42:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:42:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:42:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:42:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:42:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:42:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:42:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:42:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:42:48 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:42:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:42:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:42:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:42:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:42:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:42:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:42:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:42:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:42:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:42:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:42:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:42:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:42:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:42:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:42:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:42:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:42:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:42:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:42:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.5922] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.5927] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.5932] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.5987] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6028] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6030] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6138] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6159] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6186] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6189] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6190] Config: added 'scan_ssid' value '1'
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6191] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6193] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6194] Config: added 'psk' value '<hidden>'
Oct 11 15:42:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/400
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6983] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:42:51 IQ138000 NetworkManager[403]: <info>  [1760197371.6985] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:42:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:42:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:43:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:43:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:17 IQ138000 NetworkManager[403]: <warn>  [1760197397.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:43:17 IQ138000 NetworkManager[403]: <info>  [1760197397.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:43:17 IQ138000 NetworkManager[403]: <warn>  [1760197397.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:43:17 IQ138000 NetworkManager[403]: <info>  [1760197397.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:43:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/400
Oct 11 15:43:17 IQ138000 NetworkManager[403]: <info>  [1760197397.0740] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:43:17 IQ138000 NetworkManager[403]: <info>  [1760197397.0742] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:43:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:43:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:43:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:43:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:43:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:43:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:43:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:43:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:43:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:43:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:43:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:43:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:43:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:43:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:43:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:43:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:43:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:43:18 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:43:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:43:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:43:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:43:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:43:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:43:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:43:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:43:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:43:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:43:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:43:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:43:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:43:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:43:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:43:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:43:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:43:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:43:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:43:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:20 IQ138000 wb-watchdog[24079]: [INFO] Interval #567 started. Waiting up to 60 seconds for error...
Oct 11 15:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:23 IQ138000 NetworkManager[403]: <info>  [1760197403.3080] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:43:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:43:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:43:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:43:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:43:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:43:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:43:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:43:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:43:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:43:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:43:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:43:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:43:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:43:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:43:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:43:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:43:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:43:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:43:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:43:48 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:43:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:43:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:43:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:43:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:43:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:43:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:43:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:43:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:43:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:43:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:43:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:43:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:43:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:43:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:43:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:43:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:43:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:43:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:44:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:44:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2366] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2371] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2378] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2429] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2471] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2473] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2586] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2612] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2629] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2633] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2634] Config: added 'scan_ssid' value '1'
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2634] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2636] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.2637] Config: added 'psk' value '<hidden>'
Oct 11 15:44:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/401
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.3521] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:44:18 IQ138000 NetworkManager[403]: <info>  [1760197458.3523] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:44:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:44:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:44:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:44:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:44:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:44:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:44:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:44:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:44:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:44:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:44:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:44:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:44:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:44:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:44:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:44:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:44:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:44:18 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:44:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:44:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:44:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:44:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:44:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:44:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:44:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:44:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:44:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:44:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:44:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:44:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:44:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:44:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:44:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:44:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:44:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:44:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:44:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:44:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:20 IQ138000 wb-watchdog[24791]: [INFO] Interval #568 started. Waiting up to 60 seconds for error...
Oct 11 15:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:44:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:44:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:44:44 IQ138000 NetworkManager[403]: <warn>  [1760197484.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:44:44 IQ138000 NetworkManager[403]: <info>  [1760197484.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:44:44 IQ138000 NetworkManager[403]: <warn>  [1760197484.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:44:44 IQ138000 NetworkManager[403]: <info>  [1760197484.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:44:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:44:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/401
Oct 11 15:44:44 IQ138000 NetworkManager[403]: <info>  [1760197484.0768] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:44:44 IQ138000 NetworkManager[403]: <info>  [1760197484.0777] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 15:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:44:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:44:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:44:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:44:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:44:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:44:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:44:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:44:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:44:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:44:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:44:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:44:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:44:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:44:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:44:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:44:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:44:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:44:49 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:44:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:44:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:44:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:44:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:44:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:44:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:44:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:44:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:44:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:44:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:44:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:44:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:44:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:44:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:44:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:44:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:44:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:44:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:44:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:44:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:44:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 15:44:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 15:44:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 15:44:50 IQ138000 NetworkManager[403]: <info>  [1760197490.0284] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:44:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:44:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:02 IQ138000 CRON[25163]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:45:02 IQ138000 CRON[25167]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 15:45:02 IQ138000 CRON[25163]: pam_unix(cron:session): session closed for user root
Oct 11 15:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:45:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 15:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 15:45:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 15:45:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 15:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:45:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:45:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:45:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:45:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:45:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:45:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:45:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:45:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:45:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:45:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:45:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:45:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:45:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:45:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:45:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:45:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:45:19 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:45:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:45:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:45:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:45:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:45:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:45:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:45:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:45:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:45:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:45:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:45:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:45:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:45:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:45:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:45:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:45:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:45:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:45:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:20 IQ138000 wb-watchdog[25404]: [INFO] Interval #569 started. Waiting up to 60 seconds for error...
Oct 11 15:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:45:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2700] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2707] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2714] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2797] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2836] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2840] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2946] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2973] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.2997] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.3006] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.3009] Config: added 'scan_ssid' value '1'
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.3011] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.3022] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:45:45 IQ138000 NetworkManager[403]: <info>  [1760197545.3024] Config: added 'psk' value '<hidden>'
Oct 11 15:45:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/402
Oct 11 15:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:45:49 IQ138000 NetworkManager[403]: <info>  [1760197549.3776] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:45:49 IQ138000 NetworkManager[403]: <info>  [1760197549.3778] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:45:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:45:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:45:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:45:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:45:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:45:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:45:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:45:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:45:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:45:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:45:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:45:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:45:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:45:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:45:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:45:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:45:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:45:49 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:45:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:45:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:45:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:45:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:45:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:45:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:45:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:45:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:45:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:45:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:45:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:45:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:45:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:45:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:45:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:45:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:45:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:45:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:45:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:45:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:45:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:45:55 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 15:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:11 IQ138000 NetworkManager[403]: <warn>  [1760197571.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:46:11 IQ138000 NetworkManager[403]: <info>  [1760197571.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:46:11 IQ138000 NetworkManager[403]: <warn>  [1760197571.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:46:11 IQ138000 NetworkManager[403]: <info>  [1760197571.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:46:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/402
Oct 11 15:46:11 IQ138000 NetworkManager[403]: <info>  [1760197571.0826] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:46:11 IQ138000 NetworkManager[403]: <info>  [1760197571.0829] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:46:17 IQ138000 NetworkManager[403]: <info>  [1760197577.0057] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:46:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:46:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:46:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:46:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:46:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:46:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:46:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:46:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:46:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:46:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:46:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:46:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:46:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:46:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:46:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:46:19 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:46:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:46:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:46:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:46:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:46:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:46:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:46:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:46:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:46:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:46:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:46:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:46:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:46:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:46:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:46:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:46:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:46:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:46:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:46:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:46:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:46:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:46:20 IQ138000 wb-watchdog[26105]: [INFO] Interval #570 started. Waiting up to 60 seconds for error...
Oct 11 15:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:46:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:46:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:46:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:46:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:46:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:46:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:46:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:46:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:46:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:46:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:46:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:46:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:46:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:46:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:46:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:46:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:46:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:46:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:46:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:46:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:46:50 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:46:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:46:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:46:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:46:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:46:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:46:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:46:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:46:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:46:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:46:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:46:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:46:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:46:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:46:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:46:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:46:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:46:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:46:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:47:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9410] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9414] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9419] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9524] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9551] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9553] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9642] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9662] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9680] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9683] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9684] Config: added 'scan_ssid' value '1'
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9685] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9686] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:47:11 IQ138000 NetworkManager[403]: <info>  [1760197631.9687] Config: added 'psk' value '<hidden>'
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/403
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 NetworkManager[403]: <info>  [1760197632.1830] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:47:12 IQ138000 NetworkManager[403]: <info>  [1760197632.1832] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:47:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:47:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:47:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:47:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:47:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:47:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:47:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:47:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:47:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:47:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:47:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:47:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:47:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:47:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:47:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:47:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:47:20 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:47:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:47:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:47:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:47:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:47:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:47:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:47:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:47:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:47:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:47:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:47:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:47:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:47:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:47:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:47:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:47:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:47:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:47:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:47:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:47:20 IQ138000 wb-watchdog[26729]: [INFO] Interval #571 started. Waiting up to 60 seconds for error...
Oct 11 15:47:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:47:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:37 IQ138000 NetworkManager[403]: <warn>  [1760197657.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:47:37 IQ138000 NetworkManager[403]: <info>  [1760197657.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:47:37 IQ138000 NetworkManager[403]: <warn>  [1760197657.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:47:37 IQ138000 NetworkManager[403]: <info>  [1760197657.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:47:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/403
Oct 11 15:47:37 IQ138000 NetworkManager[403]: <info>  [1760197657.0690] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:47:37 IQ138000 NetworkManager[403]: <info>  [1760197657.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:47:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L2, row count 7183, limit 7042
Oct 11 15:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:47:42 IQ138000 NetworkManager[403]: <info>  [1760197662.7614] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:47:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 15:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:47:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:47:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:47:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:47:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:47:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:47:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:47:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:47:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:47:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:47:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:47:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:47:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:47:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:47:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:47:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:47:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:47:50 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:47:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:47:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:47:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:47:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:47:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:47:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:47:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:47:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:47:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:47:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:47:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:47:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:47:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:47:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:47:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:47:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:47:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:47:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:47:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:47:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:47:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:48:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:48:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:48:20 IQ138000 wb-watchdog[27417]: [INFO] Interval #572 started. Waiting up to 60 seconds for error...
Oct 11 15:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:48:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:48:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:48:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:48:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:48:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:48:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:48:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:48:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:48:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:48:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:48:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:48:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:48:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:48:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:48:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:48:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:48:20 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:48:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:48:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:48:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:48:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:48:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:48:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:48:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:48:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:48:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:48:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:48:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:48:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:48:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:48:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:48:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:48:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:48:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:48:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:48:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:48:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:48:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6724] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6729] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6737] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6832] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6857] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6861] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.6993] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7014] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7033] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7036] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7038] Config: added 'scan_ssid' value '1'
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7039] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7040] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7041] Config: added 'psk' value '<hidden>'
Oct 11 15:48:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/404
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7776] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:48:37 IQ138000 NetworkManager[403]: <info>  [1760197717.7778] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:48:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:48:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:48:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:48:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:48:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:48:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:48:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:48:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:48:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:48:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:48:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:48:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:48:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:48:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:48:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:48:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:48:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:48:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:48:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:48:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:48:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:48:50 IQ138000 python3[2000]:            |       signal quality: 90% (recent)
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:48:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:48:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:48:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:48:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:48:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:48:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:48:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:48:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:48:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:48:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:48:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:48:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:48:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:48:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:48:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:48:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:48:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:48:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:48:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:48:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:48:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:49:03 IQ138000 NetworkManager[403]: <warn>  [1760197743.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:49:03 IQ138000 NetworkManager[403]: <info>  [1760197743.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:49:03 IQ138000 NetworkManager[403]: <warn>  [1760197743.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:49:03 IQ138000 NetworkManager[403]: <info>  [1760197743.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:49:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/404
Oct 11 15:49:03 IQ138000 NetworkManager[403]: <info>  [1760197743.0644] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:49:03 IQ138000 NetworkManager[403]: <info>  [1760197743.0646] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:49:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:49:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:49:09 IQ138000 NetworkManager[403]: <info>  [1760197749.3776] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 15:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 15:49:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 15:49:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 15:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:20 IQ138000 wb-watchdog[28029]: [INFO] Interval #573 started. Waiting up to 60 seconds for error...
Oct 11 15:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:49:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:49:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:49:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:49:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:49:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:49:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:49:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:49:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:49:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:49:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:49:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:49:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:49:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:49:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:49:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:49:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:49:21 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:49:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:49:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:49:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:49:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:49:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:49:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:49:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:49:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:49:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:49:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:49:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:49:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:49:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:49:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:49:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:49:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:49:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:49:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:49:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:49:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:49:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:49:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:49:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:49:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:49:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:49:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:49:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:49:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:49:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:49:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:49:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:49:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:49:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:49:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:49:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:49:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:49:51 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:49:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:49:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:49:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:49:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:49:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:49:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:49:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:49:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:49:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:49:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:49:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:49:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:49:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:49:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:49:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:49:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:49:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:49:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:49:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6238] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6243] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6267] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6382] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6403] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6405] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6565] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6585] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6604] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6609] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6611] Config: added 'scan_ssid' value '1'
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6612] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6613] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.6614] Config: added 'psk' value '<hidden>'
Oct 11 15:50:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/405
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.7423] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:50:04 IQ138000 NetworkManager[403]: <info>  [1760197804.7425] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:20 IQ138000 wb-watchdog[28723]: [INFO] Interval #574 started. Waiting up to 60 seconds for error...
Oct 11 15:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:50:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:50:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:50:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:50:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:50:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:50:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:50:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:50:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:50:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:50:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:50:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:50:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:50:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:50:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:50:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:50:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:50:21 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:50:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:50:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:50:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:50:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:50:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:50:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:50:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:50:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:50:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:50:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:50:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:50:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:50:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:50:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:50:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:50:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:50:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:50:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:50:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:30 IQ138000 NetworkManager[403]: <warn>  [1760197830.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:50:30 IQ138000 NetworkManager[403]: <info>  [1760197830.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:50:30 IQ138000 NetworkManager[403]: <warn>  [1760197830.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:50:30 IQ138000 NetworkManager[403]: <info>  [1760197830.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:50:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/405
Oct 11 15:50:30 IQ138000 NetworkManager[403]: <info>  [1760197830.0699] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:50:30 IQ138000 NetworkManager[403]: <info>  [1760197830.0701] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:36 IQ138000 NetworkManager[403]: <info>  [1760197836.3493] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:50:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:50:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:50:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:50:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:50:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:50:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:50:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:50:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:50:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:50:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:50:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:50:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:50:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:50:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:50:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:50:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:50:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:50:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:50:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:50:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:50:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:50:51 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:50:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:50:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:50:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:50:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:50:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:50:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:50:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:50:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:50:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:50:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:50:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:50:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:50:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:50:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:50:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:50:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:50:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:50:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:50:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:51:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:51:20 IQ138000 wb-watchdog[29347]: [INFO] Interval #575 started. Waiting up to 60 seconds for error...
Oct 11 15:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:51:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:51:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:51:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:51:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:51:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:51:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:51:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:51:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:51:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:51:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:51:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:51:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:51:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:51:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:51:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:51:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:51:21 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:51:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:51:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:51:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:51:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:51:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:51:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:51:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:51:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:51:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:51:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:51:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:51:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:51:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:51:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:51:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:51:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:51:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:51:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:51:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:51:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5243] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5257] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5266] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5341] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5374] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5376] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5482] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5503] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5522] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5526] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5527] Config: added 'scan_ssid' value '1'
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5528] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5529] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.5530] Config: added 'psk' value '<hidden>'
Oct 11 15:51:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/406
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.6319] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:51:31 IQ138000 NetworkManager[403]: <info>  [1760197891.6321] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:51:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:51:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:51:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:51:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:51:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:51:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:51:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:51:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:51:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:51:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:51:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:51:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:51:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:51:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:51:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:51:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:51:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:51:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:51:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:51:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:51:52 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:51:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:51:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:51:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:51:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:51:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:51:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:51:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:51:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:51:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:51:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:51:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:51:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:51:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:51:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:51:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:51:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:51:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:51:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:51:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:51:57 IQ138000 NetworkManager[403]: <warn>  [1760197917.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:51:57 IQ138000 NetworkManager[403]: <info>  [1760197917.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:51:57 IQ138000 NetworkManager[403]: <warn>  [1760197917.0238] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:51:57 IQ138000 NetworkManager[403]: <info>  [1760197917.0251] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:51:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/406
Oct 11 15:51:57 IQ138000 NetworkManager[403]: <info>  [1760197917.0689] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:51:57 IQ138000 NetworkManager[403]: <info>  [1760197917.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:52:03 IQ138000 NetworkManager[403]: <info>  [1760197923.2652] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:52:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:52:20 IQ138000 wb-watchdog[30045]: [INFO] Interval #576 started. Waiting up to 60 seconds for error...
Oct 11 15:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:52:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:52:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:52:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:52:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:52:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:52:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:52:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:52:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:52:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:52:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:52:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:52:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:52:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:52:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:52:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:52:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:52:22 IQ138000 python3[2000]:            |       signal quality: 87% (recent)
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:52:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:52:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:52:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:52:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:52:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:52:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:52:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:52:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:52:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:52:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:52:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:52:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:52:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:52:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:52:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:52:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:52:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:52:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:52:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:52:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:52:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:52:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:52:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:52:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:52:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:52:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:52:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:52:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:52:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:52:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:52:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:52:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:52:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:52:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:52:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:52:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:52:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:52:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:52:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:52:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:52:52 IQ138000 python3[2000]:            |       signal quality: 80% (recent)
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:52:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:52:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:52:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:52:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:52:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:52:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:52:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:52:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:52:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:52:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:52:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:52:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:52:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:52:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:52:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:52:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:52:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:52:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:52:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:52:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:52:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.3838] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.3870] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.3878] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.3944] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.3966] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.3968] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4092] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4130] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4165] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4229] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4244] Config: added 'scan_ssid' value '1'
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4257] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4270] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.4283] Config: added 'psk' value '<hidden>'
Oct 11 15:52:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/407
Oct 11 15:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.5100] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:52:58 IQ138000 NetworkManager[403]: <info>  [1760197978.5102] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 15:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:53:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:53:20 IQ138000 wb-watchdog[30653]: [INFO] Interval #577 started. Waiting up to 60 seconds for error...
Oct 11 15:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:53:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:53:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:53:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:53:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:53:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:53:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:53:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:53:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:53:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:53:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:53:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:53:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:53:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:53:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:53:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:53:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:53:22 IQ138000 python3[2000]:            |       signal quality: 80% (recent)
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:53:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:53:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:53:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:53:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:53:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:53:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:53:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:53:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:53:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:53:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:53:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:53:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:53:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:53:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:53:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:53:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:53:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:53:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:53:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:53:24 IQ138000 NetworkManager[403]: <warn>  [1760198004.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:53:24 IQ138000 NetworkManager[403]: <info>  [1760198004.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:53:24 IQ138000 NetworkManager[403]: <warn>  [1760198004.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:53:24 IQ138000 NetworkManager[403]: <info>  [1760198004.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:53:24 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:53:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/407
Oct 11 15:53:24 IQ138000 NetworkManager[403]: <info>  [1760198004.0695] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:53:24 IQ138000 NetworkManager[403]: <info>  [1760198004.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:24 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:53:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:53:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:30 IQ138000 NetworkManager[403]: <info>  [1760198010.1415] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:53:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:53:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:53:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:53:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:53:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:53:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:53:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:53:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:53:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:53:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:53:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:53:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:53:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:53:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:53:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:53:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:53:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:53:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:53:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:53:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:53:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:53:53 IQ138000 python3[2000]:            |       signal quality: 80% (recent)
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:53:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:53:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:53:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:53:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:53:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:53:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:53:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:53:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:53:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:53:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:53:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:53:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:53:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:53:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:53:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:53:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:53:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:53:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:53:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:53:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:54:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 15:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:54:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:20 IQ138000 wb-watchdog[31363]: [INFO] Interval #578 started. Waiting up to 60 seconds for error...
Oct 11 15:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:54:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:54:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:54:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:54:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:54:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:54:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:54:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:54:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:54:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:54:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:54:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:54:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:54:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:54:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:54:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:54:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:54:23 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:54:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:54:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:54:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:54:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:54:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:54:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:54:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:54:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:54:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:54:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:54:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:54:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:54:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:54:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:54:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:54:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:54:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:54:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:54:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3298] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3303] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3309] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3366] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3383] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3384] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3470] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3493] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3512] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3516] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3517] Config: added 'scan_ssid' value '1'
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3518] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3519] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:54:25 IQ138000 NetworkManager[403]: <info>  [1760198065.3520] Config: added 'psk' value '<hidden>'
Oct 11 15:54:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/408
Oct 11 15:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 15:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:29 IQ138000 NetworkManager[403]: <info>  [1760198069.4400] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:54:29 IQ138000 NetworkManager[403]: <info>  [1760198069.4402] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:54:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:54:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:54:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:51 IQ138000 NetworkManager[403]: <warn>  [1760198091.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:54:51 IQ138000 NetworkManager[403]: <info>  [1760198091.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:54:51 IQ138000 NetworkManager[403]: <warn>  [1760198091.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:54:51 IQ138000 NetworkManager[403]: <info>  [1760198091.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:54:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/408
Oct 11 15:54:51 IQ138000 NetworkManager[403]: <info>  [1760198091.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:54:51 IQ138000 NetworkManager[403]: <info>  [1760198091.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:54:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:54:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:54:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:54:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:54:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:54:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:54:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:54:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:54:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:54:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:54:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:54:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:54:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:54:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:54:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:54:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:54:53 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:54:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:54:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:54:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:54:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:54:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:54:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:54:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:54:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:54:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:54:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:54:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:54:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:54:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:54:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:54:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:54:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:54:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:54:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:54:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:54:57 IQ138000 NetworkManager[403]: <info>  [1760198097.0972] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:55:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13316 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:55:01 IQ138000 CRON[31735]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 15:55:01 IQ138000 CRON[31739]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 15:55:01 IQ138000 CRON[31735]: pam_unix(cron:session): session closed for user root
Oct 11 15:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:16 IQ138000 npm[3801]: [2025-10-11 15:55:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":57.1,"last_seen":1760198116146,"linkquality":83,"power_outage_count":25795,"pressure":992.2,"temperature":22.78,"voltage":2995}'
Oct 11 15:55:16 IQ138000 npm[3801]: [2025-10-11 15:55:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":58.92,"last_seen":1760198116165,"linkquality":83,"power_outage_count":25795,"pressure":992.2,"temperature":22.78,"voltage":2995}'
Oct 11 15:55:16 IQ138000 npm[3801]: [2025-10-11 15:55:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":58.92,"last_seen":1760198116165,"linkquality":83,"power_outage_count":25795,"pressure":992,"temperature":22.78,"voltage":2995}'
Oct 11 15:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:20 IQ138000 wb-watchdog[31972]: [INFO] Interval #579 started. Waiting up to 60 seconds for error...
Oct 11 15:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:55:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:55:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:55:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:55:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:55:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:55:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:55:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:55:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:55:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:55:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:55:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:55:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:55:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:55:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:55:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:55:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:55:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:55:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:55:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:55:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:55:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:55:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:55:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:55:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:55:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:55:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:55:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:55:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:55:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:55:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:55:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:55:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:55:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:55:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:55:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:55:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:55:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:55:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3315] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3320] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3327] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3383] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3403] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3405] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3492] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3532] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3561] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3565] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3566] Config: added 'scan_ssid' value '1'
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3567] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3568] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.3569] Config: added 'psk' value '<hidden>'
Oct 11 15:55:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/409
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.4342] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:55:52 IQ138000 NetworkManager[403]: <info>  [1760198152.4345] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:55:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:55:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:55:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:55:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:55:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:55:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:55:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:55:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:55:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:55:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:55:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:55:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:55:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:55:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:55:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:55:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:55:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:55:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:55:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:55:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:55:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:55:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:55:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:55:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:55:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:55:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:55:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:55:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:55:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:55:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:55:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:55:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:55:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:55:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:55:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:55:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:55:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:55:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:55:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:00 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 15:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:18 IQ138000 NetworkManager[403]: <warn>  [1760198178.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:56:18 IQ138000 NetworkManager[403]: <info>  [1760198178.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:56:18 IQ138000 NetworkManager[403]: <warn>  [1760198178.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:56:18 IQ138000 NetworkManager[403]: <info>  [1760198178.0276] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:56:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/409
Oct 11 15:56:18 IQ138000 NetworkManager[403]: <info>  [1760198178.0697] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:56:18 IQ138000 NetworkManager[403]: <info>  [1760198178.0700] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:56:20 IQ138000 wb-watchdog[32687]: [INFO] Interval #580 started. Waiting up to 60 seconds for error...
Oct 11 15:56:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:56:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:56:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:56:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:56:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:56:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:56:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:56:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:56:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:56:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:56:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:56:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:56:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:56:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:56:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:56:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:56:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:56:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:56:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:56:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:56:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:56:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:56:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:56:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:56:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:56:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:56:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:56:24 IQ138000 NetworkManager[403]: <info>  [1760198184.1391] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:56:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:56:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:56:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:56:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:56:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:56:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:56:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:56:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:56:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:56:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:56:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:56:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:56:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:56:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:56:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:56:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:56:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:56:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:56:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:56:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:56:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:56:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:56:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:56:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:56:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:56:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:56:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:56:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:56:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:56:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:56:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:56:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:56:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:56:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:56:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:56:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:56:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:56:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:56:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:56:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:56:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:56:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:56:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:56:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:56:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4644 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3241] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3245] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3251] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3306] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3324] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3326] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3416] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3438] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3457] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3460] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3462] Config: added 'scan_ssid' value '1'
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3463] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3464] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.3465] Config: added 'psk' value '<hidden>'
Oct 11 15:57:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/410
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.4256] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:57:19 IQ138000 NetworkManager[403]: <info>  [1760198239.4259] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:20 IQ138000 wb-watchdog[861]: [INFO] Interval #581 started. Waiting up to 60 seconds for error...
Oct 11 15:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:57:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:57:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:57:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:57:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:57:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:57:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:57:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:57:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:57:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:57:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:57:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:57:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:57:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:57:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:57:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:57:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:57:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:57:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:57:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:57:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:57:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:57:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:57:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:57:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:57:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:57:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:57:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:57:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:57:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:57:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:57:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:57:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:57:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:57:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:57:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:57:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:57:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:57:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:45 IQ138000 NetworkManager[403]: <warn>  [1760198265.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:57:45 IQ138000 NetworkManager[403]: <info>  [1760198265.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:57:45 IQ138000 NetworkManager[403]: <warn>  [1760198265.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:57:45 IQ138000 NetworkManager[403]: <info>  [1760198265.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:57:45 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:57:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/410
Oct 11 15:57:45 IQ138000 NetworkManager[403]: <info>  [1760198265.0690] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:57:45 IQ138000 NetworkManager[403]: <info>  [1760198265.0692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:45 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 15:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:57:51 IQ138000 NetworkManager[403]: <info>  [1760198271.1039] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:57:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:57:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:57:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:57:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:57:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:57:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:57:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:57:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:57:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:57:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:57:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:57:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:57:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:57:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:57:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:57:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:57:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:57:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:57:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:57:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:57:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:57:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:57:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:57:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:57:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:57:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:57:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:57:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:57:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:57:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:57:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:57:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:57:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:57:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:57:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:57:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:57:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:57:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:57:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 15:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 15:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 15:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:58:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:58:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:58:20 IQ138000 wb-watchdog[1542]: [INFO] Interval #582 started. Waiting up to 60 seconds for error...
Oct 11 15:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:58:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:58:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:58:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:58:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:58:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:58:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:58:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:58:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:58:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:58:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:58:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:58:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:58:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:58:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:58:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:58:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:58:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:58:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:58:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:58:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:58:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:58:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:58:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:58:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:58:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:58:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:58:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:58:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:58:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:58:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:58:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:58:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:58:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:58:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:58:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:58:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:58:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3378] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3383] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3389] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3475] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3514] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3516] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3628] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3654] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3677] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3682] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3693] Config: added 'scan_ssid' value '1'
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3702] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3706] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 15:58:46 IQ138000 NetworkManager[403]: <info>  [1760198326.3709] Config: added 'psk' value '<hidden>'
Oct 11 15:58:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/411
Oct 11 15:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:50 IQ138000 NetworkManager[403]: <info>  [1760198330.4554] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 15:58:50 IQ138000 NetworkManager[403]: <info>  [1760198330.4557] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 15:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:58:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:58:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:58:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:58:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:58:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:58:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:58:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:58:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:58:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:58:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:58:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:58:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:58:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:58:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:58:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:58:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:58:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:58:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:58:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:58:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:58:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:58:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:58:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:58:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:58:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:58:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:58:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:58:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:58:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:58:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:58:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:58:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:58:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:58:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:58:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:58:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:58:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 15:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:59:12 IQ138000 NetworkManager[403]: <warn>  [1760198352.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 15:59:12 IQ138000 NetworkManager[403]: <info>  [1760198352.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 15:59:12 IQ138000 NetworkManager[403]: <warn>  [1760198352.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 15:59:12 IQ138000 NetworkManager[403]: <info>  [1760198352.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 15:59:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/411
Oct 11 15:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 15:59:12 IQ138000 NetworkManager[403]: <info>  [1760198352.2009] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 15:59:12 IQ138000 NetworkManager[403]: <info>  [1760198352.2011] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 15:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 15:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:59:18 IQ138000 NetworkManager[403]: <info>  [1760198358.1385] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 15:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 15:59:20 IQ138000 wb-watchdog[2220]: [INFO] Interval #583 started. Waiting up to 60 seconds for error...
Oct 11 15:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:59:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:59:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:59:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:59:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:59:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:59:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:59:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:59:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:59:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:59:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:59:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:59:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:59:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:59:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:59:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:59:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:59:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:59:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:59:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:59:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:59:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:59:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:59:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:59:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:59:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:59:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:59:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:59:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:59:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:59:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:59:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:59:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:59:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:59:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:59:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:59:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:59:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:59:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:59:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 15:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 15:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L3, row count 7183, limit 7042
Oct 11 15:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 15:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 15:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 15:59:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 15:59:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 15:59:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 9220 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 15:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 15:59:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 15:59:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 15:59:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 15:59:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 15:59:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 15:59:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 15:59:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 15:59:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 15:59:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 15:59:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 15:59:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 15:59:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 15:59:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 15:59:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 15:59:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 15:59:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 15:59:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 15:59:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 15:59:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 15:59:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 15:59:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 15:59:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 15:59:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 15:59:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:59:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 15:59:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 15:59:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 15:59:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:59:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 15:59:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 15:59:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 15:59:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 15:59:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 15:59:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 15:59:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 15:59:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 15:59:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 15:59:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 15:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:00:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:00:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.2796] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.2804] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.2810] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.2878] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.2922] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.2924] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3081] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3114] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3152] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3156] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3157] Config: added 'scan_ssid' value '1'
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3158] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3159] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3160] Config: added 'psk' value '<hidden>'
Oct 11 16:00:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/412
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3885] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:00:13 IQ138000 NetworkManager[403]: <info>  [1760198413.3887] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:20 IQ138000 wb-watchdog[2944]: [INFO] Interval #584 started. Waiting up to 60 seconds for error...
Oct 11 16:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:00:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:00:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:00:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:00:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:00:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:00:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:00:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:00:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:00:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:00:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:00:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:00:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:00:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:00:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:00:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:00:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:00:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:00:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:00:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:00:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:00:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:00:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:00:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:00:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:00:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:00:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:00:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:00:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:00:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:00:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:00:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:00:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:00:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:00:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:00:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:00:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:00:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:00:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:39 IQ138000 NetworkManager[403]: <warn>  [1760198439.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:00:39 IQ138000 NetworkManager[403]: <info>  [1760198439.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:00:39 IQ138000 NetworkManager[403]: <warn>  [1760198439.0258] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:00:39 IQ138000 NetworkManager[403]: <info>  [1760198439.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:00:39 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:00:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/412
Oct 11 16:00:39 IQ138000 NetworkManager[403]: <info>  [1760198439.0832] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:00:39 IQ138000 NetworkManager[403]: <info>  [1760198439.0834] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:39 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:45 IQ138000 NetworkManager[403]: <info>  [1760198445.0560] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:00:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:00:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:00:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:00:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:00:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:00:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:00:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:00:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:00:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:00:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:00:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:00:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:00:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:00:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:00:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:00:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:00:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:00:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:00:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:00:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:00:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:00:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:00:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:00:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:00:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:00:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:00:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:00:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:00:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:00:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:00:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:00:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:00:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:00:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:01:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:01:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:20 IQ138000 wb-watchdog[3582]: [INFO] Interval #585 started. Waiting up to 60 seconds for error...
Oct 11 16:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:01:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:01:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:01:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:01:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:01:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:01:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:01:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:01:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:01:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:01:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:01:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:01:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:01:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:01:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:01:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:01:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:01:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:01:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:01:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:01:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:01:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:01:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:01:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:01:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:01:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:01:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:01:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:01:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:01:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:01:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:01:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:01:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:01:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:01:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:01:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:01:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2570] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2575] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2582] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2674] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2702] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2706] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2810] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2852] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2897] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2902] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2904] Config: added 'scan_ssid' value '1'
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2905] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2906] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:01:40 IQ138000 NetworkManager[403]: <info>  [1760198500.2907] Config: added 'psk' value '<hidden>'
Oct 11 16:01:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/413
Oct 11 16:01:44 IQ138000 NetworkManager[403]: <info>  [1760198504.3986] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:01:44 IQ138000 NetworkManager[403]: <info>  [1760198504.3988] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:01:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:01:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:01:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:01:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:01:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:01:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:01:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:01:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:01:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:01:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:01:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:01:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:01:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:01:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:01:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:01:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:01:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:01:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:01:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:01:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:01:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:01:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:01:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:01:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:01:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:01:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:01:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:01:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:01:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:01:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:01:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:01:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:01:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:01:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:01:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:01:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:01:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:01:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:01:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:01:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:06 IQ138000 NetworkManager[403]: <warn>  [1760198526.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:02:06 IQ138000 NetworkManager[403]: <info>  [1760198526.0240] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:02:06 IQ138000 NetworkManager[403]: <warn>  [1760198526.0279] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:02:06 IQ138000 NetworkManager[403]: <info>  [1760198526.0286] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:02:06 IQ138000 NetworkManager[403]: <info>  [1760198526.0287] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:02:06 IQ138000 NetworkManager[403]: <info>  [1760198526.0303] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:02:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/413
Oct 11 16:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:02:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 NetworkManager[403]: <info>  [1760198532.1091] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:02:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:20 IQ138000 wb-watchdog[4304]: [INFO] Interval #586 started. Waiting up to 60 seconds for error...
Oct 11 16:02:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:02:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:02:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:02:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:02:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:02:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:02:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:02:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:02:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:02:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:02:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:02:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:02:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:02:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:02:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:02:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:02:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:02:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:02:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:02:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:02:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:02:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:02:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:02:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:02:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:02:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:02:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:02:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:02:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:02:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:02:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:02:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:02:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:02:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:02:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:02:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:02:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13060 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:02:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:02:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:02:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:02:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:02:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:02:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:02:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:02:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:02:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:02:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:02:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:02:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:02:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:02:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:02:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:02:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:02:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:02:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:02:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:02:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:02:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:02:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:02:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:02:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:02:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:02:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:02:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:02:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:02:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:02:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:02:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:02:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:02:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:02:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:02:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:02:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:02:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3226] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3231] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3238] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3339] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3361] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3362] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3460] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3529] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3569] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3573] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3575] Config: added 'scan_ssid' value '1'
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3576] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3577] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:03:07 IQ138000 NetworkManager[403]: <info>  [1760198587.3578] Config: added 'psk' value '<hidden>'
Oct 11 16:03:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/414
Oct 11 16:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:03:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:10 IQ138000 NetworkManager[403]: <info>  [1760198590.4490] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:03:10 IQ138000 NetworkManager[403]: <info>  [1760198590.4492] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:03:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:03:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:03:20 IQ138000 wb-watchdog[4931]: [INFO] Interval #587 started. Waiting up to 60 seconds for error...
Oct 11 16:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:03:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:03:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:03:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:03:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:03:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:03:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:03:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:03:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:03:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:03:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:03:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:03:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:03:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:03:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:03:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:03:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:03:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:03:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:03:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:03:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:03:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:03:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:03:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:03:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:03:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:03:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:03:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:03:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:03:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:03:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:03:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:03:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:03:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:03:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:03:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:03:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:03:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:33 IQ138000 NetworkManager[403]: <warn>  [1760198613.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:03:33 IQ138000 NetworkManager[403]: <info>  [1760198613.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:03:33 IQ138000 NetworkManager[403]: <warn>  [1760198613.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:03:33 IQ138000 NetworkManager[403]: <info>  [1760198613.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:03:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/414
Oct 11 16:03:33 IQ138000 NetworkManager[403]: <info>  [1760198613.0664] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:03:33 IQ138000 NetworkManager[403]: <info>  [1760198613.0669] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:03:39 IQ138000 NetworkManager[403]: <info>  [1760198619.0646] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:03:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:03:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:03:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:03:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:03:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:03:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:03:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:03:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:03:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:03:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:03:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:03:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:03:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:03:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:03:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:03:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:03:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:03:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:03:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:03:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:03:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:03:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:03:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:03:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:03:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:03:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:03:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:03:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:03:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:03:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:03:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:03:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:03:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:03:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:03:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:03:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:03:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:03:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:03:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:03:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:03:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:04:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:04:20 IQ138000 wb-watchdog[5656]: [INFO] Interval #588 started. Waiting up to 60 seconds for error...
Oct 11 16:04:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:04:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:04:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:04:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:04:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:04:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:04:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:04:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:04:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:04:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:04:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:04:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:04:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:04:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:04:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:04:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:04:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:04:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:04:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:04:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:04:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:04:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:04:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:04:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:04:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:04:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:04:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:04:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:04:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:04:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:04:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:04:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:04:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:04:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:04:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:04:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:04:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5263] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5268] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5275] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5328] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5345] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5347] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5437] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5460] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5481] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5484] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5486] Config: added 'scan_ssid' value '1'
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5487] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5488] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.5489] Config: added 'psk' value '<hidden>'
Oct 11 16:04:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/415
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.6219] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:04:34 IQ138000 NetworkManager[403]: <info>  [1760198674.6221] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:04:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:04:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:04:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:04:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:04:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:04:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:04:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:04:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:04:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:04:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:04:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:04:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:04:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:04:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:04:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:04:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:04:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:04:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:04:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:04:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:04:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:04:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:04:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:04:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:04:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:04:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:04:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:04:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:04:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:04:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:04:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:04:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:04:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:04:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:04:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:04:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:04:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:04:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:04:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:04:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:00 IQ138000 NetworkManager[403]: <warn>  [1760198700.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:05:00 IQ138000 NetworkManager[403]: <info>  [1760198700.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:05:00 IQ138000 NetworkManager[403]: <warn>  [1760198700.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:05:00 IQ138000 NetworkManager[403]: <info>  [1760198700.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:05:00 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:05:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/415
Oct 11 16:05:00 IQ138000 NetworkManager[403]: <info>  [1760198700.0685] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:05:00 IQ138000 NetworkManager[403]: <info>  [1760198700.0687] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:00 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:05:01 IQ138000 CRON[6029]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:05:01 IQ138000 CRON[6033]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 16:05:01 IQ138000 CRON[6029]: pam_unix(cron:session): session closed for user root
Oct 11 16:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:06 IQ138000 NetworkManager[403]: <info>  [1760198706.2421] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:05:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:05:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:05:20 IQ138000 wb-watchdog[6291]: [INFO] Interval #589 started. Waiting up to 60 seconds for error...
Oct 11 16:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:05:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:05:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:05:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:05:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:05:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:05:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:05:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:05:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:05:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:05:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:05:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:05:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:05:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:05:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:05:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:05:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:05:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:05:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:05:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:05:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:05:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:05:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:05:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:05:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:05:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:05:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:05:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:05:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:05:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:05:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:05:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:05:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:05:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:05:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:05:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:05:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:05:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:05:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:05:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:05:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:05:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:05:39 IQ138000 npm[3801]: [2025-10-11 16:05:39] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.04,"last_seen":1760198739094,"linkquality":109,"power_outage_count":48745,"temperature":27.57,"voltage":3025}'
Oct 11 16:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:05:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:05:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:05:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:05:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:05:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:05:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:05:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:05:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:05:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:05:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:05:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:05:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:05:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:05:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:05:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:05:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:05:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:05:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:05:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:05:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:05:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:05:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:05:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:05:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:05:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:05:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:05:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:05:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:05:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:05:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:05:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:05:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:05:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:05:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:05:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:05:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:05:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.5690] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.5695] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.5705] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.5900] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.5919] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.5921] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6041] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6081] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6103] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6107] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6108] Config: added 'scan_ssid' value '1'
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6109] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6110] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6112] Config: added 'psk' value '<hidden>'
Oct 11 16:06:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/416
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6816] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:06:01 IQ138000 NetworkManager[403]: <info>  [1760198761.6829] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:06:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:06:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:07 IQ138000 NetworkManager[403]: <info>  [1760198767.9401] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:06:07 IQ138000 NetworkManager[403]: <info>  [1760198767.9404] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:06:16 IQ138000 NetworkManager[403]: <info>  [1760198776.3859] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:06:16 IQ138000 NetworkManager[403]: <info>  [1760198776.3861] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9494 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:06:20 IQ138000 wb-watchdog[6994]: [INFO] Interval #590 started. Waiting up to 60 seconds for error...
Oct 11 16:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:27 IQ138000 NetworkManager[403]: <warn>  [1760198787.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:06:27 IQ138000 NetworkManager[403]: <info>  [1760198787.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:06:27 IQ138000 NetworkManager[403]: <warn>  [1760198787.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:06:27 IQ138000 NetworkManager[403]: <info>  [1760198787.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:06:27 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:06:27 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/416
Oct 11 16:06:27 IQ138000 NetworkManager[403]: <info>  [1760198787.0669] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:06:27 IQ138000 NetworkManager[403]: <info>  [1760198787.0670] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:27 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:06:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:06:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:06:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:06:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:06:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:06:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:06:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:06:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:06:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:06:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:06:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:06:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:06:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:06:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:06:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:06:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:06:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:06:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:06:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:06:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:06:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:06:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:06:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:06:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:06:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:06:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:06:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:06:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:06:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:06:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:06:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:06:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:06:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:06:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:06:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:06:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:06:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:33 IQ138000 NetworkManager[403]: <info>  [1760198793.3558] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:06:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:06:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:06:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:06:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L3, row count 7183, limit 7042
Oct 11 16:06:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:06:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:06:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:06:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:06:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:06:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:06:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:06:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:06:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:06:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:06:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:06:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:06:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:06:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:06:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:06:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:06:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:06:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:06:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:06:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:06:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:06:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:06:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:06:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:06:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:06:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:06:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:06:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:06:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:06:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:06:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:06:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:06:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:06:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:06:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:06:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:06:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:06:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:20 IQ138000 wb-watchdog[7626]: [INFO] Interval #591 started. Waiting up to 60 seconds for error...
Oct 11 16:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7069] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7074] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7086] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7180] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7205] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7207] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7356] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7385] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7418] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7434] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7446] Config: added 'scan_ssid' value '1'
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7456] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7468] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:07:28 IQ138000 NetworkManager[403]: <info>  [1760198848.7479] Config: added 'psk' value '<hidden>'
Oct 11 16:07:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/417
Oct 11 16:07:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:07:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:07:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:07:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:07:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:07:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:07:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:07:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:07:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:07:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:07:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:07:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:07:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:07:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:07:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:07:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:07:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:07:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:07:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:07:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:07:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:07:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:07:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:07:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:07:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:07:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:07:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:07:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:07:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:07:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:07:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:07:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:07:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:07:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:07:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:30 IQ138000 NetworkManager[403]: <info>  [1760198850.8344] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:07:30 IQ138000 NetworkManager[403]: <info>  [1760198850.8346] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:07:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:07:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:07:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:07:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:54 IQ138000 NetworkManager[403]: <warn>  [1760198874.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:07:54 IQ138000 NetworkManager[403]: <info>  [1760198874.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:07:54 IQ138000 NetworkManager[403]: <warn>  [1760198874.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:07:54 IQ138000 NetworkManager[403]: <info>  [1760198874.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:07:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/417
Oct 11 16:07:54 IQ138000 NetworkManager[403]: <info>  [1760198874.0666] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:07:54 IQ138000 NetworkManager[403]: <info>  [1760198874.0667] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:07:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:07:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:07:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:07:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:07:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:07:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:07:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:07:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:07:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:07:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:07:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:07:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:07:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:07:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:07:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:07:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:07:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:07:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:07:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:07:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:07:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:07:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:07:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:07:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:07:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:07:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:07:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:07:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:07:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:07:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:07:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:07:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:07:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:07:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:07:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:07:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:07:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:07:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:07:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:07:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:07:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:07:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:00 IQ138000 NetworkManager[403]: <info>  [1760198880.4743] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:01 IQ138000 CRON[8082]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:08:01 IQ138000 CRON[8086]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 16:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:08:02 IQ138000 sSMTP[8111]: Unable to locate mail
Oct 11 16:08:02 IQ138000 sSMTP[8111]: Cannot open mail:25
Oct 11 16:08:02 IQ138000 cron[8111]: sendmail: Cannot open mail:25
Oct 11 16:08:02 IQ138000 CRON[8082]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 16:08:02 IQ138000 CRON[8082]: pam_unix(cron:session): session closed for user root
Oct 11 16:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:08:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:08:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:08:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:08:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:20 IQ138000 wb-watchdog[8327]: [INFO] Interval #592 started. Waiting up to 60 seconds for error...
Oct 11 16:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:08:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:08:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:08:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:08:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:08:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:08:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:08:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:08:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:08:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:08:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:08:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:08:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:08:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:08:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:08:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:08:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:08:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:08:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:08:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:08:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:08:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:08:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:08:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:08:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:08:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:08:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:08:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:08:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:08:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:08:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:08:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:08:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:08:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:08:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:08:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:08:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:08:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:08:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:08:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7492] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7496] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7504] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7558] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7584] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7586] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7685] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7708] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7727] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7731] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7732] Config: added 'scan_ssid' value '1'
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7733] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7735] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.7736] Config: added 'psk' value '<hidden>'
Oct 11 16:08:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/418
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.8418] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:08:55 IQ138000 NetworkManager[403]: <info>  [1760198935.8420] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:08:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:08:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:08:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:08:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:08:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:08:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:08:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:08:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:08:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:08:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:08:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:08:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:08:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:08:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:08:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:08:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:08:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:08:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:08:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:08:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:08:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:08:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:08:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:08:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:08:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:08:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:08:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:08:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:08:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:08:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:08:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:08:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:08:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:08:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:08:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:08:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:08:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5888 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:09:20 IQ138000 wb-watchdog[8946]: [INFO] Interval #593 started. Waiting up to 60 seconds for error...
Oct 11 16:09:21 IQ138000 NetworkManager[403]: <warn>  [1760198961.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:09:21 IQ138000 NetworkManager[403]: <info>  [1760198961.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:09:21 IQ138000 NetworkManager[403]: <warn>  [1760198961.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:09:21 IQ138000 NetworkManager[403]: <info>  [1760198961.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:09:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/418
Oct 11 16:09:21 IQ138000 NetworkManager[403]: <info>  [1760198961.0696] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:09:21 IQ138000 NetworkManager[403]: <info>  [1760198961.0699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:09:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:09:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:27 IQ138000 NetworkManager[403]: <info>  [1760198967.5144] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:09:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:09:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:09:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:09:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:09:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:09:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:09:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:09:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:09:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:09:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:09:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:09:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:09:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:09:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:09:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:09:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:09:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:09:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:09:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:09:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:09:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:09:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:09:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:09:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:09:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:09:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:09:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:09:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:09:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:09:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:09:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:09:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:09:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:09:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:09:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:09:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:09:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 S energy L1, row count 7183, limit 7042
Oct 11 16:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 16:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:09:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:09:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:09:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:09:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:09:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:09:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:09:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:09:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:09:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:09:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:09:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:09:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:09:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:09:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:09:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:09:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:09:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:09:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:09:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:09:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:09:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:09:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:09:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:09:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:09:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:09:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:09:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:09:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:09:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:09:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:09:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:09:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:09:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:09:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:09:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:09:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:09:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:09:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:10:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:10:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13318 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:10:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:10:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:10:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:10:20 IQ138000 wb-watchdog[9643]: [INFO] Interval #594 started. Waiting up to 60 seconds for error...
Oct 11 16:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:10:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:10:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7223] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7228] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7233] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7303] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7338] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7340] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7494] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7522] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7548] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7552] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7553] Config: added 'scan_ssid' value '1'
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7554] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7555] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.7556] Config: added 'psk' value '<hidden>'
Oct 11 16:10:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/419
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.8290] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:10:22 IQ138000 NetworkManager[403]: <info>  [1760199022.8305] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:10:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:10:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:10:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:10:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:10:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:10:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:10:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:10:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:10:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:10:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:10:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:10:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:10:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:10:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:10:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:10:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:10:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:10:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:10:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:10:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:10:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:10:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:10:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:10:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:10:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:10:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:10:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:10:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:10:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:10:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:10:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:10:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:10:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:10:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:10:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:10:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:10:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:10:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:48 IQ138000 NetworkManager[403]: <warn>  [1760199048.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:10:48 IQ138000 NetworkManager[403]: <info>  [1760199048.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:10:48 IQ138000 NetworkManager[403]: <warn>  [1760199048.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:10:48 IQ138000 NetworkManager[403]: <info>  [1760199048.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:10:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/419
Oct 11 16:10:48 IQ138000 NetworkManager[403]: <info>  [1760199048.0683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:10:48 IQ138000 NetworkManager[403]: <info>  [1760199048.0686] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:10:54 IQ138000 NetworkManager[403]: <info>  [1760199054.5100] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:10:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:10:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:11:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:11:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:11:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:11:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:11:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:11:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:11:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:11:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:11:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:11:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:11:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:11:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:11:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:11:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:11:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:11:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:11:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:11:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:11:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:11:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:11:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:11:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:11:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:11:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:11:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:11:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:11:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:11:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:11:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:11:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:11:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:11:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:11:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:11:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:11:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:11:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:11:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:11:20 IQ138000 wb-watchdog[10264]: [INFO] Interval #595 started. Waiting up to 60 seconds for error...
Oct 11 16:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:11:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:11:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:11:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:11:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:11:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:11:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:11:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:11:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:11:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:11:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:11:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:11:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:11:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:11:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:11:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:11:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:11:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:11:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:11:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:11:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:11:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:11:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:11:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:11:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:11:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:11:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:11:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:11:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:11:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:11:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:11:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:11:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:11:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:11:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:11:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:11:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:11:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:11:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5130 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L1, row count 7183, limit 7042
Oct 11 16:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8121] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8146] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8156] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8215] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8233] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8234] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8328] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8351] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8370] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8375] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8376] Config: added 'scan_ssid' value '1'
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8377] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8378] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.8379] Config: added 'psk' value '<hidden>'
Oct 11 16:11:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/420
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.9091] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:11:49 IQ138000 NetworkManager[403]: <info>  [1760199109.9093] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:11:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:11:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:12:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:12:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:12:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:12:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:12:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:12:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:12:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:12:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:12:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:12:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:12:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:12:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:12:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:12:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:12:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:12:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:12:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:12:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:12:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:12:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:12:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:12:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:12:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:12:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:12:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:12:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:12:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:12:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:12:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:12:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:12:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:12:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:12:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:12:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:12:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:12:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:12:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:12:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 16:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:12:15 IQ138000 NetworkManager[403]: <warn>  [1760199135.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:12:15 IQ138000 NetworkManager[403]: <info>  [1760199135.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:12:15 IQ138000 NetworkManager[403]: <warn>  [1760199135.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:12:15 IQ138000 NetworkManager[403]: <info>  [1760199135.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:12:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/420
Oct 11 16:12:15 IQ138000 NetworkManager[403]: <info>  [1760199135.0694] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:12:15 IQ138000 NetworkManager[403]: <info>  [1760199135.0696] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:12:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:12:20 IQ138000 wb-watchdog[10965]: [INFO] Interval #596 started. Waiting up to 60 seconds for error...
Oct 11 16:12:21 IQ138000 NetworkManager[403]: <info>  [1760199141.5954] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:12:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:12:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:12:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:12:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:12:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:12:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:12:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:12:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:12:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:12:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:12:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:12:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:12:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:12:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:12:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:12:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:12:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:12:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:12:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:12:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:12:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:12:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:12:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:12:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:12:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:12:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:12:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:12:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:12:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:12:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:12:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:12:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:12:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:12:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:12:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:12:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:12:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:12:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:12:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:12:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:12:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:12:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:12:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:12:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L1, row count 7183, limit 7042
Oct 11 16:12:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:12:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:13:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:13:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:13:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:13:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:13:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:13:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:13:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:13:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:13:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:13:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:13:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:13:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:13:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:13:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:13:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:13:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:13:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:13:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:13:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:13:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:13:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:13:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:13:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:13:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:13:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:13:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:13:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:13:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:13:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:13:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:13:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:13:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:13:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:13:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:13:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:13:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:13:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6259] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6263] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6269] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6360] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6379] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6384] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6474] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6500] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6525] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6528] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6533] Config: added 'scan_ssid' value '1'
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6535] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6537] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.6538] Config: added 'psk' value '<hidden>'
Oct 11 16:13:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/421
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.7221] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:13:16 IQ138000 NetworkManager[403]: <info>  [1760199196.7224] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:13:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:13:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:13:20 IQ138000 wb-watchdog[11576]: [INFO] Interval #597 started. Waiting up to 60 seconds for error...
Oct 11 16:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:13:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:13:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:13:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:13:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:13:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:13:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:13:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:13:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:13:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:13:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:13:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:13:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:13:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:13:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:13:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:13:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:13:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:13:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:13:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:13:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:13:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:13:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:13:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:13:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:13:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:13:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:13:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:13:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:13:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:13:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:13:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:13:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:13:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:13:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:13:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:13:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:42 IQ138000 NetworkManager[403]: <warn>  [1760199222.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:13:42 IQ138000 NetworkManager[403]: <info>  [1760199222.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:13:42 IQ138000 NetworkManager[403]: <warn>  [1760199222.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:13:42 IQ138000 NetworkManager[403]: <info>  [1760199222.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:13:42 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:13:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/421
Oct 11 16:13:42 IQ138000 NetworkManager[403]: <info>  [1760199222.0715] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:13:42 IQ138000 NetworkManager[403]: <info>  [1760199222.0717] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:13:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:48 IQ138000 NetworkManager[403]: <info>  [1760199228.3520] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:13:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:14:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:14:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:14:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:14:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:14:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:14:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:14:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:14:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:14:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:14:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:14:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:14:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:14:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:14:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:14:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:14:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:14:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:14:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:14:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:14:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:14:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:14:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:14:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:14:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:14:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:14:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:14:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:14:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:14:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:14:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:14:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:14:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:14:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:14:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:14:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:14:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:14:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:14:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 16:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:14:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:14:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:14:20 IQ138000 wb-watchdog[12281]: [INFO] Interval #598 started. Waiting up to 60 seconds for error...
Oct 11 16:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:14:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:14:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:14:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:14:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:14:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:14:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:14:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:14:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:14:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:14:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:14:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:14:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:14:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:14:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:14:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:14:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:14:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:14:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:14:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:14:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:14:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:14:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:14:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:14:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:14:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:14:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:14:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:14:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:14:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:14:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:14:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:14:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:14:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:14:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:14:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:14:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6501] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6525] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6532] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6586] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6606] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6609] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6701] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6723] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6755] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6759] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6760] Config: added 'scan_ssid' value '1'
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6761] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6762] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.6763] Config: added 'psk' value '<hidden>'
Oct 11 16:14:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/422
Oct 11 16:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.7552] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:14:43 IQ138000 NetworkManager[403]: <info>  [1760199283.7554] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:15:01 IQ138000 CRON[12646]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:15:01 IQ138000 CRON[12650]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 16:15:01 IQ138000 CRON[12646]: pam_unix(cron:session): session closed for user root
Oct 11 16:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:15:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:15:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:15:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:15:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:15:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:15:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:15:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:15:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:15:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:15:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:15:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:15:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:15:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:15:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:15:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:15:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:15:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:15:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:15:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:15:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:15:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:15:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:15:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:15:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:15:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:15:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:15:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:15:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:15:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:15:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:15:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:15:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:15:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:15:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:15:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:15:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:15:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:15:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:15:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:15:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:09 IQ138000 NetworkManager[403]: <warn>  [1760199309.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:15:09 IQ138000 NetworkManager[403]: <info>  [1760199309.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:15:09 IQ138000 NetworkManager[403]: <warn>  [1760199309.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:15:09 IQ138000 NetworkManager[403]: <info>  [1760199309.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:15:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/422
Oct 11 16:15:09 IQ138000 NetworkManager[403]: <info>  [1760199309.0784] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:15:09 IQ138000 NetworkManager[403]: <info>  [1760199309.0786] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:15 IQ138000 NetworkManager[403]: <info>  [1760199315.4072] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:20 IQ138000 wb-watchdog[12887]: [INFO] Interval #599 started. Waiting up to 60 seconds for error...
Oct 11 16:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:15:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:15:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:15:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:15:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:15:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:15:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:15:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:15:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:15:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:15:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:15:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:15:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:15:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:15:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:15:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:15:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:15:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:15:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:15:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:15:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:15:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:15:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:15:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:15:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:15:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:15:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:15:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:15:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:15:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:15:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:15:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:15:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:15:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:15:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 NP energy L2, row count 7183, limit 7042
Oct 11 16:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13076 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:15:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:15:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:16:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:16:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:16:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:16:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:16:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:16:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:16:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:16:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:16:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:16:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:16:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:16:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:16:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:16:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:16:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:16:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:16:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:16:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:16:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:16:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:16:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:16:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:16:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:16:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:16:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:16:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:16:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:16:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:16:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:16:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:16:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:16:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:16:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:16:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:16:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:16:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6046] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6051] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6058] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6149] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6171] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6173] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6299] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6318] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6338] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6342] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6343] Config: added 'scan_ssid' value '1'
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6344] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6345] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.6346] Config: added 'psk' value '<hidden>'
Oct 11 16:16:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/423
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.7069] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:16:10 IQ138000 NetworkManager[403]: <info>  [1760199370.7072] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:16:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:16:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:16:20 IQ138000 wb-watchdog[13598]: [INFO] Interval #600 started. Waiting up to 60 seconds for error...
Oct 11 16:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:16:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:16:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:16:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:16:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:16:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:16:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:16:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:16:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:16:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:16:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:16:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:16:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:16:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:16:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:16:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:16:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:16:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:16:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:16:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:16:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:16:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:16:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:16:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:16:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:16:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:16:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:16:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:16:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:16:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:16:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:16:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:16:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:16:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:16:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:16:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:16:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:16:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:36 IQ138000 NetworkManager[403]: <warn>  [1760199396.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:16:36 IQ138000 NetworkManager[403]: <info>  [1760199396.0228] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:16:36 IQ138000 NetworkManager[403]: <warn>  [1760199396.0275] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:16:36 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:16:36 IQ138000 NetworkManager[403]: <info>  [1760199396.0356] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:16:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/423
Oct 11 16:16:36 IQ138000 NetworkManager[403]: <info>  [1760199396.0865] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:16:36 IQ138000 NetworkManager[403]: <info>  [1760199396.0867] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:42 IQ138000 NetworkManager[403]: <info>  [1760199402.3701] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 16:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:01 IQ138000 CRON[13966]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:17:01 IQ138000 CRON[13970]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 16:17:01 IQ138000 CRON[13966]: pam_unix(cron:session): session closed for user root
Oct 11 16:17:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:17:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:17:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:17:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:17:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:17:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:17:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:17:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:17:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:17:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:17:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:17:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:17:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:17:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:17:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:17:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:17:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:17:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:17:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:17:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:17:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:17:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:17:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:17:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:17:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:17:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:17:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:17:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:17:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:17:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:17:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:17:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:17:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:17:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:17:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:17:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:17:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:17:20 IQ138000 wb-watchdog[14230]: [INFO] Interval #601 started. Waiting up to 60 seconds for error...
Oct 11 16:17:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:17:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:17:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:17:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:17:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:17:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:17:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:17:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:17:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:17:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:17:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:17:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:17:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:17:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:17:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:17:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:17:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:17:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:17:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:17:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:17:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:17:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:17:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:17:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:17:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:17:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:17:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:17:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:17:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:17:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:17:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:17:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:17:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:17:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:17:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:17:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:17:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:17:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:17:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:17:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Irms L1, row count 7183, limit 7042
Oct 11 16:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0569] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0642] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0653] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0735] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0775] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0777] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0922] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0946] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0986] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0990] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0991] Config: added 'scan_ssid' value '1'
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0992] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0993] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.0994] Config: added 'psk' value '<hidden>'
Oct 11 16:17:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/424
Oct 11 16:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.1649] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:17:38 IQ138000 NetworkManager[403]: <info>  [1760199458.1651] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:17:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:17:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:17:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:18:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:18:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:18:03 IQ138000 NetworkManager[403]: <warn>  [1760199483.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:18:03 IQ138000 NetworkManager[403]: <info>  [1760199483.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:18:03 IQ138000 NetworkManager[403]: <warn>  [1760199483.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:18:03 IQ138000 NetworkManager[403]: <info>  [1760199483.0267] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:18:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/424
Oct 11 16:18:03 IQ138000 NetworkManager[403]: <info>  [1760199483.0694] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:18:03 IQ138000 NetworkManager[403]: <info>  [1760199483.0696] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:18:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:18:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:18:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:18:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:18:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:18:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:18:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:18:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:18:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:18:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:18:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:18:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:18:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:18:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:18:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:18:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:18:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:18:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:18:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:18:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:18:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:18:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:18:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:18:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:18:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:18:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:18:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:18:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:18:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:18:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:18:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:18:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:18:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:18:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:18:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:18:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:18:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:18:08 IQ138000 NetworkManager[403]: <info>  [1760199488.8493] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:18:15 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:18:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:18:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:18:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:18:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:18:20 IQ138000 wb-watchdog[14917]: [INFO] Interval #602 started. Waiting up to 60 seconds for error...
Oct 11 16:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:18:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:18:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:18:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:18:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:18:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:18:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:18:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:18:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:18:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:18:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:18:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:18:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:18:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:18:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:18:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:18:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:18:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:18:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:18:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:18:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:18:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:18:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:18:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:18:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:18:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:18:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:18:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:18:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:18:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:18:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:18:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:18:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:18:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:18:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:18:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:18:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:18:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:18:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 AP energy L3, row count 7183, limit 7042
Oct 11 16:18:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 P L2, row count 7183, limit 7042
Oct 11 16:18:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:18:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:19:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:19:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:19:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:19:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:19:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:19:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:19:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:19:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:19:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:19:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:19:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:19:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:19:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:19:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:19:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:19:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:19:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:19:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:19:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:19:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:19:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:19:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:19:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:19:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:19:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:19:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:19:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:19:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:19:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:19:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:19:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:19:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:19:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:19:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:19:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:19:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1752] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1769] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1776] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1835] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1858] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1861] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.1987] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2009] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2028] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2031] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2032] Config: added 'scan_ssid' value '1'
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2033] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2035] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2036] Config: added 'psk' value '<hidden>'
Oct 11 16:19:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/425
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2832] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:19:04 IQ138000 NetworkManager[403]: <info>  [1760199544.2834] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:19:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:19:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:20 IQ138000 wb-watchdog[15545]: [INFO] Interval #603 started. Waiting up to 60 seconds for error...
Oct 11 16:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:19:29 IQ138000 NetworkManager[403]: <warn>  [1760199569.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:19:29 IQ138000 NetworkManager[403]: <info>  [1760199569.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:19:29 IQ138000 NetworkManager[403]: <warn>  [1760199569.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:19:29 IQ138000 NetworkManager[403]: <info>  [1760199569.0270] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:19:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/425
Oct 11 16:19:29 IQ138000 NetworkManager[403]: <info>  [1760199569.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:19:29 IQ138000 NetworkManager[403]: <info>  [1760199569.0705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:19:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:19:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:19:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:19:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:19:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:19:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:19:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:19:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:19:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:19:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:19:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:19:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:19:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:19:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:19:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:19:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:19:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:19:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:19:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:19:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:19:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:19:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:19:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:19:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:19:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:19:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:19:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:19:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:19:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:19:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:19:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:19:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:19:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:19:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:19:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:19:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:19:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:19:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:19:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:34 IQ138000 NetworkManager[403]: <info>  [1760199574.9202] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:19:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:19:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:19:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:19:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:19:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:19:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:20:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:20:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:20:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:20:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:20:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:20:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:20:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:20:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:20:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:20:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:20:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:20:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:20:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:20:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:20:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:20:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:20:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:20:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:20:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:20:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:20:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:20:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:20:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:20:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:20:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:20:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:20:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:20:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:20:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:20:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:20:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:20:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:20:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:20:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:20:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:20:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:18 IQ138000 npm[3801]: [2025-10-11 16:20:18] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":48.37,"last_seen":1760199618179,"linkquality":40,"power_outage_count":35250,"temperature":24.21,"voltage":3075}'
Oct 11 16:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:20:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:20:20 IQ138000 wb-watchdog[16231]: [INFO] Interval #604 started. Waiting up to 60 seconds for error...
Oct 11 16:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1672] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1677] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1683] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1737] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1754] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1757] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1901] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1926] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1944] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1948] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1949] Config: added 'scan_ssid' value '1'
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1950] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1951] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.1952] Config: added 'psk' value '<hidden>'
Oct 11 16:20:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/426
Oct 11 16:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.2649] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:20:30 IQ138000 NetworkManager[403]: <info>  [1760199630.2650] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:20:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:20:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:20:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:20:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:20:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:20:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:20:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:20:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:20:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:20:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:20:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:20:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:20:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:20:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:20:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:20:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:20:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:20:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:20:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:20:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:20:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:20:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:20:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:20:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:20:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:20:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:20:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:20:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:20:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:20:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:20:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:20:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:20:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:20:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:20:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:20:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:55 IQ138000 NetworkManager[403]: <warn>  [1760199655.0224] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:20:55 IQ138000 NetworkManager[403]: <info>  [1760199655.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:20:55 IQ138000 NetworkManager[403]: <warn>  [1760199655.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:20:55 IQ138000 NetworkManager[403]: <info>  [1760199655.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:20:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/426
Oct 11 16:20:55 IQ138000 NetworkManager[403]: <info>  [1760199655.0764] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:20:55 IQ138000 NetworkManager[403]: <info>  [1760199655.0766] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:20:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:20:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:00 IQ138000 NetworkManager[403]: <info>  [1760199660.9383] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:21:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:21:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:21:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:21:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:21:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:21:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:21:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:21:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:21:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:21:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:21:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:21:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:21:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:21:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:21:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:21:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:21:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:21:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:21:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:21:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:21:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:21:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:21:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:21:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:21:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:21:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:21:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:21:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:21:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:21:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:21:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:21:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:21:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:21:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:21:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:21:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:21:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:21:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:21:20 IQ138000 wb-watchdog[16848]: [INFO] Interval #605 started. Waiting up to 60 seconds for error...
Oct 11 16:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:21:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:21:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:21:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:21:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:21:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:21:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:21:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:21:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:21:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:21:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:21:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:21:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:21:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:21:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:21:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:21:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:21:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:21:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:21:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:21:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:21:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:21:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:21:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:21:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:21:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:21:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:21:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:21:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:21:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:21:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:21:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:21:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:21:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:21:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:21:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:21:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:21:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:21:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:21:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:21:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:21:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:21:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.1958] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.1965] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.1973] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2051] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2083] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2086] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2237] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2312] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2331] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2335] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2336] Config: added 'scan_ssid' value '1'
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2337] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2338] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.2339] Config: added 'psk' value '<hidden>'
Oct 11 16:21:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/427
Oct 11 16:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.3211] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:21:56 IQ138000 NetworkManager[403]: <info>  [1760199716.3213] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:22:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:22:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:22:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:22:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:22:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:22:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:22:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:22:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:22:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:22:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:22:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:22:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:22:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:22:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:22:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:22:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:22:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:22:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:22:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:22:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:22:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:22:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:22:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:22:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:22:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:22:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:22:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:22:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:22:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:22:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:22:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:22:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:22:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:22:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:22:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:22:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:22:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:22:20 IQ138000 wb-watchdog[17557]: [INFO] Interval #606 started. Waiting up to 60 seconds for error...
Oct 11 16:22:21 IQ138000 NetworkManager[403]: <warn>  [1760199741.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:22:21 IQ138000 NetworkManager[403]: <info>  [1760199741.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:22:21 IQ138000 NetworkManager[403]: <warn>  [1760199741.0295] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:22:21 IQ138000 NetworkManager[403]: <info>  [1760199741.0311] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:22:21 IQ138000 NetworkManager[403]: <info>  [1760199741.0314] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:22:21 IQ138000 NetworkManager[403]: <info>  [1760199741.0334] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:22:21 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/427
Oct 11 16:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:22:22 IQ138000 npm[3801]: [2025-10-11 16:22:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.62,"last_seen":1760199742819,"linkquality":65,"power_outage_count":25795,"pressure":991.9,"temperature":22.84,"voltage":2995}'
Oct 11 16:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:22:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:22:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:26 IQ138000 NetworkManager[403]: <info>  [1760199746.9777] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:22:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:22:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:22:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:22:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:22:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:22:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:22:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:22:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:22:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:22:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:22:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:22:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:22:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:22:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:22:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:22:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:22:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:22:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:22:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:22:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:22:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:22:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:22:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:22:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:22:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:22:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:22:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:22:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:22:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:22:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:22:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:22:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:22:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:22:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:22:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:22:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:22:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:22:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:22:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:22:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:23:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:23:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:23:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:23:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:23:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:23:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:23:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:23:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:23:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:23:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:23:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:23:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:23:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:23:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:23:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:23:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:23:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:23:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:23:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:23:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:23:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:23:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:23:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:23:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:23:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:23:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:23:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:23:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:23:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:23:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:23:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:23:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:23:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:23:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:23:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:23:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:20 IQ138000 wb-watchdog[18156]: [INFO] Interval #607 started. Waiting up to 60 seconds for error...
Oct 11 16:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2407] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2442] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2453] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2515] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2542] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2544] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2637] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2658] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2675] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2678] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2680] Config: added 'scan_ssid' value '1'
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2681] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2682] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.2683] Config: added 'psk' value '<hidden>'
Oct 11 16:23:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/428
Oct 11 16:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.3572] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:23:22 IQ138000 NetworkManager[403]: <info>  [1760199802.3574] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:23:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:23:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:23:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:23:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:23:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:23:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:23:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:23:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:23:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:23:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:23:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:23:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:23:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:23:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:23:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:23:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:23:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:23:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:23:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:23:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:23:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:23:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:23:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:23:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:23:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:23:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:23:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:23:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:23:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:23:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:23:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:23:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:23:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:23:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:23:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:23:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:23:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:23:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:48 IQ138000 NetworkManager[403]: <warn>  [1760199828.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:23:48 IQ138000 NetworkManager[403]: <info>  [1760199828.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:23:48 IQ138000 NetworkManager[403]: <warn>  [1760199828.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:23:48 IQ138000 NetworkManager[403]: <info>  [1760199828.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:23:48 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:23:48 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/428
Oct 11 16:23:48 IQ138000 NetworkManager[403]: <info>  [1760199828.0629] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:23:48 IQ138000 NetworkManager[403]: <info>  [1760199828.0630] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:48 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:54 IQ138000 NetworkManager[403]: <info>  [1760199834.0567] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:23:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:23:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:23:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:24:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:24:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:24:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:24:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:24:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:24:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:24:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:24:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:24:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:24:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:24:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:24:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:24:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:24:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:24:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:24:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:24:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:24:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:24:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:24:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:24:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:24:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:24:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:24:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:24:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:24:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:24:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:24:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:24:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:24:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:24:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:24:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:24:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:24:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:24:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:24:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:24:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:20 IQ138000 wb-watchdog[18873]: [INFO] Interval #608 started. Waiting up to 60 seconds for error...
Oct 11 16:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:24:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:24:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:24:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:24:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:24:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:24:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:24:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:24:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:24:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:24:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:24:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:24:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:24:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:24:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:24:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:24:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:24:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:24:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:24:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:24:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:24:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:24:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:24:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:24:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:24:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:24:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:24:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:24:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:24:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:24:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:24:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:24:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:24:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:24:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:24:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:24:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:24:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:24:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:24:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:24:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2089] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2094] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2103] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2197] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2230] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2232] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2355] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2387] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2447] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2451] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2453] Config: added 'scan_ssid' value '1'
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2455] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2456] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:24:49 IQ138000 NetworkManager[403]: <info>  [1760199889.2457] Config: added 'psk' value '<hidden>'
Oct 11 16:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/429
Oct 11 16:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:52 IQ138000 NetworkManager[403]: <info>  [1760199892.3302] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:24:52 IQ138000 NetworkManager[403]: <info>  [1760199892.3304] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:24:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 S energy L3, row count 7183, limit 7042
Oct 11 16:24:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L1, row count 7183, limit 7042
Oct 11 16:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:01 IQ138000 CRON[19236]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:25:01 IQ138000 CRON[19240]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 16:25:01 IQ138000 CRON[19236]: pam_unix(cron:session): session closed for user root
Oct 11 16:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:25:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:25:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:25:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:25:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:25:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:25:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:25:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:25:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:25:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:25:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:25:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:25:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:25:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:25:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:25:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:25:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:25:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:25:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:25:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:25:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:25:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:25:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:25:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:25:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:25:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:25:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:25:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:25:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:25:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:25:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:25:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:25:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:25:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:25:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:25:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:25:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:14 IQ138000 NetworkManager[403]: <warn>  [1760199914.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:25:14 IQ138000 NetworkManager[403]: <info>  [1760199914.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:25:14 IQ138000 NetworkManager[403]: <warn>  [1760199914.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:25:14 IQ138000 NetworkManager[403]: <info>  [1760199914.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:25:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/429
Oct 11 16:25:14 IQ138000 NetworkManager[403]: <info>  [1760199914.0713] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:25:14 IQ138000 NetworkManager[403]: <info>  [1760199914.0715] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:19 IQ138000 NetworkManager[403]: <info>  [1760199919.9898] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:25:20 IQ138000 wb-watchdog[19488]: [INFO] Interval #609 started. Waiting up to 60 seconds for error...
Oct 11 16:25:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:25:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:25:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:25:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:25:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:25:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:25:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:25:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:25:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:25:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:25:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:25:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:25:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:25:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:25:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:25:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:25:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:25:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:25:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:25:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:25:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:25:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:25:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:25:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:25:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:25:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:25:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:25:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:25:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:25:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:25:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:25:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:25:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:25:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:25:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:25:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:25:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:25:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:25:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:26:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:26:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:26:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:26:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:26:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:26:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:26:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:26:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:26:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:26:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:26:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:26:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:26:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:26:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:26:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:26:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:26:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:26:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:26:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:26:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:26:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:26:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:26:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:26:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:26:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:26:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:26:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:26:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:26:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:26:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:26:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:26:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:26:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:26:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:26:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:26:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:26:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:11 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 16:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2544] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2549] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2555] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2631] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2674] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2676] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2771] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2808] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2825] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2829] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2830] Config: added 'scan_ssid' value '1'
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2831] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2833] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.2834] Config: added 'psk' value '<hidden>'
Oct 11 16:26:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/430
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.3561] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:26:15 IQ138000 NetworkManager[403]: <info>  [1760199975.3566] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:20 IQ138000 wb-watchdog[20189]: [INFO] Interval #610 started. Waiting up to 60 seconds for error...
Oct 11 16:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:26:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:26:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:26:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:26:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:26:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:26:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:26:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:26:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:26:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:26:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:26:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:26:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:26:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:26:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:26:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:26:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:26:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:26:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:26:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:26:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:26:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:26:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:26:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:26:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:26:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:26:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:26:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:26:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:26:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:26:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:26:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:26:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:26:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:26:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:26:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:26:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:26:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:26:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:26:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:41 IQ138000 NetworkManager[403]: <warn>  [1760200001.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:26:41 IQ138000 NetworkManager[403]: <info>  [1760200001.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:26:41 IQ138000 NetworkManager[403]: <warn>  [1760200001.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:26:41 IQ138000 NetworkManager[403]: <info>  [1760200001.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:26:41 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:26:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/430
Oct 11 16:26:41 IQ138000 NetworkManager[403]: <info>  [1760200001.0684] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:26:41 IQ138000 NetworkManager[403]: <info>  [1760200001.0688] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:26:41 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:26:46 IQ138000 NetworkManager[403]: <info>  [1760200006.9970] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:26:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:26:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:26:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:27:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:27:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:27:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:27:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:27:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:27:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:27:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:27:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:27:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:27:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:27:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:27:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:27:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:27:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:27:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:27:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:27:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:27:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:27:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:27:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:27:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:27:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:27:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:27:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:27:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:27:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:27:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:27:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:27:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:27:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:27:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:27:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:27:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:27:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:27:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:27:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:27:20 IQ138000 wb-watchdog[20816]: [INFO] Interval #611 started. Waiting up to 60 seconds for error...
Oct 11 16:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:27:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:27:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:27:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:27:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:27:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:27:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:27:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:27:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:27:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:27:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:27:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:27:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:27:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:27:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:27:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:27:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:27:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:27:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:27:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:27:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:27:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:27:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:27:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:27:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:27:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:27:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:27:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:27:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:27:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:27:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:27:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:27:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:27:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:27:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:27:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:27:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:27:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:27:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1598] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1604] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1611] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1691] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1730] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1744] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1860] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1885] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1922] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1925] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1926] Config: added 'scan_ssid' value '1'
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1927] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1928] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:27:42 IQ138000 NetworkManager[403]: <info>  [1760200062.1929] Config: added 'psk' value '<hidden>'
Oct 11 16:27:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/431
Oct 11 16:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:46 IQ138000 NetworkManager[403]: <info>  [1760200066.2686] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:27:46 IQ138000 NetworkManager[403]: <info>  [1760200066.2689] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:27:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:27:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:07 IQ138000 NetworkManager[403]: <warn>  [1760200087.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:28:07 IQ138000 NetworkManager[403]: <info>  [1760200087.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:28:07 IQ138000 NetworkManager[403]: <warn>  [1760200087.0261] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:28:07 IQ138000 NetworkManager[403]: <info>  [1760200087.0280] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:28:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/431
Oct 11 16:28:07 IQ138000 NetworkManager[403]: <info>  [1760200087.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:28:07 IQ138000 NetworkManager[403]: <info>  [1760200087.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:28:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:28:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:28:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:28:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:28:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:28:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:28:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:28:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:28:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:28:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:28:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:28:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:28:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:28:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:28:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:28:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:28:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:28:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:28:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:28:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:28:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:28:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:28:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:28:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:28:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:28:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:28:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:28:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:28:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:28:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:28:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:28:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:28:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:28:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:28:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:28:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:28:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:28:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:28:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 16:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:28:12 IQ138000 NetworkManager[403]: <info>  [1760200092.9099] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:28:19 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:20 IQ138000 wb-watchdog[21501]: [INFO] Interval #612 started. Waiting up to 60 seconds for error...
Oct 11 16:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:28:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:28:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:28:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:28:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:28:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:28:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:28:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:28:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:28:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:28:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:28:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:28:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:28:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:28:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:28:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:28:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:28:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:28:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:28:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:28:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:28:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:28:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:28:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:28:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:28:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:28:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:28:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:28:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:28:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:28:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:28:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:28:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:28:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:28:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:28:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:28:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:28:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:28:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:28:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:28:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:29:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:29:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:29:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:29:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:29:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:29:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:29:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:29:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:29:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:29:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:29:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:29:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:29:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:29:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:29:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:29:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:29:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:29:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:29:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:29:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:29:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:29:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:29:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:29:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:29:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:29:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:29:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:29:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:29:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:29:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:29:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:29:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:29:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:29:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:29:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:29:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:29:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:29:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:29:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.1933] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.1938] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.1944] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2069] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2106] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2108] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2246] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2276] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2317] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2322] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2323] Config: added 'scan_ssid' value '1'
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2324] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2325] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.2326] Config: added 'psk' value '<hidden>'
Oct 11 16:29:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/432
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.3013] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:29:08 IQ138000 NetworkManager[403]: <info>  [1760200148.3016] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:29:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:29:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:29:20 IQ138000 wb-watchdog[22118]: [INFO] Interval #613 started. Waiting up to 60 seconds for error...
Oct 11 16:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:33 IQ138000 NetworkManager[403]: <warn>  [1760200173.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:29:33 IQ138000 NetworkManager[403]: <info>  [1760200173.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:29:33 IQ138000 NetworkManager[403]: <warn>  [1760200173.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:29:33 IQ138000 NetworkManager[403]: <info>  [1760200173.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:29:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/432
Oct 11 16:29:33 IQ138000 NetworkManager[403]: <info>  [1760200173.0670] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:29:33 IQ138000 NetworkManager[403]: <info>  [1760200173.0672] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:29:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:29:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:29:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:29:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:29:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:29:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:29:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:29:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:29:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:29:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:29:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:29:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:29:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:29:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:29:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:29:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:29:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:29:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:29:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:29:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:29:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:29:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:29:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:29:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:29:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:29:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:29:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:29:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:29:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:29:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:29:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:29:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:29:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:29:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:29:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:29:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:38 IQ138000 NetworkManager[403]: <info>  [1760200178.9308] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:30:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:30:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:30:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:30:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:30:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:30:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:30:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:30:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:30:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:30:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:30:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:30:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:30:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:30:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:30:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:30:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:30:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:30:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:30:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:30:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:30:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:30:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:30:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:30:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:30:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:30:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:30:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:30:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:30:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:30:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:30:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:30:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:30:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:30:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:30:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:30:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:20 IQ138000 wb-watchdog[22820]: [INFO] Interval #614 started. Waiting up to 60 seconds for error...
Oct 11 16:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:30:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.1884] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.1888] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.1894] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.1950] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.1969] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.1971] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2060] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2081] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2097] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2102] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2104] Config: added 'scan_ssid' value '1'
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2105] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2106] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2108] Config: added 'psk' value '<hidden>'
Oct 11 16:30:34 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/433
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2932] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:30:34 IQ138000 NetworkManager[403]: <info>  [1760200234.2935] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:30:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:30:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:30:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:30:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:30:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:30:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:30:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:30:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:30:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:30:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:30:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:30:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:30:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:30:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:30:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:30:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:30:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:30:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:30:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:30:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:30:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:30:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:30:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:30:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:30:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:30:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:30:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:30:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:30:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:30:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:30:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:30:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:30:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:30:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:30:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:30:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:30:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:30:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:30:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:30:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:30:59 IQ138000 NetworkManager[403]: <warn>  [1760200259.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:30:59 IQ138000 NetworkManager[403]: <info>  [1760200259.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:30:59 IQ138000 NetworkManager[403]: <warn>  [1760200259.0256] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:30:59 IQ138000 NetworkManager[403]: <info>  [1760200259.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:30:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/433
Oct 11 16:30:59 IQ138000 NetworkManager[403]: <info>  [1760200259.0727] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:30:59 IQ138000 NetworkManager[403]: <info>  [1760200259.0735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:04 IQ138000 NetworkManager[403]: <info>  [1760200264.9461] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:31:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:31:08 IQ138000 npm[3801]: [2025-10-11 16:31:08] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.62,"last_seen":1760200268747,"linkquality":58,"power_outage_count":25795,"pressure":991.9,"temperature":22.78,"voltage":2995}'
Oct 11 16:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:08 IQ138000 npm[3801]: [2025-10-11 16:31:08] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.09,"last_seen":1760200268765,"linkquality":58,"power_outage_count":25795,"pressure":991.9,"temperature":22.78,"voltage":2995}'
Oct 11 16:31:08 IQ138000 npm[3801]: [2025-10-11 16:31:08] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.09,"last_seen":1760200268765,"linkquality":58,"power_outage_count":25795,"pressure":991.7,"temperature":22.78,"voltage":2995}'
Oct 11 16:31:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:31:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:31:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:31:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:31:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:31:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:31:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:31:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:31:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:31:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:31:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:31:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:31:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:31:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:31:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:31:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:31:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:31:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:31:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:31:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:31:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:31:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:31:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:31:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:31:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:31:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:31:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:31:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:31:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:31:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:31:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:31:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:31:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:31:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:31:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:31:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:31:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:31:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:31:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:20 IQ138000 wb-watchdog[23445]: [INFO] Interval #615 started. Waiting up to 60 seconds for error...
Oct 11 16:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:31:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:31:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 S energy L1, row count 7183, limit 7042
Oct 11 16:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:31:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:31:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:31:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:31:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:31:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:31:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:31:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:31:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:31:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:31:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:31:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:31:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:31:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:31:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:31:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:31:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:31:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:31:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:31:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:31:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:31:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:31:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:31:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:31:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:31:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:31:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:31:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:31:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:31:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:31:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:31:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:31:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:31:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:31:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:31:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:31:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:31:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:31:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:31:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0166] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0193] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0210] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0294] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0321] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0323] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0443] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0468] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0504] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0521] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0523] Config: added 'scan_ssid' value '1'
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0523] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0525] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.0525] Config: added 'psk' value '<hidden>'
Oct 11 16:32:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/434
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.1225] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:32:00 IQ138000 NetworkManager[403]: <info>  [1760200320.1227] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:32:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:32:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:32:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:32:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:32:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:32:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:32:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:32:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:32:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:32:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:32:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:32:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:32:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:32:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:32:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:32:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:32:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:32:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:32:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:32:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:32:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:32:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:32:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:32:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:32:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:32:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:32:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:32:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:32:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:32:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:32:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:32:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:32:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:32:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:32:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:32:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:20 IQ138000 wb-watchdog[24140]: [INFO] Interval #616 started. Waiting up to 60 seconds for error...
Oct 11 16:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:32:25 IQ138000 NetworkManager[403]: <warn>  [1760200345.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:32:25 IQ138000 NetworkManager[403]: <info>  [1760200345.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:32:25 IQ138000 NetworkManager[403]: <warn>  [1760200345.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:32:25 IQ138000 NetworkManager[403]: <info>  [1760200345.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:32:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/434
Oct 11 16:32:25 IQ138000 NetworkManager[403]: <info>  [1760200345.0653] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:32:25 IQ138000 NetworkManager[403]: <info>  [1760200345.0655] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:32:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:32:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:32:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:32:30 IQ138000 NetworkManager[403]: <info>  [1760200350.8105] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:32:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:32:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:32:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:32:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:32:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:32:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:32:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:32:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:32:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:32:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:32:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:32:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:32:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:32:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:32:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:32:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:32:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:32:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:32:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:32:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:32:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:32:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:32:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:32:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:32:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:32:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:32:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:32:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:32:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:32:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:32:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:32:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:32:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:32:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:32:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:32:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:32:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:32:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:33:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:33:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:33:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:33:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:33:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:33:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:33:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:33:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:33:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:33:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:33:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:33:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:33:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:33:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:33:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:33:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:33:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:33:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:33:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:33:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:33:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:33:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:33:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:33:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:33:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:33:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:33:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:33:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:33:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:33:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:33:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:33:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:33:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:33:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:33:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:33:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:33:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:33:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:33:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:33:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:33:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:33:20 IQ138000 wb-watchdog[24755]: [INFO] Interval #617 started. Waiting up to 60 seconds for error...
Oct 11 16:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9183] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9188] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9196] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9256] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9275] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9277] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9375] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9394] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9413] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9416] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9417] Config: added 'scan_ssid' value '1'
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9418] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9419] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:33:25 IQ138000 NetworkManager[403]: <info>  [1760200405.9420] Config: added 'psk' value '<hidden>'
Oct 11 16:33:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/435
Oct 11 16:33:26 IQ138000 NetworkManager[403]: <info>  [1760200406.0082] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:33:26 IQ138000 NetworkManager[403]: <info>  [1760200406.0085] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:33:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:33:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:33:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L3, row count 7183, limit 7042
Oct 11 16:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:33:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:33:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:33:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:33:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:33:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:33:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:33:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:33:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:33:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:33:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:33:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:33:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:33:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:33:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:33:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:33:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:33:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:33:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:33:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:33:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:33:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:33:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:33:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:33:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:33:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:33:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:33:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:33:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:33:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:33:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:33:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:33:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:33:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:33:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:33:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:33:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:33:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:33:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:33:51 IQ138000 NetworkManager[403]: <warn>  [1760200431.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:33:51 IQ138000 NetworkManager[403]: <info>  [1760200431.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:33:51 IQ138000 NetworkManager[403]: <warn>  [1760200431.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:33:51 IQ138000 NetworkManager[403]: <info>  [1760200431.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:33:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/435
Oct 11 16:33:51 IQ138000 NetworkManager[403]: <info>  [1760200431.0677] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:33:51 IQ138000 NetworkManager[403]: <info>  [1760200431.0679] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:33:56 IQ138000 NetworkManager[403]: <info>  [1760200436.6642] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:34:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:34:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:34:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:34:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:34:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:34:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:34:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:34:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:34:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:34:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:34:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:34:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:34:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:34:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:34:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:34:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:34:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:34:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:34:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:34:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:34:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:34:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:34:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:34:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:34:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:34:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:34:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:34:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:34:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:34:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:34:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:34:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:34:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:34:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:34:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:34:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:34:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:34:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:34:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:20 IQ138000 wb-watchdog[25460]: [INFO] Interval #618 started. Waiting up to 60 seconds for error...
Oct 11 16:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:34:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:34:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:34:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:34:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:34:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:34:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:34:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:34:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:34:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:34:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:34:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:34:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:34:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:34:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:34:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:34:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:34:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:34:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:34:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:34:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:34:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:34:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:34:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:34:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:34:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:34:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:34:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:34:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:34:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:34:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:34:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:34:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:34:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:34:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:34:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:34:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:34:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:34:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7636] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7640] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7646] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7717] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7744] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7746] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7860] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7895] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7917] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7923] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7924] Config: added 'scan_ssid' value '1'
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7925] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7926] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.7927] Config: added 'psk' value '<hidden>'
Oct 11 16:34:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/436
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.8664] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:34:51 IQ138000 NetworkManager[403]: <info>  [1760200491.8678] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Frequency, row count 7183, limit 7042
Oct 11 16:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 18 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:35:01 IQ138000 CRON[25827]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:35:01 IQ138000 CRON[25832]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 16:35:02 IQ138000 CRON[25827]: pam_unix(cron:session): session closed for user root
Oct 11 16:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:35:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:35:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:35:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:35:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:35:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:35:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:35:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:35:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:35:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:35:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:35:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:35:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:35:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:35:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:35:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:35:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:35:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:35:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:35:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:35:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:35:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:35:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:35:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:35:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:35:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:35:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:35:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:35:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:35:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:35:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:35:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:35:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:35:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:35:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:35:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:35:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:17 IQ138000 NetworkManager[403]: <warn>  [1760200517.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:35:17 IQ138000 NetworkManager[403]: <info>  [1760200517.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:35:17 IQ138000 NetworkManager[403]: <warn>  [1760200517.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:35:17 IQ138000 NetworkManager[403]: <info>  [1760200517.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:35:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/436
Oct 11 16:35:17 IQ138000 NetworkManager[403]: <info>  [1760200517.0680] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:35:17 IQ138000 NetworkManager[403]: <info>  [1760200517.0682] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:20 IQ138000 wb-watchdog[26072]: [INFO] Interval #619 started. Waiting up to 60 seconds for error...
Oct 11 16:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:35:23 IQ138000 NetworkManager[403]: <info>  [1760200523.5627] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:35:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:35:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:35:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:35:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:35:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:35:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:35:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:35:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:35:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:35:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:35:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:35:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:35:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:35:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:35:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:35:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:35:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:35:40 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:35:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:35:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:35:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:35:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:35:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:35:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:35:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:35:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:35:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:35:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:35:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:35:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:35:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:35:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:35:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:35:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:35:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:35:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:35:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:35:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:35:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:51 IQ138000 npm[3801]: [2025-10-11 16:35:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.09,"last_seen":1760200551924,"linkquality":69,"power_outage_count":25795,"pressure":991.7,"temperature":22.73,"voltage":2995}'
Oct 11 16:35:51 IQ138000 npm[3801]: [2025-10-11 16:35:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.9,"last_seen":1760200551933,"linkquality":69,"power_outage_count":25795,"pressure":991.7,"temperature":22.73,"voltage":2995}'
Oct 11 16:35:51 IQ138000 npm[3801]: [2025-10-11 16:35:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.9,"last_seen":1760200551952,"linkquality":69,"power_outage_count":25795,"pressure":991.9,"temperature":22.73,"voltage":2995}'
Oct 11 16:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:02 IQ138000 npm[3801]: [2025-10-11 16:36:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.9,"last_seen":1760200562372,"linkquality":47,"power_outage_count":25795,"pressure":991.9,"temperature":22.67,"voltage":2995}'
Oct 11 16:36:02 IQ138000 npm[3801]: [2025-10-11 16:36:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.04,"last_seen":1760200562385,"linkquality":43,"power_outage_count":25795,"pressure":991.9,"temperature":22.67,"voltage":2995}'
Oct 11 16:36:02 IQ138000 npm[3801]: [2025-10-11 16:36:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.04,"last_seen":1760200562402,"linkquality":40,"power_outage_count":25795,"pressure":991.7,"temperature":22.67,"voltage":2995}'
Oct 11 16:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:36:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:36:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:36:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:36:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:36:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:36:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:36:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:36:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:36:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:36:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:36:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:36:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:36:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:36:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:36:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:36:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:36:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:36:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:36:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:36:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:36:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:36:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:36:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:36:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:36:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:36:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:36:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:36:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:36:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:36:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:36:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:36:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:36:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:36:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:36:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:36:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:36:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:36:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:36:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:36:15 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 16:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6220] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6225] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6231] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6287] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6305] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6307] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6388] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6408] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6426] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6429] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6430] Config: added 'scan_ssid' value '1'
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6431] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6433] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.6434] Config: added 'psk' value '<hidden>'
Oct 11 16:36:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/437
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.7148] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:36:18 IQ138000 NetworkManager[403]: <info>  [1760200578.7150] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:36:20 IQ138000 wb-watchdog[26792]: [INFO] Interval #620 started. Waiting up to 60 seconds for error...
Oct 11 16:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:36:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:36:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:36:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:36:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:36:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:36:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:36:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:36:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:36:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:36:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:36:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:36:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:36:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:36:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:36:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:36:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:36:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:36:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:36:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:36:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:36:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:36:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:36:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:36:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:36:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:36:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:36:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:36:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:36:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:36:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:36:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:36:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:36:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:36:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:36:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:36:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:36:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:36:44 IQ138000 NetworkManager[403]: <warn>  [1760200604.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:36:44 IQ138000 NetworkManager[403]: <info>  [1760200604.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:36:44 IQ138000 NetworkManager[403]: <warn>  [1760200604.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:36:44 IQ138000 NetworkManager[403]: <info>  [1760200604.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:36:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:36:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/437
Oct 11 16:36:44 IQ138000 NetworkManager[403]: <info>  [1760200604.0713] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:36:44 IQ138000 NetworkManager[403]: <info>  [1760200604.0715] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:36:50 IQ138000 NetworkManager[403]: <info>  [1760200610.3579] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:36:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:36:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:36:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8764 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:37:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:37:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:37:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:37:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:37:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:37:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:37:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:37:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:37:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:37:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:37:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:37:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:37:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:37:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:37:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:37:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:37:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:37:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:37:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:37:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:37:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:37:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:37:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:37:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:37:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:37:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:37:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:37:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:37:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:37:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:37:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:37:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:37:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:37:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:37:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:37:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:37:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:37:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:37:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:37:20 IQ138000 wb-watchdog[27408]: [INFO] Interval #621 started. Waiting up to 60 seconds for error...
Oct 11 16:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 NP energy L2, row count 7183, limit 7042
Oct 11 16:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:37:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:37:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:37:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:37:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:37:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:37:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:37:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:37:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:37:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:37:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:37:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:37:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:37:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:37:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:37:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:37:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:37:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:37:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:37:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:37:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:37:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:37:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:37:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:37:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:37:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:37:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:37:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:37:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:37:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:37:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:37:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:37:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:37:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:37:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:37:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:37:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6412] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6417] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6423] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6497] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6517] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6519] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6617] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6641] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6716] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6741] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6762] Config: added 'scan_ssid' value '1'
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6776] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6790] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:37:45 IQ138000 NetworkManager[403]: <info>  [1760200665.6791] Config: added 'psk' value '<hidden>'
Oct 11 16:37:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/438
Oct 11 16:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:48 IQ138000 NetworkManager[403]: <info>  [1760200668.7558] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:37:48 IQ138000 NetworkManager[403]: <info>  [1760200668.7568] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:01 IQ138000 CRON[27853]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:38:01 IQ138000 CRON[27857]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 16:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:02 IQ138000 sSMTP[27868]: Unable to locate mail
Oct 11 16:38:02 IQ138000 sSMTP[27868]: Cannot open mail:25
Oct 11 16:38:02 IQ138000 cron[27868]: sendmail: Cannot open mail:25
Oct 11 16:38:02 IQ138000 CRON[27853]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 16:38:02 IQ138000 CRON[27853]: pam_unix(cron:session): session closed for user root
Oct 11 16:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:11 IQ138000 NetworkManager[403]: <warn>  [1760200691.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:38:11 IQ138000 NetworkManager[403]: <info>  [1760200691.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:38:11 IQ138000 NetworkManager[403]: <warn>  [1760200691.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:38:11 IQ138000 NetworkManager[403]: <info>  [1760200691.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:38:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/438
Oct 11 16:38:11 IQ138000 NetworkManager[403]: <info>  [1760200691.0773] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:38:11 IQ138000 NetworkManager[403]: <info>  [1760200691.0774] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:38:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:38:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:38:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:38:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:38:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:38:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:38:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:38:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:38:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:38:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:38:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:38:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:38:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:38:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:38:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:38:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:38:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:38:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:38:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:38:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:38:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:38:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:38:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:38:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:38:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:38:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:38:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:38:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:38:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:38:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:38:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:38:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:38:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:38:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:38:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:38:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:38:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:38:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:38:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:17 IQ138000 NetworkManager[403]: <info>  [1760200697.6453] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:20 IQ138000 wb-watchdog[28102]: [INFO] Interval #622 started. Waiting up to 60 seconds for error...
Oct 11 16:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:38:23 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:38:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:38:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:38:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:38:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:38:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:38:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:38:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:38:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:38:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:38:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:38:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:38:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:38:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:38:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:38:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:38:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:38:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:38:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:38:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:38:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:38:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:38:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:38:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:38:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:38:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:38:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:38:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:38:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:38:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:38:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:38:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:38:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:38:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:38:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:38:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:38:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:39:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:39:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:39:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:39:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:39:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:39:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:39:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:39:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:39:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:39:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:39:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:39:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:39:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:39:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:39:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:39:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:39:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:39:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:39:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:39:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:39:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:39:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:39:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:39:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:39:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:39:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:39:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:39:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:39:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:39:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:39:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:39:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:39:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:39:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:39:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:39:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9182] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9187] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9194] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9302] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9320] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9322] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9409] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9430] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9448] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9452] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9453] Config: added 'scan_ssid' value '1'
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9454] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9455] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:39:12 IQ138000 NetworkManager[403]: <info>  [1760200752.9457] Config: added 'psk' value '<hidden>'
Oct 11 16:39:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/439
Oct 11 16:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 NetworkManager[403]: <info>  [1760200753.0150] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:39:13 IQ138000 NetworkManager[403]: <info>  [1760200753.0152] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:20 IQ138000 wb-watchdog[28729]: [INFO] Interval #623 started. Waiting up to 60 seconds for error...
Oct 11 16:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:39:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:39:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:39:38 IQ138000 NetworkManager[403]: <warn>  [1760200778.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:39:38 IQ138000 NetworkManager[403]: <info>  [1760200778.0225] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:39:38 IQ138000 NetworkManager[403]: <warn>  [1760200778.0255] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:39:38 IQ138000 NetworkManager[403]: <info>  [1760200778.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:39:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/439
Oct 11 16:39:38 IQ138000 NetworkManager[403]: <info>  [1760200778.0678] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:39:38 IQ138000 NetworkManager[403]: <info>  [1760200778.0680] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:39:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:39:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:39:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:39:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:39:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:39:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:39:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:39:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:39:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:39:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:39:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:39:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:39:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:39:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:39:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:39:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:39:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:39:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:39:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:39:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:39:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:39:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:39:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:39:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:39:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:39:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:39:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:39:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:39:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:39:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:39:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:39:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:39:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:39:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:39:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:39:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:43 IQ138000 NetworkManager[403]: <info>  [1760200783.6795] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:39:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:40:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:40:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:40:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:40:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:40:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:40:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:40:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:40:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:40:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:40:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:40:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:40:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:40:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:40:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:40:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:40:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:40:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:40:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:40:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:40:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:40:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:40:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:40:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:40:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:40:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:40:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:40:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:40:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:40:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:40:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:40:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:40:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:40:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:40:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:40:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:40:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:40:20 IQ138000 wb-watchdog[29419]: [INFO] Interval #624 started. Waiting up to 60 seconds for error...
Oct 11 16:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:40:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:40:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8337] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8359] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8366] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8434] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8465] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8466] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8555] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8582] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8603] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8607] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8609] Config: added 'scan_ssid' value '1'
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8610] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8611] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.8612] Config: added 'psk' value '<hidden>'
Oct 11 16:40:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/440
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.9303] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:40:38 IQ138000 NetworkManager[403]: <info>  [1760200838.9306] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:40:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:40:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:40:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:40:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:40:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:40:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:40:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:40:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:40:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:40:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:40:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:40:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:40:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:40:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:40:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:40:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:40:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:40:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:40:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:40:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:40:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:40:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:40:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:40:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:40:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:40:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:40:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:40:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:40:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:40:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:40:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:40:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:40:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:40:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:40:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:40:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:40:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:40:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:40:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:04 IQ138000 NetworkManager[403]: <warn>  [1760200864.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:41:04 IQ138000 NetworkManager[403]: <info>  [1760200864.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:41:04 IQ138000 NetworkManager[403]: <warn>  [1760200864.0238] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:41:04 IQ138000 NetworkManager[403]: <info>  [1760200864.0285] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:41:04 IQ138000 NetworkManager[403]: <info>  [1760200864.0287] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:41:04 IQ138000 NetworkManager[403]: <info>  [1760200864.0388] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:41:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/440
Oct 11 16:41:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:41:10 IQ138000 NetworkManager[403]: <info>  [1760200870.5722] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:41:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:41:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:41:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:41:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:41:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:41:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:41:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:41:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:41:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:41:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:41:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:41:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:41:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:41:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:41:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:41:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:41:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:41:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:41:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:41:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:41:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:41:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:41:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:41:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:41:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:41:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:41:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:41:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:41:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:41:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:41:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:41:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:41:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:41:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:41:20 IQ138000 wb-watchdog[30037]: [INFO] Interval #625 started. Waiting up to 60 seconds for error...
Oct 11 16:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:41:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:41:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is disconnected
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 16:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:41:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:41:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5888 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:41:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:41:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:41:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:41:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:41:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:41:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:41:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:41:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:41:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:41:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:41:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:41:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:41:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:41:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:41:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:41:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:41:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:41:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:41:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:41:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:41:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:41:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:41:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:41:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:41:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:41:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 13314 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:41:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:41:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:41:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:41:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:41:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:41:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:41:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:41:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:41:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:41:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:41:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:41:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:42:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:42:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6540] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6545] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6551] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6674] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6693] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6708] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6853] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6884] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6909] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6912] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6914] Config: added 'scan_ssid' value '1'
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6915] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6916] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.6917] Config: added 'psk' value '<hidden>'
Oct 11 16:42:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/441
Oct 11 16:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.7579] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:42:05 IQ138000 NetworkManager[403]: <info>  [1760200925.7583] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 16:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:42:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:42:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:42:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:42:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:42:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:42:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:42:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:42:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:42:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:42:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:42:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:42:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:42:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:42:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:42:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:42:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:42:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:42:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:42:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:42:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:42:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:42:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:42:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:42:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:42:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:42:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:42:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:42:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:42:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:42:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:42:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:42:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:42:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:42:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:42:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:42:20 IQ138000 wb-watchdog[30749]: [INFO] Interval #626 started. Waiting up to 60 seconds for error...
Oct 11 16:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:42:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:42:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:42:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:31 IQ138000 NetworkManager[403]: <warn>  [1760200951.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:42:31 IQ138000 NetworkManager[403]: <info>  [1760200951.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:42:31 IQ138000 NetworkManager[403]: <warn>  [1760200951.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:42:31 IQ138000 NetworkManager[403]: <info>  [1760200951.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:42:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/441
Oct 11 16:42:31 IQ138000 NetworkManager[403]: <info>  [1760200951.0650] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:42:31 IQ138000 NetworkManager[403]: <info>  [1760200951.0653] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:42:37 IQ138000 NetworkManager[403]: <info>  [1760200957.3950] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:42:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:42:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:42:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:42:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:42:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:42:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:42:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:42:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:42:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:42:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:42:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:42:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:42:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:42:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:42:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:42:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:42:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:42:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:42:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:42:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:42:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:42:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:42:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:42:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:42:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:42:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:42:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:42:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:42:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:42:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:42:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:42:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:42:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:42:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:42:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:42:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:42:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:42:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:43:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:43:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:43:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:43:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:43:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:43:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:43:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:43:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:43:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:43:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:43:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:43:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:43:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:43:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:43:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:43:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:43:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:43:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:43:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:43:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:43:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:43:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:43:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:43:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:43:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:43:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:43:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:43:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:43:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:43:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:43:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:43:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:43:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:43:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:43:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:43:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:43:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:43:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:43:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:43:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:43:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:43:20 IQ138000 wb-watchdog[31355]: [INFO] Interval #627 started. Waiting up to 60 seconds for error...
Oct 11 16:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4427] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4432] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4446] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4504] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4523] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4525] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4638] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4667] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4690] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4694] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4701] Config: added 'scan_ssid' value '1'
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4703] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4704] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.4705] Config: added 'psk' value '<hidden>'
Oct 11 16:43:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:43:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/442
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.5509] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:43:32 IQ138000 NetworkManager[403]: <info>  [1760201012.5511] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:43:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:43:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:43:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:43:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:43:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:43:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:43:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:43:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:43:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:43:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:43:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:43:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:43:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:43:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:43:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:43:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:43:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:43:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:43:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:43:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:43:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:43:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:43:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:43:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:43:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:43:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:43:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:43:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:43:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:43:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:43:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:43:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:43:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:43:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:43:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:43:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:43:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:43:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:43:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:43:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:43:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:43:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:43:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:43:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:43:58 IQ138000 NetworkManager[403]: <warn>  [1760201038.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:43:58 IQ138000 NetworkManager[403]: <info>  [1760201038.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:43:58 IQ138000 NetworkManager[403]: <warn>  [1760201038.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:43:58 IQ138000 NetworkManager[403]: <info>  [1760201038.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:43:58 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:43:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/442
Oct 11 16:43:58 IQ138000 NetworkManager[403]: <info>  [1760201038.0722] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:43:58 IQ138000 NetworkManager[403]: <info>  [1760201038.0724] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:58 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:44:04 IQ138000 NetworkManager[403]: <info>  [1760201044.2521] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:44:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:44:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:44:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:44:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:44:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:44:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:44:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:44:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:44:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:44:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:44:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:44:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:44:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:44:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:44:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:44:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:44:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:44:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:44:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:44:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:44:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:44:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:44:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:44:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:44:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:44:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:44:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:44:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:44:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:44:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:44:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:44:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:44:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:44:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:44:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:44:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:44:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:44:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:44:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:44:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:44:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:20 IQ138000 wb-watchdog[32054]: [INFO] Interval #628 started. Waiting up to 60 seconds for error...
Oct 11 16:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:44:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:44:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:44:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:44:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:44:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:44:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:44:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:44:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:44:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:44:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:44:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:44:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:44:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:44:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:44:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:44:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:44:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:44:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:44:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:44:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:44:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:44:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:44:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:44:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:44:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:44:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:44:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:44:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:44:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:44:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:44:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:44:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:44:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:44:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:44:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:44:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:44:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:44:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:44:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:44:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 9220 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:44:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:44:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:44:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L2, row count 7183, limit 7042
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3118] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3123] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3129] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3180] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3200] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3202] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3286] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3315] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3344] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3347] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3348] Config: added 'scan_ssid' value '1'
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3349] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3351] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:44:59 IQ138000 NetworkManager[403]: <info>  [1760201099.3351] Config: added 'psk' value '<hidden>'
Oct 11 16:44:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/443
Oct 11 16:45:01 IQ138000 CRON[32418]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:45:01 IQ138000 CRON[32422]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 16:45:01 IQ138000 CRON[32418]: pam_unix(cron:session): session closed for user root
Oct 11 16:45:03 IQ138000 NetworkManager[403]: <info>  [1760201103.4221] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:45:03 IQ138000 NetworkManager[403]: <info>  [1760201103.4223] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:45:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:45:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:45:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:45:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:45:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:45:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:45:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:45:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:45:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:45:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:45:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:45:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:45:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:45:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:45:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:45:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:45:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:45:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:45:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:45:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:45:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:45:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:45:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:45:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:45:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:45:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:45:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:45:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:45:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:45:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:45:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:45:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:45:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:45:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:45:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:45:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:45:20 IQ138000 wb-watchdog[32675]: [INFO] Interval #629 started. Waiting up to 60 seconds for error...
Oct 11 16:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:45:25 IQ138000 NetworkManager[403]: <warn>  [1760201125.0225] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:45:25 IQ138000 NetworkManager[403]: <info>  [1760201125.0227] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:45:25 IQ138000 NetworkManager[403]: <warn>  [1760201125.0284] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:45:25 IQ138000 NetworkManager[403]: <info>  [1760201125.0305] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:45:25 IQ138000 NetworkManager[403]: <info>  [1760201125.0308] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:45:25 IQ138000 NetworkManager[403]: <info>  [1760201125.0328] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:45:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/443
Oct 11 16:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:31 IQ138000 NetworkManager[403]: <info>  [1760201131.0516] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:45:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:45:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:45:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:45:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:45:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:45:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:45:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:45:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:45:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:45:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:45:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:45:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:45:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:45:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:45:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:45:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:45:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:45:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:45:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:45:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:45:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:45:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:45:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:45:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:45:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:45:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:45:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:45:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:45:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:45:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:45:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:45:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:45:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:45:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:45:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:45:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:45:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:45:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:46:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:46:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:46:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:46:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:46:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:46:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:46:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:46:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:46:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:46:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:46:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:46:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:46:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:46:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:46:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:46:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:46:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:46:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:46:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:46:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:46:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:46:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:46:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:46:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:46:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:46:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:46:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:46:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:46:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:46:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:46:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:46:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:46:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:46:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:46:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:46:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:46:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:46:20 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 16:46:20 IQ138000 wb-watchdog[931]: [INFO] Interval #630 started. Waiting up to 60 seconds for error...
Oct 11 16:46:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:46:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:46:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.1824] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.1829] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.1836] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.1896] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.1916] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.1918] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2044] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2077] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2095] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2099] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2101] Config: added 'scan_ssid' value '1'
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2102] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2103] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2104] Config: added 'psk' value '<hidden>'
Oct 11 16:46:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/444
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2855] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:46:26 IQ138000 NetworkManager[403]: <info>  [1760201186.2857] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:46:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:46:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:46:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:46:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:46:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:46:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:46:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:46:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:46:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:46:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:46:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:46:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:46:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:46:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:46:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:46:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:46:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:46:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:46:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:46:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:46:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:46:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:46:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:46:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:46:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:46:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:46:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:46:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:46:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:46:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:46:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:46:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:46:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:46:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:46:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:46:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:51 IQ138000 NetworkManager[403]: <warn>  [1760201211.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:46:51 IQ138000 NetworkManager[403]: <info>  [1760201211.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:46:51 IQ138000 NetworkManager[403]: <warn>  [1760201211.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:46:51 IQ138000 NetworkManager[403]: <info>  [1760201211.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:46:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/444
Oct 11 16:46:51 IQ138000 NetworkManager[403]: <info>  [1760201211.0728] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:46:51 IQ138000 NetworkManager[403]: <info>  [1760201211.0741] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:46:56 IQ138000 NetworkManager[403]: <info>  [1760201216.9307] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:47:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:47:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:47:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:47:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:47:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:47:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:47:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:47:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:47:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:47:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:47:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:47:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:47:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:47:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:47:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:47:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:47:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:47:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:47:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:47:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:47:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:47:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:47:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:47:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:47:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:47:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:47:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:47:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:47:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:47:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:47:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:47:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:47:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:47:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:47:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:47:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:47:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:47:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:47:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:47:20 IQ138000 wb-watchdog[1554]: [INFO] Interval #631 started. Waiting up to 60 seconds for error...
Oct 11 16:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:47:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:47:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:47:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:47:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:47:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:47:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:47:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:47:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:47:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:47:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:47:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:47:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:47:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:47:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:47:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:47:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:47:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:47:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:47:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:47:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:47:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:47:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:47:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:47:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:47:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:47:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:47:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:47:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:47:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:47:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:47:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:47:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:47:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:47:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:47:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:47:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:47:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:47:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:47:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:47:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:47:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:47:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1199] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1221] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1229] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1288] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1305] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1307] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1396] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1419] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1441] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1445] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1446] Config: added 'scan_ssid' value '1'
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1447] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1449] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.1449] Config: added 'psk' value '<hidden>'
Oct 11 16:47:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/445
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.2150] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:47:52 IQ138000 NetworkManager[403]: <info>  [1760201272.2152] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:48:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:48:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:48:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:48:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:48:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:48:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:48:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:48:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:48:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:48:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:48:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:48:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:48:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:48:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:48:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:48:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:48:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:48:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:48:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:48:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:48:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:48:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:48:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:48:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:48:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:48:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:48:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:48:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:48:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:48:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:48:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:48:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:48:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:48:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:48:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:48:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:48:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:48:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:48:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:48:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:17 IQ138000 NetworkManager[403]: <warn>  [1760201297.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:48:17 IQ138000 NetworkManager[403]: <info>  [1760201297.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:48:17 IQ138000 NetworkManager[403]: <warn>  [1760201297.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:48:17 IQ138000 NetworkManager[403]: <info>  [1760201297.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:48:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/445
Oct 11 16:48:17 IQ138000 NetworkManager[403]: <info>  [1760201297.0662] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:48:17 IQ138000 NetworkManager[403]: <info>  [1760201297.0665] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:20 IQ138000 wb-watchdog[2308]: [INFO] Interval #632 started. Waiting up to 60 seconds for error...
Oct 11 16:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:22 IQ138000 NetworkManager[403]: <info>  [1760201302.8401] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:48:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:48:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:29 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:48:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:48:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:48:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:48:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:48:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:48:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:48:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:48:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:48:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:48:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:48:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:48:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:48:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:48:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:48:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:48:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:48:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:48:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:48:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:48:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:48:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:48:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:48:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:48:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:48:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:48:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:48:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:48:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:48:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:48:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:48:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:48:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:48:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:48:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:48:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:48:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:48:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:48:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 AP energy L2, row count 7183, limit 7042
Oct 11 16:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:48:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:48:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:49:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:49:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:49:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:49:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:49:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:49:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:49:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:49:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:49:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:49:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:49:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:49:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:49:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:49:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:49:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:49:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:49:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:49:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:49:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:49:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:49:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:49:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:49:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:49:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:49:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:49:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:49:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:49:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:49:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:49:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:49:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:49:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:49:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:49:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:49:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1031] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1039] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1049] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1204] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1224] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1226] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1363] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1419] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1438] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1442] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1443] Config: added 'scan_ssid' value '1'
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1444] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1445] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.1446] Config: added 'psk' value '<hidden>'
Oct 11 16:49:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/446
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.2143] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:49:18 IQ138000 NetworkManager[403]: <info>  [1760201358.2145] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:20 IQ138000 wb-watchdog[2951]: [INFO] Interval #633 started. Waiting up to 60 seconds for error...
Oct 11 16:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:49:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:49:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:49:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:49:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Irms L1, row count 7183, limit 7042
Oct 11 16:49:43 IQ138000 NetworkManager[403]: <warn>  [1760201383.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:49:43 IQ138000 NetworkManager[403]: <info>  [1760201383.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:49:43 IQ138000 NetworkManager[403]: <warn>  [1760201383.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:49:43 IQ138000 NetworkManager[403]: <info>  [1760201383.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:49:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/446
Oct 11 16:49:43 IQ138000 NetworkManager[403]: <info>  [1760201383.0690] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:49:43 IQ138000 NetworkManager[403]: <info>  [1760201383.0692] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:49:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:49:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:49:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:49:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:49:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:49:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:49:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:49:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:49:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:49:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:49:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:49:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:49:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:49:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:49:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:49:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:49:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:49:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:49:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:49:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:49:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:49:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:49:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:49:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:49:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:49:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:49:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:49:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:49:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:49:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:49:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:49:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:49:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:49:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:49:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:49:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:48 IQ138000 NetworkManager[403]: <info>  [1760201388.8428] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:50:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16634 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:50:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:50:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:50:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:50:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:50:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:50:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:50:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:50:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:50:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:50:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:50:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:50:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:50:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:50:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:50:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:50:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:50:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:50:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:50:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:50:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:50:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:50:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:50:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:50:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:50:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:50:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:50:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:50:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:50:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:50:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:50:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:50:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:50:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:50:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:50:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:50:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:50:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:50:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:50:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:50:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:50:20 IQ138000 wb-watchdog[3667]: [INFO] Interval #634 started. Waiting up to 60 seconds for error...
Oct 11 16:50:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:50:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:50:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8736] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8742] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8748] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8845] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8864] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8866] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8962] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8980] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.8996] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9001] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9002] Config: added 'scan_ssid' value '1'
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9003] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9004] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9005] Config: added 'psk' value '<hidden>'
Oct 11 16:50:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/447
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9719] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:50:43 IQ138000 NetworkManager[403]: <info>  [1760201443.9721] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:50:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:50:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:50:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:50:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:50:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:50:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:50:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:50:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:50:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:50:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:50:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:50:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:50:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:50:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:50:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:50:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:50:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:50:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:50:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:50:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:50:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:50:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:50:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:50:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:50:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:50:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:50:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:50:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:50:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:50:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:50:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:50:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:50:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:50:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:50:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:50:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:50:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:50:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:50:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:51:09 IQ138000 NetworkManager[403]: <warn>  [1760201469.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:51:09 IQ138000 NetworkManager[403]: <info>  [1760201469.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:51:09 IQ138000 NetworkManager[403]: <warn>  [1760201469.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:51:09 IQ138000 NetworkManager[403]: <info>  [1760201469.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:51:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/447
Oct 11 16:51:09 IQ138000 NetworkManager[403]: <info>  [1760201469.0749] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:51:09 IQ138000 NetworkManager[403]: <info>  [1760201469.0751] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:51:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:51:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:51:14 IQ138000 NetworkManager[403]: <info>  [1760201474.6809] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:51:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:51:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:51:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:51:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:51:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:51:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:51:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:51:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:51:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:51:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:51:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:51:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:51:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:51:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:51:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:51:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:51:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:51:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:51:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:51:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:51:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:51:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:51:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:51:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:51:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:51:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:51:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:51:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:51:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:51:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:51:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:51:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:51:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:51:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:51:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:51:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:20 IQ138000 wb-watchdog[4301]: [INFO] Interval #635 started. Waiting up to 60 seconds for error...
Oct 11 16:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:51:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:51:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:51:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:51:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:51:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:51:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:51:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:51:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:51:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:51:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:51:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:51:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:51:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:51:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:51:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:51:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:51:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:51:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:51:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:51:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:51:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:51:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:51:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:51:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:51:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:51:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:51:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:51:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:51:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:51:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 16:51:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:51:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:51:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:51:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:51:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:51:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:51:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:51:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:51:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:51:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:51:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:51:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:51:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:52:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:52:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8732] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8736] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8742] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8839] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8872] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8874] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8977] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.8996] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9026] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9030] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9031] Config: added 'scan_ssid' value '1'
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9031] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9033] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9033] Config: added 'psk' value '<hidden>'
Oct 11 16:52:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/448
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9700] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:52:09 IQ138000 NetworkManager[403]: <info>  [1760201529.9701] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:52:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:52:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:52:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:52:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:52:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:52:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:52:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:52:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:52:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:52:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:52:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:52:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:52:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:52:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:52:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:52:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:52:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:52:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:52:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:52:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:52:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:52:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:52:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:52:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:52:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:52:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:52:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:52:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:52:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:52:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:52:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:52:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:52:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:52:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:52:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:52:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:52:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:52:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:52:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:52:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:52:20 IQ138000 wb-watchdog[5029]: [INFO] Interval #636 started. Waiting up to 60 seconds for error...
Oct 11 16:52:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:35 IQ138000 NetworkManager[403]: <warn>  [1760201555.0226] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:52:35 IQ138000 NetworkManager[403]: <info>  [1760201555.0228] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:52:35 IQ138000 NetworkManager[403]: <warn>  [1760201555.0258] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:52:35 IQ138000 NetworkManager[403]: <info>  [1760201555.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:52:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/448
Oct 11 16:52:35 IQ138000 NetworkManager[403]: <info>  [1760201555.0703] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:52:35 IQ138000 NetworkManager[403]: <info>  [1760201555.0706] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:40 IQ138000 NetworkManager[403]: <info>  [1760201560.6486] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:52:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:52:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:52:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:52:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:52:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:52:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:52:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:52:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:52:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:52:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:52:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:52:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:52:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:52:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:52:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:52:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:52:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:52:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:52:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:52:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:52:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:52:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:52:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:52:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:52:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:52:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:52:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:52:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:52:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:52:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:52:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:52:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:52:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:52:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:52:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:52:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:52:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:52:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:52:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:52:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:52:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:53:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:53:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:53:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:53:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:53:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:53:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:53:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:53:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:53:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:53:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:53:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:53:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:53:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:53:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:53:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:53:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:53:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:53:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:53:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:53:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:53:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:53:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:53:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:53:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:53:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:53:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:53:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:53:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:53:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:53:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:53:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:53:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:53:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:53:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:53:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:53:20 IQ138000 wb-watchdog[5654]: [INFO] Interval #637 started. Waiting up to 60 seconds for error...
Oct 11 16:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:53:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:53:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:53:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7161] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7188] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7196] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7261] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7286] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7288] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7387] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7410] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7434] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7437] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7438] Config: added 'scan_ssid' value '1'
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7439] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7441] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.7441] Config: added 'psk' value '<hidden>'
Oct 11 16:53:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/449
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.8133] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:53:35 IQ138000 NetworkManager[403]: <info>  [1760201615.8135] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:53:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:53:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:53:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:53:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:53:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:53:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:53:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:53:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:53:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:53:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:53:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:53:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:53:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:53:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:53:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:53:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:53:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:53:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:53:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:53:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:53:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:53:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:53:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:53:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:53:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:53:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:53:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:53:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:53:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:53:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:53:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:53:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:53:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:53:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:53:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:53:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:54:01 IQ138000 NetworkManager[403]: <warn>  [1760201641.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:54:01 IQ138000 NetworkManager[403]: <info>  [1760201641.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:54:01 IQ138000 NetworkManager[403]: <warn>  [1760201641.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:54:01 IQ138000 NetworkManager[403]: <info>  [1760201641.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:54:01 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/449
Oct 11 16:54:01 IQ138000 NetworkManager[403]: <info>  [1760201641.0660] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:54:01 IQ138000 NetworkManager[403]: <info>  [1760201641.0662] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:54:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:54:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:54:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:54:07 IQ138000 NetworkManager[403]: <info>  [1760201647.4517] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:54:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:54:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:54:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:54:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:54:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:54:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:54:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:54:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:54:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:54:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:54:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:54:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:54:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:54:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:54:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:54:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:54:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:54:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:54:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:54:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:54:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:54:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:54:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:54:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:54:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:54:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:54:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:54:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:54:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:54:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:54:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:54:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:54:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:54:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:54:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:54:20 IQ138000 wb-watchdog[6381]: [INFO] Interval #638 started. Waiting up to 60 seconds for error...
Oct 11 16:54:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:54:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:54:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:54:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:54:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:54:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:54:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:54:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:54:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:54:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:54:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:54:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:54:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:54:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:54:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:54:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:54:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:54:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:54:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:54:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:54:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:54:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:54:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:54:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:54:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:54:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:54:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:54:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:54:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:54:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:54:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:54:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:54:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:54:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:54:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:54:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:54:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:54:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L3, row count 7183, limit 7042
Oct 11 16:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:55:01 IQ138000 CRON[6746]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 16:55:01 IQ138000 CRON[6750]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 16:55:01 IQ138000 CRON[6746]: pam_unix(cron:session): session closed for user root
Oct 11 16:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6281] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6286] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6310] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6459] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6510] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6512] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6620] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6665] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6689] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6693] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6694] Config: added 'scan_ssid' value '1'
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6706] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6708] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.6709] Config: added 'psk' value '<hidden>'
Oct 11 16:55:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/450
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.7395] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:55:02 IQ138000 NetworkManager[403]: <info>  [1760201702.7397] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:55:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:55:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:55:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:55:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:55:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:55:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:55:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:55:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:55:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:55:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:55:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:55:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:55:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:55:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:55:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:55:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:55:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:55:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:55:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:55:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:55:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:55:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:55:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:55:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:55:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:55:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:55:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:55:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:55:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:55:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:55:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:55:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:55:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:55:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:55:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:55:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:55:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:55:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:55:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:20 IQ138000 wb-watchdog[6990]: [INFO] Interval #639 started. Waiting up to 60 seconds for error...
Oct 11 16:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:55:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:55:28 IQ138000 NetworkManager[403]: <warn>  [1760201728.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:55:28 IQ138000 NetworkManager[403]: <info>  [1760201728.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:55:28 IQ138000 NetworkManager[403]: <warn>  [1760201728.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:55:28 IQ138000 NetworkManager[403]: <info>  [1760201728.0257] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:55:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/450
Oct 11 16:55:28 IQ138000 NetworkManager[403]: <info>  [1760201728.0693] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:55:28 IQ138000 NetworkManager[403]: <info>  [1760201728.0697] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:55:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:55:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:55:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:55:34 IQ138000 NetworkManager[403]: <info>  [1760201734.3856] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:55:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:55:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:55:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:55:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:55:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:55:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:55:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:55:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:55:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:55:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:55:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:55:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:55:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:55:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:55:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:55:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:55:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:55:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:55:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:55:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:55:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:55:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:55:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:55:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:55:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:55:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:55:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:55:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:55:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:55:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:55:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:55:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:55:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:55:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:55:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:56:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:56:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:56:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:56:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:56:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:56:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:56:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:56:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:56:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:56:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:56:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:56:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:56:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:56:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:56:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:56:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:56:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:56:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:56:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:56:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:56:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:56:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:56:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:56:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:56:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:56:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:56:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:56:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:56:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:56:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:56:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:56:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:56:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:56:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:56:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:56:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:56:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:56:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:56:20 IQ138000 wb-watchdog[7706]: [INFO] Interval #640 started. Waiting up to 60 seconds for error...
Oct 11 16:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:56:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:25 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 16:56:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6158] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6181] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6188] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6249] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6267] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6271] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6360] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6384] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6458] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6461] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6463] Config: added 'scan_ssid' value '1'
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6464] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6465] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.6466] Config: added 'psk' value '<hidden>'
Oct 11 16:56:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/451
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.7210] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:56:29 IQ138000 NetworkManager[403]: <info>  [1760201789.7212] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:56:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:56:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:56:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:56:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:56:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:56:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:56:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:56:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:56:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:56:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:56:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:56:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:56:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:56:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:56:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:56:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:56:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:56:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:56:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:56:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:56:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:56:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:56:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:56:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:56:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:56:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:56:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:56:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:56:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:56:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:56:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:56:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:56:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:56:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:56:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:56:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:56:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:56:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:56:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:56:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:56:55 IQ138000 NetworkManager[403]: <warn>  [1760201815.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:56:55 IQ138000 NetworkManager[403]: <info>  [1760201815.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:56:55 IQ138000 NetworkManager[403]: <warn>  [1760201815.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:56:55 IQ138000 NetworkManager[403]: <info>  [1760201815.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:56:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/451
Oct 11 16:56:55 IQ138000 NetworkManager[403]: <info>  [1760201815.0721] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:56:55 IQ138000 NetworkManager[403]: <info>  [1760201815.0723] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:56:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:01 IQ138000 NetworkManager[403]: <info>  [1760201821.3564] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:57:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:57:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:57:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:57:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:57:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:57:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:57:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:57:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:57:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:57:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:57:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:57:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:57:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:57:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:57:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:57:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:57:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:57:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:57:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:57:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:57:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:57:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:57:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:57:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:57:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:57:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:57:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:57:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:57:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:57:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:57:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:57:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:57:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:57:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:57:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:57:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:57:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:57:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:20 IQ138000 wb-watchdog[8330]: [INFO] Interval #641 started. Waiting up to 60 seconds for error...
Oct 11 16:57:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:57:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:57:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:57:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:57:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:57:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:57:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:57:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:57:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:57:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:57:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:57:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:57:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:57:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:57:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:57:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:57:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:57:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:57:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:57:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:57:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:57:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:57:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:57:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:57:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:57:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:57:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:57:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:57:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:57:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:57:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:57:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:57:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:57:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:57:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:57:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:57:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:57:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:57:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:57:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:57:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.4889] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.4893] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.4900] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:57:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.4983] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5008] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5009] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5128] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5163] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5196] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5201] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5202] Config: added 'scan_ssid' value '1'
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5203] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5205] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5206] Config: added 'psk' value '<hidden>'
Oct 11 16:57:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/452
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.5997] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:57:56 IQ138000 NetworkManager[403]: <info>  [1760201876.6001] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:58:20 IQ138000 wb-watchdog[9006]: [INFO] Interval #642 started. Waiting up to 60 seconds for error...
Oct 11 16:58:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:58:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:58:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:58:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:58:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:58:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:58:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:58:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:58:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:58:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:58:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:58:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:58:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:58:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:58:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:58:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:58:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:58:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:58:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:58:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:58:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:58:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:58:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:58:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:58:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:58:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:58:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:58:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:58:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:58:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:58:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:58:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:58:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:58:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:58:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:58:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:58:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:58:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:58:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:58:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:58:22 IQ138000 NetworkManager[403]: <warn>  [1760201902.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:58:22 IQ138000 NetworkManager[403]: <info>  [1760201902.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:58:22 IQ138000 NetworkManager[403]: <warn>  [1760201902.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:58:22 IQ138000 NetworkManager[403]: <info>  [1760201902.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:58:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:58:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/452
Oct 11 16:58:22 IQ138000 NetworkManager[403]: <info>  [1760201902.0710] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:58:22 IQ138000 NetworkManager[403]: <info>  [1760201902.0712] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:58:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:28 IQ138000 NetworkManager[403]: <info>  [1760201908.2051] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:58:32 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 16:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 16:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:58:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:58:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:58:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:58:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:58:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:58:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:58:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:58:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:58:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:58:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:58:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:58:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:58:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:58:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:58:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:58:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:58:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:58:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:58:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:58:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:58:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:58:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:58:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:58:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:58:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:58:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:58:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:58:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:58:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:58:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:58:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:58:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:58:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:58:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:58:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:58:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:58:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:58:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:58:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:58:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L3, row count 7183, limit 7042
Oct 11 16:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:58:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:58:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 16:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:59:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 16:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 16:59:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 16:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 16:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 16:59:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 16:59:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 16:59:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:59:20 IQ138000 wb-watchdog[9636]: [INFO] Interval #643 started. Waiting up to 60 seconds for error...
Oct 11 16:59:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:59:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:59:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:59:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:59:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:59:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:59:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:59:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:59:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:59:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:59:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:59:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:59:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:59:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:59:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:59:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:59:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:59:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:59:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:59:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:59:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:59:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:59:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:59:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:59:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:59:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:59:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:59:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:59:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:59:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:59:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:59:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:59:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:59:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:59:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:59:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:59:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 16:59:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 16:59:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 16:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6384] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6395] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6417] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6477] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6507] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6522] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6655] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6690] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6717] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6720] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6721] Config: added 'scan_ssid' value '1'
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6722] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6724] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 16:59:23 IQ138000 NetworkManager[403]: <info>  [1760201963.6724] Config: added 'psk' value '<hidden>'
Oct 11 16:59:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/453
Oct 11 16:59:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:26 IQ138000 NetworkManager[403]: <info>  [1760201966.7408] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 16:59:26 IQ138000 NetworkManager[403]: <info>  [1760201966.7410] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 16:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:59:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 16:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 16:59:49 IQ138000 NetworkManager[403]: <warn>  [1760201989.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 16:59:49 IQ138000 NetworkManager[403]: <info>  [1760201989.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 16:59:49 IQ138000 NetworkManager[403]: <warn>  [1760201989.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 16:59:49 IQ138000 NetworkManager[403]: <info>  [1760201989.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 16:59:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/453
Oct 11 16:59:49 IQ138000 NetworkManager[403]: <info>  [1760201989.0751] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 16:59:49 IQ138000 NetworkManager[403]: <info>  [1760201989.0753] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 16:59:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 16:59:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 16:59:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 16:59:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 16:59:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 16:59:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 16:59:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 16:59:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 16:59:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 16:59:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 16:59:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 16:59:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 16:59:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 16:59:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 16:59:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 16:59:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 16:59:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 16:59:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 16:59:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 16:59:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 16:59:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 16:59:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 16:59:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:59:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 16:59:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 16:59:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 16:59:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:59:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 16:59:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 16:59:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 16:59:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 16:59:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 16:59:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 16:59:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 16:59:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 16:59:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 16:59:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 16:59:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 16:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:55 IQ138000 NetworkManager[403]: <info>  [1760201995.3489] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 16:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 16:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 16:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:00:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:00:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:20 IQ138000 wb-watchdog[10331]: [INFO] Interval #644 started. Waiting up to 60 seconds for error...
Oct 11 17:00:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:00:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:00:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:00:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:00:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:00:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:00:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:00:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:00:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:00:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:00:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:00:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:00:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:00:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:00:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:00:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:00:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:00:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:00:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:00:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:00:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:00:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:00:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:00:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:00:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:00:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:00:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:00:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:00:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:00:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:00:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:00:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:00:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:00:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:00:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:00:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:00:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:00:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:00:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:00:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:00:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:00:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:00:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:00:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.5847] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.5852] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.5862] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.5931] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.5950] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.5952] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6039] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6058] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6074] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6077] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6079] Config: added 'scan_ssid' value '1'
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6081] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6082] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6083] Config: added 'psk' value '<hidden>'
Oct 11 17:00:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/454
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6787] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:00:50 IQ138000 NetworkManager[403]: <info>  [1760202050.6789] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:00:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:00:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:00:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:00:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:00:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:00:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:00:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:00:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:00:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:00:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:00:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:00:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:00:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:00:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:00:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:00:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:00:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:00:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:00:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:00:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:00:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:00:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:00:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:00:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:00:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:00:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:00:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:00:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:00:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:00:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:00:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:00:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:00:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:00:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:00:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:00:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:00:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:00:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:01:16 IQ138000 NetworkManager[403]: <warn>  [1760202076.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:01:16 IQ138000 NetworkManager[403]: <info>  [1760202076.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:01:16 IQ138000 NetworkManager[403]: <warn>  [1760202076.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:01:16 IQ138000 NetworkManager[403]: <info>  [1760202076.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:01:16 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:01:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/454
Oct 11 17:01:16 IQ138000 NetworkManager[403]: <info>  [1760202076.0697] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:01:16 IQ138000 NetworkManager[403]: <info>  [1760202076.0699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:01:16 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:01:20 IQ138000 wb-watchdog[10947]: [INFO] Interval #645 started. Waiting up to 60 seconds for error...
Oct 11 17:01:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:01:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:01:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:01:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:01:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:01:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:01:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:01:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:01:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:01:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:01:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:01:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:01:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:01:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:01:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:01:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:01:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:01:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:01:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:01:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:01:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:01:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:01:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:01:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:01:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:01:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:01:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:01:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:01:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:01:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:01:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:01:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:01:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:01:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:01:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:01:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:01:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:01:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:01:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:01:22 IQ138000 NetworkManager[403]: <info>  [1760202082.3284] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:01:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:01:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:01:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:01:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:01:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:01:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:01:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:01:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:01:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:01:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:01:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:01:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:01:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:01:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:01:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:01:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:01:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:01:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:01:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:01:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:01:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:01:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:01:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:01:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:01:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:01:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:01:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:01:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:01:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:01:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:01:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:01:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:01:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:01:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:01:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:01:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:01:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:01:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:01:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:01:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:01:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:01:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:02:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4029] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4069] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4080] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4188] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4211] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4213] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4354] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4379] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4403] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4407] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4408] Config: added 'scan_ssid' value '1'
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4409] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4410] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:02:17 IQ138000 NetworkManager[403]: <info>  [1760202137.4413] Config: added 'psk' value '<hidden>'
Oct 11 17:02:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/455
Oct 11 17:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:02:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:02:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:20 IQ138000 NetworkManager[403]: <info>  [1760202140.5453] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:02:20 IQ138000 NetworkManager[403]: <info>  [1760202140.5456] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:02:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:20 IQ138000 wb-watchdog[11658]: [INFO] Interval #646 started. Waiting up to 60 seconds for error...
Oct 11 17:02:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:02:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:02:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:02:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:02:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:02:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:02:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:02:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:02:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:02:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:02:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:02:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:02:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:02:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:02:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:02:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:02:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:02:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:02:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:02:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:02:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:02:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:02:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:02:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:02:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:02:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:02:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:02:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:02:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:02:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:02:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:02:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:02:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:02:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:02:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:02:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:02:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:02:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:43 IQ138000 NetworkManager[403]: <warn>  [1760202163.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:02:43 IQ138000 NetworkManager[403]: <info>  [1760202163.0242] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:02:43 IQ138000 NetworkManager[403]: <warn>  [1760202163.0303] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:02:43 IQ138000 NetworkManager[403]: <info>  [1760202163.0339] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:02:43 IQ138000 NetworkManager[403]: <info>  [1760202163.0341] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:02:43 IQ138000 NetworkManager[403]: <info>  [1760202163.0425] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:02:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/455
Oct 11 17:02:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:02:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:49 IQ138000 NetworkManager[403]: <info>  [1760202169.1782] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:02:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:02:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:02:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:02:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:02:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:02:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:02:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:02:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:02:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:02:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:02:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:02:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:02:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:02:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:02:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:02:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:02:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:02:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:02:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:02:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:02:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:02:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:02:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:02:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:02:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:02:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:02:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:02:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:02:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:02:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:02:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:02:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:02:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:02:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:02:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:02:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:02:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:02:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:02:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:02:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:02:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:03:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:03:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:03:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:03:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:03:20 IQ138000 wb-watchdog[12262]: [INFO] Interval #647 started. Waiting up to 60 seconds for error...
Oct 11 17:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 9984 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:03:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:03:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:03:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:03:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:03:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:03:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:03:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:03:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:03:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:03:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:03:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:03:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:03:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:03:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:03:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:03:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:03:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:03:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:03:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:03:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:03:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:03:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:03:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:03:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:03:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:03:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:03:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:03:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:03:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:03:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:03:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:03:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:03:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:03:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:03:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:03:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:03:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:03:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_40/External Sensor 1, row count 7183, limit 7042
Oct 11 17:03:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.2849] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.2854] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.2861] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.2920] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.2949] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.2953] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3033] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3056] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3076] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3079] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3080] Config: added 'scan_ssid' value '1'
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3081] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3083] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3083] Config: added 'psk' value '<hidden>'
Oct 11 17:03:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/456
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3926] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:03:44 IQ138000 NetworkManager[403]: <info>  [1760202224.3928] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:03:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:03:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:03:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:03:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:03:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:03:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:03:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:03:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:03:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:03:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:03:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:03:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:03:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:03:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:03:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:03:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:03:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:03:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:03:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:03:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:03:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:03:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:03:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:03:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:03:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:03:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:03:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:03:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:03:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:03:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:03:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:03:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:03:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:03:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:03:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:03:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:03:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:03:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:03:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:03:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:03:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:03:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:04:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:04:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:10 IQ138000 NetworkManager[403]: <warn>  [1760202250.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:04:10 IQ138000 NetworkManager[403]: <info>  [1760202250.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:04:10 IQ138000 NetworkManager[403]: <warn>  [1760202250.0238] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:04:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:04:10 IQ138000 NetworkManager[403]: <info>  [1760202250.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:04:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/456
Oct 11 17:04:10 IQ138000 NetworkManager[403]: <info>  [1760202250.0693] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:04:10 IQ138000 NetworkManager[403]: <info>  [1760202250.0695] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:04:16 IQ138000 NetworkManager[403]: <info>  [1760202256.0162] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:04:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:04:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:04:20 IQ138000 wb-watchdog[12960]: [INFO] Interval #648 started. Waiting up to 60 seconds for error...
Oct 11 17:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:04:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:04:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:04:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:04:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:04:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:04:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:04:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:04:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:04:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:04:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:04:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:04:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:04:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:04:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:04:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:04:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:04:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:04:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:04:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:04:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:04:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:04:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:04:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:04:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:04:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:04:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:04:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:04:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:04:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:04:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:04:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:04:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:04:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:04:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:04:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:04:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:47 IQ138000 npm[3801]: [2025-10-11 17:04:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":36.16,"last_seen":1760202287571,"linkquality":91,"power_outage_count":48745,"temperature":27.04,"voltage":3025}'
Oct 11 17:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:04:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:04:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:04:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:04:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:04:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:04:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:04:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:04:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:04:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:04:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:04:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:04:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:04:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:04:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:04:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:04:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:04:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:04:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:04:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:04:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:04:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:04:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:04:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:04:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:04:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:04:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:04:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:04:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:04:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:04:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:04:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:04:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:04:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:04:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:04:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:04:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:04:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:04:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:04:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:04:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:04:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:01 IQ138000 CRON[13342]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:05:01 IQ138000 CRON[13346]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 17:05:01 IQ138000 CRON[13342]: pam_unix(cron:session): session closed for user root
Oct 11 17:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:05:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3047] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3052] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3057] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3111] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3129] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3131] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3248] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3271] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3289] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3293] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3294] Config: added 'scan_ssid' value '1'
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3295] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3296] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:05:11 IQ138000 NetworkManager[403]: <info>  [1760202311.3297] Config: added 'psk' value '<hidden>'
Oct 11 17:05:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/457
Oct 11 17:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:05:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:05:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:15 IQ138000 NetworkManager[403]: <info>  [1760202315.4062] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:05:15 IQ138000 NetworkManager[403]: <info>  [1760202315.4065] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:20 IQ138000 wb-watchdog[13584]: [INFO] Interval #649 started. Waiting up to 60 seconds for error...
Oct 11 17:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:05:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:05:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:05:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:05:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:05:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:05:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:05:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:05:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:05:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:05:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:05:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:05:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:05:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:05:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:05:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:05:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:05:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:05:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:05:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:05:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:05:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:05:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:05:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:05:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:05:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:05:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:05:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:05:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:05:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:05:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:05:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:05:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:05:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:05:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:05:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:05:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:05:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:37 IQ138000 NetworkManager[403]: <warn>  [1760202337.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:05:37 IQ138000 NetworkManager[403]: <info>  [1760202337.0228] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:05:37 IQ138000 NetworkManager[403]: <warn>  [1760202337.0278] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:05:37 IQ138000 NetworkManager[403]: <info>  [1760202337.0285] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:05:37 IQ138000 NetworkManager[403]: <info>  [1760202337.0286] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:05:37 IQ138000 NetworkManager[403]: <info>  [1760202337.0334] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:05:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/457
Oct 11 17:05:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L1, row count 7183, limit 7042
Oct 11 17:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:05:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:43 IQ138000 NetworkManager[403]: <info>  [1760202343.0506] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:05:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:05:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:05:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:05:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:05:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:05:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:05:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:05:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:05:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:05:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:05:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:05:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:05:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:05:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:05:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:05:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:05:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:05:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:05:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:05:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:05:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:05:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:05:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:05:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:05:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:05:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:05:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:05:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:05:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:05:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:05:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:05:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:05:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:05:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:05:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:05:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:06:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:06:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:06:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:06:20 IQ138000 wb-watchdog[14287]: [INFO] Interval #650 started. Waiting up to 60 seconds for error...
Oct 11 17:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:06:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:06:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:06:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:06:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:06:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:06:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:06:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:06:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:06:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:06:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:06:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:06:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:06:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:06:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:06:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:06:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:06:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:06:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:06:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:06:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:06:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:06:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:06:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:06:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:06:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:06:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:06:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:06:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:06:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:06:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:06:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:06:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:06:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:06:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:06:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:06:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:06:29 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 17:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:06:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:06:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.1958] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.1973] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.1980] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2078] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2113] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2115] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2302] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2332] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2355] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2358] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2359] Config: added 'scan_ssid' value '1'
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2360] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2362] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.2362] Config: added 'psk' value '<hidden>'
Oct 11 17:06:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/458
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.3059] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:06:38 IQ138000 NetworkManager[403]: <info>  [1760202398.3061] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:06:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:06:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:06:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:06:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:06:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:06:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:06:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:06:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:06:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:06:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:06:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:06:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:06:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:06:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:06:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:06:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:06:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:06:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:06:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:06:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:06:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:06:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:06:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:06:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:06:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:06:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:06:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:06:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:06:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:06:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:06:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:06:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:06:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:06:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:06:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:06:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:06:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:06:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:03 IQ138000 NetworkManager[403]: <warn>  [1760202423.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:07:03 IQ138000 NetworkManager[403]: <info>  [1760202423.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:07:03 IQ138000 NetworkManager[403]: <warn>  [1760202423.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:07:03 IQ138000 NetworkManager[403]: <info>  [1760202423.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:07:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/458
Oct 11 17:07:03 IQ138000 NetworkManager[403]: <info>  [1760202423.0703] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:07:03 IQ138000 NetworkManager[403]: <info>  [1760202423.0705] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:08 IQ138000 NetworkManager[403]: <info>  [1760202428.9482] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 9228 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:07:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:07:21 IQ138000 wb-watchdog[14905]: [INFO] Interval #651 started. Waiting up to 60 seconds for error...
Oct 11 17:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:07:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:07:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:07:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:07:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:07:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:07:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:07:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:07:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:07:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:07:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:07:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:07:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:07:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:07:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:07:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:07:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:07:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:07:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:07:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:07:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:07:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:07:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:07:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:07:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:07:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:07:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:07:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:07:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:07:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:07:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:07:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:07:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:07:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:07:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:07:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:07:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:07:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:07:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L3, row count 7183, limit 7042
Oct 11 17:07:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:07:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:07:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:07:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:07:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:07:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:07:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:07:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:07:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:07:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:07:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:07:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:07:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:07:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:07:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:07:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:07:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:07:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:07:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:07:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:07:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:07:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:07:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:07:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:07:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:07:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:07:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:07:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:07:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:07:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:07:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:07:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:07:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:07:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:07:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:07:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:07:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:01 IQ138000 CRON[15378]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:08:01 IQ138000 CRON[15382]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 17:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:03 IQ138000 sSMTP[15401]: Unable to locate mail
Oct 11 17:08:03 IQ138000 cron[15401]: sendmail: Cannot open mail:25
Oct 11 17:08:03 IQ138000 sSMTP[15401]: Cannot open mail:25
Oct 11 17:08:03 IQ138000 CRON[15378]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 17:08:03 IQ138000 CRON[15378]: pam_unix(cron:session): session closed for user root
Oct 11 17:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9663] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9668] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9673] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9730] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9747] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9749] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9836] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9857] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9873] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9876] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9878] Config: added 'scan_ssid' value '1'
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9949] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9951] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:08:03 IQ138000 NetworkManager[403]: <info>  [1760202483.9951] Config: added 'psk' value '<hidden>'
Oct 11 17:08:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/459
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:04 IQ138000 NetworkManager[403]: <info>  [1760202484.0743] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:08:04 IQ138000 NetworkManager[403]: <info>  [1760202484.0745] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:08:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:08:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:21 IQ138000 wb-watchdog[15622]: [INFO] Interval #652 started. Waiting up to 60 seconds for error...
Oct 11 17:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:08:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:08:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:08:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:08:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:08:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:08:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:08:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:08:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:08:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:08:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:08:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:08:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:08:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:08:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:08:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:08:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:08:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:08:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:08:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:08:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:08:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:08:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:08:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:08:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:08:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:08:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:08:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:08:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:08:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:08:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:08:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:08:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:08:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:08:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:08:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:08:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:08:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:29 IQ138000 NetworkManager[403]: <warn>  [1760202509.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:08:29 IQ138000 NetworkManager[403]: <info>  [1760202509.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:08:29 IQ138000 NetworkManager[403]: <warn>  [1760202509.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:08:29 IQ138000 NetworkManager[403]: <info>  [1760202509.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:08:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/459
Oct 11 17:08:29 IQ138000 NetworkManager[403]: <info>  [1760202509.0654] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:08:29 IQ138000 NetworkManager[403]: <info>  [1760202509.0656] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:34 IQ138000 NetworkManager[403]: <info>  [1760202514.7310] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:08:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17164 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:08:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:08:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:08:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:08:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:08:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:08:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:08:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:08:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:08:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:08:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:08:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:08:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:08:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:08:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:08:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:08:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:08:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:08:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:08:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:08:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:08:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:08:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:08:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:08:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:08:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:08:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:08:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:08:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:08:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:08:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:08:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:08:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:08:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:08:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:08:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:08:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:08:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:09:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:09:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:09:21 IQ138000 wb-watchdog[16238]: [INFO] Interval #653 started. Waiting up to 60 seconds for error...
Oct 11 17:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:09:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:09:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:09:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:09:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:09:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:09:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:09:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:09:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:09:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:09:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:09:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:09:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:09:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:09:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:09:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:09:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:09:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:09:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:09:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:09:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:09:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:09:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:09:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:09:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:09:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:09:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:09:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:09:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:09:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:09:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:09:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:09:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:09:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:09:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:09:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:09:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8345] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8350] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8356] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8423] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8457] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8460] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8554] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8573] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8591] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8595] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8596] Config: added 'scan_ssid' value '1'
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8597] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8599] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.8600] Config: added 'psk' value '<hidden>'
Oct 11 17:09:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/460
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.9296] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:09:29 IQ138000 NetworkManager[403]: <info>  [1760202569.9298] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4886 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:34 IQ138000 npm[3801]: [2025-10-11 17:09:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":36.16,"last_seen":1760202574423,"linkquality":102,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 17:09:34 IQ138000 npm[3801]: [2025-10-11 17:09:34] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.22,"last_seen":1760202574440,"linkquality":102,"power_outage_count":48745,"temperature":26.88,"voltage":3025}'
Oct 11 17:09:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:09:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:09:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:09:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:09:55 IQ138000 NetworkManager[403]: <warn>  [1760202595.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:09:55 IQ138000 NetworkManager[403]: <info>  [1760202595.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:09:55 IQ138000 NetworkManager[403]: <warn>  [1760202595.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:09:55 IQ138000 NetworkManager[403]: <info>  [1760202595.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:09:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/460
Oct 11 17:09:55 IQ138000 NetworkManager[403]: <info>  [1760202595.0702] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:09:55 IQ138000 NetworkManager[403]: <info>  [1760202595.0704] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:09:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:09:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:09:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:09:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:09:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:09:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:09:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:09:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:09:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:09:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:09:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:09:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:09:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:09:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:09:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:09:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:09:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:09:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:09:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:09:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:09:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:09:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:09:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:09:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:09:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:09:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:09:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:09:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:09:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:09:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:09:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:09:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:09:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:09:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:09:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:09:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:09:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:01 IQ138000 NetworkManager[403]: <info>  [1760202601.5534] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17432 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:10:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:10:21 IQ138000 wb-watchdog[16937]: [INFO] Interval #654 started. Waiting up to 60 seconds for error...
Oct 11 17:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:10:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:10:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:10:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:10:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:10:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:10:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:10:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:10:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:10:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:10:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:10:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:10:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:10:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:10:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:10:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:10:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:10:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:10:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:10:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:10:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:10:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:10:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:10:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:10:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:10:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:10:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:10:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:10:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:10:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:10:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:10:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:10:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:10:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:10:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:10:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:10:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:10:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:10:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 12440 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:10:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:10:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:10:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:10:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:10:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:10:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:10:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:10:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:10:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:10:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:10:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:10:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:10:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:10:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:10:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:10:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:10:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:10:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:10:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:10:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:10:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:10:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:10:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:10:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:10:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:10:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:10:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:10:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:10:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:10:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:10:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:10:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:10:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:10:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:10:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:10:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:10:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:10:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:10:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:10:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6521] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6526] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6542] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6599] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6617] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6618] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6737] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6770] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6800] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6804] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6805] Config: added 'scan_ssid' value '1'
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6806] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6807] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.6808] Config: added 'psk' value '<hidden>'
Oct 11 17:10:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/461
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.7548] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:10:56 IQ138000 NetworkManager[403]: <info>  [1760202656.7552] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:11:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 17:11:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 17:11:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 17:11:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 17:11:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 17:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:11:21 IQ138000 wb-watchdog[17555]: [INFO] Interval #655 started. Waiting up to 60 seconds for error...
Oct 11 17:11:22 IQ138000 NetworkManager[403]: <warn>  [1760202682.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:11:22 IQ138000 NetworkManager[403]: <info>  [1760202682.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:11:22 IQ138000 NetworkManager[403]: <warn>  [1760202682.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:11:22 IQ138000 NetworkManager[403]: <info>  [1760202682.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:11:22 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/461
Oct 11 17:11:22 IQ138000 NetworkManager[403]: <info>  [1760202682.0631] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:11:22 IQ138000 NetworkManager[403]: <info>  [1760202682.0633] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:11:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:11:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:11:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:11:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:11:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:11:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:11:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:11:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:11:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:11:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:11:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:11:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:11:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:11:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:11:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:11:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:11:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:11:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:11:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:11:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:11:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:11:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:11:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:11:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:11:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:11:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:11:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:11:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:11:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:11:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:11:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:11:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:11:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:11:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:11:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:11:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:11:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:11:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:28 IQ138000 NetworkManager[403]: <info>  [1760202688.4006] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:11:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:11:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:11:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:11:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:11:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:11:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:11:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:11:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:11:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:11:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:11:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:11:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:11:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:11:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:11:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:11:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:11:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:11:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:11:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:11:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:11:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:11:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:11:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:11:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:11:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:11:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:11:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:11:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:11:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:11:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:11:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:11:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:11:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:11:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:11:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:11:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:11:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:11:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:11:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:11:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:11:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:11:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:12:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:12:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:12:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:12:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:12:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16912 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:21 IQ138000 wb-watchdog[18244]: [INFO] Interval #656 started. Waiting up to 60 seconds for error...
Oct 11 17:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7232] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7238] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7248] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7350] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7368] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7370] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7488] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7532] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7553] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7557] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7558] Config: added 'scan_ssid' value '1'
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7558] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7559] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.7560] Config: added 'psk' value '<hidden>'
Oct 11 17:12:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/462
Oct 11 17:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.8376] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:12:23 IQ138000 NetworkManager[403]: <info>  [1760202743.8378] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:12:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:12:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:12:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:12:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:12:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:12:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:12:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:12:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:12:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:12:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:12:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:12:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:12:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:12:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:12:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:12:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:12:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:12:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:12:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:12:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:12:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:12:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:12:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:12:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:12:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:12:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:12:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:12:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:12:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:12:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:12:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:12:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:12:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:12:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:12:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:12:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:12:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:12:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:12:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:12:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:12:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:12:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:12:49 IQ138000 NetworkManager[403]: <warn>  [1760202769.0208] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:12:49 IQ138000 NetworkManager[403]: <info>  [1760202769.0210] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:12:49 IQ138000 NetworkManager[403]: <warn>  [1760202769.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:12:49 IQ138000 NetworkManager[403]: <info>  [1760202769.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:12:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/462
Oct 11 17:12:49 IQ138000 NetworkManager[403]: <info>  [1760202769.0687] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:12:49 IQ138000 NetworkManager[403]: <info>  [1760202769.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:12:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:12:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:12:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:12:55 IQ138000 NetworkManager[403]: <info>  [1760202775.5007] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:12:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:12:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:12:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:12:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:12:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:12:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:12:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:12:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:12:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:12:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:12:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:12:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:12:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:12:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:12:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:12:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:12:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:12:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:12:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:12:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:12:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:12:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:12:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:12:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:12:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:12:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:12:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:12:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:12:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:12:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:12:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:12:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:12:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:12:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:12:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:12:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:12:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:13:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:13:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:13:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:21 IQ138000 wb-watchdog[18873]: [INFO] Interval #657 started. Waiting up to 60 seconds for error...
Oct 11 17:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:13:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:13:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:13:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:13:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:13:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:13:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:13:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:13:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:13:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:13:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:13:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:13:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:13:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:13:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:13:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:13:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:13:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:13:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:13:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:13:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:13:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:13:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:13:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:13:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:13:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:13:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:13:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:13:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:13:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:13:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:13:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:13:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:13:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:13:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:13:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:13:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:13:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:13:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:13:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:13:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:13:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:13:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:13:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7665] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7683] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7690] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7753] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7771] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7773] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7878] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7928] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7950] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7954] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7955] Config: added 'scan_ssid' value '1'
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7958] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7962] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.7964] Config: added 'psk' value '<hidden>'
Oct 11 17:13:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/463
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.8782] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:13:50 IQ138000 NetworkManager[403]: <info>  [1760202830.8784] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:13:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:13:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:13:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:13:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:13:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:13:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:13:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:13:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:13:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:13:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:13:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:13:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:13:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:13:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:13:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:13:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:13:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:13:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:13:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:13:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:13:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:13:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:13:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:13:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:13:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:13:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:13:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:13:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:13:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:13:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:13:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:13:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:13:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:13:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:13:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:13:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:13:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:13:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:13:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:13:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:13:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:14:16 IQ138000 NetworkManager[403]: <warn>  [1760202856.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:14:16 IQ138000 NetworkManager[403]: <info>  [1760202856.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:14:16 IQ138000 NetworkManager[403]: <warn>  [1760202856.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:14:16 IQ138000 NetworkManager[403]: <info>  [1760202856.0378] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:14:16 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/463
Oct 11 17:14:16 IQ138000 NetworkManager[403]: <info>  [1760202856.0829] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:14:16 IQ138000 NetworkManager[403]: <info>  [1760202856.0831] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:21 IQ138000 wb-watchdog[19577]: [INFO] Interval #658 started. Waiting up to 60 seconds for error...
Oct 11 17:14:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:22 IQ138000 NetworkManager[403]: <info>  [1760202862.5450] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:14:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:14:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:14:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:14:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:14:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:14:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:14:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:14:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:14:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:14:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:14:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:14:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:14:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:14:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:14:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:14:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:14:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:14:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:14:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:14:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:14:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:14:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:14:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:14:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:14:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:14:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:14:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:14:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:14:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:14:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:14:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:14:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:14:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:14:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:14:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:14:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:14:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:14:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:14:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:14:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:14:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:14:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:14:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:14:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:14:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:14:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:14:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:14:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:14:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:14:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:14:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:14:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:14:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:14:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:14:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:14:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:14:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:14:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:14:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:14:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:14:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:14:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:14:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:14:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:14:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:14:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:14:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:14:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:14:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:14:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:14:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:14:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:14:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:14:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:01 IQ138000 CRON[19938]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:15:01 IQ138000 CRON[19946]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 17:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:15:01 IQ138000 CRON[19938]: pam_unix(cron:session): session closed for user root
Oct 11 17:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:15:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.8887] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.8892] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.8899] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9049] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9071] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9073] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9181] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9204] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9225] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9239] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9241] Config: added 'scan_ssid' value '1'
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9242] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9243] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9244] Config: added 'psk' value '<hidden>'
Oct 11 17:15:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/464
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9902] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:15:17 IQ138000 NetworkManager[403]: <info>  [1760202917.9905] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:15:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:15:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:15:21 IQ138000 wb-watchdog[20187]: [INFO] Interval #659 started. Waiting up to 60 seconds for error...
Oct 11 17:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:15:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:15:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:15:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:15:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:15:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:15:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:15:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:15:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:15:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:15:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:15:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:15:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:15:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:15:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:15:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:15:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:15:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:15:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:15:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:15:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:15:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:15:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:15:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:15:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:15:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:15:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:15:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:15:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:15:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:15:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:15:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:15:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:15:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:15:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:15:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:15:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:15:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:15:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:15:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:15:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:15:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16928 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:43 IQ138000 NetworkManager[403]: <warn>  [1760202943.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:15:43 IQ138000 NetworkManager[403]: <info>  [1760202943.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:15:43 IQ138000 NetworkManager[403]: <warn>  [1760202943.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:15:43 IQ138000 NetworkManager[403]: <info>  [1760202943.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:15:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/464
Oct 11 17:15:43 IQ138000 NetworkManager[403]: <info>  [1760202943.0696] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:15:43 IQ138000 NetworkManager[403]: <info>  [1760202943.0699] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:48 IQ138000 NetworkManager[403]: <info>  [1760202948.6469] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:15:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:15:52 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:15:52 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:15:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:15:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:15:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:15:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:15:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:15:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:15:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:15:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:15:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:15:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:15:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:15:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:15:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:15:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:15:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:15:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:15:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:15:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:15:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:15:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:15:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:15:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:15:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:15:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:15:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:15:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:15:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:15:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:15:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:15:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:15:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:15:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:15:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:15:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:15:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:15:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:15:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:15:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:15:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:16:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:16:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:16:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:21 IQ138000 wb-watchdog[20901]: [INFO] Interval #660 started. Waiting up to 60 seconds for error...
Oct 11 17:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:16:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:16:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:16:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:16:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:16:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:16:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:16:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:16:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:16:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:16:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:16:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:16:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:16:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:16:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:16:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:16:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:16:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:16:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:16:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:16:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:16:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:16:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:16:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:16:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:16:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:16:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:16:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:16:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:16:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:16:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:16:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:16:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:16:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:16:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:16:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:16:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:16:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:33 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 17:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8337] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8342] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8348] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8424] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8441] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8443] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8584] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8618] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8637] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8641] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8642] Config: added 'scan_ssid' value '1'
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8643] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8645] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.8646] Config: added 'psk' value '<hidden>'
Oct 11 17:16:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/465
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.9367] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:16:43 IQ138000 NetworkManager[403]: <info>  [1760203003.9369] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:16:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 18177 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:16:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:16:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:16:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:16:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:16:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:16:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:16:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:16:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:16:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:16:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:16:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:16:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:16:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:16:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:16:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:16:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:16:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:16:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:16:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:16:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:16:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:16:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:16:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:16:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:16:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:16:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:16:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:16:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:16:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:16:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:16:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:16:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:16:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:16:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:16:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:16:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:16:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:16:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:01 IQ138000 CRON[21265]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:17:01 IQ138000 CRON[21269]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 17:17:01 IQ138000 CRON[21265]: pam_unix(cron:session): session closed for user root
Oct 11 17:17:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:17:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:17:09 IQ138000 NetworkManager[403]: <warn>  [1760203029.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:17:09 IQ138000 NetworkManager[403]: <info>  [1760203029.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:17:09 IQ138000 NetworkManager[403]: <warn>  [1760203029.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:17:09 IQ138000 NetworkManager[403]: <info>  [1760203029.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:17:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/465
Oct 11 17:17:09 IQ138000 NetworkManager[403]: <info>  [1760203029.0708] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:17:09 IQ138000 NetworkManager[403]: <info>  [1760203029.0710] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:17:15 IQ138000 NetworkManager[403]: <info>  [1760203035.6389] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:17:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:17:21 IQ138000 wb-watchdog[21517]: [INFO] Interval #661 started. Waiting up to 60 seconds for error...
Oct 11 17:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:17:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:17:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 5893 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:17:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:17:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:17:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:17:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:17:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:17:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:17:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:17:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:17:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:17:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:17:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:17:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:17:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:17:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:17:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:17:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:17:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:17:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:17:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:17:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:17:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:17:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:17:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:17:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:17:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:17:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:17:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:17:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:17:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:17:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:17:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:17:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:17:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:17:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:17:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:17:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:17:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:17:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:17:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:17:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:17:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:17:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:17:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:17:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:17:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:17:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:17:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:17:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:17:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:17:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:17:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:17:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:17:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:17:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:17:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:17:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:17:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:17:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:17:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:17:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:17:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:17:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:17:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:17:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:17:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:17:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:17:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:17:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:17:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:17:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:17:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:17:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7644] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7650] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7658] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7720] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7741] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7823] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7841] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7858] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7861] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7862] Config: added 'scan_ssid' value '1'
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7863] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7864] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.7865] Config: added 'psk' value '<hidden>'
Oct 11 17:18:10 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/466
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.8582] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:18:10 IQ138000 NetworkManager[403]: <info>  [1760203090.8584] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:18:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:18:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:18:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:18:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:18:21 IQ138000 wb-watchdog[22219]: [INFO] Interval #662 started. Waiting up to 60 seconds for error...
Oct 11 17:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:18:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:18:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:18:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:18:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:18:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:18:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:18:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:18:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:18:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:18:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:18:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:18:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:18:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:18:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:18:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:18:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:18:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:18:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:18:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:18:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:18:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:18:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:18:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:18:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:18:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:18:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:18:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:18:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:18:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:18:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:18:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:18:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:18:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:18:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:18:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:18:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:18:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:18:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:18:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:36 IQ138000 NetworkManager[403]: <warn>  [1760203116.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:18:36 IQ138000 NetworkManager[403]: <info>  [1760203116.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:18:36 IQ138000 NetworkManager[403]: <warn>  [1760203116.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:18:36 IQ138000 NetworkManager[403]: <info>  [1760203116.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:18:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/466
Oct 11 17:18:36 IQ138000 NetworkManager[403]: <info>  [1760203116.0651] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:18:36 IQ138000 NetworkManager[403]: <info>  [1760203116.0667] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:18:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:18:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:18:42 IQ138000 NetworkManager[403]: <info>  [1760203122.5324] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:18:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:18:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:18:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:18:54 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:18:54 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:18:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:18:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:18:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:18:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:18:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:18:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:18:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:18:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:18:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:18:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:18:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:18:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:18:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:18:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:18:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:18:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:18:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:18:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:18:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:18:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:18:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:18:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:18:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:18:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:18:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:18:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:18:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:18:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:18:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:18:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:18:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:18:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:18:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:18:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:18:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:18:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:18:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:18:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:19:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 17:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:19:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:19:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:19:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:21 IQ138000 wb-watchdog[22847]: [INFO] Interval #663 started. Waiting up to 60 seconds for error...
Oct 11 17:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:19:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:19:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:19:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:19:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:19:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:19:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:19:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:19:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:19:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:19:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:19:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:19:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:19:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:19:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:19:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:19:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:19:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:19:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:19:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:19:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:19:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:19:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:19:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:19:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:19:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:19:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:19:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:19:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:19:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:19:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:19:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:19:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:19:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:19:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:19:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:19:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L1, row count 7183, limit 7042
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7256] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7261] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7267] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7364] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7393] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7409] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7528] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7565] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7598] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7615] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7626] Config: added 'scan_ssid' value '1'
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7635] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7642] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:19:37 IQ138000 NetworkManager[403]: <info>  [1760203177.7644] Config: added 'psk' value '<hidden>'
Oct 11 17:19:37 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/467
Oct 11 17:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:38 IQ138000 NetworkManager[403]: <info>  [1760203178.8329] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:19:38 IQ138000 NetworkManager[403]: <info>  [1760203178.8331] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:19:48 IQ138000 npm[3801]: [2025-10-11 17:19:48] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":45.55,"last_seen":1760203188112,"linkquality":43,"power_outage_count":35250,"temperature":24.24,"voltage":3075}'
Oct 11 17:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:19:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:19:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:19:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:19:59 IQ138000 npm[3801]: [2025-10-11 17:19:59] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.12,"last_seen":1760203199417,"linkquality":61,"power_outage_count":25795,"pressure":991.7,"temperature":22.9,"voltage":2995}'
Oct 11 17:19:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:19:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:19:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:19:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:19:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:19:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:19:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:19:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:19:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:19:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:19:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:19:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:19:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:19:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:19:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:19:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:19:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:19:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:19:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:19:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:19:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:19:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:19:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:19:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:19:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:19:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:19:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:19:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:19:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:19:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:19:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:19:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:19:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:19:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:19:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:19:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:19:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:19:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:20:03 IQ138000 NetworkManager[403]: <warn>  [1760203203.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:20:03 IQ138000 NetworkManager[403]: <info>  [1760203203.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:20:03 IQ138000 NetworkManager[403]: <warn>  [1760203203.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:20:03 IQ138000 NetworkManager[403]: <info>  [1760203203.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:20:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/467
Oct 11 17:20:03 IQ138000 NetworkManager[403]: <info>  [1760203203.0699] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:20:03 IQ138000 NetworkManager[403]: <info>  [1760203203.0701] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:20:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:09 IQ138000 NetworkManager[403]: <info>  [1760203209.5047] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:20:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:20:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:20:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:20:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:21 IQ138000 wb-watchdog[23540]: [INFO] Interval #664 started. Waiting up to 60 seconds for error...
Oct 11 17:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:20:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:20:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:20:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:20:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:20:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:20:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:20:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:20:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:20:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:20:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:20:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:20:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:20:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:20:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:20:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:20:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:20:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:20:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:20:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:20:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:20:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:20:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:20:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:20:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:20:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:20:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:20:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:20:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:20:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:20:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:20:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:20:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:20:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:20:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:20:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:20:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:20:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:20:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:20:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:20:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:21:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:21:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:21:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:21:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:21:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:21:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:21:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:21:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:21:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:21:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:21:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:21:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:21:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:21:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:21:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:21:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:21:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:21:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:21:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:21:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:21:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:21:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:21:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:21:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:21:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:21:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:21:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:21:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:21:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:21:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:21:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:21:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:21:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:21:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:21:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:21:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.5926] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.5938] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.5944] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6004] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6021] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6023] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6151] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6197] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6238] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6242] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6244] Config: added 'scan_ssid' value '1'
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6244] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6245] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6246] Config: added 'psk' value '<hidden>'
Oct 11 17:21:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/468
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6892] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:21:04 IQ138000 NetworkManager[403]: <info>  [1760203264.6895] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:21:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:21:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:21:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:21:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:21:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:21:21 IQ138000 wb-watchdog[24152]: [INFO] Interval #665 started. Waiting up to 60 seconds for error...
Oct 11 17:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:30 IQ138000 NetworkManager[403]: <warn>  [1760203290.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:21:30 IQ138000 NetworkManager[403]: <info>  [1760203290.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:21:30 IQ138000 NetworkManager[403]: <warn>  [1760203290.0257] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:21:30 IQ138000 NetworkManager[403]: <info>  [1760203290.0274] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:21:30 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:21:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/468
Oct 11 17:21:30 IQ138000 NetworkManager[403]: <info>  [1760203290.0710] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:21:30 IQ138000 NetworkManager[403]: <info>  [1760203290.0712] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:21:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:21:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:21:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:21:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:21:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:21:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:21:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:21:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:21:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:21:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:21:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:21:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:21:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:21:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:21:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:21:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:21:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:21:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:21:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:21:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:21:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:21:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:21:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:21:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:21:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:21:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:21:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:21:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:21:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:21:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:21:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:21:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:21:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:21:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:21:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:21:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:21:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:36 IQ138000 NetworkManager[403]: <info>  [1760203296.3042] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:21:42 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:21:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:21:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:21:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:22:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:22:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:22:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:22:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:22:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:22:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:22:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:22:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:22:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:22:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:22:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:22:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:22:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:22:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:22:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:22:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:22:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:22:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:22:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:22:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:22:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:22:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:22:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:22:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:22:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:22:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:22:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:22:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:22:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:22:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:22:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:22:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:22:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:22:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:22:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:22:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:22:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:22:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:22:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:21 IQ138000 wb-watchdog[24854]: [INFO] Interval #666 started. Waiting up to 60 seconds for error...
Oct 11 17:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17160 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:22:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:22:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:22:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:22:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:22:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:22:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:22:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:22:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:22:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:22:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:22:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:22:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:22:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:22:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:22:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:22:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:22:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:22:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:22:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:22:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:22:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:22:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:22:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:22:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:22:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:22:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:22:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:22:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:22:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:22:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:22:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:22:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:22:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:22:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:22:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:22:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:22:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3356] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3372] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3379] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3447] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3470] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3473] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3586] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3614] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3633] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3637] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3638] Config: added 'scan_ssid' value '1'
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3639] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3640] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.3641] Config: added 'psk' value '<hidden>'
Oct 11 17:22:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/469
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.4518] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:22:31 IQ138000 NetworkManager[403]: <info>  [1760203351.4520] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:22:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:22:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:22:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:22:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17416 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:57 IQ138000 NetworkManager[403]: <warn>  [1760203377.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:22:57 IQ138000 NetworkManager[403]: <info>  [1760203377.0214] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:22:57 IQ138000 NetworkManager[403]: <warn>  [1760203377.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:22:57 IQ138000 NetworkManager[403]: <info>  [1760203377.0296] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:22:57 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:22:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/469
Oct 11 17:22:57 IQ138000 NetworkManager[403]: <info>  [1760203377.0731] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:22:57 IQ138000 NetworkManager[403]: <info>  [1760203377.0732] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:22:57 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:23:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:23:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:23:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:23:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:23:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:23:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:23:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:23:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:23:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:23:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:23:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:23:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:23:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:23:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:23:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:23:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:23:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:23:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:23:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:23:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:23:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:23:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:23:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:23:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:23:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:23:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:23:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:23:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:23:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:23:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:23:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:23:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:23:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:23:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:23:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:23:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:23:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:03 IQ138000 NetworkManager[403]: <info>  [1760203383.0934] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:23:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:23:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:23:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:23:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:23:21 IQ138000 wb-watchdog[25474]: [INFO] Interval #667 started. Waiting up to 60 seconds for error...
Oct 11 17:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:23:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:23:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:23:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:23:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:23:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:23:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:23:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:23:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:23:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:23:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:23:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:23:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:23:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:23:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:23:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:23:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:23:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:23:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:23:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:23:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:23:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:23:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:23:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:23:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:23:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:23:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:23:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:23:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:23:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:23:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:23:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:23:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:23:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:23:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:23:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:23:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:23:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:23:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:23:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:23:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2483] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2488] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2494] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2566] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2592] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2594] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2695] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2723] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2750] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2754] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2755] Config: added 'scan_ssid' value '1'
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2756] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2757] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:23:58 IQ138000 NetworkManager[403]: <info>  [1760203438.2758] Config: added 'psk' value '<hidden>'
Oct 11 17:23:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/470
Oct 11 17:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:24:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:24:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:24:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:24:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:24:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:24:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:24:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:24:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:24:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:24:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:24:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:24:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:24:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:24:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:24:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:24:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:24:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:24:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:24:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:24:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:24:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:24:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:24:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:24:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:24:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:24:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:24:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:24:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:24:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:24:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:24:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:24:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:24:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:24:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:24:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:24:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:02 IQ138000 NetworkManager[403]: <info>  [1760203442.3546] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:24:02 IQ138000 NetworkManager[403]: <info>  [1760203442.3548] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:21 IQ138000 wb-watchdog[26176]: [INFO] Interval #668 started. Waiting up to 60 seconds for error...
Oct 11 17:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:24 IQ138000 NetworkManager[403]: <warn>  [1760203464.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:24:24 IQ138000 NetworkManager[403]: <info>  [1760203464.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:24:24 IQ138000 NetworkManager[403]: <warn>  [1760203464.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:24:24 IQ138000 NetworkManager[403]: <info>  [1760203464.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:24:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/470
Oct 11 17:24:24 IQ138000 NetworkManager[403]: <info>  [1760203464.0724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:24:24 IQ138000 NetworkManager[403]: <info>  [1760203464.0727] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:24:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:29 IQ138000 NetworkManager[403]: <info>  [1760203469.9843] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:24:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:24:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:24:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:24:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:24:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:24:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:24:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:24:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:24:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:24:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:24:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:24:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:24:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:24:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:24:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:24:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:24:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:24:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:24:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:24:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:24:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:24:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:24:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:24:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:24:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:24:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:24:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:24:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:24:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:24:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:24:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:24:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:24:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:24:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:24:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:24:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:24:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:24:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:24:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:24:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:24:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:24:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:24:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:25:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:25:01 IQ138000 CRON[26544]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:25:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:25:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:25:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:25:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:25:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:25:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:25:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:25:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:25:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:25:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:25:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:25:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:25:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:25:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:25:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:25:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:25:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:25:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:25:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:25:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:25:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:25:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:25:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:25:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:25:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:25:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:25:01 IQ138000 CRON[26551]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 17:25:01 IQ138000 CRON[26544]: pam_unix(cron:session): session closed for user root
Oct 11 17:25:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:25:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:25:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:25:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:25:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:25:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:25:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:25:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:25:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:25:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:25:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:25:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:25:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:25:21 IQ138000 wb-watchdog[26799]: [INFO] Interval #669 started. Waiting up to 60 seconds for error...
Oct 11 17:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2401] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2410] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2417] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2495] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2535] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2555] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2697] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2734] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2750] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2754] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2756] Config: added 'scan_ssid' value '1'
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2756] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2758] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.2759] Config: added 'psk' value '<hidden>'
Oct 11 17:25:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/471
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.3500] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:25:25 IQ138000 NetworkManager[403]: <info>  [1760203525.3503] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:25:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:25:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:25:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:25:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:25:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:25:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:25:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:25:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:25:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:25:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:25:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:25:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:25:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:25:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:25:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:25:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:25:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:25:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:25:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:25:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:25:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:25:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:25:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:25:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:25:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:25:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:25:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:25:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:25:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:25:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:25:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:25:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:25:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:25:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:25:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:25:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:25:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:25:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:25:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:25:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 RP energy L1, row count 7183, limit 7042
Oct 11 17:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 17:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:51 IQ138000 NetworkManager[403]: <warn>  [1760203551.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:25:51 IQ138000 NetworkManager[403]: <info>  [1760203551.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:25:51 IQ138000 NetworkManager[403]: <warn>  [1760203551.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:25:51 IQ138000 NetworkManager[403]: <info>  [1760203551.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:25:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:25:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/471
Oct 11 17:25:51 IQ138000 NetworkManager[403]: <info>  [1760203551.0647] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:25:51 IQ138000 NetworkManager[403]: <info>  [1760203551.0651] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:25:51 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:56 IQ138000 NetworkManager[403]: <info>  [1760203556.9831] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:26:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:26:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:26:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:26:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:26:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:26:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:26:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:26:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:26:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:26:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:26:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:26:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:26:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:26:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:26:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:26:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:26:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:26:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:26:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:26:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:26:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:26:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:26:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:26:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:26:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:26:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:26:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:26:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:26:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:26:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:26:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:26:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:26:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:26:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:26:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:26:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:26:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:21 IQ138000 wb-watchdog[27497]: [INFO] Interval #670 started. Waiting up to 60 seconds for error...
Oct 11 17:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:26:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:26:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:26:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:26:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:26:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:26:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:26:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:26:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:26:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:26:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:26:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:26:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:26:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:26:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:26:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:26:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:26:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:26:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:26:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:26:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:26:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:26:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:26:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:26:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:26:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:26:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:26:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:26:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:26:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:26:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:26:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:26:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:26:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:26:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:26:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:26:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:26:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:26:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:26:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:26:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:38 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 17:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:26:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:26:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:26:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:26:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0204] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0209] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0215] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0407] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0443] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0445] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0571] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0601] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0622] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0625] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0626] Config: added 'scan_ssid' value '1'
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0627] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0628] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:26:52 IQ138000 NetworkManager[403]: <info>  [1760203612.0630] Config: added 'psk' value '<hidden>'
Oct 11 17:26:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/472
Oct 11 17:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:26:55 IQ138000 NetworkManager[403]: <info>  [1760203615.1416] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:26:55 IQ138000 NetworkManager[403]: <info>  [1760203615.1418] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:27:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:27:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:27:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:27:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:27:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:27:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:27:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:27:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:27:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:27:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:27:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:27:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:27:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:27:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:27:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:27:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:27:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:27:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:27:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:27:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:27:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:27:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:27:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:27:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:27:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:27:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:27:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:27:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:27:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:27:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:27:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:27:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:27:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:27:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:27:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:27:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:27:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:27:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:27:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:27:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:27:17 IQ138000 NetworkManager[403]: <warn>  [1760203637.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:27:17 IQ138000 NetworkManager[403]: <info>  [1760203637.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:27:17 IQ138000 NetworkManager[403]: <warn>  [1760203637.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:27:17 IQ138000 NetworkManager[403]: <info>  [1760203637.0300] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:27:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/472
Oct 11 17:27:17 IQ138000 NetworkManager[403]: <info>  [1760203637.0682] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:27:17 IQ138000 NetworkManager[403]: <info>  [1760203637.0684] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:21 IQ138000 wb-watchdog[28104]: [INFO] Interval #671 started. Waiting up to 60 seconds for error...
Oct 11 17:27:22 IQ138000 NetworkManager[403]: <info>  [1760203642.7780] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:27:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:27:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:27:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:27:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:27:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:27:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:27:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:27:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:27:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:27:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:27:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:27:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:27:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:27:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:27:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:27:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:27:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:27:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:27:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:27:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:27:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:27:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:27:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:27:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:27:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:27:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:27:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:27:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:27:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:27:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:27:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:27:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:27:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:27:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:27:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:27:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:27:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:27:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:27:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:27:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:28:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:28:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:28:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:28:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:28:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:28:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:28:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:28:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:28:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:28:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:28:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:28:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:28:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:28:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:28:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:28:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:28:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:28:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:28:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:28:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:28:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:28:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:28:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:28:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:28:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:28:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:28:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:28:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:28:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:28:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:28:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:28:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:28:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:28:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:28:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:28:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:28:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:28:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0657] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0661] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0668] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0760] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0779] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0780] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0877] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0897] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0915] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0918] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0919] Config: added 'scan_ssid' value '1'
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0920] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0921] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.0922] Config: added 'psk' value '<hidden>'
Oct 11 17:28:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/473
Oct 11 17:28:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.1654] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:28:18 IQ138000 NetworkManager[403]: <info>  [1760203698.1657] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:28:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:21 IQ138000 wb-watchdog[28812]: [INFO] Interval #672 started. Waiting up to 60 seconds for error...
Oct 11 17:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:28:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:28:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:28:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:28:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:28:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:28:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:28:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:28:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:28:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:28:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:28:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:28:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:28:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:28:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:28:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:28:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:28:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:28:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:28:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:28:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:28:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:28:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:28:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:28:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:28:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:28:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:28:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:28:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:28:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:28:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:28:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:28:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:28:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:28:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:28:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:28:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:28:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:28:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:43 IQ138000 NetworkManager[403]: <warn>  [1760203723.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:28:43 IQ138000 NetworkManager[403]: <info>  [1760203723.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:28:43 IQ138000 NetworkManager[403]: <warn>  [1760203723.0252] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:28:43 IQ138000 NetworkManager[403]: <info>  [1760203723.0271] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:28:43 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/473
Oct 11 17:28:43 IQ138000 NetworkManager[403]: <info>  [1760203723.0676] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:28:43 IQ138000 NetworkManager[403]: <info>  [1760203723.0690] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:28:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:28:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:28:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:28:48 IQ138000 NetworkManager[403]: <info>  [1760203728.8033] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:29:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:29:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:29:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:29:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:29:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:29:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:29:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:29:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:29:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:29:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:29:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:29:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:29:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:29:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:29:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:29:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:29:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:29:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:29:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:29:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:29:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:29:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:29:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:29:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:29:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:29:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:29:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:29:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:29:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:29:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:29:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:29:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:29:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:29:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:29:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:29:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:29:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:29:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:29:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:29:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:29:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:29:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:29:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:21 IQ138000 wb-watchdog[29429]: [INFO] Interval #673 started. Waiting up to 60 seconds for error...
Oct 11 17:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:29:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:29:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:29:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:29:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:29:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:29:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:29:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:29:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:29:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:29:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:29:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:29:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:29:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:29:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:29:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:29:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:29:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:29:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:29:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:29:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:29:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:29:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:29:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:29:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:29:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:29:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:29:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:29:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:29:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:29:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:29:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:29:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:29:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:29:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:29:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:29:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:29:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:29:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:29:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:29:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L1, row count 7183, limit 7042
Oct 11 17:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9624] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9628] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9634] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9736] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9754] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9756] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9864] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9918] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9945] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9959] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:29:43 IQ138000 NetworkManager[403]: <info>  [1760203783.9970] Config: added 'scan_ssid' value '1'
Oct 11 17:29:44 IQ138000 NetworkManager[403]: <info>  [1760203783.9999] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:29:44 IQ138000 NetworkManager[403]: <info>  [1760203784.0003] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:29:44 IQ138000 NetworkManager[403]: <info>  [1760203784.0005] Config: added 'psk' value '<hidden>'
Oct 11 17:29:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/474
Oct 11 17:29:44 IQ138000 NetworkManager[403]: <info>  [1760203784.0762] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:29:44 IQ138000 NetworkManager[403]: <info>  [1760203784.0764] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:29:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:29:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:29:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:30:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:30:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:30:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:30:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:30:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:30:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:30:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:30:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:30:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:30:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:30:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:30:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:30:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:30:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:30:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:30:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:30:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:30:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:30:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:30:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:30:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:30:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:30:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:30:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:30:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:30:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:30:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:30:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:30:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:30:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:30:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:30:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:30:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:30:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:30:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:30:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:09 IQ138000 NetworkManager[403]: <warn>  [1760203809.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:30:09 IQ138000 NetworkManager[403]: <info>  [1760203809.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:30:09 IQ138000 NetworkManager[403]: <warn>  [1760203809.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:30:09 IQ138000 NetworkManager[403]: <info>  [1760203809.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:30:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/474
Oct 11 17:30:09 IQ138000 NetworkManager[403]: <info>  [1760203809.0721] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:30:09 IQ138000 NetworkManager[403]: <info>  [1760203809.0731] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:14 IQ138000 NetworkManager[403]: <info>  [1760203814.7262] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:30:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12860 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:30:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:30:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:30:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:30:22 IQ138000 wb-watchdog[30130]: [INFO] Interval #674 started. Waiting up to 60 seconds for error...
Oct 11 17:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:30:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:30:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:30:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:30:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:30:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:30:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:30:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:30:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:30:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:30:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:30:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:30:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:30:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:30:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:30:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:30:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:30:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:30:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:30:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:30:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:30:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:30:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:30:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:30:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:30:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:30:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:30:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:30:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:30:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:30:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:30:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:30:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:30:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:30:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:30:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:30:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:30:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:30:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:30:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:30:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:30:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:30:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:30:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:30:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:30:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:30:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:30:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:31:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:31:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:31:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:31:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:31:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:31:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:31:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:31:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:31:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:31:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:31:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:31:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:31:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:31:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:31:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:31:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:31:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:31:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:31:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:31:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:31:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:31:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:31:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:31:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:31:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:31:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:31:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:31:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:31:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:31:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:31:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:31:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:31:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:31:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12836 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8495] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8500] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8506] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8559] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8577] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8578] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8658] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8677] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8693] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8696] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8697] Config: added 'scan_ssid' value '1'
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8699] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8700] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.8701] Config: added 'psk' value '<hidden>'
Oct 11 17:31:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/475
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.9437] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:31:09 IQ138000 NetworkManager[403]: <info>  [1760203869.9439] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:31:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:31:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:31:22 IQ138000 wb-watchdog[30761]: [INFO] Interval #675 started. Waiting up to 60 seconds for error...
Oct 11 17:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:31:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:31:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:31:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:31:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:31:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:31:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:31:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:31:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:31:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:31:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:31:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:31:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:31:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:31:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:31:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:31:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:31:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:31:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:31:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:31:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:31:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:31:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:31:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:31:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:31:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:31:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:31:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:31:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:31:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:31:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:31:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:31:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:31:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:31:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:31:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:31:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:31:35 IQ138000 NetworkManager[403]: <warn>  [1760203895.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:31:35 IQ138000 NetworkManager[403]: <info>  [1760203895.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:31:35 IQ138000 NetworkManager[403]: <warn>  [1760203895.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:31:35 IQ138000 NetworkManager[403]: <info>  [1760203895.0252] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:31:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/475
Oct 11 17:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:31:35 IQ138000 NetworkManager[403]: <info>  [1760203895.0645] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:31:35 IQ138000 NetworkManager[403]: <info>  [1760203895.0648] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:31:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:31:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:31:41 IQ138000 NetworkManager[403]: <info>  [1760203901.6113] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:31:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:47 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:31:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:32:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:32:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:32:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:32:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:32:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:32:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:32:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:32:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:32:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:32:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:32:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:32:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:32:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:32:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:32:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:32:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:32:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:32:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:32:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:32:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:32:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:32:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:32:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:32:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:32:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:32:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:32:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:32:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:32:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:32:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:32:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:32:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:32:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:32:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:32:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:32:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:32:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:32:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:32:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 5134 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:32:22 IQ138000 wb-watchdog[31442]: [INFO] Interval #676 started. Waiting up to 60 seconds for error...
Oct 11 17:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:32:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:32:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:32:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:32:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:32:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:32:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:32:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:32:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:32:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:32:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:32:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:32:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:32:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:32:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:32:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:32:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:32:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:32:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:32:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:32:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:32:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:32:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:32:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:32:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:32:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:32:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:32:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:32:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:32:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:32:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:32:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:32:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:32:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:32:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:32:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:32:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7451] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7462] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7469] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7529] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7559] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7561] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7658] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7679] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7709] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7712] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7714] Config: added 'scan_ssid' value '1'
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7714] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7716] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.7717] Config: added 'psk' value '<hidden>'
Oct 11 17:32:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/476
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.8425] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:32:36 IQ138000 NetworkManager[403]: <info>  [1760203956.8431] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:37 IQ138000 npm[3801]: [2025-10-11 17:32:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.12,"last_seen":1760203957720,"linkquality":51,"power_outage_count":25795,"pressure":991.7,"temperature":22.94,"voltage":2995}'
Oct 11 17:32:37 IQ138000 npm[3801]: [2025-10-11 17:32:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.27,"last_seen":1760203957733,"linkquality":65,"power_outage_count":25795,"pressure":991.7,"temperature":22.94,"voltage":2995}'
Oct 11 17:32:37 IQ138000 npm[3801]: [2025-10-11 17:32:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.27,"last_seen":1760203957733,"linkquality":65,"power_outage_count":25795,"pressure":991.4,"temperature":22.94,"voltage":2995}'
Oct 11 17:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:32:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:02 IQ138000 NetworkManager[403]: <warn>  [1760203982.0207] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:33:02 IQ138000 NetworkManager[403]: <info>  [1760203982.0209] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:33:02 IQ138000 NetworkManager[403]: <warn>  [1760203982.0239] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:33:02 IQ138000 NetworkManager[403]: <info>  [1760203982.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:33:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/476
Oct 11 17:33:02 IQ138000 NetworkManager[403]: <info>  [1760203982.0688] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:33:02 IQ138000 NetworkManager[403]: <info>  [1760203982.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:33:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:33:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:33:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:33:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:33:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:33:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:33:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:33:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:33:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:33:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:33:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:33:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:33:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:33:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:33:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:33:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:33:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:33:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:33:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:33:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:33:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:33:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:33:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:33:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:33:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:33:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:33:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:33:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:33:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:33:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:33:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:33:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:33:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:33:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:33:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:33:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:33:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:33:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:33:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:33:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:08 IQ138000 NetworkManager[403]: <info>  [1760203988.4789] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:33:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5132 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:33:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:33:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:33:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:33:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:22 IQ138000 wb-watchdog[32076]: [INFO] Interval #677 started. Waiting up to 60 seconds for error...
Oct 11 17:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:33:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:33:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:33:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:33:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:33:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:33:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:33:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:33:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:33:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:33:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:33:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:33:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:33:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:33:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:33:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:33:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:33:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:33:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:33:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:33:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:33:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:33:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:33:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:33:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:33:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:33:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:33:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:33:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:33:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:33:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:33:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:33:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:33:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:33:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:33:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:33:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:33:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:33:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:33:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:33:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5590] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5596] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5603] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5694] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5728] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5730] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5824] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5849] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5881] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5884] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5886] Config: added 'scan_ssid' value '1'
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5886] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5888] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.5888] Config: added 'psk' value '<hidden>'
Oct 11 17:34:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/477
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.6642] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:34:03 IQ138000 NetworkManager[403]: <info>  [1760204043.6644] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:34:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:34:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:34:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:34:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:34:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:34:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:34:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:34:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:34:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:34:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:34:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:34:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:34:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:34:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:34:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:34:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:34:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:34:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:34:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:34:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:34:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:34:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:34:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:34:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:34:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:34:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:34:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:34:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:34:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:34:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:34:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:34:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:34:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:34:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:34:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:34:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:34:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:34:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:22 IQ138000 wb-watchdog[310]: [INFO] Interval #678 started. Waiting up to 60 seconds for error...
Oct 11 17:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:29 IQ138000 NetworkManager[403]: <warn>  [1760204069.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:34:29 IQ138000 NetworkManager[403]: <info>  [1760204069.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:34:29 IQ138000 NetworkManager[403]: <warn>  [1760204069.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:34:29 IQ138000 NetworkManager[403]: <info>  [1760204069.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:34:29 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:34:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/477
Oct 11 17:34:29 IQ138000 NetworkManager[403]: <info>  [1760204069.0724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:34:29 IQ138000 NetworkManager[403]: <info>  [1760204069.0726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:29 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:34:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:34:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:35 IQ138000 NetworkManager[403]: <info>  [1760204075.2947] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:34:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:34:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:34:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:34:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:34:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:34:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:34:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:34:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:34:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:34:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:34:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:34:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:34:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:34:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:34:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:34:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:34:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:34:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:34:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:34:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:34:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:34:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:34:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:34:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:34:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:34:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:34:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:34:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:34:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:34:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:34:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:34:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:34:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:34:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:34:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:34:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:01 IQ138000 CRON[672]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:35:01 IQ138000 CRON[676]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 17:35:01 IQ138000 CRON[672]: pam_unix(cron:session): session closed for user root
Oct 11 17:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:35:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:35:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:35:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:35:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:35:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:35:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:35:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:35:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:35:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:35:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:35:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:35:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:35:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:35:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:35:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:35:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:35:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:35:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:35:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:35:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:35:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:35:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:35:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:35:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:35:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:35:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:35:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:35:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:35:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:35:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:35:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:35:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:35:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:35:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:35:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:35:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 13066 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:35:19 IQ138000 npm[3801]: [2025-10-11 17:35:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.27,"last_seen":1760204119671,"linkquality":21,"power_outage_count":25795,"pressure":991.4,"temperature":22.91,"voltage":2995}'
Oct 11 17:35:19 IQ138000 npm[3801]: [2025-10-11 17:35:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.51,"last_seen":1760204119693,"linkquality":25,"power_outage_count":25795,"pressure":991.4,"temperature":22.91,"voltage":2995}'
Oct 11 17:35:19 IQ138000 npm[3801]: [2025-10-11 17:35:19] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.51,"last_seen":1760204119693,"linkquality":25,"power_outage_count":25795,"pressure":991.7,"temperature":22.91,"voltage":2995}'
Oct 11 17:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:35:22 IQ138000 wb-watchdog[933]: [INFO] Interval #679 started. Waiting up to 60 seconds for error...
Oct 11 17:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:35:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:35:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3381] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3388] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3405] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3586] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3631] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3635] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3732] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3754] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3774] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3777] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3778] Config: added 'scan_ssid' value '1'
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3778] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3782] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:35:30 IQ138000 NetworkManager[403]: <info>  [1760204130.3784] Config: added 'psk' value '<hidden>'
Oct 11 17:35:30 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/478
Oct 11 17:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:33 IQ138000 NetworkManager[403]: <info>  [1760204133.4808] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:35:33 IQ138000 NetworkManager[403]: <info>  [1760204133.4810] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:35:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:35:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:35:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:35:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:35:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:35:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:35:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:35:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:35:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:35:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:35:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:35:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:35:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:35:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:35:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:35:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:35:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:35:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:35:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:35:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:35:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:35:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:35:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:35:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:35:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:35:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:35:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:35:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:35:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:35:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:35:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:35:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:35:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:35:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:35:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:35:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:35:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:35:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:56 IQ138000 NetworkManager[403]: <warn>  [1760204156.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:35:56 IQ138000 NetworkManager[403]: <info>  [1760204156.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:35:56 IQ138000 NetworkManager[403]: <warn>  [1760204156.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:35:56 IQ138000 NetworkManager[403]: <info>  [1760204156.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:35:56 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/478
Oct 11 17:35:56 IQ138000 NetworkManager[403]: <info>  [1760204156.0640] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:35:56 IQ138000 NetworkManager[403]: <info>  [1760204156.0642] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:02 IQ138000 NetworkManager[403]: <info>  [1760204162.0873] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:36:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:36:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:36:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:36:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:36:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:36:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:36:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:36:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:36:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:36:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:36:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:36:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:36:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:36:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:36:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:36:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:36:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:36:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:36:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:36:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:36:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:36:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:36:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:36:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:36:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:36:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:36:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:36:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:36:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:36:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:36:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:36:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:36:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:36:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:36:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:36:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:36:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:36:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17156 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:36:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 17:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:22 IQ138000 wb-watchdog[1661]: [INFO] Interval #680 started. Waiting up to 60 seconds for error...
Oct 11 17:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:36:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:36:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:36:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:36:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:36:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:36:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:36:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:36:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:36:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:36:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:36:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:36:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:36:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:36:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:36:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:36:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:36:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:36:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:36:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:36:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:36:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:36:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:36:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:36:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:36:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:36:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:36:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:36:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:36:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:36:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:36:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:36:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:36:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:36:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:36:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:36:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:36:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:36:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:36:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:42 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 17:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:36:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L1, row count 7183, limit 7042
Oct 11 17:36:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-m1w2_16/External Sensor 1, row count 7183, limit 7042
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2779] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2784] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2799] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2859] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2878] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2880] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.2994] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3015] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3033] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3037] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3038] Config: added 'scan_ssid' value '1'
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3039] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3041] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3042] Config: added 'psk' value '<hidden>'
Oct 11 17:36:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/479
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3807] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:36:57 IQ138000 NetworkManager[403]: <info>  [1760204217.3809] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:36:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:36:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:37:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:37:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:37:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:37:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:37:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:37:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:37:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:37:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:37:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:37:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:37:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:37:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:37:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:37:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:37:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:37:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:37:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:37:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:37:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:37:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:37:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:37:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:37:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:37:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:37:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:37:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:37:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:37:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:37:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:37:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:37:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:37:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:37:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:37:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:37:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:37:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:11 IQ138000 npm[3801]: [2025-10-11 17:37:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.51,"last_seen":1760204231104,"linkquality":47,"power_outage_count":25795,"pressure":991.7,"temperature":22.89,"voltage":2995}'
Oct 11 17:37:11 IQ138000 npm[3801]: [2025-10-11 17:37:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.55,"last_seen":1760204231121,"linkquality":47,"power_outage_count":25795,"pressure":991.7,"temperature":22.89,"voltage":2995}'
Oct 11 17:37:11 IQ138000 npm[3801]: [2025-10-11 17:37:11] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.55,"last_seen":1760204231121,"linkquality":47,"power_outage_count":25795,"pressure":991.4,"temperature":22.89,"voltage":2995}'
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:37:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:37:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:37:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:22 IQ138000 wb-watchdog[2320]: [INFO] Interval #681 started. Waiting up to 60 seconds for error...
Oct 11 17:37:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:23 IQ138000 NetworkManager[403]: <warn>  [1760204243.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:37:23 IQ138000 NetworkManager[403]: <info>  [1760204243.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:37:23 IQ138000 NetworkManager[403]: <warn>  [1760204243.0245] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:37:23 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:37:23 IQ138000 NetworkManager[403]: <info>  [1760204243.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:37:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/479
Oct 11 17:37:23 IQ138000 NetworkManager[403]: <info>  [1760204243.0786] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:37:23 IQ138000 NetworkManager[403]: <info>  [1760204243.0788] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:23 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:37:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:29 IQ138000 NetworkManager[403]: <info>  [1760204249.0794] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:37:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:37:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:37:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:37:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:37:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:37:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:37:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:37:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:37:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:37:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:37:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:37:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:37:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:37:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:37:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:37:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:37:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:37:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:37:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:37:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:37:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:37:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:37:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:37:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:37:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:37:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:37:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:37:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:37:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:37:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:37:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:37:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:37:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:37:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:37:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:37:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:37:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:37:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:37:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:37:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:37:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:37:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:01 IQ138000 CRON[2790]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:38:01 IQ138000 CRON[2795]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 17:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:03 IQ138000 sSMTP[2814]: Unable to locate mail
Oct 11 17:38:03 IQ138000 cron[2814]: sendmail: Cannot open mail:25
Oct 11 17:38:03 IQ138000 sSMTP[2814]: Cannot open mail:25
Oct 11 17:38:03 IQ138000 CRON[2790]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                     )
Oct 11 17:38:03 IQ138000 CRON[2790]: pam_unix(cron:session): session closed for user root
Oct 11 17:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:38:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:38:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:38:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:38:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:38:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:38:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:38:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:38:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:38:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:38:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:38:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:38:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:38:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:38:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:38:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:38:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:38:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:38:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:38:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:38:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:38:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:38:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:38:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:38:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:38:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:38:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:38:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:38:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:38:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:38:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:38:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:38:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:38:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:38:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:38:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:38:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:38:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:38:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:38:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:38:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:38:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:38:22 IQ138000 npm[3801]: [2025-10-11 17:38:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.55,"last_seen":1760204302132,"linkquality":65,"power_outage_count":25795,"pressure":991.4,"temperature":22.9,"voltage":2995}'
Oct 11 17:38:22 IQ138000 npm[3801]: [2025-10-11 17:38:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.04,"last_seen":1760204302144,"linkquality":69,"power_outage_count":25795,"pressure":991.4,"temperature":22.9,"voltage":2995}'
Oct 11 17:38:22 IQ138000 npm[3801]: [2025-10-11 17:38:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.04,"last_seen":1760204302171,"linkquality":69,"power_outage_count":25795,"pressure":991.7,"temperature":22.9,"voltage":2995}'
Oct 11 17:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:22 IQ138000 wb-watchdog[3050]: [INFO] Interval #682 started. Waiting up to 60 seconds for error...
Oct 11 17:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:38:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3406] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3433] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3446] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3539] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3569] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3571] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3755] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3791] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3852] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3856] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3858] Config: added 'scan_ssid' value '1'
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3859] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3860] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:38:24 IQ138000 NetworkManager[403]: <info>  [1760204304.3861] Config: added 'psk' value '<hidden>'
Oct 11 17:38:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/480
Oct 11 17:38:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:28 IQ138000 NetworkManager[403]: <info>  [1760204308.4797] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:38:28 IQ138000 NetworkManager[403]: <info>  [1760204308.4802] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:38:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:38:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:38:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:38:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:38:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:38:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:38:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:38:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:38:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:38:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:38:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:38:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:38:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:38:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:38:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:38:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:38:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:38:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:38:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:38:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:38:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:38:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:38:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:38:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:38:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:38:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:38:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:38:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:38:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:38:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:38:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:38:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:38:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:38:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:38:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:38:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:38:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:38:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:38:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:38:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:38:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:50 IQ138000 NetworkManager[403]: <warn>  [1760204330.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:38:50 IQ138000 NetworkManager[403]: <info>  [1760204330.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:38:50 IQ138000 NetworkManager[403]: <warn>  [1760204330.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:38:50 IQ138000 NetworkManager[403]: <info>  [1760204330.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:38:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/480
Oct 11 17:38:50 IQ138000 NetworkManager[403]: <info>  [1760204330.0651] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:38:50 IQ138000 NetworkManager[403]: <info>  [1760204330.0653] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:56 IQ138000 NetworkManager[403]: <info>  [1760204336.1426] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:38:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L3, row count 7183, limit 7042
Oct 11 17:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:39:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:39:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:39:07 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:39:07 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:39:07 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:39:07 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:39:07 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:39:07 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:39:07 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:39:07 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:39:07 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:39:07 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:39:07 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:39:07 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:39:07 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:39:07 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:39:07 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:39:07 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:39:07 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:39:07 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:39:07 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:39:07 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:39:07 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:39:07 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:39:07 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:39:07 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:39:07 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:39:07 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:39:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:39:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:39:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:39:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:39:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:39:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:39:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:39:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:39:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:39:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:39:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:22 IQ138000 wb-watchdog[3715]: [INFO] Interval #683 started. Waiting up to 60 seconds for error...
Oct 11 17:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:39:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:39:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:39:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:39:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:39:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:39:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:39:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:39:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:39:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:39:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:39:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:39:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:39:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:39:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:39:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:39:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:39:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:39:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:39:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:39:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:39:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:39:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:39:37 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:39:37 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:39:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:39:37 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:39:37 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:39:37 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:39:37 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:39:37 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:39:37 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:39:37 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:39:37 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:39:37 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:39:37 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:39:37 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:39:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.3968] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.3972] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.3978] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4135] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4155] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4157] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4286] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4347] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4381] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4385] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4387] Config: added 'scan_ssid' value '1'
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4388] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4390] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:39:51 IQ138000 NetworkManager[403]: <info>  [1760204391.4391] Config: added 'psk' value '<hidden>'
Oct 11 17:39:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/481
Oct 11 17:39:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:53 IQ138000 NetworkManager[403]: <info>  [1760204393.5477] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:39:53 IQ138000 NetworkManager[403]: <info>  [1760204393.5479] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:39:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:07 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:40:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:40:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:40:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:40:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:40:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:40:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:40:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:40:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:40:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:40:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:40:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:40:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:40:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:40:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:40:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:40:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:40:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:40:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:40:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:40:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:40:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:40:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:40:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:40:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:40:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:40:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:40:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:40:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:40:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:40:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:40:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:40:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:40:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:40:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:40:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:40:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:17 IQ138000 NetworkManager[403]: <warn>  [1760204417.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:40:17 IQ138000 NetworkManager[403]: <info>  [1760204417.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:40:17 IQ138000 NetworkManager[403]: <warn>  [1760204417.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:40:17 IQ138000 NetworkManager[403]: <info>  [1760204417.0289] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:40:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/481
Oct 11 17:40:17 IQ138000 NetworkManager[403]: <info>  [1760204417.0692] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:40:17 IQ138000 NetworkManager[403]: <info>  [1760204417.0694] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:40:22 IQ138000 wb-watchdog[4410]: [INFO] Interval #684 started. Waiting up to 60 seconds for error...
Oct 11 17:40:23 IQ138000 NetworkManager[403]: <info>  [1760204423.1268] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:40:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:40:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:40:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:40:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:40:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:40:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:40:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:40:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:40:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:40:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:40:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:40:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:40:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:40:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:40:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:40:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:40:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:40:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:40:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:40:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:40:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:40:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:40:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:40:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:40:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:40:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:40:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:40:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:40:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:40:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:40:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:40:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:40:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:40:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:40:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:40:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:40:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:40:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:40:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:40:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:40:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:40:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 5144 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:41:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:41:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:41:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:41:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:41:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:41:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:41:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:41:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:41:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:41:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:41:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:41:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:41:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:41:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:41:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:41:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:41:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:41:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:41:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:41:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:41:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:41:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:41:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:41:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:41:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:41:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:41:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:41:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:41:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:41:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:41:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:41:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:41:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:41:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:41:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:41:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:41:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:41:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.2894] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.2899] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.2906] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.2972] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.2990] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.2991] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3076] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3100] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3117] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3120] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3121] Config: added 'scan_ssid' value '1'
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3122] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3123] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3124] Config: added 'psk' value '<hidden>'
Oct 11 17:41:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/482
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3827] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:41:18 IQ138000 NetworkManager[403]: <info>  [1760204478.3829] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:41:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:41:22 IQ138000 wb-watchdog[5044]: [INFO] Interval #685 started. Waiting up to 60 seconds for error...
Oct 11 17:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:41:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:41:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:41:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:41:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 RP energy L3, row count 7183, limit 7042
Oct 11 17:41:38 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:41:38 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:41:38 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:41:38 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:41:38 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:41:38 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:41:38 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:41:38 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:41:38 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:41:38 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:41:38 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:41:38 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:41:38 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:41:38 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:41:38 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:41:38 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:41:38 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:41:38 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:41:38 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:41:38 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:41:38 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:41:38 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:41:38 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:41:38 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:41:38 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:41:38 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:41:38 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:41:38 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:41:38 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:41:38 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:41:38 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:41:38 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:41:38 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:41:38 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:41:38 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:41:38 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:41:38 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:41:44 IQ138000 NetworkManager[403]: <warn>  [1760204504.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:41:44 IQ138000 NetworkManager[403]: <info>  [1760204504.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:41:44 IQ138000 NetworkManager[403]: <warn>  [1760204504.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:41:44 IQ138000 NetworkManager[403]: <info>  [1760204504.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:41:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/482
Oct 11 17:41:44 IQ138000 NetworkManager[403]: <info>  [1760204504.0726] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:41:44 IQ138000 NetworkManager[403]: <info>  [1760204504.0728] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:41:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:49 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:41:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:41:50 IQ138000 NetworkManager[403]: <info>  [1760204510.0541] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:41:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:41:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:41:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:42:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:08 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:42:08 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:42:08 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:42:08 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:42:08 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:42:08 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:42:08 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:42:08 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:42:08 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:42:08 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:42:08 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:42:08 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:42:08 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:42:08 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:42:08 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:42:08 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:42:08 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:42:08 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:42:08 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:42:08 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:42:08 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:42:08 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:42:08 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:42:08 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:42:08 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:42:08 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:42:08 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:08 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:42:08 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:42:08 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:42:08 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:42:08 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:42:08 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:42:08 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:42:08 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:42:08 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:42:08 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:42:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:42:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:22 IQ138000 wb-watchdog[5769]: [INFO] Interval #686 started. Waiting up to 60 seconds for error...
Oct 11 17:42:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:42:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:42:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:42:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:42:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:42:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:42:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:42:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:42:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:42:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:42:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:42:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:42:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:42:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:42:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:42:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:42:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:42:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:42:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:42:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:42:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:42:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:42:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:42:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:42:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:42:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:42:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:42:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:42:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:42:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:42:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:42:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:42:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:42:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:42:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:42:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:42:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:42:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:42:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:42:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:42:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5029] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5034] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5040] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5158] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5185] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5187] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5281] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5300] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5317] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5320] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5321] Config: added 'scan_ssid' value '1'
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5322] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5323] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.5323] Config: added 'psk' value '<hidden>'
Oct 11 17:42:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/483
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.6186] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:42:45 IQ138000 NetworkManager[403]: <info>  [1760204565.6188] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:42:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 AP energy L1, row count 7183, limit 7042
Oct 11 17:42:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:42:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:43:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:43:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:43:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:43:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:43:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:43:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:43:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:43:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:43:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:43:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:43:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:43:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:43:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:43:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:43:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:43:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:43:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:43:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:43:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:43:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:43:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:43:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:43:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:43:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:43:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:43:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:43:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:43:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:43:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:43:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:43:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:43:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:43:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:43:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:43:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:43:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:43:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:11 IQ138000 NetworkManager[403]: <warn>  [1760204591.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:43:11 IQ138000 NetworkManager[403]: <info>  [1760204591.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:43:11 IQ138000 NetworkManager[403]: <warn>  [1760204591.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:43:11 IQ138000 NetworkManager[403]: <info>  [1760204591.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:43:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/483
Oct 11 17:43:11 IQ138000 NetworkManager[403]: <info>  [1760204591.0758] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:43:11 IQ138000 NetworkManager[403]: <info>  [1760204591.0767] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:43:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:43:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:43:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:17 IQ138000 NetworkManager[403]: <info>  [1760204597.2448] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:43:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:43:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:43:22 IQ138000 wb-watchdog[6409]: [INFO] Interval #687 started. Waiting up to 60 seconds for error...
Oct 11 17:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:43:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:43:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:43:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:43:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:43:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:43:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:43:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:43:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:43:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:43:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:43:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:43:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:43:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:43:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:43:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:43:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:43:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:43:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:43:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:43:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:43:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:43:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:43:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:43:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:43:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:43:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:43:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:43:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:43:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:43:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:43:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:43:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:43:39 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:43:39 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:43:39 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:43:39 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:43:39 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:43:39 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:43:39 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:43:39 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:43:39 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:43:39 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:43:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:43:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:44:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:44:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:44:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:09 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:44:09 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:44:09 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:44:09 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:44:09 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:44:09 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:44:09 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:44:09 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:44:09 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:44:09 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:44:09 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:44:09 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:44:09 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:44:09 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:44:09 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:44:09 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:44:09 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:44:09 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:44:09 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:44:09 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:44:09 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:44:09 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:44:09 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:44:09 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:44:09 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:44:09 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:44:09 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:44:09 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:44:09 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:44:09 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:44:09 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:44:09 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:44:09 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:44:09 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:44:09 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:44:09 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:44:09 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6344] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6348] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6354] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6523] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6602] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6607] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6725] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6755] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6772] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6776] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6777] Config: added 'scan_ssid' value '1'
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6778] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6779] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.6779] Config: added 'psk' value '<hidden>'
Oct 11 17:44:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/484
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.7665] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:44:12 IQ138000 NetworkManager[403]: <info>  [1760204652.7667] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:44:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:44:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:44:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:22 IQ138000 wb-watchdog[7096]: [INFO] Interval #688 started. Waiting up to 60 seconds for error...
Oct 11 17:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 10002 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4886 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:38 IQ138000 NetworkManager[403]: <warn>  [1760204678.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:44:38 IQ138000 NetworkManager[403]: <info>  [1760204678.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:44:38 IQ138000 NetworkManager[403]: <warn>  [1760204678.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:44:38 IQ138000 NetworkManager[403]: <info>  [1760204678.0259] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:44:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/484
Oct 11 17:44:38 IQ138000 NetworkManager[403]: <info>  [1760204678.0650] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:44:38 IQ138000 NetworkManager[403]: <info>  [1760204678.0652] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:44:39 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:44:39 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:44:39 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:44:39 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:44:39 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:44:39 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:44:39 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:44:39 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:44:39 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:44:39 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:44:39 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:44:39 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:44:39 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:44:39 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:44:39 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:44:39 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:44:39 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:44:39 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:44:39 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:44:39 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:44:39 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:44:39 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:44:39 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:44:39 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:44:39 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:44:39 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:44:39 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:44:39 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:44:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:44:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:44:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:44:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:44:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:44:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:44:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:44:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:44:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:44:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:44:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:44:44 IQ138000 NetworkManager[403]: <info>  [1760204684.3896] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:44:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:44:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:44:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:44:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:44:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:44:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8966 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:01 IQ138000 CRON[7460]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:45:01 IQ138000 CRON[7464]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 17:45:01 IQ138000 CRON[7460]: pam_unix(cron:session): session closed for user root
Oct 11 17:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:45:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:45:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:45:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:45:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:45:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:45:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:45:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:45:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:45:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:45:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:45:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:45:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:45:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:45:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:45:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:45:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:45:10 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:45:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:45:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:45:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:45:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:45:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:45:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:45:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:45:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:45:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:45:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:45:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:45:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:45:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:45:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:45:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:45:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:45:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:45:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:45:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:45:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:45:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:22 IQ138000 wb-watchdog[7734]: [INFO] Interval #689 started. Waiting up to 60 seconds for error...
Oct 11 17:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:45:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3573] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3586] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3593] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3651] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3669] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3671] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3770] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3791] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3807] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3810] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3811] Config: added 'scan_ssid' value '1'
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3812] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3813] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.3815] Config: added 'psk' value '<hidden>'
Oct 11 17:45:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/485
Oct 11 17:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.4830] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:45:39 IQ138000 NetworkManager[403]: <info>  [1760204739.4832] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:45:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:45:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:45:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:45:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:45:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:45:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:45:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:45:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:45:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:45:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:45:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:45:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:45:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:45:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:45:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:45:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:45:40 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:45:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:45:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:45:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:45:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:45:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:45:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:45:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:45:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:45:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:45:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:45:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:45:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:45:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:45:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:45:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:45:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:45:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:45:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:45:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:45:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:45:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:45:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:46:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:05 IQ138000 NetworkManager[403]: <warn>  [1760204765.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:46:05 IQ138000 NetworkManager[403]: <info>  [1760204765.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:46:05 IQ138000 NetworkManager[403]: <warn>  [1760204765.0242] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:46:05 IQ138000 NetworkManager[403]: <info>  [1760204765.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:46:05 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:46:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/485
Oct 11 17:46:05 IQ138000 NetworkManager[403]: <info>  [1760204765.0923] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:46:05 IQ138000 NetworkManager[403]: <info>  [1760204765.0925] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:05 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:46:10 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:46:10 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:46:10 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:46:10 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:46:10 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:46:10 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:46:10 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:46:10 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:46:10 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:46:10 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:46:10 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:46:10 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:46:10 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:46:10 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:46:10 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:46:10 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:46:10 IQ138000 python3[2000]:            |       signal quality: 80% (recent)
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:46:10 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:46:10 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:46:10 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:46:10 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:46:10 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:46:10 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:46:10 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:46:10 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:46:10 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:10 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:46:10 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:46:10 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:46:10 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:46:10 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:46:10 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:46:10 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:46:10 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:46:10 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:46:10 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:46:11 IQ138000 NetworkManager[403]: <info>  [1760204771.2048] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 17:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:46:22 IQ138000 wb-watchdog[8430]: [INFO] Interval #690 started. Waiting up to 60 seconds for error...
Oct 11 17:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:46:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:46:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:46:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:46:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:40 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:46:40 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:46:40 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:46:40 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:46:40 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:46:40 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:46:40 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:46:40 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:46:40 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:46:40 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:46:40 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:46:40 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:46:40 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:46:40 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:46:40 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:46:40 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:46:40 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:46:40 IQ138000 python3[2000]:            |       signal quality: 83% (recent)
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:46:40 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:46:40 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:46:40 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:46:40 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:46:40 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:46:40 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:46:40 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:46:40 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:46:40 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:46:40 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:46:40 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:46:40 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:46:40 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:46:40 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:46:40 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:46:40 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:46:40 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:46:40 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:46:40 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:46:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:46:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:47 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 17:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:46:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:46:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:46:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:47:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:47:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.3747] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.3752] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.3759] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.3869] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.3910] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.3912] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4082] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4119] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4170] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4184] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4196] Config: added 'scan_ssid' value '1'
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4199] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4200] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:47:06 IQ138000 NetworkManager[403]: <info>  [1760204826.4201] Config: added 'psk' value '<hidden>'
Oct 11 17:47:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/486
Oct 11 17:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:08 IQ138000 NetworkManager[403]: <info>  [1760204828.4975] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:47:08 IQ138000 NetworkManager[403]: <info>  [1760204828.4986] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:10 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:47:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:47:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:47:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:47:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:47:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:47:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:47:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:47:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:47:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:47:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:47:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:47:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:47:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:47:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:47:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:47:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:47:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:47:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:47:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:47:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:47:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:47:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:47:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:47:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:47:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:47:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:47:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:47:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:47:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:47:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:47:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:47:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:47:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:47:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:47:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:47:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:47:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:23 IQ138000 wb-watchdog[9050]: [INFO] Interval #691 started. Waiting up to 60 seconds for error...
Oct 11 17:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:32 IQ138000 NetworkManager[403]: <warn>  [1760204852.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:47:32 IQ138000 NetworkManager[403]: <info>  [1760204852.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:47:32 IQ138000 NetworkManager[403]: <warn>  [1760204852.0275] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:47:32 IQ138000 NetworkManager[403]: <info>  [1760204852.0292] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:47:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/486
Oct 11 17:47:32 IQ138000 NetworkManager[403]: <info>  [1760204852.0760] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:47:32 IQ138000 NetworkManager[403]: <info>  [1760204852.0762] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:47:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:47:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L2, row count 7183, limit 7042
Oct 11 17:47:38 IQ138000 NetworkManager[403]: <info>  [1760204858.1196] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:47:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:47:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:47:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:47:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:47:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:47:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:47:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:47:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:47:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:47:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:47:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:47:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:47:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:47:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:47:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:47:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:47:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:47:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:47:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:47:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:47:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:47:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:47:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:47:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:47:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:47:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:47:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:47:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:47:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:47:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:47:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:47:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:47:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:47:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:47:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:47:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:47:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:47:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:47:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:47:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16573 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:48:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:48:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:48:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:48:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:48:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:48:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:48:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:48:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:48:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:48:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:48:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:48:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:48:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:48:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:48:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:48:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:48:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:48:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:48:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:48:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:48:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:48:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:48:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:48:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:48:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:48:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:48:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:48:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:48:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:48:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:48:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:48:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:48:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:48:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:48:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:48:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:48:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:48:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:23 IQ138000 wb-watchdog[9765]: [INFO] Interval #692 started. Waiting up to 60 seconds for error...
Oct 11 17:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 17:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3046] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3051] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3057] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3111] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3130] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3132] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3256] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3277] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3297] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3302] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3303] Config: added 'scan_ssid' value '1'
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3304] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3306] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.3307] Config: added 'psk' value '<hidden>'
Oct 11 17:48:33 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/487
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.4078] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:48:33 IQ138000 NetworkManager[403]: <info>  [1760204913.4080] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:48:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:48:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:48:41 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:48:41 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:48:41 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:48:41 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:48:41 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:48:41 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:48:41 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:48:41 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:48:41 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:48:41 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:48:41 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:48:41 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:48:41 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:48:41 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:48:41 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:48:41 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:48:41 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:48:41 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:48:41 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:48:41 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:48:41 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:48:41 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:48:41 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:48:41 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:48:41 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:48:41 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:48:41 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:48:41 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:48:41 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:48:41 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:48:41 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:48:41 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:48:41 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:48:41 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:48:41 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:48:41 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:48:41 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:48:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:48:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:48:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:48:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:48:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:48:59 IQ138000 NetworkManager[403]: <warn>  [1760204939.0219] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:48:59 IQ138000 NetworkManager[403]: <info>  [1760204939.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:48:59 IQ138000 NetworkManager[403]: <warn>  [1760204939.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:48:59 IQ138000 NetworkManager[403]: <info>  [1760204939.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:48:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/487
Oct 11 17:48:59 IQ138000 NetworkManager[403]: <info>  [1760204939.0713] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:48:59 IQ138000 NetworkManager[403]: <info>  [1760204939.0715] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:49:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:05 IQ138000 NetworkManager[403]: <info>  [1760204945.0282] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:49:11 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:49:11 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:49:11 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:49:11 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:49:11 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:49:11 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:49:11 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:49:11 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:49:11 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:49:11 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:49:11 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:49:11 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:49:11 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:49:11 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:49:11 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:49:11 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:49:11 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:49:11 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:49:11 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:49:11 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:49:11 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:49:11 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:49:11 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:49:11 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:49:11 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:49:11 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:49:11 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:49:11 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:49:11 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:49:11 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:49:11 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:49:11 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:49:11 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:49:11 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:49:11 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:49:11 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:49:11 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:49:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:49:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:49:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:49:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:23 IQ138000 wb-watchdog[10379]: [INFO] Interval #693 started. Waiting up to 60 seconds for error...
Oct 11 17:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:29 IQ138000 npm[3801]: [2025-10-11 17:49:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":56.04,"last_seen":1760204969202,"linkquality":61,"power_outage_count":25795,"pressure":991.7,"temperature":22.95,"voltage":2995}'
Oct 11 17:49:29 IQ138000 npm[3801]: [2025-10-11 17:49:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.05,"last_seen":1760204969223,"linkquality":58,"power_outage_count":25795,"pressure":991.7,"temperature":22.95,"voltage":2995}'
Oct 11 17:49:29 IQ138000 npm[3801]: [2025-10-11 17:49:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.05,"last_seen":1760204969223,"linkquality":58,"power_outage_count":25795,"pressure":991.4,"temperature":22.95,"voltage":2995}'
Oct 11 17:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:49:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:49:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:49:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:49:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:49:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:49:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:49:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:49:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:49:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:49:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:49:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:49:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:49:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:49:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:49:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:49:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:49:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:49:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:49:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:49:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:49:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:49:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:49:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:49:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:49:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:49:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:49:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:49:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:49:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:49:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:49:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:49:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:49:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:49:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:49:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:49:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:49:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:49:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:49:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:49:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:53 IQ138000 npm[3801]: [2025-10-11 17:49:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":39.22,"last_seen":1760204993361,"linkquality":83,"power_outage_count":48745,"temperature":27.39,"voltage":3025}'
Oct 11 17:49:53 IQ138000 npm[3801]: [2025-10-11 17:49:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.34,"last_seen":1760204993370,"linkquality":83,"power_outage_count":48745,"temperature":27.39,"voltage":3025}'
Oct 11 17:49:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:49:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:49:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:49:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:49:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:49:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:49:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:49:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.0987] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1006] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1017] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1127] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1155] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1157] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1356] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1393] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1426] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1442] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1452] Config: added 'scan_ssid' value '1'
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1459] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1467] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.1475] Config: added 'psk' value '<hidden>'
Oct 11 17:50:00 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/488
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.2202] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:50:00 IQ138000 NetworkManager[403]: <info>  [1760205000.2204] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:50:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:50:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:50:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:50:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:50:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:50:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:50:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:50:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:50:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:50:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:50:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:50:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:50:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:50:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:50:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:50:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:50:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:50:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:50:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:50:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:50:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:50:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:50:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:50:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:50:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:50:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:50:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:50:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:50:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:50:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:50:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:50:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:50:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:50:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:50:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:50:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:50:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:50:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:50:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:50:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:50:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:23 IQ138000 wb-watchdog[11073]: [INFO] Interval #694 started. Waiting up to 60 seconds for error...
Oct 11 17:50:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:25 IQ138000 NetworkManager[403]: <warn>  [1760205025.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:50:25 IQ138000 NetworkManager[403]: <info>  [1760205025.0223] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:50:25 IQ138000 NetworkManager[403]: <warn>  [1760205025.0270] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:50:25 IQ138000 NetworkManager[403]: <info>  [1760205025.0295] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:50:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/488
Oct 11 17:50:25 IQ138000 NetworkManager[403]: <info>  [1760205025.0753] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:50:25 IQ138000 NetworkManager[403]: <info>  [1760205025.0755] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:50:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:50:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:50:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:50:30 IQ138000 NetworkManager[403]: <info>  [1760205030.8320] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:50:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:50:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:50:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:50:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:50:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:50:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:50:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:50:42 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:50:42 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:50:42 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:50:42 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:50:42 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:50:42 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:50:42 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:50:42 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:50:42 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:50:42 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:50:42 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:50:42 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:50:42 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:50:42 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:50:42 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:50:42 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:50:42 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:50:42 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:50:42 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:50:42 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:50:42 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:50:42 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:50:42 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:50:42 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:50:42 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:50:42 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:50:42 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:50:42 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:50:42 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:50:42 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:50:42 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:50:42 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:50:42 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:50:42 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:50:42 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:50:42 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:50:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:50:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L1, row count 7183, limit 7042
Oct 11 17:50:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L2, row count 7183, limit 7042
Oct 11 17:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:50:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:50:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:50:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:50:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:51:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:51:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:51:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:51:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:04 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L3, row count 7183, limit 7042
Oct 11 17:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:51:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:12 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:12 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:51:12 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:51:12 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:51:12 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:51:12 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:51:12 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:51:12 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:51:12 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:51:12 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:51:12 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:51:12 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:51:12 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:51:12 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:51:12 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:51:12 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:51:12 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:51:12 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:51:12 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:51:12 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:51:12 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:51:12 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:51:12 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:51:12 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:51:12 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:51:12 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:51:12 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:51:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:51:12 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:51:12 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:51:12 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:51:12 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:51:12 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:51:12 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:51:12 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:51:12 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:51:12 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:51:12 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:51:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:51:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:51:23 IQ138000 wb-watchdog[11694]: [INFO] Interval #695 started. Waiting up to 60 seconds for error...
Oct 11 17:51:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:51:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:51:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7616] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7622] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7627] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7680] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7700] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7703] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7792] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7811] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7829] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7832] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7833] Config: added 'scan_ssid' value '1'
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7834] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7835] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.7836] Config: added 'psk' value '<hidden>'
Oct 11 17:51:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/489
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.8510] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:51:25 IQ138000 NetworkManager[403]: <info>  [1760205085.8512] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:51:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:51:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:51:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:51:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:51:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:51:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:51:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:51:38 IQ138000 npm[3801]: [2025-10-11 17:51:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":43.34,"last_seen":1760205098970,"linkquality":80,"power_outage_count":48745,"temperature":27.59,"voltage":3025}'
Oct 11 17:51:38 IQ138000 npm[3801]: [2025-10-11 17:51:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.29,"last_seen":1760205098980,"linkquality":80,"power_outage_count":48745,"temperature":27.59,"voltage":3025}'
Oct 11 17:51:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:42 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:51:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:51:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:51:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:51:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:51:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:51:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:51:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:51:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:51:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:51:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:51:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:51:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:51:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:51:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:51:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:51:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:51:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:51:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:51:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:51:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:51:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:51:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:51:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:51:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:51:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:51:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:51:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:51:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:51:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:51:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:51:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:51:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:51:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:51:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:51:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:51:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:51:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:51:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:51:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:51 IQ138000 NetworkManager[403]: <warn>  [1760205111.0214] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:51:51 IQ138000 NetworkManager[403]: <info>  [1760205111.0216] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:51:51 IQ138000 NetworkManager[403]: <warn>  [1760205111.0260] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:51:51 IQ138000 NetworkManager[403]: <info>  [1760205111.0276] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:51:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/489
Oct 11 17:51:51 IQ138000 NetworkManager[403]: <info>  [1760205111.0783] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:51:51 IQ138000 NetworkManager[403]: <info>  [1760205111.0785] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:51:56 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:57 IQ138000 NetworkManager[403]: <info>  [1760205117.5785] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:51:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:51:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:52:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:52:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:52:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:52:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:52:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:52:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:52:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:52:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:52:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:52:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:52:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:52:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:52:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:52:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:52:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:52:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:52:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:52:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:52:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:52:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:52:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:52:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:52:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:52:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:52:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:52:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:52:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:52:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:52:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:52:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:52:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:52:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:52:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:52:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:52:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:52:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:52:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:52:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:52:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:52:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 17:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:52:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:52:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:52:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:23 IQ138000 wb-watchdog[12381]: [INFO] Interval #696 started. Waiting up to 60 seconds for error...
Oct 11 17:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:52:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:52:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:52:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:52:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:52:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:52:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:52:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:52:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:52:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:52:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:52:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:52:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:52:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:52:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:52:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:52:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:52:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:52:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:52:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:52:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:52:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:52:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:52:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:52:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:52:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:52:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:52:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:52:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:52:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:52:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:52:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:52:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:52:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:52:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:52:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:52:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:52:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:52:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:52:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5148] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5153] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5159] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5216] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5234] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5236] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5339] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5359] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5378] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5381] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5383] Config: added 'scan_ssid' value '1'
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5385] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5386] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.5387] Config: added 'psk' value '<hidden>'
Oct 11 17:52:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/490
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.6101] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:52:52 IQ138000 NetworkManager[403]: <info>  [1760205172.6103] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:52:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:52:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:52:56 IQ138000 NetworkManager[403]: <info>  [1760205176.9615] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:52:56 IQ138000 NetworkManager[403]: <info>  [1760205176.9617] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:52:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:53:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:53:05 IQ138000 NetworkManager[403]: <info>  [1760205185.3753] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:53:05 IQ138000 NetworkManager[403]: <info>  [1760205185.3755] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:53:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:53:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:53:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:53:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:53:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:53:13 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:53:13 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:53:13 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:53:13 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:53:13 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:53:13 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:53:13 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:53:13 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:53:13 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:53:13 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:53:13 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:53:13 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:53:13 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:53:13 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:53:13 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:53:13 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:53:13 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:53:13 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:53:13 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:53:13 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:53:13 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:53:13 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:53:13 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:53:13 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:53:13 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:53:13 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:53:13 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:53:13 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:53:13 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:53:13 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:53:13 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:53:13 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:53:13 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:53:13 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:53:13 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:53:13 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:53:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:53:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:18 IQ138000 NetworkManager[403]: <warn>  [1760205198.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:53:18 IQ138000 NetworkManager[403]: <info>  [1760205198.0252] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:53:18 IQ138000 NetworkManager[403]: <warn>  [1760205198.0290] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:53:18 IQ138000 NetworkManager[403]: <info>  [1760205198.0317] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:53:18 IQ138000 NetworkManager[403]: <info>  [1760205198.0319] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:53:18 IQ138000 NetworkManager[403]: <info>  [1760205198.0363] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:53:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/490
Oct 11 17:53:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:53:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:53:23 IQ138000 wb-watchdog[13008]: [INFO] Interval #697 started. Waiting up to 60 seconds for error...
Oct 11 17:53:24 IQ138000 NetworkManager[403]: <info>  [1760205204.2352] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:53:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:53:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:53:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:53:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 17:53:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:53:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:53:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:53:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:53:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5128 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:53:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:53:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:53:43 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:53:43 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:53:43 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:53:43 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:53:43 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:53:43 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:53:43 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:53:43 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:53:43 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:53:43 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:53:43 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:53:43 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:53:43 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:53:43 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:53:43 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:53:43 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:53:43 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:53:43 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:53:43 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:53:43 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:53:43 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:53:43 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:53:43 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:53:43 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:53:43 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:53:43 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:53:43 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:53:43 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:53:43 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:53:43 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:53:43 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:53:43 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:53:43 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:53:43 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:53:43 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:53:43 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:53:43 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:53:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:53:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:53:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:53:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:53:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:53:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:54:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:54:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:54:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:54:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:54:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:54:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:13 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:54:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:54:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:54:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:54:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:54:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:54:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:54:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:54:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:54:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:54:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:54:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:54:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:54:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:54:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:54:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:54:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:54:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:54:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:54:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:54:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:54:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:54:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:54:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:54:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:54:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:54:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:54:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:54:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:54:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:54:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:54:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:54:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:54:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:54:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:54:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:54:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:54:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:54:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.2961] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.2966] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.2971] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3022] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3040] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3042] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3127] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3147] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3165] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3168] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3169] Config: added 'scan_ssid' value '1'
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3170] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3171] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3172] Config: added 'psk' value '<hidden>'
Oct 11 17:54:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/491
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3842] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:54:19 IQ138000 NetworkManager[403]: <info>  [1760205259.3844] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:54:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:54:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:23 IQ138000 wb-watchdog[13713]: [INFO] Interval #698 started. Waiting up to 60 seconds for error...
Oct 11 17:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:54:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:54:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:54:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:54:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:54:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:54:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:54:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:54:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:54:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:54:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:54:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:54:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:54:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:54:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:54:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:54:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:54:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:54:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:54:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:54:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:54:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:54:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:54:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:54:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:54:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:54:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:54:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:54:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:54:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:54:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:54:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:54:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:54:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:54:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:54:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:54:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:54:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:54:45 IQ138000 NetworkManager[403]: <warn>  [1760205285.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:54:45 IQ138000 NetworkManager[403]: <info>  [1760205285.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:54:45 IQ138000 NetworkManager[403]: <warn>  [1760205285.0264] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:54:45 IQ138000 NetworkManager[403]: <info>  [1760205285.0282] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:54:45 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:54:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/491
Oct 11 17:54:45 IQ138000 NetworkManager[403]: <info>  [1760205285.0884] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:54:45 IQ138000 NetworkManager[403]: <info>  [1760205285.0886] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:54:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:45 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 17:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:51 IQ138000 NetworkManager[403]: <info>  [1760205291.0178] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:54:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:55:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:55:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:55:01 IQ138000 CRON[14048]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 17:55:01 IQ138000 CRON[14052]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 17:55:01 IQ138000 CRON[14048]: pam_unix(cron:session): session closed for user root
Oct 11 17:55:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:55:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:55:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:55:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:55:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:55:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:55:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:55:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:55:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:55:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:55:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:55:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:55:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:55:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:55:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:55:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:55:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:55:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:55:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:55:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:55:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:55:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:55:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:55:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:55:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:55:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:55:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:55:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:55:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:55:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:55:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:55:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:55:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:55:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:55:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:55:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:55:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:55:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:55:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:55:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12860 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:23 IQ138000 wb-watchdog[14321]: [INFO] Interval #699 started. Waiting up to 60 seconds for error...
Oct 11 17:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:55:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:55:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L1, row count 7183, limit 7042
Oct 11 17:55:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:55:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:44 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:55:44 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:55:44 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:55:44 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:55:44 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:55:44 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:55:44 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:55:44 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:55:44 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:55:44 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:55:44 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:55:44 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:55:44 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:55:44 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:55:44 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:55:44 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:55:44 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:55:44 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:55:44 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:55:44 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:55:44 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:55:44 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:55:44 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:55:44 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:55:44 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:55:44 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:55:44 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:55:44 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:55:44 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:55:44 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:55:44 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:55:44 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:55:44 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:55:44 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:55:44 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:55:44 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:55:44 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2181] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2197] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2284] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2453] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2542] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2546] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2837] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2858] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2877] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2881] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:55:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/492
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2882] Config: added 'scan_ssid' value '1'
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2883] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2884] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:55:46 IQ138000 NetworkManager[403]: <info>  [1760205346.2885] Config: added 'psk' value '<hidden>'
Oct 11 17:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 17:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 17:55:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:55:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:55:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:50 IQ138000 NetworkManager[403]: <info>  [1760205350.3655] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:55:50 IQ138000 NetworkManager[403]: <info>  [1760205350.3658] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:55:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:55:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:55:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:55:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:55:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:55:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:56:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:56:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:56:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:12 IQ138000 NetworkManager[403]: <warn>  [1760205372.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:56:12 IQ138000 NetworkManager[403]: <info>  [1760205372.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:56:12 IQ138000 NetworkManager[403]: <warn>  [1760205372.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:56:12 IQ138000 NetworkManager[403]: <info>  [1760205372.0370] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:56:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/492
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:12 IQ138000 NetworkManager[403]: <info>  [1760205372.2076] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:56:12 IQ138000 NetworkManager[403]: <info>  [1760205372.2090] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:56:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:56:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 17:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:56:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:56:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:14 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:56:14 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:56:14 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:56:14 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:56:14 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:56:14 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:56:14 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:56:14 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:56:14 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:56:14 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:56:14 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:56:14 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:56:14 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:56:14 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:56:14 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:56:14 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:56:14 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:56:14 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:56:14 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:56:14 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:56:14 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:56:14 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:56:14 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:56:14 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:56:14 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:56:14 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:56:14 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:56:14 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:56:14 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:56:14 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:56:14 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:56:14 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:56:14 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:56:14 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:56:14 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:56:14 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:56:14 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:56:18 IQ138000 NetworkManager[403]: <info>  [1760205378.0846] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:56:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:23 IQ138000 wb-watchdog[15032]: [INFO] Interval #700 started. Waiting up to 60 seconds for error...
Oct 11 17:56:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:56:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:56:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9490 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:56:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:56:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:56:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:56:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:56:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:56:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:56:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:56:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:56:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:56:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:56:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:56:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:56:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:56:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:56:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:56:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:56:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:56:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:56:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:56:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:56:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:56:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:56:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:56:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:56:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:56:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:56:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:56:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:56:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:56:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:56:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:56:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:56:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:56:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:56:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:56:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:56:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:56:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:56:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:56:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:56:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:56:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:56:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:53 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 17:56:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:56:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:56:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:56:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:56:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1498] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1503] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1510] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1567] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1587] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1589] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1712] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1733] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1756] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1760] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1761] Config: added 'scan_ssid' value '1'
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1762] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1764] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.1765] Config: added 'psk' value '<hidden>'
Oct 11 17:57:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/493
Oct 11 17:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.2501] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:57:13 IQ138000 NetworkManager[403]: <info>  [1760205433.2504] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 17:57:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:57:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:57:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:57:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:57:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:57:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:57:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:57:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:57:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:57:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:57:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:57:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:57:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:57:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:57:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:57:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:57:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:57:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:57:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:57:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:57:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:57:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:57:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:57:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:57:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:57:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:57:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:57:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:57:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:57:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:57:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:57:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:57:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:57:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:57:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:57:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:57:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:57:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:57:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:23 IQ138000 wb-watchdog[15641]: [INFO] Interval #701 started. Waiting up to 60 seconds for error...
Oct 11 17:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:57:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:57:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:57:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:57:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 17:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:57:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 17:57:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 8974 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:57:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:57:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:57:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:57:38 IQ138000 NetworkManager[403]: <warn>  [1760205458.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:57:38 IQ138000 NetworkManager[403]: <info>  [1760205458.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:57:38 IQ138000 NetworkManager[403]: <warn>  [1760205458.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:57:38 IQ138000 NetworkManager[403]: <info>  [1760205458.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:57:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/493
Oct 11 17:57:38 IQ138000 NetworkManager[403]: <info>  [1760205458.0728] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:57:38 IQ138000 NetworkManager[403]: <info>  [1760205458.0730] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:57:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:57:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:57:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:57:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:57:43 IQ138000 NetworkManager[403]: <info>  [1760205463.8666] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:57:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:57:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:57:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:57:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:57:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:57:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:57:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:57:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:57:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:57:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:57:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:57:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:57:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:57:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:57:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:57:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:57:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:57:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:57:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:57:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:57:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:57:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:57:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:57:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:57:45 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:57:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:57:45 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:57:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:45 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:57:45 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:57:45 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:57:45 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:57:45 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:57:45 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:57:45 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:57:45 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:57:45 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:57:45 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:57:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:57:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:57:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:57:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:57:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:57:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:57:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:57:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:57:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:57:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:57:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:58:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 17:58:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:58:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 17:58:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:15 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:58:15 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:58:15 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:58:15 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:58:15 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:58:15 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:58:15 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:58:15 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:58:15 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:58:15 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:58:15 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:58:15 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:58:15 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:58:15 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:58:15 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:58:15 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:58:15 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:58:15 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:58:15 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:58:15 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:58:15 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:58:15 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:58:15 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:58:15 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:58:15 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:58:15 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:58:15 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:58:15 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:58:15 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:58:15 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:58:15 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:58:15 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:58:15 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:58:15 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:58:15 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:58:15 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:58:15 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:58:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 5891 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:23 IQ138000 wb-watchdog[16334]: [INFO] Interval #702 started. Waiting up to 60 seconds for error...
Oct 11 17:58:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:58:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:58:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:58:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13076 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.7808] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.7814] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.7820] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.7904] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.7927] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.7930] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8086] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8120] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8143] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8147] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8148] Config: added 'scan_ssid' value '1'
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8149] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8150] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.8151] Config: added 'psk' value '<hidden>'
Oct 11 17:58:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/494
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.9016] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 17:58:38 IQ138000 NetworkManager[403]: <info>  [1760205518.9020] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 17:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:45 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:58:45 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:58:45 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:58:45 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:58:45 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:58:45 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:58:45 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:58:45 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:58:45 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:58:45 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:58:45 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:58:45 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:58:45 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:58:45 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:58:45 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:58:45 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:58:45 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:58:45 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:58:45 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:58:45 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:58:45 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:58:45 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:58:45 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:58:45 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:45 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:58:45 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:58:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:58:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:58:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:58:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:58:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:58:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:58:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:58:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:58:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:58:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:58:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:58:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:58:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:58:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:58:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:58:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:58:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:58:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:58:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:58:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:58:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:58:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:58:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:58:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:58:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:59:04 IQ138000 NetworkManager[403]: <warn>  [1760205544.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 17:59:04 IQ138000 NetworkManager[403]: <info>  [1760205544.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 17:59:04 IQ138000 NetworkManager[403]: <warn>  [1760205544.0237] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 17:59:04 IQ138000 NetworkManager[403]: <info>  [1760205544.0250] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 17:59:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/494
Oct 11 17:59:04 IQ138000 NetworkManager[403]: <info>  [1760205544.0753] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 17:59:04 IQ138000 NetworkManager[403]: <info>  [1760205544.0755] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 17:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:59:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:59:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 17:59:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:10 IQ138000 NetworkManager[403]: <info>  [1760205550.5677] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 17:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 17:59:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8748 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:59:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 17:59:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:59:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:59:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:59:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:59:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:59:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:59:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:59:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:59:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:59:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:59:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:59:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:59:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:59:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:59:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:59:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:59:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:59:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:59:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:59:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:59:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:59:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:59:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:59:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:59:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:59:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:59:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:59:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:59:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:59:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:59:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:59:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:59:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:59:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:59:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:59:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:59:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:59:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:59:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:59:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:59:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:59:23 IQ138000 wb-watchdog[16962]: [INFO] Interval #703 started. Waiting up to 60 seconds for error...
Oct 11 17:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 17:59:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 17:59:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 17:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:59:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 17:59:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 17:59:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 17:59:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 17:59:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 17:59:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 17:59:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 17:59:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 17:59:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 17:59:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 17:59:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 17:59:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 17:59:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 17:59:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 17:59:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 17:59:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 17:59:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 17:59:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 17:59:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 17:59:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 17:59:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 17:59:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 17:59:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 17:59:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:59:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 17:59:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 17:59:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 17:59:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:59:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 17:59:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 17:59:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 17:59:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 17:59:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 17:59:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 17:59:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 17:59:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 17:59:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 17:59:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 17:59:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 17:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 17:59:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.5937] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.5941] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.5946] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6023] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6055] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6057] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6157] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6184] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6214] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6217] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6220] Config: added 'scan_ssid' value '1'
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6222] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6223] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6224] Config: added 'psk' value '<hidden>'
Oct 11 18:00:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/495
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6947] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:00:05 IQ138000 NetworkManager[403]: <info>  [1760205605.6961] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:00:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:00:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:00:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:00:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:00:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:00:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:00:16 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:00:16 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:00:16 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:00:16 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:00:16 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:00:16 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:00:16 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:00:16 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:00:16 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:00:16 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:00:16 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:00:16 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:00:16 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:00:16 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:00:16 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:00:16 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:00:16 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:00:16 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:00:16 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:00:16 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:00:16 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:00:16 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:00:16 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:00:16 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:00:16 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:00:16 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:00:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:16 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:00:16 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:00:16 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:00:16 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:00:16 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:00:16 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:00:16 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:00:16 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:00:16 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:00:16 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:00:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:00:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:23 IQ138000 wb-watchdog[17656]: [INFO] Interval #704 started. Waiting up to 60 seconds for error...
Oct 11 18:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:00:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:00:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:31 IQ138000 NetworkManager[403]: <warn>  [1760205631.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:00:31 IQ138000 NetworkManager[403]: <info>  [1760205631.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:00:31 IQ138000 NetworkManager[403]: <warn>  [1760205631.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:00:31 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:00:31 IQ138000 NetworkManager[403]: <info>  [1760205631.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:00:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/495
Oct 11 18:00:31 IQ138000 NetworkManager[403]: <info>  [1760205631.0656] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:00:31 IQ138000 NetworkManager[403]: <info>  [1760205631.0658] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:00:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:37 IQ138000 NetworkManager[403]: <info>  [1760205637.3221] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:00:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:00:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:00:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:46 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:00:46 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:00:46 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:00:46 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:00:46 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:00:46 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:00:46 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:00:46 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:00:46 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:00:46 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:00:46 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:00:46 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:00:46 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:00:46 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:00:46 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:00:46 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:00:46 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:00:46 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:00:46 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:00:46 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:00:46 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:00:46 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:00:46 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:00:46 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:00:46 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:00:46 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:00:46 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:00:46 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:00:46 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:00:46 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:00:46 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:00:46 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:00:46 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:00:46 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:00:46 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:00:46 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:00:46 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:00:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:00:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:00:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:00:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:00:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:00:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:01:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:01:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:16 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:01:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:01:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:01:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:01:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:01:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:01:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:01:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:01:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:01:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:01:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:01:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:01:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:01:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:01:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:01:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:01:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:01:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:01:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:01:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:01:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:01:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:01:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:01:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:01:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:01:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:01:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:01:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:01:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:01:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:01:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:01:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:01:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:01:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:01:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:01:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:01:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:01:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:01:23 IQ138000 wb-watchdog[18271]: [INFO] Interval #705 started. Waiting up to 60 seconds for error...
Oct 11 18:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:24 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:01:24 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:01:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:01:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:01:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2264] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2268] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2273] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2325] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2343] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2345] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2426] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2450] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2470] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2473] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2474] Config: added 'scan_ssid' value '1'
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2475] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2477] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.2477] Config: added 'psk' value '<hidden>'
Oct 11 18:01:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/496
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.3324] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:01:32 IQ138000 NetworkManager[403]: <info>  [1760205692.3326] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:01:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:01:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:01:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:01:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:01:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:01:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:01:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:01:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:01:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:01:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:01:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:01:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:01:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:01:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:01:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:01:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:01:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:01:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:01:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:01:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:01:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:01:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:01:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:01:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:01:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:01:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:01:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:01:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:01:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:01:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:01:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:01:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:01:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:01:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:01:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:01:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:01:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:01:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:01:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:01:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:01:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:01:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:01:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:01:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:01:57 IQ138000 NetworkManager[403]: <warn>  [1760205717.0220] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:01:57 IQ138000 NetworkManager[403]: <info>  [1760205717.0222] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:01:57 IQ138000 NetworkManager[403]: <warn>  [1760205717.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:01:57 IQ138000 NetworkManager[403]: <info>  [1760205717.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:01:57 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/496
Oct 11 18:01:57 IQ138000 NetworkManager[403]: <info>  [1760205717.0754] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:01:57 IQ138000 NetworkManager[403]: <info>  [1760205717.0756] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:01:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:01:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:01:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:02:02 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:02:03 IQ138000 NetworkManager[403]: <info>  [1760205723.0104] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:02:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:02:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:02:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:02:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:02:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:02:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:02:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:02:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:02:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:02:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:02:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:02:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:02:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:02:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:02:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:02:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:02:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:02:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:02:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:02:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:02:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:02:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:02:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:02:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:02:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:02:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:02:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:02:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:02:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:02:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:02:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:02:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:02:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:02:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:02:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:02:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:02:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:02:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:02:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:02:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:02:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:02:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:02:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:02:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:02:23 IQ138000 wb-watchdog[18968]: [INFO] Interval #706 started. Waiting up to 60 seconds for error...
Oct 11 18:02:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:02:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:02:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:02:30 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:02:30 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:02:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:02:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:02:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:02:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:02:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:02:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:02:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:02:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:47 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:02:47 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:02:47 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:02:47 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:02:47 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:02:47 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:02:47 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:02:47 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:02:47 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:02:47 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:02:47 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:02:47 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:02:47 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:02:47 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:02:47 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:02:47 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:02:47 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:02:47 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:02:47 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:02:47 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:02:47 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:02:47 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:02:47 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:02:47 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:02:47 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:02:47 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:02:47 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:02:47 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:02:47 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:02:47 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:02:47 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:02:47 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:02:47 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:02:47 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:02:47 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:02:47 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:02:47 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:02:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:02:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2344] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2349] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2355] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2414] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2433] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2434] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2535] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2554] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2571] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2574] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2575] Config: added 'scan_ssid' value '1'
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2576] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2577] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.2578] Config: added 'psk' value '<hidden>'
Oct 11 18:02:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/497
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.3367] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:02:58 IQ138000 NetworkManager[403]: <info>  [1760205778.3369] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:02:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:02:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:01 IQ138000 NetworkManager[403]: <info>  [1760205781.8735] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:03:01 IQ138000 NetworkManager[403]: <info>  [1760205781.8737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:03:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:03:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:10 IQ138000 NetworkManager[403]: <info>  [1760205790.3301] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:03:10 IQ138000 NetworkManager[403]: <info>  [1760205790.3304] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:03:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:03:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:03:17 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:03:17 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:03:17 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:03:17 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:03:17 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:03:17 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:03:17 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:03:17 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:03:17 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:03:17 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:03:17 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:03:17 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:03:17 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:03:17 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:03:17 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:03:17 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:03:17 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:03:17 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:03:17 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:03:17 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:03:17 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:03:17 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:03:17 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:03:17 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:03:17 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:03:17 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:03:17 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:03:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:17 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:03:17 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:03:17 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:03:17 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:03:17 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:03:17 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:03:17 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:03:17 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:03:17 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:03:17 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:03:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:03:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:03:23 IQ138000 NetworkManager[403]: <warn>  [1760205803.0210] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:03:23 IQ138000 NetworkManager[403]: <info>  [1760205803.0212] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:03:23 IQ138000 NetworkManager[403]: <warn>  [1760205803.0240] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:03:23 IQ138000 NetworkManager[403]: <info>  [1760205803.0253] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:03:23 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/497
Oct 11 18:03:23 IQ138000 NetworkManager[403]: <info>  [1760205803.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:03:23 IQ138000 NetworkManager[403]: <info>  [1760205803.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:03:23 IQ138000 wb-watchdog[19583]: [INFO] Interval #707 started. Waiting up to 60 seconds for error...
Oct 11 18:03:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:03:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:03:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:03:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:03:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:29 IQ138000 NetworkManager[403]: <info>  [1760205809.0098] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:03:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:03:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:03:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:03:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:03:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:03:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:03:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:03:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:03:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:03:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:03:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:03:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:03:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:03:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:03:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:03:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:03:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:03:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:03:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:03:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:03:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:03:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:03:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:03:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:03:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:03:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:03:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:03:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:03:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:03:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:03:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:03:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:03:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:03:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:03:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:03:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:03:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:03:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:03:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:03:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:03:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:03:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:03:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:56 IQ138000 npm[3801]: [2025-10-11 18:03:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":41.82,"last_seen":1760205836861,"linkquality":94,"power_outage_count":48745,"temperature":27.43,"voltage":3025}'
Oct 11 18:03:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:03:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:04:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:04:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:04:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:04:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:04:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:04:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:04:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:04:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:04:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:04:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:04:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:04:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:04:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:04:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:04:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:04:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:04:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:04:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:04:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:04:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:04:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:04:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:04:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:04:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:04:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:04:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:04:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:04:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:04:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:04:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:04:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:04:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:04:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:04:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:04:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:04:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:04:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:04:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:04:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:04:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:04:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:04:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:04:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:23 IQ138000 wb-watchdog[20286]: [INFO] Interval #708 started. Waiting up to 60 seconds for error...
Oct 11 18:04:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1140] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1145] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1151] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1227] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1254] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1256] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1360] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1379] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1396] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1400] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1401] Config: added 'scan_ssid' value '1'
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1404] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1407] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.1408] Config: added 'psk' value '<hidden>'
Oct 11 18:04:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/498
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.2153] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:04:24 IQ138000 NetworkManager[403]: <info>  [1760205864.2159] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:04:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 5120 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:04:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:04:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:04:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:04:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:04:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:04:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:04:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:04:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:04:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:04:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:04:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:04:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:04:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:04:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:04:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:04:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:04:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:04:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:04:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:04:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:04:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:04:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:04:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:04:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:04:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:04:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:04:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:04:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:04:48 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:04:48 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:04:48 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:04:48 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:04:48 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:04:48 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:04:48 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:04:48 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:04:48 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:04:48 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:04:49 IQ138000 NetworkManager[403]: <warn>  [1760205889.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:04:49 IQ138000 NetworkManager[403]: <info>  [1760205889.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:04:49 IQ138000 NetworkManager[403]: <warn>  [1760205889.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:04:49 IQ138000 NetworkManager[403]: <info>  [1760205889.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:04:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/498
Oct 11 18:04:49 IQ138000 NetworkManager[403]: <info>  [1760205889.0723] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:04:49 IQ138000 NetworkManager[403]: <info>  [1760205889.0725] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:04:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:04:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:04:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:04:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:04:54 IQ138000 NetworkManager[403]: <info>  [1760205894.8295] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:04:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L3, row count 7183, limit 7042
Oct 11 18:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:04:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:05:01 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:01 IQ138000 CRON[20627]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:05:01 IQ138000 CRON[20632]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 18:05:01 IQ138000 CRON[20627]: pam_unix(cron:session): session closed for user root
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:05:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:05:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:05:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:05:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:05:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:05:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:18 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:05:18 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:05:18 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:05:18 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:05:18 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:05:18 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:05:18 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:05:18 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:05:18 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:05:18 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:05:18 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:05:18 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:05:18 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:05:18 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:05:18 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:05:18 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:05:18 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:05:18 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:05:18 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:05:18 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:05:18 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:05:18 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:05:18 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:05:18 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:05:18 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:05:18 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:05:18 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:05:18 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:05:18 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:05:18 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:05:18 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:05:18 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:05:18 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:05:18 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:05:18 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:05:18 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:05:18 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:05:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:05:23 IQ138000 wb-watchdog[20910]: [INFO] Interval #709 started. Waiting up to 60 seconds for error...
Oct 11 18:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:05:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:05:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:05:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:05:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:05:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:05:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:48 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:05:48 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:05:48 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:05:48 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:05:48 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:05:48 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:05:48 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:05:48 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:05:48 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:05:48 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:05:48 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:05:48 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:05:48 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:05:48 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:05:48 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:05:48 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:05:48 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:05:48 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:05:48 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:05:48 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:05:48 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:05:48 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:05:48 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:05:48 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:05:48 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:05:48 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:05:48 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:05:48 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:05:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:05:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:05:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:05:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:05:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:05:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:05:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:05:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:05:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:05:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:05:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:05:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8692] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8700] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8709] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8771] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8791] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8792] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8892] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8919] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8959] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8962] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8963] Config: added 'scan_ssid' value '1'
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8964] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8965] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.8968] Config: added 'psk' value '<hidden>'
Oct 11 18:05:49 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/499
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.9653] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:05:49 IQ138000 NetworkManager[403]: <info>  [1760205949.9656] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:05:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:05:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:05:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:05:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:05:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:06:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:06:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:06:15 IQ138000 NetworkManager[403]: <warn>  [1760205975.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:06:15 IQ138000 NetworkManager[403]: <info>  [1760205975.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:06:15 IQ138000 NetworkManager[403]: <warn>  [1760205975.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:06:15 IQ138000 NetworkManager[403]: <info>  [1760205975.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:06:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/499
Oct 11 18:06:15 IQ138000 NetworkManager[403]: <info>  [1760205975.0689] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:06:15 IQ138000 NetworkManager[403]: <info>  [1760205975.0691] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:06:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:06:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:06:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:06:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:06:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:06:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:06:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:06:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:06:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:06:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:06:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:06:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:06:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:06:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:06:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:06:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:06:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:06:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:06:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:06:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:06:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:06:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:06:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:06:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:06:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:06:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:06:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:06:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:06:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:06:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:06:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:06:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:06:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:06:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:06:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:06:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:06:20 IQ138000 NetworkManager[403]: <info>  [1760205980.6744] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:06:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:23 IQ138000 wb-watchdog[21612]: [INFO] Interval #710 started. Waiting up to 60 seconds for error...
Oct 11 18:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:06:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:06:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:06:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:06:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:06:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:06:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:06:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:06:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:06:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:06:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:06:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:06:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:06:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:06:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:06:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:06:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:06:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:06:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:06:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:06:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:06:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:06:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:06:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:06:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:06:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:06:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:06:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:06:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:06:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:06:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:06:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:06:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:06:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:06:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:06:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:06:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:06:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:06:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:06:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:06:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:06:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:06:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:06:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:06:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:06:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:06:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:06:59 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 18:07:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:07:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:07:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:07:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.5946] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.5951] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.5964] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6020] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6040] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6042] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6146] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6176] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6192] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6195] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6195] Config: added 'scan_ssid' value '1'
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6196] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6197] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6199] Config: added 'psk' value '<hidden>'
Oct 11 18:07:15 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/500
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6974] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:07:15 IQ138000 NetworkManager[403]: <info>  [1760206035.6976] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:07:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 18:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 18:07:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 18:07:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 18:07:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:07:19 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:07:19 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:07:19 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:07:19 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:07:19 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:07:19 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:07:19 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:07:19 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:07:19 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:07:19 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:07:19 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:07:19 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:07:19 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:07:19 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:07:19 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:07:19 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:07:19 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:07:19 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:07:19 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:07:19 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:07:19 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:07:19 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:07:19 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:07:19 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:07:19 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:07:19 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:07:19 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:07:19 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:07:19 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:07:19 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:07:19 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:07:19 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:07:19 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:07:19 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:07:19 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:07:19 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:07:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:23 IQ138000 wb-watchdog[22227]: [INFO] Interval #711 started. Waiting up to 60 seconds for error...
Oct 11 18:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:07:26 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:07:26 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:07:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:07:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:07:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:07:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:07:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:07:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:07:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:41 IQ138000 NetworkManager[403]: <warn>  [1760206061.0212] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:07:41 IQ138000 NetworkManager[403]: <info>  [1760206061.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:07:41 IQ138000 NetworkManager[403]: <warn>  [1760206061.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:07:41 IQ138000 NetworkManager[403]: <info>  [1760206061.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:07:41 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:07:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/500
Oct 11 18:07:41 IQ138000 NetworkManager[403]: <info>  [1760206061.0632] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:07:41 IQ138000 NetworkManager[403]: <info>  [1760206061.0634] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:07:41 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:07:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:07:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:07:47 IQ138000 NetworkManager[403]: <info>  [1760206067.3129] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:07:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:07:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:07:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:49 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:07:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:49 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:07:49 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:07:49 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:07:49 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:07:49 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:07:49 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:07:49 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:07:49 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:07:49 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:07:49 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:07:49 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:07:49 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:07:49 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:07:49 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:07:49 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:07:49 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:07:49 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:07:49 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:07:49 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:07:49 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:07:49 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:07:49 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:07:49 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:07:49 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:07:49 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:07:49 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:07:49 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:07:49 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:07:49 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:07:49 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:07:49 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:07:49 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:07:49 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:07:49 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:07:49 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:07:49 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:07:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:07:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:07:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:07:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:07:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:07:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:07:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:07:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:01 IQ138000 CRON[22585]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:08:01 IQ138000 CRON[22590]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 18:08:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:08:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:08:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:08:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:08:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:08:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:08:07 IQ138000 sSMTP[22680]: Unable to locate mail
Oct 11 18:08:07 IQ138000 sSMTP[22680]: Cannot open mail:25
Oct 11 18:08:07 IQ138000 cron[22680]: sendmail: Cannot open mail:25
Oct 11 18:08:07 IQ138000 CRON[22585]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 18:08:07 IQ138000 CRON[22585]: pam_unix(cron:session): session closed for user root
Oct 11 18:08:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:08:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:19 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:08:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:08:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:08:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:08:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:08:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:08:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:08:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:08:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:08:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:08:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:08:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:08:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:08:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:08:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:08:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:08:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:08:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:08:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:08:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:08:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:08:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:08:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:08:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:08:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:08:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:08:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:08:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:08:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:08:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:08:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:08:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:08:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:08:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:08:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:08:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:08:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:08:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:08:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:08:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:23 IQ138000 wb-watchdog[22942]: [INFO] Interval #712 started. Waiting up to 60 seconds for error...
Oct 11 18:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:08:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:08:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.3804] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.3809] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.3830] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.3915] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.3935] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.3937] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4103] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4174] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4211] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4256] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4261] Config: added 'scan_ssid' value '1'
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4263] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4265] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:08:42 IQ138000 NetworkManager[403]: <info>  [1760206122.4266] Config: added 'psk' value '<hidden>'
Oct 11 18:08:42 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/501
Oct 11 18:08:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:08:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:08:44 IQ138000 NetworkManager[403]: <info>  [1760206124.5087] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:08:44 IQ138000 NetworkManager[403]: <info>  [1760206124.5089] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:08:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:08:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:08:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:08:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:08:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:08:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:08:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:08:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:08:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:08:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:08:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:08:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:08:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:08:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:08:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:08:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:08:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:08:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:08:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:08:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:08:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:08:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:08:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:08:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:08:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:08:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:08:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:08:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:08:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:08:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:08:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:08:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:08:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:08:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:08:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:08:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:08:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:08:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:08:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:08:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:08:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:08:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:09:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:09:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:09:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:09:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:09:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:09:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:08 IQ138000 NetworkManager[403]: <warn>  [1760206148.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:09:08 IQ138000 NetworkManager[403]: <info>  [1760206148.0220] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:09:08 IQ138000 NetworkManager[403]: <warn>  [1760206148.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:09:08 IQ138000 NetworkManager[403]: <info>  [1760206148.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:09:08 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/501
Oct 11 18:09:08 IQ138000 NetworkManager[403]: <info>  [1760206148.0628] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:09:08 IQ138000 NetworkManager[403]: <info>  [1760206148.0630] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:09:14 IQ138000 NetworkManager[403]: <info>  [1760206154.1503] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:09:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:09:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:09:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:09:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:09:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:09:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:09:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:09:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:09:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:09:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:09:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:09:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:09:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:09:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:09:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:09:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:09:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:09:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:09:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:09:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:09:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:09:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:09:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:09:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:09:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:09:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:09:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:09:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:09:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:09:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:09:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:09:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:09:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:09:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:09:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:09:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:09:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:09:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:09:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:09:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:23 IQ138000 wb-watchdog[23561]: [INFO] Interval #713 started. Waiting up to 60 seconds for error...
Oct 11 18:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:09:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:09:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:09:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13318 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:09:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:09:50 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:09:50 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:09:50 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:09:50 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:09:50 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:09:50 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:09:50 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:09:50 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:09:50 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:09:50 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:09:50 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:09:50 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:09:50 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:09:50 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:09:50 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:09:50 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:09:50 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:09:50 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:09:50 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:09:50 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:09:50 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:09:50 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:09:50 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:09:50 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:09:50 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:09:50 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:09:50 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:09:50 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:09:50 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:09:50 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:09:50 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:09:50 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:09:50 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:09:50 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:09:50 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:09:50 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:09:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:09:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:09:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:09:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:10:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:10:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:10:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2430] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2434] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2440] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2502] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2523] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2525] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2658] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2683] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2721] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2725] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2726] Config: added 'scan_ssid' value '1'
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2727] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2728] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.2728] Config: added 'psk' value '<hidden>'
Oct 11 18:10:09 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/502
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.3460] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:10:09 IQ138000 NetworkManager[403]: <info>  [1760206209.3462] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:10:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:10:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:10:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:10:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:20 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:10:20 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:10:20 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:10:20 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:10:20 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:10:20 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:10:20 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:10:20 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:10:20 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:10:20 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:10:20 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:10:20 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:10:20 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:10:20 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:10:20 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:10:20 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:10:20 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:10:20 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:10:20 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:10:20 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:10:20 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:10:20 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:10:20 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:10:20 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:10:20 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:10:20 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:10:20 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:10:20 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:10:20 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:10:20 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:10:20 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:10:20 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:10:20 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:10:20 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:10:20 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:10:20 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:10:20 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:10:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:10:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:10:23 IQ138000 wb-watchdog[24259]: [INFO] Interval #714 started. Waiting up to 60 seconds for error...
Oct 11 18:10:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:35 IQ138000 NetworkManager[403]: <warn>  [1760206235.0223] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:10:35 IQ138000 NetworkManager[403]: <info>  [1760206235.0226] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:10:35 IQ138000 NetworkManager[403]: <warn>  [1760206235.0259] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:10:35 IQ138000 NetworkManager[403]: <info>  [1760206235.0272] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:10:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:35 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/502
Oct 11 18:10:35 IQ138000 NetworkManager[403]: <info>  [1760206235.0741] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:10:35 IQ138000 NetworkManager[403]: <info>  [1760206235.0743] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:10:35 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:10:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:10:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:41 IQ138000 NetworkManager[403]: <info>  [1760206241.0331] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:10:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:10:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:50 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:10:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:10:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:10:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:10:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:10:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:10:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:10:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:10:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:10:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:10:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:10:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:10:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:10:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:10:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:10:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:10:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:10:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:10:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:10:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:10:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:10:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:10:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:10:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:10:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:10:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:10:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:10:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:10:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:10:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:10:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:10:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:10:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:10:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:10:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:10:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:10:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:10:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:10:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:10:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:10:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8756 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:10:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:10:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:11:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:11:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:11:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 npm[3801]: [2025-10-11 18:11:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":55.05,"last_seen":1760206272666,"linkquality":72,"power_outage_count":25795,"pressure":991.4,"temperature":22.71,"voltage":2995}'
Oct 11 18:11:12 IQ138000 npm[3801]: [2025-10-11 18:11:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.74,"last_seen":1760206272682,"linkquality":76,"power_outage_count":25795,"pressure":991.4,"temperature":22.71,"voltage":2995}'
Oct 11 18:11:12 IQ138000 npm[3801]: [2025-10-11 18:11:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.74,"last_seen":1760206272682,"linkquality":76,"power_outage_count":25795,"pressure":991.2,"temperature":22.71,"voltage":2995}'
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:11:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:11:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:11:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:11:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:11:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:11:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:11:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:11:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:11:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:11:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:11:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:11:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:11:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:11:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:11:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:11:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:11:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:11:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:11:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:11:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:11:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:11:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:11:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:11:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:11:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:11:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:11:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:11:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:11:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:11:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:11:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:11:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:11:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:11:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:11:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:11:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:11:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:11:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:11:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:11:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:23 IQ138000 wb-watchdog[24877]: [INFO] Interval #715 started. Waiting up to 60 seconds for error...
Oct 11 18:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:11:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:11:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:11:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2516] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2521] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2527] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2584] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2605] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2607] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2699] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2728] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2751] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2754] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2755] Config: added 'scan_ssid' value '1'
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2756] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2757] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:11:36 IQ138000 NetworkManager[403]: <info>  [1760206296.2758] Config: added 'psk' value '<hidden>'
Oct 11 18:11:36 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/503
Oct 11 18:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:11:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:11:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:11:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:11:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:11:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:40 IQ138000 NetworkManager[403]: <info>  [1760206300.3562] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:11:40 IQ138000 NetworkManager[403]: <info>  [1760206300.3564] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:11:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:11:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:11:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:11:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:11:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:11:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:11:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:11:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:11:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:11:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:11:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:11:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:11:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:11:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:11:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:11:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:11:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:11:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:11:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:11:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:11:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:11:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:11:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:11:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:11:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:11:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:11:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:11:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:11:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:11:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:11:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:11:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:11:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:11:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:11:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:11:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:11:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:11:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:11:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:11:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:11:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:11:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:02 IQ138000 NetworkManager[403]: <warn>  [1760206322.0221] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:12:02 IQ138000 NetworkManager[403]: <info>  [1760206322.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:12:02 IQ138000 NetworkManager[403]: <warn>  [1760206322.0253] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:12:02 IQ138000 NetworkManager[403]: <info>  [1760206322.0269] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:12:02 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/503
Oct 11 18:12:02 IQ138000 NetworkManager[403]: <info>  [1760206322.0691] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:12:02 IQ138000 NetworkManager[403]: <info>  [1760206322.0693] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:12:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:12:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:12:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:07 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:12:08 IQ138000 NetworkManager[403]: <info>  [1760206328.0070] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:12:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:12:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 18:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:12:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:12:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:12:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:12:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:12:21 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:12:21 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:12:21 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:12:21 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:12:21 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:12:21 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:12:21 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:12:21 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:12:21 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:12:21 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:12:21 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:12:21 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:12:21 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:12:21 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:12:21 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:12:21 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:12:21 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:12:21 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:12:21 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:12:21 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:12:21 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:12:21 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:12:21 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:12:21 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:12:21 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:12:21 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:12:21 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:12:21 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:12:21 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:12:21 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:12:21 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:12:21 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:12:21 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:12:21 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:12:21 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:12:21 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:23 IQ138000 wb-watchdog[25568]: [INFO] Interval #716 started. Waiting up to 60 seconds for error...
Oct 11 18:12:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:12:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:12:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:12:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:12:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:51 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:12:51 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:12:51 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:12:51 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:12:51 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:12:51 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:12:51 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:12:51 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:12:51 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:12:51 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:12:51 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:12:51 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:12:51 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:12:51 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:12:51 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:12:51 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:12:51 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:12:51 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:12:51 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:12:51 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:12:51 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:12:51 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:12:51 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:12:51 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:12:51 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:12:51 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:12:51 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:12:51 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:12:51 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:12:51 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:12:51 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:12:51 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:12:51 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:12:51 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:12:51 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:12:51 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:12:51 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:12:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:12:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:12:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:12:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:13:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9802] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9807] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9813] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9861] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9888] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9899] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:13:02 IQ138000 NetworkManager[403]: <info>  [1760206382.9982] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0013] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0035] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0041] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0042] Config: added 'scan_ssid' value '1'
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0045] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0047] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0047] Config: added 'psk' value '<hidden>'
Oct 11 18:13:03 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/504
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0746] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:13:03 IQ138000 NetworkManager[403]: <info>  [1760206383.0761] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:13:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:06 IQ138000 NetworkManager[403]: <info>  [1760206386.9232] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:13:06 IQ138000 NetworkManager[403]: <info>  [1760206386.9234] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:13:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:13:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:13:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:15 IQ138000 NetworkManager[403]: <info>  [1760206395.3813] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:13:15 IQ138000 NetworkManager[403]: <info>  [1760206395.3815] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:13:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:13:21 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:13:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:13:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:13:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:13:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:13:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:13:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:13:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:13:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:13:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:13:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:13:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:13:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:13:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:13:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:13:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:13:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:13:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:13:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:13:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:13:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:13:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:13:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:13:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:13:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:13:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:13:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:13:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:13:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:13:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:13:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:13:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:13:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:13:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:13:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:13:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:13:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:13:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:13:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:13:23 IQ138000 wb-watchdog[26192]: [INFO] Interval #717 started. Waiting up to 60 seconds for error...
Oct 11 18:13:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:13:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:13:28 IQ138000 NetworkManager[403]: <warn>  [1760206408.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:13:28 IQ138000 NetworkManager[403]: <info>  [1760206408.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:13:28 IQ138000 NetworkManager[403]: <warn>  [1760206408.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:13:28 IQ138000 NetworkManager[403]: <info>  [1760206408.0268] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:13:28 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/504
Oct 11 18:13:28 IQ138000 NetworkManager[403]: <info>  [1760206408.0685] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:13:28 IQ138000 NetworkManager[403]: <info>  [1760206408.0687] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:13:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:13:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:13:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:13:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:33 IQ138000 NetworkManager[403]: <info>  [1760206413.7517] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:13:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 13324 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:13:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L1, row count 7183, limit 7042
Oct 11 18:13:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:13:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:13:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:13:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:13:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:13:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:13:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:13:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:13:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:13:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:13:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:13:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:13:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:13:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:13:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:13:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:13:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:13:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:13:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:13:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:13:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:13:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:13:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:13:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:13:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:13:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:13:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:13:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:13:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:13:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:13:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:13:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:13:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:13:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:13:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:13:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:13:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:13:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:13:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:13:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 18:13:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 18:13:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 18:13:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 18:13:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:13:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:14:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:14:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:14:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:14:01 IQ138000 npm[3801]: [2025-10-11 18:14:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":45.55,"last_seen":1760206441789,"linkquality":58,"power_outage_count":35250,"temperature":23.94,"voltage":3075}'
Oct 11 18:14:01 IQ138000 npm[3801]: [2025-10-11 18:14:01] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.34,"last_seen":1760206441801,"linkquality":61,"power_outage_count":35250,"temperature":23.94,"voltage":3075}'
Oct 11 18:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:14:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:14:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:14:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:14:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:14:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:14:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:14:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:14:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:14:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:14:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:14:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:14:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:14:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:14:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:14:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:14:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:14:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:14:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:14:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:14:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:14:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:14:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:14:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:14:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:14:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:14:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:14:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:14:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:14:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:14:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:14:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:14:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:14:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:14:22 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:14:22 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:14:22 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:14:22 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:14:22 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:14:22 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:14:22 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:14:22 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:14:22 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:14:22 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:14:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:23 IQ138000 wb-watchdog[26898]: [INFO] Interval #718 started. Waiting up to 60 seconds for error...
Oct 11 18:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:14:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:14:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:14:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:14:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0405] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0416] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0423] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0486] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0507] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0509] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0587] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0608] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0625] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0628] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0629] Config: added 'scan_ssid' value '1'
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0630] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0631] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.0632] Config: added 'psk' value '<hidden>'
Oct 11 18:14:29 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/505
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.1389] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:14:29 IQ138000 NetworkManager[403]: <info>  [1760206469.1392] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:14:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:14:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:14:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:14:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:14:47 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:14:47 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:14:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:14:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:14:52 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:14:52 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:14:52 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:14:52 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:14:52 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:14:52 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:14:52 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:14:52 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:14:52 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:14:52 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:14:52 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:14:52 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:14:52 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:14:52 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:14:52 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:14:52 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:14:52 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:14:52 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:14:52 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:14:52 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:14:52 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:14:52 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:14:52 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:14:52 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:14:52 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:14:52 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:14:52 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:14:52 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:14:52 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:14:52 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:14:52 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:14:52 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:14:52 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:14:52 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:14:52 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:14:52 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:14:52 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:14:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:14:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:14:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:14:54 IQ138000 NetworkManager[403]: <warn>  [1760206494.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:14:54 IQ138000 NetworkManager[403]: <info>  [1760206494.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:14:54 IQ138000 NetworkManager[403]: <warn>  [1760206494.0251] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:14:54 IQ138000 NetworkManager[403]: <info>  [1760206494.0265] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:14:54 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/505
Oct 11 18:14:54 IQ138000 NetworkManager[403]: <info>  [1760206494.0685] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:14:54 IQ138000 NetworkManager[403]: <info>  [1760206494.0689] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:14:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:14:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:14:59 IQ138000 NetworkManager[403]: <info>  [1760206499.7732] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:02 IQ138000 CRON[27231]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:15:02 IQ138000 CRON[27235]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 18:15:02 IQ138000 CRON[27231]: pam_unix(cron:session): session closed for user root
Oct 11 18:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:06 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:15:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:15:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:15:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:15:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:15:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:15:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:15:22 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:15:22 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:15:22 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:15:22 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:15:22 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:15:22 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:15:22 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:15:22 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:15:22 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:15:22 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:15:22 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:15:22 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:15:22 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:15:22 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:15:22 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:15:22 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:15:22 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:15:22 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:15:22 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:15:22 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:15:22 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:15:22 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:15:22 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:15:22 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:15:22 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:15:22 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:22 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:15:22 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:15:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:15:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:15:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:15:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:15:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:15:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:15:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:15:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:15:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:15:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:15:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:15:23 IQ138000 wb-watchdog[27504]: [INFO] Interval #719 started. Waiting up to 60 seconds for error...
Oct 11 18:15:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:15:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:15:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:15:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:15:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:15:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:15:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:15:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L2, row count 7183, limit 7042
Oct 11 18:15:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:15:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:45 IQ138000 npm[3801]: [2025-10-11 18:15:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.74,"last_seen":1760206545763,"linkquality":65,"power_outage_count":25795,"pressure":991.2,"temperature":22.67,"voltage":2995}'
Oct 11 18:15:45 IQ138000 npm[3801]: [2025-10-11 18:15:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.36,"last_seen":1760206545779,"linkquality":65,"power_outage_count":25795,"pressure":991.2,"temperature":22.67,"voltage":2995}'
Oct 11 18:15:45 IQ138000 npm[3801]: [2025-10-11 18:15:45] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.36,"last_seen":1760206545779,"linkquality":65,"power_outage_count":25795,"pressure":991.5,"temperature":22.67,"voltage":2995}'
Oct 11 18:15:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:15:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:15:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:15:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:15:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:15:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:15:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:15:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:15:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:15:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:15:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:15:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:15:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:15:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:15:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:15:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:15:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:15:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:15:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:15:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:15:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:15:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:15:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:15:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:15:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:15:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:15:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:15:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:15:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:15:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:15:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:15:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:15:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:15:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:15:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:15:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:15:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:15:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9541] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9545] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9551] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9606] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9626] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9628] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9708] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9730] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9747] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9751] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9753] Config: added 'scan_ssid' value '1'
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9754] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9755] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:15:54 IQ138000 NetworkManager[403]: <info>  [1760206554.9756] Config: added 'psk' value '<hidden>'
Oct 11 18:15:55 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/506
Oct 11 18:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:55 IQ138000 NetworkManager[403]: <info>  [1760206555.0410] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:15:55 IQ138000 NetworkManager[403]: <info>  [1760206555.0412] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:15:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:15:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:16:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:06 IQ138000 npm[3801]: [2025-10-11 18:16:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.36,"last_seen":1760206566269,"linkquality":58,"power_outage_count":25795,"pressure":991.5,"temperature":22.69,"voltage":2995}'
Oct 11 18:16:06 IQ138000 npm[3801]: [2025-10-11 18:16:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.63,"last_seen":1760206566283,"linkquality":61,"power_outage_count":25795,"pressure":991.5,"temperature":22.69,"voltage":2995}'
Oct 11 18:16:06 IQ138000 npm[3801]: [2025-10-11 18:16:06] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.63,"last_seen":1760206566283,"linkquality":61,"power_outage_count":25795,"pressure":991.1,"temperature":22.69,"voltage":2995}'
Oct 11 18:16:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:16:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:16:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:16:20 IQ138000 NetworkManager[403]: <warn>  [1760206580.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:16:20 IQ138000 NetworkManager[403]: <info>  [1760206580.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:16:20 IQ138000 NetworkManager[403]: <warn>  [1760206580.0300] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:16:20 IQ138000 NetworkManager[403]: <info>  [1760206580.0329] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:16:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/506
Oct 11 18:16:20 IQ138000 NetworkManager[403]: <info>  [1760206580.0847] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:16:20 IQ138000 NetworkManager[403]: <info>  [1760206580.0848] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:16:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:16:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:16:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:16:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:22 IQ138000 npm[3801]: [2025-10-11 18:16:22] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":43.5,"last_seen":1760206582595,"linkquality":61,"power_outage_count":35250,"temperature":23.89,"voltage":3075}'
Oct 11 18:16:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:16:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:16:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:16:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:16:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:16:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:16:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:16:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:16:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:16:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:16:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:16:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:16:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:16:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:16:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:16:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:16:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:16:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:16:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:16:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:16:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:16:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:16:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:16:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:16:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:16:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:16:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:16:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:16:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:16:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:16:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:16:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:16:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:16:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:16:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:16:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:16:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:16:23 IQ138000 wb-watchdog[28215]: [INFO] Interval #720 started. Waiting up to 60 seconds for error...
Oct 11 18:16:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:25 IQ138000 NetworkManager[403]: <info>  [1760206585.6850] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:16:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:16:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 18:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:16:36 IQ138000 npm[3801]: [2025-10-11 18:16:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.63,"last_seen":1760206596891,"linkquality":36,"power_outage_count":25795,"pressure":991.1,"temperature":22.63,"voltage":2995}'
Oct 11 18:16:36 IQ138000 npm[3801]: [2025-10-11 18:16:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.45,"last_seen":1760206596906,"linkquality":40,"power_outage_count":25795,"pressure":991.1,"temperature":22.63,"voltage":2995}'
Oct 11 18:16:36 IQ138000 npm[3801]: [2025-10-11 18:16:36] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.45,"last_seen":1760206596927,"linkquality":40,"power_outage_count":25795,"pressure":991.4,"temperature":22.63,"voltage":2995}'
Oct 11 18:16:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 18:16:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:16:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:16:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:16:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:16:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:16:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:16:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:16:47 IQ138000 npm[3801]: [2025-10-11 18:16:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.45,"last_seen":1760206607314,"linkquality":61,"power_outage_count":25795,"pressure":991.4,"temperature":22.67,"voltage":2995}'
Oct 11 18:16:47 IQ138000 npm[3801]: [2025-10-11 18:16:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.32,"last_seen":1760206607334,"linkquality":61,"power_outage_count":25795,"pressure":991.4,"temperature":22.67,"voltage":2995}'
Oct 11 18:16:47 IQ138000 npm[3801]: [2025-10-11 18:16:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":97,"humidity":51.32,"last_seen":1760206607334,"linkquality":61,"power_outage_count":25795,"pressure":991.2,"temperature":22.67,"voltage":2995}'
Oct 11 18:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:16:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:16:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:16:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:16:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:16:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:16:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:16:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:16:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:16:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:16:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:16:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:16:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:16:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:16:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:16:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:16:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:16:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:16:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:16:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:16:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:16:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:16:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:16:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:16:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:16:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:16:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:16:53 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:16:53 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:16:53 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:16:53 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:16:53 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:16:53 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:16:53 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:16:53 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:16:53 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:16:53 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:16:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:16:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:16:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:01 IQ138000 CRON[28544]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:17:01 IQ138000 CRON[28548]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 11 18:17:01 IQ138000 CRON[28544]: pam_unix(cron:session): session closed for user root
Oct 11 18:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:17:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:03 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:17:03 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:17:04 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 18:17:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:17:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:17:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7639] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7644] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7678] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7765] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7788] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7790] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7893] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7924] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7957] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7961] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7963] Config: added 'scan_ssid' value '1'
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7964] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7965] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.7966] Config: added 'psk' value '<hidden>'
Oct 11 18:17:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/507
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.8685] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:17:20 IQ138000 NetworkManager[403]: <info>  [1760206640.8687] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:17:23 IQ138000 wb-watchdog[28824]: [INFO] Interval #721 started. Waiting up to 60 seconds for error...
Oct 11 18:17:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:23 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:17:23 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:17:23 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:17:23 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:17:23 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:17:23 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:17:23 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:17:23 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:17:23 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:17:23 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:17:23 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:17:23 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:17:23 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:17:23 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:17:23 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:17:23 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:17:23 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:17:23 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:17:23 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:17:23 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:17:23 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:17:23 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:17:23 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:17:23 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:17:23 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:17:23 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:17:23 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:17:23 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:17:23 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:17:23 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:17:23 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:17:23 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:17:23 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:17:23 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:17:23 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:17:23 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:17:23 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:17:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:17:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:17:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:17:38 IQ138000 npm[3801]: [2025-10-11 18:17:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.56,"last_seen":1760206658267,"linkquality":54,"power_outage_count":25795,"pressure":991.2,"temperature":22.66,"voltage":3005}'
Oct 11 18:17:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:41 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:17:41 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:17:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:46 IQ138000 NetworkManager[403]: <warn>  [1760206666.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:17:46 IQ138000 NetworkManager[403]: <info>  [1760206666.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:17:46 IQ138000 NetworkManager[403]: <warn>  [1760206666.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:17:46 IQ138000 NetworkManager[403]: <info>  [1760206666.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:17:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/507
Oct 11 18:17:46 IQ138000 NetworkManager[403]: <info>  [1760206666.0724] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:17:46 IQ138000 NetworkManager[403]: <info>  [1760206666.0726] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:17:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:17:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:52 IQ138000 NetworkManager[403]: <info>  [1760206672.5114] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:17:53 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:17:53 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:17:53 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:17:53 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:17:53 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:17:53 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:17:53 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:17:53 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:17:53 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:17:53 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:17:53 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:17:53 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:17:53 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:17:53 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:17:53 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:17:53 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:17:53 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:17:53 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:17:53 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:17:53 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:17:53 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:17:53 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:17:53 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:17:53 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:17:53 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:17:53 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:17:53 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:17:53 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:17:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:17:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:17:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:17:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:17:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:17:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:17:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:17:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:17:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:17:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:17:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:17:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:17:57 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:17:57 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:17:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:17:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:18:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:18:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:18:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:18:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:23 IQ138000 wb-watchdog[29527]: [INFO] Interval #722 started. Waiting up to 60 seconds for error...
Oct 11 18:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:18:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:18:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:18:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:18:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:18:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:18:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:18:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:18:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:18:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:18:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:18:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:18:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:18:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:18:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:18:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:18:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:18:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:18:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:18:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:18:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:18:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:18:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:18:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:18:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:18:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:18:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:18:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:18:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:18:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:18:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:18:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:18:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:18:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:18:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:18:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:18:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:18:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:18:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:18:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:18:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:18:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:18:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:18:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:18:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:18:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:18:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5387] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5393] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5402] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5465] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5500] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5503] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5595] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5620] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5645] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5649] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5650] Config: added 'scan_ssid' value '1'
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5651] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5652] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.5653] Config: added 'psk' value '<hidden>'
Oct 11 18:18:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/508
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.6362] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:18:47 IQ138000 NetworkManager[403]: <info>  [1760206727.6364] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:18:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:18:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:18:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:18:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:18:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:18:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:18:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:18:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:18:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:18:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:18:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:18:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:18:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:18:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:18:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:18:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:18:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:18:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:18:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:18:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:18:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:18:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:18:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:18:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:18:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:18:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:18:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:18:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:18:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:18:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:18:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:18:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:18:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:18:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:18:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:18:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:18:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:18:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:19:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:19:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:19:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:19:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:13 IQ138000 NetworkManager[403]: <warn>  [1760206753.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:19:13 IQ138000 NetworkManager[403]: <info>  [1760206753.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:19:13 IQ138000 NetworkManager[403]: <warn>  [1760206753.0246] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:19:13 IQ138000 NetworkManager[403]: <info>  [1760206753.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:19:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/508
Oct 11 18:19:13 IQ138000 NetworkManager[403]: <info>  [1760206753.0796] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:19:13 IQ138000 NetworkManager[403]: <info>  [1760206753.0801] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:19:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:19:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:19:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:19:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13570 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:19:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:19 IQ138000 NetworkManager[403]: <info>  [1760206759.3066] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:19:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:23 IQ138000 wb-watchdog[30157]: [INFO] Interval #723 started. Waiting up to 60 seconds for error...
Oct 11 18:19:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:19:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:19:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:19:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:19:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:19:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:19:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:19:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:19:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:19:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:19:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:19:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:19:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:19:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:19:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:19:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:19:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:19:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:19:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:19:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:19:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:19:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:19:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:19:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:19:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:19:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:19:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:19:24 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:19:24 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:19:24 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:19:24 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:19:24 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:19:24 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:19:24 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:19:24 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:19:24 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:19:24 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:19:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:19:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:34 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:19:34 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:19:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:19:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:19:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:19:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:19:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:19:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:19:54 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:19:54 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:19:54 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:19:54 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:19:54 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:19:54 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:19:54 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:19:54 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:19:54 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:19:54 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:19:54 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:19:54 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:19:54 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:19:54 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:19:54 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:19:54 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:19:54 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:19:54 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:19:54 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:19:54 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:19:54 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:19:54 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:19:54 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:19:54 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:19:54 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:19:54 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:19:54 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:19:54 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:19:54 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:19:54 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:19:54 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:19:54 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:19:54 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:19:54 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:19:54 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:19:54 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:19:54 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:19:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:20:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:20:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:20:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:20:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:20:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3386] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3391] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3398] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3453] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3471] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3473] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3559] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3578] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3595] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3599] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3600] Config: added 'scan_ssid' value '1'
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3601] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3602] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.3603] Config: added 'psk' value '<hidden>'
Oct 11 18:20:14 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/509
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.4334] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:20:14 IQ138000 NetworkManager[403]: <info>  [1760206814.4336] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:20:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:20:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:20:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:20:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:20:23 IQ138000 wb-watchdog[30834]: [INFO] Interval #724 started. Waiting up to 60 seconds for error...
Oct 11 18:20:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:24 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:20:24 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:20:24 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:20:24 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:20:24 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:20:24 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:20:24 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:20:24 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:20:24 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:20:24 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:20:24 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:20:24 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:20:24 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:20:24 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:20:24 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:20:24 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:20:24 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:20:24 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:20:24 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:20:24 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:20:24 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:20:24 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:20:24 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:20:24 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:20:24 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:20:24 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:24 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:20:24 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:20:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:20:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:20:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:20:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:20:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:20:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:20:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:20:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:20:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:20:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:20:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:20:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:20:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:20:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:20:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:20:40 IQ138000 NetworkManager[403]: <warn>  [1760206840.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:20:40 IQ138000 NetworkManager[403]: <info>  [1760206840.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:20:40 IQ138000 NetworkManager[403]: <warn>  [1760206840.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:20:40 IQ138000 NetworkManager[403]: <info>  [1760206840.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:20:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:20:40 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/509
Oct 11 18:20:40 IQ138000 NetworkManager[403]: <info>  [1760206840.0675] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:20:40 IQ138000 NetworkManager[403]: <info>  [1760206840.0677] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:20:40 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:20:46 IQ138000 NetworkManager[403]: <info>  [1760206846.0739] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:20:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:20:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:20:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:20:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:20:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:20:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:20:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:20:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:20:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:20:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:20:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:20:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:20:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:20:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:20:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:20:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:20:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:20:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:20:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:20:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:20:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:20:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:20:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:20:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:20:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:20:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:20:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:20:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:20:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:20:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:20:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:20:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:20:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:20:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:20:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:20:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:20:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:20:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:20:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L2, row count 7183, limit 7042
Oct 11 18:20:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:20:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:21:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:21:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:21:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 16968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:21:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:21:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:21:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:21:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:23 IQ138000 wb-watchdog[31464]: [INFO] Interval #725 started. Waiting up to 60 seconds for error...
Oct 11 18:21:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:21:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:21:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:21:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:21:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:21:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:21:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:21:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:21:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:21:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:21:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:21:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:21:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:21:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:21:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:21:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:21:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:21:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:21:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:21:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:21:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:21:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:21:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:21:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:21:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:21:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:21:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:21:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:21:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:21:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:21:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:21:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:21:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:21:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:21:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:21:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:21:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:21:39 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:21:39 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:21:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2061] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2100] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2107] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2156] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2171] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2173] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2298] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2346] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2371] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2375] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2376] Config: added 'scan_ssid' value '1'
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2377] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2379] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:21:41 IQ138000 NetworkManager[403]: <info>  [1760206901.2380] Config: added 'psk' value '<hidden>'
Oct 11 18:21:41 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/510
Oct 11 18:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:21:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:21:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:43 IQ138000 NetworkManager[403]: <info>  [1760206903.3123] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:21:43 IQ138000 NetworkManager[403]: <info>  [1760206903.3125] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:21:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:21:55 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:21:55 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:21:55 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:21:55 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:21:55 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:21:55 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:21:55 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:21:55 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:21:55 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:21:55 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:21:55 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:21:55 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:21:55 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:21:55 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:21:55 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:21:55 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:21:55 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:21:55 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:21:55 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:21:55 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:21:55 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:21:55 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:21:55 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:21:55 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:21:55 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:21:55 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:21:55 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:21:55 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:21:55 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:21:55 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:21:55 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:21:55 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:21:55 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:21:55 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:21:55 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:21:55 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:21:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:56 IQ138000 npm[3801]: [2025-10-11 18:21:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":34.59,"last_seen":1760206916565,"linkquality":83,"power_outage_count":48745,"temperature":27.43,"voltage":3025}'
Oct 11 18:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:21:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:22:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:22:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:22:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:22:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:06 IQ138000 NetworkManager[403]: <warn>  [1760206926.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:22:06 IQ138000 NetworkManager[403]: <info>  [1760206926.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:22:06 IQ138000 NetworkManager[403]: <warn>  [1760206926.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:22:06 IQ138000 NetworkManager[403]: <info>  [1760206926.0258] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:22:06 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/510
Oct 11 18:22:06 IQ138000 NetworkManager[403]: <info>  [1760206926.0662] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:22:06 IQ138000 NetworkManager[403]: <info>  [1760206926.0663] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:22:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:22:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:22:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:22:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:11 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:11 IQ138000 NetworkManager[403]: <info>  [1760206931.9354] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:22:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:22:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:22:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:22:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:23 IQ138000 wb-watchdog[32156]: [INFO] Interval #726 started. Waiting up to 60 seconds for error...
Oct 11 18:22:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:25 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:22:25 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:22:25 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:22:25 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:22:25 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:22:25 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:22:25 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:22:25 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:22:25 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:22:25 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:22:25 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:22:25 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:22:25 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:22:25 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:22:25 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:22:25 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:22:25 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:22:25 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:22:25 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:22:25 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:22:25 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:22:25 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:22:25 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:22:25 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:22:25 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:22:25 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:22:25 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:22:25 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:22:25 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:22:25 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:22:25 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:22:25 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:22:25 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:22:25 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:22:25 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:22:25 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:22:25 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:22:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:33 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:22:33 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:22:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:22:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:22:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:22:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:55 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:22:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:22:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:22:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:22:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:22:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:22:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:22:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:22:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:22:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:22:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:22:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:22:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:22:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:22:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:22:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:22:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:22:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:22:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:22:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:22:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:22:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:22:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:22:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:22:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:22:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:22:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:22:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:22:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:22:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:22:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:22:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:22:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:22:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:22:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:22:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:22:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:22:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:22:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:23:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:23:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:23:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2423] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2428] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2435] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2484] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2502] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2503] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2615] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2636] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2652] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2656] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2657] Config: added 'scan_ssid' value '1'
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2658] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2659] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.2660] Config: added 'psk' value '<hidden>'
Oct 11 18:23:07 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/511
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.3411] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:23:07 IQ138000 NetworkManager[403]: <info>  [1760206987.3414] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:23:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:10 IQ138000 NetworkManager[403]: <info>  [1760206990.8785] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:23:10 IQ138000 NetworkManager[403]: <info>  [1760206990.8788] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:23:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 18:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:23:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8756 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:19 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:23:19 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:19 IQ138000 NetworkManager[403]: <info>  [1760206999.3851] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:23:19 IQ138000 NetworkManager[403]: <info>  [1760206999.3853] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:23:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:23 IQ138000 wb-watchdog[302]: [INFO] Interval #727 started. Waiting up to 60 seconds for error...
Oct 11 18:23:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:23:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:23:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:23:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:23:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:23:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:23:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:23:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:23:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:23:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:23:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:23:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:23:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:23:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:23:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:23:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:23:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:23:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:23:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:23:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:23:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:23:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:23:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:23:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:23:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:23:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:23:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:23:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:23:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:23:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:23:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:23:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:23:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:23:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:23:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:23:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:23:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:23:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:23:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:23:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:32 IQ138000 NetworkManager[403]: <warn>  [1760207012.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:23:32 IQ138000 NetworkManager[403]: <info>  [1760207012.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:23:32 IQ138000 NetworkManager[403]: <warn>  [1760207012.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:23:32 IQ138000 NetworkManager[403]: <info>  [1760207012.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:23:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/511
Oct 11 18:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:32 IQ138000 NetworkManager[403]: <info>  [1760207012.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:23:32 IQ138000 NetworkManager[403]: <info>  [1760207012.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:23:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:23:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L3, row count 7183, limit 7042
Oct 11 18:23:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:23:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:23:38 IQ138000 NetworkManager[403]: <info>  [1760207018.0063] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:23:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:23:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:23:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5382 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:23:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:23:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:23:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:23:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:23:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:23:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:23:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:23:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:23:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:23:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:23:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:23:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:23:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:23:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:23:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:23:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:23:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:23:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:23:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:23:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:23:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:23:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:23:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:23:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:23:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:23:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:23:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:23:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:23:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:23:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:23:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:23:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:23:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:23:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:23:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:23:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:23:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:23:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:23:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:24:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:24:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:24:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:24:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:24:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:24:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:24:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:24:23 IQ138000 wb-watchdog[1038]: [INFO] Interval #728 started. Waiting up to 60 seconds for error...
Oct 11 18:24:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:24:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:24:26 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:24:26 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:24:26 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:24:26 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:24:26 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:24:26 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:24:26 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:24:26 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:24:26 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:24:26 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:24:26 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:24:26 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:24:26 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:24:26 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:24:26 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:24:26 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:24:26 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:24:26 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:24:26 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:24:26 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:24:26 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:24:26 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:24:26 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:24:26 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:24:26 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:24:26 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:24:26 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:24:26 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:24:26 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:24:26 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:24:26 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:24:26 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:24:26 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:24:26 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:24:26 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:24:26 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:24:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:24:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:24:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:24:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9435] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9454] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9462] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9532] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9554] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9556] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9648] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9683] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9707] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9710] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9712] Config: added 'scan_ssid' value '1'
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9714] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9716] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:24:32 IQ138000 NetworkManager[403]: <info>  [1760207072.9717] Config: added 'psk' value '<hidden>'
Oct 11 18:24:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/512
Oct 11 18:24:33 IQ138000 NetworkManager[403]: <info>  [1760207073.0486] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:24:33 IQ138000 NetworkManager[403]: <info>  [1760207073.0490] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:24:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:24:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:24:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:24:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:24:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:56 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:24:56 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:24:56 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:24:56 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:24:56 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:24:56 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:24:56 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:24:56 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:24:56 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:24:56 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:24:56 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:24:56 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:24:56 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:24:56 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:24:56 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:24:56 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:24:56 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:24:56 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:24:56 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:24:56 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:24:56 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:24:56 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:24:56 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:24:56 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:24:56 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:24:56 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:24:56 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:24:56 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:24:56 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:24:56 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:24:56 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:24:56 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:24:56 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:24:56 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:24:56 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:24:56 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:24:56 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:24:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:24:58 IQ138000 NetworkManager[403]: <warn>  [1760207098.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:24:58 IQ138000 NetworkManager[403]: <info>  [1760207098.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:24:58 IQ138000 NetworkManager[403]: <warn>  [1760207098.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:24:58 IQ138000 NetworkManager[403]: <info>  [1760207098.0266] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:24:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/512
Oct 11 18:24:58 IQ138000 NetworkManager[403]: <info>  [1760207098.0768] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:24:58 IQ138000 NetworkManager[403]: <info>  [1760207098.0770] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:24:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:24:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:01 IQ138000 CRON[1374]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:25:01 IQ138000 CRON[1379]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 18:25:01 IQ138000 CRON[1374]: pam_unix(cron:session): session closed for user root
Oct 11 18:25:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:03 IQ138000 NetworkManager[403]: <info>  [1760207103.6958] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:25:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:10 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:25:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:25:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:23 IQ138000 wb-watchdog[1655]: [INFO] Interval #729 started. Waiting up to 60 seconds for error...
Oct 11 18:25:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:26 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:25:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:25:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:25:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:25:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:25:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:25:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:25:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:25:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:25:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:25:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:25:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:25:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:25:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:25:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:25:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:25:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:25:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:25:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:25:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:25:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:25:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:25:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:25:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:25:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:25:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:25:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:25:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:25:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:25:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:25:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:25:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:25:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:25:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:25:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:25:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:25:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:25:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:25:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:25:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:25:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:25:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:25:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 18:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:25:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:25:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:25:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:25:49 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:25:49 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:25:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:25:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:25:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:25:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:25:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:25:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:25:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:25:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:25:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:25:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:25:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:25:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:25:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:25:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:25:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:25:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:25:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:25:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:25:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:25:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:25:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:25:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:25:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:25:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:25:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:25:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:25:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:25:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:25:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:25:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:25:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:25:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:25:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:25:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:25:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:25:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:25:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:25:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:25:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:25:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:25:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:25:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:25:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:25:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8561] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8566] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8573] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8636] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8655] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8657] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8747] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8771] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8788] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8791] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8793] Config: added 'scan_ssid' value '1'
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8795] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8798] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.8799] Config: added 'psk' value '<hidden>'
Oct 11 18:25:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/513
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.9612] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:25:58 IQ138000 NetworkManager[403]: <info>  [1760207158.9614] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:25:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:26:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:26:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:26:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:26:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:26:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:26:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:26:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:26:11 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:26:11 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:26:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:26:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:26:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:23 IQ138000 wb-watchdog[2409]: [INFO] Interval #730 started. Waiting up to 60 seconds for error...
Oct 11 18:26:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:26:24 IQ138000 NetworkManager[403]: <warn>  [1760207184.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:26:24 IQ138000 NetworkManager[403]: <info>  [1760207184.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:26:24 IQ138000 NetworkManager[403]: <warn>  [1760207184.0254] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:26:24 IQ138000 NetworkManager[403]: <info>  [1760207184.0279] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:26:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/513
Oct 11 18:26:24 IQ138000 NetworkManager[403]: <info>  [1760207184.0728] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:26:24 IQ138000 NetworkManager[403]: <info>  [1760207184.0730] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:26:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:26:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:26:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:26:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:26:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:26:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:26:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:26:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:26:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:26:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:26:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:26:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:26:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:26:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:26:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:26:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:26:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:26:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:26:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:26:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:26:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:26:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:26:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:26:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:26:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:26:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:26:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:26:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:26:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:26:27 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:26:27 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:26:27 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:26:27 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:26:27 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:26:27 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:26:27 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:26:27 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:26:27 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:26:27 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:26:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:26:29 IQ138000 NetworkManager[403]: <info>  [1760207189.6530] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:26:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:26:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:26:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:26:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:26:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:26:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:26:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:26:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:26:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:26:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:26:57 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:26:57 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:26:57 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:26:57 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:26:57 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:26:57 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:26:57 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:26:57 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:26:57 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:26:57 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:26:57 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:26:57 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:26:57 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:26:57 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:26:57 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:26:57 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:26:57 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:26:57 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:26:57 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:26:57 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:26:57 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:26:57 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:26:57 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:26:57 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:26:57 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:26:57 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:26:57 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:26:57 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:26:57 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:26:57 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:26:57 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:26:57 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:26:57 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:26:57 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:26:57 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:26:57 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:26:57 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:26:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:00 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:27:00 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:27:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:27:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:27:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:27:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:27:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:27:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:27:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:27:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:27:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:23 IQ138000 wb-watchdog[3049]: [INFO] Interval #731 started. Waiting up to 60 seconds for error...
Oct 11 18:27:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6026] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6030] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6043] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6128] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6156] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6158] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6258] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6277] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6303] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6307] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6308] Config: added 'scan_ssid' value '1'
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6309] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6310] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.6312] Config: added 'psk' value '<hidden>'
Oct 11 18:27:24 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/514
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.7077] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:27:24 IQ138000 NetworkManager[403]: <info>  [1760207244.7080] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:27 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:27:27 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:27:27 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:27:27 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:27:27 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:27:27 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:27:27 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:27:27 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:27:27 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:27:27 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:27:27 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:27:27 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:27:27 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:27:27 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:27:27 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:27:27 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:27:27 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:27:27 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:27:27 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:27:27 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:27:27 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:27:27 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:27:27 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:27:27 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:27:27 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:27:27 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:27 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:27:27 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:27:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:27:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:27:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:27:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:27:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:27:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:27:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:27:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:27:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:27:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:27:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:27:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:27:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:27:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:45 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:27:45 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:27:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:27:50 IQ138000 NetworkManager[403]: <warn>  [1760207270.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:27:50 IQ138000 NetworkManager[403]: <info>  [1760207270.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:27:50 IQ138000 NetworkManager[403]: <warn>  [1760207270.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:27:50 IQ138000 NetworkManager[403]: <info>  [1760207270.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:27:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:27:50 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/514
Oct 11 18:27:50 IQ138000 NetworkManager[403]: <info>  [1760207270.0665] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:27:50 IQ138000 NetworkManager[403]: <info>  [1760207270.0667] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:50 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:27:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:27:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:27:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:27:56 IQ138000 NetworkManager[403]: <info>  [1760207276.3139] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:27:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:27:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:27:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:27:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:27:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:27:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:27:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:27:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:27:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:27:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:27:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:27:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:27:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:27:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:27:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:27:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:27:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:27:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:27:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:27:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:27:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:27:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:27:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:27:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:27:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:27:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:27:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:27:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:27:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:27:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:27:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:27:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:27:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:27:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:27:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:27:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:27:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:27:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:28:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:28:02 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:28:02 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:28:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:28:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:28:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:28:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:28:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:28:23 IQ138000 wb-watchdog[3775]: [INFO] Interval #732 started. Waiting up to 60 seconds for error...
Oct 11 18:28:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:28:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:28:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:28:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:28:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:28:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:28:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:28:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:28:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:28:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:28:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:28:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:28:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:28:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:28:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:28:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:28:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:28:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:28:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:28:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:28:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:28:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:28:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:28:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:28:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:28:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:28:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:28:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:28:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:28:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:28:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:28:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:28:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:28:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:28:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:28:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:28:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:28:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:28:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:28:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:28:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:28:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:28:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:38 IQ138000 npm[3801]: [2025-10-11 18:28:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":34.59,"last_seen":1760207318269,"linkquality":94,"power_outage_count":48745,"temperature":27.57,"voltage":3025}'
Oct 11 18:28:38 IQ138000 npm[3801]: [2025-10-11 18:28:38] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.19,"last_seen":1760207318285,"linkquality":94,"power_outage_count":48745,"temperature":27.57,"voltage":3025}'
Oct 11 18:28:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:28:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3629] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3651] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3658] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3723] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3741] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3905] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3950] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3985] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3991] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3992] Config: added 'scan_ssid' value '1'
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3993] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3994] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:28:51 IQ138000 NetworkManager[403]: <info>  [1760207331.3995] Config: added 'psk' value '<hidden>'
Oct 11 18:28:51 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/515
Oct 11 18:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:28:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:53 IQ138000 NetworkManager[403]: <info>  [1760207333.4805] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:28:53 IQ138000 NetworkManager[403]: <info>  [1760207333.4807] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:28:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:28:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:28:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:28:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:28:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:28:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:28:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:28:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:28:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:28:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:28:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:28:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:28:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:28:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:28:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:28:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:28:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:28:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:28:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:28:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:28:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:28:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:28:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:28:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:28:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:28:58 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:28:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:28:58 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:28:58 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:28:58 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:28:58 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:28:58 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:28:58 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:28:58 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:28:58 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:28:58 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:28:58 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:28:58 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:28:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:29:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:29:01 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:29:01 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:29:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:29:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:29:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:29:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 4676 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:29:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:29:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:29:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:29:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:17 IQ138000 NetworkManager[403]: <warn>  [1760207357.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:29:17 IQ138000 NetworkManager[403]: <info>  [1760207357.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:29:17 IQ138000 NetworkManager[403]: <warn>  [1760207357.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:29:17 IQ138000 NetworkManager[403]: <info>  [1760207357.0264] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:29:17 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/515
Oct 11 18:29:17 IQ138000 NetworkManager[403]: <info>  [1760207357.0775] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:29:17 IQ138000 NetworkManager[403]: <info>  [1760207357.0777] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:29:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:29:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:29:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:23 IQ138000 wb-watchdog[4394]: [INFO] Interval #733 started. Waiting up to 60 seconds for error...
Oct 11 18:29:23 IQ138000 NetworkManager[403]: <info>  [1760207363.1676] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:29:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:28 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:29:28 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:29:28 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:29:28 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:29:28 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:29:28 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:29:28 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:29:28 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:29:28 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:29:28 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:29:28 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:29:28 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:29:28 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:29:28 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:29:28 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:29:28 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:29:28 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:29:28 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:29:28 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:29:28 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:29:28 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:29:28 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:29:28 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:29:28 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:29:28 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:29:28 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:29:28 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:29:28 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:29:28 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:29:28 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:29:28 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:29:28 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:29:28 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:29:28 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:29:28 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:29:28 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:29:28 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:29:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:29:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:29:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:29:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:29:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:29:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:29:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:29:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:29:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:29:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:58 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:29:58 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:29:58 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:29:58 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:29:58 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:29:58 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:29:58 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:29:58 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:29:58 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:29:58 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:29:58 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:29:58 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:29:58 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:29:58 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:29:58 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:29:58 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:29:58 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:29:58 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:29:58 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:29:58 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:29:58 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:29:58 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:29:58 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:29:58 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:58 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:29:58 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:29:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:29:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:29:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:29:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:29:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:29:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:29:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:29:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:29:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:29:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:29:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:29:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:29:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:29:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:29:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:29:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:30:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:30:06 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:30:06 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:30:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:30:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:30:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:30:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2658] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2662] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2668] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2800] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2824] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2826] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.2966] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3007] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3023] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3026] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3027] Config: added 'scan_ssid' value '1'
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3028] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3029] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3030] Config: added 'psk' value '<hidden>'
Oct 11 18:30:18 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/516
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3749] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:30:18 IQ138000 NetworkManager[403]: <info>  [1760207418.3751] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:30:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:30:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:30:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:23 IQ138000 wb-watchdog[5131]: [INFO] Interval #734 started. Waiting up to 60 seconds for error...
Oct 11 18:30:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 13318 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:30:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:30:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:30:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:30:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:30:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:30:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:30:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:30:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:30:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:30:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:30:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:30:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:30:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:30:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:30:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:30:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:30:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:30:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:30:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:30:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:30:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:30:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:30:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:30:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:30:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:30:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:30:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:30:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:30:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:30:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:30:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:30:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:30:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:30:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:30:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:30:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:30:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:30:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:30:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:30:44 IQ138000 NetworkManager[403]: <warn>  [1760207444.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:30:44 IQ138000 NetworkManager[403]: <info>  [1760207444.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:30:44 IQ138000 NetworkManager[403]: <warn>  [1760207444.0243] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:30:44 IQ138000 NetworkManager[403]: <info>  [1760207444.0255] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:30:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:30:44 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/516
Oct 11 18:30:44 IQ138000 NetworkManager[403]: <info>  [1760207444.0705] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:30:44 IQ138000 NetworkManager[403]: <info>  [1760207444.0706] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:30:44 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:30:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:30:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:30:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:30:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:50 IQ138000 NetworkManager[403]: <info>  [1760207450.0274] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:30:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 18:30:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:30:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L2, row count 7183, limit 7042
Oct 11 18:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:30:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:30:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:30:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:30:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:30:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:30:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:30:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:30:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:30:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:30:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:30:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:30:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:30:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:30:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:30:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:30:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:30:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:30:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:30:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:30:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:30:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:30:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:30:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:30:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:30:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:30:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:30:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:30:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:30:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:30:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:30:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:30:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:30:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:30:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:30:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:30:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:30:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:30:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:30:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:31:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:31:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:31:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:31:23 IQ138000 wb-watchdog[5747]: [INFO] Interval #735 started. Waiting up to 60 seconds for error...
Oct 11 18:31:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:31:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:31:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:31:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:31:29 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:31:29 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:31:29 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:31:29 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:31:29 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:31:29 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:31:29 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:31:29 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:31:29 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:31:29 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:31:29 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:31:29 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:31:29 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:31:29 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:31:29 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:31:29 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:31:29 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:31:29 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:31:29 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:31:29 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:31:29 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:31:29 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:31:29 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:31:29 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:31:29 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:31:29 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:31:29 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:31:29 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:31:29 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:31:29 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:31:29 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:31:29 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:31:29 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:31:29 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:31:29 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:31:29 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:31:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:31:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:31:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:31:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:31:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3576] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3602] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3610] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3685] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3705] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3706] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3797] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3818] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3837] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3840] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3841] Config: added 'scan_ssid' value '1'
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3842] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3843] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:31:45 IQ138000 NetworkManager[403]: <info>  [1760207505.3843] Config: added 'psk' value '<hidden>'
Oct 11 18:31:45 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/517
Oct 11 18:31:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:48 IQ138000 NetworkManager[403]: <info>  [1760207508.4985] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:31:48 IQ138000 NetworkManager[403]: <info>  [1760207508.4987] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:31:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:31:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:31:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:31:59 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:31:59 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:31:59 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:31:59 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:31:59 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:31:59 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:31:59 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:31:59 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:31:59 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:31:59 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:31:59 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:31:59 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:31:59 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:31:59 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:31:59 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:31:59 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:31:59 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:31:59 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:31:59 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:31:59 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:31:59 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:31:59 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:31:59 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:31:59 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:31:59 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:31:59 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:31:59 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:31:59 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:31:59 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:31:59 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:31:59 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:31:59 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:31:59 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:31:59 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:31:59 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:31:59 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:31:59 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:31:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:32:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:11 IQ138000 NetworkManager[403]: <warn>  [1760207531.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:32:11 IQ138000 NetworkManager[403]: <info>  [1760207531.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:32:11 IQ138000 NetworkManager[403]: <warn>  [1760207531.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:32:11 IQ138000 NetworkManager[403]: <info>  [1760207531.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:32:11 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/517
Oct 11 18:32:11 IQ138000 NetworkManager[403]: <info>  [1760207531.0674] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:32:11 IQ138000 NetworkManager[403]: <info>  [1760207531.0676] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:32:16 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:17 IQ138000 NetworkManager[403]: <info>  [1760207537.1805] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:32:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:32:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:32:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:32:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:32:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:23 IQ138000 wb-watchdog[6463]: [INFO] Interval #736 started. Waiting up to 60 seconds for error...
Oct 11 18:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:32:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:32:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:32:27 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:32:27 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:29 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:32:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:32:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:32:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:32:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:32:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:32:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:32:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:32:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:32:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:32:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:32:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:32:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:32:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:32:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:32:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:32:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:32:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:32:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:32:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:32:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:32:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:32:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:32:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:32:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:32:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:32:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:32:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:32:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:32:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:32:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:32:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:32:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:32:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:32:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:32:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:32:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:32:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:32:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:32:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:32:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:32:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:32:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:32:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:32:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:32:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:32:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:32:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:32:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:32:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:32:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L3, row count 7183, limit 7042
Oct 11 18:32:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:32:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:32:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:33:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:33:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:33:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:33:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:33:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:33:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:33:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:33:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:33:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:33:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:33:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:33:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:33:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:33:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:33:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:33:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:33:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:33:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:33:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:33:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:33:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:33:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:33:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:33:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:33:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:33:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:33:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:33:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:33:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:33:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:33:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:33:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:33:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:33:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:33:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:33:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:33:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:33:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:33:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:33:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:33:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:33:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:33:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6253] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6257] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6263] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6309] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6328] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6330] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6467] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6494] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6517] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6520] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6522] Config: added 'scan_ssid' value '1'
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6523] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6525] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:33:12 IQ138000 NetworkManager[403]: <info>  [1760207592.6526] Config: added 'psk' value '<hidden>'
Oct 11 18:33:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/518
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:33:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:33:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:33:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:16 IQ138000 NetworkManager[403]: <info>  [1760207596.7466] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:33:16 IQ138000 NetworkManager[403]: <info>  [1760207596.7468] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:33:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:33:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:33:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:33:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:33:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:33:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:23 IQ138000 wb-watchdog[7085]: [INFO] Interval #737 started. Waiting up to 60 seconds for error...
Oct 11 18:33:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:33:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:33:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:33:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:33:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:33:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:33:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:33:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:33:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:33:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:33:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:33:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:33:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:33:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:33:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:33:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:33:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:33:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:33:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:33:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:33:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:33:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:33:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:33:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:33:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:33:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:33:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:33:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:33:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:33:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:33:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:33:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:33:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:33:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:33:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:33:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:33:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:33:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L3, row count 7183, limit 7042
Oct 11 18:33:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:38 IQ138000 NetworkManager[403]: <warn>  [1760207618.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:33:38 IQ138000 NetworkManager[403]: <info>  [1760207618.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:33:38 IQ138000 NetworkManager[403]: <warn>  [1760207618.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:33:38 IQ138000 NetworkManager[403]: <info>  [1760207618.0263] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:33:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/518
Oct 11 18:33:38 IQ138000 NetworkManager[403]: <info>  [1760207618.0734] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:33:38 IQ138000 NetworkManager[403]: <info>  [1760207618.0737] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:44 IQ138000 NetworkManager[403]: <info>  [1760207624.3671] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:33:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:33:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:33:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:33:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:34:00 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:34:00 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:34:00 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:34:00 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:34:00 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:34:00 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:34:00 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:34:00 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:34:00 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:34:00 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:34:00 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:34:00 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:34:00 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:34:00 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:34:00 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:34:00 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:34:00 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:34:00 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:34:00 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:34:00 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:34:00 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:34:00 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:34:00 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:34:00 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:34:00 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:34:00 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:34:00 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:34:00 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:34:00 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:34:00 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:34:00 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:34:00 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:34:00 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:34:00 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:34:00 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:34:00 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:34:00 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:34:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:34:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:34:08 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:34:08 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:34:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:34:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:34:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:34:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:34:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:34:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:34:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:34:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:34:23 IQ138000 wb-watchdog[7796]: [INFO] Interval #738 started. Waiting up to 60 seconds for error...
Oct 11 18:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9498 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:30 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:34:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:30 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:34:30 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:34:30 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:34:30 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:34:30 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:34:30 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:34:30 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:34:30 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:34:30 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:34:30 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:34:30 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:34:30 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:34:30 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:34:30 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:34:30 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:34:30 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:34:30 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:34:30 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:34:30 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:34:30 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:34:30 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:34:30 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:34:30 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:34:30 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:34:30 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:34:30 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:34:30 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:34:30 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:34:30 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:34:30 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:34:30 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:34:30 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:34:30 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:34:30 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:34:30 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:34:30 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:34:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 5144 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:34:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.8769] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.8774] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.8781] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.8854] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.8880] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.8882] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9124] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9157] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9186] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9197] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9199] Config: added 'scan_ssid' value '1'
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9200] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9202] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9203] Config: added 'psk' value '<hidden>'
Oct 11 18:34:39 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/519
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9916] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:34:39 IQ138000 NetworkManager[403]: <info>  [1760207679.9918] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:34:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:34:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:34:53 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:34:53 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:34:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:34:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L3, row count 7183, limit 7042
Oct 11 18:34:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:34:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:35:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:35:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:35:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:35:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:35:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:35:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:35:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:35:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:35:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:35:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:35:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:35:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:35:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:35:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:35:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:35:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:35:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:35:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:35:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:35:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:35:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:35:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:35:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:35:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:35:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:35:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:35:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:35:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:35:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:35:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:35:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:35:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:35:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:35:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:35:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:35:01 IQ138000 CRON[8138]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:35:01 IQ138000 CRON[8142]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 18:35:01 IQ138000 CRON[8138]: pam_unix(cron:session): session closed for user root
Oct 11 18:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:35:05 IQ138000 NetworkManager[403]: <warn>  [1760207705.0217] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:35:05 IQ138000 NetworkManager[403]: <info>  [1760207705.0219] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:35:05 IQ138000 NetworkManager[403]: <warn>  [1760207705.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:35:05 IQ138000 NetworkManager[403]: <info>  [1760207705.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:35:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/519
Oct 11 18:35:05 IQ138000 NetworkManager[403]: <info>  [1760207705.0755] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:35:05 IQ138000 NetworkManager[403]: <info>  [1760207705.0757] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:35:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:07 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:35:07 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:35:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:10 IQ138000 NetworkManager[403]: <info>  [1760207710.6597] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:35:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:35:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:35:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:35:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:17 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:35:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:23 IQ138000 wb-watchdog[8413]: [INFO] Interval #739 started. Waiting up to 60 seconds for error...
Oct 11 18:35:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:35:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:35:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:35:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:35:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:35:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:35:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:35:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:35:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:35:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:35:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:35:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:35:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:35:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:35:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:35:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:35:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:35:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:35:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:35:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:35:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:35:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:35:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:35:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:35:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:35:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:35:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:35:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:35:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:35:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:35:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:35:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:35:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:35:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:35:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:35:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:35:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:35:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:35:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:35:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:35:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:35:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:35:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:35:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:43 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:35:43 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:35:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:35:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:35:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:35:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:35:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:35:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:35:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:36:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:36:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:36:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:36:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:36:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:36:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:36:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:36:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:36:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:36:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:36:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:36:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:36:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:36:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:36:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:36:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:36:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:36:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:36:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:36:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:36:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:36:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:36:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:36:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:36:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:36:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:36:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:36:01 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:36:01 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:36:01 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:36:01 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:36:01 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:36:01 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:36:01 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:36:01 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:36:01 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:36:01 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:36:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7373] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7377] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7383] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7453] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7486] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7488] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7601] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7628] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7664] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7668] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7669] Config: added 'scan_ssid' value '1'
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7670] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7671] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.7672] Config: added 'psk' value '<hidden>'
Oct 11 18:36:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/520
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.8447] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:36:05 IQ138000 NetworkManager[403]: <info>  [1760207765.8461] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:36:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:36:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:36:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:36:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:36:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:36:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:36:23 IQ138000 wb-watchdog[9128]: [INFO] Interval #740 started. Waiting up to 60 seconds for error...
Oct 11 18:36:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:25 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:36:25 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:36:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:36:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:31 IQ138000 NetworkManager[403]: <warn>  [1760207791.0211] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:36:31 IQ138000 NetworkManager[403]: <info>  [1760207791.0213] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:36:31 IQ138000 NetworkManager[403]: <warn>  [1760207791.0281] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:36:31 IQ138000 NetworkManager[403]: <info>  [1760207791.0316] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:36:31 IQ138000 NetworkManager[403]: <info>  [1760207791.0319] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:36:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/520
Oct 11 18:36:31 IQ138000 NetworkManager[403]: <info>  [1760207791.0338] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:36:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:31 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:36:31 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:36:31 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:36:31 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:36:31 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:36:31 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:36:31 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:36:31 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:36:31 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:36:31 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:36:31 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:36:31 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:36:31 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:36:31 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:36:31 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:36:31 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:36:31 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:36:31 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:36:31 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:36:31 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:36:31 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:36:31 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:36:31 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:36:31 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:36:31 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:36:31 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:36:31 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:36:31 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:36:31 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:36:31 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:36:31 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:36:31 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:36:31 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:36:31 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:36:31 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:36:31 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:36:31 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:36:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:32 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:36:37 IQ138000 NetworkManager[403]: <info>  [1760207797.5001] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:36:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:36:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:36:51 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:36:51 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:36:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:36:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:01 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:37:01 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:37:01 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:37:01 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:37:01 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:37:01 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:37:01 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:37:01 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:37:01 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:37:01 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:37:01 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:37:01 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:37:01 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:37:01 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:37:01 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:37:01 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:37:01 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:37:01 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:37:01 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:37:01 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:37:01 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:37:01 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:37:01 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:37:01 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:37:01 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:37:01 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:01 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:37:01 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:37:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:37:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:37:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:37:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:37:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:37:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:37:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:37:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:37:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:37:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:37:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:37:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:37:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:37:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:10 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:37:10 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:37:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:37:13 IQ138000 wpa_supplicant[377]: wlan0: Reject scan trigger since one is already pending
Oct 11 18:37:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:37:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:23 IQ138000 wb-watchdog[9724]: [INFO] Interval #741 started. Waiting up to 60 seconds for error...
Oct 11 18:37:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:37:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:37:32 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:37:32 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:37:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:37:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:37:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:37:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:37:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:37:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:37:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:37:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:37:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:37:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:37:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:37:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:37:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:37:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:37:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:37:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:37:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:37:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:37:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:37:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:37:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:37:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:37:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:37:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:37:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:37:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:37:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:37:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:37:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:37:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:37:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:37:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:37:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:37:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:37:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:37:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6374] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6379] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6385] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6442] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6465] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6467] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6564] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6586] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6606] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6611] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6613] Config: added 'scan_ssid' value '1'
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6614] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6616] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:37:32 IQ138000 NetworkManager[403]: <info>  [1760207852.6617] Config: added 'psk' value '<hidden>'
Oct 11 18:37:32 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/521
Oct 11 18:37:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:37:34 IQ138000 NetworkManager[403]: <info>  [1760207854.7382] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:37:34 IQ138000 NetworkManager[403]: <info>  [1760207854.7399] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:37:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:37:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:37:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:37:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:37:48 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:37:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:37:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:58 IQ138000 NetworkManager[403]: <warn>  [1760207878.0215] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:37:58 IQ138000 NetworkManager[403]: <info>  [1760207878.0217] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:37:58 IQ138000 NetworkManager[403]: <warn>  [1760207878.0247] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:37:58 IQ138000 NetworkManager[403]: <info>  [1760207878.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:37:58 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/521
Oct 11 18:37:58 IQ138000 NetworkManager[403]: <info>  [1760207878.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:37:58 IQ138000 NetworkManager[403]: <info>  [1760207878.0716] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:37:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:37:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:01 IQ138000 CRON[10092]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:38:01 IQ138000 CRON[10096]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 11 18:38:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:38:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:38:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:38:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:38:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:38:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:38:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:38:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:38:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:38:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:38:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:38:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:38:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:38:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:38:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:38:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:38:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:38:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:38:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:38:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:38:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:38:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:38:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:38:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:38:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:38:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:38:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:38:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:38:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:38:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:38:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:38:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:38:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:38:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:38:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:38:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:38:04 IQ138000 NetworkManager[403]: <info>  [1760207884.4842] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:38:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:38:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:07 IQ138000 sSMTP[10124]: Unable to locate mail
Oct 11 18:38:07 IQ138000 sSMTP[10124]: Cannot open mail:25
Oct 11 18:38:07 IQ138000 cron[10124]: sendmail: Cannot open mail:25
Oct 11 18:38:07 IQ138000 CRON[10092]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 11 18:38:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:07 IQ138000 CRON[10092]: pam_unix(cron:session): session closed for user root
Oct 11 18:38:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:38:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:38:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:38:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:38:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:38:20 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:38:20 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:38:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 13696 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:23 IQ138000 wb-watchdog[10451]: [INFO] Interval #742 started. Waiting up to 60 seconds for error...
Oct 11 18:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:38:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:38:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:38:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:38:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:38:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:38:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:38:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:38:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:38:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:38:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:38:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:38:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:38:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:38:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:38:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:38:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:38:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:38:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:38:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:38:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:38:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:38:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:38:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:38:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:38:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:38:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:38:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:38:32 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:38:32 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:38:32 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:38:32 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:38:32 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:38:32 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:38:32 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:38:32 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:38:32 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:38:32 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:38:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:38:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:38:38 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:38:38 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:38:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:38:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:38:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:38:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:38:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:38:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:38:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:38:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L2, row count 7183, limit 7042
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5638] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5650] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5657] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5721] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5747] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5749] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5832] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5851] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5870] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5873] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5874] Config: added 'scan_ssid' value '1'
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5875] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5877] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.5878] Config: added 'psk' value '<hidden>'
Oct 11 18:38:59 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/522
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.6588] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:38:59 IQ138000 NetworkManager[403]: <info>  [1760207939.6590] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:38:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:02 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:39:02 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:39:02 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:39:02 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:39:02 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:39:02 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:39:02 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:39:02 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:39:02 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:39:02 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:39:02 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:39:02 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:39:02 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:39:02 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:39:02 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:39:02 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:39:02 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:39:02 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:39:02 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:39:02 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:39:02 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:39:02 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:39:02 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:39:02 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:39:02 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:39:02 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:39:02 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:39:02 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:39:02 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:39:02 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:39:02 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:39:02 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:39:02 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:39:02 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:39:02 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:39:02 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:39:02 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:39:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:39:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:39:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:39:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:17 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:39:17 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:39:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:39:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:23 IQ138000 wb-watchdog[11067]: [INFO] Interval #743 started. Waiting up to 60 seconds for error...
Oct 11 18:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:25 IQ138000 NetworkManager[403]: <warn>  [1760207965.0209] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:39:25 IQ138000 NetworkManager[403]: <info>  [1760207965.0211] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:39:25 IQ138000 NetworkManager[403]: <warn>  [1760207965.0241] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:39:25 IQ138000 NetworkManager[403]: <info>  [1760207965.0254] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:39:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:39:25 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/522
Oct 11 18:39:25 IQ138000 NetworkManager[403]: <info>  [1760207965.0774] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:39:25 IQ138000 NetworkManager[403]: <info>  [1760207965.0776] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:39:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:25 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:39:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:39:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:39:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:39:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:31 IQ138000 NetworkManager[403]: <info>  [1760207971.3370] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:39:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:32 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:39:32 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:39:32 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:39:32 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:39:32 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:39:32 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:39:32 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:39:32 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:39:32 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:39:32 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:39:32 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:39:32 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:39:32 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:39:32 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:39:32 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:39:32 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:39:32 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:39:32 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:39:32 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:39:32 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:39:32 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:39:32 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:39:32 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:39:32 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:39:32 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:39:32 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:39:32 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:39:32 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:39:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:39:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:39:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:39:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:39:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:39:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:39:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:39:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:39:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:39:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:39:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:39:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:39:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:39:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:39:44 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:39:44 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:39:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:39:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:39:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:39:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:39:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:40:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:40:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:40:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:40:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:40:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:40:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:40:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:40:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:40:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:40:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:40:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:40:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:40:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:40:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:40:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:40:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:40:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:40:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:40:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:40:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:40:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:40:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:40:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:40:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:40:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:40:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:40:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:40:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:40:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:40:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:40:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:40:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:40:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:40:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:40:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:40:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:40:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:40:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:40:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:40:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:40:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:40:16 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:40:16 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:40:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:40:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:40:23 IQ138000 wb-watchdog[11754]: [INFO] Interval #744 started. Waiting up to 60 seconds for error...
Oct 11 18:40:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:40:23 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:40:23 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:40:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:40:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5281] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5290] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5297] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5352] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5369] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5370] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5454] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5473] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5491] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5495] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5496] Config: added 'scan_ssid' value '1'
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5498] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5500] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:40:26 IQ138000 NetworkManager[403]: <info>  [1760208026.5501] Config: added 'psk' value '<hidden>'
Oct 11 18:40:26 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/523
Oct 11 18:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:29 IQ138000 NetworkManager[403]: <info>  [1760208029.6290] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:40:29 IQ138000 NetworkManager[403]: <info>  [1760208029.6292] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:40:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:40:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:40:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:40:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:40:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:40:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:40:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:40:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:40:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:40:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:40:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:40:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:40:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:40:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:40:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:40:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:40:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:40:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:40:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:40:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:40:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:40:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:40:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:40:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:40:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:40:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:40:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:40:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:40:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:40:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:40:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:40:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:40:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:40:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:40:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:40:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:40:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:40:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:40:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:40:36 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:40:36 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:40:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:52 IQ138000 NetworkManager[403]: <warn>  [1760208052.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:40:52 IQ138000 NetworkManager[403]: <info>  [1760208052.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:40:52 IQ138000 NetworkManager[403]: <warn>  [1760208052.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:40:52 IQ138000 NetworkManager[403]: <info>  [1760208052.0260] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:40:52 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/523
Oct 11 18:40:52 IQ138000 NetworkManager[403]: <info>  [1760208052.0700] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:40:52 IQ138000 NetworkManager[403]: <info>  [1760208052.0701] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:40:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:40:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:40:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:40:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:40:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:40:58 IQ138000 NetworkManager[403]: <info>  [1760208058.3134] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:40:59 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:40:59 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:40:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:41:03 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:41:03 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:41:03 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:41:03 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:41:03 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:41:03 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:41:03 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:41:03 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:41:03 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:41:03 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:41:03 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:41:03 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:41:03 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:41:03 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:41:03 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:41:03 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:41:03 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:41:03 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:41:03 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:41:03 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:41:03 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:41:03 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:41:03 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:41:03 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:41:03 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:41:03 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:41:03 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:41:03 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:41:03 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:41:03 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:41:03 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:41:03 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:41:03 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:41:03 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:41:03 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:41:03 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:41:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:41:09 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:41:09 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:41:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:41:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:41:14 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:41:14 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:41:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:41:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:41:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:23 IQ138000 wb-watchdog[12376]: [INFO] Interval #745 started. Waiting up to 60 seconds for error...
Oct 11 18:41:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:41:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:41:28 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:41:28 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:41:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 4287 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:41:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:33 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:41:33 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:41:33 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:41:33 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:41:33 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:41:33 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:41:33 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:41:33 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:41:33 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:41:33 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:41:33 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:41:33 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:41:33 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:41:33 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:41:33 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:41:33 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:41:33 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:41:33 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:41:33 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:41:33 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:41:33 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:41:33 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:41:33 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:41:33 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:41:33 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:41:33 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:41:33 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:41:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:33 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:41:33 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:41:33 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:41:33 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:41:33 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:41:33 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:41:33 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:41:33 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:41:33 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:41:33 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:41:37 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:41:37 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:41:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:41:50 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:41:50 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:41:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3126] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3149] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3156] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3239] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3261] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3263] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3352] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3378] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3401] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3405] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3406] Config: added 'scan_ssid' value '1'
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3407] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3408] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.3409] Config: added 'psk' value '<hidden>'
Oct 11 18:41:53 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/524
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.4179] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:41:53 IQ138000 NetworkManager[403]: <info>  [1760208113.4181] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:41:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:41:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:41:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:41:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:42:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:42:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:03 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:42:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:42:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:42:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:42:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:42:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:42:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:42:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:42:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:42:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:42:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:42:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:42:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:42:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:42:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:42:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:42:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:42:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:42:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:42:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:42:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:42:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:42:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:42:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:42:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:42:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:42:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:42:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:42:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:42:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:42:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:42:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:42:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:42:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:42:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:42:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:42:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:42:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:42:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:42:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:42:19 IQ138000 NetworkManager[403]: <warn>  [1760208139.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:42:19 IQ138000 NetworkManager[403]: <info>  [1760208139.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:42:19 IQ138000 NetworkManager[403]: <warn>  [1760208139.0244] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:42:19 IQ138000 NetworkManager[403]: <info>  [1760208139.0256] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:42:19 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:42:19 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/524
Oct 11 18:42:19 IQ138000 NetworkManager[403]: <info>  [1760208139.0714] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:42:19 IQ138000 NetworkManager[403]: <info>  [1760208139.0717] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:42:19 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:42:23 IQ138000 wb-watchdog[13076]: [INFO] Interval #746 started. Waiting up to 60 seconds for error...
Oct 11 18:42:25 IQ138000 NetworkManager[403]: <info>  [1760208145.0700] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:42:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:42:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:42:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:42:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:42:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:42:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:42:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:42:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:42:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:42:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:42:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:42:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:42:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:42:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:42:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:42:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:42:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:42:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:42:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:42:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:42:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:42:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:42:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:42:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:42:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:42:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:42:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:42:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:42:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:42:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:42:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:42:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:42:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:42:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:42:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:42:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:42:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:42:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:42:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:42:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:42:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:42:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:42:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:42:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:42:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:42:55 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:42:55 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:43:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:43:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:43:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:43:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:43:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:43:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:43:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:43:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:43:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:43:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:43:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:43:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:43:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:43:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:43:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:43:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:43:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:43:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:43:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:43:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:43:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:43:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:43:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:43:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:43:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:43:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:43:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:43:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:43:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:43:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:43:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:43:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:43:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:43:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:43:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:43:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:43:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:43:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:43:15 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:43:15 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:43:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:43:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4582] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4587] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4616] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4786] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4838] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4841] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.4991] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5021] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5040] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5044] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5045] Config: added 'scan_ssid' value '1'
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5046] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5047] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:43:20 IQ138000 NetworkManager[403]: <info>  [1760208200.5048] Config: added 'psk' value '<hidden>'
Oct 11 18:43:20 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/525
Oct 11 18:43:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 4 input(s) @ 8780 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:43:23 IQ138000 wb-watchdog[13685]: [INFO] Interval #747 started. Waiting up to 60 seconds for error...
Oct 11 18:43:23 IQ138000 NetworkManager[403]: <info>  [1760208203.5946] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:43:23 IQ138000 NetworkManager[403]: <info>  [1760208203.5948] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:43:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:24 IQ138000 npm[3801]: [2025-10-11 18:43:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":51.56,"last_seen":1760208204673,"linkquality":58,"power_outage_count":25795,"pressure":991.2,"temperature":22.29,"voltage":3005}'
Oct 11 18:43:24 IQ138000 npm[3801]: [2025-10-11 18:43:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.09,"last_seen":1760208204691,"linkquality":61,"power_outage_count":25795,"pressure":991.2,"temperature":22.29,"voltage":3005}'
Oct 11 18:43:24 IQ138000 npm[3801]: [2025-10-11 18:43:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.09,"last_seen":1760208204691,"linkquality":61,"power_outage_count":25795,"pressure":990.9,"temperature":22.29,"voltage":3005}'
Oct 11 18:43:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:43:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:34 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:43:34 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:43:34 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:43:34 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:43:34 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:43:34 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:43:34 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:43:34 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:43:34 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:43:34 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:43:34 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:43:34 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:43:34 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:43:34 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:43:34 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:43:34 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:43:34 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:43:34 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:43:34 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:43:34 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:43:34 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:43:34 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:43:34 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:43:34 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:43:34 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:43:34 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:43:34 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:43:34 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:43:34 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:43:34 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:43:34 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:43:34 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:43:34 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:43:34 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:43:34 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:43:34 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:43:34 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:43:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:37 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L2, row count 7183, limit 7042
Oct 11 18:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:43:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:43:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:46 IQ138000 NetworkManager[403]: <warn>  [1760208226.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:43:46 IQ138000 NetworkManager[403]: <info>  [1760208226.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:43:46 IQ138000 NetworkManager[403]: <warn>  [1760208226.0249] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:43:46 IQ138000 NetworkManager[403]: <info>  [1760208226.0277] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:43:46 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/525
Oct 11 18:43:46 IQ138000 NetworkManager[403]: <info>  [1760208226.0725] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:43:46 IQ138000 NetworkManager[403]: <info>  [1760208226.0727] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:43:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:43:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:43:52 IQ138000 NetworkManager[403]: <info>  [1760208232.1845] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:43:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:44:04 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:44:04 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:44:04 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:44:04 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:44:04 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:44:04 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:44:04 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:44:04 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:44:04 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:44:04 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:44:04 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:44:04 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:44:04 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:44:04 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:44:04 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:44:04 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:44:04 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:44:04 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:44:04 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:44:04 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:44:04 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:44:04 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:44:04 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:44:04 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:44:04 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:44:04 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:44:04 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:44:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:04 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:44:04 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:44:04 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:44:04 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:44:04 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:44:04 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:44:04 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:44:04 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:44:04 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:44:04 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:44:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:05 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:44:05 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:44:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:44:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:44:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 18:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:44:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:44:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:44:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:44:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:44:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:44:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:22 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:44:22 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:44:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:23 IQ138000 wb-watchdog[14402]: [INFO] Interval #748 started. Waiting up to 60 seconds for error...
Oct 11 18:44:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:44:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:44:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:44:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:44:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:44:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:44:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:44:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:44:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:44:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:44:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:44:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:44:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:44:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:44:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:44:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:44:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:44:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:44:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:44:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:44:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:44:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:44:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:44:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:44:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:44:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:44:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:44:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:44:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:44:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:44:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:44:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:44:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:44:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:44:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:44:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:44:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:44:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:44:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:40 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:44:40 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:44:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:44:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:44:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2070] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2086] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2093] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2214] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2231] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2233] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2323] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2349] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2369] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2373] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2374] Config: added 'scan_ssid' value '1'
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2375] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2377] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.2378] Config: added 'psk' value '<hidden>'
Oct 11 18:44:47 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/526
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.3172] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:44:47 IQ138000 NetworkManager[403]: <info>  [1760208287.3175] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:44:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:44:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:44:51 IQ138000 npm[3801]: [2025-10-11 18:44:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":38.19,"last_seen":1760208291959,"linkquality":91,"power_outage_count":48745,"temperature":28.11,"voltage":3025}'
Oct 11 18:44:51 IQ138000 npm[3801]: [2025-10-11 18:44:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":37.52,"last_seen":1760208291969,"linkquality":91,"power_outage_count":48745,"temperature":28.11,"voltage":3025}'
Oct 11 18:44:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:45:01 IQ138000 CRON[14733]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 18:45:01 IQ138000 CRON[14737]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 18:45:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:01 IQ138000 CRON[14733]: pam_unix(cron:session): session closed for user root
Oct 11 18:45:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:45:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:45:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:45:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:45:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:45:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:45:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:45:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:45:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:45:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:45:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:45:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:45:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:45:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:45:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:45:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:45:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:45:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:45:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:45:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:45:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:45:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:45:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:45:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:45:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:45:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:45:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:45:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:45:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:45:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:45:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:45:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:45:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:45:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:45:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:45:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:45:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:45:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:45:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:45:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:45:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 NetworkManager[403]: <warn>  [1760208312.0218] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:45:12 IQ138000 NetworkManager[403]: <info>  [1760208312.0221] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:45:12 IQ138000 NetworkManager[403]: <warn>  [1760208312.0464] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:45:12 IQ138000 NetworkManager[403]: <info>  [1760208312.0473] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:45:12 IQ138000 NetworkManager[403]: <info>  [1760208312.0474] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:45:12 IQ138000 NetworkManager[403]: <info>  [1760208312.0496] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:45:12 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/526
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:45:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 18:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 18:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:45:17 IQ138000 NetworkManager[403]: <info>  [1760208317.9512] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:45:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:22 IQ138000 wpa_supplicant[377]: wlan1: Reject scan trigger since one is already pending
Oct 11 18:45:23 IQ138000 wb-watchdog[15006]: [INFO] Interval #749 started. Waiting up to 60 seconds for error...
Oct 11 18:45:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:45:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:45:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:45:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:45:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:45:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:45:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:45:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:45:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:45:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:45:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:45:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:45:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:45:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:45:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:45:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:45:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:45:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:45:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:45:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:45:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:45:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:45:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:45:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:45:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:45:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:45:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:45:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:45:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:45:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:45:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:45:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:45:35 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:45:35 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:45:35 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:45:35 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:45:35 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:45:35 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:45:35 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:45:35 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:45:35 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:45:35 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:45:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:45:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 18176 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:45:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:45:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:45:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:45:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:45:56 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:45:56 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:45:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:45:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:05 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:46:05 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:46:05 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:46:05 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:46:05 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:46:05 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:46:05 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:46:05 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:46:05 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:46:05 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:46:05 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:46:05 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:46:05 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:46:05 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:46:05 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:46:05 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:46:05 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:46:05 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:46:05 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:46:05 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:46:05 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:46:05 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:46:05 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:46:05 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:46:05 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:46:05 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:46:05 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:46:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:05 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:46:05 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:46:05 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:46:05 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:46:05 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:46:05 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:46:05 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:46:05 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:46:05 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:46:05 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9538] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9543] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9552] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9627] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9665] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9668] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9838] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9859] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9878] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9882] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9883] Config: added 'scan_ssid' value '1'
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9884] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9885] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:46:12 IQ138000 NetworkManager[403]: <info>  [1760208372.9886] Config: added 'psk' value '<hidden>'
Oct 11 18:46:13 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/527
Oct 11 18:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:46:13 IQ138000 NetworkManager[403]: <info>  [1760208373.0734] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:46:13 IQ138000 NetworkManager[403]: <info>  [1760208373.0736] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:46:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 input(s) @ 12477 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:46:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:46:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:46:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:46:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:46:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:46:23 IQ138000 wb-watchdog[15709]: [INFO] Interval #750 started. Waiting up to 60 seconds for error...
Oct 11 18:46:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:46:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:46:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:46:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:46:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:35 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:46:35 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:46:35 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:46:35 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:46:35 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:46:35 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:46:35 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:46:35 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:46:35 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:46:35 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:46:35 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:46:35 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:46:35 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:46:35 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:46:35 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:46:35 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:46:35 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:46:35 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:46:35 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:46:35 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:46:35 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:46:35 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:46:35 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:46:35 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:46:35 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:46:35 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:46:35 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:46:35 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:46:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:46:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:46:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:46:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:46:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:46:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:46:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:46:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:46:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:46:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:46:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:46:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:46:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:46:38 IQ138000 NetworkManager[403]: <warn>  [1760208398.0222] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:46:38 IQ138000 NetworkManager[403]: <info>  [1760208398.0224] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:46:38 IQ138000 NetworkManager[403]: <warn>  [1760208398.0250] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:46:38 IQ138000 NetworkManager[403]: <info>  [1760208398.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:46:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/527
Oct 11 18:46:38 IQ138000 NetworkManager[403]: <info>  [1760208398.0701] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:46:38 IQ138000 NetworkManager[403]: <info>  [1760208398.0703] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:46:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17422 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:46:43 IQ138000 NetworkManager[403]: <info>  [1760208403.6881] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:46:46 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:46 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:46:46 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:46:47 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:48 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:46:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:46:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:46:53 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:54 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:46:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:46:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:46:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:47:04 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:47:04 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:47:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:47:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:47:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:47:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:47:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:47:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:47:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:47:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:47:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:47:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:47:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:47:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:47:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:47:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:47:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:47:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:47:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:47:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:47:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:47:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:47:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:47:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:47:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:47:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:47:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:47:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:47:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:47:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:47:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:47:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:47:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:47:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:47:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:47:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:08 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:47:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:47:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:47:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:17 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:47:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:19 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:47:20 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:23 IQ138000 wb-watchdog[16321]: [INFO] Interval #751 started. Waiting up to 60 seconds for error...
Oct 11 18:47:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:47:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:47:31 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:47:33 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:47:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:47:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:47:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:47:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:47:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:47:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:47:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:47:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:47:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:47:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:47:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:47:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:47:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:47:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:47:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:47:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:47:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:47:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:47:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:47:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:47:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:47:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:47:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:47:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:47:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:47:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:47:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:47:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:47:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:47:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:47:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:47:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:47:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:47:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:47:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:47:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:47:37 IQ138000 npm[3801]: [2025-10-11 18:47:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":48.09,"last_seen":1760208457538,"linkquality":47,"power_outage_count":25795,"pressure":990.9,"temperature":22.24,"voltage":3005}'
Oct 11 18:47:37 IQ138000 npm[3801]: [2025-10-11 18:47:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":47.87,"last_seen":1760208457560,"linkquality":43,"power_outage_count":25795,"pressure":990.9,"temperature":22.24,"voltage":3005}'
Oct 11 18:47:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:37 IQ138000 npm[3801]: [2025-10-11 18:47:37] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":47.87,"last_seen":1760208457581,"linkquality":40,"power_outage_count":25795,"pressure":991.3,"temperature":22.24,"voltage":3005}'
Oct 11 18:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7025] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7029] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7035] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7092] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7114] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7116] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7200] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7220] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7239] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7242] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7244] Config: added 'scan_ssid' value '1'
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7245] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7246] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.7247] Config: added 'psk' value '<hidden>'
Oct 11 18:47:38 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/528
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.8030] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:47:38 IQ138000 NetworkManager[403]: <info>  [1760208458.8033] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:47:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:39 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:40 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:49 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:56 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:57 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:47:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:48:02 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:48:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:48:03 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:04 IQ138000 NetworkManager[403]: <warn>  [1760208484.0216] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:48:04 IQ138000 NetworkManager[403]: <info>  [1760208484.0218] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:48:04 IQ138000 NetworkManager[403]: <warn>  [1760208484.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:48:04 IQ138000 NetworkManager[403]: <info>  [1760208484.0261] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:48:04 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/528
Oct 11 18:48:04 IQ138000 NetworkManager[403]: <info>  [1760208484.0812] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:48:04 IQ138000 NetworkManager[403]: <info>  [1760208484.0815] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:48:04 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:48:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:48:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:48:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:48:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:48:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:48:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:48:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:48:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:48:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:48:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:48:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:48:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:48:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:48:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:48:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:48:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:48:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:48:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:48:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:48:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:48:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:48:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:48:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:48:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:48:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:48:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:48:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:48:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:06 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:48:06 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:48:06 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:48:06 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:48:06 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:48:06 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:48:06 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:48:06 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:48:06 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:48:06 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:48:09 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 18:48:10 IQ138000 NetworkManager[403]: <info>  [1760208490.5124] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8646 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 18:48:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 18:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:48:12 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:48:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 18:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:48:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:15 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:16 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:48:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:21 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:48:21 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:48:23 IQ138000 wb-watchdog[17029]: [INFO] Interval #752 started. Waiting up to 60 seconds for error...
Oct 11 18:48:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 8708 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:26 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 13322 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:30 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 6 input(s) @ 17170 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:31 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:34 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:36 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:48:36 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:48:36 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:48:36 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:48:36 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:48:36 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:48:36 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:48:36 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:48:36 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:48:36 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:48:36 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:48:36 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:48:36 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:48:36 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:48:36 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:48:36 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:48:36 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:48:36 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:48:36 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:48:36 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:48:36 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:48:36 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:48:36 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:48:36 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:48:36 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:48:36 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:48:36 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:48:36 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:48:36 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:48:36 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:48:36 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:48:36 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:48:36 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:48:36 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:48:36 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:48:36 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:48:36 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:37 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 18:48:38 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 18:48:41 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 16536 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:42 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:42 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:48:42 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:48:43 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:44 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:45 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:50 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:48:51 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 18:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:52 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:48:55 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:57 IQ138000 wb-mqtt-db[2041]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L1, row count 7183, limit 7042
Oct 11 18:48:58 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:48:58 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:48:58 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:48:59 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 16 input(s) @ 4648 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:00 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:01 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5507] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5512] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8646 uid=0 result="success"
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5531] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5593] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5640] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5645] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5744] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5768] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 18:49:05 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5796] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5814] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5815] Config: added 'scan_ssid' value '1'
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5816] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5817] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.5818] Config: added 'psk' value '<hidden>'
Oct 11 18:49:05 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/529
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.6574] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 18:49:05 IQ138000 NetworkManager[403]: <info>  [1760208545.6576] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 18:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:06 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:49:06 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:49:06 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:49:06 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:49:06 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:49:06 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:49:06 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:49:06 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:49:06 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:49:06 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:49:06 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:49:06 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:49:06 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:49:06 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:49:06 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:49:06 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:49:06 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:49:06 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:49:06 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:49:06 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:49:06 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:49:06 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:49:06 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:49:06 IQ138000 python3[2000]:            |       sim slot paths: slot 1: none
Oct 11 18:49:06 IQ138000 python3[2000]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/3 (active)
Oct 11 18:49:06 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:06 IQ138000 python3[2000]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/3
Oct 11 18:49:06 IQ138000 python3[2000]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:49:06 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:07 IQ138000 python3[2000]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/3" выполнена. Результат:
Oct 11 18:49:07 IQ138000 python3[2000]:    -------------------------------
Oct 11 18:49:07 IQ138000 python3[2000]:   General    |              path: /org/freedesktop/ModemManager1/SIM/3
Oct 11 18:49:07 IQ138000 python3[2000]:   -------------------------------
Oct 11 18:49:07 IQ138000 python3[2000]:   Properties |            active: yes
Oct 11 18:49:07 IQ138000 python3[2000]:              |              imsi: 250207496118656
Oct 11 18:49:07 IQ138000 python3[2000]:              |             iccid: 89701206289022194789
Oct 11 18:49:07 IQ138000 python3[2000]:              |       operator id: 25020
Oct 11 18:49:07 IQ138000 python3[2000]:              |     operator name: t2
Oct 11 18:49:07 IQ138000 python3[2000]:              |              gid1: FFFF
Oct 11 18:49:07 IQ138000 python3[2000]:              |              gid2: FFFF
Oct 11 18:49:07 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:49:10 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:11 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 18:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:12 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:49:13 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:49:14 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:49:18 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:49:18 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:49:18 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 18:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:49:21 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:22 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 18:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 18:49:23 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:23 IQ138000 wb-watchdog[17651]: [INFO] Interval #753 started. Waiting up to 60 seconds for error...
Oct 11 18:49:24 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:25 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:49:27 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:28 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:49:29 IQ138000 wb-mqtt-serial[1672]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 18:49:31 IQ138000 NetworkManager[403]: <warn>  [1760208571.0213] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 18:49:31 IQ138000 NetworkManager[403]: <info>  [1760208571.0215] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 18:49:31 IQ138000 NetworkManager[403]: <warn>  [1760208571.0248] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 18:49:31 IQ138000 NetworkManager[403]: <info>  [1760208571.0262] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 18:49:31 IQ138000 wb-mqtt-nm-helper[2091]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/529
Oct 11 18:49:31 IQ138000 NetworkManager[403]: <info>  [1760208571.0707] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 18:49:31 IQ138000 NetworkManager[403]: <info>  [1760208571.0709] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 18:49:32 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 18:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 18:49:35 IQ138000 wb-mqtt-serial[1672]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 18:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 18:49:35 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:36 IQ138000 wb-mqtt-serial[1672]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 18:49:37 IQ138000 python3[2000]: Выполнение: mmcli -m wbc
Oct 11 18:49:37 IQ138000 python3[2000]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 18:49:37 IQ138000 python3[2000]:    --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/3
Oct 11 18:49:37 IQ138000 python3[2000]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   Hardware |         manufacturer: INCORPORATED
Oct 11 18:49:37 IQ138000 python3[2000]:            |                model: A7602E-H
Oct 11 18:49:37 IQ138000 python3[2000]:            |    firmware revision: A50C4B08A7600M7
Oct 11 18:49:37 IQ138000 python3[2000]:            |            supported: gsm-umts
Oct 11 18:49:37 IQ138000 python3[2000]:            |              current: gsm-umts
Oct 11 18:49:37 IQ138000 python3[2000]:            |         equipment id: 860803062234204
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   System   |               device: wbc
Oct 11 18:49:37 IQ138000 python3[2000]:            |              drivers: option, rndis_host
Oct 11 18:49:37 IQ138000 python3[2000]:            |               plugin: simtech
Oct 11 18:49:37 IQ138000 python3[2000]:            |         primary port: ttyUSB1
Oct 11 18:49:37 IQ138000 python3[2000]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 18:49:37 IQ138000 python3[2000]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 18:49:37 IQ138000 python3[2000]:            |                state: connected
Oct 11 18:49:37 IQ138000 python3[2000]:            |          power state: on
Oct 11 18:49:37 IQ138000 python3[2000]:            |          access tech: lte
Oct 11 18:49:37 IQ138000 python3[2000]:            |       signal quality: 100% (recent)
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 18:49:37 IQ138000 python3[2000]:            |              current: allowed: any; preferred: none
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
Oct 11 18:49:37 IQ138000 python3[2000]:   3GPP     |                 imei: 860803062234204
Oct 11 18:49:37 IQ138000 python3[2000]:            |          operator id: 25020
Oct 11 18:49:37 IQ138000 python3[2000]:            |        operator name: t2
Oct 11 18:49:37 IQ138000 python3[2000]:            |         registration: home
Oct 11 18:49:37 IQ138000 python3[2000]:            | packet service state: attached
Oct 11 18:49:37 IQ138000 python3[2000]:   --------------------------------
-- Boot e0a81678a0d14fd0b88d24404da5d463 --
Oct 11 22:59:14 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 22:59:14 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 22:59:14 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 22:59:14 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 22:59:14 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 22:59:14 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 22:59:14 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 22:59:14 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 22:59:14 IQ138000 kernel: Zone ranges:
Oct 11 22:59:14 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 22:59:14 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 22:59:14 IQ138000 kernel: Movable zone start for each node
Oct 11 22:59:14 IQ138000 kernel: Early memory node ranges
Oct 11 22:59:14 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 22:59:14 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 22:59:14 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 22:59:14 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 22:59:14 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 22:59:14 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 22:59:14 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 22:59:14 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 22:59:14 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 22:59:14 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 22:59:14 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 22:59:14 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 22:59:14 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 22:59:14 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 22:59:14 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 22:59:14 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 22:59:14 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 22:59:14 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 22:59:14 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 22:59:14 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 22:59:14 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 22:59:14 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 22:59:14 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 22:59:14 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 22:59:14 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 22:59:14 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 22:59:14 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 22:59:14 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 22:59:14 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 22:59:14 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 22:59:14 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 22:59:14 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 22:59:14 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 22:59:14 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 22:59:14 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 22:59:14 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 22:59:14 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 22:59:14 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 22:59:14 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 22:59:14 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 22:59:14 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 22:59:14 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 22:59:14 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 22:59:14 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 22:59:14 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 22:59:14 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 22:59:14 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 22:59:14 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 22:59:14 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 22:59:14 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 22:59:14 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 22:59:14 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 22:59:14 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 22:59:14 IQ138000 kernel: devtmpfs: initialized
Oct 11 22:59:14 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 22:59:14 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 22:59:14 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 22:59:14 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 22:59:14 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 22:59:14 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 22:59:14 IQ138000 kernel: No ATAGs?
Oct 11 22:59:14 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 22:59:14 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 22:59:14 IQ138000 kernel: SCSI subsystem initialized
Oct 11 22:59:14 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 22:59:14 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 22:59:14 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 22:59:14 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 22:59:14 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 22:59:14 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 22:59:14 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 22:59:14 IQ138000 kernel: PTP clock support registered
Oct 11 22:59:14 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 22:59:14 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 22:59:14 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 22:59:14 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 22:59:14 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 22:59:14 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 22:59:14 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 22:59:14 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 22:59:14 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 22:59:14 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 22:59:14 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 22:59:14 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 22:59:14 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 22:59:14 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 22:59:14 IQ138000 kernel: Key type id_resolver registered
Oct 11 22:59:14 IQ138000 kernel: Key type id_legacy registered
Oct 11 22:59:14 IQ138000 kernel: Key type asymmetric registered
Oct 11 22:59:14 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 22:59:14 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 22:59:14 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 22:59:14 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 22:59:14 IQ138000 kernel: io scheduler kyber registered
Oct 11 22:59:14 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 22:59:14 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 22:59:14 IQ138000 kernel: brd: module loaded
Oct 11 22:59:14 IQ138000 kernel: loop: module loaded
Oct 11 22:59:14 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 22:59:14 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 22:59:14 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 22:59:14 IQ138000 kernel: CAN device driver interface
Oct 11 22:59:14 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 22:59:14 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 22:59:14 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 22:59:14 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 22:59:14 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 22:59:14 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 22:59:14 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 22:59:14 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 22:59:14 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 22:59:14 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 22:59:14 IQ138000 kernel: i2c /dev entries driver
Oct 11 22:59:14 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 22:59:14 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 22:59:14 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 22:59:14 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 22:59:14 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 22:59:14 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 22:59:14 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 22:59:14 IQ138000 kernel: Segment Routing with IPv6
Oct 11 22:59:14 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 22:59:14 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 22:59:14 IQ138000 kernel: can: controller area network core
Oct 11 22:59:14 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 22:59:14 IQ138000 kernel: can: raw protocol
Oct 11 22:59:14 IQ138000 kernel: can: broadcast manager protocol
Oct 11 22:59:14 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 22:59:14 IQ138000 kernel: can: SAE J1939
Oct 11 22:59:14 IQ138000 kernel: Key type dns_resolver registered
Oct 11 22:59:14 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 22:59:14 IQ138000 kernel: registered taskstats version 1
Oct 11 22:59:14 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 22:59:14 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 22:59:14 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 22:59:14 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 22:59:14 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 22:59:14 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 22:59:14 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 22:59:14 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 22:59:14 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T22:59:10 UTC (1760223550)
Oct 11 22:59:14 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 22:59:14 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 22:59:14 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 22:59:14 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 22:59:14 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 22:59:14 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 22:59:14 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 22:59:14 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 22:59:14 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 22:59:14 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 22:59:14 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 22:59:14 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 22:59:14 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 22:59:14 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 22:59:14 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: random: fast init done
Oct 11 22:59:14 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 22:59:14 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 22:59:14 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 22:59:14 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 22:59:14 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 22:59:14 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 22:59:14 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 22:59:14 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 22:59:14 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 22:59:14 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 22:59:14 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 22:59:14 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 22:59:14 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 22:59:14 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 22:59:14 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 22:59:14 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 22:59:14 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 22:59:14 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 22:59:14 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 22:59:14 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 22:59:14 IQ138000 kernel: libphy: stmmac: probed
Oct 11 22:59:14 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 22:59:14 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 22:59:14 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 22:59:14 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 22:59:14 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 22:59:14 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 22:59:14 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 22:59:14 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 22:59:14 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 22:59:14 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 22:59:14 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 22:59:14 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 22:59:14 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 22:59:14 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 22:59:14 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 22:59:14 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 22:59:14 IQ138000 kernel: of_cfs_init
Oct 11 22:59:14 IQ138000 kernel: of_cfs_init: OK
Oct 11 22:59:14 IQ138000 kernel: ALSA device list:
Oct 11 22:59:14 IQ138000 kernel:   No soundcards found.
Oct 11 22:59:14 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 22:59:14 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 22:59:14 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 22:59:14 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 22:59:14 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 22:59:14 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 22:59:14 IQ138000 kernel: devtmpfs: mounted
Oct 11 22:59:14 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 22:59:14 IQ138000 kernel: Run /sbin/init as init process
Oct 11 22:59:14 IQ138000 kernel:   with arguments:
Oct 11 22:59:14 IQ138000 kernel:     /sbin/init
Oct 11 22:59:14 IQ138000 kernel:   with environment:
Oct 11 22:59:14 IQ138000 kernel:     HOME=/
Oct 11 22:59:14 IQ138000 kernel:     TERM=linux
Oct 11 22:59:14 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 22:59:14 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 22:59:14 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 22:59:14 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 22:59:14 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 22:59:14 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 22:59:14 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 22:59:14 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 22:59:14 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 22:59:14 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 22:59:14 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 22:59:14 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 22:59:14 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 22:59:14 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 22:59:14 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 22:59:14 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 22:59:14 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 22:59:14 IQ138000 systemd[1]: Reached target Paths.
Oct 11 22:59:14 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 22:59:14 IQ138000 systemd[1]: Reached target Slices.
Oct 11 22:59:14 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 22:59:14 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 22:59:14 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 22:59:14 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 22:59:14 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 22:59:14 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 22:59:14 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 22:59:14 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 22:59:14 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 22:59:14 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 22:59:14 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 22:59:14 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 22:59:14 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 22:59:14 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 22:59:14 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 22:59:14 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 22:59:14 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 22:59:14 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 22:59:14 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 22:59:14 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 22:59:14 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 22:59:14 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 22:59:14 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 22:59:14 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 22:59:14 IQ138000 systemd-journald[139]: Journal started
Oct 11 22:59:14 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 22:59:14 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
Oct 11 22:59:14 IQ138000 systemd[1]: Started Journal Service.
Oct 11 22:59:14 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 22:59:14 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 22:59:14 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 22:59:14 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 22:59:14 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 22:59:14 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 22:59:14 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 22:59:14 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 22:59:15 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 22:59:15 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 22:59:15 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 22:59:15 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 22:59:15 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 22:59:15 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 22:59:15 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 22:59:15 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 22:59:15 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 22:59:15 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 22:59:15 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 22:59:15 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 22:59:15 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 22:59:15 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 22:59:15 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 22:59:15 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 22:59:15 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 22:59:15 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 22:59:16 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 22:59:16 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 22:59:16 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 22:59:16 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 22:59:16 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 22:59:16 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 22:59:16 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 22:59:16 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 22:59:16 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 22:59:16 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 22:59:16 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 22:59:16 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 22:59:16 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 22:59:16 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 22:59:16 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 22:59:16 IQ138000 systemd-udevd[160]: eth1: Failed to query device driver: Device or resource busy
Oct 11 22:59:16 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 22:59:16 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 22:59:16 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 22:59:16 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 22:59:16 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 22:59:16 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 22:59:16 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 22:59:17 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 22:59:17 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 22:59:17 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 22:59:17 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 22:59:17 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 22:59:17 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 22:59:17 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 22:59:17 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 22:59:17 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 22:59:17 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 22:59:17 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 22:59:17 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 22:59:17 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 22:59:17 IQ138000 systemd-udevd[158]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 22:59:17 IQ138000 systemd-udevd[157]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 22:59:17 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 22:59:17 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 22:59:17 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 22:59:17 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 22:59:17 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 22:59:17 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 22:59:17 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 22:59:17 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 22:59:17 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 22:59:17 IQ138000 systemd[1]: Reached target Swap.
Oct 11 22:59:17 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 22:59:17 IQ138000 systemd-fsck[215]: data: recovering journal
Oct 11 22:59:17 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 22:59:17 IQ138000 systemd-fsck[215]: data: clean, 16462/328656 files, 373707/1313536 blocks
Oct 11 22:59:17 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 22:59:17 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 22:59:17 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 22:59:17 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 22:59:17 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 22:59:17 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 22:59:17 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 22:59:17 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 22:59:17 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 22:59:18 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 22:59:18 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 48.035ms for 463 entries.
Oct 11 22:59:18 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 22:59:18 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 22:59:18 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 22:59:18 IQ138000 kernel: random: crng init done
Oct 11 22:59:18 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 22:59:18 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 22:59:18 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 22:59:18 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 22:59:18 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 22:59:18 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 22:59:18 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 22:59:18 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 22:59:18 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 22:59:19 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 22:59:19 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 22:59:19 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 22:59:19 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 22:59:19 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 22:59:19 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 22:59:19 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 22:59:19 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 22:59:19 IQ138000 systemd[1]: Reached target Timers.
Oct 11 22:59:19 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 22:59:19 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 22:59:19 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 22:59:19 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 22:59:19 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 22:59:19 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 22:59:19 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 22:59:19 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 22:59:19 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 22:59:19 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 22:59:19 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 22:59:19 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 22:59:19 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 22:59:19 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 22:59:19 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 22:59:19 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 22:59:19 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 22:59:19 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 22:59:19 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 22:59:19 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 22:59:19 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 22:59:19 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 22:59:19 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 22:59:19 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 22:59:19 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 22:59:19 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 22:59:19 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 22:59:19 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 22:59:19 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 22:59:19 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 22:59:19 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 22:59:19 IQ138000 wb-watchdog[324]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 22:59:19 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 22:59:19 IQ138000 migrate.sh[323]: Error: No such file or directory
Oct 11 22:59:20 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 22:59:20 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 22:59:20 IQ138000 migrate.sh[333]: Error: No such file or directory
Oct 11 22:59:20 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 22:59:20 IQ138000 systemd[1]: Started watch config files.
Oct 11 22:59:20 IQ138000 reverse-ssh.sh[343]: Error: No such file or directory
Oct 11 22:59:20 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 22:59:20 IQ138000 migrate.sh[352]: Error: No such file or directory
Oct 11 22:59:20 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 22:59:20 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 22:59:20 IQ138000 rules-preprocessor[336]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 22:59:20 IQ138000 rules-preprocessor[336]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 22:59:20 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 22:59:20 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 22:59:20 IQ138000 migrate.sh[364]: Error: No such file or directory
Oct 11 22:59:20 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 22:59:20 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 22:59:20 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Successfully dropped root privileges.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: avahi-daemon 0.8 starting up.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Successfully called chroot().
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Successfully dropped remaining capabilities.
Oct 11 22:59:20 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: No service file found in /etc/avahi/services.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: New relevant interface lo.IPv6 for mDNS.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: New relevant interface lo.IPv4 for mDNS.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Network interface enumeration completed.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Registering new address record for ::1 on lo.*.
Oct 11 22:59:20 IQ138000 avahi-daemon[368]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 22:59:20 IQ138000 migrate.sh[379]: Error: No such file or directory
Oct 11 22:59:20 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 22:59:20 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 22:59:20 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 22:59:20 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 22:59:20 IQ138000 systemd-logind[342]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 22:59:20 IQ138000 systemd-logind[342]: New seat seat0.
Oct 11 22:59:20 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 22:59:20 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 22:59:20 IQ138000 wpa_supplicant[378]: Successfully initialized wpa_supplicant
Oct 11 22:59:20 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:20 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 22:59:20 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 22:59:20 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 22:59:20 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:20 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 22:59:20 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 22:59:20 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 22:59:20 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 22:59:20 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 22:59:20 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:20 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 22:59:20 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 22:59:20 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 22:59:20 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 22:59:20 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 22:59:20 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 22:59:20 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 22:59:21 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 22:59:21 IQ138000 systemd[1]: Started User Login Management.
Oct 11 22:59:21 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 22:59:21 IQ138000 monit[321]: Starting daemon monitor: monit.
Oct 11 22:59:21 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 22:59:21 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 22:59:21 IQ138000 avahi-daemon[368]: Server startup complete. Host name is IQ138000.local. Local service cookie is 584443795.
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.1685] NetworkManager (version 1.42.4) is starting... (boot:e0a81678-a0d1-4fd0-b88d-24404da5d463)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.1689] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 22:59:21 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.1841] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 22:59:21 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.2374] manager[0x707128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 22:59:21 IQ138000 systemd[1]: Started Network Manager.
Oct 11 22:59:21 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 22:59:21 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 22:59:21 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 22:59:21 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 22:59:21 IQ138000 ModemManager[471]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 22:59:21 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 22:59:21 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.7951] hostname: hostname: using hostnamed
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.7954] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.7990] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.8135] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.8154] manager[0x707128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.8156] manager[0x707128]: rfkill: WWAN hardware radio set enabled
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.8566] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 22:59:21 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.8649] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.8685] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9011] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9070] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9089] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9097] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9102] manager: Networking is enabled by state file
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9153] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 22:59:21 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9156] settings: Loaded settings plugin: keyfile (internal)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9157] ifupdown: management mode: unmanaged
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9159] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9160] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 22:59:21 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9748] dhcp: init: Using DHCP client 'internal'
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9772] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9920] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 22:59:21 IQ138000 NetworkManager[404]: <info>  [1760223561.9967] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.0036] device (lo): Activation: starting connection 'lo' (d2e2ed2e-0bff-4eab-b0cf-d380f5c795d5)
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.0194] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.0222] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:22 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 22:59:22 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.3741] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.3799] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.3842] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.3884] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:22 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 22:59:22 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 22:59:22 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 22:59:22 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 22:59:22 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.5910] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.5957] device (wlan0): driver supports Access Point (AP) mode
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.6011] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 22:59:22 IQ138000 NetworkManager[404]: <info>  [1760223562.6034] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:22 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 22:59:23 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.4208] device (wlan1): driver supports Access Point (AP) mode
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.4253] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.4287] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.4823] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.4841] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.4875] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.5000] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.5458] modem-manager: ModemManager available
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.5514] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.5538] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.5671] device (lo): Activation: successful, device activated.
Oct 11 22:59:23 IQ138000 wpa_supplicant[378]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8270] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8287] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8323] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8353] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8399] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8452] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8530] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8547] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8580] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8610] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8659] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 22:59:23 IQ138000 NetworkManager[404]: <info>  [1760223563.8719] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:24 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 22:59:24 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 22:59:24 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 22:59:27 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 22:59:27 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 22:59:27 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 22:59:27 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:27 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 22:59:27 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 22:59:27 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 22:59:27 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 22:59:27 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:28 IQ138000 init.sh[1319]: ...
Oct 11 22:59:28 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 22:59:28 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:28 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 22:59:28 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 22:59:28 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 22:59:28 IQ138000 init.sh[1428]: In file included from -:24:
Oct 11 22:59:28 IQ138000 init.sh[1428]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:28 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 22:59:28 IQ138000 init.sh[1319]: ...
Oct 11 22:59:28 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 22:59:28 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:29 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 22:59:29 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 22:59:29 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 22:59:29 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 22:59:29 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:29 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 22:59:29 IQ138000 init.sh[1489]: In file included from -:11:
Oct 11 22:59:29 IQ138000 init.sh[1489]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 22:59:29 IQ138000 init.sh[1319]: ...
Oct 11 22:59:29 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 22:59:29 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 22:59:29 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 22:59:29 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 22:59:29 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 22:59:30 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 22:59:30 IQ138000 systemd[1]: Reached target Network.
Oct 11 22:59:30 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 22:59:30 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 22:59:30 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 22:59:30 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 22:59:30 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 22:59:30 IQ138000 lsyncd[1614]: 22:59:30 Normal: --- Startup ---
Oct 11 22:59:30 IQ138000 lsyncd[1614]: 22:59:30 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 22:59:30 IQ138000 lsyncd[1614]: journal
Oct 11 22:59:30 IQ138000 lsyncd[1614]: messages
Oct 11 22:59:30 IQ138000 lsyncd[1614]: iq_network_manager/iq_network_manager.log
Oct 11 22:59:30 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 22:59:30 IQ138000 knxd[1609]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 22:59:30 IQ138000 knxd[1609]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 22:59:30 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 22:59:30 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 22:59:30 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 22:59:30 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 22:59:30 IQ138000 ntpd[1622]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 22:59:30 IQ138000 ntpd[1622]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 22:59:30 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 22:59:30 IQ138000 ntpd[1622]: ntp-4 is maintained by Network Time Foundation,
Oct 11 22:59:30 IQ138000 ntpd[1622]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 22:59:30 IQ138000 ntpd[1622]: corporation.  Support and training for ntp-4 are
Oct 11 22:59:30 IQ138000 ntpd[1622]: available at https://www.nwtime.org/support
Oct 11 22:59:30 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 22:59:30 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 22:59:30 IQ138000 ntpd[1648]: proto: precision = 1.083 usec (-20)
Oct 11 22:59:30 IQ138000 ntpd[1648]: basedate set to 2020-09-11
Oct 11 22:59:30 IQ138000 ntpd[1648]: gps base set to 2020-09-13 (week 2123)
Oct 11 22:59:30 IQ138000 ntpd[1648]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 22:59:30 IQ138000 ntpd[1648]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 22:59:30 IQ138000 ntpd[1648]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 22:59:30 IQ138000 ntpd[1648]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 22:59:30 IQ138000 ntpd[1648]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 22:59:30 IQ138000 ntpd[1648]: Listen normally on 3 lo [::1]:123
Oct 11 22:59:30 IQ138000 ntpd[1648]: Listening on routing socket on fd #20 for interface updates
Oct 11 22:59:30 IQ138000 persist_meter_data.sh[1647]: Error: No such file or directory
Oct 11 22:59:30 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 22:59:30 IQ138000 lsyncd[1638]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 22:59:30 IQ138000 lsyncd[1623]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 22:59:30 IQ138000 lsyncd[1623]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 22:59:30 IQ138000 lsyncd[1614]: 22:59:30 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 22:59:30 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 22:59:30 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 22:59:30 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 22:59:31 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 22:59:31 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 22:59:31 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 22:59:31 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 22:59:31 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 22:59:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 22:59:31 IQ138000 wb-mqtt-w1[1676]: MQTT broker localhost:1883
Oct 11 22:59:31 IQ138000 wb-mqtt-w1[1676]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:31 IQ138000 wb-mqtt-w1[1676]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 22:59:31 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 22:59:31 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 22:59:31 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 22:59:31 IQ138000 wb-mqtt-w1[1676]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 22:59:31 IQ138000 wb-mqtt-w1[1676]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 22:59:31 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 22:59:31 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 22:59:31 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 22:59:31 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:31 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 22:59:31 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 22:59:31 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 22:59:31 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 22:59:31 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:31 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 22:59:31 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 22:59:31 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 22:59:31 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 22:59:31 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 22:59:31 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 22:59:31 IQ138000 wb-connection-manager[1506]: Connection LegacyWiFi not found, skipping
Oct 11 22:59:31 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 22:59:31 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 22:59:31 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 22:59:31 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 22:59:31 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 22:59:31 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 22:59:31 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 22:59:31 IQ138000 ntpd[1648]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 22:59:31 IQ138000 sshd[1730]: Server listening on 0.0.0.0 port 22.
Oct 11 22:59:31 IQ138000 sshd[1730]: Server listening on :: port 22.
Oct 11 22:59:31 IQ138000 vnstatd[1652]: Info: vnStat daemon 2.6 started. (pid:1652 uid:110 gid:117 64-bit)
Oct 11 22:59:31 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 22:59:31 IQ138000 vnstatd[1652]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 22:59:31 IQ138000 vnstatd[1652]: Info: Interface "ppp0" disabled.
Oct 11 22:59:31 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:31 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 22:59:31 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 22:59:31 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 22:59:32 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 22:59:32 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 22:59:32 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 22:59:32 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 22:59:32 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 22:59:32 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 22:59:32 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 22:59:32 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 22:59:32 IQ138000 reverse-ssh.sh[1838]: Error: No such file or directory
Oct 11 22:59:32 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 22:59:32 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:32 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 22:59:32 IQ138000 NetworkManager[404]: <error> [1760223572.5759] audit: failed to open auditd socket: Protocol not supported
Oct 11 22:59:32 IQ138000 wb-adjust-systime[1829]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 22:59:32 IQ138000 NetworkManager[404]: <info>  [1760223572.5762] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1506 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 22:59:32 IQ138000 wb-connection-manager[1506]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 22:59:32 IQ138000 wpa_supplicant[378]: wlan0: Reject scan trigger since one is already pending
Oct 11 22:59:32 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 22:59:32 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Warning: Error resolving bridge address: Name or service not known.
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 22:59:32 IQ138000 mosquitto[1842]: 1760223572: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 22:59:32 IQ138000 wb-adjust-systime[1829]: Drift file is valid (was recently edited)
Oct 11 22:59:32 IQ138000 ntpd[1648]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 22:59:32 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 22:59:32 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 22:59:32 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 22:59:32 IQ138000 knxd[1873]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 22:59:32 IQ138000 knxd[1873]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 22:59:32 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 22:59:32 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:32 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:32 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:32 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 22:59:32 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 22:59:33 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 22:59:33 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 22:59:33 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 22:59:33 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.2517] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.2524] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1506 uid=0 result="success"
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.2531] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.2553] manager: NetworkManager state is now CONNECTING
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.2838] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:33 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.3058] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.3060] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.3846] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:33 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4001] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4176] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4183] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4185] Config: added 'scan_ssid' value '1'
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4186] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4188] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.4189] Config: added 'psk' value '<hidden>'
Oct 11 22:59:33 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 22:59:33 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 22:59:33 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: MQTT broker localhost:1883
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: Config file /etc/wb-mqtt-db.conf
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:33 IQ138000 ntpd[1648]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 22:59:33 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.7841] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 22:59:33 IQ138000 NetworkManager[404]: <info>  [1760223573.7844] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 22:59:33 IQ138000 systemd[1]: Started metrics sender.
Oct 11 22:59:33 IQ138000 wb-mqtt-knx[1972]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:33 IQ138000 wb-mqtt-knx[1972]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:33 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: INFO: [sqlite] Creating tables if necessary
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: INFO: [sqlite] Create indices if necessary
Oct 11 22:59:33 IQ138000 wb-mqtt-db[1952]: INFO: [sqlite] Analyzing data table
Oct 11 22:59:33 IQ138000 wb-mqtt-logs[1983]: MQTT broker localhost:1883
Oct 11 22:59:33 IQ138000 wb-mqtt-logs[1983]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:33 IQ138000 wb-mqtt-logs[1983]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:33 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 22:59:34 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 22:59:34 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 22:59:34 IQ138000 wb-mqtt-confed[1946]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 22:59:34 IQ138000 wb-mqtt-confed[1946]: INFO: [wbgo_mqtt] confed-IQ138000-1946: MQTT connection established
Oct 11 22:59:34 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 22:59:34 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 22:59:34 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.550s CPU time.
Oct 11 22:59:34 IQ138000 ntpd[1648]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 22:59:34 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:34 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2014]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[1964]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 22:59:35 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 22:59:35 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 22:59:35 IQ138000 wb-mqtt-mbgate[1991]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 22:59:35 IQ138000 wb-mqtt-iec104[2144]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 22:59:35 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2139]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 22:59:35 IQ138000 wb-mqtt-opcua[2139]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 22:59:35 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 22:59:36 IQ138000 wb-mqtt-gpio[1858]: INFO: [gpio driver] Started
Oct 11 22:59:36 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 22:59:36 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 22:59:36 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 22:59:36 IQ138000 wb-mqtt-iec104[2144]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 22:59:36 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:36 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 22:59:36 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 22:59:36 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 22:59:36 IQ138000 wb-mqtt-logs[1983]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:36 IQ138000 wb-mqtt-logs[1983]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:36 IQ138000 wb-mqtt-logs[1983]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:36 IQ138000 wb-mqtt-logs[1983]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 22:59:37 IQ138000 wb-mqtt-knx[1972]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:37 IQ138000 wb-mqtt-knx[1972]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:37 IQ138000 wb-mqtt-knx[1972]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:37 IQ138000 wb-mqtt-knx[1972]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 22:59:37 IQ138000 wb-mqtt-knx[1972]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 22:59:38 IQ138000 python3[1922]: No data file found at /tmp/network_status_cache.json
Oct 11 22:59:38 IQ138000 python3[1922]: Connecting to MQTT
Oct 11 22:59:38 IQ138000 python3[1922]: Connected to MQTT
Oct 11 22:59:38 IQ138000 python3[1922]: Connection returned result: Connection Accepted.
Oct 11 22:59:38 IQ138000 NetworkManager[404]: <info>  [1760223578.8938] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 22:59:38 IQ138000 NetworkManager[404]: <info>  [1760223578.8941] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 22:59:40 IQ138000 wb-device-manager[1930]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 22:59:40 IQ138000 wb-device-manager[1930]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 22:59:40 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2007 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 22:59:40 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 22:59:41 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New virtual device lo d2e2ed2e-0bff-4eab-b0cf-d380f5c795d5 /org/freedesktop/NetworkManager/Settings/7
Oct 11 22:59:41 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 22:59:41 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New active connection lo d2e2ed2e-0bff-4eab-b0cf-d380f5c795d5 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 22:59:41 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:41 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:42 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 22:59:42 IQ138000 kernel: dc5ldo: disabling
Oct 11 22:59:42 IQ138000 kernel: dldo4: disabling
Oct 11 22:59:42 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 22:59:42 IQ138000 kernel: vcc-sd: disabling
Oct 11 22:59:42 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 22:59:42 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 22:59:42 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 22:59:42 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 22:59:42 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 22:59:42 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:42 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: MQTT broker localhost:1883
Oct 11 22:59:42 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 22:59:42 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] ADC worker thread is started
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 22:59:43 IQ138000 knxd[3080]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 22:59:43 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 22:59:43 IQ138000 knxd[3080]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 22:59:43 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:43 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 22:59:43 IQ138000 wb-mqtt-adc[3067]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 22:59:43 IQ138000 wb-mqtt-confed[1946]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 22:59:44 IQ138000 wb-mqtt-db[1952]: INFO: [sqlite] DB initialization is done
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 22:59:44 IQ138000 wb-mqtt-serial[1661]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 22:59:45 IQ138000 wb-gsm[3325]: main: Called from pid 1 (systemd)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 22:59:45 IQ138000 wb-gsm[3379]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 22:59:45 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 22:59:45 IQ138000 wb-usb-otg-start.sh[3441]: : wb-usb-otg-start
Oct 11 22:59:45 IQ138000 wb-usb-otg-start.sh[3441]: main: setup_device()
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 22:59:45 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 22:59:46 IQ138000 wb-gsm[3454]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 22:59:46 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 22:59:46 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 22:59:46 IQ138000 kernel: using random self ethernet address
Oct 11 22:59:46 IQ138000 kernel: using random host ethernet address
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 22:59:46 IQ138000 wb-usb-otg-start.sh[3441]: main: enabling profile rndis
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 22:59:46 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 22:59:46 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 22:59:46 IQ138000 systemd-udevd[3420]: Using default interface naming scheme 'v247'.
Oct 11 22:59:46 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: DB logger started, go to main loop
Oct 11 22:59:46 IQ138000 NetworkManager[404]: <info>  [1760223586.3926] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 22:59:46 IQ138000 NetworkManager[404]: <info>  [1760223586.5782] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 22:59:46 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 22:59:46 IQ138000 wb-gsm[3507]: should_enable: Should enable GSM modem
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2414)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 22:59:46 IQ138000 wb-mqtt-db[1952]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 22:59:46 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 22:59:47 IQ138000 NetworkManager[404]: <info>  [1760223587.7133] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 22:59:47 IQ138000 NetworkManager[404]: <info>  [1760223587.7136] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 22:59:47 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 22:59:47 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 22:59:47 IQ138000 wb-gsm[3582]: main: Called from pid 3509 (wb-gsm-mm)
Oct 11 22:59:48 IQ138000 wb-gsm[3593]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 22:59:48 IQ138000 wb-gsm[3616]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 22:59:48 IQ138000 python3[1922]: Выполнение: service wb-connection-manager stop
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 22:59:48 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 22:59:49 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 22:59:49 IQ138000 npm[1683]: > zigbee2mqtt@2.1.1 start
Oct 11 22:59:49 IQ138000 npm[1683]: > node index.js
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 22:59:49 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 22:59:50 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:51 IQ138000 npm[3746]: Starting Zigbee2MQTT without watchdog.
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 22:59:51 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 22:59:51 IQ138000 wb-gsm[4000]: mm_off: Modem is already OFF
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:52 IQ138000 wb-gsm[4069]: main: Called from pid 3509 (wb-gsm-mm)
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:52 IQ138000 wb-gsm[4081]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 22:59:52 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:53 IQ138000 wb-gsm[4104]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 22:59:53 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:54 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 22:59:55 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 22:59:55 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:55 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:55 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 22:59:55 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:55 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:55 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:55 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 22:59:55 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 22:59:55 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 22:59:55 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 22:59:55 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 22:59:55 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 22:59:55 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 22:59:55 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 22:59:55 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 22:59:55 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 22:59:55 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 22:59:55 IQ138000 knxd[4350]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 22:59:55 IQ138000 knxd[4350]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 22:59:55 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:56 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 22:59:56 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: MQTT broker localhost:1883
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 22:59:56 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 22:59:56 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 22:59:56 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 22:59:56 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 22:59:56 IQ138000 systemd[1]: Started User command handler service.
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: w1 thread Started
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 22:59:56 IQ138000 wb-mqtt-w1[4368]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 22:59:56 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:56 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 22:59:56 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 22:59:56 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 22:59:56 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.194s CPU time.
Oct 11 22:59:56 IQ138000 python3[1922]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 22:59:56 IQ138000 python3[1922]:  
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 22:59:56 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 22:59:57 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <warn>  [1760223598.5317] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <info>  [1760223598.5319] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 22:59:58 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <info>  [1760223598.5339] manager: NetworkManager state is now DISCONNECTED
Oct 11 22:59:58 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <warn>  [1760223598.5360] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <info>  [1760223598.5373] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <info>  [1760223598.5670] manager: startup complete
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <info>  [1760223598.5683] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 22:59:58 IQ138000 NetworkManager[404]: <info>  [1760223598.5685] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 22:59:58 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 22:59:58 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 22:59:58 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 22:59:58 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:58 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:59 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 22:59:59 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 22:59:59 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:59 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 22:59:59 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 22:59:59 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 22:59:59 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:00 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:00 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 python3[1922]: Выполнение: mmcli -m wbc
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:00:01 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:01 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 23:00:01 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:00:01 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 23:00:01 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 23:00:01 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:00:01 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:00:01 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:00:01 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:00:01 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:00:01 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:00:01 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 23:00:01 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:02 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:00:02 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 23:00:02 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:00:02 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 23:00:02 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:02 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:00:02 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 23:00:02 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:02 IQ138000 watchdog[4632]: starting daemon (5.16):
Oct 11 23:00:02 IQ138000 watchdog[4632]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 23:00:02 IQ138000 watchdog[4632]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 23:00:02 IQ138000 watchdog[4632]:  ping: no machine to check
Oct 11 23:00:02 IQ138000 watchdog[4632]:  file: no file to check
Oct 11 23:00:02 IQ138000 watchdog[4632]:  pidfile: /var/run/sshd.pid
Oct 11 23:00:02 IQ138000 watchdog[4632]:  interface: no interface to check
Oct 11 23:00:02 IQ138000 watchdog[4632]:  temperature: no sensors to check
Oct 11 23:00:02 IQ138000 watchdog[4632]:  no test binary files
Oct 11 23:00:02 IQ138000 watchdog[4632]:  no repair binary files
Oct 11 23:00:02 IQ138000 watchdog[4632]:  error retry time-out = 30 seconds
Oct 11 23:00:02 IQ138000 watchdog[4632]:  repair attempts = 1
Oct 11 23:00:02 IQ138000 watchdog[4632]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 23:00:02 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 23:00:02 IQ138000 watchdog[4632]: watchdog now set to 120 seconds
Oct 11 23:00:02 IQ138000 watchdog[4632]: hardware watchdog identity: WBEC WDT
Oct 11 23:00:02 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 23:00:02 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:02 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 23:00:02 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 23:00:02 IQ138000 systemd[1]: Startup finished in 3.800s (kernel) + 49.993s (userspace) = 53.794s.
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:02 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:02 IQ138000 wb-rules[4611]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:00:02 IQ138000 wb-rules[4611]: INFO: driver is created
Oct 11 23:00:02 IQ138000 wb-rules[4611]: INFO: [wbgo_mqtt] rules-IQ138000-4611: MQTT connection established
Oct 11 23:00:02 IQ138000 wb-rules[4611]: INFO: driver loop is started
Oct 11 23:00:02 IQ138000 wb-rules[4611]: INFO: wait for driver to become ready
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:02 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:03 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:04 IQ138000 wb-rules[4611]: INFO: driver is ready
Oct 11 23:00:04 IQ138000 wb-rules[4611]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 23:00:04 IQ138000 wb-rules[4611]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4611: MQTT connection established
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-rules[4611]: INFO: [engine] Starting sync loop
Oct 11 23:00:04 IQ138000 wb-rules[4611]: INFO: [engine] Starting main loop
Oct 11 23:00:04 IQ138000 wb-rules[4611]: INFO: the engine is ready
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:04 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-rules[4611]: WARNING: [rule warning] DAC: no config file
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:05 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:00:06 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 23:00:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:00:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:00:06 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:00:06 IQ138000 knxd[4942]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:00:06 IQ138000 knxd[4942]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:00:06 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:00:06 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:00:06 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 23:00:06 IQ138000 NetworkManager[404]: <info>  [1760223606.5384] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 23:00:06 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 1e:da:c5:e5:16:a5
Oct 11 23:00:06 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 23:00:06 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 23:00:06 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 23:00:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 23:00:06 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 23:00:06 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 23:00:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 23:00:06 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 23:00:06 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 systemd-udevd[4879]: Using default interface naming scheme 'v247'.
Oct 11 23:00:06 IQ138000 systemd-udevd[4879]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:00:06 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 23:00:06 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:07 IQ138000 wpa_supplicant[378]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 23:00:07 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:00:07 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:08 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 23:00:08 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:08 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 23:00:08 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:08 IQ138000 python3[1922]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 23:00:08 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 23:00:08 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:08 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 23:00:08 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:09 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:09 IQ138000 wb-rules[4611]: INFO: all rule files are loaded
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:00:09 IQ138000 wb-gsm[5032]: mm_on: Waiting for modem to start
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:09 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:10 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:10 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:00:11 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:11 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 23:00:11 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 23:00:11 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:11 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:00:11 IQ138000 npm[3746]: [2025-10-11 23:00:11] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 23:00:11 IQ138000 npm[3746]: [2025-10-11 23:00:11] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 23:00:11 IQ138000 npm[3746]: [2025-10-11 23:00:11] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 23:00:11 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:11 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:00:12 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:00:12 IQ138000 npm[3746]: [2025-10-11 23:00:12] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 23:00:12 IQ138000 npm[3746]: [2025-10-11 23:00:12] info:         zh:zstack:znp: Serialport opened
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:00:12 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:00:13 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:13 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:14 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:00:15 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:15 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 5 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: Currently 4 devices are joined.
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-12 02:00:16.112+00:00
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-12T02:00:16.112Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760223796133,"cmd_timestamp_ms":1760223616133,"source":"schedule"}
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760223796133,"cmd_timestamp_ms":1760223616133,"source":"schedule"}
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:16 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 23:00:16 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:16 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-12 02:00:16.468+00:00
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: Connected to MQTT server
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-12T02:00:16.468Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 23:00:16 IQ138000 knxd[5136]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:00:16 IQ138000 knxd[5136]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760223796487,"cmd_timestamp_ms":1760223616487,"source":"schedule"}
Oct 11 23:00:16 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760223796487,"cmd_timestamp_ms":1760223616487,"source":"schedule"}
Oct 11 23:00:16 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:00:16 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:16 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-12 02:00:16.696+00:00
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-12T02:00:16.696Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223796717,"cmd_timestamp_ms":1760223616717,"source":"schedule"}
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223796717,"cmd_timestamp_ms":1760223616717,"source":"schedule"}
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:16 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:00:16 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:00:16 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:00:16 IQ138000 wb-rules[4611]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:00:16 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 3 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m: Started frontend on port 8282
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-12 02:00:16.973+00:00
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.74,"last_seen":1760219262060,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":55.11,"last_seen":1760218940768,"power_outage_count":48745,"temperature":24.36,"voltage":3025}'
Oct 11 23:00:16 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-12T02:00:16.973Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:00:16 IQ138000 npm[3746]: [2025-10-11 23:00:16] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223796998,"cmd_timestamp_ms":1760223616998,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223796998,"cmd_timestamp_ms":1760223616998,"source":"schedule"}
Oct 11 23:00:17 IQ138000 npm[3746]: [2025-10-11 23:00:17] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":47.86,"last_seen":1760219055025,"power_outage_count":25795,"pressure":990.8,"temperature":21.17,"voltage":3005}'
Oct 11 23:00:17 IQ138000 npm[3746]: [2025-10-11 23:00:17] info:         z2m: Zigbee2MQTT started!
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-12 02:00:17.202+00:00
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-12T02:00:17.202Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797216,"cmd_timestamp_ms":1760223617216,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797216,"cmd_timestamp_ms":1760223617216,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-12 02:00:17.281+00:00
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-12T02:00:17.281Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797292,"cmd_timestamp_ms":1760223617292,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797292,"cmd_timestamp_ms":1760223617292,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-12 02:00:17.446+00:00
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-12T02:00:17.446Z","to":"2025-10-12T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":1,"i":0}}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797457,"cmd_timestamp_ms":1760223617457,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797457,"cmd_timestamp_ms":1760223617457,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-12 02:00:17.595+00:00
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-12T02:00:17.595Z","to":"2025-10-12T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":1,"i":0}}
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797607,"cmd_timestamp_ms":1760223617607,"source":"schedule"}
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760223797607,"cmd_timestamp_ms":1760223617607,"source":"schedule"}
Oct 11 23:00:17 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:00:17 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-12 02:00:18.078+00:00
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-12T02:00:18.078Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760223798092,"cmd_timestamp_ms":1760223618092,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760223798092,"cmd_timestamp_ms":1760223618092,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-12 02:00:18.254+00:00
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-12T02:00:18.254Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760223798267,"cmd_timestamp_ms":1760223618267,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760223798267,"cmd_timestamp_ms":1760223618267,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-12 02:00:18.478+00:00
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-12T02:00:18.478Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760223798492,"cmd_timestamp_ms":1760223618492,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760223798492,"cmd_timestamp_ms":1760223618492,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-12 02:00:18.605+00:00
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-12T02:00:18.605Z","to":"2025-10-12T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760223798617,"cmd_timestamp_ms":1760223618617,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760223798617,"cmd_timestamp_ms":1760223618617,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:18 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-12 02:00:18.750+00:00
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-12T02:00:18.750Z","to":"2025-10-12T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760223798762,"cmd_timestamp_ms":1760223618762,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760223798762,"cmd_timestamp_ms":1760223618762,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-12 02:00:18.932+00:00
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 23:00:18 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-12T02:00:18.932Z","to":"2025-10-12T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760223798941,"cmd_timestamp_ms":1760223618941,"source":"schedule"}
Oct 11 23:00:18 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760223798941,"cmd_timestamp_ms":1760223618941,"source":"schedule"}
Oct 11 23:00:19 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:19 IQ138000 wb-watchdog[5244]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-12 02:00:19.126+00:00
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-12T02:00:19.126Z","to":"2025-10-12T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760223799138,"cmd_timestamp_ms":1760223619138,"source":"schedule"}
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760223799138,"cmd_timestamp_ms":1760223619138,"source":"schedule"}
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 23:00:19 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 23:00:19 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 23:00:20 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 23:00:20 IQ138000 wb-rules[4611]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 23:00:20 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:20 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:20 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:00:20 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 23:00:20 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:00:20 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 23:00:20 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:00:20 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:20 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:20 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:21 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:21 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:21 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:22 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:22 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:22 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:22 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:24 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:24 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:25 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:25 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:00:25 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:25 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:00:25 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:00:25 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:25 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:00:26 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:26 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:26 IQ138000 ModemManager[471]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 23:00:26 IQ138000 ModemManager[471]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 23:00:26 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 23:00:26 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:00:26 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:00:26 IQ138000 knxd[5372]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:00:26 IQ138000 knxd[5372]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:00:26 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:00:26 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:00:26 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:00:26 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:27 IQ138000 ModemManager[471]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 23:00:27 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:27 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 23:00:27 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:27 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 23:00:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 23:00:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 23:00:28 IQ138000 python3[1922]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:00:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 23:00:28 IQ138000 ModemManager[471]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 23:00:28 IQ138000 ModemManager[471]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.7874] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.7905] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.7935] device (ttyUSB1): modem state 'enabling'
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.8003] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.8073] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.8335] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.8349] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:28 IQ138000 NetworkManager[404]: <info>  [1760223628.8414] manager: NetworkManager state is now CONNECTING
Oct 11 23:00:28 IQ138000 ModemManager[471]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 23:00:28 IQ138000 wb-mqtt-nm-helper[2007]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 23:00:28 IQ138000 ModemManager[471]: <info>  [modem0] power state updated: on
Oct 11 23:00:29 IQ138000 python3[1922]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:00:29 IQ138000 python3[1922]:    --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:00:29 IQ138000 python3[1922]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:00:29 IQ138000 python3[1922]:            |                model: A7602E-H
Oct 11 23:00:29 IQ138000 python3[1922]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:00:29 IQ138000 python3[1922]:            |            supported: gsm-umts
Oct 11 23:00:29 IQ138000 python3[1922]:            |              current: gsm-umts
Oct 11 23:00:29 IQ138000 python3[1922]:            |         equipment id: 860803062234204
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   System   |               device: wbc
Oct 11 23:00:29 IQ138000 python3[1922]:            |              drivers: option, rndis_host
Oct 11 23:00:29 IQ138000 python3[1922]:            |               plugin: simtech
Oct 11 23:00:29 IQ138000 python3[1922]:            |         primary port: ttyUSB1
Oct 11 23:00:29 IQ138000 python3[1922]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:00:29 IQ138000 python3[1922]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:00:29 IQ138000 python3[1922]:            |                state: enabling
Oct 11 23:00:29 IQ138000 python3[1922]:            |          power state: on
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:00:29 IQ138000 python3[1922]:            |              current: allowed: any; preferred: none
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   3GPP     |                 imei: 860803062234204
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:00:29 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:29 IQ138000 python3[1922]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:29 IQ138000 python3[1922]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:00:29 IQ138000 python3[1922]:            |                       slot 2: none
Oct 11 23:00:29 IQ138000 python3[1922]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 23:00:29 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:29 IQ138000 python3[1922]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 23:00:29 IQ138000 python3[1922]:  successfully requested primary SIM switch in modem
Oct 11 23:00:30 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:30 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:31 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 23:00:31 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:31 IQ138000 wb-rules[4611]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 23:00:31 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:00:31 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 23:00:31 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:00:31 IQ138000 lsyncd[5429]: 23:00:31 Normal: --- Startup ---
Oct 11 23:00:31 IQ138000 lsyncd[5429]: 23:00:31 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:00:31 IQ138000 lsyncd[5429]: journal
Oct 11 23:00:31 IQ138000 lsyncd[5429]: iq_network_manager/iq_network_manager.log
Oct 11 23:00:31 IQ138000 lsyncd[5429]: messages
Oct 11 23:00:31 IQ138000 lsyncd[5435]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:00:31 IQ138000 lsyncd[5434]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:00:31 IQ138000 lsyncd[5434]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 23:00:31 IQ138000 lsyncd[5429]: 23:00:31 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:00:31 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:00:31 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:00:32 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] simple connect started...
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (6/10): register
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 23:00:32 IQ138000 ModemManager[471]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 23:00:33 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 23:00:33 IQ138000 ModemManager[471]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 23:00:33 IQ138000 ModemManager[471]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.2020] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.2032] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.2070] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.2090] ppp-manager: starting PPP connection
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.2221] ppp-manager: pppd started with pid 5445
Oct 11 23:00:33 IQ138000 pppd[5445]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: initializing
Oct 11 23:00:33 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 23:00:33 IQ138000 pppd[5445]: pppd 2.4.9 started by root, uid 0
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 23:00:33 IQ138000 pppd[5445]: Using interface ppp0
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: Using interface ppp0
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 23:00:33 IQ138000 pppd[5445]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 23:00:33 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.2934] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: PAP authentication succeeded
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: kernel does not support PPP filtering
Oct 11 23:00:33 IQ138000 pppd[5445]: PAP authentication succeeded
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 23:00:33 IQ138000 pppd[5445]: kernel does not support PPP filtering
Oct 11 23:00:33 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 23:00:33 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 23:00:33 IQ138000 wb-rules[4611]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 23:00:33 IQ138000 ModemManager[471]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 23:00:33 IQ138000 pppd[5445]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 23:00:33 IQ138000 pppd[5445]: local  IP address 10.136.12.187
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: local  IP address 10.136.12.187
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: remote IP address 10.64.64.64
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: primary   DNS address 172.23.10.131
Oct 11 23:00:33 IQ138000 NetworkManager[5445]: secondary DNS address 172.23.10.130
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 23:00:33 IQ138000 pppd[5445]: remote IP address 10.64.64.64
Oct 11 23:00:33 IQ138000 pppd[5445]: primary   DNS address 172.23.10.131
Oct 11 23:00:33 IQ138000 pppd[5445]: secondary DNS address 172.23.10.130
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.8439] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: ip-up event
Oct 11 23:00:33 IQ138000 pppd[5445]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.8557] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.8585] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.8640] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.8735] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 23:00:33 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:00:33 IQ138000 dbus-daemon[299]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 23:00:33 IQ138000 NetworkManager[404]: <info>  [1760223633.9240] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:33 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:00:33 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:33 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:00:33 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:00:33 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:00:34 IQ138000 NetworkManager[404]: <info>  [1760223634.0054] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:34 IQ138000 NetworkManager[404]: <info>  [1760223634.0067] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 23:00:34 IQ138000 NetworkManager[404]: <info>  [1760223634.0088] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 23:00:34 IQ138000 NetworkManager[404]: <info>  [1760223634.0115] device (ttyUSB1): Activation: successful, device activated.
Oct 11 23:00:34 IQ138000 NetworkManager[404]: <info>  [1760223634.0146] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:34 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 vnstatd[1652]: Info: Interface "ppp0" enabled.
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 ntpd[1648]: Listen normally on 4 ppp0 10.136.12.187:123
Oct 11 23:00:35 IQ138000 ntpd[1648]: new interface(s) found: waking up resolver
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:35 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:36 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:36 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:36 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:36 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 23:00:36 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:00:36 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:00:36 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:00:36 IQ138000 wb-mqtt-knx[1972]: INFO: knxd connected successfully
Oct 11 23:00:36 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:37 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:37 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:37 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:37 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:00:37 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:00:38 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:39 IQ138000 python3[1922]: Выполнение: mmcli -i any
Oct 11 23:00:39 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:39 IQ138000 python3[1922]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 23:00:39 IQ138000 python3[1922]:    -------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:39 IQ138000 python3[1922]:   -------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Properties |            active: yes
Oct 11 23:00:39 IQ138000 python3[1922]:              |              imsi: 250997340491874
Oct 11 23:00:39 IQ138000 python3[1922]:              |             iccid: 8970199210429593744
Oct 11 23:00:39 IQ138000 python3[1922]:              |       operator id: 25099
Oct 11 23:00:39 IQ138000 python3[1922]:              |     operator name: Beeline
Oct 11 23:00:39 IQ138000 python3[1922]: Выполнение: mmcli -m wbc
Oct 11 23:00:39 IQ138000 python3[1922]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:00:39 IQ138000 python3[1922]:    --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:00:39 IQ138000 python3[1922]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:00:39 IQ138000 python3[1922]:            |                model: A7602E-H
Oct 11 23:00:39 IQ138000 python3[1922]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:00:39 IQ138000 python3[1922]:            |            supported: gsm-umts
Oct 11 23:00:39 IQ138000 python3[1922]:            |              current: gsm-umts
Oct 11 23:00:39 IQ138000 python3[1922]:            |         equipment id: 860803062234204
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   System   |               device: wbc
Oct 11 23:00:39 IQ138000 python3[1922]:            |              drivers: option, rndis_host
Oct 11 23:00:39 IQ138000 python3[1922]:            |               plugin: simtech
Oct 11 23:00:39 IQ138000 python3[1922]:            |         primary port: ttyUSB1
Oct 11 23:00:39 IQ138000 python3[1922]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:00:39 IQ138000 python3[1922]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:00:39 IQ138000 python3[1922]:            |                state: connected
Oct 11 23:00:39 IQ138000 python3[1922]:            |          power state: on
Oct 11 23:00:39 IQ138000 python3[1922]:            |          access tech: lte
Oct 11 23:00:39 IQ138000 python3[1922]:            |       signal quality: 93% (recent)
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:00:39 IQ138000 python3[1922]:            |              current: allowed: any; preferred: none
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   3GPP     |                 imei: 860803062234204
Oct 11 23:00:39 IQ138000 python3[1922]:            |          operator id: 25099
Oct 11 23:00:39 IQ138000 python3[1922]:            |        operator name: beeline
Oct 11 23:00:39 IQ138000 python3[1922]:            |         registration: home
Oct 11 23:00:39 IQ138000 python3[1922]:            | packet service state: attached
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:39 IQ138000 python3[1922]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:00:39 IQ138000 python3[1922]:            |                       slot 2: none
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:00:39 IQ138000 python3[1922]: Current state: home
Oct 11 23:00:39 IQ138000 python3[1922]: SIM registered in the network.
Oct 11 23:00:39 IQ138000 python3[1922]: Выполнение: mmcli -m wbc
Oct 11 23:00:39 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:39 IQ138000 python3[1922]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:00:39 IQ138000 python3[1922]:    --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:00:39 IQ138000 python3[1922]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:00:39 IQ138000 python3[1922]:            |                model: A7602E-H
Oct 11 23:00:39 IQ138000 python3[1922]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:00:39 IQ138000 python3[1922]:            |            supported: gsm-umts
Oct 11 23:00:39 IQ138000 python3[1922]:            |              current: gsm-umts
Oct 11 23:00:39 IQ138000 python3[1922]:            |         equipment id: 860803062234204
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   System   |               device: wbc
Oct 11 23:00:39 IQ138000 python3[1922]:            |              drivers: option, rndis_host
Oct 11 23:00:39 IQ138000 python3[1922]:            |               plugin: simtech
Oct 11 23:00:39 IQ138000 python3[1922]:            |         primary port: ttyUSB1
Oct 11 23:00:39 IQ138000 python3[1922]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:00:39 IQ138000 python3[1922]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:00:39 IQ138000 python3[1922]:            |                state: connected
Oct 11 23:00:39 IQ138000 python3[1922]:            |          power state: on
Oct 11 23:00:39 IQ138000 python3[1922]:            |          access tech: lte
Oct 11 23:00:39 IQ138000 python3[1922]:            |       signal quality: 93% (recent)
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:00:39 IQ138000 python3[1922]:            |              current: allowed: any; preferred: none
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   3GPP     |                 imei: 860803062234204
Oct 11 23:00:39 IQ138000 python3[1922]:            |          operator id: 25099
Oct 11 23:00:39 IQ138000 python3[1922]:            |        operator name: beeline
Oct 11 23:00:39 IQ138000 python3[1922]:            |         registration: home
Oct 11 23:00:39 IQ138000 python3[1922]:            | packet service state: attached
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:39 IQ138000 python3[1922]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:00:39 IQ138000 python3[1922]:            |                       slot 2: none
Oct 11 23:00:39 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:00:39 IQ138000 python3[1922]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:39 IQ138000 python3[1922]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:00:39 IQ138000 python3[1922]:    -------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:39 IQ138000 python3[1922]:   -------------------------------
Oct 11 23:00:39 IQ138000 python3[1922]:   Properties |            active: yes
Oct 11 23:00:39 IQ138000 python3[1922]:              |              imsi: 250997340491874
Oct 11 23:00:39 IQ138000 python3[1922]:              |             iccid: 8970199210429593744
Oct 11 23:00:39 IQ138000 python3[1922]:              |       operator id: 25099
Oct 11 23:00:39 IQ138000 python3[1922]:              |     operator name: Beeline
Oct 11 23:00:40 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:40 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:40 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:40 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:40 IQ138000 ntpd[1648]: Soliciting pool server 92.255.126.11
Oct 11 23:00:40 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:41 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:00:41 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:41 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:00:41 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:41 IQ138000 ntpd[1648]: Soliciting pool server 90.188.9.144
Oct 11 23:00:41 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:41 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:42 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:42 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:42 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:42 IQ138000 ntpd[1648]: Soliciting pool server 176.58.60.71
Oct 11 23:00:42 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:42 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:00:43 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:43 IQ138000 ntpd[1648]: Soliciting pool server 151.0.2.54
Oct 11 23:00:43 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:00:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:00:44 IQ138000 wb-mqtt-serial[1661]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:00:44 IQ138000 python3[1922]: Выполнение: mmcli -m wbc
Oct 11 23:00:44 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:00:44 IQ138000 python3[1922]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:00:44 IQ138000 python3[1922]:    --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:00:44 IQ138000 python3[1922]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:00:44 IQ138000 python3[1922]:            |                model: A7602E-H
Oct 11 23:00:44 IQ138000 python3[1922]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:00:44 IQ138000 python3[1922]:            |            supported: gsm-umts
Oct 11 23:00:44 IQ138000 python3[1922]:            |              current: gsm-umts
Oct 11 23:00:44 IQ138000 python3[1922]:            |         equipment id: 860803062234204
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   System   |               device: wbc
Oct 11 23:00:44 IQ138000 python3[1922]:            |              drivers: option, rndis_host
Oct 11 23:00:44 IQ138000 python3[1922]:            |               plugin: simtech
Oct 11 23:00:44 IQ138000 python3[1922]:            |         primary port: ttyUSB1
Oct 11 23:00:44 IQ138000 python3[1922]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:00:44 IQ138000 python3[1922]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:00:44 IQ138000 python3[1922]:            |                state: connected
Oct 11 23:00:44 IQ138000 python3[1922]:            |          power state: on
Oct 11 23:00:44 IQ138000 python3[1922]:            |          access tech: lte
Oct 11 23:00:44 IQ138000 python3[1922]:            |       signal quality: 93% (recent)
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:00:44 IQ138000 python3[1922]:            |              current: allowed: any; preferred: none
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   3GPP     |                 imei: 860803062234204
Oct 11 23:00:44 IQ138000 python3[1922]:            |          operator id: 25099
Oct 11 23:00:44 IQ138000 python3[1922]:            |        operator name: beeline
Oct 11 23:00:44 IQ138000 python3[1922]:            |         registration: home
Oct 11 23:00:44 IQ138000 python3[1922]:            | packet service state: attached
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:00:44 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:44 IQ138000 python3[1922]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:44 IQ138000 python3[1922]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:00:45 IQ138000 python3[1922]:            |                       slot 2: none
Oct 11 23:00:45 IQ138000 python3[1922]:   --------------------------------
Oct 11 23:00:45 IQ138000 python3[1922]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:00:45 IQ138000 python3[1922]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:45 IQ138000 python3[1922]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:00:45 IQ138000 python3[1922]:    -------------------------------
Oct 11 23:00:45 IQ138000 python3[1922]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:00:45 IQ138000 python3[1922]:   -------------------------------
Oct 11 23:00:45 IQ138000 python3[1922]:   Properties |            active: yes
Oct 11 23:00:45 IQ138000 python3[1922]:              |              imsi: 250997340491874
Oct 11 23:00:45 IQ138000 python3[1922]:              |             iccid: 8970199210429593744
Oct 11 23:00:45 IQ138000 python3[1922]:              |       operator id: 25099
Oct 11 23:00:45 IQ138000 python3[1922]:              |     operator name: Beeline
Oct 11 23:00:45 IQ138000 ntpd[1648]: Soliciting pool server 37.9.13.54
Oct 11 23:00:46 IQ138000 ntpd[1648]: Soliciting pool server 78.153.129.131
Oct 11 23:00:47 IQ138000 wb-mqtt-serial[1661]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:00:47 IQ138000 ntpd[1648]: Soliciting pool server 213.108.170.26
-- Boot a17298712c8341dab225a3941522c3fb --
Oct 11 23:04:48 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:04:48 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:04:48 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:04:48 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:04:48 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:04:48 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:04:48 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:04:48 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:04:48 IQ138000 kernel: Zone ranges:
Oct 11 23:04:48 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:04:48 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:04:48 IQ138000 kernel: Movable zone start for each node
Oct 11 23:04:48 IQ138000 kernel: Early memory node ranges
Oct 11 23:04:48 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:04:48 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:04:48 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:04:48 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:04:48 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:04:48 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:04:48 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:04:48 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:04:48 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:04:48 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:04:48 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:04:48 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:04:48 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:04:48 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:04:48 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:04:48 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:04:48 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:04:48 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:04:48 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:04:48 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:04:48 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:04:48 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:04:48 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:04:48 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:04:48 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:04:48 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:04:48 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:04:48 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:04:48 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:04:48 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:04:48 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:04:48 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:04:48 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:04:48 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:04:48 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:04:48 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:04:48 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:04:48 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:04:48 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:04:48 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:04:48 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:04:48 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:04:48 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:04:48 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:04:48 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:04:48 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:04:48 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:04:48 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:04:48 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:04:48 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:04:48 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:04:48 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:04:48 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:04:48 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:04:48 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:04:48 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:04:48 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:04:48 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:04:48 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:04:48 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:04:48 IQ138000 kernel: No ATAGs?
Oct 11 23:04:48 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:04:48 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:04:48 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:04:48 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:04:48 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:04:48 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:04:48 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:04:48 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:04:48 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:04:48 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:04:48 IQ138000 kernel: PTP clock support registered
Oct 11 23:04:48 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:04:48 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:04:48 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:04:48 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:04:48 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:04:48 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:04:48 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:04:48 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:04:48 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:04:48 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:04:48 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:04:48 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:04:48 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:04:48 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:04:48 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:04:48 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:04:48 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:04:48 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:04:48 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:04:48 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:04:48 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:04:48 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:04:48 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:04:48 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:04:48 IQ138000 kernel: brd: module loaded
Oct 11 23:04:48 IQ138000 kernel: loop: module loaded
Oct 11 23:04:48 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:04:48 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:04:48 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:04:48 IQ138000 kernel: CAN device driver interface
Oct 11 23:04:48 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:04:48 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:04:48 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:04:48 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:04:48 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:04:48 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:04:48 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:04:48 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:04:48 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:04:48 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:04:48 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:04:48 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:04:48 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:04:48 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:04:48 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:04:48 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:04:48 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:04:48 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:04:48 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:04:48 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:04:48 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:04:48 IQ138000 kernel: can: controller area network core
Oct 11 23:04:48 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:04:48 IQ138000 kernel: can: raw protocol
Oct 11 23:04:48 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:04:48 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:04:48 IQ138000 kernel: can: SAE J1939
Oct 11 23:04:48 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:04:48 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:04:48 IQ138000 kernel: registered taskstats version 1
Oct 11 23:04:48 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:04:48 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:04:48 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:04:48 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:04:48 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:04:48 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:04:48 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:04:48 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:04:48 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:04:44 UTC (1760223884)
Oct 11 23:04:48 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:04:48 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:04:48 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:04:48 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:04:48 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:04:48 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:04:48 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:04:48 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:04:48 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:04:48 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:04:48 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:04:48 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:04:48 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:04:48 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:04:48 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: random: fast init done
Oct 11 23:04:48 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:04:48 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:04:48 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:04:48 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:04:48 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:04:48 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:04:48 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:04:48 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:04:48 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:04:48 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:04:48 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:04:48 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:04:48 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:04:48 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:04:48 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:04:48 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:04:48 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:04:48 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:04:48 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:04:48 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:04:48 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:04:48 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:04:48 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:04:48 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:04:48 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:04:48 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:04:48 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:04:48 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:04:48 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:04:48 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:04:48 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:04:48 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:04:48 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:04:48 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:04:48 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:04:48 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:04:48 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:04:48 IQ138000 kernel: of_cfs_init
Oct 11 23:04:48 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:04:48 IQ138000 kernel: ALSA device list:
Oct 11 23:04:48 IQ138000 kernel:   No soundcards found.
Oct 11 23:04:48 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:04:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:04:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:04:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:04:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:04:48 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:04:48 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:04:48 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:04:48 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:04:48 IQ138000 kernel:   with arguments:
Oct 11 23:04:48 IQ138000 kernel:     /sbin/init
Oct 11 23:04:48 IQ138000 kernel:   with environment:
Oct 11 23:04:48 IQ138000 kernel:     HOME=/
Oct 11 23:04:48 IQ138000 kernel:     TERM=linux
Oct 11 23:04:48 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:04:48 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:04:48 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:04:48 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:04:48 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:04:48 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:04:48 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:04:48 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:04:48 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:04:48 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:04:48 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:04:48 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:04:48 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:04:48 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:04:48 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:04:48 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:04:48 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:04:48 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:04:48 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:04:48 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:04:48 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:04:48 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:04:48 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:04:48 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:04:48 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:04:48 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:04:48 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:04:48 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:04:48 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:04:48 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:04:48 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:04:48 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:04:48 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:04:48 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:04:48 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:04:48 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:04:48 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:04:48 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:04:48 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:04:48 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:04:48 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:04:48 IQ138000 systemd-journald[139]: Journal started
Oct 11 23:04:48 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:04:48 IQ138000 systemd-fsck[143]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
Oct 11 23:04:48 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:04:48 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:04:48 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:04:48 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:04:48 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:04:48 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:04:48 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:04:48 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:04:48 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:04:49 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:04:49 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:04:49 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:04:49 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:04:49 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:04:49 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:04:49 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:04:49 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:04:49 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:04:49 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:04:49 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:04:49 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:04:49 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:04:49 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:04:49 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:04:50 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 23:04:50 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:04:50 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:04:50 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:04:50 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:04:50 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:04:50 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:04:50 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:04:50 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:04:50 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:04:50 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 23:04:50 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:04:50 IQ138000 systemd-udevd[164]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:04:50 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:04:50 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:04:50 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:04:50 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:04:50 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:04:50 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:04:50 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:04:50 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:04:50 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:04:50 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:04:50 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:04:50 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:04:50 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:04:51 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:04:51 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:04:51 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:04:51 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:04:51 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:04:51 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 23:04:51 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:04:51 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:04:51 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:04:51 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:04:51 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:04:51 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:04:51 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:04:51 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:04:51 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:04:51 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:04:51 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:04:51 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:04:51 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:04:51 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:04:51 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:04:51 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:04:51 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:04:51 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 23:04:51 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:04:51 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:04:51 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:04:51 IQ138000 systemd-fsck[214]: data: clean, 16462/328656 files, 373709/1313536 blocks
Oct 11 23:04:51 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:04:51 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:04:51 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:04:51 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:04:51 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:04:51 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:04:51 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:04:51 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:04:52 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:04:52 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.329ms for 461 entries.
Oct 11 23:04:52 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 23:04:52 IQ138000 kernel: random: crng init done
Oct 11 23:04:52 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 23:04:52 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 23:04:52 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 23:04:52 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 23:04:52 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 23:04:52 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 23:04:52 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 23:04:52 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 23:04:52 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 23:04:52 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 23:04:53 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 23:04:53 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 23:04:53 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 23:04:53 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 23:04:53 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 23:04:53 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 23:04:53 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 23:04:53 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 23:04:53 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 23:04:53 IQ138000 systemd[1]: Reached target Timers.
Oct 11 23:04:53 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 23:04:53 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 23:04:53 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 23:04:53 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 23:04:53 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 23:04:53 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 23:04:53 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:04:53 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 23:04:53 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 23:04:53 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 23:04:53 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 23:04:53 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 23:04:53 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 23:04:53 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:04:53 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 23:04:53 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 23:04:53 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 23:04:53 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 23:04:53 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 23:04:53 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 23:04:53 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 23:04:53 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 23:04:53 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:04:53 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:04:53 IQ138000 wb-watchdog[322]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 23:04:53 IQ138000 migrate.sh[321]: Error: No such file or directory
Oct 11 23:04:53 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:04:53 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 23:04:53 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 23:04:54 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:04:54 IQ138000 migrate.sh[330]: Error: No such file or directory
Oct 11 23:04:54 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 23:04:54 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:04:54 IQ138000 migrate.sh[342]: Error: No such file or directory
Oct 11 23:04:54 IQ138000 reverse-ssh.sh[338]: Error: No such file or directory
Oct 11 23:04:54 IQ138000 systemd[1]: Started watch config files.
Oct 11 23:04:54 IQ138000 polkitd[326]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 23:04:54 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 23:04:54 IQ138000 rules-preprocessor[334]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:04:54 IQ138000 rules-preprocessor[334]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:04:54 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 23:04:54 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 23:04:54 IQ138000 migrate.sh[356]: Error: No such file or directory
Oct 11 23:04:54 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 23:04:54 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 23:04:54 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 23:04:54 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Successfully dropped root privileges.
Oct 11 23:04:54 IQ138000 migrate.sh[366]: Error: No such file or directory
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: avahi-daemon 0.8 starting up.
Oct 11 23:04:54 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Successfully called chroot().
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Successfully dropped remaining capabilities.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: No service file found in /etc/avahi/services.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv6 for mDNS.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: New relevant interface lo.IPv4 for mDNS.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Network interface enumeration completed.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Registering new address record for ::1 on lo.*.
Oct 11 23:04:54 IQ138000 avahi-daemon[363]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 23:04:54 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:04:54 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 23:04:54 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 23:04:54 IQ138000 wb-watch-configs[389]: Watched dirs: /etc /etc/network
Oct 11 23:04:54 IQ138000 systemd-logind[340]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 23:04:54 IQ138000 wpa_supplicant[374]: Successfully initialized wpa_supplicant
Oct 11 23:04:54 IQ138000 systemd-logind[340]: New seat seat0.
Oct 11 23:04:54 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 23:04:54 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 23:04:54 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:04:54 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 23:04:54 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 23:04:54 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 23:04:54 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:04:54 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:04:54 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:04:54 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:04:54 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 23:04:54 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 23:04:54 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:04:54 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:04:54 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 23:04:54 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 23:04:54 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 23:04:54 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:04:54 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:04:54 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 23:04:55 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 23:04:55 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 23:04:55 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.1583] NetworkManager (version 1.42.4) is starting... (boot:a1729871-2c83-41da-b225-a3941522c3fb)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.1592] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 23:04:55 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.1728] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 23:04:55 IQ138000 monit[324]: Starting daemon monitor: monit.
Oct 11 23:04:55 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 23:04:55 IQ138000 avahi-daemon[363]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3754541020.
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.2255] manager[0x6d6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 23:04:55 IQ138000 systemd[1]: Started User Login Management.
Oct 11 23:04:55 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 23:04:55 IQ138000 systemd[1]: Started Network Manager.
Oct 11 23:04:55 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 23:04:55 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 23:04:55 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 23:04:55 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 23:04:55 IQ138000 ModemManager[472]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 23:04:55 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 23:04:55 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8183] hostname: hostname: using hostnamed
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8187] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8229] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8341] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8363] manager[0x6d6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8366] manager[0x6d6900]: rfkill: WWAN hardware radio set enabled
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8709] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8791] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.8895] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 23:04:55 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9199] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9250] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9300] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9317] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9342] manager: Networking is enabled by state file
Oct 11 23:04:55 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9448] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9451] settings: Loaded settings plugin: keyfile (internal)
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9453] ifupdown: management mode: unmanaged
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9454] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 23:04:55 IQ138000 NetworkManager[404]: <info>  [1760223895.9455] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 23:04:55 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0114] dhcp: init: Using DHCP client 'internal'
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0136] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0251] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0294] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0394] device (lo): Activation: starting connection 'lo' (8f46c58b-2aa2-48f9-93a5-dc3c2deeea32)
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0467] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.0493] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:04:56 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:04:56 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.4006] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.4027] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.4130] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.4166] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:04:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 23:04:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 23:04:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 23:04:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 23:04:56 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.6147] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.6239] device (wlan0): driver supports Access Point (AP) mode
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.6331] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 23:04:56 IQ138000 NetworkManager[404]: <info>  [1760223896.6379] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:04:56 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 23:04:57 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.5022] device (wlan1): driver supports Access Point (AP) mode
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.5123] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.5199] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.5903] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.5921] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.5984] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 wpa_supplicant[374]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.6376] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.6413] modem-manager: ModemManager available
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.6495] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.6520] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.6588] device (lo): Activation: successful, device activated.
Oct 11 23:04:57 IQ138000 wpa_supplicant[374]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.9834] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.9841] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.9861] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.9880] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.9988] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 23:04:57 IQ138000 NetworkManager[404]: <info>  [1760223897.9994] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 23:04:58 IQ138000 NetworkManager[404]: <info>  [1760223898.0014] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 23:04:58 IQ138000 NetworkManager[404]: <info>  [1760223898.0033] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:04:58 IQ138000 NetworkManager[404]: <info>  [1760223898.0069] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:04:58 IQ138000 NetworkManager[404]: <info>  [1760223898.0110] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:04:58 IQ138000 NetworkManager[404]: <info>  [1760223898.0127] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:04:58 IQ138000 NetworkManager[404]: <info>  [1760223898.0172] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:04:58 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 23:04:58 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 23:04:58 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 23:05:01 IQ138000 init.sh[1318]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 23:05:01 IQ138000 init.sh[1333]: In file included from -:16:
Oct 11 23:05:01 IQ138000 init.sh[1333]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:01 IQ138000 wpa_supplicant[374]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:05:01 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:05:01 IQ138000 init.sh[1318]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 23:05:01 IQ138000 CRON[1359]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 23:05:01 IQ138000 CRON[1376]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 23:05:01 IQ138000 CRON[1359]: pam_unix(cron:session): session closed for user root
Oct 11 23:05:01 IQ138000 init.sh[1318]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 23:05:01 IQ138000 init.sh[1402]: In file included from -:11:
Oct 11 23:05:01 IQ138000 init.sh[1402]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:02 IQ138000 init.sh[1318]: ...
Oct 11 23:05:02 IQ138000 init.sh[1417]: In file included from -:11:
Oct 11 23:05:02 IQ138000 init.sh[1417]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:02 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 23:05:02 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 23:05:02 IQ138000 init.sh[1318]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 23:05:02 IQ138000 init.sh[1436]: In file included from -:24:
Oct 11 23:05:02 IQ138000 init.sh[1436]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:02 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:05:02 IQ138000 init.sh[1318]: ...
Oct 11 23:05:02 IQ138000 init.sh[1452]: In file included from -:24:
Oct 11 23:05:02 IQ138000 init.sh[1452]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:03 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 23:05:03 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 23:05:03 IQ138000 init.sh[1318]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 23:05:03 IQ138000 init.sh[1474]: In file included from -:11:
Oct 11 23:05:03 IQ138000 init.sh[1474]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:03 IQ138000 init.sh[1318]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 23:05:03 IQ138000 init.sh[1497]: In file included from -:11:
Oct 11 23:05:03 IQ138000 init.sh[1497]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:05:03 IQ138000 init.sh[1318]: ...
Oct 11 23:05:03 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 23:05:03 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 23:05:03 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 23:05:03 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 23:05:03 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 23:05:04 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 23:05:04 IQ138000 systemd[1]: Reached target Network.
Oct 11 23:05:04 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 23:05:04 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 23:05:04 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:05:04 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:05:04 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 23:05:04 IQ138000 lsyncd[1622]: 23:05:04 Normal: --- Startup ---
Oct 11 23:05:04 IQ138000 knxd[1616]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:05:04 IQ138000 knxd[1616]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:05:04 IQ138000 lsyncd[1622]: 23:05:04 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:05:04 IQ138000 lsyncd[1622]: iq_network_manager/iq_network_manager.log
Oct 11 23:05:04 IQ138000 lsyncd[1622]: messages
Oct 11 23:05:04 IQ138000 lsyncd[1622]: journal
Oct 11 23:05:04 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 23:05:04 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:05:04 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 23:05:04 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 23:05:04 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 23:05:04 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 23:05:04 IQ138000 ntpd[1629]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 23:05:04 IQ138000 ntpd[1629]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 23:05:04 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 23:05:04 IQ138000 ntpd[1629]: ntp-4 is maintained by Network Time Foundation,
Oct 11 23:05:04 IQ138000 ntpd[1629]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 23:05:04 IQ138000 ntpd[1629]: corporation.  Support and training for ntp-4 are
Oct 11 23:05:04 IQ138000 ntpd[1629]: available at https://www.nwtime.org/support
Oct 11 23:05:04 IQ138000 ntpd[1629]: ----------------------------------------------------
Oct 11 23:05:04 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 23:05:04 IQ138000 lsyncd[1641]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:05:04 IQ138000 ntpd[1658]: proto: precision = 1.042 usec (-20)
Oct 11 23:05:04 IQ138000 lsyncd[1630]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:05:04 IQ138000 lsyncd[1630]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 23:05:04 IQ138000 lsyncd[1622]: 23:05:04 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:05:04 IQ138000 ntpd[1658]: basedate set to 2020-09-11
Oct 11 23:05:04 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 23:05:04 IQ138000 ntpd[1658]: gps base set to 2020-09-13 (week 2123)
Oct 11 23:05:04 IQ138000 ntpd[1658]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 23:05:04 IQ138000 ntpd[1658]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 23:05:04 IQ138000 ntpd[1658]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 23:05:04 IQ138000 ntpd[1658]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 23:05:04 IQ138000 ntpd[1658]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 23:05:04 IQ138000 ntpd[1658]: Listen normally on 3 lo [::1]:123
Oct 11 23:05:04 IQ138000 ntpd[1658]: Listening on routing socket on fd #20 for interface updates
Oct 11 23:05:04 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 23:05:04 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 23:05:04 IQ138000 persist_meter_data.sh[1656]: Error: No such file or directory
Oct 11 23:05:04 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:05:05 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:05:05 IQ138000 wb-knxd-config.sh[1526]: No /dev/ttyKNX found, disabling level2
Oct 11 23:05:05 IQ138000 wb-knxd-config.sh[1526]: Restart knxd
Oct 11 23:05:05 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 23:05:05 IQ138000 wb-mqtt-w1[1681]: MQTT broker localhost:1883
Oct 11 23:05:05 IQ138000 wb-mqtt-w1[1681]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:05 IQ138000 wb-mqtt-w1[1681]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:05:05 IQ138000 wb-mqtt-w1[1681]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 23:05:05 IQ138000 wb-mqtt-w1[1681]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 23:05:05 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:05:05 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:05:05 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 23:05:05 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 23:05:05 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:05:05 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 23:05:05 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 23:05:05 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:05 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:05:05 IQ138000 wb-connection-manager[1514]: Connection LegacyWiFi not found, skipping
Oct 11 23:05:05 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:05:05 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:05:05 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 23:05:05 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:05 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 23:05:05 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 23:05:05 IQ138000 wb-connection-manager[1514]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 23:05:05 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:05:05 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 23:05:05 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 23:05:05 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 23:05:05 IQ138000 sshd[1737]: Server listening on 0.0.0.0 port 22.
Oct 11 23:05:05 IQ138000 sshd[1737]: Server listening on :: port 22.
Oct 11 23:05:05 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 23:05:05 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 23:05:05 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 23:05:05 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 23:05:05 IQ138000 wb-connection-manager[1514]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 23:05:05 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 23:05:05 IQ138000 ntpd[1658]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:05:05 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 23:05:05 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 23:05:05 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 23:05:05 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:06 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 23:05:06 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 23:05:06 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:05:06 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:05:06 IQ138000 vnstatd[1660]: Info: vnStat daemon 2.6 started. (pid:1660 uid:110 gid:117 64-bit)
Oct 11 23:05:06 IQ138000 vnstatd[1660]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <error> [1760223906.2659] audit: failed to open auditd socket: Protocol not supported
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.2663] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1514 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 23:05:06 IQ138000 wb-connection-manager[1514]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 23:05:06 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 23:05:06 IQ138000 vnstatd[1660]: Info: Interface "ppp0" disabled.
Oct 11 23:05:06 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:05:06 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:05:06 IQ138000 knxd[1830]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:05:06 IQ138000 knxd[1830]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:05:06 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 23:05:06 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 23:05:06 IQ138000 wpa_supplicant[374]: wlan0: Reject scan trigger since one is already pending
Oct 11 23:05:06 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 23:05:06 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:05:06 IQ138000 reverse-ssh.sh[1868]: Error: No such file or directory
Oct 11 23:05:06 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 23:05:06 IQ138000 ntpd[1658]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:05:06 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:06 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8035] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8040] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1514 uid=0 result="success"
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8046] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8150] manager: NetworkManager state is now CONNECTING
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8200] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8225] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8227] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 23:05:06 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:06 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:05:06 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.8849] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:05:06 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9077] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9098] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9103] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9104] Config: added 'scan_ssid' value '1'
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9105] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9106] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 23:05:06 IQ138000 NetworkManager[404]: <info>  [1760223906.9107] Config: added 'psk' value '<hidden>'
Oct 11 23:05:06 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:06 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:05:07 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 23:05:07 IQ138000 NetworkManager[404]: <info>  [1760223907.1181] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 23:05:07 IQ138000 NetworkManager[404]: <info>  [1760223907.1184] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 23:05:07 IQ138000 wb-adjust-systime[1867]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Warning: Error resolving bridge address: Name or service not known.
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 23:05:07 IQ138000 mosquitto[1921]: 1760223907: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 23:05:07 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 23:05:07 IQ138000 wb-adjust-systime[1867]: Drift file is valid (was recently edited)
Oct 11 23:05:07 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 23:05:07 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 23:05:07 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 23:05:07 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 23:05:07 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 23:05:07 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 23:05:07 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 23:05:07 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 23:05:07 IQ138000 ntpd[1658]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:05:07 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 23:05:07 IQ138000 wb-mqtt-db[2002]: MQTT broker localhost:1883
Oct 11 23:05:07 IQ138000 wb-mqtt-db[2002]: Config file /etc/wb-mqtt-db.conf
Oct 11 23:05:07 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 23:05:07 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:07 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:07 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 23:05:07 IQ138000 systemd[1]: Started metrics sender.
Oct 11 23:05:08 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 23:05:08 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 23:05:08 IQ138000 wb-mqtt-knx[2018]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:08 IQ138000 wb-mqtt-knx[2018]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:08 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 23:05:08 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] Creating tables if necessary
Oct 11 23:05:08 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] Create indices if necessary
Oct 11 23:05:08 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] Analyzing data table
Oct 11 23:05:08 IQ138000 wb-mqtt-logs[2028]: MQTT broker localhost:1883
Oct 11 23:05:08 IQ138000 wb-mqtt-logs[2028]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:08 IQ138000 wb-mqtt-logs[2028]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:05:08 IQ138000 wb-mqtt-iec104[2015]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:05:08 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:05:08 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.662s CPU time.
Oct 11 23:05:08 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 23:05:08 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 23:05:08 IQ138000 ntpd[1658]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:05:08 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 23:05:08 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:08 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:08 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:08 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:08 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:09 IQ138000 wb-mqtt-iec104[2118]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 23:05:09 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:05:09 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:05:09 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:05:09 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:05:09 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:05:09 IQ138000 wb-mqtt-opcua[2048]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 23:05:09 IQ138000 wb-mqtt-confed[1996]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:05:09 IQ138000 wb-mqtt-confed[1996]: INFO: [wbgo_mqtt] confed-IQ138000-1996: MQTT connection established
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [gpio driver] Started
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:05:09 IQ138000 wb-mqtt-gpio[1884]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:05:09 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 23:05:09 IQ138000 wb-mqtt-iec104[2118]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 23:05:09 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 23:05:09 IQ138000 wb-mqtt-mbgate[2033]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 23:05:09 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 23:05:10 IQ138000 wb-mqtt-opcua[2180]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 23:05:10 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 23:05:10 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 23:05:10 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 23:05:10 IQ138000 wb-mqtt-opcua[2180]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 23:05:10 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:10 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 23:05:10 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:05:10 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 23:05:11 IQ138000 wb-mqtt-logs[2028]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:11 IQ138000 wb-mqtt-logs[2028]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:11 IQ138000 wb-mqtt-logs[2028]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:11 IQ138000 wb-mqtt-logs[2028]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:05:11 IQ138000 wb-mqtt-knx[2018]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:11 IQ138000 wb-mqtt-knx[2018]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:11 IQ138000 wb-mqtt-knx[2018]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:11 IQ138000 wb-mqtt-knx[2018]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:05:11 IQ138000 wb-mqtt-knx[2018]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 23:05:12 IQ138000 python3[1970]: No data file found at /tmp/network_status_cache.json
Oct 11 23:05:12 IQ138000 python3[1970]: Connecting to MQTT
Oct 11 23:05:12 IQ138000 NetworkManager[404]: <info>  [1760223912.9384] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 23:05:12 IQ138000 NetworkManager[404]: <info>  [1760223912.9387] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 23:05:13 IQ138000 python3[1970]: Connected to MQTT
Oct 11 23:05:13 IQ138000 python3[1970]: Connection returned result: Connection Accepted.
Oct 11 23:05:14 IQ138000 wb-device-manager[1984]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 23:05:14 IQ138000 wb-device-manager[1984]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 23:05:14 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2043 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 23:05:14 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New virtual device lo 8f46c58b-2aa2-48f9-93a5-dc3c2deeea32 /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:05:15 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:15 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:15 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New active connection lo 8f46c58b-2aa2-48f9-93a5-dc3c2deeea32 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 23:05:16 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 23:05:16 IQ138000 kernel: dc5ldo: disabling
Oct 11 23:05:16 IQ138000 kernel: dldo4: disabling
Oct 11 23:05:16 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 23:05:16 IQ138000 kernel: vcc-sd: disabling
Oct 11 23:05:16 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:17 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:05:17 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:05:17 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:05:17 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:05:17 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:05:17 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 23:05:17 IQ138000 knxd[3091]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:05:17 IQ138000 knxd[3091]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:05:17 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:05:17 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:17 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:05:17 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: MQTT broker localhost:1883
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 11
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 1
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] ADC worker thread is started
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:05:17 IQ138000 wb-mqtt-adc[3129]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-confed[1996]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 23:05:18 IQ138000 wb-mqtt-serial[1669]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 23:05:19 IQ138000 wb-gsm[3343]: main: Called from pid 1 (systemd)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 23:05:19 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 23:05:20 IQ138000 wb-usb-otg-start.sh[3399]: : wb-usb-otg-start
Oct 11 23:05:20 IQ138000 wb-usb-otg-start.sh[3399]: main: setup_device()
Oct 11 23:05:20 IQ138000 wb-gsm[3386]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 23:05:20 IQ138000 wb-mqtt-db[2002]: INFO: [sqlite] DB initialization is done
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 23:05:20 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 23:05:20 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 23:05:20 IQ138000 kernel: using random self ethernet address
Oct 11 23:05:20 IQ138000 kernel: using random host ethernet address
Oct 11 23:05:20 IQ138000 wb-usb-otg-start.sh[3399]: main: enabling profile rndis
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1936)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1943)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1950)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1963)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1976)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 1989)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2002)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2015)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2028)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 23:05:20 IQ138000 wb-gsm[3457]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 23:05:20 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 23:05:20 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 23:05:20 IQ138000 systemd-udevd[3409]: Using default interface naming scheme 'v247'.
Oct 11 23:05:20 IQ138000 NetworkManager[404]: <info>  [1760223920.8027] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 23:05:20 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 23:05:20 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2414)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2441)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2456)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2463)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2470)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2483)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2496)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2509)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2522)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2535)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 23:05:20 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 23:05:21 IQ138000 NetworkManager[404]: <info>  [1760223921.0408] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3006)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3013)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3020)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3027)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 23:05:21 IQ138000 wb-gsm[3513]: should_enable: Should enable GSM modem
Oct 11 23:05:21 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 23:05:21 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 23:05:21 IQ138000 NetworkManager[404]: <info>  [1760223921.7550] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 23:05:21 IQ138000 NetworkManager[404]: <info>  [1760223921.7553] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 23:05:21 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 23:05:22 IQ138000 npm[1689]: > zigbee2mqtt@2.1.1 start
Oct 11 23:05:22 IQ138000 npm[1689]: > node index.js
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 23:05:22 IQ138000 wb-gsm[3608]: main: Called from pid 3514 (wb-gsm-mm)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:05:22 IQ138000 wb-gsm[3625]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:05:22 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:05:23 IQ138000 python3[1970]: Выполнение: service wb-connection-manager stop
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:05:23 IQ138000 wb-gsm[3651]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 23:05:23 IQ138000 ModemManager[472]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:23 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 23:05:24 IQ138000 npm[3578]: Starting Zigbee2MQTT without watchdog.
Oct 11 23:05:24 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: DB logger started, go to main loop
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:25 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 23:05:25 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 23:05:26 IQ138000 wb-mqtt-db[2002]: INFO: [mqtt] subscription succeeded (message id 459)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 23:05:26 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:27 IQ138000 wb-gsm[4008]: mm_off: Modem is already OFF
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:27 IQ138000 wb-gsm[4077]: main: Called from pid 3514 (wb-gsm-mm)
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:05:27 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:05:27 IQ138000 wb-gsm[4089]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:05:28 IQ138000 wb-gsm[4112]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:28 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:05:29 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:30 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:31 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 23:05:31 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:05:31 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:31 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:31 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:31 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:31 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:31 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:05:31 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:31 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:05:31 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:05:31 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:31 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:05:31 IQ138000 knxd[4423]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:05:31 IQ138000 knxd[4423]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:05:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:05:31 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 23:05:31 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:31 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:05:31 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 23:05:31 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:05:31 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: MQTT broker localhost:1883
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:05:31 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:05:31 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 23:05:31 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 23:05:31 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.231s CPU time.
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:31 IQ138000 python3[1970]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 23:05:31 IQ138000 python3[1970]:  
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: w1 thread Started
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:05:31 IQ138000 wb-mqtt-w1[4435]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:05:31 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 4 input(s) @ 8728 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <warn>  [1760223932.5277] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <info>  [1760223932.5279] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <info>  [1760223932.5300] manager: NetworkManager state is now DISCONNECTED
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <warn>  [1760223932.5320] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <info>  [1760223932.5335] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:05:32 IQ138000 wpa_supplicant[374]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:05:32 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <info>  [1760223932.5727] manager: startup complete
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <info>  [1760223932.5751] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 23:05:32 IQ138000 NetworkManager[404]: <info>  [1760223932.5754] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 23:05:32 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 23:05:32 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 23:05:32 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 23:05:32 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:32 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:33 IQ138000 wpa_supplicant[374]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:05:33 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:05:33 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:05:34 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:05:34 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:05:35 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 9985 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:05:35 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:36 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:05:36 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 23:05:36 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:05:36 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 23:05:36 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 23:05:36 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:05:36 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:05:36 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:05:36 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:05:36 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:05:36 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:05:36 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:36 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:05:36 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 23:05:36 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:05:36 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 23:05:36 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 23:05:36 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 23:05:36 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 23:05:36 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:36 IQ138000 watchdog[4629]: starting daemon (5.16):
Oct 11 23:05:36 IQ138000 watchdog[4629]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 23:05:36 IQ138000 watchdog[4629]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 23:05:36 IQ138000 watchdog[4629]:  ping: no machine to check
Oct 11 23:05:36 IQ138000 watchdog[4629]:  file: no file to check
Oct 11 23:05:36 IQ138000 watchdog[4629]:  pidfile: /var/run/sshd.pid
Oct 11 23:05:36 IQ138000 watchdog[4629]:  interface: no interface to check
Oct 11 23:05:36 IQ138000 watchdog[4629]:  temperature: no sensors to check
Oct 11 23:05:36 IQ138000 watchdog[4629]:  no test binary files
Oct 11 23:05:36 IQ138000 watchdog[4629]:  no repair binary files
Oct 11 23:05:36 IQ138000 watchdog[4629]:  error retry time-out = 30 seconds
Oct 11 23:05:36 IQ138000 watchdog[4629]:  repair attempts = 1
Oct 11 23:05:36 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 23:05:36 IQ138000 watchdog[4629]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 23:05:36 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 23:05:36 IQ138000 watchdog[4629]: watchdog now set to 120 seconds
Oct 11 23:05:36 IQ138000 watchdog[4629]: hardware watchdog identity: WBEC WDT
Oct 11 23:05:36 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:36 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 23:05:36 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 23:05:36 IQ138000 systemd[1]: Startup finished in 3.793s (kernel) + 50.087s (userspace) = 53.881s.
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-rules[4620]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:05:36 IQ138000 wb-rules[4620]: INFO: driver is created
Oct 11 23:05:36 IQ138000 wb-rules[4620]: INFO: driver loop is started
Oct 11 23:05:36 IQ138000 wb-rules[4620]: INFO: wait for driver to become ready
Oct 11 23:05:36 IQ138000 wb-rules[4620]: INFO: [wbgo_mqtt] rules-IQ138000-4620: MQTT connection established
Oct 11 23:05:36 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:36 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:37 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:37 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:38 IQ138000 wb-rules[4620]: INFO: driver is ready
Oct 11 23:05:38 IQ138000 wb-rules[4620]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 23:05:38 IQ138000 wb-rules[4620]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4620: MQTT connection established
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:05:38 IQ138000 wb-rules[4620]: INFO: [engine] Starting main loop
Oct 11 23:05:38 IQ138000 wb-rules[4620]: INFO: [engine] Starting sync loop
Oct 11 23:05:38 IQ138000 wb-rules[4620]: INFO: the engine is ready
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:05:38 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:39 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-rules[4620]: WARNING: [rule warning] DAC: no config file
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:39 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 23:05:39 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 13586 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:40 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:40 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:40 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:41 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:41 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:41 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 23:05:41 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, d6:75:fb:b8:78:3e
Oct 11 23:05:41 IQ138000 NetworkManager[404]: <info>  [1760223941.4846] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 23:05:41 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 23:05:41 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 23:05:41 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 23:05:41 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 23:05:41 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 23:05:41 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 23:05:41 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 23:05:41 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 23:05:41 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 23:05:41 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 23:05:41 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:41 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 23:05:41 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:05:41 IQ138000 systemd-udevd[4977]: Using default interface naming scheme 'v247'.
Oct 11 23:05:41 IQ138000 systemd-udevd[4977]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:41 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:41 IQ138000 knxd[4992]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:05:41 IQ138000 knxd[4992]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:05:41 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:05:41 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:41 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:05:41 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 23:05:41 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:05:42 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:42 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:42 IQ138000 wpa_supplicant[374]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:05:42 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:43 IQ138000 wb-rules[4620]: INFO: all rule files are loaded
Oct 11 23:05:43 IQ138000 python3[1970]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 23:05:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:05:43 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:43 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:05:43 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:05:43 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:05:43 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:05:44 IQ138000 wb-gsm[5041]: mm_on: Waiting for modem to start
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:44 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:44 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:44 IQ138000 npm[3578]: [2025-10-11 23:05:44] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 npm[3578]: [2025-10-11 23:05:45] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 23:05:45 IQ138000 npm[3578]: [2025-10-11 23:05:45] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:05:45 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:45 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 npm[3578]: [2025-10-11 23:05:46] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 23:05:46 IQ138000 npm[3578]: [2025-10-11 23:05:46] info:         zh:zstack:znp: Serialport opened
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:05:46 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:47 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:47 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:48 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:48 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: Currently 4 devices are joined.
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m: Connected to MQTT server
Oct 11 23:05:49 IQ138000 npm[3578]: [2025-10-11 23:05:49] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:05:49 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-12 02:05:49.905+00:00
Oct 11 23:05:49 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 23:05:49 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-12T02:05:49.905Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:49 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224129925,"cmd_timestamp_ms":1760223949925,"source":"schedule"}
Oct 11 23:05:49 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224129925,"cmd_timestamp_ms":1760223949925,"source":"schedule"}
Oct 11 23:05:49 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:05:50 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:05:50 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-12 02:05:50.163+00:00
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-12T02:05:50.163Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224130193,"cmd_timestamp_ms":1760223950193,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224130193,"cmd_timestamp_ms":1760223950193,"source":"schedule"}
Oct 11 23:05:50 IQ138000 npm[3578]: [2025-10-11 23:05:50] info:         z2m: Started frontend on port 8282
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 npm[3578]: [2025-10-11 23:05:50] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.74,"last_seen":1760219262060,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 23:05:50 IQ138000 npm[3578]: [2025-10-11 23:05:50] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":55.11,"last_seen":1760218940768,"power_outage_count":48745,"temperature":24.36,"voltage":3025}'
Oct 11 23:05:50 IQ138000 npm[3578]: [2025-10-11 23:05:50] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 23:05:50 IQ138000 npm[3578]: [2025-10-11 23:05:50] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":47.86,"last_seen":1760219055025,"power_outage_count":25795,"pressure":990.8,"temperature":21.17,"voltage":3005}'
Oct 11 23:05:50 IQ138000 npm[3578]: [2025-10-11 23:05:50] info:         z2m: Zigbee2MQTT started!
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-12 02:05:50.514+00:00
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-12T02:05:50.514Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130531,"cmd_timestamp_ms":1760223950531,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130531,"cmd_timestamp_ms":1760223950531,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-12 02:05:50.543+00:00
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-12T02:05:50.543Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130554,"cmd_timestamp_ms":1760223950554,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130554,"cmd_timestamp_ms":1760223950554,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-12 02:05:50.588+00:00
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-12T02:05:50.588Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130605,"cmd_timestamp_ms":1760223950605,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130605,"cmd_timestamp_ms":1760223950605,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-12 02:05:50.713+00:00
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-12T02:05:50.713Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130726,"cmd_timestamp_ms":1760223950726,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224130726,"cmd_timestamp_ms":1760223950726,"source":"schedule"}
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 23:05:50 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-12 02:05:50.984+00:00
Oct 11 23:05:50 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-12T02:05:50.984Z","to":"2025-10-12T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":1,"i":0}}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224131028,"cmd_timestamp_ms":1760223951028,"source":"schedule"}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224131028,"cmd_timestamp_ms":1760223951028,"source":"schedule"}
Oct 11 23:05:51 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-12 02:05:51.202+00:00
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-12T02:05:51.202Z","to":"2025-10-12T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":1,"i":0}}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224131222,"cmd_timestamp_ms":1760223951222,"source":"schedule"}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224131222,"cmd_timestamp_ms":1760223951222,"source":"schedule"}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 23:05:51 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 23:05:51 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 23:05:51 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:05:51 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:05:51 IQ138000 knxd[5201]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:05:51 IQ138000 knxd[5201]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:05:51 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:05:51 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:05:51 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-12 02:05:51.951+00:00
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-12T02:05:51.951Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224131963,"cmd_timestamp_ms":1760223951963,"source":"schedule"}
Oct 11 23:05:51 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224131963,"cmd_timestamp_ms":1760223951963,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 23:05:52 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:05:52 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:05:52 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:05:52 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-12 02:05:52.129+00:00
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-12T02:05:52.129Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224132146,"cmd_timestamp_ms":1760223952146,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224132146,"cmd_timestamp_ms":1760223952146,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-12 02:05:52.300+00:00
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-12T02:05:52.300Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224132311,"cmd_timestamp_ms":1760223952311,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224132311,"cmd_timestamp_ms":1760223952311,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-12 02:05:52.438+00:00
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-12T02:05:52.438Z","to":"2025-10-12T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224132452,"cmd_timestamp_ms":1760223952452,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224132452,"cmd_timestamp_ms":1760223952452,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-12 02:05:52.584+00:00
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-12T02:05:52.584Z","to":"2025-10-12T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224132595,"cmd_timestamp_ms":1760223952595,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224132595,"cmd_timestamp_ms":1760223952595,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-12 02:05:52.715+00:00
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-12T02:05:52.715Z","to":"2025-10-12T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224132726,"cmd_timestamp_ms":1760223952726,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224132726,"cmd_timestamp_ms":1760223952726,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-12 02:05:52.905+00:00
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-12T02:05:52.905Z","to":"2025-10-12T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224132917,"cmd_timestamp_ms":1760223952917,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224132917,"cmd_timestamp_ms":1760223952917,"source":"schedule"}
Oct 11 23:05:52 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 23:05:53 IQ138000 wb-watchdog[5249]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 23:05:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 23:05:53 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 23:05:53 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 23:05:53 IQ138000 wb-rules[4620]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 23:05:54 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:54 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:05:54 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:05:54 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 23:05:54 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:05:54 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 23:05:55 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:55 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:56 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:05:56 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:57 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid crc
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:58 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:58 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:05:59 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 wb-mqtt-serial[1669]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:06:00 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:06:01 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:01 IQ138000 ModemManager[472]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 23:06:01 IQ138000 ModemManager[472]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 23:06:01 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:06:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:02 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 23:06:02 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:06:02 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:06:02 IQ138000 ModemManager[472]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 23:06:02 IQ138000 knxd[5388]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:06:02 IQ138000 knxd[5388]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:06:02 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:06:02 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:06:02 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:06:02 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 23:06:02 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:02 IQ138000 python3[1970]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:06:02 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 23:06:03 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 23:06:03 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 23:06:03 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 23:06:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:03 IQ138000 ModemManager[472]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 23:06:03 IQ138000 ModemManager[472]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.8503] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.8541] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.8612] device (ttyUSB1): modem state 'enabling'
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.8721] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.8900] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 23:06:03 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:06:03 IQ138000 python3[1970]:    --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:06:03 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:06:03 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 23:06:03 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:06:03 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 23:06:03 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 23:06:03 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 23:06:03 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 23:06:03 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 23:06:03 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 23:06:03 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:06:03 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:06:03 IQ138000 python3[1970]:            |                state: disabled
Oct 11 23:06:03 IQ138000 python3[1970]:            |          power state: on
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:06:03 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:06:03 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:03 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:03 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:06:03 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 23:06:03 IQ138000 python3[1970]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.9026] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 23:06:03 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.9043] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:03 IQ138000 NetworkManager[404]: <info>  [1760223963.9235] manager: NetworkManager state is now CONNECTING
Oct 11 23:06:03 IQ138000 ModemManager[472]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-nm-helper[2043]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 23:06:04 IQ138000 python3[1970]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 23:06:04 IQ138000 python3[1970]:  successfully requested primary SIM switch in modem
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:04 IQ138000 ModemManager[472]: <info>  [modem0] power state updated: on
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:04 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 wb-rules[4620]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:06:05 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 23:06:05 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 lsyncd[5435]: 23:06:05 Normal: --- Startup ---
Oct 11 23:06:05 IQ138000 lsyncd[5435]: 23:06:05 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:06:05 IQ138000 lsyncd[5435]: messages
Oct 11 23:06:05 IQ138000 lsyncd[5435]: journal
Oct 11 23:06:05 IQ138000 lsyncd[5435]: iq_network_manager/iq_network_manager.log
Oct 11 23:06:05 IQ138000 lsyncd[5437]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:06:05 IQ138000 lsyncd[5436]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:06:05 IQ138000 lsyncd[5436]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 lsyncd[5435]: 23:06:05 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:06:05 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:06:05 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:05 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:06:06 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:06 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 23:06:07 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 23:06:07 IQ138000 wb-rules[4620]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 23:06:07 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 6 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:07 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:06:07 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:07 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:07 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 23:06:07 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:07 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] simple connect started...
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (6/10): register
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 23:06:08 IQ138000 NetworkManager[404]: <info>  [1760223968.4029] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:08 IQ138000 NetworkManager[404]: <info>  [1760223968.4042] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:08 IQ138000 NetworkManager[404]: <info>  [1760223968.4083] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 23:06:08 IQ138000 NetworkManager[404]: <info>  [1760223968.4109] ppp-manager: starting PPP connection
Oct 11 23:06:08 IQ138000 NetworkManager[404]: <info>  [1760223968.4241] ppp-manager: pppd started with pid 5456
Oct 11 23:06:08 IQ138000 pppd[5456]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 23:06:08 IQ138000 NetworkManager[5456]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: initializing
Oct 11 23:06:08 IQ138000 pppd[5456]: pppd 2.4.9 started by root, uid 0
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 23:06:08 IQ138000 pppd[5456]: Using interface ppp0
Oct 11 23:06:08 IQ138000 NetworkManager[5456]: Using interface ppp0
Oct 11 23:06:08 IQ138000 NetworkManager[5456]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 23:06:08 IQ138000 pppd[5456]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 23:06:08 IQ138000 NetworkManager[404]: <info>  [1760223968.4966] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 23:06:08 IQ138000 pppd[5456]: PAP authentication succeeded
Oct 11 23:06:08 IQ138000 pppd[5456]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 23:06:08 IQ138000 NetworkManager[5456]: PAP authentication succeeded
Oct 11 23:06:08 IQ138000 NetworkManager[5456]: kernel does not support PPP filtering
Oct 11 23:06:08 IQ138000 pppd[5456]: kernel does not support PPP filtering
Oct 11 23:06:08 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:08 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:08 IQ138000 ModemManager[472]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:08 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 pppd[5456]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 23:06:09 IQ138000 NetworkManager[5456]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 pppd[5456]: local  IP address 10.134.210.201
Oct 11 23:06:09 IQ138000 NetworkManager[5456]: local  IP address 10.134.210.201
Oct 11 23:06:09 IQ138000 NetworkManager[5456]: remote IP address 10.64.64.64
Oct 11 23:06:09 IQ138000 NetworkManager[5456]: primary   DNS address 172.23.10.131
Oct 11 23:06:09 IQ138000 NetworkManager[5456]: secondary DNS address 172.23.10.130
Oct 11 23:06:09 IQ138000 pppd[5456]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 23:06:09 IQ138000 pppd[5456]: remote IP address 10.64.64.64
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.1101] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:06:09 IQ138000 pppd[5456]: primary   DNS address 172.23.10.131
Oct 11 23:06:09 IQ138000 pppd[5456]: secondary DNS address 172.23.10.130
Oct 11 23:06:09 IQ138000 pppd[5456]: nm-ppp-plugin: ip-up event
Oct 11 23:06:09 IQ138000 pppd[5456]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.1190] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.1216] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.1240] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.1286] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 23:06:09 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:06:09 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.1754] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:06:09 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:06:09 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:06:09 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.2762] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.2774] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.2798] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.2840] device (ttyUSB1): Activation: successful, device activated.
Oct 11 23:06:09 IQ138000 NetworkManager[404]: <info>  [1760223969.2876] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:09 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 vnstatd[1660]: Info: Interface "ppp0" enabled.
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 ntpd[1658]: Listen normally on 4 ppp0 10.134.210.201:123
Oct 11 23:06:10 IQ138000 ntpd[1658]: new interface(s) found: waking up resolver
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:06:10 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:06:11 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:06:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:12 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 23:06:12 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:06:12 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:06:12 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:06:12 IQ138000 wb-mqtt-knx[2018]: INFO: knxd connected successfully
Oct 11 23:06:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:06:12 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:06:13 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:06:14 IQ138000 python3[1970]: Выполнение: mmcli -i any
Oct 11 23:06:14 IQ138000 python3[1970]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 23:06:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 23:06:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 23:06:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 23:06:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 23:06:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 23:06:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 23:06:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:06:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:06:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:06:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 23:06:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:06:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 23:06:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 23:06:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 23:06:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 23:06:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 23:06:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 23:06:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:06:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:06:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 23:06:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 23:06:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 23:06:14 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:06:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 23:06:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 23:06:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 23:06:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 23:06:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:06:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:06:14 IQ138000 python3[1970]: Current state: home
Oct 11 23:06:14 IQ138000 python3[1970]: SIM registered in the network.
Oct 11 23:06:14 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 23:06:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:14 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:06:14 IQ138000 python3[1970]:    --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:06:14 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:06:14 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 23:06:14 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:06:14 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 23:06:14 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 23:06:14 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 23:06:14 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 23:06:14 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 23:06:14 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 23:06:14 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:06:14 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:06:14 IQ138000 python3[1970]:            |                state: connected
Oct 11 23:06:14 IQ138000 python3[1970]:            |          power state: on
Oct 11 23:06:14 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 23:06:14 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:06:14 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 23:06:14 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 23:06:14 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 23:06:14 IQ138000 python3[1970]:            |         registration: home
Oct 11 23:06:14 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:14 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:06:14 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 23:06:14 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:06:14 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:14 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:06:14 IQ138000 python3[1970]:    -------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:14 IQ138000 python3[1970]:   -------------------------------
Oct 11 23:06:14 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 23:06:14 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 23:06:14 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 23:06:14 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 23:06:14 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 23:06:14 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:06:15 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:06:15 IQ138000 wb-mqtt-serial[1669]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:06:15 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:06:15 IQ138000 wb-mqtt-serial[1669]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:06:15 IQ138000 wb-mqtt-serial[1669]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:06:15 IQ138000 ntpd[1658]: Soliciting pool server 93.183.81.175
Oct 11 23:06:16 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 input(s) @ 8437 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:06:16 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:06:16 IQ138000 ntpd[1658]: Soliciting pool server 83.243.68.157
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:17 IQ138000 ntpd[1658]: Soliciting pool server 151.0.2.54
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:17 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 ntpd[1658]: Soliciting pool server 195.218.227.230
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:18 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:06:19 IQ138000 python3[1970]:    --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:06:19 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:06:19 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 23:06:19 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:06:19 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 23:06:19 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 23:06:19 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 23:06:19 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 23:06:19 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 23:06:19 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 23:06:19 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:06:19 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:06:19 IQ138000 python3[1970]:            |                state: connected
Oct 11 23:06:19 IQ138000 python3[1970]:            |          power state: on
Oct 11 23:06:19 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 23:06:19 IQ138000 python3[1970]:            |       signal quality: 90% (recent)
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:06:19 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 23:06:19 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 23:06:19 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 23:06:19 IQ138000 python3[1970]:            |         registration: home
Oct 11 23:06:19 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:19 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:06:19 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 23:06:19 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:06:19 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:06:19 IQ138000 python3[1970]:    -------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:19 IQ138000 python3[1970]:   -------------------------------
Oct 11 23:06:19 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 23:06:19 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 23:06:19 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 23:06:19 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 23:06:19 IQ138000 python3[1970]:              |     operator name: Beeline
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:06:19 IQ138000 wb-mqtt-serial[1669]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:06:20 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:06:20 IQ138000 ntpd[1658]: Soliciting pool server 93.95.100.85
Oct 11 23:06:21 IQ138000 ntpd[1658]: Soliciting pool server 94.141.164.123
Oct 11 23:06:22 IQ138000 ntpd[1658]: Soliciting pool server 195.122.253.38
Oct 11 23:06:24 IQ138000 python3[1970]: Выполнение: mmcli -m wbc
Oct 11 23:06:24 IQ138000 python3[1970]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:06:24 IQ138000 python3[1970]:    --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:06:24 IQ138000 python3[1970]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:06:24 IQ138000 python3[1970]:            |                model: A7602E-H
Oct 11 23:06:24 IQ138000 python3[1970]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:06:24 IQ138000 python3[1970]:            |            supported: gsm-umts
Oct 11 23:06:24 IQ138000 python3[1970]:            |              current: gsm-umts
Oct 11 23:06:24 IQ138000 python3[1970]:            |         equipment id: 860803062234204
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   System   |               device: wbc
Oct 11 23:06:24 IQ138000 python3[1970]:            |              drivers: option, rndis_host
Oct 11 23:06:24 IQ138000 python3[1970]:            |               plugin: simtech
Oct 11 23:06:24 IQ138000 python3[1970]:            |         primary port: ttyUSB1
Oct 11 23:06:24 IQ138000 python3[1970]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:06:24 IQ138000 python3[1970]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:06:24 IQ138000 python3[1970]:            |                state: connected
Oct 11 23:06:24 IQ138000 python3[1970]:            |          power state: on
Oct 11 23:06:24 IQ138000 python3[1970]:            |          access tech: lte
Oct 11 23:06:24 IQ138000 python3[1970]:            |       signal quality: 96% (recent)
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:06:24 IQ138000 python3[1970]:            |              current: allowed: any; preferred: none
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   3GPP     |                 imei: 860803062234204
Oct 11 23:06:24 IQ138000 python3[1970]:            |          operator id: 25099
Oct 11 23:06:24 IQ138000 python3[1970]:            |        operator name: beeline
Oct 11 23:06:24 IQ138000 python3[1970]:            |         registration: home
Oct 11 23:06:24 IQ138000 python3[1970]:            | packet service state: attached
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:24 IQ138000 python3[1970]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:06:24 IQ138000 python3[1970]:            |                       slot 2: none
Oct 11 23:06:24 IQ138000 python3[1970]:   --------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:06:24 IQ138000 python3[1970]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:24 IQ138000 python3[1970]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:06:24 IQ138000 python3[1970]:    -------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:06:24 IQ138000 python3[1970]:   -------------------------------
Oct 11 23:06:24 IQ138000 python3[1970]:   Properties |            active: yes
Oct 11 23:06:24 IQ138000 python3[1970]:              |              imsi: 250997340491874
Oct 11 23:06:24 IQ138000 python3[1970]:              |             iccid: 8970199210429593744
Oct 11 23:06:24 IQ138000 python3[1970]:              |       operator id: 25099
Oct 11 23:06:24 IQ138000 python3[1970]:              |     operator name: Beeline
-- Boot e4bd673768034d7e964a881e81fa2e78 --
Oct 11 23:14:11 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:14:11 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:14:11 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:14:11 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:14:11 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:14:11 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:14:11 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:14:11 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:14:11 IQ138000 kernel: Zone ranges:
Oct 11 23:14:11 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:14:11 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:14:11 IQ138000 kernel: Movable zone start for each node
Oct 11 23:14:11 IQ138000 kernel: Early memory node ranges
Oct 11 23:14:11 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:14:11 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:14:11 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:14:11 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:14:11 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:14:11 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:14:11 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:14:11 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:14:11 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:14:11 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:14:11 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:14:11 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:14:11 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:14:11 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:14:11 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:14:11 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:14:11 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:14:11 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:14:11 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:14:11 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:14:11 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:14:11 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:14:11 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:14:11 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:14:11 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:14:11 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:14:11 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:14:11 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:14:11 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:14:11 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:14:11 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:14:11 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:14:11 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:14:11 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:14:11 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:14:11 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:14:11 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:14:11 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:14:11 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:14:11 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:14:11 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:14:11 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:14:11 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:14:11 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:14:11 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:14:11 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:14:11 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:14:11 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:14:11 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:14:11 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:14:11 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:14:11 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:14:11 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:14:11 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:14:11 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:14:11 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:14:11 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:14:11 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:14:11 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:14:11 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:14:11 IQ138000 kernel: No ATAGs?
Oct 11 23:14:11 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:14:11 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:14:11 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:14:11 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:14:11 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:14:11 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:14:11 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:14:11 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:14:11 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:14:11 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:14:11 IQ138000 kernel: PTP clock support registered
Oct 11 23:14:11 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:14:11 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:14:11 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:14:11 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:14:11 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:14:11 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:14:11 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:14:11 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:14:11 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:14:11 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:14:11 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:14:11 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:14:11 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:14:11 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:14:11 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:14:11 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:14:11 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:14:11 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:14:11 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:14:11 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:14:11 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:14:11 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:14:11 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:14:11 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:14:11 IQ138000 kernel: brd: module loaded
Oct 11 23:14:11 IQ138000 kernel: loop: module loaded
Oct 11 23:14:11 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:14:11 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:14:11 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:14:11 IQ138000 kernel: CAN device driver interface
Oct 11 23:14:11 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:14:11 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:14:11 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:14:11 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:14:11 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:14:11 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:14:11 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:14:11 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:14:11 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:14:11 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:14:11 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:14:11 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:14:11 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:14:11 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:14:11 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:14:11 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:14:11 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:14:11 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:14:11 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:14:11 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:14:11 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:14:11 IQ138000 kernel: can: controller area network core
Oct 11 23:14:11 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:14:11 IQ138000 kernel: can: raw protocol
Oct 11 23:14:11 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:14:11 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:14:11 IQ138000 kernel: can: SAE J1939
Oct 11 23:14:11 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:14:11 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:14:11 IQ138000 kernel: registered taskstats version 1
Oct 11 23:14:11 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:14:11 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:14:11 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:14:11 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:14:11 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:14:11 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:14:11 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:14:11 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:14:11 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:14:07 UTC (1760224447)
Oct 11 23:14:11 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:14:11 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:14:11 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:14:11 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:14:11 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:14:11 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:14:11 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:14:11 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:14:11 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:14:11 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:14:11 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:14:11 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:14:11 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:14:11 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:14:11 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: random: fast init done
Oct 11 23:14:11 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:14:11 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:14:11 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:14:11 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:14:11 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:14:11 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:14:11 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:14:11 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:14:11 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:14:11 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:14:11 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:14:11 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:14:11 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:14:11 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:14:11 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:14:11 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:14:11 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:14:11 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:14:11 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:14:11 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:14:11 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:14:11 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:14:11 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:14:11 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:14:11 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:14:11 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:14:11 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:14:11 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:14:11 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:14:11 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:14:11 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:14:11 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:14:11 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:14:11 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:14:11 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:14:11 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:14:11 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:14:11 IQ138000 kernel: of_cfs_init
Oct 11 23:14:11 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:14:11 IQ138000 kernel: ALSA device list:
Oct 11 23:14:11 IQ138000 kernel:   No soundcards found.
Oct 11 23:14:11 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:14:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:14:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:14:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:14:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:14:11 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:14:11 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:14:11 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:14:11 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:14:11 IQ138000 kernel:   with arguments:
Oct 11 23:14:11 IQ138000 kernel:     /sbin/init
Oct 11 23:14:11 IQ138000 kernel:   with environment:
Oct 11 23:14:11 IQ138000 kernel:     HOME=/
Oct 11 23:14:11 IQ138000 kernel:     TERM=linux
Oct 11 23:14:11 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:14:11 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:14:11 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:14:11 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:14:11 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:14:11 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:14:11 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:14:11 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:14:11 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:14:11 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:14:11 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:14:11 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:14:11 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:14:11 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:14:11 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:14:11 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:14:11 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:14:11 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:14:11 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:14:11 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:14:11 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:14:11 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:14:11 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:14:11 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:14:11 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:14:11 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:14:11 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:14:11 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:14:11 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:14:11 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:14:11 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:14:11 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:14:11 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:14:11 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:14:11 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:14:11 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:14:11 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:14:11 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:14:11 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:14:11 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:14:11 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:14:11 IQ138000 systemd-journald[140]: Journal started
Oct 11 23:14:11 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:14:11 IQ138000 systemd-fsck[144]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
Oct 11 23:14:11 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:14:11 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:14:11 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:14:11 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:14:11 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:14:11 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:14:11 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:14:11 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:14:12 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:14:12 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:14:12 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:14:12 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:14:12 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:14:12 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:14:12 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:14:12 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:14:12 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:14:12 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:14:12 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:14:12 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:14:12 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:14:12 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:14:12 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:14:12 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:14:13 IQ138000 systemd-udevd[167]: Using default interface naming scheme 'v247'.
Oct 11 23:14:13 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:14:13 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:14:13 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:14:13 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:14:13 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:14:13 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:14:13 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:14:13 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:14:13 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:14:13 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:14:13 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:14:13 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:14:13 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:14:13 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 23:14:13 IQ138000 systemd-udevd[164]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:14:13 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:14:13 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:14:13 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:14:13 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:14:13 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:14:13 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:14:13 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:14:14 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:14:14 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:14:14 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:14:14 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:14:14 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:14:14 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:14:14 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:14:14 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:14:14 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:14:14 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:14:14 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:14:14 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:14:14 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:14:14 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:14:14 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:14:14 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 11 23:14:14 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:14:14 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:14:14 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:14:14 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:14:14 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:14:14 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:14:14 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:14:14 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:14:14 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:14:14 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 23:14:14 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:14:14 IQ138000 systemd-fsck[214]: data: clean, 16462/328656 files, 373712/1313536 blocks
Oct 11 23:14:14 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:14:14 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:14:14 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:14:14 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:14:14 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:14:14 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:14:14 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:14:14 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:14:14 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:14:15 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.066ms for 460 entries.
Oct 11 23:14:15 IQ138000 systemd-journald[140]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 498.3M, max 496.6M, 0B free.
Oct 11 23:14:15 IQ138000 kernel: random: crng init done
Oct 11 23:14:15 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 23:14:15 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 23:14:15 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 23:14:15 IQ138000 wb-configs-early[220]: Checking symlinks to /mnt/data
Oct 11 23:14:15 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 23:14:15 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 23:14:15 IQ138000 wb-configs-early[220]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 23:14:15 IQ138000 wb-configs-early[220]: Setting ownership www-data to /mnt/data/uploads
Oct 11 23:14:15 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 23:14:15 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 23:14:16 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 23:14:16 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 23:14:16 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 23:14:16 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 23:14:16 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 23:14:16 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 23:14:16 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 23:14:16 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 23:14:16 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 23:14:16 IQ138000 systemd[1]: Reached target Timers.
Oct 11 23:14:16 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 23:14:16 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 23:14:16 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 23:14:16 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 23:14:16 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 23:14:16 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 23:14:16 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:14:16 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 23:14:16 IQ138000 cron[297]: (CRON) INFO (pidfile fd = 3)
Oct 11 23:14:16 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 23:14:16 IQ138000 cron[297]: (CRON) INFO (Running @reboot jobs)
Oct 11 23:14:16 IQ138000 bluetoothd[294]: Bluetooth daemon 5.55
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 23:14:16 IQ138000 bluetoothd[294]: Starting SDP server
Oct 11 23:14:16 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 23:14:16 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:14:16 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 23:14:16 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 23:14:16 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 23:14:16 IQ138000 dbus-daemon[298]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=294 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 23:14:16 IQ138000 bluetoothd[294]: Bluetooth management interface 1.18 initialized
Oct 11 23:14:16 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 23:14:16 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 23:14:16 IQ138000 bluetoothd[294]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 23:14:16 IQ138000 bluetoothd[294]: sap-server: Operation not permitted (1)
Oct 11 23:14:16 IQ138000 config-manager[295]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:14:16 IQ138000 config-manager[295]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 23:14:16 IQ138000 wb-watchdog[325]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 23:14:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:14:17 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:14:17 IQ138000 migrate.sh[327]: Error: No such file or directory
Oct 11 23:14:17 IQ138000 rules-preprocessor[333]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:14:17 IQ138000 rules-preprocessor[333]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:14:17 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 23:14:17 IQ138000 migrate.sh[340]: Error: No such file or directory
Oct 11 23:14:17 IQ138000 reverse-ssh.sh[347]: Error: No such file or directory
Oct 11 23:14:17 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:14:17 IQ138000 polkitd[324]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 23:14:17 IQ138000 systemd[1]: Started watch config files.
Oct 11 23:14:17 IQ138000 migrate.sh[353]: Error: No such file or directory
Oct 11 23:14:17 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 23:14:17 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 23:14:17 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 23:14:17 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 23:14:17 IQ138000 migrate.sh[367]: Error: No such file or directory
Oct 11 23:14:17 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 23:14:17 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Successfully dropped root privileges.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: avahi-daemon 0.8 starting up.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Successfully called chroot().
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Successfully dropped remaining capabilities.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: No service file found in /etc/avahi/services.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: New relevant interface lo.IPv6 for mDNS.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: New relevant interface lo.IPv4 for mDNS.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Network interface enumeration completed.
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Registering new address record for ::1 on lo.*.
Oct 11 23:14:17 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 23:14:17 IQ138000 avahi-daemon[369]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 23:14:17 IQ138000 wb-watch-configs[384]: Watched dirs: /etc /etc/network
Oct 11 23:14:17 IQ138000 migrate.sh[379]: Error: No such file or directory
Oct 11 23:14:17 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:14:17 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:14:17 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 23:14:17 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 23:14:17 IQ138000 wpa_supplicant[382]: Successfully initialized wpa_supplicant
Oct 11 23:14:17 IQ138000 systemd-logind[348]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 23:14:17 IQ138000 systemd-logind[348]: New seat seat0.
Oct 11 23:14:17 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 23:14:17 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 23:14:17 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:17 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 23:14:17 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 23:14:17 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 23:14:17 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:17 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:14:17 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:14:17 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:14:17 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 23:14:17 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 23:14:17 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:17 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:14:17 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 23:14:17 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 23:14:17 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 23:14:17 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:14:17 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:14:17 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 23:14:18 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 23:14:18 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 23:14:18 IQ138000 systemd[1]: Started User Login Management.
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.1789] NetworkManager (version 1.42.4) is starting... (boot:e4bd6737-6803-4d7e-964a-881e81fa2e78)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.1823] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 23:14:18 IQ138000 monit[318]: Starting daemon monitor: monit.
Oct 11 23:14:18 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 23:14:18 IQ138000 avahi-daemon[369]: Server startup complete. Host name is IQ138000.local. Local service cookie is 3373457859.
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.2026] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 23:14:18 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 23:14:18 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.2630] manager[0x6c6900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 23:14:18 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 23:14:18 IQ138000 systemd[1]: Started Network Manager.
Oct 11 23:14:18 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 23:14:18 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 23:14:18 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 23:14:18 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 23:14:18 IQ138000 ModemManager[478]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 23:14:18 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 23:14:18 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.8668] hostname: hostname: using hostnamed
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.8671] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.8706] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.8787] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.8813] manager[0x6c6900]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.8815] manager[0x6c6900]: rfkill: WWAN hardware radio set enabled
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9118] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9195] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9242] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 23:14:18 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9584] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9664] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9682] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9686] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9691] manager: Networking is enabled by state file
Oct 11 23:14:18 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9828] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9830] settings: Loaded settings plugin: keyfile (internal)
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9832] ifupdown: management mode: unmanaged
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9833] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 23:14:18 IQ138000 NetworkManager[404]: <info>  [1760224458.9835] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 23:14:18 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.0381] dhcp: init: Using DHCP client 'internal'
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.0403] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.0615] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.0689] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.0844] device (lo): Activation: starting connection 'lo' (c762655f-043d-4588-9ef2-e91c2fd02f08)
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.0958] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.1017] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:19 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:14:19 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.4638] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.4667] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.4754] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.4792] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 23:14:19 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 23:14:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 23:14:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 23:14:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 23:14:19 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.6973] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.7022] device (wlan0): driver supports Access Point (AP) mode
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.7075] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 23:14:19 IQ138000 NetworkManager[404]: <info>  [1760224459.7101] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.5256] device (wlan1): driver supports Access Point (AP) mode
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.5322] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.5359] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6040] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6064] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6094] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6195] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6622] modem-manager: ModemManager available
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6626] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6639] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 23:14:20 IQ138000 NetworkManager[404]: <info>  [1760224460.6678] device (lo): Activation: successful, device activated.
Oct 11 23:14:20 IQ138000 wpa_supplicant[382]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:14:20 IQ138000 wpa_supplicant[382]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0135] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0142] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0163] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0181] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0212] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0284] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0380] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0390] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0416] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0436] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0482] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:14:21 IQ138000 NetworkManager[404]: <info>  [1760224461.0545] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:21 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 23:14:21 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 23:14:21 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 23:14:24 IQ138000 init.sh[1319]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 23:14:24 IQ138000 init.sh[1334]: In file included from -:16:
Oct 11 23:14:24 IQ138000 init.sh[1334]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:24 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:14:24 IQ138000 init.sh[1319]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 23:14:24 IQ138000 init.sh[1319]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 23:14:25 IQ138000 init.sh[1394]: In file included from -:11:
Oct 11 23:14:25 IQ138000 init.sh[1394]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:25 IQ138000 init.sh[1319]: ...
Oct 11 23:14:25 IQ138000 init.sh[1409]: In file included from -:11:
Oct 11 23:14:25 IQ138000 init.sh[1409]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:25 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 23:14:25 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 23:14:25 IQ138000 init.sh[1319]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 23:14:25 IQ138000 init.sh[1428]: In file included from -:24:
Oct 11 23:14:25 IQ138000 init.sh[1428]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:25 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:14:26 IQ138000 init.sh[1319]: ...
Oct 11 23:14:26 IQ138000 init.sh[1444]: In file included from -:24:
Oct 11 23:14:26 IQ138000 init.sh[1444]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:26 IQ138000 init.sh[1319]: failsafe bias enabled
Oct 11 23:14:26 IQ138000 init.sh[1319]: terminators are enabled
Oct 11 23:14:26 IQ138000 init.sh[1319]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 23:14:26 IQ138000 init.sh[1466]: In file included from -:11:
Oct 11 23:14:26 IQ138000 init.sh[1466]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:26 IQ138000 init.sh[1319]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 23:14:26 IQ138000 init.sh[1489]: In file included from -:11:
Oct 11 23:14:26 IQ138000 init.sh[1489]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:14:26 IQ138000 init.sh[1319]: ...
Oct 11 23:14:26 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 23:14:26 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 23:14:27 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 23:14:27 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 23:14:27 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 23:14:27 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 23:14:27 IQ138000 systemd[1]: Reached target Network.
Oct 11 23:14:27 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 23:14:27 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 23:14:27 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:14:27 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:14:27 IQ138000 knxd[1604]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:14:27 IQ138000 knxd[1604]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:14:27 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 23:14:27 IQ138000 lsyncd[1613]: 23:14:27 Normal: --- Startup ---
Oct 11 23:14:27 IQ138000 lsyncd[1613]: 23:14:27 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:14:27 IQ138000 lsyncd[1613]: iq_network_manager/iq_network_manager.log
Oct 11 23:14:27 IQ138000 lsyncd[1613]: messages
Oct 11 23:14:27 IQ138000 lsyncd[1613]: journal
Oct 11 23:14:27 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 23:14:27 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:14:27 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 23:14:27 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 23:14:27 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 23:14:27 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 23:14:27 IQ138000 lsyncd[1631]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:14:27 IQ138000 lsyncd[1622]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:14:27 IQ138000 lsyncd[1622]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 23:14:27 IQ138000 lsyncd[1613]: 23:14:27 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:14:27 IQ138000 ntpd[1623]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 23:14:27 IQ138000 ntpd[1623]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 23:14:27 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 23:14:27 IQ138000 ntpd[1623]: ntp-4 is maintained by Network Time Foundation,
Oct 11 23:14:27 IQ138000 ntpd[1623]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 23:14:27 IQ138000 ntpd[1623]: corporation.  Support and training for ntp-4 are
Oct 11 23:14:27 IQ138000 ntpd[1623]: available at https://www.nwtime.org/support
Oct 11 23:14:27 IQ138000 persist_meter_data.sh[1642]: Error: No such file or directory
Oct 11 23:14:27 IQ138000 ntpd[1623]: ----------------------------------------------------
Oct 11 23:14:27 IQ138000 ntpd[1653]: proto: precision = 1.042 usec (-20)
Oct 11 23:14:27 IQ138000 ntpd[1653]: basedate set to 2020-09-11
Oct 11 23:14:27 IQ138000 ntpd[1653]: gps base set to 2020-09-13 (week 2123)
Oct 11 23:14:27 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 23:14:28 IQ138000 ntpd[1653]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 23:14:28 IQ138000 ntpd[1653]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 23:14:28 IQ138000 ntpd[1653]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 23:14:28 IQ138000 ntpd[1653]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 23:14:28 IQ138000 ntpd[1653]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 23:14:28 IQ138000 ntpd[1653]: Listen normally on 3 lo [::1]:123
Oct 11 23:14:28 IQ138000 ntpd[1653]: Listening on routing socket on fd #20 for interface updates
Oct 11 23:14:28 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 23:14:28 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 23:14:28 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 23:14:28 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:14:28 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:14:28 IQ138000 wb-knxd-config.sh[1516]: No /dev/ttyKNX found, disabling level2
Oct 11 23:14:28 IQ138000 wb-knxd-config.sh[1516]: Restart knxd
Oct 11 23:14:28 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 23:14:28 IQ138000 wb-mqtt-w1[1679]: MQTT broker localhost:1883
Oct 11 23:14:28 IQ138000 wb-mqtt-w1[1679]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:28 IQ138000 wb-mqtt-w1[1679]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:14:28 IQ138000 wb-mqtt-w1[1679]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 23:14:28 IQ138000 wb-mqtt-w1[1679]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 23:14:28 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:14:28 IQ138000 wb-connection-manager[1506]: Connection LegacyWiFi not found, skipping
Oct 11 23:14:28 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:14:28 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 23:14:28 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 23:14:28 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:14:28 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 23:14:28 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 23:14:28 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:28 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:14:28 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:14:28 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:14:28 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 23:14:28 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 23:14:28 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:28 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 23:14:28 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 23:14:28 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:14:28 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 23:14:28 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 23:14:28 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 23:14:28 IQ138000 wb-connection-manager[1506]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 23:14:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 23:14:28 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 23:14:28 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 23:14:28 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 23:14:28 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 23:14:28 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 23:14:28 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 23:14:28 IQ138000 ntpd[1653]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:14:29 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:29 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 23:14:29 IQ138000 sshd[1738]: Server listening on 0.0.0.0 port 22.
Oct 11 23:14:29 IQ138000 sshd[1738]: Server listening on :: port 22.
Oct 11 23:14:29 IQ138000 vnstatd[1655]: Info: vnStat daemon 2.6 started. (pid:1655 uid:110 gid:117 64-bit)
Oct 11 23:14:29 IQ138000 vnstatd[1655]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 23:14:29 IQ138000 vnstatd[1655]: Info: Interface "ppp0" disabled.
Oct 11 23:14:29 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 23:14:29 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 23:14:29 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:14:29 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:14:29 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 23:14:29 IQ138000 NetworkManager[404]: <error> [1760224469.3509] audit: failed to open auditd socket: Protocol not supported
Oct 11 23:14:29 IQ138000 NetworkManager[404]: <info>  [1760224469.3511] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1506 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 23:14:29 IQ138000 wb-connection-manager[1506]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 23:14:29 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 23:14:29 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 23:14:29 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 23:14:29 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 23:14:29 IQ138000 reverse-ssh.sh[1839]: Error: No such file or directory
Oct 11 23:14:29 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:29 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:14:29 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 23:14:29 IQ138000 wb-adjust-systime[1832]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 23:14:29 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 23:14:29 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:29 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:14:29 IQ138000 ntpd[1653]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:14:29 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0179] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0196] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1506 uid=0 result="success"
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0213] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0256] manager: NetworkManager state is now CONNECTING
Oct 11 23:14:30 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0389] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0445] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0531] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.0959] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1043] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:30 IQ138000 wb-adjust-systime[1832]: Drift file is valid (was recently edited)
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1154] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 23:14:30 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1233] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1249] Config: added 'scan_ssid' value '1'
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1263] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1278] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 23:14:30 IQ138000 NetworkManager[404]: <info>  [1760224470.1296] Config: added 'psk' value '<hidden>'
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Warning: Error resolving bridge address: Name or service not known.
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 23:14:30 IQ138000 mosquitto[1890]: 1760224470: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 23:14:30 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 23:14:30 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 23:14:30 IQ138000 knxd[1908]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:14:30 IQ138000 knxd[1908]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:14:30 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 23:14:30 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 23:14:30 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 23:14:30 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 23:14:30 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 23:14:30 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 23:14:30 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 23:14:30 IQ138000 wb-mqtt-db[1976]: MQTT broker localhost:1883
Oct 11 23:14:30 IQ138000 wb-mqtt-db[1976]: Config file /etc/wb-mqtt-db.conf
Oct 11 23:14:30 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 23:14:30 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:30 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:30 IQ138000 ntpd[1653]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:14:30 IQ138000 systemd[1]: Started metrics sender.
Oct 11 23:14:31 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 23:14:31 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] Creating tables if necessary
Oct 11 23:14:31 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] Create indices if necessary
Oct 11 23:14:31 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] Analyzing data table
Oct 11 23:14:31 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 23:14:31 IQ138000 wb-mqtt-logs[1999]: MQTT broker localhost:1883
Oct 11 23:14:31 IQ138000 wb-mqtt-logs[1999]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:31 IQ138000 wb-mqtt-logs[1999]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:31 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 23:14:31 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:14:31 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 23:14:31 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:31 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:14:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:14:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.532s CPU time.
Oct 11 23:14:31 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 23:14:31 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 23:14:31 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 23:14:31 IQ138000 wb-mqtt-knx[2082]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:31 IQ138000 wb-mqtt-knx[2082]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:31 IQ138000 ntpd[1653]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:14:32 IQ138000 wb-mqtt-confed[1967]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:14:32 IQ138000 wb-mqtt-confed[1967]: INFO: [wbgo_mqtt] confed-IQ138000-1967: MQTT connection established
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2026]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 23:14:32 IQ138000 wb-mqtt-iec104[1993]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 23:14:32 IQ138000 NetworkManager[404]: <info>  [1760224472.4715] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 23:14:32 IQ138000 NetworkManager[404]: <info>  [1760224472.4718] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 23:14:32 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 23:14:32 IQ138000 wb-mqtt-opcua[2158]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 23:14:32 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [gpio driver] Started
Oct 11 23:14:32 IQ138000 wb-mqtt-mbgate[2006]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 23:14:32 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:14:32 IQ138000 wb-mqtt-gpio[1872]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:14:33 IQ138000 wb-mqtt-iec104[2195]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 23:14:33 IQ138000 systemd[1]: nginx.service: Failed to parse PID from file /run/nginx.pid: Invalid argument
Oct 11 23:14:33 IQ138000 wb-mqtt-opcua[2158]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 23:14:33 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 23:14:33 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 23:14:33 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 23:14:33 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 23:14:33 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:33 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 23:14:33 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:14:33 IQ138000 wb-mqtt-logs[1999]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:33 IQ138000 wb-mqtt-logs[1999]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:33 IQ138000 wb-mqtt-logs[1999]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:33 IQ138000 wb-mqtt-logs[1999]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:14:34 IQ138000 wb-mqtt-iec104[2195]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 23:14:34 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 23:14:35 IQ138000 wb-mqtt-knx[2082]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:35 IQ138000 wb-mqtt-knx[2082]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:35 IQ138000 wb-mqtt-knx[2082]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:35 IQ138000 wb-mqtt-knx[2082]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:14:35 IQ138000 wb-mqtt-knx[2082]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 23:14:35 IQ138000 python3[1950]: No data file found at /tmp/network_status_cache.json
Oct 11 23:14:35 IQ138000 python3[1950]: Connecting to MQTT
Oct 11 23:14:35 IQ138000 python3[1950]: Connected to MQTT
Oct 11 23:14:35 IQ138000 python3[1950]: Connection returned result: Connection Accepted.
Oct 11 23:14:36 IQ138000 wpa_supplicant[382]: wlan0: Reject scan trigger since one is already pending
Oct 11 23:14:37 IQ138000 dbus-daemon[298]: [system] Connection :1.17 (uid=0 pid=2020 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:14:38 IQ138000 wb-device-manager[1957]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 23:14:38 IQ138000 wb-device-manager[1957]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New virtual device lo c762655f-043d-4588-9ef2-e91c2fd02f08 /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:14:38 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New active connection lo c762655f-043d-4588-9ef2-e91c2fd02f08 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 23:14:38 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:38 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:39 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 23:14:39 IQ138000 kernel: dc5ldo: disabling
Oct 11 23:14:39 IQ138000 kernel: dldo4: disabling
Oct 11 23:14:39 IQ138000 kernel: vdd-sd-power: disabling
Oct 11 23:14:39 IQ138000 kernel: vcc-sd: disabling
Oct 11 23:14:39 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:14:39 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:14:39 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:14:39 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 23:14:40 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: MQTT broker localhost:1883
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] ADC worker thread is started
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:14:40 IQ138000 wb-mqtt-adc[3119]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:14:41 IQ138000 wb-mqtt-confed[1967]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 23:14:41 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:41 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:14:41 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:14:41 IQ138000 knxd[3260]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:14:41 IQ138000 knxd[3260]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:14:41 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:14:41 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:41 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 23:14:41 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-gsm[3344]: main: Called from pid 1 (systemd)
Oct 11 23:14:42 IQ138000 wb-mqtt-db[1976]: INFO: [sqlite] DB initialization is done
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 23:14:42 IQ138000 wb-gsm[3385]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:14:42 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 23:14:42 IQ138000 wb-usb-otg-start.sh[3438]: : wb-usb-otg-start
Oct 11 23:14:42 IQ138000 wb-usb-otg-start.sh[3438]: main: setup_device()
Oct 11 23:14:42 IQ138000 wb-gsm[3451]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:14:42 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 23:14:42 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:14:42 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:14:43 IQ138000 kernel: using random self ethernet address
Oct 11 23:14:43 IQ138000 kernel: using random host ethernet address
Oct 11 23:14:43 IQ138000 wb-usb-otg-start.sh[3438]: main: enabling profile rndis
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 23:14:43 IQ138000 systemd-udevd[3419]: Using default interface naming scheme 'v247'.
Oct 11 23:14:43 IQ138000 NetworkManager[404]: <info>  [1760224483.1803] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 23:14:43 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 23:14:43 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 23:14:43 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 23:14:43 IQ138000 NetworkManager[404]: <info>  [1760224483.3498] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 23:14:43 IQ138000 wb-gsm[3504]: should_enable: Should enable GSM modem
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 23:14:43 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 23:14:43 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 23:14:44 IQ138000 wb-gsm[3576]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 23:14:44 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 23:14:44 IQ138000 wb-gsm[3588]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 23:14:44 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 23:14:45 IQ138000 wb-gsm[3611]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:14:45 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 23:14:45 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: DB logger started, go to main loop
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 23:14:45 IQ138000 ModemManager[478]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 23:14:45 IQ138000 python3[1950]: Выполнение: service wb-connection-manager stop
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 23:14:45 IQ138000 wb-mqtt-db[1976]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 23:14:45 IQ138000 npm[1689]: > zigbee2mqtt@2.1.1 start
Oct 11 23:14:45 IQ138000 npm[1689]: > node index.js
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 23:14:46 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 8 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:47 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 npm[3688]: Starting Zigbee2MQTT without watchdog.
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 23:14:48 IQ138000 wb-gsm[3999]: mm_off: Modem is already OFF
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:14:48 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:14:49 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:49 IQ138000 wb-gsm[4069]: main: Called from pid 3506 (wb-gsm-mm)
Oct 11 23:14:49 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:49 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:14:49 IQ138000 wb-gsm[4080]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:14:49 IQ138000 wb-gsm[4103]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:14:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:14:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:50 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:51 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:14:52 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:53 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 23:14:53 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:14:53 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:53 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:53 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:53 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:53 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:53 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 23:14:53 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:53 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:14:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:14:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:14:53 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 23:14:53 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:14:53 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:14:53 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:14:53 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:14:53 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:14:53 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:14:53 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:14:53 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 23:14:53 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 23:14:53 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:14:53 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:14:54 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: MQTT broker localhost:1883
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:14:54 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 23:14:54 IQ138000 knxd[4502]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:14:54 IQ138000 knxd[4502]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:14:54 IQ138000 python3[1950]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 23:14:54 IQ138000 python3[1950]:  
Oct 11 23:14:54 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 23:14:54 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.164s CPU time.
Oct 11 23:14:54 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:14:54 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:14:54 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: w1 thread Started
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:14:54 IQ138000 wb-mqtt-w1[4508]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:14:54 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <warn>  [1760224495.5275] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <info>  [1760224495.5277] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <info>  [1760224495.5297] manager: NetworkManager state is now DISCONNECTED
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <warn>  [1760224495.5315] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <info>  [1760224495.5329] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:14:55 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <info>  [1760224495.5759] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 23:14:55 IQ138000 NetworkManager[404]: <info>  [1760224495.5761] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:55 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:56 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:14:56 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:56 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:14:57 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:14:58 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 9984 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:14:58 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:14:58 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 23:14:59 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:14:59 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 23:14:59 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 23:14:59 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:14:59 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:14:59 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:14:59 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 23:14:59 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:14:59 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:14:59 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:14:59 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 23:14:59 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:14:59 IQ138000 NetworkManager[404]: <info>  [1760224499.1307] manager: startup complete
Oct 11 23:14:59 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:14:59 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 23:14:59 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 23:14:59 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:14:59 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:14:59 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 23:14:59 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 23:14:59 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: driver is created
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: driver loop is started
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: wait for driver to become ready
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: [wbgo_mqtt] rules-IQ138000-4561: MQTT connection established
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: driver is ready
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 11 23:14:59 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:14:59 IQ138000 wb-rules[4561]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4561: MQTT connection established
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:00 IQ138000 wb-rules[4561]: INFO: [engine] Starting sync loop
Oct 11 23:15:00 IQ138000 wb-rules[4561]: INFO: [engine] Starting main loop
Oct 11 23:15:00 IQ138000 wb-rules[4561]: INFO: the engine is ready
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 23:15:00 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:15:00 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:15:00 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 23:15:01 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 watchdog[4782]: starting daemon (5.16):
Oct 11 23:15:01 IQ138000 watchdog[4782]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 23:15:01 IQ138000 watchdog[4782]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 23:15:01 IQ138000 watchdog[4782]:  ping: no machine to check
Oct 11 23:15:01 IQ138000 watchdog[4782]:  file: no file to check
Oct 11 23:15:01 IQ138000 watchdog[4782]:  pidfile: /var/run/sshd.pid
Oct 11 23:15:01 IQ138000 watchdog[4782]:  interface: no interface to check
Oct 11 23:15:01 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 23:15:01 IQ138000 watchdog[4782]:  temperature: no sensors to check
Oct 11 23:15:01 IQ138000 watchdog[4782]:  no test binary files
Oct 11 23:15:01 IQ138000 watchdog[4782]:  no repair binary files
Oct 11 23:15:01 IQ138000 watchdog[4782]:  error retry time-out = 30 seconds
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 watchdog[4782]:  repair attempts = 1
Oct 11 23:15:01 IQ138000 watchdog[4782]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 23:15:01 IQ138000 watchdog[4782]: watchdog now set to 120 seconds
Oct 11 23:15:01 IQ138000 watchdog[4782]: hardware watchdog identity: WBEC WDT
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:01 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 23:15:01 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 systemd[1]: Startup finished in 3.810s (kernel) + 52.070s (userspace) = 55.881s.
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-rules[4561]: WARNING: [rule warning] DAC: no config file
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:15:01 IQ138000 CRON[4882]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 11 23:15:01 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:01 IQ138000 CRON[4908]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 11 23:15:02 IQ138000 CRON[4882]: pam_unix(cron:session): session closed for user root
Oct 11 23:15:02 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:02 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 23:15:02 IQ138000 kernel: usbcore: registered new interface driver option
Oct 11 23:15:02 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 11 23:15:02 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 7e:d6:60:d3:dd:09
Oct 11 23:15:02 IQ138000 NetworkManager[404]: <info>  [1760224502.8710] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 11 23:15:02 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 11 23:15:02 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 11 23:15:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 11 23:15:02 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 11 23:15:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 11 23:15:02 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 11 23:15:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 11 23:15:02 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 11 23:15:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:02 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:15:02 IQ138000 systemd-udevd[4971]: Using default interface naming scheme 'v247'.
Oct 11 23:15:03 IQ138000 systemd-udevd[4971]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:15:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:03 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:03 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:15:04 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 11 23:15:04 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:15:04 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:04 IQ138000 knxd[5011]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:15:04 IQ138000 knxd[5011]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:15:04 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:04 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:15:04 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:15:04 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:04 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:04 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 11 23:15:04 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:15:05 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:05 IQ138000 wb-rules[4561]: INFO: all rule files are loaded
Oct 11 23:15:05 IQ138000 wb-gsm[5031]: mm_on: Waiting for modem to start
Oct 11 23:15:05 IQ138000 python3[1950]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:15:05 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:15:06 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:06 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:06 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:06 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:15:06 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:06 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:06 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:07 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:07 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:08 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:08 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:15:08 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:09 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:09 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 11 23:15:10 IQ138000 npm[3688]: [2025-10-11 23:15:10] info:         z2m: Logging to console, file (filename: log.log)
Oct 11 23:15:10 IQ138000 npm[3688]: [2025-10-11 23:15:10] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 11 23:15:10 IQ138000 npm[3688]: [2025-10-11 23:15:10] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:10 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:10 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:11 IQ138000 npm[3688]: [2025-10-11 23:15:11] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 11 23:15:11 IQ138000 npm[3688]: [2025-10-11 23:15:11] info:         zh:zstack:znp: Serialport opened
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:11 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:15:11 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-12 02:15:12.027+00:00
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-12T02:15:12.027Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224692039,"cmd_timestamp_ms":1760224512039,"source":"schedule"}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224692039,"cmd_timestamp_ms":1760224512039,"source":"schedule"}
Oct 11 23:15:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-12 02:15:12.322+00:00
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 11 23:15:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-12T02:15:12.322Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":3}}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224692336,"cmd_timestamp_ms":1760224512336,"source":"schedule"}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760224692336,"cmd_timestamp_ms":1760224512336,"source":"schedule"}
Oct 11 23:15:12 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-12 02:15:12.563+00:00
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-12T02:15:12.563Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224692580,"cmd_timestamp_ms":1760224512580,"source":"schedule"}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224692580,"cmd_timestamp_ms":1760224512580,"source":"schedule"}
Oct 11 23:15:12 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-12 02:15:12.976+00:00
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-12T02:15:12.976Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224692991,"cmd_timestamp_ms":1760224512991,"source":"schedule"}
Oct 11 23:15:12 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224692991,"cmd_timestamp_ms":1760224512991,"source":"schedule"}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 11 23:15:13 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-12 02:15:13.381+00:00
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-12T02:15:13.381Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224693393,"cmd_timestamp_ms":1760224513393,"source":"schedule"}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224693393,"cmd_timestamp_ms":1760224513393,"source":"schedule"}
Oct 11 23:15:13 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:15:13 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:15:13 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-12 02:15:13.601+00:00
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-12T02:15:13.601Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224693617,"cmd_timestamp_ms":1760224513617,"source":"schedule"}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224693617,"cmd_timestamp_ms":1760224513617,"source":"schedule"}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-12 02:15:13.763+00:00
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-12T02:15:13.763Z","to":"2025-10-12T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":1,"i":0}}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224693777,"cmd_timestamp_ms":1760224513777,"source":"schedule"}
Oct 11 23:15:13 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224693777,"cmd_timestamp_ms":1760224513777,"source":"schedule"}
Oct 11 23:15:13 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-12 02:15:14.043+00:00
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-12T02:15:14.043Z","to":"2025-10-12T10:20:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":1,"i":0}}
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224694059,"cmd_timestamp_ms":1760224514059,"source":"schedule"}
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760224694059,"cmd_timestamp_ms":1760224514059,"source":"schedule"}
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-12 02:15:14.480+00:00
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 11 23:15:14 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 11 23:15:14 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-12T02:15:14.480Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224694497,"cmd_timestamp_ms":1760224514497,"source":"schedule"}
Oct 11 23:15:14 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224694497,"cmd_timestamp_ms":1760224514497,"source":"schedule"}
Oct 11 23:15:14 IQ138000 knxd[5193]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:15:14 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:14 IQ138000 knxd[5193]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:15:14 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:15:14 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-12 02:15:14.721+00:00
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-12T02:15:14.721Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224694735,"cmd_timestamp_ms":1760224514735,"source":"schedule"}
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224694735,"cmd_timestamp_ms":1760224514735,"source":"schedule"}
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: zigbee-herdsman started (resumed)
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:15:14 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: Currently 4 devices are joined.
Oct 11 23:15:14 IQ138000 npm[3688]: [2025-10-11 23:15:14] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-12 02:15:14.942+00:00
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-12T02:15:14.942Z","to":"2025-10-12T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":2}}
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224694954,"cmd_timestamp_ms":1760224514954,"source":"schedule"}
Oct 11 23:15:14 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760224694954,"cmd_timestamp_ms":1760224514954,"source":"schedule"}
Oct 11 23:15:14 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-12 02:15:15.126+00:00
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-12T02:15:15.126Z","to":"2025-10-12T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224695160,"cmd_timestamp_ms":1760224515160,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224695160,"cmd_timestamp_ms":1760224515160,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m: Connected to MQTT server
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-12 02:15:15.307+00:00
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-12T02:15:15.307Z","to":"2025-10-12T07:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":0}}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224695349,"cmd_timestamp_ms":1760224515349,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[1]],"ch_frequency":[["20"]]},"expiration_stamp_ms":1760224695349,"cmd_timestamp_ms":1760224515349,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-12 02:15:15.498+00:00
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-12T02:15:15.498Z","to":"2025-10-12T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224695519,"cmd_timestamp_ms":1760224515519,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224695519,"cmd_timestamp_ms":1760224515519,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:15:15 IQ138000 wb-rules[4561]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:15:15 IQ138000 wb-rules[4561]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-12 02:15:15.731+00:00
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-12T02:15:15.731Z","to":"2025-10-12T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224695754,"cmd_timestamp_ms":1760224515754,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760224695754,"cmd_timestamp_ms":1760224515754,"source":"schedule"}
Oct 11 23:15:15 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m: Started frontend on port 8282
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.74,"last_seen":1760219262060,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":55.11,"last_seen":1760218940768,"power_outage_count":48745,"temperature":24.36,"voltage":3025}'
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":47.86,"last_seen":1760219055025,"power_outage_count":25795,"pressure":990.8,"temperature":21.17,"voltage":3005}'
Oct 11 23:15:15 IQ138000 npm[3688]: [2025-10-11 23:15:15] info:         z2m: Zigbee2MQTT started!
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:15 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:15 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-watchdog[5257]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {1}[0]
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {20}[0]
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {20}[0]
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {1}[0]
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:193:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:204:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:16 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 11 23:15:16 IQ138000 wb-rules[4561]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 11 23:15:17 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:17 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:15:17 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 11 23:15:17 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:15:17 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 11 23:15:18 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 16 input(s) @ 12840 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:15:18 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:19 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:19 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:20 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 11 23:15:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:21 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 11 23:15:21 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:22 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:22 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:23 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:23 IQ138000 ModemManager[478]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 11 23:15:23 IQ138000 ModemManager[478]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 11 23:15:23 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:24 IQ138000 ModemManager[478]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 11 23:15:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:24 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:15:24 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 23:15:24 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:24 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 11 23:15:24 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:15:24 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:15:24 IQ138000 knxd[5395]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:15:24 IQ138000 knxd[5395]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:15:24 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:15:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:15:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:15:24 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 23:15:25 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 23:15:25 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 11 23:15:25 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 11 23:15:25 IQ138000 ModemManager[478]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 11 23:15:25 IQ138000 python3[1950]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:15:25 IQ138000 ModemManager[478]: <info>  [modem0] state changed (unknown -> disabled)
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7705] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7749] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7794] device (ttyUSB1): modem state 'enabling'
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7895] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7945] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7981] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.7989] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:25 IQ138000 NetworkManager[404]: <info>  [1760224525.8012] manager: NetworkManager state is now CONNECTING
Oct 11 23:15:25 IQ138000 ModemManager[478]: <info>  [modem0] state changed (disabled -> enabling)
Oct 11 23:15:25 IQ138000 wb-mqtt-nm-helper[2020]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 11 23:15:25 IQ138000 ModemManager[478]: <info>  [modem0] power state updated: on
Oct 11 23:15:26 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:15:26 IQ138000 python3[1950]:    --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:15:26 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:15:26 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 23:15:26 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:15:26 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 23:15:26 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 23:15:26 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 23:15:26 IQ138000 python3[1950]:            |              drivers: rndis_host, option
Oct 11 23:15:26 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 23:15:26 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 23:15:26 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:15:26 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:15:26 IQ138000 python3[1950]:            |                state: enabling
Oct 11 23:15:26 IQ138000 python3[1950]:            |          power state: on
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:15:26 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:15:26 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:26 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:26 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:15:26 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 23:15:26 IQ138000 python3[1950]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 11 23:15:26 IQ138000 python3[1950]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 11 23:15:26 IQ138000 python3[1950]:  successfully requested primary SIM switch in modem
Oct 11 23:15:27 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 11 23:15:27 IQ138000 wb-rules[4561]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 11 23:15:27 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:28 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:15:28 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:15:28 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 11 23:15:28 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:15:28 IQ138000 lsyncd[5443]: 23:15:28 Normal: --- Startup ---
Oct 11 23:15:28 IQ138000 lsyncd[5443]: 23:15:28 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:15:28 IQ138000 lsyncd[5443]: journal
Oct 11 23:15:28 IQ138000 lsyncd[5443]: iq_network_manager/iq_network_manager.log
Oct 11 23:15:28 IQ138000 lsyncd[5443]: messages
Oct 11 23:15:28 IQ138000 lsyncd[5445]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:15:28 IQ138000 lsyncd[5444]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:15:28 IQ138000 lsyncd[5444]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 11 23:15:28 IQ138000 lsyncd[5443]: 23:15:28 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:15:28 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:15:28 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:15:29 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 11 23:15:29 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 11 23:15:29 IQ138000 wb-rules[4561]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] state changed (enabling -> enabled)
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] state changed (enabled -> registered)
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] simple connect started...
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (6/10): register
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (8/10): bearer
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (9/10): connect
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] state changed (registered -> connecting)
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] state changed (connecting -> connected)
Oct 11 23:15:30 IQ138000 ModemManager[478]: <info>  [modem0] simple connect state (10/10): all done
Oct 11 23:15:30 IQ138000 NetworkManager[404]: <info>  [1760224530.6822] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:30 IQ138000 NetworkManager[404]: <info>  [1760224530.6835] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 11 23:15:30 IQ138000 NetworkManager[404]: <info>  [1760224530.6871] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 11 23:15:30 IQ138000 NetworkManager[404]: <info>  [1760224530.6893] ppp-manager: starting PPP connection
Oct 11 23:15:30 IQ138000 NetworkManager[404]: <info>  [1760224530.7029] ppp-manager: pppd started with pid 5463
Oct 11 23:15:30 IQ138000 pppd[5463]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 23:15:30 IQ138000 NetworkManager[5463]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: initializing
Oct 11 23:15:30 IQ138000 pppd[5463]: pppd 2.4.9 started by root, uid 0
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 11 23:15:30 IQ138000 NetworkManager[404]: <info>  [1760224530.7707] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 11 23:15:30 IQ138000 pppd[5463]: Using interface ppp0
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 11 23:15:30 IQ138000 NetworkManager[5463]: Using interface ppp0
Oct 11 23:15:30 IQ138000 NetworkManager[5463]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 23:15:30 IQ138000 pppd[5463]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: got credentials from NetworkManager
Oct 11 23:15:30 IQ138000 pppd[5463]: PAP authentication succeeded
Oct 11 23:15:30 IQ138000 NetworkManager[5463]: PAP authentication succeeded
Oct 11 23:15:30 IQ138000 pppd[5463]: nm-ppp-plugin: status 8 / phase 'network'
Oct 11 23:15:30 IQ138000 pppd[5463]: kernel does not support PPP filtering
Oct 11 23:15:30 IQ138000 NetworkManager[5463]: kernel does not support PPP filtering
Oct 11 23:15:30 IQ138000 kernel: PPP BSD Compression module registered
Oct 11 23:15:30 IQ138000 kernel: PPP Deflate Compression module registered
Oct 11 23:15:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:30 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:31 IQ138000 ModemManager[478]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 11 23:15:31 IQ138000 pppd[5463]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 23:15:31 IQ138000 NetworkManager[5463]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 11 23:15:31 IQ138000 pppd[5463]: local  IP address 10.231.176.21
Oct 11 23:15:31 IQ138000 NetworkManager[5463]: local  IP address 10.231.176.21
Oct 11 23:15:31 IQ138000 NetworkManager[5463]: remote IP address 10.64.64.64
Oct 11 23:15:31 IQ138000 NetworkManager[5463]: primary   DNS address 172.23.10.131
Oct 11 23:15:31 IQ138000 NetworkManager[5463]: secondary DNS address 172.23.10.130
Oct 11 23:15:31 IQ138000 pppd[5463]: nm-ppp-plugin: status 9 / phase 'running'
Oct 11 23:15:31 IQ138000 pppd[5463]: remote IP address 10.64.64.64
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.3337] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:15:31 IQ138000 pppd[5463]: primary   DNS address 172.23.10.131
Oct 11 23:15:31 IQ138000 pppd[5463]: secondary DNS address 172.23.10.130
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.3421] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.3445] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:31 IQ138000 pppd[5463]: nm-ppp-plugin: ip-up event
Oct 11 23:15:31 IQ138000 pppd[5463]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.3498] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.3537] ppp-manager: (IPv4 Config Get) reply received.
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.3561] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 11 23:15:31 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:15:31 IQ138000 dbus-daemon[298]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:15:31 IQ138000 dbus-daemon[298]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 11 23:15:31 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:15:31 IQ138000 dbus-daemon[298]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:15:31 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.4611] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.4626] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.4648] manager: NetworkManager state is now CONNECTED_SITE
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.4672] device (ttyUSB1): Activation: successful, device activated.
Oct 11 23:15:31 IQ138000 NetworkManager[404]: <info>  [1760224531.4704] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:31 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:15:32 IQ138000 ntpd[1653]: Listen normally on 4 ppp0 10.231.176.21:123
Oct 11 23:15:32 IQ138000 ntpd[1653]: new interface(s) found: waking up resolver
Oct 11 23:15:32 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 17694 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:33 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:34 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:34 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 11 23:15:34 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:15:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:35 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:15:35 IQ138000 wb-mqtt-knx[2082]: INFO: knxd connected successfully
Oct 11 23:15:35 IQ138000 vnstatd[1655]: Info: Interface "ppp0" enabled.
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:15:35 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:15:36 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:36 IQ138000 python3[1950]: Выполнение: mmcli -i any
Oct 11 23:15:36 IQ138000 python3[1950]: Команда "mmcli -i any" выполнена. Результат:
Oct 11 23:15:36 IQ138000 python3[1950]:    -------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:36 IQ138000 python3[1950]:   -------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 23:15:36 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 23:15:36 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 23:15:36 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 23:15:36 IQ138000 python3[1950]:              |     operator name: Beeline
Oct 11 23:15:36 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 23:15:36 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:15:36 IQ138000 python3[1950]:    --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:15:36 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:15:36 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 23:15:36 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:15:36 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 23:15:36 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 23:15:36 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 23:15:36 IQ138000 python3[1950]:            |              drivers: rndis_host, option
Oct 11 23:15:36 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 23:15:36 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 23:15:36 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:15:36 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:15:36 IQ138000 python3[1950]:            |                state: connected
Oct 11 23:15:36 IQ138000 python3[1950]:            |          power state: on
Oct 11 23:15:36 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 23:15:36 IQ138000 python3[1950]:            |       signal quality: 93% (recent)
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:15:36 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 23:15:36 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 23:15:36 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 23:15:36 IQ138000 python3[1950]:            |         registration: home
Oct 11 23:15:36 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:36 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:15:36 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:15:36 IQ138000 python3[1950]: Current state: home
Oct 11 23:15:36 IQ138000 python3[1950]: SIM registered in the network.
Oct 11 23:15:36 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 23:15:36 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:15:36 IQ138000 python3[1950]:    --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:15:36 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:15:36 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 23:15:36 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:15:36 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 23:15:36 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 23:15:36 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 23:15:36 IQ138000 python3[1950]:            |              drivers: rndis_host, option
Oct 11 23:15:36 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 23:15:36 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 23:15:36 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:15:36 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:15:36 IQ138000 python3[1950]:            |                state: connected
Oct 11 23:15:36 IQ138000 python3[1950]:            |          power state: on
Oct 11 23:15:36 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 23:15:36 IQ138000 python3[1950]:            |       signal quality: 93% (recent)
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:15:36 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 23:15:36 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 23:15:36 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 23:15:36 IQ138000 python3[1950]:            |         registration: home
Oct 11 23:15:36 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:15:36 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:36 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:36 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:15:37 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 23:15:37 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:37 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:15:37 IQ138000 python3[1950]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:37 IQ138000 python3[1950]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:15:37 IQ138000 python3[1950]:    -------------------------------
Oct 11 23:15:37 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:37 IQ138000 python3[1950]:   -------------------------------
Oct 11 23:15:37 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 23:15:37 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 23:15:37 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 23:15:37 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 23:15:37 IQ138000 python3[1950]:              |     operator name: Beeline
Oct 11 23:15:37 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:38 IQ138000 ntpd[1653]: Soliciting pool server 89.169.135.41
Oct 11 23:15:38 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:38 IQ138000 ntpd[1653]: Soliciting pool server 195.122.253.38
Oct 11 23:15:39 IQ138000 ntpd[1653]: Soliciting pool server 195.90.182.235
Oct 11 23:15:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 11 23:15:41 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:42 IQ138000 python3[1950]: Выполнение: mmcli -m wbc
Oct 11 23:15:42 IQ138000 python3[1950]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 11 23:15:42 IQ138000 python3[1950]:    --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 11 23:15:42 IQ138000 python3[1950]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   Hardware |         manufacturer: INCORPORATED
Oct 11 23:15:42 IQ138000 python3[1950]:            |                model: A7602E-H
Oct 11 23:15:42 IQ138000 python3[1950]:            |    firmware revision: A50C4B08A7600M7
Oct 11 23:15:42 IQ138000 python3[1950]:            |            supported: gsm-umts
Oct 11 23:15:42 IQ138000 python3[1950]:            |              current: gsm-umts
Oct 11 23:15:42 IQ138000 python3[1950]:            |         equipment id: 860803062234204
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   System   |               device: wbc
Oct 11 23:15:42 IQ138000 python3[1950]:            |              drivers: rndis_host, option
Oct 11 23:15:42 IQ138000 python3[1950]:            |               plugin: simtech
Oct 11 23:15:42 IQ138000 python3[1950]:            |         primary port: ttyUSB1
Oct 11 23:15:42 IQ138000 python3[1950]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 11 23:15:42 IQ138000 python3[1950]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 11 23:15:42 IQ138000 python3[1950]:            |                state: connected
Oct 11 23:15:42 IQ138000 python3[1950]:            |          power state: on
Oct 11 23:15:42 IQ138000 python3[1950]:            |          access tech: lte
Oct 11 23:15:42 IQ138000 python3[1950]:            |       signal quality: 93% (recent)
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   Modes    |            supported: allowed: any; preferred: none
Oct 11 23:15:42 IQ138000 python3[1950]:            |              current: allowed: any; preferred: none
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   3GPP     |                 imei: 860803062234204
Oct 11 23:15:42 IQ138000 python3[1950]:            |          operator id: 25099
Oct 11 23:15:42 IQ138000 python3[1950]:            |        operator name: beeline
Oct 11 23:15:42 IQ138000 python3[1950]:            |         registration: home
Oct 11 23:15:42 IQ138000 python3[1950]:            | packet service state: attached
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   3GPP EPS | ue mode of operation: csps-1
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:42 IQ138000 python3[1950]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 11 23:15:42 IQ138000 python3[1950]:            |                       slot 2: none
Oct 11 23:15:42 IQ138000 python3[1950]:   --------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 11 23:15:42 IQ138000 python3[1950]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:42 IQ138000 python3[1950]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 11 23:15:42 IQ138000 python3[1950]:    -------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 11 23:15:42 IQ138000 python3[1950]:   -------------------------------
Oct 11 23:15:42 IQ138000 python3[1950]:   Properties |            active: yes
Oct 11 23:15:42 IQ138000 python3[1950]:              |              imsi: 250997340491874
Oct 11 23:15:42 IQ138000 python3[1950]:              |             iccid: 8970199210429593744
Oct 11 23:15:42 IQ138000 python3[1950]:              |       operator id: 25099
Oct 11 23:15:42 IQ138000 python3[1950]:              |     operator name: Beeline
Oct 11 23:15:42 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:15:42 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:43 IQ138000 ntpd[1653]: Soliciting pool server 46.138.254.88
Oct 11 23:15:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:15:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 11 23:15:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:43 IQ138000 wb-mqtt-serial[1664]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:15:43 IQ138000 ntpd[1653]: Soliciting pool server 87.103.245.205
Oct 11 23:15:44 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:44 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:44 IQ138000 ntpd[1653]: Soliciting pool server 217.170.87.229
Oct 11 23:15:45 IQ138000 ntpd[1653]: Soliciting pool server 151.0.2.54
Oct 11 23:15:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:15:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 11 23:15:46 IQ138000 wb-mqtt-serial[1664]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 11 23:15:46 IQ138000 wb-mqtt-serial[1664]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 11 23:15:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:15:46 IQ138000 wb-mqtt-serial[1664]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
-- Boot c2a5785643204c3182bf2e1336c506f6 --
Oct 11 23:31:23 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:31:23 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:31:23 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:31:23 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:31:23 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:31:23 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:31:23 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:31:23 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:31:23 IQ138000 kernel: Zone ranges:
Oct 11 23:31:23 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:31:23 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:31:23 IQ138000 kernel: Movable zone start for each node
Oct 11 23:31:23 IQ138000 kernel: Early memory node ranges
Oct 11 23:31:23 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:31:23 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:31:23 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:31:23 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:31:23 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:31:23 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:31:23 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:31:23 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:31:23 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:31:23 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:31:23 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:31:23 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:31:23 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:31:23 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:31:23 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:31:23 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:31:23 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:31:23 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:31:23 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:31:23 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:31:23 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:31:23 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:31:23 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:31:23 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:31:23 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:31:23 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:31:23 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:31:23 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:31:23 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:31:23 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:31:23 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:31:23 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:31:23 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:31:23 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:31:23 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:31:23 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:31:23 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:31:23 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:31:23 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:31:23 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:31:23 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:31:23 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:31:23 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:31:23 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:31:23 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:31:23 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:31:23 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:31:23 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:31:23 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:31:23 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:31:23 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:31:23 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:31:23 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:31:23 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:31:23 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:31:23 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:31:23 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:31:23 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:31:23 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:31:23 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:31:23 IQ138000 kernel: No ATAGs?
Oct 11 23:31:23 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:31:23 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:31:23 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:31:23 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:31:23 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:31:23 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:31:23 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:31:23 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:31:23 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:31:23 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:31:23 IQ138000 kernel: PTP clock support registered
Oct 11 23:31:23 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:31:23 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:31:23 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:31:23 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:31:23 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:31:23 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:31:23 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:31:23 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:31:23 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:31:23 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:31:23 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:31:23 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:31:23 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:31:23 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:31:23 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:31:23 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:31:23 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:31:23 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:31:23 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:31:23 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:31:23 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:31:23 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:31:23 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:31:23 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:31:23 IQ138000 kernel: brd: module loaded
Oct 11 23:31:23 IQ138000 kernel: loop: module loaded
Oct 11 23:31:23 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:31:23 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:31:23 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:31:23 IQ138000 kernel: CAN device driver interface
Oct 11 23:31:23 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:31:23 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:31:23 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:31:23 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:31:23 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:31:23 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:31:23 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:31:23 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:31:23 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:31:23 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:31:23 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:31:23 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:31:23 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:31:23 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:31:23 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:31:23 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:31:23 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:31:23 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:31:23 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:31:23 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:31:23 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:31:23 IQ138000 kernel: can: controller area network core
Oct 11 23:31:23 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:31:23 IQ138000 kernel: can: raw protocol
Oct 11 23:31:23 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:31:23 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:31:23 IQ138000 kernel: can: SAE J1939
Oct 11 23:31:23 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:31:23 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:31:23 IQ138000 kernel: registered taskstats version 1
Oct 11 23:31:23 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:31:23 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:31:23 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:31:23 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:31:23 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:31:23 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:31:23 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:31:23 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:31:23 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:31:19 UTC (1760225479)
Oct 11 23:31:23 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:31:23 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:31:23 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:31:23 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:31:23 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:31:23 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:31:23 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:31:23 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:31:23 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:31:23 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:31:23 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:31:23 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:31:23 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:31:23 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:31:23 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: random: fast init done
Oct 11 23:31:23 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:31:23 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:31:23 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:31:23 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:31:23 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:31:23 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:31:23 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:31:23 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:31:23 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:31:23 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:31:23 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:31:23 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:31:23 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:31:23 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:31:23 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:31:23 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:31:23 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:31:23 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:31:23 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:31:23 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:31:23 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:31:23 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:31:23 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:31:23 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:31:23 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:31:23 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:31:23 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:31:23 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:31:23 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:31:23 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:31:23 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:31:23 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:31:23 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:31:23 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:31:23 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:31:23 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:31:23 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:31:23 IQ138000 kernel: of_cfs_init
Oct 11 23:31:23 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:31:23 IQ138000 kernel: ALSA device list:
Oct 11 23:31:23 IQ138000 kernel:   No soundcards found.
Oct 11 23:31:23 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:31:23 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:31:23 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:31:23 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:31:23 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:31:23 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:31:23 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:31:23 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:31:23 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:31:23 IQ138000 kernel:   with arguments:
Oct 11 23:31:23 IQ138000 kernel:     /sbin/init
Oct 11 23:31:23 IQ138000 kernel:   with environment:
Oct 11 23:31:23 IQ138000 kernel:     HOME=/
Oct 11 23:31:23 IQ138000 kernel:     TERM=linux
Oct 11 23:31:23 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:31:23 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:31:23 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:31:23 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:31:23 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:31:23 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:31:23 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:31:23 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:31:23 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:31:23 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:31:23 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:31:23 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:31:23 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:31:23 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:31:23 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:31:23 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:31:23 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:31:23 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:31:23 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:31:23 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:31:23 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:31:23 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:31:23 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:31:23 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:31:23 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:31:23 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:31:23 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:31:23 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:31:23 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:31:23 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:31:23 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:31:23 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:31:23 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:31:23 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:31:23 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:31:23 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:31:23 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:31:23 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:31:23 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:31:23 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:31:23 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:31:23 IQ138000 systemd-journald[141]: Journal started
Oct 11 23:31:23 IQ138000 systemd-journald[141]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:31:23 IQ138000 systemd-fsck[144]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
Oct 11 23:31:23 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:31:23 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:31:23 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:31:23 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:31:23 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:31:23 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:31:23 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:31:23 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:31:23 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:31:24 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:31:24 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:31:24 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:31:24 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:31:24 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:31:24 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:31:24 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:31:24 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:31:24 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:31:24 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:31:24 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:31:24 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:31:24 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:31:24 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:31:25 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 23:31:25 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:31:25 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:31:25 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:31:25 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:31:25 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:31:25 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:31:25 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:31:25 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:31:25 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:31:25 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:31:25 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:31:25 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:31:25 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 23:31:25 IQ138000 systemd-udevd[158]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:31:25 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:31:25 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:31:25 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:31:25 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:31:25 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:31:25 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:31:25 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:31:25 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:31:26 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:31:26 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:31:26 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:31:26 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:31:26 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:31:26 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:31:26 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 23:31:26 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:31:26 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 23:31:26 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:31:26 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:31:26 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:31:26 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:31:26 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:31:26 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:31:26 IQ138000 systemd-fsck[211]: data: recovering journal
Oct 11 23:31:26 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:31:26 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:31:26 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:31:26 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:31:26 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:31:26 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:31:26 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:31:26 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:31:26 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:31:26 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:31:26 IQ138000 systemd-fsck[211]: data: clean, 16467/328656 files, 370119/1313536 blocks
Oct 11 23:31:26 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:31:26 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:31:26 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:31:26 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:31:26 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:31:26 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:31:26 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:31:26 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:31:26 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:31:26 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:31:26 IQ138000 systemd-journald[141]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.666ms for 462 entries.
Oct 11 23:31:26 IQ138000 systemd-journald[141]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 492.3M, max 496.6M, 4.3M free.
Oct 11 23:31:26 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 23:31:27 IQ138000 wb-configs-early[221]: Checking symlinks to /mnt/data
Oct 11 23:31:27 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 23:31:27 IQ138000 kernel: random: crng init done
Oct 11 23:31:27 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 23:31:27 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 23:31:27 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 23:31:27 IQ138000 wb-configs-early[221]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 23:31:27 IQ138000 wb-configs-early[221]: Setting ownership www-data to /mnt/data/uploads
Oct 11 23:31:27 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 23:31:27 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 23:31:27 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 23:31:27 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 23:31:27 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 23:31:28 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 23:31:28 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 23:31:28 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 23:31:28 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 23:31:28 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 23:31:28 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 23:31:28 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 23:31:28 IQ138000 systemd[1]: Reached target Timers.
Oct 11 23:31:28 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 23:31:28 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 23:31:28 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 23:31:28 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 23:31:28 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 23:31:28 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 23:31:28 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 23:31:28 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 23:31:28 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:31:28 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 23:31:28 IQ138000 cron[298]: (CRON) INFO (pidfile fd = 3)
Oct 11 23:31:28 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 23:31:28 IQ138000 cron[298]: (CRON) INFO (Running @reboot jobs)
Oct 11 23:31:28 IQ138000 bluetoothd[295]: Bluetooth daemon 5.55
Oct 11 23:31:28 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 23:31:28 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 23:31:28 IQ138000 bluetoothd[295]: Starting SDP server
Oct 11 23:31:28 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 23:31:28 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:31:28 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 23:31:28 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 23:31:28 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 23:31:28 IQ138000 bluetoothd[295]: Bluetooth management interface 1.18 initialized
Oct 11 23:31:28 IQ138000 dbus-daemon[299]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=295 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 23:31:28 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 23:31:28 IQ138000 bluetoothd[295]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 23:31:28 IQ138000 bluetoothd[295]: sap-server: Operation not permitted (1)
Oct 11 23:31:28 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 23:31:28 IQ138000 config-manager[296]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:31:28 IQ138000 config-manager[296]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:31:28 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 23:31:28 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:31:28 IQ138000 wb-watchdog[328]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 23:31:28 IQ138000 migrate.sh[326]: Error: No such file or directory
Oct 11 23:31:28 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:31:28 IQ138000 migrate.sh[334]: Error: No such file or directory
Oct 11 23:31:28 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 23:31:29 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:31:29 IQ138000 polkitd[327]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 23:31:29 IQ138000 systemd[1]: Started watch config files.
Oct 11 23:31:29 IQ138000 reverse-ssh.sh[347]: Error: No such file or directory
Oct 11 23:31:29 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 23:31:29 IQ138000 migrate.sh[348]: Error: No such file or directory
Oct 11 23:31:29 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 23:31:29 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 23:31:29 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 23:31:29 IQ138000 rules-preprocessor[338]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:31:29 IQ138000 rules-preprocessor[338]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:31:29 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 23:31:29 IQ138000 migrate.sh[363]: Error: No such file or directory
Oct 11 23:31:29 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 23:31:29 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Successfully dropped root privileges.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: avahi-daemon 0.8 starting up.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Successfully called chroot().
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Successfully dropped remaining capabilities.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: No service file found in /etc/avahi/services.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv6 for mDNS.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: New relevant interface lo.IPv4 for mDNS.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Network interface enumeration completed.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Registering new address record for ::1 on lo.*.
Oct 11 23:31:29 IQ138000 avahi-daemon[365]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 23:31:29 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:31:29 IQ138000 migrate.sh[379]: Error: No such file or directory
Oct 11 23:31:29 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:31:29 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 23:31:29 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 11 23:31:29 IQ138000 wb-watch-configs[387]: Watched dirs: /etc /etc/network
Oct 11 23:31:29 IQ138000 wpa_supplicant[376]: Successfully initialized wpa_supplicant
Oct 11 23:31:29 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 23:31:29 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 23:31:29 IQ138000 systemd-logind[346]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 23:31:29 IQ138000 systemd-logind[346]: New seat seat0.
Oct 11 23:31:29 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:29 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 23:31:29 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 23:31:29 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 23:31:29 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:29 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:31:29 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:31:29 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:31:29 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 23:31:29 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 23:31:29 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:29 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:31:29 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 23:31:29 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 23:31:29 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 23:31:29 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:31:29 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:31:29 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 23:31:29 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 23:31:29 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 23:31:29 IQ138000 systemd[1]: Started User Login Management.
Oct 11 23:31:30 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 23:31:30 IQ138000 monit[319]: Starting daemon monitor: monit.
Oct 11 23:31:30 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 23:31:30 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 23:31:30 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.1280] NetworkManager (version 1.42.4) is starting... (boot:c2a57856-4320-4c31-82bf-2e1336c506f6)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.1284] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.1539] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 23:31:30 IQ138000 systemd[1]: Started Network Manager.
Oct 11 23:31:30 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 23:31:30 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.2276] manager[0x737128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 23:31:30 IQ138000 avahi-daemon[365]: Server startup complete. Host name is IQ138000.local. Local service cookie is 1709051632.
Oct 11 23:31:30 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 23:31:30 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 23:31:30 IQ138000 ModemManager[470]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 23:31:30 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 23:31:30 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.6757] hostname: hostname: using hostnamed
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.6760] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.6795] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.6895] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.6914] manager[0x737128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.6916] manager[0x737128]: rfkill: WWAN hardware radio set enabled
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7213] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7373] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7415] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7698] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7750] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7810] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7826] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7839] manager: Networking is enabled by state file
Oct 11 23:31:30 IQ138000 dbus-daemon[299]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7898] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7901] settings: Loaded settings plugin: keyfile (internal)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7902] ifupdown: management mode: unmanaged
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7903] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.7905] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 23:31:30 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:31:30 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.8615] dhcp: init: Using DHCP client 'internal'
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.8642] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.8801] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.8871] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.9016] device (lo): Activation: starting connection 'lo' (42402f32-e2bd-441f-9c26-fcc15444ab2c)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.9127] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 23:31:30 IQ138000 NetworkManager[404]: <info>  [1760225490.9176] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:30 IQ138000 dbus-daemon[299]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:31:30 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.2728] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.2771] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.2806] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.2887] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 23:31:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 23:31:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 23:31:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 23:31:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.4931] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.4978] device (wlan0): driver supports Access Point (AP) mode
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.5028] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 23:31:31 IQ138000 NetworkManager[404]: <info>  [1760225491.5056] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:31 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 23:31:32 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.3387] device (wlan1): driver supports Access Point (AP) mode
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.3435] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.3465] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.4314] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.4337] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.4353] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.4404] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 wpa_supplicant[376]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.5024] modem-manager: ModemManager available
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.5028] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.5045] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.5158] device (lo): Activation: successful, device activated.
Oct 11 23:31:32 IQ138000 wpa_supplicant[376]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8220] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8226] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8247] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8266] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8381] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8387] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8407] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8428] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8559] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8677] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8766] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:31:32 IQ138000 NetworkManager[404]: <info>  [1760225492.8811] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:33 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 23:31:33 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 23:31:33 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 23:31:36 IQ138000 wpa_supplicant[376]: wlan1: Reject scan trigger since one is already pending
Oct 11 23:31:36 IQ138000 init.sh[1318]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 23:31:36 IQ138000 init.sh[1333]: In file included from -:16:
Oct 11 23:31:36 IQ138000 init.sh[1333]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:36 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:31:36 IQ138000 init.sh[1318]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 23:31:36 IQ138000 init.sh[1318]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 23:31:36 IQ138000 init.sh[1393]: In file included from -:11:
Oct 11 23:31:36 IQ138000 init.sh[1393]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:37 IQ138000 init.sh[1318]: ...
Oct 11 23:31:37 IQ138000 init.sh[1408]: In file included from -:11:
Oct 11 23:31:37 IQ138000 init.sh[1408]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:37 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 23:31:37 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 23:31:37 IQ138000 init.sh[1318]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 23:31:37 IQ138000 init.sh[1427]: In file included from -:24:
Oct 11 23:31:37 IQ138000 init.sh[1427]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:37 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:31:37 IQ138000 init.sh[1318]: ...
Oct 11 23:31:37 IQ138000 init.sh[1443]: In file included from -:24:
Oct 11 23:31:37 IQ138000 init.sh[1443]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:38 IQ138000 init.sh[1318]: failsafe bias enabled
Oct 11 23:31:38 IQ138000 init.sh[1318]: terminators are enabled
Oct 11 23:31:38 IQ138000 init.sh[1318]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 23:31:38 IQ138000 init.sh[1465]: In file included from -:11:
Oct 11 23:31:38 IQ138000 init.sh[1465]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:38 IQ138000 init.sh[1318]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 23:31:38 IQ138000 init.sh[1488]: In file included from -:11:
Oct 11 23:31:38 IQ138000 init.sh[1488]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:31:38 IQ138000 init.sh[1318]: ...
Oct 11 23:31:38 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 23:31:38 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 23:31:38 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 23:31:38 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 23:31:38 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 23:31:39 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 23:31:39 IQ138000 systemd[1]: Reached target Network.
Oct 11 23:31:39 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 23:31:39 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 23:31:39 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:31:39 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:31:39 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 23:31:39 IQ138000 knxd[1606]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:31:39 IQ138000 knxd[1606]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:31:39 IQ138000 lsyncd[1614]: 23:31:39 Normal: --- Startup ---
Oct 11 23:31:39 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 23:31:39 IQ138000 lsyncd[1614]: 23:31:39 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:31:39 IQ138000 lsyncd[1614]: iq_network_manager/iq_network_manager.log
Oct 11 23:31:39 IQ138000 lsyncd[1614]: journal
Oct 11 23:31:39 IQ138000 lsyncd[1614]: messages
Oct 11 23:31:39 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:31:39 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 23:31:39 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 23:31:39 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 23:31:39 IQ138000 lsyncd[1633]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:31:39 IQ138000 lsyncd[1626]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:31:39 IQ138000 lsyncd[1626]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 23:31:39 IQ138000 lsyncd[1614]: 23:31:39 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:31:39 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 23:31:39 IQ138000 ntpd[1622]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 23:31:39 IQ138000 ntpd[1622]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 23:31:39 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 23:31:39 IQ138000 ntpd[1622]: ntp-4 is maintained by Network Time Foundation,
Oct 11 23:31:39 IQ138000 ntpd[1622]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 23:31:39 IQ138000 ntpd[1622]: corporation.  Support and training for ntp-4 are
Oct 11 23:31:39 IQ138000 ntpd[1622]: available at https://www.nwtime.org/support
Oct 11 23:31:39 IQ138000 ntpd[1622]: ----------------------------------------------------
Oct 11 23:31:39 IQ138000 ntpd[1647]: proto: precision = 1.000 usec (-20)
Oct 11 23:31:39 IQ138000 persist_meter_data.sh[1648]: Error: No such file or directory
Oct 11 23:31:39 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 23:31:39 IQ138000 ntpd[1647]: basedate set to 2020-09-11
Oct 11 23:31:39 IQ138000 ntpd[1647]: gps base set to 2020-09-13 (week 2123)
Oct 11 23:31:39 IQ138000 ntpd[1647]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 23:31:39 IQ138000 ntpd[1647]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 23:31:39 IQ138000 wb-knxd-config.sh[1517]: No /dev/ttyKNX found, disabling level2
Oct 11 23:31:39 IQ138000 wb-knxd-config.sh[1517]: Restart knxd
Oct 11 23:31:39 IQ138000 ntpd[1647]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 23:31:39 IQ138000 ntpd[1647]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 23:31:39 IQ138000 ntpd[1647]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 23:31:39 IQ138000 ntpd[1647]: Listen normally on 3 lo [::1]:123
Oct 11 23:31:39 IQ138000 ntpd[1647]: Listening on routing socket on fd #20 for interface updates
Oct 11 23:31:39 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 23:31:40 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 23:31:40 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 23:31:40 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:31:40 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:31:40 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 23:31:40 IQ138000 wb-mqtt-w1[1687]: MQTT broker localhost:1883
Oct 11 23:31:40 IQ138000 wb-mqtt-w1[1687]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:40 IQ138000 wb-mqtt-w1[1687]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:31:40 IQ138000 wb-mqtt-w1[1687]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 23:31:40 IQ138000 wb-mqtt-w1[1687]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 23:31:40 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:31:40 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:31:40 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 23:31:40 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 23:31:40 IQ138000 wb-connection-manager[1505]: Connection LegacyWiFi not found, skipping
Oct 11 23:31:40 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:31:40 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 23:31:40 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 23:31:40 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:40 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:31:40 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:31:40 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:31:40 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 23:31:40 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 23:31:40 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:40 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 23:31:40 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 23:31:40 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:31:40 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 23:31:40 IQ138000 wb-connection-manager[1505]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 23:31:40 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 23:31:40 IQ138000 ntpd[1647]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:31:40 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 23:31:40 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 23:31:40 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 23:31:40 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 23:31:40 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 23:31:40 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 23:31:40 IQ138000 sshd[1741]: Server listening on 0.0.0.0 port 22.
Oct 11 23:31:40 IQ138000 sshd[1741]: Server listening on :: port 22.
Oct 11 23:31:40 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 23:31:41 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 23:31:41 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 23:31:41 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 23:31:41 IQ138000 vnstatd[1657]: Info: vnStat daemon 2.6 started. (pid:1657 uid:110 gid:117 64-bit)
Oct 11 23:31:41 IQ138000 vnstatd[1657]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 23:31:41 IQ138000 vnstatd[1657]: Info: Interface "ppp0" disabled.
Oct 11 23:31:41 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 23:31:41 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <error> [1760225501.2834] audit: failed to open auditd socket: Protocol not supported
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.2837] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1505 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 23:31:41 IQ138000 wb-connection-manager[1505]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 23:31:41 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:41 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:31:41 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 23:31:41 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 23:31:41 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:31:41 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:31:41 IQ138000 wpa_supplicant[376]: wlan0: Reject scan trigger since one is already pending
Oct 11 23:31:41 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 23:31:41 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:31:41 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:31:41 IQ138000 knxd[1846]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:31:41 IQ138000 knxd[1846]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.7489] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.7503] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1505 uid=0 result="success"
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.7531] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.7683] manager: NetworkManager state is now CONNECTING
Oct 11 23:31:41 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8034] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8080] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8082] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:41 IQ138000 ntpd[1647]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:31:41 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8335] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8470] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8557] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8582] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8585] Config: added 'scan_ssid' value '1'
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8595] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 23:31:41 IQ138000 reverse-ssh.sh[1882]: Error: No such file or directory
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8597] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 23:31:41 IQ138000 NetworkManager[404]: <info>  [1760225501.8599] Config: added 'psk' value '<hidden>'
Oct 11 23:31:41 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 23:31:41 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:31:42 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 23:31:42 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:42 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:31:42 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:42 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:31:42 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:31:42 IQ138000 NetworkManager[404]: <info>  [1760225502.2101] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 23:31:42 IQ138000 NetworkManager[404]: <info>  [1760225502.2104] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 23:31:42 IQ138000 wb-adjust-systime[1888]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 23:31:42 IQ138000 wb-adjust-systime[1888]: Drift file is valid (was recently edited)
Oct 11 23:31:42 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Warning: Error resolving bridge address: Name or service not known.
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 23:31:42 IQ138000 mosquitto[1924]: 1760225502: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 23:31:42 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 23:31:42 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 23:31:42 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 23:31:42 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 23:31:42 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 23:31:42 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 23:31:42 IQ138000 ntpd[1647]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:31:42 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 23:31:42 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 23:31:42 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: MQTT broker localhost:1883
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: Config file /etc/wb-mqtt-db.conf
Oct 11 23:31:43 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:43 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 23:31:43 IQ138000 systemd[1]: Started metrics sender.
Oct 11 23:31:43 IQ138000 wb-mqtt-knx[2030]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:43 IQ138000 wb-mqtt-knx[2030]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] Creating tables if necessary
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] Create indices if necessary
Oct 11 23:31:43 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] Analyzing data table
Oct 11 23:31:43 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 23:31:43 IQ138000 wb-mqtt-logs[2033]: MQTT broker localhost:1883
Oct 11 23:31:43 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 23:31:43 IQ138000 wb-mqtt-logs[2033]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:43 IQ138000 wb-mqtt-logs[2033]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:43 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:31:43 IQ138000 ntpd[1647]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:31:43 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:31:43 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.553s CPU time.
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [gpio driver] Started
Oct 11 23:31:43 IQ138000 wb-mqtt-gpio[1793]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:31:43 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 23:31:43 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:44 IQ138000 wb-mqtt-confed[2007]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:31:44 IQ138000 wb-mqtt-confed[2007]: INFO: [wbgo_mqtt] confed-IQ138000-2007: MQTT connection established
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2022]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:31:44 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2072]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 11 23:31:44 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 23:31:44 IQ138000 wb-mqtt-opcua[2185]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 23:31:44 IQ138000 wb-mqtt-iec104[2168]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 23:31:45 IQ138000 wb-mqtt-opcua[2185]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 23:31:45 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 23:31:45 IQ138000 wb-mqtt-mbgate[2046]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 23:31:45 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 23:31:45 IQ138000 wb-mqtt-iec104[2168]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 23:31:45 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 23:31:45 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:31:45 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 23:31:45 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:31:45 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 23:31:45 IQ138000 wb-mqtt-logs[2033]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:45 IQ138000 wb-mqtt-logs[2033]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:45 IQ138000 wb-mqtt-logs[2033]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:45 IQ138000 wb-mqtt-logs[2033]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:31:46 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 23:31:46 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 23:31:46 IQ138000 wb-mqtt-knx[2030]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:46 IQ138000 wb-mqtt-knx[2030]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:46 IQ138000 wb-mqtt-knx[2030]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:46 IQ138000 wb-mqtt-knx[2030]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:31:46 IQ138000 wb-mqtt-knx[2030]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 23:31:47 IQ138000 python3[1978]: No data file found at /tmp/network_status_cache.json
Oct 11 23:31:47 IQ138000 python3[1978]: Connecting to MQTT
Oct 11 23:31:47 IQ138000 python3[1978]: Connected to MQTT
Oct 11 23:31:47 IQ138000 python3[1978]: Connection returned result: Connection Accepted.
Oct 11 23:31:47 IQ138000 NetworkManager[404]: <info>  [1760225507.9476] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 23:31:47 IQ138000 NetworkManager[404]: <info>  [1760225507.9519] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 23:31:49 IQ138000 dbus-daemon[299]: [system] Connection :1.17 (uid=0 pid=2065 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 23:31:49 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:31:49 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:31:49 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:31:49 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:31:49 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:31:50 IQ138000 wb-device-manager[1994]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 23:31:50 IQ138000 wb-device-manager[1994]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New virtual device lo 42402f32-e2bd-441f-9c26-fcc15444ab2c /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:31:50 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:50 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:31:50 IQ138000 wb-mqtt-nm-helper[2065]: INFO:root:New active connection lo 42402f32-e2bd-441f-9c26-fcc15444ab2c /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 23:31:51 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 23:31:51 IQ138000 kernel: dc5ldo: disabling
Oct 11 23:31:51 IQ138000 kernel: dldo4: disabling
Oct 11 23:31:51 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: MQTT broker localhost:1883
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] ADC worker thread is started
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:31:52 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:31:52 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:31:52 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:31:52 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:31:52 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:31:52 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:31:52 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:31:52 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 23:31:52 IQ138000 knxd[3155]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:31:52 IQ138000 knxd[3155]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:31:52 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:31:52 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:31:52 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:31:52 IQ138000 wb-mqtt-confed[2007]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-db[2012]: INFO: [sqlite] DB initialization is done
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-gsm[3329]: main: Called from pid 1 (systemd)
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-mqtt-serial[1678]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 23:31:53 IQ138000 wb-gsm[3369]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:31:54 IQ138000 wb-usb-otg-start.sh[3425]: : wb-usb-otg-start
Oct 11 23:31:54 IQ138000 wb-usb-otg-start.sh[3425]: main: setup_device()
Oct 11 23:31:54 IQ138000 wb-gsm[3445]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:31:54 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 23:31:54 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 23:31:54 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 23:31:54 IQ138000 kernel: using random self ethernet address
Oct 11 23:31:54 IQ138000 kernel: using random host ethernet address
Oct 11 23:31:54 IQ138000 wb-usb-otg-start.sh[3425]: main: enabling profile rndis
Oct 11 23:31:54 IQ138000 NetworkManager[404]: <info>  [1760225514.5593] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 23:31:54 IQ138000 systemd-udevd[3439]: Using default interface naming scheme 'v247'.
Oct 11 23:31:54 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 23:31:54 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 23:31:54 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 23:31:54 IQ138000 NetworkManager[404]: <info>  [1760225514.7341] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:31:54 IQ138000 wb-gsm[3501]: should_enable: Should enable GSM modem
Oct 11 23:31:54 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 23:31:54 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: DB logger started, go to main loop
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 23:31:55 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 23:31:55 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:31:56 IQ138000 wb-gsm[3578]: main: Called from pid 3503 (wb-gsm-mm)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 23:31:56 IQ138000 wb-mqtt-db[2012]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 23:31:56 IQ138000 wb-gsm[3590]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 23:31:56 IQ138000 wb-gsm[3613]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:31:56 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 23:31:56 IQ138000 NetworkManager[404]: <info>  [1760225516.6824] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 23:31:56 IQ138000 NetworkManager[404]: <info>  [1760225516.6826] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 23:31:56 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 23:31:57 IQ138000 ModemManager[470]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:31:57 IQ138000 python3[1978]: Выполнение: service wb-connection-manager stop
Oct 11 23:31:57 IQ138000 npm[1692]: > zigbee2mqtt@2.1.1 start
Oct 11 23:31:57 IQ138000 npm[1692]: > node index.js
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 23:31:57 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 23:31:58 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:31:59 IQ138000 wb-mqtt-serial[1678]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
-- Boot 4de941dcf5d54de4bb5ba488fc316879 --
Oct 11 23:33:30 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:33:30 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:33:30 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:33:30 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:33:30 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:33:30 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:33:30 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:33:30 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:33:30 IQ138000 kernel: Zone ranges:
Oct 11 23:33:30 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:33:30 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:33:30 IQ138000 kernel: Movable zone start for each node
Oct 11 23:33:30 IQ138000 kernel: Early memory node ranges
Oct 11 23:33:30 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:33:30 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:33:30 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:33:30 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:33:30 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:33:30 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:33:30 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:33:30 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:33:30 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:33:30 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:33:30 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:33:30 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:33:30 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:33:30 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:33:30 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:33:30 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:33:30 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:33:30 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:33:30 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:33:30 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:33:30 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:33:30 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:33:30 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:33:30 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:33:30 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:33:30 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:33:30 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:33:30 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:33:30 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:33:30 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:33:30 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:33:30 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:33:30 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:33:30 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:33:30 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:33:30 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:33:30 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:33:30 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:33:30 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:33:30 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:33:30 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:33:30 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:33:30 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:33:30 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:33:30 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:33:30 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:33:30 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:33:30 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:33:30 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:33:30 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:33:30 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:33:30 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:33:30 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:33:30 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:33:30 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:33:30 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:33:30 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:33:30 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:33:30 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:33:30 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:33:30 IQ138000 kernel: No ATAGs?
Oct 11 23:33:30 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:33:30 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:33:30 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:33:30 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:33:30 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:33:30 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:33:30 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:33:30 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:33:30 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:33:30 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:33:30 IQ138000 kernel: PTP clock support registered
Oct 11 23:33:30 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:33:30 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:33:30 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:33:30 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:33:30 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:33:30 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:33:30 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:33:30 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:33:30 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:33:30 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:33:30 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:33:30 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:33:30 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:33:30 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:33:30 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:33:30 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:33:30 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:33:30 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:33:30 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:33:30 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:33:30 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:33:30 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:33:30 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:33:30 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:33:30 IQ138000 kernel: brd: module loaded
Oct 11 23:33:30 IQ138000 kernel: loop: module loaded
Oct 11 23:33:30 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:33:30 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:33:30 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:33:30 IQ138000 kernel: CAN device driver interface
Oct 11 23:33:30 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:33:30 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:33:30 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:33:30 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:33:30 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:33:30 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:33:30 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:33:30 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:33:30 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:33:30 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:33:30 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:33:30 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:33:30 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:33:30 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:33:30 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:33:30 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:33:30 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:33:30 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:33:30 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:33:30 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:33:30 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:33:30 IQ138000 kernel: can: controller area network core
Oct 11 23:33:30 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:33:30 IQ138000 kernel: can: raw protocol
Oct 11 23:33:30 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:33:30 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:33:30 IQ138000 kernel: can: SAE J1939
Oct 11 23:33:30 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:33:30 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:33:30 IQ138000 kernel: registered taskstats version 1
Oct 11 23:33:30 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:33:30 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:33:30 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:33:30 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:33:30 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:33:30 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:33:30 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:33:30 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:33:30 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:33:26 UTC (1760225606)
Oct 11 23:33:30 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:33:30 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:33:30 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:33:30 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:33:30 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:33:30 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:33:30 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:33:30 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:33:30 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:33:30 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:33:30 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:33:30 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:33:30 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:33:30 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:33:30 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: random: fast init done
Oct 11 23:33:30 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:33:30 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:33:30 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:33:30 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:33:30 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:33:30 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:33:30 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:33:30 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:33:30 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:33:30 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:33:30 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:33:30 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:33:30 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:33:30 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:33:30 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:33:30 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:33:30 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:33:30 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:33:30 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:33:30 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:33:30 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:33:30 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:33:30 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:33:30 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:33:30 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:33:30 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:33:30 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:33:30 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:33:30 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:33:30 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:33:30 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:33:30 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:33:30 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:33:30 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:33:30 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:33:30 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:33:30 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:33:30 IQ138000 kernel: of_cfs_init
Oct 11 23:33:30 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:33:30 IQ138000 kernel: ALSA device list:
Oct 11 23:33:30 IQ138000 kernel:   No soundcards found.
Oct 11 23:33:30 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:33:30 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:33:30 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:33:30 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:33:30 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:33:30 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:33:30 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:33:30 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:33:30 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:33:30 IQ138000 kernel:   with arguments:
Oct 11 23:33:30 IQ138000 kernel:     /sbin/init
Oct 11 23:33:30 IQ138000 kernel:   with environment:
Oct 11 23:33:30 IQ138000 kernel:     HOME=/
Oct 11 23:33:30 IQ138000 kernel:     TERM=linux
Oct 11 23:33:30 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:33:30 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:33:30 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:33:30 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:33:30 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:33:30 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:33:30 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:33:30 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:33:30 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:33:30 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:33:30 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:33:30 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:33:30 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:33:30 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:33:30 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:33:30 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:33:30 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:33:30 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:33:30 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:33:30 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:33:30 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:33:30 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:33:30 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:33:30 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:33:30 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:33:30 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:33:30 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:33:30 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:33:30 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:33:30 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:33:30 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:33:30 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:33:30 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:33:30 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:33:30 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:33:30 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:33:30 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:33:30 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:33:30 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:33:30 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:33:30 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:33:30 IQ138000 systemd-journald[139]: Journal started
Oct 11 23:33:30 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:33:30 IQ138000 systemd-fsck[142]: rootfs1: clean, 37040/131072 files, 278737/524288 blocks
Oct 11 23:33:30 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:33:30 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:33:30 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:33:30 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:33:30 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:33:30 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:33:30 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:33:30 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:33:30 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:33:31 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:33:31 IQ138000 systemd-random-seed[150]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:33:31 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:33:31 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:33:31 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:33:31 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:33:31 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:33:31 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:33:31 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:33:31 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:33:31 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:33:31 IQ138000 systemd-udevd[155]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:33:31 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:33:31 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:33:32 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 11 23:33:32 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:33:32 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:33:32 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:33:32 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:33:32 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:33:32 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:33:32 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:33:32 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:33:32 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:33:32 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:33:32 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:33:32 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:33:32 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:33:32 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 23:33:32 IQ138000 systemd-udevd[164]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:33:32 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:33:32 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:33:32 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:33:32 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:33:33 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:33:33 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:33:33 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:33:33 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:33:33 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:33:33 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:33:33 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:33:33 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 23:33:33 IQ138000 systemd-udevd[164]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:33:33 IQ138000 systemd-udevd[157]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:33:33 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:33:33 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:33:33 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:33:33 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:33:33 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:33:33 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:33:33 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:33:33 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:33:33 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:33:33 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:33:33 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:33:33 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:33:33 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:33:33 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:33:33 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:33:33 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:33:33 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:33:33 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:33:33 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 23:33:33 IQ138000 systemd-fsck[216]: data: clean, 16468/328656 files, 372167/1313536 blocks
Oct 11 23:33:33 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:33:33 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:33:34 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:33:34 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:33:34 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:33:34 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:33:34 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:33:34 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:33:34 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:33:34 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 48.801ms for 461 entries.
Oct 11 23:33:34 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 500.3M, max 496.6M, 0B free.
Oct 11 23:33:34 IQ138000 kernel: random: crng init done
Oct 11 23:33:34 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 11 23:33:34 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 11 23:33:34 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 11 23:33:34 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 11 23:33:34 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 11 23:33:34 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 11 23:33:34 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 11 23:33:35 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 11 23:33:35 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 11 23:33:35 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 11 23:33:35 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 11 23:33:35 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 11 23:33:35 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 11 23:33:35 IQ138000 systemd[1]: Reached target System Initialization.
Oct 11 23:33:35 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 11 23:33:35 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 11 23:33:35 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 11 23:33:35 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 11 23:33:35 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 11 23:33:35 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 11 23:33:35 IQ138000 systemd[1]: Reached target Timers.
Oct 11 23:33:35 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 11 23:33:35 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 11 23:33:35 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 11 23:33:35 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 11 23:33:35 IQ138000 systemd[1]: Reached target Sockets.
Oct 11 23:33:35 IQ138000 systemd[1]: Reached target Basic System.
Oct 11 23:33:35 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 11 23:33:35 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 11 23:33:35 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:33:35 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 11 23:33:35 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 11 23:33:35 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 11 23:33:35 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 11 23:33:35 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 11 23:33:35 IQ138000 systemd[1]: Starting Network Manager...
Oct 11 23:33:35 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 11 23:33:36 IQ138000 bluetoothd[296]: Starting SDP server
Oct 11 23:33:36 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 11 23:33:36 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 11 23:33:36 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 11 23:33:36 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 11 23:33:36 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 11 23:33:36 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 11 23:33:36 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 11 23:33:36 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 11 23:33:36 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 11 23:33:36 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 11 23:33:36 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 11 23:33:36 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 11 23:33:36 IQ138000 wb-watchdog[327]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 11 23:33:36 IQ138000 migrate.sh[323]: Error: No such file or directory
Oct 11 23:33:36 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:33:36 IQ138000 migrate.sh[333]: Error: No such file or directory
Oct 11 23:33:36 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:33:36 IQ138000 migrate.sh[343]: Error: No such file or directory
Oct 11 23:33:36 IQ138000 systemd[1]: Starting User Login Management...
Oct 11 23:33:36 IQ138000 reverse-ssh.sh[345]: Error: No such file or directory
Oct 11 23:33:36 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:33:36 IQ138000 polkitd[329]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 11 23:33:36 IQ138000 systemd[1]: Started watch config files.
Oct 11 23:33:36 IQ138000 migrate.sh[357]: Error: No such file or directory
Oct 11 23:33:36 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 11 23:33:36 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 11 23:33:36 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 11 23:33:36 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 11 23:33:36 IQ138000 migrate.sh[365]: Error: No such file or directory
Oct 11 23:33:36 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 11 23:33:36 IQ138000 rules-preprocessor[338]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:33:36 IQ138000 rules-preprocessor[338]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:33:36 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 11 23:33:36 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Successfully dropped root privileges.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: avahi-daemon 0.8 starting up.
Oct 11 23:33:36 IQ138000 wb-watch-configs[386]: Watched dirs: /etc /etc/network
Oct 11 23:33:36 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Successfully called chroot().
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Successfully dropped remaining capabilities.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: No service file found in /etc/avahi/services.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv6 for mDNS.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: New relevant interface lo.IPv4 for mDNS.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Network interface enumeration completed.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Registering new address record for ::1 on lo.*.
Oct 11 23:33:36 IQ138000 avahi-daemon[370]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 11 23:33:36 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 23:33:36 IQ138000 wpa_supplicant[384]: Successfully initialized wpa_supplicant
Oct 11 23:33:36 IQ138000 systemd-logind[350]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 11 23:33:36 IQ138000 systemd-logind[350]: New seat seat0.
Oct 11 23:33:36 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 11 23:33:36 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 11 23:33:36 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:36 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 11 23:33:36 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 11 23:33:36 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 11 23:33:36 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:36 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:33:36 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:33:36 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:33:36 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 11 23:33:36 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 11 23:33:36 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:37 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:33:37 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 11 23:33:37 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 11 23:33:37 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 11 23:33:37 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 11 23:33:37 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 11 23:33:37 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 11 23:33:37 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 11 23:33:37 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:33:37 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:33:37 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 11 23:33:37 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 11 23:33:37 IQ138000 systemd[1]: Started WPA supplicant.
Oct 11 23:33:37 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 11 23:33:37 IQ138000 systemd[1]: Started User Login Management.
Oct 11 23:33:37 IQ138000 monit[320]: Starting daemon monitor: monit.
Oct 11 23:33:37 IQ138000 NetworkManager[407]: <info>  [1760225617.3509] NetworkManager (version 1.42.4) is starting... (boot:4de941dc-f5d5-4de4-bb5b-a488fc316879)
Oct 11 23:33:37 IQ138000 NetworkManager[407]: <info>  [1760225617.3513] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 11 23:33:37 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 11 23:33:37 IQ138000 NetworkManager[407]: <info>  [1760225617.3681] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 11 23:33:37 IQ138000 systemd[1]: Started Authorization Manager.
Oct 11 23:33:37 IQ138000 systemd[1]: Started Bluetooth service.
Oct 11 23:33:37 IQ138000 NetworkManager[407]: <info>  [1760225617.4181] manager[0x747128]: monitoring kernel firmware directory '/lib/firmware'.
Oct 11 23:33:37 IQ138000 systemd[1]: Started Network Manager.
Oct 11 23:33:37 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 11 23:33:37 IQ138000 avahi-daemon[370]: Server startup complete. Host name is IQ138000.local. Local service cookie is 4288981074.
Oct 11 23:33:37 IQ138000 systemd[1]: Starting Modem Manager...
Oct 11 23:33:37 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 11 23:33:37 IQ138000 systemd[1]: Starting Hostname Service...
Oct 11 23:33:37 IQ138000 ModemManager[471]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 11 23:33:37 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 11 23:33:37 IQ138000 systemd[1]: Started Hostname Service.
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225617.9998] hostname: hostname: using hostnamed
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0002] hostname: static hostname changed from (none) to "IQ138000"
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0085] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0159] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0174] manager[0x747128]: rfkill: Wi-Fi hardware radio set enabled
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0176] manager[0x747128]: rfkill: WWAN hardware radio set enabled
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0492] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0569] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0603] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 11 23:33:38 IQ138000 systemd[1]: Started Modem Manager.
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0833] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0872] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0890] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0894] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0898] manager: Networking is enabled by state file
Oct 11 23:33:38 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=407 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0953] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0967] settings: Loaded settings plugin: keyfile (internal)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0976] ifupdown: management mode: unmanaged
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0986] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.0994] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 11 23:33:38 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.1780] dhcp: init: Using DHCP client 'internal'
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.1803] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.1905] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.1952] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.2014] device (lo): Activation: starting connection 'lo' (72c3144b-d0c6-46c8-ac38-331a7ebc4bfe)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.2088] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.2112] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:33:38 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 11 23:33:38 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.5695] device (eth1): driver '(null)' does not support carrier detection.
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.5719] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.5749] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.5777] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:33:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 11 23:33:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 11 23:33:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 11 23:33:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 11 23:33:38 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.7896] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.7996] device (wlan0): driver supports Access Point (AP) mode
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.8089] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 11 23:33:38 IQ138000 NetworkManager[407]: <info>  [1760225618.8141] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:33:38 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 11 23:33:39 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.6541] device (wlan1): driver supports Access Point (AP) mode
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.6621] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.6672] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.7349] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.7405] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.7532] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.7666] modem-manager: ModemManager available
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.7688] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.8108] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.8149] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 11 23:33:39 IQ138000 NetworkManager[407]: <info>  [1760225619.8227] device (lo): Activation: successful, device activated.
Oct 11 23:33:39 IQ138000 wpa_supplicant[384]: nl80211: kernel reports: Authentication algorithm number required
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0718] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0726] Wi-Fi P2P device controlled by interface wlan0 created
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0752] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0771] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0806] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0847] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0914] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0919] Wi-Fi P2P device controlled by interface wlan1 created
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0942] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0962] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.0998] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 11 23:33:40 IQ138000 NetworkManager[407]: <info>  [1760225620.1041] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:40 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 11 23:33:40 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 11 23:33:40 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 11 23:33:43 IQ138000 init.sh[1322]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 11 23:33:43 IQ138000 init.sh[1337]: In file included from -:16:
Oct 11 23:33:43 IQ138000 init.sh[1337]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:43 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:33:43 IQ138000 init.sh[1322]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 11 23:33:44 IQ138000 init.sh[1322]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 11 23:33:44 IQ138000 init.sh[1396]: In file included from -:11:
Oct 11 23:33:44 IQ138000 init.sh[1396]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:44 IQ138000 init.sh[1322]: ...
Oct 11 23:33:44 IQ138000 init.sh[1412]: In file included from -:11:
Oct 11 23:33:44 IQ138000 init.sh[1412]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:44 IQ138000 init.sh[1322]: failsafe bias enabled
Oct 11 23:33:44 IQ138000 init.sh[1322]: terminators are enabled
Oct 11 23:33:44 IQ138000 init.sh[1322]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 11 23:33:44 IQ138000 init.sh[1431]: In file included from -:24:
Oct 11 23:33:44 IQ138000 init.sh[1431]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:45 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:33:45 IQ138000 init.sh[1322]: ...
Oct 11 23:33:45 IQ138000 init.sh[1446]: In file included from -:24:
Oct 11 23:33:45 IQ138000 init.sh[1446]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:45 IQ138000 init.sh[1322]: failsafe bias enabled
Oct 11 23:33:45 IQ138000 init.sh[1322]: terminators are enabled
Oct 11 23:33:45 IQ138000 init.sh[1322]: Initializing wb74-w1:wb6-wx-1wire.
Oct 11 23:33:45 IQ138000 init.sh[1469]: In file included from -:11:
Oct 11 23:33:45 IQ138000 init.sh[1469]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:45 IQ138000 init.sh[1322]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 11 23:33:45 IQ138000 init.sh[1492]: In file included from -:11:
Oct 11 23:33:45 IQ138000 init.sh[1492]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 11 23:33:45 IQ138000 init.sh[1322]: ...
Oct 11 23:33:45 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 11 23:33:46 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 11 23:33:46 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 11 23:33:46 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 11 23:33:46 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 11 23:33:46 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 11 23:33:46 IQ138000 systemd[1]: Reached target Network.
Oct 11 23:33:46 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 11 23:33:46 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 11 23:33:46 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:33:46 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 11 23:33:46 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 11 23:33:46 IQ138000 lsyncd[1621]: 23:33:46 Normal: --- Startup ---
Oct 11 23:33:46 IQ138000 lsyncd[1621]: 23:33:46 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 11 23:33:46 IQ138000 lsyncd[1621]: journal
Oct 11 23:33:46 IQ138000 lsyncd[1621]: iq_network_manager/iq_network_manager.log
Oct 11 23:33:46 IQ138000 lsyncd[1621]: messages
Oct 11 23:33:46 IQ138000 systemd[1]: Starting Network Time Service...
Oct 11 23:33:46 IQ138000 knxd[1616]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:33:46 IQ138000 knxd[1616]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:33:46 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:33:46 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 11 23:33:46 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 11 23:33:46 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 11 23:33:46 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 11 23:33:46 IQ138000 lsyncd[1635]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 11 23:33:47 IQ138000 lsyncd[1630]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 11 23:33:47 IQ138000 lsyncd[1630]: rsync error: error in rsync protocol data stream (code 12) at io.c(228) [sender=3.2.3]
Oct 11 23:33:47 IQ138000 lsyncd[1621]: 23:33:46 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 11 23:33:47 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 11 23:33:47 IQ138000 ntpd[1631]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 11 23:33:47 IQ138000 ntpd[1631]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 11 23:33:47 IQ138000 ntpd[1631]: ----------------------------------------------------
Oct 11 23:33:47 IQ138000 ntpd[1631]: ntp-4 is maintained by Network Time Foundation,
Oct 11 23:33:47 IQ138000 ntpd[1631]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 11 23:33:47 IQ138000 ntpd[1631]: corporation.  Support and training for ntp-4 are
Oct 11 23:33:47 IQ138000 ntpd[1631]: available at https://www.nwtime.org/support
Oct 11 23:33:47 IQ138000 ntpd[1631]: ----------------------------------------------------
Oct 11 23:33:47 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 11 23:33:47 IQ138000 ntpd[1659]: proto: precision = 1.041 usec (-20)
Oct 11 23:33:47 IQ138000 ntpd[1659]: basedate set to 2020-09-11
Oct 11 23:33:47 IQ138000 ntpd[1659]: gps base set to 2020-09-13 (week 2123)
Oct 11 23:33:47 IQ138000 ntpd[1659]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 11 23:33:47 IQ138000 ntpd[1659]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 11 23:33:47 IQ138000 ntpd[1659]: Listen and drop on 0 v6wildcard [::]:123
Oct 11 23:33:47 IQ138000 ntpd[1659]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 11 23:33:47 IQ138000 ntpd[1659]: Listen normally on 2 lo 127.0.0.1:123
Oct 11 23:33:47 IQ138000 ntpd[1659]: Listen normally on 3 lo [::1]:123
Oct 11 23:33:47 IQ138000 ntpd[1659]: Listening on routing socket on fd #20 for interface updates
Oct 11 23:33:47 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 11 23:33:47 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 11 23:33:47 IQ138000 persist_meter_data.sh[1652]: Error: No such file or directory
Oct 11 23:33:47 IQ138000 wb-knxd-config.sh[1518]: No /dev/ttyKNX found, disabling level2
Oct 11 23:33:47 IQ138000 wb-knxd-config.sh[1518]: Restart knxd
Oct 11 23:33:47 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:33:47 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:33:47 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 11 23:33:47 IQ138000 wb-mqtt-w1[1689]: MQTT broker localhost:1883
Oct 11 23:33:47 IQ138000 wb-mqtt-w1[1689]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:47 IQ138000 wb-mqtt-w1[1689]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:33:47 IQ138000 wb-mqtt-w1[1689]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 11 23:33:47 IQ138000 wb-mqtt-w1[1689]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 11 23:33:47 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:33:47 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:33:47 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 11 23:33:47 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 11 23:33:47 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 11 23:33:47 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 11 23:33:47 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 11 23:33:47 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:47 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:33:47 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 11 23:33:47 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 11 23:33:47 IQ138000 wb-connection-manager[1509]: Connection LegacyWiFi not found, skipping
Oct 11 23:33:47 IQ138000 systemd[1]: Started Network Time Service.
Oct 11 23:33:47 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:47 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 11 23:33:47 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 11 23:33:47 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 11 23:33:48 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 11 23:33:48 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 11 23:33:48 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 11 23:33:48 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 11 23:33:48 IQ138000 ntpd[1659]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:33:48 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 11 23:33:48 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 11 23:33:48 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 11 23:33:48 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 11 23:33:48 IQ138000 wb-connection-manager[1509]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 11 23:33:48 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 11 23:33:48 IQ138000 sshd[1748]: Server listening on 0.0.0.0 port 22.
Oct 11 23:33:48 IQ138000 sshd[1748]: Server listening on :: port 22.
Oct 11 23:33:48 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 11 23:33:48 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 11 23:33:48 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 11 23:33:48 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 11 23:33:48 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 11 23:33:48 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:48 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 11 23:33:48 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:33:48 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 11 23:33:48 IQ138000 systemd[1]: Started Getty on tty1.
Oct 11 23:33:48 IQ138000 vnstatd[1654]: Info: vnStat daemon 2.6 started. (pid:1654 uid:110 gid:117 64-bit)
Oct 11 23:33:48 IQ138000 vnstatd[1654]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 11 23:33:48 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 11 23:33:48 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:33:48 IQ138000 vnstatd[1654]: Info: Interface "ppp0" disabled.
Oct 11 23:33:48 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:33:48 IQ138000 NetworkManager[407]: <error> [1760225628.7471] audit: failed to open auditd socket: Protocol not supported
Oct 11 23:33:48 IQ138000 NetworkManager[407]: <info>  [1760225628.7474] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1509 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 11 23:33:48 IQ138000 wb-connection-manager[1509]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 11 23:33:48 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 11 23:33:48 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 11 23:33:48 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 11 23:33:48 IQ138000 reverse-ssh.sh[1872]: Error: No such file or directory
Oct 11 23:33:48 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:48 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 11 23:33:48 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 11 23:33:49 IQ138000 ntpd[1659]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:33:49 IQ138000 wb-adjust-systime[1874]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 11 23:33:49 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:33:49 IQ138000 wb-adjust-systime[1874]: Drift file is valid (was recently edited)
Oct 11 23:33:49 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 11 23:33:49 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Warning: Error resolving bridge address: Name or service not known.
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.3723] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.3729] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1509 uid=0 result="success"
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.3737] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:49 IQ138000 mosquitto[1909]: 1760225629: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.3849] manager: NetworkManager state is now CONNECTING
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.4037] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.4208] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.4210] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:49 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5038] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:49 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5407] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5428] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5434] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5435] Config: added 'scan_ssid' value '1'
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5437] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5438] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 11 23:33:49 IQ138000 knxd[1927]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:33:49 IQ138000 knxd[1927]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:33:49 IQ138000 NetworkManager[407]: <info>  [1760225629.5610] Config: added 'psk' value '<hidden>'
Oct 11 23:33:49 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 11 23:33:49 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 11 23:33:49 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 11 23:33:49 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 11 23:33:49 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 11 23:33:49 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: MQTT broker localhost:1883
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: Config file /etc/wb-mqtt-db.conf
Oct 11 23:33:50 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 11 23:33:50 IQ138000 ntpd[1659]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:50 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 11 23:33:50 IQ138000 systemd[1]: Started metrics sender.
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Creating tables if necessary
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Create indices if necessary
Oct 11 23:33:50 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] Analyzing data table
Oct 11 23:33:50 IQ138000 wb-mqtt-logs[2011]: MQTT broker localhost:1883
Oct 11 23:33:50 IQ138000 wb-mqtt-logs[2011]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:50 IQ138000 wb-mqtt-logs[2011]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:50 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 11 23:33:50 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 11 23:33:50 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 11 23:33:50 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:33:50 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:33:50 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:50 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:51 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:33:51 IQ138000 wb-mqtt-gpio[1798]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:33:51 IQ138000 wb-mqtt-gpio[1798]: INFO: [gpio driver] Started
Oct 11 23:33:50 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 11 23:33:50 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.665s CPU time.
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:33:51 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 11 23:33:51 IQ138000 ntpd[1659]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2000]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:33:51 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:33:51 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:33:51 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 11 23:33:51 IQ138000 systemd[1]: Started "IQ network manager".
Oct 11 23:33:51 IQ138000 wb-mqtt-confed[1985]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:33:51 IQ138000 wb-mqtt-confed[1985]: INFO: [wbgo_mqtt] confed-IQ138000-1985: MQTT connection established
Oct 11 23:33:51 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2052]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:33:51 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 11 23:33:51 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 11 23:33:51 IQ138000 wb-mqtt-iec104[2150]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 11 23:33:51 IQ138000 wb-mqtt-opcua[2163]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 11 23:33:51 IQ138000 wb-mqtt-knx[2134]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:51 IQ138000 wb-mqtt-knx[2134]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:51 IQ138000 NetworkManager[407]: <info>  [1760225631.8950] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 11 23:33:51 IQ138000 NetworkManager[407]: <info>  [1760225631.8952] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 11 23:33:52 IQ138000 wb-mqtt-mbgate[2024]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 11 23:33:52 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 11 23:33:52 IQ138000 wb-mqtt-opcua[2163]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 11 23:33:52 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 11 23:33:52 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 11 23:33:52 IQ138000 wb-mqtt-iec104[2150]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 11 23:33:52 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 11 23:33:52 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 11 23:33:52 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 11 23:33:52 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:33:52 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 11 23:33:53 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 11 23:33:53 IQ138000 wb-mqtt-logs[2011]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:33:53 IQ138000 wb-mqtt-logs[2011]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:33:53 IQ138000 wb-mqtt-logs[2011]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:33:53 IQ138000 wb-mqtt-logs[2011]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:33:54 IQ138000 wb-mqtt-knx[2134]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:33:54 IQ138000 wb-mqtt-knx[2134]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:33:54 IQ138000 wb-mqtt-knx[2134]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:33:54 IQ138000 wb-mqtt-knx[2134]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:33:54 IQ138000 wb-mqtt-knx[2134]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 11 23:33:55 IQ138000 python3[1962]: No data file found at /tmp/network_status_cache.json
Oct 11 23:33:55 IQ138000 python3[1962]: Connecting to MQTT
Oct 11 23:33:55 IQ138000 python3[1962]: Connected to MQTT
Oct 11 23:33:55 IQ138000 wpa_supplicant[384]: wlan0: Reject scan trigger since one is already pending
Oct 11 23:33:55 IQ138000 python3[1962]: Connection returned result: Connection Accepted.
Oct 11 23:33:56 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2039 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 11 23:33:56 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:33:57 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New virtual device lo 72c3144b-d0c6-46c8-ac38-331a7ebc4bfe /org/freedesktop/NetworkManager/Settings/7
Oct 11 23:33:57 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:33:57 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:New active connection lo 72c3144b-d0c6-46c8-ac38-331a7ebc4bfe /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 11 23:33:57 IQ138000 wb-device-manager[1974]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 11 23:33:57 IQ138000 wb-device-manager[1974]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 11 23:33:57 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:57 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:58 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 11 23:33:58 IQ138000 kernel: dc5ldo: disabling
Oct 11 23:33:58 IQ138000 kernel: dldo4: disabling
Oct 11 23:33:59 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:33:59 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 11 23:33:59 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 11 23:33:59 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 11 23:33:59 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: MQTT broker localhost:1883
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Creating driver MQTT controls
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] ADC worker thread is started
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:33:59 IQ138000 wb-mqtt-adc[3127]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-confed[1985]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-serial[1673]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 11 23:34:00 IQ138000 wb-mqtt-db[1993]: INFO: [sqlite] DB initialization is done
Oct 11 23:34:01 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:01 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:34:01 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:34:01 IQ138000 knxd[3289]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:34:01 IQ138000 knxd[3289]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:34:01 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 11 23:34:01 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:34:01 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 11 23:34:01 IQ138000 wb-gsm[3334]: main: Called from pid 1 (systemd)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 11 23:34:01 IQ138000 wb-gsm[3373]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 11 23:34:01 IQ138000 wb-usb-otg-start.sh[3384]: : wb-usb-otg-start
Oct 11 23:34:01 IQ138000 wb-usb-otg-start.sh[3384]: main: setup_device()
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 11 23:34:01 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 11 23:34:02 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 11 23:34:02 IQ138000 kernel: LUN: removable file: (no medium)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 11 23:34:02 IQ138000 kernel: using random self ethernet address
Oct 11 23:34:02 IQ138000 kernel: using random host ethernet address
Oct 11 23:34:02 IQ138000 wb-usb-otg-start.sh[3384]: main: enabling profile rndis
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 11 23:34:02 IQ138000 wb-gsm[3439]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 11 23:34:02 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 11 23:34:02 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 11 23:34:02 IQ138000 systemd-udevd[3400]: Using default interface naming scheme 'v247'.
Oct 11 23:34:02 IQ138000 NetworkManager[407]: <info>  [1760225642.5463] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 11 23:34:02 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 11 23:34:02 IQ138000 NetworkManager[407]: <info>  [1760225642.7807] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 11 23:34:02 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 11 23:34:02 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 11 23:34:03 IQ138000 wb-gsm[3505]: should_enable: Should enable GSM modem
Oct 11 23:34:03 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 11 23:34:03 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 11 23:34:03 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 11 23:34:04 IQ138000 wb-gsm[3577]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 23:34:04 IQ138000 wb-gsm[3588]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:34:04 IQ138000 wb-gsm[3615]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:34:04 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: DB logger started, go to main loop
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 11 23:34:05 IQ138000 npm[1693]: > zigbee2mqtt@2.1.1 start
Oct 11 23:34:05 IQ138000 npm[1693]: > node index.js
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:34:05 IQ138000 ModemManager[471]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 11 23:34:05 IQ138000 python3[1962]: Выполнение: service wb-connection-manager stop
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is disconnected
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is disconnected
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 11 23:34:05 IQ138000 wb-mqtt-db[1993]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 11 23:34:05 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 11 23:34:06 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:07 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 11 23:34:08 IQ138000 npm[3687]: Starting Zigbee2MQTT without watchdog.
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:34:08 IQ138000 wb-gsm[3999]: mm_off: Modem is already OFF
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 11 23:34:08 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:08 IQ138000 wb-gsm[4069]: main: Called from pid 3507 (wb-gsm-mm)
Oct 11 23:34:08 IQ138000 wb-gsm[4080]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 11 23:34:09 IQ138000 wb-gsm[4104]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 4 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid data size
Oct 11 23:34:09 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:34:10 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:11 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid data size
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:34:12 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 11 23:34:12 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is disconnected
Oct 11 23:34:12 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:12 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:12 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:12 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:12 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:12 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 11 23:34:12 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 11 23:34:12 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 11 23:34:12 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 11 23:34:12 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 11 23:34:12 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:12 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 11 23:34:12 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:34:13 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:34:13 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:34:13 IQ138000 knxd[4469]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 11 23:34:13 IQ138000 knxd[4469]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 11 23:34:13 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 11 23:34:13 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:34:13 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: MQTT broker localhost:1883
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 11 23:34:13 IQ138000 systemd[1]: Started KNX Daemon.
Oct 11 23:34:13 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: w1 thread Started
Oct 11 23:34:13 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 11 23:34:13 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 11 23:34:13 IQ138000 systemd[1]: Started User command preprocessor.
Oct 11 23:34:13 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:34:13 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 11 23:34:13 IQ138000 wb-mqtt-w1[4485]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 11 23:34:13 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 11 23:34:13 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 11 23:34:13 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 11 23:34:13 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.148s CPU time.
Oct 11 23:34:13 IQ138000 python3[1962]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 11 23:34:13 IQ138000 python3[1962]:  
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 11 23:34:13 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <warn>  [1760225654.5260] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <info>  [1760225654.5263] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <info>  [1760225654.5290] manager: NetworkManager state is now DISCONNECTED
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <warn>  [1760225654.5311] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <info>  [1760225654.5326] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 11 23:34:14 IQ138000 wb-mqtt-nm-helper[2039]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <info>  [1760225654.5841] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 11 23:34:14 IQ138000 NetworkManager[407]: <info>  [1760225654.5843] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 11 23:34:14 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:15 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is disconnected
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:16 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:16 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:17 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 NetworkManager[407]: <info>  [1760225658.1068] manager: startup complete
Oct 11 23:34:18 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 11 23:34:18 IQ138000 systemd[1]: Reached target Network is Online.
Oct 11 23:34:18 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 11 23:34:18 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 11 23:34:18 IQ138000 systemd[1]: Starting Health monitor service...
Oct 11 23:34:18 IQ138000 systemd[1]: Stopping User command handler service...
Oct 11 23:34:18 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:34:18 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 11 23:34:18 IQ138000 systemd[1]: Stopped User command handler service.
Oct 11 23:34:18 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 11 23:34:18 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 11 23:34:18 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 11 23:34:18 IQ138000 systemd[1]: Started Health monitor service.
Oct 11 23:34:18 IQ138000 python3[1962]: Выполнение: mmcli -m wbc
Oct 11 23:34:18 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 11 23:34:18 IQ138000 systemd[1]: Starting User command handler service...
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: malformed response: invalid data size
Oct 11 23:34:18 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 11 23:34:18 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 11 23:34:18 IQ138000 systemd[1]: Started User command handler service.
Oct 11 23:34:18 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 11 23:34:18 IQ138000 python3[1962]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 11 23:34:18 IQ138000 wb-rules[4561]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-rules[4561]: INFO: driver is created
Oct 11 23:34:18 IQ138000 wb-rules[4561]: INFO: [wbgo_mqtt] rules-IQ138000-4561: MQTT connection established
Oct 11 23:34:18 IQ138000 wb-rules[4561]: INFO: driver loop is started
Oct 11 23:34:18 IQ138000 wb-rules[4561]: INFO: wait for driver to become ready
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:18 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is disconnected
Oct 11 23:34:19 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 11 23:34:19 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 11 23:34:19 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 11 23:34:19 IQ138000 watchdog[4643]: starting daemon (5.16):
Oct 11 23:34:19 IQ138000 watchdog[4643]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 11 23:34:19 IQ138000 watchdog[4643]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 11 23:34:19 IQ138000 watchdog[4643]:  ping: no machine to check
Oct 11 23:34:19 IQ138000 watchdog[4643]:  file: no file to check
Oct 11 23:34:19 IQ138000 watchdog[4643]:  pidfile: /var/run/sshd.pid
Oct 11 23:34:19 IQ138000 systemd[1]: Started watchdog daemon.
Oct 11 23:34:19 IQ138000 watchdog[4643]:  interface: no interface to check
Oct 11 23:34:19 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 11 23:34:19 IQ138000 watchdog[4643]:  temperature: no sensors to check
Oct 11 23:34:19 IQ138000 watchdog[4643]:  no test binary files
Oct 11 23:34:19 IQ138000 watchdog[4643]:  no repair binary files
Oct 11 23:34:19 IQ138000 watchdog[4643]:  error retry time-out = 30 seconds
Oct 11 23:34:19 IQ138000 watchdog[4643]:  repair attempts = 1
Oct 11 23:34:19 IQ138000 watchdog[4643]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 11 23:34:19 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 watchdog[4643]: watchdog now set to 120 seconds
Oct 11 23:34:19 IQ138000 watchdog[4643]: hardware watchdog identity: WBEC WDT
Oct 11 23:34:19 IQ138000 python3[1962]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 11 23:34:19 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 11 23:34:19 IQ138000 systemd[1]: Startup finished in 3.802s (kernel) + 51.400s (userspace) = 55.203s.
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 11 23:34:19 IQ138000 wb-mqtt-serial[1673]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
-- Boot 4adca2b331974e919b7e19555ff968b2 --
Oct 11 23:54:58 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:54:58 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:54:58 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:54:58 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:54:58 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:54:58 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:54:58 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:54:58 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:54:58 IQ138000 kernel: Zone ranges:
Oct 11 23:54:58 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:54:58 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:54:58 IQ138000 kernel: Movable zone start for each node
Oct 11 23:54:58 IQ138000 kernel: Early memory node ranges
Oct 11 23:54:58 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:54:58 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:54:58 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:54:58 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:54:58 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:54:58 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:54:58 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:54:58 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:54:58 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:54:58 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:54:58 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:54:58 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:54:58 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:54:58 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:54:58 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:54:58 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:54:58 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:54:58 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:54:58 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:54:58 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:54:58 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:54:58 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:54:58 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:54:58 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:54:58 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:54:58 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:54:58 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:54:58 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:54:58 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:54:58 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:54:58 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:54:58 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:54:58 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:54:58 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:54:58 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:54:58 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:54:58 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:54:58 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:54:58 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:54:58 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:54:58 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:54:58 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:54:58 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:54:58 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:54:58 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:54:58 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:54:58 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:54:58 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:54:58 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:54:58 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:54:58 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:54:58 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:54:58 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:54:58 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:54:58 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:54:58 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:54:58 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:54:58 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:54:58 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:54:58 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:54:58 IQ138000 kernel: No ATAGs?
Oct 11 23:54:58 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:54:58 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:54:58 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:54:58 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:54:58 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:54:58 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:54:58 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:54:58 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:54:58 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:54:58 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:54:58 IQ138000 kernel: PTP clock support registered
Oct 11 23:54:58 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:54:58 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:54:58 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:54:58 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:54:58 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:54:58 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:54:58 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:54:58 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:54:58 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:54:58 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:54:58 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:54:58 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:54:58 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:54:58 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:54:58 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:54:58 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:54:58 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:54:58 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:54:58 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:54:58 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:54:58 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:54:58 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:54:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:54:58 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:54:58 IQ138000 kernel: brd: module loaded
Oct 11 23:54:58 IQ138000 kernel: loop: module loaded
Oct 11 23:54:58 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:54:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:54:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:54:58 IQ138000 kernel: CAN device driver interface
Oct 11 23:54:58 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:54:58 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:54:58 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:54:58 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:54:58 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:54:58 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:54:58 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:54:58 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:54:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:54:58 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:54:58 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:54:58 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:54:58 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:54:58 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:54:58 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:54:58 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:54:58 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:54:58 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:54:58 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:54:58 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:54:58 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:54:58 IQ138000 kernel: can: controller area network core
Oct 11 23:54:58 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:54:58 IQ138000 kernel: can: raw protocol
Oct 11 23:54:58 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:54:58 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:54:58 IQ138000 kernel: can: SAE J1939
Oct 11 23:54:58 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:54:58 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:54:58 IQ138000 kernel: registered taskstats version 1
Oct 11 23:54:58 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:54:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:54:58 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:54:58 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:54:58 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:54:58 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:54:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:54:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:54:58 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:54:54 UTC (1760226894)
Oct 11 23:54:58 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:54:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:54:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:54:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:54:58 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:54:58 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:54:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:54:58 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:54:58 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:54:58 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:54:58 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:54:58 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:54:58 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:54:58 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:54:58 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: random: fast init done
Oct 11 23:54:58 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:54:58 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:54:58 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:54:58 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:54:58 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:54:58 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:54:58 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:54:58 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:54:58 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:54:58 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:54:58 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:54:58 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:54:58 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:54:58 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:54:58 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:54:58 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:54:58 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:54:58 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:54:58 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:54:58 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:54:58 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:54:58 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:54:58 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:54:58 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:54:58 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:54:58 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:54:58 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:54:58 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:54:58 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:54:58 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:54:58 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:54:58 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:54:58 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:54:58 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:54:58 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:54:58 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:54:58 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:54:58 IQ138000 kernel: of_cfs_init
Oct 11 23:54:58 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:54:58 IQ138000 kernel: ALSA device list:
Oct 11 23:54:58 IQ138000 kernel:   No soundcards found.
Oct 11 23:54:58 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:54:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:54:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:54:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:54:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:54:58 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:54:58 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:54:58 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:54:58 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:54:58 IQ138000 kernel:   with arguments:
Oct 11 23:54:58 IQ138000 kernel:     /sbin/init
Oct 11 23:54:58 IQ138000 kernel:   with environment:
Oct 11 23:54:58 IQ138000 kernel:     HOME=/
Oct 11 23:54:58 IQ138000 kernel:     TERM=linux
Oct 11 23:54:58 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:54:58 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:54:58 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:54:58 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:54:58 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:54:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:54:58 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:54:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:54:58 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:54:58 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:54:58 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:54:58 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:54:58 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:54:58 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:54:58 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:54:58 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:54:58 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:54:58 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:54:58 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:54:58 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:54:58 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:54:58 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:54:58 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:54:58 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:54:58 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:54:58 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:54:58 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:54:58 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:54:58 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:54:58 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:54:58 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:54:58 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:54:58 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:54:58 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:54:58 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:54:58 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:54:58 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:54:58 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:54:58 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:54:58 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:54:58 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:54:58 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:54:58 IQ138000 systemd-journald[141]: Journal started
Oct 11 23:54:58 IQ138000 systemd-journald[141]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:54:58 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:54:58 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:54:58 IQ138000 systemd-fsck[144]: rootfs1: clean, 37044/131072 files, 278739/524288 blocks
Oct 11 23:54:58 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:54:58 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:54:58 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:54:58 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:54:58 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:54:58 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:54:58 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:54:58 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:54:58 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:54:59 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:54:59 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:54:59 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:54:59 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:54:59 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:54:59 IQ138000 systemd-random-seed[152]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:54:59 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:54:59 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:54:59 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:54:59 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:54:59 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:54:59 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:54:59 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:54:59 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:54:59 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:54:59 IQ138000 systemd-udevd[157]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:54:59 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:54:59 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:55:00 IQ138000 systemd-udevd[164]: Using default interface naming scheme 'v247'.
Oct 11 23:55:00 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:55:00 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:55:00 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:55:00 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:55:00 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:55:00 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:55:00 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:55:00 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:55:00 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:55:00 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:55:00 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:55:00 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:55:00 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:55:00 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:55:00 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 23:55:00 IQ138000 systemd-udevd[162]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:55:00 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:55:00 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:55:00 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:55:00 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:55:00 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:55:00 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:55:00 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:55:01 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:55:01 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:55:01 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:55:01 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:55:01 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:55:01 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:55:01 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:55:01 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:55:01 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:55:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:55:01 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:55:01 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:55:01 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 23:55:01 IQ138000 systemd-udevd[165]: Using default interface naming scheme 'v247'.
Oct 11 23:55:01 IQ138000 systemd-udevd[165]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:55:01 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:55:01 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:55:01 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:55:01 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:55:01 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:55:01 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:55:01 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:55:01 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:55:01 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:55:01 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:55:01 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:55:01 IQ138000 systemd-fsck[214]: data: recovering journal
Oct 11 23:55:01 IQ138000 systemd-fsck[214]: data: clean, 16469/328656 files, 374220/1313536 blocks
Oct 11 23:55:01 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:55:01 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:55:01 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:55:01 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:55:01 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:55:01 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:55:01 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:55:01 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:55:02 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:55:02 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:55:02 IQ138000 systemd-journald[141]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 47.334ms for 461 entries.
-- Boot 878fa5ba68ce408ca07f4e5370168c88 --
Oct 11 23:55:31 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:55:31 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:55:31 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:55:31 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:55:31 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:55:31 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:55:31 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:55:31 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:55:31 IQ138000 kernel: Zone ranges:
Oct 11 23:55:31 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:55:31 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:55:31 IQ138000 kernel: Movable zone start for each node
Oct 11 23:55:31 IQ138000 kernel: Early memory node ranges
Oct 11 23:55:31 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:55:31 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:55:31 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:55:31 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:55:31 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:55:31 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:55:31 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:55:31 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:55:31 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:55:31 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:55:31 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:55:31 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:55:31 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:55:31 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:55:31 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:55:31 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:55:31 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:55:31 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:55:31 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:55:31 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:55:31 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:55:31 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:55:31 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:55:31 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:55:31 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:55:31 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:55:31 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:55:31 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:55:31 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:55:31 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:55:31 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:55:31 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:55:31 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:55:31 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:55:31 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:55:31 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:55:31 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:55:31 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:55:31 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:55:31 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:55:31 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:55:31 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:55:31 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:55:31 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:55:31 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:55:31 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:55:31 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:55:31 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:55:31 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:55:31 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:55:31 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:55:31 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:55:31 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:55:31 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:55:31 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:55:31 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:55:31 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:55:31 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:55:31 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:55:31 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:55:31 IQ138000 kernel: No ATAGs?
Oct 11 23:55:31 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:55:31 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:55:31 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:55:31 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:55:31 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:55:31 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:55:31 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:55:31 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:55:31 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:55:31 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:55:31 IQ138000 kernel: PTP clock support registered
Oct 11 23:55:31 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:55:31 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:55:31 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:55:31 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:55:31 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:55:31 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:55:31 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:55:31 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:55:31 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:55:31 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:55:31 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:55:31 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:55:31 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:55:31 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:55:31 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:55:31 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:55:31 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:55:31 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:55:31 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:55:31 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:55:31 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:55:31 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:55:31 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:55:31 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:55:31 IQ138000 kernel: brd: module loaded
Oct 11 23:55:31 IQ138000 kernel: loop: module loaded
Oct 11 23:55:31 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:55:31 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:55:31 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:55:31 IQ138000 kernel: CAN device driver interface
Oct 11 23:55:31 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:55:31 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:55:31 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:55:31 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:55:31 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:55:31 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:55:31 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:55:31 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:55:31 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:55:31 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:55:31 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:55:31 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:55:31 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:55:31 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:55:31 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:55:31 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:55:31 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:55:31 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:55:31 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:55:31 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:55:31 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:55:31 IQ138000 kernel: can: controller area network core
Oct 11 23:55:31 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:55:31 IQ138000 kernel: can: raw protocol
Oct 11 23:55:31 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:55:31 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:55:31 IQ138000 kernel: can: SAE J1939
Oct 11 23:55:31 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:55:31 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:55:31 IQ138000 kernel: registered taskstats version 1
Oct 11 23:55:31 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:55:31 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:55:31 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:55:31 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:55:31 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:55:31 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:55:31 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:55:31 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:55:31 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:55:27 UTC (1760226927)
Oct 11 23:55:31 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:55:31 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:55:31 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:55:31 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:55:31 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:55:31 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:55:31 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:55:31 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:55:31 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:55:31 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:55:31 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:55:31 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:55:31 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:55:31 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:55:31 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: random: fast init done
Oct 11 23:55:31 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:55:31 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:55:31 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:55:31 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:55:31 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:55:31 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:55:31 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:55:31 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:55:31 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:55:31 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:55:31 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:55:31 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:55:31 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:55:31 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:55:31 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:55:31 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:55:31 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:55:31 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:55:31 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:55:31 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:55:31 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:55:31 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:55:31 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:55:31 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:55:31 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:55:31 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:55:31 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:55:31 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:55:31 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:55:31 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:55:31 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:55:31 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:55:31 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:55:31 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:55:31 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:55:31 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:55:31 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:55:31 IQ138000 kernel: of_cfs_init
Oct 11 23:55:31 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:55:31 IQ138000 kernel: ALSA device list:
Oct 11 23:55:31 IQ138000 kernel:   No soundcards found.
Oct 11 23:55:31 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:55:31 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:55:31 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:55:31 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:55:31 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:55:31 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:55:31 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:55:31 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:55:31 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:55:31 IQ138000 kernel:   with arguments:
Oct 11 23:55:31 IQ138000 kernel:     /sbin/init
Oct 11 23:55:31 IQ138000 kernel:   with environment:
Oct 11 23:55:31 IQ138000 kernel:     HOME=/
Oct 11 23:55:31 IQ138000 kernel:     TERM=linux
Oct 11 23:55:31 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:55:31 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:55:31 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:55:31 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:55:31 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:55:31 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:55:31 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:55:31 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:55:31 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:55:31 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:55:31 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:55:31 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:55:31 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:55:31 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:55:31 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:55:31 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:55:31 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:55:31 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:55:31 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:55:31 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:55:31 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:55:31 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:55:31 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:55:31 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:55:31 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:55:31 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:55:31 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:55:31 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:55:31 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:55:31 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:55:31 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:55:31 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:55:31 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:55:31 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:55:31 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:55:31 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:55:31 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:55:31 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:55:31 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:55:31 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:55:31 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:55:31 IQ138000 systemd-journald[140]: Journal started
Oct 11 23:55:31 IQ138000 systemd-journald[140]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:55:31 IQ138000 systemd-fsck[143]: rootfs1: clean, 37045/131072 files, 278742/524288 blocks
Oct 11 23:55:31 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:55:31 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:55:31 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:55:31 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:55:31 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:55:31 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:55:31 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:55:31 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:55:31 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:55:32 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:55:32 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:55:32 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:55:32 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:55:32 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:55:32 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:55:32 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:55:32 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:55:32 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:55:32 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:55:32 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:55:32 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:55:32 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:55:32 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:55:32 IQ138000 systemd-udevd[158]: Using default interface naming scheme 'v247'.
Oct 11 23:55:33 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:55:33 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:55:33 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:55:33 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:55:33 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:55:33 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:55:33 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:55:33 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:55:33 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:55:33 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:55:33 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 11 23:55:33 IQ138000 systemd-udevd[166]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:55:33 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:55:33 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:55:33 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:55:33 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:55:33 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:55:33 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:55:33 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:55:33 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:55:33 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:55:33 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:55:33 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:55:33 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:55:33 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:55:33 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:55:34 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:55:34 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:55:34 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:55:34 IQ138000 systemd-fsck[203]: data: recovering journal
Oct 11 23:55:34 IQ138000 systemd-fsck[203]: data: clean, 16469/328656 files, 374220/1313536 blocks
Oct 11 23:55:34 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:55:34 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:55:34 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:55:34 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:55:34 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:55:34 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:55:34 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:55:34 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:55:34 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:55:34 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:55:34 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:55:34 IQ138000 systemd-udevd[159]: Using default interface naming scheme 'v247'.
Oct 11 23:55:34 IQ138000 systemd-udevd[162]: Using default interface naming scheme 'v247'.
Oct 11 23:55:34 IQ138000 systemd-udevd[162]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:55:34 IQ138000 systemd-udevd[159]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:55:34 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:55:34 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:55:34 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:55:34 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:55:34 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:55:34 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:55:34 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:55:34 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:55:34 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:55:34 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:55:34 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:55:34 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:55:34 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:55:34 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:55:34 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:55:34 IQ138000 systemd-journald[140]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 45.450ms for 461 entries.
-- Boot b6e63534994f473b96ab1848722d3ac4 --
Oct 11 23:56:04 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 11 23:56:04 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 11 23:56:04 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 11 23:56:04 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 11 23:56:04 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 11 23:56:04 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 11 23:56:04 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 11 23:56:04 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 11 23:56:04 IQ138000 kernel: Zone ranges:
Oct 11 23:56:04 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 11 23:56:04 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 11 23:56:04 IQ138000 kernel: Movable zone start for each node
Oct 11 23:56:04 IQ138000 kernel: Early memory node ranges
Oct 11 23:56:04 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:56:04 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 11 23:56:04 IQ138000 kernel: On node 0 totalpages: 262144
Oct 11 23:56:04 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 11 23:56:04 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 11 23:56:04 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 11 23:56:04 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 11 23:56:04 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 11 23:56:04 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 11 23:56:04 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 11 23:56:04 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 11 23:56:04 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 11 23:56:04 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 11 23:56:04 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 11 23:56:04 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 11 23:56:04 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 11 23:56:04 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 11 23:56:04 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 11 23:56:04 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 11 23:56:04 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 11 23:56:04 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 11 23:56:04 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 11 23:56:04 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 11 23:56:04 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 11 23:56:04 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 11 23:56:04 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 11 23:56:04 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 11 23:56:04 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 11 23:56:04 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 11 23:56:04 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 11 23:56:04 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 11 23:56:04 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 11 23:56:04 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 11 23:56:04 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 11 23:56:04 IQ138000 kernel: Console: colour dummy device 80x30
Oct 11 23:56:04 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 11 23:56:04 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 11 23:56:04 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 11 23:56:04 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 11 23:56:04 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 11 23:56:04 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 11 23:56:04 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 11 23:56:04 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 11 23:56:04 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 11 23:56:04 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 11 23:56:04 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 11 23:56:04 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 11 23:56:04 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 11 23:56:04 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 11 23:56:04 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 11 23:56:04 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 11 23:56:04 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 11 23:56:04 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 11 23:56:04 IQ138000 kernel: devtmpfs: initialized
Oct 11 23:56:04 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 11 23:56:04 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 11 23:56:04 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 11 23:56:04 IQ138000 kernel: NET: Registered protocol family 16
Oct 11 23:56:04 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 11 23:56:04 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 11 23:56:04 IQ138000 kernel: No ATAGs?
Oct 11 23:56:04 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 11 23:56:04 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 11 23:56:04 IQ138000 kernel: SCSI subsystem initialized
Oct 11 23:56:04 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 11 23:56:04 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 11 23:56:04 IQ138000 kernel: usbcore: registered new device driver usb
Oct 11 23:56:04 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 11 23:56:04 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 11 23:56:04 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 11 23:56:04 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 11 23:56:04 IQ138000 kernel: PTP clock support registered
Oct 11 23:56:04 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 11 23:56:04 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 11 23:56:04 IQ138000 kernel: NET: Registered protocol family 2
Oct 11 23:56:04 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 11 23:56:04 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 11 23:56:04 IQ138000 kernel: NET: Registered protocol family 1
Oct 11 23:56:04 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 11 23:56:04 IQ138000 kernel: RPC: Registered udp transport module.
Oct 11 23:56:04 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 11 23:56:04 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 11 23:56:04 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 11 23:56:04 IQ138000 kernel: Initialise system trusted keyrings
Oct 11 23:56:04 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 11 23:56:04 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 11 23:56:04 IQ138000 kernel: Key type id_resolver registered
Oct 11 23:56:04 IQ138000 kernel: Key type id_legacy registered
Oct 11 23:56:04 IQ138000 kernel: Key type asymmetric registered
Oct 11 23:56:04 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 11 23:56:04 IQ138000 kernel: bounce: pool size: 64 pages
Oct 11 23:56:04 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 11 23:56:04 IQ138000 kernel: io scheduler mq-deadline registered
Oct 11 23:56:04 IQ138000 kernel: io scheduler kyber registered
Oct 11 23:56:04 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:56:04 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 11 23:56:04 IQ138000 kernel: brd: module loaded
Oct 11 23:56:04 IQ138000 kernel: loop: module loaded
Oct 11 23:56:04 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 11 23:56:04 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:56:04 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:56:04 IQ138000 kernel: CAN device driver interface
Oct 11 23:56:04 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 11 23:56:04 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 11 23:56:04 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 11 23:56:04 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 11 23:56:04 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 11 23:56:04 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 11 23:56:04 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 11 23:56:04 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 11 23:56:04 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 11 23:56:04 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 11 23:56:04 IQ138000 kernel: i2c /dev entries driver
Oct 11 23:56:04 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 11 23:56:04 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 11 23:56:04 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 11 23:56:04 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 11 23:56:04 IQ138000 kernel: usbhid: USB HID core driver
Oct 11 23:56:04 IQ138000 kernel: Initializing XFRM netlink socket
Oct 11 23:56:04 IQ138000 kernel: NET: Registered protocol family 10
Oct 11 23:56:04 IQ138000 kernel: Segment Routing with IPv6
Oct 11 23:56:04 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 11 23:56:04 IQ138000 kernel: NET: Registered protocol family 17
Oct 11 23:56:04 IQ138000 kernel: can: controller area network core
Oct 11 23:56:04 IQ138000 kernel: NET: Registered protocol family 29
Oct 11 23:56:04 IQ138000 kernel: can: raw protocol
Oct 11 23:56:04 IQ138000 kernel: can: broadcast manager protocol
Oct 11 23:56:04 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 11 23:56:04 IQ138000 kernel: can: SAE J1939
Oct 11 23:56:04 IQ138000 kernel: Key type dns_resolver registered
Oct 11 23:56:04 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 11 23:56:04 IQ138000 kernel: registered taskstats version 1
Oct 11 23:56:04 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 11 23:56:04 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 11 23:56:04 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 11 23:56:04 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:56:04 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 11 23:56:04 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 11 23:56:04 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 11 23:56:04 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 11 23:56:04 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-11T23:56:00 UTC (1760226960)
Oct 11 23:56:04 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 11 23:56:04 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:56:04 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 11 23:56:04 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 11 23:56:04 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 11 23:56:04 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 11 23:56:04 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 11 23:56:04 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 11 23:56:04 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 11 23:56:04 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 11 23:56:04 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 11 23:56:04 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 11 23:56:04 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 11 23:56:04 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 11 23:56:04 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: random: fast init done
Oct 11 23:56:04 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 11 23:56:04 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 11 23:56:04 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 11 23:56:04 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 11 23:56:04 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 11 23:56:04 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 11 23:56:04 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 11 23:56:04 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 11 23:56:04 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 11 23:56:04 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 11 23:56:04 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 11 23:56:04 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 11 23:56:04 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 11 23:56:04 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 11 23:56:04 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 11 23:56:04 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 11 23:56:04 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 11 23:56:04 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 11 23:56:04 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 11 23:56:04 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 11 23:56:04 IQ138000 kernel: libphy: stmmac: probed
Oct 11 23:56:04 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:56:04 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 11 23:56:04 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:56:04 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 11 23:56:04 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 11 23:56:04 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 11 23:56:04 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 11 23:56:04 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 11 23:56:04 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 11 23:56:04 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 11 23:56:04 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 11 23:56:04 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 11 23:56:04 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 11 23:56:04 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 11 23:56:04 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 11 23:56:04 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 11 23:56:04 IQ138000 kernel: of_cfs_init
Oct 11 23:56:04 IQ138000 kernel: of_cfs_init: OK
Oct 11 23:56:04 IQ138000 kernel: ALSA device list:
Oct 11 23:56:04 IQ138000 kernel:   No soundcards found.
Oct 11 23:56:04 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 11 23:56:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 11 23:56:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 11 23:56:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 11 23:56:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 11 23:56:04 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 11 23:56:04 IQ138000 kernel: devtmpfs: mounted
Oct 11 23:56:04 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 11 23:56:04 IQ138000 kernel: Run /sbin/init as init process
Oct 11 23:56:04 IQ138000 kernel:   with arguments:
Oct 11 23:56:04 IQ138000 kernel:     /sbin/init
Oct 11 23:56:04 IQ138000 kernel:   with environment:
Oct 11 23:56:04 IQ138000 kernel:     HOME=/
Oct 11 23:56:04 IQ138000 kernel:     TERM=linux
Oct 11 23:56:04 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 11 23:56:04 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 11 23:56:04 IQ138000 systemd[1]: Detected architecture arm.
Oct 11 23:56:04 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 11 23:56:04 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 11 23:56:04 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:56:04 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 11 23:56:04 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:56:04 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 11 23:56:04 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 11 23:56:04 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 11 23:56:04 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 11 23:56:04 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 11 23:56:04 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 11 23:56:04 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 11 23:56:04 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:56:04 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 11 23:56:04 IQ138000 systemd[1]: Reached target Paths.
Oct 11 23:56:04 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 11 23:56:04 IQ138000 systemd[1]: Reached target Slices.
Oct 11 23:56:04 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 11 23:56:04 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 11 23:56:04 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 11 23:56:04 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 11 23:56:04 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 11 23:56:04 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 11 23:56:04 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 11 23:56:04 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:56:04 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 11 23:56:04 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 11 23:56:04 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 11 23:56:04 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 11 23:56:04 IQ138000 kernel: fuse: init (API version 7.32)
Oct 11 23:56:04 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:56:04 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Journal Service...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 11 23:56:04 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 11 23:56:04 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 11 23:56:04 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 11 23:56:04 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 11 23:56:04 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 11 23:56:04 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 11 23:56:04 IQ138000 systemd-journald[138]: Journal started
Oct 11 23:56:04 IQ138000 systemd-journald[138]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 11 23:56:04 IQ138000 systemd-fsck[142]: rootfs1: clean, 37037/131072 files, 278736/524288 blocks
Oct 11 23:56:04 IQ138000 systemd[1]: Started Journal Service.
Oct 11 23:56:04 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 11 23:56:04 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 11 23:56:04 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 11 23:56:04 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 11 23:56:04 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 11 23:56:04 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:56:04 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:56:04 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 11 23:56:05 IQ138000 systemd-random-seed[150]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 11 23:56:05 IQ138000 systemd[1]: Starting Create System Users...
Oct 11 23:56:05 IQ138000 systemd[1]: Finished Create System Users.
Oct 11 23:56:05 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 11 23:56:05 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 11 23:56:05 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 11 23:56:05 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 11 23:56:05 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 11 23:56:05 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 11 23:56:05 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 11 23:56:05 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 11 23:56:05 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 11 23:56:05 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 11 23:56:05 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 11 23:56:06 IQ138000 systemd-udevd[160]: Using default interface naming scheme 'v247'.
Oct 11 23:56:06 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 11 23:56:06 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 11 23:56:06 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 11 23:56:06 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 11 23:56:06 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 11 23:56:06 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 11 23:56:06 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 11 23:56:06 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 11 23:56:06 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 11 23:56:06 IQ138000 kernel: NET: Registered protocol family 31
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 11 23:56:06 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 11 23:56:06 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 11 23:56:06 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 11 23:56:06 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 11 23:56:06 IQ138000 systemd-udevd[157]: eth1: Failed to query device driver: Device or resource busy
Oct 11 23:56:06 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 11 23:56:06 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 11 23:56:06 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 11 23:56:06 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 11 23:56:06 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 11 23:56:06 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 11 23:56:06 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 11 23:56:06 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 11 23:56:06 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 11 23:56:07 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 11 23:56:07 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 11 23:56:07 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 11 23:56:07 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 11 23:56:07 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 11 23:56:07 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 11 23:56:07 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 11 23:56:07 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 11 23:56:07 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 11 23:56:07 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 11 23:56:07 IQ138000 systemd-udevd[157]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:56:07 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 11 23:56:07 IQ138000 systemd-udevd[160]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 11 23:56:07 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 11 23:56:07 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 11 23:56:07 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 11 23:56:07 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 11 23:56:07 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 11 23:56:07 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 11 23:56:07 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 11 23:56:07 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 11 23:56:07 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 11 23:56:07 IQ138000 systemd[1]: Reached target Swap.
Oct 11 23:56:07 IQ138000 systemd-fsck[216]: data: recovering journal
Oct 11 23:56:07 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 11 23:56:07 IQ138000 systemd-fsck[216]: data: clean, 16469/328656 files, 374220/1313536 blocks
Oct 11 23:56:07 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 11 23:56:07 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 11 23:56:07 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 11 23:56:07 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 11 23:56:07 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 11 23:56:07 IQ138000 systemd[1]: Mounting /var/log...
Oct 11 23:56:07 IQ138000 systemd[1]: Mounted /var/log.
Oct 11 23:56:07 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 11 23:56:07 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 11 23:56:07 IQ138000 systemd-journald[138]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.620ms for 459 entries.
-- Boot 1462ecf2b96943daa5d61fe8f05c3e1c --
Oct 17 13:59:10 IQ138000 kernel: Booting Linux on physical CPU 0x0
Oct 17 13:59:10 IQ138000 kernel: Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025
Oct 17 13:59:10 IQ138000 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Oct 17 13:59:10 IQ138000 kernel: CPU: div instructions available: patching division code
Oct 17 13:59:10 IQ138000 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Oct 17 13:59:10 IQ138000 kernel: OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i)
Oct 17 13:59:10 IQ138000 kernel: Memory policy: Data cache writealloc
Oct 17 13:59:10 IQ138000 kernel: cma: Reserved 16 MiB at 0x7ec00000
Oct 17 13:59:10 IQ138000 kernel: Zone ranges:
Oct 17 13:59:10 IQ138000 kernel:   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Oct 17 13:59:10 IQ138000 kernel:   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Oct 17 13:59:10 IQ138000 kernel: Movable zone start for each node
Oct 17 13:59:10 IQ138000 kernel: Early memory node ranges
Oct 17 13:59:10 IQ138000 kernel:   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Oct 17 13:59:10 IQ138000 kernel: Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Oct 17 13:59:10 IQ138000 kernel: On node 0 totalpages: 262144
Oct 17 13:59:10 IQ138000 kernel:   Normal zone: 1728 pages used for memmap
Oct 17 13:59:10 IQ138000 kernel:   Normal zone: 0 pages reserved
Oct 17 13:59:10 IQ138000 kernel:   Normal zone: 196608 pages, LIFO batch:63
Oct 17 13:59:10 IQ138000 kernel:   HighMem zone: 65536 pages, LIFO batch:15
Oct 17 13:59:10 IQ138000 kernel: psci: probing for conduit method from DT.
Oct 17 13:59:10 IQ138000 kernel: psci: Using PSCI v0.1 Function IDs from DT
Oct 17 13:59:10 IQ138000 kernel: percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920
Oct 17 13:59:10 IQ138000 kernel: pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096
Oct 17 13:59:10 IQ138000 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Oct 17 13:59:10 IQ138000 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 260416
Oct 17 13:59:10 IQ138000 kernel: Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro
Oct 17 13:59:10 IQ138000 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 17 13:59:10 IQ138000 kernel: Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem)
Oct 17 13:59:10 IQ138000 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 17 13:59:10 IQ138000 kernel: ftrace: allocating 31979 entries in 63 pages
Oct 17 13:59:10 IQ138000 kernel: ftrace: allocated 63 pages with 6 groups
Oct 17 13:59:10 IQ138000 kernel: rcu: Hierarchical RCU implementation.
Oct 17 13:59:10 IQ138000 kernel: rcu:         RCU event tracing is enabled.
Oct 17 13:59:10 IQ138000 kernel: rcu:         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Oct 17 13:59:10 IQ138000 kernel:         Rude variant of Tasks RCU enabled.
Oct 17 13:59:10 IQ138000 kernel:         Tracing variant of Tasks RCU enabled.
Oct 17 13:59:10 IQ138000 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Oct 17 13:59:10 IQ138000 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Oct 17 13:59:10 IQ138000 kernel: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Oct 17 13:59:10 IQ138000 kernel: GIC: Using split EOI/Deactivate mode
Oct 17 13:59:10 IQ138000 kernel: random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0
Oct 17 13:59:10 IQ138000 kernel: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Oct 17 13:59:10 IQ138000 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Oct 17 13:59:10 IQ138000 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Oct 17 13:59:10 IQ138000 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Oct 17 13:59:10 IQ138000 kernel: Switching to timer-based delay loop, resolution 41ns
Oct 17 13:59:10 IQ138000 kernel: Console: colour dummy device 80x30
Oct 17 13:59:10 IQ138000 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Oct 17 13:59:10 IQ138000 kernel: pid_max: default: 32768 minimum: 301
Oct 17 13:59:10 IQ138000 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: CPU: Testing write buffer coherency: ok
Oct 17 13:59:10 IQ138000 kernel: /cpus/cpu@0 missing clock-frequency property
Oct 17 13:59:10 IQ138000 kernel: /cpus/cpu@1 missing clock-frequency property
Oct 17 13:59:10 IQ138000 kernel: /cpus/cpu@2 missing clock-frequency property
Oct 17 13:59:10 IQ138000 kernel: /cpus/cpu@3 missing clock-frequency property
Oct 17 13:59:10 IQ138000 kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Oct 17 13:59:10 IQ138000 kernel: Setting up static identity map for 0x40100000 - 0x40100060
Oct 17 13:59:10 IQ138000 kernel: rcu: Hierarchical SRCU implementation.
Oct 17 13:59:10 IQ138000 kernel: smp: Bringing up secondary CPUs ...
Oct 17 13:59:10 IQ138000 kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Oct 17 13:59:10 IQ138000 kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Oct 17 13:59:10 IQ138000 kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Oct 17 13:59:10 IQ138000 kernel: smp: Brought up 1 node, 4 CPUs
Oct 17 13:59:10 IQ138000 kernel: SMP: Total of 4 processors activated (192.00 BogoMIPS).
Oct 17 13:59:10 IQ138000 kernel: CPU: All CPU(s) started in HYP mode.
Oct 17 13:59:10 IQ138000 kernel: CPU: Virtualization extensions available.
Oct 17 13:59:10 IQ138000 kernel: devtmpfs: initialized
Oct 17 13:59:10 IQ138000 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Oct 17 13:59:10 IQ138000 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 17 13:59:10 IQ138000 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: pinctrl core: initialized pinctrl subsystem
Oct 17 13:59:10 IQ138000 kernel: NET: Registered protocol family 16
Oct 17 13:59:10 IQ138000 kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Oct 17 13:59:10 IQ138000 kernel: thermal_sys: Registered thermal governor 'step_wise'
Oct 17 13:59:10 IQ138000 kernel: No ATAGs?
Oct 17 13:59:10 IQ138000 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Oct 17 13:59:10 IQ138000 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes.
Oct 17 13:59:10 IQ138000 kernel: SCSI subsystem initialized
Oct 17 13:59:10 IQ138000 kernel: usbcore: registered new interface driver usbfs
Oct 17 13:59:10 IQ138000 kernel: usbcore: registered new interface driver hub
Oct 17 13:59:10 IQ138000 kernel: usbcore: registered new device driver usb
Oct 17 13:59:10 IQ138000 kernel: mc: Linux media interface: v0.10
Oct 17 13:59:10 IQ138000 kernel: videodev: Linux video capture interface: v2.00
Oct 17 13:59:10 IQ138000 kernel: pps_core: LinuxPPS API ver. 1 registered
Oct 17 13:59:10 IQ138000 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 17 13:59:10 IQ138000 kernel: PTP clock support registered
Oct 17 13:59:10 IQ138000 kernel: Advanced Linux Sound Architecture Driver Initialized.
Oct 17 13:59:10 IQ138000 kernel: clocksource: Switched to clocksource arch_sys_counter
Oct 17 13:59:10 IQ138000 kernel: NET: Registered protocol family 2
Oct 17 13:59:10 IQ138000 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Oct 17 13:59:10 IQ138000 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Oct 17 13:59:10 IQ138000 kernel: NET: Registered protocol family 1
Oct 17 13:59:10 IQ138000 kernel: RPC: Registered named UNIX socket transport module.
Oct 17 13:59:10 IQ138000 kernel: RPC: Registered udp transport module.
Oct 17 13:59:10 IQ138000 kernel: RPC: Registered tcp transport module.
Oct 17 13:59:10 IQ138000 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 17 13:59:10 IQ138000 kernel: hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Oct 17 13:59:10 IQ138000 kernel: Initialise system trusted keyrings
Oct 17 13:59:10 IQ138000 kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
Oct 17 13:59:10 IQ138000 kernel: NFS: Registering the id_resolver key type
Oct 17 13:59:10 IQ138000 kernel: Key type id_resolver registered
Oct 17 13:59:10 IQ138000 kernel: Key type id_legacy registered
Oct 17 13:59:10 IQ138000 kernel: Key type asymmetric registered
Oct 17 13:59:10 IQ138000 kernel: Asymmetric key parser 'x509' registered
Oct 17 13:59:10 IQ138000 kernel: bounce: pool size: 64 pages
Oct 17 13:59:10 IQ138000 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 17 13:59:10 IQ138000 kernel: io scheduler mq-deadline registered
Oct 17 13:59:10 IQ138000 kernel: io scheduler kyber registered
Oct 17 13:59:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 17 13:59:10 IQ138000 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Oct 17 13:59:10 IQ138000 kernel: brd: module loaded
Oct 17 13:59:10 IQ138000 kernel: loop: module loaded
Oct 17 13:59:10 IQ138000 kernel: libphy: Fixed MDIO Bus: probed
Oct 17 13:59:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 17 13:59:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 17 13:59:10 IQ138000 kernel: CAN device driver interface
Oct 17 13:59:10 IQ138000 kernel: PPP generic driver version 2.4.2
Oct 17 13:59:10 IQ138000 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 17 13:59:10 IQ138000 kernel: ehci-platform: EHCI generic platform driver
Oct 17 13:59:10 IQ138000 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 17 13:59:10 IQ138000 kernel: ohci-platform: OHCI generic platform driver
Oct 17 13:59:10 IQ138000 kernel: usbcore: registered new interface driver usb-storage
Oct 17 13:59:10 IQ138000 kernel: usbcore: registered new interface driver usbserial_generic
Oct 17 13:59:10 IQ138000 kernel: usbserial: USB Serial support registered for generic
Oct 17 13:59:10 IQ138000 kernel: sun6i-rtc 1c20400.rtc: registered as rtc1
Oct 17 13:59:10 IQ138000 kernel: sun6i-rtc 1c20400.rtc: RTC enabled
Oct 17 13:59:10 IQ138000 kernel: i2c /dev entries driver
Oct 17 13:59:10 IQ138000 kernel: sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Oct 17 13:59:10 IQ138000 kernel: ledtrig-cpu: registered to indicate activity on CPUs
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(aes)
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(aes)
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
Oct 17 13:59:10 IQ138000 kernel: sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
Oct 17 13:59:10 IQ138000 kernel: usbcore: registered new interface driver usbhid
Oct 17 13:59:10 IQ138000 kernel: usbhid: USB HID core driver
Oct 17 13:59:10 IQ138000 kernel: Initializing XFRM netlink socket
Oct 17 13:59:10 IQ138000 kernel: NET: Registered protocol family 10
Oct 17 13:59:10 IQ138000 kernel: Segment Routing with IPv6
Oct 17 13:59:10 IQ138000 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Oct 17 13:59:10 IQ138000 kernel: NET: Registered protocol family 17
Oct 17 13:59:10 IQ138000 kernel: can: controller area network core
Oct 17 13:59:10 IQ138000 kernel: NET: Registered protocol family 29
Oct 17 13:59:10 IQ138000 kernel: can: raw protocol
Oct 17 13:59:10 IQ138000 kernel: can: broadcast manager protocol
Oct 17 13:59:10 IQ138000 kernel: can: netlink gateway - max_hops=1
Oct 17 13:59:10 IQ138000 kernel: can: SAE J1939
Oct 17 13:59:10 IQ138000 kernel: Key type dns_resolver registered
Oct 17 13:59:10 IQ138000 kernel: Registering SWP/SWPB emulation handler
Oct 17 13:59:10 IQ138000 kernel: registered taskstats version 1
Oct 17 13:59:10 IQ138000 kernel: Loading compiled-in X.509 certificates
Oct 17 13:59:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
Oct 17 13:59:10 IQ138000 kernel: printk: console [ttyS0] disabled
Oct 17 13:59:10 IQ138000 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i
Oct 17 13:59:10 IQ138000 kernel: printk: console [ttyS0] enabled
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18  on device 1c20800.pinctrl
Oct 17 13:59:10 IQ138000 kernel: dw-apb-uart 1c28800.serial: Error applying setting, reverse things back
Oct 17 13:59:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: DMA mask not set
Oct 17 13:59:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: registered as rtc0
Oct 17 13:59:10 IQ138000 kernel: wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-10-17T13:59:06 UTC (1760709546)
Oct 17 13:59:10 IQ138000 kernel: wbec spi0.0: WBEC device added
Oct 17 13:59:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 17 13:59:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8  on device 1c20800.pinctrl
Oct 17 13:59:10 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517
Oct 17 13:59:10 IQ138000 kernel: sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0  on device 1c20800.pinctrl
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back
Oct 17 13:59:10 IQ138000 kernel: i2c i2c-0: Not using recovery: no suitable method provided
Oct 17 13:59:10 IQ138000 kernel: axp20x-i2c 0-0034: AXP20x variant AXP221 found
Oct 17 13:59:10 IQ138000 kernel: vcc-3v3: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: vdd-cpu: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: vdd-sys: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: dcdc4: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: vcc-dram: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER
Oct 17 13:59:10 IQ138000 kernel: vcc-gmac-phy: supplied by vcc-3v3
Oct 17 13:59:10 IQ138000 kernel: dc5ldo: supplied by vcc-dram
Oct 17 13:59:10 IQ138000 kernel: tv: Bringing 700000uV into 3300000-3300000uV
Oct 17 13:59:10 IQ138000 kernel: tv: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: aldo2: Bringing 2500000uV into 3300000-3300000uV
Oct 17 13:59:10 IQ138000 kernel: aldo2: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: avcc-pll: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: eldo1: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: eldo2: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: vcc-pe: Bringing 1200000uV into 1800000-1800000uV
Oct 17 13:59:10 IQ138000 kernel: vcc-pe: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV
Oct 17 13:59:10 IQ138000 kernel: vcc-sd-alt: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: dldo2: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: dldo3: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: dldo4: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: rtc_ldo: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: random: fast init done
Oct 17 13:59:10 IQ138000 kernel: ldo_io0: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: ldo_io1: supplied by regulator-dummy
Oct 17 13:59:10 IQ138000 kernel: axp20x-adc axp22x-adc: DMA mask not set
Oct 17 13:59:10 IQ138000 kernel: axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
Oct 17 13:59:10 IQ138000 kernel: axp20x-i2c 0-0034: AXP20X driver loaded
Oct 17 13:59:10 IQ138000 kernel: i2c i2c-1: using pinctrl states for GPIO recovery
Oct 17 13:59:10 IQ138000 kernel: gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Oct 17 13:59:10 IQ138000 kernel: i2c i2c-1: using generic GPIOs for recovery
Oct 17 13:59:10 IQ138000 kernel: i2c i2c-2: Not using recovery: no suitable method provided
Oct 17 13:59:10 IQ138000 kernel: sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3
Oct 17 13:59:10 IQ138000 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i
Oct 17 13:59:10 IQ138000 kernel: sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator
Oct 17 13:59:10 IQ138000 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
Oct 17 13:59:10 IQ138000 kernel: libphy: sun4i_mii_bus: probed
Oct 17 13:59:10 IQ138000 kernel: mmc0: new DDR MMC card at address 0001
Oct 17 13:59:10 IQ138000 kernel: mmcblk0: mmc0:0001 88A398 7.28 GiB 
Oct 17 13:59:10 IQ138000 kernel: mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB
Oct 17 13:59:10 IQ138000 kernel: sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:88:12
Oct 17 13:59:10 IQ138000 kernel: mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found
Oct 17 13:59:10 IQ138000 kernel: mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0)
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: PTP uses main clock
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: COE Type 2
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Normal descriptors
Oct 17 13:59:10 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet: Chain mode enabled
Oct 17 13:59:10 IQ138000 kernel: libphy: stmmac: probed
Oct 17 13:59:10 IQ138000 kernel:  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c14000.usb: EHCI Host Controller
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
Oct 17 13:59:10 IQ138000 kernel: hub 1-0:1.0: USB hub found
Oct 17 13:59:10 IQ138000 kernel: hub 1-0:1.0: 1 port detected
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c19000.usb: EHCI Host Controller
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00
Oct 17 13:59:10 IQ138000 kernel: hub 2-0:1.0: USB hub found
Oct 17 13:59:10 IQ138000 kernel: hub 2-0:1.0: 1 port detected
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c1c000.usb: EHCI Host Controller
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000
Oct 17 13:59:10 IQ138000 kernel: ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Oct 17 13:59:10 IQ138000 kernel: hub 3-0:1.0: USB hub found
Oct 17 13:59:10 IQ138000 kernel: hub 3-0:1.0: 1 port detected
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c14400.usb: Generic Platform OHCI controller
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400
Oct 17 13:59:10 IQ138000 kernel: hub 4-0:1.0: USB hub found
Oct 17 13:59:10 IQ138000 kernel: hub 4-0:1.0: 1 port detected
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c19400.usb: Generic Platform OHCI controller
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400
Oct 17 13:59:10 IQ138000 kernel: hub 5-0:1.0: USB hub found
Oct 17 13:59:10 IQ138000 kernel: hub 5-0:1.0: 1 port detected
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6
Oct 17 13:59:10 IQ138000 kernel: usb 2-1: new high-speed USB device number 2 using ehci-platform
Oct 17 13:59:10 IQ138000 kernel: ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400
Oct 17 13:59:10 IQ138000 kernel: hub 6-0:1.0: USB hub found
Oct 17 13:59:10 IQ138000 kernel: hub 6-0:1.0: 1 port detected
Oct 17 13:59:10 IQ138000 kernel: of_cfs_init
Oct 17 13:59:10 IQ138000 kernel: of_cfs_init: OK
Oct 17 13:59:10 IQ138000 kernel: ALSA device list:
Oct 17 13:59:10 IQ138000 kernel:   No soundcards found.
Oct 17 13:59:10 IQ138000 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Oct 17 13:59:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Oct 17 13:59:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Oct 17 13:59:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): recovery complete
Oct 17 13:59:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Oct 17 13:59:10 IQ138000 kernel: VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Oct 17 13:59:10 IQ138000 kernel: devtmpfs: mounted
Oct 17 13:59:10 IQ138000 kernel: Freeing unused kernel memory: 1024K
Oct 17 13:59:10 IQ138000 kernel: Run /sbin/init as init process
Oct 17 13:59:10 IQ138000 kernel:   with arguments:
Oct 17 13:59:10 IQ138000 kernel:     /sbin/init
Oct 17 13:59:10 IQ138000 kernel:   with environment:
Oct 17 13:59:10 IQ138000 kernel:     HOME=/
Oct 17 13:59:10 IQ138000 kernel:     TERM=linux
Oct 17 13:59:10 IQ138000 systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
Oct 17 13:59:10 IQ138000 systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
Oct 17 13:59:10 IQ138000 systemd[1]: Detected architecture arm.
Oct 17 13:59:10 IQ138000 systemd[1]: Set hostname to <IQ138000>.
Oct 17 13:59:10 IQ138000 systemd[1]: Queued start job for default target Graphical Interface.
Oct 17 13:59:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 17 13:59:10 IQ138000 systemd[1]: Created slice system-getty.slice.
Oct 17 13:59:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 17 13:59:10 IQ138000 systemd[1]: Created slice system-modprobe.slice.
Oct 17 13:59:10 IQ138000 kernel: random: systemd: uninitialized urandom read (16 bytes read)
Oct 17 13:59:10 IQ138000 systemd[1]: Created slice system-serial\x2dgetty.slice.
Oct 17 13:59:10 IQ138000 systemd[1]: Created slice system-systemd\x2dfsck.slice.
Oct 17 13:59:10 IQ138000 systemd[1]: Created slice User and Session Slice.
Oct 17 13:59:10 IQ138000 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Oct 17 13:59:10 IQ138000 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Oct 17 13:59:10 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 17 13:59:10 IQ138000 systemd[1]: Reached target Local Encrypted Volumes.
Oct 17 13:59:10 IQ138000 systemd[1]: Reached target Paths.
Oct 17 13:59:10 IQ138000 systemd[1]: Reached target Remote File Systems.
Oct 17 13:59:10 IQ138000 systemd[1]: Reached target Slices.
Oct 17 13:59:10 IQ138000 systemd[1]: Listening on fsck to fsckd communication Socket.
Oct 17 13:59:10 IQ138000 systemd[1]: Listening on initctl Compatibility Named Pipe.
Oct 17 13:59:10 IQ138000 systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
Oct 17 13:59:10 IQ138000 systemd[1]: Listening on Journal Socket (/dev/log).
Oct 17 13:59:10 IQ138000 systemd[1]: Listening on Journal Socket.
Oct 17 13:59:10 IQ138000 systemd[1]: Listening on udev Control Socket.
Oct 17 13:59:10 IQ138000 systemd[1]: Listening on udev Kernel Socket.
Oct 17 13:59:10 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 17 13:59:10 IQ138000 systemd[1]: Mounting POSIX Message Queue File System...
Oct 17 13:59:10 IQ138000 systemd[1]: Mounting /sys/kernel/config...
Oct 17 13:59:10 IQ138000 systemd[1]: Mounting Kernel Debug File System...
Oct 17 13:59:10 IQ138000 systemd[1]: Mounting Kernel Trace File System...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Create list of static device nodes for the current kernel...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Load Kernel Module drm...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Load Kernel Module fuse...
Oct 17 13:59:10 IQ138000 kernel: fuse: init (API version 7.32)
Oct 17 13:59:10 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 17 13:59:10 IQ138000 systemd[1]: Starting File System Check on Root Device...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Journal Service...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Load Kernel Modules...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Coldplug All udev Devices...
Oct 17 13:59:10 IQ138000 systemd[1]: Mounted POSIX Message Queue File System.
Oct 17 13:59:10 IQ138000 systemd[1]: Mounted /sys/kernel/config.
Oct 17 13:59:10 IQ138000 systemd[1]: Mounted Kernel Debug File System.
Oct 17 13:59:10 IQ138000 systemd[1]: Mounted Kernel Trace File System.
Oct 17 13:59:10 IQ138000 systemd[1]: Finished Create list of static device nodes for the current kernel.
Oct 17 13:59:10 IQ138000 systemd[1]: modprobe@drm.service: Succeeded.
Oct 17 13:59:10 IQ138000 systemd[1]: Finished Load Kernel Module drm.
Oct 17 13:59:10 IQ138000 systemd-journald[139]: Journal started
Oct 17 13:59:10 IQ138000 systemd-journald[139]: Runtime Journal (/run/log/journal/0def5d0b8b2d465785b7a963706c4269) is 2.4M, max 19.9M, 17.4M free.
Oct 17 13:59:10 IQ138000 systemd-fsck[142]: rootfs1: clean, 37038/131072 files, 278736/524288 blocks
Oct 17 13:59:10 IQ138000 systemd[1]: Started Journal Service.
Oct 17 13:59:10 IQ138000 systemd[1]: modprobe@fuse.service: Succeeded.
Oct 17 13:59:10 IQ138000 systemd[1]: Finished Load Kernel Module fuse.
Oct 17 13:59:10 IQ138000 systemd[1]: Finished File System Check on Root Device.
Oct 17 13:59:10 IQ138000 systemd[1]: Finished Load Kernel Modules.
Oct 17 13:59:10 IQ138000 systemd[1]: Mounting FUSE Control File System...
Oct 17 13:59:10 IQ138000 systemd[1]: Started File System Check Daemon to report status.
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Remount Root and Kernel File Systems...
Oct 17 13:59:10 IQ138000 systemd[1]: Starting Apply Kernel Variables...
Oct 17 13:59:10 IQ138000 kernel: EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro
Oct 17 13:59:10 IQ138000 systemd[1]: Mounted FUSE Control File System.
Oct 17 13:59:11 IQ138000 systemd[1]: Finished Remount Root and Kernel File Systems.
Oct 17 13:59:11 IQ138000 systemd[1]: Finished Apply Kernel Variables.
Oct 17 13:59:11 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 17 13:59:11 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 17 13:59:11 IQ138000 systemd[1]: Starting Load/Save Random Seed...
Oct 17 13:59:11 IQ138000 systemd[1]: Starting Create System Users...
Oct 17 13:59:11 IQ138000 systemd-random-seed[151]: Kernel entropy pool is not initialized yet, waiting until it is.
Oct 17 13:59:11 IQ138000 systemd[1]: Finished Create System Users.
Oct 17 13:59:11 IQ138000 systemd[1]: Finished Coldplug All udev Devices.
Oct 17 13:59:11 IQ138000 systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Oct 17 13:59:11 IQ138000 systemd[1]: Starting Create Static Device Nodes in /dev...
Oct 17 13:59:11 IQ138000 systemd[1]: Finished Helper to synchronize boot up for ifupdown.
Oct 17 13:59:11 IQ138000 systemd[1]: Finished Create Static Device Nodes in /dev.
Oct 17 13:59:11 IQ138000 systemd[1]: Reached target Local File Systems (Pre).
Oct 17 13:59:11 IQ138000 systemd[1]: Set up automount mnt-sdcard.automount.
Oct 17 13:59:11 IQ138000 systemd[1]: Starting Rule-based Manager for Device Events and Files...
Oct 17 13:59:11 IQ138000 systemd-udevd[156]: /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.
Oct 17 13:59:11 IQ138000 systemd[1]: Started Rule-based Manager for Device Events and Files.
Oct 17 13:59:12 IQ138000 kernel: Driver for 1-wire Dallas network protocol.
Oct 17 13:59:12 IQ138000 systemd-udevd[157]: Using default interface naming scheme 'v247'.
Oct 17 13:59:12 IQ138000 kernel: usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator
Oct 17 13:59:12 IQ138000 kernel: wbec-power wbec-power.6.auto: DMA mask not set
Oct 17 13:59:12 IQ138000 kernel: wbec-gpio wbec-gpio.2.auto: DMA mask not set
Oct 17 13:59:12 IQ138000 kernel: wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set
Oct 17 13:59:12 IQ138000 kernel: wbec-adc wbec-adc.1.auto: DMA mask not set
Oct 17 13:59:12 IQ138000 kernel: iio-rescale vin-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0
Oct 17 13:59:12 IQ138000 kernel: wbec-watchdog wbec-watchdog.3.auto: DMA mask not set
Oct 17 13:59:12 IQ138000 kernel: iio-rescale v33-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: iio-rescale v50-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: Core ver 2.22
Oct 17 13:59:12 IQ138000 kernel: NET: Registered protocol family 31
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: HCI device and connection manager initialized
Oct 17 13:59:12 IQ138000 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: HCI socket layer initialized
Oct 17 13:59:12 IQ138000 kernel: iio-rescale vbus-debug-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: L2CAP socket layer initialized
Oct 17 13:59:12 IQ138000 kernel: iio-rescale vbus-network-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: SCO socket layer initialized
Oct 17 13:59:12 IQ138000 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 17 13:59:12 IQ138000 kernel: usbcore: registered new interface driver btusb
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723
Oct 17 13:59:12 IQ138000 kernel: cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin
Oct 17 13:59:12 IQ138000 kernel: iio-rescale a1-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 systemd-udevd[166]: Using default interface naming scheme 'v247'.
Oct 17 13:59:12 IQ138000 systemd-udevd[166]: eth1: Failed to query device driver: Device or resource busy
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin
Oct 17 13:59:12 IQ138000 kernel: Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507
Oct 17 13:59:12 IQ138000 kernel: iio-rescale a2-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: iio-rescale a3-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 kernel: iio-rescale a4-volt: using raw+scale source channel
Oct 17 13:59:12 IQ138000 systemd[1]: Found device /dev/mmcblk0p6.
Oct 17 13:59:12 IQ138000 kernel: RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e
Oct 17 13:59:12 IQ138000 kernel: RTW: rtl8733bu BT-Coex version = COEX20230616-330e
Oct 17 13:59:12 IQ138000 kernel: RTW: [HALMAC]138
                                 HALMAC_MAJOR_VER = 1
                                 HALMAC_PROTOTYPE_VER = 6
                                 HALMAC_MINOR_VER = 6
                                 HALMAC_PATCH_VER = 42
Oct 17 13:59:13 IQ138000 systemd[1]: Found device /dev/mmcblk0p5.
Oct 17 13:59:13 IQ138000 kernel: Bluetooth: hci0: RTL: fw version 0xd9b80b4f
Oct 17 13:59:13 IQ138000 systemd[1]: Found device /dev/ttyS0.
Oct 17 13:59:13 IQ138000 kernel: RTW: rtw_rfctl_decide_init_chplan chplan:0x7F
Oct 17 13:59:13 IQ138000 kernel: RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:da:3c
Oct 17 13:59:13 IQ138000 kernel: RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:da:3c
Oct 17 13:59:13 IQ138000 kernel: usbcore: registered new interface driver rtl8733bu
Oct 17 13:59:13 IQ138000 systemd-udevd[163]: Using default interface naming scheme 'v247'.
Oct 17 13:59:13 IQ138000 systemd-udevd[161]: Using default interface naming scheme 'v247'.
Oct 17 13:59:13 IQ138000 systemd-udevd[163]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 17 13:59:13 IQ138000 systemd-udevd[161]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 17 13:59:13 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 17 13:59:13 IQ138000 kernel: RTW: default domain:0x5e applied, txpwr_lmt:?ETSI
Oct 17 13:59:13 IQ138000 kernel: RTW: world wide applied, txpwr_lmt:WW
Oct 17 13:59:13 IQ138000 kernel: RTW: rtw_set_country_cmd country_code:"KZ"
Oct 17 13:59:13 IQ138000 systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
Oct 17 13:59:13 IQ138000 systemd[1]: Reached target Hardware activated USB gadget.
Oct 17 13:59:13 IQ138000 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Oct 17 13:59:13 IQ138000 systemd[1]: Activating swap /dev/mmcblk0p5...
Oct 17 13:59:13 IQ138000 systemd[1]: Condition check resulted in Huge Pages File System being skipped.
Oct 17 13:59:13 IQ138000 systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
Oct 17 13:59:13 IQ138000 systemd[1]: Starting File System Check on /dev/mmcblk0p6...
Oct 17 13:59:13 IQ138000 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
Oct 17 13:59:13 IQ138000 kernel: Adding 262140k swap on /dev/mmcblk0p5.  Priority:-2 extents:1 across:262140k SSDsc
Oct 17 13:59:13 IQ138000 systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
Oct 17 13:59:13 IQ138000 systemd[1]: Activated swap /dev/mmcblk0p5.
Oct 17 13:59:13 IQ138000 systemd[1]: Reached target Swap.
Oct 17 13:59:13 IQ138000 systemd[1]: Starting Load/Save RF Kill Switch Status...
Oct 17 13:59:13 IQ138000 systemd-fsck[215]: data: recovering journal
Oct 17 13:59:13 IQ138000 systemd-fsck[215]: data: clean, 16469/328656 files, 374220/1313536 blocks
Oct 17 13:59:13 IQ138000 systemd[1]: Started Load/Save RF Kill Switch Status.
Oct 17 13:59:13 IQ138000 systemd[1]: Finished File System Check on /dev/mmcblk0p6.
Oct 17 13:59:13 IQ138000 systemd[1]: Mounting /mnt/data...
Oct 17 13:59:13 IQ138000 systemd[1]: Mounted /mnt/data.
Oct 17 13:59:13 IQ138000 kernel: EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard
Oct 17 13:59:13 IQ138000 systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
Oct 17 13:59:13 IQ138000 systemd[1]: Mounting /var/log...
Oct 17 13:59:13 IQ138000 systemd[1]: Mounted /var/log.
Oct 17 13:59:13 IQ138000 systemd[1]: Reached target Local File Systems.
Oct 17 13:59:14 IQ138000 systemd[1]: Starting Flush Journal to Persistent Storage...
Oct 17 13:59:14 IQ138000 systemd-journald[139]: Time spent on flushing to /var/log/journal/0def5d0b8b2d465785b7a963706c4269 is 46.424ms for 462 entries.
Oct 17 13:59:14 IQ138000 systemd-journald[139]: System Journal (/var/log/journal/0def5d0b8b2d465785b7a963706c4269) is 500.3M, max 496.6M, 0B free.
Oct 17 13:59:14 IQ138000 systemd[1]: Starting prepare mounts and symlinks to config files...
Oct 17 13:59:14 IQ138000 wb-configs-early[222]: Checking symlinks to /mnt/data
Oct 17 13:59:14 IQ138000 systemd[1]: Finished Flush Journal to Persistent Storage.
Oct 17 13:59:14 IQ138000 kernel: random: crng init done
Oct 17 13:59:14 IQ138000 kernel: random: 7 urandom warning(s) missed due to ratelimiting
Oct 17 13:59:14 IQ138000 systemd[1]: Finished Load/Save Random Seed.
Oct 17 13:59:14 IQ138000 systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
Oct 17 13:59:14 IQ138000 wb-configs-early[222]: /etc/wb-cloud-agent: unable to find file to fix broken state
Oct 17 13:59:14 IQ138000 wb-configs-early[222]: Setting ownership www-data to /mnt/data/uploads
Oct 17 13:59:14 IQ138000 systemd[1]: Finished prepare mounts and symlinks to config files.
Oct 17 13:59:14 IQ138000 systemd[1]: Starting Create Volatile Files and Directories...
Oct 17 13:59:14 IQ138000 systemd[1]: Finished Create Volatile Files and Directories.
Oct 17 13:59:15 IQ138000 systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Oct 17 13:59:15 IQ138000 systemd[1]: Finished Update UTMP about System Boot/Shutdown.
Oct 17 13:59:15 IQ138000 systemd[1]: Reached target System Initialization.
Oct 17 13:59:15 IQ138000 systemd[1]: Started Daily apt download activities.
Oct 17 13:59:15 IQ138000 systemd[1]: Started Daily apt upgrade and clean activities.
Oct 17 13:59:15 IQ138000 systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
Oct 17 13:59:15 IQ138000 systemd[1]: Started Discard unused blocks once a week.
Oct 17 13:59:15 IQ138000 systemd[1]: Started Daily rotation of log files.
Oct 17 13:59:15 IQ138000 systemd[1]: Started Daily Cleanup of Temporary Directories.
Oct 17 13:59:15 IQ138000 systemd[1]: Reached target Timers.
Oct 17 13:59:15 IQ138000 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Oct 17 13:59:15 IQ138000 systemd[1]: Listening on D-Bus System Message Bus Socket.
Oct 17 13:59:15 IQ138000 systemd[1]: Listening on fcgiwrap Socket.
Oct 17 13:59:15 IQ138000 systemd[1]: Listening on KNX Daemon (socket).
Oct 17 13:59:15 IQ138000 systemd[1]: Reached target Sockets.
Oct 17 13:59:15 IQ138000 systemd[1]: Reached target Basic System.
Oct 17 13:59:15 IQ138000 systemd[1]: System is tainted: local-hwclock
Oct 17 13:59:15 IQ138000 systemd[1]: Starting Bluetooth service...
Oct 17 13:59:15 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 17 13:59:15 IQ138000 systemd[1]: Started Regular background program processing daemon.
Oct 17 13:59:15 IQ138000 cron[299]: (CRON) INFO (pidfile fd = 3)
Oct 17 13:59:15 IQ138000 cron[299]: (CRON) INFO (Running @reboot jobs)
Oct 17 13:59:15 IQ138000 systemd[1]: Started D-Bus System Message Bus.
Oct 17 13:59:15 IQ138000 bluetoothd[296]: Bluetooth daemon 5.55
Oct 17 13:59:15 IQ138000 systemd[1]: Starting Network Manager...
Oct 17 13:59:15 IQ138000 systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
Oct 17 13:59:15 IQ138000 bluetoothd[296]: Starting SDP server
Oct 17 13:59:15 IQ138000 systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
Oct 17 13:59:15 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 17 13:59:15 IQ138000 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 17 13:59:15 IQ138000 kernel: Bluetooth: BNEP filters: protocol multicast
Oct 17 13:59:15 IQ138000 kernel: Bluetooth: BNEP socket layer initialized
Oct 17 13:59:15 IQ138000 bluetoothd[296]: Bluetooth management interface 1.18 initialized
Oct 17 13:59:15 IQ138000 dbus-daemon[300]: [system] Activating systemd to hand-off: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.0' (uid=0 pid=296 comm="/usr/libexec/bluetooth/bluetoothd ")
Oct 17 13:59:15 IQ138000 bluetoothd[296]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Oct 17 13:59:15 IQ138000 bluetoothd[296]: sap-server: Operation not permitted (1)
Oct 17 13:59:15 IQ138000 systemd[1]: Starting "Watchdog for wb-rules and wb-mqtt-serial"...
Oct 17 13:59:15 IQ138000 config-manager[297]: terminate called after throwing an instance of 'std::runtime_error'
Oct 17 13:59:15 IQ138000 config-manager[297]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 17 13:59:15 IQ138000 systemd[1]: Starting LSB: service and resource monitoring daemon...
Oct 17 13:59:15 IQ138000 wb-watchdog[326]: [INFO] Interval #1 started. Waiting up to 60 seconds for error...
Oct 17 13:59:15 IQ138000 systemd[1]: Starting Authorization Manager...
Oct 17 13:59:15 IQ138000 migrate.sh[324]: Error: No such file or directory
Oct 17 13:59:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 17 13:59:16 IQ138000 migrate.sh[331]: Error: No such file or directory
Oct 17 13:59:16 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 17 13:59:16 IQ138000 systemd[1]: Starting User Login Management...
Oct 17 13:59:16 IQ138000 migrate.sh[343]: Error: No such file or directory
Oct 17 13:59:16 IQ138000 reverse-ssh.sh[348]: Error: No such file or directory
Oct 17 13:59:16 IQ138000 polkitd[329]: started daemon version 0.105 using authority implementation `local' version `0.105'
Oct 17 13:59:16 IQ138000 systemd[1]: Starting User command handler service...
Oct 17 13:59:16 IQ138000 systemd[1]: Started watch config files.
Oct 17 13:59:16 IQ138000 migrate.sh[355]: Error: No such file or directory
Oct 17 13:59:16 IQ138000 systemd[1]: Starting Initialize Wiren Board Device Tree overlays...
Oct 17 13:59:16 IQ138000 systemd[1]: Condition check resulted in initialize filesystems at first boot being skipped.
Oct 17 13:59:16 IQ138000 systemd[1]: Condition check resulted in First Boot Complete being skipped.
Oct 17 13:59:16 IQ138000 migrate.sh[364]: Error: No such file or directory
Oct 17 13:59:16 IQ138000 systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Oct 17 13:59:16 IQ138000 rules-preprocessor[338]: terminate called after throwing an instance of 'std::runtime_error'
Oct 17 13:59:16 IQ138000 rules-preprocessor[338]:   what():  Previous command ended with error: Error: MQTT Code: -1 Description: TCP/TLS connect failure
Oct 17 13:59:16 IQ138000 systemd[1]: Starting IQnergy controller configurator...
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Found user 'avahi' (UID 106) and group 'avahi' (GID 112).
Oct 17 13:59:16 IQ138000 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Successfully dropped root privileges.
Oct 17 13:59:16 IQ138000 systemd[1]: Starting WPA supplicant...
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: avahi-daemon 0.8 starting up.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Successfully called chroot().
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Successfully dropped remaining capabilities.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: No service file found in /etc/avahi/services.
Oct 17 13:59:16 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Joining mDNS multicast group on interface lo.IPv6 with address ::1.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: New relevant interface lo.IPv6 for mDNS.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: New relevant interface lo.IPv4 for mDNS.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Network interface enumeration completed.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Registering new address record for ::1 on lo.*.
Oct 17 13:59:16 IQ138000 avahi-daemon[371]: Registering new address record for 127.0.0.1 on lo.IPv4.
Oct 17 13:59:16 IQ138000 systemd-logind[353]: Watching system buttons on /dev/input/event0 (wbec pwrkey)
Oct 17 13:59:16 IQ138000 systemd-logind[353]: New seat seat0.
Oct 17 13:59:16 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 17 13:59:16 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 17 13:59:16 IQ138000 wb-watch-configs[388]: Watched dirs: /etc /etc/network
Oct 17 13:59:16 IQ138000 systemd[1]: Failed to start Device Configuration Service.
Oct 17 13:59:16 IQ138000 systemd[1]: e2scrub_reap.service: Succeeded.
Oct 17 13:59:16 IQ138000 wpa_supplicant[382]: Successfully initialized wpa_supplicant
Oct 17 13:59:16 IQ138000 systemd[1]: Finished Remove Stale Online ext4 Metadata Check Snapshots.
Oct 17 13:59:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Failed with result 'exit-code'.
Oct 17 13:59:16 IQ138000 systemd[1]: Failed to start "Package for self install & migrate IQnergy software".
Oct 17 13:59:16 IQ138000 systemd[1]: Started "Watchdog for wb-rules and wb-mqtt-serial".
Oct 17 13:59:16 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:16 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 17 13:59:16 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 17 13:59:16 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=6/NOTCONFIGURED
Oct 17 13:59:16 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 17 13:59:16 IQ138000 systemd[1]: Failed to start User command preprocessor.
Oct 17 13:59:16 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:16 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 17 13:59:16 IQ138000 systemd[1]: Failed to start User command handler service.
Oct 17 13:59:16 IQ138000 systemd[1]: configure-controller.service: Succeeded.
Oct 17 13:59:16 IQ138000 systemd[1]: Started IQnergy controller configurator.
Oct 17 13:59:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 17 13:59:16 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 17 13:59:16 IQ138000 systemd[1]: Failed to start Zigbee available emulator.
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.0496] NetworkManager (version 1.42.4) is starting... (boot:1462ecf2-b969-43da-a5d6-1fe8f05c3e1c)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.0500] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf, wb.conf)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.0611] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager"
Oct 17 13:59:17 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 17 13:59:17 IQ138000 systemd[1]: Started Bluetooth service.
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.1179] manager[0x726900]: monitoring kernel firmware directory '/lib/firmware'.
Oct 17 13:59:17 IQ138000 systemd[1]: Started Authorization Manager.
Oct 17 13:59:17 IQ138000 monit[325]: Starting daemon monitor: monit.
Oct 17 13:59:17 IQ138000 systemd[1]: Started LSB: service and resource monitoring daemon.
Oct 17 13:59:17 IQ138000 systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Oct 17 13:59:17 IQ138000 systemd[1]: Started WPA supplicant.
Oct 17 13:59:17 IQ138000 avahi-daemon[371]: Server startup complete. Host name is IQ138000.local. Local service cookie is 4261657448.
Oct 17 13:59:17 IQ138000 systemd[1]: Started User Login Management.
Oct 17 13:59:17 IQ138000 systemd[1]: Started Network Manager.
Oct 17 13:59:17 IQ138000 systemd[1]: Reached target Bluetooth.
Oct 17 13:59:17 IQ138000 systemd[1]: Starting Modem Manager...
Oct 17 13:59:17 IQ138000 systemd[1]: Starting Network Manager Wait Online...
Oct 17 13:59:17 IQ138000 systemd[1]: Starting Online ext4 Metadata Check for All Filesystems...
Oct 17 13:59:17 IQ138000 systemd[1]: Starting Hostname Service...
Oct 17 13:59:17 IQ138000 systemd[1]: Starting Rotate log files...
Oct 17 13:59:17 IQ138000 systemd[1]: e2scrub_all.service: Succeeded.
Oct 17 13:59:17 IQ138000 systemd[1]: Finished Online ext4 Metadata Check for All Filesystems.
Oct 17 13:59:17 IQ138000 ModemManager[492]: <info>  ModemManager (version 1.20.0) starting in system bus...
Oct 17 13:59:17 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.hostname1'
Oct 17 13:59:17 IQ138000 systemd[1]: Started Hostname Service.
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.8639] hostname: hostname: using hostnamed
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.8642] hostname: static hostname changed from (none) to "IQ138000"
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.8688] dns-mgr: init: dns=default,systemd-resolved rc-manager=file
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.8764] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c19000.usb/usb2/2-1/2-1:1.2/ieee80211/phy0/rfkill1) (driver rtl8733bu)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.8821] manager[0x726900]: rfkill: Wi-Fi hardware radio set enabled
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.8824] manager[0x726900]: rfkill: WWAN hardware radio set enabled
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9135] Loaded device plugin: NMTeamFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-team.so)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9231] Loaded device plugin: NMWifiFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wifi.so)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9273] Loaded device plugin: NMAtmManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-adsl.so)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9631] Loaded device plugin: NMBluezManager (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-bluetooth.so)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9670] Loaded device plugin: NMWwanFactory (/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-device-plugin-wwan.so)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9692] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9698] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9702] manager: Networking is enabled by state file
Oct 17 13:59:17 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9902] settings: Loaded settings plugin: ifupdown ("/usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-settings-plugin-ifupdown.so")
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9906] settings: Loaded settings plugin: keyfile (internal)
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9908] ifupdown: management mode: unmanaged
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9910] ifupdown:       interface-parser: parsing file /etc/network/interfaces
Oct 17 13:59:17 IQ138000 NetworkManager[404]: <info>  [1760709557.9912] ifupdown:       interface-parser: finished parsing file /etc/network/interfaces
Oct 17 13:59:18 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.0632] dhcp: init: Using DHCP client 'internal'
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.0656] manager: (lo): new Loopback device (/org/freedesktop/NetworkManager/Devices/1)
Oct 17 13:59:18 IQ138000 systemd[1]: Started Modem Manager.
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.0833] device (lo): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 13:59:18 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.0890] device (lo): state change: unavailable -> disconnected (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 13:59:18 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.1012] device (lo): Activation: starting connection 'lo' (588475cb-51ff-4c67-baa4-eb9d4d4d8540)
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.1176] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.1203] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.4881] device (eth1): driver '(null)' does not support carrier detection.
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.4909] device (eth1): driver 'dwmac-sun8i' does not support carrier detection.
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.4941] manager: (eth1): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.5010] device (eth1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:18 IQ138000 systemd[1]: logrotate.service: Succeeded.
Oct 17 13:59:18 IQ138000 systemd[1]: Finished Rotate log files.
Oct 17 13:59:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL)
Oct 17 13:59:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found
Oct 17 13:59:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available
Oct 17 13:59:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW
Oct 17 13:59:18 IQ138000 kernel: dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.6898] manager: (sit0): new IPTunnel device (/org/freedesktop/NetworkManager/Devices/4)
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.6942] device (wlan0): driver supports Access Point (AP) mode
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.7008] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/5)
Oct 17 13:59:18 IQ138000 NetworkManager[404]: <info>  [1760709558.7033] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:18 IQ138000 systemd[1]: systemd-rfkill.service: Succeeded.
Oct 17 13:59:19 IQ138000 kernel: RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384)
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.5348] device (wlan1): driver supports Access Point (AP) mode
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.5389] manager: (wlan1): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/6)
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.5427] device (wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6106] device (lo): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6161] device (lo): state change: prepare -> config (reason 'none', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6184] device (lo): state change: config -> ip-config (reason 'none', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6590] modem-manager: ModemManager available
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6611] device (lo): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 wpa_supplicant[382]: nl80211: kernel reports: Authentication algorithm number required
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6773] device (lo): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6795] device (lo): state change: secondaries -> activated (reason 'none', sys-iface-state: 'external')
Oct 17 13:59:19 IQ138000 NetworkManager[404]: <info>  [1760709559.6840] device (lo): Activation: successful, device activated.
Oct 17 13:59:19 IQ138000 wpa_supplicant[382]: nl80211: kernel reports: Authentication algorithm number required
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0056] device (wlan0): supplicant interface state: internal-starting -> disconnected
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0064] Wi-Fi P2P device controlled by interface wlan0 created
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0099] manager: (p2p-dev-wlan0): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/7)
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0116] device (p2p-dev-wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0156] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0206] device (p2p-dev-wlan0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0363] device (wlan1): supplicant interface state: internal-starting -> disconnected
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0370] Wi-Fi P2P device controlled by interface wlan1 created
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0392] manager: (p2p-dev-wlan1): new 802.11 Wi-Fi P2P device (/org/freedesktop/NetworkManager/Devices/8)
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0417] device (p2p-dev-wlan1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0504] device (wlan1): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Oct 17 13:59:20 IQ138000 NetworkManager[404]: <info>  [1760709560.0575] device (p2p-dev-wlan1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:20 IQ138000 ModemManager[492]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c0b000.ethernet': not supported by any plugin
Oct 17 13:59:20 IQ138000 ModemManager[492]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c19000.usb/usb2/2-1': not supported by any plugin
Oct 17 13:59:20 IQ138000 ModemManager[492]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c50000.ethernet': not supported by any plugin
Oct 17 13:59:23 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 13:59:23 IQ138000 init.sh[1343]: Initializing wb72-mod1:wbe2r-r-zigbee.
Oct 17 13:59:23 IQ138000 init.sh[1358]: In file included from -:16:
Oct 17 13:59:23 IQ138000 init.sh[1358]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:23 IQ138000 kernel: 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 3000000) is a Allwinner sun4i
Oct 17 13:59:23 IQ138000 init.sh[1343]: ...Initializing wb72-wbc:wbc-4g-usb.
Oct 17 13:59:24 IQ138000 init.sh[1343]: ...Initializing wb74-rs485-1:wb67-can-rs485.
Oct 17 13:59:24 IQ138000 init.sh[1418]: In file included from -:11:
Oct 17 13:59:24 IQ138000 init.sh[1418]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:24 IQ138000 init.sh[1343]: ...
Oct 17 13:59:24 IQ138000 init.sh[1433]: In file included from -:11:
Oct 17 13:59:24 IQ138000 init.sh[1433]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:24 IQ138000 init.sh[1343]: failsafe bias enabled
Oct 17 13:59:24 IQ138000 init.sh[1343]: terminators are enabled
Oct 17 13:59:24 IQ138000 init.sh[1343]: Initializing wb74-rs485-2:wb67-can-rs485.
Oct 17 13:59:24 IQ138000 init.sh[1452]: In file included from -:24:
Oct 17 13:59:24 IQ138000 init.sh[1452]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:25 IQ138000 kernel: 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 3000000) is a Allwinner sun4i
Oct 17 13:59:25 IQ138000 init.sh[1343]: ...
Oct 17 13:59:25 IQ138000 init.sh[1468]: In file included from -:24:
Oct 17 13:59:25 IQ138000 init.sh[1468]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:25 IQ138000 init.sh[1343]: failsafe bias enabled
Oct 17 13:59:25 IQ138000 init.sh[1343]: terminators are enabled
Oct 17 13:59:25 IQ138000 init.sh[1343]: Initializing wb74-w1:wb6-wx-1wire.
Oct 17 13:59:25 IQ138000 init.sh[1490]: In file included from -:11:
Oct 17 13:59:25 IQ138000 init.sh[1490]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:25 IQ138000 init.sh[1343]: ...Initializing wb74-w2:wb6-wx-1wire.
Oct 17 13:59:25 IQ138000 init.sh[1513]: In file included from -:11:
Oct 17 13:59:25 IQ138000 init.sh[1513]: /usr/share/wb-hwconf-manager/slots/r40-soc.h:16: warning: WBIO_INT_OPEN_DRAIN_OPTION redefined
Oct 17 13:59:26 IQ138000 init.sh[1343]: ...
Oct 17 13:59:26 IQ138000 systemd[1]: Finished Initialize Wiren Board Device Tree overlays.
Oct 17 13:59:26 IQ138000 systemd[1]: Starting Raise network interfaces...
Oct 17 13:59:26 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 17 13:59:26 IQ138000 systemd[1]: Starting Power on GSM modem...
Oct 17 13:59:26 IQ138000 systemd[1]: Starting KNXD Configurator for Wiren Board...
Oct 17 13:59:26 IQ138000 systemd[1]: Finished Raise network interfaces.
Oct 17 13:59:26 IQ138000 systemd[1]: Reached target Network.
Oct 17 13:59:26 IQ138000 systemd[1]: Starting dnsmasq - A lightweight DHCP and caching DNS server...
Oct 17 13:59:26 IQ138000 systemd[1]: Starting Access point and authentication server for Wi-Fi and Ethernet...
Oct 17 13:59:26 IQ138000 systemd[1]: knxd.service: Failed to load environment files: Bad message
Oct 17 13:59:26 IQ138000 systemd[1]: knxd.service: Failed to run 'start' task: Bad message
Oct 17 13:59:26 IQ138000 systemd[1]: knxd.service: Failed with result 'resources'.
Oct 17 13:59:26 IQ138000 systemd[1]: Failed to start KNX Daemon.
Oct 17 13:59:26 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 17 13:59:26 IQ138000 systemd[1]: Starting Mosquitto MQTT Broker...
Oct 17 13:59:26 IQ138000 lsyncd[1641]: 13:59:26 Normal: --- Startup ---
Oct 17 13:59:26 IQ138000 lsyncd[1641]: 13:59:26 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 17 13:59:26 IQ138000 lsyncd[1641]: iq_network_manager/iq_network_manager.log
Oct 17 13:59:26 IQ138000 lsyncd[1641]: journal
Oct 17 13:59:26 IQ138000 lsyncd[1641]: messages
Oct 17 13:59:26 IQ138000 systemd[1]: Starting Network Time Service...
Oct 17 13:59:26 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 17 13:59:26 IQ138000 systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped.
Oct 17 13:59:26 IQ138000 systemd[1]: Starting OpenBSD Secure Shell server...
Oct 17 13:59:27 IQ138000 systemd[1]: Starting Permit User Sessions...
Oct 17 13:59:27 IQ138000 ntpd[1653]: ntpd 4.2.8p15@1.3728-o Wed Sep 23 11:46:38 UTC 2020 (1): Starting
Oct 17 13:59:27 IQ138000 ntpd[1653]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:108
Oct 17 13:59:27 IQ138000 ntpd[1653]: ----------------------------------------------------
Oct 17 13:59:27 IQ138000 ntpd[1653]: ntp-4 is maintained by Network Time Foundation,
Oct 17 13:59:27 IQ138000 ntpd[1653]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
Oct 17 13:59:27 IQ138000 ntpd[1653]: corporation.  Support and training for ntp-4 are
Oct 17 13:59:27 IQ138000 ntpd[1653]: available at https://www.nwtime.org/support
Oct 17 13:59:27 IQ138000 systemd[1]: Started Unattended Upgrades Shutdown.
Oct 17 13:59:27 IQ138000 ntpd[1653]: ----------------------------------------------------
Oct 17 13:59:27 IQ138000 lsyncd[1658]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 17 13:59:27 IQ138000 lsyncd[1651]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 17 13:59:27 IQ138000 lsyncd[1651]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 17 13:59:27 IQ138000 lsyncd[1641]: 13:59:27 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 17 13:59:27 IQ138000 ntpd[1679]: proto: precision = 1.000 usec (-20)
Oct 17 13:59:27 IQ138000 systemd[1]: Started vnStat network traffic monitor.
Oct 17 13:59:27 IQ138000 ntpd[1679]: basedate set to 2020-09-11
Oct 17 13:59:27 IQ138000 ntpd[1679]: gps base set to 2020-09-13 (week 2123)
Oct 17 13:59:27 IQ138000 ntpd[1679]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): good hash signature
Oct 17 13:59:27 IQ138000 ntpd[1679]: leapsecond file ('/usr/share/zoneinfo/leap-seconds.list'): loaded, expire=2025-12-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Oct 17 13:59:27 IQ138000 ntpd[1679]: Listen and drop on 0 v6wildcard [::]:123
Oct 17 13:59:27 IQ138000 ntpd[1679]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 17 13:59:27 IQ138000 ntpd[1679]: Listen normally on 2 lo 127.0.0.1:123
Oct 17 13:59:27 IQ138000 ntpd[1679]: Listen normally on 3 lo [::1]:123
Oct 17 13:59:27 IQ138000 ntpd[1679]: Listening on routing socket on fd #20 for interface updates
Oct 17 13:59:27 IQ138000 systemd[1]: Starting MQTT Driver for ADC...
Oct 17 13:59:27 IQ138000 persist_meter_data.sh[1678]: Error: No such file or directory
Oct 17 13:59:27 IQ138000 wb-knxd-config.sh[1543]: No /dev/ttyKNX found, disabling level2
Oct 17 13:59:27 IQ138000 wb-knxd-config.sh[1543]: Restart knxd
Oct 17 13:59:27 IQ138000 systemd[1]: Starting MQTT Driver for GPIO-controlled switches...
Oct 17 13:59:27 IQ138000 systemd[1]: Started MQTT Driver for serial devices.
Oct 17 13:59:27 IQ138000 systemd[1]: Starting Health monitor service...
Oct 17 13:59:27 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 17 13:59:27 IQ138000 systemd[1]: Started zigbee2mqtt.
Oct 17 13:59:27 IQ138000 wb-mqtt-w1[1727]: MQTT broker localhost:1883
Oct 17 13:59:27 IQ138000 wb-mqtt-w1[1727]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:27 IQ138000 wb-mqtt-w1[1727]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 17 13:59:27 IQ138000 wb-mqtt-w1[1727]: terminate called after throwing an instance of 'WBMQTT::TMqttException'
Oct 17 13:59:27 IQ138000 wb-mqtt-w1[1727]:   what():  Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:270
Oct 17 13:59:27 IQ138000 systemd[1]: dnsmasq.service: Control process exited, code=exited, status=1/FAILURE
Oct 17 13:59:27 IQ138000 systemd[1]: dnsmasq.service: Skipped due to 'exec-condition'.
Oct 17 13:59:27 IQ138000 systemd[1]: Condition check resulted in dnsmasq - A lightweight DHCP and caching DNS server being skipped.
Oct 17 13:59:27 IQ138000 systemd[1]: hostapd.service: Control process exited, code=exited, status=1/FAILURE
Oct 17 13:59:27 IQ138000 systemd[1]: hostapd.service: Skipped due to 'exec-condition'.
Oct 17 13:59:27 IQ138000 systemd[1]: Condition check resulted in Access point and authentication server for Wi-Fi and Ethernet being skipped.
Oct 17 13:59:27 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 17 13:59:27 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 17 13:59:27 IQ138000 wb-connection-manager[1532]: Connection LegacyWiFi not found, skipping
Oct 17 13:59:27 IQ138000 systemd[1]: Started Network Time Service.
Oct 17 13:59:27 IQ138000 systemd[1]: persist-meter-data.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:27 IQ138000 systemd[1]: persist-meter-data.service: Failed with result 'exit-code'.
Oct 17 13:59:27 IQ138000 systemd[1]: Finished Permit User Sessions.
Oct 17 13:59:28 IQ138000 wb-connection-manager[1532]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 17 13:59:28 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 17 13:59:28 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 17 13:59:28 IQ138000 systemd[1]: Failed to start Health monitor service.
Oct 17 13:59:28 IQ138000 ntpd[1679]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Oct 17 13:59:28 IQ138000 systemd[1]: Dependency failed for Zigbee available emulator.
Oct 17 13:59:28 IQ138000 systemd[1]: zigbee-available-emulator.service: Job zigbee-available-emulator.service/start failed with result 'dependency'.
Oct 17 13:59:28 IQ138000 systemd[1]: Dependency failed for User command handler service.
Oct 17 13:59:28 IQ138000 systemd[1]: usr-cmd-handler.service: Job usr-cmd-handler.service/start failed with result 'dependency'.
Oct 17 13:59:28 IQ138000 systemd[1]: Dependency failed for Data collection and transformation service.
Oct 17 13:59:28 IQ138000 systemd[1]: data-handler.service: Job data-handler.service/start failed with result 'dependency'.
Oct 17 13:59:28 IQ138000 wb-connection-manager[1532]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 17 13:59:28 IQ138000 systemd[1]: wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
Oct 17 13:59:28 IQ138000 systemd[1]: wb-mqtt-w1.service: Failed with result 'signal'.
Oct 17 13:59:28 IQ138000 sshd[1775]: Server listening on 0.0.0.0 port 22.
Oct 17 13:59:28 IQ138000 sshd[1775]: Server listening on :: port 22.
Oct 17 13:59:28 IQ138000 systemd[1]: Started OpenBSD Secure Shell server.
Oct 17 13:59:28 IQ138000 systemd[1]: Started MQTT Driver for GPIO-controlled switches.
Oct 17 13:59:28 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:28 IQ138000 systemd[1]: Reached target Host and Network Name Lookups.
Oct 17 13:59:28 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Oct 17 13:59:28 IQ138000 wpa_supplicant[382]: wlan0: Reject scan trigger since one is already pending
Oct 17 13:59:28 IQ138000 systemd[1]: Started Getty on tty1.
Oct 17 13:59:28 IQ138000 vnstatd[1684]: Info: vnStat daemon 2.6 started. (pid:1684 uid:110 gid:117 64-bit)
Oct 17 13:59:28 IQ138000 vnstatd[1684]: Info: Monitoring (5): wlan1 (1000 Mbit) wlan0 (1000 Mbit) ppp0 (1000 Mbit) eth1 (1000 Mbit) eth0 (1000 Mbit)
Oct 17 13:59:28 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:28 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Oct 17 13:59:28 IQ138000 vnstatd[1684]: Info: Interface "ppp0" disabled.
Oct 17 13:59:28 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 13:59:28 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 13:59:28 IQ138000 systemd[1]: Starting A high performance web server and a reverse proxy server...
Oct 17 13:59:28 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 17 13:59:28 IQ138000 NetworkManager[404]: <error> [1760709568.7221] audit: failed to open auditd socket: Protocol not supported
Oct 17 13:59:28 IQ138000 NetworkManager[404]: <info>  [1760709568.7224] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=1532 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 13:59:28 IQ138000 wb-connection-manager[1532]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 17 13:59:28 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 17 13:59:28 IQ138000 knxd[1864]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 17 13:59:28 IQ138000 knxd[1864]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 17 13:59:28 IQ138000 systemd[1]: Started Serial Getty on ttyS0.
Oct 17 13:59:28 IQ138000 systemd[1]: Reached target Login Prompts.
Oct 17 13:59:28 IQ138000 systemd[1]: Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)...
Oct 17 13:59:29 IQ138000 ntpd[1679]: error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2)
Oct 17 13:59:29 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 13:59:29 IQ138000 systemd[1]: Finished KNXD Configurator for Wiren Board.
Oct 17 13:59:29 IQ138000 reverse-ssh.sh[1911]: Error: No such file or directory
Oct 17 13:59:29 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:29 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 17 13:59:29 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:29 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 17 13:59:29 IQ138000 systemd[1]: Failed to start Reverse SSH Tunneling.
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.3877] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.3884] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=1532 uid=0 result="success"
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.3891] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.3912] manager: NetworkManager state is now CONNECTING
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.3958] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.4335] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.4338] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.4618] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.4641] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.4661] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.5033] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.5035] Config: added 'scan_ssid' value '1'
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.5036] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.5038] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.5039] Config: added 'psk' value '<hidden>'
Oct 17 13:59:29 IQ138000 wb-adjust-systime[1901]: Found active ntp service. Will look to /var/lib/ntp/ntp.drift
Oct 17 13:59:29 IQ138000 wb-adjust-systime[1901]: Drift file is valid (was recently edited)
Oct 17 13:59:29 IQ138000 systemd[1]: Finished Compensation of systime in PPM from value, stored in device-tree (with opposite sign).
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Loading config file /usr/share/wb-configs/mosquitto/000persistence.conf
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.6872] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 13:59:29 IQ138000 NetworkManager[404]: <info>  [1760709569.6874] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Loading config file /usr/share/wb-configs/mosquitto/30limits.conf
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Loading config file /etc/mosquitto/conf.d/00default_listener.conf
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Loading config file /etc/mosquitto/conf.d/10listeners.conf
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Loading config file /etc/mosquitto/conf.d/20bridge.conf
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Warning: Error resolving bridge address: Name or service not known.
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Loading config file /etc/mosquitto/conf.d/20bridges.conf
Oct 17 13:59:29 IQ138000 mosquitto[1956]: 1760709569: Note: It is recommended to replace `message_size_limit` with `max_packet_size`.
Oct 17 13:59:29 IQ138000 systemd[1]: Started Mosquitto MQTT Broker.
Oct 17 13:59:29 IQ138000 systemd[1]: Starting Unattended upgrades MQTT trigger...
Oct 17 13:59:29 IQ138000 systemd[1]: Starting "IQ network manager"...
Oct 17 13:59:29 IQ138000 systemd[1]: Started Wiren Board modbus devices manager.
Oct 17 13:59:29 IQ138000 systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data.
Oct 17 13:59:30 IQ138000 systemd[1]: Started Wiren Board configuration editor backend.
Oct 17 13:59:30 IQ138000 systemd[1]: Started Wiren Board database logger.
Oct 17 13:59:30 IQ138000 ntpd[1679]: error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2)
Oct 17 13:59:30 IQ138000 systemd[1]: Starting Wiren Board MQTT to IEC 60870-5-104 gateway...
Oct 17 13:59:30 IQ138000 systemd[1]: Started Wiren Board MQTT KNX bridge.
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: MQTT broker localhost:1883
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: Config file /etc/wb-mqtt-db.conf
Oct 17 13:59:30 IQ138000 systemd[1]: Started Wiren Board journald to MQTT gateway.
Oct 17 13:59:30 IQ138000 systemd[1]: Started Wiren Board MQTT to Modbus gateway.
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:30 IQ138000 wb-mqtt-logs[2054]: MQTT broker localhost:1883
Oct 17 13:59:30 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:30 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:30 IQ138000 systemd[1]: Started metrics sender.
Oct 17 13:59:30 IQ138000 systemd[1]: Started Virtual MQTT devices management service for Network Manager connections.
Oct 17 13:59:30 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:30 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: INFO: [sqlite] Creating tables if necessary
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: INFO: [sqlite] Create indices if necessary
Oct 17 13:59:30 IQ138000 wb-mqtt-db[2031]: INFO: [sqlite] Analyzing data table
Oct 17 13:59:30 IQ138000 systemd[1]: Starting Wiren Board MQTT to OPC UA gateway...
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:106 (A4_OUT)
Oct 17 13:59:30 IQ138000 systemd[1]: Started Wiren Board firmware update service.
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio chip driver] Initialized output GPIO line 1:4 (V_OUT)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [gpio driver] Started
Oct 17 13:59:30 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 17 13:59:31 IQ138000 ntpd[1679]: error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2)
Oct 17 13:59:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 17 13:59:31 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.576s CPU time.
Oct 17 13:59:31 IQ138000 systemd[1]: Started Unattended upgrades MQTT trigger.
Oct 17 13:59:31 IQ138000 systemd[1]: Started "IQ network manager".
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: ERROR: [mqtt] disconnect error: MOSQ_ERR_NO_CONN
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2034]: ERROR: [mqtt] loop_stop error: MOSQ_ERR_INVAL
Oct 17 13:59:31 IQ138000 systemd[1]: Started Wiren Board MQTT to IEC 60870-5-104 gateway.
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 17 13:59:31 IQ138000 wb-mqtt-opcua[2096]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 17 13:59:31 IQ138000 wb-mqtt-confed[2024]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 17 13:59:31 IQ138000 wb-mqtt-confed[2024]: INFO: [wbgo_mqtt] confed-IQ138000-2024: MQTT connection established
Oct 17 13:59:31 IQ138000 wb-mqtt-iec104[2177]: wb-mqtt-iec104 1.1.13 git 68e55e00eb82d75ada1d7dc6aa4fd50abf84f81d build on Nov 29 2024 17:00:00
Oct 17 13:59:32 IQ138000 systemd[1]: Started Wiren Board MQTT to OPC UA gateway.
Oct 17 13:59:32 IQ138000 wb-mqtt-opcua[2247]: wb-mqtt-opcua 1.1.11 git 4010e91f08ec20655950d00db098b447a9b66fd1
Oct 17 13:59:32 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:32 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:32 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:32 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 17 13:59:32 IQ138000 systemd[1]: Started A high performance web server and a reverse proxy server.
Oct 17 13:59:32 IQ138000 systemd[1]: Starting Initialize Wiren Board on successful boot...
Oct 17 13:59:32 IQ138000 systemd[1]: Starting USB Debug Network...
Oct 17 13:59:33 IQ138000 systemd[1]: persist-meter-data.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:33 IQ138000 systemd[1]: Stopped MQTT Local Backup of Metering Data.
Oct 17 13:59:33 IQ138000 systemd[1]: Started MQTT Local Backup of Metering Data.
Oct 17 13:59:33 IQ138000 wb-mqtt-mbgate[2063]: ERROR: [mbgate] All channels are disabled, stopping service gracefully
Oct 17 13:59:33 IQ138000 systemd[1]: wb-mqtt-mbgate.service: Succeeded.
Oct 17 13:59:33 IQ138000 wb-mqtt-iec104[2177]: ERROR: [main] All groups are disabled in config file, stopping service gracefully
Oct 17 13:59:33 IQ138000 wb-mqtt-opcua[2247]: ERROR: [main] All groups are disabled, stopping service gracefully
Oct 17 13:59:33 IQ138000 systemd[1]: wb-mqtt-iec104.service: Succeeded.
Oct 17 13:59:33 IQ138000 systemd[1]: wb-mqtt-opcua.service: Succeeded.
Oct 17 13:59:34 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:34 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:34 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:34 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 17 13:59:34 IQ138000 wb-mqtt-knx[2042]: INFO: Connecting to knxd... URL: 'local:/var/run/knx'
Oct 17 13:59:35 IQ138000 NetworkManager[404]: <info>  [1760709575.2706] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 13:59:35 IQ138000 NetworkManager[404]: <info>  [1760709575.2709] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 13:59:35 IQ138000 python3[1999]: No data file found at /tmp/network_status_cache.json
Oct 17 13:59:35 IQ138000 python3[1999]: Connecting to MQTT
Oct 17 13:59:35 IQ138000 python3[1999]: Connected to MQTT
Oct 17 13:59:35 IQ138000 python3[1999]: Connection returned result: Connection Accepted.
Oct 17 13:59:35 IQ138000 dbus-daemon[300]: [system] Connection :1.17 (uid=0 pid=2088 comm="python3 /usr/bin/wb-mqtt-nm-helper ") became a monitor.
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/1
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/2
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/3
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/4
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/5
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/6
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New connection /org/freedesktop/NetworkManager/Settings/7
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New virtual device lo 588475cb-51ff-4c67-baa4-eb9d4d4d8540 /org/freedesktop/NetworkManager/Settings/7
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 17 13:59:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection lo 588475cb-51ff-4c67-baa4-eb9d4d4d8540 /org/freedesktop/NetworkManager/Settings/7 /org/freedesktop/NetworkManager/ActiveConnection/1
Oct 17 13:59:37 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:37 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:37 IQ138000 wb-device-manager[2011]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 17 13:59:37 IQ138000 wb-device-manager[2011]: [INFO] Registered to atexit hook: close unix:///var/run/mosquitto/mosquitto.sock
Oct 17 13:59:38 IQ138000 kernel: vcc-gmac-phy: disabling
Oct 17 13:59:38 IQ138000 kernel: dc5ldo: disabling
Oct 17 13:59:38 IQ138000 kernel: dldo4: disabling
Oct 17 13:59:38 IQ138000 systemd[1]: Started MQTT Driver for ADC.
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: MQTT broker localhost:1883
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Creating driver MQTT controls
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device8/in_voltage0_scale = 11
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device9/in_voltage0_scale = 11
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device10/in_voltage0_scale = 11
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device11/in_voltage0_scale = 11
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 1
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 1
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device5/in_voltage0_scale = 1
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device6/in_voltage0_scale = 1
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] /sys/bus/iio/devices/iio:device7/in_voltage0_scale = 1
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] ADC worker thread is started
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel A4 MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel V3_3 MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel V5_0 MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel Vbus_debug MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [wb-adc] Channel Vbus_network MQTT controls are created, poll interval 700 ms
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 17 13:59:38 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 17 13:59:39 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:39 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 2.
Oct 17 13:59:39 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 13:59:39 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 13:59:39 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 17 13:59:39 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 17 13:59:39 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 17 13:59:39 IQ138000 knxd[3175]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 17 13:59:39 IQ138000 knxd[3175]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 17 13:59:39 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 13:59:39 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:39 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 17 13:59:39 IQ138000 wb-mqtt-confed[2024]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM25" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM21" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM28" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM26" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM19" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM32" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM14" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM30" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM17" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM15" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM20" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM11" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM18" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM31" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM23" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM24" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM29" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM12" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM13" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM16" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM22" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 193" channel "Play from ROM27" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM25" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM21" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM28" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM26" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM19" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM32" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM14" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM30" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM17" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM15" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM20" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM11" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM18" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM31" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM23" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM24" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM29" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM12" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM13" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM16" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM22" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 119" channel "Play from ROM27" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM25" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM21" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM28" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM26" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM19" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM32" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM14" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM30" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM17" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM15" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM20" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM11" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM18" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM31" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM23" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM24" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM29" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM12" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM13" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM16" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM22" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 204" channel "Play from ROM27" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial config] Device WB-M1W2 22 wb-m1w2_22 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial config] Device WB-M1W2 40 wb-m1w2_40 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM25" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM21" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM28" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM26" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM19" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM32" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM14" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM30" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM17" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM15" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM20" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM11" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM18" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM31" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM23" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM24" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM29" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM12" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM13" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM16" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM22" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 115" channel "Play from ROM27" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM25" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM21" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM28" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM26" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM19" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM32" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM14" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM30" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM17" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM15" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM20" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM11" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM18" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM31" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM23" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM24" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM29" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM12" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM13" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM16" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM22" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 208" channel "Play from ROM27" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial config] Device WB-M1W2 38 wb-m1w2_38 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 2" is ignored: Serial protocol error: write and read register address are not defined
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial config] Device WB-M1W2 16 wb-m1w2_16 (WB-M1W2) channel "External Sensor 1" is ignored: Serial protocol error: write and read register address are not defined
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM25" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM21" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM28" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM26" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM19" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM32" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM14" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM30" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM17" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM15" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM20" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM11" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM18" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM31" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM23" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM24" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM29" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM12" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM13" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM16" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM22" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MIR v2 47" channel "Play from ROM27" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MAO4 48" channel "Channel 4" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MAO4 48" channel "Channel 3" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MAO4 48" channel "Channel 2" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial config] "WB-MAO4 48" channel "Channel 1" override property "enabled"
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 4)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 17 13:59:40 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 457)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 17 13:59:41 IQ138000 wb-gsm[3343]: main: Called from pid 1 (systemd)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 916)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 923)
Oct 17 13:59:41 IQ138000 wb-gsm[3384]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 936)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 937)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 951)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 958)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 965)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 978)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 991)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1004)
Oct 17 13:59:41 IQ138000 wb-usb-otg-start.sh[3413]: : wb-usb-otg-start
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1017)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1030)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1043)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1056)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1069)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1082)
Oct 17 13:59:41 IQ138000 wb-usb-otg-start.sh[3413]: main: setup_device()
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1095)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1102)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1109)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1116)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1123)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1130)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1137)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1144)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1151)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1158)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1165)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1172)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1179)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1186)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1193)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1200)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1207)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1214)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1221)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1228)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1235)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1242)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1249)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1256)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1263)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1270)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1277)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1284)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1291)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1298)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1305)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1312)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1319)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1326)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1333)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1340)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1347)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1354)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1361)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1368)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1375)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1382)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1389)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1402)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1403)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1429)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1430)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1456)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1457)
Oct 17 13:59:41 IQ138000 kernel: Mass Storage Function, version: 2009/09/11
Oct 17 13:59:41 IQ138000 kernel: LUN: removable file: (no medium)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1471)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1478)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1485)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1498)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1511)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1524)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1537)
Oct 17 13:59:41 IQ138000 kernel: using random self ethernet address
Oct 17 13:59:41 IQ138000 kernel: using random host ethernet address
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1550)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1563)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1576)
Oct 17 13:59:41 IQ138000 wb-usb-otg-start.sh[3413]: main: enabling profile rndis
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1589)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1602)
Oct 17 13:59:41 IQ138000 wb-gsm[3452]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1615)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1622)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1629)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1636)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1643)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1650)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1657)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1664)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1671)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1678)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1685)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1692)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1699)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1706)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1713)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1720)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1727)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1734)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1741)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1748)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1755)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1762)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1769)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1776)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1783)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1790)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1797)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1804)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1811)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1818)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1825)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1832)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1839)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1846)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1853)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1860)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1867)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1874)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1881)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1888)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1895)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1902)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1909)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1922)
Oct 17 13:59:41 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1923)
Oct 17 13:59:42 IQ138000 kernel: dbg0: HOST MAC 1a:55:89:a2:69:44
Oct 17 13:59:42 IQ138000 kernel: dbg0: MAC 1a:55:89:a2:69:43
Oct 17 13:59:42 IQ138000 NetworkManager[404]: <info>  [1760709582.0370] manager: (dbg0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/9)
Oct 17 13:59:42 IQ138000 systemd-udevd[3434]: Using default interface naming scheme 'v247'.
Oct 17 13:59:42 IQ138000 systemd[1]: Finished USB Debug Network.
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1937)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1944)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1951)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1964)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1977)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 1990)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2003)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2016)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2029)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2042)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2055)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2068)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2081)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2088)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2095)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2102)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2109)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2116)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2123)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2130)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2137)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2144)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2151)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2158)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2165)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2172)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2179)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2186)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2193)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2200)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2207)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2214)
Oct 17 13:59:42 IQ138000 NetworkManager[404]: <info>  [1760709582.2562] device (dbg0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2221)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2228)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2235)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2242)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2249)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2256)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2263)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2270)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2277)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2284)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2291)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2298)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2305)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2312)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2319)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2326)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2333)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2340)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2347)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2354)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2361)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2368)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2375)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2388)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2389)
Oct 17 13:59:42 IQ138000 wb-mqtt-db[2031]: INFO: [sqlite] DB initialization is done
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2415)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2416)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2442)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2443)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2457)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2464)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2471)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2484)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2497)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2510)
Oct 17 13:59:42 IQ138000 systemd[1]: Finished Initialize Wiren Board on successful boot.
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2523)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2536)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2549)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2562)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2575)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2588)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2601)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2608)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2615)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2622)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2629)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2636)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2643)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2650)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2657)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2664)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2671)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2678)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2685)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2692)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2699)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2706)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2713)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2720)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2727)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2734)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2741)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2748)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2755)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2762)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2769)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2776)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2783)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2790)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2797)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2804)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2811)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2818)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2825)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2832)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2839)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2846)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2853)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2860)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2867)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2874)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2881)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2888)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2895)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2908)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 2909)
Oct 17 13:59:42 IQ138000 wb-gsm[3529]: should_enable: Should enable GSM modem
Oct 17 13:59:42 IQ138000 systemd[1]: Started Power on GSM modem.
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3007)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3014)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3021)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3028)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3035)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3042)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3049)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3050)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3148)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3155)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3162)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3169)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3176)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3183)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3190)
Oct 17 13:59:42 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3191)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3289)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3296)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3303)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3310)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3317)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3324)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3331)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3332)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3454)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3462)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3470)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3477)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3485)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3493)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3500)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3508)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3516)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3523)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3531)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3539)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3546)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3547)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3765)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3766)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 3767)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 5930)
Oct 17 13:59:43 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 5931)
Oct 17 13:59:43 IQ138000 systemd[1]: systemd-fsckd.service: Succeeded.
Oct 17 13:59:43 IQ138000 wb-gsm[3600]: main: Called from pid 3530 (wb-gsm-mm)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: DB logger started, go to main loop
Oct 17 13:59:44 IQ138000 NetworkManager[404]: <info>  [1760709584.0213] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 13:59:44 IQ138000 NetworkManager[404]: <info>  [1760709584.0215] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 5993)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6000)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6007)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6014)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6015)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 5)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 6)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 11)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 12)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 13)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 15)
Oct 17 13:59:44 IQ138000 wb-gsm[3611]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 16)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 19)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6019)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6021)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [mqtt] subscription succeeded (message id 6023)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 20)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 21)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 22)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 23)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 24)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 25)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 26)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 27)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 28)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 29)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 30)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 31)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 32)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 33)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 34)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 35)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 36)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 37)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 38)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 39)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 40)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 41)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 42)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 43)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 44)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 45)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 46)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 47)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 48)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 49)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 50)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 51)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 52)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 53)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 54)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 55)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 56)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 57)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 58)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 59)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 60)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 61)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 62)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 63)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 64)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 65)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 66)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 67)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 68)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 69)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 70)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 71)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 72)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 73)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 74)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 82)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 83)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 84)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 85)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 86)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 87)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 88)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 89)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 90)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 91)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 92)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 93)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 94)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 95)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 96)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 97)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 98)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 99)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 100)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 101)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 102)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 103)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 104)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 105)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 106)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 107)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 108)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 109)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 110)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 111)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 112)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 113)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 114)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 115)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 116)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 117)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 118)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 115]
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:106 is disconnected
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:115:holding: 275> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:115 is connected
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 119)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 120)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 121)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 122)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 123)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 124)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 125)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 126)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 127)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 128)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 129)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 130)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 131)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 132)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 133)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 134)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 135)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 136)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 137)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 138)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 139)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 140)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 141)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 142)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 143)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 144)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 145)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 146)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 147)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 148)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 149)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 150)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 151)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 152)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 153)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 154)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 155)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 156)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 157)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 158)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 159)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 160)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 161)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 162)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 163)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 164)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 165)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 166)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 167)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 168)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 169)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 170)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 171)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 172)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 173)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 174)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 175)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 176)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 177)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 178)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 179)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 180)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 181)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 182)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 183)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 184)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 185)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 186)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 187)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 188)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 189)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 190)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 191)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 192)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 193)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 194)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 195)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 196)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 197)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 198)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 199)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 200)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 201)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 202)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 203)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 204)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 205)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 206)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 207)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 208)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 209)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 210)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 211)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 212)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 213)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 214)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 215)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 216)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 217)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 218)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 219)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 220)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 221)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 222)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 223)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 224)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 225)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 226)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 227)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 228)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 229)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 230)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 231)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 232)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 233)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 234)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 235)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 236)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 237)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 238)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 239)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 240)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 241)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 242)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 243)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 244)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 245)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 246)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 247)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 248)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 249)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 250)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 251)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 252)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 253)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 254)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 255)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 256)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 257)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 258)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 259)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 260)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 261)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 262)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 263)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 264)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 265)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 266)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 267)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 268)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 269)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 270)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 271)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 272)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 273)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 274)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 275)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 276)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 277)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 278)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 279)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 280)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 281)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 282)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 283)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is disconnected
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 284)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 285)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 286)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 287)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 288)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 289)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 290)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 291)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 292)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 293)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 294)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 295)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 296)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 297)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 298)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 299)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 300)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 301)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 302)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 304)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 305)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 306)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 307)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 308)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 309)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 310)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 311)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 312)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 313)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 314)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 315)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 316)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 317)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 318)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 319)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 320)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 321)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 322)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 323)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 324)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 325)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 326)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 327)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 328)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 329)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 330)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 331)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 332)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 333)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 334)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 335)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 336)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 337)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 338)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 339)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 340)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 341)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 342)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 343)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 344)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 345)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 346)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 347)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 348)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 349)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 350)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 351)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 352)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 353)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 354)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 355)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is disconnected
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 356)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 357)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 358)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 359)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 360)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 361)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 362)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 363)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 364)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 365)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 366)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 367)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 368)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 369)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 370)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 371)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 372)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 373)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 374)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 375)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 376)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 377)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 378)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 379)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 380)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 381)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 382)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 383)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 384)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 385)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 386)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 387)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 388)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 389)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 390)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 391)
Oct 17 13:59:44 IQ138000 wb-gsm[3642]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 392)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 393)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 394)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 395)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 396)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 397)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 398)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 399)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 400)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 401)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 402)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 403)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 404)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 405)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 406)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 407)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 408)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 409)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 410)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 411)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 412)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 413)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 414)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 415)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 416)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 417)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 418)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 419)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 420)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 421)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 422)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 423)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 424)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 425)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 426)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 427)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 428)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 429)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 430)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 431)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 432)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 433)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 434)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 435)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 436)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 437)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 438)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 439)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 440)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 441)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 442)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 443)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 444)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 445)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 446)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 447)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 448)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 449)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 450)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 451)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 452)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 453)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 454)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 455)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 458)
Oct 17 13:59:44 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 460)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 204]
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:204:holding: 275> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:204 is connected
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is disconnected
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 22]
Oct 17 13:59:44 IQ138000 ModemManager[492]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c13000.usb/musb-hdrc.8.auto': not supported by any plugin
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 275> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:22:holding: 276> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:22 is connected
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 38]
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 275> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 npm[1740]: > zigbee2mqtt@2.1.1 start
Oct 17 13:59:44 IQ138000 npm[1740]: > node index.js
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:38:holding: 276> <-- 0 (0x0)
Oct 17 13:59:44 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:38 is connected
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 40]
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 275> <-- 0 (0x0)
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 36]
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:40:holding: 276> <-- 0 (0x0)
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:40 is connected
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 8> <-- 3600 (0xe10)
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:36:holding: 5> <-- 0 (0x0)
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:36 is connected
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial client] Failed to enable events for modbus:36: Serial protocol error: request timed out
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 17 13:59:45 IQ138000 python3[1999]: Выполнение: service wb-connection-manager stop
Oct 17 13:59:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is disconnected
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 16]
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 275> <-- 0 (0x0)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 2 set input 2 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:16:holding: 276> <-- 0 (0x0)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:16 is connected
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 58]
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 4 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17505> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 3 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13410> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 4 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17504> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 3 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13409> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 4 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 17506> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 2 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9314> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 3 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 13408> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 2 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9313> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 2 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 9312> <-- 3000 (0xbb8)
Oct 17 13:59:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 119]
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 1 L3 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5218> <-- 3000 (0xbb8)
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:119:holding: 275> <-- 0 (0x0)
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:119 is connected
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 1 L2 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5217> <-- 3000 (0xbb8)
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Ch 1 L1 Turns: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:58:holding: 5216> <-- 3000 (0xbb8)
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:58 is connected
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial client] Failed to enable events for modbus:58: Serial protocol error: request timed out
Oct 17 13:59:47 IQ138000 wb-gsm[4020]: mm_off: Modem is already OFF
Oct 17 13:59:47 IQ138000 npm[3728]: Starting Zigbee2MQTT without watchdog.
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 13:59:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:48 IQ138000 wb-gsm[4091]: main: Called from pid 3530 (wb-gsm-mm)
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 17 13:59:48 IQ138000 wb-gsm[4102]: guess_of_node: Got of_gsm_node: /soc/usb@1c1c000/wbc-modem@1
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:48 IQ138000 wb-gsm[4125]: gsm_check_present: Modem is enabled in DT (/soc/usb@1c1c000/wbc-modem@1)
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5148 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5149 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5150 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: illegal data value
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is disconnected
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 47]
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:47:holding: 275>: Serial protocol error: illegal data value
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:47 is connected
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5406 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 13:59:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 13:59:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5408 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 13:59:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 17 13:59:52 IQ138000 systemd[1]: systemd-hostnamed.service: Succeeded.
Oct 17 13:59:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:52 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 2.
Oct 17 13:59:52 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:52 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:52 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:52 IQ138000 systemd[1]: wb-mqtt-w1.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:52 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid data size
Oct 17 13:59:52 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 17 13:59:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5409 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data value
Oct 17 13:59:52 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 17 13:59:53 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 13:59:53 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 13:59:53 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 17 13:59:53 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 17 13:59:53 IQ138000 systemd[1]: Stopped User command handler service.
Oct 17 13:59:53 IQ138000 systemd[1]: Starting User command handler service...
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:53 IQ138000 systemd[1]: Stopped Kernel 1-Wire MQTT driver for WB-HomA.
Oct 17 13:59:53 IQ138000 systemd[1]: Started Kernel 1-Wire MQTT driver for WB-HomA.
Oct 17 13:59:53 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 17 13:59:53 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 17 13:59:53 IQ138000 knxd[4525]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 17 13:59:53 IQ138000 knxd[4525]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 17 13:59:53 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: MQTT broker localhost:1883
Oct 17 13:59:53 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] UNIX socket exists, using it for connection
Oct 17 13:59:53 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 13:59:53 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] subscription succeeded (message id 1)
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] subscription succeeded (message id 2)
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: w1 thread Started
Oct 17 13:59:53 IQ138000 systemd[1]: Started User command preprocessor.
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 17 13:59:53 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] subscription succeeded (message id 10)
Oct 17 13:59:53 IQ138000 systemd[1]: Started User command handler service.
Oct 17 13:59:53 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 17 13:59:53 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 17 13:59:53 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 17 13:59:53 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 17 13:59:53 IQ138000 systemd[1]: wb-connection-manager.service: Consumed 1.204s CPU time.
Oct 17 13:59:53 IQ138000 python3[1999]: Команда "service wb-connection-manager stop" выполнена. Результат:
Oct 17 13:59:53 IQ138000 python3[1999]:  
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <warn>  [1760709594.5291] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <info>  [1760709594.5293] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <info>  [1760709594.5314] manager: NetworkManager state is now DISCONNECTED
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <warn>  [1760709594.5379] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <info>  [1760709594.5386] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <info>  [1760709594.5387] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 13:59:54 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <info>  [1760709594.5460] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 13:59:54 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/2
Oct 17 13:59:54 IQ138000 NetworkManager[404]: <info>  [1760709594.5744] manager: startup complete
Oct 17 13:59:54 IQ138000 systemd[1]: Finished Network Manager Wait Online.
Oct 17 13:59:54 IQ138000 systemd[1]: Reached target Network is Online.
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 systemd[1]: Starting LSB: Brings up/down network automatically...
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:54 IQ138000 kernel: process '/usr/sbin/netplugd' started with executable stack
Oct 17 13:59:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 13:59:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 coil(s) @ 5116 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 17 13:59:55 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 13:59:55 IQ138000 systemd[1]: Started LSB: Brings up/down network automatically.
Oct 17 13:59:55 IQ138000 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform
Oct 17 13:59:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 17 13:59:55 IQ138000 kernel: usb 3-1: USB disconnect, device number 2
Oct 17 13:59:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: illegal data address
Oct 17 13:59:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 holding(s) @ 100 of device </dev/ttyRS485-1 9600 8 N 2> modbus:61: Serial protocol error: request timed out
Oct 17 13:59:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:61 is disconnected
Oct 17 13:59:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 13:59:57 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 17 13:59:57 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 17 13:59:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 65]
Oct 17 13:59:58 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 13:59:58 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 8> <-- 3600 (0xe10)
Oct 17 13:59:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 13:59:58 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:65:holding: 5> <-- 0 (0x0)
Oct 17 13:59:58 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:65 is connected
Oct 17 13:59:58 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 13:59:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial client] Failed to enable events for modbus:65: Serial protocol error: request timed out
Oct 17 13:59:58 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 1.
Oct 17 13:59:58 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 17 13:59:58 IQ138000 systemd[1]: Starting Health monitor service...
Oct 17 13:59:58 IQ138000 systemd[1]: Stopping User command handler service...
Oct 17 13:59:58 IQ138000 systemd[1]: Stopping Zigbee available emulator...
Oct 17 13:59:58 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=15/n/a
Oct 17 13:59:58 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 17 13:59:58 IQ138000 systemd[1]: Stopped User command handler service.
Oct 17 13:59:58 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=15/n/a
Oct 17 13:59:58 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 17 13:59:58 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 17 13:59:58 IQ138000 systemd[1]: Starting User command handler service...
Oct 17 13:59:58 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 17 13:59:58 IQ138000 systemd[1]: Started Health monitor service.
Oct 17 13:59:58 IQ138000 systemd[1]: Started User command handler service.
Oct 17 13:59:58 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 17 13:59:58 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 17 13:59:58 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 17 13:59:58 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 17 13:59:58 IQ138000 systemd[1]: Reached target Multi-User System.
Oct 17 13:59:58 IQ138000 systemd[1]: Starting watchdog daemon...
Oct 17 13:59:58 IQ138000 watchdog[4649]: starting daemon (5.16):
Oct 17 13:59:58 IQ138000 watchdog[4649]:  int=1s realtime=yes sync=no load=0,0,0 soft=no
Oct 17 13:59:58 IQ138000 watchdog[4649]:  memory: minimum pages = 256 free, 0 allocatable, max swap 0 (4096 byte pages)
Oct 17 13:59:58 IQ138000 watchdog[4649]:  ping: no machine to check
Oct 17 13:59:58 IQ138000 watchdog[4649]:  file: no file to check
Oct 17 13:59:58 IQ138000 watchdog[4649]:  pidfile: /var/run/sshd.pid
Oct 17 13:59:58 IQ138000 watchdog[4649]:  interface: no interface to check
Oct 17 13:59:58 IQ138000 watchdog[4649]:  temperature: no sensors to check
Oct 17 13:59:58 IQ138000 watchdog[4649]:  no test binary files
Oct 17 13:59:58 IQ138000 watchdog[4649]:  no repair binary files
Oct 17 13:59:58 IQ138000 watchdog[4649]:  error retry time-out = 30 seconds
Oct 17 13:59:58 IQ138000 watchdog[4649]:  repair attempts = 1
Oct 17 13:59:58 IQ138000 watchdog[4649]:  alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Oct 17 13:59:58 IQ138000 watchdog[4649]: watchdog now set to 120 seconds
Oct 17 13:59:58 IQ138000 watchdog[4649]: hardware watchdog identity: WBEC WDT
Oct 17 13:59:58 IQ138000 systemd[1]: Started watchdog daemon.
Oct 17 13:59:58 IQ138000 systemd[1]: Reached target Graphical Interface.
Oct 17 13:59:58 IQ138000 systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 17 13:59:58 IQ138000 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
Oct 17 13:59:58 IQ138000 systemd[1]: Finished Update UTMP about System Runlevel Changes.
Oct 17 13:59:58 IQ138000 systemd[1]: Startup finished in 3.770s (kernel) + 50.565s (userspace) = 54.336s.
Oct 17 13:59:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 13:59:59 IQ138000 wb-rules[4642]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 17 13:59:59 IQ138000 wb-rules[4642]: INFO: driver is created
Oct 17 13:59:59 IQ138000 wb-rules[4642]: INFO: [wbgo_mqtt] rules-IQ138000-4642: MQTT connection established
Oct 17 13:59:59 IQ138000 wb-rules[4642]: INFO: driver loop is started
Oct 17 13:59:59 IQ138000 wb-rules[4642]: INFO: wait for driver to become ready
Oct 17 13:59:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 13:59:59 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 13:59:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 14:00:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:00 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 14:00:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 14:00:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 17 14:00:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:01 IQ138000 wb-rules[4642]: INFO: driver is ready
Oct 17 14:00:01 IQ138000 wb-rules[4642]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 17 14:00:01 IQ138000 wb-rules[4642]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4642: MQTT connection established
Oct 17 14:00:01 IQ138000 wb-rules[4642]: INFO: [engine] Starting main loop
Oct 17 14:00:01 IQ138000 wb-rules[4642]: INFO: the engine is ready
Oct 17 14:00:01 IQ138000 wb-rules[4642]: INFO: [engine] Starting sync loop
Oct 17 14:00:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5405 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 14:00:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:01 IQ138000 kernel: usb 3-1: new high-speed USB device number 3 using ehci-platform
Oct 17 14:00:01 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:02 IQ138000 kernel: usbcore: registered new interface driver cdc_ether
Oct 17 14:00:02 IQ138000 NetworkManager[404]: <info>  [1760709602.1848] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/10)
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5407 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is disconnected
Oct 17 14:00:02 IQ138000 kernel: rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 2a:b1:e9:4b:f2:dc
Oct 17 14:00:02 IQ138000 kernel: usbcore: registered new interface driver rndis_host
Oct 17 14:00:02 IQ138000 kernel: usbcore: registered new interface driver option
Oct 17 14:00:02 IQ138000 kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Oct 17 14:00:02 IQ138000 kernel: option 3-1:1.2: GSM modem (1-port) converter detected
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
Oct 17 14:00:02 IQ138000 kernel: option 3-1:1.4: GSM modem (1-port) converter detected
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
Oct 17 14:00:02 IQ138000 kernel: option 3-1:1.5: GSM modem (1-port) converter detected
Oct 17 14:00:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
Oct 17 14:00:02 IQ138000 kernel: option 3-1:1.3: GSM modem (1-port) converter detected
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:02 IQ138000 kernel: usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
Oct 17 14:00:02 IQ138000 systemd-udevd[4855]: Using default interface naming scheme 'v247'.
Oct 17 14:00:02 IQ138000 systemd-udevd[4855]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 17 14:00:02 IQ138000 wb-rules[4642]: WARNING: [rule warning] DAC: no config file
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:02 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:03 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 17 14:00:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:03 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 17 14:00:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 14:00:03 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 3.
Oct 17 14:00:03 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 14:00:03 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 14:00:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:03 IQ138000 knxd[5015]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 17 14:00:03 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 14:00:03 IQ138000 knxd[5015]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 17 14:00:03 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 14:00:03 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 17 14:00:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 14:00:04 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 17 14:00:04 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 14:00:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 14:00:04 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 17 14:00:05 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 17 14:00:05 IQ138000 wb-gsm[5036]: mm_on: Waiting for modem to start
Oct 17 14:00:05 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:05 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 17 14:00:05 IQ138000 python3[1999]: Monitoring '/etc/wb-connection-manager.conf' for changes...
Oct 17 14:00:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:06 IQ138000 wb-rules[4642]: INFO: all rule files are loaded
Oct 17 14:00:06 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 193]
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:193:holding: 275> <-- 0 (0x0)
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:193 is connected
Oct 17 14:00:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 14:00:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 14:00:08 IQ138000 npm[3728]: [2025-10-17 14:00:08] info:         z2m: Logging to console, file (filename: log.log)
Oct 17 14:00:08 IQ138000 npm[3728]: [2025-10-17 14:00:08] info:         z2m: Starting Zigbee2MQTT version 2.1.1 (commit #unknown)
Oct 17 14:00:08 IQ138000 npm[3728]: [2025-10-17 14:00:08] info:         z2m: Starting zigbee-herdsman (3.2.5)
Oct 17 14:00:08 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid data size
Oct 17 14:00:09 IQ138000 npm[3728]: [2025-10-17 14:00:09] info:         zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyMOD1","baudRate":115200,"rtscts":false,"autoOpen":false}
Oct 17 14:00:09 IQ138000 npm[3728]: [2025-10-17 14:00:09] info:         zh:zstack:znp: Serialport opened
Oct 17 14:00:09 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 14:00:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 14:00:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 14:00:10 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 17 14:00:10 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 17 14:00:10 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5404 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 14:00:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5401 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:11 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5402 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: zigbee-herdsman started (resumed)
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: 0x00158d00033b5dc6 (0x00158d00033b5dc6): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: 0x00158d0004450311 (0x00158d0004450311): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: 0x00158d0002e28d70 (0x00158d0002e28d70): WSDCGQ01LM - Xiaomi Mi temperature and humidity sensor (EndDevice)
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: 0x00158d0007e48747 (0x00158d0007e48747): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: Currently 4 devices are joined.
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: Connecting to MQTT server at mqtt://localhost
Oct 17 14:00:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 5403 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:12 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m: Connected to MQTT server
Oct 17 14:00:12 IQ138000 npm[3728]: [2025-10-17 14:00:12] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-17 17:00:13.039+00:00
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-17T17:00:13.039Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793055,"cmd_timestamp_ms":1760709613055,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793055,"cmd_timestamp_ms":1760709613055,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-17 17:00:13.252+00:00
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-17T17:00:13.252Z","to":"2025-10-17T22:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793287,"cmd_timestamp_ms":1760709613287,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793287,"cmd_timestamp_ms":1760709613287,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 17 14:00:13 IQ138000 wb-rules[4642]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 17 14:00:13 IQ138000 wb-rules[4642]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 17 14:00:13 IQ138000 wb-rules[4642]: ERROR: [rule error] Error in getting device: Device with given ID doesn't exist
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-17 17:00:13.382+00:00
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-17T17:00:13.382Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793401,"cmd_timestamp_ms":1760709613401,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793401,"cmd_timestamp_ms":1760709613401,"source":"schedule"}
Oct 17 14:00:13 IQ138000 npm[3728]: [2025-10-17 14:00:13] info:         z2m: Started frontend on port 8282
Oct 17 14:00:13 IQ138000 npm[3728]: [2025-10-17 14:00:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d00033b5dc6', payload '{"battery":100,"humidity":44.74,"last_seen":1760219262060,"power_outage_count":35250,"temperature":22.97,"voltage":3075}'
Oct 17 14:00:13 IQ138000 npm[3728]: [2025-10-17 14:00:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0004450311', payload '{"battery":100,"humidity":55.11,"last_seen":1760218940768,"power_outage_count":48745,"temperature":24.36,"voltage":3025}'
Oct 17 14:00:13 IQ138000 npm[3728]: [2025-10-17 14:00:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0002e28d70', payload '{"battery":57,"humidity":82.09,"last_seen":1759282168943,"power_outage_count":52156,"temperature":3.39,"voltage":2935}'
Oct 17 14:00:13 IQ138000 npm[3728]: [2025-10-17 14:00:13] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x00158d0007e48747', payload '{"battery":100,"humidity":47.86,"last_seen":1760219055025,"power_outage_count":25795,"pressure":990.8,"temperature":21.17,"voltage":3005}'
Oct 17 14:00:13 IQ138000 npm[3728]: [2025-10-17 14:00:13] info:         z2m: Zigbee2MQTT started!
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-17 17:00:13.534+00:00
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-17T17:00:13.534Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793559,"cmd_timestamp_ms":1760709613559,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793559,"cmd_timestamp_ms":1760709613559,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: No regulation to perform!
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: No regulation to perform!
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: No regulation to perform!
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: No regulation to perform!
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-17 17:00:13.788+00:00
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-17T17:00:13.788Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793818,"cmd_timestamp_ms":1760709613818,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793818,"cmd_timestamp_ms":1760709613818,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: No regulation to perform!
Oct 17 14:00:13 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:13 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 4.
Oct 17 14:00:13 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 14:00:13 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-17 17:00:13.929+00:00
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-17T17:00:13.929Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793950,"cmd_timestamp_ms":1760709613950,"source":"schedule"}
Oct 17 14:00:13 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709793950,"cmd_timestamp_ms":1760709613950,"source":"schedule"}
Oct 17 14:00:13 IQ138000 knxd[5190]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 17 14:00:13 IQ138000 knxd[5190]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 17 14:00:13 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 14:00:13 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 14:00:13 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {0}[0]
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-17 17:00:14.123+00:00
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-17T17:00:14.123Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709794167,"cmd_timestamp_ms":1760709614167,"source":"schedule"}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709794167,"cmd_timestamp_ms":1760709614167,"source":"schedule"}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {0}[0]
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-17 17:00:14.448+00:00
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-17T17:00:14.448Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709794464,"cmd_timestamp_ms":1760709614464,"source":"schedule"}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760709794464,"cmd_timestamp_ms":1760709614464,"source":"schedule"}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-17 17:00:14.851+00:00
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-17T17:00:14.851Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760709794870,"cmd_timestamp_ms":1760709614870,"source":"schedule"}
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760709794870,"cmd_timestamp_ms":1760709614870,"source":"schedule"}
Oct 17 14:00:14 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:14 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-17 17:00:15.045+00:00
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-17T17:00:15.045Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760709795060,"cmd_timestamp_ms":1760709615060,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760709795060,"cmd_timestamp_ms":1760709615060,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 17 14:00:15 IQ138000 wb-watchdog[5233]: [INFO] Interval #2 started. Waiting up to 60 seconds for error...
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-17 17:00:15.343+00:00
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-17T17:00:15.343Z","to":"2025-10-17T22:05:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760709795357,"cmd_timestamp_ms":1760709615357,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760709795357,"cmd_timestamp_ms":1760709615357,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-17 17:00:15.480+00:00
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-17T17:00:15.480Z","to":"2025-10-18T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760709795493,"cmd_timestamp_ms":1760709615493,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760709795493,"cmd_timestamp_ms":1760709615493,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-17 17:00:15.648+00:00
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-17T17:00:15.648Z","to":"2025-10-18T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760709795656,"cmd_timestamp_ms":1760709615656,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760709795656,"cmd_timestamp_ms":1760709615656,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-17 17:00:15.809+00:00
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-17T17:00:15.809Z","to":"2025-10-17T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760709795819,"cmd_timestamp_ms":1760709615819,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760709795819,"cmd_timestamp_ms":1760709615819,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-17 17:00:15.945+00:00
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-17T17:00:15.945Z","to":"2025-10-17T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760709795958,"cmd_timestamp_ms":1760709615958,"source":"schedule"}
Oct 17 14:00:15 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760709795958,"cmd_timestamp_ms":1760709615958,"source":"schedule"}
Oct 17 14:00:15 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 17 14:00:16 IQ138000 systemd[1]: iqnergy-software-installer.service: Scheduled restart job, restart counter is at 1.
Oct 17 14:00:16 IQ138000 systemd[1]: Stopped "Package for self install & migrate IQnergy software".
Oct 17 14:00:16 IQ138000 systemd[1]: Starting "Package for self install & migrate IQnergy software"...
Oct 17 14:00:16 IQ138000 systemd[1]: Started "Package for self install & migrate IQnergy software".
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 17 14:00:16 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 17 14:00:17 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:18 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:19 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:20 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:21 IQ138000 wb-mqtt-serial[1707]: WARNING: </dev/ttyRS485-1 9600 8 N 2>: closed due to repetitive errors
Oct 17 14:00:21 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:22 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:22 IQ138000 ModemManager[492]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 17 14:00:22 IQ138000 ModemManager[492]: <info>  [base-manager] modem for device 'wbc' successfully created
Oct 17 14:00:23 IQ138000 ModemManager[492]: <warn>  [modem0] couldn't load supported modes: Couldn't retrieve supported modes
Oct 17 14:00:23 IQ138000 ModemManager[492]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 17 14:00:23 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:23 IQ138000 ModemManager[492]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 17 14:00:23 IQ138000 ModemManager[492]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 17 14:00:24 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5.
Oct 17 14:00:24 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 14:00:24 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 14:00:24 IQ138000 ModemManager[492]: <warn>  [modem0/sim0] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 17 14:00:24 IQ138000 knxd[5396]: WirenboardKNX: E00000064: [19:router] router: setup router: failed
Oct 17 14:00:24 IQ138000 knxd[5396]: WirenboardKNX: F00000105: [12:server] Link down, terminating
Oct 17 14:00:24 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 14:00:24 IQ138000 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 14:00:24 IQ138000 systemd[1]: knxd.service: Failed with result 'exit-code'.
Oct 17 14:00:24 IQ138000 ModemManager[492]: <warn>  [modem0/sim0] couldn't load GID1: SIM failure
Oct 17 14:00:24 IQ138000 ModemManager[492]: <warn>  [modem0/sim0] couldn't load GID2: SIM failure
Oct 17 14:00:24 IQ138000 python3[1999]: Ошибка при выполнении команды mmcli -m wbc: error: couldn't find modem
Oct 17 14:00:24 IQ138000 ModemManager[492]: <info>  [modem0] state changed (unknown -> disabled)
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7346] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/11)
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7399] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7427] device (ttyUSB1): modem state 'enabling'
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7481] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7502] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7546] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7554] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:24 IQ138000 NetworkManager[404]: <info>  [1760709624.7591] manager: NetworkManager state is now CONNECTING
Oct 17 14:00:24 IQ138000 ModemManager[492]: <info>  [modem0] state changed (disabled -> enabling)
Oct 17 14:00:24 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 17 14:00:24 IQ138000 ModemManager[492]: <info>  [modem0] power state updated: on
Oct 17 14:00:25 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 14:00:25 IQ138000 python3[1999]:    --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 14:00:25 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 14:00:25 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 14:00:25 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 14:00:25 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 14:00:25 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 14:00:25 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 14:00:25 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 14:00:25 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 14:00:25 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 14:00:25 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 14:00:25 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 14:00:25 IQ138000 python3[1999]:            |                state: enabling
Oct 17 14:00:25 IQ138000 python3[1999]:            |          power state: on
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 14:00:25 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 14:00:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:25 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 14:00:25 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 14:00:25 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 14:00:25 IQ138000 python3[1999]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 17 14:00:25 IQ138000 python3[1999]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 17 14:00:25 IQ138000 python3[1999]:  successfully requested primary SIM switch in modem
Oct 17 14:00:27 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 1.
Oct 17 14:00:27 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 17 14:00:27 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 17 14:00:27 IQ138000 lsyncd[5442]: 14:00:27 Normal: --- Startup ---
Oct 17 14:00:27 IQ138000 lsyncd[5442]: 14:00:27 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 17 14:00:27 IQ138000 lsyncd[5442]: messages
Oct 17 14:00:27 IQ138000 lsyncd[5442]: journal
Oct 17 14:00:27 IQ138000 lsyncd[5442]: iq_network_manager/iq_network_manager.log
Oct 17 14:00:28 IQ138000 lsyncd[5444]: ssh: Could not resolve hostname adler.iqnergy.com: Name or service not known
Oct 17 14:00:28 IQ138000 lsyncd[5443]: rsync: connection unexpectedly closed (0 bytes received so far) [sender]
Oct 17 14:00:28 IQ138000 lsyncd[5443]: rsync error: unexplained error (code 255) at io.c(228) [sender=3.2.3]
Oct 17 14:00:28 IQ138000 lsyncd[5442]: 14:00:27 Error: Temporary or permanent failure on startup of "/var/log/p7/usr/bin/iqnergy/". Terminating since "insist" is not set.
Oct 17 14:00:28 IQ138000 systemd[1]: lsyncd.service: Main process exited, code=exited, status=255/EXCEPTION
Oct 17 14:00:28 IQ138000 systemd[1]: lsyncd.service: Failed with result 'exit-code'.
Oct 17 14:00:28 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Command: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760709808071,"cmd_timestamp_ms":1760709628071,"source":"regulation"}
Oct 17 14:00:28 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760709808071,"cmd_timestamp_ms":1760709628071,"source":"regulation"}
Oct 17 14:00:28 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Command: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760709808300,"cmd_timestamp_ms":1760709628300,"source":"regulation"}
Oct 17 14:00:28 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[1]]},"expiration_stamp_ms":1760709808300,"cmd_timestamp_ms":1760709628300,"source":"regulation"}
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] state changed (enabling -> enabled)
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] 3GPP registration state changed (unknown -> registering)
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] 3GPP registration state changed (registering -> home)
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] state changed (enabled -> registered)
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] simple connect started...
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] simple connect state (6/10): register
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] simple connect state (7/10): wait to get packet service state attached
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] simple connect state (8/10): bearer
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] simple connect state (9/10): connect
Oct 17 14:00:28 IQ138000 ModemManager[492]: <info>  [modem0] state changed (registered -> connecting)
Oct 17 14:00:29 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {1}[0]
Oct 17 14:00:29 IQ138000 ModemManager[492]: <info>  [modem0] state changed (connecting -> connected)
Oct 17 14:00:29 IQ138000 ModemManager[492]: <info>  [modem0] simple connect state (10/10): all done
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.1296] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.1311] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.1353] loaded PPP plugin /usr/lib/arm-linux-gnueabihf/NetworkManager/1.42.4/libnm-ppp-plugin.so
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.1376] ppp-manager: starting PPP connection
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.1508] ppp-manager: pppd started with pid 5457
Oct 17 14:00:29 IQ138000 pppd[5457]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: initializing
Oct 17 14:00:29 IQ138000 pppd[5457]: pppd 2.4.9 started by root, uid 0
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 17 14:00:29 IQ138000 pppd[5457]: Using interface ppp0
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: Using interface ppp0
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 17 14:00:29 IQ138000 pppd[5457]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.2160] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/12)
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: got credentials from NetworkManager
Oct 17 14:00:29 IQ138000 pppd[5457]: PAP authentication succeeded
Oct 17 14:00:29 IQ138000 pppd[5457]: kernel does not support PPP filtering
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: status 8 / phase 'network'
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: PAP authentication succeeded
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: kernel does not support PPP filtering
Oct 17 14:00:29 IQ138000 kernel: PPP BSD Compression module registered
Oct 17 14:00:29 IQ138000 kernel: PPP Deflate Compression module registered
Oct 17 14:00:29 IQ138000 wb-rules[4642]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {1}[0]
Oct 17 14:00:29 IQ138000 ModemManager[492]: <info>  [modem0] mobile equipment request to activate context (cid 3)
Oct 17 14:00:29 IQ138000 pppd[5457]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 17 14:00:29 IQ138000 pppd[5457]: local  IP address 10.202.46.158
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: local  IP address 10.202.46.158
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: remote IP address 10.64.64.64
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: primary   DNS address 172.23.10.131
Oct 17 14:00:29 IQ138000 NetworkManager[5457]: secondary DNS address 172.23.10.130
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: status 9 / phase 'running'
Oct 17 14:00:29 IQ138000 pppd[5457]: remote IP address 10.64.64.64
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.8357] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 14:00:29 IQ138000 pppd[5457]: primary   DNS address 172.23.10.131
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.8404] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 17 14:00:29 IQ138000 pppd[5457]: secondary DNS address 172.23.10.130
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: ip-up event
Oct 17 14:00:29 IQ138000 pppd[5457]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.8746] ppp-manager: (IPv4 Config Get) reply received.
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.8779] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:29 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Command: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760709809882,"cmd_timestamp_ms":1760709629882,"source":"regulation"}
Oct 17 14:00:29 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760709809882,"cmd_timestamp_ms":1760709629882,"source":"regulation"}
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.9008] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 17 14:00:29 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.resolve1' unit='dbus-org.freedesktop.resolve1.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 14:00:29 IQ138000 dbus-daemon[300]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.resolve1.service': Unit dbus-org.freedesktop.resolve1.service not found.
Oct 17 14:00:29 IQ138000 NetworkManager[404]: <info>  [1760709629.9612] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:29 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 14:00:30 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 17 14:00:30 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 17 14:00:30 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 17 14:00:30 IQ138000 NetworkManager[404]: <info>  [1760709630.0660] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:30 IQ138000 NetworkManager[404]: <info>  [1760709630.0676] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 17 14:00:30 IQ138000 NetworkManager[404]: <info>  [1760709630.0710] manager: NetworkManager state is now CONNECTED_SITE
Oct 17 14:00:30 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Command: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760709810070,"cmd_timestamp_ms":1760709630070,"source":"regulation"}
Oct 17 14:00:30 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760709810070,"cmd_timestamp_ms":1760709630070,"source":"regulation"}
Oct 17 14:00:30 IQ138000 NetworkManager[404]: <info>  [1760709630.0773] device (ttyUSB1): Activation: successful, device activated.
Oct 17 14:00:30 IQ138000 NetworkManager[404]: <info>  [1760709630.0879] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 17 14:00:30 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Command: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760709810365,"cmd_timestamp_ms":1760709630365,"source":"regulation"}
Oct 17 14:00:30 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[[0]]},"expiration_stamp_ms":1760709810365,"cmd_timestamp_ms":1760709630365,"source":"regulation"}
Oct 17 14:00:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:30 IQ138000 vnstatd[1684]: Info: Interface "ppp0" enabled.
Oct 17 14:00:30 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Execute: ch_infrared: {0}[0]
Oct 17 14:00:31 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Execute: ch_infrared: {0}[0]
Oct 17 14:00:31 IQ138000 ntpd[1679]: Listen normally on 4 ppp0 10.202.46.158:123
Oct 17 14:00:31 IQ138000 ntpd[1679]: new interface(s) found: waking up resolver
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-rules[4642]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Execute: ch_infrared: {0}[0]
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [register handler] failed to write: <</dev/ttyRS485-2 9600 8 N 2> modbus:208:coil: 5100>: Serial protocol error: request timed out
Oct 17 14:00:34 IQ138000 ntpd[1679]: Soliciting pool server 51.250.35.68
Oct 17 14:00:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 14:00:34 IQ138000 systemd[1]: knxd.service: Scheduled restart job, restart counter is at 6.
Oct 17 14:00:34 IQ138000 systemd[1]: Stopped KNX Daemon.
Oct 17 14:00:34 IQ138000 systemd[1]: Starting KNX Daemon...
Oct 17 14:00:34 IQ138000 systemd[1]: Started KNX Daemon.
Oct 17 14:00:34 IQ138000 wb-mqtt-knx[2042]: INFO: knxd connected successfully
Oct 17 14:00:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:35 IQ138000 ntpd[1679]: Soliciting pool server 192.36.143.130
Oct 17 14:00:35 IQ138000 ntpd[1679]: Soliciting pool server 46.160.198.122
Oct 17 14:00:35 IQ138000 ntpd[1679]: Soliciting pool server 45.90.217.6
Oct 17 14:00:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:35 IQ138000 python3[1999]: Выполнение: mmcli -i any
Oct 17 14:00:35 IQ138000 python3[1999]: Команда "mmcli -i any" выполнена. Результат:
Oct 17 14:00:35 IQ138000 python3[1999]:    -------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 14:00:35 IQ138000 python3[1999]:   -------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 14:00:35 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 14:00:35 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 14:00:35 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 14:00:35 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 14:00:35 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 14:00:35 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 14:00:35 IQ138000 python3[1999]:    --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 14:00:35 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 14:00:35 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 14:00:35 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 14:00:35 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 14:00:35 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 14:00:35 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 14:00:35 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 14:00:35 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 14:00:35 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 14:00:35 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 14:00:35 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 14:00:35 IQ138000 python3[1999]:            |                state: connected
Oct 17 14:00:35 IQ138000 python3[1999]:            |          power state: on
Oct 17 14:00:35 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 14:00:35 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 14:00:35 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 14:00:35 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 14:00:35 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 14:00:35 IQ138000 python3[1999]:            |         registration: home
Oct 17 14:00:35 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 14:00:35 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 14:00:35 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 14:00:35 IQ138000 python3[1999]: Current state: home
Oct 17 14:00:35 IQ138000 python3[1999]: SIM registered in the network.
Oct 17 14:00:35 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 14:00:35 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 14:00:35 IQ138000 python3[1999]:    --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 14:00:35 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 14:00:35 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 14:00:35 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 14:00:35 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 14:00:35 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 14:00:35 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 14:00:35 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 14:00:35 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 14:00:35 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 14:00:35 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 14:00:35 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 14:00:35 IQ138000 python3[1999]:            |                state: connected
Oct 17 14:00:35 IQ138000 python3[1999]:            |          power state: on
Oct 17 14:00:35 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 14:00:35 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 14:00:35 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 14:00:35 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 14:00:35 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 14:00:35 IQ138000 python3[1999]:            |         registration: home
Oct 17 14:00:35 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 14:00:35 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 14:00:35 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 14:00:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 14:00:35 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 14:00:35 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 14:00:36 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 14:00:36 IQ138000 python3[1999]:    -------------------------------
Oct 17 14:00:36 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 14:00:36 IQ138000 python3[1999]:   -------------------------------
Oct 17 14:00:36 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 14:00:36 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 14:00:36 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 14:00:36 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 14:00:36 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 14:00:36 IQ138000 ntpd[1679]: Soliciting pool server 51.250.110.169
Oct 17 14:00:36 IQ138000 ntpd[1679]: Soliciting pool server 188.68.222.140
Oct 17 14:00:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 14:00:36 IQ138000 ntpd[1679]: Soliciting pool server 91.207.136.55
Oct 17 14:00:37 IQ138000 ntpd[1679]: Soliciting pool server 92.255.126.22
Oct 17 14:00:37 IQ138000 ntpd[1679]: Soliciting pool server 92.255.126.17
Oct 17 14:00:37 IQ138000 ntpd[1679]: Soliciting pool server 162.159.200.1
Oct 17 14:00:38 IQ138000 ntpd[1679]: Soliciting pool server 151.0.2.53
Oct 17 14:00:38 IQ138000 ntpd[1679]: Soliciting pool server 151.0.2.54
Oct 17 14:00:39 IQ138000 ntpd[1679]: Soliciting pool server 162.159.200.123
Oct 17 14:00:40 IQ138000 ntpd[1679]: Soliciting pool server 2a02:6bf:f000:1:3::18
Oct 17 14:00:41 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 14:00:41 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 17 15:16:01 IQ138000 ntpd[1679]: receive: Unexpected origin timestamp 0xec9cca89.1750da45 does not match aorg 0000000000.00000000 from server@51.250.110.169 xmt 0xec9cdc31.14815028
Oct 17 15:16:01 IQ138000 wb-mqtt-knx[2042]: WARNING: [mqtt] connection lost
Oct 17 15:16:01 IQ138000 wb-mqtt-logs[2054]: WARNING: [mqtt] connection lost
Oct 17 15:16:01 IQ138000 wb-mqtt-w1[4530]: WARNING: [mqtt] connection lost
Oct 17 15:16:01 IQ138000 wb-mqtt-nm-helper[2088]: WARNING:root:Mosquitto was disconnected
Oct 17 15:16:01 IQ138000 wb-device-manager[2011]: [WARNING] Mqtt: disconnect from unix:///var/run/mosquitto/mosquitto.sock -> 1
Oct 17 15:16:01 IQ138000 wb-mqtt-db[2031]: WARNING: [mqtt] connection lost
Oct 17 15:16:01 IQ138000 wb-mqtt-adc[3101]: WARNING: [mqtt] connection lost
Oct 17 15:16:01 IQ138000 /usr/bin/wb-metrics[2074]: Unexpected disconnection.
Oct 17 15:16:01 IQ138000 wb-mqtt-gpio[1819]: WARNING: [mqtt] connection lost
Oct 17 15:16:01 IQ138000 wb-mqtt-confed[2024]: WARNING: [wbgo_mqtt] MQTT connection lost: EOF
Oct 17 15:16:01 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:01 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:01 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:01 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:01 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:01 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:01 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:01 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:01 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:01 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:01 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:01 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:01 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:01 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:01 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:01 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:01 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:01 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:01 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:01 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:01 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:01 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:01 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:01 IQ138000 systemd[1]: config-manager.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:01 IQ138000 wb-mqtt-confed[2024]: WARNING: [wbgo_mqtt] Cleaning up token queue
Oct 17 15:16:01 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:01 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:01 IQ138000 python3[1999]: Disconnect returned result: Out of memory.
Oct 17 15:16:01 IQ138000 systemd[1]: config-manager.service: Failed with result 'exit-code'.
Oct 17 15:16:01 IQ138000 ntpd[1679]: receive: Unexpected origin timestamp 0xec9cca89.17578587 does not match aorg 0000000000.00000000 from server@192.36.143.130 xmt 0xec9cdc31.1622fac5
Oct 17 15:16:01 IQ138000 systemd[1]: rules-preprocessor.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:01 IQ138000 wb-rules[4642]: WARNING: [wbgo_mqtt] MQTT connection lost: EOF
Oct 17 15:16:01 IQ138000 systemd[1]: rules-preprocessor.service: Failed with result 'exit-code'.
Oct 17 15:16:01 IQ138000 wb-rules[4642]: WARNING: [wbgo_mqtt] Cleaning up token queue
Oct 17 15:16:01 IQ138000 systemd[1]: health-monitor.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:01 IQ138000 wb-rules[4642]: WARNING: [wbgo_mqtt] MQTT connection lost: EOF
Oct 17 15:16:01 IQ138000 systemd[1]: health-monitor.service: Failed with result 'exit-code'.
Oct 17 15:16:01 IQ138000 wb-rules[4642]: WARNING: [wbgo_mqtt] Cleaning up token queue
Oct 17 15:16:01 IQ138000 systemd[1]: usr-cmd-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:01 IQ138000 wb-mqtt-confed[2024]: INFO: [wbgo_mqtt] confed-IQ138000-2024: MQTT connection established
Oct 17 15:16:01 IQ138000 systemd[1]: usr-cmd-handler.service: Failed with result 'exit-code'.
Oct 17 15:16:01 IQ138000 ntpd[1679]: receive: Unexpected origin timestamp 0xec9cca89.17417ac9 does not match aorg 0000000000.00000000 from server@162.159.200.1 xmt 0xec9cdc31.19af27de
Oct 17 15:16:01 IQ138000 systemd[1]: zigbee-available-emulator.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:01 IQ138000 wb-rules[4642]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-4642: MQTT connection established
Oct 17 15:16:01 IQ138000 systemd[1]: zigbee-available-emulator.service: Failed with result 'exit-code'.
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:01 IQ138000 wb-rules[4642]: INFO: [wbgo_mqtt] rules-IQ138000-4642: MQTT connection established
Oct 17 15:16:01 IQ138000 systemd[1]: data-handler.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:01 IQ138000 systemd[1]: data-handler.service: Failed with result 'exit-code'.
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:01 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:01 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:01 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:01 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:01 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:01 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:01 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:01 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:01 IQ138000 wb-watchdog[5648]: [INFO] Interval #3 started. Waiting up to 60 seconds for error...
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:02 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 15:16:02 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 15:16:02 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 7)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 15:16:02 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 8)
Oct 17 15:16:02 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 15:16:02 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] subscription succeeded (message id 17)
Oct 17 15:16:02 IQ138000 wb-mqtt-knx[2042]: INFO: [mqtt] subscription succeeded (message id 18)
Oct 17 15:16:02 IQ138000 wb-mqtt-adc[3101]: INFO: [mqtt] subscription succeeded (message id 303)
Oct 17 15:16:02 IQ138000 wb-mqtt-logs[2054]: INFO: [mqtt] subscription succeeded (message id 9)
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Mosquitto was connected
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 462)
Oct 17 15:16:02 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] connection estabilished with code "0" <success>
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1
Oct 17 15:16:02 IQ138000 wb-device-manager[2011]: [INFO] Mqtt: reconnect to unix:///var/run/mosquitto/mosquitto.sock -> 0
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 463)
Oct 17 15:16:02 IQ138000 wb-mqtt-w1[4530]: INFO: [mqtt] subscription succeeded (message id 14)
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device wb-debug 0f098677-2b49-4167-a534-207567b1751b /org/freedesktop/NetworkManager/Settings/2
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 75)
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 76)
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 77)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 464)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 465)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 466)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 467)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 468)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 469)
Oct 17 15:16:02 IQ138000 python3[1999]: Connection returned result: Connection Accepted.
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 78)
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 79)
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 80)
Oct 17 15:16:02 IQ138000 wb-mqtt-gpio[1819]: INFO: [mqtt] subscription succeeded (message id 81)
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device wb-eth0 91f1c71d-2d97-4675-886f-ecbe52b8451e /org/freedesktop/NetworkManager/Settings/3
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 470)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 471)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 472)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 473)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 474)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 475)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 476)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 477)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 478)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 479)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 480)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 481)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 482)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 483)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 484)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 485)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 486)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 487)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 488)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 489)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 npm[3728]: [2025-10-17 15:16:02] info:         z2m: Connected to MQTT server
Oct 17 15:16:02 IQ138000 npm[3728]: [2025-10-17 15:16:02] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 490)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 491)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 492)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 493)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 494)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 495)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 496)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 497)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 498)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 499)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 500)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 501)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 502)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 503)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 504)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 505)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 506)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 507)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 508)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 509)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 510)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 511)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 512)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 513)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 514)
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device wb-eth1 c3e38405-9c17-4155-ad70-664311b49066 /org/freedesktop/NetworkManager/Settings/5
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 515)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 516)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 517)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 518)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 519)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 520)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 521)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 522)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 523)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 524)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 525)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 526)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 527)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 528)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 529)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 530)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 531)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 532)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 533)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 534)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 535)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 536)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 537)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 538)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 539)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 540)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 541)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 542)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 543)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 544)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 545)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 546)
Oct 17 15:16:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Republish virtual device lo 588475cb-51ff-4c67-baa4-eb9d4d4d8540 /org/freedesktop/NetworkManager/Settings/7
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 547)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 548)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 549)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 550)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 551)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 552)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 553)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 554)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 555)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 556)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 557)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 558)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 559)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 560)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 561)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 562)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 563)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 564)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 565)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 566)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 567)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 568)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 569)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 570)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 571)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 572)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 573)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 574)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 575)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 576)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 577)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 578)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 579)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 580)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 581)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 582)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 583)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 584)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 585)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 586)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 587)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 588)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 589)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 590)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 591)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 592)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 593)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 594)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 595)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 596)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 597)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 598)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 599)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 600)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 601)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 602)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 603)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 604)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 605)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 606)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 607)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 608)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 609)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 610)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 611)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 612)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 613)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 614)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 615)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 616)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 617)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 618)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 619)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 620)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 621)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 622)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 623)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 624)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 625)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 626)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 627)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 628)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 629)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 630)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 631)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 632)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 633)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 634)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 635)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 636)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 637)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 638)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 639)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 640)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 641)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 642)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 643)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 644)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 645)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 646)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 647)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 648)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 649)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 650)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 651)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 652)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 653)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 654)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 655)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 656)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 657)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 658)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 659)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 660)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 661)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 662)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 663)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 664)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 665)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 666)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 667)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 668)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 669)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 670)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 671)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 672)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 673)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 674)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 675)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 676)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 677)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 678)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 679)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 680)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 681)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 682)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 683)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 684)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 685)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 686)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 687)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 688)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 689)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 690)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 691)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 692)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 693)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 694)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 695)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 696)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 697)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 698)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 699)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 700)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 701)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 702)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 703)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 704)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 705)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 706)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 707)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 708)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 709)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 710)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 711)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 712)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 713)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 714)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 715)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 716)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 717)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 718)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 719)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 720)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 721)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 722)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 723)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 724)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 725)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 726)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 727)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 728)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 729)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 730)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 731)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 732)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 733)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 734)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 735)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 736)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 737)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 738)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 739)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 740)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 741)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 742)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 743)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 744)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 745)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 746)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 747)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 748)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 749)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 750)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 751)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 752)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 753)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 754)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 755)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 756)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 757)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 758)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 759)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 760)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 761)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 762)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 763)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 764)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 765)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 766)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 767)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 768)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 769)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 770)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 771)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 772)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 773)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 774)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 775)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 776)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 777)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 778)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 779)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 780)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 781)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 782)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 783)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 784)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 785)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 786)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 787)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 788)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 789)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 790)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 791)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 792)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 793)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 794)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 795)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 796)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 797)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 798)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 799)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 800)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 801)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 802)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 803)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 804)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 805)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 806)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 807)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 808)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 809)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 810)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 811)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 812)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 813)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 814)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 815)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 816)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 817)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 818)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 819)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 820)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 821)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 822)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 823)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 824)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 825)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 826)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 827)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 828)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 829)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 830)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 831)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 832)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 833)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 834)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 835)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 836)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 837)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 838)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 839)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 840)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 841)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 842)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 843)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 844)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 845)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 846)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 847)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 848)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 849)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 850)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 851)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 852)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 853)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 854)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 855)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 856)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 857)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 858)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 859)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 860)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 861)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 862)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 863)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 864)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 865)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 866)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 867)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 868)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 869)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 870)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 871)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 872)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 873)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 874)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 875)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 876)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 877)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 878)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 879)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 880)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 881)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 882)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 883)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 884)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 885)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 886)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 887)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 888)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 889)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 890)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 891)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 892)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 893)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 894)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 895)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 896)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 897)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 898)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 899)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 900)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 901)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 902)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 903)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 904)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 905)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 906)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 907)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 908)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 909)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 910)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 911)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 912)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 913)
Oct 17 15:16:02 IQ138000 wb-mqtt-db[2031]: INFO: [mqtt] subscription succeeded (message id 914)
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 17 15:16:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:115: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 python3[1999]: OLD SETTINGS: None
Oct 17 15:16:04 IQ138000 python3[1999]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 17 15:16:04 IQ138000 python3[1999]: New settings applied
Oct 17 15:16:04 IQ138000 do-upgrade.sh[2059]: 1760714153
Oct 17 15:16:04 IQ138000 reverse-ssh.sh[3212]: push 1
Oct 17 15:16:04 IQ138000 reverse-ssh.sh[3212]: push 2
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 reverse-ssh.sh[3212]: push 3
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 17 15:16:04 IQ138000 python3[5695]: Connection 'LegacyWiFi' does not exist.
Oct 17 15:16:04 IQ138000 python3[5708]: {
Oct 17 15:16:04 IQ138000 python3[5708]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 17 15:16:04 IQ138000 python3[5708]:     "tiers": {
Oct 17 15:16:04 IQ138000 python3[5708]:         "high": [
Oct 17 15:16:04 IQ138000 python3[5708]:             "wb-eth0",
Oct 17 15:16:04 IQ138000 python3[5708]:             "ServiceAP"
Oct 17 15:16:04 IQ138000 python3[5708]:         ],
Oct 17 15:16:04 IQ138000 python3[5708]:         "low": [
Oct 17 15:16:04 IQ138000 python3[5708]:             "wb-gsm-sim1",
Oct 17 15:16:04 IQ138000 python3[5708]:             "wb-gsm-sim2"
Oct 17 15:16:04 IQ138000 python3[5708]:         ],
Oct 17 15:16:04 IQ138000 python3[5708]:         "medium": []
Oct 17 15:16:04 IQ138000 python3[5708]:     },
Oct 17 15:16:04 IQ138000 python3[5708]:     "debug": false
Oct 17 15:16:04 IQ138000 python3[5708]: }
Oct 17 15:16:04 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:16:04 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:16:04 IQ138000 python3[1999]: COMMAND "systemctl is-active wb-connection-manager" exited with 3
Oct 17 15:16:04 IQ138000 python3[1999]: [stdout]
Oct 17 15:16:04 IQ138000 python3[1999]: "inactive
Oct 17 15:16:04 IQ138000 python3[1999]: "
Oct 17 15:16:04 IQ138000 python3[1999]: Service wb-connection-manager is not active. No action taken.
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:05 IQ138000 reverse-ssh.sh[3212]: push 4
Oct 17 15:16:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:05 IQ138000 reverse-ssh.sh[3212]: push 5
Oct 17 15:16:05 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Device wb-mao4_48/Channel 1 in error. Unable to push command.
Oct 17 15:16:05 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Device wb-mao4_48/Channel 2 in error. Unable to push command.
Oct 17 15:16:05 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Device wb-mr6c_108/K1 in error. Unable to push command.
Oct 17 15:16:05 IQ138000 wb-rules[4642]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Device wb-mr6c_108/K2 in error. Unable to push command.
Oct 17 15:16:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:06 IQ138000 reverse-ssh.sh[5727]: kex_exchange_identification: Connection closed by remote host
Oct 17 15:16:06 IQ138000 reverse-ssh.sh[5727]: Connection closed by 45.89.26.233 port 22
Oct 17 15:16:06 IQ138000 reverse-ssh.sh[5729]: Error: Unknown option '1'.
Oct 17 15:16:06 IQ138000 reverse-ssh.sh[5729]: Use 'mosquitto_pub --help' to see usage.
Oct 17 15:16:06 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:16:06 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 17 15:16:06 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:06 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:06 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:06 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:06 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:06 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:06 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:06 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:06 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:06 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:06 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:06 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:06 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:06 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:06 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:06 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:06 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:06 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:06 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:06 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:06 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:06 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:06 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:06 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:06 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:06 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 15:16:06 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:06 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:06 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:06 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:06 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:06 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:06 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:06 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 17 15:16:08 IQ138000 do-upgrade.sh[2059]: 1760714168
Oct 17 15:16:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 17 15:16:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:11 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:11 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:11 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:11 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:11 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:11 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:11 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:11 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:11 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:11 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:11 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:11 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:11 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:11 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:11 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:11 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:11 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:11 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:11 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:11 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:11 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:11 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:11 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:11 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:11 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:11 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:11 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:11 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:11 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:11 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:11 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:11 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:11 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:11 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:14 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 15:16:14 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 17 15:16:14 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 17 15:16:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 15:16:16 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 3.
Oct 17 15:16:16 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 17 15:16:16 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 17 15:16:16 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 17 15:16:16 IQ138000 reverse-ssh.sh[5880]: push 4
Oct 17 15:16:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:16 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:16 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:16 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:16 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:16 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:16 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:16 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:16 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:16 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:16 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:16 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:16 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:16 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:16 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:16 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:16 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:16 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:16 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:16 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:16 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:16 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:16 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:16 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:16 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:16 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:17 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:17 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:17 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:17 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:17 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:17 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:17 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:17 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:17 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:17 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:17 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:17 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:17 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:17 IQ138000 reverse-ssh.sh[5880]: push 5
Oct 17 15:16:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:20 IQ138000 reverse-ssh.sh[5880]: push 1
Oct 17 15:16:20 IQ138000 reverse-ssh.sh[5880]: push 2
Oct 17 15:16:21 IQ138000 reverse-ssh.sh[5880]: push 3
Oct 17 15:16:22 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:22 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:22 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:22 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:22 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:22 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:22 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:22 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:22 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:22 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:22 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:22 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:22 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:22 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:22 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:22 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:22 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:22 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:22 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:22 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:22 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:22 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:22 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:22 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:22 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:22 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:22 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:22 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:22 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:22 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:22 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:22 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:22 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:22 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L2, row count 7183, limit 7042
Oct 17 15:16:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 15:16:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:27 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:27 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:27 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:27 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:27 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:27 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:27 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:27 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:27 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:27 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:27 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:27 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:27 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:27 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:27 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:27 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:27 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:27 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:27 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:27 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:27 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:27 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:27 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:27 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:27 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:27 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 17 15:16:27 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:27 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:27 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:27 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:27 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:27 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:27 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:27 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 15:16:30 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 17 15:16:30 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 17 15:16:30 IQ138000 wb-mqtt-serial[1707]: WARNING: </dev/ttyRS485-1 9600 8 N 2>: closed due to repetitive errors
Oct 17 15:16:31 IQ138000 systemd[1]: config-manager.service: Scheduled restart job, restart counter is at 2.
Oct 17 15:16:31 IQ138000 systemd[1]: rules-preprocessor.service: Scheduled restart job, restart counter is at 2.
Oct 17 15:16:31 IQ138000 systemd[1]: usr-cmd-handler.service: Scheduled restart job, restart counter is at 1.
Oct 17 15:16:31 IQ138000 systemd[1]: zigbee-available-emulator.service: Scheduled restart job, restart counter is at 1.
Oct 17 15:16:31 IQ138000 systemd[1]: health-monitor.service: Scheduled restart job, restart counter is at 2.
Oct 17 15:16:31 IQ138000 systemd[1]: Stopped Device Configuration Service.
Oct 17 15:16:31 IQ138000 systemd[1]: Starting Device Configuration Service...
Oct 17 15:16:31 IQ138000 systemd[1]: Stopped Health monitor service.
Oct 17 15:16:31 IQ138000 systemd[1]: Starting Health monitor service...
Oct 17 15:16:31 IQ138000 systemd[1]: Stopped User command preprocessor.
Oct 17 15:16:31 IQ138000 systemd[1]: Starting User command preprocessor...
Oct 17 15:16:31 IQ138000 systemd[1]: Stopped User command handler service.
Oct 17 15:16:31 IQ138000 systemd[1]: Starting User command handler service...
Oct 17 15:16:31 IQ138000 systemd[1]: Stopped Zigbee available emulator.
Oct 17 15:16:31 IQ138000 systemd[1]: Starting Zigbee available emulator...
Oct 17 15:16:31 IQ138000 systemd[1]: Started Device Configuration Service.
Oct 17 15:16:31 IQ138000 systemd[1]: Started Health monitor service.
Oct 17 15:16:31 IQ138000 systemd[1]: Started User command preprocessor.
Oct 17 15:16:31 IQ138000 systemd[1]: Started User command handler service.
Oct 17 15:16:31 IQ138000 systemd[1]: Started Zigbee available emulator.
Oct 17 15:16:32 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:32 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:32 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:32 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:32 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:32 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:32 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:32 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:32 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:32 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:32 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:32 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:32 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:32 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:32 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:32 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:32 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:32 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:32 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:32 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:32 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:32 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:32 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:32 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:32 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:32 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:32 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:32 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:32 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:32 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:32 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:32 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:32 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:32 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:37 IQ138000 systemd[1]: Stopping MQTT Rule engine for Wiren Board...
Oct 17 15:16:37 IQ138000 wb-rules[4642]: INFO: [engine] Stopping sync loop
Oct 17 15:16:37 IQ138000 wb-rules[4642]: INFO: [engine] Stop main loop
Oct 17 15:16:37 IQ138000 systemd[1]: wb-rules.service: Succeeded.
Oct 17 15:16:37 IQ138000 systemd[1]: Stopped MQTT Rule engine for Wiren Board.
Oct 17 15:16:37 IQ138000 systemd[1]: wb-rules.service: Consumed 36.166s CPU time.
Oct 17 15:16:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:37 IQ138000 systemd[1]: Started MQTT Rule engine for Wiren Board.
Oct 17 15:16:37 IQ138000 wb-rules[6198]: INFO: broker URL is default and mosquitto socket detected, trying to connect via it
Oct 17 15:16:37 IQ138000 wb-rules[6198]: INFO: driver is created
Oct 17 15:16:37 IQ138000 systemd[1]: Stopped Data collection and transformation service.
Oct 17 15:16:37 IQ138000 wb-rules[6198]: INFO: [wbgo_mqtt] rules-IQ138000-6198: MQTT connection established
Oct 17 15:16:37 IQ138000 wb-rules[6198]: INFO: driver loop is started
Oct 17 15:16:37 IQ138000 wb-rules[6198]: INFO: wait for driver to become ready
Oct 17 15:16:37 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:37 IQ138000 systemd[1]: Starting Data collection and transformation service...
Oct 17 15:16:37 IQ138000 systemd[1]: Started Data collection and transformation service.
Oct 17 15:16:37 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:37 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:37 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:37 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:37 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:37 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:37 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:37 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:37 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:37 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:37 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:37 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:37 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:37 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:37 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:37 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:37 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:37 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:37 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:37 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:37 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:37 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:37 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:37 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:37 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:37 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:37 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:37 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:37 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:37 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:37 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:37 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:37 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:39 IQ138000 wb-rules[6198]: INFO: driver is ready
Oct 17 15:16:39 IQ138000 wb-rules[6198]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Oct 17 15:16:39 IQ138000 wb-rules[6198]: INFO: [wbgo_mqtt] wb-rules-engine-IQ138000-6198: MQTT connection established
Oct 17 15:16:39 IQ138000 wb-rules[6198]: INFO: [engine] Starting main loop
Oct 17 15:16:39 IQ138000 wb-rules[6198]: INFO: the engine is ready
Oct 17 15:16:39 IQ138000 wb-rules[6198]: INFO: [engine] Starting sync loop
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:193: Serial protocol error: request timed out
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 108]
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 6 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 14> <-- 3 (0x3)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: malformed response: invalid data size
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 5 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 13> <-- 3 (0x3)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 4 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 12> <-- 3 (0x3)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 3 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 11> <-- 3 (0x3)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 2 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 10> <-- 3 (0x3)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Safety Timer S: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 8> <-- 3600 (0xe10)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 9> <-- 3 (0x3)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: disable legacy input mode control: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:108:holding: 5> <-- 0 (0x0)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:108 is connected
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial client] Failed to enable events for modbus:108: Serial protocol error: request timed out
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Continuous read enabled [slave_id is 48]
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Output mode: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 10> <-- 1 (0x1)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: PWM frequency: setup register <</dev/ttyRS485-1 9600 8 N 2> modbus:48:holding: 9> <-- 24 (0x18)
Oct 17 15:16:39 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-1 9600 8 N 2> modbus:48 is connected
Oct 17 15:16:40 IQ138000 wb-rules[6198]: WARNING: [rule warning] DAC: no config file
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:coil: 16>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:coil: 17>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:coil: 18>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:coil: 19>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:holding: 16>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:holding: 17>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:holding: 18>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:holding: 19>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 32>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 33>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 34>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 464>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 465>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 466>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 480>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 481>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 482>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 496>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 497>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 498>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 512>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 513>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are enabled for <modbus:48:input: 514>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: INFO: [serial client] Events are disabled for <modbus:48: reboot>
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 15:16:40 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Track 0x00158d0004450311/temperature
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 15:16:40 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Track 0x00158d00033b5dc6/temperature
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 15:16:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:16: Serial protocol error: request timed out
Oct 17 15:16:41 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Track 0x00158d0007e48747/temperature
Oct 17 15:16:41 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Track 0x00158d0004450311/temperature
Oct 17 15:16:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:204: Serial protocol error: request timed out
Oct 17 15:16:41 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Track 0x00158d00033b5dc6/temperature
Oct 17 15:16:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:42 IQ138000 wb-rules[6198]: INFO: all rule files are loaded
Oct 17 15:16:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:42 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:43 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:43 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:43 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:43 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:43 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:43 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:43 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:43 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:43 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:43 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:43 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:43 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:43 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:43 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:43 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:43 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:43 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:43 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:43 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:43 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:43 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:43 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:43 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:43 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:43 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:43 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:43 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:43 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:43 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:43 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:43 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:43 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:43 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5386 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:16:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:16:48 IQ138000 systemd[1]: lsyncd.service: Scheduled restart job, restart counter is at 2.
Oct 17 15:16:48 IQ138000 systemd[1]: Stopped Live Syncing Daemon.
Oct 17 15:16:48 IQ138000 systemd[1]: Started Live Syncing Daemon.
Oct 17 15:16:48 IQ138000 lsyncd[6700]: 15:16:48 Normal: --- Startup ---
Oct 17 15:16:48 IQ138000 lsyncd[6700]: 15:16:48 Normal: recursive startup rsync: /var/log/p7/usr/bin/iqnergy/ -> iqdata@adler.iqnergy.com:/mnt/adler/logs/IQ138000/ excluding
Oct 17 15:16:48 IQ138000 lsyncd[6700]: iq_network_manager/iq_network_manager.log
Oct 17 15:16:48 IQ138000 lsyncd[6700]: journal
Oct 17 15:16:48 IQ138000 lsyncd[6700]: messages
Oct 17 15:16:48 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:48 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:48 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:48 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:48 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:48 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:48 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:48 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:48 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:48 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:48 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:48 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:48 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:48 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:48 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:48 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:48 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:48 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:48 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:48 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:48 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:48 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:48 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:48 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:48 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:48 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:48 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:48 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:48 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:48 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:48 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:48 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:48 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:48 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:48 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Target time: 2025-10-17 18:16:50.389+00:00
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Regulation disabled.
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Entity: {"interval":{"from":"2025-10-17T18:16:50.389Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390423,"cmd_timestamp_ms":1760714210423,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390423,"cmd_timestamp_ms":1760714210423,"source":"schedule"}
Oct 17 15:16:50 IQ138000 lsyncd[6700]: 15:16:50 Normal: Startup of "/var/log/p7/usr/bin/iqnergy/" finished: 0
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Target time: 2025-10-17 18:16:50.542+00:00
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Regulation disabled.
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Entity: {"interval":{"from":"2025-10-17T18:16:50.542Z","to":"2025-10-17T22:10:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390557,"cmd_timestamp_ms":1760714210557,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390557,"cmd_timestamp_ms":1760714210557,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb430: Target time: 2025-10-17 18:16:50.671+00:00
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb430: Regulation disabled.
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb430: Entity: {"interval":{"from":"2025-10-17T18:16:50.671Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb430: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390685,"cmd_timestamp_ms":1760714210685,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb430: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390685,"cmd_timestamp_ms":1760714210685,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb431: Target time: 2025-10-17 18:16:50.766+00:00
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb431: Regulation disabled.
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb431: Entity: {"interval":{"from":"2025-10-17T18:16:50.766Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb431: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390782,"cmd_timestamp_ms":1760714210782,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb431: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390782,"cmd_timestamp_ms":1760714210782,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb432: Target time: 2025-10-17 18:16:50.880+00:00
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb432: Regulation disabled.
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb432: Entity: {"interval":{"from":"2025-10-17T18:16:50.880Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb432: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390895,"cmd_timestamp_ms":1760714210895,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb432: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390895,"cmd_timestamp_ms":1760714210895,"source":"schedule"}
Oct 17 15:16:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb433: Target time: 2025-10-17 18:16:50.983+00:00
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb433: Regulation disabled.
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb433: Entity: {"interval":{"from":"2025-10-17T18:16:50.983Z","to":"2025-10-18T04:30:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 15:16:50 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb433: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390997,"cmd_timestamp_ms":1760714210997,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb433: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714390997,"cmd_timestamp_ms":1760714210997,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Target time: 2025-10-17 18:16:51.118+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Entity: {"interval":{"from":"2025-10-17T18:16:51.118Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714391129,"cmd_timestamp_ms":1760714211129,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714391129,"cmd_timestamp_ms":1760714211129,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Target time: 2025-10-17 18:16:51.257+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Entity: {"interval":{"from":"2025-10-17T18:16:51.257Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Send schedule: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714391270,"cmd_timestamp_ms":1760714211270,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Performing: {"channels":{"ch_power":[[0]]},"expiration_stamp_ms":1760714391270,"cmd_timestamp_ms":1760714211270,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42e: Execute: ch_power: {0}[0]
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Target time: 2025-10-17 18:16:51.492+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Entity: {"interval":{"from":"2025-10-17T18:16:51.492Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760714391505,"cmd_timestamp_ms":1760714211505,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a20ee52d4b239ff3d6: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760714391505,"cmd_timestamp_ms":1760714211505,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb42f: Execute: ch_power: {0}[0]
Oct 17 15:16:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Target time: 2025-10-17 18:16:51.619+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Entity: {"interval":{"from":"2025-10-17T18:16:51.619Z","to":"2025-10-17T23:00:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760714391637,"cmd_timestamp_ms":1760714211637,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d7: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760714391637,"cmd_timestamp_ms":1760714211637,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb430: Execute: ch_power: {0}[0]
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Target time: 2025-10-17 18:16:51.742+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Entity: {"interval":{"from":"2025-10-17T18:16:51.742Z","to":"2025-10-17T22:05:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Send schedule: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760714391753,"cmd_timestamp_ms":1760714211753,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5f0709a30ee52d4b239ff3d8: Performing: {"channels":{"ch_infrared":[]},"expiration_stamp_ms":1760714391753,"cmd_timestamp_ms":1760714211753,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb431: Execute: ch_power: {0}[0]
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Target time: 2025-10-17 18:16:51.858+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Entity: {"interval":{"from":"2025-10-17T18:16:51.858Z","to":"2025-10-18T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760714391871,"cmd_timestamp_ms":1760714211871,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["32"]]},"expiration_stamp_ms":1760714391871,"cmd_timestamp_ms":1760714211871,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb432: Execute: ch_power: {0}[0]
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Target time: 2025-10-17 18:16:51.975+00:00
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Regulation disabled.
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Entity: {"interval":{"from":"2025-10-17T18:16:51.975Z","to":"2025-10-18T00:00:00.000Z"},"meta":{"schedule_type":"individual","hours":"base","day":0,"i":1}}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760714391986,"cmd_timestamp_ms":1760714211986,"source":"schedule"}
Oct 17 15:16:51 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["42"]]},"expiration_stamp_ms":1760714391986,"cmd_timestamp_ms":1760714211986,"source":"schedule"}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6521857de4be60cb433: Execute: ch_power: {0}[0]
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Target time: 2025-10-17 18:16:52.085+00:00
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Regulation disabled.
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Entity: {"interval":{"from":"2025-10-17T18:16:52.085Z","to":"2025-10-17T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760714392095,"cmd_timestamp_ms":1760714212095,"source":"schedule"}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760714392095,"cmd_timestamp_ms":1760714212095,"source":"schedule"}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43a: Execute: ch_power: {0}[0]
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Target time: 2025-10-17 18:16:52.202+00:00
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Regulation disabled.
Oct 17 15:16:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Entity: {"interval":{"from":"2025-10-17T18:16:52.202Z","to":"2025-10-17T23:55:00.000Z"},"meta":{"schedule_type":"common","hours":"base","day":0,"i":0}}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Send schedule: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760714392216,"cmd_timestamp_ms":1760714212216,"source":"schedule"}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Performing: {"channels":{"ch_power":[[0]],"ch_frequency":[["0"]]},"expiration_stamp_ms":1760714392216,"cmd_timestamp_ms":1760714212216,"source":"schedule"}
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 5ddeb6541857de4be60cb43b: Execute: ch_power: {0}[0]
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_power: {0}[0]
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc5: Execute: ch_frequency: {32}[0]
Oct 17 15:16:52 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_frequency: {42}[0]
Oct 17 15:16:53 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc6: Execute: ch_power: {0}[0]
Oct 17 15:16:53 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_frequency: {0}[0]
Oct 17 15:16:53 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc7: Execute: ch_power: {0}[0]
Oct 17 15:16:53 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_frequency: {0}[0]
Oct 17 15:16:53 IQ138000 wb-rules[6198]: INFO: [rule info] 6745dba9822f8f8af10a2bc8: Execute: ch_power: {0}[0]
Oct 17 15:16:53 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:53 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:53 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:53 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:53 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:53 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:53 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:53 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:53 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:53 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:53 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:53 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:53 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:53 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:53 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:53 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:53 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:53 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:53 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:53 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:53 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:53 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:53 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:53 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:53 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:53 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:53 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:53 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:53 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:53 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:53 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:53 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:53 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:53 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:16:58 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:16:58 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:16:58 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:16:58 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:16:58 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:16:58 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:16:58 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:16:58 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:16:58 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:16:58 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:16:58 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:16:58 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:16:58 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:16:58 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:16:58 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:16:58 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:16:58 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:16:58 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:16:58 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:16:58 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:16:58 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:16:58 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:16:58 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:58 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:16:58 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:16:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:16:58 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:58 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:16:58 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:16:58 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:16:58 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:16:58 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:16:58 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:16:58 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:16:58 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:17:01 IQ138000 wb-watchdog[6965]: [INFO] Interval #4 started. Waiting up to 60 seconds for error...
Oct 17 15:17:01 IQ138000 CRON[6967]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 15:17:01 IQ138000 CRON[6971]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 17 15:17:01 IQ138000 CRON[6967]: pam_unix(cron:session): session closed for user root
Oct 17 15:17:03 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:03 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:03 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:17:03 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:03 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:03 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:03 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:03 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:03 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:03 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:03 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:03 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:03 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:03 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:03 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:03 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:03 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:03 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:03 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:03 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:17:03 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:17:03 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:03 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:17:03 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:17:03 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:17:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:17:03 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:17:03 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:17:03 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:17:03 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:03 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:03 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:17:03 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:17:03 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:17:03 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:17:08 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:09 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:09 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/0
Oct 17 15:17:09 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:09 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:09 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:09 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:09 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:09 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:09 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:09 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:09 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:09 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:09 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:09 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:09 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:09 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:09 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:09 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:09 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:17:09 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:17:09 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:09 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:17:09 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/0 (active)
Oct 17 15:17:09 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:17:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0
Oct 17 15:17:09 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:17:09 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/0" выполнена. Результат:
Oct 17 15:17:09 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/0
Oct 17 15:17:09 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:09 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:09 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:17:09 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:17:09 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:17:09 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:17:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:17:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:17:14 IQ138000 python3[1999]: Выполнение: mmcli -m wbc --set-primary-sim-slot=2
Oct 17 15:17:14 IQ138000 ModemManager[492]: <info>  [modem0] mobile equipment forced PS detach: all contexts have been deactivated
Oct 17 15:17:14 IQ138000 ModemManager[492]: <info>  [modem0/bearer0] explicitly disconnected
Oct 17 15:17:14 IQ138000 ModemManager[492]: <info>  [modem0] 3GPP registration state changed (home -> idle)
Oct 17 15:17:14 IQ138000 ModemManager[492]: <info>  [modem0] network request to deactivate context (cid 1)
Oct 17 15:17:14 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:17:14 IQ138000 ModemManager[492]: <info>  [modem0] network request to deactivate context (cid 3)
Oct 17 15:17:14 IQ138000 ModemManager[492]: <info>  [modem0/bearer0] explicitly disconnected
Oct 17 15:17:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:17:15 IQ138000 ModemManager[492]: <warn>  [modem0/bearer0] checking if connected failed: Couldn't check current list of active PDP contexts: Unknown error
Oct 17 15:17:15 IQ138000 pppd[5457]: LCP terminated by peer
Oct 17 15:17:15 IQ138000 pppd[5457]: Connect time 1.5 minutes.
Oct 17 15:17:15 IQ138000 pppd[5457]: nm-ppp-plugin: status 8 / phase 'network'
Oct 17 15:17:15 IQ138000 NetworkManager[5457]: LCP terminated by peer
Oct 17 15:17:15 IQ138000 NetworkManager[5457]: Connect time 1.5 minutes.
Oct 17 15:17:15 IQ138000 NetworkManager[5457]: Sent 349519 bytes, received 1122282 bytes.
Oct 17 15:17:15 IQ138000 pppd[5457]: Sent 349519 bytes, received 1122282 bytes.
Oct 17 15:17:15 IQ138000 NetworkManager[404]: <info>  [1760714235.2539] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 15:17:15 IQ138000 pppd[5457]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 17 15:17:17 IQ138000 ntpd[1679]: Deleting interface #4 *multiple*, 10.202.46.158#123, interface stats: received=102, sent=105, dropped=1, active_time=86 secs
Oct 17 15:17:17 IQ138000 ntpd[1679]: 162.159.200.123 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 151.0.2.53 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 162.159.200.1 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 92.255.126.17 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 92.255.126.22 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 91.207.136.55 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 188.68.222.140 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 51.250.110.169 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 45.90.217.6 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 192.36.143.130 local addr 10.202.46.158 -> <null>
Oct 17 15:17:17 IQ138000 ntpd[1679]: 51.250.35.68 local addr 10.202.46.158 -> <null>
Oct 17 15:17:18 IQ138000 pppd[5457]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 17 15:17:18 IQ138000 pppd[5457]: Connection terminated.
Oct 17 15:17:18 IQ138000 NetworkManager[5457]: Connection terminated.
Oct 17 15:17:18 IQ138000 avahi-daemon[371]: Withdrawing workstation service for ppp0.
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.2652] device (ttyUSB1): state change: activated -> failed (reason 'ppp-disconnect', sys-iface-state: 'managed')
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.2680] manager: NetworkManager state is now DISCONNECTED
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <warn>  [1760714238.2801] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim1'
Oct 17 15:17:18 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 15:17:18 IQ138000 ModemManager[492]: <info>  [modem0] state changed (connected -> disconnecting)
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3169] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:18 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 17 15:17:18 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/3
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3735] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3780] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3790] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3817] manager: NetworkManager state is now CONNECTING
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <warn>  [1760714238.3830] modem-broadband[ttyUSB1]: failed to connect 'wb-gsm-sim1': unable to determine the network id
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3836] device (ttyUSB1): state change: prepare -> failed (reason 'modem-init-failed', sys-iface-state: 'managed')
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3854] manager: NetworkManager state is now DISCONNECTED
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <warn>  [1760714238.3872] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim1'
Oct 17 15:17:18 IQ138000 NetworkManager[404]: <info>  [1760714238.3887] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:18 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 17 15:17:18 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 17 15:17:19 IQ138000 pppd[5457]: Terminating on signal 15
Oct 17 15:17:19 IQ138000 NetworkManager[5457]: Terminating on signal 15
Oct 17 15:17:19 IQ138000 NetworkManager[5457]: Modem hangup
Oct 17 15:17:19 IQ138000 pppd[5457]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 17 15:17:19 IQ138000 pppd[5457]: Modem hangup
Oct 17 15:17:19 IQ138000 pppd[5457]: nm-ppp-plugin: cleaning up
Oct 17 15:17:19 IQ138000 pppd[5457]: Exit.
Oct 17 15:17:19 IQ138000 python3[1999]: Команда "mmcli -m wbc --set-primary-sim-slot=2" выполнена. Результат:
Oct 17 15:17:19 IQ138000 python3[1999]:  successfully requested primary SIM switch in modem
Oct 17 15:17:20 IQ138000 vnstatd[1684]: Info: Interface "ppp0" disabled.
Oct 17 15:17:20 IQ138000 ModemManager[492]: <info>  [modem0] state changed (disconnecting -> enabled)
Oct 17 15:17:20 IQ138000 ModemManager[492]: <info>  [modem0] state changed (enabled -> disabling)
Oct 17 15:17:20 IQ138000 ModemManager[492]: <info>  [modem0/bearer0] connection #1 finished: duration 91s
Oct 17 15:17:21 IQ138000 ModemManager[492]: <info>  [modem0] 3GPP registration state changed (idle -> unknown)
Oct 17 15:17:21 IQ138000 NetworkManager[404]: <info>  [1760714241.4006] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 17 15:17:23 IQ138000 ModemManager[492]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 17 15:17:25 IQ138000 ModemManager[492]: <warn>  [modem1] couldn't load supported modes: Couldn't retrieve supported modes
Oct 17 15:17:25 IQ138000 ModemManager[492]: <warn>  [modem1/sim1] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 17 15:17:26 IQ138000 ModemManager[492]: <warn>  [modem1/sim1] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 17 15:17:26 IQ138000 ModemManager[492]: <warn>  [modem1] couldn't load list of own numbers: Operation not supported
Oct 17 15:17:26 IQ138000 ModemManager[492]: <info>  [modem1] state changed (unknown -> disabled)
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7008] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/13)
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7027] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7045] device (ttyUSB1): modem state 'enabling'
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7064] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7086] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7119] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7126] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:26 IQ138000 NetworkManager[404]: <info>  [1760714246.7143] manager: NetworkManager state is now CONNECTING
Oct 17 15:17:26 IQ138000 ModemManager[492]: <info>  [modem1] state changed (disabled -> enabling)
Oct 17 15:17:26 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection wb-gsm-sim2 8b9964d4-b8dd-34d3-a3ed-481840bcf8c9 /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/5
Oct 17 15:17:26 IQ138000 ModemManager[492]: <info>  [modem1] power state updated: on
Oct 17 15:17:29 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 17 15:17:29 IQ138000 python3[1999]: Выполнение: mmcli -i any
Oct 17 15:17:29 IQ138000 python3[1999]: Команда "mmcli -i any" выполнена. Результат:
Oct 17 15:17:29 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:29 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:29 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:29 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:29 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:17:29 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:17:29 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:17:29 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:17:29 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:17:29 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:17:29 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:30 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:30 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:17:30 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:30 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:30 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:30 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:30 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:30 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:30 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:30 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:30 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:30 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:30 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:30 IQ138000 python3[1999]:            |                state: enabling
Oct 17 15:17:30 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:30 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:30 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:30 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:17:30 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:17:30 IQ138000 python3[1999]: Current state:
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] state changed (enabling -> enabled)
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] 3GPP registration state changed (unknown -> registering)
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] 3GPP registration state changed (registering -> home)
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] state changed (enabled -> registered)
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] simple connect started...
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] simple connect state (6/10): register
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] simple connect state (7/10): wait to get packet service state attached
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] simple connect state (8/10): bearer
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] simple connect state (9/10): connect
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] state changed (registered -> connecting)
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] state changed (connecting -> connected)
Oct 17 15:17:31 IQ138000 ModemManager[492]: <info>  [modem1] simple connect state (10/10): all done
Oct 17 15:17:31 IQ138000 NetworkManager[404]: <info>  [1760714251.8249] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:31 IQ138000 NetworkManager[404]: <info>  [1760714251.8263] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 17 15:17:31 IQ138000 NetworkManager[404]: <info>  [1760714251.8272] ppp-manager: starting PPP connection
Oct 17 15:17:31 IQ138000 NetworkManager[404]: <info>  [1760714251.8391] ppp-manager: pppd started with pid 7293
Oct 17 15:17:31 IQ138000 pppd[7293]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 17 15:17:31 IQ138000 NetworkManager[7293]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: initializing
Oct 17 15:17:31 IQ138000 pppd[7293]: pppd 2.4.9 started by root, uid 0
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 17 15:17:31 IQ138000 pppd[7293]: Using interface ppp0
Oct 17 15:17:31 IQ138000 NetworkManager[7293]: Using interface ppp0
Oct 17 15:17:31 IQ138000 NetworkManager[7293]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 17 15:17:31 IQ138000 pppd[7293]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 17 15:17:31 IQ138000 NetworkManager[404]: <info>  [1760714251.9063] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/14)
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: got credentials from NetworkManager
Oct 17 15:17:31 IQ138000 pppd[7293]: nm-ppp-plugin: status 8 / phase 'network'
Oct 17 15:17:31 IQ138000 NetworkManager[7293]: PAP authentication succeeded
Oct 17 15:17:31 IQ138000 NetworkManager[7293]: kernel does not support PPP filtering
Oct 17 15:17:31 IQ138000 pppd[7293]: PAP authentication succeeded
Oct 17 15:17:31 IQ138000 pppd[7293]: kernel does not support PPP filtering
Oct 17 15:17:32 IQ138000 ModemManager[492]: <info>  [modem1] mobile equipment request to activate context (cid 2)
Oct 17 15:17:32 IQ138000 pppd[7293]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 17 15:17:32 IQ138000 NetworkManager[7293]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 17 15:17:32 IQ138000 NetworkManager[7293]: local  IP address 10.163.128.224
Oct 17 15:17:32 IQ138000 NetworkManager[7293]: remote IP address 10.64.64.64
Oct 17 15:17:32 IQ138000 NetworkManager[7293]: primary   DNS address 176.59.62.125
Oct 17 15:17:32 IQ138000 NetworkManager[7293]: secondary DNS address 176.59.62.126
Oct 17 15:17:32 IQ138000 pppd[7293]: nm-ppp-plugin: status 9 / phase 'running'
Oct 17 15:17:32 IQ138000 pppd[7293]: local  IP address 10.163.128.224
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.4297] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 15:17:32 IQ138000 pppd[7293]: remote IP address 10.64.64.64
Oct 17 15:17:32 IQ138000 pppd[7293]: primary   DNS address 176.59.62.125
Oct 17 15:17:32 IQ138000 pppd[7293]: secondary DNS address 176.59.62.126
Oct 17 15:17:32 IQ138000 pppd[7293]: nm-ppp-plugin: ip-up event
Oct 17 15:17:32 IQ138000 pppd[7293]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.4400] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.4452] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.4470] ppp-manager: (IPv4 Config Get) reply received.
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.4528] policy: set 'wb-gsm-sim2' (ppp0) as default for IPv4 routing and DNS
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.4925] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:32 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 15:17:32 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 17 15:17:32 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 17 15:17:32 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.5923] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.5936] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.5960] manager: NetworkManager state is now CONNECTED_SITE
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.5981] device (ttyUSB1): Activation: successful, device activated.
Oct 17 15:17:32 IQ138000 NetworkManager[404]: <info>  [1760714252.6018] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 17 15:17:34 IQ138000 ntpd[1679]: Listen normally on 5 ppp0 10.163.128.224:123
Oct 17 15:17:34 IQ138000 ntpd[1679]: new interface(s) found: waking up resolver
Oct 17 15:17:35 IQ138000 vnstatd[1684]: Info: Interface "ppp0" enabled.
Oct 17 15:17:40 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:17:40 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:40 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:17:40 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:40 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:40 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:40 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:40 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:40 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:40 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:40 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:40 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:40 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:40 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:40 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:40 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:40 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:40 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:40 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:40 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:17:40 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:17:40 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:40 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:40 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:17:40 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:17:40 IQ138000 python3[1999]: Current state: home
Oct 17 15:17:40 IQ138000 python3[1999]: SIM registered in the network.
Oct 17 15:17:40 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:40 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:40 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:17:40 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:40 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:40 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:40 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:40 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:40 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:40 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:40 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:40 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:40 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:40 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:40 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:40 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:40 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:40 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:40 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:40 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:17:40 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:17:40 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:40 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:40 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:17:40 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:17:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:17:40 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:40 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:17:40 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:40 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:40 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:40 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:17:40 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:17:40 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:17:40 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:17:40 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:17:40 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:17:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:17:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:17:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:17:43 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 17 15:17:45 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:45 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:45 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:17:45 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:45 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:45 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:45 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:45 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:45 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:45 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:45 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:45 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:45 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:45 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:45 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:45 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:45 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:45 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:45 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:45 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:17:45 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:17:45 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:45 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:45 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:17:45 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:17:45 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:45 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:17:45 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:45 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:45 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:45 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:17:45 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:17:45 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:17:45 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:17:45 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:17:45 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:17:50 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:50 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:50 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:17:50 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:50 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:50 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:50 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:50 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:50 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:50 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:50 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:50 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:50 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:50 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:50 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:50 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:50 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:50 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:50 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:50 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:17:50 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:17:50 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:50 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:50 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:17:50 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:17:50 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:17:50 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:50 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:17:50 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:50 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:50 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:50 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:17:50 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:17:50 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:17:50 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:17:50 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:17:50 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:17:55 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:17:55 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:17:55 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:17:55 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:17:55 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:17:55 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:17:55 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:17:55 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:17:55 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:17:55 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:17:55 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:17:55 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:17:55 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:17:55 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:17:55 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:17:55 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:17:55 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:17:55 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:17:55 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:17:55 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:17:55 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:17:55 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:17:55 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:55 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:17:55 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:17:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:17:55 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:55 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:17:55 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:17:55 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:17:55 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:17:55 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:17:55 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:17:55 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:17:55 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:17:55 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:17:55 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:00 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:00 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:00 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:00 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:00 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:00 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:00 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:00 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:00 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:00 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:00 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:00 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:00 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:00 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:00 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:00 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:00 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:00 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:00 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:00 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:00 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:00 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:00 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:00 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:00 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:00 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:00 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:01 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:01 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:01 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:01 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:01 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:01 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:01 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:01 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:01 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:01 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:01 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:01 IQ138000 wb-watchdog[7722]: [INFO] Interval #5 started. Waiting up to 60 seconds for error...
Oct 17 15:18:06 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:06 IQ138000 ntpd[1679]: Soliciting pool server 51.250.53.172
Oct 17 15:18:06 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:06 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:06 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:06 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:06 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:06 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:06 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:06 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:06 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:06 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:06 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:06 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:06 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:06 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:06 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:06 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:06 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:06 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:06 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:06 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:06 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:06 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:06 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:06 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:06 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:06 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:06 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:06 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:06 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:06 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:06 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:06 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:06 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:06 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:06 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:07 IQ138000 ntpd[1679]: Soliciting pool server 93.95.100.85
Oct 17 15:18:08 IQ138000 ntpd[1679]: Soliciting pool server 195.90.182.235
Oct 17 15:18:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:18:11 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:11 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:11 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:11 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:11 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:11 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:11 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:11 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:11 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:11 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:11 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:11 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:11 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:11 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:11 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:11 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:11 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:11 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:11 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:11 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:11 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:11 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:11 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:11 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:11 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:11 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:11 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:11 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:11 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:11 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:11 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:11 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:11 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:11 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:11 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:11 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:14 IQ138000 ntpd[1679]: Soliciting pool server 2a02:6bf:f000:1:4::21
Oct 17 15:18:14 IQ138000 ntpd[1679]: Soliciting pool server 85.193.65.152
Oct 17 15:18:14 IQ138000 ntpd[1679]: Soliciting pool server 62.76.113.232
Oct 17 15:18:14 IQ138000 ntpd[1679]: Soliciting pool server 45.141.102.99
Oct 17 15:18:16 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:16 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:16 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:16 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:16 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:16 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:16 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:16 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:16 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:16 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:16 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:16 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:16 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:16 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:16 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:16 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:16 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:16 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:16 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:16 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:16 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:16 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:16 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:16 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:16 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:16 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:16 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:16 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:16 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:16 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:16 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:16 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:16 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:16 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:16 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:16 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:21 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:21 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:21 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:21 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:21 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:21 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:21 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:21 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:21 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:21 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:21 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:21 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:21 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:21 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:21 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:21 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:21 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:21 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:21 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:21 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:21 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:21 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:21 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:21 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:21 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:21 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:21 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:21 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:21 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:21 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:21 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:21 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:21 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:21 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:21 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:21 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L3, row count 7183, limit 7042
Oct 17 15:18:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L1, row count 7183, limit 7042
Oct 17 15:18:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:18:26 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:26 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:26 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:26 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:26 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:26 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:26 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:26 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:26 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:26 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:26 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:26 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:26 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:26 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:26 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:26 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:26 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:26 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:26 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:26 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:26 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:26 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:26 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:26 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:26 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:26 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:26 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:26 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:26 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:26 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:26 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:26 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:26 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:26 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:26 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:26 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:18:31 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:31 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:31 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:31 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:31 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:31 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:31 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:31 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:31 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:31 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:31 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:31 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:31 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:31 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:31 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:31 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:31 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:31 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:31 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:31 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:31 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:31 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:31 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:31 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:31 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:32 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:32 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:32 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:32 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:32 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:32 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:32 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:32 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:32 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:32 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:32 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:32 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:32 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:32 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:37 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:37 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:37 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:37 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:37 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:37 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:37 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:37 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:37 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:37 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:37 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:37 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:37 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:37 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:37 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:37 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:37 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:37 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:37 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:37 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:37 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:37 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:37 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:37 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:37 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:37 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:37 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:37 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:37 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:37 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:37 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:37 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:37 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:37 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:37 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:37 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:42 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:42 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:42 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:42 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:42 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:42 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:42 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:42 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:42 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:42 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:42 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:42 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:42 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:42 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:42 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:42 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:42 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:42 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:42 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:42 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:42 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:42 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:42 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:42 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:42 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:42 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:42 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:42 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:42 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:42 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:42 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:42 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:42 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:42 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:42 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:42 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:47 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:47 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:47 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:47 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:47 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:47 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:47 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:47 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:47 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:47 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:47 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:47 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:47 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:47 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:47 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:47 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:47 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:47 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:47 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:47 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:47 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:47 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:47 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:47 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:47 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:47 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:47 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:47 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:47 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:47 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:47 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:47 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:47 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:47 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:47 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:47 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:18:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:18:52 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:18:52 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:18:52 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/1
Oct 17 15:18:52 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:18:52 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:18:52 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:18:52 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:18:52 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:18:52 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:18:52 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:18:52 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:18:52 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:18:52 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:18:52 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:18:52 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:18:52 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:18:52 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:18:52 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:18:52 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:18:52 IQ138000 python3[1999]:            |          operator id: 25020
Oct 17 15:18:52 IQ138000 python3[1999]:            |        operator name: t2
Oct 17 15:18:52 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:18:52 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:52 IQ138000 python3[1999]:            |       sim slot paths: slot 1: none
Oct 17 15:18:52 IQ138000 python3[1999]:            |                       slot 2: /org/freedesktop/ModemManager1/SIM/1 (active)
Oct 17 15:18:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/1
Oct 17 15:18:52 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:52 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/1" выполнена. Результат:
Oct 17 15:18:52 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/1
Oct 17 15:18:52 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:18:52 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:18:52 IQ138000 python3[1999]:              |              imsi: 250207496118656
Oct 17 15:18:52 IQ138000 python3[1999]:              |             iccid: 89701206289022194789
Oct 17 15:18:52 IQ138000 python3[1999]:              |       operator id: 25020
Oct 17 15:18:52 IQ138000 python3[1999]:              |     operator name: t2
Oct 17 15:18:52 IQ138000 python3[1999]:              |              gid1: FFFF
Oct 17 15:18:52 IQ138000 python3[1999]:              |              gid2: FFFF
Oct 17 15:18:57 IQ138000 python3[1999]: Выполнение: mmcli -m wbc --set-primary-sim-slot=1
Oct 17 15:18:58 IQ138000 ModemManager[492]: <info>  [modem1] mobile equipment forced PS detach: all contexts have been deactivated
Oct 17 15:18:58 IQ138000 ModemManager[492]: <info>  [modem1/bearer1] explicitly disconnected
Oct 17 15:18:58 IQ138000 ModemManager[492]: <info>  [modem1] 3GPP registration state changed (home -> idle)
Oct 17 15:18:58 IQ138000 ModemManager[492]: <info>  [modem1] network request to deactivate context (cid 1)
Oct 17 15:18:58 IQ138000 ModemManager[492]: <info>  [modem1] network request to deactivate context (cid 2)
Oct 17 15:18:58 IQ138000 ModemManager[492]: <info>  [modem1/bearer1] explicitly disconnected
Oct 17 15:18:59 IQ138000 pppd[7293]: LCP terminated by peer
Oct 17 15:18:59 IQ138000 NetworkManager[7293]: LCP terminated by peer
Oct 17 15:18:59 IQ138000 NetworkManager[7293]: Connect time 1.5 minutes.
Oct 17 15:18:59 IQ138000 NetworkManager[7293]: Sent 9748 bytes, received 10601 bytes.
Oct 17 15:18:59 IQ138000 pppd[7293]: nm-ppp-plugin: status 8 / phase 'network'
Oct 17 15:18:59 IQ138000 pppd[7293]: Connect time 1.5 minutes.
Oct 17 15:18:59 IQ138000 NetworkManager[404]: <info>  [1760714339.1108] device (ppp0): state change: disconnected -> unmanaged (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 15:18:59 IQ138000 pppd[7293]: Sent 9748 bytes, received 10601 bytes.
Oct 17 15:18:59 IQ138000 pppd[7293]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 17 15:19:01 IQ138000 ntpd[1679]: Deleting interface #5 *multiple*, 10.163.128.224#123, interface stats: received=81, sent=81, dropped=0, active_time=87 secs
Oct 17 15:19:01 IQ138000 ntpd[1679]: 45.141.102.99 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 62.76.113.232 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 85.193.65.152 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 195.90.182.235 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 93.95.100.85 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 51.250.53.172 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 51.250.35.68 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 192.36.143.130 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 45.90.217.6 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 51.250.110.169 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 188.68.222.140 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 91.207.136.55 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 92.255.126.22 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 92.255.126.17 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 162.159.200.1 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 151.0.2.53 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 ntpd[1679]: 162.159.200.123 local addr 10.163.128.224 -> <null>
Oct 17 15:19:01 IQ138000 wb-watchdog[8484]: [INFO] Interval #6 started. Waiting up to 60 seconds for error...
Oct 17 15:19:02 IQ138000 pppd[7293]: nm-ppp-plugin: status 11 / phase 'disconnect'
Oct 17 15:19:02 IQ138000 pppd[7293]: Connection terminated.
Oct 17 15:19:02 IQ138000 NetworkManager[7293]: Connection terminated.
Oct 17 15:19:02 IQ138000 avahi-daemon[371]: Withdrawing workstation service for ppp0.
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.1282] device (ttyUSB1): state change: activated -> failed (reason 'ppp-disconnect', sys-iface-state: 'managed')
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.1312] manager: NetworkManager state is now DISCONNECTED
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <warn>  [1760714342.1357] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim2'
Oct 17 15:19:02 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.1562] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:02 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 17 15:19:02 IQ138000 ModemManager[492]: <info>  [modem1] state changed (connected -> disconnecting)
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2185] policy: auto-activating connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2230] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim2' (8b9964d4-b8dd-34d3-a3ed-481840bcf8c9)
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2240] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:02 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/6 /org/freedesktop/NetworkManager/ActiveConnection/5
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2268] manager: NetworkManager state is now CONNECTING
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <warn>  [1760714342.2284] modem-broadband[ttyUSB1]: failed to connect 'wb-gsm-sim2': unable to determine the network id
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2292] device (ttyUSB1): state change: prepare -> failed (reason 'modem-init-failed', sys-iface-state: 'managed')
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2423] manager: NetworkManager state is now DISCONNECTED
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <warn>  [1760714342.2445] device (ttyUSB1): Activation: failed for connection 'wb-gsm-sim2'
Oct 17 15:19:02 IQ138000 NetworkManager[404]: <info>  [1760714342.2459] device (ttyUSB1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:02 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 17 15:19:02 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 17 15:19:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:19:03 IQ138000 pppd[7293]: Terminating on signal 15
Oct 17 15:19:03 IQ138000 NetworkManager[7293]: Terminating on signal 15
Oct 17 15:19:03 IQ138000 NetworkManager[7293]: Modem hangup
Oct 17 15:19:03 IQ138000 pppd[7293]: nm-ppp-plugin: status 1 / phase 'dead'
Oct 17 15:19:03 IQ138000 pppd[7293]: Modem hangup
Oct 17 15:19:03 IQ138000 pppd[7293]: nm-ppp-plugin: cleaning up
Oct 17 15:19:03 IQ138000 pppd[7293]: Exit.
Oct 17 15:19:03 IQ138000 python3[1999]: Команда "mmcli -m wbc --set-primary-sim-slot=1" выполнена. Результат:
Oct 17 15:19:03 IQ138000 python3[1999]:  successfully requested primary SIM switch in modem
Oct 17 15:19:04 IQ138000 ModemManager[492]: <info>  [modem1] state changed (disconnecting -> enabled)
Oct 17 15:19:04 IQ138000 ModemManager[492]: <info>  [modem1] state changed (enabled -> disabling)
Oct 17 15:19:04 IQ138000 ModemManager[492]: <info>  [modem1/bearer1] connection #1 finished: duration 92s
Oct 17 15:19:05 IQ138000 vnstatd[1684]: Info: Interface "ppp0" disabled.
Oct 17 15:19:07 IQ138000 ModemManager[492]: <info>  [modem1] 3GPP registration state changed (idle -> unknown)
Oct 17 15:19:07 IQ138000 NetworkManager[404]: <info>  [1760714347.4248] device (ttyUSB1): state change: disconnected -> unmanaged (reason 'removed', sys-iface-state: 'removed')
Oct 17 15:19:08 IQ138000 python3[1999]: Выполнение: service wb-connection-manager start
Oct 17 15:19:09 IQ138000 ModemManager[492]: <info>  [device wbc] creating modem with plugin 'simtech' and '5' ports
Oct 17 15:19:09 IQ138000 ModemManager[492]: <warn>  [modem2] couldn't load supported modes: Couldn't retrieve supported modes
Oct 17 15:19:10 IQ138000 ModemManager[492]: <warn>  [modem2/sim2] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 17 15:19:10 IQ138000 ModemManager[492]: <warn>  [modem2/sim2] couldn't load GID1: SIM failure
Oct 17 15:19:10 IQ138000 ModemManager[492]: <warn>  [modem2/sim2] couldn't load GID2: SIM failure
Oct 17 15:19:10 IQ138000 ModemManager[492]: <warn>  [modem2/sim2] couldn't load list of emergency numbers: Failed to parse CRSM query result '+CRSM: 105,129'
Oct 17 15:19:10 IQ138000 ModemManager[492]: <warn>  [modem2/sim2] couldn't load GID1: SIM failure
Oct 17 15:19:10 IQ138000 ModemManager[492]: <warn>  [modem2/sim2] couldn't load GID2: SIM failure
Oct 17 15:19:11 IQ138000 ModemManager[492]: <info>  [modem2] state changed (unknown -> disabled)
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3552] manager: (ttyUSB1): new Broadband device (/org/freedesktop/NetworkManager/Devices/15)
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3598] device (ttyUSB1): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3641] device (ttyUSB1): modem state 'enabling'
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3748] device (ttyUSB1): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3795] policy: auto-activating connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3843] device (ttyUSB1): Activation: starting connection 'wb-gsm-sim1' (5d4297ba-c319-4c05-a153-17cb42e6e196)
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3853] device (ttyUSB1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:11 IQ138000 ModemManager[492]: <info>  [modem2] state changed (disabled -> enabling)
Oct 17 15:19:11 IQ138000 NetworkManager[404]: <info>  [1760714351.3906] manager: NetworkManager state is now CONNECTING
Oct 17 15:19:11 IQ138000 ModemManager[492]: <info>  [modem2] power state updated: on
Oct 17 15:19:11 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection wb-gsm-sim1 5d4297ba-c319-4c05-a153-17cb42e6e196 /org/freedesktop/NetworkManager/Settings/4 /org/freedesktop/NetworkManager/ActiveConnection/7
Oct 17 15:19:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:19:13 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 17 15:19:13 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 17 15:19:13 IQ138000 python3[1999]: Команда "service wb-connection-manager start" выполнена. Результат:
Oct 17 15:19:13 IQ138000 python3[1999]:  
Oct 17 15:19:13 IQ138000 wb-connection-manager[8617]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 17 15:19:13 IQ138000 wb-connection-manager[8617]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.2310] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8617 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:19:14 IQ138000 wb-connection-manager[8617]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5263] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5267] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8617 uid=0 result="success"
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5278] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5333] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5352] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5354] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5454] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5474] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5491] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5494] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5495] Config: added 'scan_ssid' value '1'
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5496] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5497] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.5498] Config: added 'psk' value '<hidden>'
Oct 17 15:19:14 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/8
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.6144] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:19:14 IQ138000 NetworkManager[404]: <info>  [1760714354.6146] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:19:15 IQ138000 ModemManager[492]: <info>  [modem2] state changed (enabling -> enabled)
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] 3GPP registration state changed (unknown -> registering)
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] 3GPP registration state changed (registering -> home)
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] state changed (enabled -> registered)
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] simple connect started...
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] simple connect state (6/10): register
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] simple connect state (7/10): wait to get packet service state attached
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] simple connect state (8/10): bearer
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] simple connect state (9/10): connect
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] state changed (registered -> connecting)
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] state changed (connecting -> connected)
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] simple connect state (10/10): all done
Oct 17 15:19:16 IQ138000 NetworkManager[404]: <info>  [1760714356.5059] device (ttyUSB1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:16 IQ138000 NetworkManager[404]: <info>  [1760714356.5083] modem["ttyUSB1"]: using modem-specified IP timeout: 20 seconds
Oct 17 15:19:16 IQ138000 NetworkManager[404]: <info>  [1760714356.5095] ppp-manager: starting PPP connection
Oct 17 15:19:16 IQ138000 NetworkManager[404]: <info>  [1760714356.5236] ppp-manager: pppd started with pid 8644
Oct 17 15:19:16 IQ138000 pppd[8644]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 17 15:19:16 IQ138000 NetworkManager[8644]: Plugin /usr/lib/pppd/2.4.9/nm-pppd-plugin.so loaded.
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: initializing
Oct 17 15:19:16 IQ138000 pppd[8644]: pppd 2.4.9 started by root, uid 0
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: status 3 / phase 'serial connection'
Oct 17 15:19:16 IQ138000 pppd[8644]: Using interface ppp0
Oct 17 15:19:16 IQ138000 pppd[8644]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 17 15:19:16 IQ138000 NetworkManager[8644]: Using interface ppp0
Oct 17 15:19:16 IQ138000 NetworkManager[8644]: Connect: ppp0 <--> /dev/ttyUSB2
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: status 5 / phase 'establish'
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: status 6 / phase 'authenticate'
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: passwd-hook, requesting credentials...
Oct 17 15:19:16 IQ138000 NetworkManager[404]: <info>  [1760714356.5825] manager: (ppp0): new Ppp device (/org/freedesktop/NetworkManager/Devices/16)
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: got credentials from NetworkManager
Oct 17 15:19:16 IQ138000 pppd[8644]: PAP authentication succeeded
Oct 17 15:19:16 IQ138000 pppd[8644]: kernel does not support PPP filtering
Oct 17 15:19:16 IQ138000 pppd[8644]: nm-ppp-plugin: status 8 / phase 'network'
Oct 17 15:19:16 IQ138000 NetworkManager[8644]: PAP authentication succeeded
Oct 17 15:19:16 IQ138000 NetworkManager[8644]: kernel does not support PPP filtering
Oct 17 15:19:16 IQ138000 ModemManager[492]: <info>  [modem2] mobile equipment request to activate context (cid 3)
Oct 17 15:19:17 IQ138000 pppd[8644]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 17 15:19:17 IQ138000 NetworkManager[8644]: Could not determine remote IP address: defaulting to 10.64.64.64
Oct 17 15:19:17 IQ138000 pppd[8644]: local  IP address 10.105.107.171
Oct 17 15:19:17 IQ138000 NetworkManager[8644]: local  IP address 10.105.107.171
Oct 17 15:19:17 IQ138000 NetworkManager[8644]: remote IP address 10.64.64.64
Oct 17 15:19:17 IQ138000 NetworkManager[8644]: primary   DNS address 172.23.10.130
Oct 17 15:19:17 IQ138000 NetworkManager[8644]: secondary DNS address 172.23.10.131
Oct 17 15:19:17 IQ138000 pppd[8644]: nm-ppp-plugin: status 9 / phase 'running'
Oct 17 15:19:17 IQ138000 pppd[8644]: remote IP address 10.64.64.64
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.1006] device (ppp0): state change: unmanaged -> unavailable (reason 'connection-assumed', sys-iface-state: 'external')
Oct 17 15:19:17 IQ138000 pppd[8644]: primary   DNS address 172.23.10.130
Oct 17 15:19:17 IQ138000 pppd[8644]: secondary DNS address 172.23.10.131
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.1046] device (ppp0): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'external')
Oct 17 15:19:17 IQ138000 pppd[8644]: nm-ppp-plugin: ip-up event
Oct 17 15:19:17 IQ138000 pppd[8644]: nm-ppp-plugin: sending IPv4 config to NetworkManager...
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.1131] device (ttyUSB1): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.1178] device (ttyUSB1): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:17 IQ138000 dbus-daemon[300]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.5' (uid=0 pid=404 comm="/usr/sbin/NetworkManager --no-daemon ")
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.1287] ppp-manager: (IPv4 Config Get) reply received.
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.1306] policy: set 'wb-gsm-sim1' (ppp0) as default for IPv4 routing and DNS
Oct 17 15:19:17 IQ138000 systemd[1]: Starting Network Manager Script Dispatcher Service...
Oct 17 15:19:17 IQ138000 dbus-daemon[300]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.2175] device (ttyUSB1): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:17 IQ138000 systemd[1]: Started Network Manager Script Dispatcher Service.
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.2195] device (ttyUSB1): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.2232] device (ttyUSB1): Activation: successful, device activated.
Oct 17 15:19:17 IQ138000 NetworkManager[404]: <info>  [1760714357.2271] manager: NetworkManager state is now CONNECTED_GLOBAL
Oct 17 15:19:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:19:18 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:19:18 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:19:18 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:19:18 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:19:18 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:19:18 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:19:18 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:19:18 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:19:18 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:19:18 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:19:18 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:19:18 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:19:18 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:19:18 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:19:18 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:19:18 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:19:18 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:19:18 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:19:18 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:19:18 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:19:18 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:19:18 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:19:18 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:18 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:19:18 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:19:18 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:19:18 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:18 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:19:18 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:18 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:19:18 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:19:18 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:19:18 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:19:18 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:19:18 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:19:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:19:19 IQ138000 ntpd[1679]: Listen normally on 6 ppp0 10.105.107.171:123
Oct 17 15:19:19 IQ138000 ntpd[1679]: new interface(s) found: waking up resolver
Oct 17 15:19:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:19:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:19:20 IQ138000 python3[1999]: Command output: {
Oct 17 15:19:20 IQ138000 python3[1999]:     "wb-gsm-sim1": {
Oct 17 15:19:20 IQ138000 python3[1999]:         "250997340491874": {
Oct 17 15:19:20 IQ138000 python3[1999]:             "avg_signal_rating": 95.77018267530937,
Oct 17 15:19:20 IQ138000 python3[1999]:             "records": 1697,
Oct 17 15:19:20 IQ138000 python3[1999]:             "last_timestamp": {
Oct 17 15:19:20 IQ138000 python3[1999]:                 "iso": "2025-10-17T15:17:18",
Oct 17 15:19:20 IQ138000 python3[1999]:                 "timestamp": 1760714238
Oct 17 15:19:20 IQ138000 python3[1999]:             }
Oct 17 15:19:20 IQ138000 python3[1999]:         }
Oct 17 15:19:20 IQ138000 python3[1999]:     },
Oct 17 15:19:20 IQ138000 python3[1999]:     "wb-gsm-sim2": {
Oct 17 15:19:20 IQ138000 python3[1999]:         "250207496118656": {
Oct 17 15:19:20 IQ138000 python3[1999]:             "avg_signal_rating": 100.0,
Oct 17 15:19:20 IQ138000 python3[1999]:             "records": 856,
Oct 17 15:19:20 IQ138000 python3[1999]:             "last_timestamp": {
Oct 17 15:19:20 IQ138000 python3[1999]:                 "iso": "2025-10-17T15:19:02",
Oct 17 15:19:20 IQ138000 python3[1999]:                 "timestamp": 1760714342
Oct 17 15:19:20 IQ138000 python3[1999]:             }
Oct 17 15:19:20 IQ138000 python3[1999]:         }
Oct 17 15:19:20 IQ138000 python3[1999]:     }
Oct 17 15:19:20 IQ138000 python3[1999]: }
Oct 17 15:19:20 IQ138000 python3[1999]: Data successfully saved to /tmp/network_status_cache.json
Oct 17 15:19:20 IQ138000 python3[1999]: Slots with signal ratings: [{'slot': 'wb-gsm-sim2', 'imsi': '250207496118656', 'avg_signal_rating': 100.0}, {'slot': 'wb-gsm-sim1', 'imsi': '250997340491874', 'avg_signal_rating': 95.77018267530937}]
Oct 17 15:19:20 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:19:20 IQ138000 python3[8745]: {
Oct 17 15:19:20 IQ138000 python3[8745]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 17 15:19:20 IQ138000 python3[8745]:     "tiers": {
Oct 17 15:19:20 IQ138000 python3[8745]:         "high": [
Oct 17 15:19:20 IQ138000 python3[8745]:             "wb-eth0",
Oct 17 15:19:20 IQ138000 python3[8745]:             "ServiceAP"
Oct 17 15:19:20 IQ138000 python3[8745]:         ],
Oct 17 15:19:20 IQ138000 python3[8745]:         "low": [
Oct 17 15:19:20 IQ138000 python3[8745]:             "wb-gsm-sim2",
Oct 17 15:19:20 IQ138000 python3[8745]:             "wb-gsm-sim1"
Oct 17 15:19:20 IQ138000 python3[8745]:         ],
Oct 17 15:19:20 IQ138000 python3[8745]:         "medium": []
Oct 17 15:19:20 IQ138000 python3[8745]:     },
Oct 17 15:19:20 IQ138000 python3[8745]:     "debug": false
Oct 17 15:19:20 IQ138000 python3[8745]: }
Oct 17 15:19:20 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:19:20 IQ138000 python3[1999]: OLD SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 17 15:19:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:19:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 17 15:19:20 IQ138000 python3[1999]: NEW SETTINGS: {'eth1': {'is_active': False}, 'ppp0': {'priority': -2.0}, 'wlan0': {'is_active': False, 'key': 'Smart_Password!', 'priority': -1.0, 'ssid': 'IQnetwork'}}
Oct 17 15:19:20 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:19:20 IQ138000 python3[8752]: {
Oct 17 15:19:20 IQ138000 python3[8752]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 17 15:19:20 IQ138000 python3[8752]:     "tiers": {
Oct 17 15:19:20 IQ138000 python3[8752]:         "high": [
Oct 17 15:19:20 IQ138000 python3[8752]:             "wb-eth0",
Oct 17 15:19:20 IQ138000 python3[8752]:             "ServiceAP"
Oct 17 15:19:20 IQ138000 python3[8752]:         ],
Oct 17 15:19:20 IQ138000 python3[8752]:         "low": [
Oct 17 15:19:20 IQ138000 python3[8752]:             "wb-gsm-sim1",
Oct 17 15:19:20 IQ138000 python3[8752]:             "wb-gsm-sim2"
Oct 17 15:19:20 IQ138000 python3[8752]:         ],
Oct 17 15:19:20 IQ138000 python3[8752]:         "medium": []
Oct 17 15:19:20 IQ138000 python3[8752]:     },
Oct 17 15:19:20 IQ138000 python3[8752]:     "debug": false
Oct 17 15:19:20 IQ138000 python3[8752]: }
Oct 17 15:19:20 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:19:20 IQ138000 vnstatd[1684]: Info: Interface "ppp0" enabled.
Oct 17 15:19:20 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:19:20 IQ138000 python3[8755]: {
Oct 17 15:19:20 IQ138000 python3[8755]:     "connectivity_check_url": "http://network-test.debian.org/nm",
Oct 17 15:19:20 IQ138000 python3[8755]:     "tiers": {
Oct 17 15:19:20 IQ138000 python3[8755]:         "high": [
Oct 17 15:19:20 IQ138000 python3[8755]:             "wb-eth0",
Oct 17 15:19:20 IQ138000 python3[8755]:             "ServiceAP"
Oct 17 15:19:20 IQ138000 python3[8755]:         ],
Oct 17 15:19:20 IQ138000 python3[8755]:         "low": [
Oct 17 15:19:20 IQ138000 python3[8755]:             "wb-gsm-sim1",
Oct 17 15:19:20 IQ138000 python3[8755]:             "wb-gsm-sim2"
Oct 17 15:19:20 IQ138000 python3[8755]:         ],
Oct 17 15:19:20 IQ138000 python3[8755]:         "medium": [
Oct 17 15:19:20 IQ138000 python3[8755]:             "LegacyWiFi"
Oct 17 15:19:20 IQ138000 python3[8755]:         ]
Oct 17 15:19:20 IQ138000 python3[8755]:     },
Oct 17 15:19:20 IQ138000 python3[8755]:     "debug": false
Oct 17 15:19:20 IQ138000 python3[8755]: }
Oct 17 15:19:20 IQ138000 python3[1999]: File '/etc/wb-connection-manager.conf' was modified.
Oct 17 15:19:20 IQ138000 python3[1999]: Выполнение: service wb-connection-manager restart
Oct 17 15:19:21 IQ138000 systemd[1]: Stopping Network connections management service for Wiren Board devices...
Oct 17 15:19:21 IQ138000 systemd[1]: wb-connection-manager.service: Succeeded.
Oct 17 15:19:21 IQ138000 systemd[1]: Stopped Network connections management service for Wiren Board devices.
Oct 17 15:19:21 IQ138000 systemd[1]: Started Network connections management service for Wiren Board devices.
Oct 17 15:19:21 IQ138000 python3[1999]: Команда "service wb-connection-manager restart" выполнена. Результат:
Oct 17 15:19:21 IQ138000 python3[1999]:  
Oct 17 15:19:21 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:19:21 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:19:21 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:19:21 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:19:21 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:19:21 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:19:21 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:19:21 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:19:21 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:19:21 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:19:21 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:19:21 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:19:21 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:19:21 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:19:21 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:19:21 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:19:21 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:19:21 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:19:21 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:19:21 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:19:21 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:19:21 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:19:21 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:21 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:19:21 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:19:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:19:21 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:21 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:19:21 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:21 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:19:21 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:19:21 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:19:21 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:19:21 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:19:21 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:19:21 IQ138000 wb-connection-manager[8767]: Connection LegacyWiFi not found, skipping
Oct 17 15:19:21 IQ138000 wb-connection-manager[8767]: Connection wb-gsm-sim1 does not specify an interface, will recheck later
Oct 17 15:19:22 IQ138000 wb-connection-manager[8767]: Connection wb-gsm-sim2 does not specify an interface, will recheck later
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.3355] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:19:22 IQ138000 wb-connection-manager[8767]: Error during connection "wb-eth0" checking: org.freedesktop.NetworkManager.UnknownConnection: Connection 'wb-eth0' is not available on device eth0 because device has no carrier
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.7600] device (wlan1): state change: config -> deactivating (reason 'user-requested', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.7642] audit: op="connection-deactivate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.7813] device (wlan1): state change: deactivating -> disconnected (reason 'user-requested', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8257] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8260] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:19:22 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/8
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8441] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8448] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8461] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8770] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8872] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.8875] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9057] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9082] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9182] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9191] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9194] Config: added 'scan_ssid' value '1'
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9196] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9198] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:19:22 IQ138000 NetworkManager[404]: <info>  [1760714362.9200] Config: added 'psk' value '<hidden>'
Oct 17 15:19:22 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 17 15:19:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 15:19:23 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 17 15:19:23 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 17 15:19:27 IQ138000 NetworkManager[404]: <info>  [1760714367.0222] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:19:27 IQ138000 NetworkManager[404]: <info>  [1760714367.0225] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:19:33 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Succeeded.
Oct 17 15:19:33 IQ138000 systemd[1]: NetworkManager-dispatcher.service: Consumed 1.398s CPU time.
Oct 17 15:19:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:19:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:19:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:19:48 IQ138000 NetworkManager[404]: <warn>  [1760714388.5002] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:19:48 IQ138000 NetworkManager[404]: <info>  [1760714388.5004] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:19:48 IQ138000 NetworkManager[404]: <warn>  [1760714388.5034] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:19:48 IQ138000 NetworkManager[404]: <info>  [1760714388.5049] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:19:48 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 17 15:19:48 IQ138000 NetworkManager[404]: <info>  [1760714388.5467] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:19:48 IQ138000 NetworkManager[404]: <info>  [1760714388.5482] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:19:49 IQ138000 wb-connection-manager[8767]: Error during connection "ServiceAP" checking: org.freedesktop.DBus.Error.UnknownMethod: No such interface “org.freedesktop.DBus.Properties” on object at path /org/freedesktop/NetworkManager/ActiveConnection/9
Oct 17 15:19:49 IQ138000 wb-connection-manager[8767]: Armed sticky timeout until 2025-10-17T15:34:49.426772 for device ttyUSB1
Oct 17 15:19:49 IQ138000 wb-connection-manager[8767]: Current connection changed to wb-gsm-sim1
Oct 17 15:19:51 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:19:51 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:19:51 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:19:51 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:19:51 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:19:51 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:19:51 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:19:51 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:19:51 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:19:51 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:19:51 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:19:51 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:19:51 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:19:51 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:19:51 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:19:51 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:19:51 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:19:51 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:19:51 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:19:51 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:19:51 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:19:51 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:19:51 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:51 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:19:51 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:19:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:19:51 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:51 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:19:51 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:19:51 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:19:51 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:19:51 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:19:51 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:19:51 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:19:51 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:19:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:19:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 4882 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:20:01 IQ138000 wb-watchdog[9233]: [INFO] Interval #7 started. Waiting up to 60 seconds for error...
Oct 17 15:20:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 8978 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:20:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:20:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:20:21 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:20:21 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:20:21 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:20:21 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:20:21 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:20:21 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:20:21 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:20:21 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:20:21 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:20:21 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:20:21 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:20:21 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:20:21 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:20:21 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:20:21 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:20:21 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:20:21 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:20:21 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:20:21 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:20:21 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:20:21 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:20:21 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:20:21 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:20:21 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:20:21 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:20:21 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:20:21 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:20:21 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:20:21 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:20:21 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:20:21 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:20:21 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:20:21 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:20:21 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:20:21 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:20:22 IQ138000 NetworkManager[404]: <info>  [1760714422.5625] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:20:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:20:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:20:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:20:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:20:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:20:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:20:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:20:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:20:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3248] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3253] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3258] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3312] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3331] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3334] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3433] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3454] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3471] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3474] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3475] Config: added 'scan_ssid' value '1'
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3476] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3477] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.3478] Config: added 'psk' value '<hidden>'
Oct 17 15:20:50 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/10
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.4172] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:20:50 IQ138000 NetworkManager[404]: <info>  [1760714450.4174] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:20:51 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:20:51 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:20:51 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:20:51 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:20:51 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:20:51 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:20:51 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:20:51 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:20:51 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:20:51 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:20:51 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:20:51 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:20:51 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:20:51 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:20:51 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:20:51 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:20:51 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:20:51 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:20:51 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:20:51 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:20:51 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:20:51 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:20:51 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:20:51 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:20:51 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:20:51 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:20:51 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:20:51 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:20:51 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:20:51 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:20:51 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:20:51 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:20:51 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:20:51 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:20:51 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:21:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:01 IQ138000 wb-watchdog[9927]: [INFO] Interval #8 started. Waiting up to 60 seconds for error...
Oct 17 15:21:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 12876 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:15 IQ138000 NetworkManager[404]: <warn>  [1760714475.4999] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:21:15 IQ138000 NetworkManager[404]: <info>  [1760714475.5000] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:21:15 IQ138000 NetworkManager[404]: <warn>  [1760714475.5031] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:21:15 IQ138000 NetworkManager[404]: <info>  [1760714475.5048] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:21:15 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/10
Oct 17 15:21:15 IQ138000 NetworkManager[404]: <info>  [1760714475.5608] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:21:15 IQ138000 NetworkManager[404]: <info>  [1760714475.5609] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:21:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:21 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:21:22 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:21:22 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:21:22 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:21:22 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:21:22 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:21:22 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:21:22 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:21:22 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:21:22 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:21:22 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:21:22 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:21:22 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:21:22 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:21:22 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:21:22 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:21:22 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:21:22 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:21:22 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:21:22 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:21:22 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:21:22 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:21:22 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:21:22 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:21:22 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:21:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:21:22 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:21:22 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:21:22 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:21:22 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:21:22 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:21:22 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:21:22 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:21:22 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:21:22 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:21:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:27 IQ138000 NetworkManager[404]: <info>  [1760714487.6679] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:21:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13326 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:21:52 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:21:52 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:21:52 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:21:52 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:21:52 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:21:52 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:21:52 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:21:52 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:21:52 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:21:52 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:21:52 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:21:52 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:21:52 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:21:52 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:21:52 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:21:52 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:21:52 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:21:52 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:21:52 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:21:52 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:21:52 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:21:52 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:21:52 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:21:52 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:21:52 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:21:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:21:52 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:21:52 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:21:52 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:21:52 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:21:52 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:21:52 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:21:52 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:21:52 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:21:52 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:21:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17158 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:01 IQ138000 wb-watchdog[10545]: [INFO] Interval #9 started. Waiting up to 60 seconds for error...
Oct 17 15:22:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6635] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6639] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6645] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6758] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6776] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6778] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6927] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6967] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6994] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6997] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6998] Config: added 'scan_ssid' value '1'
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.6999] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.7001] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.7002] Config: added 'psk' value '<hidden>'
Oct 17 15:22:17 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/11
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.7707] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:22:17 IQ138000 NetworkManager[404]: <info>  [1760714537.7709] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:22:22 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:22:22 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:22:22 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:22:22 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:22:22 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:22:22 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:22:22 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:22:22 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:22:22 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:22:22 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:22:22 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:22:22 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:22:22 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:22:22 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:22:22 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:22:22 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:22:22 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:22:22 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:22:22 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:22:22 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:22:22 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:22:22 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:22:22 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:22:22 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:22:22 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:22:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:22:22 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:22:22 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:22:22 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:22:22 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:22:22 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:22:22 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:22:22 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:22:22 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:22:22 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:22:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:42 IQ138000 NetworkManager[404]: <warn>  [1760714562.5008] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:22:42 IQ138000 NetworkManager[404]: <info>  [1760714562.5010] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:22:42 IQ138000 NetworkManager[404]: <warn>  [1760714562.5040] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:22:42 IQ138000 NetworkManager[404]: <info>  [1760714562.5054] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:22:42 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/11
Oct 17 15:22:42 IQ138000 NetworkManager[404]: <info>  [1760714562.5519] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:22:42 IQ138000 NetworkManager[404]: <info>  [1760714562.5521] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:22:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 18192 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:48 IQ138000 NetworkManager[404]: <info>  [1760714568.4821] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:22:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:52 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:22:52 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:22:52 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:22:52 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:22:52 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:22:52 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:22:52 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:22:52 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:22:52 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:22:52 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:22:52 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:22:52 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:22:52 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:22:52 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:22:52 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:22:52 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:22:52 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:22:52 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:22:52 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:22:52 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:22:52 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:22:52 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:22:52 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:22:52 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:22:52 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:22:52 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:22:52 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:22:52 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:22:52 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:22:52 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:22:52 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:22:52 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:22:52 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:22:52 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:22:52 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:22:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:22:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:22:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16944 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:22:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:22:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:23:01 IQ138000 wb-watchdog[11254]: [INFO] Interval #10 started. Waiting up to 60 seconds for error...
Oct 17 15:23:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:04 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L1, row count 7183, limit 7042
Oct 17 15:23:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12816 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 14082 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:22 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:23:22 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:23:22 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:23:22 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:23:22 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:23:22 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:23:22 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:23:22 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:23:22 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:23:22 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:23:22 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:23:22 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:23:22 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:23:22 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:23:22 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:23:22 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:23:22 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:23:22 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:23:22 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:23:22 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:23:22 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:23:22 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:23:22 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:23:22 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:23:22 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:23:22 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:23:22 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:23:22 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:23:22 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:23:22 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:23:22 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:23:22 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:23:22 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:23:22 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:23:22 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:23:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9389] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9396] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9405] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9548] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9568] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9570] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9692] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9734] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9764] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9778] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9779] Config: added 'scan_ssid' value '1'
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9781] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9782] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:23:43 IQ138000 NetworkManager[404]: <info>  [1760714623.9783] Config: added 'psk' value '<hidden>'
Oct 17 15:23:43 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/12
Oct 17 15:23:44 IQ138000 NetworkManager[404]: <info>  [1760714624.0515] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:23:44 IQ138000 NetworkManager[404]: <info>  [1760714624.0517] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:23:52 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:23:53 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:23:53 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:23:53 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:23:53 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:23:53 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:23:53 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:23:53 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:23:53 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:23:53 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:23:53 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:23:53 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:23:53 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:23:53 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:23:53 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:23:53 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:23:53 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:23:53 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:23:53 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:23:53 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:23:53 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:23:53 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:23:53 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:23:53 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:23:53 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:23:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:23:53 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:23:53 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:23:53 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:23:53 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:23:53 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:23:53 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:23:53 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:23:53 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:23:53 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:24:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:01 IQ138000 wb-watchdog[11855]: [INFO] Interval #11 started. Waiting up to 60 seconds for error...
Oct 17 15:24:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:09 IQ138000 NetworkManager[404]: <warn>  [1760714649.4999] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:24:09 IQ138000 NetworkManager[404]: <info>  [1760714649.5000] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:24:09 IQ138000 NetworkManager[404]: <warn>  [1760714649.5035] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:24:09 IQ138000 NetworkManager[404]: <info>  [1760714649.5052] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:24:09 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:24:09 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/12
Oct 17 15:24:09 IQ138000 NetworkManager[404]: <info>  [1760714649.5436] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:24:09 IQ138000 NetworkManager[404]: <info>  [1760714649.5438] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:24:10 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:24:15 IQ138000 NetworkManager[404]: <info>  [1760714655.6866] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:24:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:23 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:24:23 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:24:23 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:24:23 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:24:23 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:24:23 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:24:23 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:24:23 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:24:23 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:24:23 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:24:23 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:24:23 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:24:23 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:24:23 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:24:23 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:24:23 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:24:23 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:24:23 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:24:23 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:24:23 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:24:23 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:24:23 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:24:23 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:24:23 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:24:23 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:24:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:24:23 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:24:23 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:24:23 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:24:23 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:24:23 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:24:23 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:24:23 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:24:23 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:24:23 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:24:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 18196 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:24:53 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:24:53 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:24:53 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:24:53 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:24:53 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:24:53 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:24:53 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:24:53 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:24:53 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:24:53 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:24:53 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:24:53 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:24:53 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:24:53 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:24:53 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:24:53 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:24:53 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:24:53 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:24:53 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:24:53 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:24:53 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:24:53 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:24:53 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:24:53 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:24:53 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:24:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:24:53 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:24:53 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:24:53 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:24:53 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:24:53 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:24:53 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:24:53 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:24:53 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:24:53 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:25:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:25:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:25:01 IQ138000 wb-watchdog[12566]: [INFO] Interval #12 started. Waiting up to 60 seconds for error...
Oct 17 15:25:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:25:01 IQ138000 CRON[12572]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 15:25:01 IQ138000 CRON[12576]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 17 15:25:01 IQ138000 CRON[12572]: pam_unix(cron:session): session closed for user root
Oct 17 15:25:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:25:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1404] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1408] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1415] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1480] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1499] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1501] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1592] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1610] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1626] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1630] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1631] Config: added 'scan_ssid' value '1'
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1632] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1633] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:25:11 IQ138000 NetworkManager[404]: <info>  [1760714711.1634] Config: added 'psk' value '<hidden>'
Oct 17 15:25:11 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/13
Oct 17 15:25:13 IQ138000 NetworkManager[404]: <info>  [1760714713.2359] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:25:13 IQ138000 NetworkManager[404]: <info>  [1760714713.2372] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:25:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:23 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:25:23 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:25:23 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:25:23 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:25:23 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:25:23 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:25:23 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:25:23 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:25:23 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:25:23 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:25:23 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:25:23 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:25:23 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:25:23 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:25:23 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:25:23 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:25:23 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:25:23 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:25:23 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:25:23 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:25:23 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:25:23 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:25:23 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:25:23 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:25:23 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:25:23 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:25:23 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:25:23 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:25:23 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:25:23 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:25:23 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:25:23 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:25:23 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:25:23 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:25:23 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:25:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:36 IQ138000 NetworkManager[404]: <warn>  [1760714736.5003] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:25:36 IQ138000 NetworkManager[404]: <info>  [1760714736.5005] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:25:36 IQ138000 NetworkManager[404]: <warn>  [1760714736.5036] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:25:36 IQ138000 NetworkManager[404]: <info>  [1760714736.5050] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:25:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/13
Oct 17 15:25:36 IQ138000 NetworkManager[404]: <info>  [1760714736.5443] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:25:36 IQ138000 NetworkManager[404]: <info>  [1760714736.5446] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:25:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:42 IQ138000 NetworkManager[404]: <info>  [1760714742.9125] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:25:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:25:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:25:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:25:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:25:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:25:53 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:25:53 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:25:53 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:25:53 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:25:53 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:25:53 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:25:53 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:25:53 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:25:53 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:25:53 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:25:53 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:25:53 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:25:53 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:25:53 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:25:53 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:25:53 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:25:53 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:25:53 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:25:53 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:25:53 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:25:53 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:25:53 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:25:53 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:25:53 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:25:53 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:25:53 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:25:53 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:25:53 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:25:53 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:25:53 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:25:53 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:25:53 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:25:53 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:25:53 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:25:53 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:25:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:26:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:26:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:26:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:26:02 IQ138000 wb-watchdog[13186]: [INFO] Interval #13 started. Waiting up to 60 seconds for error...
Oct 17 15:26:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:24 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:26:24 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:26:24 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:26:24 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:26:24 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:26:24 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:26:24 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:26:24 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:26:24 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:26:24 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:26:24 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:26:24 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:26:24 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:26:24 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:26:24 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:26:24 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:26:24 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:26:24 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:26:24 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:26:24 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:26:24 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:26:24 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:26:24 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:26:24 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:26:24 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:26:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:26:24 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:26:24 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:26:24 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:26:24 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:26:24 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:26:24 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:26:24 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:26:24 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:26:24 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:26:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2609] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2617] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2626] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2731] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2769] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2773] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2918] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2970] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2991] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2994] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2996] Config: added 'scan_ssid' value '1'
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2997] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2998] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.2999] Config: added 'psk' value '<hidden>'
Oct 17 15:26:38 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/14
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.3879] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:26:38 IQ138000 NetworkManager[404]: <info>  [1760714798.3881] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:26:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:26:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:26:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:26:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:26:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:26:54 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:26:54 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:26:54 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:26:54 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:26:54 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:26:54 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:26:54 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:26:54 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:26:54 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:26:54 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:26:54 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:26:54 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:26:54 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:26:54 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:26:54 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:26:54 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:26:54 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:26:54 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:26:54 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:26:54 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:26:54 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:26:54 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:26:54 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:26:54 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:26:54 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:26:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:26:54 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:26:54 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:26:54 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:26:54 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:26:54 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:26:54 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:26:54 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:26:54 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:26:54 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:26:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12828 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:02 IQ138000 wb-watchdog[13898]: [INFO] Interval #14 started. Waiting up to 60 seconds for error...
Oct 17 15:27:03 IQ138000 NetworkManager[404]: <warn>  [1760714823.5002] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:27:03 IQ138000 NetworkManager[404]: <info>  [1760714823.5004] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:27:03 IQ138000 NetworkManager[404]: <warn>  [1760714823.5035] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:27:03 IQ138000 NetworkManager[404]: <info>  [1760714823.5050] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:27:03 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/14
Oct 17 15:27:03 IQ138000 NetworkManager[404]: <info>  [1760714823.5487] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:27:03 IQ138000 NetworkManager[404]: <info>  [1760714823.5489] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:27:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 9222 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12856 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:10 IQ138000 NetworkManager[404]: <info>  [1760714830.0415] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:27:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12820 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:24 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:27:24 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:27:24 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:27:24 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:27:24 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:27:24 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:27:24 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:27:24 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:27:24 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:27:24 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:27:24 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:27:24 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:27:24 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:27:24 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:27:24 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:27:24 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:27:24 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:27:24 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:27:24 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:27:24 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:27:24 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:27:24 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:27:24 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:27:24 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:27:24 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:27:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:27:24 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:27:24 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:27:24 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:27:24 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:27:24 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:27:24 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:27:24 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:27:24 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:27:24 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:27:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 4680 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:27:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:27:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:27:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12832 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:27:54 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:27:54 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:27:54 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:27:54 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:27:54 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:27:54 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:27:54 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:27:54 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:27:54 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:27:54 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:27:54 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:27:54 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:27:54 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:27:54 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:27:54 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:27:54 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:27:54 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:27:54 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:27:54 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:27:54 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:27:54 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:27:54 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:27:54 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:27:54 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:27:54 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:27:54 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:27:54 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:27:54 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:27:54 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:27:54 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:27:54 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:27:54 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:27:54 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:27:54 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:27:54 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:27:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 12478 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:02 IQ138000 wb-watchdog[14515]: [INFO] Interval #15 started. Waiting up to 60 seconds for error...
Oct 17 15:28:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 4337 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.4914] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.4919] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.4924] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.4975] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.4999] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5001] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5083] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5103] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5121] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5124] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5125] Config: added 'scan_ssid' value '1'
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5126] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5127] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5128] Config: added 'psk' value '<hidden>'
Oct 17 15:28:05 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/15
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5923] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:28:05 IQ138000 NetworkManager[404]: <info>  [1760714885.5928] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:28:15 IQ138000 ntpd[1679]: 195.90.182.235 local addr 10.105.107.171 -> <null>
Oct 17 15:28:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 5504 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:24 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:28:24 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:28:24 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:28:24 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:28:24 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:28:24 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:28:24 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:28:24 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:28:24 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:28:24 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:28:24 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:28:24 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:28:24 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:28:24 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:28:24 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:28:24 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:28:24 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:28:24 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:28:24 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:28:24 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:28:24 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:28:24 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:28:24 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:28:24 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:28:24 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:28:24 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:28:24 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:28:24 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:28:24 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:28:24 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:28:24 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:28:24 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:28:24 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:28:24 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:28:24 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:28:30 IQ138000 NetworkManager[404]: <warn>  [1760714910.5006] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:28:30 IQ138000 NetworkManager[404]: <info>  [1760714910.5008] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:28:30 IQ138000 NetworkManager[404]: <warn>  [1760714910.5033] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:28:30 IQ138000 NetworkManager[404]: <info>  [1760714910.5046] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:28:30 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/15
Oct 17 15:28:30 IQ138000 NetworkManager[404]: <info>  [1760714910.5610] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:28:30 IQ138000 NetworkManager[404]: <info>  [1760714910.5613] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:28:36 IQ138000 NetworkManager[404]: <info>  [1760714916.5610] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:28:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8708 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:28:54 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:28:55 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:28:55 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:28:55 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:28:55 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:28:55 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:28:55 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:28:55 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:28:55 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:28:55 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:28:55 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:28:55 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:28:55 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:28:55 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:28:55 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:28:55 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:28:55 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:28:55 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:28:55 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:28:55 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:28:55 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:28:55 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:28:55 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:28:55 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:28:55 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:28:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:28:55 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:28:55 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:28:55 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:28:55 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:28:55 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:28:55 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:28:55 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:28:55 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:28:55 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:29:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:29:02 IQ138000 wb-watchdog[15210]: [INFO] Interval #16 started. Waiting up to 60 seconds for error...
Oct 17 15:29:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:29:25 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:29:25 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:29:25 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:29:25 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:29:25 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:29:25 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:29:25 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:29:25 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:29:25 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:29:25 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:29:25 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:29:25 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:29:25 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:29:25 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:29:25 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:29:25 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:29:25 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:29:25 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:29:25 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:29:25 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:29:25 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:29:25 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:29:25 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:29:25 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:29:25 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:29:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:29:25 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:29:25 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:29:25 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:29:25 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:29:25 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:29:25 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:29:25 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:29:25 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:29:25 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9615] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9620] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9626] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9686] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9705] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9707] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:29:31 IQ138000 systemd[1]: Starting Cleanup of Temporary Directories...
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9810] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9830] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9849] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9853] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9854] Config: added 'scan_ssid' value '1'
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9855] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9858] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:29:31 IQ138000 NetworkManager[404]: <info>  [1760714971.9859] Config: added 'psk' value '<hidden>'
Oct 17 15:29:32 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/16
Oct 17 15:29:32 IQ138000 NetworkManager[404]: <info>  [1760714972.0714] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:29:32 IQ138000 NetworkManager[404]: <info>  [1760714972.0716] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:29:32 IQ138000 systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
Oct 17 15:29:32 IQ138000 systemd[1]: Finished Cleanup of Temporary Directories.
Oct 17 15:29:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:29:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:29:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:29:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:29:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:29:55 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:29:55 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:29:55 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:29:55 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:29:55 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:29:55 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:29:55 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:29:55 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:29:55 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:29:55 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:29:55 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:29:55 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:29:55 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:29:55 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:29:55 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:29:55 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:29:55 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:29:55 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:29:55 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:29:55 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:29:55 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:29:55 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:29:55 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:29:55 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:29:55 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:29:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:29:55 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:29:55 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:29:55 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:29:55 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:29:55 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:29:55 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:29:55 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:29:55 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:29:55 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:29:57 IQ138000 NetworkManager[404]: <warn>  [1760714997.5004] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:29:57 IQ138000 NetworkManager[404]: <info>  [1760714997.5007] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:29:57 IQ138000 NetworkManager[404]: <warn>  [1760714997.5037] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:29:57 IQ138000 NetworkManager[404]: <info>  [1760714997.5051] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:29:57 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:29:57 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/16
Oct 17 15:29:57 IQ138000 NetworkManager[404]: <info>  [1760714997.5462] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:29:57 IQ138000 NetworkManager[404]: <info>  [1760714997.5463] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:29:58 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:29:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:29:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:30:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:30:02 IQ138000 wb-watchdog[15833]: [INFO] Interval #17 started. Waiting up to 60 seconds for error...
Oct 17 15:30:03 IQ138000 NetworkManager[404]: <info>  [1760715003.7384] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:30:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:30:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:30:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Irms L3, row count 7183, limit 7042
Oct 17 15:30:25 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:30:25 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:30:25 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:30:25 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:30:25 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:30:25 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:30:25 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:30:25 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:30:25 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:30:25 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:30:25 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:30:25 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:30:25 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:30:25 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:30:25 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:30:25 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:30:25 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:30:25 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:30:25 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:30:25 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:30:25 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:30:25 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:30:25 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:30:25 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:30:25 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:30:25 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:30:25 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:30:25 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:30:25 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:30:25 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:30:25 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:30:25 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:30:25 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:30:25 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:30:25 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:30:55 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:30:55 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:30:55 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:30:55 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:30:55 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:30:55 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:30:55 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:30:55 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:30:55 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:30:55 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:30:55 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:30:55 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:30:55 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:30:55 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:30:55 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:30:55 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:30:55 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:30:55 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:30:55 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:30:55 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:30:55 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:30:55 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:30:55 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:30:55 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:30:55 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:30:55 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:30:55 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:30:55 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:30:56 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:30:56 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:30:56 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:30:56 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:30:56 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:30:56 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:30:56 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:30:56 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:30:56 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:30:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0636] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0652] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0676] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0749] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0777] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0787] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0890] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0921] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0947] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0950] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0951] Config: added 'scan_ssid' value '1'
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0952] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0953] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:30:59 IQ138000 NetworkManager[404]: <info>  [1760715059.0954] Config: added 'psk' value '<hidden>'
Oct 17 15:30:59 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/17
Oct 17 15:31:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 16629 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:02 IQ138000 NetworkManager[404]: <info>  [1760715062.1751] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:31:02 IQ138000 NetworkManager[404]: <info>  [1760715062.1753] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:31:03 IQ138000 wb-watchdog[16532]: [INFO] Interval #18 started. Waiting up to 60 seconds for error...
Oct 17 15:31:21 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:24 IQ138000 NetworkManager[404]: <warn>  [1760715084.4997] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:31:24 IQ138000 NetworkManager[404]: <info>  [1760715084.4999] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:31:24 IQ138000 NetworkManager[404]: <warn>  [1760715084.5029] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:31:24 IQ138000 NetworkManager[404]: <info>  [1760715084.5044] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:31:24 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/17
Oct 17 15:31:24 IQ138000 NetworkManager[404]: <info>  [1760715084.5530] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:31:24 IQ138000 NetworkManager[404]: <info>  [1760715084.5532] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:31:26 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:31:26 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:31:26 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:31:26 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:31:26 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:31:26 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:31:26 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:31:26 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:31:26 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:31:26 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:31:26 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:31:26 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:31:26 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:31:26 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:31:26 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:31:26 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:31:26 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:31:26 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:31:26 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:31:26 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:31:26 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:31:26 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:31:26 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:31:26 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:31:26 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:31:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:31:26 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:31:26 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:31:26 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:31:26 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:31:26 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:31:26 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:31:26 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:31:26 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:31:26 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:31:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:30 IQ138000 NetworkManager[404]: <info>  [1760715090.7997] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:31:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:56 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:31:56 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:31:56 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:31:56 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:31:56 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:31:56 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:31:56 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:31:56 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:31:56 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:31:56 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:31:56 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:31:56 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:31:56 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:31:56 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:31:56 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:31:56 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:31:56 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:31:56 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:31:56 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:31:56 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:31:56 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:31:56 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:31:56 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:31:56 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:31:56 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:31:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:31:56 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:31:56 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:31:56 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:31:56 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:31:56 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:31:56 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:31:56 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:31:56 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:31:56 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:31:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:31:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 16575 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:03 IQ138000 wb-watchdog[17149]: [INFO] Interval #19 started. Waiting up to 60 seconds for error...
Oct 17 15:32:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4345] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4351] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4357] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:32:26 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4433] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4465] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4467] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4570] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4593] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4612] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4615] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4616] Config: added 'scan_ssid' value '1'
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4617] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4619] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.4620] Config: added 'psk' value '<hidden>'
Oct 17 15:32:26 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/18
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.5393] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:32:26 IQ138000 NetworkManager[404]: <info>  [1760715146.5395] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:32:26 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:32:26 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:32:26 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:32:26 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:32:26 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:32:26 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:32:26 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:32:26 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:32:26 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:32:26 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:32:26 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:32:26 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:32:26 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:32:26 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:32:26 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:32:26 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:32:26 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:32:26 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:32:26 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:32:26 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:32:26 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:32:26 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:32:26 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:32:26 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:32:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:32:26 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:32:26 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:32:26 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:32:26 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:32:26 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:32:26 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:32:26 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:32:26 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:32:26 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:32:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:51 IQ138000 NetworkManager[404]: <warn>  [1760715171.5006] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:32:51 IQ138000 NetworkManager[404]: <info>  [1760715171.5008] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:32:51 IQ138000 NetworkManager[404]: <warn>  [1760715171.5039] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:32:51 IQ138000 NetworkManager[404]: <info>  [1760715171.5057] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:32:51 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/18
Oct 17 15:32:51 IQ138000 NetworkManager[404]: <info>  [1760715171.5474] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:32:51 IQ138000 NetworkManager[404]: <info>  [1760715171.5476] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:32:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:32:56 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:32:56 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:32:56 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:32:56 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:32:56 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:32:56 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:32:56 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:32:56 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:32:56 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:32:56 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:32:56 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:32:56 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:32:56 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:32:56 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:32:56 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:32:56 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:32:56 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:32:56 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:32:56 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:32:56 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:32:56 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:32:56 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:32:56 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:32:56 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:32:56 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:32:56 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:32:56 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:32:56 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:32:56 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:32:56 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:32:56 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:32:56 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:32:56 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:32:56 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:32:56 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:32:57 IQ138000 NetworkManager[404]: <info>  [1760715177.2398] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:33:03 IQ138000 wb-watchdog[17863]: [INFO] Interval #20 started. Waiting up to 60 seconds for error...
Oct 17 15:33:26 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:33:26 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:33:26 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:33:26 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:33:26 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:33:26 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:33:26 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:33:26 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:33:26 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:33:26 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:33:26 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:33:26 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:33:26 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:33:26 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:33:26 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:33:26 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:33:26 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:33:26 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:33:26 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:33:26 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:33:26 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:33:26 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:33:26 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:33:26 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:33:26 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:33:26 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:26 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:33:26 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:33:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:33:27 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:33:27 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:33:27 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:33:27 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:33:27 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:33:27 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:33:27 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:33:27 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:33:27 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:33:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:33:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:33:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:33:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:33:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:33:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 4285 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:33:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:33:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:33:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:33:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.6763] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.6788] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.6796] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.6884] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.6928] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.6930] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7103] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7125] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7147] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7156] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7157] Config: added 'scan_ssid' value '1'
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7158] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7159] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7159] Config: added 'psk' value '<hidden>'
Oct 17 15:33:52 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/19
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7895] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:33:52 IQ138000 NetworkManager[404]: <info>  [1760715232.7897] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:33:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:33:57 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:33:57 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:33:57 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:33:57 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:33:57 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:33:57 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:33:57 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:33:57 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:33:57 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:33:57 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:33:57 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:33:57 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:33:57 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:33:57 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:33:57 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:33:57 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:33:57 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:33:57 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:33:57 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:33:57 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:33:57 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:33:57 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:33:57 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:33:57 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:33:57 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:33:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:33:57 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:33:57 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:33:57 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:33:57 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:33:57 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:33:57 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:33:57 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:33:57 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:33:57 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:34:03 IQ138000 wb-watchdog[18464]: [INFO] Interval #21 started. Waiting up to 60 seconds for error...
Oct 17 15:34:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 16633 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:34:17 IQ138000 NetworkManager[404]: <warn>  [1760715257.4999] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:34:17 IQ138000 NetworkManager[404]: <info>  [1760715257.5001] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:34:17 IQ138000 NetworkManager[404]: <warn>  [1760715257.5035] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:34:17 IQ138000 NetworkManager[404]: <info>  [1760715257.5053] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:34:17 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/19
Oct 17 15:34:17 IQ138000 NetworkManager[404]: <info>  [1760715257.5435] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:34:17 IQ138000 NetworkManager[404]: <info>  [1760715257.5437] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:34:23 IQ138000 NetworkManager[404]: <info>  [1760715263.4420] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:34:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:34:27 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:34:27 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:34:27 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:34:27 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:34:27 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:34:27 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:34:27 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:34:27 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:34:27 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:34:27 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:34:27 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:34:27 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:34:27 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:34:27 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:34:27 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:34:27 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:34:27 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:34:27 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:34:27 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:34:27 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:34:27 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:34:27 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:34:27 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:34:27 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:34:27 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:34:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:34:27 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:34:27 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:34:27 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:34:27 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:34:27 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:34:27 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:34:27 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:34:27 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:34:27 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:34:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:34:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:34:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:34:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:34:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:34:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 5888 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:34:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:34:57 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:34:57 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:34:57 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:34:57 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:34:57 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:34:57 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:34:57 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:34:57 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:34:57 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:34:57 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:34:57 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:34:57 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:34:57 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:34:57 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:34:57 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:34:57 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:34:57 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:34:57 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:34:57 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:34:57 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:34:57 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:34:57 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:34:57 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:34:57 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:34:57 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:34:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:34:57 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:34:57 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:34:57 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:34:57 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:34:57 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:34:57 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:34:57 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:34:57 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:34:57 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:35:01 IQ138000 CRON[19160]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 15:35:01 IQ138000 CRON[19169]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 17 15:35:01 IQ138000 CRON[19160]: pam_unix(cron:session): session closed for user root
Oct 17 15:35:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 15:35:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:35:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:35:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:35:03 IQ138000 wb-watchdog[19187]: [INFO] Interval #22 started. Waiting up to 60 seconds for error...
Oct 17 15:35:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:35:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9515] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9556] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9564] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9637] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9663] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9665] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9759] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9782] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9800] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9804] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9805] Config: added 'scan_ssid' value '1'
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9806] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9808] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:35:18 IQ138000 NetworkManager[404]: <info>  [1760715318.9809] Config: added 'psk' value '<hidden>'
Oct 17 15:35:18 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/20
Oct 17 15:35:19 IQ138000 NetworkManager[404]: <info>  [1760715319.0465] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:35:19 IQ138000 NetworkManager[404]: <info>  [1760715319.0467] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:35:27 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:35:27 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:35:27 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:35:27 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:35:27 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:35:27 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:35:27 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:35:27 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:35:27 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:35:27 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:35:27 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:35:27 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:35:27 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:35:27 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:35:27 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:35:27 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:35:27 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:35:27 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:35:27 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:35:27 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:35:27 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:35:27 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:35:27 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:35:27 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:35:27 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:35:27 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:35:27 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:35:27 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:35:27 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:35:27 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:35:27 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:35:27 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:35:27 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:35:27 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:35:27 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:35:32 IQ138000 reverse-ssh.sh[5996]: client_loop: send disconnect: Broken pipe
Oct 17 15:35:32 IQ138000 reverse-ssh.sh[19448]: Error: Unknown option '1'.
Oct 17 15:35:32 IQ138000 reverse-ssh.sh[19448]: Use 'mosquitto_pub --help' to see usage.
Oct 17 15:35:32 IQ138000 systemd[1]: reverse-ssh.service: Main process exited, code=exited, status=1/FAILURE
Oct 17 15:35:32 IQ138000 systemd[1]: reverse-ssh.service: Failed with result 'exit-code'.
Oct 17 15:35:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:35:42 IQ138000 systemd[1]: reverse-ssh.service: Scheduled restart job, restart counter is at 4.
Oct 17 15:35:42 IQ138000 systemd[1]: Stopped Reverse SSH Tunneling.
Oct 17 15:35:42 IQ138000 systemd[1]: Starting Reverse SSH Tunneling...
Oct 17 15:35:42 IQ138000 systemd[1]: Started Reverse SSH Tunneling.
Oct 17 15:35:44 IQ138000 NetworkManager[404]: <warn>  [1760715344.5005] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:35:44 IQ138000 NetworkManager[404]: <info>  [1760715344.5007] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:35:44 IQ138000 NetworkManager[404]: <warn>  [1760715344.5037] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:35:44 IQ138000 NetworkManager[404]: <info>  [1760715344.5051] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:35:44 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/20
Oct 17 15:35:44 IQ138000 NetworkManager[404]: <info>  [1760715344.5441] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:35:44 IQ138000 NetworkManager[404]: <info>  [1760715344.5443] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:35:50 IQ138000 NetworkManager[404]: <info>  [1760715350.7391] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:35:57 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:35:57 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:35:57 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:35:57 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:35:57 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:35:57 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:35:57 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:35:57 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:35:57 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:35:57 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:35:57 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:35:57 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:35:57 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:35:57 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:35:57 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:35:57 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:35:57 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:35:57 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:35:57 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:35:57 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:35:57 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:35:57 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:35:57 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:35:57 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:35:57 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:35:57 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:35:57 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:35:57 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:35:58 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:35:58 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:35:58 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:35:58 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:35:58 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:35:58 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:35:58 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:35:58 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:35:58 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:36:04 IQ138000 wb-watchdog[19809]: [INFO] Interval #23 started. Waiting up to 60 seconds for error...
Oct 17 15:36:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:36:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:36:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:36:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9486 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:36:28 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:36:28 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:36:28 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:36:28 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:36:28 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:36:28 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:36:28 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:36:28 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:36:28 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:36:28 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:36:28 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:36:28 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:36:28 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:36:28 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:36:28 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:36:28 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:36:28 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:36:28 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:36:28 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:36:28 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:36:28 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:36:28 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:36:28 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:36:28 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:36:28 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:36:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:36:28 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:36:28 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:36:28 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:36:28 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:36:28 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:36:28 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:36:28 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:36:28 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:36:28 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0454] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0458] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0463] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0539] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0557] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0558] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0645] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0671] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0697] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0702] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0703] Config: added 'scan_ssid' value '1'
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0704] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0706] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.0706] Config: added 'psk' value '<hidden>'
Oct 17 15:36:46 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/21
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.1373] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:36:46 IQ138000 NetworkManager[404]: <info>  [1760715406.1375] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:36:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:36:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:36:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:36:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:36:58 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:36:58 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:36:58 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:36:58 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:36:58 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:36:58 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:36:58 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:36:58 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:36:58 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:36:58 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:36:58 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:36:58 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:36:58 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:36:58 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:36:58 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:36:58 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:36:58 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:36:58 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:36:58 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:36:58 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:36:58 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:36:58 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:36:58 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:36:58 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:36:58 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:36:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:36:58 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:36:58 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:36:58 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:36:58 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:36:58 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:36:58 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:36:58 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:36:58 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:36:58 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:37:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:37:04 IQ138000 wb-watchdog[20516]: [INFO] Interval #24 started. Waiting up to 60 seconds for error...
Oct 17 15:37:11 IQ138000 NetworkManager[404]: <warn>  [1760715431.5001] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:37:11 IQ138000 NetworkManager[404]: <info>  [1760715431.5003] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:37:11 IQ138000 NetworkManager[404]: <warn>  [1760715431.5033] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:37:11 IQ138000 NetworkManager[404]: <info>  [1760715431.5046] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:37:11 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:37:11 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/21
Oct 17 15:37:11 IQ138000 NetworkManager[404]: <info>  [1760715431.5492] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:37:11 IQ138000 NetworkManager[404]: <info>  [1760715431.5494] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:37:12 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:37:17 IQ138000 NetworkManager[404]: <info>  [1760715437.8128] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:37:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:37:28 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:37:28 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:37:28 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:37:28 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:37:28 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:37:28 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:37:28 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:37:28 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:37:28 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:37:28 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:37:28 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:37:28 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:37:28 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:37:28 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:37:28 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:37:28 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:37:28 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:37:28 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:37:28 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:37:28 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:37:28 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:37:28 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:37:28 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:37:28 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:37:28 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:37:28 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:37:28 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:37:28 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:37:28 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:37:28 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:37:28 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:37:28 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:37:28 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:37:28 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:37:28 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:37:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13598 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:37:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:37:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:37:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:37:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:37:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:37:58 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:37:58 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:37:58 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:37:58 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:37:58 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:37:58 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:37:58 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:37:58 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:37:58 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:37:58 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:37:58 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:37:58 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:37:58 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:37:58 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:37:58 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:37:58 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:37:58 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:37:58 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:37:58 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:37:58 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:37:58 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:37:58 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:37:58 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:37:58 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:37:58 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:37:58 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:37:58 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:37:58 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:37:58 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:37:58 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:37:58 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:37:58 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:37:58 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:37:58 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:37:58 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:38:01 IQ138000 CRON[21104]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 15:38:01 IQ138000 CRON[21109]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 17 15:38:03 IQ138000 sSMTP[21131]: Unable to locate mail
Oct 17 15:38:03 IQ138000 sSMTP[21131]: Cannot open mail:25
Oct 17 15:38:03 IQ138000 cron[21131]: sendmail: Cannot open mail:25
Oct 17 15:38:03 IQ138000 CRON[21104]: (root) MAIL (mailed 367 bytes of output but got status 0x0001 from MTA
                                      )
Oct 17 15:38:03 IQ138000 CRON[21104]: pam_unix(cron:session): session closed for user root
Oct 17 15:38:04 IQ138000 wb-watchdog[21144]: [INFO] Interval #25 started. Waiting up to 60 seconds for error...
Oct 17 15:38:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3534] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3548] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3558] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3716] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3733] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3734] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3835] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3860] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3879] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3882] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3883] Config: added 'scan_ssid' value '1'
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3884] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3885] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:38:13 IQ138000 NetworkManager[404]: <info>  [1760715493.3887] Config: added 'psk' value '<hidden>'
Oct 17 15:38:13 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/22
Oct 17 15:38:15 IQ138000 NetworkManager[404]: <info>  [1760715495.4747] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:38:15 IQ138000 NetworkManager[404]: <info>  [1760715495.4749] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:38:29 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:38:29 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:38:29 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:38:29 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:38:29 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:38:29 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:38:29 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:38:29 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:38:29 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:38:29 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:38:29 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:38:29 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:38:29 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:38:29 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:38:29 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:38:29 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:38:29 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:38:29 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:38:29 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:38:29 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:38:29 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:38:29 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:38:29 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:38:29 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:38:29 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:38:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:38:29 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:38:29 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:38:29 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:38:29 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:38:29 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:38:29 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:38:29 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:38:29 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:38:29 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:38:38 IQ138000 NetworkManager[404]: <warn>  [1760715518.5004] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:38:38 IQ138000 NetworkManager[404]: <info>  [1760715518.5006] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:38:38 IQ138000 NetworkManager[404]: <warn>  [1760715518.5038] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:38:38 IQ138000 NetworkManager[404]: <info>  [1760715518.5061] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:38:38 IQ138000 systemd[1]: Starting Daily apt upgrade and clean activities...
Oct 17 15:38:38 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/22
Oct 17 15:38:38 IQ138000 NetworkManager[404]: <info>  [1760715518.5655] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:38:38 IQ138000 NetworkManager[404]: <info>  [1760715518.5657] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:38:42 IQ138000 systemd[1]: apt-daily-upgrade.service: Succeeded.
Oct 17 15:38:42 IQ138000 systemd[1]: Finished Daily apt upgrade and clean activities.
Oct 17 15:38:42 IQ138000 systemd[1]: apt-daily-upgrade.service: Consumed 3.320s CPU time.
Oct 17 15:38:44 IQ138000 NetworkManager[404]: <info>  [1760715524.2725] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:38:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:38:59 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:38:59 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:38:59 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:38:59 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:38:59 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:38:59 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:38:59 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:38:59 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:38:59 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:38:59 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:38:59 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:38:59 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:38:59 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:38:59 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:38:59 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:38:59 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:38:59 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:38:59 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:38:59 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:38:59 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:38:59 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:38:59 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:38:59 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:38:59 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:38:59 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:38:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:38:59 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:38:59 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:38:59 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:38:59 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:38:59 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:38:59 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:38:59 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:38:59 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:38:59 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:39:04 IQ138000 wb-watchdog[21898]: [INFO] Interval #26 started. Waiting up to 60 seconds for error...
Oct 17 15:39:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 12476 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:39:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:39:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:39:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:39:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:39:29 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:39:29 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:39:29 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:39:29 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:39:29 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:39:29 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:39:29 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:39:29 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:39:29 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:39:29 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:39:29 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:39:29 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:39:29 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:39:29 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:39:29 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:39:29 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:39:29 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:39:29 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:39:29 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:39:29 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:39:29 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:39:29 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:39:29 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:39:29 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:39:29 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:39:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:39:29 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:39:29 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:39:29 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:39:29 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:39:29 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:39:29 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:39:29 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:39:29 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:39:29 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:39:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0527] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0540] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0546] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0637] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0659] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0662] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0760] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0782] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0803] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0807] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0808] Config: added 'scan_ssid' value '1'
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0809] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0810] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.0811] Config: added 'psk' value '<hidden>'
Oct 17 15:39:40 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/23
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.1616] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:39:40 IQ138000 NetworkManager[404]: <info>  [1760715580.1618] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:39:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:39:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:39:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:39:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:39:59 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:39:59 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:39:59 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:39:59 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:39:59 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:39:59 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:39:59 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:39:59 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:39:59 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:39:59 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:39:59 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:39:59 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:39:59 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:39:59 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:39:59 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:39:59 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:39:59 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:39:59 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:39:59 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:39:59 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:39:59 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:39:59 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:39:59 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:39:59 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:39:59 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:39:59 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:39:59 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:39:59 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:39:59 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:39:59 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:39:59 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:39:59 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:39:59 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:39:59 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:39:59 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:40:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 15:40:04 IQ138000 wb-watchdog[22515]: [INFO] Interval #27 started. Waiting up to 60 seconds for error...
Oct 17 15:40:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:40:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:40:05 IQ138000 NetworkManager[404]: <warn>  [1760715605.5002] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:40:05 IQ138000 NetworkManager[404]: <info>  [1760715605.5004] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:40:05 IQ138000 NetworkManager[404]: <warn>  [1760715605.5032] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:40:05 IQ138000 NetworkManager[404]: <info>  [1760715605.5045] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:40:05 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/23
Oct 17 15:40:05 IQ138000 NetworkManager[404]: <info>  [1760715605.5545] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:40:05 IQ138000 NetworkManager[404]: <info>  [1760715605.5559] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:40:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:40:11 IQ138000 NetworkManager[404]: <info>  [1760715611.8351] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:40:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:40:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 Phase angle L1, row count 7183, limit 7042
Oct 17 15:40:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:40:29 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:40:29 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:40:29 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:40:29 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:40:29 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:40:29 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:40:29 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:40:29 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:40:29 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:40:29 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:40:29 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:40:29 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:40:29 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:40:29 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:40:29 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:40:29 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:40:29 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:40:29 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:40:29 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:40:29 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:40:29 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:40:29 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:40:29 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:40:29 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:40:29 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:40:29 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:40:29 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:40:29 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:40:30 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:40:30 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:40:30 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:40:30 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:40:30 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:40:30 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:40:30 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:40:30 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:40:30 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:40:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:40:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:41:00 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:41:00 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:41:00 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:41:00 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:41:00 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:41:00 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:41:00 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:41:00 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:41:00 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:41:00 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:41:00 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:41:00 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:41:00 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:41:00 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:41:00 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:41:00 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:41:00 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:41:00 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:41:00 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:41:00 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:41:00 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:41:00 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:41:00 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:41:00 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:41:00 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:41:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:41:00 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:41:00 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:41:00 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:41:00 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:41:00 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:41:00 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:41:00 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:41:00 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:41:00 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:41:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5402 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:41:04 IQ138000 wb-watchdog[23208]: [INFO] Interval #28 started. Waiting up to 60 seconds for error...
Oct 17 15:41:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.2906] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.2911] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.2919] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.2985] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3006] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3008] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3127] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3196] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3219] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3222] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3223] Config: added 'scan_ssid' value '1'
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3224] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3226] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.3226] Config: added 'psk' value '<hidden>'
Oct 17 15:41:07 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/24
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.4048] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:41:07 IQ138000 NetworkManager[404]: <info>  [1760715667.4051] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:41:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:41:30 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:41:30 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:41:30 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:41:30 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:41:30 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:41:30 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:41:30 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:41:30 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:41:30 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:41:30 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:41:30 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:41:30 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:41:30 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:41:30 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:41:30 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:41:30 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:41:30 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:41:30 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:41:30 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:41:30 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:41:30 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:41:30 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:41:30 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:41:30 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:41:30 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:41:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:41:30 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:41:30 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:41:30 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:41:30 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:41:30 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:41:30 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:41:30 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:41:30 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:41:30 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:41:32 IQ138000 NetworkManager[404]: <warn>  [1760715692.4995] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:41:32 IQ138000 NetworkManager[404]: <info>  [1760715692.4997] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:41:32 IQ138000 NetworkManager[404]: <warn>  [1760715692.5023] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:41:32 IQ138000 NetworkManager[404]: <info>  [1760715692.5035] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:41:32 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/24
Oct 17 15:41:32 IQ138000 NetworkManager[404]: <info>  [1760715692.5491] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:41:32 IQ138000 NetworkManager[404]: <info>  [1760715692.5493] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:41:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:41:39 IQ138000 NetworkManager[404]: <info>  [1760715699.0845] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:41:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9474 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:41:44 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:41:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:00 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:42:00 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:42:00 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:42:00 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:42:00 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:42:00 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:42:00 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:42:00 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:42:00 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:42:00 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:42:00 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:42:00 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:42:00 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:42:00 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:42:00 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:42:00 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:42:00 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:42:00 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:42:00 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:42:00 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:42:00 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:42:00 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:42:00 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:42:00 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:42:00 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:42:00 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:42:00 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:42:00 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:42:00 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:42:00 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:42:00 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:42:00 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:42:00 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:42:00 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:42:00 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:42:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:04 IQ138000 wb-watchdog[23825]: [INFO] Interval #29 started. Waiting up to 60 seconds for error...
Oct 17 15:42:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:14 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 P L2, row count 7183, limit 7042
Oct 17 15:42:30 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:42:30 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:42:30 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:42:30 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:42:30 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:42:30 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:42:30 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:42:30 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:42:30 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:42:30 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:42:30 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:42:30 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:42:30 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:42:30 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:42:30 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:42:30 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:42:30 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:42:30 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:42:30 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:42:30 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:42:30 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:42:30 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:42:30 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:42:30 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:42:30 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:42:30 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:42:30 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:42:30 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:42:30 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:42:30 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:42:30 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:42:30 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:42:30 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:42:30 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:42:30 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4648] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4652] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4658] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4721] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4738] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4740] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4828] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4851] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4867] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4871] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4872] Config: added 'scan_ssid' value '1'
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4873] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4875] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.4875] Config: added 'psk' value '<hidden>'
Oct 17 15:42:34 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/25
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.5562] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:42:34 IQ138000 NetworkManager[404]: <info>  [1760715754.5564] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:42:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:42:59 IQ138000 NetworkManager[404]: <warn>  [1760715779.5009] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:42:59 IQ138000 NetworkManager[404]: <info>  [1760715779.5011] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:42:59 IQ138000 NetworkManager[404]: <warn>  [1760715779.5042] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:42:59 IQ138000 NetworkManager[404]: <info>  [1760715779.5056] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:42:59 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/25
Oct 17 15:42:59 IQ138000 NetworkManager[404]: <info>  [1760715779.5451] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:42:59 IQ138000 NetworkManager[404]: <info>  [1760715779.5453] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:43:00 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:43:01 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:43:01 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:43:01 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:43:01 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:43:01 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:43:01 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:43:01 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:43:01 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:43:01 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:43:01 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:43:01 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:43:01 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:43:01 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:43:01 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:43:01 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:43:01 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:43:01 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:43:01 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:43:01 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:43:01 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:43:01 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:43:01 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:43:01 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:43:01 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:43:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:43:01 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:43:01 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:43:01 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:43:01 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:43:01 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:43:01 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:43:01 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:43:01 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:43:01 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:43:04 IQ138000 wb-watchdog[24535]: [INFO] Interval #30 started. Waiting up to 60 seconds for error...
Oct 17 15:43:05 IQ138000 NetworkManager[404]: <info>  [1760715785.2793] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:43:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:43:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:43:31 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:43:31 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:43:31 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:43:31 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:43:31 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:43:31 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:43:31 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:43:31 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:43:31 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:43:31 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:43:31 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:43:31 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:43:31 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:43:31 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:43:31 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:43:31 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:43:31 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:43:31 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:43:31 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:43:31 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:43:31 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:43:31 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:43:31 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:43:31 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:43:31 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:43:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:43:31 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:43:31 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:43:31 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:43:31 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:43:31 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:43:31 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:43:31 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:43:31 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:43:31 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:43:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 14080 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:43:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:43:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7323] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7328] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7334] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7419] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7448] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7459] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7575] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7601] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7641] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7644] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7646] Config: added 'scan_ssid' value '1'
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7647] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7648] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.7650] Config: added 'psk' value '<hidden>'
Oct 17 15:44:00 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/26
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.8334] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:44:00 IQ138000 NetworkManager[404]: <info>  [1760715840.8338] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:44:01 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:44:01 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:44:01 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:44:01 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:44:01 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:44:01 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:44:01 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:44:01 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:44:01 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:44:01 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:44:01 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:44:01 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:44:01 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:44:01 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:44:01 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:44:01 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:44:01 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:44:01 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:44:01 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:44:01 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:44:01 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:44:01 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:44:01 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:44:01 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:44:01 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:44:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:44:01 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:44:01 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:44:01 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:44:01 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:44:01 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:44:01 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:44:01 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:44:01 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:44:01 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:44:04 IQ138000 wb-watchdog[25133]: [INFO] Interval #31 started. Waiting up to 60 seconds for error...
Oct 17 15:44:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 16572 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17690 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:26 IQ138000 NetworkManager[404]: <warn>  [1760715866.5001] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:44:26 IQ138000 NetworkManager[404]: <info>  [1760715866.5003] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:44:26 IQ138000 NetworkManager[404]: <warn>  [1760715866.5033] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:44:26 IQ138000 NetworkManager[404]: <info>  [1760715866.5047] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:44:26 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:44:26 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/26
Oct 17 15:44:26 IQ138000 NetworkManager[404]: <info>  [1760715866.5382] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:44:26 IQ138000 NetworkManager[404]: <info>  [1760715866.5384] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:44:27 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:44:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 18 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:31 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:44:31 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:44:31 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:44:31 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:44:31 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:44:31 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:44:31 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:44:31 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:44:31 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:44:31 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:44:31 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:44:31 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:44:31 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:44:31 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:44:31 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:44:31 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:44:31 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:44:31 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:44:31 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:44:31 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:44:31 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:44:31 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:44:31 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:44:31 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:44:31 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:44:31 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:44:31 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:44:31 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:44:31 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:44:31 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:44:31 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:44:31 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:44:31 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:44:31 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:44:31 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:44:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:32 IQ138000 NetworkManager[404]: <info>  [1760715872.5060] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:44:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 12868 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 13070 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12844 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:44:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:01 IQ138000 CRON[25814]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 15:45:01 IQ138000 CRON[25818]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 17 15:45:01 IQ138000 CRON[25814]: pam_unix(cron:session): session closed for user root
Oct 17 15:45:01 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:45:01 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:45:01 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:45:01 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:45:01 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:45:01 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:45:01 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:45:01 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:45:01 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:45:01 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:45:01 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:45:01 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:45:01 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:45:01 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:45:01 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:45:01 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:45:01 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:45:01 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:45:01 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:45:01 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:45:01 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:45:01 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:45:01 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:45:01 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:45:01 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:45:01 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:45:01 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:45:01 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:45:01 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:45:01 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:45:01 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:45:01 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:45:01 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:45:01 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:45:01 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:45:04 IQ138000 wb-watchdog[25862]: [INFO] Interval #32 started. Waiting up to 60 seconds for error...
Oct 17 15:45:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4624 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:45:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:45:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:45:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:45:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9200] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9206] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9212] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9307] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9344] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9346] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9438] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9468] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9517] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9531] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9533] Config: added 'scan_ssid' value '1'
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9534] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9536] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:45:27 IQ138000 NetworkManager[404]: <info>  [1760715927.9537] Config: added 'psk' value '<hidden>'
Oct 17 15:45:27 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/27
Oct 17 15:45:30 IQ138000 NetworkManager[404]: <info>  [1760715930.0407] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:45:30 IQ138000 NetworkManager[404]: <info>  [1760715930.0410] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:45:31 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:45:32 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:45:32 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:45:32 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:45:32 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:45:32 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:45:32 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:45:32 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:45:32 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:45:32 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:45:32 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:45:32 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:45:32 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:45:32 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:45:32 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:45:32 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:45:32 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:45:32 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:45:32 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:45:32 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:45:32 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:45:32 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:45:32 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:45:32 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:45:32 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:45:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:45:32 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:45:32 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:45:32 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:45:32 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:45:32 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:45:32 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:45:32 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:45:32 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:45:32 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:45:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 13064 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16952 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:53 IQ138000 NetworkManager[404]: <warn>  [1760715953.5004] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:45:53 IQ138000 NetworkManager[404]: <info>  [1760715953.5006] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:45:53 IQ138000 NetworkManager[404]: <warn>  [1760715953.5046] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:45:53 IQ138000 NetworkManager[404]: <info>  [1760715953.5093] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:45:53 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/27
Oct 17 15:45:53 IQ138000 NetworkManager[404]: <info>  [1760715953.5518] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:45:53 IQ138000 NetworkManager[404]: <info>  [1760715953.5520] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:45:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:45:59 IQ138000 NetworkManager[404]: <info>  [1760715959.6705] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:46:02 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:46:02 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:46:02 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:46:02 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:46:02 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:46:02 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:46:02 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:46:02 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:46:02 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:46:02 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:46:02 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:46:02 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:46:02 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:46:02 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:46:02 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:46:02 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:46:02 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:46:02 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:46:02 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:46:02 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:46:02 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:46:02 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:46:02 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:46:02 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:46:02 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:46:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:46:02 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:46:02 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:46:02 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:46:02 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:46:02 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:46:02 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:46:02 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:46:02 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:46:02 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:46:04 IQ138000 wb-watchdog[26461]: [INFO] Interval #33 started. Waiting up to 60 seconds for error...
Oct 17 15:46:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:46:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:46:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:46:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 RP energy L2, row count 7183, limit 7042
Oct 17 15:46:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4656 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:46:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8712 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:46:32 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:46:32 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:46:32 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:46:32 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:46:32 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:46:32 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:46:32 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:46:32 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:46:32 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:46:32 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:46:32 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:46:32 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:46:32 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:46:32 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:46:32 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:46:32 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:46:32 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:46:32 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:46:32 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:46:32 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:46:32 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:46:32 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:46:32 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:46:32 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:46:32 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:46:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:46:32 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:46:32 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:46:32 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:46:32 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:46:32 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:46:32 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:46:32 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:46:32 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:46:32 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:46:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0463] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0468] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0474] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0533] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0565] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0567] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0661] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0680] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0700] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0704] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0706] Config: added 'scan_ssid' value '1'
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0707] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0708] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.0709] Config: added 'psk' value '<hidden>'
Oct 17 15:46:55 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/28
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.1420] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:46:55 IQ138000 NetworkManager[404]: <info>  [1760716015.1422] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:47:02 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:47:02 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:47:02 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:47:02 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:47:02 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:47:02 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:47:02 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:47:02 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:47:02 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:47:02 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:47:02 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:47:02 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:47:02 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:47:02 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:47:02 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:47:02 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:47:02 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:47:02 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:47:02 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:47:02 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:47:02 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:47:02 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:47:02 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:47:02 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:47:02 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:47:02 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:47:02 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:47:02 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:47:02 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:47:02 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:47:02 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:47:02 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:47:02 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:47:02 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:47:02 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:47:04 IQ138000 wb-watchdog[27176]: [INFO] Interval #34 started. Waiting up to 60 seconds for error...
Oct 17 15:47:20 IQ138000 NetworkManager[404]: <warn>  [1760716040.5003] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:47:20 IQ138000 NetworkManager[404]: <info>  [1760716040.5005] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:47:20 IQ138000 NetworkManager[404]: <warn>  [1760716040.5034] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:47:20 IQ138000 NetworkManager[404]: <info>  [1760716040.5048] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:47:20 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:47:20 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/28
Oct 17 15:47:20 IQ138000 NetworkManager[404]: <info>  [1760716040.5455] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:47:20 IQ138000 NetworkManager[404]: <info>  [1760716040.5457] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:47:21 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:47:26 IQ138000 NetworkManager[404]: <info>  [1760716046.8270] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:47:32 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:47:32 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:47:32 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:47:32 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:47:32 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:47:32 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:47:32 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:47:32 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:47:32 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:47:32 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:47:32 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:47:32 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:47:32 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:47:32 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:47:32 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:47:32 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:47:32 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:47:32 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:47:32 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:47:32 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:47:32 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:47:32 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:47:32 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:47:32 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:47:32 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:47:32 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:47:32 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:47:32 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:47:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:47:33 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:47:33 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:47:33 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:47:33 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:47:33 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:47:33 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:47:33 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:47:33 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:47:33 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:47:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:22: Serial protocol error: request timed out
Oct 17 15:47:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:47:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:47:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:47:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:47:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:47:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:47:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:48:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:48:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 17172 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:48:03 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:48:03 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:48:03 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:48:03 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:48:03 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:48:03 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:48:03 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:48:03 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:48:03 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:48:03 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:48:03 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:48:03 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:48:03 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:48:03 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:48:03 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:48:03 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:48:03 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:48:03 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:48:03 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:48:03 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:48:03 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:48:03 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:48:03 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:48:03 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:48:03 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:48:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:48:03 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:48:03 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:48:03 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:48:03 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:48:03 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:48:03 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:48:03 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:48:03 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:48:03 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:48:04 IQ138000 wb-watchdog[27787]: [INFO] Interval #35 started. Waiting up to 60 seconds for error...
Oct 17 15:48:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2634] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2650] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2655] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2706] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2724] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2725] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2820] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2843] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2864] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2868] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2869] Config: added 'scan_ssid' value '1'
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2870] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2871] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:48:22 IQ138000 NetworkManager[404]: <info>  [1760716102.2872] Config: added 'psk' value '<hidden>'
Oct 17 15:48:22 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/29
Oct 17 15:48:24 IQ138000 NetworkManager[404]: <info>  [1760716104.3654] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:48:24 IQ138000 NetworkManager[404]: <info>  [1760716104.3657] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:48:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:48:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4644 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:48:33 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:48:33 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:48:33 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:48:33 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:48:33 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:48:33 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:48:33 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:48:33 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:48:33 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:48:33 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:48:33 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:48:33 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:48:33 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:48:33 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:48:33 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:48:33 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:48:33 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:48:33 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:48:33 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:48:33 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:48:33 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:48:33 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:48:33 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:48:33 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:48:33 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:48:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:48:33 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:48:33 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:48:33 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:48:33 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:48:33 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:48:33 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:48:33 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:48:33 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:48:33 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:48:47 IQ138000 NetworkManager[404]: <warn>  [1760716127.5000] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:48:47 IQ138000 NetworkManager[404]: <info>  [1760716127.5002] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:48:47 IQ138000 NetworkManager[404]: <warn>  [1760716127.5032] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:48:47 IQ138000 NetworkManager[404]: <info>  [1760716127.5048] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:48:47 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/29
Oct 17 15:48:47 IQ138000 NetworkManager[404]: <info>  [1760716127.5452] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:48:47 IQ138000 NetworkManager[404]: <info>  [1760716127.5454] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:48:54 IQ138000 NetworkManager[404]: <info>  [1760716134.0216] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:48:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 8380 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:49:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 13062 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:49:03 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:49:03 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:49:03 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:49:03 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:49:03 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:49:03 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:49:03 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:49:03 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:49:03 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:49:03 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:49:03 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:49:03 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:49:03 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:49:03 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:49:03 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:49:03 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:49:03 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:49:03 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:49:03 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:49:03 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:49:03 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:49:03 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:49:03 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:49:03 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:49:03 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:49:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:49:03 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:49:03 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:49:03 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:49:03 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:49:03 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:49:03 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:49:03 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:49:03 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:49:03 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:49:04 IQ138000 wb-watchdog[28481]: [INFO] Interval #36 started. Waiting up to 60 seconds for error...
Oct 17 15:49:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:49:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 4880 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:49:33 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:49:33 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:49:33 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:49:33 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:49:33 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:49:33 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:49:33 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:49:33 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:49:33 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:49:33 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:49:33 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:49:33 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:49:33 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:49:33 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:49:33 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:49:33 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:49:33 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:49:33 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:49:33 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:49:33 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:49:33 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:49:33 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:49:33 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:49:33 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:49:33 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:49:33 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:49:33 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:49:33 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:49:33 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:49:33 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:49:33 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:49:33 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:49:33 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:49:33 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:49:33 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:49:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:49:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 15:49:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:49:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:49:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2682] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2689] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2695] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2788] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2820] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2822] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2933] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.2992] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3011] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3016] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3017] Config: added 'scan_ssid' value '1'
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3018] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3019] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3020] Config: added 'psk' value '<hidden>'
Oct 17 15:49:49 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/30
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3820] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:49:49 IQ138000 NetworkManager[404]: <info>  [1760716189.3822] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:50:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 17412 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:50:03 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:50:03 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:50:03 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:50:03 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:50:03 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:50:03 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:50:03 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:50:03 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:50:03 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:50:03 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:50:03 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:50:03 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:50:03 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:50:03 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:50:03 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:50:03 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:50:03 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:50:03 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:50:03 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:50:03 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:50:03 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:50:03 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:50:03 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:50:03 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:50:03 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:50:03 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:03 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:50:03 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:50:04 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:50:04 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:50:04 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:50:04 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:50:04 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:50:04 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:50:04 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:50:04 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:50:04 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:50:04 IQ138000 wb-watchdog[29096]: [INFO] Interval #37 started. Waiting up to 60 seconds for error...
Oct 17 15:50:14 IQ138000 NetworkManager[404]: <warn>  [1760716214.4996] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:50:14 IQ138000 NetworkManager[404]: <info>  [1760716214.4998] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:50:14 IQ138000 NetworkManager[404]: <warn>  [1760716214.5028] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:50:14 IQ138000 NetworkManager[404]: <info>  [1760716214.5042] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:50:14 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/30
Oct 17 15:50:14 IQ138000 NetworkManager[404]: <info>  [1760716214.5411] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:50:14 IQ138000 NetworkManager[404]: <info>  [1760716214.5412] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:50:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:50:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4632 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:50:21 IQ138000 NetworkManager[404]: <info>  [1760716221.0775] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:50:34 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:50:34 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:50:34 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:50:34 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:50:34 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:50:34 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:50:34 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:50:34 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:50:34 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:50:34 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:50:34 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:50:34 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:50:34 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:50:34 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:50:34 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:50:34 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:50:34 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:50:34 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:50:34 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:50:34 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:50:34 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:50:34 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:50:34 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:50:34 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:50:34 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:50:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:50:34 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:50:34 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:50:34 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:50:34 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:50:34 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:50:34 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:50:34 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:50:34 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:50:34 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:50:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16960 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:50:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:50:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 14 input(s) @ 4874 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:51:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:51:04 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:51:04 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:51:04 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:51:04 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:51:04 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:51:04 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:51:04 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:51:04 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:51:04 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:51:04 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:51:04 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:51:04 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:51:04 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:51:04 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:51:04 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:51:04 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:51:04 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:51:04 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:51:04 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:51:04 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:51:04 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:51:04 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:51:04 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:51:04 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:51:04 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:51:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:51:04 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:51:04 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 1 NP energy L3, row count 7183, limit 7042
Oct 17 15:51:04 IQ138000 wb-watchdog[29797]: [INFO] Interval #38 started. Waiting up to 60 seconds for error...
Oct 17 15:51:04 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:51:04 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:51:04 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:51:04 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:51:04 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:51:04 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:51:04 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:51:04 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4561] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4586] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4594] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4671] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4708] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4710] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4824] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4847] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4871] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4874] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4875] Config: added 'scan_ssid' value '1'
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4876] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4878] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.4879] Config: added 'psk' value '<hidden>'
Oct 17 15:51:16 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/31
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.5564] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:51:16 IQ138000 NetworkManager[404]: <info>  [1760716276.5569] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:51:34 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:51:34 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:51:34 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:51:34 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:51:34 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:51:34 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:51:34 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:51:34 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:51:34 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:51:34 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:51:34 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:51:34 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:51:34 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:51:34 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:51:34 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:51:34 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:51:34 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:51:34 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:51:34 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:51:34 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:51:34 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:51:34 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:51:34 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:51:34 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:51:34 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:51:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:51:34 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:51:34 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:51:34 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:51:34 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:51:34 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:51:34 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:51:34 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:51:34 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:51:34 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:51:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:51:41 IQ138000 NetworkManager[404]: <warn>  [1760716301.5013] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:51:41 IQ138000 NetworkManager[404]: <info>  [1760716301.5016] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:51:41 IQ138000 NetworkManager[404]: <warn>  [1760716301.5044] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:51:41 IQ138000 NetworkManager[404]: <info>  [1760716301.5058] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:51:41 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/31
Oct 17 15:51:41 IQ138000 NetworkManager[404]: <info>  [1760716301.5667] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:51:41 IQ138000 NetworkManager[404]: <info>  [1760716301.5669] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:51:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:51:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:51:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:51:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:51:46 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:51:47 IQ138000 NetworkManager[404]: <info>  [1760716307.2207] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:51:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:51:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12824 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:52:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:52:04 IQ138000 wb-watchdog[30407]: [INFO] Interval #39 started. Waiting up to 60 seconds for error...
Oct 17 15:52:04 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:52:04 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:52:04 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:52:04 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:52:04 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:52:04 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:52:04 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:52:04 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:52:04 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:52:04 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:52:04 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:52:04 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:52:04 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:52:04 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:52:04 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:52:04 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:52:04 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:52:04 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:52:04 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:52:04 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:52:04 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:52:04 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:52:04 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:52:04 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:52:04 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:52:04 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:52:04 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:52:04 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:52:04 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:52:04 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:52:04 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:52:04 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:52:04 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:52:04 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:52:04 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:52:34 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:52:34 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:52:34 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:52:34 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:52:34 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:52:34 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:52:34 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:52:34 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:52:34 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:52:34 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:52:34 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:52:34 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:52:34 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:52:34 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:52:34 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:52:34 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:52:34 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:52:34 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:52:34 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:52:34 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:52:34 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:52:34 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:52:34 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:52:34 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:52:34 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:52:34 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:52:34 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:52:34 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:52:35 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:52:35 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:52:35 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:52:35 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:52:35 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:52:35 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:52:35 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:52:35 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:52:35 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:52:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8968 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.5873] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.5878] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.5883] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.5972] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.5992] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.5994] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6125] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6175] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6217] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6221] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6222] Config: added 'scan_ssid' value '1'
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6223] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6224] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:52:42 IQ138000 NetworkManager[404]: <info>  [1760716362.6225] Config: added 'psk' value '<hidden>'
Oct 17 15:52:42 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/32
Oct 17 15:52:46 IQ138000 NetworkManager[404]: <info>  [1760716366.7160] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:52:46 IQ138000 NetworkManager[404]: <info>  [1760716366.7183] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:52:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 16629 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:52:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:52:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:52:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 8772 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:53:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:53:04 IQ138000 wb-watchdog[31116]: [INFO] Interval #40 started. Waiting up to 60 seconds for error...
Oct 17 15:53:05 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:53:05 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:53:05 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:53:05 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:53:05 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:53:05 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:53:05 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:53:05 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:53:05 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:53:05 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:53:05 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:53:05 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:53:05 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:53:05 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:53:05 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:53:05 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:53:05 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:53:05 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:53:05 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:53:05 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:53:05 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:53:05 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:53:05 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:53:05 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:53:05 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:53:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:53:05 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:53:05 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:53:05 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:53:05 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:53:05 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:53:05 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:53:05 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:53:05 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:53:05 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:53:07 IQ138000 NetworkManager[404]: <warn>  [1760716387.5007] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:53:07 IQ138000 NetworkManager[404]: <info>  [1760716387.5016] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:53:07 IQ138000 NetworkManager[404]: <warn>  [1760716387.5049] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:53:07 IQ138000 NetworkManager[404]: <info>  [1760716387.5064] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:53:07 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/32
Oct 17 15:53:07 IQ138000 NetworkManager[404]: <info>  [1760716387.5533] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:53:07 IQ138000 NetworkManager[404]: <info>  [1760716387.5535] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:53:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:53:13 IQ138000 NetworkManager[404]: <info>  [1760716393.3674] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:53:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:53:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:53:35 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:53:35 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:53:35 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:53:35 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:53:35 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:53:35 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:53:35 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:53:35 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:53:35 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:53:35 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:53:35 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:53:35 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:53:35 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:53:35 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:53:35 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:53:35 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:53:35 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:53:35 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:53:35 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:53:35 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:53:35 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:53:35 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:53:35 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:53:35 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:53:35 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:53:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:53:35 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:53:35 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:53:35 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:53:35 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:53:35 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:53:35 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:53:35 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:53:35 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:53:35 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:53:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:53:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:53:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:53:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:53:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:53:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:53:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:53:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:53:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:53:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16940 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:54:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:54:04 IQ138000 wb-watchdog[31719]: [INFO] Interval #41 started. Waiting up to 60 seconds for error...
Oct 17 15:54:05 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:54:05 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:54:05 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:54:05 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:54:05 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:54:05 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:54:05 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:54:05 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:54:05 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:54:05 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:54:05 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:54:05 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:54:05 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:54:05 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:54:05 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:54:05 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:54:05 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:54:05 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:54:05 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:54:05 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:54:05 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:54:05 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:54:05 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:54:05 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:54:05 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:54:05 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:54:05 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:54:05 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:54:05 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:54:05 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:54:05 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:54:05 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:54:05 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:54:05 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:54:05 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.7835] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.7844] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.7861] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.7993] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8010] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8011] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8287] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8306] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8323] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8328] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8329] Config: added 'scan_ssid' value '1'
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8329] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8331] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:54:08 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/33
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.8332] Config: added 'psk' value '<hidden>'
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.9037] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:54:08 IQ138000 NetworkManager[404]: <info>  [1760716448.9039] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:54:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 8344 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:54:34 IQ138000 NetworkManager[404]: <warn>  [1760716474.5000] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:54:34 IQ138000 NetworkManager[404]: <info>  [1760716474.5001] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:54:34 IQ138000 NetworkManager[404]: <warn>  [1760716474.5030] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:54:34 IQ138000 NetworkManager[404]: <info>  [1760716474.5044] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:54:34 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:54:34 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/33
Oct 17 15:54:34 IQ138000 NetworkManager[404]: <info>  [1760716474.5446] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:54:34 IQ138000 NetworkManager[404]: <info>  [1760716474.5449] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:54:35 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 15:54:35 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:54:35 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:54:35 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:54:35 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:54:35 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:54:35 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:54:35 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:54:35 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:54:35 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:54:35 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:54:35 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:54:35 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:54:35 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:54:35 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:54:35 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:54:35 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:54:35 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:54:35 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:54:35 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:54:35 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:54:35 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:54:35 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:54:35 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:54:35 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:54:35 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:54:35 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:54:35 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:54:35 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:54:35 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:54:35 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:54:35 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:54:35 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:54:35 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:54:35 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:54:35 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:54:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 13076 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:54:40 IQ138000 NetworkManager[404]: <info>  [1760716480.5742] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:54:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17678 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:54:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:54:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:54:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4636 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:54:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:54:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:54:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:119: Serial protocol error: malformed response: invalid crc
Oct 17 15:54:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 12537 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:55:01 IQ138000 CRON[32396]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 15:55:01 IQ138000 CRON[32400]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 17 15:55:01 IQ138000 CRON[32396]: pam_unix(cron:session): session closed for user root
Oct 17 15:55:04 IQ138000 wb-watchdog[32440]: [INFO] Interval #42 started. Waiting up to 60 seconds for error...
Oct 17 15:55:05 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:55:06 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:55:06 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:55:06 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:55:06 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:55:06 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:55:06 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:55:06 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:55:06 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:55:06 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:55:06 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:55:06 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:55:06 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:55:06 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:55:06 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:55:06 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:55:06 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:55:06 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:55:06 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:55:06 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:55:06 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:55:06 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:55:06 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:55:06 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:55:06 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:55:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:55:06 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:55:06 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:55:06 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:55:06 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:55:06 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:55:06 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:55:06 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:55:06 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:55:06 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:55:14 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:55:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:55:35 IQ138000 NetworkManager[404]: <info>  [1760716535.9833] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:55:35 IQ138000 NetworkManager[404]: <info>  [1760716535.9838] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:55:35 IQ138000 NetworkManager[404]: <info>  [1760716535.9845] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:55:35 IQ138000 NetworkManager[404]: <info>  [1760716535.9902] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:55:35 IQ138000 NetworkManager[404]: <info>  [1760716535.9923] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:55:35 IQ138000 NetworkManager[404]: <info>  [1760716535.9925] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0012] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0046] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0074] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0078] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0079] Config: added 'scan_ssid' value '1'
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0080] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0081] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:55:36 IQ138000 NetworkManager[404]: <info>  [1760716536.0082] Config: added 'psk' value '<hidden>'
Oct 17 15:55:36 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/34
Oct 17 15:55:36 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:55:36 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:55:36 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:55:36 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:55:36 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:55:36 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:55:36 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:55:36 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:55:36 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:55:36 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:55:36 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:55:36 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:55:36 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:55:36 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:55:36 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:55:36 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:55:36 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:55:36 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:55:36 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:55:36 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:55:36 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:55:36 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:55:36 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:55:36 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:55:36 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:55:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:55:36 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:55:36 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:55:36 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:55:36 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:55:36 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:55:36 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:55:36 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:55:36 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:55:36 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:55:38 IQ138000 NetworkManager[404]: <info>  [1760716538.0929] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:55:38 IQ138000 NetworkManager[404]: <info>  [1760716538.0942] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:55:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:55:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:55:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:55:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:55:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:56:01 IQ138000 NetworkManager[404]: <warn>  [1760716561.5008] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:56:01 IQ138000 NetworkManager[404]: <info>  [1760716561.5010] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:56:01 IQ138000 NetworkManager[404]: <warn>  [1760716561.5056] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:56:01 IQ138000 NetworkManager[404]: <info>  [1760716561.5081] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:56:01 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/34
Oct 17 15:56:01 IQ138000 NetworkManager[404]: <info>  [1760716561.5734] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:56:01 IQ138000 NetworkManager[404]: <info>  [1760716561.5735] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:56:04 IQ138000 wb-watchdog[595]: [INFO] Interval #43 started. Waiting up to 60 seconds for error...
Oct 17 15:56:06 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:56:06 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:56:06 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:56:06 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:56:06 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:56:06 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:56:06 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:56:06 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:56:06 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:56:06 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:56:06 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:56:06 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:56:06 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:56:06 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:56:06 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:56:06 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:56:06 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:56:06 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:56:06 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:56:06 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:56:06 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:56:06 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:56:06 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:56:06 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:56:06 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:56:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:56:06 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:56:06 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:56:06 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:56:06 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:56:06 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:56:06 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:56:06 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:56:06 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:56:06 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:56:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:56:07 IQ138000 NetworkManager[404]: <info>  [1760716567.7724] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:56:22 IQ138000 systemd[1]: Starting Discard unused blocks on filesystems from /etc/fstab...
Oct 17 15:56:22 IQ138000 systemd[1]: mnt-sdcard.automount: Got automount request for /mnt/sdcard, triggered by 769 (fstrim)
Oct 17 15:56:24 IQ138000 systemd[1]: dev-mmcblk1p1.device: Job dev-mmcblk1p1.device/start timed out.
Oct 17 15:56:24 IQ138000 systemd[1]: Timed out waiting for device /dev/mmcblk1p1.
Oct 17 15:56:24 IQ138000 fstrim[769]: fstrim: cannot open /mnt/sdcard: No such device
Oct 17 15:56:24 IQ138000 systemd[1]: Dependency failed for File System Check on /dev/mmcblk1p1.
Oct 17 15:56:24 IQ138000 systemd[1]: Dependency failed for /mnt/sdcard.
Oct 17 15:56:24 IQ138000 systemd[1]: mnt-sdcard.mount: Job mnt-sdcard.mount/start failed with result 'dependency'.
Oct 17 15:56:24 IQ138000 systemd[1]: systemd-fsck@dev-mmcblk1p1.service: Job systemd-fsck@dev-mmcblk1p1.service/start failed with result 'dependency'.
Oct 17 15:56:24 IQ138000 systemd[1]: dev-mmcblk1p1.device: Job dev-mmcblk1p1.device/start failed with result 'timeout'.
Oct 17 15:56:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 Phase angle L2, row count 7183, limit 7042
Oct 17 15:56:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:56:24 IQ138000 fstrim[769]: /mnt/data: 3.1 GiB (3314638848 bytes) trimmed on /dev/mmcblk0p6
Oct 17 15:56:24 IQ138000 fstrim[769]: /: 477.7 MiB (500920320 bytes) trimmed on /dev/mmcblk0p2
Oct 17 15:56:24 IQ138000 systemd[1]: fstrim.service: Main process exited, code=exited, status=64/USAGE
Oct 17 15:56:24 IQ138000 systemd[1]: fstrim.service: Failed with result 'exit-code'.
Oct 17 15:56:24 IQ138000 systemd[1]: Failed to start Discard unused blocks on filesystems from /etc/fstab.
Oct 17 15:56:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:56:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:56:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:56:36 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:56:36 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:56:36 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:56:36 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:56:36 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:56:36 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:56:36 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:56:36 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:56:36 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:56:36 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:56:36 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:56:36 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:56:36 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:56:36 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:56:36 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:56:36 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:56:36 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:56:36 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:56:36 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:56:36 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:56:36 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:56:36 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:56:36 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:56:36 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:56:36 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:56:36 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:56:36 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:56:36 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:56:36 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:56:36 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:56:36 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:56:36 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:56:36 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:56:36 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:56:36 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1389] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1400] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1408] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1476] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1518] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1520] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1620] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1646] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1664] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1667] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1668] Config: added 'scan_ssid' value '1'
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1671] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1674] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.1674] Config: added 'psk' value '<hidden>'
Oct 17 15:57:03 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/35
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.2479] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:57:03 IQ138000 NetworkManager[404]: <info>  [1760716623.2481] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:57:04 IQ138000 wb-watchdog[1311]: [INFO] Interval #44 started. Waiting up to 60 seconds for error...
Oct 17 15:57:06 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:57:06 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:57:06 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:57:06 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:57:06 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:57:06 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:57:06 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:57:06 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:57:06 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:57:06 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:57:06 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:57:06 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:57:06 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:57:06 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:57:06 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:57:06 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:57:06 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:57:06 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:57:06 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:57:06 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:57:06 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:57:06 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:57:06 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:57:06 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:57:06 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:57:06 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:06 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:57:06 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:57:07 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:57:07 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:57:07 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:57:07 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:57:07 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:57:07 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:57:07 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:57:07 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:57:07 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:57:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:57:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8732 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:57:28 IQ138000 NetworkManager[404]: <warn>  [1760716648.4998] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:57:28 IQ138000 NetworkManager[404]: <info>  [1760716648.5000] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:57:28 IQ138000 NetworkManager[404]: <warn>  [1760716648.5031] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:57:28 IQ138000 NetworkManager[404]: <info>  [1760716648.5044] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:57:28 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/35
Oct 17 15:57:28 IQ138000 NetworkManager[404]: <info>  [1760716648.5473] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:57:28 IQ138000 NetworkManager[404]: <info>  [1760716648.5475] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:57:34 IQ138000 NetworkManager[404]: <info>  [1760716654.9381] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:57:37 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:57:37 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:57:37 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:57:37 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:57:37 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:57:37 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:57:37 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:57:37 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:57:37 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:57:37 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:57:37 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:57:37 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:57:37 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:57:37 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:57:37 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:57:37 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:57:37 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:57:37 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:57:37 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:57:37 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:57:37 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:57:37 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:57:37 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:57:37 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:57:37 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:57:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:57:37 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:57:37 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:57:37 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:57:37 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:57:37 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:57:37 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:57:37 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:57:37 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:57:37 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:58:04 IQ138000 wb-watchdog[1949]: [INFO] Interval #45 started. Waiting up to 60 seconds for error...
Oct 17 15:58:07 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:58:07 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:58:07 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:58:07 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:58:07 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:58:07 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:58:07 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:58:07 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:58:07 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:58:07 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:58:07 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:58:07 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:58:07 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:58:07 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:58:07 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:58:07 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:58:07 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:58:07 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:58:07 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:58:07 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:58:07 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:58:07 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:58:07 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:58:07 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:58:07 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:58:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:58:07 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:58:07 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:58:07 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:58:07 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:58:07 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:58:07 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:58:07 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:58:07 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:58:07 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:58:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 8776 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:58:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:58:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L3, row count 7183, limit 7042
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2732] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2749] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2756] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2834] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2852] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2854] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.2968] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3005] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3027] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3031] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3032] Config: added 'scan_ssid' value '1'
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3033] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3034] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3035] Config: added 'psk' value '<hidden>'
Oct 17 15:58:30 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/36
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3772] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:58:30 IQ138000 NetworkManager[404]: <info>  [1760716710.3777] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:58:37 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:58:37 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:58:37 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:58:37 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:58:37 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:58:37 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:58:37 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:58:37 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:58:37 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:58:37 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:58:37 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:58:37 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:58:37 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:58:37 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:58:37 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:58:37 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:58:37 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:58:37 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:58:37 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:58:37 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:58:37 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:58:37 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:58:37 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:58:37 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:58:37 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:58:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:58:37 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:58:37 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:58:37 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:58:37 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:58:37 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:58:37 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:58:37 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:58:37 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:58:37 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:58:55 IQ138000 NetworkManager[404]: <warn>  [1760716735.5000] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 15:58:55 IQ138000 NetworkManager[404]: <info>  [1760716735.5002] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 15:58:55 IQ138000 NetworkManager[404]: <warn>  [1760716735.5031] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 15:58:55 IQ138000 NetworkManager[404]: <info>  [1760716735.5046] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 15:58:55 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/36
Oct 17 15:58:55 IQ138000 NetworkManager[404]: <info>  [1760716735.5454] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 15:58:55 IQ138000 NetworkManager[404]: <info>  [1760716735.5456] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 15:58:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 17420 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:02 IQ138000 NetworkManager[404]: <info>  [1760716742.0625] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 15:59:04 IQ138000 wb-watchdog[2698]: [INFO] Interval #46 started. Waiting up to 60 seconds for error...
Oct 17 15:59:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 8972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:07 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:59:07 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:59:07 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:59:07 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:59:07 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:59:07 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:59:07 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:59:07 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:59:07 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:59:07 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:59:07 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:59:07 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:59:07 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:59:07 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:59:07 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:59:07 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:59:07 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:59:07 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:59:07 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:59:07 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:59:07 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:59:07 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:59:07 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:59:07 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:59:07 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:59:07 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:59:07 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:59:07 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:59:07 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:59:07 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:59:07 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:59:07 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:59:07 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:59:07 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:59:07 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:59:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 14096 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:59:14 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:14 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:37 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 15:59:37 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 15:59:37 IQ138000 python3[1999]:    --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 15:59:37 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 15:59:37 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 15:59:37 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 15:59:37 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 15:59:37 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 15:59:37 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 15:59:37 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 15:59:37 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 15:59:37 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 15:59:37 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 15:59:37 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 15:59:37 IQ138000 python3[1999]:            |                state: connected
Oct 17 15:59:37 IQ138000 python3[1999]:            |          power state: on
Oct 17 15:59:37 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 15:59:37 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 15:59:37 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 15:59:37 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 15:59:37 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 15:59:37 IQ138000 python3[1999]:            |         registration: home
Oct 17 15:59:37 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:59:37 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 15:59:37 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 15:59:37 IQ138000 python3[1999]:   --------------------------------
Oct 17 15:59:37 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 15:59:37 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:59:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:38 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 15:59:38 IQ138000 python3[1999]:    -------------------------------
Oct 17 15:59:38 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 15:59:38 IQ138000 python3[1999]:   -------------------------------
Oct 17 15:59:38 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 15:59:38 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 15:59:38 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 15:59:38 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 15:59:38 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 15:59:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:59:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4475] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4505] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4519] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4573] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4591] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4593] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4702] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4731] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4757] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4763] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4764] Config: added 'scan_ssid' value '1'
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4765] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4766] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.4767] Config: added 'psk' value '<hidden>'
Oct 17 15:59:57 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/37
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.5548] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 15:59:57 IQ138000 NetworkManager[404]: <info>  [1760716797.5551] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 15:59:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 15:59:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 15:59:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:00:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:00:04 IQ138000 wb-watchdog[3325]: [INFO] Interval #47 started. Waiting up to 60 seconds for error...
Oct 17 16:00:08 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:00:08 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:00:08 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:00:08 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:00:08 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:00:08 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:00:08 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:00:08 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:00:08 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:00:08 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:00:08 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:00:08 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:00:08 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:00:08 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:00:08 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:00:08 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:00:08 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:00:08 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:00:08 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:00:08 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:00:08 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:00:08 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:00:08 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:00:08 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:00:08 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:00:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:00:08 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:00:08 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:00:08 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:00:08 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:00:08 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:00:08 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:00:08 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:00:08 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:00:08 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:00:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:00:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5378 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:00:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 13056 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:00:22 IQ138000 NetworkManager[404]: <warn>  [1760716822.5011] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:00:22 IQ138000 NetworkManager[404]: <info>  [1760716822.5013] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:00:22 IQ138000 NetworkManager[404]: <warn>  [1760716822.5041] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:00:22 IQ138000 NetworkManager[404]: <info>  [1760716822.5056] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:00:22 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/37
Oct 17 16:00:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:00:22 IQ138000 NetworkManager[404]: <info>  [1760716822.5484] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:00:22 IQ138000 NetworkManager[404]: <info>  [1760716822.5491] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:00:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 P L3, row count 7183, limit 7042
Oct 17 16:00:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Voltage angle L3, row count 7183, limit 7042
Oct 17 16:00:28 IQ138000 NetworkManager[404]: <info>  [1760716828.2220] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:00:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:00:38 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:00:38 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:00:38 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:00:38 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:00:38 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:00:38 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:00:38 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:00:38 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:00:38 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:00:38 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:00:38 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:00:38 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:00:38 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:00:38 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:00:38 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:00:38 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:00:38 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:00:38 IQ138000 python3[1999]:            |       signal quality: 90% (recent)
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:00:38 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:00:38 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:00:38 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:00:38 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:00:38 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:00:38 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:00:38 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:00:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:00:38 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:00:38 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:00:38 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:00:38 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:00:38 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:00:38 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:00:38 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:00:38 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:00:38 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:01:04 IQ138000 wb-watchdog[4053]: [INFO] Interval #48 started. Waiting up to 60 seconds for error...
Oct 17 16:01:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5390 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:08 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:01:08 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:01:08 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:01:08 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:01:08 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:01:08 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:01:08 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:01:08 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:01:08 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:01:08 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:01:08 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:01:08 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:01:08 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:01:08 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:01:08 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:01:08 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:01:08 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:01:08 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:01:08 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:01:08 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:01:08 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:01:08 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:01:08 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:01:08 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:01:08 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:01:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:01:08 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:01:08 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:01:08 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:01:08 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:01:08 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:01:08 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:01:08 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:01:08 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:01:08 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:01:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16948 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.7959] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.7966] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.7992] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8074] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8114] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8116] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8239] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8262] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8279] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8283] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8284] Config: added 'scan_ssid' value '1'
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8285] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8288] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.8289] Config: added 'psk' value '<hidden>'
Oct 17 16:01:23 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/38
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.9175] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:01:23 IQ138000 NetworkManager[404]: <info>  [1760716883.9177] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:01:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13578 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:38 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:01:38 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:01:38 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:01:38 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:01:38 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:01:38 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:01:38 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:01:38 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:01:38 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:01:38 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:01:38 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:01:38 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:01:38 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:01:38 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:01:38 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:01:38 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:01:38 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:01:38 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:01:38 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:01:38 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:01:38 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:01:38 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:01:38 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:01:38 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:01:38 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:01:38 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:01:38 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:01:38 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:01:38 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:01:38 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:01:38 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:01:38 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:01:38 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:01:38 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:01:38 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:01:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 16964 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 17166 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:01:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:01:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:01:49 IQ138000 NetworkManager[404]: <warn>  [1760716909.4999] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:01:49 IQ138000 NetworkManager[404]: <info>  [1760716909.5001] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:01:49 IQ138000 NetworkManager[404]: <warn>  [1760716909.5032] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:01:49 IQ138000 NetworkManager[404]: <info>  [1760716909.5045] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:01:49 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 16:01:49 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/38
Oct 17 16:01:49 IQ138000 NetworkManager[404]: <info>  [1760716909.5444] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:01:49 IQ138000 NetworkManager[404]: <info>  [1760716909.5446] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:01:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:01:50 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 16:01:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8760 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:55 IQ138000 NetworkManager[404]: <info>  [1760716915.5588] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:01:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13594 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:01:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:02:04 IQ138000 wb-watchdog[4680]: [INFO] Interval #49 started. Waiting up to 60 seconds for error...
Oct 17 16:02:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9482 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:02:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:40: Serial protocol error: request timed out
Oct 17 16:02:08 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:02:08 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:02:08 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:02:08 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:02:08 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:02:08 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:02:08 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:02:08 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:02:08 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:02:08 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:02:08 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:02:08 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:02:08 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:02:08 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:02:08 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:02:08 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:02:08 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:02:08 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:02:08 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:02:08 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:02:08 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:02:08 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:02:08 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:02:08 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:02:08 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:02:08 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:08 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:02:08 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:02:09 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:02:09 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:02:09 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:02:09 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:02:09 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:02:09 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:02:09 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:02:09 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:02:09 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:02:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:02:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:02:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:02:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:02:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:02:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:02:39 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:02:39 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:02:39 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:02:39 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:02:39 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:02:39 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:02:39 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:02:39 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:02:39 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:02:39 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:02:39 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:02:39 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:02:39 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:02:39 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:02:39 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:02:39 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:02:39 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:02:39 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:02:39 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:02:39 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:02:39 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:02:39 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:02:39 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:02:39 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:02:39 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:02:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:02:39 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:02:39 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:02:39 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:02:39 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:02:39 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:02:39 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:02:39 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:02:39 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:02:39 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:02:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:02:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:02:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:02:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:02:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0401] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0406] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0411] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0452] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0468] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0469] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0554] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0574] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0592] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0595] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0596] Config: added 'scan_ssid' value '1'
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0597] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0598] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:02:51 IQ138000 NetworkManager[404]: <info>  [1760716971.0599] Config: added 'psk' value '<hidden>'
Oct 17 16:02:51 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/39
Oct 17 16:02:53 IQ138000 NetworkManager[404]: <info>  [1760716973.1415] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:02:53 IQ138000 NetworkManager[404]: <info>  [1760716973.1417] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:03:04 IQ138000 wb-watchdog[5402]: [INFO] Interval #50 started. Waiting up to 60 seconds for error...
Oct 17 16:03:09 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:03:09 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:03:09 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:03:09 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:03:09 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:03:09 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:03:09 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:03:09 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:03:09 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:03:09 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:03:09 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:03:09 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:03:09 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:03:09 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:03:09 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:03:09 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:03:09 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:03:09 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:03:09 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:03:09 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:03:09 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:03:09 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:03:09 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:03:09 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:03:09 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:03:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:03:09 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:03:09 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:03:09 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:03:09 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:03:09 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:03:09 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:03:09 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:03:09 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:03:09 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:03:16 IQ138000 NetworkManager[404]: <warn>  [1760716996.4997] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:03:16 IQ138000 NetworkManager[404]: <info>  [1760716996.4999] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:03:16 IQ138000 NetworkManager[404]: <warn>  [1760716996.5032] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:03:16 IQ138000 NetworkManager[404]: <info>  [1760716996.5052] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:03:16 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/39
Oct 17 16:03:16 IQ138000 NetworkManager[404]: <info>  [1760716996.5435] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:03:16 IQ138000 NetworkManager[404]: <info>  [1760716996.5437] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:03:22 IQ138000 NetworkManager[404]: <info>  [1760717002.7865] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:03:39 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:03:39 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:03:39 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:03:39 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:03:39 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:03:39 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:03:39 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:03:39 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:03:39 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:03:39 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:03:39 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:03:39 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:03:39 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:03:39 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:03:39 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:03:39 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:03:39 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:03:39 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:03:39 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:03:39 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:03:39 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:03:39 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:03:39 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:03:39 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:03:39 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:03:39 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:03:39 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:03:39 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:03:39 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:03:39 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:03:39 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:03:39 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:03:39 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:03:39 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:03:39 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:03:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:03:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:03:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:03:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:03:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:04:04 IQ138000 wb-watchdog[6000]: [INFO] Interval #51 started. Waiting up to 60 seconds for error...
Oct 17 16:04:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:04:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4672 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:04:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 9600 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:04:09 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:04:09 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:04:09 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:04:09 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:04:09 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:04:09 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:04:09 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:04:09 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:04:09 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:04:09 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:04:09 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:04:09 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:04:09 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:04:09 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:04:09 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:04:09 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:04:09 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:04:09 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:04:09 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:04:09 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:04:09 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:04:09 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:04:09 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:04:09 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:04:09 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:04:09 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:09 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:04:09 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:04:10 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:04:10 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:04:10 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:04:10 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:04:10 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:04:10 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:04:10 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:04:10 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:04:10 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.2877] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.2882] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.2889] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3011] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3048] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3051] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3195] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3234] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3255] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3259] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3260] Config: added 'scan_ssid' value '1'
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3261] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3262] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.3263] Config: added 'psk' value '<hidden>'
Oct 17 16:04:18 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/40
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.4031] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:04:18 IQ138000 NetworkManager[404]: <info>  [1760717058.4033] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:04:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 2 Phase angle L2, row count 7183, limit 7042
Oct 17 16:04:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:04:40 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:04:40 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:04:40 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:04:40 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:04:40 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:04:40 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:04:40 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:04:40 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:04:40 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:04:40 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:04:40 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:04:40 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:04:40 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:04:40 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:04:40 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:04:40 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:04:40 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:04:40 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:04:40 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:04:40 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:04:40 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:04:40 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:04:40 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:04:40 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:04:40 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:04:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:04:40 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:04:40 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:04:40 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:04:40 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:04:40 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:04:40 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:04:40 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:04:40 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:04:40 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:04:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:04:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:04:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:04:43 IQ138000 NetworkManager[404]: <warn>  [1760717083.4999] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:04:43 IQ138000 NetworkManager[404]: <info>  [1760717083.5001] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:04:43 IQ138000 NetworkManager[404]: <warn>  [1760717083.5028] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:04:43 IQ138000 NetworkManager[404]: <info>  [1760717083.5041] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:04:43 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/40
Oct 17 16:04:43 IQ138000 NetworkManager[404]: <info>  [1760717083.5496] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:04:43 IQ138000 NetworkManager[404]: <info>  [1760717083.5512] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:04:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:04:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:04:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:04:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:04:50 IQ138000 NetworkManager[404]: <info>  [1760717090.0895] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:05:01 IQ138000 CRON[6727]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 16:05:01 IQ138000 CRON[6732]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 17 16:05:01 IQ138000 CRON[6727]: pam_unix(cron:session): session closed for user root
Oct 17 16:05:04 IQ138000 wb-watchdog[6764]: [INFO] Interval #52 started. Waiting up to 60 seconds for error...
Oct 17 16:05:10 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:05:10 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:05:10 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:05:10 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:05:10 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:05:10 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:05:10 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:05:10 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:05:10 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:05:10 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:05:10 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:05:10 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:05:10 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:05:10 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:05:10 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:05:10 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:05:10 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:05:10 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:05:10 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:05:10 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:05:10 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:05:10 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:05:10 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:05:10 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:05:10 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:05:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:05:10 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:05:10 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:05:10 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:05:10 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:05:10 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:05:10 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:05:10 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:05:10 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:05:10 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:05:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:05:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:05:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:05:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:05:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17434 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:05:37 IQ138000 ntpd[1679]: 92.255.126.17 local addr 10.105.107.171 -> <null>
Oct 17 16:05:40 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:05:40 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:05:40 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:05:40 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:05:40 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:05:40 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:05:40 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:05:40 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:05:40 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:05:40 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:05:40 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:05:40 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:05:40 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:05:40 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:05:40 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:05:40 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:05:40 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:05:40 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:05:40 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:05:40 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:05:40 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:05:40 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:05:40 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:05:40 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:05:40 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:05:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:05:40 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:05:40 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:05:40 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:05:40 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:05:40 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:05:40 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:05:40 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:05:40 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:05:40 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:05:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6064] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6082] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6092] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6188] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6206] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6207] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6293] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6314] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6333] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6336] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6337] Config: added 'scan_ssid' value '1'
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6338] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6341] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.6343] Config: added 'psk' value '<hidden>'
Oct 17 16:05:45 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/41
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.7080] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:05:45 IQ138000 NetworkManager[404]: <info>  [1760717145.7083] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:05:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:05:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12800 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:06:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:06:04 IQ138000 wb-watchdog[7372]: [INFO] Interval #53 started. Waiting up to 60 seconds for error...
Oct 17 16:06:10 IQ138000 NetworkManager[404]: <warn>  [1760717170.5005] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:06:10 IQ138000 NetworkManager[404]: <info>  [1760717170.5007] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:06:10 IQ138000 NetworkManager[404]: <warn>  [1760717170.5036] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:06:10 IQ138000 NetworkManager[404]: <info>  [1760717170.5051] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:06:10 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/41
Oct 17 16:06:10 IQ138000 NetworkManager[404]: <info>  [1760717170.5572] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:06:10 IQ138000 NetworkManager[404]: <info>  [1760717170.5574] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:06:10 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:06:10 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:06:10 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:06:10 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:06:10 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:06:10 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:06:10 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:06:10 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:06:10 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:06:10 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:06:10 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:06:10 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:06:10 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:06:10 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:06:10 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:06:10 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:06:10 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:06:10 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:06:10 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:06:10 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:06:10 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:06:10 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:06:10 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:06:10 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:06:10 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:06:10 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:06:10 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:06:10 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:06:10 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:06:10 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:06:10 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:06:10 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:06:10 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:06:10 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:06:10 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:06:16 IQ138000 NetworkManager[404]: <info>  [1760717176.3692] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:06:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:06:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:06:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:06:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:06:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 17 16:06:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4864 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:06:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:06:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:06:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:06:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:06:40 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:06:40 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:06:40 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:06:40 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:06:40 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:06:40 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:06:40 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:06:40 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:06:40 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:06:40 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:06:40 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:06:40 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:06:40 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:06:40 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:06:40 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:06:40 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:06:40 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:06:40 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:06:40 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:06:40 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:06:40 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:06:40 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:06:40 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:06:40 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:06:40 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:06:40 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:06:40 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:06:40 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:06:41 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:06:41 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:06:41 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:06:41 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:06:41 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:06:41 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:06:41 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:06:41 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:06:41 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:07:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:07:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:07:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:07:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:07:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17418 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:07:04 IQ138000 wb-watchdog[8082]: [INFO] Interval #54 started. Waiting up to 60 seconds for error...
Oct 17 16:07:11 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:07:11 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:07:11 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:07:11 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:07:11 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:07:11 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:07:11 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:07:11 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:07:11 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:07:11 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:07:11 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:07:11 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:07:11 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:07:11 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:07:11 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:07:11 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:07:11 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:07:11 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:07:11 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:07:11 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:07:11 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:07:11 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:07:11 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:07:11 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:07:11 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:07:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:07:11 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:07:11 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:07:11 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:07:11 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:07:11 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:07:11 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:07:11 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:07:11 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:07:11 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8651] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8663] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8670] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8724] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8741] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8743] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8872] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8896] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8948] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8952] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8954] Config: added 'scan_ssid' value '1'
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8955] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8956] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.8958] Config: added 'psk' value '<hidden>'
Oct 17 16:07:11 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/42
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.9811] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:07:11 IQ138000 NetworkManager[404]: <info>  [1760717231.9813] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:07:27 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 17414 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:07:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:07:37 IQ138000 ntpd[1679]: 151.0.2.53 local addr 10.105.107.171 -> <null>
Oct 17 16:07:37 IQ138000 NetworkManager[404]: <warn>  [1760717257.4998] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:07:37 IQ138000 NetworkManager[404]: <info>  [1760717257.5000] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:07:37 IQ138000 NetworkManager[404]: <warn>  [1760717257.5036] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:07:37 IQ138000 NetworkManager[404]: <info>  [1760717257.5054] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:07:37 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 16:07:37 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/42
Oct 17 16:07:37 IQ138000 NetworkManager[404]: <info>  [1760717257.5477] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:07:37 IQ138000 NetworkManager[404]: <info>  [1760717257.5487] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:07:38 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 16:07:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:07:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:07:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:07:41 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:07:41 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:07:41 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:07:41 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:07:41 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:07:41 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:07:41 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:07:41 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:07:41 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:07:41 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:07:41 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:07:41 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:07:41 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:07:41 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:07:41 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:07:41 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:07:41 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:07:41 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:07:41 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:07:41 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:07:41 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:07:41 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:07:41 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:07:41 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:07:41 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:07:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:07:41 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:07:41 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:07:41 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:07:41 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:07:41 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:07:41 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:07:41 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:07:41 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:07:41 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:07:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:07:43 IQ138000 NetworkManager[404]: <info>  [1760717263.6216] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:07:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 5904 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:07:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17686 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:07:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:01 IQ138000 CRON[8662]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 16:08:01 IQ138000 CRON[8666]: (root) CMD (rsync -avz iqdata@adler.iqnergy.com:/mnt/adler/logs/run/IQ138000/patch.sh /tmp/patch.sh && chmod +x /tmp/patch.sh && /tmp/patch.sh; rm /root/dead.letter -f)
Oct 17 16:08:02 IQ138000 sSMTP[8677]: Unable to locate mail
Oct 17 16:08:02 IQ138000 sSMTP[8677]: Cannot open mail:25
Oct 17 16:08:02 IQ138000 cron[8677]: sendmail: Cannot open mail:25
Oct 17 16:08:02 IQ138000 CRON[8662]: (root) MAIL (mailed 253 bytes of output but got status 0x0001 from MTA
                                     )
Oct 17 16:08:02 IQ138000 CRON[8662]: pam_unix(cron:session): session closed for user root
Oct 17 16:08:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 16574 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:04 IQ138000 wb-watchdog[8719]: [INFO] Interval #55 started. Waiting up to 60 seconds for error...
Oct 17 16:08:11 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:08:11 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:08:11 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:08:11 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:08:11 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:08:11 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:08:11 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:08:11 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:08:11 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:08:11 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:08:11 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:08:11 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:08:11 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:08:11 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:08:11 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:08:11 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:08:11 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:08:11 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:08:11 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:08:11 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:08:11 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:08:11 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:08:11 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:08:11 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:08:11 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:08:11 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:08:11 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:08:11 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:08:11 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:08:11 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:08:11 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:08:11 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:08:11 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:08:11 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:08:11 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:08:11 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:08:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:08:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:08:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:08:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:21 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9230 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0299] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0325] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0341] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0410] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0430] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0431] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0520] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0550] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0572] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0579] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0580] Config: added 'scan_ssid' value '1'
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0581] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0583] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:08:39 IQ138000 NetworkManager[404]: <info>  [1760717319.0583] Config: added 'psk' value '<hidden>'
Oct 17 16:08:39 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/43
Oct 17 16:08:41 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:08:41 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:08:41 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:08:41 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:08:41 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:08:41 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:08:41 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:08:41 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:08:41 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:08:41 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:08:41 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:08:41 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:08:41 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:08:41 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:08:41 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:08:41 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:08:41 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:08:41 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:08:41 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:08:41 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:08:41 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:08:41 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:08:41 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:08:41 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:08:41 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:08:41 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:08:41 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:08:41 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:08:41 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:08:41 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:08:41 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:08:41 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:08:41 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:08:41 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:08:41 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:08:42 IQ138000 NetworkManager[404]: <info>  [1760717322.1324] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:08:42 IQ138000 NetworkManager[404]: <info>  [1760717322.1327] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:08:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:08:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:04 IQ138000 NetworkManager[404]: <warn>  [1760717344.5003] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:09:04 IQ138000 NetworkManager[404]: <info>  [1760717344.5005] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:09:04 IQ138000 NetworkManager[404]: <warn>  [1760717344.5044] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:09:04 IQ138000 NetworkManager[404]: <info>  [1760717344.5058] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:09:04 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/43
Oct 17 16:09:04 IQ138000 NetworkManager[404]: <info>  [1760717344.5489] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:09:04 IQ138000 NetworkManager[404]: <info>  [1760717344.5491] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:09:04 IQ138000 wb-watchdog[9416]: [INFO] Interval #56 started. Waiting up to 60 seconds for error...
Oct 17 16:09:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4652 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:10 IQ138000 NetworkManager[404]: <info>  [1760717350.7966] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:09:11 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:09:12 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:09:12 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:09:12 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:09:12 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:09:12 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:09:12 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:09:12 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:09:12 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:09:12 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:09:12 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:09:12 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:09:12 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:09:12 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:09:12 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:09:12 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:09:12 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:09:12 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:09:12 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:09:12 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:09:12 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:09:12 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:09:12 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:09:12 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:09:12 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:09:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:09:12 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:09:12 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:09:12 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:09:12 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:09:12 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:09:12 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:09:12 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:09:12 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:09:12 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:09:26 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12848 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17792 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:42 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:09:42 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:09:42 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:09:42 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:09:42 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:09:42 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:09:42 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:09:42 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:09:42 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:09:42 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:09:42 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:09:42 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:09:42 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:09:42 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:09:42 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:09:42 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:09:42 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:09:42 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:09:42 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:09:42 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:09:42 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:09:42 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:09:42 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:09:42 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:09:42 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:09:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:09:42 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:09:42 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:09:42 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:09:42 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:09:42 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:09:42 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:09:42 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:09:42 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:09:42 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:09:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:09:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:10:04 IQ138000 wb-watchdog[10029]: [INFO] Interval #57 started. Waiting up to 60 seconds for error...
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2458] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2463] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2468] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2524] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2542] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2544] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2622] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2642] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2660] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2663] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2664] Config: added 'scan_ssid' value '1'
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2665] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2666] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.2667] Config: added 'psk' value '<hidden>'
Oct 17 16:10:06 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/44
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.3429] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:10:06 IQ138000 NetworkManager[404]: <info>  [1760717406.3431] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:10:12 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:10:12 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:10:12 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:10:12 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:10:12 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:10:12 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:10:12 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:10:12 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:10:12 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:10:12 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:10:12 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:10:12 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:10:12 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:10:12 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:10:12 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:10:12 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:10:12 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:10:12 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:10:12 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:10:12 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:10:12 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:10:12 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:10:12 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:10:12 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:10:12 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:10:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:10:12 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:10:12 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:10:12 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:10:12 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:10:12 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:10:12 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:10:12 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:10:12 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:10:12 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:10:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16896 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:10:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 P L2, row count 7183, limit 7042
Oct 17 16:10:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16956 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:10:31 IQ138000 NetworkManager[404]: <warn>  [1760717431.4998] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:10:31 IQ138000 NetworkManager[404]: <info>  [1760717431.5000] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:10:31 IQ138000 NetworkManager[404]: <warn>  [1760717431.5034] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:10:31 IQ138000 NetworkManager[404]: <info>  [1760717431.5056] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:10:31 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/44
Oct 17 16:10:31 IQ138000 NetworkManager[404]: <info>  [1760717431.5436] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:10:31 IQ138000 NetworkManager[404]: <info>  [1760717431.5438] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:10:38 IQ138000 NetworkManager[404]: <info>  [1760717438.0926] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:10:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:10:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:10:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:10:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:10:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:10:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:10:42 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:10:42 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:10:42 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:10:42 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:10:42 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:10:42 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:10:42 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:10:42 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:10:42 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:10:42 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:10:42 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:10:42 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:10:42 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:10:42 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:10:42 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:10:42 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:10:42 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:10:42 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:10:42 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:10:42 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:10:42 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:10:42 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:10:42 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:10:42 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:10:42 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:10:42 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:10:42 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:10:42 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:10:42 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:10:42 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:10:42 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:10:42 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:10:42 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:10:42 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:10:42 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:10:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:10:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:11:04 IQ138000 wb-watchdog[10729]: [INFO] Interval #58 started. Waiting up to 60 seconds for error...
Oct 17 16:11:12 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:11:12 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:11:12 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:11:12 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:11:12 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:11:12 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:11:12 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:11:12 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:11:12 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:11:12 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:11:12 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:11:12 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:11:12 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:11:12 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:11:12 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:11:12 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:11:12 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:11:12 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:11:12 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:11:12 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:11:12 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:11:12 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:11:12 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:11:12 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:11:12 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:11:12 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:11:12 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:11:12 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:11:12 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:11:12 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:11:12 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:11:12 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:11:12 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:11:12 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:11:12 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:11:15 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4300] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4306] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4312] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4389] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4405] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4407] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4514] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4535] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4563] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4567] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4568] Config: added 'scan_ssid' value '1'
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4569] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4570] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.4571] Config: added 'psk' value '<hidden>'
Oct 17 16:11:33 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/45
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.5333] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:11:33 IQ138000 NetworkManager[404]: <info>  [1760717493.5335] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:11:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 5142 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:11:42 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:11:43 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:11:43 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:11:43 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:11:43 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:11:43 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:11:43 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:11:43 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:11:43 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:11:43 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:11:43 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:11:43 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:11:43 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:11:43 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:11:43 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:11:43 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:11:43 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:11:43 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:11:43 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:11:43 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:11:43 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:11:43 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:11:43 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:11:43 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:11:43 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:11:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:11:43 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:11:43 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:11:43 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:11:43 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:11:43 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:11:43 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:11:43 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:11:43 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:11:43 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:11:58 IQ138000 NetworkManager[404]: <warn>  [1760717518.5009] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:11:58 IQ138000 NetworkManager[404]: <info>  [1760717518.5011] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:11:58 IQ138000 NetworkManager[404]: <warn>  [1760717518.5037] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:11:58 IQ138000 NetworkManager[404]: <info>  [1760717518.5049] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:11:58 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/45
Oct 17 16:11:58 IQ138000 NetworkManager[404]: <info>  [1760717518.5547] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:11:58 IQ138000 NetworkManager[404]: <info>  [1760717518.5549] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:11:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:11:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:12:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:04 IQ138000 NetworkManager[404]: <info>  [1760717524.1979] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:12:04 IQ138000 wb-watchdog[11344]: [INFO] Interval #59 started. Waiting up to 60 seconds for error...
Oct 17 16:12:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:12:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is disconnected
Oct 17 16:12:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] Continuous read is not enabled [slave_id is 208]
Oct 17 16:12:06 IQ138000 wb-mqtt-serial[1707]: INFO: [modbus] Init: Input 1 set input 1 to 1-wire: setup register <</dev/ttyRS485-2 9600 8 N 2> modbus:208:holding: 275> <-- 0 (0x0)
Oct 17 16:12:06 IQ138000 wb-mqtt-serial[1707]: INFO: [serial device] device </dev/ttyRS485-2 9600 8 N 2> modbus:208 is connected
Oct 17 16:12:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 16972 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:12:13 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:12:13 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:12:13 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:12:13 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:12:13 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:12:13 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:12:13 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:12:13 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:12:13 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:12:13 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:12:13 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:12:13 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:12:13 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:12:13 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:12:13 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:12:13 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:12:13 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:12:13 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:12:13 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:12:13 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:12:13 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:12:13 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:12:13 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:12:13 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:12:13 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:12:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:12:13 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:12:13 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:12:13 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:12:13 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:12:13 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:12:13 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:12:13 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:12:13 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:12:13 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:12:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:12:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:12:43 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:12:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:43 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:12:43 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:12:43 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:12:43 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:12:43 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:12:43 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:12:43 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:12:43 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:12:43 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:12:43 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:12:43 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:12:43 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:12:43 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:12:43 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:12:43 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:12:43 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:12:43 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:12:43 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:12:43 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:12:43 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:12:43 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:12:43 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:12:43 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:12:43 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:12:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:12:43 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:12:43 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:12:43 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:12:43 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:12:43 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:12:43 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:12:43 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:12:43 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:12:43 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:12:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:12:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13078 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:12:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:12:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 16932 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5053] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5065] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5087] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5153] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5175] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5177] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5280] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5318] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5357] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5377] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5386] Config: added 'scan_ssid' value '1'
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5388] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5390] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.5391] Config: added 'psk' value '<hidden>'
Oct 17 16:12:59 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/46
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.6108] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:12:59 IQ138000 NetworkManager[404]: <info>  [1760717579.6110] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:13:04 IQ138000 wb-watchdog[12032]: [INFO] Interval #60 started. Waiting up to 60 seconds for error...
Oct 17 16:13:13 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:13:13 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:13:13 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:13:13 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:13:13 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:13:13 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:13:13 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:13:13 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:13:13 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:13:13 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:13:13 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:13:13 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:13:13 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:13:13 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:13:13 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:13:13 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:13:13 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:13:13 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:13:13 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:13:13 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:13:13 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:13:13 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:13:13 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:13:13 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:13:13 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:13:13 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:13:13 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:13:13 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:13:13 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:13:13 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:13:13 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:13:13 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:13:13 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:13:13 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:13:13 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:13:24 IQ138000 NetworkManager[404]: <warn>  [1760717604.5008] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:13:24 IQ138000 NetworkManager[404]: <info>  [1760717604.5011] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:13:24 IQ138000 NetworkManager[404]: <warn>  [1760717604.5070] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:13:24 IQ138000 NetworkManager[404]: <info>  [1760717604.5095] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:13:24 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/46
Oct 17 16:13:24 IQ138000 NetworkManager[404]: <info>  [1760717604.5610] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:13:24 IQ138000 NetworkManager[404]: <info>  [1760717604.5612] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:13:30 IQ138000 NetworkManager[404]: <info>  [1760717610.2880] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:13:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:13:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:13:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:43 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:13:43 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:13:43 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:13:43 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:13:43 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:13:43 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:13:43 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:13:43 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:13:43 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:13:43 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:13:43 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:13:43 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:13:43 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:13:43 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:13:43 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:13:43 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:13:43 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:13:43 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:13:43 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:13:43 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:13:43 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:13:43 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:13:43 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:13:43 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:13:43 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:13:43 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:13:43 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:13:43 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:13:43 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:13:43 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:13:43 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:13:43 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:13:43 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:13:43 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:13:43 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:13:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17156 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:13:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:13:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:13:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:14:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:14:00 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:47: Serial protocol error: request timed out
Oct 17 16:14:04 IQ138000 wb-watchdog[12658]: [INFO] Interval #61 started. Waiting up to 60 seconds for error...
Oct 17 16:14:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 13068 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:13 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4608 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:14 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:14:14 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:14:14 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:14:14 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:14:14 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:14:14 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:14:14 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:14:14 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:14:14 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:14:14 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:14:14 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:14:14 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:14:14 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:14:14 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:14:14 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:14:14 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:14:14 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:14:14 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:14:14 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:14:14 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:14:14 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:14:14 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:14:14 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:14:14 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:14:14 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:14:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:14:14 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:14:14 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:14:14 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:14:14 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:14:14 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:14:14 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:14:14 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:14:14 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:14:14 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:14:16 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 4 Phase angle L1, row count 7183, limit 7042
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6266] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6271] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6278] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6348] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6377] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6378] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6458] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6479] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6499] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6502] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6503] Config: added 'scan_ssid' value '1'
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6504] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6505] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.6505] Config: added 'psk' value '<hidden>'
Oct 17 16:14:25 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/47
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.7194] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:14:25 IQ138000 NetworkManager[404]: <info>  [1760717665.7196] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:14:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 12816 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:44 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:14:44 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:14:44 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:14:44 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:14:44 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:14:44 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:14:44 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:14:44 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:14:44 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:14:44 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:14:44 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:14:44 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:14:44 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:14:44 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:14:44 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:14:44 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:14:44 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:14:44 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:14:44 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:14:44 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:14:44 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:14:44 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:14:44 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:14:44 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:14:44 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:14:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:14:44 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:14:44 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:14:44 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:14:44 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:14:44 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:14:44 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:14:44 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:14:44 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:14:44 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:14:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:14:50 IQ138000 NetworkManager[404]: <warn>  [1760717690.5009] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:14:50 IQ138000 NetworkManager[404]: <info>  [1760717690.5011] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:14:50 IQ138000 NetworkManager[404]: <warn>  [1760717690.5054] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:14:50 IQ138000 NetworkManager[404]: <info>  [1760717690.5069] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:14:50 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/47
Oct 17 16:14:50 IQ138000 NetworkManager[404]: <info>  [1760717690.5498] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:14:50 IQ138000 NetworkManager[404]: <info>  [1760717690.5500] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:14:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:14:52 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:14:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:14:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:14:56 IQ138000 NetworkManager[404]: <info>  [1760717696.3943] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:15:01 IQ138000 CRON[13338]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 16:15:01 IQ138000 CRON[13342]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 17 16:15:01 IQ138000 CRON[13338]: pam_unix(cron:session): session closed for user root
Oct 17 16:15:03 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:15:04 IQ138000 wb-watchdog[13374]: [INFO] Interval #62 started. Waiting up to 60 seconds for error...
Oct 17 16:15:09 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:15:14 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:15:14 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:15:14 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:15:14 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:15:14 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:15:14 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:15:14 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:15:14 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:15:14 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:15:14 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:15:14 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:15:14 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:15:14 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:15:14 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:15:14 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:15:14 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:15:14 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:15:14 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:15:14 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:15:14 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:15:14 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:15:14 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:15:14 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:15:14 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:15:14 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:15:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:15:14 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:15:14 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:15:14 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:15:14 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:15:14 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:15:14 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:15:14 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:15:14 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:15:14 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:15:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 9216 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:15:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:15:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:15:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:15:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:15:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17674 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:15:38 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:15:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:15:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:15:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:15:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:15:43 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 12872 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:15:44 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:15:44 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:15:44 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:15:44 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:15:44 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:15:44 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:15:44 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:15:44 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:15:44 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:15:44 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:15:44 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:15:44 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:15:44 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:15:44 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:15:44 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:15:44 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:15:44 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:15:44 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:15:44 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:15:44 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:15:44 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:15:44 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:15:44 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:15:44 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:15:44 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:15:44 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:15:44 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:15:44 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:15:44 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:15:44 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:15:44 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:15:44 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:15:44 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:15:44 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:15:44 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8344] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8350] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8356] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8429] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8460] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8473] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8614] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8650] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8667] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8672] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8680] Config: added 'scan_ssid' value '1'
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8681] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8682] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.8683] Config: added 'psk' value '<hidden>'
Oct 17 16:15:51 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/48
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.9440] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:15:51 IQ138000 NetworkManager[404]: <info>  [1760717751.9442] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:15:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:02 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:04 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:04 IQ138000 wb-watchdog[13987]: [INFO] Interval #63 started. Waiting up to 60 seconds for error...
Oct 17 16:16:10 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 14 input(s) @ 17162 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:14 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:16:14 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:16:14 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:16:14 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:16:14 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:16:14 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:16:14 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:16:14 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:16:14 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:16:14 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:16:14 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:16:14 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:16:14 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:16:14 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:16:14 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:16:14 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:16:14 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:16:14 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:16:14 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:16:14 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:16:14 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:16:14 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:16:14 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:16:14 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:16:14 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:16:14 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:16:14 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:16:14 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:16:14 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:16:14 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:16:14 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:16:14 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:16:14 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:16:14 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:16:14 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:16:17 IQ138000 NetworkManager[404]: <warn>  [1760717777.5006] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:16:17 IQ138000 NetworkManager[404]: <info>  [1760717777.5007] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:16:17 IQ138000 NetworkManager[404]: <warn>  [1760717777.5038] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:16:17 IQ138000 NetworkManager[404]: <info>  [1760717777.5052] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:16:17 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/48
Oct 17 16:16:17 IQ138000 NetworkManager[404]: <info>  [1760717777.5409] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:16:17 IQ138000 NetworkManager[404]: <info>  [1760717777.5411] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:16:23 IQ138000 NetworkManager[404]: <info>  [1760717783.6017] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:16:28 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:16:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:16:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13582 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:34 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:16:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8752 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:45 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:16:45 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:16:45 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:16:45 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:16:45 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:16:45 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:16:45 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:16:45 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:16:45 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:16:45 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:16:45 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:16:45 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:16:45 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:16:45 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:16:45 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:16:45 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:16:45 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:16:45 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:16:45 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:16:45 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:16:45 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:16:45 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:16:45 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:16:45 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:16:45 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:16:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:16:45 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:16:45 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:16:45 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:16:45 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:16:45 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:16:45 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:16:45 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:16:45 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:16:45 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:16:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 13590 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 17168 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:16:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 13072 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:17:01 IQ138000 CRON[14660]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Oct 17 16:17:01 IQ138000 CRON[14664]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Oct 17 16:17:01 IQ138000 CRON[14660]: pam_unix(cron:session): session closed for user root
Oct 17 16:17:04 IQ138000 wb-watchdog[14692]: [INFO] Interval #64 started. Waiting up to 60 seconds for error...
Oct 17 16:17:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:17:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:17:15 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:17:15 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:17:15 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:17:15 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:17:15 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:17:15 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:17:15 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:17:15 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:17:15 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:17:15 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:17:15 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:17:15 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:17:15 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:17:15 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:17:15 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:17:15 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:17:15 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:17:15 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:17:15 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:17:15 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:17:15 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:17:15 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:17:15 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:17:15 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:17:15 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:17:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:17:15 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:17:15 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:17:15 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:17:15 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:17:15 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:17:15 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:17:15 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:17:15 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:17:15 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9453] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9498] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9506] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9560] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9587] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9591] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9687] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9705] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9768] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9772] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9773] Config: added 'scan_ssid' value '1'
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9774] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9775] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:17:18 IQ138000 NetworkManager[404]: <info>  [1760717838.9784] Config: added 'psk' value '<hidden>'
Oct 17 16:17:18 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/49
Oct 17 16:17:19 IQ138000 NetworkManager[404]: <info>  [1760717839.0564] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:17:19 IQ138000 NetworkManager[404]: <info>  [1760717839.0566] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:17:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 18194 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:17:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:17:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:17:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:17:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:17:44 IQ138000 NetworkManager[404]: <warn>  [1760717864.5001] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:17:44 IQ138000 NetworkManager[404]: <info>  [1760717864.5003] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:17:44 IQ138000 NetworkManager[404]: <warn>  [1760717864.5029] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:17:44 IQ138000 NetworkManager[404]: <info>  [1760717864.5041] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:17:44 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 16:17:44 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/49
Oct 17 16:17:44 IQ138000 NetworkManager[404]: <info>  [1760717864.5470] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:17:44 IQ138000 NetworkManager[404]: <info>  [1760717864.5472] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:17:45 IQ138000 wpa_supplicant[382]: wlan1: Reject scan trigger since one is already pending
Oct 17 16:17:45 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:17:45 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:17:45 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:17:45 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:17:45 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:17:45 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:17:45 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:17:45 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:17:45 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:17:45 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:17:45 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:17:45 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:17:45 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:17:45 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:17:45 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:17:45 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:17:45 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:17:45 IQ138000 python3[1999]:            |       signal quality: 90% (recent)
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:17:45 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:17:45 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:17:45 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:17:45 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:17:45 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:17:45 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:17:45 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:17:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:17:45 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:17:45 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:17:45 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:17:45 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:17:45 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:17:45 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:17:45 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:17:45 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:17:45 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:17:50 IQ138000 NetworkManager[404]: <info>  [1760717870.7433] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:17:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:17:53 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:17:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:17:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:17:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 8982 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:04 IQ138000 wb-watchdog[15299]: [INFO] Interval #65 started. Waiting up to 60 seconds for error...
Oct 17 16:18:15 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:18:15 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:18:15 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:18:15 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:18:15 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:18:15 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:18:15 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:18:15 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:18:15 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:18:15 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:18:15 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:18:15 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:18:15 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:18:15 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:18:15 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:18:15 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:18:15 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:18:15 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:18:15 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:18:15 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:18:15 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:18:15 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:18:15 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:18:15 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:18:15 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:18:15 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:18:15 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:18:15 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:18:15 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:18:15 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:18:15 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:18:15 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:18:15 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:18:15 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:18:15 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:18:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 8704 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:22 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 17430 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 7 input(s) @ 4341 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 8 input(s) @ 8976 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:45 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:18:45 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:18:45 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:18:45 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:18:45 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:18:45 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:18:45 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:18:45 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:18:45 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:18:45 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:18:45 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:18:45 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:18:45 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:18:45 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:18:45 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:18:45 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:18:45 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:18:45 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:18:45 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:18:45 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:18:45 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:18:45 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:18:45 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:18:45 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:18:45 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:18:45 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:18:45 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:18:45 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:18:46 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:18:46 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:18:46 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:18:46 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:18:46 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:18:46 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:18:46 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:18:46 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:18:46 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0744] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0765] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:18:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0786] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0842] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0861] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0863] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0963] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.0983] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.1003] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.1006] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.1007] Config: added 'scan_ssid' value '1'
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.1008] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.1009] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:18:46 IQ138000 NetworkManager[404]: <info>  [1760717926.1010] Config: added 'psk' value '<hidden>'
Oct 17 16:18:46 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/50
Oct 17 16:18:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:18:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:18:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:18:49 IQ138000 NetworkManager[404]: <info>  [1760717929.1744] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:18:49 IQ138000 NetworkManager[404]: <info>  [1760717929.1746] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:18:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5398 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:18:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17670 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17682 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:04 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 NP energy L1, row count 7183, limit 7042
Oct 17 16:19:04 IQ138000 wb-watchdog[16007]: [INFO] Interval #66 started. Waiting up to 60 seconds for error...
Oct 17 16:19:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4612 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:19:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4886 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:11 IQ138000 NetworkManager[404]: <warn>  [1760717951.4997] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:19:11 IQ138000 NetworkManager[404]: <info>  [1760717951.4999] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:19:11 IQ138000 NetworkManager[404]: <warn>  [1760717951.5033] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:19:11 IQ138000 NetworkManager[404]: <info>  [1760717951.5049] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:19:11 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/50
Oct 17 16:19:11 IQ138000 NetworkManager[404]: <info>  [1760717951.5497] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:19:11 IQ138000 NetworkManager[404]: <info>  [1760717951.5499] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:19:15 IQ138000 reverse-ssh.sh[19605]: push 1
Oct 17 16:19:15 IQ138000 reverse-ssh.sh[19605]: push 2
Oct 17 16:19:16 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:19:16 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:19:16 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:19:16 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:19:16 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:19:16 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:19:16 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:19:16 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:19:16 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:19:16 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:19:16 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:19:16 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:19:16 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:19:16 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:19:16 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:19:16 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:19:16 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:19:16 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:19:16 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:19:16 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:19:16 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:19:16 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:19:16 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:19:16 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:19:16 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:19:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:19:16 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:19:16 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:19:16 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:19:16 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:19:16 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:19:16 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:19:16 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:19:16 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:19:16 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:19:16 IQ138000 reverse-ssh.sh[19605]: push 3
Oct 17 16:19:17 IQ138000 reverse-ssh.sh[19605]: push 4
Oct 17 16:19:17 IQ138000 reverse-ssh.sh[19605]: push 5
Oct 17 16:19:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:19:17 IQ138000 NetworkManager[404]: <info>  [1760717957.9661] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:19:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:19:24 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:25 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:19:29 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 4660 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:35 IQ138000 sshd[16201]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=127.0.0.1  user=root
Oct 17 16:19:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17152 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:37 IQ138000 sshd[16201]: Failed password for root from 127.0.0.1 port 34644 ssh2
Oct 17 16:19:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:19:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:42 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:44 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:46 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:19:46 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:19:46 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:19:46 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:19:46 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:19:46 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:19:46 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:19:46 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:19:46 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:19:46 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:19:46 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:19:46 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:19:46 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:19:46 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:19:46 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:19:46 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:19:46 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:19:46 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:19:46 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:19:46 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:19:46 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:19:46 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:19:46 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:19:46 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:19:46 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:19:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:19:46 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:19:46 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:19:46 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:19:46 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:19:46 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:19:46 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:19:46 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:19:46 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:19:46 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:19:47 IQ138000 sshd[16201]: Accepted password for root from 127.0.0.1 port 34644 ssh2
Oct 17 16:19:47 IQ138000 sshd[16201]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)
Oct 17 16:19:47 IQ138000 systemd[1]: Created slice User Slice of UID 0.
Oct 17 16:19:47 IQ138000 systemd[1]: Starting User Runtime Directory /run/user/0...
Oct 17 16:19:47 IQ138000 systemd-logind[353]: New session c1 of user root.
Oct 17 16:19:47 IQ138000 systemd[1]: Finished User Runtime Directory /run/user/0.
Oct 17 16:19:47 IQ138000 systemd[1]: Starting User Manager for UID 0...
Oct 17 16:19:47 IQ138000 systemd[16493]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)
Oct 17 16:19:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:19:48 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:48 IQ138000 systemd[16493]: Queued start job for default target Main User Target.
Oct 17 16:19:48 IQ138000 systemd[16493]: Created slice User Application Slice.
Oct 17 16:19:48 IQ138000 systemd[16493]: Reached target Paths.
Oct 17 16:19:48 IQ138000 systemd[16493]: Reached target Timers.
Oct 17 16:19:48 IQ138000 systemd[16493]: Listening on GnuPG network certificate management daemon.
Oct 17 16:19:48 IQ138000 systemd[16493]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Oct 17 16:19:48 IQ138000 systemd[16493]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Oct 17 16:19:48 IQ138000 systemd[16493]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Oct 17 16:19:48 IQ138000 systemd[16493]: Listening on GnuPG cryptographic agent and passphrase cache.
Oct 17 16:19:48 IQ138000 systemd[16493]: Reached target Sockets.
Oct 17 16:19:48 IQ138000 systemd[16493]: Reached target Basic System.
Oct 17 16:19:48 IQ138000 systemd[16493]: Reached target Main User Target.
Oct 17 16:19:48 IQ138000 systemd[16493]: Startup finished in 1.218s.
Oct 17 16:19:48 IQ138000 systemd[1]: Started User Manager for UID 0.
Oct 17 16:19:48 IQ138000 systemd[1]: Started Session c1 of user root.
Oct 17 16:19:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:19:54 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5138 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:19:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 12479 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:20:01 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17174 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:20:04 IQ138000 wb-watchdog[16810]: [INFO] Interval #67 started. Waiting up to 60 seconds for error...
Oct 17 16:20:05 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 4248 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:20:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:20:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.3755] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.3774] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.3788] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.3881] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.3902] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.3904] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4014] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4042] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4070] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4075] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4076] Config: added 'scan_ssid' value '1'
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4077] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4078] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4079] Config: added 'psk' value '<hidden>'
Oct 17 16:20:13 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/51
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4819] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:20:13 IQ138000 NetworkManager[404]: <info>  [1760718013.4821] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:20:16 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:20:16 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:20:16 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:20:16 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:20:16 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:20:16 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:20:16 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:20:16 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:20:16 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:20:16 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:20:16 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:20:16 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:20:16 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:20:16 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:20:16 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:20:16 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:20:16 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:20:16 IQ138000 python3[1999]:            |       signal quality: 93% (recent)
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:20:16 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:20:16 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:20:16 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:20:16 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:20:16 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:20:16 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:20:16 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:20:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:20:16 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:20:16 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:20:16 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:20:16 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:20:16 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:20:16 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:20:16 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:20:16 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:20:16 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:20:24 IQ138000 wb-mqtt-db[2031]: INFO: [dblogger] Channel data limit is reached: channel wb-map12h_58/Ch 3 RP energy L1, row count 7183, limit 7042
Oct 17 16:20:38 IQ138000 NetworkManager[404]: <warn>  [1760718038.5004] device (wlan1): Activation: (wifi) association took too long, failing activation
Oct 17 16:20:38 IQ138000 NetworkManager[404]: <info>  [1760718038.5006] device (wlan1): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Oct 17 16:20:38 IQ138000 NetworkManager[404]: <warn>  [1760718038.5050] device (wlan1): Activation: failed for connection 'ServiceAP'
Oct 17 16:20:38 IQ138000 NetworkManager[404]: <info>  [1760718038.5066] device (wlan1): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Oct 17 16:20:38 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:Remove active connection /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/51
Oct 17 16:20:38 IQ138000 NetworkManager[404]: <info>  [1760718038.5541] device (wlan1): supplicant interface state: scanning -> disconnected
Oct 17 16:20:38 IQ138000 NetworkManager[404]: <info>  [1760718038.5543] device (p2p-dev-wlan1): supplicant management interface state: scanning -> disconnected
Oct 17 16:20:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:20:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:20:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:20:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:20:44 IQ138000 NetworkManager[404]: <info>  [1760718044.1999] audit: op="connection-activate" uuid="91f1c71d-2d97-4675-886f-ecbe52b8451e" name="wb-eth0" pid=8767 uid=0 result="fail" reason="Connection 'wb-eth0' is not available on device eth0 because device has no carrier"
Oct 17 16:20:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:20:46 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:20:46 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:20:46 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:20:46 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:20:46 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:20:46 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:20:46 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:20:46 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:20:46 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:20:46 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:20:46 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:20:46 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:20:46 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:20:46 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:20:46 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:20:46 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:20:46 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:20:46 IQ138000 python3[1999]:            |       signal quality: 96% (recent)
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:20:46 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:20:46 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:20:46 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:20:46 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:20:46 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:20:46 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:20:46 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:20:46 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:20:46 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:20:46 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:20:46 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:20:46 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:20:46 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:20:46 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:20:46 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:20:46 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:20:46 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:20:49 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:20:50 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:20:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:20:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:04 IQ138000 wb-watchdog[17519]: [INFO] Interval #68 started. Waiting up to 60 seconds for error...
Oct 17 16:21:06 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:21:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:07 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:08 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:12 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 13312 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:16 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:21:16 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:21:16 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:21:16 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:21:16 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:21:16 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:21:16 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:21:16 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:21:16 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:21:16 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:21:16 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:21:16 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:21:16 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:21:16 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:21:16 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:21:16 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:21:16 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:21:16 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:21:16 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:21:16 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:21:16 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:21:16 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:21:16 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:21:16 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:16 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:21:16 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:21:17 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:21:17 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:17 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:21:17 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:21:17 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:21:17 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:21:17 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:21:17 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:21:17 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:21:17 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:21:17 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:21:17 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:21:17 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:21:17 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:21:18 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 7 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:19 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 4684 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:20 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 4878 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:23 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 9502 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:30 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:38: Serial protocol error: request timed out
Oct 17 16:21:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid data size
Oct 17 16:21:31 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:32 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:33 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:35 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:21:36 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 13334 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:37 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 1 input(s) @ 14098 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:39 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9135] device (wlan1): Activation: starting connection 'ServiceAP' (59ebc02d-e7c4-4b8f-87e7-003ed83482d5)
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9182] audit: op="connection-activate" uuid="59ebc02d-e7c4-4b8f-87e7-003ed83482d5" name="ServiceAP" pid=8767 uid=0 result="success"
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9192] device (wlan1): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9301] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9380] device (wlan1): Activation: (wifi) access point 'ServiceAP' has security, but secrets are required.
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9411] device (wlan1): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9608] device (wlan1): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9662] device (wlan1): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9679] device (wlan1): Activation: (wifi) connection 'ServiceAP' has security, and secrets exist.  No new secrets needed.
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9682] Config: added 'ssid' value 'service_iqnergy_ap'
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9683] Config: added 'scan_ssid' value '1'
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9684] Config: added 'bgscan' value 'simple:30:-70:86400'
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9686] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
Oct 17 16:21:39 IQ138000 NetworkManager[404]: <info>  [1760718099.9687] Config: added 'psk' value '<hidden>'
Oct 17 16:21:39 IQ138000 wb-mqtt-nm-helper[2088]: INFO:root:New active connection ServiceAP 59ebc02d-e7c4-4b8f-87e7-003ed83482d5 /org/freedesktop/NetworkManager/Settings/1 /org/freedesktop/NetworkManager/ActiveConnection/52
Oct 17 16:21:40 IQ138000 NetworkManager[404]: <info>  [1760718100.0484] device (wlan1): supplicant interface state: disconnected -> scanning
Oct 17 16:21:40 IQ138000 NetworkManager[404]: <info>  [1760718100.0488] device (p2p-dev-wlan1): supplicant management interface state: disconnected -> scanning
Oct 17 16:21:40 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:41 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:21:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 5406 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:45 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 32 coil(s) @ 5100 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:46 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5200 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:47 IQ138000 python3[1999]: Выполнение: mmcli -m wbc
Oct 17 16:21:47 IQ138000 python3[1999]: Команда "mmcli -m wbc" выполнена. Результат:
Oct 17 16:21:47 IQ138000 python3[1999]:    --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   General  |                 path: /org/freedesktop/ModemManager1/Modem/2
Oct 17 16:21:47 IQ138000 python3[1999]:            |            device id: 03e56e74a1dce638d7f19038b487cbb2eae11e49
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   Hardware |         manufacturer: INCORPORATED
Oct 17 16:21:47 IQ138000 python3[1999]:            |                model: A7602E-H
Oct 17 16:21:47 IQ138000 python3[1999]:            |    firmware revision: A50C4B08A7600M7
Oct 17 16:21:47 IQ138000 python3[1999]:            |            supported: gsm-umts
Oct 17 16:21:47 IQ138000 python3[1999]:            |              current: gsm-umts
Oct 17 16:21:47 IQ138000 python3[1999]:            |         equipment id: 860803062234204
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   System   |               device: wbc
Oct 17 16:21:47 IQ138000 python3[1999]:            |              drivers: option, rndis_host
Oct 17 16:21:47 IQ138000 python3[1999]:            |               plugin: simtech
Oct 17 16:21:47 IQ138000 python3[1999]:            |         primary port: ttyUSB1
Oct 17 16:21:47 IQ138000 python3[1999]:            |                ports: ttyUSB0 (ignored), ttyUSB1 (at), ttyUSB2 (at),
Oct 17 16:21:47 IQ138000 python3[1999]:            |                       ttyUSB3 (ignored), usb0 (net)
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   Status   |       unlock retries: sim-pin (3), sim-puk (10), sim-pin2 (3), sim-puk2 (10)
Oct 17 16:21:47 IQ138000 python3[1999]:            |                state: connected
Oct 17 16:21:47 IQ138000 python3[1999]:            |          power state: on
Oct 17 16:21:47 IQ138000 python3[1999]:            |          access tech: lte
Oct 17 16:21:47 IQ138000 python3[1999]:            |       signal quality: 100% (recent)
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   Modes    |            supported: allowed: any; preferred: none
Oct 17 16:21:47 IQ138000 python3[1999]:            |              current: allowed: any; preferred: none
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   IP       |            supported: ipv4, ipv6, ipv4v6
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   3GPP     |                 imei: 860803062234204
Oct 17 16:21:47 IQ138000 python3[1999]:            |          operator id: 25099
Oct 17 16:21:47 IQ138000 python3[1999]:            |        operator name: beeline
Oct 17 16:21:47 IQ138000 python3[1999]:            |         registration: home
Oct 17 16:21:47 IQ138000 python3[1999]:            | packet service state: attached
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   3GPP EPS | ue mode of operation: csps-1
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:21:47 IQ138000 python3[1999]:            |       sim slot paths: slot 1: /org/freedesktop/ModemManager1/SIM/2 (active)
Oct 17 16:21:47 IQ138000 python3[1999]:            |                       slot 2: none
Oct 17 16:21:47 IQ138000 python3[1999]:   --------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/2
Oct 17 16:21:47 IQ138000 python3[1999]: Выполнение: mmcli -i /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:21:47 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 coil(s) @ 5300 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:47 IQ138000 python3[1999]: Команда "mmcli -i /org/freedesktop/ModemManager1/SIM/2" выполнена. Результат:
Oct 17 16:21:47 IQ138000 python3[1999]:    -------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   General    |              path: /org/freedesktop/ModemManager1/SIM/2
Oct 17 16:21:47 IQ138000 python3[1999]:   -------------------------------
Oct 17 16:21:47 IQ138000 python3[1999]:   Properties |            active: yes
Oct 17 16:21:47 IQ138000 python3[1999]:              |              imsi: 250997340491874
Oct 17 16:21:47 IQ138000 python3[1999]:              |             iccid: 8970199210429593744
Oct 17 16:21:47 IQ138000 python3[1999]:              |       operator id: 25099
Oct 17 16:21:47 IQ138000 python3[1999]:              |     operator name: Beeline
Oct 17 16:21:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 16 input(s) @ 17408 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:51 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 17666 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:55 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 4 input(s) @ 4284 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:56 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 6 input(s) @ 4342 of device </dev/ttyRS485-1 9600 8 N 2> modbus:58: Serial protocol error: request timed out
Oct 17 16:21:57 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: malformed response: invalid crc
Oct 17 16:21:58 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 10 input(s) @ 5400 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
Oct 17 16:21:59 IQ138000 wb-mqtt-serial[1707]: WARNING: [modbus] failed to read 3 coil(s) @ 5000 of device </dev/ttyRS485-2 9600 8 N 2> modbus:208: Serial protocol error: request timed out
